AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-30 23:36:44 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

mvebu DT changes for v3.14 (set #2)

Browse Source 
- mvebu
     - Netgear ReadyNAS cleanup
     - add Netgear ReadyNAS 2120
 
  - kirkwood
     - Netgear ReadyNAS cleanup
     - add Netgear ReadyNAS NV+ v2
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJSo7wDAAoJEP45WPkGe8Zne+MP/iJNR0X1HK1FnLfcM5bq/dym
 JT9cfFMiIBLsLHCxayLQAG/8SwYBBbPoNjGlS2TfKNKeORM/sv6sxq08NvybOOJX
 +GGPweC4qXUzOXu4efTRnTHtrjfZe7zXDW8TUhs6TCiWV5IQP/hba3WWzk+kL1Zl
 C697b5HNsbAIo/zgiXafYoDSctyyjHWSn3vAve+RsYLWG8D0vEO8ketM1zyebLiz
 cQS8ZA8jhUK6MG3cyHzDYgCSS/OGyhne0UjAOiIn3dTC1TLr+nFkAiOjaUeCbr2a
 cR0u7iJJvmNG73pNDIDjDOScBd8eq/w7Vwmct0XmYBm9AUpy7buSaNNbS1FZRgRh
 3XJvwULcYscgFKgcB5tE+Rwi1iAYy2HVtIcHinmvk5G2Ff1GnB+ryyZy++JlO+j8
 Ft8BUIthMKPwzY3z3i7JVl+yC/ENzJddmvo5UPKJPR6Fl0wo7tIfsL9EWdZAIM4h
 sO7iZf+hkHnRnOt6iedsv7jr99K73hKMp+jfgssstlfP+44fIXbvj1hWezkJwp9J
 rHoOGnaZ5Xo6sUNsRerkTHj6EuCABeAhypcY+5V/QAqT8gyRwSeo+BiJmogF9DTd
 JX/MMjIiHNiP1ZujimPvZspo579FBxCut9+hh+Osl1ubHDM8aX4f/q+0JLYOLzGg
 cMbJ2qx9jaKFLUW51iiz
 =USMT
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt-3.14-2' of git://git.infradead.org/linux-mvebu into next/dt

From Jason Cooper:
mvebu DT changes for v3.14 (set #2)

 - mvebu
    - Netgear ReadyNAS cleanup
    - add Netgear ReadyNAS 2120

 - kirkwood
    - Netgear ReadyNAS cleanup
    - add Netgear ReadyNAS NV+ v2

* tag 'mvebu-dt-3.14-2' of git://git.infradead.org/linux-mvebu:
  ARM: kirkwood: Add support for NETGEAR ReadyNAS NV+ v2
  ARM: mvebu: Add Netgear ReadyNAS 2120 board
  ARM: mvebu: Fix whitespace in NETGEAR ReadyNAS .dts files
  ARM: mvebu: NETGEAR ReadyNAS 104 .dts cleanup
  ARM: mvebu: NETGEAR ReadyNAS 102 .dts cleanup
  ARM: kirkwood: NETGEAR ReadyNAS Duo v2 .dts cleanup

Signed-off-by: Kevin Hilman <khilman@linaro.org>
This commit is contained in:
Kevin Hilman 2013-12-10 09:21:13 -08:00
commit c69bb7bd60
6 changed files with 698 additions and 107 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/boot/dts/Makefile
View File

@ -90,6 +90,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-mplcec4.dtb \
kirkwood-mv88f6281gtw-ge.dtb \
kirkwood-netgear_readynas_duo_v2.dtb \
kirkwood-netgear_readynas_nv+_v2.dtb \
kirkwood-ns2.dtb \
kirkwood-ns2lite.dtb \
kirkwood-ns2max.dtb \
@ -114,6 +115,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-xp-axpwifiap.dtb \
armada-xp-db.dtb \
armada-xp-gp.dtb \
armada-xp-netgear-rn2120.dtb \
armada-xp-matrix.dtb \
armada-xp-openblocks-ax3-4.dtb
dtb-$(CONFIG_ARCH_MXC) += \

78
arch/arm/boot/dts/armada-370-netgear-rn102.dts
View File

@ -11,6 +11,8 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "armada-370.dtsi"
/ {
@ -62,6 +64,7 @@ power_led_pin: power-led-pin {
marvell,pins = "mpp57";
marvell,function = "gpio";
};
sata1_led_pin: sata1-led-pin {
marvell,pins = "mpp15";
marvell,function = "gpio";
@ -77,6 +80,21 @@ backup_led_pin: backup-led-pin {
marvell,function = "gpio";
};
backup_button_pin: backup-button-pin {
marvell,pins = "mpp58";
marvell,function = "gpio";
};
power_button_pin: power-button-pin {
marvell,pins = "mpp62";
marvell,function = "gpio";
};
reset_button_pin: reset-button-pin {
marvell,pins = "mpp6";
marvell,function = "gpio";
};
poweroff: poweroff {
marvell,pins = "mpp8";
marvell,function = "gpio";
@ -84,7 +102,7 @@ poweroff: poweroff {
};
mdio {
phy0: ethernet-phy@0 {
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
reg = <0>;
};
};
@ -117,78 +135,76 @@ g762: g762@3e {
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
g762_clk: fixedclk {
g762_clk: g762-oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <8192>;
};
};
gpio_leds {
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = < &power_led_pin
pinctrl-0 = <&power_led_pin
&sata1_led_pin
&sata2_led_pin
&backup_led_pin >;
&backup_led_pin>;
pinctrl-names = "default";
blue_power_led {
blue-power-led {
label = "rn102:blue:pwr";
gpios = <&gpio1 25 1>; /* GPIO 57 Active Low */
gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
green_sata1_led {
green-sata1-led {
label = "rn102:green:sata1";
gpios = <&gpio0 15 1>; /* GPIO 15 Active Low */
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
default-state = "on";
};
green_sata2_led {
green-sata2-led {
label = "rn102:green:sata2";
gpios = <&gpio0 14 1>; /* GPIO 14 Active Low */
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
green_backup_led {
green-backup-led {
label = "rn102:green:backup";
gpios = <&gpio1 24 1>; /* GPIO 56 Active Low */
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
gpio_keys {
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&power_button_pin
&reset_button_pin
&backup_button_pin>;
pinctrl-names = "default";
button@1 {
power-button {
label = "Power Button";
linux,code = <116>; /* KEY_POWER */
gpios = <&gpio1 30 0>;
linux,code = <KEY_POWER>;
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
};
button@2 {
reset-button {
label = "Reset Button";
linux,code = <0x198>; /* KEY_RESTART */
gpios = <&gpio0 6 1>;
linux,code = <KEY_RESTART>;
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
button@3 {
backup-button {
label = "Backup Button";
linux,code = <133>; /* KEY_COPY */
gpios = <&gpio1 26 1>;
linux,code = <KEY_COPY>;
gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
};
};
gpio_poweroff {
gpio-poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&poweroff>;
pinctrl-names = "default";
gpios = <&gpio0 8 1>;
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
};

68
arch/arm/boot/dts/armada-370-netgear-rn104.dts
View File

@ -11,8 +11,9 @@
/dts-v1/;
#include "armada-370.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "armada-370.dtsi"
/ {
model = "NETGEAR ReadyNAS 104";
@ -59,12 +60,12 @@ poweroff: poweroff {
marvell,function = "gpio";
};
backup_key_pin: backup-key-pin {
backup_button_pin: backup-button-pin {
marvell,pins = "mpp52";
marvell,function = "gpio";
};
power_key_pin: power-key-pin {
power_button_pin: power-button-pin {
marvell,pins = "mpp62";
marvell,function = "gpio";
};
@ -79,18 +80,18 @@ power_led_pin: power-led-pin {
marvell,function = "gpio";
};
reset_key_pin: reset-key-pin {
reset_button_pin: reset-button-pin {
marvell,pins = "mpp65";
marvell,function = "gpio";
};
};
mdio {
phy0: ethernet-phy@0 {
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
reg = <0>;
};
phy1: ethernet-phy@1 {
phy1: ethernet-phy@1 { /* Marvell 88E1318 */
reg = <1>;
};
};
@ -136,90 +137,85 @@ pca9554: pca9554@23 {
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
g762_clk: fixedclk {
g762_clk: g762-oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <8192>;
};
};
gpio_leds {
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&backup_led_pin &power_led_pin>;
pinctrl-names = "default";
blue_backup_led {
blue-backup-led {
label = "rn104:blue:backup";
gpios = <&gpio1 31 0>; /* GPIO 63 Active High */
gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
blue_power_led {
blue-power-led {
label = "rn104:blue:pwr";
gpios = <&gpio2 0 1>; /* GPIO 64 Active Low */
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "keep";
};
sata1_led {
blue-sata1-led {
label = "rn104:blue:sata1";
gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
default-state = "off";
};
sata2_led {
blue-sata2-led {
label = "rn104:blue:sata2";
gpios = <&pca9554 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
sata3_led {
blue-sata3-led {
label = "rn104:blue:sata3";
gpios = <&pca9554 2 GPIO_ACTIVE_LOW>;
default-state = "off";
};
sata4_led {
blue-sata4-led {
label = "rn104:blue:sata4";
gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
gpio_keys {
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&backup_key_pin
&power_key_pin
&reset_key_pin>;
pinctrl-0 = <&backup_button_pin
&power_button_pin
&reset_button_pin>;
pinctrl-names = "default";
button@1 {
backup-button {
label = "Backup Button";
linux,code = <133>; /* KEY_COPY */
gpios = <&gpio1 20 1>;
linux,code = <KEY_COPY>;
gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
};
button@2 {
power-button {
label = "Power Button";
linux,code = <116>; /* KEY_POWER */
gpios = <&gpio1 30 0>;
linux,code = <KEY_POWER>;
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
};
button@3 {
reset-button {
label = "Reset Button";
linux,code = <0x198>; /* KEY_RESTART */
gpios = <&gpio2 1 1>;
linux,code = <KEY_RESTART>;
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
};
};
gpio_poweroff {
gpio-poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&poweroff>;
pinctrl-names = "default";
gpios = <&gpio1 28 1>;
gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
};
};

286
arch/arm/boot/dts/armada-xp-netgear-rn2120.dts Normal file
View File

@ -0,0 +1,286 @@
/*
* Device Tree file for NETGEAR ReadyNAS 2120
*
* Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "armada-xp-mv78230.dtsi"
/ {
model = "NETGEAR ReadyNAS 2120";
compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
device_type = "memory";
reg = <0 0x00000000 0 0x80000000>; /* 2GB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
pcie-controller {
status = "okay";
/* Connected to first Marvell 88SE9170 SATA controller */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
/* Connected to second Marvell 88SE9170 SATA controller */
pcie@2,0 {
/* Port 0, Lane 1 */
status = "okay";
};
/* Connected to Fresco Logic FL1009 USB 3.0 controller */
pcie@5,0 {
/* Port 1, Lane 0 */
status = "okay";
};
};
internal-regs {
pinctrl {
poweroff: poweroff {
marvell,pins = "mpp42";
marvell,function = "gpio";
};
power_button_pin: power-button-pin {
marvell,pins = "mpp27";
marvell,function = "gpio";
};
reset_button_pin: reset-button-pin {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
sata1_led_pin: sata1-led-pin {
marvell,pins = "mpp31";
marvell,function = "gpio";
};
sata2_led_pin: sata2-led-pin {
marvell,pins = "mpp40";
marvell,function = "gpio";
};
sata3_led_pin: sata3-led-pin {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
sata4_led_pin: sata4-led-pin {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
sata1_power_pin: sata1-power-pin {
marvell,pins = "mpp24";
marvell,function = "gpio";
};
sata2_power_pin: sata2-power-pin {
marvell,pins = "mpp25";
marvell,function = "gpio";
};
sata3_power_pin: sata3-power-pin {
marvell,pins = "mpp26";
marvell,function = "gpio";
};
sata4_power_pin: sata4-power-pin {
marvell,pins = "mpp28";
marvell,function = "gpio";
};
sata1_pres_pin: sata1-pres-pin {
marvell,pins = "mpp32";
marvell,function = "gpio";
};
sata2_pres_pin: sata2-pres-pin {
marvell,pins = "mpp33";
marvell,function = "gpio";
};
sata3_pres_pin: sata3-pres-pin {
marvell,pins = "mpp34";
marvell,function = "gpio";
};
sata4_pres_pin: sata4-pres-pin {
marvell,pins = "mpp35";
marvell,function = "gpio";
};
err_led_pin: err-led-pin {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
};
serial@12000 {
clocks = <&coreclk 0>;
status = "okay";
};
mdio {
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
reg = <0>;
};
phy1: ethernet-phy@1 { /* Marvell 88E1318 */
reg = <1>;
};
};
ethernet@70000 {
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
ethernet@74000 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
/* Front USB 2.0 port */
usb@50000 {
status = "okay";
};
i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
clock-frequency = <400000>;
status = "okay";
/* Controller for rear fan #1 of 3 (Protechnic
* MGT4012XB-O20, 8000RPM) near eSATA port */
g762_fan1: g762@3e {
compatible = "gmt,g762";
reg = <0x3e>;
clocks = <&g762_clk>; /* input clock */
fan_gear_mode = <0>;
fan_startv = <1>;
pwm_polarity = <0>;
};
/* Controller for rear (center) fan #2 of 3 */
g762_fan2: g762@48 {
compatible = "gmt,g762";
reg = <0x48>;
clocks = <&g762_clk>; /* input clock */
fan_gear_mode = <0>;
fan_startv = <1>;
pwm_polarity = <0>;
};
/* Controller for rear fan #3 of 3 */
g762_fan3: g762@49 {
compatible = "gmt,g762";
reg = <0x49>;
clocks = <&g762_clk>; /* input clock */
fan_gear_mode = <0>;
fan_startv = <1>;
pwm_polarity = <0>;
};
/* Temperature sensor */
g751: g751@4c {
compatible = "gmt,g751";
reg = <0x4c>;
};
};
};
};
clocks {
g762_clk: g762-oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin
&sata3_led_pin &sata4_led_pin>;
pinctrl-names = "default";
red-sata1-led {
label = "rn2120:red:sata1";
gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
red-sata2-led {
label = "rn2120:red:sata2";
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
red-sata3-led {
label = "rn2120:red:sata3";
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
red-sata4-led {
label = "rn2120:red:sata4";
gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
red-err-led {
label = "rn2120:red:err";
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&power_button_pin &reset_button_pin>;
pinctrl-names = "default";
power-button {
label = "Power Button";
linux,code = <KEY_POWER>;
gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
};
reset-button {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
};
gpio-poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&poweroff>;
pinctrl-names = "default";
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
};

69
arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
View File

@ -1,5 +1,17 @@
/*
* Device Tree file for NETGEAR ReadyNAS Duo v2
*
* Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "kirkwood.dtsi"
#include "kirkwood-6282.dtsi"
@ -33,34 +45,42 @@ pmx_button_power: pmx-button-power {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
pmx_button_backup: pmx-button-backup {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
pmx_button_reset: pmx-button-reset {
marvell,pins = "mpp13";
marvell,function = "gpio";
};
pmx_led_blue_power: pmx-led-blue-power {
marvell,pins = "mpp31";
marvell,function = "gpio";
};
pmx_led_blue_activity: pmx-led-blue-activity {
marvell,pins = "mpp38";
marvell,function = "gpio";
};
pmx_led_blue_disk1: pmx-led-blue-disk1 {
marvell,pins = "mpp23";
marvell,function = "gpio";
};
pmx_led_blue_disk2: pmx-led-blue-disk2 {
marvell,pins = "mpp22";
marvell,function = "gpio";
};
pmx_led_blue_backup: pmx-led-blue-backup {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_poweroff: pmx-poweroff {
marvell,pins = "mpp30";
marvell,function = "gpio";
@ -68,10 +88,7 @@ pmx_poweroff: pmx-poweroff {
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
g762_clk: fixedclk {
g762_clk: g762-oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <8192>;
@ -117,49 +134,53 @@ &pmx_led_blue_disk1 &pmx_led_blue_disk2
power_led {
label = "status:blue:power_led";
gpios = <&gpio0 31 1>; /* GPIO 31 Active Low */
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
activity_led {
label = "status:blue:activity_led";
gpios = <&gpio1 6 1>; /* GPIO 38 Active Low */
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
};
disk1_led {
label = "status:blue:disk1_led";
gpios = <&gpio0 23 1>; /* GPIO 23 Active Low */
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
};
disk2_led {
label = "status:blue:disk2_led";
gpios = <&gpio0 22 1>; /* GPIO 22 Active Low */
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
};
backup_led {
label = "status:blue:backup_led";
gpios = <&gpio0 29 1>; /* GPIO 29 Active Low*/
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
};
gpio_keys {
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_button_power &pmx_button_backup
&pmx_button_reset>;
pinctrl-names = "default";
button@1 {
power-button {
label = "Power Button";
linux,code = <116>; /* KEY_POWER */
gpios = <&gpio1 15 1>;
linux,code = <KEY_POWER>;
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
button@2 {
reset-button {
label = "Reset Button";
linux,code = <0x198>; /* KEY_RESTART */
gpios = <&gpio0 13 1>;
linux,code = <KEY_RESTART>;
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
button@3 {
backup-button {
label = "Backup Button";
linux,code = <133>; /* KEY_COPY */
gpios = <&gpio1 13 1>;
linux,code = <KEY_COPY>;
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
};
};
@ -175,7 +196,7 @@ regulators {
#address-cells = <1>;
#size-cells = <0>;
usb_power: regulator@1 {
usb3_regulator: usb3-regulator {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB 3.0 Power";
@ -184,7 +205,7 @@ usb_power: regulator@1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 14 0>;
gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
};
};
@ -222,7 +243,7 @@ partition@1800000 {
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
device_type = "ethernet-phy";
reg = <0>;
};

270
arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts Normal file
View File

@ -0,0 +1,270 @@
/*
* Device Tree file for NETGEAR ReadyNAS NV+ v2
*
* Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "kirkwood.dtsi"
#include "kirkwood-6282.dtsi"
/ {
model = "NETGEAR ReadyNAS NV+ v2";
compatible = "netgear,readynas-nv+-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood";
memory { /* 256 MB */
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
mbus {
pcie-controller {
status = "okay";
/* Connected to NEC uPD720200 USB 3.0 controller */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
};
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pmx_button_power: pmx-button-power {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
pmx_button_backup: pmx-button-backup {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
pmx_button_reset: pmx-button-reset {
marvell,pins = "mpp13";
marvell,function = "gpio";
};
pmx_led_blue_power: pmx-led-blue-power {
marvell,pins = "mpp31";
marvell,function = "gpio";
};
pmx_led_blue_backup: pmx-led-blue-backup {
marvell,pins = "mpp22";
marvell,function = "gpio";
};
pmx_led_blue_disk1: pmx-led-blue-disk1 {
marvell,pins = "mpp20";
marvell,function = "gpio";
};
pmx_led_blue_disk2: pmx-led-blue-disk2 {
marvell,pins = "mpp23";
marvell,function = "gpio";
};
pmx_led_blue_disk3: pmx-led-blue-disk3 {
marvell,pins = "mpp24";
marvell,function = "gpio";
};
pmx_led_blue_disk4: pmx-led-blue-disk4 {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_poweroff: pmx-poweroff {
marvell,pins = "mpp30";
marvell,function = "gpio";
};
};
clocks {
g762_clk: g762-oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <8192>;
};
};
i2c@11000 {
status = "okay";
rs5c372a: rs5c372a@32 {
compatible = "ricoh,rs5c372a";
reg = <0x32>;
};
g762: g762@3e {
compatible = "gmt,g762";
reg = <0x3e>;
clocks = <&g762_clk>; /* input clock */
fan_gear_mode = <0>;
fan_startv = <1>;
pwm_polarity = <0>;
};
};
serial@12000 {
pinctrl-0 = <&pmx_uart0>;
pinctrl-names = "default";
status = "okay";
};
sata@80000 { /* Connected to Marvell 88SM4140 SATA port multiplier */
status = "okay";
nr-ports = <1>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_backup
&pmx_led_blue_disk1 &pmx_led_blue_disk2
&pmx_led_blue_disk3 &pmx_led_blue_disk3 >;
pinctrl-names = "default";
power_led {
label = "status:blue:power_led";
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
backup_led {
label = "status:blue:backup_led";
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
};
disk1_led {
label = "status:blue:disk1_led";
gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
};
disk2_led {
label = "status:blue:disk2_led";
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
};
disk3_led {
label = "status:blue:disk3_led";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
disk4_led {
label = "status:blue:disk4_led";
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&pmx_button_power &pmx_button_backup
&pmx_button_reset>;
pinctrl-names = "default";
power-button {
label = "Power Button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
reset-button {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
backup-button {
label = "Backup Button";
linux,code = <KEY_COPY>;
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
};
};
gpio-poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&pmx_poweroff>;
pinctrl-names = "default";
gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
usb3_regulator: usb3-regulator {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB 3.0 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
};
};
&nand {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x180000>;
read-only;
};
partition@180000 {
label = "u-boot-env";
reg = <0x180000 0x20000>;
};
partition@200000 {
label = "uImage";
reg = <0x0200000 0x600000>;
};
partition@800000 {
label = "minirootfs";
reg = <0x0800000 0x1000000>;
};
partition@1800000 {
label = "jffs2";
reg = <0x1800000 0x6800000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
device_type = "ethernet-phy";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};