diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
index 49b76aa16e5f..f5aeb3959afd 100644
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -11,7 +11,7 @@ cpcap: pmic@0 {
 		compatible = "motorola,cpcap", "st,6556002";
 		reg = <0>;	/* cs0 */
 		interrupt-parent = <&gpio1>;
-		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		#address-cells = <1>;
@@ -19,6 +19,32 @@ cpcap: pmic@0 {
 		spi-max-frequency = <3000000>;
 		spi-cs-high;
 
+		cpcap_adc: adc {
+			compatible = "motorola,mapphone-cpcap-adc";
+			interrupts-extended = <&cpcap 8 0>;
+			interrupt-names = "adcdone";
+			#io-channel-cells = <1>;
+		};
+
+		cpcap_charger: charger {
+			compatible = "motorola,mapphone-cpcap-charger";
+			interrupts-extended = <
+				&cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
+				&cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
+			>;
+			interrupt-names =
+				"chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+				"rvrs_mode", "chrgcurr1", "vbusvld", "battdetb";
+			mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
+				      &gpio3 23 GPIO_ACTIVE_LOW>;
+			io-channels = <&cpcap_adc 0 &cpcap_adc 1
+				       &cpcap_adc 2 &cpcap_adc 5
+				       &cpcap_adc 6>;
+			io-channel-names = "battdetb", "battp",
+					   "vbus", "chg_isense",
+					   "batti";
+		};
+
 		cpcap_regulator: regulator {
 			compatible = "motorola,mapphone-cpcap-regulator";
 
@@ -39,6 +65,29 @@ power_button: button {
 			interrupts = <23 IRQ_TYPE_NONE>;
 		};
 
+		cpcap_usb2_phy: phy {
+			compatible = "motorola,mapphone-cpcap-usb-phy";
+			pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
+			pinctrl-1 = <&usb_ulpi_pins>;
+			pinctrl-2 = <&usb_utmi_pins>;
+			pinctrl-3 = <&uart3_pins>;
+			pinctrl-names = "default", "ulpi", "utmi", "uart";
+			#phy-cells = <0>;
+			interrupts-extended = <
+				&cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
+				&cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
+				&cpcap 48 1
+			>;
+			interrupt-names =
+				"id_ground", "id_float", "se0conn", "vbusvld",
+				"sessvld", "sessend", "se1", "dm", "dp";
+			mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
+				      &gpio1 0 GPIO_ACTIVE_HIGH>;
+			io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
+			io-channel-names = "vbus", "id";
+			vusb-supply = <&vusb>;
+		};
+
 		led_red: led-red {
 			compatible = "motorola,cpcap-led-red";
 			vdd-supply = <&sw5>;
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index f27966e3cbc0..89eb607f4a9e 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -24,8 +24,7 @@ aliases {
 
 	/*
 	 * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
-	 * then 1023 - 1024 seems to contain mbm. For SRAM, see the notes
-	 * below about SRAM and L3_ICLK2 being unused by default,
+	 * then 1023 - 1024 seems to contain mbm.
 	 */
 	memory {
 		device_type = "memory";
@@ -176,11 +175,6 @@ lcd0_in: endpoint {
 	};
 };
 
-/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */
-&gpmc {
-	status = "disabled";
-};
-
 &hdmi {
 	status = "okay";
 	pinctrl-0 = <&dss_hdmi_pins>;
@@ -356,11 +350,6 @@ tsp@4a {
 	};
 };
 
-/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */
-&ocmcram {
-	status = "disabled";
-};
-
 &omap4_pmx_core {
 
 	/* hdmi_hpd.gpio_63 */