From b801b1591c10f546206d4db29a31793a4e1efbbb Mon Sep 17 00:00:00 2001 From: "Mintz, Yuval" Date: Sun, 19 Mar 2017 13:08:15 +0200 Subject: [PATCH] qed: Correct default VF coalescing configuration When starting the VF's vport, the PF would first configure the status blocks of the VF and then reset them. That would cause some of the configured information to be lost - specifically it would mean that all the VFs queues would use the Rx coalescing state-machine of the status block. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_sriov.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c index aea1e4c45ead..098330e58b35 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c +++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c @@ -1755,6 +1755,8 @@ static void qed_iov_vf_mbx_start_vport(struct qed_hwfn *p_hwfn, vf->state = VF_ENABLED; start = &mbx->req_virt->start_vport; + qed_iov_enable_vf_traffic(p_hwfn, p_ptt, vf); + /* Initialize Status block in CAU */ for (sb_id = 0; sb_id < vf->num_sbs; sb_id++) { if (!start->sb_addr[sb_id]) { @@ -1768,7 +1770,6 @@ static void qed_iov_vf_mbx_start_vport(struct qed_hwfn *p_hwfn, start->sb_addr[sb_id], vf->igu_sbs[sb_id], vf->abs_vf_id, 1); } - qed_iov_enable_vf_traffic(p_hwfn, p_ptt, vf); vf->mtu = start->mtu; vf->shadow_config.inner_vlan_removal = start->inner_vlan_removal;