From a4d11fe50c238a7da5225d1399314c3505cbd792 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Wed, 25 Mar 2009 18:20:37 -0500 Subject: [PATCH] ASoC: remove trigger delay in Freescale MPC8610 sound driver Remove the delay from the trigger function in the Freescale MPC8610 sound driver when capture is started. This delay was used to ensure that the DMA controller was active when ALSA call the .pointer function to request a DMA transfer status. A better approach is for the .pointer function to detect that DMA has not started, and return zero instead. This change eliminates the need for the delay. Also add some related code to check for a DMA programming error, and report XRUN if it occurs. Signed-off-by: Timur Tabi Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_dma.c | 17 +++++++++++++++++ sound/soc/fsl/fsl_ssi.c | 20 ++------------------ 2 files changed, 19 insertions(+), 18 deletions(-) diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c index b3eb8570cd7b..2c4892c853cf 100644 --- a/sound/soc/fsl/fsl_dma.c +++ b/sound/soc/fsl/fsl_dma.c @@ -697,6 +697,23 @@ static snd_pcm_uframes_t fsl_dma_pointer(struct snd_pcm_substream *substream) else position = in_be32(&dma_channel->dar); + /* + * When capture is started, the SSI immediately starts to fill its FIFO. + * This means that the DMA controller is not started until the FIFO is + * full. However, ALSA calls this function before that happens, when + * MR.DAR is still zero. In this case, just return zero to indicate + * that nothing has been received yet. + */ + if (!position) + return 0; + + if ((position < dma_private->dma_buf_phys) || + (position > dma_private->dma_buf_end)) { + dev_err(substream->pcm->card->dev, + "dma pointer is out of range, halting stream\n"); + return SNDRV_PCM_POS_XRUN; + } + frames = bytes_to_frames(runtime, position - dma_private->dma_buf_phys); /* diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 169bca295b78..72823a2b33d6 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -466,28 +466,12 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd, case SNDRV_PCM_TRIGGER_START: clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) setbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE); - } else { - long timeout = jiffies + 10; - + else setbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE); - - /* Wait until the SSI has filled its FIFO. Without this - * delay, ALSA complains about overruns. When the FIFO - * is full, the DMA controller initiates its first - * transfer. Until then, however, the DMA's DAR - * register is zero, which translates to an - * out-of-bounds pointer. This makes ALSA think an - * overrun has occurred. - */ - while (!(in_be32(&ssi->sisr) & CCSR_SSI_SISR_RFF0) && - (jiffies < timeout)); - if (!(in_be32(&ssi->sisr) & CCSR_SSI_SISR_RFF0)) - return -EIO; - } break; case SNDRV_PCM_TRIGGER_STOP: