ASoC: Intel: cht_bsw_rt5645: add Baytrail MCLK support

The existing code assumes a 19.2 MHz MCLK as the default
hardware configuration. This is valid for CherryTrail but
not for Baytrail.

Add explicit MCLK configuration to set the 19.2 clock on/off
depending on DAPM events.

This is a prerequisite step to enable devices with Baytrail
and RT5645 such as Asus X205TA

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Pierre-Louis Bossart 2017-01-26 14:09:38 -06:00 committed by Mark Brown
parent 39d7548568
commit a50477e55f

View File

@ -24,6 +24,9 @@
#include <linux/acpi.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <asm/cpu_device_id.h>
#include <asm/platform_sst_audio.h>
#include <linux/clk.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
@ -45,6 +48,7 @@ struct cht_mc_private {
struct snd_soc_jack jack;
struct cht_acpi_card *acpi_card;
char codec_name[16];
struct clk *mclk;
};
static inline struct snd_soc_dai *cht_get_codec_dai(struct snd_soc_card *card)
@ -65,6 +69,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
struct snd_soc_dapm_context *dapm = w->dapm;
struct snd_soc_card *card = dapm->card;
struct snd_soc_dai *codec_dai;
struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card);
int ret;
codec_dai = cht_get_codec_dai(card);
@ -73,19 +78,30 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
return -EIO;
}
if (!SND_SOC_DAPM_EVENT_OFF(event))
return 0;
if (SND_SOC_DAPM_EVENT_ON(event)) {
if (ctx->mclk) {
ret = clk_prepare_enable(ctx->mclk);
if (ret < 0) {
dev_err(card->dev,
"could not configure MCLK state");
return ret;
}
}
} else {
/* Set codec sysclk source to its internal clock because codec PLL will
* be off when idle and MCLK will also be off when codec is
* runtime suspended. Codec needs clock for jack detection and button
* press. MCLK is turned off with clock framework or ACPI.
*/
ret = snd_soc_dai_set_sysclk(codec_dai, RT5645_SCLK_S_RCCLK,
48000 * 512, SND_SOC_CLOCK_IN);
if (ret < 0) {
dev_err(card->dev, "can't set codec sysclk: %d\n", ret);
return ret;
}
/* Set codec sysclk source to its internal clock because codec PLL will
* be off when idle and MCLK will also be off by ACPI when codec is
* runtime suspended. Codec needs clock for jack detection and button
* press.
*/
ret = snd_soc_dai_set_sysclk(codec_dai, RT5645_SCLK_S_RCCLK,
0, SND_SOC_CLOCK_IN);
if (ret < 0) {
dev_err(card->dev, "can't set codec sysclk: %d\n", ret);
return ret;
if (ctx->mclk)
clk_disable_unprepare(ctx->mclk);
}
return 0;
@ -97,7 +113,7 @@ static const struct snd_soc_dapm_widget cht_dapm_widgets[] = {
SND_SOC_DAPM_MIC("Int Mic", NULL),
SND_SOC_DAPM_SPK("Ext Spk", NULL),
SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
platform_clock_control, SND_SOC_DAPM_POST_PMD),
platform_clock_control, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
};
static const struct snd_soc_dapm_route cht_rt5645_audio_map[] = {
@ -225,6 +241,26 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
rt5645_set_jack_detect(codec, &ctx->jack, &ctx->jack, &ctx->jack);
if (ctx->mclk) {
/*
* The firmware might enable the clock at
* boot (this information may or may not
* be reflected in the enable clock register).
* To change the rate we must disable the clock
* first to cover these cases. Due to common
* clock framework restrictions that do not allow
* to disable a clock that has not been enabled,
* we need to enable the clock first.
*/
ret = clk_prepare_enable(ctx->mclk);
if (!ret)
clk_disable_unprepare(ctx->mclk);
ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ);
if (ret)
dev_err(runtime->dev, "unable to set MCLK rate\n");
}
return ret;
}
@ -349,6 +385,18 @@ static struct cht_acpi_card snd_soc_cards[] = {
static char cht_rt5640_codec_name[16]; /* i2c-<HID>:00 with HID being 8 chars */
static bool is_valleyview(void)
{
static const struct x86_cpu_id cpu_ids[] = {
{ X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail */
{}
};
if (!x86_match_cpu(cpu_ids))
return false;
return true;
}
static int snd_cht_mc_probe(struct platform_device *pdev)
{
int ret_val = 0;
@ -391,6 +439,16 @@ static int snd_cht_mc_probe(struct platform_device *pdev)
cht_dailink[dai_index].codec_name = cht_rt5640_codec_name;
}
if (is_valleyview()) {
drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
if (IS_ERR(drv->mclk)) {
dev_err(&pdev->dev,
"Failed to get MCLK from pmc_plt_clk_3: %ld\n",
PTR_ERR(drv->mclk));
return PTR_ERR(drv->mclk);
}
}
snd_soc_card_set_drvdata(card, drv);
ret_val = devm_snd_soc_register_card(&pdev->dev, card);
if (ret_val) {