b43: PHY: drop is_40mhz (get width info from chandef)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Rafał Miłecki 2014-05-31 20:49:40 +02:00 committed by John W. Linville
parent 39e971ef1b
commit bee6d4b272
4 changed files with 33 additions and 35 deletions

View File

@ -3810,11 +3810,6 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
phy->chandef = &conf->chandef;
phy->channel = conf->chandef.chan->hw_value;
if (conf_is_ht(conf))
phy->is_40mhz = conf_is_ht40_minus(conf) ||
conf_is_ht40_plus(conf);
else
phy->is_40mhz = false;
/* Switch the band (if necessary). */
err = b43_switch_band(dev, conf->chandef.chan);

View File

@ -553,6 +553,11 @@ bool b43_channel_type_is_40mhz(enum nl80211_channel_type channel_type)
channel_type == NL80211_CHAN_HT40PLUS);
}
bool b43_is_40mhz(struct b43_wldev *dev)
{
return dev->phy.chandef->width == NL80211_CHAN_WIDTH_40;
}
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BmacPhyClkFgc */
void b43_phy_force_clock(struct b43_wldev *dev, bool force)
{

View File

@ -228,9 +228,6 @@ struct b43_phy {
bool supports_2ghz;
bool supports_5ghz;
/* HT info */
bool is_40mhz;
/* Is GMODE (2 GHz mode) bit enabled? */
bool gmode;
@ -452,6 +449,8 @@ void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on);
bool b43_channel_type_is_40mhz(enum nl80211_channel_type channel_type);
bool b43_is_40mhz(struct b43_wldev *dev);
void b43_phy_force_clock(struct b43_wldev *dev, bool force);
struct b43_c32 b43_cordic(int theta);

View File

@ -896,7 +896,7 @@ static void b43_radio_2056_setup(struct b43_wldev *dev,
offset | B2056_TX_MIXG_BOOST_TUNE,
mixg_boost);
} else {
bias = dev->phy.is_40mhz ? 0x40 : 0x20;
bias = b43_is_40mhz(dev) ? 0x40 : 0x20;
b43_radio_write(dev,
offset | B2056_TX_INTPAG_IMAIN_STAT,
bias);
@ -1211,8 +1211,7 @@ static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
u16 bw, len, rot, angle;
struct b43_c32 *samples;
bw = (dev->phy.is_40mhz) ? 40 : 20;
bw = b43_is_40mhz(dev) ? 40 : 20;
len = bw << 3;
if (test) {
@ -1221,7 +1220,7 @@ static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
else
bw = 80;
if (dev->phy.is_40mhz)
if (b43_is_40mhz(dev))
bw <<= 1;
len = bw << 1;
@ -1264,7 +1263,7 @@ static void b43_nphy_run_samples(struct b43_wldev *dev, u16 samps, u16 loops,
}
/* TODO: add modify_bbmult argument */
if (!dev->phy.is_40mhz)
if (!b43_is_40mhz(dev))
tmp = 0x6464;
else
tmp = 0x4747;
@ -2194,7 +2193,7 @@ static void b43_nphy_gain_ctl_workarounds_rev1_2(struct b43_wldev *dev)
b43_phy_write(dev, B43_NPHY_C1_NBCLIPTHRES, 0x84);
b43_phy_write(dev, B43_NPHY_C2_NBCLIPTHRES, 0x84);
if (!dev->phy.is_40mhz) {
if (!b43_is_40mhz(dev)) {
/* Set dwell lengths */
b43_phy_write(dev, B43_NPHY_CLIP1_NBDWELL_LEN, 0x002B);
b43_phy_write(dev, B43_NPHY_CLIP2_NBDWELL_LEN, 0x002B);
@ -2208,7 +2207,7 @@ static void b43_nphy_gain_ctl_workarounds_rev1_2(struct b43_wldev *dev)
b43_phy_maskset(dev, B43_NPHY_C2_CLIPWBTHRES,
~B43_NPHY_C2_CLIPWBTHRES_CLIP2, 21);
if (!dev->phy.is_40mhz) {
if (!b43_is_40mhz(dev)) {
b43_phy_maskset(dev, B43_NPHY_C1_CGAINI,
~B43_NPHY_C1_CGAINI_GAINBKOFF, 0x1);
b43_phy_maskset(dev, B43_NPHY_C2_CGAINI,
@ -2223,12 +2222,12 @@ static void b43_nphy_gain_ctl_workarounds_rev1_2(struct b43_wldev *dev)
if (nphy->gain_boost) {
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ &&
dev->phy.is_40mhz)
b43_is_40mhz(dev))
code = 4;
else
code = 5;
} else {
code = dev->phy.is_40mhz ? 6 : 7;
code = b43_is_40mhz(dev) ? 6 : 7;
}
/* Set HPVGA2 index */
@ -2300,7 +2299,7 @@ static void b43_nphy_gain_ctl_workarounds(struct b43_wldev *dev)
static u16 b43_nphy_read_lpf_ctl(struct b43_wldev *dev, u16 offset)
{
if (!offset)
offset = (dev->phy.is_40mhz) ? 0x159 : 0x154;
offset = b43_is_40mhz(dev) ? 0x159 : 0x154;
return b43_ntab_read(dev, B43_NTAB16(7, offset)) & 0x7;
}
@ -2373,13 +2372,13 @@ static void b43_nphy_workarounds_rev7plus(struct b43_wldev *dev)
lpf_40 = b43_nphy_read_lpf_ctl(dev, 0x159);
lpf_11b = b43_nphy_read_lpf_ctl(dev, 0x152);
if (b43_nphy_ipa(dev)) {
if ((phy->radio_rev == 5 && phy->is_40mhz) ||
if ((phy->radio_rev == 5 && b43_is_40mhz(dev)) ||
phy->radio_rev == 7 || phy->radio_rev == 8) {
bcap_val = b43_radio_read(dev, 0x16b);
scap_val = b43_radio_read(dev, 0x16a);
scap_val_11b = scap_val;
bcap_val_11b = bcap_val;
if (phy->radio_rev == 5 && phy->is_40mhz) {
if (phy->radio_rev == 5 && b43_is_40mhz(dev)) {
scap_val_11n_20 = scap_val;
bcap_val_11n_20 = bcap_val;
scap_val_11n_40 = bcap_val_11n_40 = 0xc;
@ -2521,7 +2520,7 @@ static void b43_nphy_workarounds_rev7plus(struct b43_wldev *dev)
}
}
} else if (phy->radio_rev == 7 || phy->radio_rev == 8) {
if (!phy->is_40mhz) {
if (!b43_is_40mhz(dev)) {
b43_radio_write(dev, 0x5F, 0x14);
b43_radio_write(dev, 0xE8, 0x12);
} else {
@ -2594,7 +2593,7 @@ static void b43_nphy_workarounds_rev7plus(struct b43_wldev *dev)
b43_ntab_write(dev, B43_NTAB16(7, 0x123), 0x77);
b43_ntab_write(dev, B43_NTAB16(7, 0x12A), 0x77);
if (!phy->is_40mhz) {
if (!b43_is_40mhz(dev)) {
b43_ntab_write(dev, B43_NTAB32(16, 0x03), 0x18D);
b43_ntab_write(dev, B43_NTAB32(16, 0x7F), 0x18D);
} else {
@ -2693,7 +2692,7 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
b43_phy_maskset(dev, B43_NPHY_SGILTRNOFFSET, 0xF0FF, 0x0700);
if (!dev->phy.is_40mhz) {
if (!b43_is_40mhz(dev)) {
b43_ntab_write(dev, B43_NTAB32(16, 3), 0x18D);
b43_ntab_write(dev, B43_NTAB32(16, 127), 0x18D);
} else {
@ -3116,7 +3115,7 @@ static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable)
b43_phy_maskset(dev, B43_NPHY_BPHY_CTL3,
~B43_NPHY_BPHY_CTL3_SCALE, 0x5A);
if (dev->phy.rev < 2 && dev->phy.is_40mhz)
if (dev->phy.rev < 2 && b43_is_40mhz(dev))
b43_hf_write(dev, b43_hf_read(dev) | B43_HF_TSSIRPSMW);
} else {
b43_ntab_write_bulk(dev, B43_NTAB16(26, 64), 84,
@ -3170,7 +3169,7 @@ static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable)
else if (dev->phy.rev < 2)
b43_phy_maskset(dev, B43_NPHY_BPHY_CTL3, ~0xFF, 0x40);
if (dev->phy.rev < 2 && dev->phy.is_40mhz)
if (dev->phy.rev < 2 && b43_is_40mhz(dev))
b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_TSSIRPSMW);
if (b43_nphy_ipa(dev)) {
@ -3442,21 +3441,21 @@ static void b43_nphy_tx_prepare_adjusted_power_table(struct b43_wldev *dev)
delta = 0;
switch (stf_mode) {
case 0:
if (dev->phy.is_40mhz && dev->phy.rev >= 5) {
if (b43_is_40mhz(dev) && dev->phy.rev >= 5) {
idx = 68;
} else {
delta = 1;
idx = dev->phy.is_40mhz ? 52 : 4;
idx = b43_is_40mhz(dev) ? 52 : 4;
}
break;
case 1:
idx = dev->phy.is_40mhz ? 76 : 28;
idx = b43_is_40mhz(dev) ? 76 : 28;
break;
case 2:
idx = dev->phy.is_40mhz ? 84 : 36;
idx = b43_is_40mhz(dev) ? 84 : 36;
break;
case 3:
idx = dev->phy.is_40mhz ? 92 : 44;
idx = b43_is_40mhz(dev) ? 92 : 44;
break;
}
@ -3996,7 +3995,7 @@ static void b43_nphy_spur_workaround(struct b43_wldev *dev)
if (nphy->gband_spurwar_en) {
/* TODO: N PHY Adjust Analog Pfbw (7) */
if (channel == 11 && dev->phy.is_40mhz)
if (channel == 11 && b43_is_40mhz(dev))
; /* TODO: N PHY Adjust Min Noise Var(2, tone, noise)*/
else
; /* TODO: N PHY Adjust Min Noise Var(0, NULL, NULL)*/
@ -4290,7 +4289,7 @@ static void b43_nphy_int_pa_set_tx_dig_filters(struct b43_wldev *dev)
b43_phy_write(dev, B43_PHY_N(offset[i] + j),
tbl_tx_filter_coef_rev4[i][j]);
if (dev->phy.is_40mhz) {
if (b43_is_40mhz(dev)) {
for (j = 0; j < 15; j++)
b43_phy_write(dev, B43_PHY_N(offset[0] + j),
tbl_tx_filter_coef_rev4[3][j]);
@ -4626,7 +4625,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
(dev->phy.rev == 5 && nphy->ipa2g_on &&
b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ);
if (phy6or5x) {
if (dev->phy.is_40mhz) {
if (b43_is_40mhz(dev)) {
b43_ntab_write_bulk(dev, B43_NTAB16(15, 0), 18,
tbl_tx_iqlo_cal_loft_ladder_40);
b43_ntab_write_bulk(dev, B43_NTAB16(15, 32), 18,
@ -4641,13 +4640,13 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
b43_phy_write(dev, B43_NPHY_IQLOCAL_CMDGCTL, 0x8AA9);
if (!dev->phy.is_40mhz)
if (!b43_is_40mhz(dev))
freq = 2500;
else
freq = 5000;
if (nphy->mphase_cal_phase_id > 2)
b43_nphy_run_samples(dev, (dev->phy.is_40mhz ? 40 : 20) * 8,
b43_nphy_run_samples(dev, (b43_is_40mhz(dev) ? 40 : 20) * 8,
0xFFFF, 0, true, false);
else
error = b43_nphy_tx_tone(dev, freq, 250, true, false);