From e3f25e6e5836c4790fbe395ff42e241f372d859d Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 26 Jun 2012 16:26:40 +0800 Subject: [PATCH 01/30] Thermal: Introduce multiple cooling states support This is because general active cooling devices, like fans, may have multiple speeds, which can be mapped to different cooling states. Signed-off-by: Zhang Rui Reviewed-by: Rafael J. Wysocki Reviewed-by: Valentin, Eduardo --- drivers/thermal/thermal_sys.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 2ab31e4f02cc..dc4044b682a1 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -1059,6 +1059,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) enum thermal_trip_type trip_type; struct thermal_cooling_device_instance *instance; struct thermal_cooling_device *cdev; + unsigned long cur_state, max_state; mutex_lock(&tz->lock); @@ -1098,10 +1099,17 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) cdev = instance->cdev; + cdev->ops->get_cur_state(cdev, &cur_state); + cdev->ops->get_max_state(cdev, &max_state); + if (temp >= trip_temp) - cdev->ops->set_cur_state(cdev, 1); + cur_state = cur_state < max_state ? + (cur_state + 1) : max_state; else - cdev->ops->set_cur_state(cdev, 0); + cur_state = cur_state > 0 ? + (cur_state - 1) : 0; + + cdev->ops->set_cur_state(cdev, cur_state); } break; case THERMAL_TRIP_PASSIVE: From 74051ba50583a5880d4536c1d9333e2493ddfd76 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 26 Jun 2012 16:27:22 +0800 Subject: [PATCH 02/30] Thermal: Introduce cooling states range support As the active cooling devices can have multiple cooling states, we may want only several cooling states for a certain trip point, and other cooling states for other active trip points. To do this, we should be able to describe the cooling device behavior for a certain trip point, rather than for the entire thermal zone. And when updating thermal zone, we need to check the upper and lower limit to make sure the cooling device is set to the proper cooling state. Note that this patch will not bring any different behavior as upper limit is set to max_state and lower limit is set to 0 in this patch, for now. Next patch will set these to real values. Signed-off-by: Zhang Rui Reviewed-by: Rafael J. Wysocki Reviewed-by: Eduardo Valentin --- drivers/thermal/thermal_sys.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index dc4044b682a1..d78c6dc6b00a 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -41,12 +41,19 @@ MODULE_AUTHOR("Zhang Rui"); MODULE_DESCRIPTION("Generic thermal management sysfs support"); MODULE_LICENSE("GPL"); +/* + * This structure is used to describe the behavior of + * a certain cooling device on a certain trip point + * in a certain thermal zone + */ struct thermal_cooling_device_instance { int id; char name[THERMAL_NAME_LENGTH]; struct thermal_zone_device *tz; struct thermal_cooling_device *cdev; int trip; + unsigned long upper; /* Highest cooling state for this trip point */ + unsigned long lower; /* Lowest cooling state for this trip point */ char attr_name[THERMAL_NAME_LENGTH]; struct device_attribute attr; struct list_head node; @@ -800,6 +807,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, struct thermal_cooling_device_instance *pos; struct thermal_zone_device *pos1; struct thermal_cooling_device *pos2; + unsigned long max_state; int result; if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE)) @@ -824,6 +832,11 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, dev->tz = tz; dev->cdev = cdev; dev->trip = trip; + + cdev->ops->get_max_state(cdev, &max_state); + dev->upper = max_state; + dev->lower = 0; + result = get_idr(&tz->idr, &tz->lock, &dev->id); if (result) goto free_mem; @@ -1103,11 +1116,15 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) cdev->ops->get_max_state(cdev, &max_state); if (temp >= trip_temp) - cur_state = cur_state < max_state ? - (cur_state + 1) : max_state; + cur_state = + cur_state < instance->upper ? + (cur_state + 1) : + instance->upper; else - cur_state = cur_state > 0 ? - (cur_state - 1) : 0; + cur_state = + cur_state > instance->lower ? + (cur_state - 1) : + instance->lower; cdev->ops->set_cur_state(cdev, cur_state); } From 9d99842f99d847191ebd0c28469d2c70fcc5bf9e Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 26 Jun 2012 16:35:57 +0800 Subject: [PATCH 03/30] Thermal: set upper and lower limits set upper and lower limits when binding a thermal cooling device to a thermal zone device. Signed-off-by: Zhang Rui Reviewed-by: Rafael J. Wysocki Reviewed-by: Eduardo Valentin --- Documentation/thermal/sysfs-api.txt | 9 ++++- drivers/acpi/thermal.c | 53 +++++++++++++++++++---------- drivers/platform/x86/acerhdf.c | 3 +- drivers/thermal/thermal_sys.c | 23 +++++++++---- include/linux/thermal.h | 5 ++- 5 files changed, 65 insertions(+), 28 deletions(-) diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index c087dbcf3535..ca1a1a34970e 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -84,7 +84,8 @@ temperature) and throttle appropriate devices. 1.3 interface for binding a thermal zone device with a thermal cooling device 1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, - int trip, struct thermal_cooling_device *cdev); + int trip, struct thermal_cooling_device *cdev, + unsigned long upper, unsigned long lower); This interface function bind a thermal cooling device to the certain trip point of a thermal zone device. @@ -93,6 +94,12 @@ temperature) and throttle appropriate devices. cdev: thermal cooling device trip: indicates which trip point the cooling devices is associated with in this thermal zone. + upper:the Maximum cooling state for this trip point. + THERMAL_NO_LIMIT means no upper limit, + and the cooling device can be in max_state. + lower:the Minimum cooling state can be used for this trip point. + THERMAL_NO_LIMIT means no lower limit, + and the cooling device can be in cooling state 0. 1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, int trip, struct thermal_cooling_device *cdev); diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 9fe90e9fecb5..d7ef69d835f2 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -729,11 +729,9 @@ static int thermal_notify(struct thermal_zone_device *thermal, int trip, return 0; } -typedef int (*cb)(struct thermal_zone_device *, int, - struct thermal_cooling_device *); static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal, struct thermal_cooling_device *cdev, - cb action) + bool bind) { struct acpi_device *device = cdev->devdata; struct acpi_thermal *tz = thermal->devdata; @@ -757,11 +755,19 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal, i++) { handle = tz->trips.passive.devices.handles[i]; status = acpi_bus_get_device(handle, &dev); - if (ACPI_SUCCESS(status) && (dev == device)) { - result = action(thermal, trip, cdev); - if (result) - goto failed; - } + if (ACPI_FAILURE(status) || dev != device) + continue; + if (bind) + result = + thermal_zone_bind_cooling_device + (thermal, trip, cdev, + THERMAL_NO_LIMIT, THERMAL_NO_LIMIT); + else + result = + thermal_zone_unbind_cooling_device + (thermal, trip, cdev); + if (result) + goto failed; } } @@ -774,11 +780,17 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal, j++) { handle = tz->trips.active[i].devices.handles[j]; status = acpi_bus_get_device(handle, &dev); - if (ACPI_SUCCESS(status) && (dev == device)) { - result = action(thermal, trip, cdev); - if (result) - goto failed; - } + if (ACPI_FAILURE(status) || dev != device) + continue; + if (bind) + result = thermal_zone_bind_cooling_device + (thermal, trip, cdev, + THERMAL_NO_LIMIT, THERMAL_NO_LIMIT); + else + result = thermal_zone_unbind_cooling_device + (thermal, trip, cdev); + if (result) + goto failed; } } @@ -786,7 +798,14 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal, handle = tz->devices.handles[i]; status = acpi_bus_get_device(handle, &dev); if (ACPI_SUCCESS(status) && (dev == device)) { - result = action(thermal, -1, cdev); + if (bind) + result = thermal_zone_bind_cooling_device + (thermal, -1, cdev, + THERMAL_NO_LIMIT, + THERMAL_NO_LIMIT); + else + result = thermal_zone_unbind_cooling_device + (thermal, -1, cdev); if (result) goto failed; } @@ -800,16 +819,14 @@ static int acpi_thermal_bind_cooling_device(struct thermal_zone_device *thermal, struct thermal_cooling_device *cdev) { - return acpi_thermal_cooling_device_cb(thermal, cdev, - thermal_zone_bind_cooling_device); + return acpi_thermal_cooling_device_cb(thermal, cdev, true); } static int acpi_thermal_unbind_cooling_device(struct thermal_zone_device *thermal, struct thermal_cooling_device *cdev) { - return acpi_thermal_cooling_device_cb(thermal, cdev, - thermal_zone_unbind_cooling_device); + return acpi_thermal_cooling_device_cb(thermal, cdev, false); } static const struct thermal_zone_device_ops acpi_thermal_zone_ops = { diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 39abb150bdd4..a207466f4ba8 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -329,7 +329,8 @@ static int acerhdf_bind(struct thermal_zone_device *thermal, if (cdev != cl_dev) return 0; - if (thermal_zone_bind_cooling_device(thermal, 0, cdev)) { + if (thermal_zone_bind_cooling_device(thermal, 0, cdev, + THERMAL_NO_LIMIT, THERMAL_NO_LIMIT)) { pr_err("error binding cooling dev\n"); return -EINVAL; } diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index d78c6dc6b00a..b04fe2c4b0d5 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -315,8 +315,9 @@ passive_store(struct device *dev, struct device_attribute *attr, if (!strncmp("Processor", cdev->type, sizeof("Processor"))) thermal_zone_bind_cooling_device(tz, - THERMAL_TRIPS_NONE, - cdev); + THERMAL_TRIPS_NONE, cdev, + THERMAL_NO_LIMIT, + THERMAL_NO_LIMIT); } mutex_unlock(&thermal_list_lock); if (!tz->passive_delay) @@ -801,7 +802,8 @@ static void thermal_zone_device_check(struct work_struct *work) */ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, int trip, - struct thermal_cooling_device *cdev) + struct thermal_cooling_device *cdev, + unsigned long upper, unsigned long lower) { struct thermal_cooling_device_instance *dev; struct thermal_cooling_device_instance *pos; @@ -825,6 +827,15 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, if (tz != pos1 || cdev != pos2) return -EINVAL; + cdev->ops->get_max_state(cdev, &max_state); + + /* lower default 0, upper default max_state */ + lower = lower == THERMAL_NO_LIMIT ? 0 : lower; + upper = upper == THERMAL_NO_LIMIT ? max_state : upper; + + if (lower > upper || upper > max_state) + return -EINVAL; + dev = kzalloc(sizeof(struct thermal_cooling_device_instance), GFP_KERNEL); if (!dev) @@ -832,10 +843,8 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, dev->tz = tz; dev->cdev = cdev; dev->trip = trip; - - cdev->ops->get_max_state(cdev, &max_state); - dev->upper = max_state; - dev->lower = 0; + dev->upper = upper; + dev->lower = lower; result = get_idr(&tz->idr, &tz->lock, &dev->id); if (result) diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 4b94a61955df..5946a3b90bb2 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -75,6 +75,8 @@ struct thermal_cooling_device_ops { int (*set_cur_state) (struct thermal_cooling_device *, unsigned long); }; +#define THERMAL_NO_LIMIT -1UL /* no upper/lower limit requirement */ + #define THERMAL_TRIPS_NONE -1 #define THERMAL_MAX_TRIPS 12 #define THERMAL_NAME_LENGTH 20 @@ -157,7 +159,8 @@ struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, void thermal_zone_device_unregister(struct thermal_zone_device *); int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, - struct thermal_cooling_device *); + struct thermal_cooling_device *, + unsigned long, unsigned long); int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int, struct thermal_cooling_device *); void thermal_zone_device_update(struct thermal_zone_device *); From 601f3d4242be6ed6f72a2aadabc91e8255dad811 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 27 Jun 2012 09:54:33 +0800 Subject: [PATCH 04/30] Thermal: Introduce .get_trend() callback. According to ACPI spec, tc1 and tc2 are used by OSPM to anticipate the temperature trends. We introduced the same concept to the generic thermal layer for passive cooling, but now it seems that these values are hard to be used on other platforms. So We introduce .get_trend() as a more general solution. For the platform thermal drivers that have their own way to anticipate the temperature trends, they should provide their own .get_trend() callback. Or else, we will calculate the temperature trends by simply comparing the current temperature and the cached previous temperature reading. Signed-off-by: Zhang Rui Reviewed-by: Rafael J. Wysocki Reviewed-by: Valentin, Eduardo --- drivers/acpi/thermal.c | 33 +++++++++++++++++++++++++++++++++ drivers/thermal/thermal_sys.c | 19 +++++++++++++++++-- include/linux/thermal.h | 9 +++++++++ 3 files changed, 59 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index d7ef69d835f2..bb95709a6be8 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -706,6 +706,38 @@ static int thermal_get_crit_temp(struct thermal_zone_device *thermal, return -EINVAL; } +static int thermal_get_trend(struct thermal_zone_device *thermal, + int trip, enum thermal_trend *trend) +{ + struct acpi_thermal *tz = thermal->devdata; + enum thermal_trip_type type; + int i; + + if (thermal_get_trip_type(thermal, trip, &type)) + return -EINVAL; + + /* Only PASSIVE trip points need TREND */ + if (type != THERMAL_TRIP_PASSIVE) + return -EINVAL; + + /* + * tz->temperature has already been updated by generic thermal layer, + * before this callback being invoked + */ + i = (tz->trips.passive.tc1 * (tz->temperature - tz->last_temperature)) + + (tz->trips.passive.tc2 + * (tz->temperature - tz->trips.passive.temperature)); + + if (i > 0) + *trend = THERMAL_TREND_RAISING; + else if (i < 0) + *trend = THERMAL_TREND_DROPPING; + else + *trend = THERMAL_TREND_STABLE; + return 0; +} + + static int thermal_notify(struct thermal_zone_device *thermal, int trip, enum thermal_trip_type trip_type) { @@ -838,6 +870,7 @@ static const struct thermal_zone_device_ops acpi_thermal_zone_ops = { .get_trip_type = thermal_get_trip_type, .get_trip_temp = thermal_get_trip_temp, .get_crit_temp = thermal_get_crit_temp, + .get_trend = thermal_get_trend, .notify = thermal_notify, }; diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index b04fe2c4b0d5..146aa043f15b 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -723,6 +723,20 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz, struct thermal_cooling_device *cdev; long state, max_state; + if (!tz->ops->get_trend || + tz->ops->get_trend(tz, trip, (enum thermal_trend *)&trend)) { + /* + * compare the current temperature and previous temperature + * to get the thermal trend, if no special requirement + */ + if (tz->temperature > tz->last_temperature) + trend = THERMAL_TREND_RAISING; + else if (tz->temperature < tz->last_temperature) + trend = THERMAL_TREND_DROPPING; + else + trend = THERMAL_TREND_STABLE; + } + /* * Above Trip? * ----------- @@ -1091,6 +1105,9 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) goto leave; } + tz->last_temperature = tz->temperature; + tz->temperature = temp; + for (count = 0; count < tz->trips; count++) { tz->ops->get_trip_type(tz, count, &trip_type); tz->ops->get_trip_temp(tz, count, &trip_temp); @@ -1150,8 +1167,6 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) thermal_zone_device_passive(tz, temp, tz->forced_passive, THERMAL_TRIPS_NONE); - tz->last_temperature = temp; - leave: if (tz->passive) thermal_zone_device_set_polling(tz, tz->passive_delay); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 5946a3b90bb2..6a1d43d2ec92 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -44,6 +44,12 @@ enum thermal_trip_type { THERMAL_TRIP_CRITICAL, }; +enum thermal_trend { + THERMAL_TREND_STABLE, /* temperature is stable */ + THERMAL_TREND_RAISING, /* temperature is raising */ + THERMAL_TREND_DROPPING, /* temperature is dropping */ +}; + struct thermal_zone_device_ops { int (*bind) (struct thermal_zone_device *, struct thermal_cooling_device *); @@ -65,6 +71,8 @@ struct thermal_zone_device_ops { int (*set_trip_hyst) (struct thermal_zone_device *, int, unsigned long); int (*get_crit_temp) (struct thermal_zone_device *, unsigned long *); + int (*get_trend) (struct thermal_zone_device *, int, + enum thermal_trend *); int (*notify) (struct thermal_zone_device *, int, enum thermal_trip_type); }; @@ -111,6 +119,7 @@ struct thermal_zone_device { int tc2; int passive_delay; int polling_delay; + int temperature; int last_temperature; bool passive; unsigned int forced_passive; From 1b7ddb840c3908464b19d4aa4f6dc4c463302442 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 27 Jun 2012 09:51:12 +0800 Subject: [PATCH 05/30] Thermal: Remove tc1/tc2 in generic thermal layer. Remove tc1/tc2 in generic thermal layer. .get_trend() callback starts to take effect from this patch. Signed-off-by: Zhang Rui Reviewed-by: Rafael J. Wysocki Reviewed-by: Valentin, Eduardo --- drivers/acpi/thermal.c | 5 +--- drivers/platform/x86/acerhdf.c | 2 +- drivers/platform/x86/intel_mid_thermal.c | 2 +- drivers/power/power_supply_core.c | 2 +- .../omap-thermal/omap-thermal-common.c | 2 +- drivers/thermal/spear_thermal.c | 2 +- drivers/thermal/thermal_sys.c | 24 +++++-------------- include/linux/thermal.h | 5 +--- 8 files changed, 13 insertions(+), 31 deletions(-) diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index bb95709a6be8..07cb2172bd09 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -897,15 +897,12 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) tz->thermal_zone = thermal_zone_device_register("acpitz", trips, 0, tz, &acpi_thermal_zone_ops, - tz->trips.passive.tc1, - tz->trips.passive.tc2, tz->trips.passive.tsp*100, tz->polling_frequency*100); else tz->thermal_zone = thermal_zone_device_register("acpitz", trips, 0, tz, - &acpi_thermal_zone_ops, - 0, 0, 0, + &acpi_thermal_zone_ops, 0, tz->polling_frequency*100); if (IS_ERR(tz->thermal_zone)) return -ENODEV; diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index a207466f4ba8..84c56881ba80 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -662,7 +662,7 @@ static int acerhdf_register_thermal(void) return -EINVAL; thz_dev = thermal_zone_device_register("acerhdf", 1, 0, NULL, - &acerhdf_dev_ops, 0, 0, 0, + &acerhdf_dev_ops, 0, (kernelmode) ? interval*1000 : 0); if (IS_ERR(thz_dev)) return -EINVAL; diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c index 3a27113deda9..c8097616dd62 100644 --- a/drivers/platform/x86/intel_mid_thermal.c +++ b/drivers/platform/x86/intel_mid_thermal.c @@ -502,7 +502,7 @@ static int mid_thermal_probe(struct platform_device *pdev) goto err; } pinfo->tzd[i] = thermal_zone_device_register(name[i], - 0, 0, td_info, &tzd_ops, 0, 0, 0, 0); + 0, 0, td_info, &tzd_ops, 0, 0); if (IS_ERR(pinfo->tzd[i])) { kfree(td_info); ret = PTR_ERR(pinfo->tzd[i]); diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c index 08cc8a3c15af..2436f1350013 100644 --- a/drivers/power/power_supply_core.c +++ b/drivers/power/power_supply_core.c @@ -201,7 +201,7 @@ static int psy_register_thermal(struct power_supply *psy) for (i = 0; i < psy->num_properties; i++) { if (psy->properties[i] == POWER_SUPPLY_PROP_TEMP) { psy->tzd = thermal_zone_device_register(psy->name, 0, 0, - psy, &psy_tzd_ops, 0, 0, 0, 0); + psy, &psy_tzd_ops, 0, 0); if (IS_ERR(psy->tzd)) return PTR_ERR(psy->tzd); break; diff --git a/drivers/staging/omap-thermal/omap-thermal-common.c b/drivers/staging/omap-thermal/omap-thermal-common.c index 0675a5e2f7c8..d543d5c37152 100644 --- a/drivers/staging/omap-thermal/omap-thermal-common.c +++ b/drivers/staging/omap-thermal/omap-thermal-common.c @@ -246,7 +246,7 @@ int omap_thermal_expose_sensor(struct omap_bandgap *bg_ptr, int id, /* Create thermal zone */ data->omap_thermal = thermal_zone_device_register(domain, OMAP_TRIP_NUMBER, 0, data, &omap_thermal_ops, - 0, FAST_TEMP_MONITORING_RATE, 0, 0); + 0, FAST_TEMP_MONITORING_RATE); if (IS_ERR_OR_NULL(data->omap_thermal)) { dev_err(bg_ptr->dev, "thermal zone device is NULL\n"); return PTR_ERR(data->omap_thermal); diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c index 5f8ee39f2000..9bc969261d01 100644 --- a/drivers/thermal/spear_thermal.c +++ b/drivers/thermal/spear_thermal.c @@ -147,7 +147,7 @@ static int spear_thermal_probe(struct platform_device *pdev) writel_relaxed(stdev->flags, stdev->thermal_base); spear_thermal = thermal_zone_device_register("spear_thermal", 0, 0, - stdev, &ops, 0, 0, 0, 0); + stdev, &ops, 0, 0); if (IS_ERR(spear_thermal)) { dev_err(&pdev->dev, "thermal zone device is NULL\n"); ret = PTR_ERR(spear_thermal); diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 146aa043f15b..0cf3dce55462 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -335,9 +335,6 @@ passive_store(struct device *dev, struct device_attribute *attr, tz->passive_delay = 0; } - tz->tc1 = 1; - tz->tc2 = 1; - tz->forced_passive = state; thermal_zone_device_update(tz); @@ -718,13 +715,12 @@ static void thermal_zone_device_set_polling(struct thermal_zone_device *tz, static void thermal_zone_device_passive(struct thermal_zone_device *tz, int temp, int trip_temp, int trip) { - int trend = 0; + enum thermal_trend trend; struct thermal_cooling_device_instance *instance; struct thermal_cooling_device *cdev; long state, max_state; - if (!tz->ops->get_trend || - tz->ops->get_trend(tz, trip, (enum thermal_trend *)&trend)) { + if (!tz->ops->get_trend || tz->ops->get_trend(tz, trip, &trend)) { /* * compare the current temperature and previous temperature * to get the thermal trend, if no special requirement @@ -747,11 +743,8 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz, if (temp >= trip_temp) { tz->passive = true; - trend = (tz->tc1 * (temp - tz->last_temperature)) + - (tz->tc2 * (temp - trip_temp)); - /* Heating up? */ - if (trend > 0) { + if (trend == THERMAL_TREND_RAISING) { list_for_each_entry(instance, &tz->cooling_devices, node) { if (instance->trip != trip) @@ -762,7 +755,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz, if (state++ < max_state) cdev->ops->set_cur_state(cdev, state); } - } else if (trend < 0) { /* Cooling off? */ + } else if (trend == THERMAL_TREND_DROPPING) { /* Cooling off? */ list_for_each_entry(instance, &tz->cooling_devices, node) { if (instance->trip != trip) @@ -1288,8 +1281,6 @@ static void remove_trip_attrs(struct thermal_zone_device *tz) * @mask: a bit string indicating the writeablility of trip points * @devdata: private device data * @ops: standard thermal zone device callbacks - * @tc1: thermal coefficient 1 for passive calculations - * @tc2: thermal coefficient 2 for passive calculations * @passive_delay: number of milliseconds to wait between polls when * performing passive cooling * @polling_delay: number of milliseconds to wait between polls when checking @@ -1297,13 +1288,12 @@ static void remove_trip_attrs(struct thermal_zone_device *tz) * driven systems) * * thermal_zone_device_unregister() must be called when the device is no - * longer needed. The passive cooling formula uses tc1 and tc2 as described in - * section 11.1.5.1 of the ACPI specification 3.0. + * longer needed. The passive cooling depends on the .get_trend() return value. */ struct thermal_zone_device *thermal_zone_device_register(const char *type, int trips, int mask, void *devdata, const struct thermal_zone_device_ops *ops, - int tc1, int tc2, int passive_delay, int polling_delay) + int passive_delay, int polling_delay) { struct thermal_zone_device *tz; struct thermal_cooling_device *pos; @@ -1339,8 +1329,6 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, tz->device.class = &thermal_class; tz->devdata = devdata; tz->trips = trips; - tz->tc1 = tc1; - tz->tc2 = tc2; tz->passive_delay = passive_delay; tz->polling_delay = polling_delay; diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 6a1d43d2ec92..38267a595d69 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -115,8 +115,6 @@ struct thermal_zone_device { struct thermal_attr *trip_hyst_attrs; void *devdata; int trips; - int tc1; - int tc2; int passive_delay; int polling_delay; int temperature; @@ -163,8 +161,7 @@ enum { #define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1) struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, - void *, const struct thermal_zone_device_ops *, int tc1, - int tc2, int passive_freq, int polling_freq); + void *, const struct thermal_zone_device_ops *, int, int); void thermal_zone_device_unregister(struct thermal_zone_device *); int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, From 4ae46befb49d4173122e0afa995c4e93d01948a2 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 27 Jun 2012 10:05:39 +0800 Subject: [PATCH 06/30] Thermal: Introduce thermal_zone_trip_update() This function is used to update the cooling state of all the cooling devices that are bound to an active trip point. This will be used for passive cooling as well, in the future patches. as both active and passive cooling can share the same algorithm, which is 1. if the temperature is higher than a trip point, a. if the trend is THERMAL_TREND_RAISING, use higher cooling state for this trip point b. if the trend is THERMAL_TREND_DROPPING, use lower cooling state for this trip point 2. if the temperature is lower than a trip point, use lower cooling state for this trip point. Signed-off-by: Zhang Rui Reviewed-by: Rafael J. Wysocki Reviewed-by: Eduardo Valentin --- drivers/acpi/thermal.c | 8 ++- drivers/thermal/thermal_sys.c | 102 +++++++++++++++++++++++++--------- 2 files changed, 81 insertions(+), 29 deletions(-) diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 07cb2172bd09..bd66bd28a43f 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -716,9 +716,11 @@ static int thermal_get_trend(struct thermal_zone_device *thermal, if (thermal_get_trip_type(thermal, trip, &type)) return -EINVAL; - /* Only PASSIVE trip points need TREND */ - if (type != THERMAL_TRIP_PASSIVE) - return -EINVAL; + if (type == THERMAL_TRIP_ACTIVE) { + /* aggressive active cooling */ + *trend = THERMAL_TREND_RAISING; + return 0; + } /* * tz->temperature has already been updated by generic thermal layer, diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 0cf3dce55462..735e6e6daada 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -1076,6 +1076,81 @@ void thermal_cooling_device_unregister(struct } EXPORT_SYMBOL(thermal_cooling_device_unregister); +/* + * Cooling algorithm for active trip points + * + * 1. if the temperature is higher than a trip point, + * a. if the trend is THERMAL_TREND_RAISING, use higher cooling + * state for this trip point + * b. if the trend is THERMAL_TREND_DROPPING, use lower cooling + * state for this trip point + * + * 2. if the temperature is lower than a trip point, use lower + * cooling state for this trip point + * + * Note that this behaves the same as the previous passive cooling + * algorithm. + */ + +static void thermal_zone_trip_update(struct thermal_zone_device *tz, + int trip, long temp) +{ + struct thermal_cooling_device_instance *instance; + struct thermal_cooling_device *cdev = NULL; + unsigned long cur_state, max_state; + long trip_temp; + enum thermal_trend trend; + + tz->ops->get_trip_temp(tz, trip, &trip_temp); + + if (!tz->ops->get_trend || tz->ops->get_trend(tz, trip, &trend)) { + /* + * compare the current temperature and previous temperature + * to get the thermal trend, if no special requirement + */ + if (tz->temperature > tz->last_temperature) + trend = THERMAL_TREND_RAISING; + else if (tz->temperature < tz->last_temperature) + trend = THERMAL_TREND_DROPPING; + else + trend = THERMAL_TREND_STABLE; + } + + if (temp >= trip_temp) { + list_for_each_entry(instance, &tz->cooling_devices, node) { + if (instance->trip != trip) + continue; + + cdev = instance->cdev; + + cdev->ops->get_cur_state(cdev, &cur_state); + cdev->ops->get_max_state(cdev, &max_state); + + if (trend == THERMAL_TREND_RAISING) { + cur_state = cur_state < instance->upper ? + (cur_state + 1) : instance->upper; + } else if (trend == THERMAL_TREND_DROPPING) { + cur_state = cur_state > instance->lower ? + (cur_state - 1) : instance->lower; + } + cdev->ops->set_cur_state(cdev, cur_state); + } + } else { /* below trip */ + list_for_each_entry(instance, &tz->cooling_devices, node) { + if (instance->trip != trip) + continue; + + cdev = instance->cdev; + cdev->ops->get_cur_state(cdev, &cur_state); + + cur_state = cur_state > instance->lower ? + (cur_state - 1) : instance->lower; + cdev->ops->set_cur_state(cdev, cur_state); + } + } + + return; +} /** * thermal_zone_device_update - force an update of a thermal zone's state * @ttz: the thermal zone to update @@ -1086,9 +1161,6 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) int count, ret = 0; long temp, trip_temp; enum thermal_trip_type trip_type; - struct thermal_cooling_device_instance *instance; - struct thermal_cooling_device *cdev; - unsigned long cur_state, max_state; mutex_lock(&tz->lock); @@ -1124,29 +1196,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) tz->ops->notify(tz, count, trip_type); break; case THERMAL_TRIP_ACTIVE: - list_for_each_entry(instance, &tz->cooling_devices, - node) { - if (instance->trip != count) - continue; - - cdev = instance->cdev; - - cdev->ops->get_cur_state(cdev, &cur_state); - cdev->ops->get_max_state(cdev, &max_state); - - if (temp >= trip_temp) - cur_state = - cur_state < instance->upper ? - (cur_state + 1) : - instance->upper; - else - cur_state = - cur_state > instance->lower ? - (cur_state - 1) : - instance->lower; - - cdev->ops->set_cur_state(cdev, cur_state); - } + thermal_zone_trip_update(tz, count, temp); break; case THERMAL_TRIP_PASSIVE: if (temp >= trip_temp || tz->passive) From b81b6ba3d9ac5feb14388bb73ac5a39d9a7540dc Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 27 Jun 2012 10:08:19 +0800 Subject: [PATCH 07/30] Thermal: rename structure thermal_cooling_device_instance to thermal_instance This struct is used to describe the behavior for a thermal cooling device on a certain trip point for a certain thremal zone. thermal_cooling_device_instance is not accurate, as a cooling device can be used for more than one trip point in one thermal zone device. Signed-off-by: Zhang Rui Reviewed-by: Rafael J. Wysocki Reviewed-by: Eduardo Valentin --- drivers/thermal/thermal_sys.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 735e6e6daada..3eba3971dae1 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -46,7 +46,7 @@ MODULE_LICENSE("GPL"); * a certain cooling device on a certain trip point * in a certain thermal zone */ -struct thermal_cooling_device_instance { +struct thermal_instance { int id; char name[THERMAL_NAME_LENGTH]; struct thermal_zone_device *tz; @@ -430,10 +430,10 @@ static ssize_t thermal_cooling_device_trip_point_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct thermal_cooling_device_instance *instance; + struct thermal_instance *instance; instance = - container_of(attr, struct thermal_cooling_device_instance, attr); + container_of(attr, struct thermal_instance, attr); if (instance->trip == THERMAL_TRIPS_NONE) return sprintf(buf, "-1\n"); @@ -716,7 +716,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz, int temp, int trip_temp, int trip) { enum thermal_trend trend; - struct thermal_cooling_device_instance *instance; + struct thermal_instance *instance; struct thermal_cooling_device *cdev; long state, max_state; @@ -812,8 +812,8 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, struct thermal_cooling_device *cdev, unsigned long upper, unsigned long lower) { - struct thermal_cooling_device_instance *dev; - struct thermal_cooling_device_instance *pos; + struct thermal_instance *dev; + struct thermal_instance *pos; struct thermal_zone_device *pos1; struct thermal_cooling_device *pos2; unsigned long max_state; @@ -844,7 +844,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, return -EINVAL; dev = - kzalloc(sizeof(struct thermal_cooling_device_instance), GFP_KERNEL); + kzalloc(sizeof(struct thermal_instance), GFP_KERNEL); if (!dev) return -ENOMEM; dev->tz = tz; @@ -909,7 +909,7 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, int trip, struct thermal_cooling_device *cdev) { - struct thermal_cooling_device_instance *pos, *next; + struct thermal_instance *pos, *next; mutex_lock(&tz->lock); list_for_each_entry_safe(pos, next, &tz->cooling_devices, node) { @@ -1095,7 +1095,7 @@ EXPORT_SYMBOL(thermal_cooling_device_unregister); static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip, long temp) { - struct thermal_cooling_device_instance *instance; + struct thermal_instance *instance; struct thermal_cooling_device *cdev = NULL; unsigned long cur_state, max_state; long trip_temp; From 2d374139d5b0b596cfbd892bf3ec7dacb3049904 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 27 Jun 2012 10:09:00 +0800 Subject: [PATCH 08/30] Thermal: Rename thermal_zone_device.cooling_devices Rename thermal_zone_device.cooling_devices to thermal_zone_device.thermal_instances thermal_zone_device.cooling_devices is not accurate as this is a list for thermal instances, rather than cooling devices. Signed-off-by: Zhang Rui Reviewed-by: Rafael J. Wysocki Reviewed-by: Eduardo Valentin --- drivers/thermal/thermal_sys.c | 18 +++++++++--------- include/linux/thermal.h | 4 ++-- 2 files changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 3eba3971dae1..797d14891127 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -745,7 +745,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz, /* Heating up? */ if (trend == THERMAL_TREND_RAISING) { - list_for_each_entry(instance, &tz->cooling_devices, + list_for_each_entry(instance, &tz->thermal_instances, node) { if (instance->trip != trip) continue; @@ -756,7 +756,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz, cdev->ops->set_cur_state(cdev, state); } } else if (trend == THERMAL_TREND_DROPPING) { /* Cooling off? */ - list_for_each_entry(instance, &tz->cooling_devices, + list_for_each_entry(instance, &tz->thermal_instances, node) { if (instance->trip != trip) continue; @@ -777,7 +777,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz, * and avoid thrashing around the passive trip point. Note that we * assume symmetry. */ - list_for_each_entry(instance, &tz->cooling_devices, node) { + list_for_each_entry(instance, &tz->thermal_instances, node) { if (instance->trip != trip) continue; cdev = instance->cdev; @@ -873,13 +873,13 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, goto remove_symbol_link; mutex_lock(&tz->lock); - list_for_each_entry(pos, &tz->cooling_devices, node) + list_for_each_entry(pos, &tz->thermal_instances, node) if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { result = -EEXIST; break; } if (!result) - list_add_tail(&dev->node, &tz->cooling_devices); + list_add_tail(&dev->node, &tz->thermal_instances); mutex_unlock(&tz->lock); if (!result) @@ -912,7 +912,7 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, struct thermal_instance *pos, *next; mutex_lock(&tz->lock); - list_for_each_entry_safe(pos, next, &tz->cooling_devices, node) { + list_for_each_entry_safe(pos, next, &tz->thermal_instances, node) { if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { list_del(&pos->node); mutex_unlock(&tz->lock); @@ -1117,7 +1117,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, } if (temp >= trip_temp) { - list_for_each_entry(instance, &tz->cooling_devices, node) { + list_for_each_entry(instance, &tz->thermal_instances, node) { if (instance->trip != trip) continue; @@ -1136,7 +1136,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, cdev->ops->set_cur_state(cdev, cur_state); } } else { /* below trip */ - list_for_each_entry(instance, &tz->cooling_devices, node) { + list_for_each_entry(instance, &tz->thermal_instances, node) { if (instance->trip != trip) continue; @@ -1365,7 +1365,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, if (!tz) return ERR_PTR(-ENOMEM); - INIT_LIST_HEAD(&tz->cooling_devices); + INIT_LIST_HEAD(&tz->thermal_instances); idr_init(&tz->idr); mutex_init(&tz->lock); result = get_idr(&thermal_tz_idr, &thermal_idr_lock, &tz->id); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 38267a595d69..cb0b0e3ffd97 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -122,9 +122,9 @@ struct thermal_zone_device { bool passive; unsigned int forced_passive; const struct thermal_zone_device_ops *ops; - struct list_head cooling_devices; + struct list_head thermal_instances; struct idr idr; - struct mutex lock; /* protect cooling devices list */ + struct mutex lock; /* protect thermal_instances list */ struct list_head node; struct delayed_work poll_queue; }; From cddf31b3b293fd20358ea506f22445611425811f Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 27 Jun 2012 10:09:36 +0800 Subject: [PATCH 09/30] Thermal: Rename thermal_instance.node to thermal_instance.tz_node. thermal_instance should be referenced by both thermal zone devices and thermal cooling devices. Rename thermal_instance.node to thermal_instance.tz_node in this patch and thermal_instanace.cdev_node will be introduced in next patch. Signed-off-by: Zhang Rui Reviewed-by: Rafael J. Wysocki Reviewed-by: Eduardo Valentin --- drivers/thermal/thermal_sys.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 797d14891127..288437651da5 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -56,7 +56,7 @@ struct thermal_instance { unsigned long lower; /* Lowest cooling state for this trip point */ char attr_name[THERMAL_NAME_LENGTH]; struct device_attribute attr; - struct list_head node; + struct list_head tz_node; /* node in tz->thermal_instances */ }; static DEFINE_IDR(thermal_tz_idr); @@ -746,7 +746,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz, /* Heating up? */ if (trend == THERMAL_TREND_RAISING) { list_for_each_entry(instance, &tz->thermal_instances, - node) { + tz_node) { if (instance->trip != trip) continue; cdev = instance->cdev; @@ -757,7 +757,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz, } } else if (trend == THERMAL_TREND_DROPPING) { /* Cooling off? */ list_for_each_entry(instance, &tz->thermal_instances, - node) { + tz_node) { if (instance->trip != trip) continue; cdev = instance->cdev; @@ -777,7 +777,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz, * and avoid thrashing around the passive trip point. Note that we * assume symmetry. */ - list_for_each_entry(instance, &tz->thermal_instances, node) { + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { if (instance->trip != trip) continue; cdev = instance->cdev; @@ -873,13 +873,13 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, goto remove_symbol_link; mutex_lock(&tz->lock); - list_for_each_entry(pos, &tz->thermal_instances, node) + list_for_each_entry(pos, &tz->thermal_instances, tz_node) if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { result = -EEXIST; break; } if (!result) - list_add_tail(&dev->node, &tz->thermal_instances); + list_add_tail(&dev->tz_node, &tz->thermal_instances); mutex_unlock(&tz->lock); if (!result) @@ -912,9 +912,9 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, struct thermal_instance *pos, *next; mutex_lock(&tz->lock); - list_for_each_entry_safe(pos, next, &tz->thermal_instances, node) { + list_for_each_entry_safe(pos, next, &tz->thermal_instances, tz_node) { if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { - list_del(&pos->node); + list_del(&pos->tz_node); mutex_unlock(&tz->lock); goto unbind; } @@ -1117,7 +1117,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, } if (temp >= trip_temp) { - list_for_each_entry(instance, &tz->thermal_instances, node) { + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { if (instance->trip != trip) continue; @@ -1136,7 +1136,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, cdev->ops->set_cur_state(cdev, cur_state); } } else { /* below trip */ - list_for_each_entry(instance, &tz->thermal_instances, node) { + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { if (instance->trip != trip) continue; From b5e4ae620b06274981781aeadc2aea50b507f7fb Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 27 Jun 2012 14:11:52 +0800 Subject: [PATCH 10/30] Thermal: List thermal_instance in thermal_cooling_device. List thermal_instance in thermal_cooling_device so that cooling device can know the cooling state requirement of all the thermal instances. Signed-off-by: Zhang Rui Reviewed-by: Rafael J. Wysocki Reviewed-by: Eduardo Valentin --- drivers/thermal/thermal_sys.c | 7 ++++++- include/linux/thermal.h | 1 + 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 288437651da5..70045c12d7df 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -57,6 +57,7 @@ struct thermal_instance { char attr_name[THERMAL_NAME_LENGTH]; struct device_attribute attr; struct list_head tz_node; /* node in tz->thermal_instances */ + struct list_head cdev_node; /* node in cdev->thermal_instances */ }; static DEFINE_IDR(thermal_tz_idr); @@ -878,8 +879,10 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, result = -EEXIST; break; } - if (!result) + if (!result) { list_add_tail(&dev->tz_node, &tz->thermal_instances); + list_add_tail(&dev->cdev_node, &cdev->thermal_instances); + } mutex_unlock(&tz->lock); if (!result) @@ -915,6 +918,7 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, list_for_each_entry_safe(pos, next, &tz->thermal_instances, tz_node) { if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { list_del(&pos->tz_node); + list_del(&pos->cdev_node); mutex_unlock(&tz->lock); goto unbind; } @@ -984,6 +988,7 @@ thermal_cooling_device_register(char *type, void *devdata, } strcpy(cdev->type, type); + INIT_LIST_HEAD(&cdev->thermal_instances); cdev->ops = ops; cdev->device.class = &thermal_class; cdev->devdata = devdata; diff --git a/include/linux/thermal.h b/include/linux/thermal.h index cb0b0e3ffd97..9ae378a4a555 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -94,6 +94,7 @@ struct thermal_cooling_device { struct device device; void *devdata; const struct thermal_cooling_device_ops *ops; + struct list_head thermal_instances; struct list_head node; }; From ce119f83257aae29b84a5bfad0669e8348437b18 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 27 Jun 2012 14:13:04 +0800 Subject: [PATCH 11/30] Thermal: Introduce simple arbitrator for setting device cooling state This fixes the problem that a cooling device may be referenced by by multiple trip points in multiple thermal zones. With this patch, we have two stages for updating a thermal zone, 1. check if a thermal_instance needs to be updated or not 2. update the cooling device, based on the target cooling state of all its instances. Note that, currently, the cooling device is set to the deepest cooling state required. Signed-off-by: Zhang Rui Reviewed-by: Rafael J. Wysocki Reviewed-by: Eduardo Valentin --- drivers/thermal/thermal_sys.c | 44 ++++++++++++++++++++++++++++++++--- include/linux/thermal.h | 1 + 2 files changed, 42 insertions(+), 3 deletions(-) diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 70045c12d7df..36ae2f43ee2e 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -41,6 +41,7 @@ MODULE_AUTHOR("Zhang Rui"); MODULE_DESCRIPTION("Generic thermal management sysfs support"); MODULE_LICENSE("GPL"); +#define THERMAL_NO_TARGET -1UL /* * This structure is used to describe the behavior of * a certain cooling device on a certain trip point @@ -54,6 +55,7 @@ struct thermal_instance { int trip; unsigned long upper; /* Highest cooling state for this trip point */ unsigned long lower; /* Lowest cooling state for this trip point */ + unsigned long target; /* expected cooling state */ char attr_name[THERMAL_NAME_LENGTH]; struct device_attribute attr; struct list_head tz_node; /* node in tz->thermal_instances */ @@ -853,6 +855,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, dev->trip = trip; dev->upper = upper; dev->lower = lower; + dev->target = THERMAL_NO_TARGET; result = get_idr(&tz->idr, &tz->lock, &dev->id); if (result) @@ -990,6 +993,7 @@ thermal_cooling_device_register(char *type, void *devdata, strcpy(cdev->type, type); INIT_LIST_HEAD(&cdev->thermal_instances); cdev->ops = ops; + cdev->updated = true; cdev->device.class = &thermal_class; cdev->devdata = devdata; dev_set_name(&cdev->device, "cooling_device%d", cdev->id); @@ -1081,6 +1085,34 @@ void thermal_cooling_device_unregister(struct } EXPORT_SYMBOL(thermal_cooling_device_unregister); +static void thermal_cdev_do_update(struct thermal_cooling_device *cdev) +{ + struct thermal_instance *instance; + unsigned long target = 0; + + /* cooling device is updated*/ + if (cdev->updated) + return; + + /* Make sure cdev enters the deepest cooling state */ + list_for_each_entry(instance, &cdev->thermal_instances, cdev_node) { + if (instance->target == THERMAL_NO_TARGET) + continue; + if (instance->target > target) + target = instance->target; + } + cdev->ops->set_cur_state(cdev, target); + cdev->updated = true; +} + +static void thermal_zone_do_update(struct thermal_zone_device *tz) +{ + struct thermal_instance *instance; + + list_for_each_entry(instance, &tz->thermal_instances, tz_node) + thermal_cdev_do_update(instance->cdev); +} + /* * Cooling algorithm for active trip points * @@ -1138,19 +1170,24 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, cur_state = cur_state > instance->lower ? (cur_state - 1) : instance->lower; } - cdev->ops->set_cur_state(cdev, cur_state); + instance->target = cur_state; + cdev->updated = false; /* cooling device needs update */ } } else { /* below trip */ list_for_each_entry(instance, &tz->thermal_instances, tz_node) { if (instance->trip != trip) continue; + /* Do not use the inactive thermal instance */ + if (instance->target == THERMAL_NO_TARGET) + continue; cdev = instance->cdev; cdev->ops->get_cur_state(cdev, &cur_state); cur_state = cur_state > instance->lower ? - (cur_state - 1) : instance->lower; - cdev->ops->set_cur_state(cdev, cur_state); + (cur_state - 1) : THERMAL_NO_TARGET; + instance->target = cur_state; + cdev->updated = false; /* cooling device needs update */ } } @@ -1211,6 +1248,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) } } + thermal_zone_do_update(tz); if (tz->forced_passive) thermal_zone_device_passive(tz, temp, tz->forced_passive, THERMAL_TRIPS_NONE); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 9ae378a4a555..de0515a96f9f 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -94,6 +94,7 @@ struct thermal_cooling_device { struct device device; void *devdata; const struct thermal_cooling_device_ops *ops; + bool updated; /* true if the cooling device does not need update */ struct list_head thermal_instances; struct list_head node; }; From 908b9fb792b77663a007af240e7ee89460de2025 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 27 Jun 2012 14:14:05 +0800 Subject: [PATCH 12/30] Thermal: Unify the code for both active and passive cooling Remove thermal_zone_device_passive(). And use thermal_zone_trip_update() and thermal_zone_do_update() for both active and passive cooling. Signed-off-by: Zhang Rui Reviewed-by: Rafael J. Wysocki Reviewed-by: Eduardo Valentin --- drivers/thermal/thermal_sys.c | 110 ++++++++-------------------------- include/linux/thermal.h | 2 +- 2 files changed, 26 insertions(+), 86 deletions(-) diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 36ae2f43ee2e..6e9d3dc9d89b 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -715,84 +715,6 @@ static void thermal_zone_device_set_polling(struct thermal_zone_device *tz, msecs_to_jiffies(delay)); } -static void thermal_zone_device_passive(struct thermal_zone_device *tz, - int temp, int trip_temp, int trip) -{ - enum thermal_trend trend; - struct thermal_instance *instance; - struct thermal_cooling_device *cdev; - long state, max_state; - - if (!tz->ops->get_trend || tz->ops->get_trend(tz, trip, &trend)) { - /* - * compare the current temperature and previous temperature - * to get the thermal trend, if no special requirement - */ - if (tz->temperature > tz->last_temperature) - trend = THERMAL_TREND_RAISING; - else if (tz->temperature < tz->last_temperature) - trend = THERMAL_TREND_DROPPING; - else - trend = THERMAL_TREND_STABLE; - } - - /* - * Above Trip? - * ----------- - * Calculate the thermal trend (using the passive cooling equation) - * and modify the performance limit for all passive cooling devices - * accordingly. Note that we assume symmetry. - */ - if (temp >= trip_temp) { - tz->passive = true; - - /* Heating up? */ - if (trend == THERMAL_TREND_RAISING) { - list_for_each_entry(instance, &tz->thermal_instances, - tz_node) { - if (instance->trip != trip) - continue; - cdev = instance->cdev; - cdev->ops->get_cur_state(cdev, &state); - cdev->ops->get_max_state(cdev, &max_state); - if (state++ < max_state) - cdev->ops->set_cur_state(cdev, state); - } - } else if (trend == THERMAL_TREND_DROPPING) { /* Cooling off? */ - list_for_each_entry(instance, &tz->thermal_instances, - tz_node) { - if (instance->trip != trip) - continue; - cdev = instance->cdev; - cdev->ops->get_cur_state(cdev, &state); - cdev->ops->get_max_state(cdev, &max_state); - if (state > 0) - cdev->ops->set_cur_state(cdev, --state); - } - } - return; - } - - /* - * Below Trip? - * ----------- - * Implement passive cooling hysteresis to slowly increase performance - * and avoid thrashing around the passive trip point. Note that we - * assume symmetry. - */ - list_for_each_entry(instance, &tz->thermal_instances, tz_node) { - if (instance->trip != trip) - continue; - cdev = instance->cdev; - cdev->ops->get_cur_state(cdev, &state); - cdev->ops->get_max_state(cdev, &max_state); - if (state > 0) - cdev->ops->set_cur_state(cdev, --state); - if (state == 0) - tz->passive = false; - } -} - static void thermal_zone_device_check(struct work_struct *work) { struct thermal_zone_device *tz = container_of(work, struct @@ -1114,7 +1036,7 @@ static void thermal_zone_do_update(struct thermal_zone_device *tz) } /* - * Cooling algorithm for active trip points + * Cooling algorithm for both active and passive cooling * * 1. if the temperature is higher than a trip point, * a. if the trend is THERMAL_TREND_RAISING, use higher cooling @@ -1136,9 +1058,16 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, struct thermal_cooling_device *cdev = NULL; unsigned long cur_state, max_state; long trip_temp; + enum thermal_trip_type trip_type; enum thermal_trend trend; - tz->ops->get_trip_temp(tz, trip, &trip_temp); + if (trip == THERMAL_TRIPS_NONE) { + trip_temp = tz->forced_passive; + trip_type = THERMAL_TRIPS_NONE; + } else { + tz->ops->get_trip_temp(tz, trip, &trip_temp); + tz->ops->get_trip_type(tz, trip, &trip_type); + } if (!tz->ops->get_trend || tz->ops->get_trend(tz, trip, &trend)) { /* @@ -1170,6 +1099,13 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, cur_state = cur_state > instance->lower ? (cur_state - 1) : instance->lower; } + + /* activate a passive thermal instance */ + if ((trip_type == THERMAL_TRIP_PASSIVE || + trip_type == THERMAL_TRIPS_NONE) && + instance->target == THERMAL_NO_TARGET) + tz->passive++; + instance->target = cur_state; cdev->updated = false; /* cooling device needs update */ } @@ -1186,6 +1122,12 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, cur_state = cur_state > instance->lower ? (cur_state - 1) : THERMAL_NO_TARGET; + + /* deactivate a passive thermal instance */ + if ((trip_type == THERMAL_TRIP_PASSIVE || + trip_type == THERMAL_TRIPS_NONE) && + cur_state == THERMAL_NO_TARGET) + tz->passive--; instance->target = cur_state; cdev->updated = false; /* cooling device needs update */ } @@ -1242,16 +1184,14 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) break; case THERMAL_TRIP_PASSIVE: if (temp >= trip_temp || tz->passive) - thermal_zone_device_passive(tz, temp, - trip_temp, count); + thermal_zone_trip_update(tz, count, temp); break; } } - thermal_zone_do_update(tz); if (tz->forced_passive) - thermal_zone_device_passive(tz, temp, tz->forced_passive, - THERMAL_TRIPS_NONE); + thermal_zone_trip_update(tz, THERMAL_TRIPS_NONE, temp); + thermal_zone_do_update(tz); leave: if (tz->passive) diff --git a/include/linux/thermal.h b/include/linux/thermal.h index de0515a96f9f..76d0fe88eb1c 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -121,7 +121,7 @@ struct thermal_zone_device { int polling_delay; int temperature; int last_temperature; - bool passive; + int passive; unsigned int forced_passive; const struct thermal_zone_device_ops *ops; struct list_head thermal_instances; From f4a821ce6ed41970d0155f55067fb07009974fbe Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 24 Jul 2012 16:56:21 +0800 Subject: [PATCH 13/30] Thermal: Introduce locking for cdev.thermal_instances list. we need to go over all the thermal_instance list of a cooling device to decide which cooling state to put the cooling device to. But at this time, as a cooling device may be referenced in multiple thermal zones, we need to lock the list first in case another thermal zone is updating this cooling device. Signed-off-by: Zhang Rui Reviewed-by: Rafael J. Wysocki Reviewed-by: Eduardo Valentin --- drivers/thermal/thermal_sys.c | 8 ++++++++ include/linux/thermal.h | 1 + 2 files changed, 9 insertions(+) diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 6e9d3dc9d89b..5be8728c88a3 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -799,6 +799,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, goto remove_symbol_link; mutex_lock(&tz->lock); + mutex_lock(&cdev->lock); list_for_each_entry(pos, &tz->thermal_instances, tz_node) if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { result = -EEXIST; @@ -808,6 +809,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, list_add_tail(&dev->tz_node, &tz->thermal_instances); list_add_tail(&dev->cdev_node, &cdev->thermal_instances); } + mutex_unlock(&cdev->lock); mutex_unlock(&tz->lock); if (!result) @@ -840,14 +842,17 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, struct thermal_instance *pos, *next; mutex_lock(&tz->lock); + mutex_lock(&cdev->lock); list_for_each_entry_safe(pos, next, &tz->thermal_instances, tz_node) { if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { list_del(&pos->tz_node); list_del(&pos->cdev_node); + mutex_unlock(&cdev->lock); mutex_unlock(&tz->lock); goto unbind; } } + mutex_unlock(&cdev->lock); mutex_unlock(&tz->lock); return -ENODEV; @@ -913,6 +918,7 @@ thermal_cooling_device_register(char *type, void *devdata, } strcpy(cdev->type, type); + mutex_init(&cdev->lock); INIT_LIST_HEAD(&cdev->thermal_instances); cdev->ops = ops; cdev->updated = true; @@ -1016,6 +1022,7 @@ static void thermal_cdev_do_update(struct thermal_cooling_device *cdev) if (cdev->updated) return; + mutex_lock(&cdev->lock); /* Make sure cdev enters the deepest cooling state */ list_for_each_entry(instance, &cdev->thermal_instances, cdev_node) { if (instance->target == THERMAL_NO_TARGET) @@ -1023,6 +1030,7 @@ static void thermal_cdev_do_update(struct thermal_cooling_device *cdev) if (instance->target > target) target = instance->target; } + mutex_unlock(&cdev->lock); cdev->ops->set_cur_state(cdev, target); cdev->updated = true; } diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 76d0fe88eb1c..91b34812cd84 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -95,6 +95,7 @@ struct thermal_cooling_device { void *devdata; const struct thermal_cooling_device_ops *ops; bool updated; /* true if the cooling device does not need update */ + struct mutex lock; /* protect thermal_instances list */ struct list_head thermal_instances; struct list_head node; }; From 79a49168b595f5400ed3108cd57e90f5bbe144ca Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 21 Jul 2012 10:53:48 +1000 Subject: [PATCH 14/30] thermal: fix potential out-of-bounds memory access temp_crit.name and temp_input.name have a length of 16 bytes. Using THERMAL_NAME_LENGTH (20) as length parameter for snprintf() may result in out-of-bounds memory accesses. Replace it with sizeof(). Addresses Coverity #115679 Signed-off-by: Guenter Roeck Cc: Len Brown Cc: "Brown, Len" Signed-off-by: Andrew Morton Signed-off-by: Zhang Rui --- drivers/thermal/thermal_sys.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 5be8728c88a3..36e6f4d4ec3b 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -598,7 +598,7 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) temp->tz = tz; hwmon->count++; - snprintf(temp->temp_input.name, THERMAL_NAME_LENGTH, + snprintf(temp->temp_input.name, sizeof(temp->temp_input.name), "temp%d_input", hwmon->count); temp->temp_input.attr.attr.name = temp->temp_input.name; temp->temp_input.attr.attr.mode = 0444; @@ -611,7 +611,8 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) if (tz->ops->get_crit_temp) { unsigned long temperature; if (!tz->ops->get_crit_temp(tz, &temperature)) { - snprintf(temp->temp_crit.name, THERMAL_NAME_LENGTH, + snprintf(temp->temp_crit.name, + sizeof(temp->temp_crit.name), "temp%d_crit", hwmon->count); temp->temp_crit.attr.attr.name = temp->temp_crit.name; temp->temp_crit.attr.attr.mode = 0444; From 1e426ffddf2f158367eb6c7b8eb563c814a43283 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sat, 21 Jul 2012 10:53:48 +1000 Subject: [PATCH 15/30] thermal: add Renesas R-Car thermal sensor support This patch add basic Renesas R-Car thermal sensor support. It was tested on R-Car H1 Marzen board. Signed-off-by: Kuninori Morimoto Cc: Len Brown Cc: Joe Perches Cc: Jean Delvare Cc: Guenter Roeck Cc: Magnus Damm Signed-off-by: Andrew Morton Signed-off-by: Zhang Rui --- drivers/thermal/Kconfig | 8 + drivers/thermal/Makefile | 3 +- drivers/thermal/rcar_thermal.c | 260 +++++++++++++++++++++++++++++++++ 3 files changed, 270 insertions(+), 1 deletion(-) create mode 100644 drivers/thermal/rcar_thermal.c diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 3ab2bd540b54..7dd8c34552e1 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -27,3 +27,11 @@ config SPEAR_THERMAL help Enable this to plug the SPEAr thermal sensor driver into the Linux thermal framework + +config RCAR_THERMAL + tristate "Renesas R-Car thermal driver" + depends on THERMAL + depends on ARCH_SHMOBILE + help + Enable this to plug the R-Car thermal sensor driver into the Linux + thermal framework diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index a9fff0bf4b14..fd9369aeb96f 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -3,4 +3,5 @@ # obj-$(CONFIG_THERMAL) += thermal_sys.o -obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o \ No newline at end of file +obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o +obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c new file mode 100644 index 000000000000..d4452716aaab --- /dev/null +++ b/drivers/thermal/rcar_thermal.c @@ -0,0 +1,260 @@ +/* + * R-Car THS/TSC thermal sensor driver + * + * Copyright (C) 2012 Renesas Solutions Corp. + * Kuninori Morimoto + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define THSCR 0x2c +#define THSSR 0x30 + +/* THSCR */ +#define CPTAP 0xf + +/* THSSR */ +#define CTEMP 0x3f + + +struct rcar_thermal_priv { + void __iomem *base; + struct device *dev; + spinlock_t lock; + u32 comp; +}; + +/* + * basic functions + */ +static u32 rcar_thermal_read(struct rcar_thermal_priv *priv, u32 reg) +{ + unsigned long flags; + u32 ret; + + spin_lock_irqsave(&priv->lock, flags); + + ret = ioread32(priv->base + reg); + + spin_unlock_irqrestore(&priv->lock, flags); + + return ret; +} + +#if 0 /* no user at this point */ +static void rcar_thermal_write(struct rcar_thermal_priv *priv, + u32 reg, u32 data) +{ + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + + iowrite32(data, priv->base + reg); + + spin_unlock_irqrestore(&priv->lock, flags); +} +#endif + +static void rcar_thermal_bset(struct rcar_thermal_priv *priv, u32 reg, + u32 mask, u32 data) +{ + unsigned long flags; + u32 val; + + spin_lock_irqsave(&priv->lock, flags); + + val = ioread32(priv->base + reg); + val &= ~mask; + val |= (data & mask); + iowrite32(val, priv->base + reg); + + spin_unlock_irqrestore(&priv->lock, flags); +} + +/* + * zone device functions + */ +static int rcar_thermal_get_temp(struct thermal_zone_device *zone, + unsigned long *temp) +{ + struct rcar_thermal_priv *priv = zone->devdata; + int val, min, max, tmp; + + tmp = -200; /* default */ + while (1) { + if (priv->comp < 1 || priv->comp > 12) { + dev_err(priv->dev, + "THSSR invalid data (%d)\n", priv->comp); + priv->comp = 4; /* for next thermal */ + return -EINVAL; + } + + /* + * THS comparator offset and the reference temperature + * + * Comparator | reference | Temperature field + * offset | temperature | measurement + * | (degrees C) | (degrees C) + * -------------+---------------+------------------- + * 1 | -45 | -45 to -30 + * 2 | -30 | -30 to -15 + * 3 | -15 | -15 to 0 + * 4 | 0 | 0 to +15 + * 5 | +15 | +15 to +30 + * 6 | +30 | +30 to +45 + * 7 | +45 | +45 to +60 + * 8 | +60 | +60 to +75 + * 9 | +75 | +75 to +90 + * 10 | +90 | +90 to +105 + * 11 | +105 | +105 to +120 + * 12 | +120 | +120 to +135 + */ + + /* calculate thermal limitation */ + min = (priv->comp * 15) - 60; + max = min + 15; + + /* + * we need to wait 300us after changing comparator offset + * to get stable temperature. + * see "Usage Notes" on datasheet + */ + rcar_thermal_bset(priv, THSCR, CPTAP, priv->comp); + udelay(300); + + /* calculate current temperature */ + val = rcar_thermal_read(priv, THSSR) & CTEMP; + val = (val * 5) - 65; + + dev_dbg(priv->dev, "comp/min/max/val = %d/%d/%d/%d\n", + priv->comp, min, max, val); + + /* + * If val is same as min/max, then, + * it should try again on next comparator. + * But the val might be correct temperature. + * Keep it on "tmp" and compare with next val. + */ + if (tmp == val) + break; + + if (val <= min) { + tmp = min; + priv->comp--; /* try again */ + } else if (val >= max) { + tmp = max; + priv->comp++; /* try again */ + } else { + tmp = val; + break; + } + } + + *temp = tmp; + return 0; +} + +static struct thermal_zone_device_ops rcar_thermal_zone_ops = { + .get_temp = rcar_thermal_get_temp, +}; + +/* + * platform functions + */ +static int rcar_thermal_probe(struct platform_device *pdev) +{ + struct thermal_zone_device *zone; + struct rcar_thermal_priv *priv; + struct resource *res; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Could not get platform resource\n"); + return -ENODEV; + } + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(&pdev->dev, "Could not allocate priv\n"); + return -ENOMEM; + } + + priv->comp = 4; /* basic setup */ + priv->dev = &pdev->dev; + spin_lock_init(&priv->lock); + priv->base = devm_ioremap_nocache(&pdev->dev, + res->start, resource_size(res)); + if (!priv->base) { + dev_err(&pdev->dev, "Unable to ioremap thermal register\n"); + ret = -ENOMEM; + goto error_free_priv; + } + + zone = thermal_zone_device_register("rcar_thermal", 0, priv, + &rcar_thermal_zone_ops, 0, 0); + if (IS_ERR(zone)) { + dev_err(&pdev->dev, "thermal zone device is NULL\n"); + ret = PTR_ERR(zone); + goto error_iounmap; + } + + platform_set_drvdata(pdev, zone); + + dev_info(&pdev->dev, "proved\n"); + + return 0; + +error_iounmap: + devm_iounmap(&pdev->dev, priv->base); +error_free_priv: + devm_kfree(&pdev->dev, priv); + + return ret; +} + +static int rcar_thermal_remove(struct platform_device *pdev) +{ + struct thermal_zone_device *zone = platform_get_drvdata(pdev); + struct rcar_thermal_priv *priv = zone->devdata; + + thermal_zone_device_unregister(zone); + platform_set_drvdata(pdev, NULL); + + devm_iounmap(&pdev->dev, priv->base); + devm_kfree(&pdev->dev, priv); + + return 0; +} + +static struct platform_driver rcar_thermal_driver = { + .driver = { + .name = "rcar_thermal", + }, + .probe = rcar_thermal_probe, + .remove = rcar_thermal_remove, +}; +module_platform_driver(rcar_thermal_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("R-Car THS/TSC thermal sensor driver"); +MODULE_AUTHOR("Kuninori Morimoto "); From 204dd1d39c32f39a95bf7a7248f63b372fd137a6 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 7 Aug 2012 22:36:45 -0700 Subject: [PATCH 16/30] thermal: Fix potential NULL pointer accesses The type parameter in thermal_zone_device_register and thermal_cooling_device_register can be NULL, indicating that no sysfs attribute for the type should be created. Only call strlen() and strcpy() on type if it is not NULL. This patch addresses Coverity #102180 and #102182: Dereference before null check Signed-off-by: Guenter Roeck Signed-off-by: Zhang Rui --- drivers/thermal/thermal_sys.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 36e6f4d4ec3b..47498b871903 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -901,7 +901,7 @@ thermal_cooling_device_register(char *type, void *devdata, struct thermal_zone_device *pos; int result; - if (strlen(type) >= THERMAL_NAME_LENGTH) + if (type && strlen(type) >= THERMAL_NAME_LENGTH) return ERR_PTR(-EINVAL); if (!ops || !ops->get_max_state || !ops->get_cur_state || @@ -918,7 +918,7 @@ thermal_cooling_device_register(char *type, void *devdata, return ERR_PTR(result); } - strcpy(cdev->type, type); + strcpy(cdev->type, type ? : ""); mutex_init(&cdev->lock); INIT_LIST_HEAD(&cdev->thermal_instances); cdev->ops = ops; @@ -1344,7 +1344,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, int count; int passive = 0; - if (strlen(type) >= THERMAL_NAME_LENGTH) + if (type && strlen(type) >= THERMAL_NAME_LENGTH) return ERR_PTR(-EINVAL); if (trips > THERMAL_MAX_TRIPS || trips < 0 || mask >> trips) @@ -1366,7 +1366,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, return ERR_PTR(result); } - strcpy(tz->type, type); + strcpy(tz->type, type ? : ""); tz->ops = ops; tz->device.class = &thermal_class; tz->devdata = devdata; From a7a3b8c86f9fb8e8d13fb51a4a8b68166893b9b5 Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Thu, 23 Aug 2012 08:37:59 +0800 Subject: [PATCH 17/30] Fix a build error. Signed-off-by: Eduardo Valentin Signed-off-by: Zhang Rui --- drivers/staging/omap-thermal/omap-thermal-common.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/staging/omap-thermal/omap-thermal-common.c b/drivers/staging/omap-thermal/omap-thermal-common.c index d543d5c37152..b4cd6ccf4e2d 100644 --- a/drivers/staging/omap-thermal/omap-thermal-common.c +++ b/drivers/staging/omap-thermal/omap-thermal-common.c @@ -120,7 +120,9 @@ static int omap_thermal_bind(struct thermal_zone_device *thermal, /* TODO: bind with min and max states */ /* Simple thing, two trips, one passive another critical */ - return thermal_zone_bind_cooling_device(thermal, 0, cdev); + return thermal_zone_bind_cooling_device(thermal, 0, cdev, + THERMAL_NO_LIMIT, + THERMAL_NO_LIMIT); } /* Unbind callback functions for thermal zone */ From 023614183768a7ac62898bded5ec6c0c9fecbdd9 Mon Sep 17 00:00:00 2001 From: Amit Daniel Kachhap Date: Thu, 16 Aug 2012 17:11:40 +0530 Subject: [PATCH 18/30] thermal: add generic cpufreq cooling implementation This patchset introduces a new generic cooling device based on cpufreq that can be used on non-ACPI platforms. As a proof of concept, we have drivers for the following platforms using this mechanism now: * Samsung Exynos (Exynos4 and Exynos5) in the current patchset. * Freescale i.MX (git://git.linaro.org/people/amitdanielk/linux.git imx6q_thermal) There is a small change in cpufreq cooling registration APIs, so a minor change is needed for Freescale platforms. Brief Description: 1) The generic cooling devices code is placed inside driver/thermal/* as placing inside acpi folder will need un-necessary enabling of acpi code. This code is architecture independent. 2) This patchset adds generic cpu cooling low level implementation through frequency clipping. In future, other cpu related cooling devices may be added here. An ACPI version of this already exists (drivers/acpi/processor_thermal.c) .But this will be useful for platforms like ARM using the generic thermal interface along with the generic cpu cooling devices. The cooling device registration API's return cooling device pointers which can be easily binded with the thermal zone trip points. The important APIs exposed are, a) struct thermal_cooling_device *cpufreq_cooling_register( struct cpumask *clip_cpus) b) void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) 3) Samsung exynos platform thermal implementation is done using the generic cpu cooling APIs and the new trip type. The temperature sensor driver present in the hwmon folder(registered as hwmon driver) is moved to thermal folder and registered as a thermal driver. A simple data/control flow diagrams is shown below, Core Linux thermal <-----> Exynos thermal interface <----- Temperature Sensor | | \|/ | Cpufreq cooling device <--------------- TODO: *Will send the DT enablement patches later after the driver is merged. This patch: Add support for generic cpu thermal cooling low level implementations using frequency scaling up/down based on the registration parameters. Different cpu related cooling devices can be registered by the user and the binding of these cooling devices to the corresponding trip points can be easily done as the registration APIs return the cooling device pointer. The user of these APIs are responsible for passing clipping frequency . The drivers can also register to recieve notification about any cooling action called. [akpm@linux-foundation.org: fix comment layout] Signed-off-by: Amit Daniel Kachhap Cc: Guenter Roeck Cc: SangWook Ju Cc: Durgadoss Cc: Len Brown Cc: Jean Delvare Cc: Kyungmin Park Cc: Kukjin Kim Signed-off-by: Andrew Morton Signed-off-by: Amit Daniel Kachhap Signed-off-by: Zhang Rui --- Documentation/thermal/cpu-cooling-api.txt | 32 ++ drivers/thermal/Kconfig | 11 + drivers/thermal/Makefile | 1 + drivers/thermal/cpu_cooling.c | 450 ++++++++++++++++++++++ include/linux/cpu_cooling.h | 58 +++ 5 files changed, 552 insertions(+) create mode 100644 Documentation/thermal/cpu-cooling-api.txt create mode 100644 drivers/thermal/cpu_cooling.c create mode 100644 include/linux/cpu_cooling.h diff --git a/Documentation/thermal/cpu-cooling-api.txt b/Documentation/thermal/cpu-cooling-api.txt new file mode 100644 index 000000000000..fca24c931ec8 --- /dev/null +++ b/Documentation/thermal/cpu-cooling-api.txt @@ -0,0 +1,32 @@ +CPU cooling APIs How To +=================================== + +Written by Amit Daniel Kachhap + +Updated: 12 May 2012 + +Copyright (c) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com) + +0. Introduction + +The generic cpu cooling(freq clipping) provides registration/unregistration APIs +to the caller. The binding of the cooling devices to the trip point is left for +the user. The registration APIs returns the cooling device pointer. + +1. cpu cooling APIs + +1.1 cpufreq registration/unregistration APIs +1.1.1 struct thermal_cooling_device *cpufreq_cooling_register( + struct cpumask *clip_cpus) + + This interface function registers the cpufreq cooling device with the name + "thermal-cpufreq-%x". This api can support multiple instances of cpufreq + cooling devices. + + clip_cpus: cpumask of cpus where the frequency constraints will happen. + +1.1.2 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) + + This interface function unregisters the "thermal-cpufreq-%x" cooling device. + + cdev: Cooling device pointer which has to be unregistered. diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 7dd8c34552e1..996003b3438a 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -19,6 +19,17 @@ config THERMAL_HWMON depends on HWMON=y || HWMON=THERMAL default y +config CPU_THERMAL + bool "generic cpu cooling support" + depends on THERMAL && CPU_FREQ + help + This implements the generic cpu cooling mechanism through frequency + reduction, cpu hotplug and any other ways of reducing temperature. An + ACPI version of this already exists(drivers/acpi/processor_thermal.c). + This will be useful for platforms using the generic thermal interface + and not the ACPI interface. + If you want this support, you should say Y here. + config SPEAR_THERMAL bool "SPEAr thermal sensor driver" depends on THERMAL diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index fd9369aeb96f..aae59ad57c42 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -3,5 +3,6 @@ # obj-$(CONFIG_THERMAL) += thermal_sys.o +obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c new file mode 100644 index 000000000000..99a5d7551b33 --- /dev/null +++ b/drivers/thermal/cpu_cooling.c @@ -0,0 +1,450 @@ +/* + * linux/drivers/thermal/cpu_cooling.c + * + * Copyright (C) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com) + * Copyright (C) 2012 Amit Daniel + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/** + * struct cpufreq_cooling_device + * @id: unique integer value corresponding to each cpufreq_cooling_device + * registered. + * @cool_dev: thermal_cooling_device pointer to keep track of the the + * egistered cooling device. + * @cpufreq_state: integer value representing the current state of cpufreq + * cooling devices. + * @cpufreq_val: integer value representing the absolute value of the clipped + * frequency. + * @allowed_cpus: all the cpus involved for this cpufreq_cooling_device. + * @node: list_head to link all cpufreq_cooling_device together. + * + * This structure is required for keeping information of each + * cpufreq_cooling_device registered as a list whose head is represented by + * cooling_cpufreq_list. In order to prevent corruption of this list a + * mutex lock cooling_cpufreq_lock is used. + */ +struct cpufreq_cooling_device { + int id; + struct thermal_cooling_device *cool_dev; + unsigned int cpufreq_state; + unsigned int cpufreq_val; + struct cpumask allowed_cpus; + struct list_head node; +}; +static LIST_HEAD(cooling_cpufreq_list); +static DEFINE_IDR(cpufreq_idr); + +static struct mutex cooling_cpufreq_lock; + +/* notify_table passes value to the CPUFREQ_ADJUST callback function. */ +#define NOTIFY_INVALID NULL +struct cpufreq_cooling_device *notify_device; + +/** + * get_idr - function to get a unique id. + * @idr: struct idr * handle used to create a id. + * @id: int * value generated by this function. + */ +static int get_idr(struct idr *idr, int *id) +{ + int err; +again: + if (unlikely(idr_pre_get(idr, GFP_KERNEL) == 0)) + return -ENOMEM; + + mutex_lock(&cooling_cpufreq_lock); + err = idr_get_new(idr, NULL, id); + mutex_unlock(&cooling_cpufreq_lock); + + if (unlikely(err == -EAGAIN)) + goto again; + else if (unlikely(err)) + return err; + + *id = *id & MAX_ID_MASK; + return 0; +} + +/** + * release_idr - function to free the unique id. + * @idr: struct idr * handle used for creating the id. + * @id: int value representing the unique id. + */ +static void release_idr(struct idr *idr, int id) +{ + mutex_lock(&cooling_cpufreq_lock); + idr_remove(idr, id); + mutex_unlock(&cooling_cpufreq_lock); +} + +/* Below code defines functions to be used for cpufreq as cooling device */ + +/** + * is_cpufreq_valid - function to check if a cpu has frequency transition policy. + * @cpu: cpu for which check is needed. + */ +static int is_cpufreq_valid(int cpu) +{ + struct cpufreq_policy policy; + return !cpufreq_get_policy(&policy, cpu); +} + +/** + * get_cpu_frequency - get the absolute value of frequency from level. + * @cpu: cpu for which frequency is fetched. + * @level: level of frequency of the CPU + * e.g level=1 --> 1st MAX FREQ, LEVEL=2 ---> 2nd MAX FREQ, .... etc + */ +static unsigned int get_cpu_frequency(unsigned int cpu, unsigned long level) +{ + int ret = 0, i = 0; + unsigned long level_index; + bool descend = false; + struct cpufreq_frequency_table *table = + cpufreq_frequency_get_table(cpu); + if (!table) + return ret; + + while (table[i].frequency != CPUFREQ_TABLE_END) { + if (table[i].frequency == CPUFREQ_ENTRY_INVALID) + continue; + + /*check if table in ascending or descending order*/ + if ((table[i + 1].frequency != CPUFREQ_TABLE_END) && + (table[i + 1].frequency < table[i].frequency) + && !descend) { + descend = true; + } + + /*return if level matched and table in descending order*/ + if (descend && i == level) + return table[i].frequency; + i++; + } + i--; + + if (level > i || descend) + return ret; + level_index = i - level; + + /*Scan the table in reverse order and match the level*/ + while (i >= 0) { + if (table[i].frequency == CPUFREQ_ENTRY_INVALID) + continue; + /*return if level matched*/ + if (i == level_index) + return table[i].frequency; + i--; + } + return ret; +} + +/** + * cpufreq_apply_cooling - function to apply frequency clipping. + * @cpufreq_device: cpufreq_cooling_device pointer containing frequency + * clipping data. + * @cooling_state: value of the cooling state. + */ +static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device, + unsigned long cooling_state) +{ + unsigned int cpuid, clip_freq; + struct cpumask *maskPtr = &cpufreq_device->allowed_cpus; + unsigned int cpu = cpumask_any(maskPtr); + + + /* Check if the old cooling action is same as new cooling action */ + if (cpufreq_device->cpufreq_state == cooling_state) + return 0; + + clip_freq = get_cpu_frequency(cpu, cooling_state); + if (!clip_freq) + return -EINVAL; + + cpufreq_device->cpufreq_state = cooling_state; + cpufreq_device->cpufreq_val = clip_freq; + notify_device = cpufreq_device; + + for_each_cpu(cpuid, maskPtr) { + if (is_cpufreq_valid(cpuid)) + cpufreq_update_policy(cpuid); + } + + notify_device = NOTIFY_INVALID; + + return 0; +} + +/** + * cpufreq_thermal_notifier - notifier callback for cpufreq policy change. + * @nb: struct notifier_block * with callback info. + * @event: value showing cpufreq event for which this function invoked. + * @data: callback-specific data + */ +static int cpufreq_thermal_notifier(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct cpufreq_policy *policy = data; + unsigned long max_freq = 0; + + if (event != CPUFREQ_ADJUST || notify_device == NOTIFY_INVALID) + return 0; + + if (cpumask_test_cpu(policy->cpu, ¬ify_device->allowed_cpus)) + max_freq = notify_device->cpufreq_val; + + /* Never exceed user_policy.max*/ + if (max_freq > policy->user_policy.max) + max_freq = policy->user_policy.max; + + if (policy->max != max_freq) + cpufreq_verify_within_limits(policy, 0, max_freq); + + return 0; +} + +/* + * cpufreq cooling device callback functions are defined below + */ + +/** + * cpufreq_get_max_state - callback function to get the max cooling state. + * @cdev: thermal cooling device pointer. + * @state: fill this variable with the max cooling state. + */ +static int cpufreq_get_max_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + int ret = -EINVAL, i = 0; + struct cpufreq_cooling_device *cpufreq_device; + struct cpumask *maskPtr; + unsigned int cpu; + struct cpufreq_frequency_table *table; + + mutex_lock(&cooling_cpufreq_lock); + list_for_each_entry(cpufreq_device, &cooling_cpufreq_list, node) { + if (cpufreq_device && cpufreq_device->cool_dev == cdev) + break; + } + if (cpufreq_device == NULL) + goto return_get_max_state; + + maskPtr = &cpufreq_device->allowed_cpus; + cpu = cpumask_any(maskPtr); + table = cpufreq_frequency_get_table(cpu); + if (!table) { + *state = 0; + ret = 0; + goto return_get_max_state; + } + + while (table[i].frequency != CPUFREQ_TABLE_END) { + if (table[i].frequency == CPUFREQ_ENTRY_INVALID) + continue; + i++; + } + if (i > 0) { + *state = --i; + ret = 0; + } + +return_get_max_state: + mutex_unlock(&cooling_cpufreq_lock); + return ret; +} + +/** + * cpufreq_get_cur_state - callback function to get the current cooling state. + * @cdev: thermal cooling device pointer. + * @state: fill this variable with the current cooling state. + */ +static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + int ret = -EINVAL; + struct cpufreq_cooling_device *cpufreq_device; + + mutex_lock(&cooling_cpufreq_lock); + list_for_each_entry(cpufreq_device, &cooling_cpufreq_list, node) { + if (cpufreq_device && cpufreq_device->cool_dev == cdev) { + *state = cpufreq_device->cpufreq_state; + ret = 0; + break; + } + } + mutex_unlock(&cooling_cpufreq_lock); + + return ret; +} + +/** + * cpufreq_set_cur_state - callback function to set the current cooling state. + * @cdev: thermal cooling device pointer. + * @state: set this variable to the current cooling state. + */ +static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev, + unsigned long state) +{ + int ret = -EINVAL; + struct cpufreq_cooling_device *cpufreq_device; + + mutex_lock(&cooling_cpufreq_lock); + list_for_each_entry(cpufreq_device, &cooling_cpufreq_list, node) { + if (cpufreq_device && cpufreq_device->cool_dev == cdev) { + ret = 0; + break; + } + } + if (!ret) + ret = cpufreq_apply_cooling(cpufreq_device, state); + + mutex_unlock(&cooling_cpufreq_lock); + + return ret; +} + +/* Bind cpufreq callbacks to thermal cooling device ops */ +static struct thermal_cooling_device_ops const cpufreq_cooling_ops = { + .get_max_state = cpufreq_get_max_state, + .get_cur_state = cpufreq_get_cur_state, + .set_cur_state = cpufreq_set_cur_state, +}; + +/* Notifier for cpufreq policy change */ +static struct notifier_block thermal_cpufreq_notifier_block = { + .notifier_call = cpufreq_thermal_notifier, +}; + +/** + * cpufreq_cooling_register - function to create cpufreq cooling device. + * @clip_cpus: cpumask of cpus where the frequency constraints will happen. + */ +struct thermal_cooling_device *cpufreq_cooling_register( + struct cpumask *clip_cpus) +{ + struct thermal_cooling_device *cool_dev; + struct cpufreq_cooling_device *cpufreq_dev = NULL; + unsigned int cpufreq_dev_count = 0, min = 0, max = 0; + char dev_name[THERMAL_NAME_LENGTH]; + int ret = 0, id = 0, i; + struct cpufreq_policy policy; + + list_for_each_entry(cpufreq_dev, &cooling_cpufreq_list, node) + cpufreq_dev_count++; + + /*Verify that all the clip cpus have same freq_min, freq_max limit*/ + for_each_cpu(i, clip_cpus) { + /*continue if cpufreq policy not found and not return error*/ + if (!cpufreq_get_policy(&policy, i)) + continue; + if (min == 0 && max == 0) { + min = policy.cpuinfo.min_freq; + max = policy.cpuinfo.max_freq; + } else { + if (min != policy.cpuinfo.min_freq || + max != policy.cpuinfo.max_freq) + return ERR_PTR(-EINVAL); +} + } + cpufreq_dev = kzalloc(sizeof(struct cpufreq_cooling_device), + GFP_KERNEL); + if (!cpufreq_dev) + return ERR_PTR(-ENOMEM); + + cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus); + + if (cpufreq_dev_count == 0) + mutex_init(&cooling_cpufreq_lock); + + ret = get_idr(&cpufreq_idr, &cpufreq_dev->id); + if (ret) { + kfree(cpufreq_dev); + return ERR_PTR(-EINVAL); + } + + sprintf(dev_name, "thermal-cpufreq-%d", cpufreq_dev->id); + + cool_dev = thermal_cooling_device_register(dev_name, cpufreq_dev, + &cpufreq_cooling_ops); + if (!cool_dev) { + release_idr(&cpufreq_idr, cpufreq_dev->id); + kfree(cpufreq_dev); + return ERR_PTR(-EINVAL); + } + cpufreq_dev->id = id; + cpufreq_dev->cool_dev = cool_dev; + cpufreq_dev->cpufreq_state = 0; + mutex_lock(&cooling_cpufreq_lock); + list_add_tail(&cpufreq_dev->node, &cooling_cpufreq_list); + + /* Register the notifier for first cpufreq cooling device */ + if (cpufreq_dev_count == 0) + cpufreq_register_notifier(&thermal_cpufreq_notifier_block, + CPUFREQ_POLICY_NOTIFIER); + + mutex_unlock(&cooling_cpufreq_lock); + return cool_dev; +} +EXPORT_SYMBOL(cpufreq_cooling_register); + +/** + * cpufreq_cooling_unregister - function to remove cpufreq cooling device. + * @cdev: thermal cooling device pointer. + */ +void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) +{ + struct cpufreq_cooling_device *cpufreq_dev = NULL; + unsigned int cpufreq_dev_count = 0; + + mutex_lock(&cooling_cpufreq_lock); + list_for_each_entry(cpufreq_dev, &cooling_cpufreq_list, node) { + if (cpufreq_dev && cpufreq_dev->cool_dev == cdev) + break; + cpufreq_dev_count++; + } + + if (!cpufreq_dev || cpufreq_dev->cool_dev != cdev) { + mutex_unlock(&cooling_cpufreq_lock); + return; + } + + list_del(&cpufreq_dev->node); + + /* Unregister the notifier for the last cpufreq cooling device */ + if (cpufreq_dev_count == 1) { + cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block, + CPUFREQ_POLICY_NOTIFIER); + } + mutex_unlock(&cooling_cpufreq_lock); + thermal_cooling_device_unregister(cpufreq_dev->cool_dev); + release_idr(&cpufreq_idr, cpufreq_dev->id); + if (cpufreq_dev_count == 1) + mutex_destroy(&cooling_cpufreq_lock); + kfree(cpufreq_dev); +} +EXPORT_SYMBOL(cpufreq_cooling_unregister); diff --git a/include/linux/cpu_cooling.h b/include/linux/cpu_cooling.h new file mode 100644 index 000000000000..851530128e65 --- /dev/null +++ b/include/linux/cpu_cooling.h @@ -0,0 +1,58 @@ +/* + * linux/include/linux/cpu_cooling.h + * + * Copyright (C) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com) + * Copyright (C) 2012 Amit Daniel + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#ifndef __CPU_COOLING_H__ +#define __CPU_COOLING_H__ + +#include + +#define CPUFREQ_COOLING_START 0 +#define CPUFREQ_COOLING_STOP 1 + +#ifdef CONFIG_CPU_THERMAL +/** + * cpufreq_cooling_register - function to create cpufreq cooling device. + * @clip_cpus: cpumask of cpus where the frequency constraints will happen + */ +struct thermal_cooling_device *cpufreq_cooling_register( + struct cpumask *clip_cpus); + +/** + * cpufreq_cooling_unregister - function to remove cpufreq cooling device. + * @cdev: thermal cooling device pointer. + */ +void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev); +#else /* !CONFIG_CPU_THERMAL */ +static inline struct thermal_cooling_device *cpufreq_cooling_register( + struct cpumask *clip_cpus) +{ + return NULL; +} +static inline void cpufreq_cooling_unregister( + struct thermal_cooling_device *cdev) +{ + return; +} +#endif /* CONFIG_CPU_THERMAL */ + +#endif /* __CPU_COOLING_H__ */ From c48cbba6fee3587bdfe77ef850a1a0aa30a2a60f Mon Sep 17 00:00:00 2001 From: Amit Daniel Kachhap Date: Thu, 16 Aug 2012 17:11:41 +0530 Subject: [PATCH 19/30] hwmon: exynos4: move thermal sensor driver to driver/thermal directory This movement is needed because the hwmon entries and corresponding sysfs interface is a duplicate of utilities already provided by driver/thermal/thermal_sys.c. The goal is to place it in thermal folder and add necessary functions to use the in-kernel thermal interfaces. Signed-off-by: Amit Daniel Kachhap Acked-by: Guenter Roeck Cc: SangWook Ju Cc: Durgadoss Cc: Len Brown Cc: Jean Delvare Cc: Kyungmin Park Cc: Kukjin Kim Signed-off-by: Andrew Morton Signed-off-by: Amit Daniel Kachhap Signed-off-by: Zhang Rui --- .../exynos4_tmu => thermal/exynos_thermal} | 35 +----- drivers/hwmon/Kconfig | 10 -- drivers/hwmon/Makefile | 1 - drivers/thermal/Kconfig | 7 ++ drivers/thermal/Makefile | 1 + .../exynos_thermal.c} | 113 +----------------- .../{exynos4_tmu.h => exynos_thermal.h} | 8 +- 7 files changed, 19 insertions(+), 156 deletions(-) rename Documentation/{hwmon/exynos4_tmu => thermal/exynos_thermal} (71%) rename drivers/{hwmon/exynos4_tmu.c => thermal/exynos_thermal.c} (74%) rename include/linux/platform_data/{exynos4_tmu.h => exynos_thermal.h} (94%) diff --git a/Documentation/hwmon/exynos4_tmu b/Documentation/thermal/exynos_thermal similarity index 71% rename from Documentation/hwmon/exynos4_tmu rename to Documentation/thermal/exynos_thermal index c3c6b41db607..2b46f67b1ccb 100644 --- a/Documentation/hwmon/exynos4_tmu +++ b/Documentation/thermal/exynos_thermal @@ -46,36 +46,7 @@ The threshold levels are defined as follows: The threshold and each trigger_level are set through the corresponding registers. -When an interrupt occurs, this driver notify user space of -one of four threshold levels for the interrupt -through kobject_uevent_env and sysfs_notify functions. +When an interrupt occurs, this driver notify kernel thermal framework +with the function exynos4_report_trigger. Although an interrupt condition for level_0 can be set, -it is not notified to user space through sysfs_notify function. - -Sysfs Interface ---------------- -name name of the temperature sensor - RO - -temp1_input temperature - RO - -temp1_max temperature for level_1 interrupt - RO - -temp1_crit temperature for level_2 interrupt - RO - -temp1_emergency temperature for level_3 interrupt - RO - -temp1_max_alarm alarm for level_1 interrupt - RO - -temp1_crit_alarm - alarm for level_2 interrupt - RO - -temp1_emergency_alarm - alarm for level_3 interrupt - RO +it can be used to synchronize the cooling action. diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index b0a2e4c37e12..84e02b416a4a 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -324,16 +324,6 @@ config SENSORS_DA9052_ADC This driver can also be built as module. If so, the module will be called da9052-hwmon. -config SENSORS_EXYNOS4_TMU - tristate "Temperature sensor on Samsung EXYNOS4" - depends on ARCH_EXYNOS4 - help - If you say yes here you get support for TMU (Thermal Management - Unit) on SAMSUNG EXYNOS4 series of SoC. - - This driver can also be built as a module. If so, the module - will be called exynos4-tmu. - config SENSORS_I5K_AMB tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" depends on PCI && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 7aa98119c4ab..3eafe483f36a 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -49,7 +49,6 @@ obj-$(CONFIG_SENSORS_DS1621) += ds1621.o obj-$(CONFIG_SENSORS_EMC1403) += emc1403.o obj-$(CONFIG_SENSORS_EMC2103) += emc2103.o obj-$(CONFIG_SENSORS_EMC6W201) += emc6w201.o -obj-$(CONFIG_SENSORS_EXYNOS4_TMU) += exynos4_tmu.o obj-$(CONFIG_SENSORS_F71805F) += f71805f.o obj-$(CONFIG_SENSORS_F71882FG) += f71882fg.o obj-$(CONFIG_SENSORS_F75375S) += f75375s.o diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 996003b3438a..8f2b6eaf46b8 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -46,3 +46,10 @@ config RCAR_THERMAL help Enable this to plug the R-Car thermal sensor driver into the Linux thermal framework + +config EXYNOS_THERMAL + tristate "Temperature sensor on Samsung EXYNOS" + depends on ARCH_EXYNOS4 && THERMAL + help + If you say yes here you get support for TMU (Thermal Managment + Unit) on SAMSUNG EXYNOS series of SoC. diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index aae59ad57c42..885550dc64b7 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_THERMAL) += thermal_sys.o obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o +obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o diff --git a/drivers/hwmon/exynos4_tmu.c b/drivers/thermal/exynos_thermal.c similarity index 74% rename from drivers/hwmon/exynos4_tmu.c rename to drivers/thermal/exynos_thermal.c index e912059140cd..556d15b4b029 100644 --- a/drivers/hwmon/exynos4_tmu.c +++ b/drivers/thermal/exynos_thermal.c @@ -1,8 +1,9 @@ /* - * exynos4_tmu.c - Samsung EXYNOS4 TMU (Thermal Management Unit) + * exynos_thermal.c - Samsung EXYNOS TMU (Thermal Management Unit) * * Copyright (C) 2011 Samsung Electronics * Donggeun Kim + * Amit Daniel Kachhap * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -33,10 +34,7 @@ #include #include -#include -#include - -#include +#include #define EXYNOS4_TMU_REG_TRIMINFO 0x0 #define EXYNOS4_TMU_REG_CONTROL 0x20 @@ -70,7 +68,6 @@ struct exynos4_tmu_data { struct exynos4_tmu_platform_data *pdata; - struct device *hwmon_dev; struct resource *mem; void __iomem *base; int irq; @@ -246,8 +243,6 @@ static void exynos4_tmu_work(struct work_struct *work) writel(EXYNOS4_TMU_INTCLEAR_VAL, data->base + EXYNOS4_TMU_REG_INTCLEAR); - kobject_uevent(&data->hwmon_dev->kobj, KOBJ_CHANGE); - enable_irq(data->irq); clk_disable(data->clk); @@ -264,87 +259,6 @@ static irqreturn_t exynos4_tmu_irq(int irq, void *id) return IRQ_HANDLED; } -static ssize_t exynos4_tmu_show_name(struct device *dev, - struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "exynos4-tmu\n"); -} - -static ssize_t exynos4_tmu_show_temp(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct exynos4_tmu_data *data = dev_get_drvdata(dev); - int ret; - - ret = exynos4_tmu_read(data); - if (ret < 0) - return ret; - - /* convert from degree Celsius to millidegree Celsius */ - return sprintf(buf, "%d\n", ret * 1000); -} - -static ssize_t exynos4_tmu_show_alarm(struct device *dev, - struct device_attribute *devattr, char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct exynos4_tmu_data *data = dev_get_drvdata(dev); - struct exynos4_tmu_platform_data *pdata = data->pdata; - int temp; - unsigned int trigger_level; - - temp = exynos4_tmu_read(data); - if (temp < 0) - return temp; - - trigger_level = pdata->threshold + pdata->trigger_levels[attr->index]; - - return sprintf(buf, "%d\n", !!(temp > trigger_level)); -} - -static ssize_t exynos4_tmu_show_level(struct device *dev, - struct device_attribute *devattr, char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct exynos4_tmu_data *data = dev_get_drvdata(dev); - struct exynos4_tmu_platform_data *pdata = data->pdata; - unsigned int temp = pdata->threshold + - pdata->trigger_levels[attr->index]; - - return sprintf(buf, "%u\n", temp * 1000); -} - -static DEVICE_ATTR(name, S_IRUGO, exynos4_tmu_show_name, NULL); -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, exynos4_tmu_show_temp, NULL, 0); - -static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, - exynos4_tmu_show_alarm, NULL, 1); -static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, - exynos4_tmu_show_alarm, NULL, 2); -static SENSOR_DEVICE_ATTR(temp1_emergency_alarm, S_IRUGO, - exynos4_tmu_show_alarm, NULL, 3); - -static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, exynos4_tmu_show_level, NULL, 1); -static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, exynos4_tmu_show_level, NULL, 2); -static SENSOR_DEVICE_ATTR(temp1_emergency, S_IRUGO, - exynos4_tmu_show_level, NULL, 3); - -static struct attribute *exynos4_tmu_attributes[] = { - &dev_attr_name.attr, - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, - &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, - &sensor_dev_attr_temp1_emergency_alarm.dev_attr.attr, - &sensor_dev_attr_temp1_max.dev_attr.attr, - &sensor_dev_attr_temp1_crit.dev_attr.attr, - &sensor_dev_attr_temp1_emergency.dev_attr.attr, - NULL, -}; - -static const struct attribute_group exynos4_tmu_attr_group = { - .attrs = exynos4_tmu_attributes, -}; - static int __devinit exynos4_tmu_probe(struct platform_device *pdev) { struct exynos4_tmu_data *data; @@ -418,25 +332,9 @@ static int __devinit exynos4_tmu_probe(struct platform_device *pdev) goto err_clk; } - ret = sysfs_create_group(&pdev->dev.kobj, &exynos4_tmu_attr_group); - if (ret) { - dev_err(&pdev->dev, "Failed to create sysfs group\n"); - goto err_clk; - } - - data->hwmon_dev = hwmon_device_register(&pdev->dev); - if (IS_ERR(data->hwmon_dev)) { - ret = PTR_ERR(data->hwmon_dev); - dev_err(&pdev->dev, "Failed to register hwmon device\n"); - goto err_create_group; - } - exynos4_tmu_control(pdev, true); return 0; - -err_create_group: - sysfs_remove_group(&pdev->dev.kobj, &exynos4_tmu_attr_group); err_clk: platform_set_drvdata(pdev, NULL); clk_put(data->clk); @@ -458,9 +356,6 @@ static int __devexit exynos4_tmu_remove(struct platform_device *pdev) exynos4_tmu_control(pdev, false); - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&pdev->dev.kobj, &exynos4_tmu_attr_group); - clk_put(data->clk); free_irq(data->irq, data); @@ -495,7 +390,7 @@ static int exynos4_tmu_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(exynos4_tmu_pm, exynos4_tmu_suspend, exynos4_tmu_resume); -#define EXYNOS4_TMU_PM &exynos4_tmu_pm +#define EXYNOS4_TMU_PM (&exynos4_tmu_pm) #else #define EXYNOS4_TMU_PM NULL #endif diff --git a/include/linux/platform_data/exynos4_tmu.h b/include/linux/platform_data/exynos_thermal.h similarity index 94% rename from include/linux/platform_data/exynos4_tmu.h rename to include/linux/platform_data/exynos_thermal.h index 39e038cca590..d6c3f93e7c62 100644 --- a/include/linux/platform_data/exynos4_tmu.h +++ b/include/linux/platform_data/exynos_thermal.h @@ -1,5 +1,5 @@ /* - * exynos4_tmu.h - Samsung EXYNOS4 TMU (Thermal Management Unit) + * exynos_thermal.h - Samsung EXYNOS4 TMU (Thermal Management Unit) * * Copyright (C) 2011 Samsung Electronics * Donggeun Kim @@ -19,8 +19,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef _LINUX_EXYNOS4_TMU_H -#define _LINUX_EXYNOS4_TMU_H +#ifndef _LINUX_EXYNOS_THERMAL_H +#define _LINUX_EXYNOS_THERMAL_H enum calibration_type { TYPE_ONE_POINT_TRIMMING, @@ -80,4 +80,4 @@ struct exynos4_tmu_platform_data { enum calibration_type cal_type; }; -#endif /* _LINUX_EXYNOS4_TMU_H */ +#endif /* _LINUX_EXYNOS_THERMAL_H */ From f22d9c03ccc9339d02579914d85b2db81a985a8e Mon Sep 17 00:00:00 2001 From: Amit Daniel Kachhap Date: Thu, 16 Aug 2012 17:11:42 +0530 Subject: [PATCH 20/30] thermal: exynos5: add exynos5250 thermal sensor driver support Insert exynos5 TMU sensor changes into the thermal driver. Some exynos4 changes are made generic for exynos series. [akpm@linux-foundation.org: fix comment layout] Signed-off-by: SangWook Ju Signed-off-by: Amit Daniel Kachhap Acked-by: Guenter Roeck Cc: Durgadoss Cc: Len Brown Cc: Jean Delvare Cc: Kyungmin Park Cc: Kukjin Kim Signed-off-by: Andrew Morton Signed-off-by: Amit Daniel Kachhap Signed-off-by: Zhang Rui --- drivers/thermal/Kconfig | 2 +- drivers/thermal/exynos_thermal.c | 341 ++++++++++++------- include/linux/platform_data/exynos_thermal.h | 19 +- 3 files changed, 235 insertions(+), 127 deletions(-) diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 8f2b6eaf46b8..edfd67d25013 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -49,7 +49,7 @@ config RCAR_THERMAL config EXYNOS_THERMAL tristate "Temperature sensor on Samsung EXYNOS" - depends on ARCH_EXYNOS4 && THERMAL + depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) && THERMAL help If you say yes here you get support for TMU (Thermal Managment Unit) on SAMSUNG EXYNOS series of SoC. diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c index 556d15b4b029..c9a33dd5e4d8 100644 --- a/drivers/thermal/exynos_thermal.c +++ b/drivers/thermal/exynos_thermal.c @@ -33,44 +33,83 @@ #include #include #include - #include +#include -#define EXYNOS4_TMU_REG_TRIMINFO 0x0 -#define EXYNOS4_TMU_REG_CONTROL 0x20 -#define EXYNOS4_TMU_REG_STATUS 0x28 -#define EXYNOS4_TMU_REG_CURRENT_TEMP 0x40 -#define EXYNOS4_TMU_REG_THRESHOLD_TEMP 0x44 -#define EXYNOS4_TMU_REG_TRIG_LEVEL0 0x50 -#define EXYNOS4_TMU_REG_TRIG_LEVEL1 0x54 -#define EXYNOS4_TMU_REG_TRIG_LEVEL2 0x58 -#define EXYNOS4_TMU_REG_TRIG_LEVEL3 0x5C -#define EXYNOS4_TMU_REG_PAST_TEMP0 0x60 -#define EXYNOS4_TMU_REG_PAST_TEMP1 0x64 -#define EXYNOS4_TMU_REG_PAST_TEMP2 0x68 -#define EXYNOS4_TMU_REG_PAST_TEMP3 0x6C -#define EXYNOS4_TMU_REG_INTEN 0x70 -#define EXYNOS4_TMU_REG_INTSTAT 0x74 -#define EXYNOS4_TMU_REG_INTCLEAR 0x78 +#include -#define EXYNOS4_TMU_GAIN_SHIFT 8 -#define EXYNOS4_TMU_REF_VOLTAGE_SHIFT 24 +/* Exynos generic registers */ +#define EXYNOS_TMU_REG_TRIMINFO 0x0 +#define EXYNOS_TMU_REG_CONTROL 0x20 +#define EXYNOS_TMU_REG_STATUS 0x28 +#define EXYNOS_TMU_REG_CURRENT_TEMP 0x40 +#define EXYNOS_TMU_REG_INTEN 0x70 +#define EXYNOS_TMU_REG_INTSTAT 0x74 +#define EXYNOS_TMU_REG_INTCLEAR 0x78 -#define EXYNOS4_TMU_TRIM_TEMP_MASK 0xff -#define EXYNOS4_TMU_CORE_ON 3 -#define EXYNOS4_TMU_CORE_OFF 2 -#define EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET 50 -#define EXYNOS4_TMU_TRIG_LEVEL0_MASK 0x1 -#define EXYNOS4_TMU_TRIG_LEVEL1_MASK 0x10 -#define EXYNOS4_TMU_TRIG_LEVEL2_MASK 0x100 -#define EXYNOS4_TMU_TRIG_LEVEL3_MASK 0x1000 -#define EXYNOS4_TMU_INTCLEAR_VAL 0x1111 +#define EXYNOS_TMU_TRIM_TEMP_MASK 0xff +#define EXYNOS_TMU_GAIN_SHIFT 8 +#define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24 +#define EXYNOS_TMU_CORE_ON 3 +#define EXYNOS_TMU_CORE_OFF 2 +#define EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET 50 -struct exynos4_tmu_data { - struct exynos4_tmu_platform_data *pdata; +/* Exynos4210 specific registers */ +#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44 +#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50 +#define EXYNOS4210_TMU_REG_TRIG_LEVEL1 0x54 +#define EXYNOS4210_TMU_REG_TRIG_LEVEL2 0x58 +#define EXYNOS4210_TMU_REG_TRIG_LEVEL3 0x5C +#define EXYNOS4210_TMU_REG_PAST_TEMP0 0x60 +#define EXYNOS4210_TMU_REG_PAST_TEMP1 0x64 +#define EXYNOS4210_TMU_REG_PAST_TEMP2 0x68 +#define EXYNOS4210_TMU_REG_PAST_TEMP3 0x6C + +#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK 0x1 +#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10 +#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100 +#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000 +#define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111 + +/* Exynos5250 and Exynos4412 specific registers */ +#define EXYNOS_TMU_TRIMINFO_CON 0x14 +#define EXYNOS_THD_TEMP_RISE 0x50 +#define EXYNOS_THD_TEMP_FALL 0x54 +#define EXYNOS_EMUL_CON 0x80 + +#define EXYNOS_TRIMINFO_RELOAD 0x1 +#define EXYNOS_TMU_CLEAR_RISE_INT 0x111 +#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 16) +#define EXYNOS_MUX_ADDR_VALUE 6 +#define EXYNOS_MUX_ADDR_SHIFT 20 +#define EXYNOS_TMU_TRIP_MODE_SHIFT 13 + +#define EFUSE_MIN_VALUE 40 +#define EFUSE_MAX_VALUE 100 + +/* In-kernel thermal framework related macros & definations */ +#define SENSOR_NAME_LEN 16 +#define MAX_TRIP_COUNT 8 +#define MAX_COOLING_DEVICE 4 + +#define ACTIVE_INTERVAL 500 +#define IDLE_INTERVAL 10000 + +/* CPU Zone information */ +#define PANIC_ZONE 4 +#define WARN_ZONE 3 +#define MONITOR_ZONE 2 +#define SAFE_ZONE 1 + +#define GET_ZONE(trip) (trip + 2) +#define GET_TRIP(zone) (zone - 2) + +struct exynos_tmu_data { + struct exynos_tmu_platform_data *pdata; struct resource *mem; void __iomem *base; int irq; + enum soc_type soc; struct work_struct irq_work; struct mutex lock; struct clk *clk; @@ -81,16 +120,17 @@ struct exynos4_tmu_data { * TMU treats temperature as a mapped temperature code. * The temperature is converted differently depending on the calibration type. */ -static int temp_to_code(struct exynos4_tmu_data *data, u8 temp) +static int temp_to_code(struct exynos_tmu_data *data, u8 temp) { - struct exynos4_tmu_platform_data *pdata = data->pdata; + struct exynos_tmu_platform_data *pdata = data->pdata; int temp_code; - /* temp should range between 25 and 125 */ - if (temp < 25 || temp > 125) { - temp_code = -EINVAL; - goto out; - } + if (data->soc == SOC_ARCH_EXYNOS4210) + /* temp should range between 25 and 125 */ + if (temp < 25 || temp > 125) { + temp_code = -EINVAL; + goto out; + } switch (pdata->cal_type) { case TYPE_TWO_POINT_TRIMMING: @@ -102,7 +142,7 @@ static int temp_to_code(struct exynos4_tmu_data *data, u8 temp) temp_code = temp + data->temp_error1 - 25; break; default: - temp_code = temp + EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET; + temp_code = temp + EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET; break; } out: @@ -113,16 +153,17 @@ static int temp_to_code(struct exynos4_tmu_data *data, u8 temp) * Calculate a temperature value from a temperature code. * The unit of the temperature is degree Celsius. */ -static int code_to_temp(struct exynos4_tmu_data *data, u8 temp_code) +static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code) { - struct exynos4_tmu_platform_data *pdata = data->pdata; + struct exynos_tmu_platform_data *pdata = data->pdata; int temp; - /* temp_code should range between 75 and 175 */ - if (temp_code < 75 || temp_code > 175) { - temp = -ENODATA; - goto out; - } + if (data->soc == SOC_ARCH_EXYNOS4210) + /* temp_code should range between 75 and 175 */ + if (temp_code < 75 || temp_code > 175) { + temp = -ENODATA; + goto out; + } switch (pdata->cal_type) { case TYPE_TWO_POINT_TRIMMING: @@ -133,54 +174,92 @@ static int code_to_temp(struct exynos4_tmu_data *data, u8 temp_code) temp = temp_code - data->temp_error1 + 25; break; default: - temp = temp_code - EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET; + temp = temp_code - EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET; break; } out: return temp; } -static int exynos4_tmu_initialize(struct platform_device *pdev) +static int exynos_tmu_initialize(struct platform_device *pdev) { - struct exynos4_tmu_data *data = platform_get_drvdata(pdev); - struct exynos4_tmu_platform_data *pdata = data->pdata; - unsigned int status, trim_info; + struct exynos_tmu_data *data = platform_get_drvdata(pdev); + struct exynos_tmu_platform_data *pdata = data->pdata; + unsigned int status, trim_info, rising_threshold; int ret = 0, threshold_code; mutex_lock(&data->lock); clk_enable(data->clk); - status = readb(data->base + EXYNOS4_TMU_REG_STATUS); + status = readb(data->base + EXYNOS_TMU_REG_STATUS); if (!status) { ret = -EBUSY; goto out; } - /* Save trimming info in order to perform calibration */ - trim_info = readl(data->base + EXYNOS4_TMU_REG_TRIMINFO); - data->temp_error1 = trim_info & EXYNOS4_TMU_TRIM_TEMP_MASK; - data->temp_error2 = ((trim_info >> 8) & EXYNOS4_TMU_TRIM_TEMP_MASK); - - /* Write temperature code for threshold */ - threshold_code = temp_to_code(data, pdata->threshold); - if (threshold_code < 0) { - ret = threshold_code; - goto out; + if (data->soc == SOC_ARCH_EXYNOS) { + __raw_writel(EXYNOS_TRIMINFO_RELOAD, + data->base + EXYNOS_TMU_TRIMINFO_CON); } - writeb(threshold_code, - data->base + EXYNOS4_TMU_REG_THRESHOLD_TEMP); + /* Save trimming info in order to perform calibration */ + trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); + data->temp_error1 = trim_info & EXYNOS_TMU_TRIM_TEMP_MASK; + data->temp_error2 = ((trim_info >> 8) & EXYNOS_TMU_TRIM_TEMP_MASK); - writeb(pdata->trigger_levels[0], - data->base + EXYNOS4_TMU_REG_TRIG_LEVEL0); - writeb(pdata->trigger_levels[1], - data->base + EXYNOS4_TMU_REG_TRIG_LEVEL1); - writeb(pdata->trigger_levels[2], - data->base + EXYNOS4_TMU_REG_TRIG_LEVEL2); - writeb(pdata->trigger_levels[3], - data->base + EXYNOS4_TMU_REG_TRIG_LEVEL3); + if ((EFUSE_MIN_VALUE > data->temp_error1) || + (data->temp_error1 > EFUSE_MAX_VALUE) || + (data->temp_error2 != 0)) + data->temp_error1 = pdata->efuse_value; - writel(EXYNOS4_TMU_INTCLEAR_VAL, - data->base + EXYNOS4_TMU_REG_INTCLEAR); + if (data->soc == SOC_ARCH_EXYNOS4210) { + /* Write temperature code for threshold */ + threshold_code = temp_to_code(data, pdata->threshold); + if (threshold_code < 0) { + ret = threshold_code; + goto out; + } + writeb(threshold_code, + data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP); + + writeb(pdata->trigger_levels[0], + data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0); + writeb(pdata->trigger_levels[1], + data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL1); + writeb(pdata->trigger_levels[2], + data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL2); + writeb(pdata->trigger_levels[3], + data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL3); + + writel(EXYNOS4210_TMU_INTCLEAR_VAL, + data->base + EXYNOS_TMU_REG_INTCLEAR); + } else if (data->soc == SOC_ARCH_EXYNOS) { + /* Write temperature code for threshold */ + threshold_code = temp_to_code(data, pdata->trigger_levels[0]); + if (threshold_code < 0) { + ret = threshold_code; + goto out; + } + rising_threshold = threshold_code; + threshold_code = temp_to_code(data, pdata->trigger_levels[1]); + if (threshold_code < 0) { + ret = threshold_code; + goto out; + } + rising_threshold |= (threshold_code << 8); + threshold_code = temp_to_code(data, pdata->trigger_levels[2]); + if (threshold_code < 0) { + ret = threshold_code; + goto out; + } + rising_threshold |= (threshold_code << 16); + + writel(rising_threshold, + data->base + EXYNOS_THD_TEMP_RISE); + writel(0, data->base + EXYNOS_THD_TEMP_FALL); + + writel(EXYNOS_TMU_CLEAR_RISE_INT|EXYNOS_TMU_CLEAR_FALL_INT, + data->base + EXYNOS_TMU_REG_INTCLEAR); + } out: clk_disable(data->clk); mutex_unlock(&data->lock); @@ -188,35 +267,41 @@ static int exynos4_tmu_initialize(struct platform_device *pdev) return ret; } -static void exynos4_tmu_control(struct platform_device *pdev, bool on) +static void exynos_tmu_control(struct platform_device *pdev, bool on) { - struct exynos4_tmu_data *data = platform_get_drvdata(pdev); - struct exynos4_tmu_platform_data *pdata = data->pdata; + struct exynos_tmu_data *data = platform_get_drvdata(pdev); + struct exynos_tmu_platform_data *pdata = data->pdata; unsigned int con, interrupt_en; mutex_lock(&data->lock); clk_enable(data->clk); - con = pdata->reference_voltage << EXYNOS4_TMU_REF_VOLTAGE_SHIFT | - pdata->gain << EXYNOS4_TMU_GAIN_SHIFT; + con = pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT | + pdata->gain << EXYNOS_TMU_GAIN_SHIFT; + + if (data->soc == SOC_ARCH_EXYNOS) { + con |= pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT; + con |= (EXYNOS_MUX_ADDR_VALUE << EXYNOS_MUX_ADDR_SHIFT); + } + if (on) { - con |= EXYNOS4_TMU_CORE_ON; + con |= EXYNOS_TMU_CORE_ON; interrupt_en = pdata->trigger_level3_en << 12 | pdata->trigger_level2_en << 8 | pdata->trigger_level1_en << 4 | pdata->trigger_level0_en; } else { - con |= EXYNOS4_TMU_CORE_OFF; + con |= EXYNOS_TMU_CORE_OFF; interrupt_en = 0; /* Disable all interrupts */ } - writel(interrupt_en, data->base + EXYNOS4_TMU_REG_INTEN); - writel(con, data->base + EXYNOS4_TMU_REG_CONTROL); + writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN); + writel(con, data->base + EXYNOS_TMU_REG_CONTROL); clk_disable(data->clk); mutex_unlock(&data->lock); } -static int exynos4_tmu_read(struct exynos4_tmu_data *data) +static int exynos_tmu_read(struct exynos_tmu_data *data) { u8 temp_code; int temp; @@ -224,7 +309,7 @@ static int exynos4_tmu_read(struct exynos4_tmu_data *data) mutex_lock(&data->lock); clk_enable(data->clk); - temp_code = readb(data->base + EXYNOS4_TMU_REG_CURRENT_TEMP); + temp_code = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP); temp = code_to_temp(data, temp_code); clk_disable(data->clk); @@ -233,25 +318,30 @@ static int exynos4_tmu_read(struct exynos4_tmu_data *data) return temp; } -static void exynos4_tmu_work(struct work_struct *work) +static void exynos_tmu_work(struct work_struct *work) { - struct exynos4_tmu_data *data = container_of(work, - struct exynos4_tmu_data, irq_work); + struct exynos_tmu_data *data = container_of(work, + struct exynos_tmu_data, irq_work); mutex_lock(&data->lock); clk_enable(data->clk); - writel(EXYNOS4_TMU_INTCLEAR_VAL, data->base + EXYNOS4_TMU_REG_INTCLEAR); - enable_irq(data->irq); + if (data->soc == SOC_ARCH_EXYNOS) + writel(EXYNOS_TMU_CLEAR_RISE_INT, + data->base + EXYNOS_TMU_REG_INTCLEAR); + else + writel(EXYNOS4210_TMU_INTCLEAR_VAL, + data->base + EXYNOS_TMU_REG_INTCLEAR); clk_disable(data->clk); mutex_unlock(&data->lock); + enable_irq(data->irq); } -static irqreturn_t exynos4_tmu_irq(int irq, void *id) +static irqreturn_t exynos_tmu_irq(int irq, void *id) { - struct exynos4_tmu_data *data = id; + struct exynos_tmu_data *data = id; disable_irq_nosync(irq); schedule_work(&data->irq_work); @@ -259,18 +349,17 @@ static irqreturn_t exynos4_tmu_irq(int irq, void *id) return IRQ_HANDLED; } -static int __devinit exynos4_tmu_probe(struct platform_device *pdev) +static int __devinit exynos_tmu_probe(struct platform_device *pdev) { - struct exynos4_tmu_data *data; - struct exynos4_tmu_platform_data *pdata = pdev->dev.platform_data; + struct exynos_tmu_data *data; + struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data; int ret; if (!pdata) { dev_err(&pdev->dev, "No platform init data supplied.\n"); return -ENODEV; } - - data = kzalloc(sizeof(struct exynos4_tmu_data), GFP_KERNEL); + data = kzalloc(sizeof(struct exynos_tmu_data), GFP_KERNEL); if (!data) { dev_err(&pdev->dev, "Failed to allocate driver structure\n"); return -ENOMEM; @@ -283,7 +372,7 @@ static int __devinit exynos4_tmu_probe(struct platform_device *pdev) goto err_free; } - INIT_WORK(&data->irq_work, exynos4_tmu_work); + INIT_WORK(&data->irq_work, exynos_tmu_work); data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!data->mem) { @@ -307,9 +396,8 @@ static int __devinit exynos4_tmu_probe(struct platform_device *pdev) goto err_mem_region; } - ret = request_irq(data->irq, exynos4_tmu_irq, - IRQF_TRIGGER_RISING, - "exynos4-tmu", data); + ret = request_irq(data->irq, exynos_tmu_irq, + IRQF_TRIGGER_RISING, "exynos-tmu", data); if (ret) { dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); goto err_io_remap; @@ -322,17 +410,26 @@ static int __devinit exynos4_tmu_probe(struct platform_device *pdev) goto err_irq; } + if (pdata->type == SOC_ARCH_EXYNOS || + pdata->type == SOC_ARCH_EXYNOS4210) + data->soc = pdata->type; + else { + ret = -EINVAL; + dev_err(&pdev->dev, "Platform not supported\n"); + goto err_clk; + } + data->pdata = pdata; platform_set_drvdata(pdev, data); mutex_init(&data->lock); - ret = exynos4_tmu_initialize(pdev); + ret = exynos_tmu_initialize(pdev); if (ret) { dev_err(&pdev->dev, "Failed to initialize TMU\n"); goto err_clk; } - exynos4_tmu_control(pdev, true); + exynos_tmu_control(pdev, true); return 0; err_clk: @@ -350,11 +447,11 @@ static int __devinit exynos4_tmu_probe(struct platform_device *pdev) return ret; } -static int __devexit exynos4_tmu_remove(struct platform_device *pdev) +static int __devexit exynos_tmu_remove(struct platform_device *pdev) { - struct exynos4_tmu_data *data = platform_get_drvdata(pdev); + struct exynos_tmu_data *data = platform_get_drvdata(pdev); - exynos4_tmu_control(pdev, false); + exynos_tmu_control(pdev, false); clk_put(data->clk); @@ -371,43 +468,43 @@ static int __devexit exynos4_tmu_remove(struct platform_device *pdev) } #ifdef CONFIG_PM_SLEEP -static int exynos4_tmu_suspend(struct device *dev) +static int exynos_tmu_suspend(struct device *dev) { - exynos4_tmu_control(to_platform_device(dev), false); + exynos_tmu_control(to_platform_device(dev), false); return 0; } -static int exynos4_tmu_resume(struct device *dev) +static int exynos_tmu_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); - exynos4_tmu_initialize(pdev); - exynos4_tmu_control(pdev, true); + exynos_tmu_initialize(pdev); + exynos_tmu_control(pdev, true); return 0; } -static SIMPLE_DEV_PM_OPS(exynos4_tmu_pm, - exynos4_tmu_suspend, exynos4_tmu_resume); -#define EXYNOS4_TMU_PM (&exynos4_tmu_pm) +static SIMPLE_DEV_PM_OPS(exynos_tmu_pm, + exynos_tmu_suspend, exynos_tmu_resume); +#define EXYNOS_TMU_PM (&exynos_tmu_pm) #else -#define EXYNOS4_TMU_PM NULL +#define EXYNOS_TMU_PM NULL #endif -static struct platform_driver exynos4_tmu_driver = { +static struct platform_driver exynos_tmu_driver = { .driver = { - .name = "exynos4-tmu", + .name = "exynos-tmu", .owner = THIS_MODULE, - .pm = EXYNOS4_TMU_PM, + .pm = EXYNOS_TMU_PM, }, - .probe = exynos4_tmu_probe, - .remove = __devexit_p(exynos4_tmu_remove), + .probe = exynos_tmu_probe, + .remove = __devexit_p(exynos_tmu_remove), }; -module_platform_driver(exynos4_tmu_driver); +module_platform_driver(exynos_tmu_driver); -MODULE_DESCRIPTION("EXYNOS4 TMU Driver"); +MODULE_DESCRIPTION("EXYNOS TMU Driver"); MODULE_AUTHOR("Donggeun Kim "); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:exynos4-tmu"); +MODULE_ALIAS("platform:exynos-tmu"); diff --git a/include/linux/platform_data/exynos_thermal.h b/include/linux/platform_data/exynos_thermal.h index d6c3f93e7c62..a9e960aaf987 100644 --- a/include/linux/platform_data/exynos_thermal.h +++ b/include/linux/platform_data/exynos_thermal.h @@ -1,5 +1,5 @@ /* - * exynos_thermal.h - Samsung EXYNOS4 TMU (Thermal Management Unit) + * exynos_thermal.h - Samsung EXYNOS TMU (Thermal Management Unit) * * Copyright (C) 2011 Samsung Electronics * Donggeun Kim @@ -28,8 +28,12 @@ enum calibration_type { TYPE_NONE, }; +enum soc_type { + SOC_ARCH_EXYNOS4210 = 1, + SOC_ARCH_EXYNOS, +}; /** - * struct exynos4_tmu_platform_data + * struct exynos_tmu_platform_data * @threshold: basic temperature for generating interrupt * 25 <= threshold <= 125 [unit: degree Celsius] * @trigger_levels: array for each interrupt levels @@ -63,11 +67,15 @@ enum calibration_type { * @reference_voltage: reference voltage of amplifier * in the positive-TC generator block * 0 <= reference_voltage <= 31 + * @noise_cancel_mode: noise cancellation mode + * 000, 100, 101, 110 and 111 can be different modes + * @type: determines the type of SOC + * @efuse_value: platform defined fuse value * @cal_type: calibration type for temperature * - * This structure is required for configuration of exynos4_tmu driver. + * This structure is required for configuration of exynos_tmu driver. */ -struct exynos4_tmu_platform_data { +struct exynos_tmu_platform_data { u8 threshold; u8 trigger_levels[4]; bool trigger_level0_en; @@ -77,7 +85,10 @@ struct exynos4_tmu_platform_data { u8 gain; u8 reference_voltage; + u8 noise_cancel_mode; + u32 efuse_value; enum calibration_type cal_type; + enum soc_type type; }; #endif /* _LINUX_EXYNOS_THERMAL_H */ From 7e0b55e60659972a563e68fbfdccabf78e25afc7 Mon Sep 17 00:00:00 2001 From: Amit Daniel Kachhap Date: Thu, 16 Aug 2012 17:11:43 +0530 Subject: [PATCH 21/30] thermal: exynos: register the tmu sensor with the kernel thermal layer This code added creates a link between temperature sensors, linux thermal framework and cooling devices for samsung exynos platform. This layer monitors the temperature from the sensor and informs the generic thermal layer to take the necessary cooling action. [akpm@linux-foundation.org: fix comment layout] Signed-off-by: Amit Daniel Kachhap Acked-by: Guenter Roeck Cc: SangWook Ju Cc: Durgadoss Cc: Len Brown Cc: Jean Delvare Cc: Kyungmin Park Cc: Kukjin Kim Signed-off-by: Andrew Morton Signed-off-by: Amit Daniel Kachhap Signed-off-by: Zhang Rui --- drivers/thermal/exynos_thermal.c | 406 ++++++++++++++++++- include/linux/platform_data/exynos_thermal.h | 22 + 2 files changed, 426 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c index c9a33dd5e4d8..e79cdc9935b7 100644 --- a/drivers/thermal/exynos_thermal.c +++ b/drivers/thermal/exynos_thermal.c @@ -34,6 +34,9 @@ #include #include #include +#include +#include +#include #include #include @@ -94,6 +97,7 @@ #define ACTIVE_INTERVAL 500 #define IDLE_INTERVAL 10000 +#define MCELSIUS 1000 /* CPU Zone information */ #define PANIC_ZONE 4 @@ -104,6 +108,8 @@ #define GET_ZONE(trip) (trip + 2) #define GET_TRIP(zone) (zone - 2) +#define EXYNOS_ZONE_COUNT 3 + struct exynos_tmu_data { struct exynos_tmu_platform_data *pdata; struct resource *mem; @@ -116,6 +122,371 @@ struct exynos_tmu_data { u8 temp_error1, temp_error2; }; +struct thermal_trip_point_conf { + int trip_val[MAX_TRIP_COUNT]; + int trip_count; +}; + +struct thermal_cooling_conf { + struct freq_clip_table freq_data[MAX_TRIP_COUNT]; + int freq_clip_count; +}; + +struct thermal_sensor_conf { + char name[SENSOR_NAME_LEN]; + int (*read_temperature)(void *data); + struct thermal_trip_point_conf trip_data; + struct thermal_cooling_conf cooling_data; + void *private_data; +}; + +struct exynos_thermal_zone { + enum thermal_device_mode mode; + struct thermal_zone_device *therm_dev; + struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE]; + unsigned int cool_dev_size; + struct platform_device *exynos4_dev; + struct thermal_sensor_conf *sensor_conf; + bool bind; +}; + +static struct exynos_thermal_zone *th_zone; +static void exynos_unregister_thermal(void); +static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf); + +/* Get mode callback functions for thermal zone */ +static int exynos_get_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode *mode) +{ + if (th_zone) + *mode = th_zone->mode; + return 0; +} + +/* Set mode callback functions for thermal zone */ +static int exynos_set_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode mode) +{ + if (!th_zone->therm_dev) { + pr_notice("thermal zone not registered\n"); + return 0; + } + + mutex_lock(&th_zone->therm_dev->lock); + + if (mode == THERMAL_DEVICE_ENABLED) + th_zone->therm_dev->polling_delay = IDLE_INTERVAL; + else + th_zone->therm_dev->polling_delay = 0; + + mutex_unlock(&th_zone->therm_dev->lock); + + th_zone->mode = mode; + thermal_zone_device_update(th_zone->therm_dev); + pr_info("thermal polling set for duration=%d msec\n", + th_zone->therm_dev->polling_delay); + return 0; +} + + +/* Get trip type callback functions for thermal zone */ +static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip, + enum thermal_trip_type *type) +{ + switch (GET_ZONE(trip)) { + case MONITOR_ZONE: + case WARN_ZONE: + *type = THERMAL_TRIP_ACTIVE; + break; + case PANIC_ZONE: + *type = THERMAL_TRIP_CRITICAL; + break; + default: + return -EINVAL; + } + return 0; +} + +/* Get trip temperature callback functions for thermal zone */ +static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip, + unsigned long *temp) +{ + if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE)) + return -EINVAL; + + *temp = th_zone->sensor_conf->trip_data.trip_val[trip]; + /* convert the temperature into millicelsius */ + *temp = *temp * MCELSIUS; + + return 0; +} + +/* Get critical temperature callback functions for thermal zone */ +static int exynos_get_crit_temp(struct thermal_zone_device *thermal, + unsigned long *temp) +{ + int ret; + /* Panic zone */ + ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp); + return ret; +} + +static int exynos_get_frequency_level(unsigned int cpu, unsigned int freq) +{ + int i = 0, ret = -EINVAL; + struct cpufreq_frequency_table *table = NULL; +#ifdef CONFIG_CPU_FREQ + table = cpufreq_frequency_get_table(cpu); +#endif + if (!table) + return ret; + + while (table[i].frequency != CPUFREQ_TABLE_END) { + if (table[i].frequency == CPUFREQ_ENTRY_INVALID) + continue; + if (table[i].frequency == freq) + return i; + i++; + } + return ret; +} + +/* Bind callback functions for thermal zone */ +static int exynos_bind(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev) +{ + int ret = 0, i, tab_size, level; + struct freq_clip_table *tab_ptr, *clip_data; + struct thermal_sensor_conf *data = th_zone->sensor_conf; + + tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data; + tab_size = data->cooling_data.freq_clip_count; + + if (tab_ptr == NULL || tab_size == 0) + return -EINVAL; + + /* find the cooling device registered*/ + for (i = 0; i < th_zone->cool_dev_size; i++) + if (cdev == th_zone->cool_dev[i]) + break; + + /* No matching cooling device */ + if (i == th_zone->cool_dev_size) + return 0; + + /* Bind the thermal zone to the cpufreq cooling device */ + for (i = 0; i < tab_size; i++) { + clip_data = (struct freq_clip_table *)&(tab_ptr[i]); + level = exynos_get_frequency_level(0, clip_data->freq_clip_max); + if (level < 0) + return 0; + switch (GET_ZONE(i)) { + case MONITOR_ZONE: + case WARN_ZONE: + if (thermal_zone_bind_cooling_device(thermal, i, cdev, + level, level)) { + pr_err("error binding cdev inst %d\n", i); + ret = -EINVAL; + } + th_zone->bind = true; + break; + default: + ret = -EINVAL; + } + } + + return ret; +} + +/* Unbind callback functions for thermal zone */ +static int exynos_unbind(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev) +{ + int ret = 0, i, tab_size; + struct thermal_sensor_conf *data = th_zone->sensor_conf; + + if (th_zone->bind == false) + return 0; + + tab_size = data->cooling_data.freq_clip_count; + + if (tab_size == 0) + return -EINVAL; + + /* find the cooling device registered*/ + for (i = 0; i < th_zone->cool_dev_size; i++) + if (cdev == th_zone->cool_dev[i]) + break; + + /* No matching cooling device */ + if (i == th_zone->cool_dev_size) + return 0; + + /* Bind the thermal zone to the cpufreq cooling device */ + for (i = 0; i < tab_size; i++) { + switch (GET_ZONE(i)) { + case MONITOR_ZONE: + case WARN_ZONE: + if (thermal_zone_unbind_cooling_device(thermal, i, + cdev)) { + pr_err("error unbinding cdev inst=%d\n", i); + ret = -EINVAL; + } + th_zone->bind = false; + break; + default: + ret = -EINVAL; + } + } + return ret; +} + +/* Get temperature callback functions for thermal zone */ +static int exynos_get_temp(struct thermal_zone_device *thermal, + unsigned long *temp) +{ + void *data; + + if (!th_zone->sensor_conf) { + pr_info("Temperature sensor not initialised\n"); + return -EINVAL; + } + data = th_zone->sensor_conf->private_data; + *temp = th_zone->sensor_conf->read_temperature(data); + /* convert the temperature into millicelsius */ + *temp = *temp * MCELSIUS; + return 0; +} + +/* Get the temperature trend */ +static int exynos_get_trend(struct thermal_zone_device *thermal, + int trip, enum thermal_trend *trend) +{ + if (thermal->temperature >= trip) + *trend = THERMAL_TREND_RAISING; + else + *trend = THERMAL_TREND_DROPPING; + + return 0; +} +/* Operation callback functions for thermal zone */ +static struct thermal_zone_device_ops const exynos_dev_ops = { + .bind = exynos_bind, + .unbind = exynos_unbind, + .get_temp = exynos_get_temp, + .get_trend = exynos_get_trend, + .get_mode = exynos_get_mode, + .set_mode = exynos_set_mode, + .get_trip_type = exynos_get_trip_type, + .get_trip_temp = exynos_get_trip_temp, + .get_crit_temp = exynos_get_crit_temp, +}; + +/* + * This function may be called from interrupt based temperature sensor + * when threshold is changed. + */ +static void exynos_report_trigger(void) +{ + unsigned int i; + char data[10]; + char *envp[] = { data, NULL }; + + if (!th_zone || !th_zone->therm_dev) + return; + if (th_zone->bind == false) { + for (i = 0; i < th_zone->cool_dev_size; i++) { + if (!th_zone->cool_dev[i]) + continue; + exynos_bind(th_zone->therm_dev, + th_zone->cool_dev[i]); + } + } + + thermal_zone_device_update(th_zone->therm_dev); + + mutex_lock(&th_zone->therm_dev->lock); + /* Find the level for which trip happened */ + for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) { + if (th_zone->therm_dev->last_temperature < + th_zone->sensor_conf->trip_data.trip_val[i] * MCELSIUS) + break; + } + + if (th_zone->mode == THERMAL_DEVICE_ENABLED) { + if (i > 0) + th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL; + else + th_zone->therm_dev->polling_delay = IDLE_INTERVAL; + } + + snprintf(data, sizeof(data), "%u", i); + kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, envp); + mutex_unlock(&th_zone->therm_dev->lock); +} + +/* Register with the in-kernel thermal management */ +static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) +{ + int ret; + struct cpumask mask_val; + + if (!sensor_conf || !sensor_conf->read_temperature) { + pr_err("Temperature sensor not initialised\n"); + return -EINVAL; + } + + th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL); + if (!th_zone) + return -ENOMEM; + + th_zone->sensor_conf = sensor_conf; + cpumask_set_cpu(0, &mask_val); + th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val); + if (IS_ERR(th_zone->cool_dev[0])) { + pr_err("Failed to register cpufreq cooling device\n"); + ret = -EINVAL; + goto err_unregister; + } + th_zone->cool_dev_size++; + + th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name, + EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, 0, + IDLE_INTERVAL); + + if (IS_ERR(th_zone->therm_dev)) { + pr_err("Failed to register thermal zone device\n"); + ret = -EINVAL; + goto err_unregister; + } + th_zone->mode = THERMAL_DEVICE_ENABLED; + + pr_info("Exynos: Kernel Thermal management registered\n"); + + return 0; + +err_unregister: + exynos_unregister_thermal(); + return ret; +} + +/* Un-Register with the in-kernel thermal management */ +static void exynos_unregister_thermal(void) +{ + int i; + + if (th_zone && th_zone->therm_dev) + thermal_zone_device_unregister(th_zone->therm_dev); + + for (i = 0; i < th_zone->cool_dev_size; i++) { + if (th_zone && th_zone->cool_dev[i]) + cpufreq_cooling_unregister(th_zone->cool_dev[i]); + } + + kfree(th_zone); + pr_info("Exynos: Kernel Thermal management unregistered\n"); +} + /* * TMU treats temperature as a mapped temperature code. * The temperature is converted differently depending on the calibration type. @@ -336,6 +707,7 @@ static void exynos_tmu_work(struct work_struct *work) clk_disable(data->clk); mutex_unlock(&data->lock); + exynos_report_trigger(); enable_irq(data->irq); } @@ -348,12 +720,16 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id) return IRQ_HANDLED; } - +static struct thermal_sensor_conf exynos_sensor_conf = { + .name = "exynos-therm", + .read_temperature = (int (*)(void *))exynos_tmu_read, +} +; static int __devinit exynos_tmu_probe(struct platform_device *pdev) { struct exynos_tmu_data *data; struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data; - int ret; + int ret, i; if (!pdata) { dev_err(&pdev->dev, "No platform init data supplied.\n"); @@ -431,6 +807,30 @@ static int __devinit exynos_tmu_probe(struct platform_device *pdev) exynos_tmu_control(pdev, true); + /* Register the sensor with thermal management interface */ + (&exynos_sensor_conf)->private_data = data; + exynos_sensor_conf.trip_data.trip_count = pdata->trigger_level0_en + + pdata->trigger_level1_en + pdata->trigger_level2_en + + pdata->trigger_level3_en; + + for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++) + exynos_sensor_conf.trip_data.trip_val[i] = + pdata->threshold + pdata->trigger_levels[i]; + + exynos_sensor_conf.cooling_data.freq_clip_count = + pdata->freq_tab_count; + for (i = 0; i < pdata->freq_tab_count; i++) { + exynos_sensor_conf.cooling_data.freq_data[i].freq_clip_max = + pdata->freq_tab[i].freq_clip_max; + exynos_sensor_conf.cooling_data.freq_data[i].temp_level = + pdata->freq_tab[i].temp_level; + } + + ret = exynos_register_thermal(&exynos_sensor_conf); + if (ret) { + dev_err(&pdev->dev, "Failed to register thermal interface\n"); + goto err_clk; + } return 0; err_clk: platform_set_drvdata(pdev, NULL); @@ -453,6 +853,8 @@ static int __devexit exynos_tmu_remove(struct platform_device *pdev) exynos_tmu_control(pdev, false); + exynos_unregister_thermal(); + clk_put(data->clk); free_irq(data->irq, data); diff --git a/include/linux/platform_data/exynos_thermal.h b/include/linux/platform_data/exynos_thermal.h index a9e960aaf987..a7bdb2f63b73 100644 --- a/include/linux/platform_data/exynos_thermal.h +++ b/include/linux/platform_data/exynos_thermal.h @@ -21,6 +21,7 @@ #ifndef _LINUX_EXYNOS_THERMAL_H #define _LINUX_EXYNOS_THERMAL_H +#include enum calibration_type { TYPE_ONE_POINT_TRIMMING, @@ -32,6 +33,22 @@ enum soc_type { SOC_ARCH_EXYNOS4210 = 1, SOC_ARCH_EXYNOS, }; +/** + * struct freq_clip_table + * @freq_clip_max: maximum frequency allowed for this cooling state. + * @temp_level: Temperature level at which the temperature clipping will + * happen. + * @mask_val: cpumask of the allowed cpu's where the clipping will take place. + * + * This structure is required to be filled and passed to the + * cpufreq_cooling_unregister function. + */ +struct freq_clip_table { + unsigned int freq_clip_max; + unsigned int temp_level; + const struct cpumask *mask_val; +}; + /** * struct exynos_tmu_platform_data * @threshold: basic temperature for generating interrupt @@ -72,6 +89,9 @@ enum soc_type { * @type: determines the type of SOC * @efuse_value: platform defined fuse value * @cal_type: calibration type for temperature + * @freq_clip_table: Table representing frequency reduction percentage. + * @freq_tab_count: Count of the above table as frequency reduction may + * applicable to only some of the trigger levels. * * This structure is required for configuration of exynos_tmu driver. */ @@ -90,5 +110,7 @@ struct exynos_tmu_platform_data { enum calibration_type cal_type; enum soc_type type; + struct freq_clip_table freq_tab[4]; + unsigned int freq_tab_count; }; #endif /* _LINUX_EXYNOS_THERMAL_H */ From 17be868e04a1b98d72756ce7b51a95d03e7df49b Mon Sep 17 00:00:00 2001 From: Amit Daniel Kachhap Date: Thu, 16 Aug 2012 17:11:44 +0530 Subject: [PATCH 22/30] ARM: exynos: add thermal sensor driver platform data support Add necessary default platform data support needed for TMU driver. The supplied dt/non-dt values are tested for origen exynos4210 and smdk exynos5250 platforms and only compile tested for exynos4412. Signed-off-by: Amit Daniel Kachhap Acked-by: Guenter Roeck Cc: SangWook Ju Cc: Durgadoss Cc: Len Brown Cc: Jean Delvare Cc: jonghwa lee Cc: Kyungmin Park Cc: Kukjin Kim Signed-off-by: Andrew Morton Signed-off-by: Amit Daniel Kachhap Signed-off-by: Zhang Rui --- drivers/thermal/exynos_thermal.c | 111 ++++++++++++++++++++++++++++++- 1 file changed, 110 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c index e79cdc9935b7..03a99e444dbd 100644 --- a/drivers/thermal/exynos_thermal.c +++ b/drivers/thermal/exynos_thermal.c @@ -723,14 +723,121 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id) static struct thermal_sensor_conf exynos_sensor_conf = { .name = "exynos-therm", .read_temperature = (int (*)(void *))exynos_tmu_read, +}; + +#if defined(CONFIG_CPU_EXYNOS4210) +static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = { + .threshold = 80, + .trigger_levels[0] = 5, + .trigger_levels[1] = 20, + .trigger_levels[2] = 30, + .trigger_level0_en = 1, + .trigger_level1_en = 1, + .trigger_level2_en = 1, + .trigger_level3_en = 0, + .gain = 15, + .reference_voltage = 7, + .cal_type = TYPE_ONE_POINT_TRIMMING, + .freq_tab[0] = { + .freq_clip_max = 800 * 1000, + .temp_level = 85, + }, + .freq_tab[1] = { + .freq_clip_max = 200 * 1000, + .temp_level = 100, + }, + .freq_tab_count = 2, + .type = SOC_ARCH_EXYNOS4210, +}; +#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data) +#else +#define EXYNOS4210_TMU_DRV_DATA (NULL) +#endif + +#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412) +static struct exynos_tmu_platform_data const exynos_default_tmu_data = { + .trigger_levels[0] = 85, + .trigger_levels[1] = 103, + .trigger_levels[2] = 110, + .trigger_level0_en = 1, + .trigger_level1_en = 1, + .trigger_level2_en = 1, + .trigger_level3_en = 0, + .gain = 8, + .reference_voltage = 16, + .noise_cancel_mode = 4, + .cal_type = TYPE_ONE_POINT_TRIMMING, + .efuse_value = 55, + .freq_tab[0] = { + .freq_clip_max = 800 * 1000, + .temp_level = 85, + }, + .freq_tab[1] = { + .freq_clip_max = 200 * 1000, + .temp_level = 103, + }, + .freq_tab_count = 2, + .type = SOC_ARCH_EXYNOS, +}; +#define EXYNOS_TMU_DRV_DATA (&exynos_default_tmu_data) +#else +#define EXYNOS_TMU_DRV_DATA (NULL) +#endif + +#ifdef CONFIG_OF +static const struct of_device_id exynos_tmu_match[] = { + { + .compatible = "samsung,exynos4210-tmu", + .data = (void *)EXYNOS4210_TMU_DRV_DATA, + }, + { + .compatible = "samsung,exynos5250-tmu", + .data = (void *)EXYNOS_TMU_DRV_DATA, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, exynos_tmu_match); +#else +#define exynos_tmu_match NULL +#endif + +static struct platform_device_id exynos_tmu_driver_ids[] = { + { + .name = "exynos4210-tmu", + .driver_data = (kernel_ulong_t)EXYNOS4210_TMU_DRV_DATA, + }, + { + .name = "exynos5250-tmu", + .driver_data = (kernel_ulong_t)EXYNOS_TMU_DRV_DATA, + }, + { }, +}; +MODULE_DEVICE_TABLE(platform, exynos4_tmu_driver_ids); + +static inline struct exynos_tmu_platform_data *exynos_get_driver_data( + struct platform_device *pdev) +{ +#ifdef CONFIG_OF + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(exynos_tmu_match, pdev->dev.of_node); + if (!match) + return NULL; + return (struct exynos_tmu_platform_data *) match->data; + } +#endif + return (struct exynos_tmu_platform_data *) + platform_get_device_id(pdev)->driver_data; } -; static int __devinit exynos_tmu_probe(struct platform_device *pdev) { struct exynos_tmu_data *data; struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data; int ret, i; + if (!pdata) + pdata = exynos_get_driver_data(pdev); + if (!pdata) { dev_err(&pdev->dev, "No platform init data supplied.\n"); return -ENODEV; @@ -899,9 +1006,11 @@ static struct platform_driver exynos_tmu_driver = { .name = "exynos-tmu", .owner = THIS_MODULE, .pm = EXYNOS_TMU_PM, + .of_match_table = exynos_tmu_match, }, .probe = exynos_tmu_probe, .remove = __devexit_p(exynos_tmu_remove), + .id_table = exynos_tmu_driver_ids, }; module_platform_driver(exynos_tmu_driver); From 79e093c3fe9de9fe0743a53e4809f481d2719060 Mon Sep 17 00:00:00 2001 From: Amit Daniel Kachhap Date: Thu, 16 Aug 2012 05:41:45 -0600 Subject: [PATCH 23/30] thermal: exynos: Use devm_* functions devm_* functions are used to replace kzalloc, request_mem_region, ioremap and request_irq functions in probe call. With the usage of devm_* functions explicit freeing and unmapping is not required. Signed-off-by: Sachin Kamat Signed-off-by: Sachin Kamat Signed-off-by: Amit Daniel Kachhap Signed-off-by: Zhang Rui --- drivers/thermal/exynos_thermal.c | 45 +++++++------------------------- 1 file changed, 9 insertions(+), 36 deletions(-) diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c index 03a99e444dbd..e84acde9e0bf 100644 --- a/drivers/thermal/exynos_thermal.c +++ b/drivers/thermal/exynos_thermal.c @@ -842,7 +842,8 @@ static int __devinit exynos_tmu_probe(struct platform_device *pdev) dev_err(&pdev->dev, "No platform init data supplied.\n"); return -ENODEV; } - data = kzalloc(sizeof(struct exynos_tmu_data), GFP_KERNEL); + data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data), + GFP_KERNEL); if (!data) { dev_err(&pdev->dev, "Failed to allocate driver structure\n"); return -ENOMEM; @@ -850,47 +851,35 @@ static int __devinit exynos_tmu_probe(struct platform_device *pdev) data->irq = platform_get_irq(pdev, 0); if (data->irq < 0) { - ret = data->irq; dev_err(&pdev->dev, "Failed to get platform irq\n"); - goto err_free; + return data->irq; } INIT_WORK(&data->irq_work, exynos_tmu_work); data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!data->mem) { - ret = -ENOENT; dev_err(&pdev->dev, "Failed to get platform resource\n"); - goto err_free; + return -ENOENT; } - data->mem = request_mem_region(data->mem->start, - resource_size(data->mem), pdev->name); - if (!data->mem) { - ret = -ENODEV; - dev_err(&pdev->dev, "Failed to request memory region\n"); - goto err_free; - } - - data->base = ioremap(data->mem->start, resource_size(data->mem)); + data->base = devm_request_and_ioremap(&pdev->dev, data->mem); if (!data->base) { - ret = -ENODEV; dev_err(&pdev->dev, "Failed to ioremap memory\n"); - goto err_mem_region; + return -ENODEV; } - ret = request_irq(data->irq, exynos_tmu_irq, + ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq, IRQF_TRIGGER_RISING, "exynos-tmu", data); if (ret) { dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); - goto err_io_remap; + return ret; } data->clk = clk_get(NULL, "tmu_apbif"); if (IS_ERR(data->clk)) { - ret = PTR_ERR(data->clk); dev_err(&pdev->dev, "Failed to get clock\n"); - goto err_irq; + return PTR_ERR(data->clk); } if (pdata->type == SOC_ARCH_EXYNOS || @@ -942,15 +931,6 @@ static int __devinit exynos_tmu_probe(struct platform_device *pdev) err_clk: platform_set_drvdata(pdev, NULL); clk_put(data->clk); -err_irq: - free_irq(data->irq, data); -err_io_remap: - iounmap(data->base); -err_mem_region: - release_mem_region(data->mem->start, resource_size(data->mem)); -err_free: - kfree(data); - return ret; } @@ -964,15 +944,8 @@ static int __devexit exynos_tmu_remove(struct platform_device *pdev) clk_put(data->clk); - free_irq(data->irq, data); - - iounmap(data->base); - release_mem_region(data->mem->start, resource_size(data->mem)); - platform_set_drvdata(pdev, NULL); - kfree(data); - return 0; } From a4b6fec977020a508ff04b05f0fa01221a4ecf29 Mon Sep 17 00:00:00 2001 From: Jonghwa Lee Date: Wed, 26 Sep 2012 09:43:31 +0900 Subject: [PATCH 24/30] Thermal: Fix bug on cpu_cooling, cooling device's id conflict problem. This patch fixes small bug on cpu_cooling. CPU cooling device has own id generated with idr mathod. However in the previous version, it swapped to all same id at last stage of probing as 0. This makes id's collision and also occures error when it releases that id. Signed-off-by: Jonghwa Lee --- drivers/thermal/cpu_cooling.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 99a5d7551b33..9050c1b0573c 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -351,7 +351,7 @@ struct thermal_cooling_device *cpufreq_cooling_register( struct cpufreq_cooling_device *cpufreq_dev = NULL; unsigned int cpufreq_dev_count = 0, min = 0, max = 0; char dev_name[THERMAL_NAME_LENGTH]; - int ret = 0, id = 0, i; + int ret = 0, i; struct cpufreq_policy policy; list_for_each_entry(cpufreq_dev, &cooling_cpufreq_list, node) @@ -396,7 +396,6 @@ struct thermal_cooling_device *cpufreq_cooling_register( kfree(cpufreq_dev); return ERR_PTR(-EINVAL); } - cpufreq_dev->id = id; cpufreq_dev->cool_dev = cool_dev; cpufreq_dev->cpufreq_state = 0; mutex_lock(&cooling_cpufreq_lock); From c072fed95c9855a920c114d7fa3351f0f54ea06e Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 27 Sep 2012 16:20:38 +0530 Subject: [PATCH 25/30] thermal: Exynos: Fix NULL pointer dereference in exynos_unregister_thermal() exynos_unregister_thermal() is functional only when 'th_zone' is not NULL (ensured by the NULL checks). However, in the event it is NULL, it gets dereferenced in the for loop. This patch fixes this issue. Signed-off-by: Sachin Kamat --- drivers/thermal/exynos_thermal.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c index e84acde9e0bf..fd03e8581afc 100644 --- a/drivers/thermal/exynos_thermal.c +++ b/drivers/thermal/exynos_thermal.c @@ -475,11 +475,14 @@ static void exynos_unregister_thermal(void) { int i; - if (th_zone && th_zone->therm_dev) + if (!th_zone) + return; + + if (th_zone->therm_dev) thermal_zone_device_unregister(th_zone->therm_dev); for (i = 0; i < th_zone->cool_dev_size; i++) { - if (th_zone && th_zone->cool_dev[i]) + if (th_zone->cool_dev[i]) cpufreq_cooling_unregister(th_zone->cool_dev[i]); } From a520d52e99b14ba7db135e916348f12f2a6e09be Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Fri, 28 Sep 2012 15:22:00 +0800 Subject: [PATCH 26/30] ACPI: EC: Make the GPE storm threshold a module parameter The Linux EC driver includes a mechanism to detect GPE storms, and switch from interrupt-mode to polling mode. However, polling mode sometimes doesn't work, so the workaround is problematic. Also, different systems seem to need the threshold for detecting the GPE storm at different levels. ACPI_EC_STORM_THRESHOLD was initially 20 when it's created, and was changed to 8 in 2.6.28 commit 06cf7d3c7 "ACPI: EC: lower interrupt storm threshold" to fix kernel bug 11892 by forcing the laptop in that bug to work in polling mode. However in bug 45151, it works fine in interrupt mode if we lift the threshold back to 20. This patch makes the threshold a module parameter so that user has a flexible option to debug/workaround this issue. The default is unchanged. This is also a preparation patch to fix specific systems: https://bugzilla.kernel.org/show_bug.cgi?id=45151 Signed-off-by: Feng Tang Signed-off-by: Len Brown cc: stable@vger.kernel.org --- drivers/acpi/ec.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 7edaccce6640..615264c89c31 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -71,9 +71,6 @@ enum ec_command { #define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */ #define ACPI_EC_MSI_UDELAY 550 /* Wait 550us for MSI EC */ -#define ACPI_EC_STORM_THRESHOLD 8 /* number of false interrupts - per one transaction */ - enum { EC_FLAGS_QUERY_PENDING, /* Query is pending */ EC_FLAGS_GPE_STORM, /* GPE storm detected */ @@ -87,6 +84,15 @@ static unsigned int ec_delay __read_mostly = ACPI_EC_DELAY; module_param(ec_delay, uint, 0644); MODULE_PARM_DESC(ec_delay, "Timeout(ms) waited until an EC command completes"); +/* + * If the number of false interrupts per one transaction exceeds + * this threshold, will think there is a GPE storm happened and + * will disable the GPE for normal transaction. + */ +static unsigned int ec_storm_threshold __read_mostly = 8; +module_param(ec_storm_threshold, uint, 0644); +MODULE_PARM_DESC(ec_storm_threshold, "Maxim false GPE numbers not considered as GPE storm"); + /* If we find an EC via the ECDT, we need to keep a ptr to its context */ /* External interfaces use first EC only, so remember */ typedef int (*acpi_ec_query_func) (void *data); @@ -319,7 +325,7 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) msleep(1); /* It is safe to enable the GPE outside of the transaction. */ acpi_enable_gpe(NULL, ec->gpe); - } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) { + } else if (t->irq_count > ec_storm_threshold) { pr_info(PREFIX "GPE storm detected, " "transactions will use polling mode\n"); set_bit(EC_FLAGS_GPE_STORM, &ec->flags); From 67bfa9b60bd689601554526d144b21d529f78a09 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Fri, 28 Sep 2012 15:22:01 +0800 Subject: [PATCH 27/30] ACPI: EC: Add a quirk for CLEVO M720T/M730T laptop By enlarging the GPE storm threshold back to 20, that laptop's EC works fine with interrupt mode instead of polling mode. https://bugzilla.kernel.org/show_bug.cgi?id=45151 Reported-and-Tested-by: Francesco Signed-off-by: Feng Tang Signed-off-by: Len Brown cc: stable@vger.kernel.org --- drivers/acpi/ec.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 615264c89c31..a51df9681319 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -930,6 +930,17 @@ static int ec_flag_msi(const struct dmi_system_id *id) return 0; } +/* + * Clevo M720 notebook actually works ok with IRQ mode, if we lifted + * the GPE storm threshold back to 20 + */ +static int ec_enlarge_storm_threshold(const struct dmi_system_id *id) +{ + pr_debug("Setting the EC GPE storm threshold to 20\n"); + ec_storm_threshold = 20; + return 0; +} + static struct dmi_system_id __initdata ec_dmi_table[] = { { ec_skip_dsdt_scan, "Compal JFL92", { @@ -961,10 +972,13 @@ static struct dmi_system_id __initdata ec_dmi_table[] = { { ec_validate_ecdt, "ASUS hardware", { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer Inc.") }, NULL}, + { + ec_enlarge_storm_threshold, "CLEVO hardware", { + DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."), + DMI_MATCH(DMI_PRODUCT_NAME, "M720T/M730T"),}, NULL}, {}, }; - int __init acpi_ec_ecdt_probe(void) { acpi_status status; From e8b1b59dc8e42a47c4ce541bd1767ffac206b29c Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 8 Oct 2012 08:40:42 +0800 Subject: [PATCH 28/30] cpuidle / ACPI: fix potential NULL pointer dereference The dereference should be moved below the NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 3655ab923812..e8086c725305 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -1132,7 +1132,7 @@ static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr) int acpi_processor_hotplug(struct acpi_processor *pr) { int ret = 0; - struct cpuidle_device *dev = per_cpu(acpi_cpuidle_device, pr->id); + struct cpuidle_device *dev; if (disabled_by_idle_boot_param()) return 0; @@ -1147,6 +1147,7 @@ int acpi_processor_hotplug(struct acpi_processor *pr) if (!pr->flags.power_setup_done) return -ENODEV; + dev = per_cpu(acpi_cpuidle_device, pr->id); cpuidle_pause_and_lock(); cpuidle_disable_device(dev); acpi_processor_get_power_info(pr); From cf31cd1a0c692a1445c80756055875088fa29982 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Mon, 8 Oct 2012 13:43:08 +0530 Subject: [PATCH 29/30] ACPI idle, CPU hotplug: Fix NULL pointer dereference during hotplug On a KVM guest, when a CPU is taken offline and brought back online, we hit the following NULL pointer dereference: [ 45.400843] Unregister pv shared memory for cpu 1 [ 45.412331] smpboot: CPU 1 is now offline [ 45.529894] SMP alternatives: lockdep: fixing up alternatives [ 45.533472] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 45.411526] kvm-clock: cpu 1, msr 0:7d14601, secondary cpu clock [ 45.571370] KVM setup async PF for cpu 1 [ 45.572331] kvm-stealtime: cpu 1, msr 7d0e040 [ 45.575031] BUG: unable to handle kernel NULL pointer dereference at (null) [ 45.576017] IP: [] cpuidle_disable_device+0x18/0x80 [ 45.576017] PGD 5dfb067 PUD 5da8067 PMD 0 [ 45.576017] Oops: 0000 [#1] SMP [ 45.576017] Modules linked in: [ 45.576017] CPU 0 [ 45.576017] Pid: 607, comm: stress_cpu_hotp Not tainted 3.6.0-padata-tp-debug #3 Bochs Bochs [ 45.576017] RIP: 0010:[] [] cpuidle_disable_device+0x18/0x80 [ 45.576017] RSP: 0018:ffff880005d93ce8 EFLAGS: 00010286 [ 45.576017] RAX: ffff880005d93fd8 RBX: 0000000000000000 RCX: 0000000000000006 [ 45.576017] RDX: 0000000000000006 RSI: 2222222222222222 RDI: 0000000000000000 [ 45.576017] RBP: ffff880005d93cf8 R08: 2222222222222222 R09: 2222222222222222 [ 45.576017] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 45.576017] R13: 0000000000000000 R14: ffffffff81c8cca0 R15: 0000000000000001 [ 45.576017] FS: 00007f91936ae700(0000) GS:ffff880007c00000(0000) knlGS:0000000000000000 [ 45.576017] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 45.576017] CR2: 0000000000000000 CR3: 0000000005db3000 CR4: 00000000000006f0 [ 45.576017] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 45.576017] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 45.576017] Process stress_cpu_hotp (pid: 607, threadinfo ffff880005d92000, task ffff8800066bbf40) [ 45.576017] Stack: [ 45.576017] ffff880007a96400 0000000000000000 ffff880005d93d28 ffffffff813ac689 [ 45.576017] ffff880007a96400 ffff880007a96400 0000000000000002 ffffffff81cd8d01 [ 45.576017] ffff880005d93d58 ffffffff813aa498 0000000000000001 00000000ffffffdd [ 45.576017] Call Trace: [ 45.576017] [] acpi_processor_hotplug+0x55/0x97 [ 45.576017] [] acpi_cpu_soft_notify+0x93/0xce [ 45.576017] [] notifier_call_chain+0x5d/0x110 [ 45.576017] [] __raw_notifier_call_chain+0xe/0x10 [ 45.576017] [] __cpu_notify+0x20/0x40 [ 45.576017] [] cpu_notify+0x15/0x20 [ 45.576017] [] _cpu_up+0xee/0x137 [ 45.576017] [] cpu_up+0x49/0x59 [ 45.576017] [] store_online+0x9d/0xe0 [ 45.576017] [] dev_attr_store+0x18/0x30 [ 45.576017] [] sysfs_write_file+0xe0/0x150 [ 45.576017] [] vfs_write+0xac/0x180 [ 45.576017] [] sys_write+0x52/0xa0 [ 45.576017] [] system_call_fastpath+0x16/0x1b [ 45.576017] Code: 48 c7 c7 40 e5 ca 81 e8 07 d0 18 00 5d c3 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 10 48 89 5d f0 4c 89 65 f8 48 89 fb 07 02 75 13 48 8b 5d f0 4c 8b 65 f8 c9 c3 66 0f 1f 84 00 00 [ 45.576017] RIP [] cpuidle_disable_device+0x18/0x80 [ 45.576017] RSP [ 45.576017] CR2: 0000000000000000 [ 45.656079] ---[ end trace 433d6c9ac0b02cef ]--- Analysis: Commit 3d339dc (cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure()) made the allocation of the dev structure (struct cpuidle) of a CPU dynamic, whereas previously it was statically allocated. And this dynamic allocation occurs in acpi_processor_power_init() if pr->flags.power evaluates to non-zero. On KVM guests, pr->flags.power evaluates to zero, hence dev is never allocated. This causes the NULL pointer (dev) dereference in cpuidle_disable_device() during a subsequent CPU online operation. Fix this by ensuring that dev is non-NULL before dereferencing. Signed-off-by: Srivatsa S. Bhat Signed-off-by: Len Brown --- drivers/cpuidle/cpuidle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index e28f6ea46f1a..7f15b8514a18 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -368,7 +368,7 @@ EXPORT_SYMBOL_GPL(cpuidle_enable_device); */ void cpuidle_disable_device(struct cpuidle_device *dev) { - if (!dev->enabled) + if (!dev || !dev->enabled) return; if (!cpuidle_get_driver() || !cpuidle_curr_governor) return; From 4084a9b99ccd05bf5e13dcd248e3b56a682fa4d6 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 8 Oct 2012 20:31:08 +0800 Subject: [PATCH 30/30] tools/power/acpi/acpidump: remove duplicated include from acpidump.c Remove duplicated include. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Len Brown --- tools/power/acpi/acpidump.c | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/power/acpi/acpidump.c b/tools/power/acpi/acpidump.c index 07779871421c..a84553a0e0df 100644 --- a/tools/power/acpi/acpidump.c +++ b/tools/power/acpi/acpidump.c @@ -62,7 +62,6 @@ typedef long long s64; #include #include -#include #include #include