Merge branch 'omap-for-v4.21/dt' into omap-for-v5.1/dt

This commit is contained in:
Tony Lindgren 2019-01-22 14:36:53 -08:00
commit a118029374
5 changed files with 29 additions and 8 deletions

View File

@ -14,6 +14,10 @@ / {
compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom",
"ti,am33xx";
chosen {
stdout-path = &uart0;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";

View File

@ -122,6 +122,7 @@ &mmc1 {
};
&mmc2 {
interrupts-extended = <&intc 86 &omap3_pmx_core 0x12e>;
vmmc-supply = <&wl12xx_vmmc>;
non-removable;
bus-width = <4>;
@ -132,8 +133,10 @@ &mmc2 {
wlcore: wlcore@2 {
compatible = "ti,wl1271";
reg = <2>;
interrupt-parent = <&gpio5>;
interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 149 */
/* gpio_149 with uart1_rts pad as wakeirq */
interrupts-extended = <&gpio5 21 IRQ_TYPE_EDGE_RISING>,
<&omap3_pmx_core 0x14e>;
interrupt-names = "irq", "wakeup";
ref-clock-frequency = <38400000>;
};
};

View File

@ -86,6 +86,10 @@ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_da
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dir_dat0 */
OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dir_dat1 */
OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dir_cmd */
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */
>;
};
@ -127,9 +131,13 @@ OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)
>;
};
/*
* Note that gpio_150 pulled high with internal pull to prevent wlcore
* reset on return from off mode in idle.
*/
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_cts.gpio_150 */
OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */
>;
};

View File

@ -359,20 +359,24 @@ &mmc2 {
&mmc3 {
vmmc-supply = <&wl12xx_vmmc>;
/* uart2_tx.sdmmc3_dat1 pad as wakeirq */
interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core 0xde>;
interrupt-names = "irq", "wakeup";
non-removable;
bus-width = <4>;
cap-power-off-card;
keep-power-in-suspend;
#address-cells = <1>;
#size-cells = <0>;
wlcore: wlcore@2 {
compatible = "ti,wl1285", "ti,wl1283";
reg = <2>;
interrupt-parent = <&gpio4>;
interrupts = <4 IRQ_TYPE_EDGE_RISING>; /* gpio100 */
/* gpio_100 with gpmc_wait2 pad as wakeirq */
interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>,
<&omap4_pmx_core 0x4e>;
interrupt-names = "irq", "wakeup";
ref-clock-frequency = <26000000>;
tcxo-clock-frequency = <26000000>;
};

View File

@ -485,8 +485,10 @@ &mmc5 {
wlcore: wlcore@2 {
compatible = "ti,wl1271";
reg = <2>;
interrupt-parent = <&gpio2>;
interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */
/* gpio_53 with gpmc_ncs3 pad as wakeup */
interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_RISING>,
<&omap4_pmx_core 0x3a>;
interrupt-names = "irq", "wakeup";
ref-clock-frequency = <38400000>;
};
};