mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings
Convert USB DWC3 bindings to DT schema format using json-schema. Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
This commit is contained in:
Sandeep Maheswaram
Felipe Balbi
parent
fcd2def663
commit
cd4b54e2ae
@ -1,104 +0,0 @@
|
|||||||
Qualcomm SuperSpeed DWC3 USB SoC controller
|
|
||||||
|
|
||||||
Required properties:
|
|
||||||
- compatible: Compatible list, contains
|
|
||||||
"qcom,dwc3"
|
|
||||||
"qcom,msm8996-dwc3" for msm8996 SOC.
|
|
||||||
"qcom,msm8998-dwc3" for msm8998 SOC.
|
|
||||||
"qcom,sdm845-dwc3" for sdm845 SOC.
|
|
||||||
- reg: Offset and length of register set for QSCRATCH wrapper
|
|
||||||
- power-domains: specifies a phandle to PM domain provider node
|
|
||||||
- clocks: A list of phandle + clock-specifier pairs for the
|
|
||||||
clocks listed in clock-names
|
|
||||||
- clock-names: Should contain the following:
|
|
||||||
"core" Master/Core clock, have to be >= 125 MHz for SS
|
|
||||||
operation and >= 60MHz for HS operation
|
|
||||||
"mock_utmi" Mock utmi clock needed for ITP/SOF generation in
|
|
||||||
host mode. Its frequency should be 19.2MHz.
|
|
||||||
"sleep" Sleep clock, used for wakeup when USB3 core goes
|
|
||||||
into low power mode (U3).
|
|
||||||
|
|
||||||
Optional clocks:
|
|
||||||
"iface" System bus AXI clock.
|
|
||||||
Not present on "qcom,msm8996-dwc3" compatible.
|
|
||||||
"cfg_noc" System Config NOC clock.
|
|
||||||
Not present on "qcom,msm8996-dwc3" compatible.
|
|
||||||
- assigned-clocks: Should be:
|
|
||||||
MOCK_UTMI_CLK
|
|
||||||
MASTER_CLK
|
|
||||||
- assigned-clock-rates: Should be:
|
|
||||||
19.2Mhz (192000000) for MOCK_UTMI_CLK
|
|
||||||
>=125Mhz (125000000) for MASTER_CLK in SS mode
|
|
||||||
>=60Mhz (60000000) for MASTER_CLK in HS mode
|
|
||||||
|
|
||||||
Optional properties:
|
|
||||||
- resets: Phandle to reset control that resets core and wrapper.
|
|
||||||
- interrupts: specifies interrupts from controller wrapper used
|
|
||||||
to wakeup from low power/susepnd state. Must contain
|
|
||||||
one or more entry for interrupt-names property
|
|
||||||
- interrupt-names: Must include the following entries:
|
|
||||||
- "hs_phy_irq": The interrupt that is asserted when a
|
|
||||||
wakeup event is received on USB2 bus
|
|
||||||
- "ss_phy_irq": The interrupt that is asserted when a
|
|
||||||
wakeup event is received on USB3 bus
|
|
||||||
- "dm_hs_phy_irq" and "dp_hs_phy_irq": Separate
|
|
||||||
interrupts for any wakeup event on DM and DP lines
|
|
||||||
- qcom,select-utmi-as-pipe-clk: if present, disable USB3 pipe_clk requirement.
|
|
||||||
Used when dwc3 operates without SSPHY and only
|
|
||||||
HS/FS/LS modes are supported.
|
|
||||||
|
|
||||||
Required child node:
|
|
||||||
A child node must exist to represent the core DWC3 IP block. The name of
|
|
||||||
the node is not important. The content of the node is defined in dwc3.txt.
|
|
||||||
|
|
||||||
Phy documentation is provided in the following places:
|
|
||||||
Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY
|
|
||||||
Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml - USB2 QUSB2 PHY
|
|
||||||
|
|
||||||
Example device nodes:
|
|
||||||
|
|
||||||
hs_phy: phy@100f8800 {
|
|
||||||
compatible = "qcom,qusb2-v2-phy";
|
|
||||||
...
|
|
||||||
};
|
|
||||||
|
|
||||||
ss_phy: phy@100f8830 {
|
|
||||||
compatible = "qcom,qmp-v3-usb3-phy";
|
|
||||||
...
|
|
||||||
};
|
|
||||||
|
|
||||||
usb3_0: usb30@a6f8800 {
|
|
||||||
compatible = "qcom,dwc3";
|
|
||||||
reg = <0xa6f8800 0x400>;
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <1>;
|
|
||||||
ranges;
|
|
||||||
|
|
||||||
interrupts = <0 131 0>, <0 486 0>, <0 488 0>, <0 489 0>;
|
|
||||||
interrupt-names = "hs_phy_irq", "ss_phy_irq",
|
|
||||||
"dm_hs_phy_irq", "dp_hs_phy_irq";
|
|
||||||
|
|
||||||
clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>,
|
|
||||||
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
|
|
||||||
<&gcc GCC_USB30_PRIM_SLEEP_CLK>;
|
|
||||||
clock-names = "core", "mock_utmi", "sleep";
|
|
||||||
|
|
||||||
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
|
|
||||||
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
|
|
||||||
assigned-clock-rates = <19200000>, <133000000>;
|
|
||||||
|
|
||||||
resets = <&gcc GCC_USB30_PRIM_BCR>;
|
|
||||||
reset-names = "core_reset";
|
|
||||||
power-domains = <&gcc USB30_PRIM_GDSC>;
|
|
||||||
qcom,select-utmi-as-pipe-clk;
|
|
||||||
|
|
||||||
dwc3@10000000 {
|
|
||||||
compatible = "snps,dwc3";
|
|
||||||
reg = <0x10000000 0xcd00>;
|
|
||||||
interrupts = <0 205 0x4>;
|
|
||||||
phys = <&hs_phy>, <&ss_phy>;
|
|
||||||
phy-names = "usb2-phy", "usb3-phy";
|
|
||||||
dr_mode = "host";
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
158
Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
Normal file
158
Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
Normal file
@ -0,0 +1,158 @@
|
|||||||
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||||
|
|
||||||
|
%YAML 1.2
|
||||||
|
---
|
||||||
|
$id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
|
||||||
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
|
||||||
|
title: Qualcomm SuperSpeed DWC3 USB SoC controller
|
||||||
|
|
||||||
|
maintainers:
|
||||||
|
- Manu Gautam <mgautam@codeaurora.org>
|
||||||
|
|
||||||
|
properties:
|
||||||
|
compatible:
|
||||||
|
items:
|
||||||
|
- enum:
|
||||||
|
- qcom,msm8996-dwc3
|
||||||
|
- qcom,msm8998-dwc3
|
||||||
|
- qcom,sdm845-dwc3
|
||||||
|
- const: qcom,dwc3
|
||||||
|
|
||||||
|
reg:
|
||||||
|
description: Offset and length of register set for QSCRATCH wrapper
|
||||||
|
maxItems: 1
|
||||||
|
|
||||||
|
"#address-cells":
|
||||||
|
enum: [ 1, 2 ]
|
||||||
|
|
||||||
|
"#size-cells":
|
||||||
|
enum: [ 1, 2 ]
|
||||||
|
|
||||||
|
power-domains:
|
||||||
|
description: specifies a phandle to PM domain provider node
|
||||||
|
maxItems: 1
|
||||||
|
|
||||||
|
clocks:
|
||||||
|
description:
|
||||||
|
A list of phandle and clock-specifier pairs for the clocks
|
||||||
|
listed in clock-names.
|
||||||
|
items:
|
||||||
|
- description: System Config NOC clock.
|
||||||
|
- description: Master/Core clock, has to be >= 125 MHz
|
||||||
|
for SS operation and >= 60MHz for HS operation.
|
||||||
|
- description: System bus AXI clock.
|
||||||
|
- description: Mock utmi clock needed for ITP/SOF generation
|
||||||
|
in host mode. Its frequency should be 19.2MHz.
|
||||||
|
- description: Sleep clock, used for wakeup when
|
||||||
|
USB3 core goes into low power mode (U3).
|
||||||
|
|
||||||
|
clock-names:
|
||||||
|
items:
|
||||||
|
- const: cfg_noc
|
||||||
|
- const: core
|
||||||
|
- const: iface
|
||||||
|
- const: mock_utmi
|
||||||
|
- const: sleep
|
||||||
|
|
||||||
|
assigned-clocks:
|
||||||
|
items:
|
||||||
|
- description: Phandle and clock specifier of MOCK_UTMI_CLK.
|
||||||
|
- description: Phandle and clock specifoer of MASTER_CLK.
|
||||||
|
|
||||||
|
assigned-clock-rates:
|
||||||
|
maxItems: 2
|
||||||
|
items:
|
||||||
|
- description: Must be 19.2MHz (19200000).
|
||||||
|
- description: Must be >= 60 MHz in HS mode, >= 125 MHz in SS mode.
|
||||||
|
|
||||||
|
resets:
|
||||||
|
maxItems: 1
|
||||||
|
|
||||||
|
interrupts:
|
||||||
|
items:
|
||||||
|
- description: The interrupt that is asserted
|
||||||
|
when a wakeup event is received on USB2 bus.
|
||||||
|
- description: The interrupt that is asserted
|
||||||
|
when a wakeup event is received on USB3 bus.
|
||||||
|
- description: Wakeup event on DM line.
|
||||||
|
- description: Wakeup event on DP line.
|
||||||
|
|
||||||
|
interrupt-names:
|
||||||
|
items:
|
||||||
|
- const: hs_phy_irq
|
||||||
|
- const: ss_phy_irq
|
||||||
|
- const: dm_hs_phy_irq
|
||||||
|
- const: dp_hs_phy_irq
|
||||||
|
|
||||||
|
qcom,select-utmi-as-pipe-clk:
|
||||||
|
description:
|
||||||
|
If present, disable USB3 pipe_clk requirement.
|
||||||
|
Used when dwc3 operates without SSPHY and only
|
||||||
|
HS/FS/LS modes are supported.
|
||||||
|
type: boolean
|
||||||
|
|
||||||
|
# Required child node:
|
||||||
|
|
||||||
|
patternProperties:
|
||||||
|
"^dwc3@[0-9a-f]+$":
|
||||||
|
type: object
|
||||||
|
description:
|
||||||
|
A child node must exist to represent the core DWC3 IP block
|
||||||
|
The content of the node is defined in dwc3.txt.
|
||||||
|
|
||||||
|
required:
|
||||||
|
- compatible
|
||||||
|
- reg
|
||||||
|
- "#address-cells"
|
||||||
|
- "#size-cells"
|
||||||
|
- power-domains
|
||||||
|
- clocks
|
||||||
|
- clock-names
|
||||||
|
|
||||||
|
examples:
|
||||||
|
- |
|
||||||
|
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
|
||||||
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||||
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||||||
|
usb@a6f8800 {
|
||||||
|
compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
|
||||||
|
reg = <0 0x0a6f8800 0 0x400>;
|
||||||
|
|
||||||
|
#address-cells = <2>;
|
||||||
|
#size-cells = <2>;
|
||||||
|
|
||||||
|
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
|
||||||
|
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
|
||||||
|
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
|
||||||
|
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
|
||||||
|
<&gcc GCC_USB30_PRIM_SLEEP_CLK>;
|
||||||
|
clock-names = "cfg_noc", "core", "iface", "mock_utmi",
|
||||||
|
"sleep";
|
||||||
|
|
||||||
|
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
|
||||||
|
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
|
||||||
|
assigned-clock-rates = <19200000>, <150000000>;
|
||||||
|
|
||||||
|
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
|
||||||
|
<GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
|
||||||
|
<GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
|
||||||
|
<GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
interrupt-names = "hs_phy_irq", "ss_phy_irq",
|
||||||
|
"dm_hs_phy_irq", "dp_hs_phy_irq";
|
||||||
|
|
||||||
|
power-domains = <&gcc USB30_PRIM_GDSC>;
|
||||||
|
|
||||||
|
resets = <&gcc GCC_USB30_PRIM_BCR>;
|
||||||
|
|
||||||
|
dwc3@a600000 {
|
||||||
|
compatible = "snps,dwc3";
|
||||||
|
reg = <0 0x0a600000 0 0xcd00>;
|
||||||
|
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
iommus = <&apps_smmu 0x740 0>;
|
||||||
|
snps,dis_u2_susphy_quirk;
|
||||||
|
snps,dis_enblslpm_quirk;
|
||||||
|
phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
|
||||||
|
phy-names = "usb2-phy", "usb3-phy";
|
||||||
|
};
|
||||||
|
};
|
||||||
Loading…
Reference in New Issue
Block a user