AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-24 00:40:51 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

clocksource/drivers/nomadik-mtu: Handle 32kHz clock

Browse Source 
It happens on the U8420-sysclk Ux500 PRCMU firmware
variant that the MTU clock is just 32768 Hz, and in this
mode the minimum ticks is 5 rather than two.

I think this is simply so that there is enough time
for the register write to propagate through the
interconnect to the registers.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200628220153.67011-1-linus.walleij@linaro.org
This commit is contained in:
Linus Walleij 2020-06-29 00:01:53 +02:00 committed by Daniel Lezcano
parent ad7794d4dd
commit aaea0b8345
1 changed files with 9 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
drivers/clocksource/nomadik-mtu.c
View File

@ -186,6 +186,7 @@ static int __init nmdk_timer_init(void __iomem *base, int irq,
{
unsigned long rate;
int ret;
int min_ticks;
mtu_base = base;
@ -194,7 +195,8 @@ static int __init nmdk_timer_init(void __iomem *base, int irq,
/*
* Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
* for ux500.
* for ux500, and in one specific Ux500 case 32768 Hz.
*
* Use a divide-by-16 counter if the tick rate is more than 32MHz.
* At 32 MHz, the timer (with 32 bit counter) can be programmed
* to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
@ -230,7 +232,12 @@ static int __init nmdk_timer_init(void __iomem *base, int irq,
pr_err("%s: request_irq() failed\n", "Nomadik Timer Tick");
nmdk_clkevt.cpumask = cpumask_of(0);
nmdk_clkevt.irq = irq;
clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU);
if (rate < 100000)
min_ticks = 5;
else
min_ticks = 2;
clockevents_config_and_register(&nmdk_clkevt, rate, min_ticks,
0xffffffffU);
mtu_delay_timer.read_current_timer = &nmdk_timer_read_current_timer;
mtu_delay_timer.freq = rate;