mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-01 09:36:49 +07:00
mmc: tmio: split core functionality, DMA and MFD glue
TMIO MMC chips contain an SD / SDIO IP core from Panasonic, similar to the one, used in MN5774 and other MN57xx controllers. These IP cores are included in many multifunction devices, in sh-mobile chips from Renesas, in the latter case they can also use DMA. Some sh-mobile implementations also have some other specialities, that MFD-based solutions don't have. This makes supporting all these features in a monolithic driver inconveniet and error-prone. This patch splits the driver into 3 parts: the core, the MFD glue and the DMA support. In case of a modular build, two modules will be built: mmc_tmio_core and mmc_tmio. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
This commit is contained in:
Guennadi Liakhovetski
Chris Ball
parent
5f52c35529
commit
b6147490e6
@ -439,9 +439,13 @@ config MMC_SDRICOH_CS
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called sdricoh_cs.
|
||||
|
||||
config MMC_TMIO_CORE
|
||||
tristate
|
||||
|
||||
config MMC_TMIO
|
||||
tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
|
||||
depends on MFD_TMIO || MFD_ASIC3 || MFD_SH_MOBILE_SDHI
|
||||
select MMC_TMIO_CORE
|
||||
help
|
||||
This provides support for the SD/MMC cell found in TC6393XB,
|
||||
T7L66XB and also HTC ASIC3
|
||||
|
||||
@ -29,6 +29,9 @@ endif
|
||||
obj-$(CONFIG_MMC_S3C) += s3cmci.o
|
||||
obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
|
||||
obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
|
||||
obj-$(CONFIG_MMC_TMIO_CORE) += tmio_mmc_core.o
|
||||
tmio_mmc_core-y := tmio_mmc_pio.o
|
||||
tmio_mmc_core-$(CONFIG_TMIO_MMC_DMA) += tmio_mmc_dma.o
|
||||
obj-$(CONFIG_MMC_CB710) += cb710-mmc.o
|
||||
obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o
|
||||
obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
145
drivers/mmc/host/tmio_mmc.h
Normal file
145
drivers/mmc/host/tmio_mmc.h
Normal file
@ -0,0 +1,145 @@
|
||||
/*
|
||||
* linux/drivers/mmc/host/tmio_mmc.h
|
||||
*
|
||||
* Copyright (C) 2007 Ian Molton
|
||||
* Copyright (C) 2004 Ian Molton
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* Driver for the MMC / SD / SDIO cell found in:
|
||||
*
|
||||
* TC6393XB TC6391XB TC6387XB T7L66XB ASIC3
|
||||
*/
|
||||
|
||||
#ifndef TMIO_MMC_H
|
||||
#define TMIO_MMC_H
|
||||
|
||||
#include <linux/highmem.h>
|
||||
#include <linux/pagemap.h>
|
||||
|
||||
/* Definitions for values the CTRL_STATUS register can take. */
|
||||
#define TMIO_STAT_CMDRESPEND 0x00000001
|
||||
#define TMIO_STAT_DATAEND 0x00000004
|
||||
#define TMIO_STAT_CARD_REMOVE 0x00000008
|
||||
#define TMIO_STAT_CARD_INSERT 0x00000010
|
||||
#define TMIO_STAT_SIGSTATE 0x00000020
|
||||
#define TMIO_STAT_WRPROTECT 0x00000080
|
||||
#define TMIO_STAT_CARD_REMOVE_A 0x00000100
|
||||
#define TMIO_STAT_CARD_INSERT_A 0x00000200
|
||||
#define TMIO_STAT_SIGSTATE_A 0x00000400
|
||||
#define TMIO_STAT_CMD_IDX_ERR 0x00010000
|
||||
#define TMIO_STAT_CRCFAIL 0x00020000
|
||||
#define TMIO_STAT_STOPBIT_ERR 0x00040000
|
||||
#define TMIO_STAT_DATATIMEOUT 0x00080000
|
||||
#define TMIO_STAT_RXOVERFLOW 0x00100000
|
||||
#define TMIO_STAT_TXUNDERRUN 0x00200000
|
||||
#define TMIO_STAT_CMDTIMEOUT 0x00400000
|
||||
#define TMIO_STAT_RXRDY 0x01000000
|
||||
#define TMIO_STAT_TXRQ 0x02000000
|
||||
#define TMIO_STAT_ILL_FUNC 0x20000000
|
||||
#define TMIO_STAT_CMD_BUSY 0x40000000
|
||||
#define TMIO_STAT_ILL_ACCESS 0x80000000
|
||||
|
||||
/* Definitions for values the CTRL_SDIO_STATUS register can take. */
|
||||
#define TMIO_SDIO_STAT_IOIRQ 0x0001
|
||||
#define TMIO_SDIO_STAT_EXPUB52 0x4000
|
||||
#define TMIO_SDIO_STAT_EXWT 0x8000
|
||||
#define TMIO_SDIO_MASK_ALL 0xc007
|
||||
|
||||
/* Define some IRQ masks */
|
||||
/* This is the mask used at reset by the chip */
|
||||
#define TMIO_MASK_ALL 0x837f031d
|
||||
#define TMIO_MASK_READOP (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND)
|
||||
#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND)
|
||||
#define TMIO_MASK_CMD (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \
|
||||
TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
|
||||
#define TMIO_MASK_IRQ (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD)
|
||||
|
||||
struct tmio_mmc_data;
|
||||
|
||||
struct tmio_mmc_host {
|
||||
void __iomem *ctl;
|
||||
unsigned long bus_shift;
|
||||
struct mmc_command *cmd;
|
||||
struct mmc_request *mrq;
|
||||
struct mmc_data *data;
|
||||
struct mmc_host *mmc;
|
||||
int irq;
|
||||
unsigned int sdio_irq_enabled;
|
||||
|
||||
/* Callbacks for clock / power control */
|
||||
void (*set_pwr)(struct platform_device *host, int state);
|
||||
void (*set_clk_div)(struct platform_device *host, int state);
|
||||
|
||||
/* pio related stuff */
|
||||
struct scatterlist *sg_ptr;
|
||||
struct scatterlist *sg_orig;
|
||||
unsigned int sg_len;
|
||||
unsigned int sg_off;
|
||||
|
||||
struct platform_device *pdev;
|
||||
struct tmio_mmc_data *pdata;
|
||||
|
||||
/* DMA support */
|
||||
bool force_pio;
|
||||
struct dma_chan *chan_rx;
|
||||
struct dma_chan *chan_tx;
|
||||
struct tasklet_struct dma_complete;
|
||||
struct tasklet_struct dma_issue;
|
||||
struct scatterlist bounce_sg;
|
||||
u8 *bounce_buf;
|
||||
|
||||
/* Track lost interrupts */
|
||||
struct delayed_work delayed_reset_work;
|
||||
spinlock_t lock;
|
||||
unsigned long last_req_ts;
|
||||
};
|
||||
|
||||
int tmio_mmc_host_probe(struct tmio_mmc_host **host,
|
||||
struct platform_device *pdev,
|
||||
struct tmio_mmc_data *pdata);
|
||||
void tmio_mmc_host_remove(struct tmio_mmc_host *host);
|
||||
void tmio_mmc_do_data_irq(struct tmio_mmc_host *host);
|
||||
|
||||
void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i);
|
||||
void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i);
|
||||
|
||||
static inline char *tmio_mmc_kmap_atomic(struct scatterlist *sg,
|
||||
unsigned long *flags)
|
||||
{
|
||||
local_irq_save(*flags);
|
||||
return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
|
||||
}
|
||||
|
||||
static inline void tmio_mmc_kunmap_atomic(struct scatterlist *sg,
|
||||
unsigned long *flags, void *virt)
|
||||
{
|
||||
kunmap_atomic(virt - sg->offset, KM_BIO_SRC_IRQ);
|
||||
local_irq_restore(*flags);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_TMIO_MMC_DMA
|
||||
void tmio_mmc_start_dma(struct tmio_mmc_host *host, struct mmc_data *data);
|
||||
void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata);
|
||||
void tmio_mmc_release_dma(struct tmio_mmc_host *host);
|
||||
#else
|
||||
static inline void tmio_mmc_start_dma(struct tmio_mmc_host *host,
|
||||
struct mmc_data *data)
|
||||
{
|
||||
}
|
||||
|
||||
static inline void tmio_mmc_request_dma(struct tmio_mmc_host *host,
|
||||
struct tmio_mmc_data *pdata)
|
||||
{
|
||||
host->chan_tx = NULL;
|
||||
host->chan_rx = NULL;
|
||||
}
|
||||
|
||||
static inline void tmio_mmc_release_dma(struct tmio_mmc_host *host)
|
||||
{
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
316
drivers/mmc/host/tmio_mmc_dma.c
Normal file
316
drivers/mmc/host/tmio_mmc_dma.c
Normal file
@ -0,0 +1,316 @@
|
||||
/*
|
||||
* linux/drivers/mmc/tmio_mmc_dma.c
|
||||
*
|
||||
* Copyright (C) 2010-2011 Guennadi Liakhovetski
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* DMA function for TMIO MMC implementations
|
||||
*/
|
||||
|
||||
#include <linux/device.h>
|
||||
#include <linux/dmaengine.h>
|
||||
#include <linux/mfd/tmio.h>
|
||||
#include <linux/mmc/host.h>
|
||||
#include <linux/pagemap.h>
|
||||
#include <linux/scatterlist.h>
|
||||
|
||||
#include "tmio_mmc.h"
|
||||
|
||||
#define TMIO_MMC_MIN_DMA_LEN 8
|
||||
|
||||
static void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable)
|
||||
{
|
||||
#if defined(CONFIG_SUPERH) || defined(CONFIG_ARCH_SHMOBILE)
|
||||
/* Switch DMA mode on or off - SuperH specific? */
|
||||
writew(enable ? 2 : 0, host->ctl + (0xd8 << host->bus_shift));
|
||||
#endif
|
||||
}
|
||||
|
||||
static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host)
|
||||
{
|
||||
struct scatterlist *sg = host->sg_ptr, *sg_tmp;
|
||||
struct dma_async_tx_descriptor *desc = NULL;
|
||||
struct dma_chan *chan = host->chan_rx;
|
||||
struct tmio_mmc_data *pdata = host->pdata;
|
||||
dma_cookie_t cookie;
|
||||
int ret, i;
|
||||
bool aligned = true, multiple = true;
|
||||
unsigned int align = (1 << pdata->dma->alignment_shift) - 1;
|
||||
|
||||
for_each_sg(sg, sg_tmp, host->sg_len, i) {
|
||||
if (sg_tmp->offset & align)
|
||||
aligned = false;
|
||||
if (sg_tmp->length & align) {
|
||||
multiple = false;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if ((!aligned && (host->sg_len > 1 || sg->length > PAGE_CACHE_SIZE ||
|
||||
(align & PAGE_MASK))) || !multiple) {
|
||||
ret = -EINVAL;
|
||||
goto pio;
|
||||
}
|
||||
|
||||
if (sg->length < TMIO_MMC_MIN_DMA_LEN) {
|
||||
host->force_pio = true;
|
||||
return;
|
||||
}
|
||||
|
||||
tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_RXRDY);
|
||||
|
||||
/* The only sg element can be unaligned, use our bounce buffer then */
|
||||
if (!aligned) {
|
||||
sg_init_one(&host->bounce_sg, host->bounce_buf, sg->length);
|
||||
host->sg_ptr = &host->bounce_sg;
|
||||
sg = host->sg_ptr;
|
||||
}
|
||||
|
||||
ret = dma_map_sg(chan->device->dev, sg, host->sg_len, DMA_FROM_DEVICE);
|
||||
if (ret > 0)
|
||||
desc = chan->device->device_prep_slave_sg(chan, sg, ret,
|
||||
DMA_FROM_DEVICE, DMA_CTRL_ACK);
|
||||
|
||||
if (desc) {
|
||||
cookie = dmaengine_submit(desc);
|
||||
if (cookie < 0) {
|
||||
desc = NULL;
|
||||
ret = cookie;
|
||||
}
|
||||
}
|
||||
dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n",
|
||||
__func__, host->sg_len, ret, cookie, host->mrq);
|
||||
|
||||
pio:
|
||||
if (!desc) {
|
||||
/* DMA failed, fall back to PIO */
|
||||
if (ret >= 0)
|
||||
ret = -EIO;
|
||||
host->chan_rx = NULL;
|
||||
dma_release_channel(chan);
|
||||
/* Free the Tx channel too */
|
||||
chan = host->chan_tx;
|
||||
if (chan) {
|
||||
host->chan_tx = NULL;
|
||||
dma_release_channel(chan);
|
||||
}
|
||||
dev_warn(&host->pdev->dev,
|
||||
"DMA failed: %d, falling back to PIO\n", ret);
|
||||
tmio_mmc_enable_dma(host, false);
|
||||
}
|
||||
|
||||
dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d, sg[%d]\n", __func__,
|
||||
desc, cookie, host->sg_len);
|
||||
}
|
||||
|
||||
static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host)
|
||||
{
|
||||
struct scatterlist *sg = host->sg_ptr, *sg_tmp;
|
||||
struct dma_async_tx_descriptor *desc = NULL;
|
||||
struct dma_chan *chan = host->chan_tx;
|
||||
struct tmio_mmc_data *pdata = host->pdata;
|
||||
dma_cookie_t cookie;
|
||||
int ret, i;
|
||||
bool aligned = true, multiple = true;
|
||||
unsigned int align = (1 << pdata->dma->alignment_shift) - 1;
|
||||
|
||||
for_each_sg(sg, sg_tmp, host->sg_len, i) {
|
||||
if (sg_tmp->offset & align)
|
||||
aligned = false;
|
||||
if (sg_tmp->length & align) {
|
||||
multiple = false;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if ((!aligned && (host->sg_len > 1 || sg->length > PAGE_CACHE_SIZE ||
|
||||
(align & PAGE_MASK))) || !multiple) {
|
||||
ret = -EINVAL;
|
||||
goto pio;
|
||||
}
|
||||
|
||||
if (sg->length < TMIO_MMC_MIN_DMA_LEN) {
|
||||
host->force_pio = true;
|
||||
return;
|
||||
}
|
||||
|
||||
tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_TXRQ);
|
||||
|
||||
/* The only sg element can be unaligned, use our bounce buffer then */
|
||||
if (!aligned) {
|
||||
unsigned long flags;
|
||||
void *sg_vaddr = tmio_mmc_kmap_atomic(sg, &flags);
|
||||
sg_init_one(&host->bounce_sg, host->bounce_buf, sg->length);
|
||||
memcpy(host->bounce_buf, sg_vaddr, host->bounce_sg.length);
|
||||
tmio_mmc_kunmap_atomic(sg, &flags, sg_vaddr);
|
||||
host->sg_ptr = &host->bounce_sg;
|
||||
sg = host->sg_ptr;
|
||||
}
|
||||
|
||||
ret = dma_map_sg(chan->device->dev, sg, host->sg_len, DMA_TO_DEVICE);
|
||||
if (ret > 0)
|
||||
desc = chan->device->device_prep_slave_sg(chan, sg, ret,
|
||||
DMA_TO_DEVICE, DMA_CTRL_ACK);
|
||||
|
||||
if (desc) {
|
||||
cookie = dmaengine_submit(desc);
|
||||
if (cookie < 0) {
|
||||
desc = NULL;
|
||||
ret = cookie;
|
||||
}
|
||||
}
|
||||
dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n",
|
||||
__func__, host->sg_len, ret, cookie, host->mrq);
|
||||
|
||||
pio:
|
||||
if (!desc) {
|
||||
/* DMA failed, fall back to PIO */
|
||||
if (ret >= 0)
|
||||
ret = -EIO;
|
||||
host->chan_tx = NULL;
|
||||
dma_release_channel(chan);
|
||||
/* Free the Rx channel too */
|
||||
chan = host->chan_rx;
|
||||
if (chan) {
|
||||
host->chan_rx = NULL;
|
||||
dma_release_channel(chan);
|
||||
}
|
||||
dev_warn(&host->pdev->dev,
|
||||
"DMA failed: %d, falling back to PIO\n", ret);
|
||||
tmio_mmc_enable_dma(host, false);
|
||||
}
|
||||
|
||||
dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d\n", __func__,
|
||||
desc, cookie);
|
||||
}
|
||||
|
||||
void tmio_mmc_start_dma(struct tmio_mmc_host *host,
|
||||
struct mmc_data *data)
|
||||
{
|
||||
if (data->flags & MMC_DATA_READ) {
|
||||
if (host->chan_rx)
|
||||
tmio_mmc_start_dma_rx(host);
|
||||
} else {
|
||||
if (host->chan_tx)
|
||||
tmio_mmc_start_dma_tx(host);
|
||||
}
|
||||
}
|
||||
|
||||
static void tmio_mmc_issue_tasklet_fn(unsigned long priv)
|
||||
{
|
||||
struct tmio_mmc_host *host = (struct tmio_mmc_host *)priv;
|
||||
struct dma_chan *chan = NULL;
|
||||
|
||||
spin_lock_irq(&host->lock);
|
||||
|
||||
if (host && host->data) {
|
||||
if (host->data->flags & MMC_DATA_READ)
|
||||
chan = host->chan_rx;
|
||||
else
|
||||
chan = host->chan_tx;
|
||||
}
|
||||
|
||||
spin_unlock_irq(&host->lock);
|
||||
|
||||
tmio_mmc_enable_mmc_irqs(host, TMIO_STAT_DATAEND);
|
||||
|
||||
if (chan)
|
||||
dma_async_issue_pending(chan);
|
||||
}
|
||||
|
||||
static void tmio_mmc_tasklet_fn(unsigned long arg)
|
||||
{
|
||||
struct tmio_mmc_host *host = (struct tmio_mmc_host *)arg;
|
||||
|
||||
spin_lock_irq(&host->lock);
|
||||
|
||||
if (!host->data)
|
||||
goto out;
|
||||
|
||||
if (host->data->flags & MMC_DATA_READ)
|
||||
dma_unmap_sg(host->chan_rx->device->dev,
|
||||
host->sg_ptr, host->sg_len,
|
||||
DMA_FROM_DEVICE);
|
||||
else
|
||||
dma_unmap_sg(host->chan_tx->device->dev,
|
||||
host->sg_ptr, host->sg_len,
|
||||
DMA_TO_DEVICE);
|
||||
|
||||
tmio_mmc_do_data_irq(host);
|
||||
out:
|
||||
spin_unlock_irq(&host->lock);
|
||||
}
|
||||
|
||||
/* It might be necessary to make filter MFD specific */
|
||||
static bool tmio_mmc_filter(struct dma_chan *chan, void *arg)
|
||||
{
|
||||
dev_dbg(chan->device->dev, "%s: slave data %p\n", __func__, arg);
|
||||
chan->private = arg;
|
||||
return true;
|
||||
}
|
||||
|
||||
void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata)
|
||||
{
|
||||
/* We can only either use DMA for both Tx and Rx or not use it at all */
|
||||
if (pdata->dma) {
|
||||
dma_cap_mask_t mask;
|
||||
|
||||
dma_cap_zero(mask);
|
||||
dma_cap_set(DMA_SLAVE, mask);
|
||||
|
||||
host->chan_tx = dma_request_channel(mask, tmio_mmc_filter,
|
||||
pdata->dma->chan_priv_tx);
|
||||
dev_dbg(&host->pdev->dev, "%s: TX: got channel %p\n", __func__,
|
||||
host->chan_tx);
|
||||
|
||||
if (!host->chan_tx)
|
||||
return;
|
||||
|
||||
host->chan_rx = dma_request_channel(mask, tmio_mmc_filter,
|
||||
pdata->dma->chan_priv_rx);
|
||||
dev_dbg(&host->pdev->dev, "%s: RX: got channel %p\n", __func__,
|
||||
host->chan_rx);
|
||||
|
||||
if (!host->chan_rx)
|
||||
goto ereqrx;
|
||||
|
||||
host->bounce_buf = (u8 *)__get_free_page(GFP_KERNEL | GFP_DMA);
|
||||
if (!host->bounce_buf)
|
||||
goto ebouncebuf;
|
||||
|
||||
tasklet_init(&host->dma_complete, tmio_mmc_tasklet_fn, (unsigned long)host);
|
||||
tasklet_init(&host->dma_issue, tmio_mmc_issue_tasklet_fn, (unsigned long)host);
|
||||
|
||||
tmio_mmc_enable_dma(host, true);
|
||||
|
||||
return;
|
||||
ebouncebuf:
|
||||
dma_release_channel(host->chan_rx);
|
||||
host->chan_rx = NULL;
|
||||
ereqrx:
|
||||
dma_release_channel(host->chan_tx);
|
||||
host->chan_tx = NULL;
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
void tmio_mmc_release_dma(struct tmio_mmc_host *host)
|
||||
{
|
||||
if (host->chan_tx) {
|
||||
struct dma_chan *chan = host->chan_tx;
|
||||
host->chan_tx = NULL;
|
||||
dma_release_channel(chan);
|
||||
}
|
||||
if (host->chan_rx) {
|
||||
struct dma_chan *chan = host->chan_rx;
|
||||
host->chan_rx = NULL;
|
||||
dma_release_channel(chan);
|
||||
}
|
||||
if (host->bounce_buf) {
|
||||
free_pages((unsigned long)host->bounce_buf, 0);
|
||||
host->bounce_buf = NULL;
|
||||
}
|
||||
}
|
||||
923
drivers/mmc/host/tmio_mmc_pio.c
Normal file
923
drivers/mmc/host/tmio_mmc_pio.c
Normal file
@ -0,0 +1,923 @@
|
||||
/*
|
||||
* linux/drivers/mmc/host/tmio_mmc_pio.c
|
||||
*
|
||||
* Copyright (C) 2011 Guennadi Liakhovetski
|
||||
* Copyright (C) 2007 Ian Molton
|
||||
* Copyright (C) 2004 Ian Molton
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* Driver for the MMC / SD / SDIO IP found in:
|
||||
*
|
||||
* TC6393XB, TC6391XB, TC6387XB, T7L66XB, ASIC3, SH-Mobile SoCs
|
||||
*
|
||||
* This driver draws mainly on scattered spec sheets, Reverse engineering
|
||||
* of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit
|
||||
* support). (Further 4 bit support from a later datasheet).
|
||||
*
|
||||
* TODO:
|
||||
* Investigate using a workqueue for PIO transfers
|
||||
* Eliminate FIXMEs
|
||||
* SDIO support
|
||||
* Better Power management
|
||||
* Handle MMC errors better
|
||||
* double buffer support
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/highmem.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/mfd/tmio.h>
|
||||
#include <linux/mmc/host.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/pagemap.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/scatterlist.h>
|
||||
#include <linux/workqueue.h>
|
||||
#include <linux/spinlock.h>
|
||||
|
||||
#include "tmio_mmc.h"
|
||||
|
||||
#define CTL_SD_CMD 0x00
|
||||
#define CTL_ARG_REG 0x04
|
||||
#define CTL_STOP_INTERNAL_ACTION 0x08
|
||||
#define CTL_XFER_BLK_COUNT 0xa
|
||||
#define CTL_RESPONSE 0x0c
|
||||
#define CTL_STATUS 0x1c
|
||||
#define CTL_IRQ_MASK 0x20
|
||||
#define CTL_SD_CARD_CLK_CTL 0x24
|
||||
#define CTL_SD_XFER_LEN 0x26
|
||||
#define CTL_SD_MEM_CARD_OPT 0x28
|
||||
#define CTL_SD_ERROR_DETAIL_STATUS 0x2c
|
||||
#define CTL_SD_DATA_PORT 0x30
|
||||
#define CTL_TRANSACTION_CTL 0x34
|
||||
#define CTL_SDIO_STATUS 0x36
|
||||
#define CTL_SDIO_IRQ_MASK 0x38
|
||||
#define CTL_RESET_SD 0xe0
|
||||
#define CTL_SDIO_REGS 0x100
|
||||
#define CTL_CLK_AND_WAIT_CTL 0x138
|
||||
#define CTL_RESET_SDIO 0x1e0
|
||||
|
||||
static u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr)
|
||||
{
|
||||
return readw(host->ctl + (addr << host->bus_shift));
|
||||
}
|
||||
|
||||
static void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr,
|
||||
u16 *buf, int count)
|
||||
{
|
||||
readsw(host->ctl + (addr << host->bus_shift), buf, count);
|
||||
}
|
||||
|
||||
static u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr)
|
||||
{
|
||||
return readw(host->ctl + (addr << host->bus_shift)) |
|
||||
readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16;
|
||||
}
|
||||
|
||||
static void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val)
|
||||
{
|
||||
writew(val, host->ctl + (addr << host->bus_shift));
|
||||
}
|
||||
|
||||
static void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr,
|
||||
u16 *buf, int count)
|
||||
{
|
||||
writesw(host->ctl + (addr << host->bus_shift), buf, count);
|
||||
}
|
||||
|
||||
static void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32 val)
|
||||
{
|
||||
writew(val, host->ctl + (addr << host->bus_shift));
|
||||
writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
|
||||
}
|
||||
|
||||
void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
|
||||
{
|
||||
u32 mask = sd_ctrl_read32(host, CTL_IRQ_MASK) & ~(i & TMIO_MASK_IRQ);
|
||||
sd_ctrl_write32(host, CTL_IRQ_MASK, mask);
|
||||
}
|
||||
|
||||
void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
|
||||
{
|
||||
u32 mask = sd_ctrl_read32(host, CTL_IRQ_MASK) | (i & TMIO_MASK_IRQ);
|
||||
sd_ctrl_write32(host, CTL_IRQ_MASK, mask);
|
||||
}
|
||||
|
||||
static void tmio_mmc_ack_mmc_irqs(struct tmio_mmc_host *host, u32 i)
|
||||
{
|
||||
sd_ctrl_write32(host, CTL_STATUS, ~i);
|
||||
}
|
||||
|
||||
static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data)
|
||||
{
|
||||
host->sg_len = data->sg_len;
|
||||
host->sg_ptr = data->sg;
|
||||
host->sg_orig = data->sg;
|
||||
host->sg_off = 0;
|
||||
}
|
||||
|
||||
static int tmio_mmc_next_sg(struct tmio_mmc_host *host)
|
||||
{
|
||||
host->sg_ptr = sg_next(host->sg_ptr);
|
||||
host->sg_off = 0;
|
||||
return --host->sg_len;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_MMC_DEBUG
|
||||
|
||||
#define STATUS_TO_TEXT(a, status, i) \
|
||||
do { \
|
||||
if (status & TMIO_STAT_##a) { \
|
||||
if (i++) \
|
||||
printk(" | "); \
|
||||
printk(#a); \
|
||||
} \
|
||||
} while (0)
|
||||
|
||||
static void pr_debug_status(u32 status)
|
||||
{
|
||||
int i = 0;
|
||||
printk(KERN_DEBUG "status: %08x = ", status);
|
||||
STATUS_TO_TEXT(CARD_REMOVE, status, i);
|
||||
STATUS_TO_TEXT(CARD_INSERT, status, i);
|
||||
STATUS_TO_TEXT(SIGSTATE, status, i);
|
||||
STATUS_TO_TEXT(WRPROTECT, status, i);
|
||||
STATUS_TO_TEXT(CARD_REMOVE_A, status, i);
|
||||
STATUS_TO_TEXT(CARD_INSERT_A, status, i);
|
||||
STATUS_TO_TEXT(SIGSTATE_A, status, i);
|
||||
STATUS_TO_TEXT(CMD_IDX_ERR, status, i);
|
||||
STATUS_TO_TEXT(STOPBIT_ERR, status, i);
|
||||
STATUS_TO_TEXT(ILL_FUNC, status, i);
|
||||
STATUS_TO_TEXT(CMD_BUSY, status, i);
|
||||
STATUS_TO_TEXT(CMDRESPEND, status, i);
|
||||
STATUS_TO_TEXT(DATAEND, status, i);
|
||||
STATUS_TO_TEXT(CRCFAIL, status, i);
|
||||
STATUS_TO_TEXT(DATATIMEOUT, status, i);
|
||||
STATUS_TO_TEXT(CMDTIMEOUT, status, i);
|
||||
STATUS_TO_TEXT(RXOVERFLOW, status, i);
|
||||
STATUS_TO_TEXT(TXUNDERRUN, status, i);
|
||||
STATUS_TO_TEXT(RXRDY, status, i);
|
||||
STATUS_TO_TEXT(TXRQ, status, i);
|
||||
STATUS_TO_TEXT(ILL_ACCESS, status, i);
|
||||
printk("\n");
|
||||
}
|
||||
|
||||
#else
|
||||
#define pr_debug_status(s) do { } while (0)
|
||||
#endif
|
||||
|
||||
static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
|
||||
{
|
||||
struct tmio_mmc_host *host = mmc_priv(mmc);
|
||||
|
||||
if (enable) {
|
||||
host->sdio_irq_enabled = 1;
|
||||
sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
|
||||
sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK,
|
||||
(TMIO_SDIO_MASK_ALL & ~TMIO_SDIO_STAT_IOIRQ));
|
||||
} else {
|
||||
sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, TMIO_SDIO_MASK_ALL);
|
||||
sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000);
|
||||
host->sdio_irq_enabled = 0;
|
||||
}
|
||||
}
|
||||
|
||||
static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
|
||||
{
|
||||
u32 clk = 0, clock;
|
||||
|
||||
if (new_clock) {
|
||||
for (clock = host->mmc->f_min, clk = 0x80000080;
|
||||
new_clock >= (clock<<1); clk >>= 1)
|
||||
clock <<= 1;
|
||||
clk |= 0x100;
|
||||
}
|
||||
|
||||
if (host->set_clk_div)
|
||||
host->set_clk_div(host->pdev, (clk>>22) & 1);
|
||||
|
||||
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
|
||||
}
|
||||
|
||||
static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
|
||||
{
|
||||
struct tmio_mmc_data *pdata = host->pdata;
|
||||
|
||||
/*
|
||||
* Testing on sh-mobile showed that SDIO IRQs are unmasked when
|
||||
* CTL_CLK_AND_WAIT_CTL gets written, so we have to disable the
|
||||
* device IRQ here and restore the SDIO IRQ mask before
|
||||
* re-enabling the device IRQ.
|
||||
*/
|
||||
if (pdata->flags & TMIO_MMC_SDIO_IRQ)
|
||||
disable_irq(host->irq);
|
||||
sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
|
||||
msleep(10);
|
||||
if (pdata->flags & TMIO_MMC_SDIO_IRQ) {
|
||||
tmio_mmc_enable_sdio_irq(host->mmc, host->sdio_irq_enabled);
|
||||
enable_irq(host->irq);
|
||||
}
|
||||
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 &
|
||||
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
|
||||
msleep(10);
|
||||
}
|
||||
|
||||
static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
|
||||
{
|
||||
struct tmio_mmc_data *pdata = host->pdata;
|
||||
|
||||
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 |
|
||||
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
|
||||
msleep(10);
|
||||
/* see comment in tmio_mmc_clk_stop above */
|
||||
if (pdata->flags & TMIO_MMC_SDIO_IRQ)
|
||||
disable_irq(host->irq);
|
||||
sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
|
||||
msleep(10);
|
||||
if (pdata->flags & TMIO_MMC_SDIO_IRQ) {
|
||||
tmio_mmc_enable_sdio_irq(host->mmc, host->sdio_irq_enabled);
|
||||
enable_irq(host->irq);
|
||||
}
|
||||
}
|
||||
|
||||
static void tmio_mmc_reset(struct tmio_mmc_host *host)
|
||||
{
|
||||
/* FIXME - should we set stop clock reg here */
|
||||
sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
|
||||
sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
|
||||
msleep(10);
|
||||
sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
|
||||
sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
|
||||
msleep(10);
|
||||
}
|
||||
|
||||
static void tmio_mmc_reset_work(struct work_struct *work)
|
||||
{
|
||||
struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
|
||||
delayed_reset_work.work);
|
||||
struct mmc_request *mrq;
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&host->lock, flags);
|
||||
mrq = host->mrq;
|
||||
|
||||
/* request already finished */
|
||||
if (!mrq
|
||||
|| time_is_after_jiffies(host->last_req_ts +
|
||||
msecs_to_jiffies(2000))) {
|
||||
spin_unlock_irqrestore(&host->lock, flags);
|
||||
return;
|
||||
}
|
||||
|
||||
dev_warn(&host->pdev->dev,
|
||||
"timeout waiting for hardware interrupt (CMD%u)\n",
|
||||
mrq->cmd->opcode);
|
||||
|
||||
if (host->data)
|
||||
host->data->error = -ETIMEDOUT;
|
||||
else if (host->cmd)
|
||||
host->cmd->error = -ETIMEDOUT;
|
||||
else
|
||||
mrq->cmd->error = -ETIMEDOUT;
|
||||
|
||||
host->cmd = NULL;
|
||||
host->data = NULL;
|
||||
host->mrq = NULL;
|
||||
host->force_pio = false;
|
||||
|
||||
spin_unlock_irqrestore(&host->lock, flags);
|
||||
|
||||
tmio_mmc_reset(host);
|
||||
|
||||
mmc_request_done(host->mmc, mrq);
|
||||
}
|
||||
|
||||
static void tmio_mmc_finish_request(struct tmio_mmc_host *host)
|
||||
{
|
||||
struct mmc_request *mrq = host->mrq;
|
||||
|
||||
if (!mrq)
|
||||
return;
|
||||
|
||||
host->mrq = NULL;
|
||||
host->cmd = NULL;
|
||||
host->data = NULL;
|
||||
host->force_pio = false;
|
||||
|
||||
cancel_delayed_work(&host->delayed_reset_work);
|
||||
|
||||
mmc_request_done(host->mmc, mrq);
|
||||
}
|
||||
|
||||
/* These are the bitmasks the tmio chip requires to implement the MMC response
|
||||
* types. Note that R1 and R6 are the same in this scheme. */
|
||||
#define APP_CMD 0x0040
|
||||
#define RESP_NONE 0x0300
|
||||
#define RESP_R1 0x0400
|
||||
#define RESP_R1B 0x0500
|
||||
#define RESP_R2 0x0600
|
||||
#define RESP_R3 0x0700
|
||||
#define DATA_PRESENT 0x0800
|
||||
#define TRANSFER_READ 0x1000
|
||||
#define TRANSFER_MULTI 0x2000
|
||||
#define SECURITY_CMD 0x4000
|
||||
|
||||
static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
|
||||
{
|
||||
struct mmc_data *data = host->data;
|
||||
int c = cmd->opcode;
|
||||
|
||||
/* Command 12 is handled by hardware */
|
||||
if (cmd->opcode == 12 && !cmd->arg) {
|
||||
sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001);
|
||||
return 0;
|
||||
}
|
||||
|
||||
switch (mmc_resp_type(cmd)) {
|
||||
case MMC_RSP_NONE: c |= RESP_NONE; break;
|
||||
case MMC_RSP_R1: c |= RESP_R1; break;
|
||||
case MMC_RSP_R1B: c |= RESP_R1B; break;
|
||||
case MMC_RSP_R2: c |= RESP_R2; break;
|
||||
case MMC_RSP_R3: c |= RESP_R3; break;
|
||||
default:
|
||||
pr_debug("Unknown response type %d\n", mmc_resp_type(cmd));
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
host->cmd = cmd;
|
||||
|
||||
/* FIXME - this seems to be ok commented out but the spec suggest this bit
|
||||
* should be set when issuing app commands.
|
||||
* if(cmd->flags & MMC_FLAG_ACMD)
|
||||
* c |= APP_CMD;
|
||||
*/
|
||||
if (data) {
|
||||
c |= DATA_PRESENT;
|
||||
if (data->blocks > 1) {
|
||||
sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100);
|
||||
c |= TRANSFER_MULTI;
|
||||
}
|
||||
if (data->flags & MMC_DATA_READ)
|
||||
c |= TRANSFER_READ;
|
||||
}
|
||||
|
||||
tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_CMD);
|
||||
|
||||
/* Fire off the command */
|
||||
sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg);
|
||||
sd_ctrl_write16(host, CTL_SD_CMD, c);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* This chip always returns (at least?) as much data as you ask for.
|
||||
* I'm unsure what happens if you ask for less than a block. This should be
|
||||
* looked into to ensure that a funny length read doesnt hose the controller.
|
||||
*/
|
||||
static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
|
||||
{
|
||||
struct mmc_data *data = host->data;
|
||||
void *sg_virt;
|
||||
unsigned short *buf;
|
||||
unsigned int count;
|
||||
unsigned long flags;
|
||||
|
||||
if ((host->chan_tx || host->chan_rx) && !host->force_pio) {
|
||||
pr_err("PIO IRQ in DMA mode!\n");
|
||||
return;
|
||||
} else if (!data) {
|
||||
pr_debug("Spurious PIO IRQ\n");
|
||||
return;
|
||||
}
|
||||
|
||||
sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags);
|
||||
buf = (unsigned short *)(sg_virt + host->sg_off);
|
||||
|
||||
count = host->sg_ptr->length - host->sg_off;
|
||||
if (count > data->blksz)
|
||||
count = data->blksz;
|
||||
|
||||
pr_debug("count: %08x offset: %08x flags %08x\n",
|
||||
count, host->sg_off, data->flags);
|
||||
|
||||
/* Transfer the data */
|
||||
if (data->flags & MMC_DATA_READ)
|
||||
sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
|
||||
else
|
||||
sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
|
||||
|
||||
host->sg_off += count;
|
||||
|
||||
tmio_mmc_kunmap_atomic(host->sg_ptr, &flags, sg_virt);
|
||||
|
||||
if (host->sg_off == host->sg_ptr->length)
|
||||
tmio_mmc_next_sg(host);
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
static void tmio_mmc_check_bounce_buffer(struct tmio_mmc_host *host)
|
||||
{
|
||||
if (host->sg_ptr == &host->bounce_sg) {
|
||||
unsigned long flags;
|
||||
void *sg_vaddr = tmio_mmc_kmap_atomic(host->sg_orig, &flags);
|
||||
memcpy(sg_vaddr, host->bounce_buf, host->bounce_sg.length);
|
||||
tmio_mmc_kunmap_atomic(host->sg_orig, &flags, sg_vaddr);
|
||||
}
|
||||
}
|
||||
|
||||
/* needs to be called with host->lock held */
|
||||
void tmio_mmc_do_data_irq(struct tmio_mmc_host *host)
|
||||
{
|
||||
struct mmc_data *data = host->data;
|
||||
struct mmc_command *stop;
|
||||
|
||||
host->data = NULL;
|
||||
|
||||
if (!data) {
|
||||
dev_warn(&host->pdev->dev, "Spurious data end IRQ\n");
|
||||
return;
|
||||
}
|
||||
stop = data->stop;
|
||||
|
||||
/* FIXME - return correct transfer count on errors */
|
||||
if (!data->error)
|
||||
data->bytes_xfered = data->blocks * data->blksz;
|
||||
else
|
||||
data->bytes_xfered = 0;
|
||||
|
||||
pr_debug("Completed data request\n");
|
||||
|
||||
/*
|
||||
* FIXME: other drivers allow an optional stop command of any given type
|
||||
* which we dont do, as the chip can auto generate them.
|
||||
* Perhaps we can be smarter about when to use auto CMD12 and
|
||||
* only issue the auto request when we know this is the desired
|
||||
* stop command, allowing fallback to the stop command the
|
||||
* upper layers expect. For now, we do what works.
|
||||
*/
|
||||
|
||||
if (data->flags & MMC_DATA_READ) {
|
||||
if (host->chan_rx && !host->force_pio)
|
||||
tmio_mmc_check_bounce_buffer(host);
|
||||
dev_dbg(&host->pdev->dev, "Complete Rx request %p\n",
|
||||
host->mrq);
|
||||
} else {
|
||||
dev_dbg(&host->pdev->dev, "Complete Tx request %p\n",
|
||||
host->mrq);
|
||||
}
|
||||
|
||||
if (stop) {
|
||||
if (stop->opcode == 12 && !stop->arg)
|
||||
sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000);
|
||||
else
|
||||
BUG();
|
||||
}
|
||||
|
||||
tmio_mmc_finish_request(host);
|
||||
}
|
||||
|
||||
static void tmio_mmc_data_irq(struct tmio_mmc_host *host)
|
||||
{
|
||||
struct mmc_data *data;
|
||||
spin_lock(&host->lock);
|
||||
data = host->data;
|
||||
|
||||
if (!data)
|
||||
goto out;
|
||||
|
||||
if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) {
|
||||
/*
|
||||
* Has all data been written out yet? Testing on SuperH showed,
|
||||
* that in most cases the first interrupt comes already with the
|
||||
* BUSY status bit clear, but on some operations, like mount or
|
||||
* in the beginning of a write / sync / umount, there is one
|
||||
* DATAEND interrupt with the BUSY bit set, in this cases
|
||||
* waiting for one more interrupt fixes the problem.
|
||||
*/
|
||||
if (!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_CMD_BUSY)) {
|
||||
tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
|
||||
tasklet_schedule(&host->dma_complete);
|
||||
}
|
||||
} else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) {
|
||||
tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
|
||||
tasklet_schedule(&host->dma_complete);
|
||||
} else {
|
||||
tmio_mmc_do_data_irq(host);
|
||||
tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP);
|
||||
}
|
||||
out:
|
||||
spin_unlock(&host->lock);
|
||||
}
|
||||
|
||||
static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
|
||||
unsigned int stat)
|
||||
{
|
||||
struct mmc_command *cmd = host->cmd;
|
||||
int i, addr;
|
||||
|
||||
spin_lock(&host->lock);
|
||||
|
||||
if (!host->cmd) {
|
||||
pr_debug("Spurious CMD irq\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
host->cmd = NULL;
|
||||
|
||||
/* This controller is sicker than the PXA one. Not only do we need to
|
||||
* drop the top 8 bits of the first response word, we also need to
|
||||
* modify the order of the response for short response command types.
|
||||
*/
|
||||
|
||||
for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
|
||||
cmd->resp[i] = sd_ctrl_read32(host, addr);
|
||||
|
||||
if (cmd->flags & MMC_RSP_136) {
|
||||
cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
|
||||
cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24);
|
||||
cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24);
|
||||
cmd->resp[3] <<= 8;
|
||||
} else if (cmd->flags & MMC_RSP_R3) {
|
||||
cmd->resp[0] = cmd->resp[3];
|
||||
}
|
||||
|
||||
if (stat & TMIO_STAT_CMDTIMEOUT)
|
||||
cmd->error = -ETIMEDOUT;
|
||||
else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC)
|
||||
cmd->error = -EILSEQ;
|
||||
|
||||
/* If there is data to handle we enable data IRQs here, and
|
||||
* we will ultimatley finish the request in the data_end handler.
|
||||
* If theres no data or we encountered an error, finish now.
|
||||
*/
|
||||
if (host->data && !cmd->error) {
|
||||
if (host->data->flags & MMC_DATA_READ) {
|
||||
if (host->force_pio || !host->chan_rx)
|
||||
tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_READOP);
|
||||
else
|
||||
tasklet_schedule(&host->dma_issue);
|
||||
} else {
|
||||
if (host->force_pio || !host->chan_tx)
|
||||
tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_WRITEOP);
|
||||
else
|
||||
tasklet_schedule(&host->dma_issue);
|
||||
}
|
||||
} else {
|
||||
tmio_mmc_finish_request(host);
|
||||
}
|
||||
|
||||
out:
|
||||
spin_unlock(&host->lock);
|
||||
}
|
||||
|
||||
static irqreturn_t tmio_mmc_irq(int irq, void *devid)
|
||||
{
|
||||
struct tmio_mmc_host *host = devid;
|
||||
struct tmio_mmc_data *pdata = host->pdata;
|
||||
unsigned int ireg, irq_mask, status;
|
||||
unsigned int sdio_ireg, sdio_irq_mask, sdio_status;
|
||||
|
||||
pr_debug("MMC IRQ begin\n");
|
||||
|
||||
status = sd_ctrl_read32(host, CTL_STATUS);
|
||||
irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
|
||||
ireg = status & TMIO_MASK_IRQ & ~irq_mask;
|
||||
|
||||
sdio_ireg = 0;
|
||||
if (!ireg && pdata->flags & TMIO_MMC_SDIO_IRQ) {
|
||||
sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
|
||||
sdio_irq_mask = sd_ctrl_read16(host, CTL_SDIO_IRQ_MASK);
|
||||
sdio_ireg = sdio_status & TMIO_SDIO_MASK_ALL & ~sdio_irq_mask;
|
||||
|
||||
sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status & ~TMIO_SDIO_MASK_ALL);
|
||||
|
||||
if (sdio_ireg && !host->sdio_irq_enabled) {
|
||||
pr_warning("tmio_mmc: Spurious SDIO IRQ, disabling! 0x%04x 0x%04x 0x%04x\n",
|
||||
sdio_status, sdio_irq_mask, sdio_ireg);
|
||||
tmio_mmc_enable_sdio_irq(host->mmc, 0);
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (host->mmc->caps & MMC_CAP_SDIO_IRQ &&
|
||||
sdio_ireg & TMIO_SDIO_STAT_IOIRQ)
|
||||
mmc_signal_sdio_irq(host->mmc);
|
||||
|
||||
if (sdio_ireg)
|
||||
goto out;
|
||||
}
|
||||
|
||||
pr_debug_status(status);
|
||||
pr_debug_status(ireg);
|
||||
|
||||
if (!ireg) {
|
||||
tmio_mmc_disable_mmc_irqs(host, status & ~irq_mask);
|
||||
|
||||
pr_warning("tmio_mmc: Spurious irq, disabling! "
|
||||
"0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
|
||||
pr_debug_status(status);
|
||||
|
||||
goto out;
|
||||
}
|
||||
|
||||
while (ireg) {
|
||||
/* Card insert / remove attempts */
|
||||
if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
|
||||
tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT |
|
||||
TMIO_STAT_CARD_REMOVE);
|
||||
mmc_detect_change(host->mmc, msecs_to_jiffies(100));
|
||||
}
|
||||
|
||||
/* CRC and other errors */
|
||||
/* if (ireg & TMIO_STAT_ERR_IRQ)
|
||||
* handled |= tmio_error_irq(host, irq, stat);
|
||||
*/
|
||||
|
||||
/* Command completion */
|
||||
if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) {
|
||||
tmio_mmc_ack_mmc_irqs(host,
|
||||
TMIO_STAT_CMDRESPEND |
|
||||
TMIO_STAT_CMDTIMEOUT);
|
||||
tmio_mmc_cmd_irq(host, status);
|
||||
}
|
||||
|
||||
/* Data transfer */
|
||||
if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
|
||||
tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
|
||||
tmio_mmc_pio_irq(host);
|
||||
}
|
||||
|
||||
/* Data transfer completion */
|
||||
if (ireg & TMIO_STAT_DATAEND) {
|
||||
tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND);
|
||||
tmio_mmc_data_irq(host);
|
||||
}
|
||||
|
||||
/* Check status - keep going until we've handled it all */
|
||||
status = sd_ctrl_read32(host, CTL_STATUS);
|
||||
irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
|
||||
ireg = status & TMIO_MASK_IRQ & ~irq_mask;
|
||||
|
||||
pr_debug("Status at end of loop: %08x\n", status);
|
||||
pr_debug_status(status);
|
||||
}
|
||||
pr_debug("MMC IRQ end\n");
|
||||
|
||||
out:
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int tmio_mmc_start_data(struct tmio_mmc_host *host,
|
||||
struct mmc_data *data)
|
||||
{
|
||||
struct tmio_mmc_data *pdata = host->pdata;
|
||||
|
||||
pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n",
|
||||
data->blksz, data->blocks);
|
||||
|
||||
/* Some hardware cannot perform 2 byte requests in 4 bit mode */
|
||||
if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
|
||||
int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES;
|
||||
|
||||
if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) {
|
||||
pr_err("%s: %d byte block unsupported in 4 bit mode\n",
|
||||
mmc_hostname(host->mmc), data->blksz);
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
tmio_mmc_init_sg(host, data);
|
||||
host->data = data;
|
||||
|
||||
/* Set transfer length / blocksize */
|
||||
sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
|
||||
sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
|
||||
|
||||
tmio_mmc_start_dma(host, data);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Process requests from the MMC layer */
|
||||
static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
||||
{
|
||||
struct tmio_mmc_host *host = mmc_priv(mmc);
|
||||
int ret;
|
||||
|
||||
if (host->mrq)
|
||||
pr_debug("request not null\n");
|
||||
|
||||
host->last_req_ts = jiffies;
|
||||
wmb();
|
||||
host->mrq = mrq;
|
||||
|
||||
if (mrq->data) {
|
||||
ret = tmio_mmc_start_data(host, mrq->data);
|
||||
if (ret)
|
||||
goto fail;
|
||||
}
|
||||
|
||||
ret = tmio_mmc_start_command(host, mrq->cmd);
|
||||
if (!ret) {
|
||||
schedule_delayed_work(&host->delayed_reset_work,
|
||||
msecs_to_jiffies(2000));
|
||||
return;
|
||||
}
|
||||
|
||||
fail:
|
||||
host->mrq = NULL;
|
||||
host->force_pio = false;
|
||||
mrq->cmd->error = ret;
|
||||
mmc_request_done(mmc, mrq);
|
||||
}
|
||||
|
||||
/* Set MMC clock / power.
|
||||
* Note: This controller uses a simple divider scheme therefore it cannot
|
||||
* run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
|
||||
* MMC wont run that fast, it has to be clocked at 12MHz which is the next
|
||||
* slowest setting.
|
||||
*/
|
||||
static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
||||
{
|
||||
struct tmio_mmc_host *host = mmc_priv(mmc);
|
||||
|
||||
if (ios->clock)
|
||||
tmio_mmc_set_clock(host, ios->clock);
|
||||
|
||||
/* Power sequence - OFF -> ON -> UP */
|
||||
switch (ios->power_mode) {
|
||||
case MMC_POWER_OFF: /* power down SD bus */
|
||||
if (host->set_pwr)
|
||||
host->set_pwr(host->pdev, 0);
|
||||
tmio_mmc_clk_stop(host);
|
||||
break;
|
||||
case MMC_POWER_ON: /* power up SD bus */
|
||||
if (host->set_pwr)
|
||||
host->set_pwr(host->pdev, 1);
|
||||
break;
|
||||
case MMC_POWER_UP: /* start bus clock */
|
||||
tmio_mmc_clk_start(host);
|
||||
break;
|
||||
}
|
||||
|
||||
switch (ios->bus_width) {
|
||||
case MMC_BUS_WIDTH_1:
|
||||
sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
|
||||
break;
|
||||
case MMC_BUS_WIDTH_4:
|
||||
sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
|
||||
break;
|
||||
}
|
||||
|
||||
/* Let things settle. delay taken from winCE driver */
|
||||
udelay(140);
|
||||
}
|
||||
|
||||
static int tmio_mmc_get_ro(struct mmc_host *mmc)
|
||||
{
|
||||
struct tmio_mmc_host *host = mmc_priv(mmc);
|
||||
struct tmio_mmc_data *pdata = host->pdata;
|
||||
|
||||
return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
|
||||
!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
|
||||
}
|
||||
|
||||
static int tmio_mmc_get_cd(struct mmc_host *mmc)
|
||||
{
|
||||
struct tmio_mmc_host *host = mmc_priv(mmc);
|
||||
struct tmio_mmc_data *pdata = host->pdata;
|
||||
|
||||
if (!pdata->get_cd)
|
||||
return -ENOSYS;
|
||||
else
|
||||
return pdata->get_cd(host->pdev);
|
||||
}
|
||||
|
||||
static const struct mmc_host_ops tmio_mmc_ops = {
|
||||
.request = tmio_mmc_request,
|
||||
.set_ios = tmio_mmc_set_ios,
|
||||
.get_ro = tmio_mmc_get_ro,
|
||||
.get_cd = tmio_mmc_get_cd,
|
||||
.enable_sdio_irq = tmio_mmc_enable_sdio_irq,
|
||||
};
|
||||
|
||||
int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
|
||||
struct platform_device *pdev,
|
||||
struct tmio_mmc_data *pdata)
|
||||
{
|
||||
struct tmio_mmc_host *_host;
|
||||
struct mmc_host *mmc;
|
||||
struct resource *res_ctl;
|
||||
int ret;
|
||||
u32 irq_mask = TMIO_MASK_CMD;
|
||||
|
||||
res_ctl = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!res_ctl)
|
||||
return -EINVAL;
|
||||
|
||||
mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &pdev->dev);
|
||||
if (!mmc)
|
||||
return -ENOMEM;
|
||||
|
||||
_host = mmc_priv(mmc);
|
||||
_host->pdata = pdata;
|
||||
_host->mmc = mmc;
|
||||
_host->pdev = pdev;
|
||||
platform_set_drvdata(pdev, mmc);
|
||||
|
||||
_host->set_pwr = pdata->set_pwr;
|
||||
_host->set_clk_div = pdata->set_clk_div;
|
||||
|
||||
/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
|
||||
_host->bus_shift = resource_size(res_ctl) >> 10;
|
||||
|
||||
_host->ctl = ioremap(res_ctl->start, resource_size(res_ctl));
|
||||
if (!_host->ctl) {
|
||||
ret = -ENOMEM;
|
||||
goto host_free;
|
||||
}
|
||||
|
||||
mmc->ops = &tmio_mmc_ops;
|
||||
mmc->caps = MMC_CAP_4_BIT_DATA | pdata->capabilities;
|
||||
mmc->f_max = pdata->hclk;
|
||||
mmc->f_min = mmc->f_max / 512;
|
||||
mmc->max_segs = 32;
|
||||
mmc->max_blk_size = 512;
|
||||
mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) *
|
||||
mmc->max_segs;
|
||||
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
|
||||
mmc->max_seg_size = mmc->max_req_size;
|
||||
if (pdata->ocr_mask)
|
||||
mmc->ocr_avail = pdata->ocr_mask;
|
||||
else
|
||||
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
|
||||
|
||||
tmio_mmc_clk_stop(_host);
|
||||
tmio_mmc_reset(_host);
|
||||
|
||||
ret = platform_get_irq(pdev, 0);
|
||||
if (ret < 0)
|
||||
goto unmap_ctl;
|
||||
|
||||
_host->irq = ret;
|
||||
|
||||
tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
|
||||
if (pdata->flags & TMIO_MMC_SDIO_IRQ)
|
||||
tmio_mmc_enable_sdio_irq(mmc, 0);
|
||||
|
||||
ret = request_irq(_host->irq, tmio_mmc_irq, IRQF_DISABLED |
|
||||
IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), _host);
|
||||
if (ret)
|
||||
goto unmap_ctl;
|
||||
|
||||
spin_lock_init(&_host->lock);
|
||||
|
||||
/* Init delayed work for request timeouts */
|
||||
INIT_DELAYED_WORK(&_host->delayed_reset_work, tmio_mmc_reset_work);
|
||||
|
||||
/* See if we also get DMA */
|
||||
tmio_mmc_request_dma(_host, pdata);
|
||||
|
||||
mmc_add_host(mmc);
|
||||
|
||||
/* Unmask the IRQs we want to know about */
|
||||
if (!_host->chan_rx)
|
||||
irq_mask |= TMIO_MASK_READOP;
|
||||
if (!_host->chan_tx)
|
||||
irq_mask |= TMIO_MASK_WRITEOP;
|
||||
|
||||
tmio_mmc_enable_mmc_irqs(_host, irq_mask);
|
||||
|
||||
*host = _host;
|
||||
|
||||
return 0;
|
||||
|
||||
unmap_ctl:
|
||||
iounmap(_host->ctl);
|
||||
host_free:
|
||||
mmc_free_host(mmc);
|
||||
|
||||
return ret;
|
||||
}
|
||||
EXPORT_SYMBOL(tmio_mmc_host_probe);
|
||||
|
||||
void tmio_mmc_host_remove(struct tmio_mmc_host *host)
|
||||
{
|
||||
mmc_remove_host(host->mmc);
|
||||
cancel_delayed_work_sync(&host->delayed_reset_work);
|
||||
tmio_mmc_release_dma(host);
|
||||
free_irq(host->irq, host);
|
||||
iounmap(host->ctl);
|
||||
mmc_free_host(host->mmc);
|
||||
}
|
||||
EXPORT_SYMBOL(tmio_mmc_host_remove);
|
||||
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue
Block a user