mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 00:00:52 +07:00
usb: otg: mv_otg: Start using struct usb_otg
Use struct usb_otg members with OTG specific functions instead of usb_phy members. [ balbi@ti.com : fixed a compile error on isp1704_charger.c ] Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
This commit is contained in:
parent
fcc8ebc990
commit
b1c711d629
@ -274,8 +274,8 @@ static void isp1704_charger_work(struct work_struct *data)
|
||||
case POWER_SUPPLY_TYPE_USB:
|
||||
default:
|
||||
/* enable data pullups */
|
||||
if (isp->phy->gadget)
|
||||
usb_gadget_connect(isp->phy->gadget);
|
||||
if (isp->phy->otg->gadget)
|
||||
usb_gadget_connect(isp->phy->otg->gadget);
|
||||
}
|
||||
break;
|
||||
case USB_EVENT_NONE:
|
||||
@ -293,8 +293,8 @@ static void isp1704_charger_work(struct work_struct *data)
|
||||
* chargers. The pullups may be enabled elsewhere, so this can
|
||||
* not be the final solution.
|
||||
*/
|
||||
if (isp->phy->gadget)
|
||||
usb_gadget_disconnect(isp->phy->gadget);
|
||||
if (isp->phy->otg->gadget)
|
||||
usb_gadget_disconnect(isp->phy->otg->gadget);
|
||||
|
||||
isp1704_charger_set_power(isp, 0);
|
||||
break;
|
||||
@ -459,8 +459,8 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev)
|
||||
* enumerated. The charger driver should be always loaded before any
|
||||
* gadget is loaded.
|
||||
*/
|
||||
if (isp->phy->gadget)
|
||||
usb_gadget_disconnect(isp->phy->gadget);
|
||||
if (isp->phy->otg->gadget)
|
||||
usb_gadget_disconnect(isp->phy->otg->gadget);
|
||||
|
||||
/* Detect charger if VBUS is valid (the cable was already plugged). */
|
||||
ret = isp1704_read(isp, ULPI_USB_INT_STS);
|
||||
|
@ -55,16 +55,16 @@ static char *state_string[] = {
|
||||
"a_vbus_err"
|
||||
};
|
||||
|
||||
static int mv_otg_set_vbus(struct usb_phy *otg, bool on)
|
||||
static int mv_otg_set_vbus(struct usb_otg *otg, bool on)
|
||||
{
|
||||
struct mv_otg *mvotg = container_of(otg, struct mv_otg, otg);
|
||||
struct mv_otg *mvotg = container_of(otg->phy, struct mv_otg, phy);
|
||||
if (mvotg->pdata->set_vbus == NULL)
|
||||
return -ENODEV;
|
||||
|
||||
return mvotg->pdata->set_vbus(on);
|
||||
}
|
||||
|
||||
static int mv_otg_set_host(struct usb_phy *otg,
|
||||
static int mv_otg_set_host(struct usb_otg *otg,
|
||||
struct usb_bus *host)
|
||||
{
|
||||
otg->host = host;
|
||||
@ -72,7 +72,7 @@ static int mv_otg_set_host(struct usb_phy *otg,
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mv_otg_set_peripheral(struct usb_phy *otg,
|
||||
static int mv_otg_set_peripheral(struct usb_otg *otg,
|
||||
struct usb_gadget *gadget)
|
||||
{
|
||||
otg->gadget = gadget;
|
||||
@ -203,7 +203,7 @@ static void mv_otg_init_irq(struct mv_otg *mvotg)
|
||||
static void mv_otg_start_host(struct mv_otg *mvotg, int on)
|
||||
{
|
||||
#ifdef CONFIG_USB
|
||||
struct usb_phy *otg = &mvotg->otg;
|
||||
struct usb_otg *otg = mvotg->phy.otg;
|
||||
struct usb_hcd *hcd;
|
||||
|
||||
if (!otg->host)
|
||||
@ -222,12 +222,12 @@ static void mv_otg_start_host(struct mv_otg *mvotg, int on)
|
||||
|
||||
static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on)
|
||||
{
|
||||
struct usb_phy *otg = &mvotg->otg;
|
||||
struct usb_otg *otg = mvotg->phy.otg;
|
||||
|
||||
if (!otg->gadget)
|
||||
return;
|
||||
|
||||
dev_info(otg->dev, "gadget %s\n", on ? "on" : "off");
|
||||
dev_info(mvotg->phy.dev, "gadget %s\n", on ? "on" : "off");
|
||||
|
||||
if (on)
|
||||
usb_gadget_vbus_connect(otg->gadget);
|
||||
@ -343,69 +343,69 @@ static void mv_otg_update_inputs(struct mv_otg *mvotg)
|
||||
static void mv_otg_update_state(struct mv_otg *mvotg)
|
||||
{
|
||||
struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl;
|
||||
struct usb_phy *otg = &mvotg->otg;
|
||||
int old_state = otg->state;
|
||||
struct usb_phy *phy = &mvotg->phy;
|
||||
int old_state = phy->state;
|
||||
|
||||
switch (old_state) {
|
||||
case OTG_STATE_UNDEFINED:
|
||||
otg->state = OTG_STATE_B_IDLE;
|
||||
phy->state = OTG_STATE_B_IDLE;
|
||||
/* FALL THROUGH */
|
||||
case OTG_STATE_B_IDLE:
|
||||
if (otg_ctrl->id == 0)
|
||||
otg->state = OTG_STATE_A_IDLE;
|
||||
phy->state = OTG_STATE_A_IDLE;
|
||||
else if (otg_ctrl->b_sess_vld)
|
||||
otg->state = OTG_STATE_B_PERIPHERAL;
|
||||
phy->state = OTG_STATE_B_PERIPHERAL;
|
||||
break;
|
||||
case OTG_STATE_B_PERIPHERAL:
|
||||
if (!otg_ctrl->b_sess_vld || otg_ctrl->id == 0)
|
||||
otg->state = OTG_STATE_B_IDLE;
|
||||
phy->state = OTG_STATE_B_IDLE;
|
||||
break;
|
||||
case OTG_STATE_A_IDLE:
|
||||
if (otg_ctrl->id)
|
||||
otg->state = OTG_STATE_B_IDLE;
|
||||
phy->state = OTG_STATE_B_IDLE;
|
||||
else if (!(otg_ctrl->a_bus_drop) &&
|
||||
(otg_ctrl->a_bus_req || otg_ctrl->a_srp_det))
|
||||
otg->state = OTG_STATE_A_WAIT_VRISE;
|
||||
phy->state = OTG_STATE_A_WAIT_VRISE;
|
||||
break;
|
||||
case OTG_STATE_A_WAIT_VRISE:
|
||||
if (otg_ctrl->a_vbus_vld)
|
||||
otg->state = OTG_STATE_A_WAIT_BCON;
|
||||
phy->state = OTG_STATE_A_WAIT_BCON;
|
||||
break;
|
||||
case OTG_STATE_A_WAIT_BCON:
|
||||
if (otg_ctrl->id || otg_ctrl->a_bus_drop
|
||||
|| otg_ctrl->a_wait_bcon_timeout) {
|
||||
mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
|
||||
mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
|
||||
otg->state = OTG_STATE_A_WAIT_VFALL;
|
||||
phy->state = OTG_STATE_A_WAIT_VFALL;
|
||||
otg_ctrl->a_bus_req = 0;
|
||||
} else if (!otg_ctrl->a_vbus_vld) {
|
||||
mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
|
||||
mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
|
||||
otg->state = OTG_STATE_A_VBUS_ERR;
|
||||
phy->state = OTG_STATE_A_VBUS_ERR;
|
||||
} else if (otg_ctrl->b_conn) {
|
||||
mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
|
||||
mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
|
||||
otg->state = OTG_STATE_A_HOST;
|
||||
phy->state = OTG_STATE_A_HOST;
|
||||
}
|
||||
break;
|
||||
case OTG_STATE_A_HOST:
|
||||
if (otg_ctrl->id || !otg_ctrl->b_conn
|
||||
|| otg_ctrl->a_bus_drop)
|
||||
otg->state = OTG_STATE_A_WAIT_BCON;
|
||||
phy->state = OTG_STATE_A_WAIT_BCON;
|
||||
else if (!otg_ctrl->a_vbus_vld)
|
||||
otg->state = OTG_STATE_A_VBUS_ERR;
|
||||
phy->state = OTG_STATE_A_VBUS_ERR;
|
||||
break;
|
||||
case OTG_STATE_A_WAIT_VFALL:
|
||||
if (otg_ctrl->id
|
||||
|| (!otg_ctrl->b_conn && otg_ctrl->a_sess_vld)
|
||||
|| otg_ctrl->a_bus_req)
|
||||
otg->state = OTG_STATE_A_IDLE;
|
||||
phy->state = OTG_STATE_A_IDLE;
|
||||
break;
|
||||
case OTG_STATE_A_VBUS_ERR:
|
||||
if (otg_ctrl->id || otg_ctrl->a_clr_err
|
||||
|| otg_ctrl->a_bus_drop) {
|
||||
otg_ctrl->a_clr_err = 0;
|
||||
otg->state = OTG_STATE_A_WAIT_VFALL;
|
||||
phy->state = OTG_STATE_A_WAIT_VFALL;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
@ -416,15 +416,17 @@ static void mv_otg_update_state(struct mv_otg *mvotg)
|
||||
static void mv_otg_work(struct work_struct *work)
|
||||
{
|
||||
struct mv_otg *mvotg;
|
||||
struct usb_phy *otg;
|
||||
struct usb_phy *phy;
|
||||
struct usb_otg *otg;
|
||||
int old_state;
|
||||
|
||||
mvotg = container_of((struct delayed_work *)work, struct mv_otg, work);
|
||||
|
||||
run:
|
||||
/* work queue is single thread, or we need spin_lock to protect */
|
||||
otg = &mvotg->otg;
|
||||
old_state = otg->state;
|
||||
phy = &mvotg->phy;
|
||||
otg = phy->otg;
|
||||
old_state = phy->state;
|
||||
|
||||
if (!mvotg->active)
|
||||
return;
|
||||
@ -432,14 +434,14 @@ static void mv_otg_work(struct work_struct *work)
|
||||
mv_otg_update_inputs(mvotg);
|
||||
mv_otg_update_state(mvotg);
|
||||
|
||||
if (old_state != otg->state) {
|
||||
if (old_state != phy->state) {
|
||||
dev_info(&mvotg->pdev->dev, "change from state %s to %s\n",
|
||||
state_string[old_state],
|
||||
state_string[otg->state]);
|
||||
state_string[phy->state]);
|
||||
|
||||
switch (otg->state) {
|
||||
switch (phy->state) {
|
||||
case OTG_STATE_B_IDLE:
|
||||
mvotg->otg.default_a = 0;
|
||||
otg->default_a = 0;
|
||||
if (old_state == OTG_STATE_B_PERIPHERAL)
|
||||
mv_otg_start_periphrals(mvotg, 0);
|
||||
mv_otg_reset(mvotg);
|
||||
@ -450,14 +452,14 @@ static void mv_otg_work(struct work_struct *work)
|
||||
mv_otg_start_periphrals(mvotg, 1);
|
||||
break;
|
||||
case OTG_STATE_A_IDLE:
|
||||
mvotg->otg.default_a = 1;
|
||||
otg->default_a = 1;
|
||||
mv_otg_enable(mvotg);
|
||||
if (old_state == OTG_STATE_A_WAIT_VFALL)
|
||||
mv_otg_start_host(mvotg, 0);
|
||||
mv_otg_reset(mvotg);
|
||||
break;
|
||||
case OTG_STATE_A_WAIT_VRISE:
|
||||
mv_otg_set_vbus(&mvotg->otg, 1);
|
||||
mv_otg_set_vbus(otg, 1);
|
||||
break;
|
||||
case OTG_STATE_A_WAIT_BCON:
|
||||
if (old_state != OTG_STATE_A_HOST)
|
||||
@ -479,7 +481,7 @@ static void mv_otg_work(struct work_struct *work)
|
||||
* here. In fact, it need host driver to notify us.
|
||||
*/
|
||||
mvotg->otg_ctrl.b_conn = 0;
|
||||
mv_otg_set_vbus(&mvotg->otg, 0);
|
||||
mv_otg_set_vbus(otg, 0);
|
||||
break;
|
||||
case OTG_STATE_A_VBUS_ERR:
|
||||
break;
|
||||
@ -548,8 +550,8 @@ set_a_bus_req(struct device *dev, struct device_attribute *attr,
|
||||
return -1;
|
||||
|
||||
/* We will use this interface to change to A device */
|
||||
if (mvotg->otg.state != OTG_STATE_B_IDLE
|
||||
&& mvotg->otg.state != OTG_STATE_A_IDLE)
|
||||
if (mvotg->phy.state != OTG_STATE_B_IDLE
|
||||
&& mvotg->phy.state != OTG_STATE_A_IDLE)
|
||||
return -1;
|
||||
|
||||
/* The clock may disabled and we need to set irq for ID detected */
|
||||
@ -579,7 +581,7 @@ set_a_clr_err(struct device *dev, struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
struct mv_otg *mvotg = dev_get_drvdata(dev);
|
||||
if (!mvotg->otg.default_a)
|
||||
if (!mvotg->phy.otg->default_a)
|
||||
return -1;
|
||||
|
||||
if (count > 2)
|
||||
@ -615,7 +617,7 @@ set_a_bus_drop(struct device *dev, struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
struct mv_otg *mvotg = dev_get_drvdata(dev);
|
||||
if (!mvotg->otg.default_a)
|
||||
if (!mvotg->phy.otg->default_a)
|
||||
return -1;
|
||||
|
||||
if (count > 2)
|
||||
@ -688,9 +690,10 @@ int mv_otg_remove(struct platform_device *pdev)
|
||||
for (clk_i = 0; clk_i <= mvotg->clknum; clk_i++)
|
||||
clk_put(mvotg->clk[clk_i]);
|
||||
|
||||
otg_set_transceiver(NULL);
|
||||
usb_set_transceiver(NULL);
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
|
||||
kfree(mvotg->phy.otg);
|
||||
kfree(mvotg);
|
||||
|
||||
return 0;
|
||||
@ -700,6 +703,7 @@ static int mv_otg_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
|
||||
struct mv_otg *mvotg;
|
||||
struct usb_otg *otg;
|
||||
struct resource *r;
|
||||
int retval = 0, clk_i, i;
|
||||
size_t size;
|
||||
@ -716,6 +720,12 @@ static int mv_otg_probe(struct platform_device *pdev)
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
otg = kzalloc(sizeof *otg, GFP_KERNEL);
|
||||
if (!otg) {
|
||||
kfree(mvotg);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, mvotg);
|
||||
|
||||
mvotg->pdev = pdev;
|
||||
@ -741,12 +751,15 @@ static int mv_otg_probe(struct platform_device *pdev)
|
||||
|
||||
/* OTG common part */
|
||||
mvotg->pdev = pdev;
|
||||
mvotg->otg.dev = &pdev->dev;
|
||||
mvotg->otg.label = driver_name;
|
||||
mvotg->otg.set_host = mv_otg_set_host;
|
||||
mvotg->otg.set_peripheral = mv_otg_set_peripheral;
|
||||
mvotg->otg.set_vbus = mv_otg_set_vbus;
|
||||
mvotg->otg.state = OTG_STATE_UNDEFINED;
|
||||
mvotg->phy.dev = &pdev->dev;
|
||||
mvotg->phy.otg = otg;
|
||||
mvotg->phy.label = driver_name;
|
||||
mvotg->phy.state = OTG_STATE_UNDEFINED;
|
||||
|
||||
otg->phy = &mvotg->phy;
|
||||
otg->set_host = mv_otg_set_host;
|
||||
otg->set_peripheral = mv_otg_set_peripheral;
|
||||
otg->set_vbus = mv_otg_set_vbus;
|
||||
|
||||
for (i = 0; i < OTG_TIMER_NUM; i++)
|
||||
init_timer(&mvotg->otg_ctrl.timer[i]);
|
||||
@ -840,7 +853,7 @@ static int mv_otg_probe(struct platform_device *pdev)
|
||||
goto err_disable_clk;
|
||||
}
|
||||
|
||||
retval = otg_set_transceiver(&mvotg->otg);
|
||||
retval = usb_set_transceiver(&mvotg->phy);
|
||||
if (retval < 0) {
|
||||
dev_err(&pdev->dev, "can't register transceiver, %d\n",
|
||||
retval);
|
||||
@ -867,7 +880,7 @@ static int mv_otg_probe(struct platform_device *pdev)
|
||||
return 0;
|
||||
|
||||
err_set_transceiver:
|
||||
otg_set_transceiver(NULL);
|
||||
usb_set_transceiver(NULL);
|
||||
err_free_irq:
|
||||
free_irq(mvotg->irq, mvotg);
|
||||
err_disable_clk:
|
||||
@ -888,6 +901,7 @@ static int mv_otg_probe(struct platform_device *pdev)
|
||||
clk_put(mvotg->clk[clk_i]);
|
||||
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
kfree(otg);
|
||||
kfree(mvotg);
|
||||
|
||||
return retval;
|
||||
@ -898,10 +912,10 @@ static int mv_otg_suspend(struct platform_device *pdev, pm_message_t state)
|
||||
{
|
||||
struct mv_otg *mvotg = platform_get_drvdata(pdev);
|
||||
|
||||
if (mvotg->otg.state != OTG_STATE_B_IDLE) {
|
||||
if (mvotg->phy.state != OTG_STATE_B_IDLE) {
|
||||
dev_info(&pdev->dev,
|
||||
"OTG state is not B_IDLE, it is %d!\n",
|
||||
mvotg->otg.state);
|
||||
mvotg->phy.state);
|
||||
return -EAGAIN;
|
||||
}
|
||||
|
||||
|
@ -136,7 +136,7 @@ struct mv_otg_regs {
|
||||
};
|
||||
|
||||
struct mv_otg {
|
||||
struct usb_phy otg;
|
||||
struct usb_phy phy;
|
||||
struct mv_otg_ctrl otg_ctrl;
|
||||
|
||||
/* base address */
|
||||
|
Loading…
Reference in New Issue
Block a user