diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index f43c43168b00..7f69e3dfcb13 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -419,6 +419,13 @@ crypto: crypto@90000 { clocks = <&nb_periph_clk 15>; }; + rwtm: mailbox@b0000 { + compatible = "marvell,armada-3700-rwtm-mailbox"; + reg = <0xb0000 0x100>; + interrupts = ; + #mbox-cells = <1>; + }; + sdhci1: sdhci@d0000 { compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index f34ee87a0f56..a7eb4e7697a2 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -73,16 +73,6 @@ cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus { gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; vin-supply = <&cp0_exp_usb3_1_current_regulator>; }; - - cp0_usb3_0_phy: cp0-usb3-0-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_0_vbus>; - }; - - cp0_usb3_1_phy: cp0-usb3-1-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_1_vbus>; - }; }; &i2c0 { @@ -124,6 +114,8 @@ &uart0 { &cp0_pcie2 { status = "okay"; + phys = <&cp0_comphy5 2>; + phy-names = "cp0-pcie2-x1-phy"; }; &cp0_i2c0 { @@ -219,15 +211,36 @@ partition@400000 { &cp0_sata0 { status = "okay"; + + sata-port@1 { + phys = <&cp0_comphy3 1>; + phy-names = "cp0-sata0-1-phy"; + }; +}; + +&cp0_comphy1 { + cp0_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_0_vbus>; + }; }; &cp0_usb3_0 { - usb-phy = <&cp0_usb3_0_phy>; + phys = <&cp0_comphy1 0>; + phy-names = "cp0-usb3h0-comphy"; status = "okay"; }; +&cp0_comphy4 { + cp0_usbh1_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_1_vbus>; + }; +}; + &cp0_usb3_1 { - usb-phy = <&cp0_usb3_1_phy>; + phys = <&cp0_comphy4 1>; + phy-names = "cp0-usb3h1-comphy"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index f275d9420d5b..bd881497b872 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -51,11 +51,6 @@ v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { status = "okay"; }; - usb3h0_phy: usb3_phy0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&v_5v0_usb3_hst_vbus>; - }; - sfp_cp0_eth0: sfp-cp0-eth0 { compatible = "sff,sfp"; i2c-bus = <&cp0_i2c1>; @@ -243,6 +238,8 @@ &cp0_pcie0 { pinctrl-names = "default"; pinctrl-0 = <&cp0_pci0_reset_pins &cp0_wlan_disable_pins>; reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>; + phys = <&cp0_comphy0 0>; + phy-names = "cp0-pcie0-x1-phy"; status = "okay"; }; @@ -348,6 +345,11 @@ cp1_wps_button_pins: wps-button-pins { &cp1_sata0 { pinctrl-0 = <&cp0_pci1_reset_pins>; status = "okay"; + + sata-port@1 { + phys = <&cp1_comphy0 1>; + phy-names = "cp1-sata0-1-phy"; + }; }; &cp1_mdio { @@ -467,7 +469,15 @@ spi-flash@0 { }; }; +&cp1_comphy2 { + cp1_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + &cp1_usb3_0 { - usb-phy = <&usb3h0_phy>; + phys = <&cp1_comphy2 0>; + phy-names = "cp1-usb3h0-comphy"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index d6e9c014c2f9..09fb5256f1db 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -54,11 +54,6 @@ cp0_usb3_0_phy: cp0-usb3-0-phy { vcc-supply = <&cp0_reg_usb3_0_vbus>; }; - cp0_usb3_1_phy: cp0-usb3-1-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_1_vbus>; - }; - cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus { compatible = "regulator-fixed"; regulator-name = "cp1-usb3h0-vbus"; @@ -108,11 +103,15 @@ &uart0 { /* CON6 on CP0 expansion */ &cp0_pcie0 { + phys = <&cp0_comphy0 0>; + phy-names = "cp0-pcie0-x1-phy"; status = "okay"; }; /* CON5 on CP0 expansion */ &cp0_pcie2 { + phys = <&cp0_comphy5 2>; + phy-names = "cp0-pcie2-x1-phy"; status = "okay"; }; @@ -143,6 +142,15 @@ expander1: pca9555@25 { /* CON4 on CP0 expansion */ &cp0_sata0 { status = "okay"; + + sata-port@0 { + phys = <&cp0_comphy1 0>; + phy-names = "cp0-sata0-0-phy"; + }; + sata-port@1 { + phys = <&cp0_comphy3 1>; + phy-names = "cp0-sata0-1-phy"; + }; }; /* CON9 on CP0 expansion */ @@ -151,9 +159,17 @@ &cp0_usb3_0 { status = "okay"; }; +&cp0_comphy4 { + cp0_usbh1_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_1_vbus>; + }; +}; + /* CON10 on CP0 expansion */ &cp0_usb3_1 { - usb-phy = <&cp0_usb3_1_phy>; + phys = <&cp0_comphy4 1>; + phy-names = "cp0-usb3h1-comphy"; status = "okay"; }; @@ -187,16 +203,22 @@ &cp0_eth2 { /* CON6 on CP1 expansion */ &cp1_pcie0 { + phys = <&cp1_comphy0 0>; + phy-names = "cp1-pcie0-x1-phy"; status = "okay"; }; /* CON7 on CP1 expansion */ &cp1_pcie1 { + phys = <&cp1_comphy4 1>; + phy-names = "cp1-pcie1-x1-phy"; status = "okay"; }; /* CON5 on CP1 expansion */ &cp1_pcie2 { + phys = <&cp1_comphy5 2>; + phy-names = "cp1-pcie2-x1-phy"; status = "okay"; }; @@ -273,6 +295,15 @@ partition@1000000 { /* CON4 on CP1 expansion */ &cp1_sata0 { status = "okay"; + + sata-port@0 { + phys = <&cp1_comphy1 0>; + phy-names = "cp1-sata0-0-phy"; + }; + sata-port@1 { + phys = <&cp1_comphy3 1>; + phy-names = "cp1-sata0-1-phy"; + }; }; /* CON9 on CP1 expansion */ diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi index 205071b45a32..d250f4b2bfed 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -61,11 +61,6 @@ v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { status = "okay"; }; - usb3h0_phy: usb3_phy0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&v_5v0_usb3_hst_vbus>; - }; - sfp_eth0: sfp-eth0 { /* CON15,16 - CPM lane 4 */ compatible = "sff,sfp"; @@ -186,6 +181,10 @@ &cp0_pcie0 { reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000 0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; + phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, + <&cp0_comphy2 0>, <&cp0_comphy3 0>; + phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy", + "cp0-pcie0-x4-lane2-phy", "cp0-pcie0-x4-lane3-phy"; status = "okay"; }; @@ -239,8 +238,13 @@ &cp0_eth0 { }; &cp0_sata0 { - /* CPM Lane 0 - U29 */ status = "okay"; + + /* CPM Lane 5 - U29 */ + sata-port@1 { + phys = <&cp0_comphy5 1>; + phy-names = "cp0-sata0-1-phy"; + }; }; &cp0_sdhci0 { @@ -324,9 +328,19 @@ &cp1_uart0 { }; &cp1_sata0 { - /* CPS Lane 1 - U32 */ - /* CPS Lane 3 - U31 */ status = "okay"; + + /* CPS Lane 1 - U32 */ + sata-port@0 { + phys = <&cp1_comphy1 0>; + phy-names = "cp1-sata0-0-phy"; + }; + + /* CPS Lane 3 - U31 */ + sata-port@1 { + phys = <&cp1_comphy3 1>; + phy-names = "cp1-sata0-1-phy"; + }; }; &cp1_spi1 { @@ -341,8 +355,16 @@ spi-flash@0 { }; }; +&cp1_comphy2 { + cp1_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + &cp1_usb3_0 { /* CPS Lane 2 - CON7 */ - usb-phy = <&usb3h0_phy>; + phys = <&cp1_comphy2 0>; + phy-names = "cp1-usb3h0-comphy"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi index ea13ae78f50d..c25bc65727b5 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi @@ -21,6 +21,7 @@ cpu0: cpu@0 { reg = <0x000>; enable-method = "psci"; #cooling-cells = <2>; + clocks = <&cpu_clk 0>; }; cpu1: cpu@1 { device_type = "cpu"; @@ -28,6 +29,7 @@ cpu1: cpu@1 { reg = <0x001>; enable-method = "psci"; #cooling-cells = <2>; + clocks = <&cpu_clk 0>; }; cpu2: cpu@100 { device_type = "cpu"; @@ -35,6 +37,7 @@ cpu2: cpu@100 { reg = <0x100>; enable-method = "psci"; #cooling-cells = <2>; + clocks = <&cpu_clk 1>; }; cpu3: cpu@101 { device_type = "cpu"; @@ -42,7 +45,7 @@ cpu3: cpu@101 { reg = <0x101>; enable-method = "psci"; #cooling-cells = <2>; + clocks = <&cpu_clk 1>; }; }; - }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 96228f93b272..d06dd198f2c7 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -280,6 +280,13 @@ ap_syscon1: system-controller@6f8000 { #address-cells = <1>; #size-cells = <1>; + cpu_clk: clock-cpu@278 { + compatible = "marvell,ap806-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + reg = <0x278 0xa30>; + }; + ap_thermal: thermal-sensor@80 { compatible = "marvell,armada-ap806-thermal"; reg = <0x80 0x10>; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index f71afb1de18f..d81944902650 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -133,6 +133,9 @@ CP110_LABEL(comphy): phy@120000 { compatible = "marvell,comphy-cp110"; reg = <0x120000 0x6000>; marvell,system-controller = <&CP110_LABEL(syscon0)>; + clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, + <&CP110_LABEL(clk) 1 18>; + clock-names = "mg_clk", "mg_core_clk", "axi_clk"; #address-cells = <1>; #size-cells = <0>; @@ -306,7 +309,17 @@ CP110_LABEL(sata0): sata@540000 { interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&CP110_LABEL(clk) 1 15>, <&CP110_LABEL(clk) 1 16>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; + + sata-port@0 { + reg = <0>; + }; + + sata-port@1 { + reg = <1>; + }; }; CP110_LABEL(xor0): xor@6a0000 {