Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
1GbE Intel Wired LAN Driver Updates 2019-07-24

This series contains updates to igc and e1000e client drivers only.

Sasha provides a couple of cleanups to remove code that is not needed
and reduce structure sizes.  Updated the MAC reset flow to use the
device reset flow instead of a port reset flow.  Added addition device
id's that will be supported.

Kai-Heng Feng provides a workaround for a possible stalled packet issue
in our ICH devices due to a clock recovery from the PCH being too slow.

v2: removed the last patch in the series that supposedly fixed a MAC/PHY
    de-sync potential issue while waiting for additional information from
    hardware engineers.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/e1000e/ich8lan.c

@@ -1429,6 +1429,16 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 			else
 				phy_reg |= 0xFA;
 			e1e_wphy_locked(hw, I217_PLL_CLOCK_GATE_REG, phy_reg);
+
+			if (speed == SPEED_1000) {
+				hw->phy.ops.read_reg_locked(hw, HV_PM_CTRL,
+							    &phy_reg);
+
+				phy_reg |= HV_PM_CTRL_K1_CLK_REQ;
+
+				hw->phy.ops.write_reg_locked(hw, HV_PM_CTRL,
+							     phy_reg);
+			}
 		}
 		hw->phy.ops.release(hw);
 

drivers/net/ethernet/intel/e1000e/ich8lan.h

@@ -210,7 +210,7 @@
 
 /* PHY Power Management Control */
 #define HV_PM_CTRL		PHY_REG(770, 17)
-#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA	0x100
+#define HV_PM_CTRL_K1_CLK_REQ		0x200
 #define HV_PM_CTRL_K1_ENABLE		0x4000
 
 #define I217_PLL_CLOCK_GATE_REG	PHY_REG(772, 28)

drivers/net/ethernet/intel/igc/igc_base.c

@@ -40,7 +40,7 @@ static s32 igc_reset_hw_base(struct igc_hw *hw)
 	ctrl = rd32(IGC_CTRL);
 
 	hw_dbg("Issuing a global reset to MAC\n");
-	wr32(IGC_CTRL, ctrl | IGC_CTRL_RST);
+	wr32(IGC_CTRL, ctrl | IGC_CTRL_DEV_RST);
 
 	ret_val = igc_get_auto_rd_done(hw);
 	if (ret_val) {
@@ -209,6 +209,9 @@ static s32 igc_get_invariants_base(struct igc_hw *hw)
 	switch (hw->device_id) {
 	case IGC_DEV_ID_I225_LM:
 	case IGC_DEV_ID_I225_V:
+	case IGC_DEV_ID_I225_I:
+	case IGC_DEV_ID_I220_V:
+	case IGC_DEV_ID_I225_K:
 		mac->type = igc_i225;
 		break;
 	default:

drivers/net/ethernet/intel/igc/igc_defines.h

@@ -54,7 +54,7 @@
 #define IGC_ERR_SWFW_SYNC		13
 
 /* Device Control */
-#define IGC_CTRL_RST		0x04000000  /* Global reset */
+#define IGC_CTRL_DEV_RST	0x20000000  /* Device reset */
 
 #define IGC_CTRL_PHY_RST	0x80000000  /* PHY Reset */
 #define IGC_CTRL_SLU		0x00000040  /* Set link up (Force Link) */

drivers/net/ethernet/intel/igc/igc_hw.h

@@ -18,6 +18,9 @@
 
 #define IGC_DEV_ID_I225_LM			0x15F2
 #define IGC_DEV_ID_I225_V			0x15F3
+#define IGC_DEV_ID_I225_I			0x15F8
+#define IGC_DEV_ID_I220_V			0x15F7
+#define IGC_DEV_ID_I225_K			0x3100
 
 #define IGC_FUNC_0				0
 
@@ -151,16 +154,10 @@ struct igc_phy_info {
 
 	u16 autoneg_advertised;
 	u16 autoneg_mask;
-	u16 cable_length;
-	u16 max_cable_length;
-	u16 min_cable_length;
-	u16 pair_length[4];
 
 	u8 mdix;
 
-	bool disable_polarity_correction;
 	bool is_mdix;
-	bool polarity_correction;
 	bool reset_disable;
 	bool speed_downgraded;
 	bool autoneg_wait_to_complete;
@@ -190,12 +187,7 @@ struct igc_fc_info {
 };
 
 struct igc_dev_spec_base {
-	bool global_device_reset;
-	bool eee_disable;
 	bool clear_semaphore_once;
-	bool module_plugged;
-	u8 media_port;
-	bool mas_capable;
 };
 
 struct igc_hw {

drivers/net/ethernet/intel/igc/igc_main.c

@@ -36,6 +36,9 @@ static const struct igc_info *igc_info_tbl[] = {
 static const struct pci_device_id igc_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, IGC_DEV_ID_I225_LM), board_base },
 	{ PCI_VDEVICE(INTEL, IGC_DEV_ID_I225_V), board_base },
+	{ PCI_VDEVICE(INTEL, IGC_DEV_ID_I225_I), board_base },
+	{ PCI_VDEVICE(INTEL, IGC_DEV_ID_I220_V), board_base },
+	{ PCI_VDEVICE(INTEL, IGC_DEV_ID_I225_K), board_base },
 	/* required last entry */
 	{0, }
 };