AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-04 11:06:58 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

ARM: dts: artpec: migrate ethernet to stmmac binding

Browse Source 
The snps,dwc-qos-ethernet binding is still supported as a glue layer
in the stmmac driver.
However, since the snps,dwc-qos-ethernet binding is now deprecated,
migrate to stmmac's native binding.

At the same time, enable features supported by the stmmac driver,
such as PTP, LPI, and an additional tx queue.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Niklas Cassel 2018-02-21 09:59:56 +01:00 committed by Arnd Bergmann
parent 60bed79840
commit b49de2dfcf
2 changed files with 36 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/boot/dts/artpec6-devboard.dts
View File

@ -59,6 +59,7 @@ &ethernet {
mdio {
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "snps,dwmac-mdio";
phy1: phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
device_type = "ethernet-phy";

42
arch/arm/boot/dts/artpec6.dtsi
View File

@ -188,19 +188,47 @@ amba@0 {
dma-ranges;
ethernet: ethernet@f8010000 {
clock-names = "phy_ref_clk", "apb_pclk";
clocks = <&eth_phy_ref_clk>,
<&clkctrl ARTPEC6_CLK_ETH_ACLK>;
compatible = "snps,dwc-qos-ethernet-4.10";
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "stmmaceth", "ptp_ref";
clocks = <&clkctrl ARTPEC6_CLK_ETH_ACLK>,
<&clkctrl ARTPEC6_CLK_PTP_REF>;
compatible = "snps,dwmac-4.10a", "snps,dwmac";
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "eth_lpi";
reg = <0xf8010000 0x4000>;
snps,write-requests = <2>;
snps,read-requests = <16>;
snps,axi-config = <&stmmac_axi_setup>;
snps,mtl-rx-config = <&mtl_rx_setup>;
snps,mtl-tx-config = <&mtl_tx_setup>;
snps,txpbl = <8>;
snps,rxpbl = <2>;
snps,aal;
snps,tso;
status = "disabled";
stmmac_axi_setup: stmmac-axi-config {
snps,wr_osr_lmt = <1>;
snps,rd_osr_lmt = <15>;
/* If FB is disabled, the AXI master chooses
* a burst length of any value less than the
* maximum enabled burst length
* (all lesser burst length enables are redundant).
*/
snps,blen = <0 0 0 0 16 0 0>;
};
mtl_rx_setup: rx-queues-config {
snps,rx-queues-to-use = <1>;
queue0 {};
};
mtl_tx_setup: tx-queues-config {
snps,tx-queues-to-use = <2>;
queue0 {};
queue1 {};
};
};
uart0: serial@f8036000 {