diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c index e0d3310957ff..e77b274a09fd 100644 --- a/drivers/net/phy/bcm-phy-lib.c +++ b/drivers/net/phy/bcm-phy-lib.c @@ -423,6 +423,28 @@ int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev) } EXPORT_SYMBOL_GPL(bcm_phy_28nm_a0b0_afe_config_init); +int bcm_phy_enable_jumbo(struct phy_device *phydev) +{ + int ret; + + ret = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL); + if (ret < 0) + return ret; + + /* Enable extended length packet reception */ + ret = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL, + ret | MII_BCM54XX_AUXCTL_ACTL_EXT_PKT_LEN); + if (ret < 0) + return ret; + + /* Enable the elastic FIFO for raising the transmission limit from + * 4.5KB to 10KB, at the expense of an additional 16 ns in propagation + * latency. + */ + return phy_set_bits(phydev, MII_BCM54XX_ECR, MII_BCM54XX_ECR_FIFOE); +} +EXPORT_SYMBOL_GPL(bcm_phy_enable_jumbo); + MODULE_DESCRIPTION("Broadcom PHY Library"); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Broadcom Corporation"); diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h index c86fb9d1240c..129df819be8c 100644 --- a/drivers/net/phy/bcm-phy-lib.h +++ b/drivers/net/phy/bcm-phy-lib.h @@ -65,5 +65,6 @@ void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow, struct ethtool_stats *stats, u64 *data); void bcm_phy_r_rc_cal_reset(struct phy_device *phydev); int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev); +int bcm_phy_enable_jumbo(struct phy_device *phydev); #endif /* _LINUX_BCM_PHY_LIB_H */ diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index af8eabe7a6d4..692048d86ab1 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -178,6 +178,10 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev) break; } + if (ret) + return ret; + + ret = bcm_phy_enable_jumbo(phydev); if (ret) return ret; diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index b475e7f20d28..6462c5447872 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -79,6 +79,7 @@ #define MII_BCM54XX_ECR 0x10 /* BCM54xx extended control register */ #define MII_BCM54XX_ECR_IM 0x1000 /* Interrupt mask */ #define MII_BCM54XX_ECR_IF 0x0800 /* Interrupt force */ +#define MII_BCM54XX_ECR_FIFOE 0x0001 /* FIFO elasticity */ #define MII_BCM54XX_ESR 0x11 /* BCM54xx extended status register */ #define MII_BCM54XX_ESR_IS 0x1000 /* Interrupt status */ @@ -119,6 +120,7 @@ #define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x00 #define MII_BCM54XX_AUXCTL_ACTL_TX_6DB 0x0400 #define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800 +#define MII_BCM54XX_AUXCTL_ACTL_EXT_PKT_LEN 0x4000 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x07 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN 0x0010