ARM: dts: rockchip: remove clock-names property from 'generic-ehci' nodes

A test with the command below gives for example this error:

arch/arm/boot/dts/rv1108-evb.dt.yaml: usb@30140000:
'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'

'clock-names' is not a valid property name for usb_host nodes with
compatible string 'generic-ehci', so remove them.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/generic-ehci.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200312171441.21144-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Johan Jonker 2020-03-12 18:14:38 +01:00 committed by Heiko Stuebner
parent 384fdcec30
commit d1068578ec
3 changed files with 0 additions and 6 deletions

View File

@ -728,7 +728,6 @@ usb_host0_ehci: usb@30080000 {
reg = <0x30080000 0x20000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST0>, <&u2phy0>;
clock-names = "usbhost", "utmi";
phys = <&u2phy0_host>;
phy-names = "usb";
status = "disabled";
@ -750,7 +749,6 @@ usb_host1_ehci: usb@300c0000 {
reg = <0x300c0000 0x20000>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST1>, <&u2phy1>;
clock-names = "usbhost", "utmi";
phys = <&u2phy1_otg>;
phy-names = "usb";
status = "disabled";
@ -774,7 +772,6 @@ usb_host2_ehci: usb@30100000 {
clocks = <&cru HCLK_HOST2>, <&u2phy1>;
phys = <&u2phy1_host>;
phy-names = "usb";
clock-names = "usbhost", "utmi";
status = "disabled";
};

View File

@ -609,7 +609,6 @@ usb_host0_ehci: usb@ff500000 {
reg = <0x0 0xff500000 0x0 0x100>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_USBHOST0>;
clock-names = "usbhost";
phys = <&usbphy1>;
phy-names = "usb";
status = "disabled";
@ -652,7 +651,6 @@ usb_hsic: usb@ff5c0000 {
reg = <0x0 0xff5c0000 0x0 0x100>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HSIC>;
clock-names = "usbhost";
status = "disabled";
};

View File

@ -494,7 +494,6 @@ usb_host_ehci: usb@30140000 {
reg = <0x30140000 0x20000>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST0>, <&u2phy>;
clock-names = "usbhost", "utmi";
phys = <&u2phy_host>;
phy-names = "usb";
status = "disabled";