regulator: max77686: Pass descriptor instead of GPIO number

Instead of passing a global GPIO number, pass a descriptor looked
up from the device tree configuration node.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Linus Walleij 2018-05-14 10:06:26 +02:00 committed by Mark Brown
parent e1739e86f0
commit c89c00e2b8
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0

View File

@ -25,8 +25,7 @@
#include <linux/kernel.h>
#include <linux/bug.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
@ -90,6 +89,7 @@ enum max77686_ramp_rate {
};
struct max77686_data {
struct device *dev;
DECLARE_BITMAP(gpio_enabled, MAX77686_REGULATORS);
/* Array indexed by regulator id */
@ -269,16 +269,20 @@ static int max77686_of_parse_cb(struct device_node *np,
case MAX77686_BUCK8:
case MAX77686_BUCK9:
case MAX77686_LDO20 ... MAX77686_LDO22:
config->ena_gpio = of_get_named_gpio(np,
"maxim,ena-gpios", 0);
config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
config->ena_gpio_initialized = true;
config->ena_gpiod = devm_gpiod_get_from_of_node(max77686->dev,
np,
"maxim,ena",
0,
GPIOD_OUT_HIGH,
"max77686-regulator");
if (IS_ERR(config->ena_gpiod))
config->ena_gpiod = NULL;
break;
default:
return 0;
}
if (gpio_is_valid(config->ena_gpio)) {
if (config->ena_gpiod) {
set_bit(desc->id, max77686->gpio_enabled);
return regmap_update_bits(config->regmap, desc->enable_reg,
@ -521,6 +525,7 @@ static int max77686_pmic_probe(struct platform_device *pdev)
if (!max77686)
return -ENOMEM;
max77686->dev = &pdev->dev;
config.dev = iodev->dev;
config.regmap = iodev->regmap;
config.driver_data = max77686;