dt-bindings: leds: add cznic,turris-omnia-leds binding

Add device-tree bindings documentation for Turris Omnia RGB LEDs.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml

@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/cznic,turris-omnia-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CZ.NIC's Turris Omnia LEDs driver
+
+maintainers:
+  - Marek Behún <marek.behun@nic.cz>
+
+description:
+  This module adds support for the RGB LEDs found on the front panel of the
+  Turris Omnia router. There are 12 RGB LEDs that are controlled by a
+  microcontroller that communicates via the I2C bus. Each LED is described
+  as a subnode of this I2C device.
+
+properties:
+  compatible:
+    const: cznic,turris-omnia-leds
+
+  reg:
+    description: I2C slave address of the microcontroller.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^multi-led[0-9a-f]$":
+    type: object
+    allOf:
+      - $ref: leds-class-multicolor.yaml#
+    description:
+      This node represents one of the RGB LED devices on Turris Omnia.
+      No subnodes need to be added for subchannels since this controller only
+      supports RGB LEDs.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 11
+        description:
+          This property identifies one of the LEDs on the front panel of the
+          Turris Omnia router.
+
+    required:
+      - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/leds/common.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@2b {
+            compatible = "cznic,turris-omnia-leds";
+            reg = <0x2b>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            multi-led@0 {
+                /*
+                 * No subnodes are needed, this controller only supports RGB
+                 * LEDs.
+                 */
+                reg = <0>;
+                color = <LED_COLOR_ID_MULTI>;
+                function = LED_FUNCTION_POWER;
+                linux,default-trigger = "heartbeat";
+            };
+
+            multi-led@a {
+                reg = <0xa>;
+                color = <LED_COLOR_ID_MULTI>;
+                function = LED_FUNCTION_INDICATOR;
+                function-enumerator = <1>;
+            };
+        };
+    };
+
+...