mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 03:40:53 +07:00
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write to the TX FIFO (PUSHR) which means that it is not possible to devise a transfer procedure that makes full utilization of the FIFO depth (4 entries on most controllers, 16 entries on some). On the other hand, XSPI mode has a feature called "command cycling", which allows a single TX command to be run for a pre-specified number of TX words. When the command cycle ends, the Command Transfer Complete Flag bit asserts and raises an interrupt. The advantage in this mode is that the TX FIFO can be better utilized (more words can be batched at once). Other changes brought by this patch: - The dspi->rx_end variable has been removed, since now the dspi_fifo_write function sets up dspi->words_in_flight, so dspi_fifo_read knows how much to read without overrunning the RX buffer. - Stop using poll mode unconditionally for TCFQ mode, since XSPI mode is a little less efficient than that, and so, poll mode doesn't bring as many improvements for XSPI. - Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and instead increment the message->actual_length based on the newly introduced dspi->words_in_flight variable. - The CTARE register is now written in the hotpath instead of just at transfer init time, since it contains the DTCP field (transfer preload - the counter indicating how many txdata words will follow), which is a dynamic value. Due to the fact that the Chip Select toggling setting is part of the command written to the TX FIFO, the ending word of each buffer needs to be sent via its own TX command, so that we have a chance to emit a 1-word command with deasserted PCS. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
6a726824aa
commit
d59c90a240
@ -72,6 +72,7 @@
|
||||
#define SPI_RSER 0x30
|
||||
#define SPI_RSER_TCFQE BIT(31)
|
||||
#define SPI_RSER_EOQFE BIT(28)
|
||||
#define SPI_RSER_CMDTCFE BIT(23)
|
||||
|
||||
#define SPI_PUSHR 0x34
|
||||
#define SPI_PUSHR_CMD_CONT BIT(15)
|
||||
@ -114,14 +115,13 @@ struct chip_data {
|
||||
|
||||
enum dspi_trans_mode {
|
||||
DSPI_EOQ_MODE = 0,
|
||||
DSPI_TCFQ_MODE,
|
||||
DSPI_XSPI_MODE,
|
||||
DSPI_DMA_MODE,
|
||||
};
|
||||
|
||||
struct fsl_dspi_devtype_data {
|
||||
enum dspi_trans_mode trans_mode;
|
||||
u8 max_clock_factor;
|
||||
bool xspi_mode;
|
||||
int fifo_size;
|
||||
int dma_bufsize;
|
||||
};
|
||||
@ -147,37 +147,32 @@ static const struct fsl_dspi_devtype_data devtype_data[] = {
|
||||
},
|
||||
[LS1021A] = {
|
||||
/* Has A-011218 DMA erratum */
|
||||
.trans_mode = DSPI_TCFQ_MODE,
|
||||
.trans_mode = DSPI_XSPI_MODE,
|
||||
.max_clock_factor = 8,
|
||||
.xspi_mode = true,
|
||||
.fifo_size = 4,
|
||||
},
|
||||
[LS1012A] = {
|
||||
/* Has A-011218 DMA erratum */
|
||||
.trans_mode = DSPI_TCFQ_MODE,
|
||||
.trans_mode = DSPI_XSPI_MODE,
|
||||
.max_clock_factor = 8,
|
||||
.xspi_mode = true,
|
||||
.fifo_size = 16,
|
||||
},
|
||||
[LS1043A] = {
|
||||
/* Has A-011218 DMA erratum */
|
||||
.trans_mode = DSPI_TCFQ_MODE,
|
||||
.trans_mode = DSPI_XSPI_MODE,
|
||||
.max_clock_factor = 8,
|
||||
.xspi_mode = true,
|
||||
.fifo_size = 16,
|
||||
},
|
||||
[LS1046A] = {
|
||||
/* Has A-011218 DMA erratum */
|
||||
.trans_mode = DSPI_TCFQ_MODE,
|
||||
.trans_mode = DSPI_XSPI_MODE,
|
||||
.max_clock_factor = 8,
|
||||
.xspi_mode = true,
|
||||
.fifo_size = 16,
|
||||
},
|
||||
[LS2080A] = {
|
||||
.trans_mode = DSPI_DMA_MODE,
|
||||
.dma_bufsize = 8,
|
||||
.max_clock_factor = 8,
|
||||
.xspi_mode = true,
|
||||
.fifo_size = 4,
|
||||
},
|
||||
[LS2085A] = {
|
||||
@ -190,7 +185,6 @@ static const struct fsl_dspi_devtype_data devtype_data[] = {
|
||||
.trans_mode = DSPI_DMA_MODE,
|
||||
.dma_bufsize = 8,
|
||||
.max_clock_factor = 8,
|
||||
.xspi_mode = true,
|
||||
.fifo_size = 4,
|
||||
},
|
||||
[MCF5441X] = {
|
||||
@ -233,7 +227,6 @@ struct fsl_dspi {
|
||||
size_t len;
|
||||
const void *tx;
|
||||
void *rx;
|
||||
void *rx_end;
|
||||
u16 tx_cmd;
|
||||
u8 bits_per_word;
|
||||
u8 bytes_per_word;
|
||||
@ -243,6 +236,8 @@ struct fsl_dspi {
|
||||
u32 waitflags;
|
||||
|
||||
struct fsl_dspi_dma *dma;
|
||||
|
||||
int words_in_flight;
|
||||
};
|
||||
|
||||
/*
|
||||
@ -610,7 +605,17 @@ static void dspi_pushr_cmd_write(struct fsl_dspi *dspi)
|
||||
{
|
||||
u16 cmd = dspi->tx_cmd;
|
||||
|
||||
if (dspi->len > 0)
|
||||
/*
|
||||
* The only time when the PCS doesn't need continuation after this word
|
||||
* is when it's last. We need to look ahead, because we actually call
|
||||
* dspi_pop_tx (the function that decrements dspi->len) _after_
|
||||
* dspi_pushr_cmd_write with XSPI mode. As for how much in advance? One
|
||||
* word is enough. If there's more to transmit than that,
|
||||
* dspi_xspi_write will know to split the FIFO writes in 2, and
|
||||
* generate a new PUSHR command with the final word that will have PCS
|
||||
* deasserted (not continued) here.
|
||||
*/
|
||||
if (dspi->len > dspi->bytes_per_word)
|
||||
cmd |= SPI_PUSHR_CMD_CONT;
|
||||
regmap_write(dspi->regmap_pushr, PUSHR_CMD, cmd);
|
||||
}
|
||||
@ -620,24 +625,73 @@ static void dspi_pushr_txdata_write(struct fsl_dspi *dspi, u16 txdata)
|
||||
regmap_write(dspi->regmap_pushr, PUSHR_TX, txdata);
|
||||
}
|
||||
|
||||
static void dspi_tcfq_write(struct fsl_dspi *dspi)
|
||||
static void dspi_xspi_write(struct fsl_dspi *dspi, int cnt)
|
||||
{
|
||||
/* Clear transfer count */
|
||||
dspi->tx_cmd |= SPI_PUSHR_CMD_CTCNT;
|
||||
regmap_write(dspi->regmap, SPI_CTARE(0),
|
||||
SPI_FRAME_EBITS(dspi->bits_per_word) |
|
||||
SPI_CTARE_DTCP(cnt));
|
||||
|
||||
if (dspi->devtype_data->xspi_mode && dspi->bits_per_word > 16) {
|
||||
/* Write the CMD FIFO entry first, and then the two
|
||||
* corresponding TX FIFO entries.
|
||||
*/
|
||||
/*
|
||||
* Write the CMD FIFO entry first, and then the two
|
||||
* corresponding TX FIFO entries (or one...).
|
||||
*/
|
||||
dspi_pushr_cmd_write(dspi);
|
||||
|
||||
/* Fill TX FIFO with as many transfers as possible */
|
||||
while (cnt--) {
|
||||
u32 data = dspi_pop_tx(dspi);
|
||||
|
||||
dspi_pushr_cmd_write(dspi);
|
||||
dspi_pushr_txdata_write(dspi, data & 0xFFFF);
|
||||
dspi_pushr_txdata_write(dspi, data >> 16);
|
||||
} else {
|
||||
/* Write one entry to both TX FIFO and CMD FIFO
|
||||
* simultaneously.
|
||||
*/
|
||||
if (dspi->bits_per_word > 16)
|
||||
dspi_pushr_txdata_write(dspi, data >> 16);
|
||||
}
|
||||
}
|
||||
|
||||
static void dspi_xspi_fifo_write(struct fsl_dspi *dspi)
|
||||
{
|
||||
int num_fifo_entries = dspi->devtype_data->fifo_size;
|
||||
int bytes_in_flight;
|
||||
|
||||
/* In XSPI mode each 32-bit word occupies 2 TX FIFO entries */
|
||||
if (dspi->bits_per_word > 16)
|
||||
num_fifo_entries /= 2;
|
||||
|
||||
dspi->words_in_flight = dspi->len / dspi->bytes_per_word;
|
||||
|
||||
if (dspi->words_in_flight > num_fifo_entries)
|
||||
dspi->words_in_flight = num_fifo_entries;
|
||||
|
||||
bytes_in_flight = dspi->words_in_flight * dspi->bytes_per_word;
|
||||
|
||||
/*
|
||||
* If the PCS needs to de-assert (i.e. we're at the end of the buffer
|
||||
* and cs_change does not want the PCS to stay on), then we need a new
|
||||
* PUSHR command, since this one (for the body of the buffer)
|
||||
* necessarily has the CONT bit set.
|
||||
* So send one word less during this go, to force a split and a command
|
||||
* with a single word next time, when CONT will be unset.
|
||||
*/
|
||||
if (bytes_in_flight == dspi->len && dspi->words_in_flight > 1 &&
|
||||
!(dspi->tx_cmd & SPI_PUSHR_CMD_CONT))
|
||||
dspi->words_in_flight--;
|
||||
|
||||
dspi_xspi_write(dspi, dspi->words_in_flight);
|
||||
}
|
||||
|
||||
static void dspi_eoq_fifo_write(struct fsl_dspi *dspi)
|
||||
{
|
||||
int num_fifo_entries = dspi->devtype_data->fifo_size;
|
||||
u16 xfer_cmd = dspi->tx_cmd;
|
||||
|
||||
dspi->words_in_flight = num_fifo_entries;
|
||||
|
||||
/* Fill TX FIFO with as many transfers as possible */
|
||||
while (dspi->len && num_fifo_entries--) {
|
||||
dspi->tx_cmd = xfer_cmd;
|
||||
/* Request EOQF for last transfer in FIFO */
|
||||
if (dspi->len == dspi->bytes_per_word || num_fifo_entries == 0)
|
||||
dspi->tx_cmd |= SPI_PUSHR_CMD_EOQ;
|
||||
/* Write combined TX FIFO and CMD FIFO entry */
|
||||
dspi_pushr_write(dspi);
|
||||
}
|
||||
}
|
||||
@ -650,63 +704,36 @@ static u32 dspi_popr_read(struct fsl_dspi *dspi)
|
||||
return rxdata;
|
||||
}
|
||||
|
||||
static void dspi_tcfq_read(struct fsl_dspi *dspi)
|
||||
static void dspi_fifo_read(struct fsl_dspi *dspi)
|
||||
{
|
||||
dspi_push_rx(dspi, dspi_popr_read(dspi));
|
||||
}
|
||||
|
||||
static void dspi_eoq_write(struct fsl_dspi *dspi)
|
||||
{
|
||||
int fifo_size = dspi->devtype_data->fifo_size;
|
||||
u16 xfer_cmd = dspi->tx_cmd;
|
||||
|
||||
/* Fill TX FIFO with as many transfers as possible */
|
||||
while (dspi->len && fifo_size--) {
|
||||
dspi->tx_cmd = xfer_cmd;
|
||||
/* Request EOQF for last transfer in FIFO */
|
||||
if (dspi->len == dspi->bytes_per_word || fifo_size == 0)
|
||||
dspi->tx_cmd |= SPI_PUSHR_CMD_EOQ;
|
||||
/* Clear transfer count for first transfer in FIFO */
|
||||
if (fifo_size == (dspi->devtype_data->fifo_size - 1))
|
||||
dspi->tx_cmd |= SPI_PUSHR_CMD_CTCNT;
|
||||
/* Write combined TX FIFO and CMD FIFO entry */
|
||||
dspi_pushr_write(dspi);
|
||||
}
|
||||
}
|
||||
|
||||
static void dspi_eoq_read(struct fsl_dspi *dspi)
|
||||
{
|
||||
int fifo_size = dspi->devtype_data->fifo_size;
|
||||
|
||||
/* Read one FIFO entry and push to rx buffer */
|
||||
while ((dspi->rx < dspi->rx_end) && fifo_size--)
|
||||
while (dspi->words_in_flight--)
|
||||
dspi_push_rx(dspi, dspi_popr_read(dspi));
|
||||
}
|
||||
|
||||
static void dspi_fifo_write(struct fsl_dspi *dspi)
|
||||
{
|
||||
if (dspi->devtype_data->trans_mode == DSPI_EOQ_MODE)
|
||||
dspi_eoq_fifo_write(dspi);
|
||||
else
|
||||
dspi_xspi_fifo_write(dspi);
|
||||
}
|
||||
|
||||
static int dspi_rxtx(struct fsl_dspi *dspi)
|
||||
{
|
||||
struct spi_transfer *xfer = dspi->cur_transfer;
|
||||
struct spi_message *msg = dspi->cur_msg;
|
||||
enum dspi_trans_mode trans_mode;
|
||||
u16 spi_tcnt;
|
||||
u32 spi_tcr;
|
||||
int bytes_sent;
|
||||
|
||||
/* Update total number of bytes that were transferred */
|
||||
bytes_sent = dspi->words_in_flight * dspi->bytes_per_word;
|
||||
msg->actual_length += bytes_sent;
|
||||
dspi->progress += bytes_sent / DIV_ROUND_UP(xfer->bits_per_word, 8);
|
||||
|
||||
spi_take_timestamp_post(dspi->ctlr, dspi->cur_transfer,
|
||||
dspi->progress, !dspi->irq);
|
||||
|
||||
/* Get transfer counter (in number of SPI transfers). It was
|
||||
* reset to 0 when transfer(s) were started.
|
||||
*/
|
||||
regmap_read(dspi->regmap, SPI_TCR, &spi_tcr);
|
||||
spi_tcnt = SPI_TCR_GET_TCNT(spi_tcr);
|
||||
/* Update total number of bytes that were transferred */
|
||||
msg->actual_length += spi_tcnt * dspi->bytes_per_word;
|
||||
dspi->progress += spi_tcnt;
|
||||
|
||||
trans_mode = dspi->devtype_data->trans_mode;
|
||||
if (trans_mode == DSPI_EOQ_MODE)
|
||||
dspi_eoq_read(dspi);
|
||||
else if (trans_mode == DSPI_TCFQ_MODE)
|
||||
dspi_tcfq_read(dspi);
|
||||
dspi_fifo_read(dspi);
|
||||
|
||||
if (!dspi->len)
|
||||
/* Success! */
|
||||
@ -715,10 +742,7 @@ static int dspi_rxtx(struct fsl_dspi *dspi)
|
||||
spi_take_timestamp_pre(dspi->ctlr, dspi->cur_transfer,
|
||||
dspi->progress, !dspi->irq);
|
||||
|
||||
if (trans_mode == DSPI_EOQ_MODE)
|
||||
dspi_eoq_write(dspi);
|
||||
else if (trans_mode == DSPI_TCFQ_MODE)
|
||||
dspi_tcfq_write(dspi);
|
||||
dspi_fifo_write(dspi);
|
||||
|
||||
return -EINPROGRESS;
|
||||
}
|
||||
@ -732,7 +756,7 @@ static int dspi_poll(struct fsl_dspi *dspi)
|
||||
regmap_read(dspi->regmap, SPI_SR, &spi_sr);
|
||||
regmap_write(dspi->regmap, SPI_SR, spi_sr);
|
||||
|
||||
if (spi_sr & (SPI_SR_EOQF | SPI_SR_TCFQF))
|
||||
if (spi_sr & (SPI_SR_EOQF | SPI_SR_CMDTCF))
|
||||
break;
|
||||
} while (--tries);
|
||||
|
||||
@ -750,7 +774,7 @@ static irqreturn_t dspi_interrupt(int irq, void *dev_id)
|
||||
regmap_read(dspi->regmap, SPI_SR, &spi_sr);
|
||||
regmap_write(dspi->regmap, SPI_SR, spi_sr);
|
||||
|
||||
if (!(spi_sr & SPI_SR_EOQF))
|
||||
if (!(spi_sr & (SPI_SR_EOQF | SPI_SR_CMDTCF)))
|
||||
return IRQ_NONE;
|
||||
|
||||
if (dspi_rxtx(dspi) == 0) {
|
||||
@ -798,7 +822,6 @@ static int dspi_transfer_one_message(struct spi_controller *ctlr,
|
||||
|
||||
dspi->tx = transfer->tx_buf;
|
||||
dspi->rx = transfer->rx_buf;
|
||||
dspi->rx_end = dspi->rx + transfer->len;
|
||||
dspi->len = transfer->len;
|
||||
dspi->progress = 0;
|
||||
/* Validated transfer specific frame size (defaults applied) */
|
||||
@ -811,10 +834,6 @@ static int dspi_transfer_one_message(struct spi_controller *ctlr,
|
||||
regmap_write(dspi->regmap, SPI_CTAR(0),
|
||||
dspi->cur_chip->ctar_val |
|
||||
SPI_FRAME_BITS(transfer->bits_per_word));
|
||||
if (dspi->devtype_data->xspi_mode)
|
||||
regmap_write(dspi->regmap, SPI_CTARE(0),
|
||||
SPI_FRAME_EBITS(transfer->bits_per_word) |
|
||||
SPI_CTARE_DTCP(1));
|
||||
|
||||
spi_take_timestamp_pre(dspi->ctlr, dspi->cur_transfer,
|
||||
dspi->progress, !dspi->irq);
|
||||
@ -823,11 +842,11 @@ static int dspi_transfer_one_message(struct spi_controller *ctlr,
|
||||
switch (trans_mode) {
|
||||
case DSPI_EOQ_MODE:
|
||||
regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_EOQFE);
|
||||
dspi_eoq_write(dspi);
|
||||
dspi_fifo_write(dspi);
|
||||
break;
|
||||
case DSPI_TCFQ_MODE:
|
||||
regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_TCFQE);
|
||||
dspi_tcfq_write(dspi);
|
||||
case DSPI_XSPI_MODE:
|
||||
regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_CMDTCFE);
|
||||
dspi_fifo_write(dspi);
|
||||
break;
|
||||
case DSPI_DMA_MODE:
|
||||
regmap_write(dspi->regmap, SPI_RSER,
|
||||
@ -1053,16 +1072,13 @@ static void dspi_init(struct fsl_dspi *dspi)
|
||||
{
|
||||
unsigned int mcr = SPI_MCR_PCSIS;
|
||||
|
||||
if (dspi->devtype_data->xspi_mode)
|
||||
if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE)
|
||||
mcr |= SPI_MCR_XSPI;
|
||||
if (!spi_controller_is_slave(dspi->ctlr))
|
||||
mcr |= SPI_MCR_MASTER;
|
||||
|
||||
regmap_write(dspi->regmap, SPI_MCR, mcr);
|
||||
regmap_write(dspi->regmap, SPI_SR, SPI_SR_CLEAR);
|
||||
if (dspi->devtype_data->xspi_mode)
|
||||
regmap_write(dspi->regmap, SPI_CTARE(0),
|
||||
SPI_CTARE_FMSZE(0) | SPI_CTARE_DTCP(1));
|
||||
}
|
||||
|
||||
static int dspi_slave_abort(struct spi_master *master)
|
||||
@ -1162,7 +1178,7 @@ static int dspi_probe(struct platform_device *pdev)
|
||||
}
|
||||
}
|
||||
|
||||
if (dspi->devtype_data->xspi_mode)
|
||||
if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE)
|
||||
ctlr->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
|
||||
else
|
||||
ctlr->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
|
||||
@ -1174,7 +1190,7 @@ static int dspi_probe(struct platform_device *pdev)
|
||||
goto out_ctlr_put;
|
||||
}
|
||||
|
||||
if (dspi->devtype_data->xspi_mode)
|
||||
if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE)
|
||||
regmap_config = &dspi_xspi_regmap_config[0];
|
||||
else
|
||||
regmap_config = &dspi_regmap_config;
|
||||
@ -1186,7 +1202,7 @@ static int dspi_probe(struct platform_device *pdev)
|
||||
goto out_ctlr_put;
|
||||
}
|
||||
|
||||
if (dspi->devtype_data->xspi_mode) {
|
||||
if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE) {
|
||||
dspi->regmap_pushr = devm_regmap_init_mmio(
|
||||
&pdev->dev, base + SPI_PUSHR,
|
||||
&dspi_xspi_regmap_config[1]);
|
||||
@ -1211,9 +1227,6 @@ static int dspi_probe(struct platform_device *pdev)
|
||||
|
||||
dspi_init(dspi);
|
||||
|
||||
if (dspi->devtype_data->trans_mode == DSPI_TCFQ_MODE)
|
||||
goto poll_mode;
|
||||
|
||||
dspi->irq = platform_get_irq(pdev, 0);
|
||||
if (dspi->irq <= 0) {
|
||||
dev_info(&pdev->dev,
|
||||
|
Loading…
Reference in New Issue
Block a user