mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-17 07:36:50 +07:00
dt-bindings: arm: l2x0: Convert L2 cache to json-schema
Convert the ARM L2 cache controller binding to json-schema. Signed-off-by: Rob Herring <robh@kernel.org>
This commit is contained in:
Rob Herring
parent
42e45a9449
commit
a2b9564637
@ -1,114 +0,0 @@
|
||||
* ARM L2 Cache Controller
|
||||
|
||||
ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/PL220/
|
||||
PL310 and variants) based level 2 cache controller. All these various implementations
|
||||
of the L2 cache controller have compatible programming models (Note 1).
|
||||
Some of the properties that are just prefixed "cache-*" are taken from section
|
||||
3.7.3 of the Devicetree Specification which can be found at:
|
||||
https://www.devicetree.org/specifications/
|
||||
|
||||
The ARM L2 cache representation in the device tree should be done as follows:
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : should be one of:
|
||||
"arm,pl310-cache"
|
||||
"arm,l220-cache"
|
||||
"arm,l210-cache"
|
||||
"bcm,bcm11351-a2-pl310-cache": DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
|
||||
"brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an
|
||||
offset needs to be added to the address before passing down to the L2
|
||||
cache controller
|
||||
"marvell,aurora-system-cache": Marvell Controller designed to be
|
||||
compatible with the ARM one, with system cache mode (meaning
|
||||
maintenance operations on L1 are broadcasted to the L2 and L2
|
||||
performs the same operation).
|
||||
"marvell,aurora-outer-cache": Marvell Controller designed to be
|
||||
compatible with the ARM one with outer cache mode.
|
||||
"marvell,tauros3-cache": Marvell Tauros3 cache controller, compatible
|
||||
with arm,pl310-cache controller.
|
||||
- cache-unified : Specifies the cache is a unified cache.
|
||||
- cache-level : Should be set to 2 for a level 2 cache.
|
||||
- reg : Physical base address and size of cache controller's memory mapped
|
||||
registers.
|
||||
|
||||
Optional properties:
|
||||
|
||||
- arm,data-latency : Cycles of latency for Data RAM accesses. Specifies 3 cells of
|
||||
read, write and setup latencies. Minimum valid values are 1. Controllers
|
||||
without setup latency control should use a value of 0.
|
||||
- arm,tag-latency : Cycles of latency for Tag RAM accesses. Specifies 3 cells of
|
||||
read, write and setup latencies. Controllers without setup latency control
|
||||
should use 0. Controllers without separate read and write Tag RAM latency
|
||||
values should only use the first cell.
|
||||
- arm,dirty-latency : Cycles of latency for Dirty RAMs. This is a single cell.
|
||||
- arm,filter-ranges : <start length> Starting address and length of window to
|
||||
filter. Addresses in the filter window are directed to the M1 port. Other
|
||||
addresses will go to the M0 port.
|
||||
- arm,io-coherent : indicates that the system is operating in an hardware
|
||||
I/O coherent mode. Valid only when the arm,pl310-cache compatible
|
||||
string is used.
|
||||
- interrupts : 1 combined interrupt.
|
||||
- cache-size : specifies the size in bytes of the cache
|
||||
- cache-sets : specifies the number of associativity sets of the cache
|
||||
- cache-block-size : specifies the size in bytes of a cache block
|
||||
- cache-line-size : specifies the size in bytes of a line in the cache,
|
||||
if this is not specified, the line size is assumed to be equal to the
|
||||
cache block size
|
||||
- cache-id-part: cache id part number to be used if it is not present
|
||||
on hardware
|
||||
- wt-override: If present then L2 is forced to Write through mode
|
||||
- arm,double-linefill : Override double linefill enable setting. Enable if
|
||||
non-zero, disable if zero.
|
||||
- arm,double-linefill-incr : Override double linefill on INCR read. Enable
|
||||
if non-zero, disable if zero.
|
||||
- arm,double-linefill-wrap : Override double linefill on WRAP read. Enable
|
||||
if non-zero, disable if zero.
|
||||
- arm,prefetch-drop : Override prefetch drop enable setting. Enable if non-zero,
|
||||
disable if zero.
|
||||
- arm,prefetch-offset : Override prefetch offset value. Valid values are
|
||||
0-7, 15, 23, and 31.
|
||||
- arm,shared-override : The default behavior of the L220 or PL310 cache
|
||||
controllers with respect to the shareable attribute is to transform "normal
|
||||
memory non-cacheable transactions" into "cacheable no allocate" (for reads)
|
||||
or "write through no write allocate" (for writes).
|
||||
On systems where this may cause DMA buffer corruption, this property must be
|
||||
specified to indicate that such transforms are precluded.
|
||||
- arm,parity-enable : enable parity checking on the L2 cache (L220 or PL310).
|
||||
- arm,parity-disable : disable parity checking on the L2 cache (L220 or PL310).
|
||||
- arm,outer-sync-disable : disable the outer sync operation on the L2 cache.
|
||||
Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that
|
||||
will randomly hang unless outer sync operations are disabled.
|
||||
- prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1>
|
||||
(forcibly enable), property absent (retain settings set by firmware)
|
||||
- prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable),
|
||||
<1> (forcibly enable), property absent (retain settings set by
|
||||
firmware)
|
||||
- arm,dynamic-clock-gating : L2 dynamic clock gating. Value: <0> (forcibly
|
||||
disable), <1> (forcibly enable), property absent (OS specific behavior,
|
||||
preferably retain firmware settings)
|
||||
- arm,standby-mode: L2 standby mode enable. Value <0> (forcibly disable),
|
||||
<1> (forcibly enable), property absent (OS specific behavior,
|
||||
preferably retain firmware settings)
|
||||
- arm,early-bresp-disable : Disable the CA9 optimization Early BRESP (PL310)
|
||||
- arm,full-line-zero-disable : Disable the CA9 optimization Full line of zero
|
||||
write (PL310)
|
||||
|
||||
Example:
|
||||
|
||||
L2: cache-controller {
|
||||
compatible = "arm,pl310-cache";
|
||||
reg = <0xfff12000 0x1000>;
|
||||
arm,data-latency = <1 1 1>;
|
||||
arm,tag-latency = <2 2 2>;
|
||||
arm,filter-ranges = <0x80000000 0x8000000>;
|
||||
cache-unified;
|
||||
cache-level = <2>;
|
||||
interrupts = <45>;
|
||||
};
|
||||
|
||||
Note 1: The description in this document doesn't apply to integrated L2
|
||||
cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These
|
||||
integrated L2 controllers are assumed to be all preconfigured by
|
||||
early secure boot code. Thus no need to deal with their configuration
|
||||
in the kernel at all.
|
||||
248
Documentation/devicetree/bindings/arm/l2c2x0.yaml
Normal file
248
Documentation/devicetree/bindings/arm/l2c2x0.yaml
Normal file
@ -0,0 +1,248 @@
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/arm/l2c2x0.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: ARM L2 Cache Controller
|
||||
|
||||
maintainers:
|
||||
- Rob Herring <robh@kernel.org>
|
||||
|
||||
description: |+
|
||||
ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/
|
||||
PL220/PL310 and variants) based level 2 cache controller. All these various
|
||||
implementations of the L2 cache controller have compatible programming
|
||||
models (Note 1). Some of the properties that are just prefixed "cache-*" are
|
||||
taken from section 3.7.3 of the Devicetree Specification which can be found
|
||||
at:
|
||||
https://www.devicetree.org/specifications/
|
||||
|
||||
Note 1: The description in this document doesn't apply to integrated L2
|
||||
cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These
|
||||
integrated L2 controllers are assumed to be all preconfigured by
|
||||
early secure boot code. Thus no need to deal with their configuration
|
||||
in the kernel at all.
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/cache-controller.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- arm,pl310-cache
|
||||
- arm,l220-cache
|
||||
- arm,l210-cache
|
||||
# DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
|
||||
- bcm,bcm11351-a2-pl310-cache
|
||||
# For Broadcom bcm11351 chipset where an
|
||||
# offset needs to be added to the address before passing down to the L2
|
||||
# cache controller
|
||||
- brcm,bcm11351-a2-pl310-cache
|
||||
# Marvell Controller designed to be
|
||||
# compatible with the ARM one, with system cache mode (meaning
|
||||
# maintenance operations on L1 are broadcasted to the L2 and L2
|
||||
# performs the same operation).
|
||||
- marvell,aurora-system-cache
|
||||
# Marvell Controller designed to be
|
||||
# compatible with the ARM one with outer cache mode.
|
||||
- marvell,aurora-outer-cache
|
||||
# Marvell Tauros3 cache controller, compatible
|
||||
# with arm,pl310-cache controller.
|
||||
- marvell,tauros3-cache
|
||||
|
||||
cache-level:
|
||||
const: 2
|
||||
|
||||
cache-unified: true
|
||||
cache-size: true
|
||||
cache-sets: true
|
||||
cache-block-size: true
|
||||
cache-line-size: true
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
arm,data-latency:
|
||||
description: Cycles of latency for Data RAM accesses. Specifies 3 cells of
|
||||
read, write and setup latencies. Minimum valid values are 1. Controllers
|
||||
without setup latency control should use a value of 0.
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
- minItems: 2
|
||||
maxItems: 3
|
||||
items:
|
||||
minimum: 0
|
||||
maximum: 8
|
||||
|
||||
arm,tag-latency:
|
||||
description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of
|
||||
read, write and setup latencies. Controllers without setup latency control
|
||||
should use 0. Controllers without separate read and write Tag RAM latency
|
||||
values should only use the first cell.
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
- minItems: 1
|
||||
maxItems: 3
|
||||
items:
|
||||
minimum: 0
|
||||
maximum: 8
|
||||
|
||||
arm,dirty-latency:
|
||||
description: Cycles of latency for Dirty RAMs. This is a single cell.
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32
|
||||
- minimum: 1
|
||||
maximum: 8
|
||||
|
||||
arm,filter-ranges:
|
||||
description: <start length> Starting address and length of window to
|
||||
filter. Addresses in the filter window are directed to the M1 port. Other
|
||||
addresses will go to the M0 port.
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
- items:
|
||||
minItems: 2
|
||||
maxItems: 2
|
||||
|
||||
arm,io-coherent:
|
||||
description: indicates that the system is operating in an hardware
|
||||
I/O coherent mode. Valid only when the arm,pl310-cache compatible
|
||||
string is used.
|
||||
type: boolean
|
||||
|
||||
interrupts:
|
||||
# Either a single combined interrupt or up to 9 individual interrupts
|
||||
minItems: 1
|
||||
maxItems: 9
|
||||
|
||||
cache-id-part:
|
||||
description: cache id part number to be used if it is not present
|
||||
on hardware
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
wt-override:
|
||||
description: If present then L2 is forced to Write through mode
|
||||
type: boolean
|
||||
|
||||
arm,double-linefill:
|
||||
description: Override double linefill enable setting. Enable if
|
||||
non-zero, disable if zero.
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32
|
||||
- enum: [ 0, 1 ]
|
||||
|
||||
arm,double-linefill-incr:
|
||||
description: Override double linefill on INCR read. Enable
|
||||
if non-zero, disable if zero.
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32
|
||||
- enum: [ 0, 1 ]
|
||||
|
||||
arm,double-linefill-wrap:
|
||||
description: Override double linefill on WRAP read. Enable
|
||||
if non-zero, disable if zero.
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32
|
||||
- enum: [ 0, 1 ]
|
||||
|
||||
arm,prefetch-drop:
|
||||
description: Override prefetch drop enable setting. Enable if non-zero,
|
||||
disable if zero.
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32
|
||||
- enum: [ 0, 1 ]
|
||||
|
||||
arm,prefetch-offset:
|
||||
description: Override prefetch offset value.
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32
|
||||
- enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31 ]
|
||||
|
||||
arm,shared-override:
|
||||
description: The default behavior of the L220 or PL310 cache
|
||||
controllers with respect to the shareable attribute is to transform "normal
|
||||
memory non-cacheable transactions" into "cacheable no allocate" (for reads)
|
||||
or "write through no write allocate" (for writes).
|
||||
On systems where this may cause DMA buffer corruption, this property must
|
||||
be specified to indicate that such transforms are precluded.
|
||||
type: boolean
|
||||
|
||||
arm,parity-enable:
|
||||
description: enable parity checking on the L2 cache (L220 or PL310).
|
||||
type: boolean
|
||||
|
||||
arm,parity-disable:
|
||||
description: disable parity checking on the L2 cache (L220 or PL310).
|
||||
type: boolean
|
||||
|
||||
arm,outer-sync-disable:
|
||||
description: disable the outer sync operation on the L2 cache.
|
||||
Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that
|
||||
will randomly hang unless outer sync operations are disabled.
|
||||
type: boolean
|
||||
|
||||
prefetch-data:
|
||||
description: |
|
||||
Data prefetch. Value: <0> (forcibly disable), <1>
|
||||
(forcibly enable), property absent (retain settings set by firmware)
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32
|
||||
- enum: [ 0, 1 ]
|
||||
|
||||
prefetch-instr:
|
||||
description: |
|
||||
Instruction prefetch. Value: <0> (forcibly disable),
|
||||
<1> (forcibly enable), property absent (retain settings set by
|
||||
firmware)
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32
|
||||
- enum: [ 0, 1 ]
|
||||
|
||||
arm,dynamic-clock-gating:
|
||||
description: |
|
||||
L2 dynamic clock gating. Value: <0> (forcibly
|
||||
disable), <1> (forcibly enable), property absent (OS specific behavior,
|
||||
preferably retain firmware settings)
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32
|
||||
- enum: [ 0, 1 ]
|
||||
|
||||
arm,standby-mode:
|
||||
description: L2 standby mode enable. Value <0> (forcibly disable),
|
||||
<1> (forcibly enable), property absent (OS specific behavior,
|
||||
preferably retain firmware settings)
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32
|
||||
- enum: [ 0, 1 ]
|
||||
|
||||
arm,early-bresp-disable:
|
||||
description: Disable the CA9 optimization Early BRESP (PL310)
|
||||
type: boolean
|
||||
|
||||
arm,full-line-zero-disable:
|
||||
description: Disable the CA9 optimization Full line of zero
|
||||
write (PL310)
|
||||
type: boolean
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- cache-unified
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
cache-controller@fff12000 {
|
||||
compatible = "arm,pl310-cache";
|
||||
reg = <0xfff12000 0x1000>;
|
||||
arm,data-latency = <1 1 1>;
|
||||
arm,tag-latency = <2 2 2>;
|
||||
arm,filter-ranges = <0x80000000 0x8000000>;
|
||||
cache-unified;
|
||||
cache-level = <2>;
|
||||
interrupts = <45>;
|
||||
};
|
||||
|
||||
...
|
||||
Loading…
Reference in New Issue
Block a user