mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 08:20:50 +07:00
ALSA: azt3328: add custom AC97 semi-emulation use standard ALSA AC97 layer
Make use of the very flexible ALSA ac97 layer (hooks for custom I/O!) on this weird AC97 copycat hardware, via semi-extended I/O translation/emulation. Some 5kB binary/loaded size saved (well... additional huge AC97 module penalty not factored in, of course ;-P). Given that the driver previously had 20kB that's not bad, but the much more important thing is to have AC97 layer stress-tested with a thoroughly weird AC97 copycat (or, simply put, if it were not for this AC97 test aspect, this effort would merely have been a nut job ;). Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Andreas Mohr
Takashi Iwai
parent
03c2d87a21
commit
b5dc20cd21
@ -152,10 +152,16 @@ config SND_AZT3328
|
||||
select SND_MPU401_UART
|
||||
select SND_PCM
|
||||
select SND_RAWMIDI
|
||||
select SND_AC97_CODEC
|
||||
help
|
||||
Say Y here to include support for Aztech AZF3328 (PCI168)
|
||||
soundcards.
|
||||
|
||||
Supported features: AC97-"conformant" mixer, MPU401/OPL3, analog I/O
|
||||
(16bit/8bit, many sample rates [<= 66.2kHz], NO hardware mixing),
|
||||
Digital Enhanced Game Port, 1.024MHz multimedia sequencer timer,
|
||||
ext. codec (I2S port), onboard amp (4W/4Ohms/ch), suspend/resume.
|
||||
|
||||
To compile this driver as a module, choose M here: the module
|
||||
will be called snd-azt3328.
|
||||
|
||||
|
||||
@ -1,6 +1,5 @@
|
||||
/*
|
||||
* azt3328.c - driver for Aztech AZF3328 based soundcards (e.g. PCI168).
|
||||
* Copyright (C) 2002, 2005 - 2010 by Andreas Mohr <andi AT lisas.de>
|
||||
/* azt3328.c - driver for Aztech AZF3328 based soundcards (e.g. PCI168).
|
||||
* Copyright (C) 2002, 2005 - 2011 by Andreas Mohr <andi AT lisas.de>
|
||||
*
|
||||
* Framework borrowed from Bart Hartgers's als4000.c.
|
||||
* Driver developed on PCI168 AP(W) version (PCI rev. 10, subsystem ID 1801),
|
||||
@ -66,6 +65,13 @@
|
||||
* addresses illegally. So far unfortunately it looks like the very flexible
|
||||
* ALSA AC97 support is still not enough to easily compensate for such a
|
||||
* grave layout violation despite all tweaks and quirks mechanisms it offers.
|
||||
* Well, not quite: now ac97 layer is much improved (bus-specific ops!),
|
||||
* thus I was able to implement support - it's actually working quite well.
|
||||
* An interesting item might be Aztech AMR 2800-W, since it's an AC97
|
||||
* modem card which might reveal the Aztech-specific codec ID which
|
||||
* we might want to pretend, too. Dito PCI168's brother, PCI368,
|
||||
* where the advertising datasheet says it's AC97-based and has a
|
||||
* Digital Enhanced Game Port.
|
||||
* - builtin genuine OPL3 - verified to work fine, 20080506
|
||||
* - full duplex 16bit playback/record at independent sampling rate
|
||||
* - MPU401 (+ legacy address support, claimed by one official spec sheet)
|
||||
@ -189,6 +195,16 @@
|
||||
#include <sound/mpu401.h>
|
||||
#include <sound/opl3.h>
|
||||
#include <sound/initval.h>
|
||||
/*
|
||||
* Config switch, to use ALSA's AC97 layer instead of old custom mixer crap.
|
||||
* If the AC97 compatibility parts we needed to implement locally turn out
|
||||
* to work nicely, then remove the old implementation eventually.
|
||||
*/
|
||||
#define AZF_USE_AC97_LAYER 1
|
||||
|
||||
#ifdef AZF_USE_AC97_LAYER
|
||||
#include <sound/ac97_codec.h>
|
||||
#endif
|
||||
#include "azt3328.h"
|
||||
|
||||
MODULE_AUTHOR("Andreas Mohr <andi AT lisas.de>");
|
||||
@ -328,6 +344,10 @@ struct snd_azf3328 {
|
||||
/* playback, recording and I2S out codecs */
|
||||
struct snd_azf3328_codec_data codecs[3];
|
||||
|
||||
#ifdef AZF_USE_AC97_LAYER
|
||||
struct snd_ac97 *ac97;
|
||||
#endif
|
||||
|
||||
struct snd_card *card;
|
||||
struct snd_rawmidi *rmidi;
|
||||
|
||||
@ -506,7 +526,7 @@ snd_azf3328_mixer_inw(const struct snd_azf3328 *chip, unsigned reg)
|
||||
#define AZF_MUTE_BIT 0x80
|
||||
|
||||
static bool
|
||||
snd_azf3328_mixer_set_mute(const struct snd_azf3328 *chip,
|
||||
snd_azf3328_mixer_mute_control(const struct snd_azf3328 *chip,
|
||||
unsigned reg, bool do_mute
|
||||
)
|
||||
{
|
||||
@ -521,6 +541,323 @@ snd_azf3328_mixer_set_mute(const struct snd_azf3328 *chip,
|
||||
return (do_mute) ? !updated : updated;
|
||||
}
|
||||
|
||||
static inline bool
|
||||
snd_azf3328_mixer_mute_control_master(const struct snd_azf3328 *chip,
|
||||
bool do_mute
|
||||
)
|
||||
{
|
||||
return snd_azf3328_mixer_mute_control(
|
||||
chip,
|
||||
IDX_MIXER_PLAY_MASTER,
|
||||
do_mute
|
||||
);
|
||||
}
|
||||
|
||||
static inline bool
|
||||
snd_azf3328_mixer_mute_control_pcm(const struct snd_azf3328 *chip,
|
||||
bool do_mute
|
||||
)
|
||||
{
|
||||
return snd_azf3328_mixer_mute_control(
|
||||
chip,
|
||||
IDX_MIXER_WAVEOUT,
|
||||
do_mute
|
||||
);
|
||||
}
|
||||
|
||||
static inline void
|
||||
snd_azf3328_mixer_reset(const struct snd_azf3328 *chip)
|
||||
{
|
||||
/* reset (close) mixer:
|
||||
* first mute master volume, then reset
|
||||
*/
|
||||
snd_azf3328_mixer_mute_control_master(chip, 1);
|
||||
snd_azf3328_mixer_outw(chip, IDX_MIXER_RESET, 0x0000);
|
||||
}
|
||||
|
||||
#ifdef AZF_USE_AC97_LAYER
|
||||
|
||||
static inline void
|
||||
snd_azf3328_mixer_ac97_map_unsupported(unsigned short reg, const char *mode)
|
||||
{
|
||||
/* need to add some more or less clever emulation? */
|
||||
printk(KERN_WARNING
|
||||
"azt3328: missing %s emulation for AC97 register 0x%02x!\n",
|
||||
mode, reg);
|
||||
}
|
||||
|
||||
/*
|
||||
* Need to have _special_ AC97 mixer hardware register index mapper,
|
||||
* to compensate for the issue of a rather AC97-incompatible hardware layout.
|
||||
*/
|
||||
#define AZF_REG_MASK 0x3f
|
||||
#define AZF_AC97_REG_UNSUPPORTED 0x8000
|
||||
#define AZF_AC97_REG_REAL_IO_READ 0x4000
|
||||
#define AZF_AC97_REG_REAL_IO_WRITE 0x2000
|
||||
#define AZF_AC97_REG_REAL_IO_RW \
|
||||
(AZF_AC97_REG_REAL_IO_READ | AZF_AC97_REG_REAL_IO_WRITE)
|
||||
#define AZF_AC97_REG_EMU_IO_READ 0x0400
|
||||
#define AZF_AC97_REG_EMU_IO_WRITE 0x0200
|
||||
#define AZF_AC97_REG_EMU_IO_RW \
|
||||
(AZF_AC97_REG_EMU_IO_READ | AZF_AC97_REG_EMU_IO_WRITE)
|
||||
static unsigned short
|
||||
snd_azf3328_mixer_ac97_map_reg_idx(unsigned short reg)
|
||||
{
|
||||
static const struct {
|
||||
unsigned short azf_reg;
|
||||
} azf_reg_mapper[] = {
|
||||
/* Especially when taking into consideration
|
||||
* mono/stereo-based sequence of azf vs. AC97 control series,
|
||||
* it's quite obvious that azf simply got rid
|
||||
* of the AC97_HEADPHONE control at its intended offset,
|
||||
* thus shifted _all_ controls by one,
|
||||
* and _then_ simply added it as an FMSYNTH control at the end,
|
||||
* to make up for the offset.
|
||||
* This means we'll have to translate indices here as
|
||||
* needed and then do some tiny AC97 patch action
|
||||
* (snd_ac97_rename_vol_ctl() etc.) - that's it.
|
||||
*/
|
||||
{ /* AC97_RESET */ IDX_MIXER_RESET
|
||||
| AZF_AC97_REG_REAL_IO_WRITE
|
||||
| AZF_AC97_REG_EMU_IO_READ },
|
||||
{ /* AC97_MASTER */ IDX_MIXER_PLAY_MASTER },
|
||||
/* note large shift: AC97_HEADPHONE to IDX_MIXER_FMSYNTH! */
|
||||
{ /* AC97_HEADPHONE */ IDX_MIXER_FMSYNTH },
|
||||
{ /* AC97_MASTER_MONO */ IDX_MIXER_MODEMOUT },
|
||||
{ /* AC97_MASTER_TONE */ IDX_MIXER_BASSTREBLE },
|
||||
{ /* AC97_PC_BEEP */ IDX_MIXER_PCBEEP },
|
||||
{ /* AC97_PHONE */ IDX_MIXER_MODEMIN },
|
||||
{ /* AC97_MIC */ IDX_MIXER_MIC },
|
||||
{ /* AC97_LINE */ IDX_MIXER_LINEIN },
|
||||
{ /* AC97_CD */ IDX_MIXER_CDAUDIO },
|
||||
{ /* AC97_VIDEO */ IDX_MIXER_VIDEO },
|
||||
{ /* AC97_AUX */ IDX_MIXER_AUX },
|
||||
{ /* AC97_PCM */ IDX_MIXER_WAVEOUT },
|
||||
{ /* AC97_REC_SEL */ IDX_MIXER_REC_SELECT },
|
||||
{ /* AC97_REC_GAIN */ IDX_MIXER_REC_VOLUME },
|
||||
{ /* AC97_REC_GAIN_MIC */ AZF_AC97_REG_EMU_IO_RW },
|
||||
{ /* AC97_GENERAL_PURPOSE */ IDX_MIXER_ADVCTL2 },
|
||||
{ /* AC97_3D_CONTROL */ IDX_MIXER_ADVCTL1 },
|
||||
};
|
||||
|
||||
unsigned short reg_azf = AZF_AC97_REG_UNSUPPORTED;
|
||||
|
||||
/* azf3328 supports the low-numbered and low-spec:ed range
|
||||
of AC97 regs only */
|
||||
if (reg <= AC97_3D_CONTROL) {
|
||||
unsigned short reg_idx = reg / 2;
|
||||
reg_azf = azf_reg_mapper[reg_idx].azf_reg;
|
||||
/* a translation-only entry means it's real read/write: */
|
||||
if (!(reg_azf & ~AZF_REG_MASK))
|
||||
reg_azf |= AZF_AC97_REG_REAL_IO_RW;
|
||||
} else {
|
||||
switch (reg) {
|
||||
case AC97_POWERDOWN:
|
||||
reg_azf = AZF_AC97_REG_EMU_IO_RW;
|
||||
break;
|
||||
case AC97_EXTENDED_ID:
|
||||
reg_azf = AZF_AC97_REG_EMU_IO_READ;
|
||||
break;
|
||||
case AC97_EXTENDED_STATUS:
|
||||
/* I don't know what the h*ll AC97 layer
|
||||
* would consult this _extended_ register for
|
||||
* given a base-AC97-advertised card,
|
||||
* but let's just emulate it anyway :-P
|
||||
*/
|
||||
reg_azf = AZF_AC97_REG_EMU_IO_RW;
|
||||
break;
|
||||
case AC97_VENDOR_ID1:
|
||||
case AC97_VENDOR_ID2:
|
||||
reg_azf = AZF_AC97_REG_EMU_IO_READ;
|
||||
break;
|
||||
}
|
||||
}
|
||||
return reg_azf;
|
||||
}
|
||||
|
||||
static const unsigned short
|
||||
azf_emulated_ac97_caps =
|
||||
AC97_BC_DEDICATED_MIC |
|
||||
AC97_BC_BASS_TREBLE |
|
||||
/* Headphone is an FM Synth control here */
|
||||
AC97_BC_HEADPHONE |
|
||||
/* no AC97_BC_LOUDNESS! */
|
||||
/* mask 0x7c00 is
|
||||
vendor-specific 3D enhancement
|
||||
vendor indicator.
|
||||
Since there actually _is_ an
|
||||
entry for Aztech Labs
|
||||
(13), make damn sure
|
||||
to indicate it. */
|
||||
(13 << 10);
|
||||
|
||||
static const unsigned short
|
||||
azf_emulated_ac97_powerdown =
|
||||
/* pretend everything to be active */
|
||||
AC97_PD_ADC_STATUS |
|
||||
AC97_PD_DAC_STATUS |
|
||||
AC97_PD_MIXER_STATUS |
|
||||
AC97_PD_VREF_STATUS;
|
||||
|
||||
/*
|
||||
* Emulated, _inofficial_ vendor ID
|
||||
* (there might be some devices such as the MR 2800-W
|
||||
* which could reveal the real Aztech AC97 ID).
|
||||
* We choose to use "AZT" prefix, and then use 1 to indicate PCI168
|
||||
* (better don't use 0x68 since there's a PCI368 as well).
|
||||
*/
|
||||
static const unsigned int
|
||||
azf_emulated_ac97_vendor_id = 0x415a5401;
|
||||
|
||||
static unsigned short
|
||||
snd_azf3328_mixer_ac97_read(struct snd_ac97 *ac97, unsigned short reg_ac97)
|
||||
{
|
||||
const struct snd_azf3328 *chip = ac97->private_data;
|
||||
unsigned short reg_azf = snd_azf3328_mixer_ac97_map_reg_idx(reg_ac97);
|
||||
unsigned short reg_val = 0;
|
||||
bool unsupported = 0;
|
||||
|
||||
snd_azf3328_dbgmixer(
|
||||
"snd_azf3328_mixer_ac97_read reg_ac97 %u\n",
|
||||
reg_ac97
|
||||
);
|
||||
if (reg_azf & AZF_AC97_REG_UNSUPPORTED)
|
||||
unsupported = 1;
|
||||
else {
|
||||
if (reg_azf & AZF_AC97_REG_REAL_IO_READ)
|
||||
reg_val = snd_azf3328_mixer_inw(chip,
|
||||
reg_azf & AZF_REG_MASK);
|
||||
else {
|
||||
/*
|
||||
* Proceed with dummy I/O read,
|
||||
* to ensure compatible timing where this may matter.
|
||||
* (ALSA AC97 layer usually doesn't call I/O functions
|
||||
* due to intelligent I/O caching anyway)
|
||||
* Choose a mixer register that's thoroughly unrelated
|
||||
* to common audio (try to minimize distortion).
|
||||
*/
|
||||
snd_azf3328_mixer_inw(chip, IDX_MIXER_SOMETHING30H);
|
||||
}
|
||||
|
||||
if (reg_azf & AZF_AC97_REG_EMU_IO_READ) {
|
||||
switch (reg_ac97) {
|
||||
case AC97_RESET:
|
||||
reg_val |= azf_emulated_ac97_caps;
|
||||
break;
|
||||
case AC97_POWERDOWN:
|
||||
reg_val |= azf_emulated_ac97_powerdown;
|
||||
break;
|
||||
case AC97_EXTENDED_ID:
|
||||
case AC97_EXTENDED_STATUS:
|
||||
/* AFAICS we simply can't support anything: */
|
||||
reg_val |= 0;
|
||||
break;
|
||||
case AC97_VENDOR_ID1:
|
||||
reg_val = azf_emulated_ac97_vendor_id >> 16;
|
||||
break;
|
||||
case AC97_VENDOR_ID2:
|
||||
reg_val = azf_emulated_ac97_vendor_id & 0xffff;
|
||||
break;
|
||||
default:
|
||||
unsupported = 1;
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
if (unsupported)
|
||||
snd_azf3328_mixer_ac97_map_unsupported(reg_ac97, "read");
|
||||
|
||||
return reg_val;
|
||||
}
|
||||
|
||||
static void
|
||||
snd_azf3328_mixer_ac97_write(struct snd_ac97 *ac97,
|
||||
unsigned short reg_ac97, unsigned short val)
|
||||
{
|
||||
const struct snd_azf3328 *chip = ac97->private_data;
|
||||
unsigned short reg_azf = snd_azf3328_mixer_ac97_map_reg_idx(reg_ac97);
|
||||
bool unsupported = 0;
|
||||
|
||||
snd_azf3328_dbgmixer(
|
||||
"snd_azf3328_mixer_ac97_write reg_ac97 %u val %u\n",
|
||||
reg_ac97, val
|
||||
);
|
||||
if (reg_azf & AZF_AC97_REG_UNSUPPORTED)
|
||||
unsupported = 1;
|
||||
else {
|
||||
if (reg_azf & AZF_AC97_REG_REAL_IO_WRITE)
|
||||
snd_azf3328_mixer_outw(
|
||||
chip,
|
||||
reg_azf & AZF_REG_MASK,
|
||||
val
|
||||
);
|
||||
else
|
||||
if (reg_azf & AZF_AC97_REG_EMU_IO_WRITE) {
|
||||
switch (reg_ac97) {
|
||||
case AC97_REC_GAIN_MIC:
|
||||
case AC97_POWERDOWN:
|
||||
case AC97_EXTENDED_STATUS:
|
||||
/*
|
||||
* Silently swallow these writes.
|
||||
* Since for most registers our card doesn't
|
||||
* actually support a comparable feature,
|
||||
* this is exactly what we should do here.
|
||||
* The AC97 layer's I/O caching probably
|
||||
* automatically takes care of all the rest...
|
||||
* (remembers written values etc.)
|
||||
*/
|
||||
break;
|
||||
default:
|
||||
unsupported = 1;
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
if (unsupported)
|
||||
snd_azf3328_mixer_ac97_map_unsupported(reg_ac97, "write");
|
||||
}
|
||||
|
||||
static int __devinit
|
||||
snd_azf3328_mixer_new(struct snd_azf3328 *chip)
|
||||
{
|
||||
struct snd_ac97_bus *bus;
|
||||
struct snd_ac97_template ac97;
|
||||
static struct snd_ac97_bus_ops ops = {
|
||||
.write = snd_azf3328_mixer_ac97_write,
|
||||
.read = snd_azf3328_mixer_ac97_read,
|
||||
};
|
||||
int rc;
|
||||
|
||||
memset(&ac97, 0, sizeof(ac97));
|
||||
ac97.scaps = AC97_SCAP_SKIP_MODEM
|
||||
| AC97_SCAP_AUDIO /* we support audio! */
|
||||
| AC97_SCAP_NO_SPDIF;
|
||||
ac97.private_data = chip;
|
||||
ac97.pci = chip->pci;
|
||||
|
||||
/*
|
||||
* ALSA's AC97 layer has terrible init crackling issues,
|
||||
* unfortunately, and since it makes use of AC97_RESET,
|
||||
* there's no use trying to mute Master Playback proactively.
|
||||
*/
|
||||
|
||||
rc = snd_ac97_bus(chip->card, 0, &ops, NULL, &bus);
|
||||
if (!rc)
|
||||
rc = snd_ac97_mixer(bus, &ac97, &chip->ac97);
|
||||
/*
|
||||
* Make sure to complain loudly in case of AC97 init failure,
|
||||
* since failure may happen quite often,
|
||||
* due to this card being a very quirky AC97 "lookalike".
|
||||
*/
|
||||
if (rc)
|
||||
printk(KERN_ERR "azt3328: AC97 init failed, err %d!\n", rc);
|
||||
|
||||
/* If we return an error here, then snd_card_free() should
|
||||
* free up any ac97 codecs that got created, as well as the bus.
|
||||
*/
|
||||
return rc;
|
||||
}
|
||||
#else /* AZF_USE_AC97_LAYER */
|
||||
static void
|
||||
snd_azf3328_mixer_write_volume_gradually(const struct snd_azf3328 *chip,
|
||||
unsigned reg,
|
||||
@ -945,6 +1282,7 @@ snd_azf3328_mixer_new(struct snd_azf3328 *chip)
|
||||
snd_azf3328_dbgcallleave();
|
||||
return 0;
|
||||
}
|
||||
#endif /* AZF_USE_AC97_LAYER */
|
||||
|
||||
static int
|
||||
snd_azf3328_hw_params(struct snd_pcm_substream *substream,
|
||||
@ -1239,8 +1577,8 @@ snd_azf3328_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
|
||||
if (is_main_mixer_playback_codec) {
|
||||
/* mute WaveOut (avoid clicking during setup) */
|
||||
previously_muted =
|
||||
snd_azf3328_mixer_set_mute(
|
||||
chip, IDX_MIXER_WAVEOUT, 1
|
||||
snd_azf3328_mixer_mute_control_pcm(
|
||||
chip, 1
|
||||
);
|
||||
}
|
||||
|
||||
@ -1296,8 +1634,8 @@ snd_azf3328_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
|
||||
if (is_main_mixer_playback_codec) {
|
||||
/* now unmute WaveOut */
|
||||
if (!previously_muted)
|
||||
snd_azf3328_mixer_set_mute(
|
||||
chip, IDX_MIXER_WAVEOUT, 0
|
||||
snd_azf3328_mixer_mute_control_pcm(
|
||||
chip, 0
|
||||
);
|
||||
}
|
||||
|
||||
@ -1321,8 +1659,8 @@ snd_azf3328_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
|
||||
if (is_main_mixer_playback_codec) {
|
||||
/* mute WaveOut (avoid clicking during setup) */
|
||||
previously_muted =
|
||||
snd_azf3328_mixer_set_mute(
|
||||
chip, IDX_MIXER_WAVEOUT, 1
|
||||
snd_azf3328_mixer_mute_control_pcm(
|
||||
chip, 1
|
||||
);
|
||||
}
|
||||
|
||||
@ -1347,8 +1685,8 @@ snd_azf3328_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
|
||||
if (is_main_mixer_playback_codec) {
|
||||
/* now unmute WaveOut */
|
||||
if (!previously_muted)
|
||||
snd_azf3328_mixer_set_mute(
|
||||
chip, IDX_MIXER_WAVEOUT, 0
|
||||
snd_azf3328_mixer_mute_control_pcm(
|
||||
chip, 0
|
||||
);
|
||||
}
|
||||
|
||||
@ -2056,11 +2394,7 @@ snd_azf3328_free(struct snd_azf3328 *chip)
|
||||
if (chip->irq < 0)
|
||||
goto __end_hw;
|
||||
|
||||
/* reset (close) mixer:
|
||||
* first mute master volume, then reset
|
||||
*/
|
||||
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_PLAY_MASTER, 1);
|
||||
snd_azf3328_mixer_outw(chip, IDX_MIXER_RESET, 0x0000);
|
||||
snd_azf3328_mixer_reset(chip);
|
||||
|
||||
snd_azf3328_timer_stop(chip->timer);
|
||||
snd_azf3328_gameport_free(chip);
|
||||
@ -2413,6 +2747,55 @@ snd_azf3328_suspend_regs(unsigned long io_addr, unsigned count, u32 *saved_regs)
|
||||
}
|
||||
}
|
||||
|
||||
static inline void
|
||||
snd_azf3328_resume_regs(const u32 *saved_regs,
|
||||
unsigned long io_addr,
|
||||
unsigned count
|
||||
)
|
||||
{
|
||||
unsigned reg;
|
||||
|
||||
for (reg = 0; reg < count; ++reg) {
|
||||
outl(*saved_regs, io_addr);
|
||||
snd_azf3328_dbgpm("resume: io 0x%04lx: 0x%08x --> 0x%08x\n",
|
||||
io_addr, *saved_regs, inl(io_addr));
|
||||
++saved_regs;
|
||||
io_addr += sizeof(*saved_regs);
|
||||
}
|
||||
}
|
||||
|
||||
static inline void
|
||||
snd_azf3328_suspend_ac97(struct snd_azf3328 *chip)
|
||||
{
|
||||
#ifdef AZF_USE_AC97_LAYER
|
||||
snd_ac97_suspend(chip->ac97);
|
||||
#else
|
||||
snd_azf3328_suspend_regs(chip->mixer_io,
|
||||
ARRAY_SIZE(chip->saved_regs_mixer), chip->saved_regs_mixer);
|
||||
|
||||
/* make sure to disable master volume etc. to prevent looping sound */
|
||||
snd_azf3328_mixer_mute_control_master(chip, 1);
|
||||
snd_azf3328_mixer_mute_control_pcm(chip, 1);
|
||||
#endif /* AZF_USE_AC97_LAYER */
|
||||
}
|
||||
|
||||
static inline void
|
||||
snd_azf3328_resume_ac97(const struct snd_azf3328 *chip)
|
||||
{
|
||||
#ifdef AZF_USE_AC97_LAYER
|
||||
snd_ac97_resume(chip->ac97);
|
||||
#else
|
||||
snd_azf3328_resume_regs(chip->saved_regs_mixer, chip->mixer_io,
|
||||
ARRAY_SIZE(chip->saved_regs_mixer));
|
||||
|
||||
/* unfortunately with 32bit transfers, IDX_MIXER_PLAY_MASTER (0x02)
|
||||
and IDX_MIXER_RESET (offset 0x00) get touched at the same time,
|
||||
resulting in a mixer reset condition persisting until _after_
|
||||
master vol was restored. Thus master vol needs an extra restore. */
|
||||
outw(((u16 *)chip->saved_regs_mixer)[1], chip->mixer_io + 2);
|
||||
#endif /* AZF_USE_AC97_LAYER */
|
||||
}
|
||||
|
||||
static int
|
||||
snd_azf3328_suspend(struct pci_dev *pci, pm_message_t state)
|
||||
{
|
||||
@ -2426,12 +2809,7 @@ snd_azf3328_suspend(struct pci_dev *pci, pm_message_t state)
|
||||
snd_pcm_suspend_all(chip->pcm[AZF_CODEC_PLAYBACK]);
|
||||
snd_pcm_suspend_all(chip->pcm[AZF_CODEC_I2S_OUT]);
|
||||
|
||||
snd_azf3328_suspend_regs(chip->mixer_io,
|
||||
ARRAY_SIZE(chip->saved_regs_mixer), chip->saved_regs_mixer);
|
||||
|
||||
/* make sure to disable master volume etc. to prevent looping sound */
|
||||
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_PLAY_MASTER, 1);
|
||||
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1);
|
||||
snd_azf3328_suspend_ac97(chip);
|
||||
|
||||
snd_azf3328_suspend_regs(chip->ctrl_io,
|
||||
ARRAY_SIZE(chip->saved_regs_ctrl), chip->saved_regs_ctrl);
|
||||
@ -2453,23 +2831,6 @@ snd_azf3328_suspend(struct pci_dev *pci, pm_message_t state)
|
||||
return 0;
|
||||
}
|
||||
|
||||
static inline void
|
||||
snd_azf3328_resume_regs(const u32 *saved_regs,
|
||||
unsigned long io_addr,
|
||||
unsigned count
|
||||
)
|
||||
{
|
||||
unsigned reg;
|
||||
|
||||
for (reg = 0; reg < count; ++reg) {
|
||||
outl(*saved_regs, io_addr);
|
||||
snd_azf3328_dbgpm("resume: io 0x%04lx: 0x%08x --> 0x%08x\n",
|
||||
io_addr, *saved_regs, inl(io_addr));
|
||||
++saved_regs;
|
||||
io_addr += sizeof(*saved_regs);
|
||||
}
|
||||
}
|
||||
|
||||
static int
|
||||
snd_azf3328_resume(struct pci_dev *pci)
|
||||
{
|
||||
@ -2493,14 +2854,7 @@ snd_azf3328_resume(struct pci_dev *pci)
|
||||
snd_azf3328_resume_regs(chip->saved_regs_opl3, chip->opl3_io,
|
||||
ARRAY_SIZE(chip->saved_regs_opl3));
|
||||
|
||||
snd_azf3328_resume_regs(chip->saved_regs_mixer, chip->mixer_io,
|
||||
ARRAY_SIZE(chip->saved_regs_mixer));
|
||||
|
||||
/* unfortunately with 32bit transfers, IDX_MIXER_PLAY_MASTER (0x02)
|
||||
and IDX_MIXER_RESET (offset 0x00) get touched at the same time,
|
||||
resulting in a mixer reset condition persisting until _after_
|
||||
master vol was restored. Thus master vol needs an extra restore. */
|
||||
outw(((u16 *)chip->saved_regs_mixer)[1], chip->mixer_io + 2);
|
||||
snd_azf3328_resume_ac97(chip);
|
||||
|
||||
snd_azf3328_resume_regs(chip->saved_regs_ctrl, chip->ctrl_io,
|
||||
ARRAY_SIZE(chip->saved_regs_ctrl));
|
||||
|
||||
Loading…
Reference in New Issue
Block a user