Linux 3.8-rc6

-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.13 (GNU/Linux) iQEcBAABAgAGBQJRCxWdAAoJEHm+PkMAQRiG3bAH/28D2NbRLIDo6QIzk3seCCh3 A6vqDWbX671JRa0RO38DrWhqv6L/EisvjNZMVxBNaN635+3+yC7wsKziXYxA4+AL Ef9JISiwXykRWwrC8Q34YBWfWgeFTmaau71IRv45x2OTwiijd6cvjXhLDrOhHEGL rdAGJxIdBOfuASw1zpn9PxzfAtg1j/FGP03B4yy+JFhYzuDp3pvnDIysAnXefLml UheuBELdNf8Jx7NtW80PTa+TQtruWPC8otoiJevV4TrAWmAOctJiM1izL+VOZqqD I/v5aGf9mCN+cxLq06imwgEHWmP1I7yDdjjTHrr4wwIMws1vg8PNsJqG3AsPcwM= =dR8S -----END PGP SIGNATURE----- Merge tag 'v3.8-rc6' into x86/urgent Linux 3.8-rc6 Merged in order to add a documentation update versus new code in upstream. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2024-12-03 00:16:39 +07:00 · 2013-01-31 20:22:57 -08:00 · 2013-01-31 20:22:57 -08:00 · b5831174f9
commit b5831174f9
parent 40a1ef95da 88b62b915b
470 changed files with 4037 additions and 2342 deletions
--- a/Documentation/device-mapper/dm-raid.txt
+++ b/Documentation/device-mapper/dm-raid.txt
@ -141,3 +141,4 @@ Version History
 1.2.0	Handle creation of arrays that contain failed devices.
 1.3.0	Added support for RAID 10
 1.3.1	Allow device replacement/rebuild for RAID 10
+1.3.2   Fix/improve redundancy checking for RAID10
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@ -81,7 +81,8 @@ PA31	TXD4
 Required properties for pin configuration node:
 - atmel,pins: 4 integers array, represents a group of pins mux and config
  setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
-  The PERIPH 0 means gpio.
+  The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
+  PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...

 Bits used for CONFIG:
 PULL_UP		(1 << 0): indicate this pin need a pull up.
@ -126,7 +127,7 @@ pinctrl@fffff400 {
 		pinctrl_dbgu: dbgu-0 {
 			atmel,pins =
 				<1 14 0x1 0x0	/* PB14 periph A */
-				 1 15 0x1 0x1>;	/* PB15 periph with pullup */
+				 1 15 0x1 0x1>;	/* PB15 periph A with pullup */
 		};
 	};
 };
--- a/Documentation/filesystems/f2fs.txt
+++ b/Documentation/filesystems/f2fs.txt
@ -175,9 +175,9 @@ consists of multiple segments as described below.
                                            align with the zone size <-|
                 |-> align with the segment size
     _________________________________________________________________________
-    |            |            |    Node     |   Segment   |   Segment  |      |
-    | Superblock | Checkpoint |   Address   |    Info.    |   Summary  | Main |
-    |    (SB)    |   (CP)     | Table (NAT) | Table (SIT) | Area (SSA) |      |
+    |            |            |   Segment   |    Node     |   Segment  |      |
+    | Superblock | Checkpoint |    Info.    |   Address   |   Summary  | Main |
+    |    (SB)    |   (CP)     | Table (SIT) | Table (NAT) | Area (SSA) |      |
    |____________|_____2______|______N______|______N______|______N_____|__N___|
                                                                       .      .
                                                             .                .
@ -200,14 +200,14 @@ consists of multiple segments as described below.
 : It contains file system information, bitmaps for valid NAT/SIT sets, orphan
   inode lists, and summary entries of current active segments.

- Node Address Table (NAT)
- : It is composed of a block address table for all the node blocks stored in
-   Main area.
-
 - Segment Information Table (SIT)
 : It contains segment information such as valid block count and bitmap for the
   validity of all the blocks.

+- Node Address Table (NAT)
+ : It is composed of a block address table for all the node blocks stored in
+   Main area.
+
 - Segment Summary Area (SSA)
 : It contains summary entries which contains the owner information of all the
   data and node blocks stored in Main area.
@ -236,13 +236,13 @@ For file system consistency, each CP points to which NAT and SIT copies are
 valid, as shown as below.

  +--------+----------+---------+
-  |   CP   |    NAT   |   SIT   |
+  |   CP   |    SIT   |   NAT   |
  +--------+----------+---------+
  .         .          .          .
  .            .              .              .
  .               .                 .                 .
  +-------+-------+--------+--------+--------+--------+
-  | CP #0 | CP #1 | NAT #0 | NAT #1 | SIT #0 | SIT #1 |
+  | CP #0 | CP #1 | SIT #0 | SIT #1 | NAT #0 | NAT #1 |
  +-------+-------+--------+--------+--------+--------+
     |             ^                          ^
     |             |                          |
--- a/Documentation/hid/hid-sensor.txt
+++ b/Documentation/hid/hid-sensor.txt
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@ -57,6 +57,10 @@ Protocol 2.10:	(Kernel 2.6.31) Added a protocol for relaxed alignment
 Protocol 2.11:	(Kernel 3.6) Added a field for offset of EFI handover
 		protocol entry point.

+Protocol 2.12:	(Kernel 3.9) Added the xloadflags field and extension fields
+	 	to struct boot_params for for loading bzImage and ramdisk
+		above 4G in 64bit.
+
 **** MEMORY LAYOUT

 The traditional memory map for the kernel loader, used for Image or
@ -182,7 +186,7 @@ Offset	Proto	Name		Meaning
 0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
 0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
 0235/1	2.10+	min_alignment	Minimum alignment, as a power of two
-0236/2	N/A	pad3		Unused
+0236/2	2.12+	xloadflags	Boot protocol option flags
 0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
 023C/4	2.07+	hardware_subarch Hardware subarchitecture
 0240/8	2.07+	hardware_subarch_data Subarchitecture-specific data
@ -582,6 +586,27 @@ Protocol:	2.10+
  misaligned kernel.  Therefore, a loader should typically try each
  power-of-two alignment from kernel_alignment down to this alignment.

+Field name:     xloadflags
+Type:           read
+Offset/size:    0x236/2
+Protocol:       2.12+
+
+  This field is a bitmask.
+
+  Bit 0 (read):	XLF_KERNEL_64
+	- If 1, this kernel has the legacy 64-bit entry point at 0x200.
+
+  Bit 1 (read): XLF_CAN_BE_LOADED_ABOVE_4G
+        - If 1, kernel/boot_params/cmdline/ramdisk can be above 4G.
+
+  Bit 2 (read):	XLF_EFI_HANDOVER_32
+	- If 1, the kernel supports the 32-bit EFI handoff entry point
+          given at handover_offset.
+
+  Bit 3 (read): XLF_EFI_HANDOVER_64
+	- If 1, the kernel supports the 64-bit EFI handoff entry point
+          given at handover_offset + 0x200.
+
 Field name:	cmdline_size
 Type:		read
 Offset/size:	0x238/4
--- a/Documentation/x86/zero-page.txt
+++ b/Documentation/x86/zero-page.txt
@ -19,6 +19,9 @@ Offset	Proto	Name		Meaning
 090/010	ALL	hd1_info	hd1 disk parameter, OBSOLETE!!
 0A0/010	ALL	sys_desc_table	System description table (struct sys_desc_table)
 0B0/010	ALL	olpc_ofw_header	OLPC's OpenFirmware CIF and friends
+0C0/004	ALL	ext_ramdisk_image ramdisk_image high 32bits
+0C4/004	ALL	ext_ramdisk_size  ramdisk_size high 32bits
+0C8/004	ALL	ext_cmd_line_ptr  cmd_line_ptr high 32bits
 140/080	ALL	edid_info	Video mode setup (struct edid_info)
 1C0/020	ALL	efi_info	EFI 32 information (struct efi_info)
 1E0/004	ALL	alk_mem_k	Alternative mem check, in KB
@ -27,6 +30,7 @@ Offset	Proto	Name		Meaning
 1E9/001	ALL	eddbuf_entries	Number of entries in eddbuf (below)
 1EA/001	ALL	edd_mbr_sig_buf_entries	Number of entries in edd_mbr_sig_buffer
 				(below)
+1EF/001	ALL	sentinel	Used to detect broken bootloaders
 290/040	ALL	edd_mbr_sig_buffer EDD MBR signatures
 2D0/A00	ALL	e820_map	E820 memory map table
 				(array of struct e820entry)
--- a/10
+++ b/10
@ -2966,7 +2966,7 @@ S:	Maintained
 F:	drivers/net/ethernet/i825xx/eexpress.*

 ETHERNET BRIDGE
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	bridge@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net:Bridge
@ -4905,7 +4905,7 @@ S:	Maintained

 MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
 M:	Mirko Lindner <mlindner@marvell.com>
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
@ -5180,7 +5180,7 @@ S:	Supported
 F:	drivers/infiniband/hw/nes/

 NETEM NETWORK EMULATOR
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c
@ -6585,7 +6585,7 @@ F:	drivers/media/platform/s3c-camif/
 F:	include/media/s3c_camif.h

 SERIAL DRIVERS
-M:	Alan Cox <alan@linux.intel.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial
@ -7088,7 +7088,7 @@ F:	include/uapi/sound/
 F:	sound/

 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
-M:	Liam Girdwood <lrg@ti.com>
+M:	Liam Girdwood <lgirdwood@gmail.com>
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
--- a/6
+++ b/6
@ -1,8 +1,8 @@
 VERSION = 3
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
-NAME = Terrified Chipmunk
+EXTRAVERSION = -rc6
+NAME = Unicycling Gorilla

 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@ -169,7 +169,7 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
 				  -e s/arm.*/arm/ -e s/sa110/arm/ \
 				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
 				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-				  -e s/sh[234].*/sh/ )
+				  -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )

 # Cross compiling and selecting different set of gcc/bin-utils
 # ---------------------------------------------------------------------------
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@ -26,7 +26,7 @@ chosen {

 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
+		reg = <0x00000000 0x40000000>; /* 1 GB */
 	};

 	soc {
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@ -50,27 +50,25 @@ pinctrl {
 		};

 		gpio0: gpio@d0018100 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018100 0x40>,
-			    <0xd0018800 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018100 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <16>, <17>, <18>, <19>;
+			interrupts = <82>, <83>, <84>, <85>;
 		};

 		gpio1: gpio@d0018140 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018140 0x40>,
-			    <0xd0018840 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018140 0x40>;
 			ngpios = <17>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <20>, <21>, <22>;
+			interrupts = <87>, <88>, <89>;
 		};
 	};
 };
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@ -51,39 +51,36 @@ pinctrl {
 		};

 		gpio0: gpio@d0018100 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018100 0x40>,
-			    <0xd0018800 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018100 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <16>, <17>, <18>, <19>;
+			interrupts = <82>, <83>, <84>, <85>;
 		};

 		gpio1: gpio@d0018140 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018140 0x40>,
-			    <0xd0018840 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018140 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <20>, <21>, <22>, <23>;
+			interrupts = <87>, <88>, <89>, <90>;
 		};

 		gpio2: gpio@d0018180 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018180 0x40>,
-			    <0xd0018870 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018180 0x40>;
 			ngpios = <3>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <24>;
+			interrupts = <91>;
 		};

 		ethernet@d0034000 {
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@ -66,39 +66,36 @@ pinctrl {
 		};

 		gpio0: gpio@d0018100 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018100 0x40>,
-			    <0xd0018800 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018100 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <16>, <17>, <18>, <19>;
+			interrupts = <82>, <83>, <84>, <85>;
 		};

 		gpio1: gpio@d0018140 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018140 0x40>,
-			    <0xd0018840 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018140 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <20>, <21>, <22>, <23>;
+			interrupts = <87>, <88>, <89>, <90>;
 		};

 		gpio2: gpio@d0018180 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018180 0x40>,
-			    <0xd0018870 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018180 0x40>;
 			ngpios = <3>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <24>;
+			interrupts = <91>;
 		};

 		ethernet@d0034000 {
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@ -336,8 +336,8 @@ usb0: ohci@00300000 {

 	i2c@0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 23 0 /* sda */
-			 &pioA 24 0 /* scl */
+		gpios = <&pioA 25 0 /* sda */
+			 &pioA 26 0 /* scl */
 			>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@ -143,6 +143,11 @@ pinctrl_usart0_cts: usart0_cts-0 {
 						atmel,pins =
 							<0 3 0x1 0x0>;	/* PA3 periph A */
 					};
+
+					pinctrl_usart0_sck: usart0_sck-0 {
+						atmel,pins =
+							<0 4 0x1 0x0>;	/* PA4 periph A */
+					};
 				};

 				usart1 {
@ -154,12 +159,17 @@ pinctrl_usart1: usart1-0 {

 					pinctrl_usart1_rts: usart1_rts-0 {
 						atmel,pins =
-							<3 27 0x3 0x0>;	/* PC27 periph C */
+							<2 27 0x3 0x0>;	/* PC27 periph C */
 					};

 					pinctrl_usart1_cts: usart1_cts-0 {
 						atmel,pins =
-							<3 28 0x3 0x0>;	/* PC28 periph C */
+							<2 28 0x3 0x0>;	/* PC28 periph C */
+					};
+
+					pinctrl_usart1_sck: usart1_sck-0 {
+						atmel,pins =
+							<2 28 0x3 0x0>;	/* PC29 periph C */
 					};
 				};

@ -172,46 +182,56 @@ pinctrl_usart2: usart2-0 {

 					pinctrl_uart2_rts: uart2_rts-0 {
 						atmel,pins =
-							<0 0 0x2 0x0>;	/* PB0 periph B */
+							<1 0 0x2 0x0>;	/* PB0 periph B */
 					};

 					pinctrl_uart2_cts: uart2_cts-0 {
 						atmel,pins =
-							<0 1 0x2 0x0>;	/* PB1 periph B */
+							<1 1 0x2 0x0>;	/* PB1 periph B */
+					};
+
+					pinctrl_usart2_sck: usart2_sck-0 {
+						atmel,pins =
+							<1 2 0x2 0x0>;	/* PB2 periph B */
 					};
 				};

 				usart3 {
 					pinctrl_uart3: usart3-0 {
 						atmel,pins =
-							<3 23 0x2 0x1	/* PC22 periph B with pullup */
-							 3 23 0x2 0x0>;	/* PC23 periph B */
+							<2 23 0x2 0x1	/* PC22 periph B with pullup */
+							 2 23 0x2 0x0>;	/* PC23 periph B */
 					};

 					pinctrl_usart3_rts: usart3_rts-0 {
 						atmel,pins =
-							<3 24 0x2 0x0>;	/* PC24 periph B */
+							<2 24 0x2 0x0>;	/* PC24 periph B */
 					};

 					pinctrl_usart3_cts: usart3_cts-0 {
 						atmel,pins =
-							<3 25 0x2 0x0>;	/* PC25 periph B */
+							<2 25 0x2 0x0>;	/* PC25 periph B */
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<2 26 0x2 0x0>;	/* PC26 periph B */
 					};
 				};

 				uart0 {
 					pinctrl_uart0: uart0-0 {
 						atmel,pins =
-							<3 8 0x3 0x0	/* PC8 periph C */
-							 3 9 0x3 0x1>;	/* PC9 periph C with pullup */
+							<2 8 0x3 0x0	/* PC8 periph C */
+							 2 9 0x3 0x1>;	/* PC9 periph C with pullup */
 					};
 				};

 				uart1 {
 					pinctrl_uart1: uart1-0 {
 						atmel,pins =
-							<3 16 0x3 0x0	/* PC16 periph C */
-							 3 17 0x3 0x1>;	/* PC17 periph C with pullup */
+							<2 16 0x3 0x0	/* PC16 periph C */
+							 2 17 0x3 0x1>;	/* PC17 periph C with pullup */
 					};
 				};

@ -240,14 +260,14 @@ pinctrl_macb0_rmii: macb0_rmii-0 {

 					pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
 						atmel,pins =
-							<1 8 0x1 0x0	/* PA8 periph A */
-							 1 11 0x1 0x0	/* PA11 periph A */
-							 1 12 0x1 0x0	/* PA12 periph A */
-							 1 13 0x1 0x0	/* PA13 periph A */
-							 1 14 0x1 0x0	/* PA14 periph A */
-							 1 15 0x1 0x0	/* PA15 periph A */
-							 1 16 0x1 0x0	/* PA16 periph A */
-							 1 17 0x1 0x0>;	/* PA17 periph A */
+							<1 8 0x1 0x0	/* PB8 periph A */
+							 1 11 0x1 0x0	/* PB11 periph A */
+							 1 12 0x1 0x0	/* PB12 periph A */
+							 1 13 0x1 0x0	/* PB13 periph A */
+							 1 14 0x1 0x0	/* PB14 periph A */
+							 1 15 0x1 0x0	/* PB15 periph A */
+							 1 16 0x1 0x0	/* PB16 periph A */
+							 1 17 0x1 0x0>;	/* PB17 periph A */
 					};
 				};

--- a/arch/arm/boot/dts/cros5250-common.dtsi
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@ -96,8 +96,8 @@ dwmmc0@12200000 {
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;

 		slot@0 {
 			reg = <0>;
@ -120,8 +120,8 @@ dwmmc2@12220000 {
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;

 		slot@0 {
 			reg = <0>;
@ -141,8 +141,8 @@ dwmmc3@12230000 {
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;

 		slot@0 {
 			reg = <0>;
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@ -26,10 +26,15 @@ power {
 };

 &uart0 { status = "okay"; };
-&sdio0 { status = "okay"; };
 &sata0 { status = "okay"; };
 &i2c0 { status = "okay"; };

+&sdio0 {
+	status = "okay";
+	/* sdio0 card detect is connected to wrong pin on CuBox */
+	cd-gpios = <&gpio0 12 1>;
+};
+
 &spi0 {
 	status = "okay";

@ -42,9 +47,14 @@ spi-flash@0 {
 };

 &pinctrl {
-	pinctrl-0 = <&pmx_gpio_18>;
+	pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>;
 	pinctrl-names = "default";

+	pmx_gpio_12: pmx-gpio-12 {
+		marvell,pins = "mpp12";
+		marvell,function = "gpio";
+	};
+
 	pmx_gpio_18: pmx-gpio-18 {
 		marvell,pins = "mpp18";
 		marvell,function = "gpio";
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@ -115,8 +115,8 @@ dwmmc0@12200000 {
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;

 		slot@0 {
 			reg = <0>;
@ -139,8 +139,8 @@ dwmmc2@12220000 {
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;

 		slot@0 {
 			reg = <0>;
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@ -1,4 +1,5 @@
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"

 / {
 	chosen {
@ -6,6 +7,21 @@ chosen {
 	};

 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+			pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0
+					&pmx_ns2_sata0 &pmx_ns2_sata1>;
+			pinctrl-names = "default";
+
+			pmx_ns2_sata0: pmx-ns2-sata0 {
+				marvell,pins = "mpp21";
+				marvell,function = "sata0";
+			};
+			pmx_ns2_sata1: pmx-ns2-sata1 {
+				marvell,pins = "mpp20";
+				marvell,function = "sata1";
+			};
+		};
+
 		serial@12000 {
 			clock-frequency = <166666667>;
 			status = "okay";
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@ -36,6 +36,7 @@ gpio0: gpio@10100 {
 			reg = <0x10100 0x40>;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <35>, <36>, <37>, <38>;
 		};

@ -46,6 +47,7 @@ gpio1: gpio@10140 {
 			reg = <0x10140 0x40>;
 			ngpios = <18>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <39>, <40>, <41>;
 		};

--- a/arch/arm/boot/dts/kizbox.dts
+++ b/arch/arm/boot/dts/kizbox.dts
@ -48,6 +48,8 @@ usart1: serial@fffb4000 {

 			macb0: ethernet@fffc4000 {
 				phy-mode = "mii";
+				pinctrl-0 = <&pinctrl_macb_rmii
+				             &pinctrl_macb_rmii_mii_alt>;
 				status = "okay";
 			};

--- a/arch/arm/boot/dts/sunxi.dtsi
+++ b/arch/arm/boot/dts/sunxi.dtsi
@ -60,19 +60,21 @@ intc: interrupt-controller@01c20400 {
 		};

 		uart0: uart@01c28000 {
-			compatible = "ns8250";
+			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
 			interrupts = <1>;
 			reg-shift = <2>;
+			reg-io-width = <4>;
 			clock-frequency = <24000000>;
 			status = "disabled";
 		};

 		uart1: uart@01c28400 {
-			compatible = "ns8250";
+			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
 			interrupts = <2>;
 			reg-shift = <2>;
+			reg-io-width = <4>;
 			clock-frequency = <24000000>;
 			status = "disabled";
 		};
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@ -45,7 +45,6 @@ cpu1: cpu@1 {
 			reg = <1>;
 		};

-/* A7s disabled till big.LITTLE patches are available...
 		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
@ -63,7 +62,6 @@ cpu4: cpu@4 {
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
 		};
-*/
 	};

 	memory@80000000 {
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@ -19,6 +19,7 @@ CONFIG_SOC_AT91SAM9260=y
 CONFIG_SOC_AT91SAM9263=y
 CONFIG_SOC_AT91SAM9G45=y
 CONFIG_SOC_AT91SAM9X5=y
+CONFIG_SOC_AT91SAM9N12=y
 CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_TIMER_HZ=128
@ -31,7 +32,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
 CONFIG_KEXEC=y
 CONFIG_AUTO_ZRELADDR=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@ -100,12 +100,14 @@ ENTRY(printch)
 		b	1b
 ENDPROC(printch)

+#ifdef CONFIG_MMU
 ENTRY(debug_ll_addr)
 		addruart r2, r3, ip
 		str	r2, [r0]
 		str	r3, [r1]
 		mov	pc, lr
 ENDPROC(debug_ll_addr)
+#endif

 #else

--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@ -246,6 +246,7 @@ __create_page_tables:

 	/*
 	 * Then map boot params address in r2 if specified.
+	 * We map 2 sections in case the ATAGs/DTB crosses a section boundary.
 	 */
 	mov	r0, r2, lsr #SECTION_SHIFT
 	movs	r0, r0, lsl #SECTION_SHIFT
@ -253,6 +254,8 @@ __create_page_tables:
 	addne	r3, r3, #PAGE_OFFSET
 	addne	r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
 	orrne	r6, r7, r0
+	strne	r6, [r3], #1 << PMD_ORDER
+	addne	r6, r6, #1 << SECTION_SHIFT
 	strne	r6, [r3]

 #ifdef CONFIG_DEBUG_LL
@ -331,7 +334,7 @@ ENTRY(secondary_startup)
 	 * as it has already been validated by the primary processor.
 	 */
 #ifdef CONFIG_ARM_VIRT_EXT
-	bl	__hyp_stub_install
+	bl	__hyp_stub_install_secondary
 #endif
 	safe_svcmode_maskall r9

--- a/arch/arm/kernel/hyp-stub.S
+++ b/arch/arm/kernel/hyp-stub.S
@ -99,7 +99,7 @@ ENTRY(__hyp_stub_install_secondary)
 	 * immediately.
 	 */
 	compare_cpu_mode_with_primary	r4, r5, r6, r7
-	bxne	lr
+	movne	pc, lr

 	/*
 	 * Once we have given up on one CPU, we do not try to install the
@ -111,7 +111,7 @@ ENTRY(__hyp_stub_install_secondary)
 	 */

 	cmp	r4, #HYP_MODE
-	bxne	lr			@ give up if the CPU is not in HYP mode
+	movne	pc, lr			@ give up if the CPU is not in HYP mode

 /*
 * Configure HSCTLR to set correct exception endianness/instruction set
@ -120,7 +120,8 @@ ENTRY(__hyp_stub_install_secondary)
 * Eventually, CPU-specific code might be needed -- assume not for now
 *
 * This code relies on the "eret" instruction to synchronize the
- * various coprocessor accesses.
+ * various coprocessor accesses. This is done when we switch to SVC
+ * (see safe_svcmode_maskall).
 */
 	@ Now install the hypervisor stub:
 	adr	r7, __hyp_stub_vectors
@ -155,14 +156,7 @@ THUMB(	orr	r7, #(1 << 30)	)	@ HSCTLR.TE
 1:
 #endif

-	bic	r7, r4, #MODE_MASK
-	orr	r7, r7, #SVC_MODE
-THUMB(	orr	r7, r7, #PSR_T_BIT	)
-	msr	spsr_cxsf, r7		@ This is SPSR_hyp.
-
-	__MSR_ELR_HYP(14)		@ msr elr_hyp, lr
-	__ERET				@ return, switching to SVC mode
-					@ The boot CPU mode is left in r4.
+	bx	lr			@ The boot CPU mode is left in r4.
 ENDPROC(__hyp_stub_install_secondary)

 __hyp_stub_do_trap:
@ -200,7 +194,7 @@ ENDPROC(__hyp_get_vectors)
 	@ fall through
 ENTRY(__hyp_set_vectors)
 	__HVC(0)
-	bx	lr
+	mov	pc, lr
 ENDPROC(__hyp_set_vectors)

 #ifndef ZIMAGE
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@ -105,6 +105,8 @@ static void __init soc_detect(u32 dbgu_base)
 	switch (socid) {
 	case ARCH_ID_AT91RM9200:
 		at91_soc_initdata.type = AT91_SOC_RM9200;
+		if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE)
+			at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
 		at91_boot_soc = at91rm9200_soc;
 		break;

--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@ -851,6 +851,7 @@ config SOC_IMX6Q
 	select HAVE_CAN_FLEXCAN if CAN
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
+	select HAVE_IMX_SRC
 	select HAVE_SMP
 	select MFD_SYSCON
 	select PINCTRL
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@ -254,9 +254,9 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
 	clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
-	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
+	clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
 	clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
 	/* i.mx25 has the i.mx35 type cspi */
 	clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@ -236,9 +236,9 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
 	clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
 	clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0");
-	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27");
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
 	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
 	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@ -139,9 +139,9 @@ int __init mx31_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
 	clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
-	clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc");
-	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
 	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
 	/* i.mx31 has the i.mx21 type uart */
 	clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@ -251,9 +251,9 @@ int __init mx35_clocks_init()
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
 	clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
-	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
+	clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27");
 	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
 	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@ -269,9 +269,9 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2");
 	clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2");
 	clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2");
-	clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usboh3_per_gate], "per", "imx-udc-mx51");
+	clk_register_clkdev(clk[usboh3_gate], "ipg", "imx-udc-mx51");
+	clk_register_clkdev(clk[usboh3_gate], "ahb", "imx-udc-mx51");
 	clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand");
 	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
 	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@ -436,6 +436,9 @@ int __init mx6q_clocks_init(void)
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clk[clks_init_on[i]]);

+	/* Set initial power mode */
+	imx6q_set_lpm(WAIT_CLOCKED);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@ -142,6 +142,7 @@ extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
 extern void imx6q_clock_map_io(void);

 extern void imx_cpu_die(unsigned int cpu);
+extern int imx_cpu_kill(unsigned int cpu);

 #ifdef CONFIG_PM
 extern void imx6q_pm_init(void);
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan(

 #include <linux/fsl_devices.h>
 struct imx_fsl_usb2_udc_data {
+	const char *devid;
 	resource_size_t iobase;
 	resource_size_t irq;
 };
--- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
+++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
@ -11,35 +11,36 @@
 #include "../hardware.h"
 #include "devices-common.h"

-#define imx_fsl_usb2_udc_data_entry_single(soc)				\
+#define imx_fsl_usb2_udc_data_entry_single(soc, _devid)			\
 	{								\
+		.devid = _devid,					\
 		.iobase = soc ## _USB_OTG_BASE_ADDR,			\
 		.irq = soc ## _INT_USB_OTG,				\
 	}

 #ifdef CONFIG_SOC_IMX25
 const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX25);
+	imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX25 */

 #ifdef CONFIG_SOC_IMX27
 const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX27);
+	imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX27 */

 #ifdef CONFIG_SOC_IMX31
 const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX31);
+	imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX31 */

 #ifdef CONFIG_SOC_IMX35
 const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX35);
+	imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX35 */

 #ifdef CONFIG_SOC_IMX51
 const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX51);
+	imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
 #endif

 struct platform_device *__init imx_add_fsl_usb2_udc(
@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc(
 			.flags = IORESOURCE_IRQ,
 		},
 	};
-	return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
+	return imx_add_platform_device_dmamask(data->devid, -1,
 			res, ARRAY_SIZE(res),
 			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }
--- a/arch/arm/mach-imx/devices/platform-imx-fb.c
+++ b/arch/arm/mach-imx/devices/platform-imx-fb.c
@ -54,7 +54,7 @@ struct platform_device *__init imx_add_imx_fb(
 			.flags = IORESOURCE_IRQ,
 		},
 	};
-	return imx_add_platform_device_dmamask("imx-fb", 0,
+	return imx_add_platform_device_dmamask(data->devid, 0,
 			res, ARRAY_SIZE(res),
 			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@ -46,9 +46,11 @@ static inline void cpu_enter_lowpower(void)
 void imx_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
-	imx_enable_cpu(cpu, false);
-
-	/* spin here until hardware takes it down */
-	while (1)
-		;
+	cpu_do_idle();
+}
+
+int imx_cpu_kill(unsigned int cpu)
+{
+	imx_enable_cpu(cpu, false);
+	return 1;
 }
--- a/arch/arm/mach-imx/iram_alloc.c
+++ b/arch/arm/mach-imx/iram_alloc.c
@ -22,8 +22,7 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/genalloc.h>
-
-#include "iram.h"
+#include "linux/platform_data/imx-iram.h"

 static unsigned long iram_phys_base;
 static void __iomem *iram_virt_base;
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@ -92,5 +92,6 @@ struct smp_operations  imx_smp_ops __initdata = {
 	.smp_boot_secondary	= imx_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= imx_cpu_die,
+	.cpu_kill		= imx_cpu_kill,
 #endif
 };
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@ -41,6 +41,7 @@ static int imx6q_pm_enter(suspend_state_t state)
 		cpu_suspend(0, imx6q_suspend_finish);
 		imx_smp_prepare();
 		imx_gpc_post_resume();
+		imx6q_set_lpm(WAIT_CLOCKED);
 		break;
 	default:
 		return -EINVAL;
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@ -475,13 +475,12 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
 {
 	int ret = 0;

+	if (!ap_syscon_base)
+		return -EINVAL;
+
 	if (nr == 0) {
 		sys->mem_offset = PHYS_PCI_MEM_BASE;
 		ret = pci_v3_setup_resources(sys);
-		/* Remap the Integrator system controller */
-		ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
-		if (!ap_syscon_base)
-			return -EINVAL;
 	}

 	return ret;
@ -497,6 +496,13 @@ void __init pci_v3_preinit(void)
 	unsigned int temp;
 	int ret;

+	/* Remap the Integrator system controller */
+	ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
+	if (!ap_syscon_base) {
+		pr_err("unable to remap the AP syscon for PCIv3\n");
+		return;
+	}
+
 	pcibios_min_mem = 0x00100000;

 	/*
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@ -18,47 +18,11 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include "common.h"
-#include "mpp.h"

 static struct mv643xx_eth_platform_data ns2_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };

-static unsigned int ns2_mpp_config[] __initdata = {
-	MPP0_SPI_SCn,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP6_SYSRST_OUTn,
-	MPP7_GPO,		/* Fan speed (bit 1) */
-	MPP8_TW0_SDA,
-	MPP9_TW0_SCK,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP12_GPO,		/* Red led */
-	MPP14_GPIO,		/* USB fuse */
-	MPP16_GPIO,		/* SATA 0 power */
-	MPP17_GPIO,		/* SATA 1 power */
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
-	MPP20_SATA1_ACTn,
-	MPP21_SATA0_ACTn,
-	MPP22_GPIO,		/* Fan speed (bit 0) */
-	MPP23_GPIO,		/* Fan power */
-	MPP24_GPIO,		/* USB mode select */
-	MPP25_GPIO,		/* Fan rotation fail */
-	MPP26_GPIO,		/* USB device vbus */
-	MPP28_GPIO,		/* USB enable host vbus */
-	MPP29_GPIO,		/* Blue led (slow register) */
-	MPP30_GPIO,		/* Blue led (command register) */
-	MPP31_GPIO,		/* Board power off */
-	MPP32_GPIO,		/* Power button (0 = Released, 1 = Pushed) */
-	MPP33_GPO,		/* Fan speed (bit 2) */
-	0
-};
-
 #define NS2_GPIO_POWER_OFF	31

 static void ns2_power_off(void)
@ -71,8 +35,6 @@ void __init ns2_init(void)
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_mpp_conf(ns2_mpp_config);
-
 	if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
 	    of_machine_is_compatible("lacie,netspace_mini_v2"))
 		ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@ -1,6 +1,8 @@
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 	-I$(srctree)/arch/arm/plat-orion/include

+AFLAGS_coherency_ll.o		:= -Wa,-march=armv7-a
+
 obj-y += system-controller.o
 obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o
 obj-$(CONFIG_SMP)                += platsmp.o headsmp.o
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = {
 		  OMAP_PULL_ENA),
 	OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),

+	/* UART2 - BT/FM/GPS shared transport */
+	OMAP4_MUX(UART2_CTS,	OMAP_PIN_INPUT	| OMAP_MUX_MODE0),
+	OMAP4_MUX(UART2_RTS,	OMAP_PIN_OUTPUT	| OMAP_MUX_MODE0),
+	OMAP4_MUX(UART2_RX,	OMAP_PIN_INPUT	| OMAP_MUX_MODE0),
+	OMAP4_MUX(UART2_TX,	OMAP_PIN_OUTPUT	| OMAP_MUX_MODE0),
+
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };

--- a/arch/arm/mach-omap2/cclock2420_data.c
+++ b/arch/arm/mach-omap2/cclock2420_data.c
@ -1935,6 +1935,8 @@ int __init omap2420_clk_init(void)
 			omap2_init_clk_hw_omap_clocks(c->lk.clk);
 	}

+	omap2xxx_clkt_vps_late_init();
+
 	omap2_clk_disable_autoidle_all();

 	omap2_clk_enable_init_clocks(enable_init_clks,
--- a/arch/arm/mach-omap2/cclock2430_data.c
+++ b/arch/arm/mach-omap2/cclock2430_data.c
@ -2050,6 +2050,8 @@ int __init omap2430_clk_init(void)
 			omap2_init_clk_hw_omap_clocks(c->lk.clk);
 	}

+	omap2xxx_clkt_vps_late_init();
+
 	omap2_clk_disable_autoidle_all();

 	omap2_clk_enable_init_clocks(enable_init_clks,
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@ -2026,14 +2026,13 @@ int __init omap4xxx_clk_init(void)
 	 * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
 	 * state when turning the ABE clock domain. Workaround this by
 	 * locking the ABE DPLL on boot.
+	 * Lock the ABE DPLL in any case to avoid issues with audio.
 	 */
-	if (cpu_is_omap446x()) {
-		rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
-		if (!rc)
-			rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
-		if (rc)
-			pr_err("%s: failed to configure ABE DPLL!\n", __func__);
-	}
+	rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
+	if (!rc)
+		rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure ABE DPLL!\n", __func__);

 	return 0;
 }
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@ -639,7 +639,7 @@ static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev)
 	return cnt;
 }

-static void omap_init_ocp2scp(void)
+static void __init omap_init_ocp2scp(void)
 {
 	struct omap_hwmod	*oh;
 	struct platform_device	*pdev;
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@ -25,6 +25,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_data/omap_drm.h>

+#include "soc.h"
 #include "omap_device.h"
 #include "omap_hwmod.h"

@ -56,7 +57,7 @@ static int __init omap_init_drm(void)
 			oh->name);
 	}

-	platform_data.omaprev = GET_OMAP_REVISION();
+	platform_data.omaprev = GET_OMAP_TYPE;

 	return platform_device_register(&omap_drm_device);

--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@ -2132,8 +2132,12 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
 	 * currently reset very early during boot, before I2C is
 	 * available, so it doesn't seem that we have any choice in
 	 * the kernel other than to avoid resetting it.
+	 *
+	 * Also, McPDM needs to be configured to NO_IDLE mode when it
+	 * is in used otherwise vital clocks will be gated which
+	 * results 'slow motion' audio playback.
 	 */
-	.flags		= HWMOD_EXT_OPT_MAIN_CLK,
+	.flags		= HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
 	.mpu_irqs	= omap44xx_mcpdm_irqs,
 	.sdma_reqs	= omap44xx_mcpdm_sdma_reqs,
 	.main_clk	= "mcpdm_fck",
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@ -165,15 +165,11 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
 	struct device_node *np;

 	for_each_matching_node(np, match) {
-		if (!of_device_is_available(np)) {
-			of_node_put(np);
+		if (!of_device_is_available(np))
 			continue;
-		}

-		if (property && !of_get_property(np, property, NULL)) {
-			of_node_put(np);
+		if (property && !of_get_property(np, property, NULL))
 			continue;
-		}

 		of_add_property(np, &device_disabled);
 		return np;
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@ -47,7 +47,7 @@ static struct spi_board_info wm1253_devs[] = {
 		.bus_num	= 0,
 		.chip_select	= 0,
 		.mode		= SPI_MODE_0,
-		.irq		= S3C_EINT(5),
+		.irq		= S3C_EINT(4),
 		.controller_data = &wm0010_spi_csinfo,
 		.platform_data = &wm0010_pdata,
 	},
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@ -338,8 +338,10 @@ int __init s3c64xx_pm_init(void)
 	for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++)
 		pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false);

+#ifdef CONFIG_S3C_DEV_FB
 	if (dev_get_platdata(&s3c_device_fb.dev))
 		pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev);
+#endif

 	return 0;
 }
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@ -774,25 +774,27 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
 	size_t size, enum dma_data_direction dir,
 	void (*op)(const void *, size_t, int))
 {
+	unsigned long pfn;
+	size_t left = size;
+
+	pfn = page_to_pfn(page) + offset / PAGE_SIZE;
+	offset %= PAGE_SIZE;
+
 	/*
 	 * A single sg entry may refer to multiple physically contiguous
 	 * pages.  But we still need to process highmem pages individually.
 	 * If highmem is not configured then the bulk of this loop gets
 	 * optimized out.
 	 */
-	size_t left = size;
 	do {
 		size_t len = left;
 		void *vaddr;

+		page = pfn_to_page(pfn);
+
 		if (PageHighMem(page)) {
-			if (len + offset > PAGE_SIZE) {
-				if (offset >= PAGE_SIZE) {
-					page += offset / PAGE_SIZE;
-					offset %= PAGE_SIZE;
-				}
+			if (len + offset > PAGE_SIZE)
 				len = PAGE_SIZE - offset;
-			}
 			vaddr = kmap_high_get(page);
 			if (vaddr) {
 				vaddr += offset;
@ -809,7 +811,7 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
 			op(vaddr, len, dir);
 		}
 		offset = 0;
-		page++;
+		pfn++;
 		left -= len;
 	} while (left);
 }
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@ -283,7 +283,7 @@ static struct mem_type mem_types[] = {
 	},
 	[MT_MEMORY_SO] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_MT_UNCACHED,
+				L_PTE_MT_UNCACHED | L_PTE_XN,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S |
 				PMD_SECT_UNCACHED | PMD_SECT_XN,
--- a/arch/arm/plat-versatile/headsmp.S
+++ b/arch/arm/plat-versatile/headsmp.S
@ -20,7 +20,7 @@
 */
 ENTRY(versatile_secondary_startup)
 	mrc	p15, 0, r0, c0, c0, 5
-	and	r0, r0, #15
+	bic	r0, #0xff000000
 	adr	r4, 1f
 	ldmia	r4, {r5, r6}
 	sub	r4, r4, r5
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@ -22,7 +22,7 @@
@  IRQs disabled.
@
 ENTRY(do_vfp)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	add	r11, r4, #1		@ increment it
 	str	r11, [r10, #TI_PREEMPT]
@ -35,7 +35,7 @@ ENTRY(do_vfp)
 ENDPROC(do_vfp)

 ENTRY(vfp_null_entry)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it
@ -53,7 +53,7 @@ ENDPROC(vfp_null_entry)

 	__INIT
 ENTRY(vfp_testing_entry)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@ -168,7 +168,7 @@ vfp_hw_state_valid:
 					@ else it's one 32-bit instruction, so
 					@ always subtract 4 from the following
 					@ instruction address.
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it
@ -192,7 +192,7 @@ look_for_VFP_exceptions:
 	@ not recognised by VFP

 	DBGSTR	"not VFP"
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it
--- a/arch/arm64/include/asm/elf.h
+++ b/arch/arm64/include/asm/elf.h
@ -26,7 +26,10 @@

 typedef unsigned long elf_greg_t;

-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+#define ELF_NGREG (sizeof(struct user_pt_regs) / sizeof(elf_greg_t))
+#define ELF_CORE_COPY_REGS(dest, regs)	\
+	*(struct user_pt_regs *)&(dest) = (regs)->user_regs;
+
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];
 typedef struct user_fpsimd_state elf_fpregset_t;

--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@ -672,33 +672,6 @@ ptrace_attach_sync_user_rbs (struct task_struct *child)
 	read_unlock(&tasklist_lock);
 }

-static inline int
-thread_matches (struct task_struct *thread, unsigned long addr)
-{
-	unsigned long thread_rbs_end;
-	struct pt_regs *thread_regs;
-
-	if (ptrace_check_attach(thread, 0) < 0)
-		/*
-		 * If the thread is not in an attachable state, we'll
-		 * ignore it.  The net effect is that if ADDR happens
-		 * to overlap with the portion of the thread's
-		 * register backing store that is currently residing
-		 * on the thread's kernel stack, then ptrace() may end
-		 * up accessing a stale value.  But if the thread
-		 * isn't stopped, that's a problem anyhow, so we're
-		 * doing as well as we can...
-		 */
-		return 0;
-
-	thread_regs = task_pt_regs(thread);
-	thread_rbs_end = ia64_get_user_rbs_end(thread, thread_regs, NULL);
-	if (!on_kernel_rbs(addr, thread_regs->ar_bspstore, thread_rbs_end))
-		return 0;
-
-	return 1;	/* looks like we've got a winner */
-}
-
 /*
 * Write f32-f127 back to task->thread.fph if it has been modified.
 */
--- a/arch/m68k/include/asm/dma-mapping.h
+++ b/arch/m68k/include/asm/dma-mapping.h
@ -21,6 +21,22 @@ extern void *dma_alloc_coherent(struct device *, size_t,
 extern void dma_free_coherent(struct device *, size_t,
 			      void *, dma_addr_t);

+static inline void *dma_alloc_attrs(struct device *dev, size_t size,
+				    dma_addr_t *dma_handle, gfp_t flag,
+				    struct dma_attrs *attrs)
+{
+	/* attrs is not supported and ignored */
+	return dma_alloc_coherent(dev, size, dma_handle, flag);
+}
+
+static inline void dma_free_attrs(struct device *dev, size_t size,
+				  void *cpu_addr, dma_addr_t dma_handle,
+				  struct dma_attrs *attrs)
+{
+	/* attrs is not supported and ignored */
+	dma_free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
 static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
 					  dma_addr_t *handle, gfp_t flag)
 {
--- a/arch/m68k/include/asm/pgtable_no.h
+++ b/arch/m68k/include/asm/pgtable_no.h
@ -64,6 +64,8 @@ extern unsigned int kobjsize(const void *objp);
 */
 #define	VMALLOC_START	0
 #define	VMALLOC_END	0xffffffff
+#define	KMAP_START	0
+#define	KMAP_END	0xffffffff

 #include <asm-generic/pgtable.h>

--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@ -4,7 +4,7 @@
 #include <uapi/asm/unistd.h>


-#define NR_syscalls		348
+#define NR_syscalls		349

 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_OLD_STAT
--- a/arch/m68k/include/uapi/asm/unistd.h
+++ b/arch/m68k/include/uapi/asm/unistd.h
@ -353,5 +353,6 @@
 #define __NR_process_vm_readv	345
 #define __NR_process_vm_writev	346
 #define __NR_kcmp		347
+#define __NR_finit_module	348

 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */
--- a/arch/m68k/kernel/syscalltable.S
+++ b/arch/m68k/kernel/syscalltable.S
@ -368,4 +368,5 @@ ENTRY(sys_call_table)
 	.long sys_process_vm_readv	/* 345 */
 	.long sys_process_vm_writev
 	.long sys_kcmp
+	.long sys_finit_module

--- a/arch/m68k/mm/init.c
+++ b/arch/m68k/mm/init.c
@ -39,6 +39,11 @@
 void *empty_zero_page;
 EXPORT_SYMBOL(empty_zero_page);

+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
+extern void init_pointer_table(unsigned long ptable);
+extern pmd_t *zero_pgtable;
+#endif
+
 #ifdef CONFIG_MMU

 pg_data_t pg_data_map[MAX_NUMNODES];
@ -69,9 +74,6 @@ void __init m68k_setup_node(int node)
 	node_set_online(node);
 }

-extern void init_pointer_table(unsigned long ptable);
-extern pmd_t *zero_pgtable;
-
 #else /* CONFIG_MMU */

 /*
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@ -8,8 +8,10 @@ config BCM47XX_SSB
 	select SSB_DRIVER_EXTIF
 	select SSB_EMBEDDED
 	select SSB_B43_PCI_BRIDGE if PCI
+	select SSB_DRIVER_PCICORE if PCI
 	select SSB_PCICORE_HOSTMODE if PCI
 	select SSB_DRIVER_GPIO
+	select GPIOLIB
 	default y
 	help
 	 Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
@ -25,6 +27,7 @@ config BCM47XX_BCMA
 	select BCMA_HOST_PCI if PCI
 	select BCMA_DRIVER_PCI_HOSTMODE if PCI
 	select BCMA_DRIVER_GPIO
+	select GPIOLIB
 	default y
 	help
 	 Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
--- a/arch/mips/cavium-octeon/executive/cvmx-l2c.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-l2c.c
@ -30,6 +30,7 @@
 * measurement, and debugging facilities.
 */

+#include <linux/compiler.h>
 #include <linux/irqflags.h>
 #include <asm/octeon/cvmx.h>
 #include <asm/octeon/cvmx-l2c.h>
@ -285,22 +286,22 @@ uint64_t cvmx_l2c_read_perf(uint32_t counter)
 */
 static void fault_in(uint64_t addr, int len)
 {
-	volatile char *ptr;
-	volatile char dummy;
+	char *ptr;
+
 	/*
 	 * Adjust addr and length so we get all cache lines even for
 	 * small ranges spanning two cache lines.
 	 */
 	len += addr & CVMX_CACHE_LINE_MASK;
 	addr &= ~CVMX_CACHE_LINE_MASK;
-	ptr = (volatile char *)cvmx_phys_to_ptr(addr);
+	ptr = cvmx_phys_to_ptr(addr);
 	/*
 	 * Invalidate L1 cache to make sure all loads result in data
 	 * being in L2.
 	 */
 	CVMX_DCACHE_INVALIDATE;
 	while (len > 0) {
-		dummy += *ptr;
+		ACCESS_ONCE(*ptr);
 		len -= CVMX_CACHE_LINE_SIZE;
 		ptr += CVMX_CACHE_LINE_SIZE;
 	}
--- a/arch/mips/include/asm/dsp.h
+++ b/arch/mips/include/asm/dsp.h
@ -16,7 +16,7 @@
 #include <asm/mipsregs.h>

 #define DSP_DEFAULT	0x00000000
-#define DSP_MASK	0x3ff
+#define DSP_MASK	0x3f

 #define __enable_dsp_hazard()						\
 do {									\
--- a/arch/mips/include/asm/inst.h
+++ b/arch/mips/include/asm/inst.h
@ -353,6 +353,7 @@ union mips_instruction {
 	struct u_format u_format;
 	struct c_format c_format;
 	struct r_format r_format;
+	struct p_format p_format;
 	struct f_format f_format;
 	struct ma_format ma_format;
 	struct b_format b_format;
--- a/arch/mips/include/asm/mach-pnx833x/war.h
+++ b/arch/mips/include/asm/mach-pnx833x/war.h
@ -21,4 +21,4 @@
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

-#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */
+#endif /* __ASM_MIPS_MACH_PNX833X_WAR_H */
--- a/arch/mips/include/asm/pgtable-64.h
+++ b/arch/mips/include/asm/pgtable-64.h
@ -230,6 +230,7 @@ static inline void pud_clear(pud_t *pudp)
 #else
 #define pte_pfn(x)		((unsigned long)((x).pte >> _PFN_SHIFT))
 #define pfn_pte(pfn, prot)	__pte(((pfn) << _PFN_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)	__pmd(((pfn) << _PFN_SHIFT) | pgprot_val(prot))
 #endif

 #define __pgd_offset(address)	pgd_index(address)
--- a/arch/mips/include/uapi/asm/Kbuild
+++ b/arch/mips/include/uapi/asm/Kbuild
@ -3,6 +3,7 @@ include include/uapi/asm-generic/Kbuild.asm

 header-y += auxvec.h
 header-y += bitsperlong.h
+header-y += break.h
 header-y += byteorder.h
 header-y += cachectl.h
 header-y += errno.h
--- a/arch/mips/include/uapi/asm/break.h
+++ b/arch/mips/include/uapi/asm/break.h
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@ -25,6 +25,12 @@
 #define MCOUNT_OFFSET_INSNS 4
 #endif

+/* Arch override because MIPS doesn't need to run this from stop_machine() */
+void arch_ftrace_update_code(int command)
+{
+	ftrace_modify_all_code(command);
+}
+
 /*
 * Check if the address is in kernel space
 *
@ -89,6 +95,24 @@ static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
 	return 0;
 }

+#ifndef CONFIG_64BIT
+static int ftrace_modify_code_2(unsigned long ip, unsigned int new_code1,
+				unsigned int new_code2)
+{
+	int faulted;
+
+	safe_store_code(new_code1, ip, faulted);
+	if (unlikely(faulted))
+		return -EFAULT;
+	ip += 4;
+	safe_store_code(new_code2, ip, faulted);
+	if (unlikely(faulted))
+		return -EFAULT;
+	flush_icache_range(ip, ip + 8); /* original ip + 12 */
+	return 0;
+}
+#endif
+
 /*
 * The details about the calling site of mcount on MIPS
 *
@ -131,8 +155,18 @@ int ftrace_make_nop(struct module *mod,
 	 * needed.
 	 */
 	new = in_kernel_space(ip) ? INSN_NOP : INSN_B_1F;
-
+#ifdef CONFIG_64BIT
 	return ftrace_modify_code(ip, new);
+#else
+	/*
+	 * On 32 bit MIPS platforms, gcc adds a stack adjust
+	 * instruction in the delay slot after the branch to
+	 * mcount and expects mcount to restore the sp on return.
+	 * This is based on a legacy API and does nothing but
+	 * waste instructions so it's being removed at runtime.
+	 */
+	return ftrace_modify_code_2(ip, new, INSN_NOP);
+#endif
 }

 int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
--- a/arch/mips/kernel/mcount.S
+++ b/arch/mips/kernel/mcount.S
@ -46,9 +46,8 @@
 	PTR_L	a5, PT_R9(sp)
 	PTR_L	a6, PT_R10(sp)
 	PTR_L	a7, PT_R11(sp)
-	PTR_ADDIU	sp, PT_SIZE
 #else
-	PTR_ADDIU	sp, (PT_SIZE + 8)
+	PTR_ADDIU	sp, PT_SIZE
 #endif
 .endm

@ -69,7 +68,9 @@ NESTED(ftrace_caller, PT_SIZE, ra)
 	.globl _mcount
 _mcount:
 	b	ftrace_stub
-	 nop
+	addiu sp,sp,8
+
+	/* When tracing is activated, it calls ftrace_caller+8 (aka here) */
 	lw	t1, function_trace_stop
 	bnez	t1, ftrace_stub
 	 nop
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@ -705,7 +705,7 @@ static int vpe_run(struct vpe * v)

 			printk(KERN_WARNING
 			       "VPE loader: TC %d is already in use.\n",
-                               t->index);
+			       v->tc->index);
 			return -ENOEXEC;
 		}
 	} else {
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@ -408,7 +408,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 #endif

 	/* tell oprofile which irq to use */
-	cp0_perfcount_irq = LTQ_PERF_IRQ;
+	cp0_perfcount_irq = irq_create_mapping(ltq_domain, LTQ_PERF_IRQ);

 	/*
 	 * if the timer irq is not one of the mips irqs we need to
--- a/arch/mips/lib/delay.c
+++ b/arch/mips/lib/delay.c
@ -21,7 +21,7 @@ void __delay(unsigned long loops)
 	"	.set	noreorder				\n"
 	"	.align	3					\n"
 	"1:	bnez	%0, 1b					\n"
-#if __SIZEOF_LONG__ == 4
+#if BITS_PER_LONG == 32
 	"	subu	%0, 1					\n"
 #else
 	"	dsubu	%0, 1					\n"
--- a/arch/mips/mm/ioremap.c
+++ b/arch/mips/mm/ioremap.c
@ -190,9 +190,3 @@ void __iounmap(const volatile void __iomem *addr)

 EXPORT_SYMBOL(__ioremap);
 EXPORT_SYMBOL(__iounmap);
-
-int __virt_addr_valid(const volatile void *kaddr)
-{
-	return pfn_valid(PFN_DOWN(virt_to_phys(kaddr)));
-}
-EXPORT_SYMBOL_GPL(__virt_addr_valid);
--- a/arch/mips/mm/mmap.c
+++ b/arch/mips/mm/mmap.c
@ -192,3 +192,9 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)

 	return ret;
 }
+
+int __virt_addr_valid(const volatile void *kaddr)
+{
+	return pfn_valid(PFN_DOWN(virt_to_phys(kaddr)));
+}
+EXPORT_SYMBOL_GPL(__virt_addr_valid);
--- a/arch/mips/netlogic/xlr/setup.c
+++ b/arch/mips/netlogic/xlr/setup.c
@ -193,8 +193,11 @@ static void nlm_init_node(void)

 void __init prom_init(void)
 {
-	int i, *argv, *envp;		/* passed as 32 bit ptrs */
+	int *argv, *envp;		/* passed as 32 bit ptrs */
 	struct psb_info *prom_infop;
+#ifdef CONFIG_SMP
+	int i;
+#endif

 	/* truncate to 32 bit and sign extend all args */
 	argv = (int *)(long)(int)fw_arg1;
--- a/arch/mips/pci/pci-ar71xx.c
+++ b/arch/mips/pci/pci-ar71xx.c
@ -24,7 +24,7 @@
 #include <asm/mach-ath79/pci.h>

 #define AR71XX_PCI_MEM_BASE	0x10000000
-#define AR71XX_PCI_MEM_SIZE	0x08000000
+#define AR71XX_PCI_MEM_SIZE	0x07000000

 #define AR71XX_PCI_WIN0_OFFS		0x10000000
 #define AR71XX_PCI_WIN1_OFFS		0x11000000
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@ -21,7 +21,7 @@
 #define AR724X_PCI_CTRL_SIZE	0x100

 #define AR724X_PCI_MEM_BASE	0x10000000
-#define AR724X_PCI_MEM_SIZE	0x08000000
+#define AR724X_PCI_MEM_SIZE	0x04000000

 #define AR724X_PCI_REG_RESET		0x18
 #define AR724X_PCI_REG_INT_STATUS	0x4c
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@ -1865,7 +1865,7 @@ syscall_restore:

 	/* Are we being ptraced? */
 	ldw	TASK_FLAGS(%r1),%r19
-	ldi	(_TIF_SINGLESTEP|_TIF_BLOCKSTEP),%r2
+	ldi	_TIF_SYSCALL_TRACE_MASK,%r2
 	and,COND(=)	%r19,%r2,%r0
 	b,n	syscall_restore_rfi

@ -1978,15 +1978,23 @@ syscall_restore_rfi:
 	/* sr2 should be set to zero for userspace syscalls */
 	STREG	%r0,TASK_PT_SR2(%r1)

-pt_regs_ok:
 	LDREG	TASK_PT_GR31(%r1),%r2
-	depi	3,31,2,%r2			   /* ensure return to user mode. */
-	STREG	%r2,TASK_PT_IAOQ0(%r1)
+	depi	3,31,2,%r2		   /* ensure return to user mode. */
+	STREG   %r2,TASK_PT_IAOQ0(%r1)
 	ldo	4(%r2),%r2
 	STREG	%r2,TASK_PT_IAOQ1(%r1)
-	copy	%r25,%r16
 	b	intr_restore
-	nop
+	copy	%r25,%r16
+
+pt_regs_ok:
+	LDREG	TASK_PT_IAOQ0(%r1),%r2
+	depi	3,31,2,%r2		   /* ensure return to user mode. */
+	STREG	%r2,TASK_PT_IAOQ0(%r1)
+	LDREG	TASK_PT_IAOQ1(%r1),%r2
+	depi	3,31,2,%r2
+	STREG	%r2,TASK_PT_IAOQ1(%r1)
+	b	intr_restore
+	copy	%r25,%r16

 	.import schedule,code
 syscall_do_resched:
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@ -410,11 +410,13 @@ void __init init_IRQ(void)
 {
 	local_irq_disable();	/* PARANOID - should already be disabled */
 	mtctl(~0UL, 23);	/* EIRR : clear all pending external intr */
-	claim_cpu_irqs();
 #ifdef CONFIG_SMP
-	if (!cpu_eiem)
+	if (!cpu_eiem) {
+		claim_cpu_irqs();
 		cpu_eiem = EIEM_MASK(IPI_IRQ) | EIEM_MASK(TIMER_IRQ);
+	}
 #else
+	claim_cpu_irqs();
 	cpu_eiem = EIEM_MASK(TIMER_IRQ);
 #endif
        set_eiem(cpu_eiem);	/* EIEM : enable all external intr */
--- a/arch/parisc/kernel/ptrace.c
+++ b/arch/parisc/kernel/ptrace.c
@ -26,7 +26,7 @@
 #include <asm/asm-offsets.h>

 /* PSW bits we allow the debugger to modify */
-#define USER_PSW_BITS	(PSW_N | PSW_V | PSW_CB)
+#define USER_PSW_BITS	(PSW_N | PSW_B | PSW_V | PSW_CB)

 /*
 * Called by kernel/ptrace.c when detaching..
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@ -190,8 +190,10 @@ get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
 	DBG(1,"get_sigframe: ka = %#lx, sp = %#lx, frame_size = %#lx\n",
 			(unsigned long)ka, sp, frame_size);
 	
+	/* Align alternate stack and reserve 64 bytes for the signal
+	   handler's frame marker.  */
 	if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp))
-		sp = current->sas_ss_sp; /* Stacks grow up! */
+		sp = (current->sas_ss_sp + 0x7f) & ~0x3f; /* Stacks grow up! */

 	DBG(1,"get_sigframe: Returning sp = %#lx\n", (unsigned long)sp);
 	return (void __user *) sp; /* Stacks grow up.  Fun. */
--- a/arch/parisc/math-emu/cnv_float.h
+++ b/arch/parisc/math-emu/cnv_float.h
@ -347,16 +347,15 @@
    Sgl_isinexact_to_fix(sgl_value,exponent)

 #define Duint_from_sgl_mantissa(sgl_value,exponent,dresultA,dresultB)	\
-  {Sall(sgl_value) <<= SGL_EXP_LENGTH;  /*  left-justify  */		\
+  {unsigned int val = Sall(sgl_value) << SGL_EXP_LENGTH;		\
    if (exponent <= 31) {						\
-    	Dintp1(dresultA) = 0;						\
-    	Dintp2(dresultB) = (unsigned)Sall(sgl_value) >> (31 - exponent); \
+	Dintp1(dresultA) = 0;						\
+	Dintp2(dresultB) = val >> (31 - exponent);			\
    }									\
    else {								\
-    	Dintp1(dresultA) = Sall(sgl_value) >> (63 - exponent);		\
-    	Dintp2(dresultB) = Sall(sgl_value) << (exponent - 31);		\
+	Dintp1(dresultA) = val >> (63 - exponent);			\
+	Dintp2(dresultB) = exponent <= 62 ? val << (exponent - 31) : 0;	\
    }									\
-    Sall(sgl_value) >>= SGL_EXP_LENGTH;  /* return to original */	\
  }

 #define Duint_setzero(dresultA,dresultB) 	\
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@ -439,6 +439,8 @@ ret_from_fork:
 ret_from_kernel_thread:
 	REST_NVGPRS(r1)
 	bl	schedule_tail
+	li	r3,0
+	stw	r3,0(r1)
 	mtlr	r14
 	mr	r3,r15
 	PPC440EP_ERR42
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@ -664,6 +664,19 @@ resume_kernel:
 	ld	r4,TI_FLAGS(r9)
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	bne	1b
+
+	/*
+	 * arch_local_irq_restore() from preempt_schedule_irq above may
+	 * enable hard interrupt but we really should disable interrupts
+	 * when we return from the interrupt, and so that we don't get
+	 * interrupted after loading SRR0/1.
+	 */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	0
+#else
+	ld	r10,PACAKMSR(r13) /* Get kernel MSR without EE */
+	mtmsrd	r10,1		  /* Update machine state */
+#endif /* CONFIG_PPC_BOOK3E */
 #endif /* CONFIG_PREEMPT */

 	.globl	fast_exc_return_irq
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@ -154,12 +154,12 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs)
 static int kgdb_singlestep(struct pt_regs *regs)
 {
 	struct thread_info *thread_info, *exception_thread_info;
-	struct thread_info *backup_current_thread_info = \
-		(struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
+	struct thread_info *backup_current_thread_info;

 	if (user_mode(regs))
 		return 0;

+	backup_current_thread_info = (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
 	/*
 	 * On Book E and perhaps other processors, singlestep is handled on
 	 * the critical exception stack.  This causes current_thread_info()
@ -185,6 +185,7 @@ static int kgdb_singlestep(struct pt_regs *regs)
 		/* Restore current_thread_info lastly. */
 		memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info);

+	kfree(backup_current_thread_info);
 	return 1;
 }

--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@ -494,10 +494,15 @@ void timer_interrupt(struct pt_regs * regs)
 	set_dec(DECREMENTER_MAX);

 	/* Some implementations of hotplug will get timer interrupts while
-	 * offline, just ignore these
+	 * offline, just ignore these and we also need to set
+	 * decrementers_next_tb as MAX to make sure __check_irq_replay
+	 * don't replay timer interrupt when return, otherwise we'll trap
+	 * here infinitely :(
 	 */
-	if (!cpu_online(smp_processor_id()))
+	if (!cpu_online(smp_processor_id())) {
+		*next_tb = ~(u64)0;
 		return;
+	}

 	/* Conditionally hard-enable interrupts now that the DEC has been
 	 * bumped to its maximum value
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@ -39,6 +39,7 @@
 #define OP_31_XOP_TRAP      4
 #define OP_31_XOP_LWZX      23
 #define OP_31_XOP_TRAP_64   68
+#define OP_31_XOP_DCBF      86
 #define OP_31_XOP_LBZX      87
 #define OP_31_XOP_STWX      151
 #define OP_31_XOP_STBX      215
@ -374,6 +375,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			emulated = kvmppc_emulate_mtspr(vcpu, sprn, rs);
 			break;

+		case OP_31_XOP_DCBF:
 		case OP_31_XOP_DCBI:
 			/* Do nothing. The guest is performing dcbi because
 			 * hardware DMA is not snooped by the dcache, but
--- a/arch/powerpc/oprofile/op_model_power4.c
+++ b/arch/powerpc/oprofile/op_model_power4.c
@ -52,7 +52,7 @@ static int power7_marked_instr_event(u64 mmcr1)
 	for (pmc = 0; pmc < 4; pmc++) {
 		psel = mmcr1 & (OPROFILE_PM_PMCSEL_MSK
 				<< (OPROFILE_MAX_PMC_NUM - pmc)
-				* OPROFILE_MAX_PMC_NUM);
+				* OPROFILE_PMSEL_FIELD_WIDTH);
 		psel = (psel >> ((OPROFILE_MAX_PMC_NUM - pmc)
 				 * OPROFILE_PMSEL_FIELD_WIDTH)) & ~1ULL;
 		unit = mmcr1 & (OPROFILE_PM_UNIT_MSK
--- a/arch/powerpc/platforms/pasemi/cpufreq.c
+++ b/arch/powerpc/platforms/pasemi/cpufreq.c
@ -236,6 +236,13 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)

 static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 {
+	/*
+	 * We don't support CPU hotplug. Don't unmap after the system
+	 * has already made it to a running state.
+	 */
+	if (system_state != SYSTEM_BOOTING)
+		return 0;
+
 	if (sdcasr_mapbase)
 		iounmap(sdcasr_mapbase);
 	if (sdcpwr_mapbase)
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@ -1365,6 +1365,18 @@ static inline void pmdp_invalidate(struct vm_area_struct *vma,
 	__pmd_idte(address, pmdp);
 }

+#define __HAVE_ARCH_PMDP_SET_WRPROTECT
+static inline void pmdp_set_wrprotect(struct mm_struct *mm,
+				      unsigned long address, pmd_t *pmdp)
+{
+	pmd_t pmd = *pmdp;
+
+	if (pmd_write(pmd)) {
+		__pmd_idte(address, pmdp);
+		set_pmd_at(mm, address, pmdp, pmd_wrprotect(pmd));
+	}
+}
+
 static inline pmd_t mk_pmd_phys(unsigned long physpage, pgprot_t pgprot)
 {
 	pmd_t __pmd;
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@ -71,7 +71,7 @@ GCOV_PROFILE := n
 $(obj)/bzImage: asflags-y  := $(SVGA_MODE)

 quiet_cmd_image = BUILD   $@
-cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin > $@
+cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/zoffset.h > $@

 $(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE
 	$(call if_changed,image)
@ -92,7 +92,7 @@ targets += voffset.h
 $(obj)/voffset.h: vmlinux FORCE
 	$(call if_changed,voffset)

-sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
+sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|startup_64\|efi_pe_entry\|efi_stub_entry\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'

 quiet_cmd_zoffset = ZOFFSET $@
      cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
--- a/Show More
+++ b/Show More