mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 21:50:53 +07:00
Merge branches 'samsung/cleanup', 'samsung/exynos-clk' and 'samsung/exynos-clk2' into next/cleanup3
These are dependencies for the following Samsung branches Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
commit
cf2afdc59d
15
Documentation/devicetree/bindings/arm/samsung/pmu.txt
Normal file
15
Documentation/devicetree/bindings/arm/samsung/pmu.txt
Normal file
@ -0,0 +1,15 @@
|
||||
SAMSUNG Exynos SoC series PMU Registers
|
||||
|
||||
Properties:
|
||||
- compatible : should contain two values. First value must be one from following list:
|
||||
- "samsung,exynos5250-pmu" - for Exynos5250 SoC,
|
||||
- "samsung,exynos5420-pmu" - for Exynos5420 SoC.
|
||||
second value must be always "syscon".
|
||||
|
||||
- reg : offset and length of the register set.
|
||||
|
||||
Example :
|
||||
pmu_system_controller: system-controller@10040000 {
|
||||
compatible = "samsung,exynos5250-pmu", "syscon";
|
||||
reg = <0x10040000 0x5000>;
|
||||
};
|
||||
@ -15,259 +15,12 @@ Required Properties:
|
||||
|
||||
- #clock-cells: should be 1.
|
||||
|
||||
The following is the list of clocks generated by the controller. Each clock is
|
||||
assigned an identifier and client nodes use this identifier to specify the
|
||||
clock which they consume. Some of the clocks are available only on a particular
|
||||
Exynos4 SoC and this is specified where applicable.
|
||||
|
||||
|
||||
[Core Clocks]
|
||||
|
||||
Clock ID SoC (if specific)
|
||||
-----------------------------------------------
|
||||
|
||||
xxti 1
|
||||
xusbxti 2
|
||||
fin_pll 3
|
||||
fout_apll 4
|
||||
fout_mpll 5
|
||||
fout_epll 6
|
||||
fout_vpll 7
|
||||
sclk_apll 8
|
||||
sclk_mpll 9
|
||||
sclk_epll 10
|
||||
sclk_vpll 11
|
||||
arm_clk 12
|
||||
aclk200 13
|
||||
aclk100 14
|
||||
aclk160 15
|
||||
aclk133 16
|
||||
mout_mpll_user_t 17 Exynos4x12
|
||||
mout_mpll_user_c 18 Exynos4x12
|
||||
mout_core 19
|
||||
mout_apll 20
|
||||
|
||||
|
||||
[Clock Gate for Special Clocks]
|
||||
|
||||
Clock ID SoC (if specific)
|
||||
-----------------------------------------------
|
||||
|
||||
sclk_fimc0 128
|
||||
sclk_fimc1 129
|
||||
sclk_fimc2 130
|
||||
sclk_fimc3 131
|
||||
sclk_cam0 132
|
||||
sclk_cam1 133
|
||||
sclk_csis0 134
|
||||
sclk_csis1 135
|
||||
sclk_hdmi 136
|
||||
sclk_mixer 137
|
||||
sclk_dac 138
|
||||
sclk_pixel 139
|
||||
sclk_fimd0 140
|
||||
sclk_mdnie0 141 Exynos4412
|
||||
sclk_mdnie_pwm0 12 142 Exynos4412
|
||||
sclk_mipi0 143
|
||||
sclk_audio0 144
|
||||
sclk_mmc0 145
|
||||
sclk_mmc1 146
|
||||
sclk_mmc2 147
|
||||
sclk_mmc3 148
|
||||
sclk_mmc4 149
|
||||
sclk_sata 150 Exynos4210
|
||||
sclk_uart0 151
|
||||
sclk_uart1 152
|
||||
sclk_uart2 153
|
||||
sclk_uart3 154
|
||||
sclk_uart4 155
|
||||
sclk_audio1 156
|
||||
sclk_audio2 157
|
||||
sclk_spdif 158
|
||||
sclk_spi0 159
|
||||
sclk_spi1 160
|
||||
sclk_spi2 161
|
||||
sclk_slimbus 162
|
||||
sclk_fimd1 163 Exynos4210
|
||||
sclk_mipi1 164 Exynos4210
|
||||
sclk_pcm1 165
|
||||
sclk_pcm2 166
|
||||
sclk_i2s1 167
|
||||
sclk_i2s2 168
|
||||
sclk_mipihsi 169 Exynos4412
|
||||
sclk_mfc 170
|
||||
sclk_pcm0 171
|
||||
sclk_g3d 172
|
||||
sclk_pwm_isp 173 Exynos4x12
|
||||
sclk_spi0_isp 174 Exynos4x12
|
||||
sclk_spi1_isp 175 Exynos4x12
|
||||
sclk_uart_isp 176 Exynos4x12
|
||||
sclk_fimg2d 177
|
||||
|
||||
[Peripheral Clock Gates]
|
||||
|
||||
Clock ID SoC (if specific)
|
||||
-----------------------------------------------
|
||||
|
||||
fimc0 256
|
||||
fimc1 257
|
||||
fimc2 258
|
||||
fimc3 259
|
||||
csis0 260
|
||||
csis1 261
|
||||
jpeg 262
|
||||
smmu_fimc0 263
|
||||
smmu_fimc1 264
|
||||
smmu_fimc2 265
|
||||
smmu_fimc3 266
|
||||
smmu_jpeg 267
|
||||
vp 268
|
||||
mixer 269
|
||||
tvenc 270 Exynos4210
|
||||
hdmi 271
|
||||
smmu_tv 272
|
||||
mfc 273
|
||||
smmu_mfcl 274
|
||||
smmu_mfcr 275
|
||||
g3d 276
|
||||
g2d 277
|
||||
rotator 278 Exynos4210
|
||||
mdma 279 Exynos4210
|
||||
smmu_g2d 280 Exynos4210
|
||||
smmu_rotator 281 Exynos4210
|
||||
smmu_mdma 282 Exynos4210
|
||||
fimd0 283
|
||||
mie0 284
|
||||
mdnie0 285 Exynos4412
|
||||
dsim0 286
|
||||
smmu_fimd0 287
|
||||
fimd1 288 Exynos4210
|
||||
mie1 289 Exynos4210
|
||||
dsim1 290 Exynos4210
|
||||
smmu_fimd1 291 Exynos4210
|
||||
pdma0 292
|
||||
pdma1 293
|
||||
pcie_phy 294
|
||||
sata_phy 295 Exynos4210
|
||||
tsi 296
|
||||
sdmmc0 297
|
||||
sdmmc1 298
|
||||
sdmmc2 299
|
||||
sdmmc3 300
|
||||
sdmmc4 301
|
||||
sata 302 Exynos4210
|
||||
sromc 303
|
||||
usb_host 304
|
||||
usb_device 305
|
||||
pcie 306
|
||||
onenand 307
|
||||
nfcon 308
|
||||
smmu_pcie 309
|
||||
gps 310
|
||||
smmu_gps 311
|
||||
uart0 312
|
||||
uart1 313
|
||||
uart2 314
|
||||
uart3 315
|
||||
uart4 316
|
||||
i2c0 317
|
||||
i2c1 318
|
||||
i2c2 319
|
||||
i2c3 320
|
||||
i2c4 321
|
||||
i2c5 322
|
||||
i2c6 323
|
||||
i2c7 324
|
||||
i2c_hdmi 325
|
||||
tsadc 326
|
||||
spi0 327
|
||||
spi1 328
|
||||
spi2 329
|
||||
i2s1 330
|
||||
i2s2 331
|
||||
pcm0 332
|
||||
i2s0 333
|
||||
pcm1 334
|
||||
pcm2 335
|
||||
pwm 336
|
||||
slimbus 337
|
||||
spdif 338
|
||||
ac97 339
|
||||
modemif 340
|
||||
chipid 341
|
||||
sysreg 342
|
||||
hdmi_cec 343
|
||||
mct 344
|
||||
wdt 345
|
||||
rtc 346
|
||||
keyif 347
|
||||
audss 348
|
||||
mipi_hsi 349 Exynos4210
|
||||
mdma2 350 Exynos4210
|
||||
pixelasyncm0 351
|
||||
pixelasyncm1 352
|
||||
fimc_lite0 353 Exynos4x12
|
||||
fimc_lite1 354 Exynos4x12
|
||||
ppmuispx 355 Exynos4x12
|
||||
ppmuispmx 356 Exynos4x12
|
||||
fimc_isp 357 Exynos4x12
|
||||
fimc_drc 358 Exynos4x12
|
||||
fimc_fd 359 Exynos4x12
|
||||
mcuisp 360 Exynos4x12
|
||||
gicisp 361 Exynos4x12
|
||||
smmu_isp 362 Exynos4x12
|
||||
smmu_drc 363 Exynos4x12
|
||||
smmu_fd 364 Exynos4x12
|
||||
smmu_lite0 365 Exynos4x12
|
||||
smmu_lite1 366 Exynos4x12
|
||||
mcuctl_isp 367 Exynos4x12
|
||||
mpwm_isp 368 Exynos4x12
|
||||
i2c0_isp 369 Exynos4x12
|
||||
i2c1_isp 370 Exynos4x12
|
||||
mtcadc_isp 371 Exynos4x12
|
||||
pwm_isp 372 Exynos4x12
|
||||
wdt_isp 373 Exynos4x12
|
||||
uart_isp 374 Exynos4x12
|
||||
asyncaxim 375 Exynos4x12
|
||||
smmu_ispcx 376 Exynos4x12
|
||||
spi0_isp 377 Exynos4x12
|
||||
spi1_isp 378 Exynos4x12
|
||||
pwm_isp_sclk 379 Exynos4x12
|
||||
spi0_isp_sclk 380 Exynos4x12
|
||||
spi1_isp_sclk 381 Exynos4x12
|
||||
uart_isp_sclk 382 Exynos4x12
|
||||
tmu_apbif 383
|
||||
|
||||
[Mux Clocks]
|
||||
|
||||
Clock ID SoC (if specific)
|
||||
-----------------------------------------------
|
||||
|
||||
mout_fimc0 384
|
||||
mout_fimc1 385
|
||||
mout_fimc2 386
|
||||
mout_fimc3 387
|
||||
mout_cam0 388
|
||||
mout_cam1 389
|
||||
mout_csis0 390
|
||||
mout_csis1 391
|
||||
mout_g3d0 392
|
||||
mout_g3d1 393
|
||||
mout_g3d 394
|
||||
aclk400_mcuisp 395 Exynos4x12
|
||||
|
||||
[Div Clocks]
|
||||
|
||||
Clock ID SoC (if specific)
|
||||
-----------------------------------------------
|
||||
|
||||
div_isp0 450 Exynos4x12
|
||||
div_isp1 451 Exynos4x12
|
||||
div_mcuisp0 452 Exynos4x12
|
||||
div_mcuisp1 453 Exynos4x12
|
||||
div_aclk200 454 Exynos4x12
|
||||
div_aclk400_mcuisp 455 Exynos4x12
|
||||
Each clock is assigned an identifier and client nodes can use this identifier
|
||||
to specify the clock which they consume.
|
||||
|
||||
All available clocks are defined as preprocessor macros in
|
||||
dt-bindings/clock/exynos4.h header and can be used in device
|
||||
tree sources.
|
||||
|
||||
Example 1: An example of a clock controller node is listed below.
|
||||
|
||||
@ -285,6 +38,6 @@ Example 2: UART controller node that consumes the clock generated by the clock
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x13820000 0x100>;
|
||||
interrupts = <0 54 0>;
|
||||
clocks = <&clock 314>, <&clock 153>;
|
||||
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
||||
@ -13,163 +13,12 @@ Required Properties:
|
||||
|
||||
- #clock-cells: should be 1.
|
||||
|
||||
The following is the list of clocks generated by the controller. Each clock is
|
||||
assigned an identifier and client nodes use this identifier to specify the
|
||||
clock which they consume.
|
||||
|
||||
|
||||
[Core Clocks]
|
||||
|
||||
Clock ID
|
||||
----------------------------
|
||||
|
||||
fin_pll 1
|
||||
|
||||
[Clock Gate for Special Clocks]
|
||||
|
||||
Clock ID
|
||||
----------------------------
|
||||
|
||||
sclk_cam_bayer 128
|
||||
sclk_cam0 129
|
||||
sclk_cam1 130
|
||||
sclk_gscl_wa 131
|
||||
sclk_gscl_wb 132
|
||||
sclk_fimd1 133
|
||||
sclk_mipi1 134
|
||||
sclk_dp 135
|
||||
sclk_hdmi 136
|
||||
sclk_pixel 137
|
||||
sclk_audio0 138
|
||||
sclk_mmc0 139
|
||||
sclk_mmc1 140
|
||||
sclk_mmc2 141
|
||||
sclk_mmc3 142
|
||||
sclk_sata 143
|
||||
sclk_usb3 144
|
||||
sclk_jpeg 145
|
||||
sclk_uart0 146
|
||||
sclk_uart1 147
|
||||
sclk_uart2 148
|
||||
sclk_uart3 149
|
||||
sclk_pwm 150
|
||||
sclk_audio1 151
|
||||
sclk_audio2 152
|
||||
sclk_spdif 153
|
||||
sclk_spi0 154
|
||||
sclk_spi1 155
|
||||
sclk_spi2 156
|
||||
div_i2s1 157
|
||||
div_i2s2 158
|
||||
sclk_hdmiphy 159
|
||||
div_pcm0 160
|
||||
|
||||
|
||||
[Peripheral Clock Gates]
|
||||
|
||||
Clock ID
|
||||
----------------------------
|
||||
|
||||
gscl0 256
|
||||
gscl1 257
|
||||
gscl2 258
|
||||
gscl3 259
|
||||
gscl_wa 260
|
||||
gscl_wb 261
|
||||
smmu_gscl0 262
|
||||
smmu_gscl1 263
|
||||
smmu_gscl2 264
|
||||
smmu_gscl3 265
|
||||
mfc 266
|
||||
smmu_mfcl 267
|
||||
smmu_mfcr 268
|
||||
rotator 269
|
||||
jpeg 270
|
||||
mdma1 271
|
||||
smmu_rotator 272
|
||||
smmu_jpeg 273
|
||||
smmu_mdma1 274
|
||||
pdma0 275
|
||||
pdma1 276
|
||||
sata 277
|
||||
usbotg 278
|
||||
mipi_hsi 279
|
||||
sdmmc0 280
|
||||
sdmmc1 281
|
||||
sdmmc2 282
|
||||
sdmmc3 283
|
||||
sromc 284
|
||||
usb2 285
|
||||
usb3 286
|
||||
sata_phyctrl 287
|
||||
sata_phyi2c 288
|
||||
uart0 289
|
||||
uart1 290
|
||||
uart2 291
|
||||
uart3 292
|
||||
uart4 293
|
||||
i2c0 294
|
||||
i2c1 295
|
||||
i2c2 296
|
||||
i2c3 297
|
||||
i2c4 298
|
||||
i2c5 299
|
||||
i2c6 300
|
||||
i2c7 301
|
||||
i2c_hdmi 302
|
||||
adc 303
|
||||
spi0 304
|
||||
spi1 305
|
||||
spi2 306
|
||||
i2s1 307
|
||||
i2s2 308
|
||||
pcm1 309
|
||||
pcm2 310
|
||||
pwm 311
|
||||
spdif 312
|
||||
ac97 313
|
||||
hsi2c0 314
|
||||
hsi2c1 315
|
||||
hs12c2 316
|
||||
hs12c3 317
|
||||
chipid 318
|
||||
sysreg 319
|
||||
pmu 320
|
||||
cmu_top 321
|
||||
cmu_core 322
|
||||
cmu_mem 323
|
||||
tzpc0 324
|
||||
tzpc1 325
|
||||
tzpc2 326
|
||||
tzpc3 327
|
||||
tzpc4 328
|
||||
tzpc5 329
|
||||
tzpc6 330
|
||||
tzpc7 331
|
||||
tzpc8 332
|
||||
tzpc9 333
|
||||
hdmi_cec 334
|
||||
mct 335
|
||||
wdt 336
|
||||
rtc 337
|
||||
tmu 338
|
||||
fimd1 339
|
||||
mie1 340
|
||||
dsim0 341
|
||||
dp 342
|
||||
mixer 343
|
||||
hdmi 344
|
||||
g2d 345
|
||||
mdma0 346
|
||||
smmu_mdma0 347
|
||||
|
||||
|
||||
[Clock Muxes]
|
||||
|
||||
Clock ID
|
||||
----------------------------
|
||||
mout_hdmi 1024
|
||||
Each clock is assigned an identifier and client nodes can use this identifier
|
||||
to specify the clock which they consume.
|
||||
|
||||
All available clocks are defined as preprocessor macros in
|
||||
dt-bindings/clock/exynos5250.h header and can be used in device
|
||||
tree sources.
|
||||
|
||||
Example 1: An example of a clock controller node is listed below.
|
||||
|
||||
@ -187,6 +36,6 @@ Example 2: UART controller node that consumes the clock generated by the clock
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x13820000 0x100>;
|
||||
interrupts = <0 54 0>;
|
||||
clocks = <&clock 314>, <&clock 153>;
|
||||
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
||||
@ -13,184 +13,12 @@ Required Properties:
|
||||
|
||||
- #clock-cells: should be 1.
|
||||
|
||||
The following is the list of clocks generated by the controller. Each clock is
|
||||
assigned an identifier and client nodes use this identifier to specify the
|
||||
clock which they consume.
|
||||
Each clock is assigned an identifier and client nodes can use this identifier
|
||||
to specify the clock which they consume.
|
||||
|
||||
|
||||
[Core Clocks]
|
||||
|
||||
Clock ID
|
||||
----------------------------
|
||||
|
||||
fin_pll 1
|
||||
|
||||
[Clock Gate for Special Clocks]
|
||||
|
||||
Clock ID
|
||||
----------------------------
|
||||
sclk_uart0 128
|
||||
sclk_uart1 129
|
||||
sclk_uart2 130
|
||||
sclk_uart3 131
|
||||
sclk_mmc0 132
|
||||
sclk_mmc1 133
|
||||
sclk_mmc2 134
|
||||
sclk_spi0 135
|
||||
sclk_spi1 136
|
||||
sclk_spi2 137
|
||||
sclk_i2s1 138
|
||||
sclk_i2s2 139
|
||||
sclk_pcm1 140
|
||||
sclk_pcm2 141
|
||||
sclk_spdif 142
|
||||
sclk_hdmi 143
|
||||
sclk_pixel 144
|
||||
sclk_dp1 145
|
||||
sclk_mipi1 146
|
||||
sclk_fimd1 147
|
||||
sclk_maudio0 148
|
||||
sclk_maupcm0 149
|
||||
sclk_usbd300 150
|
||||
sclk_usbd301 151
|
||||
sclk_usbphy300 152
|
||||
sclk_usbphy301 153
|
||||
sclk_unipro 154
|
||||
sclk_pwm 155
|
||||
sclk_gscl_wa 156
|
||||
sclk_gscl_wb 157
|
||||
sclk_hdmiphy 158
|
||||
|
||||
[Peripheral Clock Gates]
|
||||
|
||||
Clock ID
|
||||
----------------------------
|
||||
|
||||
aclk66_peric 256
|
||||
uart0 257
|
||||
uart1 258
|
||||
uart2 259
|
||||
uart3 260
|
||||
i2c0 261
|
||||
i2c1 262
|
||||
i2c2 263
|
||||
i2c3 264
|
||||
i2c4 265
|
||||
i2c5 266
|
||||
i2c6 267
|
||||
i2c7 268
|
||||
i2c_hdmi 269
|
||||
tsadc 270
|
||||
spi0 271
|
||||
spi1 272
|
||||
spi2 273
|
||||
keyif 274
|
||||
i2s1 275
|
||||
i2s2 276
|
||||
pcm1 277
|
||||
pcm2 278
|
||||
pwm 279
|
||||
spdif 280
|
||||
i2c8 281
|
||||
i2c9 282
|
||||
i2c10 283
|
||||
aclk66_psgen 300
|
||||
chipid 301
|
||||
sysreg 302
|
||||
tzpc0 303
|
||||
tzpc1 304
|
||||
tzpc2 305
|
||||
tzpc3 306
|
||||
tzpc4 307
|
||||
tzpc5 308
|
||||
tzpc6 309
|
||||
tzpc7 310
|
||||
tzpc8 311
|
||||
tzpc9 312
|
||||
hdmi_cec 313
|
||||
seckey 314
|
||||
mct 315
|
||||
wdt 316
|
||||
rtc 317
|
||||
tmu 318
|
||||
tmu_gpu 319
|
||||
pclk66_gpio 330
|
||||
aclk200_fsys2 350
|
||||
mmc0 351
|
||||
mmc1 352
|
||||
mmc2 353
|
||||
sromc 354
|
||||
ufs 355
|
||||
aclk200_fsys 360
|
||||
tsi 361
|
||||
pdma0 362
|
||||
pdma1 363
|
||||
rtic 364
|
||||
usbh20 365
|
||||
usbd300 366
|
||||
usbd301 377
|
||||
aclk400_mscl 380
|
||||
mscl0 381
|
||||
mscl1 382
|
||||
mscl2 383
|
||||
smmu_mscl0 384
|
||||
smmu_mscl1 385
|
||||
smmu_mscl2 386
|
||||
aclk333 400
|
||||
mfc 401
|
||||
smmu_mfcl 402
|
||||
smmu_mfcr 403
|
||||
aclk200_disp1 410
|
||||
dsim1 411
|
||||
dp1 412
|
||||
hdmi 413
|
||||
aclk300_disp1 420
|
||||
fimd1 421
|
||||
smmu_fimd1 422
|
||||
aclk166 430
|
||||
mixer 431
|
||||
aclk266 440
|
||||
rotator 441
|
||||
mdma1 442
|
||||
smmu_rotator 443
|
||||
smmu_mdma1 444
|
||||
aclk300_jpeg 450
|
||||
jpeg 451
|
||||
jpeg2 452
|
||||
smmu_jpeg 453
|
||||
aclk300_gscl 460
|
||||
smmu_gscl0 461
|
||||
smmu_gscl1 462
|
||||
gscl_wa 463
|
||||
gscl_wb 464
|
||||
gscl0 465
|
||||
gscl1 466
|
||||
clk_3aa 467
|
||||
aclk266_g2d 470
|
||||
sss 471
|
||||
slim_sss 472
|
||||
mdma0 473
|
||||
aclk333_g2d 480
|
||||
g2d 481
|
||||
aclk333_432_gscl 490
|
||||
smmu_3aa 491
|
||||
smmu_fimcl0 492
|
||||
smmu_fimcl1 493
|
||||
smmu_fimcl3 494
|
||||
fimc_lite3 495
|
||||
aclk_g3d 500
|
||||
g3d 501
|
||||
smmu_mixer 502
|
||||
|
||||
Mux ID
|
||||
----------------------------
|
||||
|
||||
mout_hdmi 640
|
||||
|
||||
Divider ID
|
||||
----------------------------
|
||||
|
||||
dout_pixel 768
|
||||
All available clocks are defined as preprocessor macros in
|
||||
dt-bindings/clock/exynos5420.h header and can be used in device
|
||||
tree sources.
|
||||
|
||||
Example 1: An example of a clock controller node is listed below.
|
||||
|
||||
@ -208,6 +36,6 @@ Example 2: UART controller node that consumes the clock generated by the clock
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x13820000 0x100>;
|
||||
interrupts = <0 54 0>;
|
||||
clocks = <&clock 259>, <&clock 130>;
|
||||
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
||||
@ -12,45 +12,12 @@ Required Properties:
|
||||
|
||||
- #clock-cells: should be 1.
|
||||
|
||||
The following is the list of clocks generated by the controller. Each clock is
|
||||
assigned an identifier and client nodes use this identifier to specify the
|
||||
clock which they consume.
|
||||
Each clock is assigned an identifier and client nodes can use this identifier
|
||||
to specify the clock which they consume.
|
||||
|
||||
|
||||
[Core Clocks]
|
||||
|
||||
Clock ID
|
||||
----------------------------
|
||||
|
||||
xtal 1
|
||||
arm_clk 2
|
||||
|
||||
[Peripheral Clock Gates]
|
||||
|
||||
Clock ID
|
||||
----------------------------
|
||||
|
||||
spi_baud 16
|
||||
pb0_250 17
|
||||
pr0_250 18
|
||||
pr1_250 19
|
||||
b_250 20
|
||||
b_125 21
|
||||
b_200 22
|
||||
sata 23
|
||||
usb 24
|
||||
gmac0 25
|
||||
cs250 26
|
||||
pb0_250_o 27
|
||||
pr0_250_o 28
|
||||
pr1_250_o 29
|
||||
b_250_o 30
|
||||
b_125_o 31
|
||||
b_200_o 32
|
||||
sata_o 33
|
||||
usb_o 34
|
||||
gmac0_o 35
|
||||
cs250_o 36
|
||||
All available clocks are defined as preprocessor macros in
|
||||
dt-bindings/clock/exynos5440.h header and can be used in device
|
||||
tree sources.
|
||||
|
||||
Example: An example of a clock controller node is listed below.
|
||||
|
||||
|
||||
@ -1145,7 +1145,7 @@ config DEBUG_UART_8250_FLOW_CONTROL
|
||||
|
||||
config DEBUG_UNCOMPRESS
|
||||
bool
|
||||
depends on ARCH_MULTIPLATFORM || ARCH_MSM
|
||||
depends on ARCH_MULTIPLATFORM || ARCH_MSM || ARCH_EXYNOS
|
||||
default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
|
||||
(!DEBUG_TEGRA_UART || !ZBOOT_ROM)
|
||||
help
|
||||
@ -1161,7 +1161,8 @@ config DEBUG_UNCOMPRESS
|
||||
|
||||
config UNCOMPRESS_INCLUDE
|
||||
string
|
||||
default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM
|
||||
default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
|
||||
ARCH_EXYNOS
|
||||
default "mach/uncompress.h"
|
||||
|
||||
config EARLY_PRINTK
|
||||
|
||||
@ -19,6 +19,7 @@
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/clock/exynos4.h>
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
@ -119,7 +120,7 @@ fimc_0: fimc@11800000 {
|
||||
compatible = "samsung,exynos4210-fimc";
|
||||
reg = <0x11800000 0x1000>;
|
||||
interrupts = <0 84 0>;
|
||||
clocks = <&clock 256>, <&clock 128>;
|
||||
clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
|
||||
clock-names = "fimc", "sclk_fimc";
|
||||
samsung,power-domain = <&pd_cam>;
|
||||
samsung,sysreg = <&sys_reg>;
|
||||
@ -130,7 +131,7 @@ fimc_1: fimc@11810000 {
|
||||
compatible = "samsung,exynos4210-fimc";
|
||||
reg = <0x11810000 0x1000>;
|
||||
interrupts = <0 85 0>;
|
||||
clocks = <&clock 257>, <&clock 129>;
|
||||
clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
|
||||
clock-names = "fimc", "sclk_fimc";
|
||||
samsung,power-domain = <&pd_cam>;
|
||||
samsung,sysreg = <&sys_reg>;
|
||||
@ -141,7 +142,7 @@ fimc_2: fimc@11820000 {
|
||||
compatible = "samsung,exynos4210-fimc";
|
||||
reg = <0x11820000 0x1000>;
|
||||
interrupts = <0 86 0>;
|
||||
clocks = <&clock 258>, <&clock 130>;
|
||||
clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
|
||||
clock-names = "fimc", "sclk_fimc";
|
||||
samsung,power-domain = <&pd_cam>;
|
||||
samsung,sysreg = <&sys_reg>;
|
||||
@ -152,7 +153,7 @@ fimc_3: fimc@11830000 {
|
||||
compatible = "samsung,exynos4210-fimc";
|
||||
reg = <0x11830000 0x1000>;
|
||||
interrupts = <0 87 0>;
|
||||
clocks = <&clock 259>, <&clock 131>;
|
||||
clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
|
||||
clock-names = "fimc", "sclk_fimc";
|
||||
samsung,power-domain = <&pd_cam>;
|
||||
samsung,sysreg = <&sys_reg>;
|
||||
@ -163,7 +164,7 @@ csis_0: csis@11880000 {
|
||||
compatible = "samsung,exynos4210-csis";
|
||||
reg = <0x11880000 0x4000>;
|
||||
interrupts = <0 78 0>;
|
||||
clocks = <&clock 260>, <&clock 134>;
|
||||
clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
|
||||
clock-names = "csis", "sclk_csis";
|
||||
bus-width = <4>;
|
||||
samsung,power-domain = <&pd_cam>;
|
||||
@ -178,7 +179,7 @@ csis_1: csis@11890000 {
|
||||
compatible = "samsung,exynos4210-csis";
|
||||
reg = <0x11890000 0x4000>;
|
||||
interrupts = <0 80 0>;
|
||||
clocks = <&clock 261>, <&clock 135>;
|
||||
clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
|
||||
clock-names = "csis", "sclk_csis";
|
||||
bus-width = <2>;
|
||||
samsung,power-domain = <&pd_cam>;
|
||||
@ -194,7 +195,7 @@ watchdog@10060000 {
|
||||
compatible = "samsung,s3c2410-wdt";
|
||||
reg = <0x10060000 0x100>;
|
||||
interrupts = <0 43 0>;
|
||||
clocks = <&clock 345>;
|
||||
clocks = <&clock CLK_WDT>;
|
||||
clock-names = "watchdog";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -203,7 +204,7 @@ rtc@10070000 {
|
||||
compatible = "samsung,s3c6410-rtc";
|
||||
reg = <0x10070000 0x100>;
|
||||
interrupts = <0 44 0>, <0 45 0>;
|
||||
clocks = <&clock 346>;
|
||||
clocks = <&clock CLK_RTC>;
|
||||
clock-names = "rtc";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -212,7 +213,7 @@ keypad@100A0000 {
|
||||
compatible = "samsung,s5pv210-keypad";
|
||||
reg = <0x100A0000 0x100>;
|
||||
interrupts = <0 109 0>;
|
||||
clocks = <&clock 347>;
|
||||
clocks = <&clock CLK_KEYIF>;
|
||||
clock-names = "keypad";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -221,7 +222,7 @@ sdhci@12510000 {
|
||||
compatible = "samsung,exynos4210-sdhci";
|
||||
reg = <0x12510000 0x100>;
|
||||
interrupts = <0 73 0>;
|
||||
clocks = <&clock 297>, <&clock 145>;
|
||||
clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
|
||||
clock-names = "hsmmc", "mmc_busclk.2";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -230,7 +231,7 @@ sdhci@12520000 {
|
||||
compatible = "samsung,exynos4210-sdhci";
|
||||
reg = <0x12520000 0x100>;
|
||||
interrupts = <0 74 0>;
|
||||
clocks = <&clock 298>, <&clock 146>;
|
||||
clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
|
||||
clock-names = "hsmmc", "mmc_busclk.2";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -239,7 +240,7 @@ sdhci@12530000 {
|
||||
compatible = "samsung,exynos4210-sdhci";
|
||||
reg = <0x12530000 0x100>;
|
||||
interrupts = <0 75 0>;
|
||||
clocks = <&clock 299>, <&clock 147>;
|
||||
clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
|
||||
clock-names = "hsmmc", "mmc_busclk.2";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -248,7 +249,7 @@ sdhci@12540000 {
|
||||
compatible = "samsung,exynos4210-sdhci";
|
||||
reg = <0x12540000 0x100>;
|
||||
interrupts = <0 76 0>;
|
||||
clocks = <&clock 300>, <&clock 148>;
|
||||
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
|
||||
clock-names = "hsmmc", "mmc_busclk.2";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -257,7 +258,7 @@ ehci@12580000 {
|
||||
compatible = "samsung,exynos4210-ehci";
|
||||
reg = <0x12580000 0x100>;
|
||||
interrupts = <0 70 0>;
|
||||
clocks = <&clock 304>;
|
||||
clocks = <&clock CLK_USB_HOST>;
|
||||
clock-names = "usbhost";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -266,7 +267,7 @@ ohci@12590000 {
|
||||
compatible = "samsung,exynos4210-ohci";
|
||||
reg = <0x12590000 0x100>;
|
||||
interrupts = <0 70 0>;
|
||||
clocks = <&clock 304>;
|
||||
clocks = <&clock CLK_USB_HOST>;
|
||||
clock-names = "usbhost";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -276,7 +277,7 @@ mfc: codec@13400000 {
|
||||
reg = <0x13400000 0x10000>;
|
||||
interrupts = <0 94 0>;
|
||||
samsung,power-domain = <&pd_mfc>;
|
||||
clocks = <&clock 273>;
|
||||
clocks = <&clock CLK_MFC>;
|
||||
clock-names = "mfc";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -285,7 +286,7 @@ serial@13800000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x13800000 0x100>;
|
||||
interrupts = <0 52 0>;
|
||||
clocks = <&clock 312>, <&clock 151>;
|
||||
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -294,7 +295,7 @@ serial@13810000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x13810000 0x100>;
|
||||
interrupts = <0 53 0>;
|
||||
clocks = <&clock 313>, <&clock 152>;
|
||||
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -303,7 +304,7 @@ serial@13820000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x13820000 0x100>;
|
||||
interrupts = <0 54 0>;
|
||||
clocks = <&clock 314>, <&clock 153>;
|
||||
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -312,7 +313,7 @@ serial@13830000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x13830000 0x100>;
|
||||
interrupts = <0 55 0>;
|
||||
clocks = <&clock 315>, <&clock 154>;
|
||||
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -323,7 +324,7 @@ i2c_0: i2c@13860000 {
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x13860000 0x100>;
|
||||
interrupts = <0 58 0>;
|
||||
clocks = <&clock 317>;
|
||||
clocks = <&clock CLK_I2C0>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_bus>;
|
||||
@ -336,7 +337,7 @@ i2c_1: i2c@13870000 {
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x13870000 0x100>;
|
||||
interrupts = <0 59 0>;
|
||||
clocks = <&clock 318>;
|
||||
clocks = <&clock CLK_I2C1>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_bus>;
|
||||
@ -349,7 +350,7 @@ i2c_2: i2c@13880000 {
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x13880000 0x100>;
|
||||
interrupts = <0 60 0>;
|
||||
clocks = <&clock 319>;
|
||||
clocks = <&clock CLK_I2C2>;
|
||||
clock-names = "i2c";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -360,7 +361,7 @@ i2c_3: i2c@13890000 {
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x13890000 0x100>;
|
||||
interrupts = <0 61 0>;
|
||||
clocks = <&clock 320>;
|
||||
clocks = <&clock CLK_I2C3>;
|
||||
clock-names = "i2c";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -371,7 +372,7 @@ i2c_4: i2c@138A0000 {
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x138A0000 0x100>;
|
||||
interrupts = <0 62 0>;
|
||||
clocks = <&clock 321>;
|
||||
clocks = <&clock CLK_I2C4>;
|
||||
clock-names = "i2c";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -382,7 +383,7 @@ i2c_5: i2c@138B0000 {
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x138B0000 0x100>;
|
||||
interrupts = <0 63 0>;
|
||||
clocks = <&clock 322>;
|
||||
clocks = <&clock CLK_I2C5>;
|
||||
clock-names = "i2c";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -393,7 +394,7 @@ i2c_6: i2c@138C0000 {
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x138C0000 0x100>;
|
||||
interrupts = <0 64 0>;
|
||||
clocks = <&clock 323>;
|
||||
clocks = <&clock CLK_I2C6>;
|
||||
clock-names = "i2c";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -404,7 +405,7 @@ i2c_7: i2c@138D0000 {
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x138D0000 0x100>;
|
||||
interrupts = <0 65 0>;
|
||||
clocks = <&clock 324>;
|
||||
clocks = <&clock CLK_I2C7>;
|
||||
clock-names = "i2c";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -417,7 +418,7 @@ spi_0: spi@13920000 {
|
||||
dma-names = "tx", "rx";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 327>, <&clock 159>;
|
||||
clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
|
||||
clock-names = "spi", "spi_busclk0";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_bus>;
|
||||
@ -432,7 +433,7 @@ spi_1: spi@13930000 {
|
||||
dma-names = "tx", "rx";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 328>, <&clock 160>;
|
||||
clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
|
||||
clock-names = "spi", "spi_busclk0";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi1_bus>;
|
||||
@ -447,7 +448,7 @@ spi_2: spi@13940000 {
|
||||
dma-names = "tx", "rx";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 329>, <&clock 161>;
|
||||
clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
|
||||
clock-names = "spi", "spi_busclk0";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2_bus>;
|
||||
@ -458,7 +459,7 @@ pwm@139D0000 {
|
||||
compatible = "samsung,exynos4210-pwm";
|
||||
reg = <0x139D0000 0x1000>;
|
||||
interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
|
||||
clocks = <&clock 336>;
|
||||
clocks = <&clock CLK_PWM>;
|
||||
clock-names = "timers";
|
||||
#pwm-cells = <2>;
|
||||
status = "disabled";
|
||||
@ -475,7 +476,7 @@ pdma0: pdma@12680000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x12680000 0x1000>;
|
||||
interrupts = <0 35 0>;
|
||||
clocks = <&clock 292>;
|
||||
clocks = <&clock CLK_PDMA0>;
|
||||
clock-names = "apb_pclk";
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <8>;
|
||||
@ -486,7 +487,7 @@ pdma1: pdma@12690000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x12690000 0x1000>;
|
||||
interrupts = <0 36 0>;
|
||||
clocks = <&clock 293>;
|
||||
clocks = <&clock CLK_PDMA1>;
|
||||
clock-names = "apb_pclk";
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <8>;
|
||||
@ -497,7 +498,7 @@ mdma1: mdma@12850000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x12850000 0x1000>;
|
||||
interrupts = <0 34 0>;
|
||||
clocks = <&clock 279>;
|
||||
clocks = <&clock CLK_MDMA>;
|
||||
clock-names = "apb_pclk";
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <8>;
|
||||
@ -511,7 +512,7 @@ fimd: fimd@11c00000 {
|
||||
reg = <0x11c00000 0x20000>;
|
||||
interrupt-names = "fifo", "vsync", "lcd_sys";
|
||||
interrupts = <11 0>, <11 1>, <11 2>;
|
||||
clocks = <&clock 140>, <&clock 283>;
|
||||
clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
|
||||
clock-names = "sclk_fimd", "fimd";
|
||||
samsung,power-domain = <&pd_lcd0>;
|
||||
status = "disabled";
|
||||
|
||||
@ -53,7 +53,7 @@ mct@10050000 {
|
||||
reg = <0x10050000 0x800>;
|
||||
interrupt-parent = <&mct_map>;
|
||||
interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
|
||||
clocks = <&clock 3>, <&clock 344>;
|
||||
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
|
||||
clock-names = "fin_pll", "mct";
|
||||
|
||||
mct_map: mct-map {
|
||||
@ -109,7 +109,7 @@ tmu@100C0000 {
|
||||
interrupt-parent = <&combiner>;
|
||||
reg = <0x100C0000 0x100>;
|
||||
interrupts = <2 4>;
|
||||
clocks = <&clock 383>;
|
||||
clocks = <&clock CLK_TMU_APBIF>;
|
||||
clock-names = "tmu_apbif";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -118,13 +118,14 @@ g2d@12800000 {
|
||||
compatible = "samsung,s5pv210-g2d";
|
||||
reg = <0x12800000 0x1000>;
|
||||
interrupts = <0 89 0>;
|
||||
clocks = <&clock 177>, <&clock 277>;
|
||||
clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
|
||||
clock-names = "sclk_fimg2d", "fimg2d";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
camera {
|
||||
clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
|
||||
clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
|
||||
<&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
|
||||
clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
|
||||
|
||||
fimc_0: fimc@11800000 {
|
||||
|
||||
@ -251,7 +251,7 @@ buck1_reg: BUCK1 {
|
||||
buck2_reg: BUCK2 {
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
@ -459,8 +459,8 @@ buck1_reg: BUCK1 {
|
||||
|
||||
buck2_reg: BUCK2 {
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-min-microvolt = <925000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
op_mode = <1>; /* Normal Mode */
|
||||
|
||||
@ -47,7 +47,7 @@ mct@10050000 {
|
||||
reg = <0x10050000 0x800>;
|
||||
interrupt-parent = <&mct_map>;
|
||||
interrupts = <0>, <1>, <2>, <3>, <4>;
|
||||
clocks = <&clock 3>, <&clock 344>;
|
||||
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
|
||||
clock-names = "fin_pll", "mct";
|
||||
|
||||
mct_map: mct-map {
|
||||
@ -97,13 +97,14 @@ g2d@10800000 {
|
||||
compatible = "samsung,exynos4212-g2d";
|
||||
reg = <0x10800000 0x1000>;
|
||||
interrupts = <0 89 0>;
|
||||
clocks = <&clock 177>, <&clock 277>;
|
||||
clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
|
||||
clock-names = "sclk_fimg2d", "fimg2d";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
camera {
|
||||
clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
|
||||
clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
|
||||
<&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
|
||||
clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
|
||||
|
||||
fimc_0: fimc@11800000 {
|
||||
@ -145,7 +146,7 @@ fimc_lite_0: fimc-lite@12390000 {
|
||||
reg = <0x12390000 0x1000>;
|
||||
interrupts = <0 105 0>;
|
||||
samsung,power-domain = <&pd_isp>;
|
||||
clocks = <&clock 353>;
|
||||
clocks = <&clock CLK_FIMC_LITE0>;
|
||||
clock-names = "flite";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -155,7 +156,7 @@ fimc_lite_1: fimc-lite@123A0000 {
|
||||
reg = <0x123A0000 0x1000>;
|
||||
interrupts = <0 106 0>;
|
||||
samsung,power-domain = <&pd_isp>;
|
||||
clocks = <&clock 354>;
|
||||
clocks = <&clock CLK_FIMC_LITE1>;
|
||||
clock-names = "flite";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -165,12 +166,19 @@ fimc_is: fimc-is@12000000 {
|
||||
reg = <0x12000000 0x260000>;
|
||||
interrupts = <0 90 0>, <0 95 0>;
|
||||
samsung,power-domain = <&pd_isp>;
|
||||
clocks = <&clock 353>, <&clock 354>, <&clock 355>,
|
||||
<&clock 356>, <&clock 17>, <&clock 357>,
|
||||
<&clock 358>, <&clock 359>, <&clock 360>,
|
||||
<&clock 450>,<&clock 451>, <&clock 452>,
|
||||
<&clock 453>, <&clock 176>, <&clock 13>,
|
||||
<&clock 454>, <&clock 395>, <&clock 455>;
|
||||
clocks = <&clock CLK_FIMC_LITE0>,
|
||||
<&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
|
||||
<&clock CLK_PPMUISPMX>,
|
||||
<&clock CLK_MOUT_MPLL_USER_T>,
|
||||
<&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>,
|
||||
<&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>,
|
||||
<&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>,
|
||||
<&clock CLK_DIV_MCUISP0>,
|
||||
<&clock CLK_DIV_MCUISP1>,
|
||||
<&clock CLK_SCLK_UART_ISP>,
|
||||
<&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>,
|
||||
<&clock CLK_ACLK400_MCUISP>,
|
||||
<&clock CLK_DIV_ACLK400_MCUISP>;
|
||||
clock-names = "lite0", "lite1", "ppmuispx",
|
||||
"ppmuispmx", "mpll", "isp",
|
||||
"drc", "fd", "mcuisp",
|
||||
@ -190,7 +198,7 @@ pmu {
|
||||
i2c1_isp: i2c-isp@12140000 {
|
||||
compatible = "samsung,exynos4212-i2c-isp";
|
||||
reg = <0x12140000 0x100>;
|
||||
clocks = <&clock 370>;
|
||||
clocks = <&clock CLK_I2C1_ISP>;
|
||||
clock-names = "i2c_isp";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
@ -205,7 +213,7 @@ mshc_0: mmc@12550000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
fifo-depth = <0x80>;
|
||||
clocks = <&clock 301>, <&clock 149>;
|
||||
clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
|
||||
clock-names = "biu", "ciu";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@ -81,13 +81,6 @@ rtc@101E0000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "samsung,s3c2410-wdt";
|
||||
reg = <0x101D0000 0x100>;
|
||||
interrupts = <0 42 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
fimd@14400000 {
|
||||
compatible = "samsung,exynos5250-fimd";
|
||||
interrupt-parent = <&combiner>;
|
||||
|
||||
@ -25,6 +25,10 @@ chosen {
|
||||
bootargs = "console=ttySAC2,115200";
|
||||
};
|
||||
|
||||
rtc@101E0000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
codec@11000000 {
|
||||
samsung,mfc-r = <0x43000000 0x800000>;
|
||||
samsung,mfc-l = <0x51000000 0x800000>;
|
||||
|
||||
@ -27,6 +27,10 @@ chosen {
|
||||
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
|
||||
};
|
||||
|
||||
rtc@101E0000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c@12C60000 {
|
||||
samsung,i2c-sda-delay = <100>;
|
||||
samsung,i2c-max-bus-freq = <20000>;
|
||||
@ -36,6 +40,148 @@ eeprom@50 {
|
||||
compatible = "samsung,s524ad0xd1";
|
||||
reg = <0x50>;
|
||||
};
|
||||
|
||||
max77686@09 {
|
||||
compatible = "maxim,max77686";
|
||||
reg = <0x09>;
|
||||
|
||||
voltage-regulators {
|
||||
ldo1_reg: LDO1 {
|
||||
regulator-name = "P1.0V_LDO_OUT1";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo2_reg: LDO2 {
|
||||
regulator-name = "P1.2V_LDO_OUT2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo3_reg: LDO3 {
|
||||
regulator-name = "P1.8V_LDO_OUT3";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo4_reg: LDO4 {
|
||||
regulator-name = "P2.8V_LDO_OUT4";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
ldo5_reg: LDO5 {
|
||||
regulator-name = "P1.8V_LDO_OUT5";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo6_reg: LDO6 {
|
||||
regulator-name = "P1.1V_LDO_OUT6";
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo7_reg: LDO7 {
|
||||
regulator-name = "P1.1V_LDO_OUT7";
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo8_reg: LDO8 {
|
||||
regulator-name = "P1.0V_LDO_OUT8";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
};
|
||||
|
||||
ldo10_reg: LDO10 {
|
||||
regulator-name = "P1.8V_LDO_OUT10";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo11_reg: LDO11 {
|
||||
regulator-name = "P1.8V_LDO_OUT11";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo12_reg: LDO12 {
|
||||
regulator-name = "P3.0V_LDO_OUT12";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
ldo13_reg: LDO13 {
|
||||
regulator-name = "P1.8V_LDO_OUT13";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo14_reg: LDO14 {
|
||||
regulator-name = "P1.8V_LDO_OUT14";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo15_reg: LDO15 {
|
||||
regulator-name = "P1.0V_LDO_OUT15";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
};
|
||||
|
||||
ldo16_reg: LDO16 {
|
||||
regulator-name = "P1.8V_LDO_OUT16";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
buck1_reg: BUCK1 {
|
||||
regulator-name = "vdd_mif";
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck2_reg: BUCK2 {
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck3_reg: BUCK3 {
|
||||
regulator-name = "vdd_int";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck4_reg: BUCK4 {
|
||||
regulator-name = "vdd_g3d";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck5_reg: BUCK5 {
|
||||
regulator-name = "P1.8V_BUCK_OUT5";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vdd: fixed-regulator@0 {
|
||||
|
||||
@ -20,6 +20,10 @@ aliases {
|
||||
i2c104 = &i2c_104;
|
||||
};
|
||||
|
||||
rtc@101E0000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl@11400000 {
|
||||
sd3_clk: sd3-clk {
|
||||
samsung,pin-drv = <0>;
|
||||
|
||||
@ -17,6 +17,7 @@
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/clock/exynos5250.h>
|
||||
#include "exynos5.dtsi"
|
||||
#include "exynos5250-pinctrl.dtsi"
|
||||
|
||||
@ -90,7 +91,8 @@ clock_audss: audss-clock-controller@3810000 {
|
||||
compatible = "samsung,exynos5250-audss-clock";
|
||||
reg = <0x03810000 0x0C>;
|
||||
#clock-cells = <1>;
|
||||
clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>;
|
||||
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
|
||||
<&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
|
||||
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
|
||||
};
|
||||
|
||||
@ -115,7 +117,7 @@ mct@101C0000 {
|
||||
interrupt-parent = <&mct_map>;
|
||||
interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
|
||||
<4 0>, <5 0>;
|
||||
clocks = <&clock 1>, <&clock 335>;
|
||||
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
|
||||
clock-names = "fin_pll", "mct";
|
||||
|
||||
mct_map: mct-map {
|
||||
@ -167,16 +169,25 @@ pinctrl_3: pinctrl@03860000 {
|
||||
interrupts = <0 47 0>;
|
||||
};
|
||||
|
||||
watchdog {
|
||||
clocks = <&clock 336>;
|
||||
pmu_system_controller: system-controller@10040000 {
|
||||
compatible = "samsung,exynos5250-pmu", "syscon";
|
||||
reg = <0x10040000 0x5000>;
|
||||
};
|
||||
|
||||
watchdog@101D0000 {
|
||||
compatible = "samsung,exynos5250-wdt";
|
||||
reg = <0x101D0000 0x100>;
|
||||
interrupts = <0 42 0>;
|
||||
clocks = <&clock CLK_WDT>;
|
||||
clock-names = "watchdog";
|
||||
samsung,syscon-phandle = <&pmu_system_controller>;
|
||||
};
|
||||
|
||||
g2d@10850000 {
|
||||
compatible = "samsung,exynos5250-g2d";
|
||||
reg = <0x10850000 0x1000>;
|
||||
interrupts = <0 91 0>;
|
||||
clocks = <&clock 345>;
|
||||
clocks = <&clock CLK_G2D>;
|
||||
clock-names = "fimg2d";
|
||||
};
|
||||
|
||||
@ -185,41 +196,41 @@ codec@11000000 {
|
||||
reg = <0x11000000 0x10000>;
|
||||
interrupts = <0 96 0>;
|
||||
samsung,power-domain = <&pd_mfc>;
|
||||
clocks = <&clock 266>;
|
||||
clocks = <&clock CLK_MFC>;
|
||||
clock-names = "mfc";
|
||||
};
|
||||
|
||||
rtc@101E0000 {
|
||||
clocks = <&clock 337>;
|
||||
clocks = <&clock CLK_RTC>;
|
||||
clock-names = "rtc";
|
||||
status = "okay";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
tmu@10060000 {
|
||||
compatible = "samsung,exynos5250-tmu";
|
||||
reg = <0x10060000 0x100>;
|
||||
interrupts = <0 65 0>;
|
||||
clocks = <&clock 338>;
|
||||
clocks = <&clock CLK_TMU>;
|
||||
clock-names = "tmu_apbif";
|
||||
};
|
||||
|
||||
serial@12C00000 {
|
||||
clocks = <&clock 289>, <&clock 146>;
|
||||
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
||||
serial@12C10000 {
|
||||
clocks = <&clock 290>, <&clock 147>;
|
||||
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
||||
serial@12C20000 {
|
||||
clocks = <&clock 291>, <&clock 148>;
|
||||
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
||||
serial@12C30000 {
|
||||
clocks = <&clock 292>, <&clock 149>;
|
||||
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
||||
@ -227,7 +238,7 @@ sata@122F0000 {
|
||||
compatible = "samsung,exynos5-sata-ahci";
|
||||
reg = <0x122F0000 0x1ff>;
|
||||
interrupts = <0 115 0>;
|
||||
clocks = <&clock 277>, <&clock 143>;
|
||||
clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
|
||||
clock-names = "sata", "sclk_sata";
|
||||
};
|
||||
|
||||
@ -242,7 +253,7 @@ i2c_0: i2c@12C60000 {
|
||||
interrupts = <0 56 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 294>;
|
||||
clocks = <&clock CLK_I2C0>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_bus>;
|
||||
@ -255,7 +266,7 @@ i2c_1: i2c@12C70000 {
|
||||
interrupts = <0 57 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 295>;
|
||||
clocks = <&clock CLK_I2C1>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_bus>;
|
||||
@ -268,7 +279,7 @@ i2c_2: i2c@12C80000 {
|
||||
interrupts = <0 58 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 296>;
|
||||
clocks = <&clock CLK_I2C2>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_bus>;
|
||||
@ -281,7 +292,7 @@ i2c_3: i2c@12C90000 {
|
||||
interrupts = <0 59 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 297>;
|
||||
clocks = <&clock CLK_I2C3>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3_bus>;
|
||||
@ -294,7 +305,7 @@ i2c_4: i2c@12CA0000 {
|
||||
interrupts = <0 60 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 298>;
|
||||
clocks = <&clock CLK_I2C4>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4_bus>;
|
||||
@ -307,7 +318,7 @@ i2c_5: i2c@12CB0000 {
|
||||
interrupts = <0 61 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 299>;
|
||||
clocks = <&clock CLK_I2C5>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c5_bus>;
|
||||
@ -320,7 +331,7 @@ i2c_6: i2c@12CC0000 {
|
||||
interrupts = <0 62 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 300>;
|
||||
clocks = <&clock CLK_I2C6>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c6_bus>;
|
||||
@ -333,7 +344,7 @@ i2c_7: i2c@12CD0000 {
|
||||
interrupts = <0 63 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 301>;
|
||||
clocks = <&clock CLK_I2C7>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c7_bus>;
|
||||
@ -346,7 +357,7 @@ i2c_8: i2c@12CE0000 {
|
||||
interrupts = <0 64 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 302>;
|
||||
clocks = <&clock CLK_I2C_HDMI>;
|
||||
clock-names = "i2c";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -356,7 +367,7 @@ i2c@121D0000 {
|
||||
reg = <0x121D0000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 288>;
|
||||
clocks = <&clock CLK_SATA_PHYI2C>;
|
||||
clock-names = "i2c";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -371,7 +382,7 @@ spi_0: spi@12d20000 {
|
||||
dma-names = "tx", "rx";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 304>, <&clock 154>;
|
||||
clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
|
||||
clock-names = "spi", "spi_busclk0";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_bus>;
|
||||
@ -387,7 +398,7 @@ spi_1: spi@12d30000 {
|
||||
dma-names = "tx", "rx";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 305>, <&clock 155>;
|
||||
clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
|
||||
clock-names = "spi", "spi_busclk0";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi1_bus>;
|
||||
@ -403,7 +414,7 @@ spi_2: spi@12d40000 {
|
||||
dma-names = "tx", "rx";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 306>, <&clock 156>;
|
||||
clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
|
||||
clock-names = "spi", "spi_busclk0";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2_bus>;
|
||||
@ -415,7 +426,7 @@ mmc_0: mmc@12200000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x12200000 0x1000>;
|
||||
clocks = <&clock 280>, <&clock 139>;
|
||||
clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
|
||||
clock-names = "biu", "ciu";
|
||||
fifo-depth = <0x80>;
|
||||
status = "disabled";
|
||||
@ -427,7 +438,7 @@ mmc_1: mmc@12210000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x12210000 0x1000>;
|
||||
clocks = <&clock 281>, <&clock 140>;
|
||||
clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
|
||||
clock-names = "biu", "ciu";
|
||||
fifo-depth = <0x80>;
|
||||
status = "disabled";
|
||||
@ -439,7 +450,7 @@ mmc_2: mmc@12220000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x12220000 0x1000>;
|
||||
clocks = <&clock 282>, <&clock 141>;
|
||||
clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
|
||||
clock-names = "biu", "ciu";
|
||||
fifo-depth = <0x80>;
|
||||
status = "disabled";
|
||||
@ -451,7 +462,7 @@ mmc_3: mmc@12230000 {
|
||||
interrupts = <0 78 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 283>, <&clock 142>;
|
||||
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
|
||||
clock-names = "biu", "ciu";
|
||||
fifo-depth = <0x80>;
|
||||
status = "disabled";
|
||||
@ -481,7 +492,7 @@ i2s1: i2s@12D60000 {
|
||||
dmas = <&pdma1 12
|
||||
&pdma1 11>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&clock 307>, <&clock 157>;
|
||||
clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
|
||||
clock-names = "iis", "i2s_opclk0";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s1_bus>;
|
||||
@ -494,7 +505,7 @@ i2s2: i2s@12D70000 {
|
||||
dmas = <&pdma0 12
|
||||
&pdma0 11>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&clock 308>, <&clock 158>;
|
||||
clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
|
||||
clock-names = "iis", "i2s_opclk0";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s2_bus>;
|
||||
@ -502,7 +513,7 @@ i2s2: i2s@12D70000 {
|
||||
|
||||
usb@12000000 {
|
||||
compatible = "samsung,exynos5250-dwusb3";
|
||||
clocks = <&clock 286>;
|
||||
clocks = <&clock CLK_USB3>;
|
||||
clock-names = "usbdrd30";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
@ -519,7 +530,7 @@ dwc3 {
|
||||
usb3_phy: usbphy@12100000 {
|
||||
compatible = "samsung,exynos5250-usb3phy";
|
||||
reg = <0x12100000 0x100>;
|
||||
clocks = <&clock 1>, <&clock 286>;
|
||||
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB3>;
|
||||
clock-names = "ext_xtal", "usbdrd30";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
@ -535,7 +546,7 @@ usb@12110000 {
|
||||
reg = <0x12110000 0x100>;
|
||||
interrupts = <0 71 0>;
|
||||
|
||||
clocks = <&clock 285>;
|
||||
clocks = <&clock CLK_USB2>;
|
||||
clock-names = "usbhost";
|
||||
};
|
||||
|
||||
@ -544,14 +555,14 @@ usb@12120000 {
|
||||
reg = <0x12120000 0x100>;
|
||||
interrupts = <0 71 0>;
|
||||
|
||||
clocks = <&clock 285>;
|
||||
clocks = <&clock CLK_USB2>;
|
||||
clock-names = "usbhost";
|
||||
};
|
||||
|
||||
usb2_phy: usbphy@12130000 {
|
||||
compatible = "samsung,exynos5250-usb2phy";
|
||||
reg = <0x12130000 0x100>;
|
||||
clocks = <&clock 1>, <&clock 285>;
|
||||
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB2>;
|
||||
clock-names = "ext_xtal", "usbhost";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
@ -568,7 +579,7 @@ pwm: pwm@12dd0000 {
|
||||
reg = <0x12dd0000 0x100>;
|
||||
samsung,pwm-outputs = <0>, <1>, <2>, <3>;
|
||||
#pwm-cells = <3>;
|
||||
clocks = <&clock 311>;
|
||||
clocks = <&clock CLK_PWM>;
|
||||
clock-names = "timers";
|
||||
};
|
||||
|
||||
@ -583,7 +594,7 @@ pdma0: pdma@121A0000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x121A0000 0x1000>;
|
||||
interrupts = <0 34 0>;
|
||||
clocks = <&clock 275>;
|
||||
clocks = <&clock CLK_PDMA0>;
|
||||
clock-names = "apb_pclk";
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <8>;
|
||||
@ -594,7 +605,7 @@ pdma1: pdma@121B0000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x121B0000 0x1000>;
|
||||
interrupts = <0 35 0>;
|
||||
clocks = <&clock 276>;
|
||||
clocks = <&clock CLK_PDMA1>;
|
||||
clock-names = "apb_pclk";
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <8>;
|
||||
@ -605,7 +616,7 @@ mdma0: mdma@10800000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x10800000 0x1000>;
|
||||
interrupts = <0 33 0>;
|
||||
clocks = <&clock 346>;
|
||||
clocks = <&clock CLK_MDMA0>;
|
||||
clock-names = "apb_pclk";
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <8>;
|
||||
@ -616,7 +627,7 @@ mdma1: mdma@11C10000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x11C10000 0x1000>;
|
||||
interrupts = <0 124 0>;
|
||||
clocks = <&clock 271>;
|
||||
clocks = <&clock CLK_MDMA1>;
|
||||
clock-names = "apb_pclk";
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <8>;
|
||||
@ -629,7 +640,7 @@ gsc_0: gsc@13e00000 {
|
||||
reg = <0x13e00000 0x1000>;
|
||||
interrupts = <0 85 0>;
|
||||
samsung,power-domain = <&pd_gsc>;
|
||||
clocks = <&clock 256>;
|
||||
clocks = <&clock CLK_GSCL0>;
|
||||
clock-names = "gscl";
|
||||
};
|
||||
|
||||
@ -638,7 +649,7 @@ gsc_1: gsc@13e10000 {
|
||||
reg = <0x13e10000 0x1000>;
|
||||
interrupts = <0 86 0>;
|
||||
samsung,power-domain = <&pd_gsc>;
|
||||
clocks = <&clock 257>;
|
||||
clocks = <&clock CLK_GSCL1>;
|
||||
clock-names = "gscl";
|
||||
};
|
||||
|
||||
@ -647,7 +658,7 @@ gsc_2: gsc@13e20000 {
|
||||
reg = <0x13e20000 0x1000>;
|
||||
interrupts = <0 87 0>;
|
||||
samsung,power-domain = <&pd_gsc>;
|
||||
clocks = <&clock 258>;
|
||||
clocks = <&clock CLK_GSCL2>;
|
||||
clock-names = "gscl";
|
||||
};
|
||||
|
||||
@ -656,7 +667,7 @@ gsc_3: gsc@13e30000 {
|
||||
reg = <0x13e30000 0x1000>;
|
||||
interrupts = <0 88 0>;
|
||||
samsung,power-domain = <&pd_gsc>;
|
||||
clocks = <&clock 259>;
|
||||
clocks = <&clock CLK_GSCL3>;
|
||||
clock-names = "gscl";
|
||||
};
|
||||
|
||||
@ -664,8 +675,9 @@ hdmi {
|
||||
compatible = "samsung,exynos4212-hdmi";
|
||||
reg = <0x14530000 0x70000>;
|
||||
interrupts = <0 95 0>;
|
||||
clocks = <&clock 344>, <&clock 136>, <&clock 137>,
|
||||
<&clock 159>, <&clock 1024>;
|
||||
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
|
||||
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
|
||||
<&clock CLK_MOUT_HDMI>;
|
||||
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
|
||||
"sclk_hdmiphy", "mout_hdmi";
|
||||
};
|
||||
@ -674,7 +686,7 @@ mixer {
|
||||
compatible = "samsung,exynos5250-mixer";
|
||||
reg = <0x14450000 0x10000>;
|
||||
interrupts = <0 94 0>;
|
||||
clocks = <&clock 343>, <&clock 136>;
|
||||
clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
|
||||
clock-names = "mixer", "sclk_hdmi";
|
||||
};
|
||||
|
||||
@ -685,14 +697,14 @@ dp_phy: video-phy@10040720 {
|
||||
};
|
||||
|
||||
dp-controller@145B0000 {
|
||||
clocks = <&clock 342>;
|
||||
clocks = <&clock CLK_DP>;
|
||||
clock-names = "dp";
|
||||
phys = <&dp_phy>;
|
||||
phy-names = "dp";
|
||||
};
|
||||
|
||||
fimd@14400000 {
|
||||
clocks = <&clock 133>, <&clock 339>;
|
||||
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
|
||||
clock-names = "sclk_fimd", "fimd";
|
||||
};
|
||||
|
||||
@ -700,7 +712,7 @@ adc: adc@12D10000 {
|
||||
compatible = "samsung,exynos-adc-v1";
|
||||
reg = <0x12D10000 0x100>, <0x10040718 0x4>;
|
||||
interrupts = <0 106 0>;
|
||||
clocks = <&clock 303>;
|
||||
clocks = <&clock CLK_ADC>;
|
||||
clock-names = "adc";
|
||||
#io-channel-cells = <1>;
|
||||
io-channel-ranges;
|
||||
|
||||
@ -11,6 +11,8 @@
|
||||
|
||||
/dts-v1/;
|
||||
#include "exynos5420.dtsi"
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
|
||||
@ -31,6 +33,10 @@ oscclk {
|
||||
};
|
||||
};
|
||||
|
||||
rtc@101E0000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
mmc@12200000 {
|
||||
status = "okay";
|
||||
broken-cd;
|
||||
@ -41,6 +47,7 @@ mmc@12200000 {
|
||||
samsung,dw-mshc-ddr-timing = <0 2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
|
||||
vmmc-supply = <&ldo10_reg>;
|
||||
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
@ -57,10 +64,301 @@ mmc@12220000 {
|
||||
samsung,dw-mshc-ddr-timing = <1 2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
|
||||
vmmc-supply = <&ldo10_reg>;
|
||||
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
hsi2c_4: i2c@12CA0000 {
|
||||
status = "okay";
|
||||
|
||||
s2mps11_pmic@66 {
|
||||
compatible = "samsung,s2mps11-pmic";
|
||||
reg = <0x66>;
|
||||
s2mps11,buck2-ramp-delay = <12>;
|
||||
s2mps11,buck34-ramp-delay = <12>;
|
||||
s2mps11,buck16-ramp-delay = <12>;
|
||||
s2mps11,buck6-ramp-enable = <1>;
|
||||
s2mps11,buck2-ramp-enable = <1>;
|
||||
s2mps11,buck3-ramp-enable = <1>;
|
||||
s2mps11,buck4-ramp-enable = <1>;
|
||||
|
||||
interrupt-parent = <&gpx3>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
s2mps11_osc: clocks {
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "s2mps11_ap",
|
||||
"s2mps11_cp", "s2mps11_bt";
|
||||
};
|
||||
|
||||
regulators {
|
||||
ldo1_reg: LDO1 {
|
||||
regulator-name = "PVDD_ALIVE_1V0";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo2_reg: LDO2 {
|
||||
regulator-name = "PVDD_APIO_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo3_reg: LDO3 {
|
||||
regulator-name = "PVDD_APIO_MMCON_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo4_reg: LDO4 {
|
||||
regulator-name = "PVDD_ADC_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo5_reg: LDO5 {
|
||||
regulator-name = "PVDD_PLL_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo6_reg: LDO6 {
|
||||
regulator-name = "PVDD_ANAIP_1V0";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
};
|
||||
|
||||
ldo7_reg: LDO7 {
|
||||
regulator-name = "PVDD_ANAIP_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo8_reg: LDO8 {
|
||||
regulator-name = "PVDD_ABB_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo9_reg: LDO9 {
|
||||
regulator-name = "PVDD_USB_3V3";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
ldo10_reg: LDO10 {
|
||||
regulator-name = "PVDD_PRE_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo11_reg: LDO11 {
|
||||
regulator-name = "PVDD_USB_1V0";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo12_reg: LDO12 {
|
||||
regulator-name = "PVDD_HSIC_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo13_reg: LDO13 {
|
||||
regulator-name = "PVDD_APIO_MMCOFF_2V8";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
ldo15_reg: LDO15 {
|
||||
regulator-name = "PVDD_PERI_2V8";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo16_reg: LDO16 {
|
||||
regulator-name = "PVDD_PERI_3V3";
|
||||
regulator-min-microvolt = <2200000>;
|
||||
regulator-max-microvolt = <2200000>;
|
||||
};
|
||||
|
||||
ldo18_reg: LDO18 {
|
||||
regulator-name = "PVDD_EMMC_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo19_reg: LDO19 {
|
||||
regulator-name = "PVDD_TFLASH_2V8";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
ldo20_reg: LDO20 {
|
||||
regulator-name = "PVDD_BTWIFI_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo21_reg: LDO21 {
|
||||
regulator-name = "PVDD_CAM1IO_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo23_reg: LDO23 {
|
||||
regulator-name = "PVDD_MIFS_1V1";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
ldo24_reg: LDO24 {
|
||||
regulator-name = "PVDD_CAM1_AVDD_2V8";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
ldo26_reg: LDO26 {
|
||||
regulator-name = "PVDD_CAM0_AF_2V8";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
ldo27_reg: LDO27 {
|
||||
regulator-name = "PVDD_G3DS_1V0";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
ldo28_reg: LDO28 {
|
||||
regulator-name = "PVDD_TSP_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo29_reg: LDO29 {
|
||||
regulator-name = "PVDD_AUDIO_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo31_reg: LDO31 {
|
||||
regulator-name = "PVDD_PERI_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo32_reg: LDO32 {
|
||||
regulator-name = "PVDD_LCD_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo33_reg: LDO33 {
|
||||
regulator-name = "PVDD_CAM0IO_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo35_reg: LDO35 {
|
||||
regulator-name = "PVDD_CAM0_DVDD_1V2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
ldo38_reg: LDO38 {
|
||||
regulator-name = "PVDD_CAM0_AVDD_2V8";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
buck1_reg: BUCK1 {
|
||||
regulator-name = "PVDD_MIF_1V1";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck2_reg: BUCK2 {
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck3_reg: BUCK3 {
|
||||
regulator-name = "PVDD_INT_1V0";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck4_reg: BUCK4 {
|
||||
regulator-name = "PVDD_G3D_1V0";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
};
|
||||
|
||||
buck5_reg: BUCK5 {
|
||||
regulator-name = "PVDD_LPDDR3_1V2";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck6_reg: BUCK6 {
|
||||
regulator-name = "PVDD_KFC_1V0";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck7_reg: BUCK7 {
|
||||
regulator-name = "VIN_LLDO_1V4";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck8_reg: BUCK8 {
|
||||
regulator-name = "VIN_MLDO_2V0";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck9_reg: BUCK9 {
|
||||
regulator-name = "VIN_HLDO_3V5";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3500000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck10_reg: BUCK10 {
|
||||
regulator-name = "PVDD_EMMCF_2V8";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
wakeup {
|
||||
label = "SW-TACT1";
|
||||
gpios = <&gpx2 7 1>;
|
||||
linux,code = <KEY_WAKEUP>;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -31,6 +31,43 @@ oscclk {
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
vdd: fixed-regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <0>;
|
||||
regulator-name = "vdd-supply";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dbvdd: fixed-regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "dbvdd-supply";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
spkvdd: fixed-regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "spkvdd-supply";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
rtc@101E0000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
mmc@12200000 {
|
||||
status = "okay";
|
||||
broken-cd;
|
||||
@ -120,4 +157,220 @@ hdmiddc@50 {
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
hsi2c_4: i2c@12CA0000 {
|
||||
status = "okay";
|
||||
|
||||
s2mps11_pmic@66 {
|
||||
compatible = "samsung,s2mps11-pmic";
|
||||
reg = <0x66>;
|
||||
s2mps11,buck2-ramp-delay = <12>;
|
||||
s2mps11,buck34-ramp-delay = <12>;
|
||||
s2mps11,buck16-ramp-delay = <12>;
|
||||
s2mps11,buck6-ramp-enable = <1>;
|
||||
s2mps11,buck2-ramp-enable = <1>;
|
||||
s2mps11,buck3-ramp-enable = <1>;
|
||||
s2mps11,buck4-ramp-enable = <1>;
|
||||
|
||||
s2mps11_osc: clocks {
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "s2mps11_ap",
|
||||
"s2mps11_cp", "s2mps11_bt";
|
||||
};
|
||||
|
||||
regulators {
|
||||
ldo1_reg: LDO1 {
|
||||
regulator-name = "vdd_ldo1";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo3_reg: LDO3 {
|
||||
regulator-name = "vdd_ldo3";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo5_reg: LDO5 {
|
||||
regulator-name = "vdd_ldo5";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo6_reg: LDO6 {
|
||||
regulator-name = "vdd_ldo6";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo7_reg: LDO7 {
|
||||
regulator-name = "vdd_ldo7";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo8_reg: LDO8 {
|
||||
regulator-name = "vdd_ldo8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo9_reg: LDO9 {
|
||||
regulator-name = "vdd_ldo9";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo10_reg: LDO10 {
|
||||
regulator-name = "vdd_ldo10";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo11_reg: LDO11 {
|
||||
regulator-name = "vdd_ldo11";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo12_reg: LDO12 {
|
||||
regulator-name = "vdd_ldo12";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo13_reg: LDO13 {
|
||||
regulator-name = "vdd_ldo13";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo15_reg: LDO15 {
|
||||
regulator-name = "vdd_ldo15";
|
||||
regulator-min-microvolt = <3100000>;
|
||||
regulator-max-microvolt = <3100000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo16_reg: LDO16 {
|
||||
regulator-name = "vdd_ldo16";
|
||||
regulator-min-microvolt = <2200000>;
|
||||
regulator-max-microvolt = <2200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo17_reg: LDO17 {
|
||||
regulator-name = "tsp_avdd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo19_reg: LDO19 {
|
||||
regulator-name = "vdd_sd";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo24_reg: LDO24 {
|
||||
regulator-name = "tsp_io";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck1_reg: BUCK1 {
|
||||
regulator-name = "vdd_mif";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck2_reg: BUCK2 {
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck3_reg: BUCK3 {
|
||||
regulator-name = "vdd_int";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck4_reg: BUCK4 {
|
||||
regulator-name = "vdd_g3d";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck5_reg: BUCK5 {
|
||||
regulator-name = "vdd_mem";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck6_reg: BUCK6 {
|
||||
regulator-name = "vdd_kfc";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck7_reg: BUCK7 {
|
||||
regulator-name = "vdd_1.0v_ldo";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck8_reg: BUCK8 {
|
||||
regulator-name = "vdd_1.8v_ldo";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck9_reg: BUCK9 {
|
||||
regulator-name = "vdd_2.8v_ldo";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3750000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck10_reg: BUCK10 {
|
||||
regulator-name = "vdd_vmem";
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -13,6 +13,7 @@
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/clock/exynos5420.h>
|
||||
#include "exynos5.dtsi"
|
||||
#include "exynos5420-pinctrl.dtsi"
|
||||
|
||||
@ -119,7 +120,8 @@ clock_audss: audss-clock-controller@3810000 {
|
||||
compatible = "samsung,exynos5420-audss-clock";
|
||||
reg = <0x03810000 0x0C>;
|
||||
#clock-cells = <1>;
|
||||
clocks = <&clock 1>, <&clock 5>, <&clock 148>, <&clock 149>;
|
||||
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
|
||||
<&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
|
||||
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
|
||||
};
|
||||
|
||||
@ -127,7 +129,7 @@ codec@11000000 {
|
||||
compatible = "samsung,mfc-v7";
|
||||
reg = <0x11000000 0x10000>;
|
||||
interrupts = <0 96 0>;
|
||||
clocks = <&clock 401>;
|
||||
clocks = <&clock CLK_MFC>;
|
||||
clock-names = "mfc";
|
||||
};
|
||||
|
||||
@ -137,7 +139,7 @@ mmc_0: mmc@12200000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x12200000 0x2000>;
|
||||
clocks = <&clock 351>, <&clock 132>;
|
||||
clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
|
||||
clock-names = "biu", "ciu";
|
||||
fifo-depth = <0x40>;
|
||||
status = "disabled";
|
||||
@ -149,7 +151,7 @@ mmc_1: mmc@12210000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x12210000 0x2000>;
|
||||
clocks = <&clock 352>, <&clock 133>;
|
||||
clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
|
||||
clock-names = "biu", "ciu";
|
||||
fifo-depth = <0x40>;
|
||||
status = "disabled";
|
||||
@ -161,7 +163,7 @@ mmc_2: mmc@12220000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x12220000 0x1000>;
|
||||
clocks = <&clock 353>, <&clock 134>;
|
||||
clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
|
||||
clock-names = "biu", "ciu";
|
||||
fifo-depth = <0x40>;
|
||||
status = "disabled";
|
||||
@ -175,7 +177,7 @@ mct@101C0000 {
|
||||
interrupt-parent = <&mct_map>;
|
||||
interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
|
||||
<8>, <9>, <10>, <11>;
|
||||
clocks = <&clock 1>, <&clock 315>;
|
||||
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
|
||||
clock-names = "fin_pll", "mct";
|
||||
|
||||
mct_map: mct-map {
|
||||
@ -269,9 +271,9 @@ pinctrl_4: pinctrl@03860000 {
|
||||
};
|
||||
|
||||
rtc@101E0000 {
|
||||
clocks = <&clock 317>;
|
||||
clocks = <&clock CLK_RTC>;
|
||||
clock-names = "rtc";
|
||||
status = "okay";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
amba {
|
||||
@ -281,11 +283,22 @@ amba {
|
||||
interrupt-parent = <&gic>;
|
||||
ranges;
|
||||
|
||||
adma: adma@03880000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x03880000 0x1000>;
|
||||
interrupts = <0 110 0>;
|
||||
clocks = <&clock_audss EXYNOS_ADMA>;
|
||||
clock-names = "apb_pclk";
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <6>;
|
||||
#dma-requests = <16>;
|
||||
};
|
||||
|
||||
pdma0: pdma@121A0000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x121A0000 0x1000>;
|
||||
interrupts = <0 34 0>;
|
||||
clocks = <&clock 362>;
|
||||
clocks = <&clock CLK_PDMA0>;
|
||||
clock-names = "apb_pclk";
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <8>;
|
||||
@ -296,7 +309,7 @@ pdma1: pdma@121B0000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x121B0000 0x1000>;
|
||||
interrupts = <0 35 0>;
|
||||
clocks = <&clock 363>;
|
||||
clocks = <&clock CLK_PDMA1>;
|
||||
clock-names = "apb_pclk";
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <8>;
|
||||
@ -307,7 +320,7 @@ mdma0: mdma@10800000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x10800000 0x1000>;
|
||||
interrupts = <0 33 0>;
|
||||
clocks = <&clock 473>;
|
||||
clocks = <&clock CLK_MDMA0>;
|
||||
clock-names = "apb_pclk";
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <8>;
|
||||
@ -318,7 +331,7 @@ mdma1: mdma@11C10000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x11C10000 0x1000>;
|
||||
interrupts = <0 124 0>;
|
||||
clocks = <&clock 442>;
|
||||
clocks = <&clock CLK_MDMA1>;
|
||||
clock-names = "apb_pclk";
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <8>;
|
||||
@ -326,6 +339,49 @@ mdma1: mdma@11C10000 {
|
||||
};
|
||||
};
|
||||
|
||||
i2s0: i2s@03830000 {
|
||||
compatible = "samsung,exynos5420-i2s";
|
||||
reg = <0x03830000 0x100>;
|
||||
dmas = <&adma 0
|
||||
&adma 2
|
||||
&adma 1>;
|
||||
dma-names = "tx", "rx", "tx-sec";
|
||||
clocks = <&clock_audss EXYNOS_I2S_BUS>,
|
||||
<&clock_audss EXYNOS_I2S_BUS>,
|
||||
<&clock_audss EXYNOS_SCLK_I2S>;
|
||||
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
|
||||
samsung,idma-addr = <0x03000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s0_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2s1: i2s@12D60000 {
|
||||
compatible = "samsung,exynos5420-i2s";
|
||||
reg = <0x12D60000 0x100>;
|
||||
dmas = <&pdma1 12
|
||||
&pdma1 11>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
|
||||
clock-names = "iis", "i2s_opclk0";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s1_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2s2: i2s@12D70000 {
|
||||
compatible = "samsung,exynos5420-i2s";
|
||||
reg = <0x12D70000 0x100>;
|
||||
dmas = <&pdma0 12
|
||||
&pdma0 11>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
|
||||
clock-names = "iis", "i2s_opclk0";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s2_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi_0: spi@12d20000 {
|
||||
compatible = "samsung,exynos4210-spi";
|
||||
reg = <0x12d20000 0x100>;
|
||||
@ -337,7 +393,7 @@ spi_0: spi@12d20000 {
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_bus>;
|
||||
clocks = <&clock 271>, <&clock 135>;
|
||||
clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
|
||||
clock-names = "spi", "spi_busclk0";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -353,7 +409,7 @@ spi_1: spi@12d30000 {
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi1_bus>;
|
||||
clocks = <&clock 272>, <&clock 136>;
|
||||
clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
|
||||
clock-names = "spi", "spi_busclk0";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -369,28 +425,28 @@ spi_2: spi@12d40000 {
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2_bus>;
|
||||
clocks = <&clock 273>, <&clock 137>;
|
||||
clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
|
||||
clock-names = "spi", "spi_busclk0";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@12C00000 {
|
||||
clocks = <&clock 257>, <&clock 128>;
|
||||
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
||||
serial@12C10000 {
|
||||
clocks = <&clock 258>, <&clock 129>;
|
||||
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
||||
serial@12C20000 {
|
||||
clocks = <&clock 259>, <&clock 130>;
|
||||
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
||||
serial@12C30000 {
|
||||
clocks = <&clock 260>, <&clock 131>;
|
||||
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
||||
@ -399,7 +455,7 @@ pwm: pwm@12dd0000 {
|
||||
reg = <0x12dd0000 0x100>;
|
||||
samsung,pwm-outputs = <0>, <1>, <2>, <3>;
|
||||
#pwm-cells = <3>;
|
||||
clocks = <&clock 279>;
|
||||
clocks = <&clock CLK_PWM>;
|
||||
clock-names = "timers";
|
||||
};
|
||||
|
||||
@ -410,7 +466,7 @@ dp_phy: video-phy@10040728 {
|
||||
};
|
||||
|
||||
dp-controller@145B0000 {
|
||||
clocks = <&clock 412>;
|
||||
clocks = <&clock CLK_DP1>;
|
||||
clock-names = "dp";
|
||||
phys = <&dp_phy>;
|
||||
phy-names = "dp";
|
||||
@ -418,7 +474,7 @@ dp-controller@145B0000 {
|
||||
|
||||
fimd@14400000 {
|
||||
samsung,power-domain = <&disp_pd>;
|
||||
clocks = <&clock 147>, <&clock 421>;
|
||||
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
|
||||
clock-names = "sclk_fimd", "fimd";
|
||||
};
|
||||
|
||||
@ -426,7 +482,7 @@ adc: adc@12D10000 {
|
||||
compatible = "samsung,exynos-adc-v2";
|
||||
reg = <0x12D10000 0x100>, <0x10040720 0x4>;
|
||||
interrupts = <0 106 0>;
|
||||
clocks = <&clock 270>;
|
||||
clocks = <&clock CLK_TSADC>;
|
||||
clock-names = "adc";
|
||||
#io-channel-cells = <1>;
|
||||
io-channel-ranges;
|
||||
@ -439,7 +495,7 @@ i2c_0: i2c@12C60000 {
|
||||
interrupts = <0 56 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 261>;
|
||||
clocks = <&clock CLK_I2C0>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_bus>;
|
||||
@ -452,7 +508,7 @@ i2c_1: i2c@12C70000 {
|
||||
interrupts = <0 57 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 262>;
|
||||
clocks = <&clock CLK_I2C1>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_bus>;
|
||||
@ -465,7 +521,7 @@ i2c_2: i2c@12C80000 {
|
||||
interrupts = <0 58 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 263>;
|
||||
clocks = <&clock CLK_I2C2>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_bus>;
|
||||
@ -478,7 +534,7 @@ i2c_3: i2c@12C90000 {
|
||||
interrupts = <0 59 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 264>;
|
||||
clocks = <&clock CLK_I2C3>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3_bus>;
|
||||
@ -493,7 +549,7 @@ hsi2c_4: i2c@12CA0000 {
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4_hs_bus>;
|
||||
clocks = <&clock 265>;
|
||||
clocks = <&clock CLK_I2C4>;
|
||||
clock-names = "hsi2c";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -506,7 +562,7 @@ hsi2c_5: i2c@12CB0000 {
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c5_hs_bus>;
|
||||
clocks = <&clock 266>;
|
||||
clocks = <&clock CLK_I2C5>;
|
||||
clock-names = "hsi2c";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -519,7 +575,7 @@ hsi2c_6: i2c@12CC0000 {
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c6_hs_bus>;
|
||||
clocks = <&clock 267>;
|
||||
clocks = <&clock CLK_I2C6>;
|
||||
clock-names = "hsi2c";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -532,7 +588,7 @@ hsi2c_7: i2c@12CD0000 {
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c7_hs_bus>;
|
||||
clocks = <&clock 268>;
|
||||
clocks = <&clock CLK_I2C7>;
|
||||
clock-names = "hsi2c";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -545,7 +601,7 @@ hsi2c_8: i2c@12E00000 {
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c8_hs_bus>;
|
||||
clocks = <&clock 281>;
|
||||
clocks = <&clock CLK_I2C8>;
|
||||
clock-names = "hsi2c";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -558,7 +614,7 @@ hsi2c_9: i2c@12E10000 {
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c9_hs_bus>;
|
||||
clocks = <&clock 282>;
|
||||
clocks = <&clock CLK_I2C9>;
|
||||
clock-names = "hsi2c";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -571,7 +627,7 @@ hsi2c_10: i2c@12E20000 {
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c10_hs_bus>;
|
||||
clocks = <&clock 283>;
|
||||
clocks = <&clock CLK_I2C10>;
|
||||
clock-names = "hsi2c";
|
||||
status = "disabled";
|
||||
};
|
||||
@ -580,8 +636,9 @@ hdmi@14530000 {
|
||||
compatible = "samsung,exynos4212-hdmi";
|
||||
reg = <0x14530000 0x70000>;
|
||||
interrupts = <0 95 0>;
|
||||
clocks = <&clock 413>, <&clock 143>, <&clock 768>,
|
||||
<&clock 158>, <&clock 640>;
|
||||
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
|
||||
<&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
|
||||
<&clock CLK_MOUT_HDMI>;
|
||||
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
|
||||
"sclk_hdmiphy", "mout_hdmi";
|
||||
status = "disabled";
|
||||
@ -591,7 +648,7 @@ mixer@14450000 {
|
||||
compatible = "samsung,exynos5420-mixer";
|
||||
reg = <0x14450000 0x10000>;
|
||||
interrupts = <0 94 0>;
|
||||
clocks = <&clock 431>, <&clock 143>;
|
||||
clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
|
||||
clock-names = "mixer", "sclk_hdmi";
|
||||
};
|
||||
|
||||
@ -599,7 +656,7 @@ gsc_0: video-scaler@13e00000 {
|
||||
compatible = "samsung,exynos5-gsc";
|
||||
reg = <0x13e00000 0x1000>;
|
||||
interrupts = <0 85 0>;
|
||||
clocks = <&clock 465>;
|
||||
clocks = <&clock CLK_GSCL0>;
|
||||
clock-names = "gscl";
|
||||
samsung,power-domain = <&gsc_pd>;
|
||||
};
|
||||
@ -608,16 +665,21 @@ gsc_1: video-scaler@13e10000 {
|
||||
compatible = "samsung,exynos5-gsc";
|
||||
reg = <0x13e10000 0x1000>;
|
||||
interrupts = <0 86 0>;
|
||||
clocks = <&clock 466>;
|
||||
clocks = <&clock CLK_GSCL1>;
|
||||
clock-names = "gscl";
|
||||
samsung,power-domain = <&gsc_pd>;
|
||||
};
|
||||
|
||||
pmu_system_controller: system-controller@10040000 {
|
||||
compatible = "samsung,exynos5420-pmu", "syscon";
|
||||
reg = <0x10040000 0x5000>;
|
||||
};
|
||||
|
||||
tmu_cpu0: tmu@10060000 {
|
||||
compatible = "samsung,exynos5420-tmu";
|
||||
reg = <0x10060000 0x100>;
|
||||
interrupts = <0 65 0>;
|
||||
clocks = <&clock 318>;
|
||||
clocks = <&clock CLK_TMU>;
|
||||
clock-names = "tmu_apbif";
|
||||
};
|
||||
|
||||
@ -625,7 +687,7 @@ tmu_cpu1: tmu@10064000 {
|
||||
compatible = "samsung,exynos5420-tmu";
|
||||
reg = <0x10064000 0x100>;
|
||||
interrupts = <0 183 0>;
|
||||
clocks = <&clock 318>;
|
||||
clocks = <&clock CLK_TMU>;
|
||||
clock-names = "tmu_apbif";
|
||||
};
|
||||
|
||||
@ -633,7 +695,7 @@ tmu_cpu2: tmu@10068000 {
|
||||
compatible = "samsung,exynos5420-tmu-ext-triminfo";
|
||||
reg = <0x10068000 0x100>, <0x1006c000 0x4>;
|
||||
interrupts = <0 184 0>;
|
||||
clocks = <&clock 318>, <&clock 318>;
|
||||
clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
|
||||
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
|
||||
};
|
||||
|
||||
@ -641,7 +703,7 @@ tmu_cpu3: tmu@1006c000 {
|
||||
compatible = "samsung,exynos5420-tmu-ext-triminfo";
|
||||
reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
|
||||
interrupts = <0 185 0>;
|
||||
clocks = <&clock 318>, <&clock 319>;
|
||||
clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
|
||||
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
|
||||
};
|
||||
|
||||
@ -649,7 +711,16 @@ tmu_gpu: tmu@100a0000 {
|
||||
compatible = "samsung,exynos5420-tmu-ext-triminfo";
|
||||
reg = <0x100a0000 0x100>, <0x10068000 0x4>;
|
||||
interrupts = <0 215 0>;
|
||||
clocks = <&clock 319>, <&clock 318>;
|
||||
clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
|
||||
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
|
||||
};
|
||||
|
||||
watchdog@101D0000 {
|
||||
compatible = "samsung,exynos5420-wdt";
|
||||
reg = <0x101D0000 0x100>;
|
||||
interrupts = <0 42 0>;
|
||||
clocks = <&clock CLK_WDT>;
|
||||
clock-names = "watchdog";
|
||||
samsung,syscon-phandle = <&pmu_system_controller>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -9,6 +9,7 @@
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/clock/exynos5440.h>
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
@ -105,7 +106,7 @@ serial@B0000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0xB0000 0x1000>;
|
||||
interrupts = <0 2 0>;
|
||||
clocks = <&clock 21>, <&clock 21>;
|
||||
clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
||||
@ -113,7 +114,7 @@ serial@C0000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0xC0000 0x1000>;
|
||||
interrupts = <0 3 0>;
|
||||
clocks = <&clock 21>, <&clock 21>;
|
||||
clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
||||
@ -125,7 +126,7 @@ spi_0: spi@D0000 {
|
||||
#size-cells = <0>;
|
||||
samsung,spi-src-clk = <0>;
|
||||
num-cs = <1>;
|
||||
clocks = <&clock 21>, <&clock 16>;
|
||||
clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>;
|
||||
clock-names = "spi", "spi_busclk0";
|
||||
};
|
||||
|
||||
@ -161,7 +162,7 @@ i2c@F0000 {
|
||||
interrupts = <0 5 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 21>;
|
||||
clocks = <&clock CLK_B_125>;
|
||||
clock-names = "i2c";
|
||||
};
|
||||
|
||||
@ -171,7 +172,7 @@ i2c@100000 {
|
||||
interrupts = <0 6 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 21>;
|
||||
clocks = <&clock CLK_B_125>;
|
||||
clock-names = "i2c";
|
||||
};
|
||||
|
||||
@ -179,7 +180,7 @@ watchdog {
|
||||
compatible = "samsung,s3c2410-wdt";
|
||||
reg = <0x110000 0x1000>;
|
||||
interrupts = <0 1 0>;
|
||||
clocks = <&clock 21>;
|
||||
clocks = <&clock CLK_B_125>;
|
||||
clock-names = "watchdog";
|
||||
};
|
||||
|
||||
@ -190,7 +191,7 @@ gmac: ethernet@00230000 {
|
||||
interrupts = <0 31 4>;
|
||||
interrupt-names = "macirq";
|
||||
phy-mode = "sgmii";
|
||||
clocks = <&clock 25>;
|
||||
clocks = <&clock CLK_GMAC0>;
|
||||
clock-names = "stmmaceth";
|
||||
};
|
||||
|
||||
@ -206,7 +207,7 @@ rtc {
|
||||
compatible = "samsung,s3c6410-rtc";
|
||||
reg = <0x130000 0x1000>;
|
||||
interrupts = <0 17 0>, <0 16 0>;
|
||||
clocks = <&clock 21>;
|
||||
clocks = <&clock CLK_B_125>;
|
||||
clock-names = "rtc";
|
||||
};
|
||||
|
||||
@ -214,7 +215,7 @@ tmuctrl_0: tmuctrl@160118 {
|
||||
compatible = "samsung,exynos5440-tmu";
|
||||
reg = <0x160118 0x230>, <0x160368 0x10>;
|
||||
interrupts = <0 58 0>;
|
||||
clocks = <&clock 21>;
|
||||
clocks = <&clock CLK_B_125>;
|
||||
clock-names = "tmu_apbif";
|
||||
};
|
||||
|
||||
@ -222,7 +223,7 @@ tmuctrl_1: tmuctrl@16011C {
|
||||
compatible = "samsung,exynos5440-tmu";
|
||||
reg = <0x16011C 0x230>, <0x160368 0x10>;
|
||||
interrupts = <0 58 0>;
|
||||
clocks = <&clock 21>;
|
||||
clocks = <&clock CLK_B_125>;
|
||||
clock-names = "tmu_apbif";
|
||||
};
|
||||
|
||||
@ -230,7 +231,7 @@ tmuctrl_2: tmuctrl@160120 {
|
||||
compatible = "samsung,exynos5440-tmu";
|
||||
reg = <0x160120 0x230>, <0x160368 0x10>;
|
||||
interrupts = <0 58 0>;
|
||||
clocks = <&clock 21>;
|
||||
clocks = <&clock CLK_B_125>;
|
||||
clock-names = "tmu_apbif";
|
||||
};
|
||||
|
||||
@ -238,7 +239,7 @@ sata@210000 {
|
||||
compatible = "snps,exynos5440-ahci";
|
||||
reg = <0x210000 0x10000>;
|
||||
interrupts = <0 30 0>;
|
||||
clocks = <&clock 23>;
|
||||
clocks = <&clock CLK_SATA>;
|
||||
clock-names = "sata";
|
||||
};
|
||||
|
||||
@ -246,7 +247,7 @@ ohci@220000 {
|
||||
compatible = "samsung,exynos5440-ohci";
|
||||
reg = <0x220000 0x1000>;
|
||||
interrupts = <0 29 0>;
|
||||
clocks = <&clock 24>;
|
||||
clocks = <&clock CLK_USB>;
|
||||
clock-names = "usbhost";
|
||||
};
|
||||
|
||||
@ -254,7 +255,7 @@ ehci@221000 {
|
||||
compatible = "samsung,exynos5440-ehci";
|
||||
reg = <0x221000 0x1000>;
|
||||
interrupts = <0 29 0>;
|
||||
clocks = <&clock 24>;
|
||||
clocks = <&clock CLK_USB>;
|
||||
clock-names = "usbhost";
|
||||
};
|
||||
|
||||
@ -264,7 +265,7 @@ pcie@290000 {
|
||||
0x270000 0x1000
|
||||
0x271000 0x40>;
|
||||
interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
|
||||
clocks = <&clock 28>, <&clock 27>;
|
||||
clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
|
||||
clock-names = "pcie", "pcie_bus";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
@ -285,7 +286,7 @@ pcie@2a0000 {
|
||||
0x272000 0x1000
|
||||
0x271040 0x40>;
|
||||
interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
|
||||
clocks = <&clock 29>, <&clock 27>;
|
||||
clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
|
||||
clock-names = "pcie", "pcie_bus";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
|
||||
@ -9,7 +9,7 @@
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
|
||||
/* The S5PV210/S5PC110 implementations are as belows. */
|
||||
|
||||
|
||||
@ -20,6 +20,7 @@
|
||||
#include <clocksource/samsung_pwm.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_fdt.h>
|
||||
#include <linux/of_irq.h>
|
||||
@ -40,7 +41,6 @@
|
||||
|
||||
#include <plat/cpu.h>
|
||||
#include <plat/pm.h>
|
||||
#include <plat/regs-serial.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "regs-pmu.h"
|
||||
|
||||
@ -1,48 +0,0 @@
|
||||
/*
|
||||
* Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
|
||||
* http://www.samsung.com
|
||||
*
|
||||
* EXYNOS - uncompress code
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_UNCOMPRESS_H
|
||||
#define __ASM_ARCH_UNCOMPRESS_H __FILE__
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <mach/map.h>
|
||||
#include <plat/uncompress.h>
|
||||
|
||||
static unsigned int __raw_readl(unsigned int ptr)
|
||||
{
|
||||
return *((volatile unsigned int *)ptr);
|
||||
}
|
||||
|
||||
static void arch_detect_cpu(void)
|
||||
{
|
||||
u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID);
|
||||
|
||||
/*
|
||||
* product_id is bits 31:12
|
||||
* bits 23:20 describe the exynosX family
|
||||
* bits 27:24 describe the exynosX family in exynos5420
|
||||
*/
|
||||
chip_id >>= 20;
|
||||
|
||||
if ((chip_id & 0x0f) == 0x5 || (chip_id & 0xf0) == 0x50)
|
||||
uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
|
||||
else
|
||||
uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
|
||||
|
||||
/*
|
||||
* For preventing FIFO overrun or infinite loop of UART console,
|
||||
* fifo_max should be the minimum fifo size of all of the UART channels
|
||||
*/
|
||||
fifo_mask = S5PV210_UFSTAT_TXMASK;
|
||||
fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT;
|
||||
}
|
||||
#endif /* __ASM_ARCH_UNCOMPRESS_H */
|
||||
@ -35,56 +35,6 @@
|
||||
#include "common.h"
|
||||
#include "regs-pmu.h"
|
||||
|
||||
#define EXYNOS4_EPLL_LOCK (S5P_VA_CMU + 0x0C010)
|
||||
#define EXYNOS4_VPLL_LOCK (S5P_VA_CMU + 0x0C020)
|
||||
|
||||
#define EXYNOS4_EPLL_CON0 (S5P_VA_CMU + 0x0C110)
|
||||
#define EXYNOS4_EPLL_CON1 (S5P_VA_CMU + 0x0C114)
|
||||
#define EXYNOS4_VPLL_CON0 (S5P_VA_CMU + 0x0C120)
|
||||
#define EXYNOS4_VPLL_CON1 (S5P_VA_CMU + 0x0C124)
|
||||
|
||||
#define EXYNOS4_CLKSRC_MASK_TOP (S5P_VA_CMU + 0x0C310)
|
||||
#define EXYNOS4_CLKSRC_MASK_CAM (S5P_VA_CMU + 0x0C320)
|
||||
#define EXYNOS4_CLKSRC_MASK_TV (S5P_VA_CMU + 0x0C324)
|
||||
#define EXYNOS4_CLKSRC_MASK_LCD0 (S5P_VA_CMU + 0x0C334)
|
||||
#define EXYNOS4_CLKSRC_MASK_MAUDIO (S5P_VA_CMU + 0x0C33C)
|
||||
#define EXYNOS4_CLKSRC_MASK_FSYS (S5P_VA_CMU + 0x0C340)
|
||||
#define EXYNOS4_CLKSRC_MASK_PERIL0 (S5P_VA_CMU + 0x0C350)
|
||||
#define EXYNOS4_CLKSRC_MASK_PERIL1 (S5P_VA_CMU + 0x0C354)
|
||||
|
||||
#define EXYNOS4_CLKSRC_MASK_DMC (S5P_VA_CMU + 0x10300)
|
||||
|
||||
#define EXYNOS4_EPLLCON0_LOCKED_SHIFT (29)
|
||||
#define EXYNOS4_VPLLCON0_LOCKED_SHIFT (29)
|
||||
|
||||
#define EXYNOS4210_CLKSRC_MASK_LCD1 (S5P_VA_CMU + 0x0C338)
|
||||
|
||||
static const struct sleep_save exynos4_set_clksrc[] = {
|
||||
{ .reg = EXYNOS4_CLKSRC_MASK_TOP , .val = 0x00000001, },
|
||||
{ .reg = EXYNOS4_CLKSRC_MASK_CAM , .val = 0x11111111, },
|
||||
{ .reg = EXYNOS4_CLKSRC_MASK_TV , .val = 0x00000111, },
|
||||
{ .reg = EXYNOS4_CLKSRC_MASK_LCD0 , .val = 0x00001111, },
|
||||
{ .reg = EXYNOS4_CLKSRC_MASK_MAUDIO , .val = 0x00000001, },
|
||||
{ .reg = EXYNOS4_CLKSRC_MASK_FSYS , .val = 0x01011111, },
|
||||
{ .reg = EXYNOS4_CLKSRC_MASK_PERIL0 , .val = 0x01111111, },
|
||||
{ .reg = EXYNOS4_CLKSRC_MASK_PERIL1 , .val = 0x01110111, },
|
||||
{ .reg = EXYNOS4_CLKSRC_MASK_DMC , .val = 0x00010000, },
|
||||
};
|
||||
|
||||
static const struct sleep_save exynos4210_set_clksrc[] = {
|
||||
{ .reg = EXYNOS4210_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
|
||||
};
|
||||
|
||||
static struct sleep_save exynos4_epll_save[] = {
|
||||
SAVE_ITEM(EXYNOS4_EPLL_CON0),
|
||||
SAVE_ITEM(EXYNOS4_EPLL_CON1),
|
||||
};
|
||||
|
||||
static struct sleep_save exynos4_vpll_save[] = {
|
||||
SAVE_ITEM(EXYNOS4_VPLL_CON0),
|
||||
SAVE_ITEM(EXYNOS4_VPLL_CON1),
|
||||
};
|
||||
|
||||
static struct sleep_save exynos5_sys_save[] = {
|
||||
SAVE_ITEM(EXYNOS5_SYS_I2C_CFG),
|
||||
};
|
||||
@ -124,10 +74,7 @@ static void exynos_pm_prepare(void)
|
||||
|
||||
s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
|
||||
|
||||
if (!soc_is_exynos5250()) {
|
||||
s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save));
|
||||
s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save));
|
||||
} else {
|
||||
if (soc_is_exynos5250()) {
|
||||
s3c_pm_do_save(exynos5_sys_save, ARRAY_SIZE(exynos5_sys_save));
|
||||
/* Disable USE_RETENTION of JPEG_MEM_OPTION */
|
||||
tmp = __raw_readl(EXYNOS5_JPEG_MEM_OPTION);
|
||||
@ -143,15 +90,6 @@ static void exynos_pm_prepare(void)
|
||||
/* ensure at least INFORM0 has the resume address */
|
||||
|
||||
__raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0);
|
||||
|
||||
/* Before enter central sequence mode, clock src register have to set */
|
||||
|
||||
if (!soc_is_exynos5250())
|
||||
s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
|
||||
|
||||
if (soc_is_exynos4210())
|
||||
s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
|
||||
|
||||
}
|
||||
|
||||
static int exynos_pm_add(struct device *dev, struct subsys_interface *sif)
|
||||
@ -162,73 +100,6 @@ static int exynos_pm_add(struct device *dev, struct subsys_interface *sif)
|
||||
return 0;
|
||||
}
|
||||
|
||||
static unsigned long pll_base_rate;
|
||||
|
||||
static void exynos4_restore_pll(void)
|
||||
{
|
||||
unsigned long pll_con, locktime, lockcnt;
|
||||
unsigned long pll_in_rate;
|
||||
unsigned int p_div, epll_wait = 0, vpll_wait = 0;
|
||||
|
||||
if (pll_base_rate == 0)
|
||||
return;
|
||||
|
||||
pll_in_rate = pll_base_rate;
|
||||
|
||||
/* EPLL */
|
||||
pll_con = exynos4_epll_save[0].val;
|
||||
|
||||
if (pll_con & (1 << 31)) {
|
||||
pll_con &= (PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT);
|
||||
p_div = (pll_con >> PLL46XX_PDIV_SHIFT);
|
||||
|
||||
pll_in_rate /= 1000000;
|
||||
|
||||
locktime = (3000 / pll_in_rate) * p_div;
|
||||
lockcnt = locktime * 10000 / (10000 / pll_in_rate);
|
||||
|
||||
__raw_writel(lockcnt, EXYNOS4_EPLL_LOCK);
|
||||
|
||||
s3c_pm_do_restore_core(exynos4_epll_save,
|
||||
ARRAY_SIZE(exynos4_epll_save));
|
||||
epll_wait = 1;
|
||||
}
|
||||
|
||||
pll_in_rate = pll_base_rate;
|
||||
|
||||
/* VPLL */
|
||||
pll_con = exynos4_vpll_save[0].val;
|
||||
|
||||
if (pll_con & (1 << 31)) {
|
||||
pll_in_rate /= 1000000;
|
||||
/* 750us */
|
||||
locktime = 750;
|
||||
lockcnt = locktime * 10000 / (10000 / pll_in_rate);
|
||||
|
||||
__raw_writel(lockcnt, EXYNOS4_VPLL_LOCK);
|
||||
|
||||
s3c_pm_do_restore_core(exynos4_vpll_save,
|
||||
ARRAY_SIZE(exynos4_vpll_save));
|
||||
vpll_wait = 1;
|
||||
}
|
||||
|
||||
/* Wait PLL locking */
|
||||
|
||||
do {
|
||||
if (epll_wait) {
|
||||
pll_con = __raw_readl(EXYNOS4_EPLL_CON0);
|
||||
if (pll_con & (1 << EXYNOS4_EPLLCON0_LOCKED_SHIFT))
|
||||
epll_wait = 0;
|
||||
}
|
||||
|
||||
if (vpll_wait) {
|
||||
pll_con = __raw_readl(EXYNOS4_VPLL_CON0);
|
||||
if (pll_con & (1 << EXYNOS4_VPLLCON0_LOCKED_SHIFT))
|
||||
vpll_wait = 0;
|
||||
}
|
||||
} while (epll_wait || vpll_wait);
|
||||
}
|
||||
|
||||
static struct subsys_interface exynos_pm_interface = {
|
||||
.name = "exynos_pm",
|
||||
.subsys = &exynos_subsys,
|
||||
@ -237,7 +108,6 @@ static struct subsys_interface exynos_pm_interface = {
|
||||
|
||||
static __init int exynos_pm_drvinit(void)
|
||||
{
|
||||
struct clk *pll_base;
|
||||
unsigned int tmp;
|
||||
|
||||
if (soc_is_exynos5440())
|
||||
@ -251,15 +121,6 @@ static __init int exynos_pm_drvinit(void)
|
||||
tmp |= ((0xFF << 8) | (0x1F << 1));
|
||||
__raw_writel(tmp, S5P_WAKEUP_MASK);
|
||||
|
||||
if (!soc_is_exynos5250()) {
|
||||
pll_base = clk_get(NULL, "xtal");
|
||||
|
||||
if (!IS_ERR(pll_base)) {
|
||||
pll_base_rate = clk_get_rate(pll_base);
|
||||
clk_put(pll_base);
|
||||
}
|
||||
}
|
||||
|
||||
return subsys_interface_register(&exynos_pm_interface);
|
||||
}
|
||||
arch_initcall(exynos_pm_drvinit);
|
||||
@ -343,13 +204,8 @@ static void exynos_pm_resume(void)
|
||||
|
||||
s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
|
||||
|
||||
if (!soc_is_exynos5250()) {
|
||||
exynos4_restore_pll();
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
if (IS_ENABLED(CONFIG_SMP) && !soc_is_exynos5250())
|
||||
scu_enable(S5P_VA_SCU);
|
||||
#endif
|
||||
}
|
||||
|
||||
early_wakeup:
|
||||
|
||||
|
||||
@ -22,8 +22,6 @@
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/sched.h>
|
||||
|
||||
#include <plat/devs.h>
|
||||
|
||||
#include "regs-pmu.h"
|
||||
|
||||
/*
|
||||
|
||||
@ -521,7 +521,6 @@ config MACH_ANUBIS
|
||||
select HAVE_PATA_PLATFORM
|
||||
select S3C2440_XTAL_12000000
|
||||
select S3C24XX_DCLK
|
||||
select S3C24XX_GPIO_EXTRA64
|
||||
select S3C24XX_SIMTEC_PM if PM
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
@ -562,7 +561,6 @@ config MACH_OSIRIS
|
||||
select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
|
||||
select S3C2440_XTAL_12000000
|
||||
select S3C24XX_DCLK
|
||||
select S3C24XX_GPIO_EXTRA128
|
||||
select S3C24XX_SIMTEC_PM if PM
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
|
||||
@ -30,13 +30,12 @@
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-clock.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
|
||||
|
||||
@ -31,13 +31,12 @@
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-clock.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
|
||||
|
||||
@ -34,6 +34,7 @@
|
||||
#include <linux/clk.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <linux/atomic.h>
|
||||
@ -43,7 +44,6 @@
|
||||
|
||||
#include <plat/clock.h>
|
||||
#include <plat/cpu.h>
|
||||
#include <plat/regs-serial.h>
|
||||
|
||||
/* S3C2440 extended clock support */
|
||||
|
||||
|
||||
@ -27,6 +27,7 @@
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <clocksource/samsung_pwm.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/delay.h>
|
||||
@ -44,7 +45,6 @@
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/dma.h>
|
||||
|
||||
#include <plat/cpu.h>
|
||||
@ -240,7 +240,6 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
|
||||
} else {
|
||||
samsung_cpu_id = s3c24xx_read_idcode_v4();
|
||||
}
|
||||
s3c24xx_init_cpu();
|
||||
|
||||
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
|
||||
|
||||
|
||||
@ -16,6 +16,7 @@
|
||||
#include <linux/init.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
|
||||
#include <mach/map.h>
|
||||
#include <mach/dma.h>
|
||||
@ -23,7 +24,6 @@
|
||||
#include <plat/cpu.h>
|
||||
#include <plat/dma-s3c24xx.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <plat/regs-dma.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
|
||||
@ -16,6 +16,7 @@
|
||||
#include <linux/init.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <mach/dma.h>
|
||||
@ -23,7 +24,6 @@
|
||||
#include <plat/dma-s3c24xx.h>
|
||||
#include <plat/cpu.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <plat/regs-dma.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
|
||||
@ -16,6 +16,7 @@
|
||||
#include <linux/init.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
|
||||
#include <mach/map.h>
|
||||
#include <mach/dma.h>
|
||||
@ -23,7 +24,6 @@
|
||||
#include <plat/dma-s3c24xx.h>
|
||||
#include <plat/cpu.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <plat/regs-dma.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
|
||||
@ -16,6 +16,7 @@
|
||||
#include <linux/init.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <mach/dma.h>
|
||||
@ -23,7 +24,6 @@
|
||||
#include <plat/dma-s3c24xx.h>
|
||||
#include <plat/cpu.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <plat/regs-dma.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
|
||||
@ -14,7 +14,7 @@
|
||||
|
||||
#include <mach/map.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
|
||||
#define S3C2410_UART1_OFF (0x4000)
|
||||
#define SHIFT_2440TXF (14-9)
|
||||
|
||||
@ -1,5 +1,4 @@
|
||||
/* linux/arch/arm/plat-samsung/include/plat/rtc-core.h
|
||||
*
|
||||
/*
|
||||
* Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
|
||||
*
|
||||
* Samsung RTC Controller core functions
|
||||
@ -9,19 +8,19 @@
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_PLAT_RTC_CORE_H
|
||||
#define __ASM_PLAT_RTC_CORE_H __FILE__
|
||||
#ifndef __RTC_CORE_H
|
||||
#define __RTC_CORE_H __FILE__
|
||||
|
||||
/* These functions are only for use with the core support code, such as
|
||||
* the cpu specific initialisation code
|
||||
*/
|
||||
|
||||
extern struct platform_device s3c_device_rtc;
|
||||
|
||||
/* re-define device name depending on support. */
|
||||
static inline void s3c_rtc_setname(char *name)
|
||||
{
|
||||
#if defined(CONFIG_S3C_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX)
|
||||
s3c_device_rtc.name = name;
|
||||
#endif
|
||||
}
|
||||
|
||||
#endif /* __ASM_PLAT_RTC_CORE_H */
|
||||
#endif /* __RTC_CORE_H */
|
||||
@ -1,15 +0,0 @@
|
||||
/* linux/arch/arm/mach-s3c2410/include/mach/tick.h
|
||||
*
|
||||
* Copyright 2008 Simtec Electronics
|
||||
* Ben Dooks <ben@simtec.co.uk>
|
||||
* http://armlinux.simtec.co.uk/
|
||||
*
|
||||
* S3C2410 - timer tick support
|
||||
*/
|
||||
|
||||
#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
|
||||
|
||||
static inline int s3c24xx_ostimer_pending(void)
|
||||
{
|
||||
return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4;
|
||||
}
|
||||
@ -37,6 +37,7 @@
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/proc_fs.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
@ -49,7 +50,6 @@
|
||||
#include <asm/mach-types.h>
|
||||
#include <mach/fb.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/gpio-samsung.h>
|
||||
|
||||
@ -17,6 +17,7 @@
|
||||
#include <linux/init.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ata_platform.h>
|
||||
#include <linux/i2c.h>
|
||||
@ -32,7 +33,6 @@
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
#include <mach/gpio-samsung.h>
|
||||
|
||||
@ -21,6 +21,7 @@
|
||||
#include <linux/init.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/dm9000.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
@ -33,7 +34,6 @@
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
#include <mach/gpio-samsung.h>
|
||||
|
||||
@ -19,6 +19,7 @@
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/syscore_ops.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/dm9000.h>
|
||||
#include <linux/ata_platform.h>
|
||||
@ -55,7 +56,6 @@
|
||||
#include <plat/cpu-freq.h>
|
||||
#include <plat/devs.h>
|
||||
#include <plat/gpio-cfg.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/samsung-time.h>
|
||||
|
||||
#include "bast.h"
|
||||
|
||||
@ -35,6 +35,7 @@
|
||||
#include <linux/workqueue.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/i2c.h>
|
||||
@ -81,7 +82,6 @@
|
||||
#include <plat/devs.h>
|
||||
#include <plat/gpio-cfg.h>
|
||||
#include <plat/pm.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/samsung-time.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
@ -19,6 +19,7 @@
|
||||
#include <linux/init.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/gpio.h>
|
||||
@ -62,7 +63,6 @@
|
||||
#include <plat/gpio-cfg.h>
|
||||
#include <plat/pll.h>
|
||||
#include <plat/pm.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/samsung-time.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
@ -19,6 +19,7 @@
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/syscore_ops.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/i2c.h>
|
||||
|
||||
@ -31,7 +32,6 @@
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/irq.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <linux/platform_data/mtd-nand-s3c2410.h>
|
||||
#include <linux/platform_data/i2c-s3c2410.h>
|
||||
|
||||
|
||||
@ -23,6 +23,7 @@
|
||||
#include <linux/input.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/dm9000.h>
|
||||
#include <linux/platform_data/at24.h>
|
||||
#include <linux/platform_device.h>
|
||||
@ -37,7 +38,6 @@
|
||||
#include <mach/fb.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <linux/platform_data/leds-s3c24xx.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
|
||||
@ -24,6 +24,7 @@
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/timer.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/mmc/host.h>
|
||||
@ -43,7 +44,6 @@
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
#include <linux/platform_data/i2c-s3c2410.h>
|
||||
#include <plat/regs-serial.h>
|
||||
|
||||
#include <plat/clock.h>
|
||||
#include <plat/cpu.h>
|
||||
|
||||
@ -21,6 +21,7 @@
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/string.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
@ -38,7 +39,6 @@
|
||||
//#include <asm/debug-ll.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/gpio-samsung.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <linux/platform_data/i2c-s3c2410.h>
|
||||
|
||||
#include <plat/gpio-cfg.h>
|
||||
|
||||
@ -18,6 +18,7 @@
|
||||
#include <linux/device.h>
|
||||
#include <linux/syscore_ops.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/io.h>
|
||||
@ -44,7 +45,6 @@
|
||||
#include <plat/cpu-freq.h>
|
||||
#include <plat/devs.h>
|
||||
#include <plat/gpio-cfg.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/samsung-time.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
|
||||
@ -15,6 +15,7 @@
|
||||
#include <linux/timer.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
@ -32,7 +33,6 @@
|
||||
#include <plat/clock.h>
|
||||
#include <plat/cpu.h>
|
||||
#include <plat/devs.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/samsung-time.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
@ -31,6 +31,7 @@
|
||||
#include <linux/device.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/spi_gpio.h>
|
||||
#include <linux/io.h>
|
||||
@ -49,7 +50,6 @@
|
||||
|
||||
#include <linux/platform_data/leds-s3c24xx.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/fb.h>
|
||||
#include <linux/platform_data/mtd-nand-s3c2410.h>
|
||||
#include <linux/platform_data/usb-s3c2410_udc.h>
|
||||
|
||||
@ -21,6 +21,7 @@
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/gpio_keys.h>
|
||||
#include <linux/device.h>
|
||||
@ -57,7 +58,6 @@
|
||||
#include <plat/cpu.h>
|
||||
#include <plat/devs.h>
|
||||
#include <plat/pm.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/samsung-time.h>
|
||||
#include <plat/gpio-cfg.h>
|
||||
|
||||
|
||||
@ -23,6 +23,7 @@
|
||||
#include <linux/device.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/serial.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
@ -49,7 +50,6 @@
|
||||
#include <plat/cpu.h>
|
||||
#include <plat/devs.h>
|
||||
#include <plat/pm.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/samsung-time.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
@ -19,13 +19,13 @@
|
||||
#include <linux/irqchip.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <mach/map.h>
|
||||
|
||||
#include <plat/cpu.h>
|
||||
#include <plat/pm.h>
|
||||
#include <plat/regs-serial.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
|
||||
@ -35,6 +35,7 @@
|
||||
#include <linux/timer.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
@ -46,7 +47,6 @@
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <linux/platform_data/i2c-s3c2410.h>
|
||||
|
||||
#include <plat/devs.h>
|
||||
|
||||
@ -19,6 +19,7 @@
|
||||
#include <linux/init.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
@ -33,7 +34,6 @@
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
//#include <asm/debug-ll.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
|
||||
|
||||
@ -18,6 +18,7 @@
|
||||
#include <linux/timer.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
@ -34,7 +35,6 @@
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
#include <mach/regs-s3c2443-clock.h>
|
||||
|
||||
@ -20,6 +20,7 @@
|
||||
#include <linux/timer.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
@ -31,7 +32,6 @@
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
|
||||
|
||||
@ -20,6 +20,7 @@
|
||||
#include <linux/timer.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
@ -31,7 +32,6 @@
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
|
||||
|
||||
@ -33,6 +33,7 @@
|
||||
#include <linux/device.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
@ -44,7 +45,6 @@
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <linux/platform_data/i2c-s3c2410.h>
|
||||
#include <plat/devs.h>
|
||||
#include <plat/cpu.h>
|
||||
|
||||
@ -25,6 +25,7 @@
|
||||
#include <linux/tty.h>
|
||||
#include <linux/serial_8250.h>
|
||||
#include <linux/serial_reg.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
@ -45,7 +46,6 @@
|
||||
#include <plat/clock.h>
|
||||
#include <plat/cpu.h>
|
||||
#include <plat/devs.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/samsung-time.h>
|
||||
|
||||
#include "bast.h"
|
||||
|
||||
@ -16,6 +16,7 @@
|
||||
#include <linux/timer.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
@ -32,7 +33,6 @@
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
|
||||
|
||||
@ -33,9 +33,9 @@
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-clock.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-irq.h>
|
||||
|
||||
@ -21,6 +21,7 @@
|
||||
#include <linux/device.h>
|
||||
#include <linux/syscore_ops.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/reboot.h>
|
||||
#include <linux/io.h>
|
||||
@ -37,7 +38,6 @@
|
||||
#include <plat/cpu-freq.h>
|
||||
|
||||
#include <mach/regs-clock.h>
|
||||
#include <plat/regs-serial.h>
|
||||
|
||||
#include <plat/cpu.h>
|
||||
#include <plat/devs.h>
|
||||
|
||||
@ -20,6 +20,7 @@
|
||||
#include <linux/device.h>
|
||||
#include <linux/syscore_ops.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/reboot.h>
|
||||
@ -43,7 +44,6 @@
|
||||
#include <plat/nand-core.h>
|
||||
#include <plat/pll.h>
|
||||
#include <plat/pm.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/regs-spi.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
@ -48,6 +48,7 @@
|
||||
#include <asm/system_misc.h>
|
||||
|
||||
#include <mach/regs-s3c2443-clock.h>
|
||||
#include <mach/rtc-core.h>
|
||||
|
||||
#include <plat/gpio-core.h>
|
||||
#include <plat/gpio-cfg.h>
|
||||
@ -61,7 +62,6 @@
|
||||
#include <plat/fb-core.h>
|
||||
#include <plat/nand-core.h>
|
||||
#include <plat/adc-core.h>
|
||||
#include <plat/rtc-core.h>
|
||||
#include <plat/spi-core.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
@ -34,6 +34,7 @@
|
||||
#include <asm/system_misc.h>
|
||||
|
||||
#include <mach/regs-s3c2443-clock.h>
|
||||
#include <mach/rtc-core.h>
|
||||
|
||||
#include <plat/gpio-core.h>
|
||||
#include <plat/gpio-cfg.h>
|
||||
@ -43,7 +44,6 @@
|
||||
#include <plat/fb-core.h>
|
||||
#include <plat/nand-core.h>
|
||||
#include <plat/adc-core.h>
|
||||
#include <plat/rtc-core.h>
|
||||
#include <plat/spi-core.h>
|
||||
|
||||
static struct map_desc s3c2443_iodesc[] __initdata = {
|
||||
|
||||
@ -17,6 +17,7 @@
|
||||
#include <linux/timer.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/reboot.h>
|
||||
#include <linux/device.h>
|
||||
@ -35,7 +36,6 @@
|
||||
#include <plat/cpu-freq.h>
|
||||
|
||||
#include <mach/regs-clock.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
|
||||
#include <plat/clock.h>
|
||||
|
||||
@ -25,13 +25,13 @@
|
||||
*/
|
||||
|
||||
#include <linux/linkage.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <asm/assembler.h>
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/map.h>
|
||||
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-clock.h>
|
||||
#include <plat/regs-serial.h>
|
||||
|
||||
#include "regs-mem.h"
|
||||
|
||||
|
||||
@ -25,13 +25,13 @@
|
||||
*/
|
||||
|
||||
#include <linux/linkage.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <asm/assembler.h>
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/map.h>
|
||||
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-clock.h>
|
||||
#include <plat/regs-serial.h>
|
||||
|
||||
/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
|
||||
* reset the UART configuration, only enable if you really need this!
|
||||
|
||||
@ -25,6 +25,7 @@
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/reboot.h>
|
||||
#include <linux/io.h>
|
||||
@ -50,7 +51,6 @@
|
||||
#include <plat/irq-uart.h>
|
||||
#include <plat/pwm-core.h>
|
||||
#include <plat/regs-irqtype.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/watchdog-reset.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
@ -12,8 +12,8 @@
|
||||
|
||||
/* pull in the relevant register and map files. */
|
||||
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <mach/map.h>
|
||||
#include <plat/regs-serial.h>
|
||||
|
||||
/* note, for the boot process to work we have to keep the UART
|
||||
* virtual address aligned to an 1MiB boundary for the L1
|
||||
|
||||
@ -1,31 +0,0 @@
|
||||
/* linux/arch/arm/mach-s3c6400/include/mach/tick.h
|
||||
*
|
||||
* Copyright 2008 Openmoko, Inc.
|
||||
* Copyright 2008 Simtec Electronics
|
||||
* http://armlinux.simtec.co.uk/
|
||||
* Ben Dooks <ben@simtec.co.uk>
|
||||
*
|
||||
* S3C64XX - Timer tick support definitions
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_TICK_H
|
||||
#define __ASM_ARCH_TICK_H __FILE__
|
||||
|
||||
#include <linux/irqchip/arm-vic.h>
|
||||
|
||||
/* note, the timer interrutps turn up in 2 places, the vic and then
|
||||
* the timer block. We take the VIC as the base at the moment.
|
||||
*/
|
||||
static inline u32 s3c24xx_ostimer_pending(void)
|
||||
{
|
||||
u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
|
||||
return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
|
||||
}
|
||||
|
||||
#define TICK_MAX (0xffffffff)
|
||||
|
||||
#endif /* __ASM_ARCH_6400_TICK_H */
|
||||
@ -20,13 +20,13 @@
|
||||
#include <linux/syscore_ops.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/of.h>
|
||||
|
||||
#include <mach/map.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <plat/cpu.h>
|
||||
#include <plat/pm.h>
|
||||
|
||||
@ -20,6 +20,7 @@
|
||||
#include <linux/timer.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/i2c.h>
|
||||
@ -41,7 +42,6 @@
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <linux/platform_data/i2c-s3c2410.h>
|
||||
#include <plat/fb.h>
|
||||
|
||||
|
||||
@ -14,6 +14,7 @@
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/list.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/fb.h>
|
||||
#include <linux/io.h>
|
||||
@ -51,7 +52,6 @@
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/gpio-samsung.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/fb.h>
|
||||
#include <plat/sdhci.h>
|
||||
#include <plat/gpio-cfg.h>
|
||||
|
||||
@ -11,6 +11,7 @@
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/i2c.h>
|
||||
@ -33,7 +34,6 @@
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <linux/platform_data/i2c-s3c2410.h>
|
||||
#include <mach/gpio-samsung.h>
|
||||
#include <plat/fb.h>
|
||||
|
||||
@ -22,6 +22,7 @@
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/types.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
@ -38,7 +39,6 @@
|
||||
#include <plat/fb.h>
|
||||
#include <linux/platform_data/mtd-nand-s3c2410.h>
|
||||
#include <linux/platform_data/mmc-sdhci-s3c.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/sdhci.h>
|
||||
#include <linux/platform_data/touchscreen-s3c2410.h>
|
||||
|
||||
|
||||
@ -16,6 +16,7 @@
|
||||
#include <linux/timer.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/i2c.h>
|
||||
@ -36,7 +37,6 @@
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <linux/platform_data/i2c-s3c2410.h>
|
||||
#include <plat/fb.h>
|
||||
|
||||
|
||||
@ -23,6 +23,7 @@
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/types.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
@ -38,7 +39,6 @@
|
||||
#include <plat/devs.h>
|
||||
#include <plat/fb.h>
|
||||
#include <linux/platform_data/mtd-nand-s3c2410.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <linux/platform_data/touchscreen-s3c2410.h>
|
||||
|
||||
#include <video/platform_lcd.h>
|
||||
|
||||
@ -16,6 +16,7 @@
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pwm_backlight.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/spi/spi_gpio.h>
|
||||
#include <linux/usb/gpio_vbus.h>
|
||||
#include <linux/platform_data/s3c-hsotg.h>
|
||||
@ -33,7 +34,6 @@
|
||||
#include <linux/platform_data/i2c-s3c2410.h>
|
||||
#include <plat/gpio-cfg.h>
|
||||
#include <linux/platform_data/hwmon-s3c.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <linux/platform_data/usb-ohci-s3c2410.h>
|
||||
#include <plat/sdhci.h>
|
||||
#include <linux/platform_data/touchscreen-s3c2410.h>
|
||||
|
||||
@ -16,6 +16,7 @@
|
||||
#include <linux/timer.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/io.h>
|
||||
@ -29,8 +30,6 @@
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/map.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
|
||||
#include <plat/clock.h>
|
||||
#include <plat/devs.h>
|
||||
#include <plat/cpu.h>
|
||||
|
||||
@ -19,6 +19,7 @@
|
||||
#include <linux/init.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/i2c.h>
|
||||
@ -55,7 +56,6 @@
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/gpio-samsung.h>
|
||||
#include <linux/platform_data/ata-samsung_cf.h>
|
||||
|
||||
@ -23,6 +23,7 @@
|
||||
#include <linux/io.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/of.h>
|
||||
|
||||
@ -34,7 +35,6 @@
|
||||
#include <asm/irq.h>
|
||||
|
||||
#include <plat/cpu-freq.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-clock.h>
|
||||
|
||||
#include <plat/cpu.h>
|
||||
|
||||
@ -24,6 +24,7 @@
|
||||
#include <linux/io.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/of.h>
|
||||
|
||||
@ -35,7 +36,6 @@
|
||||
#include <asm/irq.h>
|
||||
|
||||
#include <plat/cpu-freq.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-clock.h>
|
||||
|
||||
#include <plat/cpu.h>
|
||||
|
||||
@ -19,6 +19,7 @@
|
||||
#include <linux/io.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <clocksource/samsung_pwm.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/sched.h>
|
||||
@ -50,7 +51,6 @@
|
||||
#include <plat/gpio-cfg.h>
|
||||
#include <plat/pwm-core.h>
|
||||
#include <plat/regs-irqtype.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/watchdog-reset.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
@ -10,11 +10,10 @@
|
||||
|
||||
/* pull in the relevant register and map files. */
|
||||
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <plat/map-base.h>
|
||||
#include <plat/map-s5p.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
|
||||
.macro addruart, rp, rv, tmp
|
||||
mov \rp, #0xE0000000
|
||||
orr \rp, \rp, #0x00100000
|
||||
|
||||
@ -14,9 +14,9 @@
|
||||
|
||||
#include <linux/syscore_ops.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/pm.h>
|
||||
|
||||
#include <mach/regs-gpio.h>
|
||||
|
||||
@ -17,6 +17,7 @@
|
||||
#include <linux/init.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/module.h>
|
||||
@ -39,7 +40,6 @@
|
||||
#include <mach/regs-clock.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/gpio-cfg.h>
|
||||
#include <plat/clock.h>
|
||||
#include <plat/devs.h>
|
||||
|
||||
@ -17,6 +17,7 @@
|
||||
#include <linux/init.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/module.h>
|
||||
@ -39,7 +40,6 @@
|
||||
#include <mach/regs-clock.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/gpio-cfg.h>
|
||||
#include <plat/clock.h>
|
||||
#include <plat/devs.h>
|
||||
|
||||
@ -22,6 +22,7 @@
|
||||
#include <linux/io.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <clocksource/samsung_pwm.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/sched.h>
|
||||
@ -49,7 +50,6 @@
|
||||
#include <plat/onenand-core.h>
|
||||
#include <plat/pwm-core.h>
|
||||
#include <plat/spi-core.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/watchdog-reset.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
@ -13,8 +13,8 @@
|
||||
|
||||
/* pull in the relevant register and map files. */
|
||||
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <mach/map.h>
|
||||
#include <plat/regs-serial.h>
|
||||
|
||||
/* note, for the boot process to work we have to keep the UART
|
||||
* virtual address aligned to an 1MiB boundary for the L1
|
||||
|
||||
@ -1,31 +0,0 @@
|
||||
/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
|
||||
*
|
||||
* Copyright 2009 Samsung Electronics Co.
|
||||
* Byungho Min <bhmin@samsung.com>
|
||||
*
|
||||
* S3C64XX - Timer tick support definitions
|
||||
*
|
||||
* Based on mach-s3c6400/include/mach/tick.h
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_TICK_H
|
||||
#define __ASM_ARCH_TICK_H __FILE__
|
||||
|
||||
#include <linux/irqchip/arm-vic.h>
|
||||
|
||||
/* note, the timer interrutps turn up in 2 places, the vic and then
|
||||
* the timer block. We take the VIC as the base at the moment.
|
||||
*/
|
||||
static inline u32 s3c24xx_ostimer_pending(void)
|
||||
{
|
||||
u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
|
||||
return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
|
||||
}
|
||||
|
||||
#define TICK_MAX (0xffffffff)
|
||||
|
||||
#endif /* __ASM_ARCH_TICK_H */
|
||||
@ -16,6 +16,7 @@
|
||||
#include <linux/timer.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/gpio.h>
|
||||
@ -37,7 +38,6 @@
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/gpio-cfg.h>
|
||||
|
||||
#include <plat/clock.h>
|
||||
|
||||
@ -24,6 +24,7 @@
|
||||
#include <linux/sched.h>
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
|
||||
#include <asm/proc-fns.h>
|
||||
#include <asm/mach/arch.h>
|
||||
@ -46,7 +47,6 @@
|
||||
#include <plat/pwm-core.h>
|
||||
#include <plat/tv-core.h>
|
||||
#include <plat/spi-core.h>
|
||||
#include <plat/regs-serial.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
|
||||
@ -12,8 +12,8 @@
|
||||
|
||||
/* pull in the relevant register and map files. */
|
||||
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <mach/map.h>
|
||||
#include <plat/regs-serial.h>
|
||||
|
||||
/* note, for the boot process to work we have to keep the UART
|
||||
* virtual address aligned to an 1MiB boundary for the L1
|
||||
|
||||
@ -12,6 +12,7 @@
|
||||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/fb.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/i2c-gpio.h>
|
||||
@ -32,7 +33,6 @@
|
||||
#include <mach/regs-clock.h>
|
||||
|
||||
#include <plat/gpio-cfg.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/devs.h>
|
||||
#include <plat/cpu.h>
|
||||
#include <plat/fb.h>
|
||||
|
||||
@ -12,6 +12,7 @@
|
||||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/fb.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/i2c-gpio.h>
|
||||
@ -39,7 +40,6 @@
|
||||
#include <mach/regs-clock.h>
|
||||
|
||||
#include <plat/gpio-cfg.h>
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/devs.h>
|
||||
#include <plat/cpu.h>
|
||||
#include <plat/fb.h>
|
||||
|
||||
@ -12,6 +12,7 @@
|
||||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/device.h>
|
||||
|
||||
@ -23,7 +24,6 @@
|
||||
#include <mach/map.h>
|
||||
#include <mach/regs-clock.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/devs.h>
|
||||
#include <plat/cpu.h>
|
||||
#include <linux/platform_data/ata-samsung_cf.h>
|
||||
|
||||
@ -13,6 +13,7 @@
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/dm9000.h>
|
||||
#include <linux/fb.h>
|
||||
@ -32,7 +33,6 @@
|
||||
#include <mach/map.h>
|
||||
#include <mach/regs-clock.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/regs-srom.h>
|
||||
#include <plat/gpio-cfg.h>
|
||||
#include <plat/devs.h>
|
||||
|
||||
@ -13,6 +13,7 @@
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_s3c.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
@ -22,7 +23,6 @@
|
||||
#include <mach/map.h>
|
||||
#include <mach/regs-clock.h>
|
||||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <plat/devs.h>
|
||||
#include <plat/cpu.h>
|
||||
#include <linux/platform_data/i2c-s3c2410.h>
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user