gpio: pcf857x: Switch to use gpiolib irqchip helpers

Switch the PCF857x GPIO driver to use the gpiolib irqchip helpers.
This driver uses a nested threaded interrupt, hence handle_nested_irq()
and gpiochip_set_chained_irqchip() must be used.

Note that this removes the checks added in commit 21fd3cd187
("gpio: pcf857x: call the gpio user handler iff gpio_to_irq is done"),
as the interrupt mappings are no longer created on-demand by the driver,
but by gpiochip_irqchip_add() during initialization.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Geert Uytterhoeven 2015-02-05 16:49:08 +01:00 committed by Linus Walleij
parent 6b516a1093
commit a39294bdf4
2 changed files with 28 additions and 94 deletions

View File

@ -604,6 +604,7 @@ config GPIO_PCA953X_IRQ
config GPIO_PCF857X
tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
depends on I2C
select GPIOLIB_IRQCHIP
select IRQ_DOMAIN
help
Say yes here to provide access to most "quasi-bidirectional" I2C

View File

@ -88,11 +88,9 @@ struct pcf857x {
struct gpio_chip chip;
struct i2c_client *client;
struct mutex lock; /* protect 'out' */
struct irq_domain *irq_domain; /* for irq demux */
spinlock_t slock; /* protect irq demux */
unsigned out; /* software latch */
unsigned status; /* current status */
unsigned irq_mapped; /* mapped gpio irqs */
int (*write)(struct i2c_client *client, unsigned data);
int (*read)(struct i2c_client *client);
@ -182,18 +180,6 @@ static void pcf857x_set(struct gpio_chip *chip, unsigned offset, int value)
/*-------------------------------------------------------------------------*/
static int pcf857x_to_irq(struct gpio_chip *chip, unsigned offset)
{
struct pcf857x *gpio = container_of(chip, struct pcf857x, chip);
int ret;
ret = irq_create_mapping(gpio->irq_domain, offset);
if (ret > 0)
gpio->irq_mapped |= (1 << offset);
return ret;
}
static irqreturn_t pcf857x_irq(int irq, void *data)
{
struct pcf857x *gpio = data;
@ -208,9 +194,9 @@ static irqreturn_t pcf857x_irq(int irq, void *data)
* interrupt source, just to avoid bad irqs
*/
change = ((gpio->status ^ status) & gpio->irq_mapped);
change = (gpio->status ^ status);
for_each_set_bit(i, &change, gpio->chip.ngpio)
generic_handle_irq(irq_find_mapping(gpio->irq_domain, i));
handle_nested_irq(irq_find_mapping(gpio->chip.irqdomain, i));
gpio->status = status;
spin_unlock_irqrestore(&gpio->slock, flags);
@ -218,66 +204,6 @@ static irqreturn_t pcf857x_irq(int irq, void *data)
return IRQ_HANDLED;
}
static int pcf857x_irq_domain_map(struct irq_domain *domain, unsigned int irq,
irq_hw_number_t hw)
{
struct pcf857x *gpio = domain->host_data;
irq_set_chip_and_handler(irq,
&dummy_irq_chip,
handle_level_irq);
#ifdef CONFIG_ARM
set_irq_flags(irq, IRQF_VALID);
#else
irq_set_noprobe(irq);
#endif
gpio->irq_mapped |= (1 << hw);
return 0;
}
static struct irq_domain_ops pcf857x_irq_domain_ops = {
.map = pcf857x_irq_domain_map,
};
static void pcf857x_irq_domain_cleanup(struct pcf857x *gpio)
{
if (gpio->irq_domain)
irq_domain_remove(gpio->irq_domain);
}
static int pcf857x_irq_domain_init(struct pcf857x *gpio,
struct i2c_client *client)
{
int status;
gpio->irq_domain = irq_domain_add_linear(client->dev.of_node,
gpio->chip.ngpio,
&pcf857x_irq_domain_ops,
gpio);
if (!gpio->irq_domain)
goto fail;
/* enable real irq */
status = devm_request_threaded_irq(&client->dev, client->irq,
NULL, pcf857x_irq, IRQF_ONESHOT |
IRQF_TRIGGER_FALLING | IRQF_SHARED,
dev_name(&client->dev), gpio);
if (status)
goto fail;
/* enable gpio_to_irq() */
gpio->chip.to_irq = pcf857x_to_irq;
return 0;
fail:
pcf857x_irq_domain_cleanup(gpio);
return -EINVAL;
}
/*-------------------------------------------------------------------------*/
static int pcf857x_probe(struct i2c_client *client,
@ -314,15 +240,6 @@ static int pcf857x_probe(struct i2c_client *client,
gpio->chip.direction_output = pcf857x_output;
gpio->chip.ngpio = id->driver_data;
/* enable gpio_to_irq() if platform has settings */
if (client->irq) {
status = pcf857x_irq_domain_init(gpio, client);
if (status < 0) {
dev_err(&client->dev, "irq_domain init failed\n");
goto fail_irq_domain;
}
}
/* NOTE: the OnSemi jlc1562b is also largely compatible with
* these parts, notably for output. It has a low-resolution
* DAC instead of pin change IRQs; and its inputs can be the
@ -398,6 +315,26 @@ static int pcf857x_probe(struct i2c_client *client,
if (status < 0)
goto fail;
/* Enable irqchip if we have an interrupt */
if (client->irq) {
status = gpiochip_irqchip_add(&gpio->chip, &dummy_irq_chip, 0,
handle_level_irq, IRQ_TYPE_NONE);
if (status) {
dev_err(&client->dev, "cannot add irqchip\n");
goto fail_irq;
}
status = devm_request_threaded_irq(&client->dev, client->irq,
NULL, pcf857x_irq, IRQF_ONESHOT |
IRQF_TRIGGER_FALLING | IRQF_SHARED,
dev_name(&client->dev), gpio);
if (status)
goto fail_irq;
gpiochip_set_chained_irqchip(&gpio->chip, &dummy_irq_chip,
client->irq, NULL);
}
/* Let platform code set up the GPIOs and their users.
* Now is the first time anyone could use them.
*/
@ -413,13 +350,12 @@ static int pcf857x_probe(struct i2c_client *client,
return 0;
fail:
if (client->irq)
pcf857x_irq_domain_cleanup(gpio);
fail_irq:
gpiochip_remove(&gpio->chip);
fail_irq_domain:
dev_dbg(&client->dev, "probe error %d for '%s'\n",
status, client->name);
fail:
dev_dbg(&client->dev, "probe error %d for '%s'\n", status,
client->name);
return status;
}
@ -441,9 +377,6 @@ static int pcf857x_remove(struct i2c_client *client)
}
}
if (client->irq)
pcf857x_irq_domain_cleanup(gpio);
gpiochip_remove(&gpio->chip);
return status;
}