dt: binding: Add Qualcomm WCNSS control binding

This binding describes the control interface for the Qualcomm WCNSS. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2024-11-30 11:16:48 +07:00 · 2016-06-06 16:58:19 -07:00 · 2016-06-06 16:58:19 -07:00 · c49e9e95f4
commit c49e9e95f4
parent 9e5d41d440
1 changed files with 116 additions and 0 deletions
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
@ -0,0 +1,116 @@
+Qualcomm WCNSS Binding
+
+This binding describes the Qualcomm WCNSS hardware. It consists of control
+block and a BT, WiFi and FM radio block, all using SMD as command channels.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be: "qcom,wcnss",
+
+- qcom,smd-channel:
+	Usage: required
+	Value type: <string>
+	Definition: standard SMD property specifying the SMD channel used for
+		    communication with the WiFi firmware.
+		    Should be "WCNSS_CTRL".
+
+- qcom,mmio:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to a node specifying the wcnss "ccu" and "dxe"
+		    register blocks. The node must be compatible with one of
+		    the following:
+		    "qcom,riva",
+		    "qcom,pronto"
+
+= SUBNODES
+The subnodes of the wcnss node are optional and describe the individual blocks in
+the WCNSS.
+
+== Bluetooth
+The following properties are defined to the bluetooth node:
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be:
+		    "qcom,wcnss-bt"
+
+== WiFi
+The following properties are defined to the WiFi node:
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,wcnss-wlan",
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the "rx" and "tx" interrupts
+
+- interrupt-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must contain "rx" and "tx"
+
+- qcom,smem-state:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should reference the tx-enable and tx-rings-empty SMEM states
+
+- qcom,smem-state-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must contain "tx-enable" and "tx-rings-empty"
+
+= EXAMPLE
+The following example represents a SMD node, with one edge representing the
+"pronto" subsystem, with the wcnss device and its wcn3680 BT and WiFi blocks
+described; as found on the 8974 platform.
+
+smd {
+	compatible = "qcom,smd";
+
+	pronto-edge {
+		interrupts = <0 142 1>;
+
+		qcom,ipc = <&apcs 8 17>;
+		qcom,smd-edge = <6>;
+
+		wcnss {
+			compatible = "qcom,wcnss";
+			qcom,smd-channels = "WCNSS_CTRL";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qcom,mmio = <&pronto>;
+
+			bt {
+				compatible = "qcom,wcnss-bt";
+			};
+
+			wlan {
+				compatible = "qcom,wcnss-wlan";
+
+				interrupts = <0 145 0>, <0 146 0>;
+				interrupt-names = "tx", "rx";
+
+				qcom,smem-state = <&apps_smsm 10>, <&apps_smsm 9>;
+				qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+			};
+		};
+	};
+};
+
+soc {
+	pronto: pronto {
+		compatible = "qcom,pronto";
+
+		reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
+		reg-names = "ccu", "dxe", "pmu";
+	};
+};