AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2025-02-10 12:05:21 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

Qualcomm ARM64 DT updates for v5.9

Browse Source 
For SM8250 this adds the main pinctrl/gpio block (TLMM), I2C and SPI
 controllers, the CPU subsytem watchdog, inter-processor signalling
 controller (IPCC), always-on power/clock controller (AOSS),
 inter-processor state machine (SMP2P), defines remoteproc controls
 for audio, compute and sensor processors and base definition for the
 PM8009 PMIC. It also does fix up a few minor issues from the initial
 merge of the platform support.
 
 SC7180 and SDM845 gains interconnect paths and performance tables
 defined for display, QUP, QSPI, SDHC and CPUs.
 
 SC7180 gains WiFi support and some cleanups related to the modem
 remoteproc.
 
 SDM845 gains inline crypto engine support for UFS, LAB/IBB
 regulators for powering display panels, remoteproc relocation debug
 support
 
 SM8150 gains USB controller support and the two related PHYs, as well as
 thermal zones and throttling support.
 
 IPQ8074 gains USB and SDHCI support.
 
 MSM8916 is being cleaned up, gains interconnect providers and Samsung
 A2015 gains accelerometer and magnetometer support.
 
 MSM8994 gains PSCI, SDHCI, SPMI support, I2C, SPI, UART gains DMA
 support and the DTS files are cleaned up.
 
 The SDM630 platform DTS is at last merged and initial support for Sony
 Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra is added.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl8WUsEbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3Fzt4P/20klQxW+k8o2GujUM59
 pKvujN4d/IR8sXWCMhdVESYjvWX+L0dxmNXnCJO/JLIsvDqNemG+q2beJ01j6s+Z
 HZJMj1WI1yJ1jYUemsxKZqF7BIoDPsr1miH8g7bMw/ykPqUCH2vD5iH21fnpT9/S
 +VCi3fUUKy6Z0xEqwe16g8zXiEN7vbf6CSEhw8FBiMWel+VD7eIFtseXU0ROoCPB
 KbXTYe9kSsxfLbimDuf8ZUxWRTljLOh1sN9h6mLDqx3f4af0ehU+R3/6oenzm1Xq
 24beWYq0l83TIxPhXwkXxyDkuogO8jo1Uaoim0MovXFWh+SVmSGiU0qbeSdVNI6W
 F8oiRKyhIIdaOYpeZz3Hd6sgA/DZjSDknDw/GeceRW4/aNYyLHMYKtc9f1nmZuqt
 TaK3Uou5OTA+zKRqeY8XwgaKx9Z+Y+w2BgS+naD8wcpVGo7lJFrkvczv6wz78fTk
 5L2XtpGS/pHEcK5RVc0nZ9VZMsnejiJMRmy3BvyR5Sb1oWpPRrvKyvPjD877Ia3r
 91TbaILHMeM6fn5cf9raX39VhRykX1/OB/rL/K63gVIaKB4YmaJD5Ix1nnzkRQuK
 qrO2BwTcU4DdwCyJXICk40NZYUiEHxTobJqNFyj4DX8lTxCCFhhgkk/c1j+5HxUc
 UvmJfJZe/9FAjW2CwYKxjfcy
 =i4yf
 -----END PGP SIGNATURE-----

Merge tag 'qcom-arm64-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 DT updates for v5.9

For SM8250 this adds the main pinctrl/gpio block (TLMM), I2C and SPI
controllers, the CPU subsytem watchdog, inter-processor signalling
controller (IPCC), always-on power/clock controller (AOSS),
inter-processor state machine (SMP2P), defines remoteproc controls
for audio, compute and sensor processors and base definition for the
PM8009 PMIC. It also does fix up a few minor issues from the initial
merge of the platform support.

SC7180 and SDM845 gains interconnect paths and performance tables
defined for display, QUP, QSPI, SDHC and CPUs.

SC7180 gains WiFi support and some cleanups related to the modem
remoteproc.

SDM845 gains inline crypto engine support for UFS, LAB/IBB
regulators for powering display panels, remoteproc relocation debug
support

SM8150 gains USB controller support and the two related PHYs, as well as
thermal zones and throttling support.

IPQ8074 gains USB and SDHCI support.

MSM8916 is being cleaned up, gains interconnect providers and Samsung
A2015 gains accelerometer and magnetometer support.

MSM8994 gains PSCI, SDHCI, SPMI support, I2C, SPI, UART gains DMA
support and the DTS files are cleaned up.

The SDM630 platform DTS is at last merged and initial support for Sony
Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra is added.

* tag 'qcom-arm64-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (66 commits)
  arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators
  arm64: dts: sc7180: Add DSI and MDP OPP tables and power-domains
  arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domains
  arm64: dts: qcom: sc7180: Move the fixed-perm property to SoC dtsi
  arm64: dts: qcom: msm8916-samsung-a2015: Add accelerometer/magnetometer
  arm64: dts: qcom: msm8916: Use higher I2C drive-strength only on DB410c
  arm64: dts: qcom: msm8916: Simplify pinctrl configuration
  arm64: dts: msm8916-samsung/longcheer: Move pinctrl/regulators to end of file
  arm64: dts: qcom: sm8250: Drop tcsr_mutex syscon
  arm64: dts: qcom: sc7180: Add missing properties for Wifi node
  arm64: dts: qcom: Fix WiFi supplies on sc7180-idp
  arm64: dts: sdm845: add Inline Crypto Engine registers and clock
  arm64: dts: sc7180: Add sdhc opps and power-domains
  arm64: dts: sdm845: Add sdhc opps and power-domains
  arm64: dts: sc7180: Add OPP table for all qup devices
  arm64: dts: sdm845: Add OPP table for all qup devices
  arm64: dts: sc7180: Add qspi opps and power-domains
  arm64: dts: sdm845: Add qspi opps and power-domains
  arm64: dts: qcom: sdm845: Add cpu OPP tables
  arm64: dts: qcom: sc7180: Drop the unused non-MSA SID
  ...

Link: https://lore.kernel.org/r/20200721044934.3430084-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2020-07-22 21:55:45 +02:00
commit c6e2e454ba
41 changed files with 6491 additions and 1076 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
View File

@ -40,6 +40,8 @@ properties:
- qcom,msm8998-tsens
- qcom,sc7180-tsens
- qcom,sdm845-tsens
- qcom,sm8150-tsens
- qcom,sm8250-tsens
- const: qcom,tsens-v2
reg:

5
arch/arm64/boot/dts/qcom/Makefile
View File

@ -16,6 +16,11 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb

258
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
View File

@ -453,22 +453,23 @@ capture - Quat MI2S
*/
sound: sound {
compatible = "qcom,apq8016-sbc-sndcard";
reg = <0x07702000 0x4>, <0x07702004 0x4>;
reg-names = "mic-iomux", "spkr-iomux";
sound: sound {
compatible = "qcom,apq8016-sbc-sndcard";
reg = <0x07702000 0x4>, <0x07702004 0x4>;
reg-names = "mic-iomux", "spkr-iomux";
status = "okay";
pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
pinctrl-names = "default", "sleep";
qcom,model = "DB410c";
qcom,audio-routing =
"AMIC2", "MIC BIAS Internal2",
"AMIC3", "MIC BIAS External1";
status = "okay";
pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
pinctrl-names = "default", "sleep";
qcom,model = "DB410c";
qcom,audio-routing =
"AMIC2", "MIC BIAS Internal2",
"AMIC3", "MIC BIAS External1";
external-dai-link@0 {
link-name = "ADV7533";
cpu { /* QUAT */
cpu {
sound-dai = <&lpass MI2S_QUATERNARY>;
};
codec {
@ -476,26 +477,26 @@ codec {
};
};
internal-codec-playback-dai-link@0 { /* I2S - Internal codec */
link-name = "WCD";
cpu { /* PRIMARY */
sound-dai = <&lpass MI2S_PRIMARY>;
};
codec {
sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
};
};
internal-codec-playback-dai-link@0 {
link-name = "WCD";
cpu {
sound-dai = <&lpass MI2S_PRIMARY>;
};
codec {
sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
};
};
internal-codec-capture-dai-link@0 { /* I2S - Internal codec */
link-name = "WCD-Capture";
cpu { /* PRIMARY */
sound-dai = <&lpass MI2S_TERTIARY>;
};
codec {
sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
};
};
};
internal-codec-capture-dai-link@0 {
link-name = "WCD-Capture";
cpu {
sound-dai = <&lpass MI2S_TERTIARY>;
};
codec {
sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
};
};
};
spmi@200f000 {
pm8916@0 {
@ -650,9 +651,9 @@ resin {
};
&wcd_codec {
status = "okay";
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
clock-names = "mclk";
status = "okay";
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
clock-names = "mclk";
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
};
@ -778,135 +779,120 @@ l18 {
};
};
/*
* 2mA drive strength is not enough when connecting multiple
* I2C devices with different pull up resistors.
*/
&i2c2_default {
drive-strength = <16>;
};
&i2c4_default {
drive-strength = <16>;
};
&i2c6_default {
drive-strength = <16>;
};
&msmgpio {
msmgpio_leds: msmgpio-leds {
pinconf {
pins = "gpio21", "gpio120";
function = "gpio";
output-low;
};
pins = "gpio21", "gpio120";
function = "gpio";
output-low;
};
usb_id_default: usb-id-default {
pinmux {
function = "gpio";
pins = "gpio121";
};
pins = "gpio121";
function = "gpio";
pinconf {
pins = "gpio121";
drive-strength = <8>;
input-enable;
bias-pull-up;
};
drive-strength = <8>;
input-enable;
bias-pull-up;
};
adv7533_int_active: adv533-int-active {
pinmux {
function = "gpio";
pins = "gpio31";
};
pinconf {
pins = "gpio31";
drive-strength = <16>;
bias-disable;
};
pins = "gpio31";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
adv7533_int_suspend: adv7533-int-suspend {
pinmux {
function = "gpio";
pins = "gpio31";
};
pinconf {
pins = "gpio31";
drive-strength = <2>;
bias-disable;
};
pins = "gpio31";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
adv7533_switch_active: adv7533-switch-active {
pinmux {
function = "gpio";
pins = "gpio32";
};
pinconf {
pins = "gpio32";
drive-strength = <16>;
bias-disable;
};
pins = "gpio32";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
adv7533_switch_suspend: adv7533-switch-suspend {
pinmux {
function = "gpio";
pins = "gpio32";
};
pinconf {
pins = "gpio32";
drive-strength = <2>;
bias-disable;
};
pins = "gpio32";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
msm_key_volp_n_default: msm-key-volp-n-default {
pinmux {
function = "gpio";
pins = "gpio107";
};
pinconf {
pins = "gpio107";
drive-strength = <8>;
input-enable;
bias-pull-up;
};
pins = "gpio107";
function = "gpio";
drive-strength = <8>;
input-enable;
bias-pull-up;
};
};
&pm8916_gpios {
usb_hub_reset_pm: usb-hub-reset-pm {
pinconf {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
input-disable;
output-high;
};
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
input-disable;
output-high;
};
usb_hub_reset_pm_device: usb-hub-reset-pm-device {
pinconf {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
usb_sw_sel_pm: usb-sw-sel-pm {
pinconf {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <PM8916_GPIO_VPH>;
input-disable;
output-high;
};
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <PM8916_GPIO_VPH>;
input-disable;
output-high;
};
usb_sw_sel_pm_device: usb-sw-sel-pm-device {
pinconf {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <PM8916_GPIO_VPH>;
input-disable;
output-low;
};
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <PM8916_GPIO_VPH>;
input-disable;
output-low;
};
pm8916_gpios_leds: pm8916-gpios-leds {
pinconf {
pins = "gpio1", "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
pins = "gpio1", "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
};
@ -915,19 +901,17 @@ &pm8916_mpps {
pinctrl-0 = <&ls_exp_gpio_f>;
ls_exp_gpio_f: pm8916-mpp4 {
pinconf {
pins = "mpp4";
function = "digital";
output-low;
power-source = <PM8916_MPP_L5>; // 1.8V
};
pins = "mpp4";
function = "digital";
output-low;
power-source = <PM8916_MPP_L5>; // 1.8V
};
pm8916_mpps_leds: pm8916-mpps-leds {
pinconf {
pins = "mpp2", "mpp3";
function = "digital";
output-low;
};
pins = "mpp2", "mpp3";
function = "digital";
output-low;
};
};

28
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
View File

@ -82,3 +82,31 @@ nand@0 {
nand-bus-width = <8>;
};
};
&sdhc_1 {
status = "ok";
};
&qusb_phy_0 {
status = "ok";
};
&qusb_phy_1 {
status = "ok";
};
&ssphy_0 {
status = "ok";
};
&ssphy_1 {
status = "ok";
};
&usb_0 {
status = "ok";
};
&usb_1 {
status = "ok";
};

189
arch/arm64/boot/dts/qcom/ipq8074.dtsi
View File

@ -82,6 +82,91 @@ soc: soc {
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
ssphy_1: phy@58000 {
compatible = "qcom,ipq8074-qmp-usb3-phy";
reg = <0x00058000 0x1c4>;
#clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_USB1_AUX_CLK>,
<&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
<&xo>;
clock-names = "aux", "cfg_ahb", "ref";
resets = <&gcc GCC_USB1_PHY_BCR>,
<&gcc GCC_USB3PHY_1_PHY_BCR>;
reset-names = "phy","common";
status = "disabled";
usb1_ssphy: lane@58200 {
reg = <0x00058200 0x130>, /* Tx */
<0x00058400 0x200>, /* Rx */
<0x00058800 0x1f8>, /* PCS */
<0x00058600 0x044>; /* PCS misc*/
#phy-cells = <0>;
clocks = <&gcc GCC_USB1_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "gcc_usb1_pipe_clk_src";
};
};
qusb_phy_1: phy@59000 {
compatible = "qcom,ipq8074-qusb2-phy";
reg = <0x00059000 0x180>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
<&xo>;
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
status = "disabled";
};
ssphy_0: phy@78000 {
compatible = "qcom,ipq8074-qmp-usb3-phy";
reg = <0x00078000 0x1c4>;
#clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_USB0_AUX_CLK>,
<&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
<&xo>;
clock-names = "aux", "cfg_ahb", "ref";
resets = <&gcc GCC_USB0_PHY_BCR>,
<&gcc GCC_USB3PHY_0_PHY_BCR>;
reset-names = "phy","common";
status = "disabled";
usb0_ssphy: lane@78200 {
reg = <0x00078200 0x130>, /* Tx */
<0x00078400 0x200>, /* Rx */
<0x00078800 0x1f8>, /* PCS */
<0x00078600 0x044>; /* PCS misc*/
#phy-cells = <0>;
clocks = <&gcc GCC_USB0_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "gcc_usb0_pipe_clk_src";
};
};
qusb_phy_0: phy@79000 {
compatible = "qcom,ipq8074-qusb2-phy";
reg = <0x00079000 0x180>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
<&xo>;
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
};
pcie_phy0: phy@86000 {
compatible = "qcom,ipq8074-qmp-pcie-phy";
reg = <0x00086000 0x1000>;
@ -169,6 +254,28 @@ gcc: gcc@1800000 {
#reset-cells = <0x1>;
};
sdhc_1: sdhci@7824900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x7824900 0x500>, <0x7824000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&xo>,
<&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>;
clock-names = "xo", "iface", "core";
max-frequency = <384000000>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
bus-width = <8>;
status = "disabled";
};
blsp_dma: dma@7884000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07884000 0x2b000>;
@ -294,6 +401,88 @@ qpic_nand: nand@79b0000 {
status = "disabled";
};
usb_0: usb@8af8800 {
compatible = "qcom,dwc3";
reg = <0x08af8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
<&gcc GCC_USB0_MASTER_CLK>,
<&gcc GCC_USB0_SLEEP_CLK>,
<&gcc GCC_USB0_MOCK_UTMI_CLK>;
clock-names = "sys_noc_axi",
"master",
"sleep",
"mock_utmi";
assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
<&gcc GCC_USB0_MASTER_CLK>,
<&gcc GCC_USB0_MOCK_UTMI_CLK>;
assigned-clock-rates = <133330000>,
<133330000>,
<19200000>;
resets = <&gcc GCC_USB0_BCR>;
status = "disabled";
dwc_0: dwc3@8a00000 {
compatible = "snps,dwc3";
reg = <0x8a00000 0xcd00>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
phys = <&qusb_phy_0>, <&usb0_ssphy>;
phy-names = "usb2-phy", "usb3-phy";
tx-fifo-resize;
snps,is-utmi-l1-suspend;
snps,hird-threshold = /bits/ 8 <0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_u3_susphy_quirk;
dr_mode = "host";
};
};
usb_1: usb@8cf8800 {
compatible = "qcom,dwc3";
reg = <0x08cf8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
<&gcc GCC_USB1_MASTER_CLK>,
<&gcc GCC_USB1_SLEEP_CLK>,
<&gcc GCC_USB1_MOCK_UTMI_CLK>;
clock-names = "sys_noc_axi",
"master",
"sleep",
"mock_utmi";
assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
<&gcc GCC_USB1_MASTER_CLK>,
<&gcc GCC_USB1_MOCK_UTMI_CLK>;
assigned-clock-rates = <133330000>,
<133330000>,
<19200000>;
resets = <&gcc GCC_USB1_BCR>;
status = "disabled";
dwc_1: dwc3@8c00000 {
compatible = "snps,dwc3";
reg = <0x8c00000 0xcd00>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
phys = <&qusb_phy_1>, <&usb1_ssphy>;
phy-names = "usb2-phy", "usb3-phy";
tx-fifo-resize;
snps,is-utmi-l1-suspend;
snps,hird-threshold = /bits/ 8 <0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_u3_susphy_quirk;
dr_mode = "host";
};
};
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;

42
arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
View File

@ -108,31 +108,6 @@ volume-up {
};
};
&msmgpio {
gpio_keys_default: gpio-keys-default {
pinmux {
function = "gpio";
pins = "gpio107";
};
pinconf {
pins = "gpio107";
drive-strength = <2>;
bias-pull-up;
};
};
usb_vbus_default: usb-vbus-default {
pinmux {
function = "gpio";
pins = "gpio62";
};
pinconf {
pins = "gpio62";
bias-pull-up;
};
};
};
&spmi_bus {
pm8916@0 {
pon@800 {
@ -258,3 +233,20 @@ l18 {
regulator-max-microvolt = <2700000>;
};
};
&msmgpio {
gpio_keys_default: gpio-keys-default {
pins = "gpio107";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
usb_vbus_default: usb-vbus-default {
pins = "gpio62";
function = "gpio";
bias-pull-up;
};
};

861
arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
View File

File diff suppressed because it is too large Load Diff

154
arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
View File

@ -167,77 +167,33 @@ muic: sm5502@25 {
};
};
&msmgpio {
gpio_keys_default: gpio-keys-default {
pinmux {
function = "gpio";
pins = "gpio107", "gpio109";
};
pinconf {
pins = "gpio107", "gpio109";
drive-strength = <2>;
bias-pull-up;
};
&blsp_i2c2 {
status = "okay";
accelerometer: accelerometer@10 {
compatible = "bosch,bmc150_accel";
reg = <0x10>;
interrupt-parent = <&msmgpio>;
interrupts = <115 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&accel_int_default>;
};
gpio_hall_sensor_default: gpio-hall-sensor-default {
pinmux {
function = "gpio";
pins = "gpio52";
};
pinconf {
pins = "gpio52";
drive-strength = <2>;
bias-disable;
};
magnetometer@12 {
compatible = "bosch,bmc150_magn";
reg = <0x12>;
};
};
muic_int_default: muic-int-default {
pinmux {
function = "gpio";
pins = "gpio12";
};
pinconf {
pins = "gpio12";
drive-strength = <2>;
bias-disable;
};
};
tsp_en_default: tsp-en-default {
pinmux {
function = "gpio";
pins = "gpio73";
};
pinconf {
pins = "gpio73";
drive-strength = <2>;
bias-disable;
};
};
pmx-mdss {
mdss_default: mdss-default {
pinmux {
function = "gpio";
pins = "gpio25";
};
pinconf {
pins = "gpio25";
drive-strength = <8>;
bias-disable;
};
};
mdss_sleep: mdss-sleep {
pinmux {
function = "gpio";
pins = "gpio25";
};
pinconf {
pins = "gpio25";
drive-strength = <2>;
bias-pull-down;
&spmi_bus {
pm8916@0 {
pon@800 {
volume-down {
compatible = "qcom,pm8941-resin";
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
bias-pull-up;
linux,code = <KEY_VOLUMEDOWN>;
};
};
};
@ -356,15 +312,61 @@ l18 {
};
};
&spmi_bus {
pm8916@0 {
pon@800 {
volume-down {
compatible = "qcom,pm8941-resin";
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
bias-pull-up;
linux,code = <KEY_VOLUMEDOWN>;
};
&msmgpio {
accel_int_default: accel-int-default {
pins = "gpio115";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
gpio_keys_default: gpio-keys-default {
pins = "gpio107", "gpio109";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
gpio_hall_sensor_default: gpio-hall-sensor-default {
pins = "gpio52";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
mdss {
mdss_default: mdss-default {
pins = "gpio25";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
mdss_sleep: mdss-sleep {
pins = "gpio25";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
muic_int_default: muic-int-default {
pins = "gpio12";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
tsp_en_default: tsp-en-default {
pins = "gpio73";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};

20
arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
View File

@ -22,6 +22,12 @@ reg_panel_vdd3: regulator-panel-vdd3 {
};
};
&accelerometer {
mount-matrix = "0", "1", "0",
"1", "0", "0",
"0", "0", "1";
};
&dsi0 {
panel@0 {
reg = <0>;
@ -51,14 +57,10 @@ dsi0_out: endpoint {
&msmgpio {
panel_vdd3_default: panel-vdd3-default {
pinmux {
function = "gpio";
pins = "gpio9";
};
pinconf {
pins = "gpio9";
drive-strength = <2>;
bias-disable;
};
pins = "gpio9";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};

20
arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
View File

@ -9,6 +9,12 @@ / {
compatible = "samsung,a5u-eur", "qcom,msm8916";
};
&accelerometer {
mount-matrix = "-1", "0", "0",
"0", "1", "0",
"0", "0", "1";
};
&blsp_i2c5 {
status = "okay";
@ -38,14 +44,10 @@ iris {
&msmgpio {
ts_int_default: ts-int-default {
pinmux {
function = "gpio";
pins = "gpio13";
};
pinconf {
pins = "gpio13";
drive-strength = <2>;
bias-disable;
};
pins = "gpio13";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};

31
arch/arm64/boot/dts/qcom/msm8916.dtsi
View File

@ -4,6 +4,7 @@
*/
#include <dt-bindings/arm/coresight-cti-dt.h>
#include <dt-bindings/interconnect/qcom,msm8916.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8916.h>
#include <dt-bindings/reset/qcom,gcc-msm8916.h>
@ -406,11 +407,38 @@ soc: soc {
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
bimc: interconnect@400000 {
compatible = "qcom,msm8916-bimc";
reg = <0x00400000 0x62000>;
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
<&rpmcc RPM_SMD_BIMC_A_CLK>;
};
restart@4ab000 {
compatible = "qcom,pshold";
reg = <0x4ab000 0x4>;
};
pcnoc: interconnect@500000 {
compatible = "qcom,msm8916-pcnoc";
reg = <0x00500000 0x11000>;
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
<&rpmcc RPM_SMD_PCNOC_A_CLK>;
};
snoc: interconnect@580000 {
compatible = "qcom,msm8916-snoc";
reg = <0x00580000 0x14000>;
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
<&rpmcc RPM_SMD_SNOC_A_CLK>;
};
msmgpio: pinctrl@1000000 {
compatible = "qcom,msm8916-pinctrl";
reg = <0x1000000 0x300000>;
@ -700,6 +728,9 @@ lpass: lpass@7708000 {
interrupt-names = "lpass-irq-lpaif";
reg = <0x07708000 0x10000>;
reg-names = "lpass-lpaif";
#address-cells = <1>;
#size-cells = <0>;
};
lpass_codec: codec{

2
arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
View File

@ -11,6 +11,8 @@ / {
model = "Huawei Nexus 6P";
compatible = "huawei,angler", "qcom,msm8994";
/* required for bootloader to select correct board */
qcom,msm-id = <207 0x20000>;
qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
qcom,board-id = <8026 0>;
aliases {

30
arch/arm64/boot/dts/qcom/msm8994-pins.dtsi
View File

@ -1,30 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
*/
&msmgpio {
blsp1_uart2_default: blsp1_uart2_default {
pinmux {
function = "blsp_uart2";
pins = "gpio4", "gpio5";
};
pinconf {
pins = "gpio4", "gpio5";
drive-strength = <16>;
bias-disable;
};
};
blsp1_uart2_sleep: blsp1_uart2_sleep {
pinmux {
function = "gpio";
pins = "gpio4", "gpio5";
};
pinconf {
pins = "gpio4", "gpio5";
drive-strength = <2>;
bias-pull-down;
};
};
};

605
arch/arm64/boot/dts/qcom/msm8994.dtsi
View File

@ -6,12 +6,6 @@
#include <dt-bindings/clock/qcom,gcc-msm8994.h>
/ {
model = "Qualcomm Technologies, Inc. MSM 8994";
compatible = "qcom,msm8994";
// msm-id and pmic-id are required by bootloader for
// proper selection of dt blob
qcom,msm-id = <207 0x20000>;
qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
interrupt-parent = <&intc>;
#address-cells = <2>;
@ -19,35 +13,166 @@ / {
chosen { };
clocks {
xo_board: xo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
sleep_clk: sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
cpus {
#address-cells = <1>;
#address-cells = <2>;
#size-cells = <0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&L2_0>;
};
CPU2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&L2_0>;
};
CPU3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&L2_0>;
};
CPU4: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
CPU5: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x101>;
enable-method = "psci";
next-level-cache = <&L2_1>;
};
CPU6: cpu@102 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x101>;
enable-method = "psci";
next-level-cache = <&L2_1>;
};
CPU7: cpu@103 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x101>;
enable-method = "psci";
next-level-cache = <&L2_1>;
};
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
};
};
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
core1 {
cpu = <&CPU1>;
};
core2 {
cpu = <&CPU2>;
};
core3 {
cpu = <&CPU3>;
};
};
cluster1 {
core0 {
cpu = <&CPU4>;
};
core1 {
cpu = <&CPU5>;
};
core2 {
cpu = <&CPU6>;
};
core3 {
cpu = <&CPU7>;
};
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <1 2 0xff08>,
<1 3 0xff08>,
<1 4 0xff08>,
<1 1 0xff08>;
memory {
device_type = "memory";
/* We expect the bootloader to fill in the reg */
reg = <0 0 0 0>;
};
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
};
psci {
compatible = "arm,psci-0.2";
method = "hvc";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
smem_mem: smem_region@6a00000 {
reg = <0x0 0x6a00000 0x0 0x200000>;
no-map;
};
};
smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
hwlocks = <&tcsr_mutex 3>;
};
soc: soc {
@ -62,7 +187,7 @@ intc: interrupt-controller@f9000000 {
interrupt-controller;
#interrupt-cells = <3>;
reg = <0xf9000000 0x1000>,
<0xf9002000 0x1000>;
<0xf9002000 0x1000>;
};
timer@f9020000 {
@ -123,30 +248,220 @@ frame@f9028000 {
};
};
restart@fc4ab000 {
compatible = "qcom,pshold";
reg = <0xfc4ab000 0x4>;
sdhc1: sdhci@f9824900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>,
<&xo_board>;
clock-names = "core", "iface", "xo";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
bus-width = <8>;
non-removable;
status = "disabled";
};
msmgpio: pinctrl@fd510000 {
compatible = "qcom,msm8994-pinctrl";
reg = <0xfd510000 0x4000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&msmgpio 0 0 146>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
blsp1_dma: dma@f9904000 {
compatible = "qcom,bam-v1.7.0";
reg = <0xf9904000 0x19000>;
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
qcom,controlled-remotely;
num-channels = <18>;
qcom,num-ees = <4>;
};
blsp1_uart2: serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991e000 0x1000>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clock-names = "core", "iface";
clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
<&clock_gcc GCC_BLSP1_AHB_CLK>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_uart2_default>;
pinctrl-1 = <&blsp1_uart2_sleep>;
status = "disabled";
};
blsp_i2c1: i2c@f9923000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9923000 0x500>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
clock-names = "iface", "core";
clock-frequency = <400000>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c1_default>;
pinctrl-1 = <&i2c1_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_spi0: spi@f9923000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0xf9923000 0x500>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
spi-max-frequency = <19200000>;
dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_spi0_default>;
pinctrl-1 = <&blsp1_spi0_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_i2c2: i2c@f9924000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9924000 0x500>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
clock-names = "iface", "core";
clock-frequency = <355000>;
dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c2_default>;
pinctrl-1 = <&i2c2_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
/* I2C3 doesn't exist */
blsp_i2c4: i2c@f9926000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9926000 0x500>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
clock-names = "iface", "core";
clock-frequency = <355000>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c4_default>;
pinctrl-1 = <&i2c4_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp2_dma: dma@f9944000 {
compatible = "qcom,bam-v1.7.0";
reg = <0xf9944000 0x19000>;
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
qcom,controlled-remotely;
num-channels = <18>;
qcom,num-ees = <4>;
};
/* According to downstream kernels, i2c6
* comes before i2c5 address-wise...
*/
blsp_i2c6: i2c@f9928000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9928000 0x500>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
clock-names = "iface", "core";
clock-frequency = <355000>;
dmas = <&blsp1_dma 22>, <&blsp1_dma 23>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c6_default>;
pinctrl-1 = <&i2c6_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp2_uart2: serial@f995e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995e000 0x1000>;
interrupts = <GIC_SPI 146 IRQ_TYPE_EDGE_FALLING>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
dmas = <&blsp2_dma 2>, <&blsp2_dma 3>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_uart2_default>;
pinctrl-1 = <&blsp2_uart2_sleep>;
status = "disabled";
};
blsp_i2c5: i2c@f9967000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9967000 0x500>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_AHB_CLK>,
<&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>;
clock-names = "iface", "core";
clock-frequency = <355000>;
dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c5_default>;
pinctrl-1 = <&i2c5_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
gcc: clock-controller@fc400000 {
compatible = "qcom,gcc-msm8994";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0xfc400000 0x2000>;
};
restart@fc4ab000 {
compatible = "qcom,pshold";
reg = <0xfc4ab000 0x4>;
};
spmi_bus: spmi@fc4c0000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xfc4cf000 0x1000>,
<0xfc4cb000 0x1000>,
<0xfc4ca000 0x1000>;
reg-names = "core", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
tcsr_mutex_regs: syscon@fd484000 {
@ -154,41 +469,181 @@ tcsr_mutex_regs: syscon@fd484000 {
reg = <0xfd484000 0x2000>;
};
clock_gcc: clock-controller@fc400000 {
compatible = "qcom,gcc-msm8994";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0xfc400000 0x2000>;
};
};
tlmm: pinctrl@fd510000 {
compatible = "qcom,msm8994-pinctrl";
reg = <0xfd510000 0x4000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&tlmm 0 0 146>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
memory {
device_type = "memory";
// We expect the bootloader to fill in the reg
reg = <0 0 0 0>;
};
blsp1_uart2_default: blsp1-uart2-default {
function = "blsp_uart2";
pins = "gpio4", "gpio5";
drive-strength = <16>;
bias-disable;
};
xo_board: xo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
blsp1_uart2_sleep: blsp1-uart2-sleep {
function = "gpio";
pins = "gpio4", "gpio5";
drive-strength = <2>;
bias-pull-down;
};
sleep_clk: sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
blsp2_uart2_default: blsp2-uart2-default {
function = "blsp_uart8";
pins = "gpio45", "gpio46";
drive-strength = <2>;
bias-disable;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
blsp2_uart2_sleep: blsp2-uart2-sleep {
function = "gpio";
pins = "gpio45", "gpio46";
drive-strength = <2>;
bias-pull-down;
};
smem_mem: smem_region@6a00000 {
reg = <0x0 0x6a00000 0x0 0x200000>;
no-map;
i2c1_default: i2c1-default {
function = "blsp_i2c1";
pins = "gpio2", "gpio3";
drive-strength = <2>;
bias-disable;
};
i2c1_sleep: i2c1-sleep {
function = "gpio";
pins = "gpio2", "gpio3";
drive-strength = <2>;
bias-disable;
};
i2c2_default: i2c2-default {
function = "blsp_i2c2";
pins = "gpio6", "gpio7";
drive-strength = <2>;
bias-disable;
};
i2c2_sleep: i2c2-sleep {
function = "gpio";
pins = "gpio6", "gpio7";
drive-strength = <2>;
bias-disable;
};
i2c4_default: i2c4-default {
function = "blsp_i2c4";
pins = "gpio19", "gpio20";
drive-strength = <2>;
bias-disable;
};
i2c4_sleep: i2c4-sleep {
function = "gpio";
pins = "gpio19", "gpio20";
drive-strength = <2>;
bias-pull-down;
input-enable;
};
i2c5_default: i2c5-default {
function = "blsp_i2c5";
pins = "gpio23", "gpio24";
drive-strength = <2>;
bias-disable;
};
i2c5_sleep: i2c5-sleep {
function = "gpio";
pins = "gpio23", "gpio24";
drive-strength = <2>;
bias-disable;
};
i2c6_default: i2c6-default {
function = "blsp_i2c6";
pins = "gpio28", "gpio27";
drive-strength = <2>;
bias-disable;
};
i2c6_sleep: i2c6-sleep {
function = "gpio";
pins = "gpio28", "gpio27";
drive-strength = <2>;
bias-disable;
};
blsp1_spi0_default: blsp1-spi0-default {
default {
function = "blsp_spi1";
pins = "gpio0", "gpio1", "gpio3";
drive-strength = <10>;
bias-pull-down;
};
cs {
function = "gpio";
pins = "gpio8";
drive-strength = <2>;
bias-disable;
};
};
blsp1_spi0_sleep: blsp1-spi0-sleep {
pins = "gpio0", "gpio1", "gpio3";
drive-strength = <2>;
bias-disable;
};
sdc1_clk_on: clk-on {
pins = "sdc1_clk";
bias-disable;
drive-strength = <16>;
};
sdc1_clk_off: clk-off {
pins = "sdc1_clk";
bias-disable;
drive-strength = <2>;
};
sdc1_cmd_on: cmd-on {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <8>;
};
sdc1_cmd_off: cmd-off {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <2>;
};
sdc1_data_on: data-on {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <8>;
};
sdc1_data_off: data-off {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <2>;
};
sdc1_rclk_on: rclk-on {
pins = "sdc1_rclk";
bias-pull-down;
};
sdc1_rclk_off: rclk-off {
pins = "sdc1_rclk";
bias-pull-down;
};
};
};
@ -198,12 +653,12 @@ tcsr_mutex: hwlock {
#hwlock-cells = <1>;
};
qcom,smem@6a00000 {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
hwlocks = <&tcsr_mutex 3>;
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 0xff08>,
<GIC_PPI 3 0xff08>,
<GIC_PPI 4 0xff08>,
<GIC_PPI 1 0xff08>;
};
};
#include "msm8994-pins.dtsi"

2
arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
View File

@ -202,7 +202,7 @@ vreg_l14a_1p88: l14 {
regulator-min-microvolt = <1880000>;
regulator-max-microvolt = <1880000>;
};
vreg_15a_1p8: l15 {
vreg_l15a_1p8: l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};

5
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
View File

@ -25,6 +25,11 @@ keyboard@3a {
};
};
&remoteproc_mss {
firmware-name = "qcom/LENOVO/81F1/qcdsp1v28998.mbn",
"qcom/LENOVO/81F1/qcdsp28998.mbn";
};
&sdhc2 {
cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
};

2
arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
View File

@ -235,7 +235,7 @@ vreg_l14a_1p88: l14 {
regulator-min-microvolt = <1880000>;
regulator-max-microvolt = <1880000>;
};
vreg_15a_1p8: l15 {
vreg_l15a_1p8: l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};

50
arch/arm64/boot/dts/qcom/pm660.dtsi Normal file
View File

@ -0,0 +1,50 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, Konrad Dybcio
*/
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
pmic@0 {
compatible = "qcom,pm660", "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
rtc@6000 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000>, <0x6100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
pon: pon@800 {
compatible = "qcom,pm8916-pon";
reg = <0x800>;
pwrkey {
compatible = "qcom,pm8941-pwrkey";
interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_POWER>;
};
};
pm660_gpios: gpios@c000 {
compatible = "qcom,pm660-gpio";
reg = <0xc000>;
gpio-controller;
gpio-ranges = <&pm660_gpios 0 0 13>;
#gpio-cells = <2>;
interrupt-controller;
interrupt-cells =<2>;
};
};
};

36
arch/arm64/boot/dts/qcom/pm660l.dtsi Normal file
View File

@ -0,0 +1,36 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, Konrad Dybcio
*/
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
pmic@2 {
compatible = "qcom,pm660l", "qcom,spmi-pmic";
reg = <0x2 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm660l_gpios: gpios@c000 {
compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
gpio-ranges = <&pm660l_gpios 0 0 12>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pmic@3 {
compatible = "qcom,pm660l", "qcom,spmi-pmic";
reg = <0x3 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
};
};

37
arch/arm64/boot/dts/qcom/pm8009.dtsi Normal file
View File

@ -0,0 +1,37 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
* Copyright (c) 2020, Linaro Limited
*/
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
pmic@a {
compatible = "qcom,pm8009", "qcom,spmi-pmic";
reg = <0xa SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8009_pon: pon@800 {
compatible = "qcom,pm8916-pon";
reg = <0x0800>;
};
pm8009_gpios: gpio@c000 {
compatible = "qcom,pm8005-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pmic@b {
compatible = "qcom,pm8009", "qcom,spmi-pmic";
reg = <0xb SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
};
};

42
arch/arm64/boot/dts/qcom/pm8150.dtsi
View File

@ -9,6 +9,37 @@
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/iio/qcom,spmi-vadc.h>
/ {
thermal-zones {
pm8150 {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-sensors = <&pm8150_temp>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
};
};
&spmi_bus {
pm8150_0: pmic@0 {
compatible = "qcom,pm8150", "qcom,spmi-pmic";
@ -30,6 +61,15 @@ pwrkey {
};
};
pm8150_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
io-channels = <&pm8150_adc ADC5_DIE_TEMP>;
io-channel-names = "thermal";
#thermal-sensor-cells = <0>;
};
pm8150_adc: adc@3100 {
compatible = "qcom,spmi-adc5";
reg = <0x3100>;
@ -38,8 +78,6 @@ pm8150_adc: adc@3100 {
#io-channel-cells = <1>;
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
ref-gnd@0 {
reg = <ADC5_REF_GND>;
qcom,pre-scaling = <1 1>;

44
arch/arm64/boot/dts/qcom/pm8150b.dtsi
View File

@ -8,6 +8,37 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
/ {
thermal-zones {
pm8150b {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-sensors = <&pm8150b_temp>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
};
};
&spmi_bus {
pmic@2 {
compatible = "qcom,pm8150b", "qcom,spmi-pmic";
@ -22,7 +53,16 @@ power-on@800 {
status = "disabled";
};
adc@3100 {
pm8150b_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
io-channels = <&pm8150b_adc ADC5_DIE_TEMP>;
io-channel-names = "thermal";
#thermal-sensor-cells = <0>;
};
pm8150b_adc: adc@3100 {
compatible = "qcom,spmi-adc5";
reg = <0x3100>;
#address-cells = <1>;
@ -30,8 +70,6 @@ adc@3100 {
#io-channel-cells = <1>;
interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
ref-gnd@0 {
reg = <ADC5_REF_GND>;
qcom,pre-scaling = <1 1>;

44
arch/arm64/boot/dts/qcom/pm8150l.dtsi
View File

@ -8,6 +8,37 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
/ {
thermal-zones {
pm8150l {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-sensors = <&pm8150l_temp>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
};
};
&spmi_bus {
pmic@4 {
compatible = "qcom,pm8150l", "qcom,spmi-pmic";
@ -22,7 +53,16 @@ power-on@800 {
status = "disabled";
};
adc@3100 {
pm8150l_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
io-channels = <&pm8150l_adc ADC5_DIE_TEMP>;
io-channel-names = "thermal";
#thermal-sensor-cells = <0>;
};
pm8150l_adc: adc@3100 {
compatible = "qcom,spmi-adc5";
reg = <0x3100>;
#address-cells = <1>;
@ -30,8 +70,6 @@ adc@3100 {
#io-channel-cells = <1>;
interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
ref-gnd@0 {
reg = <ADC5_REF_GND>;
qcom,pre-scaling = <1 1>;

12
arch/arm64/boot/dts/qcom/pmi8998.dtsi
View File

@ -25,5 +25,17 @@ pmi8998_lsid1: pmic@3 {
reg = <0x3 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
labibb {
compatible = "qcom,pmi8998-lab-ibb";
ibb: ibb {
interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>;
};
lab: lab {
interrupts = <0x3 0xde 0x0 IRQ_TYPE_EDGE_RISING>;
};
};
};
};

15
arch/arm64/boot/dts/qcom/qcs404.dtsi
View File

@ -1097,6 +1097,21 @@ blsp2_spi0: spi@7af5000 {
status = "disabled";
};
imem@8600000 {
compatible = "simple-mfd";
reg = <0x08600000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x08600000 0x1000>;
pil-reloc@94c {
compatible = "qcom,pil-reloc-info";
reg = <0x94c 0xc8>;
};
};
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;

15
arch/arm64/boot/dts/qcom/sc7180-idp.dts
View File

@ -21,6 +21,7 @@ aliases {
bluetooth0 = &bluetooth;
hsuart0 = &uart3;
serial0 = &uart8;
wifi0 = &wifi;
};
chosen {
@ -312,7 +313,7 @@ &qupv3_id_1 {
&remoteproc_mpss {
status = "okay";
compatible = "qcom,sc7180-mss-pil";
iommus = <&apps_smmu 0x460 0x1>, <&apps_smmu 0x444 0x3>;
iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
memory-region = <&mba_mem &mpss_mem>;
};
@ -389,6 +390,18 @@ video-firmware {
};
};
&wifi {
status = "okay";
vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
vdd-3.3-ch1-supply = <&vreg_l11c_3p3>;
wifi-firmware {
iommus = <&apps_smmu 0xc2 0x1>;
};
};
/* PINCTRL - additions to nodes defined in sc7180.dtsi */
&qspi_clk {

573
arch/arm64/boot/dts/qcom/sc7180.dtsi
View File

@ -10,6 +10,7 @@
#include <dt-bindings/clock/qcom,gpucc-sc7180.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,videocc-sc7180.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sc7180.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy-qcom-qusb2.h>
@ -130,6 +131,9 @@ &LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@ -153,6 +157,9 @@ &LITTLE_CPU_SLEEP_1
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_100>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_100: l2-cache {
@ -172,6 +179,9 @@ &LITTLE_CPU_SLEEP_1
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_200>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_200: l2-cache {
@ -191,6 +201,9 @@ &LITTLE_CPU_SLEEP_1
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_300>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_300: l2-cache {
@ -210,6 +223,9 @@ &LITTLE_CPU_SLEEP_1
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_400>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_400: l2-cache {
@ -229,6 +245,9 @@ &LITTLE_CPU_SLEEP_1
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_500>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_500: l2-cache {
@ -248,6 +267,9 @@ &BIG_CPU_SLEEP_1
capacity-dmips-mhz = <1740>;
dynamic-power-coefficient = <405>;
next-level-cache = <&L2_600>;
operating-points-v2 = <&cpu6_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 1>;
L2_600: l2-cache {
@ -267,6 +289,9 @@ &BIG_CPU_SLEEP_1
capacity-dmips-mhz = <1740>;
dynamic-power-coefficient = <405>;
next-level-cache = <&L2_700>;
operating-points-v2 = <&cpu6_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 1>;
L2_700: l2-cache {
@ -366,6 +391,141 @@ CLUSTER_SLEEP_0: cluster-sleep-0 {
};
};
cpu0_opp_table: cpu0_opp_table {
compatible = "operating-points-v2";
opp-shared;
cpu0_opp1: opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-peak-kBps = <1200000 4800000>;
};
cpu0_opp2: opp-576000000 {
opp-hz = /bits/ 64 <576000000>;
opp-peak-kBps = <1200000 4800000>;
};
cpu0_opp3: opp-768000000 {
opp-hz = /bits/ 64 <768000000>;
opp-peak-kBps = <1200000 4800000>;
};
cpu0_opp4: opp-1017600000 {
opp-hz = /bits/ 64 <1017600000>;
opp-peak-kBps = <1804000 8908800>;
};
cpu0_opp5: opp-1248000000 {
opp-hz = /bits/ 64 <1248000000>;
opp-peak-kBps = <2188000 12902400>;
};
cpu0_opp6: opp-1324800000 {
opp-hz = /bits/ 64 <1324800000>;
opp-peak-kBps = <2188000 12902400>;
};
cpu0_opp7: opp-1516800000 {
opp-hz = /bits/ 64 <1516800000>;
opp-peak-kBps = <3072000 15052800>;
};
cpu0_opp8: opp-1612800000 {
opp-hz = /bits/ 64 <1612800000>;
opp-peak-kBps = <3072000 15052800>;
};
cpu0_opp9: opp-1708800000 {
opp-hz = /bits/ 64 <1708800000>;
opp-peak-kBps = <3072000 15052800>;
};
cpu0_opp10: opp-1804800000 {
opp-hz = /bits/ 64 <1804800000>;
opp-peak-kBps = <4068000 22425600>;
};
};
cpu6_opp_table: cpu6_opp_table {
compatible = "operating-points-v2";
opp-shared;
cpu6_opp1: opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-peak-kBps = <2188000 8908800>;
};
cpu6_opp2: opp-652800000 {
opp-hz = /bits/ 64 <652800000>;
opp-peak-kBps = <2188000 8908800>;
};
cpu6_opp3: opp-825600000 {
opp-hz = /bits/ 64 <825600000>;
opp-peak-kBps = <2188000 8908800>;
};
cpu6_opp4: opp-979200000 {
opp-hz = /bits/ 64 <979200000>;
opp-peak-kBps = <2188000 8908800>;
};
cpu6_opp5: opp-1113600000 {
opp-hz = /bits/ 64 <1113600000>;
opp-peak-kBps = <2188000 8908800>;
};
cpu6_opp6: opp-1267200000 {
opp-hz = /bits/ 64 <1267200000>;
opp-peak-kBps = <4068000 12902400>;
};
cpu6_opp7: opp-1555200000 {
opp-hz = /bits/ 64 <1555200000>;
opp-peak-kBps = <4068000 15052800>;
};
cpu6_opp8: opp-1708800000 {
opp-hz = /bits/ 64 <1708800000>;
opp-peak-kBps = <6220000 19353600>;
};
cpu6_opp9: opp-1843200000 {
opp-hz = /bits/ 64 <1843200000>;
opp-peak-kBps = <6220000 19353600>;
};
cpu6_opp10: opp-1900800000 {
opp-hz = /bits/ 64 <1900800000>;
opp-peak-kBps = <6220000 22425600>;
};
cpu6_opp11: opp-1996800000 {
opp-hz = /bits/ 64 <1996800000>;
opp-peak-kBps = <6220000 22425600>;
};
cpu6_opp12: opp-2112000000 {
opp-hz = /bits/ 64 <2112000000>;
opp-peak-kBps = <6220000 22425600>;
};
cpu6_opp13: opp-2208000000 {
opp-hz = /bits/ 64 <2208000000>;
opp-peak-kBps = <7216000 22425600>;
};
cpu6_opp14: opp-2323200000 {
opp-hz = /bits/ 64 <2323200000>;
opp-peak-kBps = <7216000 22425600>;
};
cpu6_opp15: opp-2400000000 {
opp-hz = /bits/ 64 <2400000000>;
opp-peak-kBps = <8532000 23347200>;
};
};
memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
@ -524,6 +684,8 @@ sdhc_1: sdhci@7c4000 {
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>;
clock-names = "core", "iface";
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&sdhc1_opp_table>;
bus-width = <8>;
non-removable;
@ -535,6 +697,39 @@ sdhc_1: sdhci@7c4000 {
mmc-hs400-enhanced-strobe;
status = "disabled";
sdhc1_opp_table: sdhc1-opp-table {
compatible = "operating-points-v2";
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-384000000 {
opp-hz = /bits/ 64 <384000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
};
};
qup_opp_table: qup-opp-table {
compatible = "operating-points-v2";
opp-75000000 {
opp-hz = /bits/ 64 <75000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-128000000 {
opp-hz = /bits/ 64 <128000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
qupv3_id_0: geniqup@8c0000 {
@ -547,6 +742,8 @@ qupv3_id_0: geniqup@8c0000 {
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x43 0x0>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>;
interconnect-names = "qup-core";
status = "disabled";
i2c0: i2c@880000 {
@ -559,6 +756,11 @@ i2c0: i2c@880000 {
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
};
@ -572,6 +774,11 @@ spi0: spi@880000 {
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@ -583,6 +790,11 @@ uart0: serial@880000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@ -596,6 +808,11 @@ i2c1: i2c@884000 {
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
};
@ -609,6 +826,11 @@ spi1: spi@884000 {
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@ -620,6 +842,11 @@ uart1: serial@884000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@ -633,6 +860,11 @@ i2c2: i2c@888000 {
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
};
@ -644,6 +876,11 @@ uart2: serial@888000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@ -657,6 +894,11 @@ i2c3: i2c@88c000 {
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
};
@ -670,6 +912,11 @@ spi3: spi@88c000 {
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@ -681,6 +928,11 @@ uart3: serial@88c000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@ -694,6 +946,11 @@ i2c4: i2c@890000 {
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
};
@ -705,6 +962,11 @@ uart4: serial@890000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@ -718,6 +980,11 @@ i2c5: i2c@894000 {
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
};
@ -731,6 +998,11 @@ spi5: spi@894000 {
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@ -742,6 +1014,11 @@ uart5: serial@894000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
};
@ -756,6 +1033,8 @@ qupv3_id_1: geniqup@ac0000 {
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x4c3 0x0>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>;
interconnect-names = "qup-core";
status = "disabled";
i2c6: i2c@a80000 {
@ -768,6 +1047,11 @@ i2c6: i2c@a80000 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
};
@ -781,6 +1065,11 @@ spi6: spi@a80000 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@ -792,6 +1081,11 @@ uart6: serial@a80000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart6_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@ -805,6 +1099,11 @@ i2c7: i2c@a84000 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
};
@ -816,6 +1115,11 @@ uart7: serial@a84000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@ -829,6 +1133,11 @@ i2c8: i2c@a88000 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
};
@ -842,6 +1151,11 @@ spi8: spi@a88000 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@ -853,6 +1167,11 @@ uart8: serial@a88000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart8_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@ -866,6 +1185,11 @@ i2c9: i2c@a8c000 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
};
@ -877,6 +1201,11 @@ uart9: serial@a8c000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart9_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@ -890,6 +1219,11 @@ i2c10: i2c@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
};
@ -903,6 +1237,11 @@ spi10: spi@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@ -914,6 +1253,11 @@ uart10: serial@a90000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart10_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@ -927,6 +1271,11 @@ i2c11: i2c@a94000 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
};
@ -940,6 +1289,11 @@ spi11: spi@a94000 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@ -951,6 +1305,11 @@ uart11: serial@a94000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart11_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
};
@ -1459,6 +1818,57 @@ pinconf-sd-cd {
};
};
remoteproc_mpss: remoteproc@4080000 {
compatible = "qcom,sc7180-mpss-pas";
reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
reg-names = "qdsp6", "rmb";
interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover",
"stop-ack", "shutdown-ack";
clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
<&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
<&gcc GCC_MSS_NAV_AXI_CLK>,
<&gcc GCC_MSS_SNOC_AXI_CLK>,
<&gcc GCC_MSS_MFAB_AXIS_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "bus", "nav", "snoc_axi",
"mnoc_axi", "xo";
power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
<&rpmhpd SC7180_CX>,
<&rpmhpd SC7180_MX>,
<&rpmhpd SC7180_MSS>;
power-domain-names = "load_state", "cx", "mx", "mss";
memory-region = <&mpss_mem>;
qcom,smem-states = <&modem_smp2p_out 0>;
qcom,smem-state-names = "stop";
resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
<&pdc_reset PDC_MODEM_SYNC_RESET>;
reset-names = "mss_restart", "pdc_reset";
qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
qcom,spare-regs = <&tcsr_regs 0xb3e4>;
status = "disabled";
glink-edge {
interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
label = "modem";
qcom,remote-pid = <1>;
mboxes = <&apss_shared 12>;
};
};
gpu: gpu@5000000 {
compatible = "qcom,adreno-618.0", "qcom,adreno";
#stream-id-cells = <16>;
@ -2054,57 +2464,6 @@ apss_merge_funnel_in: endpoint {
};
};
remoteproc_mpss: remoteproc@4080000 {
compatible = "qcom,sc7180-mpss-pas";
reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
reg-names = "qdsp6", "rmb";
interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover",
"stop-ack", "shutdown-ack";
clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
<&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
<&gcc GCC_MSS_NAV_AXI_CLK>,
<&gcc GCC_MSS_SNOC_AXI_CLK>,
<&gcc GCC_MSS_MFAB_AXIS_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "bus", "nav", "snoc_axi",
"mnoc_axi", "xo";
power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
<&rpmhpd SC7180_CX>,
<&rpmhpd SC7180_MX>,
<&rpmhpd SC7180_MSS>;
power-domain-names = "load_state", "cx", "mx", "mss";
memory-region = <&mpss_mem>;
qcom,smem-states = <&modem_smp2p_out 0>;
qcom,smem-state-names = "stop";
resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
<&pdc_reset PDC_MODEM_SYNC_RESET>;
reset-names = "mss_restart", "pdc_reset";
qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
qcom,spare-regs = <&tcsr_regs 0xb3e4>;
status = "disabled";
glink-edge {
interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
label = "modem";
qcom,remote-pid = <1>;
mboxes = <&apss_shared 12>;
};
};
sdhc_2: sdhci@8804000 {
compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
@ -2117,10 +2476,45 @@ sdhc_2: sdhci@8804000 {
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
<&gcc GCC_SDCC2_AHB_CLK>;
clock-names = "core", "iface";
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&sdhc2_opp_table>;
bus-width = <4>;
status = "disabled";
sdhc2_opp_table: sdhc2-opp-table {
compatible = "operating-points-v2";
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-202000000 {
opp-hz = /bits/ 64 <202000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
};
};
qspi_opp_table: qspi-opp-table {
compatible = "operating-points-v2";
opp-75000000 {
opp-hz = /bits/ 64 <75000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-150000000 {
opp-hz = /bits/ 64 <150000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
qspi: spi@88dc000 {
@ -2132,6 +2526,11 @@ qspi: spi@88dc000 {
clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
<&gcc GCC_QSPI_CORE_CLK>;
clock-names = "iface", "core";
interconnects = <&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QSPI_0>;
interconnect-names = "qspi-config";
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qspi_opp_table>;
status = "disabled";
};
@ -2355,6 +2754,8 @@ mdp: mdp@ae01000 {
<19200000>,
<19200000>,
<19200000>;
operating-points-v2 = <&mdp_opp_table>;
power-domains = <&rpmhpd SC7180_CX>;
interrupt-parent = <&mdss>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
@ -2372,6 +2773,31 @@ dpu_intf1_out: endpoint {
};
};
};
mdp_opp_table: mdp-opp-table {
compatible = "operating-points-v2";
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-345000000 {
opp-hz = /bits/ 64 <345000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-460000000 {
opp-hz = /bits/ 64 <460000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
dsi0: dsi@ae94000 {
@ -2395,6 +2821,9 @@ dsi0: dsi@ae94000 {
"iface",
"bus";
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmhpd SC7180_CX>;
phys = <&dsi_phy>;
phy-names = "dsi";
@ -2420,6 +2849,25 @@ dsi0_out: endpoint {
};
};
};
dsi_opp_table: dsi-opp-table {
compatible = "operating-points-v2";
opp-187500000 {
opp-hz = /bits/ 64 <187500000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-358000000 {
opp-hz = /bits/ 64 <358000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
};
};
dsi_phy: dsi-phy@ae94400 {
@ -2814,6 +3262,29 @@ cpufreq_hw: cpufreq@18323000 {
#freq-domain-cells = <1>;
};
wifi: wifi@18800000 {
compatible = "qcom,wcn3990-wifi";
reg = <0 0x18800000 0 0x800000>;
reg-names = "membase";
iommus = <&apps_smmu 0xc0 0x1>;
interrupts =
<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
memory-region = <&wlan_mem>;
qcom,msa-fixed-perm;
status = "disabled";
};
};
thermal-zones {

13
arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts Normal file
View File

@ -0,0 +1,13 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, Martin Botka
*/
/dts-v1/;
#include "sdm630-sony-xperia-ganges.dtsi"
/ {
model = "Sony Xperia 10";
compatible = "sony,kirin-row", "qcom,sdm630";
};

40
arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi Normal file
View File

@ -0,0 +1,40 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, Martin Botka
*/
/dts-v1/;
/* Ganges is very similar to Nile, but
* there are some differences that will need
* to be addresed when more peripherals are
* enabled upstream. Hence the separate DTSI.
*/
#include "sdm630-sony-xperia-nile.dtsi"
/ {
chosen {
framebuffer@9d400000 {
reg = <0 0x9d400000 0 (2520 * 1080 * 4)>;
height = <2520>;
};
};
/* Yes, this is intentional.
* Ganges devices only use gpio-keys for
* Volume Down, but currently there's an
* issue with it that has to be resolved.
* Until then, let's not make the kernel panic
*/
/delete-node/ gpio-keys;
soc {
i2c@c175000 {
status = "okay";
/* Novatek touchscreen */
};
};
};

13
arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts Normal file
View File

@ -0,0 +1,13 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, Konrad Dybcio
*/
/dts-v1/;
#include "sdm630-sony-xperia-nile.dtsi"
/ {
model = "Sony Xperia XA2 Ultra";
compatible = "sony,discovery-row", "qcom,sdm630";
};

13
arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts Normal file
View File

@ -0,0 +1,13 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, Konrad Dybcio
*/
/dts-v1/;
#include "sdm630-sony-xperia-nile.dtsi"
/ {
model = "Sony Xperia XA2";
compatible = "sony,pioneer-row", "qcom,sdm630";
};

20
arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts Normal file
View File

@ -0,0 +1,20 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, Konrad Dybcio
*/
/dts-v1/;
#include "sdm630-sony-xperia-nile.dtsi"
/ {
model = "Sony Xperia XA2 Plus";
compatible = "sony,voyager-row", "qcom,sdm630";
chosen {
framebuffer@9d400000 {
reg = <0 0x9d400000 0 (2160 * 1080 * 4)>;
height = <2160>;
};
};
};

136
arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi Normal file
View File

@ -0,0 +1,136 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, Konrad Dybcio
*/
/dts-v1/;
#include "sdm630.dtsi"
#include "pm660.dtsi"
#include "pm660l.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/input/gpio-keys.h>
/ {
/* required for bootloader to select correct board */
qcom,msm-id = <318 0>;
qcom,board-id = <8 1>;
qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>;
/* This part enables graphical output via bootloader-enabled display */
chosen {
bootargs = "earlycon=tty0 console=tty0";
#address-cells = <2>;
#size-cells = <2>;
ranges;
stdout-path = "framebuffer0";
framebuffer0: framebuffer@9d400000 {
compatible = "simple-framebuffer";
reg = <0 0x9d400000 0 (1920 * 1080 * 4)>;
width = <1080>;
height = <1920>;
stride = <(1080 * 4)>;
format = "a8r8g8b8";
status= "okay";
};
};
gpio_keys {
status = "okay";
compatible = "gpio-keys";
input-name = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
camera_focus {
label = "Camera Focus";
gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
debounce-interval = <15>;
};
camera_snapshot {
label = "Camera Snapshot";
gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
debounce-interval = <15>;
};
vol_down {
label = "Volume Down";
gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
gpio-key,wakeup;
debounce-interval = <15>;
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
ramoops@ffc00000 {
compatible = "ramoops";
reg = <0x0 0xffc00000 0x0 0x100000>;
record-size = <0x10000>;
console-size = <0x60000>;
ftrace-size = <0x10000>;
pmsg-size = <0x20000>;
ecc-size = <16>;
status = "okay";
};
debug_region@ffb00000 {
reg = <0x00 0xffb00000 0x00 0x100000>;
no-map;
};
removed_region@85800000 {
reg = <0x00 0x85800000 0x00 0x3700000>;
no-map;
};
};
soc {
sdhci@c0c4000 {
status = "okay";
mmc-ddr-1_8v;
/* SoMC Nile platform's eMMC doesn't support HS200 mode */
mmc-hs400-1_8v;
};
i2c@c175000 {
status = "okay";
/* Synaptics touchscreen */
};
i2c@c176000 {
status = "okay";
/* SMB1351 charger */
};
serial@c1af000 {
status = "okay";
};
/* I2C3, 4, 5, 7 and 8 are disabled on this board. */
i2c@c1b6000 {
status = "okay";
/* NXP NFC */
};
};
};

1174
arch/arm64/boot/dts/qcom/sdm630.dtsi Normal file
View File

File diff suppressed because it is too large Load Diff

20
arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts Normal file
View File

@ -0,0 +1,20 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, Martin Botka
*/
/dts-v1/;
/* Mermaid uses sdm636, but it's different ever so slightly
* that we can ignore it for the time being. Sony also commonizes
* the Ganges platform as a whole in downstream kernels.
*/
#include "sdm630-sony-xperia-ganges.dtsi"
/ {
model = "Sony Xperia 10 Plus";
compatible = "sony,mermaid-row", "qcom,sdm636";
qcom,msm-id = <345 0>;
qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00 0x1001b 0x102001a 0x00 0x00>;
};

2
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
View File

@ -634,7 +634,7 @@ &mdss_mdp {
};
&mss_pil {
iommus = <&apps_smmu 0x780 0x1>,
iommus = <&apps_smmu 0x781 0x0>,
<&apps_smmu 0x724 0x3>;
};

507
arch/arm64/boot/dts/qcom/sdm845.dtsi
View File

@ -12,6 +12,7 @@
#include <dt-bindings/clock/qcom,lpass-sdm845.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,videocc-sdm845.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sdm845.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy-qcom-qusb2.h>
@ -198,6 +199,9 @@ &LITTLE_CPU_SLEEP_1
capacity-dmips-mhz = <607>;
dynamic-power-coefficient = <100>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
@ -220,6 +224,9 @@ &LITTLE_CPU_SLEEP_1
capacity-dmips-mhz = <607>;
dynamic-power-coefficient = <100>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_100>;
L2_100: l2-cache {
@ -239,6 +246,9 @@ &LITTLE_CPU_SLEEP_1
capacity-dmips-mhz = <607>;
dynamic-power-coefficient = <100>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_200>;
L2_200: l2-cache {
@ -258,6 +268,9 @@ &LITTLE_CPU_SLEEP_1
capacity-dmips-mhz = <607>;
dynamic-power-coefficient = <100>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_300>;
L2_300: l2-cache {
@ -277,6 +290,9 @@ &BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
dynamic-power-coefficient = <396>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_400>;
L2_400: l2-cache {
@ -296,6 +312,9 @@ &BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
dynamic-power-coefficient = <396>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_500>;
L2_500: l2-cache {
@ -315,6 +334,9 @@ &BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
dynamic-power-coefficient = <396>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_600>;
L2_600: l2-cache {
@ -334,6 +356,9 @@ &BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
dynamic-power-coefficient = <396>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_700>;
L2_700: l2-cache {
@ -433,6 +458,266 @@ CLUSTER_SLEEP_0: cluster-sleep-0 {
};
};
cpu0_opp_table: cpu0_opp_table {
compatible = "operating-points-v2";
opp-shared;
cpu0_opp1: opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-peak-kBps = <800000 4800000>;
};
cpu0_opp2: opp-403200000 {
opp-hz = /bits/ 64 <403200000>;
opp-peak-kBps = <800000 4800000>;
};
cpu0_opp3: opp-480000000 {
opp-hz = /bits/ 64 <480000000>;
opp-peak-kBps = <800000 6451200>;
};
cpu0_opp4: opp-576000000 {
opp-hz = /bits/ 64 <576000000>;
opp-peak-kBps = <800000 6451200>;
};
cpu0_opp5: opp-652800000 {
opp-hz = /bits/ 64 <652800000>;
opp-peak-kBps = <800000 7680000>;
};
cpu0_opp6: opp-748800000 {
opp-hz = /bits/ 64 <748800000>;
opp-peak-kBps = <1804000 9216000>;
};
cpu0_opp7: opp-825600000 {
opp-hz = /bits/ 64 <825600000>;
opp-peak-kBps = <1804000 9216000>;
};
cpu0_opp8: opp-902400000 {
opp-hz = /bits/ 64 <902400000>;
opp-peak-kBps = <1804000 10444800>;
};
cpu0_opp9: opp-979200000 {
opp-hz = /bits/ 64 <979200000>;
opp-peak-kBps = <1804000 11980800>;
};
cpu0_opp10: opp-1056000000 {
opp-hz = /bits/ 64 <1056000000>;
opp-peak-kBps = <1804000 11980800>;
};
cpu0_opp11: opp-1132800000 {
opp-hz = /bits/ 64 <1132800000>;
opp-peak-kBps = <2188000 13516800>;
};
cpu0_opp12: opp-1228800000 {
opp-hz = /bits/ 64 <1228800000>;
opp-peak-kBps = <2188000 15052800>;
};
cpu0_opp13: opp-1324800000 {
opp-hz = /bits/ 64 <1324800000>;
opp-peak-kBps = <2188000 16588800>;
};
cpu0_opp14: opp-1420800000 {
opp-hz = /bits/ 64 <1420800000>;
opp-peak-kBps = <3072000 18124800>;
};
cpu0_opp15: opp-1516800000 {
opp-hz = /bits/ 64 <1516800000>;
opp-peak-kBps = <3072000 19353600>;
};
cpu0_opp16: opp-1612800000 {
opp-hz = /bits/ 64 <1612800000>;
opp-peak-kBps = <4068000 19353600>;
};
cpu0_opp17: opp-1689600000 {
opp-hz = /bits/ 64 <1689600000>;
opp-peak-kBps = <4068000 20889600>;
};
cpu0_opp18: opp-1766400000 {
opp-hz = /bits/ 64 <1766400000>;
opp-peak-kBps = <4068000 22425600>;
};
};
cpu4_opp_table: cpu4_opp_table {
compatible = "operating-points-v2";
opp-shared;
cpu4_opp1: opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-peak-kBps = <800000 4800000>;
};
cpu4_opp2: opp-403200000 {
opp-hz = /bits/ 64 <403200000>;
opp-peak-kBps = <800000 4800000>;
};
cpu4_opp3: opp-480000000 {
opp-hz = /bits/ 64 <480000000>;
opp-peak-kBps = <1804000 4800000>;
};
cpu4_opp4: opp-576000000 {
opp-hz = /bits/ 64 <576000000>;
opp-peak-kBps = <1804000 4800000>;
};
cpu4_opp5: opp-652800000 {
opp-hz = /bits/ 64 <652800000>;
opp-peak-kBps = <1804000 4800000>;
};
cpu4_opp6: opp-748800000 {
opp-hz = /bits/ 64 <748800000>;
opp-peak-kBps = <1804000 4800000>;
};
cpu4_opp7: opp-825600000 {
opp-hz = /bits/ 64 <825600000>;
opp-peak-kBps = <2188000 9216000>;
};
cpu4_opp8: opp-902400000 {
opp-hz = /bits/ 64 <902400000>;
opp-peak-kBps = <2188000 9216000>;
};
cpu4_opp9: opp-979200000 {
opp-hz = /bits/ 64 <979200000>;
opp-peak-kBps = <2188000 9216000>;
};
cpu4_opp10: opp-1056000000 {
opp-hz = /bits/ 64 <1056000000>;
opp-peak-kBps = <3072000 9216000>;
};
cpu4_opp11: opp-1132800000 {
opp-hz = /bits/ 64 <1132800000>;
opp-peak-kBps = <3072000 11980800>;
};
cpu4_opp12: opp-1209600000 {
opp-hz = /bits/ 64 <1209600000>;
opp-peak-kBps = <4068000 11980800>;
};
cpu4_opp13: opp-1286400000 {
opp-hz = /bits/ 64 <1286400000>;
opp-peak-kBps = <4068000 11980800>;
};
cpu4_opp14: opp-1363200000 {
opp-hz = /bits/ 64 <1363200000>;
opp-peak-kBps = <4068000 15052800>;
};
cpu4_opp15: opp-1459200000 {
opp-hz = /bits/ 64 <1459200000>;
opp-peak-kBps = <4068000 15052800>;
};
cpu4_opp16: opp-1536000000 {
opp-hz = /bits/ 64 <1536000000>;
opp-peak-kBps = <5412000 15052800>;
};
cpu4_opp17: opp-1612800000 {
opp-hz = /bits/ 64 <1612800000>;
opp-peak-kBps = <5412000 15052800>;
};
cpu4_opp18: opp-1689600000 {
opp-hz = /bits/ 64 <1689600000>;
opp-peak-kBps = <5412000 19353600>;
};
cpu4_opp19: opp-1766400000 {
opp-hz = /bits/ 64 <1766400000>;
opp-peak-kBps = <6220000 19353600>;
};
cpu4_opp20: opp-1843200000 {
opp-hz = /bits/ 64 <1843200000>;
opp-peak-kBps = <6220000 19353600>;
};
cpu4_opp21: opp-1920000000 {
opp-hz = /bits/ 64 <1920000000>;
opp-peak-kBps = <7216000 19353600>;
};
cpu4_opp22: opp-1996800000 {
opp-hz = /bits/ 64 <1996800000>;
opp-peak-kBps = <7216000 20889600>;
};
cpu4_opp23: opp-2092800000 {
opp-hz = /bits/ 64 <2092800000>;
opp-peak-kBps = <7216000 20889600>;
};
cpu4_opp24: opp-2169600000 {
opp-hz = /bits/ 64 <2169600000>;
opp-peak-kBps = <7216000 20889600>;
};
cpu4_opp25: opp-2246400000 {
opp-hz = /bits/ 64 <2246400000>;
opp-peak-kBps = <7216000 20889600>;
};
cpu4_opp26: opp-2323200000 {
opp-hz = /bits/ 64 <2323200000>;
opp-peak-kBps = <7216000 20889600>;
};
cpu4_opp27: opp-2400000000 {
opp-hz = /bits/ 64 <2400000000>;
opp-peak-kBps = <7216000 22425600>;
};
cpu4_opp28: opp-2476800000 {
opp-hz = /bits/ 64 <2476800000>;
opp-peak-kBps = <7216000 22425600>;
};
cpu4_opp29: opp-2553600000 {
opp-hz = /bits/ 64 <2553600000>;
opp-peak-kBps = <7216000 22425600>;
};
cpu4_opp30: opp-2649600000 {
opp-hz = /bits/ 64 <2649600000>;
opp-peak-kBps = <7216000 22425600>;
};
cpu4_opp31: opp-2745600000 {
opp-hz = /bits/ 64 <2745600000>;
opp-peak-kBps = <7216000 25497600>;
};
cpu4_opp32: opp-2803200000 {
opp-hz = /bits/ 64 <2803200000>;
opp-peak-kBps = <7216000 25497600>;
};
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
@ -805,6 +1090,25 @@ rng: rng@793000 {
clock-names = "core";
};
qup_opp_table: qup-opp-table {
compatible = "operating-points-v2";
opp-19200000 {
opp-hz = /bits/ 64 <19200000>;
required-opps = <&rpmhpd_opp_min_svs>;
};
opp-75000000 {
opp-hz = /bits/ 64 <75000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_svs>;
};
};
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x008c0000 0 0x6000>;
@ -826,6 +1130,8 @@ i2c0: i2c@880000 {
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -850,6 +1156,8 @@ uart0: serial@880000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -863,6 +1171,8 @@ i2c1: i2c@884000 {
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -887,6 +1197,8 @@ uart1: serial@884000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -900,6 +1212,8 @@ i2c2: i2c@888000 {
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -924,6 +1238,8 @@ uart2: serial@888000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -937,6 +1253,8 @@ i2c3: i2c@88c000 {
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -961,6 +1279,8 @@ uart3: serial@88c000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -974,6 +1294,8 @@ i2c4: i2c@890000 {
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -998,6 +1320,8 @@ uart4: serial@890000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1011,6 +1335,8 @@ i2c5: i2c@894000 {
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1035,6 +1361,8 @@ uart5: serial@894000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1048,6 +1376,8 @@ i2c6: i2c@898000 {
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1072,6 +1402,8 @@ uart6: serial@898000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart6_default>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1085,6 +1417,8 @@ i2c7: i2c@89c000 {
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1109,6 +1443,8 @@ uart7: serial@89c000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_default>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
};
@ -1134,6 +1470,8 @@ i2c8: i2c@a80000 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1158,6 +1496,8 @@ uart8: serial@a80000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart8_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1171,6 +1511,8 @@ i2c9: i2c@a84000 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1195,6 +1537,8 @@ uart9: serial@a84000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart9_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1208,6 +1552,8 @@ i2c10: i2c@a88000 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1232,6 +1578,8 @@ uart10: serial@a88000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart10_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1245,6 +1593,8 @@ i2c11: i2c@a8c000 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1269,6 +1619,8 @@ uart11: serial@a8c000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart11_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1282,6 +1634,8 @@ i2c12: i2c@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1306,6 +1660,8 @@ uart12: serial@a90000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart12_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1319,6 +1675,8 @@ i2c13: i2c@a94000 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1343,6 +1701,8 @@ uart13: serial@a94000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart13_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1356,6 +1716,8 @@ i2c14: i2c@a98000 {
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1380,6 +1742,8 @@ uart14: serial@a98000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart14_default>;
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1393,6 +1757,8 @@ i2c15: i2c@a9c000 {
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@ -1417,6 +1783,8 @@ uart15: serial@a9c000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart15_default>;
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
};
@ -1692,7 +2060,9 @@ mmss_noc: interconnect@1740000 {
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sdm845-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
reg = <0 0x01d84000 0 0x2500>;
reg = <0 0x01d84000 0 0x2500>,
<0 0x01d90000 0 0x8000>;
reg-names = "std", "ice";
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
phys = <&ufs_mem_phy_lanes>;
phy-names = "ufsphy";
@ -1712,7 +2082,8 @@ ufs_mem_hc: ufshc@1d84000 {
"ref_clk",
"tx_lane0_sync_clk",
"rx_lane0_sync_clk",
"rx_lane1_sync_clk";
"rx_lane1_sync_clk",
"ice_core_clk";
clocks =
<&gcc GCC_UFS_PHY_AXI_CLK>,
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
@ -1721,7 +2092,8 @@ ufs_mem_hc: ufshc@1d84000 {
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
freq-table-hz =
<50000000 200000000>,
<0 0>,
@ -1730,7 +2102,8 @@ ufs_mem_hc: ufshc@1d84000 {
<0 0>,
<0 0>,
<0 0>,
<0 0>;
<0 0>,
<0 300000000>;
status = "disabled";
};
@ -2911,8 +3284,58 @@ sdhc_2: sdhci@8804000 {
<&gcc GCC_SDCC2_APPS_CLK>;
clock-names = "iface", "core";
iommus = <&apps_smmu 0xa0 0xf>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&sdhc2_opp_table>;
status = "disabled";
sdhc2_opp_table: sdhc2-opp-table {
compatible = "operating-points-v2";
opp-9600000 {
opp-hz = /bits/ 64 <9600000>;
required-opps = <&rpmhpd_opp_min_svs>;
};
opp-19200000 {
opp-hz = /bits/ 64 <19200000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-201500000 {
opp-hz = /bits/ 64 <201500000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
};
};
qspi_opp_table: qspi-opp-table {
compatible = "operating-points-v2";
opp-19200000 {
opp-hz = /bits/ 64 <19200000>;
required-opps = <&rpmhpd_opp_min_svs>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-150000000 {
opp-hz = /bits/ 64 <150000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
qspi: spi@88df000 {
@ -2924,6 +3347,8 @@ qspi: spi@88df000 {
clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
<&gcc GCC_QSPI_CORE_CLK>;
clock-names = "iface", "core";
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qspi_opp_table>;
status = "disabled";
};
@ -3296,6 +3721,35 @@ clock_camcc: clock-controller@ad00000 {
#power-domain-cells = <1>;
};
dsi_opp_table: dsi-opp-table {
compatible = "operating-points-v2";
opp-19200000 {
opp-hz = /bits/ 64 <19200000>;
required-opps = <&rpmhpd_opp_min_svs>;
};
opp-180000000 {
opp-hz = /bits/ 64 <180000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-275000000 {
opp-hz = /bits/ 64 <275000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-328580000 {
opp-hz = /bits/ 64 <328580000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-358000000 {
opp-hz = /bits/ 64 <358000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
mdss: mdss@ae00000 {
compatible = "qcom,sdm845-mdss";
reg = <0 0x0ae00000 0 0x1000>;
@ -3340,6 +3794,8 @@ mdss_mdp: mdp@ae01000 {
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
assigned-clock-rates = <300000000>,
<19200000>;
operating-points-v2 = <&mdp_opp_table>;
power-domains = <&rpmhpd SDM845_CX>;
interrupt-parent = <&mdss>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
@ -3364,6 +3820,30 @@ dpu_intf2_out: endpoint {
};
};
};
mdp_opp_table: mdp-opp-table {
compatible = "operating-points-v2";
opp-19200000 {
opp-hz = /bits/ 64 <19200000>;
required-opps = <&rpmhpd_opp_min_svs>;
};
opp-171428571 {
opp-hz = /bits/ 64 <171428571>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-344000000 {
opp-hz = /bits/ 64 <344000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-430000000 {
opp-hz = /bits/ 64 <430000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
dsi0: dsi@ae94000 {
@ -3386,6 +3866,8 @@ dsi0: dsi@ae94000 {
"core",
"iface",
"bus";
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmhpd SDM845_CX>;
phys = <&dsi0_phy>;
phy-names = "dsi";
@ -3450,6 +3932,8 @@ dsi1: dsi@ae96000 {
"core",
"iface",
"bus";
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmhpd SDM845_CX>;
phys = <&dsi1_phy>;
phy-names = "dsi";
@ -3724,6 +4208,21 @@ spmi_bus: spmi@c440000 {
cell-index = <0>;
};
imem@146bf000 {
compatible = "simple-mfd";
reg = <0 0x146bf000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x146bf000 0x1000>;
pil-reloc@94c {
compatible = "qcom,pil-reloc-info";
reg = <0x94c 0xc8>;
};
};
apps_smmu: iommu@15000000 {
compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
reg = <0 0x15000000 0 0x80000>;

21
arch/arm64/boot/dts/qcom/sm8150-mtp.dts
View File

@ -408,3 +408,24 @@ &ufs_mem_phy {
vdda-pll-supply = <&vreg_l3c_1p2>;
vdda-pll-max-microamp = <19000>;
};
&usb_1_hsphy {
status = "okay";
vdda-pll-supply = <&vdd_usb_hs_core>;
vdda33-supply = <&vdda_usb_hs_3p1>;
vdda18-supply = <&vdda_usb_hs_1p8>;
};
&usb_1_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l3c_1p2>;
vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
};
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "peripheral";
};

903
arch/arm64/boot/dts/qcom/sm8150.dtsi
View File

@ -10,6 +10,7 @@
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,gcc-sm8150.h>
#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
@ -46,6 +47,7 @@ CPU0: cpu@0 {
enable-method = "psci";
next-level-cache = <&L2_0>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
L2_0: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@ -62,6 +64,7 @@ CPU1: cpu@100 {
enable-method = "psci";
next-level-cache = <&L2_100>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
L2_100: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@ -76,6 +79,7 @@ CPU2: cpu@200 {
enable-method = "psci";
next-level-cache = <&L2_200>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
L2_200: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@ -89,6 +93,7 @@ CPU3: cpu@300 {
enable-method = "psci";
next-level-cache = <&L2_300>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
L2_300: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@ -102,6 +107,7 @@ CPU4: cpu@400 {
enable-method = "psci";
next-level-cache = <&L2_400>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
L2_400: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@ -115,6 +121,7 @@ CPU5: cpu@500 {
enable-method = "psci";
next-level-cache = <&L2_500>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
L2_500: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@ -128,6 +135,7 @@ CPU6: cpu@600 {
enable-method = "psci";
next-level-cache = <&L2_600>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
L2_600: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@ -141,6 +149,7 @@ CPU7: cpu@700 {
enable-method = "psci";
next-level-cache = <&L2_700>;
qcom,freq-domain = <&cpufreq_hw 2>;
#cooling-cells = <2>;
L2_700: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@ -621,6 +630,98 @@ glink-edge {
};
};
usb_1_hsphy: phy@88e2000 {
compatible = "qcom,sm8150-usb-hs-phy",
"qcom,usb-snps-hs-7nm-phy";
reg = <0 0x088e2000 0 0x400>;
status = "disabled";
#phy-cells = <0>;
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "ref";
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
};
usb_1_qmpphy: phy@88e9000 {
compatible = "qcom,sm8150-qmp-usb3-phy";
reg = <0 0x088e9000 0 0x18c>,
<0 0x088e8000 0 0x10>;
reg-names = "reg-base", "dp_com";
status = "disabled";
#clock-cells = <1>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
clock-names = "aux", "ref_clk_src", "ref", "com_aux";
resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
<&gcc GCC_USB3_PHY_PRIM_BCR>;
reset-names = "phy", "common";
usb_1_ssphy: lanes@88e9200 {
reg = <0 0x088e9200 0 0x200>,
<0 0x088e9400 0 0x200>,
<0 0x088e9c00 0 0x218>,
<0 0x088e9600 0 0x200>,
<0 0x088e9800 0 0x200>,
<0 0x088e9a00 0 0x100>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb3_phy_pipe_clk_src";
};
};
usb_1: usb@a6f8800 {
compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
ranges;
dma-ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_SLEEP_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_CLK>;
clock-names = "cfg_noc", "core", "iface", "mock_utmi",
"sleep", "xo";
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
resets = <&gcc GCC_USB30_PRIM_BCR>;
usb_1_dwc3: dwc3@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
aoss_qmp: power-controller@c300000 {
compatible = "qcom,sm8150-aoss-qmp";
reg = <0x0 0x0c300000 0x0 0x100000>;
@ -631,6 +732,28 @@ aoss_qmp: power-controller@c300000 {
#power-domain-cells = <1>;
};
tsens0: thermal-sensor@c263000 {
compatible = "qcom,sm8150-tsens", "qcom,tsens-v2";
reg = <0 0x0c263000 0 0x1ff>, /* TM */
<0 0x0c222000 0 0x1ff>; /* SROT */
#qcom,sensors = <16>;
interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
tsens1: thermal-sensor@c265000 {
compatible = "qcom,sm8150-tsens", "qcom,tsens-v2";
reg = <0 0x0c265000 0 0x1ff>, /* TM */
<0 0x0c223000 0 0x1ff>; /* SROT */
#qcom,sensors = <8>;
interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0 0x0c440000 0x0 0x0001100>,
@ -864,4 +987,784 @@ timer {
<GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
};
thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 1>;
trips {
cpu0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu0_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu0_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 2>;
trips {
cpu1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu1_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu1_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu1_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu1_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 3>;
trips {
cpu2_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu2_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu2_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu2_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu2_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 4>;
trips {
cpu3_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu3_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu3_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu3_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu3_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu4-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 7>;
trips {
cpu4_top_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu4_top_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu4_top_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu4_top_alert0>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu4_top_alert1>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu5-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 8>;
trips {
cpu5_top_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu5_top_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu5_top_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu5_top_alert0>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu5_top_alert1>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu6-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 9>;
trips {
cpu6_top_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu6_top_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu6_top_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu6_top_alert0>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu6_top_alert1>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu7-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 10>;
trips {
cpu7_top_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_top_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_top_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu7_top_alert0>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu7_top_alert1>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu4-bottom-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 11>;
trips {
cpu4_bottom_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu4_bottom_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu4_bottom_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu4_bottom_alert0>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu4_bottom_alert1>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu5-bottom-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 12>;
trips {
cpu5_bottom_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu5_bottom_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu5_bottom_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu5_bottom_alert0>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu5_bottom_alert1>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu6-bottom-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 13>;
trips {
cpu6_bottom_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu6_bottom_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu6_bottom_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu6_bottom_alert0>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu6_bottom_alert1>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu7-bottom-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 14>;
trips {
cpu7_bottom_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_bottom_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_bottom_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu7_bottom_alert0>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu7_bottom_alert1>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
aoss0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 0>;
trips {
aoss0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
cluster0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 5>;
trips {
cluster0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
cluster0_crit: cluster0_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cluster1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 6>;
trips {
cluster1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
cluster1_crit: cluster1_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
gpu-thermal-top {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 15>;
trips {
gpu1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
aoss1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 0>;
trips {
aoss1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
wlan-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 1>;
trips {
wlan_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
video-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 2>;
trips {
video_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
mem-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 3>;
trips {
mem_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
q6-hvx-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 4>;
trips {
q6_hvx_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
camera-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 5>;
trips {
camera_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
compute-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 6>;
trips {
compute_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
modem-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 7>;
trips {
modem_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
npu-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 8>;
trips {
npu_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
modem-vec-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 9>;
trips {
modem_vec_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
modem-scl-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 10>;
trips {
modem_scl_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
gpu-thermal-bottom {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 11>;
trips {
gpu2_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
};
};

30
arch/arm64/boot/dts/qcom/sm8250-mtp.dts
View File

@ -7,6 +7,10 @@
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm8250.dtsi"
#include "pm8150.dtsi"
#include "pm8150b.dtsi"
#include "pm8150l.dtsi"
#include "pm8009.dtsi"
/ {
model = "Qualcomm Technologies, Inc. SM8250 MTP";
@ -51,6 +55,11 @@ vreg_s6c_0p88: smpc6-regulator {
};
};
&adsp {
status = "okay";
firmware-name = "qcom/sm8250/adsp.mbn";
};
&apps_rsc {
pm8150-rpmh-regulators {
compatible = "qcom,pm8150-rpmh-regulators";
@ -136,13 +145,6 @@ vreg_l10a_1p8: ldo10 {
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11a_0p75: ldo11 {
regulator-name = "vreg_l11a_0p75";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12a_1p8: ldo12 {
regulator-name = "vreg_l12a_1p8";
regulator-min-microvolt = <1800000>;
@ -351,10 +353,24 @@ vreg_l7f_1p8: ldo7 {
};
};
&cdsp {
status = "okay";
firmware-name = "qcom/sm8250/cdsp.mbn";
};
&qupv3_id_1 {
status = "okay";
};
&slpi {
status = "okay";
firmware-name = "qcom/sm8250/slpi.mbn";
};
&tlmm {
gpio-reserved-ranges = <28 4>, <40 4>;
};
&uart2 {
status = "okay";
};

1551
arch/arm64/boot/dts/qcom/sm8250.dtsi
View File

File diff suppressed because it is too large Load Diff