ARM: tegra: cpuidle enhancements

This pull request implements a new "LP2" cpuidle state for Tegra20,
 which makes use of the couple cpuidle feature.
 
 It is based on (most of) the previous pull request, with tag
 tegra-for-3.9-soc-usb.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRCYoCAAoJEMzrak5tbycxB7AP/3CqtxeAR7dhby7p/bNVRSyp
 NJp1Vim7wyM8nW3MW8Ha21ZdEqmeYvEz3d5cPAQwBEN4jc8KRTe06kjiFwlR/9nu
 KKx6X9mHlNAzoi5BHnavhvq1RzUuPxEfptAoEA2w6fUtcfxFlUvo1ToVSUnYd1CC
 0bot9PN6IxbCfrzcwHmcUgB9XLJO/M/RZ+TF+UtOM6bK+7GRtPJoWNzNmTe/uG+d
 qdgvEuX+04Qellbhc/jp8A619T6hGHrpn9N8wxZMfNwfQiwdrv4bAe1oOXIWKYUJ
 Y61R+iPqKeinR6msH7cqALrn+5LlZsFyAv7GRuCq/+4orCoghx+hZXB9kEibXxPu
 PBiHXYVXPYDSWGK8toJ0sEtbE2blzoQDq7HanYX7+HG70mz5dLyLeHLVVO3ekepd
 aPxiOBP7h/zabJ6ptZnOUCIgFjT6hYoUQrA/IeH5mkMQwZn84ivl4xMACMKoyawz
 5icfTLxD9TlJuZWHZ61rAbDCYRiggo1C01b/woke7oMuIXtiN1F6Pudj8n2yYM0Q
 IwStxy2OEiN1TI9PXzbSAYn2+MKp7GPh8/R0uhAODbGnsTi8wNEIHvSBizVNLXU3
 BfyzcF4g7WDuVDYyHPQuDXo+sQdCzBac7U3AbQ3k4JVHY0k3S9U+SzIj5umbxS7I
 s0YjjrNmlTkNeldbij53
 =2BUE
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.9-soc-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc

From Stephen Warren:
ARM: tegra: cpuidle enhancements

This pull request implements a new "LP2" cpuidle state for Tegra20,
which makes use of the couple cpuidle feature.

It is based on (most of) the previous pull request, with tag
tegra-for-3.9-soc-usb.

* tag 'tegra-for-3.9-soc-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: tegra20: cpuidle: apply coupled cpuidle for powered-down mode
  ARM: tegra20: flowctrl: add support for cpu_suspend_enter/exit
  clk: tegra20: Implementing CPU low-power function for tegra_cpu_car_ops
  ARM: tegra20: cpuidle: add powered-down state for secondary CPU
  ARM: tegra: add pending SGI checking API

Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2013-02-05 12:46:11 -08:00
commit c8bfea3636
11 changed files with 609 additions and 9 deletions

View File

@ -4,6 +4,7 @@ comment "NVIDIA Tegra options"
config ARCH_TEGRA_2x_SOC
bool "Enable support for Tegra20 family"
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
select ARCH_REQUIRE_GPIOLIB
select ARM_ERRATA_720789
select ARM_ERRATA_742230 if SMP

View File

@ -22,21 +22,199 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/clockchips.h>
#include <linux/clk/tegra.h>
#include <asm/cpuidle.h>
#include <asm/proc-fns.h>
#include <asm/suspend.h>
#include <asm/smp_plat.h>
#include "pm.h"
#include "sleep.h"
#include "iomap.h"
#include "irq.h"
#include "flowctrl.h"
#ifdef CONFIG_PM_SLEEP
static bool abort_flag;
static atomic_t abort_barrier;
static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index);
#endif
static struct cpuidle_state tegra_idle_states[] = {
[0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
#ifdef CONFIG_PM_SLEEP
[1] = {
.enter = tegra20_idle_lp2_coupled,
.exit_latency = 5000,
.target_residency = 10000,
.power_usage = 0,
.flags = CPUIDLE_FLAG_TIME_VALID |
CPUIDLE_FLAG_COUPLED,
.name = "powered-down",
.desc = "CPU power gated",
},
#endif
};
static struct cpuidle_driver tegra_idle_driver = {
.name = "tegra_idle",
.owner = THIS_MODULE,
.en_core_tk_irqen = 1,
.state_count = 1,
.states = {
[0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
},
};
static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device);
#ifdef CONFIG_PM_SLEEP
#ifdef CONFIG_SMP
static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
static int tegra20_reset_sleeping_cpu_1(void)
{
int ret = 0;
tegra_pen_lock();
if (readl(pmc + PMC_SCRATCH41) == CPU_RESETTABLE)
tegra20_cpu_shutdown(1);
else
ret = -EINVAL;
tegra_pen_unlock();
return ret;
}
static void tegra20_wake_cpu1_from_reset(void)
{
tegra_pen_lock();
tegra20_cpu_clear_resettable();
/* enable cpu clock on cpu */
tegra_enable_cpu_clock(1);
/* take the CPU out of reset */
tegra_cpu_out_of_reset(1);
/* unhalt the cpu */
flowctrl_write_cpu_halt(1, 0);
tegra_pen_unlock();
}
static int tegra20_reset_cpu_1(void)
{
if (!cpu_online(1) || !tegra20_reset_sleeping_cpu_1())
return 0;
tegra20_wake_cpu1_from_reset();
return -EBUSY;
}
#else
static inline void tegra20_wake_cpu1_from_reset(void)
{
}
static inline int tegra20_reset_cpu_1(void)
{
return 0;
}
#endif
static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
struct cpuidle_state *state = &drv->states[index];
u32 cpu_on_time = state->exit_latency;
u32 cpu_off_time = state->target_residency - state->exit_latency;
while (tegra20_cpu_is_resettable_soon())
cpu_relax();
if (tegra20_reset_cpu_1() || !tegra_cpu_rail_off_ready())
return false;
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu);
tegra_idle_lp2_last(cpu_on_time, cpu_off_time);
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
if (cpu_online(1))
tegra20_wake_cpu1_from_reset();
return true;
}
#ifdef CONFIG_SMP
static bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu);
cpu_suspend(0, tegra20_sleep_cpu_secondary_finish);
tegra20_cpu_clear_resettable();
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
return true;
}
#else
static inline bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
return true;
}
#endif
static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
u32 cpu = is_smp() ? cpu_logical_map(dev->cpu) : dev->cpu;
bool entered_lp2 = false;
if (tegra_pending_sgi())
ACCESS_ONCE(abort_flag) = true;
cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
if (abort_flag) {
cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
abort_flag = false; /* clean flag for next coming */
return -EINTR;
}
local_fiq_disable();
tegra_set_cpu_in_lp2(cpu);
cpu_pm_enter();
if (cpu == 0)
entered_lp2 = tegra20_cpu_cluster_power_down(dev, drv, index);
else
entered_lp2 = tegra20_idle_enter_lp2_cpu_1(dev, drv, index);
cpu_pm_exit();
tegra_clear_cpu_in_lp2(cpu);
local_fiq_enable();
smp_rmb();
return entered_lp2 ? index : 0;
}
#endif
int __init tegra20_cpuidle_init(void)
{
int ret;
@ -44,6 +222,14 @@ int __init tegra20_cpuidle_init(void)
struct cpuidle_device *dev;
struct cpuidle_driver *drv = &tegra_idle_driver;
#ifdef CONFIG_PM_SLEEP
tegra_tear_down_cpu = tegra20_tear_down_cpu;
#endif
drv->state_count = ARRAY_SIZE(tegra_idle_states);
memcpy(drv->states, tegra_idle_states,
drv->state_count * sizeof(drv->states[0]));
ret = cpuidle_register_driver(&tegra_idle_driver);
if (ret) {
pr_err("CPUidle driver registration failed\n");
@ -53,6 +239,9 @@ int __init tegra20_cpuidle_init(void)
for_each_possible_cpu(cpu) {
dev = &per_cpu(tegra_idle_device, cpu);
dev->cpu = cpu;
#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
dev->coupled_cpus = *cpu_possible_mask;
#endif
dev->state_count = drv->state_count;
ret = cpuidle_register_device(dev);

View File

@ -25,6 +25,7 @@
#include "flowctrl.h"
#include "iomap.h"
#include "fuse.h"
static u8 flowctrl_offset_halt_cpu[] = {
FLOW_CTRL_HALT_CPU0_EVENTS,
@ -75,11 +76,26 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid)
int i;
reg = flowctrl_read_cpu_csr(cpuid);
reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfe bitmap */
reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP; /* clear wfi bitmap */
switch (tegra_chip_id) {
case TEGRA20:
/* clear wfe bitmap */
reg &= ~TEGRA20_FLOW_CTRL_CSR_WFE_BITMAP;
/* clear wfi bitmap */
reg &= ~TEGRA20_FLOW_CTRL_CSR_WFI_BITMAP;
/* pwr gating on wfe */
reg |= TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 << cpuid;
break;
case TEGRA30:
/* clear wfe bitmap */
reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
/* clear wfi bitmap */
reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP;
/* pwr gating on wfi */
reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid;
break;
}
reg |= FLOW_CTRL_CSR_INTR_FLAG; /* clear intr flag */
reg |= FLOW_CTRL_CSR_EVENT_FLAG; /* clear event flag */
reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid; /* pwr gating on wfi */
reg |= FLOW_CTRL_CSR_ENABLE; /* pwr gating */
flowctrl_write_cpu_csr(cpuid, reg);
@ -99,8 +115,20 @@ void flowctrl_cpu_suspend_exit(unsigned int cpuid)
/* Disable powergating via flow controller for CPU0 */
reg = flowctrl_read_cpu_csr(cpuid);
reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfe bitmap */
reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP; /* clear wfi bitmap */
switch (tegra_chip_id) {
case TEGRA20:
/* clear wfe bitmap */
reg &= ~TEGRA20_FLOW_CTRL_CSR_WFE_BITMAP;
/* clear wfi bitmap */
reg &= ~TEGRA20_FLOW_CTRL_CSR_WFI_BITMAP;
break;
case TEGRA30:
/* clear wfe bitmap */
reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
/* clear wfi bitmap */
reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP;
break;
}
reg &= ~FLOW_CTRL_CSR_ENABLE; /* clear enable */
reg |= FLOW_CTRL_CSR_INTR_FLAG; /* clear intr */
reg |= FLOW_CTRL_CSR_EVENT_FLAG; /* clear event */

View File

@ -34,6 +34,10 @@
#define FLOW_CTRL_HALT_CPU1_EVENTS 0x14
#define FLOW_CTRL_CPU1_CSR 0x18
#define TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 (1 << 4)
#define TEGRA20_FLOW_CTRL_CSR_WFE_BITMAP (3 << 4)
#define TEGRA20_FLOW_CTRL_CSR_WFI_BITMAP 0
#define TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 (1 << 8)
#define TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP (0xF << 4)
#define TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP (0xF << 8)

View File

@ -44,6 +44,8 @@
#define FIRST_LEGACY_IRQ 32
#define SGI_MASK 0xFFFF
static int num_ictlrs;
static void __iomem *ictlr_reg_base[] = {
@ -54,6 +56,19 @@ static void __iomem *ictlr_reg_base[] = {
IO_ADDRESS(TEGRA_QUINARY_ICTLR_BASE),
};
bool tegra_pending_sgi(void)
{
u32 pending_set;
void __iomem *distbase = IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE);
pending_set = readl_relaxed(distbase + GIC_DIST_PENDING_SET);
if (pending_set & SGI_MASK)
return true;
return false;
}
static inline void tegra_irq_write_mask(unsigned int irq, unsigned long reg)
{
void __iomem *base;

22
arch/arm/mach-tegra/irq.h Normal file
View File

@ -0,0 +1,22 @@
/*
* Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __TEGRA_IRQ_H
#define __TEGRA_IRQ_H
bool tegra_pending_sgi(void);
#endif

View File

@ -36,6 +36,7 @@
#include "iomap.h"
#include "reset.h"
#include "flowctrl.h"
#include "fuse.h"
#include "sleep.h"
#define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */
@ -173,6 +174,8 @@ bool tegra_set_cpu_in_lp2(int phy_cpu_id)
if ((phy_cpu_id == 0) && cpumask_equal(cpu_lp2_mask, cpu_online_mask))
last_cpu = true;
else if (tegra_chip_id == TEGRA20 && phy_cpu_id == 1)
tegra20_cpu_set_resettable_soon();
spin_unlock(&tegra_lp2_lock);
return last_cpu;

View File

@ -21,6 +21,8 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/proc-fns.h>
#include <asm/cp15.h>
#include "sleep.h"
#include "flowctrl.h"
@ -55,6 +57,9 @@ ENDPROC(tegra20_hotplug_shutdown)
ENTRY(tegra20_cpu_shutdown)
cmp r0, #0
moveq pc, lr @ must not be called for CPU 0
mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41
mov r12, #CPU_RESETTABLE
str r12, [r1]
cpu_to_halt_reg r1, r0
ldr r3, =TEGRA_FLOW_CTRL_VIRT
@ -75,3 +80,198 @@ ENTRY(tegra20_cpu_shutdown)
mov pc, lr
ENDPROC(tegra20_cpu_shutdown)
#endif
#ifdef CONFIG_PM_SLEEP
/*
* tegra_pen_lock
*
* spinlock implementation with no atomic test-and-set and no coherence
* using Peterson's algorithm on strongly-ordered registers
* used to synchronize a cpu waking up from wfi with entering lp2 on idle
*
* The reference link of Peterson's algorithm:
* http://en.wikipedia.org/wiki/Peterson's_algorithm
*
* SCRATCH37 = r1 = !turn (inverted from Peterson's algorithm)
* on cpu 0:
* r2 = flag[0] (in SCRATCH38)
* r3 = flag[1] (in SCRATCH39)
* on cpu1:
* r2 = flag[1] (in SCRATCH39)
* r3 = flag[0] (in SCRATCH38)
*
* must be called with MMU on
* corrupts r0-r3, r12
*/
ENTRY(tegra_pen_lock)
mov32 r3, TEGRA_PMC_VIRT
cpu_id r0
add r1, r3, #PMC_SCRATCH37
cmp r0, #0
addeq r2, r3, #PMC_SCRATCH38
addeq r3, r3, #PMC_SCRATCH39
addne r2, r3, #PMC_SCRATCH39
addne r3, r3, #PMC_SCRATCH38
mov r12, #1
str r12, [r2] @ flag[cpu] = 1
dsb
str r12, [r1] @ !turn = cpu
1: dsb
ldr r12, [r3]
cmp r12, #1 @ flag[!cpu] == 1?
ldreq r12, [r1]
cmpeq r12, r0 @ !turn == cpu?
beq 1b @ while !turn == cpu && flag[!cpu] == 1
mov pc, lr @ locked
ENDPROC(tegra_pen_lock)
ENTRY(tegra_pen_unlock)
dsb
mov32 r3, TEGRA_PMC_VIRT
cpu_id r0
cmp r0, #0
addeq r2, r3, #PMC_SCRATCH38
addne r2, r3, #PMC_SCRATCH39
mov r12, #0
str r12, [r2]
mov pc, lr
ENDPROC(tegra_pen_unlock)
/*
* tegra20_cpu_clear_resettable(void)
*
* Called to clear the "resettable soon" flag in PMC_SCRATCH41 when
* it is expected that the secondary CPU will be idle soon.
*/
ENTRY(tegra20_cpu_clear_resettable)
mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41
mov r12, #CPU_NOT_RESETTABLE
str r12, [r1]
mov pc, lr
ENDPROC(tegra20_cpu_clear_resettable)
/*
* tegra20_cpu_set_resettable_soon(void)
*
* Called to set the "resettable soon" flag in PMC_SCRATCH41 when
* it is expected that the secondary CPU will be idle soon.
*/
ENTRY(tegra20_cpu_set_resettable_soon)
mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41
mov r12, #CPU_RESETTABLE_SOON
str r12, [r1]
mov pc, lr
ENDPROC(tegra20_cpu_set_resettable_soon)
/*
* tegra20_cpu_is_resettable_soon(void)
*
* Returns true if the "resettable soon" flag in PMC_SCRATCH41 has been
* set because it is expected that the secondary CPU will be idle soon.
*/
ENTRY(tegra20_cpu_is_resettable_soon)
mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41
ldr r12, [r1]
cmp r12, #CPU_RESETTABLE_SOON
moveq r0, #1
movne r0, #0
mov pc, lr
ENDPROC(tegra20_cpu_is_resettable_soon)
/*
* tegra20_sleep_cpu_secondary_finish(unsigned long v2p)
*
* Enters WFI on secondary CPU by exiting coherency.
*/
ENTRY(tegra20_sleep_cpu_secondary_finish)
stmfd sp!, {r4-r11, lr}
mrc p15, 0, r11, c1, c0, 1 @ save actlr before exiting coherency
/* Flush and disable the L1 data cache */
bl tegra_disable_clean_inv_dcache
mov32 r0, TEGRA_PMC_VIRT + PMC_SCRATCH41
mov r3, #CPU_RESETTABLE
str r3, [r0]
bl cpu_do_idle
/*
* cpu may be reset while in wfi, which will return through
* tegra_resume to cpu_resume
* or interrupt may wake wfi, which will return here
* cpu state is unchanged - MMU is on, cache is on, coherency
* is off, and the data cache is off
*
* r11 contains the original actlr
*/
bl tegra_pen_lock
mov32 r3, TEGRA_PMC_VIRT
add r0, r3, #PMC_SCRATCH41
mov r3, #CPU_NOT_RESETTABLE
str r3, [r0]
bl tegra_pen_unlock
/* Re-enable the data cache */
mrc p15, 0, r10, c1, c0, 0
orr r10, r10, #CR_C
mcr p15, 0, r10, c1, c0, 0
isb
mcr p15, 0, r11, c1, c0, 1 @ reenable coherency
/* Invalidate the TLBs & BTAC */
mov r1, #0
mcr p15, 0, r1, c8, c3, 0 @ invalidate shared TLBs
mcr p15, 0, r1, c7, c1, 6 @ invalidate shared BTAC
dsb
isb
/* the cpu was running with coherency disabled,
* caches may be out of date */
bl v7_flush_kern_cache_louis
ldmfd sp!, {r4 - r11, pc}
ENDPROC(tegra20_sleep_cpu_secondary_finish)
/*
* tegra20_tear_down_cpu
*
* Switches the CPU cluster to PLL-P and enters sleep.
*/
ENTRY(tegra20_tear_down_cpu)
bl tegra_switch_cpu_to_pllp
b tegra20_enter_sleep
ENDPROC(tegra20_tear_down_cpu)
/*
* tegra20_enter_sleep
*
* uses flow controller to enter sleep state
* executes from IRAM with SDRAM in selfrefresh when target state is LP0 or LP1
* executes from SDRAM with target state is LP2
*/
tegra20_enter_sleep:
mov32 r6, TEGRA_FLOW_CTRL_BASE
mov r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT
orr r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ
cpu_id r1
cpu_to_halt_reg r1, r1
str r0, [r6, r1]
dsb
ldr r0, [r6, r1] /* memory barrier */
halted:
dsb
wfe /* CPU should be power gated here */
isb
b halted
#endif

View File

@ -34,6 +34,9 @@
#include "flowctrl.h"
#include "sleep.h"
#define CLK_RESET_CCLK_BURST 0x20
#define CLK_RESET_CCLK_DIVIDER 0x24
#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
/*
* tegra_disable_clean_inv_dcache
@ -110,4 +113,20 @@ ENTRY(tegra_shut_off_mmu)
mov pc, r0
ENDPROC(tegra_shut_off_mmu)
.popsection
/*
* tegra_switch_cpu_to_pllp
*
* In LP2 the normal cpu clock pllx will be turned off. Switch the CPU to pllp
*/
ENTRY(tegra_switch_cpu_to_pllp)
/* in LP2 idle (SDRAM active), set the CPU burst policy to PLLP */
mov32 r5, TEGRA_CLK_RESET_BASE
mov r0, #(2 << 28) @ burst policy = run mode
orr r0, r0, #(4 << 4) @ use PLLP in run mode burst
str r0, [r5, #CLK_RESET_CCLK_BURST]
mov r0, #0
str r0, [r5, #CLK_RESET_CCLK_DIVIDER]
mov pc, lr
ENDPROC(tegra_switch_cpu_to_pllp)
#endif

View File

@ -25,6 +25,19 @@
+ IO_PPSB_VIRT)
#define TEGRA_CLK_RESET_VIRT (TEGRA_CLK_RESET_BASE - IO_PPSB_PHYS \
+ IO_PPSB_VIRT)
#define TEGRA_PMC_VIRT (TEGRA_PMC_BASE - IO_APB_PHYS + IO_APB_VIRT)
/* PMC_SCRATCH37-39 and 41 are used for tegra_pen_lock and idle */
#define PMC_SCRATCH37 0x130
#define PMC_SCRATCH38 0x134
#define PMC_SCRATCH39 0x138
#define PMC_SCRATCH41 0x140
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
#define CPU_RESETTABLE 2
#define CPU_RESETTABLE_SOON 1
#define CPU_NOT_RESETTABLE 0
#endif
#ifdef __ASSEMBLY__
/* returns the offset of the flow controller halt register for a cpu */
@ -104,6 +117,8 @@
.endm
#endif /* CONFIG_CACHE_L2X0 */
#else
void tegra_pen_lock(void);
void tegra_pen_unlock(void);
void tegra_resume(void);
int tegra_sleep_cpu_finish(unsigned long);
void tegra_disable_clean_inv_dcache(void);
@ -116,6 +131,17 @@ static inline void tegra20_hotplug_init(void) {}
static inline void tegra30_hotplug_init(void) {}
#endif
void tegra20_cpu_shutdown(int cpu);
int tegra20_cpu_is_resettable_soon(void);
void tegra20_cpu_clear_resettable(void);
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
void tegra20_cpu_set_resettable_soon(void);
#else
static inline void tegra20_cpu_set_resettable_soon(void) {}
#endif
int tegra20_sleep_cpu_secondary_finish(unsigned long);
void tegra20_tear_down_cpu(void);
int tegra30_sleep_cpu_secondary_finish(unsigned long);
void tegra30_tear_down_cpu(void);

View File

@ -21,6 +21,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/clk/tegra.h>
#include <linux/delay.h>
#include "clk.h"
@ -104,6 +105,13 @@
#define SUPER_SCLK_DIVIDER 0x2c
#define CLK_SYSTEM_RATE 0x30
#define CCLK_BURST_POLICY_SHIFT 28
#define CCLK_RUN_POLICY_SHIFT 4
#define CCLK_IDLE_POLICY_SHIFT 0
#define CCLK_IDLE_POLICY 1
#define CCLK_RUN_POLICY 2
#define CCLK_BURST_POLICY_PLLX 8
#define CLK_SOURCE_I2S1 0x100
#define CLK_SOURCE_I2S2 0x104
#define CLK_SOURCE_SPDIF_OUT 0x108
@ -169,6 +177,17 @@
#define CPU_CLOCK(cpu) (0x1 << (8 + cpu))
#define CPU_RESET(cpu) (0x1111ul << (cpu))
#ifdef CONFIG_PM_SLEEP
static struct cpu_clk_suspend_context {
u32 pllx_misc;
u32 pllx_base;
u32 cpu_burst;
u32 clk_csite_src;
u32 cclk_divider;
} tegra20_cpu_clk_sctx;
#endif
static int periph_clk_enb_refcnt[CLK_OUT_ENB_NUM * 32];
static void __iomem *clk_base;
@ -1136,12 +1155,86 @@ static void tegra20_disable_cpu_clock(u32 cpu)
clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
}
#ifdef CONFIG_PM_SLEEP
static bool tegra20_cpu_rail_off_ready(void)
{
unsigned int cpu_rst_status;
cpu_rst_status = readl(clk_base +
TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET);
return !!(cpu_rst_status & 0x2);
}
static void tegra20_cpu_clock_suspend(void)
{
/* switch coresite to clk_m, save off original source */
tegra20_cpu_clk_sctx.clk_csite_src =
readl(clk_base + CLK_SOURCE_CSITE);
writel(3<<30, clk_base + CLK_SOURCE_CSITE);
tegra20_cpu_clk_sctx.cpu_burst =
readl(clk_base + CCLK_BURST_POLICY);
tegra20_cpu_clk_sctx.pllx_base =
readl(clk_base + PLLX_BASE);
tegra20_cpu_clk_sctx.pllx_misc =
readl(clk_base + PLLX_MISC);
tegra20_cpu_clk_sctx.cclk_divider =
readl(clk_base + SUPER_CCLK_DIVIDER);
}
static void tegra20_cpu_clock_resume(void)
{
unsigned int reg, policy;
/* Is CPU complex already running on PLLX? */
reg = readl(clk_base + CCLK_BURST_POLICY);
policy = (reg >> CCLK_BURST_POLICY_SHIFT) & 0xF;
if (policy == CCLK_IDLE_POLICY)
reg = (reg >> CCLK_IDLE_POLICY_SHIFT) & 0xF;
else if (policy == CCLK_RUN_POLICY)
reg = (reg >> CCLK_RUN_POLICY_SHIFT) & 0xF;
else
BUG();
if (reg != CCLK_BURST_POLICY_PLLX) {
/* restore PLLX settings if CPU is on different PLL */
writel(tegra20_cpu_clk_sctx.pllx_misc,
clk_base + PLLX_MISC);
writel(tegra20_cpu_clk_sctx.pllx_base,
clk_base + PLLX_BASE);
/* wait for PLL stabilization if PLLX was enabled */
if (tegra20_cpu_clk_sctx.pllx_base & (1 << 30))
udelay(300);
}
/*
* Restore original burst policy setting for calls resulting from CPU
* LP2 in idle or system suspend.
*/
writel(tegra20_cpu_clk_sctx.cclk_divider,
clk_base + SUPER_CCLK_DIVIDER);
writel(tegra20_cpu_clk_sctx.cpu_burst,
clk_base + CCLK_BURST_POLICY);
writel(tegra20_cpu_clk_sctx.clk_csite_src,
clk_base + CLK_SOURCE_CSITE);
}
#endif
static struct tegra_cpu_car_ops tegra20_cpu_car_ops = {
.wait_for_reset = tegra20_wait_cpu_in_reset,
.put_in_reset = tegra20_put_cpu_in_reset,
.out_of_reset = tegra20_cpu_out_of_reset,
.enable_clock = tegra20_enable_cpu_clock,
.disable_clock = tegra20_disable_cpu_clock,
#ifdef CONFIG_PM_SLEEP
.rail_off_ready = tegra20_cpu_rail_off_ready,
.suspend = tegra20_cpu_clock_suspend,
.resume = tegra20_cpu_clock_resume,
#endif
};
static __initdata struct tegra_clk_init_table init_table[] = {