mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 10:06:52 +07:00
tty/serial: Add Spreadtrum sc9836-uart driver support
Add a full sc9836-uart driver for SC9836 SoC which is based on the spreadtrum sharkl64 platform. This driver also support earlycon. Originally-by: Lanqing Liu <lanqing.liu@spreadtrum.com> Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Chunyan Zhang
Greg Kroah-Hartman
parent
e570f6bca4
commit
b7396a38fb
@ -1583,6 +1583,24 @@ config SERIAL_MEN_Z135
|
||||
This driver can also be build as a module. If so, the module will be called
|
||||
men_z135_uart.ko
|
||||
|
||||
config SERIAL_SPRD
|
||||
tristate "Support for Spreadtrum serial"
|
||||
depends on ARCH_SPRD
|
||||
select SERIAL_CORE
|
||||
help
|
||||
This enables the driver for the Spreadtrum's serial.
|
||||
|
||||
config SERIAL_SPRD_CONSOLE
|
||||
bool "Spreadtrum UART console support"
|
||||
depends on SERIAL_SPRD=y
|
||||
select SERIAL_CORE_CONSOLE
|
||||
select SERIAL_EARLYCON
|
||||
help
|
||||
Support for early debug console using Spreadtrum's serial. This enables
|
||||
the console before standard serial driver is probed. This is enabled
|
||||
with "earlycon" on the kernel command line. The console is
|
||||
enabled when early_param is processed.
|
||||
|
||||
endmenu
|
||||
|
||||
config SERIAL_MCTRL_GPIO
|
||||
|
||||
@ -93,6 +93,7 @@ obj-$(CONFIG_SERIAL_RP2) += rp2.o
|
||||
obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o
|
||||
obj-$(CONFIG_SERIAL_CONEXANT_DIGICOLOR) += digicolor-usart.o
|
||||
obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o
|
||||
obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o
|
||||
|
||||
# GPIOLIB helpers for modem control lines
|
||||
obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o
|
||||
|
||||
793
drivers/tty/serial/sprd_serial.c
Normal file
793
drivers/tty/serial/sprd_serial.c
Normal file
@ -0,0 +1,793 @@
|
||||
/*
|
||||
* Copyright (C) 2012-2015 Spreadtrum Communications Inc.
|
||||
*
|
||||
* This software is licensed under the terms of the GNU General Public
|
||||
* License version 2, as published by the Free Software Foundation, and
|
||||
* may be copied, distributed, and modified under those terms.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_SERIAL_SPRD_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
|
||||
#define SUPPORT_SYSRQ
|
||||
#endif
|
||||
|
||||
#include <linux/clk.h>
|
||||
#include <linux/console.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/tty.h>
|
||||
#include <linux/tty_flip.h>
|
||||
|
||||
/* device name */
|
||||
#define UART_NR_MAX 8
|
||||
#define SPRD_TTY_NAME "ttyS"
|
||||
#define SPRD_FIFO_SIZE 128
|
||||
#define SPRD_DEF_RATE 26000000
|
||||
#define SPRD_BAUD_IO_LIMIT 3000000
|
||||
#define SPRD_TIMEOUT 256
|
||||
|
||||
/* the offset of serial registers and BITs for them */
|
||||
/* data registers */
|
||||
#define SPRD_TXD 0x0000
|
||||
#define SPRD_RXD 0x0004
|
||||
|
||||
/* line status register and its BITs */
|
||||
#define SPRD_LSR 0x0008
|
||||
#define SPRD_LSR_OE BIT(4)
|
||||
#define SPRD_LSR_FE BIT(3)
|
||||
#define SPRD_LSR_PE BIT(2)
|
||||
#define SPRD_LSR_BI BIT(7)
|
||||
#define SPRD_LSR_TX_OVER BIT(15)
|
||||
|
||||
/* data number in TX and RX fifo */
|
||||
#define SPRD_STS1 0x000C
|
||||
|
||||
/* interrupt enable register and its BITs */
|
||||
#define SPRD_IEN 0x0010
|
||||
#define SPRD_IEN_RX_FULL BIT(0)
|
||||
#define SPRD_IEN_TX_EMPTY BIT(1)
|
||||
#define SPRD_IEN_BREAK_DETECT BIT(7)
|
||||
#define SPRD_IEN_TIMEOUT BIT(13)
|
||||
|
||||
/* interrupt clear register */
|
||||
#define SPRD_ICLR 0x0014
|
||||
|
||||
/* line control register */
|
||||
#define SPRD_LCR 0x0018
|
||||
#define SPRD_LCR_STOP_1BIT 0x10
|
||||
#define SPRD_LCR_STOP_2BIT 0x30
|
||||
#define SPRD_LCR_DATA_LEN (BIT(2) | BIT(3))
|
||||
#define SPRD_LCR_DATA_LEN5 0x0
|
||||
#define SPRD_LCR_DATA_LEN6 0x4
|
||||
#define SPRD_LCR_DATA_LEN7 0x8
|
||||
#define SPRD_LCR_DATA_LEN8 0xc
|
||||
#define SPRD_LCR_PARITY (BIT(0) | BIT(1))
|
||||
#define SPRD_LCR_PARITY_EN 0x2
|
||||
#define SPRD_LCR_EVEN_PAR 0x0
|
||||
#define SPRD_LCR_ODD_PAR 0x1
|
||||
|
||||
/* control register 1 */
|
||||
#define SPRD_CTL1 0x001C
|
||||
#define RX_HW_FLOW_CTL_THLD BIT(6)
|
||||
#define RX_HW_FLOW_CTL_EN BIT(7)
|
||||
#define TX_HW_FLOW_CTL_EN BIT(8)
|
||||
#define RX_TOUT_THLD_DEF 0x3E00
|
||||
#define RX_HFC_THLD_DEF 0x40
|
||||
|
||||
/* fifo threshold register */
|
||||
#define SPRD_CTL2 0x0020
|
||||
#define THLD_TX_EMPTY 0x40
|
||||
#define THLD_RX_FULL 0x40
|
||||
|
||||
/* config baud rate register */
|
||||
#define SPRD_CLKD0 0x0024
|
||||
#define SPRD_CLKD1 0x0028
|
||||
|
||||
/* interrupt mask status register */
|
||||
#define SPRD_IMSR 0x002C
|
||||
#define SPRD_IMSR_RX_FIFO_FULL BIT(0)
|
||||
#define SPRD_IMSR_TX_FIFO_EMPTY BIT(1)
|
||||
#define SPRD_IMSR_BREAK_DETECT BIT(7)
|
||||
#define SPRD_IMSR_TIMEOUT BIT(13)
|
||||
|
||||
struct reg_backup {
|
||||
u32 ien;
|
||||
u32 ctrl0;
|
||||
u32 ctrl1;
|
||||
u32 ctrl2;
|
||||
u32 clkd0;
|
||||
u32 clkd1;
|
||||
u32 dspwait;
|
||||
};
|
||||
|
||||
struct sprd_uart_port {
|
||||
struct uart_port port;
|
||||
struct reg_backup reg_bak;
|
||||
char name[16];
|
||||
};
|
||||
|
||||
static struct sprd_uart_port *sprd_port[UART_NR_MAX];
|
||||
static int sprd_ports_num;
|
||||
|
||||
static inline unsigned int serial_in(struct uart_port *port, int offset)
|
||||
{
|
||||
return readl_relaxed(port->membase + offset);
|
||||
}
|
||||
|
||||
static inline void serial_out(struct uart_port *port, int offset, int value)
|
||||
{
|
||||
writel_relaxed(value, port->membase + offset);
|
||||
}
|
||||
|
||||
static unsigned int sprd_tx_empty(struct uart_port *port)
|
||||
{
|
||||
if (serial_in(port, SPRD_STS1) & 0xff00)
|
||||
return 0;
|
||||
else
|
||||
return TIOCSER_TEMT;
|
||||
}
|
||||
|
||||
static unsigned int sprd_get_mctrl(struct uart_port *port)
|
||||
{
|
||||
return TIOCM_DSR | TIOCM_CTS;
|
||||
}
|
||||
|
||||
static void sprd_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
||||
{
|
||||
/* nothing to do */
|
||||
}
|
||||
|
||||
static void sprd_stop_tx(struct uart_port *port)
|
||||
{
|
||||
unsigned int ien, iclr;
|
||||
|
||||
iclr = serial_in(port, SPRD_ICLR);
|
||||
ien = serial_in(port, SPRD_IEN);
|
||||
|
||||
iclr |= SPRD_IEN_TX_EMPTY;
|
||||
ien &= ~SPRD_IEN_TX_EMPTY;
|
||||
|
||||
serial_out(port, SPRD_ICLR, iclr);
|
||||
serial_out(port, SPRD_IEN, ien);
|
||||
}
|
||||
|
||||
static void sprd_start_tx(struct uart_port *port)
|
||||
{
|
||||
unsigned int ien;
|
||||
|
||||
ien = serial_in(port, SPRD_IEN);
|
||||
if (!(ien & SPRD_IEN_TX_EMPTY)) {
|
||||
ien |= SPRD_IEN_TX_EMPTY;
|
||||
serial_out(port, SPRD_IEN, ien);
|
||||
}
|
||||
}
|
||||
|
||||
static void sprd_stop_rx(struct uart_port *port)
|
||||
{
|
||||
unsigned int ien, iclr;
|
||||
|
||||
iclr = serial_in(port, SPRD_ICLR);
|
||||
ien = serial_in(port, SPRD_IEN);
|
||||
|
||||
ien &= ~(SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT);
|
||||
iclr |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT;
|
||||
|
||||
serial_out(port, SPRD_IEN, ien);
|
||||
serial_out(port, SPRD_ICLR, iclr);
|
||||
}
|
||||
|
||||
/* The Sprd serial does not support this function. */
|
||||
static void sprd_break_ctl(struct uart_port *port, int break_state)
|
||||
{
|
||||
/* nothing to do */
|
||||
}
|
||||
|
||||
static int handle_lsr_errors(struct uart_port *port,
|
||||
unsigned int *flag,
|
||||
unsigned int *lsr)
|
||||
{
|
||||
int ret = 0;
|
||||
|
||||
/* statistics */
|
||||
if (*lsr & SPRD_LSR_BI) {
|
||||
*lsr &= ~(SPRD_LSR_FE | SPRD_LSR_PE);
|
||||
port->icount.brk++;
|
||||
ret = uart_handle_break(port);
|
||||
if (ret)
|
||||
return ret;
|
||||
} else if (*lsr & SPRD_LSR_PE)
|
||||
port->icount.parity++;
|
||||
else if (*lsr & SPRD_LSR_FE)
|
||||
port->icount.frame++;
|
||||
if (*lsr & SPRD_LSR_OE)
|
||||
port->icount.overrun++;
|
||||
|
||||
/* mask off conditions which should be ignored */
|
||||
*lsr &= port->read_status_mask;
|
||||
if (*lsr & SPRD_LSR_BI)
|
||||
*flag = TTY_BREAK;
|
||||
else if (*lsr & SPRD_LSR_PE)
|
||||
*flag = TTY_PARITY;
|
||||
else if (*lsr & SPRD_LSR_FE)
|
||||
*flag = TTY_FRAME;
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static inline void sprd_rx(struct uart_port *port)
|
||||
{
|
||||
struct tty_port *tty = &port->state->port;
|
||||
unsigned int ch, flag, lsr, max_count = SPRD_TIMEOUT;
|
||||
|
||||
while ((serial_in(port, SPRD_STS1) & 0x00ff) && max_count--) {
|
||||
lsr = serial_in(port, SPRD_LSR);
|
||||
ch = serial_in(port, SPRD_RXD);
|
||||
flag = TTY_NORMAL;
|
||||
port->icount.rx++;
|
||||
|
||||
if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE |
|
||||
SPRD_LSR_FE | SPRD_LSR_OE))
|
||||
if (handle_lsr_errors(port, &lsr, &flag))
|
||||
continue;
|
||||
if (uart_handle_sysrq_char(port, ch))
|
||||
continue;
|
||||
|
||||
uart_insert_char(port, lsr, SPRD_LSR_OE, ch, flag);
|
||||
}
|
||||
|
||||
tty_flip_buffer_push(tty);
|
||||
}
|
||||
|
||||
static inline void sprd_tx(struct uart_port *port)
|
||||
{
|
||||
struct circ_buf *xmit = &port->state->xmit;
|
||||
int count;
|
||||
|
||||
if (port->x_char) {
|
||||
serial_out(port, SPRD_TXD, port->x_char);
|
||||
port->icount.tx++;
|
||||
port->x_char = 0;
|
||||
return;
|
||||
}
|
||||
|
||||
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
|
||||
sprd_stop_tx(port);
|
||||
return;
|
||||
}
|
||||
|
||||
count = THLD_TX_EMPTY;
|
||||
do {
|
||||
serial_out(port, SPRD_TXD, xmit->buf[xmit->tail]);
|
||||
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
||||
port->icount.tx++;
|
||||
if (uart_circ_empty(xmit))
|
||||
break;
|
||||
} while (--count > 0);
|
||||
|
||||
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
||||
uart_write_wakeup(port);
|
||||
|
||||
if (uart_circ_empty(xmit))
|
||||
sprd_stop_tx(port);
|
||||
}
|
||||
|
||||
/* this handles the interrupt from one port */
|
||||
static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
|
||||
{
|
||||
struct uart_port *port = dev_id;
|
||||
unsigned int ims;
|
||||
|
||||
spin_lock(&port->lock);
|
||||
|
||||
ims = serial_in(port, SPRD_IMSR);
|
||||
|
||||
if (!ims)
|
||||
return IRQ_NONE;
|
||||
|
||||
serial_out(port, SPRD_ICLR, ~0);
|
||||
|
||||
if (ims & (SPRD_IMSR_RX_FIFO_FULL |
|
||||
SPRD_IMSR_BREAK_DETECT | SPRD_IMSR_TIMEOUT))
|
||||
sprd_rx(port);
|
||||
|
||||
if (ims & SPRD_IMSR_TX_FIFO_EMPTY)
|
||||
sprd_tx(port);
|
||||
|
||||
spin_unlock(&port->lock);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int sprd_startup(struct uart_port *port)
|
||||
{
|
||||
int ret = 0;
|
||||
unsigned int ien, fc;
|
||||
unsigned int timeout;
|
||||
struct sprd_uart_port *sp;
|
||||
unsigned long flags;
|
||||
|
||||
serial_out(port, SPRD_CTL2, ((THLD_TX_EMPTY << 8) | THLD_RX_FULL));
|
||||
|
||||
/* clear rx fifo */
|
||||
timeout = SPRD_TIMEOUT;
|
||||
while (timeout-- && serial_in(port, SPRD_STS1) & 0x00ff)
|
||||
serial_in(port, SPRD_RXD);
|
||||
|
||||
/* clear tx fifo */
|
||||
timeout = SPRD_TIMEOUT;
|
||||
while (timeout-- && serial_in(port, SPRD_STS1) & 0xff00)
|
||||
cpu_relax();
|
||||
|
||||
/* clear interrupt */
|
||||
serial_out(port, SPRD_IEN, 0);
|
||||
serial_out(port, SPRD_ICLR, ~0);
|
||||
|
||||
/* allocate irq */
|
||||
sp = container_of(port, struct sprd_uart_port, port);
|
||||
snprintf(sp->name, sizeof(sp->name), "sprd_serial%d", port->line);
|
||||
ret = devm_request_irq(port->dev, port->irq, sprd_handle_irq,
|
||||
IRQF_SHARED, sp->name, port);
|
||||
if (ret) {
|
||||
dev_err(port->dev, "fail to request serial irq %d, ret=%d\n",
|
||||
port->irq, ret);
|
||||
return ret;
|
||||
}
|
||||
fc = serial_in(port, SPRD_CTL1);
|
||||
fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF;
|
||||
serial_out(port, SPRD_CTL1, fc);
|
||||
|
||||
/* enable interrupt */
|
||||
spin_lock_irqsave(&port->lock, flags);
|
||||
ien = serial_in(port, SPRD_IEN);
|
||||
ien |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT | SPRD_IEN_TIMEOUT;
|
||||
serial_out(port, SPRD_IEN, ien);
|
||||
spin_unlock_irqrestore(&port->lock, flags);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void sprd_shutdown(struct uart_port *port)
|
||||
{
|
||||
serial_out(port, SPRD_IEN, 0);
|
||||
serial_out(port, SPRD_ICLR, ~0);
|
||||
devm_free_irq(port->dev, port->irq, port);
|
||||
}
|
||||
|
||||
static void sprd_set_termios(struct uart_port *port,
|
||||
struct ktermios *termios,
|
||||
struct ktermios *old)
|
||||
{
|
||||
unsigned int baud, quot;
|
||||
unsigned int lcr = 0, fc;
|
||||
unsigned long flags;
|
||||
|
||||
/* ask the core to calculate the divisor for us */
|
||||
baud = uart_get_baud_rate(port, termios, old, 0, SPRD_BAUD_IO_LIMIT);
|
||||
|
||||
quot = (unsigned int)((port->uartclk + baud / 2) / baud);
|
||||
|
||||
/* set data length */
|
||||
switch (termios->c_cflag & CSIZE) {
|
||||
case CS5:
|
||||
lcr |= SPRD_LCR_DATA_LEN5;
|
||||
break;
|
||||
case CS6:
|
||||
lcr |= SPRD_LCR_DATA_LEN6;
|
||||
break;
|
||||
case CS7:
|
||||
lcr |= SPRD_LCR_DATA_LEN7;
|
||||
break;
|
||||
case CS8:
|
||||
default:
|
||||
lcr |= SPRD_LCR_DATA_LEN8;
|
||||
break;
|
||||
}
|
||||
|
||||
/* calculate stop bits */
|
||||
lcr &= ~(SPRD_LCR_STOP_1BIT | SPRD_LCR_STOP_2BIT);
|
||||
if (termios->c_cflag & CSTOPB)
|
||||
lcr |= SPRD_LCR_STOP_2BIT;
|
||||
else
|
||||
lcr |= SPRD_LCR_STOP_1BIT;
|
||||
|
||||
/* calculate parity */
|
||||
lcr &= ~SPRD_LCR_PARITY;
|
||||
termios->c_cflag &= ~CMSPAR; /* no support mark/space */
|
||||
if (termios->c_cflag & PARENB) {
|
||||
lcr |= SPRD_LCR_PARITY_EN;
|
||||
if (termios->c_cflag & PARODD)
|
||||
lcr |= SPRD_LCR_ODD_PAR;
|
||||
else
|
||||
lcr |= SPRD_LCR_EVEN_PAR;
|
||||
}
|
||||
|
||||
spin_lock_irqsave(&port->lock, flags);
|
||||
|
||||
/* update the per-port timeout */
|
||||
uart_update_timeout(port, termios->c_cflag, baud);
|
||||
|
||||
port->read_status_mask = SPRD_LSR_OE;
|
||||
if (termios->c_iflag & INPCK)
|
||||
port->read_status_mask |= SPRD_LSR_FE | SPRD_LSR_PE;
|
||||
if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
|
||||
port->read_status_mask |= SPRD_LSR_BI;
|
||||
|
||||
/* characters to ignore */
|
||||
port->ignore_status_mask = 0;
|
||||
if (termios->c_iflag & IGNPAR)
|
||||
port->ignore_status_mask |= SPRD_LSR_PE | SPRD_LSR_FE;
|
||||
if (termios->c_iflag & IGNBRK) {
|
||||
port->ignore_status_mask |= SPRD_LSR_BI;
|
||||
/*
|
||||
* If we're ignoring parity and break indicators,
|
||||
* ignore overruns too (for real raw support).
|
||||
*/
|
||||
if (termios->c_iflag & IGNPAR)
|
||||
port->ignore_status_mask |= SPRD_LSR_OE;
|
||||
}
|
||||
|
||||
/* flow control */
|
||||
fc = serial_in(port, SPRD_CTL1);
|
||||
fc &= ~(RX_HW_FLOW_CTL_THLD | RX_HW_FLOW_CTL_EN | TX_HW_FLOW_CTL_EN);
|
||||
if (termios->c_cflag & CRTSCTS) {
|
||||
fc |= RX_HW_FLOW_CTL_THLD;
|
||||
fc |= RX_HW_FLOW_CTL_EN;
|
||||
fc |= TX_HW_FLOW_CTL_EN;
|
||||
}
|
||||
|
||||
/* clock divider bit0~bit15 */
|
||||
serial_out(port, SPRD_CLKD0, quot & 0xffff);
|
||||
|
||||
/* clock divider bit16~bit20 */
|
||||
serial_out(port, SPRD_CLKD1, (quot & 0x1f0000) >> 16);
|
||||
serial_out(port, SPRD_LCR, lcr);
|
||||
fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF;
|
||||
serial_out(port, SPRD_CTL1, fc);
|
||||
|
||||
spin_unlock_irqrestore(&port->lock, flags);
|
||||
|
||||
/* Don't rewrite B0 */
|
||||
if (tty_termios_baud_rate(termios))
|
||||
tty_termios_encode_baud_rate(termios, baud, baud);
|
||||
}
|
||||
|
||||
static const char *sprd_type(struct uart_port *port)
|
||||
{
|
||||
return "SPX";
|
||||
}
|
||||
|
||||
static void sprd_release_port(struct uart_port *port)
|
||||
{
|
||||
/* nothing to do */
|
||||
}
|
||||
|
||||
static int sprd_request_port(struct uart_port *port)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void sprd_config_port(struct uart_port *port, int flags)
|
||||
{
|
||||
if (flags & UART_CONFIG_TYPE)
|
||||
port->type = PORT_SPRD;
|
||||
}
|
||||
|
||||
static int sprd_verify_port(struct uart_port *port,
|
||||
struct serial_struct *ser)
|
||||
{
|
||||
if (ser->type != PORT_SPRD)
|
||||
return -EINVAL;
|
||||
if (port->irq != ser->irq)
|
||||
return -EINVAL;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct uart_ops serial_sprd_ops = {
|
||||
.tx_empty = sprd_tx_empty,
|
||||
.get_mctrl = sprd_get_mctrl,
|
||||
.set_mctrl = sprd_set_mctrl,
|
||||
.stop_tx = sprd_stop_tx,
|
||||
.start_tx = sprd_start_tx,
|
||||
.stop_rx = sprd_stop_rx,
|
||||
.break_ctl = sprd_break_ctl,
|
||||
.startup = sprd_startup,
|
||||
.shutdown = sprd_shutdown,
|
||||
.set_termios = sprd_set_termios,
|
||||
.type = sprd_type,
|
||||
.release_port = sprd_release_port,
|
||||
.request_port = sprd_request_port,
|
||||
.config_port = sprd_config_port,
|
||||
.verify_port = sprd_verify_port,
|
||||
};
|
||||
|
||||
#ifdef CONFIG_SERIAL_SPRD_CONSOLE
|
||||
static inline void wait_for_xmitr(struct uart_port *port)
|
||||
{
|
||||
unsigned int status, tmout = 10000;
|
||||
|
||||
/* wait up to 10ms for the character(s) to be sent */
|
||||
do {
|
||||
status = serial_in(port, SPRD_STS1);
|
||||
if (--tmout == 0)
|
||||
break;
|
||||
udelay(1);
|
||||
} while (status & 0xff00);
|
||||
}
|
||||
|
||||
static void sprd_console_putchar(struct uart_port *port, int ch)
|
||||
{
|
||||
wait_for_xmitr(port);
|
||||
serial_out(port, SPRD_TXD, ch);
|
||||
}
|
||||
|
||||
static void sprd_console_write(struct console *co, const char *s,
|
||||
unsigned int count)
|
||||
{
|
||||
struct uart_port *port = &sprd_port[co->index]->port;
|
||||
int locked = 1;
|
||||
unsigned long flags;
|
||||
|
||||
if (port->sysrq)
|
||||
locked = 0;
|
||||
else if (oops_in_progress)
|
||||
locked = spin_trylock_irqsave(&port->lock, flags);
|
||||
else
|
||||
spin_lock_irqsave(&port->lock, flags);
|
||||
|
||||
uart_console_write(port, s, count, sprd_console_putchar);
|
||||
|
||||
/* wait for transmitter to become empty */
|
||||
wait_for_xmitr(port);
|
||||
|
||||
if (locked)
|
||||
spin_unlock_irqrestore(&port->lock, flags);
|
||||
}
|
||||
|
||||
static int __init sprd_console_setup(struct console *co, char *options)
|
||||
{
|
||||
struct uart_port *port;
|
||||
int baud = 115200;
|
||||
int bits = 8;
|
||||
int parity = 'n';
|
||||
int flow = 'n';
|
||||
|
||||
if (co->index >= UART_NR_MAX || co->index < 0)
|
||||
co->index = 0;
|
||||
|
||||
port = &sprd_port[co->index]->port;
|
||||
if (port == NULL) {
|
||||
pr_info("serial port %d not yet initialized\n", co->index);
|
||||
return -ENODEV;
|
||||
}
|
||||
if (options)
|
||||
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
||||
|
||||
return uart_set_options(port, co, baud, parity, bits, flow);
|
||||
}
|
||||
|
||||
static struct uart_driver sprd_uart_driver;
|
||||
static struct console sprd_console = {
|
||||
.name = SPRD_TTY_NAME,
|
||||
.write = sprd_console_write,
|
||||
.device = uart_console_device,
|
||||
.setup = sprd_console_setup,
|
||||
.flags = CON_PRINTBUFFER,
|
||||
.index = -1,
|
||||
.data = &sprd_uart_driver,
|
||||
};
|
||||
|
||||
#define SPRD_CONSOLE (&sprd_console)
|
||||
|
||||
/* Support for earlycon */
|
||||
static void sprd_putc(struct uart_port *port, int c)
|
||||
{
|
||||
unsigned int timeout = SPRD_TIMEOUT;
|
||||
|
||||
while (timeout-- &&
|
||||
!(readl(port->membase + SPRD_LSR) & SPRD_LSR_TX_OVER))
|
||||
cpu_relax();
|
||||
|
||||
writeb(c, port->membase + SPRD_TXD);
|
||||
}
|
||||
|
||||
static void sprd_early_write(struct console *con, const char *s,
|
||||
unsigned n)
|
||||
{
|
||||
struct earlycon_device *dev = con->data;
|
||||
|
||||
uart_console_write(&dev->port, s, n, sprd_putc);
|
||||
}
|
||||
|
||||
static int __init sprd_early_console_setup(
|
||||
struct earlycon_device *device,
|
||||
const char *opt)
|
||||
{
|
||||
if (!device->port.membase)
|
||||
return -ENODEV;
|
||||
|
||||
device->con->write = sprd_early_write;
|
||||
return 0;
|
||||
}
|
||||
|
||||
EARLYCON_DECLARE(sprd_serial, sprd_early_console_setup);
|
||||
OF_EARLYCON_DECLARE(sprd_serial, "sprd,sc9836-uart",
|
||||
sprd_early_console_setup);
|
||||
|
||||
#else /* !CONFIG_SERIAL_SPRD_CONSOLE */
|
||||
#define SPRD_CONSOLE NULL
|
||||
#endif
|
||||
|
||||
static struct uart_driver sprd_uart_driver = {
|
||||
.owner = THIS_MODULE,
|
||||
.driver_name = "sprd_serial",
|
||||
.dev_name = SPRD_TTY_NAME,
|
||||
.major = 0,
|
||||
.minor = 0,
|
||||
.nr = UART_NR_MAX,
|
||||
.cons = SPRD_CONSOLE,
|
||||
};
|
||||
|
||||
static int sprd_probe_dt_alias(int index, struct device *dev)
|
||||
{
|
||||
struct device_node *np;
|
||||
int ret = index;
|
||||
|
||||
if (!IS_ENABLED(CONFIG_OF))
|
||||
return ret;
|
||||
|
||||
np = dev->of_node;
|
||||
if (!np)
|
||||
return ret;
|
||||
|
||||
ret = of_alias_get_id(np, "serial");
|
||||
if (IS_ERR_VALUE(ret))
|
||||
ret = index;
|
||||
else if (ret >= ARRAY_SIZE(sprd_port) || sprd_port[ret] != NULL) {
|
||||
dev_warn(dev, "requested serial port %d not available.\n", ret);
|
||||
ret = index;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int sprd_remove(struct platform_device *dev)
|
||||
{
|
||||
struct sprd_uart_port *sup = platform_get_drvdata(dev);
|
||||
|
||||
if (sup) {
|
||||
uart_remove_one_port(&sprd_uart_driver, &sup->port);
|
||||
sprd_port[sup->port.line] = NULL;
|
||||
sprd_ports_num--;
|
||||
}
|
||||
|
||||
if (!sprd_ports_num)
|
||||
uart_unregister_driver(&sprd_uart_driver);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sprd_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct resource *res;
|
||||
struct uart_port *up;
|
||||
struct clk *clk;
|
||||
int irq;
|
||||
int index;
|
||||
int ret;
|
||||
|
||||
for (index = 0; index < ARRAY_SIZE(sprd_port); index++)
|
||||
if (sprd_port[index] == NULL)
|
||||
break;
|
||||
|
||||
if (index == ARRAY_SIZE(sprd_port))
|
||||
return -EBUSY;
|
||||
|
||||
index = sprd_probe_dt_alias(index, &pdev->dev);
|
||||
|
||||
sprd_port[index] = devm_kzalloc(&pdev->dev,
|
||||
sizeof(*sprd_port[index]), GFP_KERNEL);
|
||||
if (!sprd_port[index])
|
||||
return -ENOMEM;
|
||||
|
||||
up = &sprd_port[index]->port;
|
||||
up->dev = &pdev->dev;
|
||||
up->line = index;
|
||||
up->type = PORT_SPRD;
|
||||
up->iotype = SERIAL_IO_PORT;
|
||||
up->uartclk = SPRD_DEF_RATE;
|
||||
up->fifosize = SPRD_FIFO_SIZE;
|
||||
up->ops = &serial_sprd_ops;
|
||||
up->flags = UPF_BOOT_AUTOCONF;
|
||||
|
||||
clk = devm_clk_get(&pdev->dev, NULL);
|
||||
if (!IS_ERR(clk))
|
||||
up->uartclk = clk_get_rate(clk);
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!res) {
|
||||
dev_err(&pdev->dev, "not provide mem resource\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
up->mapbase = res->start;
|
||||
up->membase = devm_ioremap_resource(&pdev->dev, res);
|
||||
if (IS_ERR(up->membase))
|
||||
return PTR_ERR(up->membase);
|
||||
|
||||
irq = platform_get_irq(pdev, 0);
|
||||
if (irq < 0) {
|
||||
dev_err(&pdev->dev, "not provide irq resource\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
up->irq = irq;
|
||||
|
||||
if (!sprd_ports_num) {
|
||||
ret = uart_register_driver(&sprd_uart_driver);
|
||||
if (ret < 0) {
|
||||
pr_err("Failed to register SPRD-UART driver\n");
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
sprd_ports_num++;
|
||||
|
||||
ret = uart_add_one_port(&sprd_uart_driver, up);
|
||||
if (ret) {
|
||||
sprd_port[index] = NULL;
|
||||
sprd_remove(pdev);
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, up);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int sprd_suspend(struct device *dev)
|
||||
{
|
||||
struct sprd_uart_port *sup = dev_get_drvdata(dev);
|
||||
|
||||
uart_suspend_port(&sprd_uart_driver, &sup->port);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sprd_resume(struct device *dev)
|
||||
{
|
||||
struct sprd_uart_port *sup = dev_get_drvdata(dev);
|
||||
|
||||
uart_resume_port(&sprd_uart_driver, &sup->port);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(sprd_pm_ops, sprd_suspend, sprd_resume);
|
||||
|
||||
static const struct of_device_id serial_ids[] = {
|
||||
{.compatible = "sprd,sc9836-uart",},
|
||||
{}
|
||||
};
|
||||
|
||||
static struct platform_driver sprd_platform_driver = {
|
||||
.probe = sprd_probe,
|
||||
.remove = sprd_remove,
|
||||
.driver = {
|
||||
.name = "sprd_serial",
|
||||
.of_match_table = of_match_ptr(serial_ids),
|
||||
.pm = &sprd_pm_ops,
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(sprd_platform_driver);
|
||||
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_DESCRIPTION("Spreadtrum SoC serial driver series");
|
||||
@ -252,4 +252,7 @@
|
||||
/* Conexant Digicolor */
|
||||
#define PORT_DIGICOLOR 110
|
||||
|
||||
/* SPRD SERIAL */
|
||||
#define PORT_SPRD 111
|
||||
|
||||
#endif /* _UAPILINUX_SERIAL_CORE_H */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user