AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-24 15:11:00 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

Kconfig: Remove useless "default N" lines

Browse Source 
A number of Kconfig entries default to (uppercase) "N". It was clearly
intended to use "default n". But since (lowercase) "n" is the default
anyway, these lines might as well be removed.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Paul Bolle 2014-02-11 13:38:47 +01:00 committed by Jiri Kosina
parent 392b21897d
commit c7dcec7dd4
15 changed files with 0 additions and 26 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arc/Kconfig
View File

@ -356,7 +356,6 @@ config ARC_CURR_IN_REG
config ARC_MISALIGN_ACCESS
bool "Emulate unaligned memory access (userspace only)"
default N
select SYSCTL_ARCH_UNALIGN_NO_WARN
select SYSCTL_ARCH_UNALIGN_ALLOW
help

2
arch/cris/arch-v32/drivers/Kconfig
View File

@ -11,7 +11,6 @@ config ETRAX_ETHERNET
config ETRAX_NO_PHY
bool "PHY not present"
depends on ETRAX_ETHERNET
default N
help
This option disables all MDIO communication with an ethernet
transceiver connected to the MII interface. This option shall
@ -116,7 +115,6 @@ config ETRAX_AXISFLASHMAP
config ETRAX_AXISFLASHMAP_MTD0WHOLE
bool "MTD0 is whole boot flash device"
depends on ETRAX_AXISFLASHMAP
default N
help
When this option is not set, mtd0 refers to the first partition
on the boot flash device. When set, mtd0 refers to the whole

2
drivers/misc/mic/Kconfig
View File

@ -4,7 +4,6 @@ config INTEL_MIC_HOST
tristate "Intel MIC Host Driver"
depends on 64BIT && PCI && X86
select VHOST_RING
default N
help
This enables Host Driver support for the Intel Many Integrated
Core (MIC) family of PCIe form factor coprocessor devices that
@ -25,7 +24,6 @@ config INTEL_MIC_CARD
tristate "Intel MIC Card Driver"
depends on 64BIT && X86
select VIRTIO
default N
help
This enables card driver support for the Intel Many Integrated
Core (MIC) device family. The card driver communicates shutdown/

2
drivers/staging/android/Kconfig
View File

@ -2,7 +2,6 @@ menu "Android"
config ANDROID
bool "Android Drivers"
default N
---help---
Enable support for various drivers needed on the Android platform
@ -60,7 +59,6 @@ config ANDROID_TIMED_GPIO
config ANDROID_LOW_MEMORY_KILLER
bool "Android Low Memory Killer"
default N
---help---
Registers processes to be killed when memory is low

1
drivers/staging/bcm/Kconfig
View File

@ -1,7 +1,6 @@
config BCM_WIMAX
tristate "Beceem BCS200/BCS220-3 and BCSM250 wimax support"
depends on USB && NET
default N
help
This is an experimental driver for the Beceem WIMAX chipset used
by Sprint 4G.

1
drivers/staging/frontier/Kconfig
View File

@ -1,6 +1,5 @@
config TRANZPORT
tristate "Frontier Tranzport and Alphatrack support"
depends on USB
default N
---help---
Enable support for the Frontier Tranzport and Alphatrack devices.

3
drivers/staging/media/go7007/Kconfig
View File

@ -13,7 +13,6 @@ config VIDEO_GO7007
select VIDEO_TW9906 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_UDA1342 if MEDIA_SUBDRV_AUTOSELECT
default N
---help---
This is a video4linux driver for the WIS GO7007 MPEG
encoder chip.
@ -24,7 +23,6 @@ config VIDEO_GO7007
config VIDEO_GO7007_USB
tristate "WIS GO7007 USB support"
depends on VIDEO_GO7007 && USB
default N
---help---
This is a video4linux driver for the WIS GO7007 MPEG
encoder chip over USB.
@ -46,7 +44,6 @@ config VIDEO_GO7007_LOADER
config VIDEO_GO7007_USB_S2250_BOARD
tristate "Sensoray 2250/2251 support"
depends on VIDEO_GO7007_USB && USB
default N
---help---
This is a video4linux driver for the Sensoray 2250/2251 device.

1
drivers/staging/rtl8187se/Kconfig
View File

@ -6,6 +6,5 @@ config R8187SE
select WEXT_PRIV
select EEPROM_93CX6
select CRYPTO
default N
---help---
If built as a module, it will be called r8187se.ko.

1
drivers/staging/rtl8188eu/Kconfig
View File

@ -3,7 +3,6 @@ config R8188EU
depends on WLAN && USB
select WIRELESS_EXT
select WEXT_PRIV
default N
---help---
This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N.
If built as a module, it will be called r8188eu.

1
drivers/staging/rtl8192e/rtl8192e/Kconfig
View File

@ -5,5 +5,4 @@ config RTL8192E
select WIRELESS_EXT
select WEXT_PRIV
select CRYPTO
default N
---help---

1
drivers/staging/rtl8192u/Kconfig
View File

@ -5,5 +5,4 @@ config RTL8192U
select WIRELESS_EXT
select WEXT_PRIV
select CRYPTO
default N
---help---

2
drivers/staging/rtl8712/Kconfig
View File

@ -4,7 +4,6 @@ config R8712U
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
default N
---help---
This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130.
If built as a module, it will be called r8712u.
@ -12,7 +11,6 @@ config R8712U
config R8712_TX_AGGR
bool "Realtek RTL8712U Transmit Aggregation code"
depends on R8712U && BROKEN
default N
---help---
This option provides transmit aggregation for the Realtek RTL8712 USB device.

4
drivers/staging/usbip/Kconfig
View File

@ -1,7 +1,6 @@
config USBIP_CORE
tristate "USB/IP support"
depends on USB && NET
default N
---help---
This enables pushing USB packets over IP to allow remote
machines direct access to USB devices. It provides the
@ -18,7 +17,6 @@ config USBIP_CORE
config USBIP_VHCI_HCD
tristate "VHCI hcd"
depends on USBIP_CORE
default N
---help---
This enables the USB/IP virtual host controller driver,
which is run on the remote machine.
@ -29,7 +27,6 @@ config USBIP_VHCI_HCD
config USBIP_HOST
tristate "Host driver"
depends on USBIP_CORE
default N
---help---
This enables the USB/IP host driver, which is run on the
machine that is sharing the USB devices.
@ -40,6 +37,5 @@ config USBIP_HOST
config USBIP_DEBUG
bool "Debug messages for USB/IP"
depends on USBIP_CORE
default N
---help---
This enables the debug messages from the USB/IP drivers.

1
drivers/usb/core/Kconfig
View File

@ -10,7 +10,6 @@ config USB_DEBUG
config USB_ANNOUNCE_NEW_DEVICES
bool "USB announce new devices"
default N
help
Say Y here if you want the USB core to always announce the
idVendor, idProduct, Manufacturer, Product, and SerialNumber

3
drivers/usb/host/Kconfig
View File

@ -314,7 +314,6 @@ config USB_ISP1760_HCD
config USB_ISP1362_HCD
tristate "ISP1362 HCD support"
default N
---help---
Supports the Philips ISP1362 chip as a host controller
@ -326,7 +325,6 @@ config USB_ISP1362_HCD
config USB_FUSBH200_HCD
tristate "FUSBH200 HCD support"
depends on USB
default N
---help---
Faraday FUSBH200 is designed to meet USB2.0 EHCI specification
with minor modification.
@ -337,7 +335,6 @@ config USB_FUSBH200_HCD
config USB_FOTG210_HCD
tristate "FOTG210 HCD support"
depends on USB
default N
---help---
Faraday FOTG210 is an OTG controller which can be configured as
an USB2.0 host. It is designed to meet USB2.0 EHCI specification