diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt deleted file mode 100644 index e3f996920403..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt +++ /dev/null @@ -1,36 +0,0 @@ -Broadcom Kona Family CPU Enable Method --------------------------------------- -This binding defines the enable method used for starting secondary -CPUs in the following Broadcom SoCs: - BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664 - -The enable method is specified by defining the following required -properties in the "cpu" device tree node: - - enable-method = "brcm,bcm11351-cpu-method"; - - secondary-boot-reg = <...>; - -The secondary-boot-reg property is a u32 value that specifies the -physical address of the register used to request the ROM holding pen -code release a secondary CPU. The value written to the register is -formed by encoding the target CPU id into the low bits of the -physical start address it should jump to. - -Example: - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <1>; - enable-method = "brcm,bcm11351-cpu-method"; - secondary-boot-reg = <0x3500417c>; - }; - }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt deleted file mode 100644 index 0ff6560e6094..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt +++ /dev/null @@ -1,10 +0,0 @@ -Broadcom BCM11351 device tree bindings -------------------------------------------- - -Boards with the bcm281xx SoC family (which includes bcm11130, bcm11140, -bcm11351, bcm28145, bcm28155 SoCs) shall have the following properties: - -Required root node property: - -compatible = "brcm,bcm11351"; -DEPRECATED: compatible = "bcm,bcm11351"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml new file mode 100644 index 000000000000..b5ef2666e6b2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm11351.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM11351 device tree bindings + +maintainers: + - Florian Fainelli + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm28155-ap + - const: brcm,bcm11351 + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt deleted file mode 100644 index e0774255e1a6..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt +++ /dev/null @@ -1,15 +0,0 @@ -Broadcom BCM21664 device tree bindings --------------------------------------- - -This document describes the device tree bindings for boards with the BCM21664 -SoC. - -Required root node property: - - compatible: brcm,bcm21664 - -Example: - / { - model = "BCM21664 SoC"; - compatible = "brcm,bcm21664"; - [...] - } diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml new file mode 100644 index 000000000000..aafbd6a27708 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm21664.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM21664 device tree bindings + +maintainers: + - Florian Fainelli + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm21664-garnet + - const: brcm,bcm21664 + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt deleted file mode 100644 index a3af54c0e404..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt +++ /dev/null @@ -1,36 +0,0 @@ -Broadcom Kona Family CPU Enable Method --------------------------------------- -This binding defines the enable method used for starting secondary -CPUs in the following Broadcom SoCs: - BCM23550 - -The enable method is specified by defining the following required -properties in the "cpu" device tree node: - - enable-method = "brcm,bcm23550"; - - secondary-boot-reg = <...>; - -The secondary-boot-reg property is a u32 value that specifies the -physical address of the register used to request the ROM holding pen -code release a secondary CPU. The value written to the register is -formed by encoding the target CPU id into the low bits of the -physical start address it should jump to. - -Example: - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <1>; - enable-method = "brcm,bcm23550"; - secondary-boot-reg = <0x3500417c>; - }; - }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt deleted file mode 100644 index 080baad923d6..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt +++ /dev/null @@ -1,15 +0,0 @@ -Broadcom BCM23550 device tree bindings --------------------------------------- - -This document describes the device tree bindings for boards with the BCM23550 -SoC. - -Required root node property: - - compatible: brcm,bcm23550 - -Example: - / { - model = "BCM23550 SoC"; - compatible = "brcm,bcm23550"; - [...] - } diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml new file mode 100644 index 000000000000..c4b4efd28a55 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm23550.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM23550 device tree bindings + +maintainers: + - Florian Fainelli + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm23550-sparrow + - const: brcm,bcm23550 + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt deleted file mode 100644 index 8608a776caa7..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt +++ /dev/null @@ -1,15 +0,0 @@ -Broadcom BCM4708 device tree bindings -------------------------------------------- - -Boards with the BCM4708 SoC shall have the following properties: - -Required root node property: - -bcm4708 -compatible = "brcm,bcm4708"; - -bcm4709 -compatible = "brcm,bcm4709"; - -bcm53012 -compatible = "brcm,bcm53012"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml new file mode 100644 index 000000000000..d48313c7ae45 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4708.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM4708 device tree bindings + +description: + Broadcom BCM4708/47081/4709/47094/53012 Wi-Fi/network SoCs based + on the iProc architecture (Northstar). + +maintainers: + - Florian Fainelli + - Hauke Mehrtens + - Rafal Milecki + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: BCM4708 based boards + items: + - enum: + - asus,rt-ac56u + - asus,rt-ac68u + - buffalo,wzr-1750dhp + - linksys,ea6300-v1 + - linksys,ea6500-v2 + - luxul,xap-1510v1 + - luxul,xwc-1000 + - netgear,r6250v1 + - netgear,r6300v2 + - smartrg,sr400ac + - brcm,bcm94708 + - const: brcm,bcm4708 + + - description: BCM47081 based boards + items: + - enum: + - asus,rt-n18u + - buffalo,wzr-600dhp2 + - buffalo,wzr-900dhp + - luxul,xap-1410v1 + - luxul,xwr-1200v1 + - tplink,archer-c5-v2 + - const: brcm,bcm47081 + - const: brcm,bcm4708 + + - description: BCM4709 based boards + items: + - enum: + - asus,rt-ac87u + - buffalo,wxr-1900dhp + - linksys,ea9200 + - netgear,r7000 + - netgear,r8000 + - tplink,archer-c9-v1 + - brcm,bcm94709 + - const: brcm,bcm4709 + - const: brcm,bcm4708 + + - description: BCM47094 based boards + items: + - enum: + - dlink,dir-885l + - linksys,panamera + - luxul,abr-4500-v1 + - luxul,xap-1610-v1 + - luxul,xbr-4500-v1 + - luxul,xwc-2000-v1 + - luxul,xwr-3100v1 + - luxul,xwr-3150-v1 + - netgear,r8500 + - phicomm,k3 + - const: brcm,bcm47094 + - const: brcm,bcm4708 + + - description: BCM53012 based boards + items: + - enum: + - brcm,bcm953012er + - brcm,bcm953012hr + - brcm,bcm953012k + - const: brcm,brcm53012 + - const: brcm,bcm4708 +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt deleted file mode 100644 index 4c77169bb534..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt +++ /dev/null @@ -1,31 +0,0 @@ -Broadcom Cygnus device tree bindings ------------------------------------- - - -Boards with Cygnus SoCs shall have the following properties: - -Required root node property: - -BCM11300 -compatible = "brcm,bcm11300", "brcm,cygnus"; - -BCM11320 -compatible = "brcm,bcm11320", "brcm,cygnus"; - -BCM11350 -compatible = "brcm,bcm11350", "brcm,cygnus"; - -BCM11360 -compatible = "brcm,bcm11360", "brcm,cygnus"; - -BCM58300 -compatible = "brcm,bcm58300", "brcm,cygnus"; - -BCM58302 -compatible = "brcm,bcm58302", "brcm,cygnus"; - -BCM58303 -compatible = "brcm,bcm58303", "brcm,cygnus"; - -BCM58305 -compatible = "brcm,bcm58305", "brcm,cygnus"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml new file mode 100644 index 000000000000..fe111e72dac3 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,cygnus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Cygnus device tree bindings + +maintainers: + - Ray Jui + - Scott Branden + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm11300 + - brcm,bcm11320 + - brcm,bcm11350 + - brcm,bcm11360 + - brcm,bcm58300 + - brcm,bcm58302 + - brcm,bcm58303 + - brcm,bcm58305 + - const: brcm,cygnus + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt deleted file mode 100644 index a124c7fc4dcd..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt +++ /dev/null @@ -1,14 +0,0 @@ -Broadcom Hurricane 2 device tree bindings ---------------------------------------- - -Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs -are based on Broadcom's iProc SoC architecture and feature a single core Cortex -A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND -flash and a PCIe attached integrated switching engine. - -Boards with Hurricane SoCs shall have the following properties: - -Required root node property: - -BCM53342 -compatible = "brcm,bcm53342", "brcm,hr2"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml new file mode 100644 index 000000000000..1158f49b0b83 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,hr2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Hurricane 2 device tree bindings + +description: + Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs + are based on Broadcom's iProc SoC architecture and feature a single core Cortex + A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND + flash and a PCIe attached integrated switching engine. + +maintainers: + - Florian Fainelli + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - ubnt,unifi-switch8 + - const: brcm,bcm53342 + - const: brcm,hr2 + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt deleted file mode 100644 index 35f056f4a1c3..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt +++ /dev/null @@ -1,9 +0,0 @@ -Broadcom North Star 2 (NS2) device tree bindings ------------------------------------------------- - -Boards with NS2 shall have the following properties: - -Required root node property: - -NS2 SVK board -compatible = "brcm,ns2-svk", "brcm,ns2"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml new file mode 100644 index 000000000000..2451704f87f0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,ns2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom North Star 2 (NS2) device tree bindings + +maintainers: + - Ray Jui + - Scott Branden + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,ns2-svk + - brcm,ns2-xmc + - const: brcm,ns2 + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt deleted file mode 100644 index 677ef9d9f445..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt +++ /dev/null @@ -1,39 +0,0 @@ -Broadcom Northstar Plus SoC CPU Enable Method ---------------------------------------------- -This binding defines the enable method used for starting secondary -CPU in the following Broadcom SoCs: - BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312 - -The enable method is specified by defining the following required -properties in the corresponding secondary "cpu" device tree node: - - enable-method = "brcm,bcm-nsp-smp"; - - secondary-boot-reg = <...>; - -The secondary-boot-reg property is a u32 value that specifies the -physical address of the register which should hold the common -entry point for a secondary CPU. This entry is cpu node specific -and should be added per cpu. E.g., in case of NSP (BCM58625) which -is a dual core CPU SoC, this entry should be added to cpu1 node. - - -Example: - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - next-level-cache = <&L2>; - reg = <0>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - next-level-cache = <&L2>; - enable-method = "brcm,bcm-nsp-smp"; - secondary-boot-reg = <0xffff042c>; - reg = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt deleted file mode 100644 index eae53e4556be..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt +++ /dev/null @@ -1,34 +0,0 @@ -Broadcom Northstar Plus device tree bindings --------------------------------------------- - -Broadcom Northstar Plus family of SoCs are used for switching control -and management applications as well as residential router/gateway -applications. The SoC features dual core Cortex A9 ARM CPUs, integrating -several peripheral interfaces including multiple Gigabit Ethernet PHYs, -DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash, -SATA and several other IO controllers. - -Boards with Northstar Plus SoCs shall have the following properties: - -Required root node property: - -BCM58522 -compatible = "brcm,bcm58522", "brcm,nsp"; - -BCM58525 -compatible = "brcm,bcm58525", "brcm,nsp"; - -BCM58535 -compatible = "brcm,bcm58535", "brcm,nsp"; - -BCM58622 -compatible = "brcm,bcm58622", "brcm,nsp"; - -BCM58623 -compatible = "brcm,bcm58623", "brcm,nsp"; - -BCM58625 -compatible = "brcm,bcm58625", "brcm,nsp"; - -BCM88312 -compatible = "brcm,bcm88312", "brcm,nsp"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml new file mode 100644 index 000000000000..fe364cebf57f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,nsp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Northstar Plus device tree bindings + +description: + Broadcom Northstar Plus family of SoCs are used for switching control + and management applications as well as residential router/gateway + applications. The SoC features dual core Cortex A9 ARM CPUs, integrating + several peripheral interfaces including multiple Gigabit Ethernet PHYs, + DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash, + SATA and several other IO controllers. + +maintainers: + - Ray Jui + - Scott Branden + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm58522 + - brcm,bcm58525 + - brcm,bcm58535 + - brcm,bcm58622 + - brcm,bcm58623 + - brcm,bcm58625 + - brcm,bcm88312 + - const: brcm,nsp + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt deleted file mode 100644 index 23a02178dd44..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt +++ /dev/null @@ -1,12 +0,0 @@ -Broadcom Stingray device tree bindings ------------------------------------------------- - -Boards with Stingray shall have the following properties: - -Required root node property: - -Stingray Combo SVK board -compatible = "brcm,bcm958742k", "brcm,stingray"; - -Stingray SST100 board -compatible = "brcm,bcm958742t", "brcm,stingray"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml new file mode 100644 index 000000000000..4ad2b2124ab4 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,stingray.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Stingray device tree bindings + +maintainers: + - Ray Jui + - Scott Branden + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm958742k + - brcm,bcm958742t + - brcm,bcm958802a802x + - const: brcm,stingray + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt deleted file mode 100644 index 223ed3471c08..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt +++ /dev/null @@ -1,10 +0,0 @@ -Broadcom Vulcan device tree bindings ------------------------------------- - -Boards with Broadcom Vulcan shall have the following root property: - -Broadcom Vulcan Evaluation Board: - compatible = "brcm,vulcan-eval", "brcm,vulcan-soc"; - -Generic Vulcan board: - compatible = "brcm,vulcan-soc"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml new file mode 100644 index 000000000000..c5b6f31c20b9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml @@ -0,0 +1,22 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,vulcan-soc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Vulcan device tree bindings + +maintainers: + - Robert Richter + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,vulcan-eval + - cavium,thunderx2-cn9900 + - const: brcm,vulcan-soc + +... diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 7a9c3ce2dbef..644dfc5f0731 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -287,6 +287,39 @@ properties: While optional, it is the preferred way to get access to the cpu-core power-domains. + secondary-boot-reg: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: | + Required for systems that have an "enable-method" property value of + "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp". + + This includes the following SoCs: | + BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664, BCM23550 + BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312 + + The secondary-boot-reg property is a u32 value that specifies the + physical address of the register used to request the ROM holding pen + code release a secondary CPU. The value written to the register is + formed by encoding the target CPU id into the low bits of the + physical start address it should jump to. + +if: + # If the enable-method property contains one of those values + properties: + enable-method: + contains: + enum: + - brcm,bcm11351-cpu-method + - brcm,bcm23550 + - brcm,bcm-nsp-smp + # and if enable-method is present + required: + - enable-method + +then: + required: + - secondary-boot-reg + required: - device_type - reg diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index 1b5a835f66bd..e738de379b8d 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -20,6 +20,7 @@ memory@0 { }; aliases { + emmc2bus = &emmc2bus; ethernet0 = &genet; }; @@ -71,6 +72,79 @@ expgpio: gpio { }; }; +&gpio { + /* + * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "RGMII_MDIO", + "RGMIO_MDC", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + /* Shared with SPI flash */ + "PWM0_MISO", + "PWM1_MOSI", + "STATUS_LED_G_CLK", + "SPIFLASH_CE_N", + "SDA0", + "SCL0", + "RGMII_RXCLK", + "RGMII_RXCTL", + "RGMII_RXD0", + "RGMII_RXD1", + "RGMII_RXD2", + "RGMII_RXD3", + "RGMII_TXCLK", + "RGMII_TXCTL", + "RGMII_TXD0", + "RGMII_TXD1", + "RGMII_TXD2", + "RGMII_TXD3"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index d1e684d0acfd..a91cf68e3c4c 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -241,17 +241,32 @@ pwm1: pwm@7e20c800 { status = "disabled"; }; + hvs@7e400000 { + interrupts = ; + }; + }; + + /* + * emmc2 has different DMA constraints based on SoC revisions. It was + * moved into its own bus, so as for RPi4's firmware to update them. + * The firmware will find whether the emmc2bus alias is defined, and if + * so, it'll edit the dma-ranges property below accordingly. + */ + emmc2bus: emmc2bus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>; + dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>; + emmc2: emmc2@7e340000 { compatible = "brcm,bcm2711-emmc2"; - reg = <0x7e340000 0x100>; + reg = <0x0 0x7e340000 0x100>; interrupts = ; clocks = <&clocks BCM2711_CLOCK_EMMC2>; status = "disabled"; }; - - hvs@7e400000 { - interrupts = ; - }; }; arm-pmu {