mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 18:06:43 +07:00
selftests: fib_tests: Add ipv4 route add append replace tests
Add IPv4 route tests covering add, append and replace permutations.
Assumes the ability to add a basic single path route works; this is
required for example when adding an address to an interface.
$ fib_tests.sh -t ipv4_rt
IPv4 route add / append tests
TEST: Attempt to add duplicate route - gw [ OK ]
TEST: Attempt to add duplicate route - dev only [ OK ]
TEST: Attempt to add duplicate route - reject route [ OK ]
TEST: Add new nexthop for existing prefix [ OK ]
TEST: Append nexthop to existing route - gw [ OK ]
TEST: Append nexthop to existing route - dev only [ OK ]
TEST: Append nexthop to existing route - reject route [ OK ]
TEST: Append nexthop to existing reject route - gw [ OK ]
TEST: Append nexthop to existing reject route - dev only [ OK ]
TEST: add multipath route [ OK ]
TEST: Attempt to add duplicate multipath route [ OK ]
TEST: Route add with different metrics [ OK ]
TEST: Route delete with metric [ OK ]
IPv4 route replace tests
TEST: Single path with single path [ OK ]
TEST: Single path with multipath [ OK ]
TEST: Single path with reject route [ OK ]
TEST: Single path with single path via multipath attribute [ OK ]
TEST: Invalid nexthop [ OK ]
TEST: Single path - replace of non-existent route [ OK ]
TEST: Multipath with multipath [ OK ]
TEST: Multipath with single path [ OK ]
TEST: Multipath with single path via multipath attribute [ OK ]
TEST: Multipath with reject route [ OK ]
TEST: Multipath - invalid first nexthop [ OK ]
TEST: Multipath - invalid second nexthop [ OK ]
TEST: Multipath - replace of non-existent route [ OK ]
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David Ahern
David S. Miller
parent
f9a5a9d89f
commit
abb1860aac
@ -6,7 +6,7 @@
|
||||
|
||||
ret=0
|
||||
|
||||
TESTS="unregister down carrier nexthop ipv6_rt"
|
||||
TESTS="unregister down carrier nexthop ipv6_rt ipv4_rt"
|
||||
VERBOSE=0
|
||||
PAUSE_ON_FAIL=no
|
||||
PAUSE=no
|
||||
@ -702,6 +702,12 @@ route_setup()
|
||||
$IP -6 addr add 2001:db8:103::2/64 dev veth4
|
||||
$IP -6 addr add 2001:db8:104::1/64 dev dummy1
|
||||
|
||||
$IP addr add 172.16.101.1/24 dev veth1
|
||||
$IP addr add 172.16.101.2/24 dev veth2
|
||||
$IP addr add 172.16.103.1/24 dev veth3
|
||||
$IP addr add 172.16.103.2/24 dev veth4
|
||||
$IP addr add 172.16.104.1/24 dev dummy1
|
||||
|
||||
set +ex
|
||||
}
|
||||
|
||||
@ -905,6 +911,276 @@ ipv6_route_test()
|
||||
route_cleanup
|
||||
}
|
||||
|
||||
# add route for a prefix, flushing any existing routes first
|
||||
# expected to be the first step of a test
|
||||
add_route()
|
||||
{
|
||||
local pfx="$1"
|
||||
local nh="$2"
|
||||
local out
|
||||
|
||||
if [ "$VERBOSE" = "1" ]; then
|
||||
echo
|
||||
echo " ##################################################"
|
||||
echo
|
||||
fi
|
||||
|
||||
run_cmd "$IP ro flush ${pfx}"
|
||||
[ $? -ne 0 ] && exit 1
|
||||
|
||||
out=$($IP ro ls match ${pfx})
|
||||
if [ -n "$out" ]; then
|
||||
echo "Failed to flush routes for prefix used for tests."
|
||||
exit 1
|
||||
fi
|
||||
|
||||
run_cmd "$IP ro add ${pfx} ${nh}"
|
||||
if [ $? -ne 0 ]; then
|
||||
echo "Failed to add initial route for test."
|
||||
exit 1
|
||||
fi
|
||||
}
|
||||
|
||||
# add initial route - used in replace route tests
|
||||
add_initial_route()
|
||||
{
|
||||
add_route "172.16.104.0/24" "$1"
|
||||
}
|
||||
|
||||
check_route()
|
||||
{
|
||||
local pfx="172.16.104.0/24"
|
||||
local expected="$1"
|
||||
local out
|
||||
local rc=0
|
||||
|
||||
out=$($IP ro ls match ${pfx})
|
||||
if [ -z "${out}" ]; then
|
||||
if [ "$VERBOSE" = "1" ]; then
|
||||
printf "\nNo route entry found\n"
|
||||
printf "Expected:\n"
|
||||
printf " ${expected}\n"
|
||||
fi
|
||||
return 1
|
||||
fi
|
||||
|
||||
# tricky way to convert output to 1-line without ip's
|
||||
# messy '\'; this drops all extra white space
|
||||
out=$(echo ${out})
|
||||
if [ "${out}" != "${expected}" ]; then
|
||||
rc=1
|
||||
if [ "${VERBOSE}" = "1" ]; then
|
||||
printf " Unexpected route entry. Have:\n"
|
||||
printf " ${out}\n"
|
||||
printf " Expected:\n"
|
||||
printf " ${expected}\n\n"
|
||||
fi
|
||||
fi
|
||||
|
||||
return $rc
|
||||
}
|
||||
|
||||
# assumption is that basic add of a single path route works
|
||||
# otherwise just adding an address on an interface is broken
|
||||
ipv4_rt_add()
|
||||
{
|
||||
local rc
|
||||
|
||||
echo
|
||||
echo "IPv4 route add / append tests"
|
||||
|
||||
# route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL
|
||||
add_route "172.16.104.0/24" "via 172.16.101.2"
|
||||
run_cmd "$IP ro add 172.16.104.0/24 via 172.16.103.2"
|
||||
log_test $? 2 "Attempt to add duplicate route - gw"
|
||||
|
||||
# route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL
|
||||
add_route "172.16.104.0/24" "via 172.16.101.2"
|
||||
run_cmd "$IP ro add 172.16.104.0/24 dev veth3"
|
||||
log_test $? 2 "Attempt to add duplicate route - dev only"
|
||||
|
||||
# route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL
|
||||
add_route "172.16.104.0/24" "via 172.16.101.2"
|
||||
run_cmd "$IP ro add unreachable 172.16.104.0/24"
|
||||
log_test $? 2 "Attempt to add duplicate route - reject route"
|
||||
|
||||
# iproute2 prepend only sets NLM_F_CREATE
|
||||
# - adds a new route; does NOT convert existing route to ECMP
|
||||
add_route "172.16.104.0/24" "via 172.16.101.2"
|
||||
run_cmd "$IP ro prepend 172.16.104.0/24 via 172.16.103.2"
|
||||
check_route "172.16.104.0/24 via 172.16.103.2 dev veth3 172.16.104.0/24 via 172.16.101.2 dev veth1"
|
||||
log_test $? 0 "Add new nexthop for existing prefix"
|
||||
|
||||
# route append with same prefix adds a new route
|
||||
# - iproute2 sets NLM_F_CREATE | NLM_F_APPEND
|
||||
add_route "172.16.104.0/24" "via 172.16.101.2"
|
||||
run_cmd "$IP ro append 172.16.104.0/24 via 172.16.103.2"
|
||||
check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 172.16.104.0/24 via 172.16.103.2 dev veth3"
|
||||
log_test $? 0 "Append nexthop to existing route - gw"
|
||||
|
||||
add_route "172.16.104.0/24" "via 172.16.101.2"
|
||||
run_cmd "$IP ro append 172.16.104.0/24 dev veth3"
|
||||
check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 172.16.104.0/24 dev veth3 scope link"
|
||||
log_test $? 0 "Append nexthop to existing route - dev only"
|
||||
|
||||
add_route "172.16.104.0/24" "via 172.16.101.2"
|
||||
run_cmd "$IP ro append unreachable 172.16.104.0/24"
|
||||
check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 unreachable 172.16.104.0/24"
|
||||
log_test $? 0 "Append nexthop to existing route - reject route"
|
||||
|
||||
run_cmd "$IP ro flush 172.16.104.0/24"
|
||||
run_cmd "$IP ro add unreachable 172.16.104.0/24"
|
||||
run_cmd "$IP ro append 172.16.104.0/24 via 172.16.103.2"
|
||||
check_route "unreachable 172.16.104.0/24 172.16.104.0/24 via 172.16.103.2 dev veth3"
|
||||
log_test $? 0 "Append nexthop to existing reject route - gw"
|
||||
|
||||
run_cmd "$IP ro flush 172.16.104.0/24"
|
||||
run_cmd "$IP ro add unreachable 172.16.104.0/24"
|
||||
run_cmd "$IP ro append 172.16.104.0/24 dev veth3"
|
||||
check_route "unreachable 172.16.104.0/24 172.16.104.0/24 dev veth3 scope link"
|
||||
log_test $? 0 "Append nexthop to existing reject route - dev only"
|
||||
|
||||
# insert mpath directly
|
||||
add_route "172.16.104.0/24" "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
|
||||
check_route "172.16.104.0/24 nexthop via 172.16.101.2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1"
|
||||
log_test $? 0 "add multipath route"
|
||||
|
||||
add_route "172.16.104.0/24" "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
|
||||
run_cmd "$IP ro add 172.16.104.0/24 nexthop via 172.16.101.2 nexthop via 172.16.103.2"
|
||||
log_test $? 2 "Attempt to add duplicate multipath route"
|
||||
|
||||
# insert of a second route without append but different metric
|
||||
add_route "172.16.104.0/24" "via 172.16.101.2"
|
||||
run_cmd "$IP ro add 172.16.104.0/24 via 172.16.103.2 metric 512"
|
||||
rc=$?
|
||||
if [ $rc -eq 0 ]; then
|
||||
run_cmd "$IP ro add 172.16.104.0/24 via 172.16.103.3 metric 256"
|
||||
rc=$?
|
||||
fi
|
||||
log_test $rc 0 "Route add with different metrics"
|
||||
|
||||
run_cmd "$IP ro del 172.16.104.0/24 metric 512"
|
||||
rc=$?
|
||||
if [ $rc -eq 0 ]; then
|
||||
check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 172.16.104.0/24 via 172.16.103.3 dev veth3 metric 256"
|
||||
rc=$?
|
||||
fi
|
||||
log_test $rc 0 "Route delete with metric"
|
||||
}
|
||||
|
||||
ipv4_rt_replace_single()
|
||||
{
|
||||
# single path with single path
|
||||
#
|
||||
add_initial_route "via 172.16.101.2"
|
||||
run_cmd "$IP ro replace 172.16.104.0/24 via 172.16.103.2"
|
||||
check_route "172.16.104.0/24 via 172.16.103.2 dev veth3"
|
||||
log_test $? 0 "Single path with single path"
|
||||
|
||||
# single path with multipath
|
||||
#
|
||||
add_initial_route "nexthop via 172.16.101.2"
|
||||
run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3 nexthop via 172.16.103.2"
|
||||
check_route "172.16.104.0/24 nexthop via 172.16.101.3 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1"
|
||||
log_test $? 0 "Single path with multipath"
|
||||
|
||||
# single path with reject
|
||||
#
|
||||
add_initial_route "nexthop via 172.16.101.2"
|
||||
run_cmd "$IP ro replace unreachable 172.16.104.0/24"
|
||||
check_route "unreachable 172.16.104.0/24"
|
||||
log_test $? 0 "Single path with reject route"
|
||||
|
||||
# single path with single path using MULTIPATH attribute
|
||||
#
|
||||
add_initial_route "via 172.16.101.2"
|
||||
run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.103.2"
|
||||
check_route "172.16.104.0/24 via 172.16.103.2 dev veth3"
|
||||
log_test $? 0 "Single path with single path via multipath attribute"
|
||||
|
||||
# route replace fails - invalid nexthop
|
||||
add_initial_route "via 172.16.101.2"
|
||||
run_cmd "$IP ro replace 172.16.104.0/24 via 2001:db8:104::2"
|
||||
if [ $? -eq 0 ]; then
|
||||
# previous command is expected to fail so if it returns 0
|
||||
# that means the test failed.
|
||||
log_test 0 1 "Invalid nexthop"
|
||||
else
|
||||
check_route "172.16.104.0/24 via 172.16.101.2 dev veth1"
|
||||
log_test $? 0 "Invalid nexthop"
|
||||
fi
|
||||
|
||||
# replace non-existent route
|
||||
# - note use of change versus replace since ip adds NLM_F_CREATE
|
||||
# for replace
|
||||
add_initial_route "via 172.16.101.2"
|
||||
run_cmd "$IP ro change 172.16.105.0/24 via 172.16.101.2"
|
||||
log_test $? 2 "Single path - replace of non-existent route"
|
||||
}
|
||||
|
||||
ipv4_rt_replace_mpath()
|
||||
{
|
||||
# multipath with multipath
|
||||
add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
|
||||
run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3 nexthop via 172.16.103.3"
|
||||
check_route "172.16.104.0/24 nexthop via 172.16.101.3 dev veth1 weight 1 nexthop via 172.16.103.3 dev veth3 weight 1"
|
||||
log_test $? 0 "Multipath with multipath"
|
||||
|
||||
# multipath with single
|
||||
add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
|
||||
run_cmd "$IP ro replace 172.16.104.0/24 via 172.16.101.3"
|
||||
check_route "172.16.104.0/24 via 172.16.101.3 dev veth1"
|
||||
log_test $? 0 "Multipath with single path"
|
||||
|
||||
# multipath with single
|
||||
add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
|
||||
run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3"
|
||||
check_route "172.16.104.0/24 via 172.16.101.3 dev veth1"
|
||||
log_test $? 0 "Multipath with single path via multipath attribute"
|
||||
|
||||
# multipath with reject
|
||||
add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
|
||||
run_cmd "$IP ro replace unreachable 172.16.104.0/24"
|
||||
check_route "unreachable 172.16.104.0/24"
|
||||
log_test $? 0 "Multipath with reject route"
|
||||
|
||||
# route replace fails - invalid nexthop 1
|
||||
add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
|
||||
run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.111.3 nexthop via 172.16.103.3"
|
||||
check_route "172.16.104.0/24 nexthop via 172.16.101.2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1"
|
||||
log_test $? 0 "Multipath - invalid first nexthop"
|
||||
|
||||
# route replace fails - invalid nexthop 2
|
||||
add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
|
||||
run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3 nexthop via 172.16.113.3"
|
||||
check_route "172.16.104.0/24 nexthop via 172.16.101.2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1"
|
||||
log_test $? 0 "Multipath - invalid second nexthop"
|
||||
|
||||
# multipath non-existent route
|
||||
add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
|
||||
run_cmd "$IP ro change 172.16.105.0/24 nexthop via 172.16.101.3 nexthop via 172.16.103.3"
|
||||
log_test $? 2 "Multipath - replace of non-existent route"
|
||||
}
|
||||
|
||||
ipv4_rt_replace()
|
||||
{
|
||||
echo
|
||||
echo "IPv4 route replace tests"
|
||||
|
||||
ipv4_rt_replace_single
|
||||
ipv4_rt_replace_mpath
|
||||
}
|
||||
|
||||
ipv4_route_test()
|
||||
{
|
||||
route_setup
|
||||
|
||||
ipv4_rt_add
|
||||
ipv4_rt_replace
|
||||
|
||||
route_cleanup
|
||||
}
|
||||
|
||||
################################################################################
|
||||
# usage
|
||||
|
||||
@ -968,6 +1244,7 @@ do
|
||||
fib_carrier_test|carrier) fib_carrier_test;;
|
||||
fib_nexthop_test|nexthop) fib_nexthop_test;;
|
||||
ipv6_route_test|ipv6_rt) ipv6_route_test;;
|
||||
ipv4_route_test|ipv4_rt) ipv4_route_test;;
|
||||
|
||||
help) echo "Test names: $TESTS"; exit 0;;
|
||||
esac
|
||||
|
||||
Loading…
Reference in New Issue
Block a user