networking changes for the 5.10 merge window

Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
 traversal in common container configs and improving TCP back-pressure.
 Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
 
 Expand netlink policy support and improve policy export to user space.
 (Ge)netlink core performs request validation according to declared
 policies. Expand the expressiveness of those policies (min/max length
 and bitmasks). Allow dumping policies for particular commands.
 This is used for feature discovery by user space (instead of kernel
 version parsing or trial and error).
 
 Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
 
 Allow more than 255 IPv4 multicast interfaces.
 
 Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
 packets of TCPv6.
 
 In Multi-patch TCP (MPTCP) support concurrent transmission of data
 on multiple subflows in a load balancing scenario. Enhance advertising
 addresses via the RM_ADDR/ADD_ADDR options.
 
 Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
 
 Allow more calls to same peer in RxRPC.
 
 Support two new Controller Area Network (CAN) protocols -
 CAN-FD and ISO 15765-2:2016.
 
 Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
 kernel problem.
 
 Add TC actions for implementing MPLS L2 VPNs.
 
 Improve nexthop code - e.g. handle various corner cases when nexthop
 objects are removed from groups better, skip unnecessary notifications
 and make it easier to offload nexthops into HW by converting
 to a blocking notifier.
 
 Support adding and consuming TCP header options by BPF programs,
 opening the doors for easy experimental and deployment-specific
 TCP option use.
 
 Reorganize TCP congestion control (CC) initialization to simplify life
 of TCP CC implemented in BPF.
 
 Add support for shipping BPF programs with the kernel and loading them
 early on boot via the User Mode Driver mechanism, hence reusing all the
 user space infra we have.
 
 Support sleepable BPF programs, initially targeting LSM and tracing.
 
 Add bpf_d_path() helper for returning full path for given 'struct path'.
 
 Make bpf_tail_call compatible with bpf-to-bpf calls.
 
 Allow BPF programs to call map_update_elem on sockmaps.
 
 Add BPF Type Format (BTF) support for type and enum discovery, as
 well as support for using BTF within the kernel itself (current use
 is for pretty printing structures).
 
 Support listing and getting information about bpf_links via the bpf
 syscall.
 
 Enhance kernel interfaces around NIC firmware update. Allow specifying
 overwrite mask to control if settings etc. are reset during update;
 report expected max time operation may take to users; support firmware
 activation without machine reboot incl. limits of how much impact
 reset may have (e.g. dropping link or not).
 
 Extend ethtool configuration interface to report IEEE-standard
 counters, to limit the need for per-vendor logic in user space.
 
 Adopt or extend devlink use for debug, monitoring, fw update
 in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
 mv88e6xxx, dpaa2-eth).
 
 In mlxsw expose critical and emergency SFP module temperature alarms.
 Refactor port buffer handling to make the defaults more suitable and
 support setting these values explicitly via the DCBNL interface.
 
 Add XDP support for Intel's igb driver.
 
 Support offloading TC flower classification and filtering rules to
 mscc_ocelot switches.
 
 Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
 fixed interval period pulse generator and one-step timestamping in
 dpaa-eth.
 
 Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
 offload.
 
 Add Lynx PHY/PCS MDIO module, and convert various drivers which have
 this HW to use it. Convert mvpp2 to split PCS.
 
 Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
 7-port Mediatek MT7531 IP.
 
 Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
 and wcn3680 support in wcn36xx.
 
 Improve performance for packets which don't require much offloads
 on recent Mellanox NICs by 20% by making multiple packets share
 a descriptor entry.
 
 Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
 subtree to drivers/net. Move MDIO drivers out of the phy directory.
 
 Clean up a lot of W=1 warnings, reportedly the actively developed
 subsections of networking drivers should now build W=1 warning free.
 
 Make sure drivers don't use in_interrupt() to dynamically adapt their
 code. Convert tasklets to use new tasklet_setup API (sadly this
 conversion is not yet complete).
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl+ItRwACgkQMUZtbf5S
 IrtTMg//UxpdR/MirT1DatBU0K/UGAZY82hV7F/UC8tPgjfHZeHvWlDFxfi3YP81
 PtPKbhRZ7DhwBXefUp6nY3UdvjftrJK2lJm8prJUPSsZRye8Wlcb7y65q7/P2y2U
 Efucyopg6RUrmrM0DUsIGYGJgylQLHnMYUl/keCsD4t5Bp4ksyi9R2t5eitGoWzh
 r3QGdbSa0AuWx4iu0i+tqp6Tj0ekMBMXLVb35dtU1t0joj2KTNEnSgABN3prOa8E
 iWYf2erOau68Ogp3yU3miCy0ZU4p/7qGHTtzbcp677692P/ekak6+zmfHLT9/Pjy
 2Stq2z6GoKuVxdktr91D9pA3jxG4LxSJmr0TImcGnXbvkMP3Ez3g9RrpV5fn8j6F
 mZCH8TKZAoD5aJrAJAMkhZmLYE1pvDa7KolSk8WogXrbCnTEb5Nv8FHTS1Qnk3yl
 wSKXuvutFVNLMEHCnWQLtODbTST9DI/aOi6EctPpuOA/ZyL1v3pl+gfp37S+LUTe
 owMnT/7TdvKaTD0+gIyU53M6rAWTtr5YyRQorX9awIu/4Ha0F0gYD7BJZQUGtegp
 HzKt59NiSrFdbSH7UdyemdBF4LuCgIhS7rgfeoUXMXmuPHq7eHXyHZt5dzPPa/xP
 81P0MAvdpFVwg8ij2yp2sHS7sISIRKq17fd1tIewUabxQbjXqPc=
 =bc1U
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

 - Add redirect_neigh() BPF packet redirect helper, allowing to limit
   stack traversal in common container configs and improving TCP
   back-pressure.

   Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

 - Expand netlink policy support and improve policy export to user
   space. (Ge)netlink core performs request validation according to
   declared policies. Expand the expressiveness of those policies
   (min/max length and bitmasks). Allow dumping policies for particular
   commands. This is used for feature discovery by user space (instead
   of kernel version parsing or trial and error).

 - Support IGMPv3/MLDv2 multicast listener discovery protocols in
   bridge.

 - Allow more than 255 IPv4 multicast interfaces.

 - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
   packets of TCPv6.

 - In Multi-patch TCP (MPTCP) support concurrent transmission of data on
   multiple subflows in a load balancing scenario. Enhance advertising
   addresses via the RM_ADDR/ADD_ADDR options.

 - Support SMC-Dv2 version of SMC, which enables multi-subnet
   deployments.

 - Allow more calls to same peer in RxRPC.

 - Support two new Controller Area Network (CAN) protocols - CAN-FD and
   ISO 15765-2:2016.

 - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
   kernel problem.

 - Add TC actions for implementing MPLS L2 VPNs.

 - Improve nexthop code - e.g. handle various corner cases when nexthop
   objects are removed from groups better, skip unnecessary
   notifications and make it easier to offload nexthops into HW by
   converting to a blocking notifier.

 - Support adding and consuming TCP header options by BPF programs,
   opening the doors for easy experimental and deployment-specific TCP
   option use.

 - Reorganize TCP congestion control (CC) initialization to simplify
   life of TCP CC implemented in BPF.

 - Add support for shipping BPF programs with the kernel and loading
   them early on boot via the User Mode Driver mechanism, hence reusing
   all the user space infra we have.

 - Support sleepable BPF programs, initially targeting LSM and tracing.

 - Add bpf_d_path() helper for returning full path for given 'struct
   path'.

 - Make bpf_tail_call compatible with bpf-to-bpf calls.

 - Allow BPF programs to call map_update_elem on sockmaps.

 - Add BPF Type Format (BTF) support for type and enum discovery, as
   well as support for using BTF within the kernel itself (current use
   is for pretty printing structures).

 - Support listing and getting information about bpf_links via the bpf
   syscall.

 - Enhance kernel interfaces around NIC firmware update. Allow
   specifying overwrite mask to control if settings etc. are reset
   during update; report expected max time operation may take to users;
   support firmware activation without machine reboot incl. limits of
   how much impact reset may have (e.g. dropping link or not).

 - Extend ethtool configuration interface to report IEEE-standard
   counters, to limit the need for per-vendor logic in user space.

 - Adopt or extend devlink use for debug, monitoring, fw update in many
   drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
   dpaa2-eth).

 - In mlxsw expose critical and emergency SFP module temperature alarms.
   Refactor port buffer handling to make the defaults more suitable and
   support setting these values explicitly via the DCBNL interface.

 - Add XDP support for Intel's igb driver.

 - Support offloading TC flower classification and filtering rules to
   mscc_ocelot switches.

 - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
   fixed interval period pulse generator and one-step timestamping in
   dpaa-eth.

 - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
   offload.

 - Add Lynx PHY/PCS MDIO module, and convert various drivers which have
   this HW to use it. Convert mvpp2 to split PCS.

 - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
   7-port Mediatek MT7531 IP.

 - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
   and wcn3680 support in wcn36xx.

 - Improve performance for packets which don't require much offloads on
   recent Mellanox NICs by 20% by making multiple packets share a
   descriptor entry.

 - Move chelsio inline crypto drivers (for TLS and IPsec) from the
   crypto subtree to drivers/net. Move MDIO drivers out of the phy
   directory.

 - Clean up a lot of W=1 warnings, reportedly the actively developed
   subsections of networking drivers should now build W=1 warning free.

 - Make sure drivers don't use in_interrupt() to dynamically adapt their
   code. Convert tasklets to use new tasklet_setup API (sadly this
   conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
  Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
  net, sockmap: Don't call bpf_prog_put() on NULL pointer
  bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
  bpf, sockmap: Add locking annotations to iterator
  netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
  net: fix pos incrementment in ipv6_route_seq_next
  net/smc: fix invalid return code in smcd_new_buf_create()
  net/smc: fix valid DMBE buffer sizes
  net/smc: fix use-after-free of delayed events
  bpfilter: Fix build error with CONFIG_BPFILTER_UMH
  cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
  net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
  bpf: Fix register equivalence tracking.
  rxrpc: Fix loss of final ack on shutdown
  rxrpc: Fix bundle counting for exclusive connections
  netfilter: restore NF_INET_NUMHOOKS
  ibmveth: Identify ingress large send packets.
  ibmveth: Switch order of ibmveth_helper calls.
  cxgb4: handle 4-tuple PEDIT to NAT mode translation
  selftests: Add VRF route leaking tests
  ...

CREDITS

@@ -191,6 +191,10 @@ N: Krishna Balasubramanian
 E: balasub@cis.ohio-state.edu
 D: Wrote SYS V IPC (part of standard kernel since 0.99.10)
 
+B: Robert Baldyga
+E: r.baldyga@hackerion.com
+D: Samsung S3FWRN5 NCI NFC Controller
+
 N: Chris Ball
 E: chris@printf.net
 D: Former maintainer of the MMC/SD/SDIO subsystem.

Documentation/admin-guide/kernel-parameters.txt

@@ -1349,6 +1349,11 @@
 			Format: <interval>,<probability>,<space>,<times>
 			See also Documentation/fault-injection/.
 
+	fb_tunnels=	[NET]
+			Format: { initns | none }
+			See Documentation/admin-guide/sysctl/net.rst for
+			fb_tunnels_only_for_init_ns
+
 	floppy=		[HW]
 			See Documentation/admin-guide/blockdev/floppy.rst.
 

Documentation/admin-guide/sysctl/net.rst

@@ -300,7 +300,6 @@ Note:
       0:    0     1     2     3     4     5     6     7
   RSS hash key:
   84:50:f4:00:a8:15:d1:a7:e9:7f:1d:60:35:c7:47:25:42:97:74:ca:56:bb:b6:a1:d8:43:e3:c9:0c:fd:17:55:c2:3a:4d:69:ed:f1:42:89
-
 netdev_tstamp_prequeue
 ----------------------
 
@@ -321,11 +320,20 @@ fb_tunnels_only_for_init_net
 ----------------------------
 
 Controls if fallback tunnels (like tunl0, gre0, gretap0, erspan0,
-sit0, ip6tnl0, ip6gre0) are automatically created when a new
+sit0, ip6tnl0, ip6gre0) are automatically created. There are 3 possibilities
-network namespace is created, if corresponding tunnel is present
+(a) value = 0; respective fallback tunnels are created when module is
-in initial network namespace.
+loaded in every net namespaces (backward compatible behavior).
-If set to 1, these devices are not automatically created, and
+(b) value = 1; [kcmd value: initns] respective fallback tunnels are
-user space is responsible for creating them if needed.
+created only in init net namespace and every other net namespace will
+not have them.
+(c) value = 2; [kcmd value: none] fallback tunnels are not created
+when a module is loaded in any of the net namespace. Setting value to
+"2" is pointless after boot if these modules are built-in, so there is
+a kernel command-line option that can change this default. Please refer to
+Documentation/admin-guide/kernel-parameters.txt for additional details.
+
+Not creating fallback tunnels gives control to userspace to create
+whatever is needed only and avoid creating devices which are redundant.
 
 Default : 0  (for compatibility reasons)
 

Documentation/bpf/bpf_devel_QA.rst

@@ -60,13 +60,13 @@ Q: Where can I find patches currently under discussion for BPF subsystem?
 A: All patches that are Cc'ed to netdev are queued for review under netdev
 patchwork project:
 
-  http://patchwork.ozlabs.org/project/netdev/list/
+  https://patchwork.kernel.org/project/netdevbpf/list/
 
 Those patches which target BPF, are assigned to a 'bpf' delegate for
 further processing from BPF maintainers. The current queue with
 patches under review can be found at:
 
-  https://patchwork.ozlabs.org/project/netdev/list/?delegate=77147
+  https://patchwork.kernel.org/project/netdevbpf/list/?delegate=121173
 
 Once the patches have been reviewed by the BPF community as a whole
 and approved by the BPF maintainers, their status in patchwork will be
@@ -149,7 +149,7 @@ In case the patch or patch series has to be reworked and sent out
 again in a second or later revision, it is also required to add a
 version number (``v2``, ``v3``, ...) into the subject prefix::
 
-  git format-patch --subject-prefix='PATCH net-next v2' start..finish
+  git format-patch --subject-prefix='PATCH bpf-next v2' start..finish
 
 When changes have been requested to the patch series, always send the
 whole patch series again with the feedback incorporated (never send
@@ -479,17 +479,18 @@ LLVM's static compiler lists the supported targets through
 
      $ llc --version
      LLVM (http://llvm.org/):
-       LLVM version 6.0.0svn
+       LLVM version 10.0.0
        Optimized build.
        Default target: x86_64-unknown-linux-gnu
        Host CPU: skylake
 
        Registered Targets:
-         bpf    - BPF (host endian)
+         aarch64    - AArch64 (little endian)
-         bpfeb  - BPF (big endian)
+         bpf        - BPF (host endian)
-         bpfel  - BPF (little endian)
+         bpfeb      - BPF (big endian)
-         x86    - 32-bit X86: Pentium-Pro and above
+         bpfel      - BPF (little endian)
-         x86-64 - 64-bit X86: EM64T and AMD64
+         x86        - 32-bit X86: Pentium-Pro and above
+         x86-64     - 64-bit X86: EM64T and AMD64
 
 For developers in order to utilize the latest features added to LLVM's
 BPF back end, it is advisable to run the latest LLVM releases. Support
@@ -517,6 +518,10 @@ from the git repositories::
 The built binaries can then be found in the build/bin/ directory, where
 you can point the PATH variable to.
 
+Set ``-DLLVM_TARGETS_TO_BUILD`` equal to the target you wish to build, you
+will find a full list of targets within the llvm-project/llvm/lib/Target
+directory.
+
 Q: Reporting LLVM BPF issues
 ----------------------------
 Q: Should I notify BPF kernel maintainers about issues in LLVM's BPF code

Documentation/bpf/btf.rst

@@ -724,6 +724,31 @@ want to define unused entry in BTF_ID_LIST, like::
       BTF_ID_UNUSED
       BTF_ID(struct, task_struct)
 
+The ``BTF_SET_START/END`` macros pair defines sorted list of BTF ID values
+and their count, with following syntax::
+
+  BTF_SET_START(set)
+  BTF_ID(type1, name1)
+  BTF_ID(type2, name2)
+  BTF_SET_END(set)
+
+resulting in following layout in .BTF_ids section::
+
+  __BTF_ID__set__set:
+  .zero 4
+  __BTF_ID__type1__name1__3:
+  .zero 4
+  __BTF_ID__type2__name2__4:
+  .zero 4
+
+The ``struct btf_id_set set;`` variable is defined to access the list.
+
+The ``typeX`` name can be one of following::
+
+   struct, union, typedef, func
+
+and is used as a filter when resolving the BTF ID value.
+
 All the BTF ID lists and sets are compiled in the .BTF_ids section and
 resolved during the linking phase of kernel build by ``resolve_btfids`` tool.
 

Documentation/bpf/index.rst

@@ -52,6 +52,7 @@ Program types
    prog_cgroup_sysctl
    prog_flow_dissector
    bpf_lsm
+   prog_sk_lookup
 
 
 Map types

Documentation/bpf/prog_sk_lookup.rst

@@ -0,0 +1,98 @@
+.. SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+=====================
+BPF sk_lookup program
+=====================
+
+BPF sk_lookup program type (``BPF_PROG_TYPE_SK_LOOKUP``) introduces programmability
+into the socket lookup performed by the transport layer when a packet is to be
+delivered locally.
+
+When invoked BPF sk_lookup program can select a socket that will receive the
+incoming packet by calling the ``bpf_sk_assign()`` BPF helper function.
+
+Hooks for a common attach point (``BPF_SK_LOOKUP``) exist for both TCP and UDP.
+
+Motivation
+==========
+
+BPF sk_lookup program type was introduced to address setup scenarios where
+binding sockets to an address with ``bind()`` socket call is impractical, such
+as:
+
+1. receiving connections on a range of IP addresses, e.g. 192.0.2.0/24, when
+   binding to a wildcard address ``INADRR_ANY`` is not possible due to a port
+   conflict,
+2. receiving connections on all or a wide range of ports, i.e. an L7 proxy use
+   case.
+
+Such setups would require creating and ``bind()``'ing one socket to each of the
+IP address/port in the range, leading to resource consumption and potential
+latency spikes during socket lookup.
+
+Attachment
+==========
+
+BPF sk_lookup program can be attached to a network namespace with
+``bpf(BPF_LINK_CREATE, ...)`` syscall using the ``BPF_SK_LOOKUP`` attach type and a
+netns FD as attachment ``target_fd``.
+
+Multiple programs can be attached to one network namespace. Programs will be
+invoked in the same order as they were attached.
+
+Hooks
+=====
+
+The attached BPF sk_lookup programs run whenever the transport layer needs to
+find a listening (TCP) or an unconnected (UDP) socket for an incoming packet.
+
+Incoming traffic to established (TCP) and connected (UDP) sockets is delivered
+as usual without triggering the BPF sk_lookup hook.
+
+The attached BPF programs must return with either ``SK_PASS`` or ``SK_DROP``
+verdict code. As for other BPF program types that are network filters,
+``SK_PASS`` signifies that the socket lookup should continue on to regular
+hashtable-based lookup, while ``SK_DROP`` causes the transport layer to drop the
+packet.
+
+A BPF sk_lookup program can also select a socket to receive the packet by
+calling ``bpf_sk_assign()`` BPF helper. Typically, the program looks up a socket
+in a map holding sockets, such as ``SOCKMAP`` or ``SOCKHASH``, and passes a
+``struct bpf_sock *`` to ``bpf_sk_assign()`` helper to record the
+selection. Selecting a socket only takes effect if the program has terminated
+with ``SK_PASS`` code.
+
+When multiple programs are attached, the end result is determined from return
+codes of all the programs according to the following rules:
+
+1. If any program returned ``SK_PASS`` and selected a valid socket, the socket
+   is used as the result of the socket lookup.
+2. If more than one program returned ``SK_PASS`` and selected a socket, the last
+   selection takes effect.
+3. If any program returned ``SK_DROP``, and no program returned ``SK_PASS`` and
+   selected a socket, socket lookup fails.
+4. If all programs returned ``SK_PASS`` and none of them selected a socket,
+   socket lookup continues on.
+
+API
+===
+
+In its context, an instance of ``struct bpf_sk_lookup``, BPF sk_lookup program
+receives information about the packet that triggered the socket lookup. Namely:
+
+* IP version (``AF_INET`` or ``AF_INET6``),
+* L4 protocol identifier (``IPPROTO_TCP`` or ``IPPROTO_UDP``),
+* source and destination IP address,
+* source and destination L4 port,
+* the socket that has been selected with ``bpf_sk_assign()``.
+
+Refer to ``struct bpf_sk_lookup`` declaration in ``linux/bpf.h`` user API
+header, and `bpf-helpers(7)
+<https://man7.org/linux/man-pages/man7/bpf-helpers.7.html>`_ man-page section
+for ``bpf_sk_assign()`` for details.
+
+Example
+=======
+
+See ``tools/testing/selftests/bpf/prog_tests/sk_lookup.c`` for the reference
+implementation.

Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt

@@ -50,6 +50,13 @@ Optional properties:
 - reset-names: If the "reset" property is specified, this property should have
   the value "switch" to denote the switch reset line.
 
+- clocks: when provided, the first phandle is to the switch's main clock and
+  is valid for both BCM7445 and BCM7278. The second phandle is only applicable
+  to BCM7445 and is to support dividing the switch core clock.
+
+- clock-names: when provided, the first phandle must be "sw_switch", and the
+  second must be named "sw_switch_mdiv".
+
 Port subnodes:
 
 Optional properties:

Documentation/devicetree/bindings/net/brcm,systemport.txt

@@ -20,6 +20,11 @@ Optional properties:
 - systemport,num-tier1-arb: number of tier 1 arbiters, an integer
 - systemport,num-txq: number of HW transmit queues, an integer
 - systemport,num-rxq: number of HW receive queues, an integer
+- clocks: When provided, must be two phandles to the functional clocks nodes of
+  the SYSTEMPORT block. The first phandle is the main SYSTEMPORT clock used
+  during normal operation, while the second phandle is the Wake-on-LAN clock.
+- clock-names: When provided, names of the functional clock phandles, first
+  name should be "sw_sysport" and second should be "sw_sysportwol".
 
 Example:
 ethernet@f04a0000 {

Documentation/devicetree/bindings/net/can/fsl-flexcan.txt

@@ -4,6 +4,12 @@ Required properties:
 
 - compatible : Should be "fsl,<processor>-flexcan"
 
+  where <processor> is imx8qm, imx6q, imx28, imx53, imx35, imx25, p1010,
+  vf610, ls1021ar2, lx2160ar1, ls1028ar1.
+
+  The ls1028ar1 must be followed by lx2160ar1, e.g.
+   - "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"
+
   An implementation should also claim any of the following compatibles
   that it is fully backwards compatible with:
 
@@ -25,12 +31,10 @@ Optional properties:
               endian.
 
 - fsl,stop-mode: register bits of stop mode control, the format is
-		 <&gpr req_gpr req_bit ack_gpr ack_bit>.
+		 <&gpr req_gpr req_bit>.
 		 gpr is the phandle to general purpose register node.
 		 req_gpr is the gpr register offset of CAN stop request.
 		 req_bit is the bit offset of CAN stop request.
-		 ack_gpr is the gpr register offset of CAN stop acknowledge.
-		 ack_bit is the bit offset of CAN stop acknowledge.
 
 - fsl,clk-source: Select the clock source to the CAN Protocol Engine (PE).
 		  It's SoC Implementation dependent. Refer to RM for detailed

Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt

@@ -12,6 +12,9 @@ Required properties:
 Optional properties:
  - vdd-supply: Regulator that powers the CAN controller.
  - xceiver-supply: Regulator that powers the CAN transceiver.
+ - gpio-controller: Indicates this device is a GPIO controller.
+ - #gpio-cells: Should be two. The first cell is the pin number and
+                the second cell is used to specify the gpio polarity.
 
 Example:
 	can0: can@1 {
@@ -19,7 +22,9 @@ Example:
 		reg = <1>;
 		clocks = <&clk24m>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <13 0x2>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
 		vdd-supply = <&reg5v0>;
 		xceiver-supply = <&reg5v0>;
+		gpio-controller;
+		#gpio-cells = <2>;
 	};

Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml

@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Microchip MCP2517FD and MCP2518FD stand-alone CAN controller device tree
+  bindings
+
+maintainers:
+  - Marc Kleine-Budde <mkl@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: microchip,mcp2517fd
+        description: for MCP2517FD
+      - const: microchip,mcp2518fd
+        description: for MCP2518FD
+      - const: microchip,mcp251xfd
+        description: to autodetect chip variant
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that powers the CAN controller.
+
+  xceiver-supply:
+    description: Regulator that powers the CAN transceiver.
+
+  microchip,rx-int-gpios:
+    description:
+      GPIO phandle of GPIO connected to to INT1 pin of the MCP251XFD, which
+      signals a pending RX interrupt.
+    maxItems: 1
+
+  spi-max-frequency:
+    description:
+      Must be half or less of "clocks" frequency.
+    maximum: 20000000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        can@0 {
+            compatible = "microchip,mcp251xfd";
+            reg = <0>;
+            clocks = <&can0_osc>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&can0_pins>;
+            spi-max-frequency = <20000000>;
+            interrupts-extended = <&gpio 13 IRQ_TYPE_LEVEL_LOW>;
+            microchip,rx-int-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&reg5v0>;
+            xceiver-supply = <&reg5v0>;
+        };
+    };

Documentation/devicetree/bindings/net/can/rcar_can.txt

@@ -2,13 +2,15 @@ Renesas R-Car CAN controller Device Tree Bindings
 -------------------------------------------------
 
 Required properties:
-- compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
+- compatible: "renesas,can-r8a7742" if CAN controller is a part of R8A7742 SoC.
+	      "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
 	      "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC.
 	      "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
 	      "renesas,can-r8a77470" if CAN controller is a part of R8A77470 SoC.
 	      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
 	      "renesas,can-r8a774b1" if CAN controller is a part of R8A774B1 SoC.
 	      "renesas,can-r8a774c0" if CAN controller is a part of R8A774C0 SoC.
+	      "renesas,can-r8a774e1" if CAN controller is a part of R8A774E1 SoC.
 	      "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
 	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
 	      "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
@@ -37,8 +39,8 @@ Required properties:
 - pinctrl-0: pin control group to be used for this controller.
 - pinctrl-names: must be "default".
 
-Required properties for R8A774A1, R8A774B1, R8A774C0, R8A7795, R8A7796,
+Required properties for R8A774A1, R8A774B1, R8A774C0, R8A774E1, R8A7795,
-R8A77965, R8A77990, and R8A77995:
+R8A7796, R8A77965, R8A77990, and R8A77995:
 For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can
 be used by both CAN and CAN FD controller at the same time. It needs to be
 scaled to maximum frequency if any of these controllers use it. This is done

Documentation/devicetree/bindings/net/can/rcar_canfd.txt

@@ -7,6 +7,7 @@ Required properties:
   - "renesas,r8a774a1-canfd" for R8A774A1 (RZ/G2M) compatible controller.
   - "renesas,r8a774b1-canfd" for R8A774B1 (RZ/G2N) compatible controller.
   - "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller.
+  - "renesas,r8a774e1-canfd" for R8A774E1 (RZ/G2H) compatible controller.
   - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
   - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.
   - "renesas,r8a77965-canfd" for R8A77965 (R-Car M3-N) compatible controller.
@@ -32,8 +33,8 @@ The name of the child nodes are "channel0" and "channel1" respectively. Each
 child node supports the "status" property only, which is used to
 enable/disable the respective channel.
 
-Required properties for R8A774A1, R8A774B1, R8A774C0, R8A7795, R8A7796,
+Required properties for R8A774A1, R8A774B1, R8A774C0, R8A774E1, R8A7795,
-R8A77965, R8A77990, and R8A77995:
+R8A7796, R8A77965, R8A77990, and R8A77995:
 In the denoted SoCs, canfd clock is a div6 clock and can be used by both CAN
 and CAN FD controller at the same time. It needs to be scaled to maximum
 frequency if any of these controllers use it. This is done using the below

Documentation/devicetree/bindings/net/dsa/b53.txt

@@ -95,7 +95,7 @@ Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
 
 		fixed-link {
 			speed = <1000>;
-			duplex-full;
+			full-duplex;
 		};
 	};
 
@@ -104,8 +104,9 @@ Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch0: ethernet-switch@30 {
+		switch0: ethernet-switch@1e {
 			compatible = "brcm,bcm53125";
+			reg = <30>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
@@ -128,7 +129,7 @@ Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
 					label = "cable-modem";
 					fixed-link {
 						speed = <1000>;
-						duplex-full;
+						full-duplex;
 					};
 					phy-mode = "rgmii-txid";
 				};
@@ -138,7 +139,7 @@ Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
 					label = "cpu";
 					fixed-link {
 						speed = <1000>;
-						duplex-full;
+						full-duplex;
 					};
 					phy-mode = "rgmii-txid";
 					ethernet = <&eth0>;

Documentation/devicetree/bindings/net/dsa/mt7530.txt

@@ -5,6 +5,7 @@ Required properties:
 
 - compatible: may be compatible = "mediatek,mt7530"
 	or compatible = "mediatek,mt7621"
+	or compatible = "mediatek,mt7531"
 - #address-cells: Must be 1.
 - #size-cells: Must be 0.
 - mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part
@@ -32,10 +33,14 @@ Required properties for the child nodes within ports container:
 
 - reg: Port address described must be 6 for CPU port and from 0 to 5 for
 	user ports.
-- phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
+- phy-mode: String, the following values are acceptable for port labeled
-	 "cpu".
+	"cpu":
+	If compatible mediatek,mt7530 or mediatek,mt7621 is set,
+	must be either "trgmii" or "rgmii"
+	If compatible mediatek,mt7531 is set,
+	must be either "sgmii", "1000base-x" or "2500base-x"
 
-Port 5 of the switch is muxed between:
+Port 5 of mt7530 and mt7621 switch is muxed between:
 1. GMAC5: GMAC5 can interface with another external MAC or PHY.
 2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC
    of the SOC. Used in many setups where port 0/4 becomes the WAN port.

Documentation/devicetree/bindings/net/ethernet-controller.yaml

@@ -120,6 +120,13 @@ properties:
       and is useful for determining certain configuration settings
       such as flow control thresholds.
 
+  rx-internal-delay-ps:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RGMII Receive Clock Delay defined in pico seconds.
+      This is used for controllers that have configurable RX internal delays.
+      If this property is present then the MAC applies the RX delay.
+
   sfp:
     $ref: /schemas/types.yaml#definitions/phandle
     description:
@@ -131,6 +138,13 @@ properties:
       The size of the controller\'s transmit fifo in bytes. This
       is used for components that can have configurable fifo sizes.
 
+  tx-internal-delay-ps:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RGMII Transmit Clock Delay defined in pico seconds.
+      This is used for controllers that have configurable TX internal delays.
+      If this property is present then the MAC applies the TX delay.
+
   managed:
     description:
       Specifies the PHY management type. If auto is set and fixed-link

Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml

@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/intel,dwmac-plat.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel DWMAC glue layer Device Tree Bindings
+
+maintainers:
+  - Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - intel,keembay-dwmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - intel,keembay-dwmac
+          - const: snps,dwmac-4.10a
+
+  clocks:
+    items:
+      - description: GMAC main clock
+      - description: PTP reference clock
+      - description: Tx clock
+
+  clock-names:
+    items:
+      - const: stmmaceth
+      - const: ptp_ref
+      - const: tx_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+examples:
+# FIXME: Remove defines and include the correct header file
+# once it is available in mainline.
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #define MOVISOC_KMB_PSS_GBE
+    #define MOVISOC_KMB_PSS_AUX_GBE_PTP
+    #define MOVISOC_KMB_PSS_AUX_GBE_TX
+
+    stmmac_axi_setup: stmmac-axi-config {
+        snps,lpi_en;
+        snps,wr_osr_lmt = <0x0>;
+        snps,rd_osr_lmt = <0x2>;
+        snps,blen = <0 0 0 0 16 8 4>;
+    };
+
+    mtl_rx_setup: rx-queues-config {
+        snps,rx-queues-to-use = <2>;
+        snps,rx-sched-sp;
+        queue0 {
+            snps,dcb-algorithm;
+            snps,map-to-dma-channel = <0x0>;
+            snps,priority = <0x0>;
+        };
+
+        queue1 {
+            snps,dcb-algorithm;
+            snps,map-to-dma-channel = <0x1>;
+            snps,priority = <0x1>;
+        };
+    };
+
+    mtl_tx_setup: tx-queues-config {
+        snps,tx-queues-to-use = <2>;
+        snps,tx-sched-wrr;
+        queue0 {
+           snps,weight = <0x10>;
+           snps,dcb-algorithm;
+           snps,priority = <0x0>;
+        };
+
+        queue1 {
+            snps,weight = <0x10>;
+            snps,dcb-algorithm;
+            snps,priority = <0x1>;
+        };
+    };
+
+    gmac0: ethernet@3a000000 {
+        compatible = "intel,keembay-dwmac", "snps,dwmac-4.10a";
+        interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "macirq";
+        reg = <0x3a000000 0x8000>;
+        snps,perfect-filter-entries = <128>;
+        phy-handle = <&eth_phy0>;
+        phy-mode = "rgmii";
+        rx-fifo-depth = <4096>;
+        tx-fifo-depth = <4096>;
+        clock-names = "stmmaceth", "ptp_ref", "tx_clk";
+        clocks = <&scmi_clk MOVISOC_KMB_PSS_GBE>,
+                 <&scmi_clk MOVISOC_KMB_PSS_AUX_GBE_PTP>,
+                 <&scmi_clk MOVISOC_KMB_PSS_AUX_GBE_TX>;
+        snps,pbl = <0x4>;
+        snps,axi-config = <&stmmac_axi_setup>;
+        snps,mtl-rx-config = <&mtl_rx_setup>;
+        snps,mtl-tx-config = <&mtl_tx_setup>;
+        snps,tso;
+        status = "okay";
+
+        mdio0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "snps,dwmac-mdio";
+
+            ethernet-phy@0 {
+                reg = <0>;
+            };
+        };
+    };
+
+...

Documentation/devicetree/bindings/net/marvell,prestera.txt

@@ -45,3 +45,37 @@ dfx-server {
 	ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
 	reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
 };
+
+Marvell Prestera SwitchDev bindings
+-----------------------------------
+Optional properties:
+- compatible: must be "marvell,prestera"
+- base-mac-provider: describes handle to node which provides base mac address,
+	might be a static base mac address or nvme cell provider.
+
+Example:
+
+eeprom_mac_addr: eeprom-mac-addr {
+       compatible = "eeprom,mac-addr-cell";
+       status = "okay";
+
+       nvmem = <&eeprom_at24>;
+};
+
+prestera {
+       compatible = "marvell,prestera";
+       status = "okay";
+
+       base-mac-provider = <&eeprom_mac_addr>;
+};
+
+The current implementation of Prestera Switchdev PCI interface driver requires
+that BAR2 is assigned to 0xf6000000 as base address from the PCI IO range:
+
+&cp0_pcie0 {
+	ranges = <0x81000000 0x0 0xfb000000 0x0 0xfb000000 0x0 0xf0000
+		0x82000000 0x0 0xf6000000 0x0 0xf6000000 0x0 0x2000000
+		0x82000000 0x0 0xf9000000 0x0 0xf9000000 0x0 0x100000>;
+	phys = <&cp0_comphy0 0>;
+	status = "okay";
+};

Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt

@@ -1,25 +0,0 @@
-* Samsung S3FWRN5 NCI NFC Controller
-
-Required properties:
-- compatible: Should be "samsung,s3fwrn5-i2c".
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip
-- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and
-  sleep/wakeup control
-
-Example:
-
-&hsi2c_4 {
-	s3fwrn5@27 {
-		compatible = "samsung,s3fwrn5-i2c";
-
-		reg = <0x27>;
-
-		interrupt-parent = <&gpa1>;
-		interrupts = <3 0 0>;
-
-		s3fwrn5,en-gpios = <&gpf1 4 0>;
-		s3fwrn5,fw-gpios = <&gpj0 2 0>;
-	};
-};

Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml

@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/samsung,s3fwrn5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3FWRN5 NCI NFC Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Krzysztof Opasiak <k.opasiak@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,s3fwrn5-i2c
+
+  en-gpios:
+    maxItems: 1
+    description:
+      Output GPIO pin used for enabling/disabling the chip
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  wake-gpios:
+    maxItems: 1
+    description:
+      Output GPIO pin used to enter firmware mode and sleep/wakeup control
+
+  s3fwrn5,en-gpios:
+    maxItems: 1
+    deprecated: true
+    description:
+      Use en-gpios
+
+  s3fwrn5,fw-gpios:
+    maxItems: 1
+    deprecated: true
+    description:
+      Use wake-gpios
+
+additionalProperties: false
+
+required:
+  - compatible
+  - en-gpios
+  - interrupts
+  - reg
+  - wake-gpios
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c4 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        s3fwrn5@27 {
+            compatible = "samsung,s3fwrn5-i2c";
+            reg = <0x27>;
+
+            interrupt-parent = <&gpa1>;
+            interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+
+            en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
+            wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
+        };
+    };

Documentation/devicetree/bindings/net/renesas,etheravb.yaml

@@ -0,0 +1,262 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,etheravb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Ethernet AVB
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,etheravb-r8a7742      # RZ/G1H
+              - renesas,etheravb-r8a7743      # RZ/G1M
+              - renesas,etheravb-r8a7744      # RZ/G1N
+              - renesas,etheravb-r8a7745      # RZ/G1E
+              - renesas,etheravb-r8a77470     # RZ/G1C
+              - renesas,etheravb-r8a7790      # R-Car H2
+              - renesas,etheravb-r8a7791      # R-Car M2-W
+              - renesas,etheravb-r8a7792      # R-Car V2H
+              - renesas,etheravb-r8a7793      # R-Car M2-N
+              - renesas,etheravb-r8a7794      # R-Car E2
+          - const: renesas,etheravb-rcar-gen2 # R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,etheravb-r8a774a1     # RZ/G2M
+              - renesas,etheravb-r8a774b1     # RZ/G2N
+              - renesas,etheravb-r8a774c0     # RZ/G2E
+              - renesas,etheravb-r8a774e1     # RZ/G2H
+              - renesas,etheravb-r8a7795      # R-Car H3
+              - renesas,etheravb-r8a7796      # R-Car M3-W
+              - renesas,etheravb-r8a77961     # R-Car M3-W+
+              - renesas,etheravb-r8a77965     # R-Car M3-N
+              - renesas,etheravb-r8a77970     # R-Car V3M
+              - renesas,etheravb-r8a77980     # R-Car V3H
+              - renesas,etheravb-r8a77990     # R-Car E3
+              - renesas,etheravb-r8a77995     # R-Car D3
+          - const: renesas,etheravb-rcar-gen3 # R-Car Gen3 and RZ/G2
+
+  reg: true
+
+  interrupts: true
+
+  interrupt-names: true
+
+  clocks:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  phy-mode: true
+
+  phy-handle: true
+
+  '#address-cells':
+    description: Number of address cells for the MDIO bus.
+    const: 1
+
+  '#size-cells':
+    description: Number of size cells on the MDIO bus.
+    const: 0
+
+  renesas,no-ether-link:
+    type: boolean
+    description:
+      Specify when a board does not provide a proper AVB_LINK signal.
+
+  renesas,ether-link-active-low:
+    type: boolean
+    description:
+      Specify when the AVB_LINK signal is active-low instead of normal
+      active-high.
+
+  rx-internal-delay-ps:
+    enum: [0, 1800]
+
+  tx-internal-delay-ps:
+    enum: [0, 2000]
+
+patternProperties:
+  "^ethernet-phy@[0-9a-f]$":
+    type: object
+    $ref: ethernet-phy.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+  - phy-mode
+  - phy-handle
+  - '#address-cells'
+  - '#size-cells'
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,etheravb-rcar-gen2
+              - renesas,etheravb-r8a7795
+              - renesas,etheravb-r8a7796
+              - renesas,etheravb-r8a77961
+              - renesas,etheravb-r8a77965
+    then:
+      properties:
+        reg:
+          items:
+            - description: MAC register block
+            - description: Stream buffer
+    else:
+      properties:
+        reg:
+          items:
+            - description: MAC register block
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,etheravb-rcar-gen2
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: mux
+        rx-internal-delay-ps: false
+    else:
+      properties:
+        interrupts:
+          minItems: 25
+          maxItems: 25
+        interrupt-names:
+          items:
+            pattern: '^ch[0-9]+$'
+      required:
+        - interrupt-names
+        - rx-internal-delay-ps
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,etheravb-r8a774a1
+              - renesas,etheravb-r8a774b1
+              - renesas,etheravb-r8a7795
+              - renesas,etheravb-r8a7796
+              - renesas,etheravb-r8a77961
+              - renesas,etheravb-r8a77965
+              - renesas,etheravb-r8a77970
+              - renesas,etheravb-r8a77980
+    then:
+      required:
+        - tx-internal-delay-ps
+    else:
+      properties:
+        tx-internal-delay-ps: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,etheravb-r8a77995
+    then:
+      properties:
+        rx-internal-delay-ps:
+          const: 1800
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,etheravb-r8a77980
+    then:
+      properties:
+        tx-internal-delay-ps:
+          const: 2000
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    aliases {
+            ethernet0 = &avb;
+    };
+
+    avb: ethernet@e6800000 {
+            compatible = "renesas,etheravb-r8a7795",
+                         "renesas,etheravb-rcar-gen3";
+            reg = <0xe6800000 0x800>, <0xe6a00000 0x10000>;
+            interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6",
+                              "ch7", "ch8", "ch9", "ch10", "ch11", "ch12",
+                              "ch13", "ch14", "ch15", "ch16", "ch17", "ch18",
+                              "ch19", "ch20", "ch21", "ch22", "ch23", "ch24";
+            clocks = <&cpg CPG_MOD 812>;
+            iommus = <&ipmmu_ds0 16>;
+            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+            resets = <&cpg 812>;
+            phy-mode = "rgmii";
+            phy-handle = <&phy0>;
+            rx-internal-delay-ps = <0>;
+            tx-internal-delay-ps = <2000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phy0: ethernet-phy@0 {
+                    rxc-skew-ps = <1500>;
+                    reg = <0>;
+                    interrupt-parent = <&gpio2>;
+                    interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+                    reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+            };
+    };

Documentation/devicetree/bindings/net/renesas,ravb.txt

@@ -1,135 +0,0 @@
-* Renesas Electronics Ethernet AVB
-
-This file provides information on what the device node for the Ethernet AVB
-interface contains.
-
-Required properties:
-- compatible: Must contain one or more of the following:
-      - "renesas,etheravb-r8a7742" for the R8A7742 SoC.
-      - "renesas,etheravb-r8a7743" for the R8A7743 SoC.
-      - "renesas,etheravb-r8a7744" for the R8A7744 SoC.
-      - "renesas,etheravb-r8a7745" for the R8A7745 SoC.
-      - "renesas,etheravb-r8a77470" for the R8A77470 SoC.
-      - "renesas,etheravb-r8a7790" for the R8A7790 SoC.
-      - "renesas,etheravb-r8a7791" for the R8A7791 SoC.
-      - "renesas,etheravb-r8a7792" for the R8A7792 SoC.
-      - "renesas,etheravb-r8a7793" for the R8A7793 SoC.
-      - "renesas,etheravb-r8a7794" for the R8A7794 SoC.
-      - "renesas,etheravb-rcar-gen2" as a fallback for the above
-		R-Car Gen2 and RZ/G1 devices.
-
-      - "renesas,etheravb-r8a774a1" for the R8A774A1 SoC.
-      - "renesas,etheravb-r8a774b1" for the R8A774B1 SoC.
-      - "renesas,etheravb-r8a774c0" for the R8A774C0 SoC.
-      - "renesas,etheravb-r8a774e1" for the R8A774E1 SoC.
-      - "renesas,etheravb-r8a7795" for the R8A7795 SoC.
-      - "renesas,etheravb-r8a7796" for the R8A77960 SoC.
-      - "renesas,etheravb-r8a77961" for the R8A77961 SoC.
-      - "renesas,etheravb-r8a77965" for the R8A77965 SoC.
-      - "renesas,etheravb-r8a77970" for the R8A77970 SoC.
-      - "renesas,etheravb-r8a77980" for the R8A77980 SoC.
-      - "renesas,etheravb-r8a77990" for the R8A77990 SoC.
-      - "renesas,etheravb-r8a77995" for the R8A77995 SoC.
-      - "renesas,etheravb-rcar-gen3" as a fallback for the above
-		R-Car Gen3 and RZ/G2 devices.
-
-	When compatible with the generic version, nodes must list the
-	SoC-specific version corresponding to the platform first followed by
-	the generic version.
-
-- reg: Offset and length of (1) the register block and (2) the stream buffer.
-       The region for the register block is mandatory.
-       The region for the stream buffer is optional, as it is only present on
-       R-Car Gen2 and RZ/G1 SoCs, and on R-Car H3 (R8A7795), M3-W (R8A77960),
-       M3-W+ (R8A77961), and M3-N (R8A77965).
-- interrupts: A list of interrupt-specifiers, one for each entry in
-	      interrupt-names.
-	      If interrupt-names is not present, an interrupt specifier
-	      for a single muxed interrupt.
-- phy-mode: see ethernet.txt file in the same directory.
-- phy-handle: see ethernet.txt file in the same directory.
-- #address-cells: number of address cells for the MDIO bus, must be equal to 1.
-- #size-cells: number of size cells on the MDIO bus, must be equal to 0.
-- clocks: clock phandle and specifier pair.
-- pinctrl-0: phandle, referring to a default pin configuration node.
-
-Optional properties:
-- interrupt-names: A list of interrupt names.
-		   For the R-Car Gen 3 SoCs this property is mandatory;
-		   it should include one entry per channel, named "ch%u",
-		   where %u is the channel number ranging from 0 to 24.
-		   For other SoCs this property is optional; if present
-		   it should contain "mux" for a single muxed interrupt.
-- pinctrl-names: pin configuration state name ("default").
-- renesas,no-ether-link: boolean, specify when a board does not provide a proper
-			 AVB_LINK signal.
-- renesas,ether-link-active-low: boolean, specify when the AVB_LINK signal is
-				 active-low instead of normal active-high.
-
-Example:
-
-	ethernet@e6800000 {
-		compatible = "renesas,etheravb-r8a7795", "renesas,etheravb-rcar-gen3";
-		reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "ch0", "ch1", "ch2", "ch3",
-				  "ch4", "ch5", "ch6", "ch7",
-				  "ch8", "ch9", "ch10", "ch11",
-				  "ch12", "ch13", "ch14", "ch15",
-				  "ch16", "ch17", "ch18", "ch19",
-				  "ch20", "ch21", "ch22", "ch23",
-				  "ch24";
-		clocks = <&cpg CPG_MOD 812>;
-		power-domains = <&cpg>;
-		phy-mode = "rgmii-id";
-		phy-handle = <&phy0>;
-
-		pinctrl-0 = <&ether_pins>;
-		pinctrl-names = "default";
-		renesas,no-ether-link;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@0 {
-			rxc-skew-ps = <900>;
-			rxdv-skew-ps = <0>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			txc-skew-ps = <900>;
-			txen-skew-ps = <0>;
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-			reg = <0>;
-			interrupt-parent = <&gpio2>;
-			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		};
-	};

Documentation/devicetree/bindings/net/smsc-lan87xx.txt

@@ -5,6 +5,10 @@ through an Ethernet OF device node.
 
 Optional properties:
 
+- clocks:
+  The clock used as phy reference clock and is connected to phy
+  pin XTAL1/CLKIN.
+
 - smsc,disable-energy-detect:
   If set, do not enable energy detect mode for the SMSC phy.
   default: enable energy detect mode

Documentation/devicetree/bindings/net/ti,dp83822.yaml

@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/ti,dp83822.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI DP83822 ethernet PHY
+
+maintainers:
+  - Dan Murphy <dmurphy@ti.com>
+
+description: |
+  The DP83822 is a low-power, single-port, 10/100 Mbps Ethernet PHY. It
+  provides all of the physical layer functions needed to transmit and receive
+  data over standard, twisted-pair cables or to connect to an external,
+  fiber-optic transceiver. Additionally, the DP83822 provides flexibility to
+  connect to a MAC through a standard MII, RMII, or RGMII interface
+
+  Specifications about the Ethernet PHY can be found at:
+    http://www.ti.com/lit/ds/symlink/dp83822i.pdf
+
+allOf:
+  - $ref: "ethernet-phy.yaml#"
+
+properties:
+  reg:
+    maxItems: 1
+
+  ti,link-loss-low:
+    type: boolean
+    description: |
+       DP83822 PHY in Fiber mode only.
+       Sets the DP83822 to detect a link drop condition when the signal goes
+       high.  If not set then link drop will occur when the signal goes low.
+       This property is only applicable if the fiber mode support is strapped
+       to on.
+
+  ti,fiber-mode:
+    type: boolean
+    description: |
+       DP83822 PHY only.
+       If present the DP83822 PHY is configured to operate in fiber mode
+       Fiber mode support can also be strapped. If the strap pin is not set
+       correctly or not set at all then this boolean can be used to enable it.
+       If the fiber mode is not strapped then signal detection for the PHY
+       is disabled.
+       In fiber mode, auto-negotiation is disabled and the PHY can only work in
+       100base-fx (full and half duplex) modes.
+
+  rx-internal-delay-ps:
+    description: |
+       DP83822 PHY only.
+       Setting this property to a non-zero number sets the RX internal delay
+       for the PHY.  The internal delay for the PHY is fixed to 3.5ns relative
+       to receive data.
+
+  tx-internal-delay-ps:
+    description: |
+       DP83822 PHY only.
+       Setting this property to a non-zero number sets the TX internal delay
+       for the PHY.  The internal delay for the PHY is fixed to 3.5ns relative
+       to transmit data.
+
+required:
+  - reg
+
+examples:
+  - |
+    mdio0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ethphy0: ethernet-phy@0 {
+        reg = <0>;
+        rx-internal-delay-ps = <1>;
+        tx-internal-delay-ps = <1>;
+      };
+    };
+
+...

Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt

@@ -65,7 +65,8 @@ Optional properties:
 				     the length can vary between hw versions.
 - <supply-name>-supply: handle to the regulator device tree node
 			   optional "supply-name" are "vdd-0.8-cx-mx",
-			   "vdd-1.8-xo", "vdd-1.3-rfa" and "vdd-3.3-ch0".
+			   "vdd-1.8-xo", "vdd-1.3-rfa", "vdd-3.3-ch0",
+			   and "vdd-3.3-ch1".
 - memory-region:
 	Usage: optional
 	Value type: <phandle>
@@ -204,6 +205,7 @@ wifi@18000000 {
 		vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 		vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 		vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+		vdd-3.3-ch1-supply = <&vreg_l26a_3p3>;
 		memory-region = <&wifi_msa_mem>;
 		iommus = <&apps_smmu 0x0040 0x1>;
 		qcom,msa-fixed-perm;

Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml

@@ -17,7 +17,9 @@ description: |
 
 properties:
   compatible:
-    const: qcom,ipq8074-wifi
+    enum:
+      - qcom,ipq8074-wifi
+      - qcom,ipq6018-wifi
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/ptp/ptp-qoriq.txt

@@ -18,6 +18,8 @@ Clock Properties:
   - fsl,tmr-add      Frequency compensation value.
   - fsl,tmr-fiper1   Fixed interval period pulse generator.
   - fsl,tmr-fiper2   Fixed interval period pulse generator.
+  - fsl,tmr-fiper3   Fixed interval period pulse generator.
+                     Supported only on DPAA2 and ENETC hardware.
   - fsl,max-adj      Maximum frequency adjustment in parts per billion.
   - fsl,extts-fifo   The presence of this property indicates hardware
 		     support for the external trigger stamp FIFO.

Documentation/driver-api/80211/cfg80211.rst

@@ -12,79 +12,32 @@ Device registration
    :doc: Device registration
 
 .. kernel-doc:: include/net/cfg80211.h
-   :functions: ieee80211_channel_flags
+   :functions:
-
+	ieee80211_channel_flags
-.. kernel-doc:: include/net/cfg80211.h
+	ieee80211_channel
-   :functions: ieee80211_channel
+	ieee80211_rate_flags
-
+	ieee80211_rate
-.. kernel-doc:: include/net/cfg80211.h
+	ieee80211_sta_ht_cap
-   :functions: ieee80211_rate_flags
+	ieee80211_supported_band
-
+	cfg80211_signal_type
-.. kernel-doc:: include/net/cfg80211.h
+	wiphy_params_flags
-   :functions: ieee80211_rate
+	wiphy_flags
-
+	wiphy
-.. kernel-doc:: include/net/cfg80211.h
+	wireless_dev
-   :functions: ieee80211_sta_ht_cap
+	wiphy_new
-
+	wiphy_read_of_freq_limits
-.. kernel-doc:: include/net/cfg80211.h
+	wiphy_register
-   :functions: ieee80211_supported_band
+	wiphy_unregister
-
+	wiphy_free
-.. kernel-doc:: include/net/cfg80211.h
+	wiphy_name
-   :functions: cfg80211_signal_type
+	wiphy_dev
-
+	wiphy_priv
-.. kernel-doc:: include/net/cfg80211.h
+	priv_to_wiphy
-   :functions: wiphy_params_flags
+	set_wiphy_dev
-
+	wdev_priv
-.. kernel-doc:: include/net/cfg80211.h
+	ieee80211_iface_limit
-   :functions: wiphy_flags
+	ieee80211_iface_combination
-
+	cfg80211_check_combinations
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: wiphy
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: wireless_dev
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: wiphy_new
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: wiphy_read_of_freq_limits
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: wiphy_register
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: wiphy_unregister
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: wiphy_free
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: wiphy_name
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: wiphy_dev
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: wiphy_priv
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: priv_to_wiphy
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: set_wiphy_dev
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: wdev_priv
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: ieee80211_iface_limit
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: ieee80211_iface_combination
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_check_combinations
 
 Actions and configuration
 =========================
@@ -93,139 +46,52 @@ Actions and configuration
    :doc: Actions and configuration
 
 .. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_ops
+   :functions:
-
+	cfg80211_ops
-.. kernel-doc:: include/net/cfg80211.h
+	vif_params
-   :functions: vif_params
+	key_params
-
+	survey_info_flags
-.. kernel-doc:: include/net/cfg80211.h
+	survey_info
-   :functions: key_params
+	cfg80211_beacon_data
-
+	cfg80211_ap_settings
-.. kernel-doc:: include/net/cfg80211.h
+	station_parameters
-   :functions: survey_info_flags
+	rate_info_flags
-
+	rate_info
-.. kernel-doc:: include/net/cfg80211.h
+	station_info
-   :functions: survey_info
+	monitor_flags
-
+	mpath_info_flags
-.. kernel-doc:: include/net/cfg80211.h
+	mpath_info
-   :functions: cfg80211_beacon_data
+	bss_parameters
-
+	ieee80211_txq_params
-.. kernel-doc:: include/net/cfg80211.h
+	cfg80211_crypto_settings
-   :functions: cfg80211_ap_settings
+	cfg80211_auth_request
-
+	cfg80211_assoc_request
-.. kernel-doc:: include/net/cfg80211.h
+	cfg80211_deauth_request
-   :functions: station_parameters
+	cfg80211_disassoc_request
-
+	cfg80211_ibss_params
-.. kernel-doc:: include/net/cfg80211.h
+	cfg80211_connect_params
-   :functions: rate_info_flags
+	cfg80211_pmksa
-
+	cfg80211_rx_mlme_mgmt
-.. kernel-doc:: include/net/cfg80211.h
+	cfg80211_auth_timeout
-   :functions: rate_info
+	cfg80211_rx_assoc_resp
-
+	cfg80211_assoc_timeout
-.. kernel-doc:: include/net/cfg80211.h
+	cfg80211_tx_mlme_mgmt
-   :functions: station_info
+	cfg80211_ibss_joined
-
+	cfg80211_connect_resp_params
-.. kernel-doc:: include/net/cfg80211.h
+	cfg80211_connect_done
-   :functions: monitor_flags
+	cfg80211_connect_result
-
+	cfg80211_connect_bss
-.. kernel-doc:: include/net/cfg80211.h
+	cfg80211_connect_timeout
-   :functions: mpath_info_flags
+	cfg80211_roamed
-
+	cfg80211_disconnected
-.. kernel-doc:: include/net/cfg80211.h
+	cfg80211_ready_on_channel
-   :functions: mpath_info
+	cfg80211_remain_on_channel_expired
-
+	cfg80211_new_sta
-.. kernel-doc:: include/net/cfg80211.h
+	cfg80211_rx_mgmt
-   :functions: bss_parameters
+	cfg80211_mgmt_tx_status
-
+	cfg80211_cqm_rssi_notify
-.. kernel-doc:: include/net/cfg80211.h
+	cfg80211_cqm_pktloss_notify
-   :functions: ieee80211_txq_params
+	cfg80211_michael_mic_failure
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_crypto_settings
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_auth_request
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_assoc_request
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_deauth_request
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_disassoc_request
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_ibss_params
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_connect_params
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_pmksa
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_rx_mlme_mgmt
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_auth_timeout
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_rx_assoc_resp
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_assoc_timeout
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_tx_mlme_mgmt
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_ibss_joined
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_connect_resp_params
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_connect_done
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_connect_result
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_connect_bss
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_connect_timeout
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_roamed
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_disconnected
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_ready_on_channel
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_remain_on_channel_expired
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_new_sta
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_rx_mgmt
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_mgmt_tx_status
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_cqm_rssi_notify
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_cqm_pktloss_notify
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_michael_mic_failure
 
 Scanning and BSS list handling
 ==============================
@@ -234,34 +100,17 @@ Scanning and BSS list handling
    :doc: Scanning and BSS list handling
 
 .. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_ssid
+   :functions:
-
+	cfg80211_ssid
-.. kernel-doc:: include/net/cfg80211.h
+	cfg80211_scan_request
-   :functions: cfg80211_scan_request
+	cfg80211_scan_done
-
+	cfg80211_bss
-.. kernel-doc:: include/net/cfg80211.h
+	cfg80211_inform_bss
-   :functions: cfg80211_scan_done
+	cfg80211_inform_bss_frame_data
-
+	cfg80211_inform_bss_data
-.. kernel-doc:: include/net/cfg80211.h
+	cfg80211_unlink_bss
-   :functions: cfg80211_bss
+	cfg80211_find_ie
-
+	ieee80211_bss_get_ie
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_inform_bss
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_inform_bss_frame_data
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_inform_bss_data
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_unlink_bss
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_find_ie
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: ieee80211_bss_get_ie
 
 Utility functions
 =================
@@ -270,25 +119,14 @@ Utility functions
    :doc: Utility functions
 
 .. kernel-doc:: include/net/cfg80211.h
-   :functions: ieee80211_channel_to_frequency
+   :functions:
-
+	ieee80211_channel_to_frequency
-.. kernel-doc:: include/net/cfg80211.h
+	ieee80211_frequency_to_channel
-   :functions: ieee80211_frequency_to_channel
+	ieee80211_get_channel
-
+	ieee80211_get_response_rate
-.. kernel-doc:: include/net/cfg80211.h
+	ieee80211_hdrlen
-   :functions: ieee80211_get_channel
+	ieee80211_get_hdrlen_from_skb
-
+	ieee80211_radiotap_iterator
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: ieee80211_get_response_rate
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: ieee80211_hdrlen
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: ieee80211_get_hdrlen_from_skb
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: ieee80211_radiotap_iterator
 
 Data path helpers
 =================
@@ -297,13 +135,10 @@ Data path helpers
    :doc: Data path helpers
 
 .. kernel-doc:: include/net/cfg80211.h
-   :functions: ieee80211_data_to_8023
+   :functions:
-
+	ieee80211_data_to_8023
-.. kernel-doc:: include/net/cfg80211.h
+	ieee80211_amsdu_to_8023s
-   :functions: ieee80211_amsdu_to_8023s
+	cfg80211_classify8021d
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_classify8021d
 
 Regulatory enforcement infrastructure
 =====================================
@@ -312,13 +147,10 @@ Regulatory enforcement infrastructure
    :doc: Regulatory enforcement infrastructure
 
 .. kernel-doc:: include/net/cfg80211.h
-   :functions: regulatory_hint
+   :functions:
-
+	regulatory_hint
-.. kernel-doc:: include/net/cfg80211.h
+	wiphy_apply_custom_regulatory
-   :functions: wiphy_apply_custom_regulatory
+	freq_reg_info
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: freq_reg_info
 
 RFkill integration
 ==================
@@ -327,13 +159,10 @@ RFkill integration
    :doc: RFkill integration
 
 .. kernel-doc:: include/net/cfg80211.h
-   :functions: wiphy_rfkill_set_hw_state
+   :functions:
-
+	wiphy_rfkill_set_hw_state
-.. kernel-doc:: include/net/cfg80211.h
+	wiphy_rfkill_start_polling
-   :functions: wiphy_rfkill_start_polling
+	wiphy_rfkill_stop_polling
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: wiphy_rfkill_stop_polling
 
 Test mode
 =========
@@ -342,13 +171,8 @@ Test mode
    :doc: Test mode
 
 .. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_testmode_alloc_reply_skb
+   :functions:
-
+	cfg80211_testmode_alloc_reply_skb
-.. kernel-doc:: include/net/cfg80211.h
+	cfg80211_testmode_reply
-   :functions: cfg80211_testmode_reply
+	cfg80211_testmode_alloc_event_skb
-
+	cfg80211_testmode_event
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_testmode_alloc_event_skb
-
-.. kernel-doc:: include/net/cfg80211.h
-   :functions: cfg80211_testmode_event

Documentation/driver-api/80211/mac80211-advanced.rst

@@ -15,25 +15,14 @@ appropriate trigger, which will then be triggered appropriately by
 mac80211.
 
 .. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_get_tx_led_name
+   :functions:
-
+	ieee80211_get_tx_led_name
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_get_rx_led_name
-   :functions: ieee80211_get_rx_led_name
+	ieee80211_get_assoc_led_name
-
+	ieee80211_get_radio_led_name
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_tpt_blink
-   :functions: ieee80211_get_assoc_led_name
+	ieee80211_tpt_led_trigger_flags
-
+	ieee80211_create_tpt_led_trigger
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_get_radio_led_name
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_tpt_blink
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_tpt_led_trigger_flags
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_create_tpt_led_trigger
 
 Hardware crypto acceleration
 ============================
@@ -42,22 +31,13 @@ Hardware crypto acceleration
    :doc: Hardware crypto acceleration
 
 .. kernel-doc:: include/net/mac80211.h
-   :functions: set_key_cmd
+   :functions:
-
+	set_key_cmd
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_key_conf
-   :functions: ieee80211_key_conf
+	ieee80211_key_flags
-
+	ieee80211_get_tkip_p1k
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_get_tkip_p1k_iv
-   :functions: ieee80211_key_flags
+	ieee80211_get_tkip_p2k
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_get_tkip_p1k
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_get_tkip_p1k_iv
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_get_tkip_p2k
 
 Powersave support
 =================
@@ -99,28 +79,15 @@ support for powersaving clients
    :doc: AP support for powersaving clients
 
 .. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_get_buffered_bc
+   :functions:
-
+	ieee80211_get_buffered_bc
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_beacon_get
-   :functions: ieee80211_beacon_get
+	ieee80211_sta_eosp
-
+	ieee80211_frame_release_type
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_sta_ps_transition
-   :functions: ieee80211_sta_eosp
+	ieee80211_sta_ps_transition_ni
-
+	ieee80211_sta_set_buffered
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_sta_block_awake
-   :functions: ieee80211_frame_release_type
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_sta_ps_transition
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_sta_ps_transition_ni
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_sta_set_buffered
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_sta_block_awake
 
 Supporting multiple virtual interfaces
 ======================================
@@ -134,10 +101,9 @@ addresses here, note which configurations are supported by mac80211, add
 notes about supporting hw crypto with it.
 
 .. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_iterate_active_interfaces
+   :functions:
-
+	ieee80211_iterate_active_interfaces
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_iterate_active_interfaces_atomic
-   :functions: ieee80211_iterate_active_interfaces_atomic
 
 Station handling
 ================
@@ -145,16 +111,11 @@ Station handling
 TODO
 
 .. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_sta
+   :functions:
-
+	ieee80211_sta
-.. kernel-doc:: include/net/mac80211.h
+	sta_notify_cmd
-   :functions: sta_notify_cmd
+	ieee80211_find_sta
-
+	ieee80211_find_sta_by_ifaddr
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_find_sta
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_find_sta_by_ifaddr
 
 Hardware scan offload
 =====================
@@ -193,10 +154,9 @@ Spatial Multiplexing Powersave (SMPS)
    :doc: Spatial multiplexing power save
 
 .. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_request_smps
+   :functions:
-
+	ieee80211_request_smps
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_smps_mode
-   :functions: ieee80211_smps_mode
 
 TBD
 
@@ -209,22 +169,13 @@ Rate Control API
 TBD
 
 .. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_start_tx_ba_session
+   :functions:
-
+	ieee80211_start_tx_ba_session
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_start_tx_ba_cb_irqsafe
-   :functions: ieee80211_start_tx_ba_cb_irqsafe
+	ieee80211_stop_tx_ba_session
-
+	ieee80211_stop_tx_ba_cb_irqsafe
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_rate_control_changed
-   :functions: ieee80211_stop_tx_ba_session
+	ieee80211_tx_rate_control
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_stop_tx_ba_cb_irqsafe
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_rate_control_changed
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_tx_rate_control
 
 TBD
 
@@ -261,10 +212,9 @@ Programming information
 -----------------------
 
 .. kernel-doc:: net/mac80211/sta_info.h
-   :functions: sta_info
+   :functions:
-
+	sta_info
-.. kernel-doc:: net/mac80211/sta_info.h
+	ieee80211_sta_info_flags
-   :functions: ieee80211_sta_info_flags
 
 STA information lifetime rules
 ------------------------------
@@ -276,13 +226,10 @@ Aggregation Functions
 =====================
 
 .. kernel-doc:: net/mac80211/sta_info.h
-   :functions: sta_ampdu_mlme
+   :functions:
-
+	sta_ampdu_mlme
-.. kernel-doc:: net/mac80211/sta_info.h
+	tid_ampdu_tx
-   :functions: tid_ampdu_tx
+	tid_ampdu_rx
-
-.. kernel-doc:: net/mac80211/sta_info.h
-   :functions: tid_ampdu_rx
 
 Synchronisation Functions
 =========================

Documentation/driver-api/80211/mac80211.rst

@@ -30,31 +30,16 @@ Finally, a discussion of hardware capabilities should be done with
 references to other parts of the book.
 
 .. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_hw
+   :functions:
-
+	ieee80211_hw
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_hw_flags
-   :functions: ieee80211_hw_flags
+	SET_IEEE80211_DEV
-
+	SET_IEEE80211_PERM_ADDR
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_ops
-   :functions: SET_IEEE80211_DEV
+	ieee80211_alloc_hw
-
+	ieee80211_register_hw
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_unregister_hw
-   :functions: SET_IEEE80211_PERM_ADDR
+	ieee80211_free_hw
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_ops
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_alloc_hw
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_register_hw
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_unregister_hw
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_free_hw
 
 PHY configuration
 =================
@@ -65,10 +50,9 @@ This chapter should describe PHY handling including start/stop callbacks
 and the various structures used.
 
 .. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_conf
+   :functions:
-
+	ieee80211_conf
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_conf_flags
-   :functions: ieee80211_conf_flags
 
 Virtual interfaces
 ==================
@@ -123,79 +107,32 @@ functions/definitions
 ---------------------
 
 .. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_rx_status
+   :functions:
-
+	ieee80211_rx_status
-.. kernel-doc:: include/net/mac80211.h
+	mac80211_rx_encoding_flags
-   :functions: mac80211_rx_encoding_flags
+	mac80211_rx_flags
-
+	mac80211_tx_info_flags
-.. kernel-doc:: include/net/mac80211.h
+	mac80211_tx_control_flags
-   :functions: mac80211_rx_flags
+	mac80211_rate_control_flags
-
+	ieee80211_tx_rate
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_tx_info
-   :functions: mac80211_tx_info_flags
+	ieee80211_tx_info_clear_status
-
+	ieee80211_rx
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_rx_ni
-   :functions: mac80211_tx_control_flags
+	ieee80211_rx_irqsafe
-
+	ieee80211_tx_status
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_tx_status_ni
-   :functions: mac80211_rate_control_flags
+	ieee80211_tx_status_irqsafe
-
+	ieee80211_rts_get
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_rts_duration
-   :functions: ieee80211_tx_rate
+	ieee80211_ctstoself_get
-
+	ieee80211_ctstoself_duration
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_generic_frame_duration
-   :functions: ieee80211_tx_info
+	ieee80211_wake_queue
-
+	ieee80211_stop_queue
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_wake_queues
-   :functions: ieee80211_tx_info_clear_status
+	ieee80211_stop_queues
-
+	ieee80211_queue_stopped
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_rx
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_rx_ni
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_rx_irqsafe
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_tx_status
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_tx_status_ni
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_tx_status_irqsafe
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_rts_get
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_rts_duration
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_ctstoself_get
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_ctstoself_duration
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_generic_frame_duration
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_wake_queue
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_stop_queue
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_wake_queues
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_stop_queues
-
-.. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_queue_stopped
 
 Frame filtering
 ===============
@@ -213,7 +150,6 @@ The mac80211 workqueue
    :doc: mac80211 workqueue
 
 .. kernel-doc:: include/net/mac80211.h
-   :functions: ieee80211_queue_work
+   :functions:
-
+	ieee80211_queue_work
-.. kernel-doc:: include/net/mac80211.h
+	ieee80211_queue_delayed_work
-   :functions: ieee80211_queue_delayed_work

Documentation/networking/af_xdp.rst

@@ -258,14 +258,21 @@ socket into zero-copy mode or fail.
 XDP_SHARED_UMEM bind flag
 -------------------------
 
-This flag enables you to bind multiple sockets to the same UMEM, but
+This flag enables you to bind multiple sockets to the same UMEM. It
-only if they share the same queue id. In this mode, each socket has
+works on the same queue id, between queue ids and between
-their own RX and TX rings, but the UMEM (tied to the fist socket
+netdevs/devices. In this mode, each socket has their own RX and TX
-created) only has a single FILL ring and a single COMPLETION
+rings as usual, but you are going to have one or more FILL and
-ring. To use this mode, create the first socket and bind it in the normal
+COMPLETION ring pairs. You have to create one of these pairs per
-way. Create a second socket and create an RX and a TX ring, or at
+unique netdev and queue id tuple that you bind to.
-least one of them, but no FILL or COMPLETION rings as the ones from
+
-the first socket will be used. In the bind call, set he
+Starting with the case were we would like to share a UMEM between
+sockets bound to the same netdev and queue id. The UMEM (tied to the
+fist socket created) will only have a single FILL ring and a single
+COMPLETION ring as there is only on unique netdev,queue_id tuple that
+we have bound to. To use this mode, create the first socket and bind
+it in the normal way. Create a second socket and create an RX and a TX
+ring, or at least one of them, but no FILL or COMPLETION rings as the
+ones from the first socket will be used. In the bind call, set he
 XDP_SHARED_UMEM option and provide the initial socket's fd in the
 sxdp_shared_umem_fd field. You can attach an arbitrary number of extra
 sockets this way.
@@ -305,11 +312,41 @@ concurrently. There are no synchronization primitives in the
 libbpf code that protects multiple users at this point in time.
 
 Libbpf uses this mode if you create more than one socket tied to the
-same umem. However, note that you need to supply the
+same UMEM. However, note that you need to supply the
 XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD libbpf_flag with the
 xsk_socket__create calls and load your own XDP program as there is no
 built in one in libbpf that will route the traffic for you.
 
+The second case is when you share a UMEM between sockets that are
+bound to different queue ids and/or netdevs. In this case you have to
+create one FILL ring and one COMPLETION ring for each unique
+netdev,queue_id pair. Let us say you want to create two sockets bound
+to two different queue ids on the same netdev. Create the first socket
+and bind it in the normal way. Create a second socket and create an RX
+and a TX ring, or at least one of them, and then one FILL and
+COMPLETION ring for this socket. Then in the bind call, set he
+XDP_SHARED_UMEM option and provide the initial socket's fd in the
+sxdp_shared_umem_fd field as you registered the UMEM on that
+socket. These two sockets will now share one and the same UMEM.
+
+There is no need to supply an XDP program like the one in the previous
+case where sockets were bound to the same queue id and
+device. Instead, use the NIC's packet steering capabilities to steer
+the packets to the right queue. In the previous example, there is only
+one queue shared among sockets, so the NIC cannot do this steering. It
+can only steer between queues.
+
+In libbpf, you need to use the xsk_socket__create_shared() API as it
+takes a reference to a FILL ring and a COMPLETION ring that will be
+created for you and bound to the shared UMEM. You can use this
+function for all the sockets you create, or you can use it for the
+second and following ones and use xsk_socket__create() for the first
+one. Both methods yield the same result.
+
+Note that a UMEM can be shared between sockets on the same queue id
+and device, as well as between queues on the same device and between
+devices at the same time.
+
 XDP_USE_NEED_WAKEUP bind flag
 -----------------------------
 
@@ -364,7 +401,7 @@ resources by only setting up one of them. Both the FILL ring and the
 COMPLETION ring are mandatory as you need to have a UMEM tied to your
 socket. But if the XDP_SHARED_UMEM flag is used, any socket after the
 first one does not have a UMEM and should in that case not have any
-FILL or COMPLETION rings created as the ones from the shared umem will
+FILL or COMPLETION rings created as the ones from the shared UMEM will
 be used. Note, that the rings are single-producer single-consumer, so
 do not try to access them from multiple processes at the same
 time. See the XDP_SHARED_UMEM section.
@@ -567,6 +604,17 @@ A: The short answer is no, that is not supported at the moment. The
    switch, or other distribution mechanism, in your NIC to direct
    traffic to the correct queue id and socket.
 
+Q: My packets are sometimes corrupted. What is wrong?
+
+A: Care has to be taken not to feed the same buffer in the UMEM into
+   more than one ring at the same time. If you for example feed the
+   same buffer into the FILL ring and the TX ring at the same time, the
+   NIC might receive data into the buffer at the same time it is
+   sending it. This will cause some packets to become corrupted. Same
+   thing goes for feeding the same buffer into the FILL rings
+   belonging to different queue ids or netdevs bound with the
+   XDP_SHARED_UMEM flag.
+
 Credits
 =======
 

Documentation/networking/caif/index.rst

@@ -10,4 +10,3 @@ Contents:
 
    linux_caif
    caif
-   spi_porting

Documentation/networking/caif/spi_porting.rst

@@ -1,229 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-================
-CAIF SPI porting
-================
-
-CAIF SPI basics
-===============
-
-Running CAIF over SPI needs some extra setup, owing to the nature of SPI.
-Two extra GPIOs have been added in order to negotiate the transfers
-between the master and the slave. The minimum requirement for running
-CAIF over SPI is a SPI slave chip and two GPIOs (more details below).
-Please note that running as a slave implies that you need to keep up
-with the master clock. An overrun or underrun event is fatal.
-
-CAIF SPI framework
-==================
-
-To make porting as easy as possible, the CAIF SPI has been divided in
-two parts. The first part (called the interface part) deals with all
-generic functionality such as length framing, SPI frame negotiation
-and SPI frame delivery and transmission. The other part is the CAIF
-SPI slave device part, which is the module that you have to write if
-you want to run SPI CAIF on a new hardware. This part takes care of
-the physical hardware, both with regard to SPI and to GPIOs.
-
-- Implementing a CAIF SPI device:
-
-	- Functionality provided by the CAIF SPI slave device:
-
-	In order to implement a SPI device you will, as a minimum,
-	need to implement the following
-	functions:
-
-	::
-
-	    int (*init_xfer) (struct cfspi_xfer * xfer, struct cfspi_dev *dev):
-
-	This function is called by the CAIF SPI interface to give
-	you a chance to set up your hardware to be ready to receive
-	a stream of data from the master. The xfer structure contains
-	both physical and logical addresses, as well as the total length
-	of the transfer in both directions.The dev parameter can be used
-	to map to different CAIF SPI slave devices.
-
-	::
-
-	    void (*sig_xfer) (bool xfer, struct cfspi_dev *dev):
-
-	This function is called by the CAIF SPI interface when the output
-	(SPI_INT) GPIO needs to change state. The boolean value of the xfer
-	variable indicates whether the GPIO should be asserted (HIGH) or
-	deasserted (LOW). The dev parameter can be used to map to different CAIF
-	SPI slave devices.
-
-	- Functionality provided by the CAIF SPI interface:
-
-	::
-
-	    void (*ss_cb) (bool assert, struct cfspi_ifc *ifc);
-
-	This function is called by the CAIF SPI slave device in order to
-	signal a change of state of the input GPIO (SS) to the interface.
-	Only active edges are mandatory to be reported.
-	This function can be called from IRQ context (recommended in order
-	not to introduce latency). The ifc parameter should be the pointer
-	returned from the platform probe function in the SPI device structure.
-
-	::
-
-	    void (*xfer_done_cb) (struct cfspi_ifc *ifc);
-
-	This function is called by the CAIF SPI slave device in order to
-	report that a transfer is completed. This function should only be
-	called once both the transmission and the reception are completed.
-	This function can be called from IRQ context (recommended in order
-	not to introduce latency). The ifc parameter should be the pointer
-	returned from the platform probe function in the SPI device structure.
-
-	- Connecting the bits and pieces:
-
-		- Filling in the SPI slave device structure:
-
-		  Connect the necessary callback functions.
-
-		  Indicate clock speed (used to calculate toggle delays).
-
-		  Chose a suitable name (helps debugging if you use several CAIF
-		  SPI slave devices).
-
-		  Assign your private data (can be used to map to your
-		  structure).
-
-		- Filling in the SPI slave platform device structure:
-
-		  Add name of driver to connect to ("cfspi_sspi").
-
-		  Assign the SPI slave device structure as platform data.
-
-Padding
-=======
-
-In order to optimize throughput, a number of SPI padding options are provided.
-Padding can be enabled independently for uplink and downlink transfers.
-Padding can be enabled for the head, the tail and for the total frame size.
-The padding needs to be correctly configured on both sides of the link.
-The padding can be changed via module parameters in cfspi_sspi.c or via
-the sysfs directory of the cfspi_sspi driver (before device registration).
-
-- CAIF SPI device template::
-
-    /*
-    *	Copyright (C) ST-Ericsson AB 2010
-    *	Author: Daniel Martensson / Daniel.Martensson@stericsson.com
-    *	License terms: GNU General Public License (GPL), version 2.
-    *
-    */
-
-    #include <linux/init.h>
-    #include <linux/module.h>
-    #include <linux/device.h>
-    #include <linux/wait.h>
-    #include <linux/interrupt.h>
-    #include <linux/dma-mapping.h>
-    #include <net/caif/caif_spi.h>
-
-    MODULE_LICENSE("GPL");
-
-    struct sspi_struct {
-	    struct cfspi_dev sdev;
-	    struct cfspi_xfer *xfer;
-    };
-
-    static struct sspi_struct slave;
-    static struct platform_device slave_device;
-
-    static irqreturn_t sspi_irq(int irq, void *arg)
-    {
-	    /* You only need to trigger on an edge to the active state of the
-	    * SS signal. Once a edge is detected, the ss_cb() function should be
-	    * called with the parameter assert set to true. It is OK
-	    * (and even advised) to call the ss_cb() function in IRQ context in
-	    * order not to add any delay. */
-
-	    return IRQ_HANDLED;
-    }
-
-    static void sspi_complete(void *context)
-    {
-	    /* Normally the DMA or the SPI framework will call you back
-	    * in something similar to this. The only thing you need to
-	    * do is to call the xfer_done_cb() function, providing the pointer
-	    * to the CAIF SPI interface. It is OK to call this function
-	    * from IRQ context. */
-    }
-
-    static int sspi_init_xfer(struct cfspi_xfer *xfer, struct cfspi_dev *dev)
-    {
-	    /* Store transfer info. For a normal implementation you should
-	    * set up your DMA here and make sure that you are ready to
-	    * receive the data from the master SPI. */
-
-	    struct sspi_struct *sspi = (struct sspi_struct *)dev->priv;
-
-	    sspi->xfer = xfer;
-
-	    return 0;
-    }
-
-    void sspi_sig_xfer(bool xfer, struct cfspi_dev *dev)
-    {
-	    /* If xfer is true then you should assert the SPI_INT to indicate to
-	    * the master that you are ready to receive the data from the master
-	    * SPI. If xfer is false then you should de-assert SPI_INT to indicate
-	    * that the transfer is done.
-	    */
-
-	    struct sspi_struct *sspi = (struct sspi_struct *)dev->priv;
-    }
-
-    static void sspi_release(struct device *dev)
-    {
-	    /*
-	    * Here you should release your SPI device resources.
-	    */
-    }
-
-    static int __init sspi_init(void)
-    {
-	    /* Here you should initialize your SPI device by providing the
-	    * necessary functions, clock speed, name and private data. Once
-	    * done, you can register your device with the
-	    * platform_device_register() function. This function will return
-	    * with the CAIF SPI interface initialized. This is probably also
-	    * the place where you should set up your GPIOs, interrupts and SPI
-	    * resources. */
-
-	    int res = 0;
-
-	    /* Initialize slave device. */
-	    slave.sdev.init_xfer = sspi_init_xfer;
-	    slave.sdev.sig_xfer = sspi_sig_xfer;
-	    slave.sdev.clk_mhz = 13;
-	    slave.sdev.priv = &slave;
-	    slave.sdev.name = "spi_sspi";
-	    slave_device.dev.release = sspi_release;
-
-	    /* Initialize platform device. */
-	    slave_device.name = "cfspi_sspi";
-	    slave_device.dev.platform_data = &slave.sdev;
-
-	    /* Register platform device. */
-	    res = platform_device_register(&slave_device);
-	    if (res) {
-		    printk(KERN_WARNING "sspi_init: failed to register dev.\n");
-		    return -ENODEV;
-	    }
-
-	    return res;
-    }
-
-    static void __exit sspi_exit(void)
-    {
-	    platform_device_del(&slave_device);
-    }
-
-    module_init(sspi_init);
-    module_exit(sspi_exit);

Documentation/networking/device_drivers/ethernet/amazon/ena.rst

@@ -39,16 +39,6 @@ debug logs.
 Some of the ENA devices support a working mode called Low-latency
 Queue (LLQ), which saves several more microseconds.
 
-Supported PCI vendor ID/device IDs
-==================================
-
-=========   =======================
-1d0f:0ec2   ENA PF
-1d0f:1ec2   ENA PF with LLQ support
-1d0f:ec20   ENA VF
-1d0f:ec21   ENA VF with LLQ support
-=========   =======================
-
 ENA Source Code Directory Structure
 ===================================
 
@@ -212,20 +202,11 @@ In adaptive interrupt moderation mode the interrupt delay value is
 updated by the driver dynamically and adjusted every NAPI cycle
 according to the traffic nature.
 
-By default ENA driver applies adaptive coalescing on Rx traffic and
-conventional coalescing on Tx traffic.
-
 Adaptive coalescing can be switched on/off through ethtool(8)
 adaptive_rx on|off parameter.
 
-The driver chooses interrupt delay value according to the number of
+More information about Adaptive Interrupt Moderation (DIM) can be found in
-bytes and packets received between interrupt unmasking and interrupt
+Documentation/networking/net_dim.rst
-posting. The driver uses interrupt delay table that subdivides the
-range of received bytes/packets into 5 levels and assigns interrupt
-delay value to each level.
-
-The user can enable/disable adaptive moderation, modify the interrupt
-delay table and restore its default values through sysfs.
 
 RX copybreak
 ============
@@ -274,7 +255,7 @@ RSS
   inputs for hash functions.
 - The driver configures RSS settings using the AQ SetFeature command
   (ENA_ADMIN_RSS_HASH_FUNCTION, ENA_ADMIN_RSS_HASH_INPUT and
-  ENA_ADMIN_RSS_REDIRECTION_TABLE_CONFIG properties).
+  ENA_ADMIN_RSS_INDIRECTION_TABLE_CONFIG properties).
 - If the NETIF_F_RXHASH flag is set, the 32-bit result of the hash
   function delivered in the Rx CQ descriptor is set in the received
   SKB.

Documentation/networking/devlink/devlink-flash.rst

@@ -16,6 +16,34 @@ Note that the file name is a path relative to the firmware loading path
 (usually ``/lib/firmware/``). Drivers may send status updates to inform
 user space about the progress of the update operation.
 
+Overwrite Mask
+==============
+
+The ``devlink-flash`` command allows optionally specifying a mask indicating
+how the device should handle subsections of flash components when updating.
+This mask indicates the set of sections which are allowed to be overwritten.
+
+.. list-table:: List of overwrite mask bits
+   :widths: 5 95
+
+   * - Name
+     - Description
+   * - ``DEVLINK_FLASH_OVERWRITE_SETTINGS``
+     - Indicates that the device should overwrite settings in the components
+       being updated with the settings found in the provided image.
+   * - ``DEVLINK_FLASH_OVERWRITE_IDENTIFIERS``
+     - Indicates that the device should overwrite identifiers in the
+       components being updated with the identifiers found in the provided
+       image. This includes MAC addresses, serial IDs, and similar device
+       identifiers.
+
+Multiple overwrite bits may be combined and requested together. If no bits
+are provided, it is expected that the device only update firmware binaries
+in the components being updated. Settings and identifiers are expected to be
+preserved across the update. A device may not support every combination and
+the driver for such a device must reject any combination which cannot be
+faithfully implemented.
+
 Firmware Loading
 ================
 

Documentation/networking/devlink/devlink-params.rst

@@ -108,3 +108,9 @@ own name.
    * - ``region_snapshot_enable``
      - Boolean
      - Enable capture of ``devlink-region`` snapshots.
+   * - ``enable_remote_dev_reset``
+     - Boolean
+     - Enable device reset by remote host. When cleared, the device driver
+       will NACK any attempt of other host to reset the device. This parameter
+       is useful for setups where a device is shared by different hosts, such
+       as multi-host setup.

Documentation/networking/devlink/devlink-reload.rst

@@ -0,0 +1,81 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============
+Devlink Reload
+==============
+
+``devlink-reload`` provides mechanism to reinit driver entities, applying
+``devlink-params`` and ``devlink-resources`` new values. It also provides
+mechanism to activate firmware.
+
+Reload Actions
+==============
+
+User may select a reload action.
+By default ``driver_reinit`` action is selected.
+
+.. list-table:: Possible reload actions
+   :widths: 5 90
+
+   * - Name
+     - Description
+   * - ``driver-reinit``
+     - Devlink driver entities re-initialization, including applying
+       new values to devlink entities which are used during driver
+       load such as ``devlink-params`` in configuration mode
+       ``driverinit`` or ``devlink-resources``
+   * - ``fw_activate``
+     - Firmware activate. Activates new firmware if such image is stored and
+       pending activation. If no limitation specified this action may involve
+       firmware reset. If no new image pending this action will reload current
+       firmware image.
+
+Note that even though user asks for a specific action, the driver
+implementation might require to perform another action alongside with
+it. For example, some driver do not support driver reinitialization
+being performed without fw activation. Therefore, the devlink reload
+command returns the list of actions which were actrually performed.
+
+Reload Limits
+=============
+
+By default reload actions are not limited and driver implementation may
+include reset or downtime as needed to perform the actions.
+
+However, some drivers support action limits, which limit the action
+implementation to specific constraints.
+
+.. list-table:: Possible reload limits
+   :widths: 5 90
+
+   * - Name
+     - Description
+   * - ``no_reset``
+     - No reset allowed, no down time allowed, no link flap and no
+       configuration is lost.
+
+Change Namespace
+================
+
+The netns option allows user to be able to move devlink instances into
+namespaces during devlink reload operation.
+By default all devlink instances are created in init_net and stay there.
+
+example usage
+-------------
+
+.. code:: shell
+
+    $ devlink dev reload help
+    $ devlink dev reload DEV [ netns { PID | NAME | ID } ] [ action { driver_reinit | fw_activate } ] [ limit no_reset ]
+
+    # Run reload command for devlink driver entities re-initialization:
+    $ devlink dev reload pci/0000:82:00.0 action driver_reinit
+    reload_actions_performed:
+      driver_reinit
+
+    # Run reload command to activate firmware:
+    # Note that mlx5 driver reloads the driver while activating firmware
+    $ devlink dev reload pci/0000:82:00.0 action fw_activate
+    reload_actions_performed:
+      driver_reinit fw_activate

Documentation/networking/devlink/devlink-trap.rst

@@ -409,6 +409,73 @@ be added to the following table:
      - ``drop``
      - Traps packets dropped due to the RED (Random Early Detection) algorithm
        (i.e., early drops)
+   * - ``vxlan_parsing``
+     - ``drop``
+     - Traps packets dropped due to an error in the VXLAN header parsing which
+       might be because of packet truncation or the I flag is not set.
+   * - ``llc_snap_parsing``
+     - ``drop``
+     - Traps packets dropped due to an error in the LLC+SNAP header parsing
+   * - ``vlan_parsing``
+     - ``drop``
+     - Traps packets dropped due to an error in the VLAN header parsing. Could
+       include unexpected packet truncation.
+   * - ``pppoe_ppp_parsing``
+     - ``drop``
+     - Traps packets dropped due to an error in the PPPoE+PPP header parsing.
+       This could include finding a session ID of 0xFFFF (which is reserved and
+       not for use), a PPPoE length which is larger than the frame received or
+       any common error on this type of header
+   * - ``mpls_parsing``
+     - ``drop``
+     - Traps packets dropped due to an error in the MPLS header parsing which
+       could include unexpected header truncation
+   * - ``arp_parsing``
+     - ``drop``
+     - Traps packets dropped due to an error in the ARP header parsing
+   * - ``ip_1_parsing``
+     - ``drop``
+     - Traps packets dropped due to an error in the first IP header parsing.
+       This packet trap could include packets which do not pass an IP checksum
+       check, a header length check (a minimum of 20 bytes), which might suffer
+       from packet truncation thus the total length field exceeds the received
+       packet length etc
+   * - ``ip_n_parsing``
+     - ``drop``
+     - Traps packets dropped due to an error in the parsing of the last IP
+       header (the inner one in case of an IP over IP tunnel). The same common
+       error checking is performed here as for the ip_1_parsing trap
+   * - ``gre_parsing``
+     - ``drop``
+     - Traps packets dropped due to an error in the GRE header parsing
+   * - ``udp_parsing``
+     - ``drop``
+     - Traps packets dropped due to an error in the UDP header parsing.
+       This packet trap could include checksum errorrs, an improper UDP
+       length detected (smaller than 8 bytes) or detection of header
+       truncation.
+   * - ``tcp_parsing``
+     - ``drop``
+     - Traps packets dropped due to an error in the TCP header parsing.
+       This could include TCP checksum errors, improper combination of SYN, FIN
+       and/or RESET etc.
+   * - ``ipsec_parsing``
+     - ``drop``
+     - Traps packets dropped due to an error in the IPSEC header parsing
+   * - ``sctp_parsing``
+     - ``drop``
+     - Traps packets dropped due to an error in the SCTP header parsing.
+       This would mean that port number 0 was used or that the header is
+       truncated.
+   * - ``dccp_parsing``
+     - ``drop``
+     - Traps packets dropped due to an error in the DCCP header parsing
+   * - ``gtp_parsing``
+     - ``drop``
+     - Traps packets dropped due to an error in the GTP header parsing
+   * - ``esp_parsing``
+     - ``drop``
+     - Traps packets dropped due to an error in the ESP header parsing
 
 Driver-specific Packet Traps
 ============================
@@ -509,6 +576,9 @@ narrow. The description of these groups must be added to the following table:
    * - ``acl_trap``
      - Contains packet traps for packets that were trapped (logged) by the
        device during ACL processing
+   * - ``parser_error_drops``
+     - Contains packet traps for packets that were marked by the device during
+       parsing as erroneous
 
 Packet Trap Policers
 ====================

Documentation/networking/devlink/ice.rst

@@ -69,6 +69,11 @@ The ``ice`` driver reports the following versions
       - The version of the DDP package that is active in the device. Note
         that both the name (as reported by ``fw.app.name``) and version are
         required to uniquely identify the package.
+    * - ``fw.app.bundle_id``
+      - 0xc0000001
+      - Unique identifier for the DDP package loaded in the device. Also
+        referred to as the DDP Track ID. Can be used to uniquely identify
+        the specific DDP package.
     * - ``fw.netlist``
       - running
       - 1.1.2000-6.7.0
@@ -81,6 +86,37 @@ The ``ice`` driver reports the following versions
       - 0xee16ced7
       - The first 4 bytes of the hash of the netlist module contents.
 
+Flash Update
+============
+
+The ``ice`` driver implements support for flash update using the
+``devlink-flash`` interface. It supports updating the device flash using a
+combined flash image that contains the ``fw.mgmt``, ``fw.undi``, and
+``fw.netlist`` components.
+
+.. list-table:: List of supported overwrite modes
+   :widths: 5 95
+
+   * - Bits
+     - Behavior
+   * - ``DEVLINK_FLASH_OVERWRITE_SETTINGS``
+     - Do not preserve settings stored in the flash components being
+       updated. This includes overwriting the port configuration that
+       determines the number of physical functions the device will
+       initialize with.
+   * - ``DEVLINK_FLASH_OVERWRITE_SETTINGS`` and ``DEVLINK_FLASH_OVERWRITE_IDENTIFIERS``
+     - Do not preserve either settings or identifiers. Overwrite everything
+       in the flash with the contents from the provided image, without
+       performing any preservation. This includes overwriting device
+       identifying fields such as the MAC address, VPD area, and device
+       serial number. It is expected that this combination be used with an
+       image customized for the specific device.
+
+The ice hardware does not support overwriting only identifiers while
+preserving settings, and thus ``DEVLINK_FLASH_OVERWRITE_IDENTIFIERS`` on its
+own will be rejected. If no overwrite mask is provided, the firmware will be
+instructed to preserve all settings and identifying fields when updating.
+
 Regions
 =======
 

Documentation/networking/devlink/index.rst

@@ -20,6 +20,7 @@ general.
    devlink-params
    devlink-region
    devlink-resource
+   devlink-reload
    devlink-trap
 
 Driver-specific documentation

Documentation/networking/ethtool-netlink.rst

@@ -68,6 +68,7 @@ the flags may not apply to requests. Recognized flags are:
   =================================  ===================================
   ``ETHTOOL_FLAG_COMPACT_BITSETS``   use compact format bitsets in reply
   ``ETHTOOL_FLAG_OMIT_REPLY``        omit optional reply (_SET and _ACT)
+  ``ETHTOOL_FLAG_STATS``             include optional device statistics
   =================================  ===================================
 
 New request flags should follow the general idea that if the flag is not set,
@@ -991,8 +992,18 @@ Kernel response contents:
   ``ETHTOOL_A_PAUSE_AUTONEG``            bool    pause autonegotiation
   ``ETHTOOL_A_PAUSE_RX``                 bool    receive pause frames
   ``ETHTOOL_A_PAUSE_TX``                 bool    transmit pause frames
+  ``ETHTOOL_A_PAUSE_STATS``              nested  pause statistics
   =====================================  ======  ==========================
 
+``ETHTOOL_A_PAUSE_STATS`` are reported if ``ETHTOOL_FLAG_STATS`` was set
+in ``ETHTOOL_A_HEADER_FLAGS``.
+It will be empty if driver did not report any statistics. Drivers fill in
+the statistics in the following structure:
+
+.. kernel-doc:: include/linux/ethtool.h
+    :identifiers: ethtool_pause_stats
+
+Each member has a corresponding attribute defined.
 
 PAUSE_SET
 ============

Documentation/networking/index.rst

@@ -93,6 +93,7 @@ Contents:
    sctp
    secid
    seg6-sysctl
+   statistics
    strparser
    switchdev
    sysfs-tagging

Documentation/networking/kapi.rst

@@ -134,6 +134,15 @@ PHY Support
 .. kernel-doc:: drivers/net/phy/phy.c
    :internal:
 
+.. kernel-doc:: drivers/net/phy/phy-core.c
+   :export:
+
+.. kernel-doc:: drivers/net/phy/phy-c45.c
+   :export:
+
+.. kernel-doc:: include/linux/phy.h
+   :internal:
+
 .. kernel-doc:: drivers/net/phy/phy_device.c
    :export:
 

Documentation/networking/l2tp.rst

@@ -4,124 +4,364 @@
 L2TP
 ====
 
-This document describes how to use the kernel's L2TP drivers to
+Layer 2 Tunneling Protocol (L2TP) allows L2 frames to be tunneled over
-provide L2TP functionality. L2TP is a protocol that tunnels one or
+an IP network.
-more sessions over an IP tunnel. It is commonly used for VPNs
-(L2TP/IPSec) and by ISPs to tunnel subscriber PPP sessions over an IP
-network infrastructure. With L2TPv3, it is also useful as a Layer-2
-tunneling infrastructure.
 
-Features
+This document covers the kernel's L2TP subsystem. It documents kernel
+APIs for application developers who want to use the L2TP subsystem and
+it provides some technical details about the internal implementation
+which may be useful to kernel developers and maintainers.
+
+Overview
 ========
 
-L2TPv2 (PPP over L2TP (UDP tunnels)).
+The kernel's L2TP subsystem implements the datapath for L2TPv2 and
-L2TPv3 ethernet pseudowires.
+L2TPv3. L2TPv2 is carried over UDP. L2TPv3 is carried over UDP or
-L2TPv3 PPP pseudowires.
+directly over IP (protocol 115).
-L2TPv3 IP encapsulation.
-Netlink sockets for L2TPv3 configuration management.
 
-History
+The L2TP RFCs define two basic kinds of L2TP packets: control packets
-=======
+(the "control plane"), and data packets (the "data plane"). The kernel
+deals only with data packets. The more complex control packets are
+handled by user space.
 
-The original pppol2tp driver was introduced in 2.6.23 and provided
+An L2TP tunnel carries one or more L2TP sessions. Each tunnel is
-L2TPv2 functionality (rfc2661). L2TPv2 is used to tunnel one or more PPP
+associated with a socket. Each session is associated with a virtual
-sessions over a UDP tunnel.
+netdevice, e.g. ``pppN``, ``l2tpethN``, through which data frames pass
+to/from L2TP. Fields in the L2TP header identify the tunnel or session
+and whether it is a control or data packet. When tunnels and sessions
+are set up using the Linux kernel API, we're just setting up the L2TP
+data path. All aspects of the control protocol are to be handled by
+user space.
 
-L2TPv3 (rfc3931) changes the protocol to allow different frame types
+This split in responsibilities leads to a natural sequence of
-to be passed over an L2TP tunnel by moving the PPP-specific parts of
+operations when establishing tunnels and sessions. The procedure looks
-the protocol out of the core L2TP packet headers. Each frame type is
+like this:
-known as a pseudowire type. Ethernet, PPP, HDLC, Frame Relay and ATM
-pseudowires for L2TP are defined in separate RFC standards. Another
-change for L2TPv3 is that it can be carried directly over IP with no
-UDP header (UDP is optional). It is also possible to create static
-unmanaged L2TPv3 tunnels manually without a control protocol
-(userspace daemon) to manage them.
 
-To support L2TPv3, the original pppol2tp driver was split up to
+    1) Create a tunnel socket. Exchange L2TP control protocol messages
-separate the L2TP and PPP functionality. Existing L2TPv2 userspace
+       with the peer over that socket in order to establish a tunnel.
-apps should be unaffected as the original pppol2tp sockets API is
-retained. L2TPv3, however, uses netlink to manage L2TPv3 tunnels and
-sessions.
 
-Design
+    2) Create a tunnel context in the kernel, using information
-======
+       obtained from the peer using the control protocol messages.
 
-The L2TP protocol separates control and data frames.  The L2TP kernel
+    3) Exchange L2TP control protocol messages with the peer over the
-drivers handle only L2TP data frames; control frames are always
+       tunnel socket in order to establish a session.
-handled by userspace. L2TP control frames carry messages between L2TP
-clients/servers and are used to setup / teardown tunnels and
-sessions. An L2TP client or server is implemented in userspace.
 
-Each L2TP tunnel is implemented using a UDP or L2TPIP socket; L2TPIP
+    4) Create a session context in the kernel using information
-provides L2TPv3 IP encapsulation (no UDP) and is implemented using a
+       obtained from the peer using the control protocol messages.
-new l2tpip socket family. The tunnel socket is typically created by
-userspace, though for unmanaged L2TPv3 tunnels, the socket can also be
-created by the kernel. Each L2TP session (pseudowire) gets a network
-interface instance. In the case of PPP, these interfaces are created
-indirectly by pppd using a pppol2tp socket. In the case of ethernet,
-the netdevice is created upon a netlink request to create an L2TPv3
-ethernet pseudowire.
 
-For PPP, the PPPoL2TP driver, net/l2tp/l2tp_ppp.c, provides a
+L2TP APIs
-mechanism by which PPP frames carried through an L2TP session are
+=========
-passed through the kernel's PPP subsystem. The standard PPP daemon,
-pppd, handles all PPP interaction with the peer. PPP network
-interfaces are created for each local PPP endpoint. The kernel's PPP
-subsystem arranges for PPP control frames to be delivered to pppd,
-while data frames are forwarded as usual.
 
-For ethernet, the L2TPETH driver, net/l2tp/l2tp_eth.c, implements a
+This section documents each userspace API of the L2TP subsystem.
-netdevice driver, managing virtual ethernet devices, one per
-pseudowire. These interfaces can be managed using standard Linux tools
-such as "ip" and "ifconfig". If only IP frames are passed over the
-tunnel, the interface can be given an IP addresses of itself and its
-peer. If non-IP frames are to be passed over the tunnel, the interface
-can be added to a bridge using brctl. All L2TP datapath protocol
-functions are handled by the L2TP core driver.
 
-Each tunnel and session within a tunnel is assigned a unique tunnel_id
+Tunnel Sockets
-and session_id. These ids are carried in the L2TP header of every
+--------------
-control and data packet. (Actually, in L2TPv3, the tunnel_id isn't
-present in data frames - it is inferred from the IP connection on
-which the packet was received.) The L2TP driver uses the ids to lookup
-internal tunnel and/or session contexts to determine how to handle the
-packet. Zero tunnel / session ids are treated specially - zero ids are
-never assigned to tunnels or sessions in the network. In the driver,
-the tunnel context keeps a reference to the tunnel UDP or L2TPIP
-socket. The session context holds data that lets the driver interface
-to the kernel's network frame type subsystems, i.e. PPP, ethernet.
 
-Userspace Programming
+L2TPv2 always uses UDP. L2TPv3 may use UDP or IP encapsulation.
-=====================
 
-For L2TPv2, there are a number of requirements on the userspace L2TP
+To create a tunnel socket for use by L2TP, the standard POSIX
-daemon in order to use the pppol2tp driver.
+socket API is used.
 
-1. Use a UDP socket per tunnel.
+For example, for a tunnel using IPv4 addresses and UDP encapsulation::
 
-2. Create a single PPPoL2TP socket per tunnel bound to a special null
+    int sockfd = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
-   session id. This is used only for communicating with the driver but
-   must remain open while the tunnel is active. Opening this tunnel
-   management socket causes the driver to mark the tunnel socket as an
-   L2TP UDP encapsulation socket and flags it for use by the
-   referenced tunnel id. This hooks up the UDP receive path via
-   udp_encap_rcv() in net/ipv4/udp.c. PPP data frames are never passed
-   in this special PPPoX socket.
 
-3. Create a PPPoL2TP socket per L2TP session. This is typically done
+Or for a tunnel using IPv6 addresses and IP encapsulation::
-   by starting pppd with the pppol2tp plugin and appropriate
+
-   arguments. A PPPoL2TP tunnel management socket (Step 2) must be
+    int sockfd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_L2TP);
-   created before the first PPPoL2TP session socket is created.
+
+UDP socket programming doesn't need to be covered here.
+
+IPPROTO_L2TP is an IP protocol type implemented by the kernel's L2TP
+subsystem. The L2TPIP socket address is defined in struct
+sockaddr_l2tpip and struct sockaddr_l2tpip6 at
+`include/uapi/linux/l2tp.h`_. The address includes the L2TP tunnel
+(connection) id. To use L2TP IP encapsulation, an L2TPv3 application
+should bind the L2TPIP socket using the locally assigned
+tunnel id. When the peer's tunnel id and IP address is known, a
+connect must be done.
+
+If the L2TP application needs to handle L2TPv3 tunnel setup requests
+from peers using L2TPIP, it must open a dedicated L2TPIP
+socket to listen for those requests and bind the socket using tunnel
+id 0 since tunnel setup requests are addressed to tunnel id 0.
+
+An L2TP tunnel and all of its sessions are automatically closed when
+its tunnel socket is closed.
+
+Netlink API
+-----------
+
+L2TP applications use netlink to manage L2TP tunnel and session
+instances in the kernel. The L2TP netlink API is defined in
+`include/uapi/linux/l2tp.h`_.
+
+L2TP uses `Generic Netlink`_ (GENL). Several commands are defined:
+Create, Delete, Modify and Get for tunnel and session
+instances, e.g. ``L2TP_CMD_TUNNEL_CREATE``. The API header lists the
+netlink attribute types that can be used with each command.
+
+Tunnel and session instances are identified by a locally unique
+32-bit id.  L2TP tunnel ids are given by ``L2TP_ATTR_CONN_ID`` and
+``L2TP_ATTR_PEER_CONN_ID`` attributes and L2TP session ids are given
+by ``L2TP_ATTR_SESSION_ID`` and ``L2TP_ATTR_PEER_SESSION_ID``
+attributes. If netlink is used to manage L2TPv2 tunnel and session
+instances, the L2TPv2 16-bit tunnel/session id is cast to a 32-bit
+value in these attributes.
+
+In the ``L2TP_CMD_TUNNEL_CREATE`` command, ``L2TP_ATTR_FD`` tells the
+kernel the tunnel socket fd being used. If not specified, the kernel
+creates a kernel socket for the tunnel, using IP parameters set in
+``L2TP_ATTR_IP[6]_SADDR``, ``L2TP_ATTR_IP[6]_DADDR``,
+``L2TP_ATTR_UDP_SPORT``, ``L2TP_ATTR_UDP_DPORT`` attributes. Kernel
+sockets are used to implement unmanaged L2TPv3 tunnels (iproute2's "ip
+l2tp" commands). If ``L2TP_ATTR_FD`` is given, it must be a socket fd
+that is already bound and connected. There is more information about
+unmanaged tunnels later in this document.
+
+``L2TP_CMD_TUNNEL_CREATE`` attributes:-
+
+================== ======== ===
+Attribute          Required Use
+================== ======== ===
+CONN_ID            Y        Sets the tunnel (connection) id.
+PEER_CONN_ID       Y        Sets the peer tunnel (connection) id.
+PROTO_VERSION      Y        Protocol version. 2 or 3.
+ENCAP_TYPE         Y        Encapsulation type: UDP or IP.
+FD                 N        Tunnel socket file descriptor.
+UDP_CSUM           N        Enable IPv4 UDP checksums. Used only if FD is
+                            not set.
+UDP_ZERO_CSUM6_TX  N        Zero IPv6 UDP checksum on transmit. Used only
+                            if FD is not set.
+UDP_ZERO_CSUM6_RX  N        Zero IPv6 UDP checksum on receive. Used only if
+                            FD is not set.
+IP_SADDR           N        IPv4 source address. Used only if FD is not
+                            set.
+IP_DADDR           N        IPv4 destination address. Used only if FD is
+                            not set.
+UDP_SPORT          N        UDP source port. Used only if FD is not set.
+UDP_DPORT          N        UDP destination port. Used only if FD is not
+                            set.
+IP6_SADDR          N        IPv6 source address. Used only if FD is not
+                            set.
+IP6_DADDR          N        IPv6 destination address. Used only if FD is
+                            not set.
+DEBUG              N        Debug flags.
+================== ======== ===
+
+``L2TP_CMD_TUNNEL_DESTROY`` attributes:-
+
+================== ======== ===
+Attribute          Required Use
+================== ======== ===
+CONN_ID            Y        Identifies the tunnel id to be destroyed.
+================== ======== ===
+
+``L2TP_CMD_TUNNEL_MODIFY`` attributes:-
+
+================== ======== ===
+Attribute          Required Use
+================== ======== ===
+CONN_ID            Y        Identifies the tunnel id to be modified.
+DEBUG              N        Debug flags.
+================== ======== ===
+
+``L2TP_CMD_TUNNEL_GET`` attributes:-
+
+================== ======== ===
+Attribute          Required Use
+================== ======== ===
+CONN_ID            N        Identifies the tunnel id to be queried.
+                            Ignored in DUMP requests.
+================== ======== ===
+
+``L2TP_CMD_SESSION_CREATE`` attributes:-
+
+================== ======== ===
+Attribute          Required Use
+================== ======== ===
+CONN_ID            Y        The parent tunnel id.
+SESSION_ID         Y        Sets the session id.
+PEER_SESSION_ID    Y        Sets the parent session id.
+PW_TYPE            Y        Sets the pseudowire type.
+DEBUG              N        Debug flags.
+RECV_SEQ           N        Enable rx data sequence numbers.
+SEND_SEQ           N        Enable tx data sequence numbers.
+LNS_MODE           N        Enable LNS mode (auto-enable data sequence
+                            numbers).
+RECV_TIMEOUT       N        Timeout to wait when reordering received
+                            packets.
+L2SPEC_TYPE        N        Sets layer2-specific-sublayer type (L2TPv3
+                            only).
+COOKIE             N        Sets optional cookie (L2TPv3 only).
+PEER_COOKIE        N        Sets optional peer cookie (L2TPv3 only).
+IFNAME             N        Sets interface name (L2TPv3 only).
+================== ======== ===
+
+For Ethernet session types, this will create an l2tpeth virtual
+interface which can then be configured as required. For PPP session
+types, a PPPoL2TP socket must also be opened and connected, mapping it
+onto the new session. This is covered in "PPPoL2TP Sockets" later.
+
+``L2TP_CMD_SESSION_DESTROY`` attributes:-
+
+================== ======== ===
+Attribute          Required Use
+================== ======== ===
+CONN_ID            Y        Identifies the parent tunnel id of the session
+                            to be destroyed.
+SESSION_ID         Y        Identifies the session id to be destroyed.
+IFNAME             N        Identifies the session by interface name. If
+                            set, this overrides any CONN_ID and SESSION_ID
+                            attributes. Currently supported for L2TPv3
+                            Ethernet sessions only.
+================== ======== ===
+
+``L2TP_CMD_SESSION_MODIFY`` attributes:-
+
+================== ======== ===
+Attribute          Required Use
+================== ======== ===
+CONN_ID            Y        Identifies the parent tunnel id of the session
+                            to be modified.
+SESSION_ID         Y        Identifies the session id to be modified.
+IFNAME             N        Identifies the session by interface name. If
+                            set, this overrides any CONN_ID and SESSION_ID
+                            attributes. Currently supported for L2TPv3
+                            Ethernet sessions only.
+DEBUG              N        Debug flags.
+RECV_SEQ           N        Enable rx data sequence numbers.
+SEND_SEQ           N        Enable tx data sequence numbers.
+LNS_MODE           N        Enable LNS mode (auto-enable data sequence
+                            numbers).
+RECV_TIMEOUT       N        Timeout to wait when reordering received
+                            packets.
+================== ======== ===
+
+``L2TP_CMD_SESSION_GET`` attributes:-
+
+================== ======== ===
+Attribute          Required Use
+================== ======== ===
+CONN_ID            N        Identifies the tunnel id to be queried.
+                            Ignored for DUMP requests.
+SESSION_ID         N        Identifies the session id to be queried.
+                            Ignored for DUMP requests.
+IFNAME             N        Identifies the session by interface name.
+                            If set, this overrides any CONN_ID and
+                            SESSION_ID attributes. Ignored for DUMP
+                            requests. Currently supported for L2TPv3
+                            Ethernet sessions only.
+================== ======== ===
+
+Application developers should refer to `include/uapi/linux/l2tp.h`_ for
+netlink command and attribute definitions.
+
+Sample userspace code using libmnl_:
+
+  - Open L2TP netlink socket::
+
+        struct nl_sock *nl_sock;
+        int l2tp_nl_family_id;
+
+        nl_sock = nl_socket_alloc();
+        genl_connect(nl_sock);
+        genl_id = genl_ctrl_resolve(nl_sock, L2TP_GENL_NAME);
+
+  - Create a tunnel::
+
+        struct nlmsghdr *nlh;
+        struct genlmsghdr *gnlh;
+
+        nlh = mnl_nlmsg_put_header(buf);
+        nlh->nlmsg_type = genl_id; /* assigned to genl socket */
+        nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK;
+        nlh->nlmsg_seq = seq;
+
+        gnlh = mnl_nlmsg_put_extra_header(nlh, sizeof(*gnlh));
+        gnlh->cmd = L2TP_CMD_TUNNEL_CREATE;
+        gnlh->version = L2TP_GENL_VERSION;
+        gnlh->reserved = 0;
+
+        mnl_attr_put_u32(nlh, L2TP_ATTR_FD, tunl_sock_fd);
+        mnl_attr_put_u32(nlh, L2TP_ATTR_CONN_ID, tid);
+        mnl_attr_put_u32(nlh, L2TP_ATTR_PEER_CONN_ID, peer_tid);
+        mnl_attr_put_u8(nlh, L2TP_ATTR_PROTO_VERSION, protocol_version);
+        mnl_attr_put_u16(nlh, L2TP_ATTR_ENCAP_TYPE, encap);
+
+  - Create a session::
+
+        struct nlmsghdr *nlh;
+        struct genlmsghdr *gnlh;
+
+        nlh = mnl_nlmsg_put_header(buf);
+        nlh->nlmsg_type = genl_id; /* assigned to genl socket */
+        nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK;
+        nlh->nlmsg_seq = seq;
+
+        gnlh = mnl_nlmsg_put_extra_header(nlh, sizeof(*gnlh));
+        gnlh->cmd = L2TP_CMD_SESSION_CREATE;
+        gnlh->version = L2TP_GENL_VERSION;
+        gnlh->reserved = 0;
+
+        mnl_attr_put_u32(nlh, L2TP_ATTR_CONN_ID, tid);
+        mnl_attr_put_u32(nlh, L2TP_ATTR_PEER_CONN_ID, peer_tid);
+        mnl_attr_put_u32(nlh, L2TP_ATTR_SESSION_ID, sid);
+        mnl_attr_put_u32(nlh, L2TP_ATTR_PEER_SESSION_ID, peer_sid);
+        mnl_attr_put_u16(nlh, L2TP_ATTR_PW_TYPE, pwtype);
+        /* there are other session options which can be set using netlink
+         * attributes during session creation -- see l2tp.h
+         */
+
+  - Delete a session::
+
+        struct nlmsghdr *nlh;
+        struct genlmsghdr *gnlh;
+
+        nlh = mnl_nlmsg_put_header(buf);
+        nlh->nlmsg_type = genl_id; /* assigned to genl socket */
+        nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK;
+        nlh->nlmsg_seq = seq;
+
+        gnlh = mnl_nlmsg_put_extra_header(nlh, sizeof(*gnlh));
+        gnlh->cmd = L2TP_CMD_SESSION_DELETE;
+        gnlh->version = L2TP_GENL_VERSION;
+        gnlh->reserved = 0;
+
+        mnl_attr_put_u32(nlh, L2TP_ATTR_CONN_ID, tid);
+        mnl_attr_put_u32(nlh, L2TP_ATTR_SESSION_ID, sid);
+
+  - Delete a tunnel and all of its sessions (if any)::
+
+        struct nlmsghdr *nlh;
+        struct genlmsghdr *gnlh;
+
+        nlh = mnl_nlmsg_put_header(buf);
+        nlh->nlmsg_type = genl_id; /* assigned to genl socket */
+        nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK;
+        nlh->nlmsg_seq = seq;
+
+        gnlh = mnl_nlmsg_put_extra_header(nlh, sizeof(*gnlh));
+        gnlh->cmd = L2TP_CMD_TUNNEL_DELETE;
+        gnlh->version = L2TP_GENL_VERSION;
+        gnlh->reserved = 0;
+
+        mnl_attr_put_u32(nlh, L2TP_ATTR_CONN_ID, tid);
+
+PPPoL2TP Session Socket API
+---------------------------
+
+For PPP session types, a PPPoL2TP socket must be opened and connected
+to the L2TP session.
 
 When creating PPPoL2TP sockets, the application provides information
-to the driver about the socket in a socket connect() call. Source and
+to the kernel about the tunnel and session in a socket connect()
-destination tunnel and session ids are provided, as well as the file
+call. Source and destination tunnel and session ids are provided, as
-descriptor of a UDP socket. See struct pppol2tp_addr in
+well as the file descriptor of a UDP or L2TPIP socket. See struct
-include/linux/if_pppol2tp.h. Note that zero tunnel / session ids are
+pppol2tp_addr in `include/linux/if_pppol2tp.h`_. For historical reasons,
-treated specially. When creating the per-tunnel PPPoL2TP management
+there are unfortunately slightly different address structures for
-socket in Step 2 above, zero source and destination session ids are
+L2TPv2/L2TPv3 IPv4/IPv6 tunnels and userspace must use the appropriate
-specified, which tells the driver to prepare the supplied UDP file
+structure that matches the tunnel socket type.
-descriptor for use as an L2TP tunnel socket.
 
 Userspace may control behavior of the tunnel or session using
 setsockopt and ioctl on the PPPoX socket. The following socket
@@ -130,229 +370,308 @@ options are supported:-
 =========   ===========================================================
 DEBUG       bitmask of debug message categories. See below.
 SENDSEQ     - 0 => don't send packets with sequence numbers
-	    - 1 => send packets with sequence numbers
+            - 1 => send packets with sequence numbers
 RECVSEQ     - 0 => receive packet sequence numbers are optional
-	    - 1 => drop receive packets without sequence numbers
+            - 1 => drop receive packets without sequence numbers
 LNSMODE     - 0 => act as LAC.
-	    - 1 => act as LNS.
+            - 1 => act as LNS.
 REORDERTO   reorder timeout (in millisecs). If 0, don't try to reorder.
 =========   ===========================================================
 
-Only the DEBUG option is supported by the special tunnel management
-PPPoX socket.
-
 In addition to the standard PPP ioctls, a PPPIOCGL2TPSTATS is provided
 to retrieve tunnel and session statistics from the kernel using the
 PPPoX socket of the appropriate tunnel or session.
 
-For L2TPv3, userspace must use the netlink API defined in
+Sample userspace code:
-include/linux/l2tp.h to manage tunnel and session contexts. The
-general procedure to create a new L2TP tunnel with one session is:-
 
-1. Open a GENL socket using L2TP_GENL_NAME for configuring the kernel
+  - Create session PPPoX data socket::
-   using netlink.
 
-2. Create a UDP or L2TPIP socket for the tunnel.
+        struct sockaddr_pppol2tp sax;
+        int fd;
 
-3. Create a new L2TP tunnel using a L2TP_CMD_TUNNEL_CREATE
+        /* Note, the tunnel socket must be bound already, else it
-   request. Set attributes according to desired tunnel parameters,
+         * will not be ready
-   referencing the UDP or L2TPIP socket created in the previous step.
+         */
+        sax.sa_family = AF_PPPOX;
+        sax.sa_protocol = PX_PROTO_OL2TP;
+        sax.pppol2tp.fd = tunnel_fd;
+        sax.pppol2tp.addr.sin_addr.s_addr = addr->sin_addr.s_addr;
+        sax.pppol2tp.addr.sin_port = addr->sin_port;
+        sax.pppol2tp.addr.sin_family = AF_INET;
+        sax.pppol2tp.s_tunnel  = tunnel_id;
+        sax.pppol2tp.s_session = session_id;
+        sax.pppol2tp.d_tunnel  = peer_tunnel_id;
+        sax.pppol2tp.d_session = peer_session_id;
 
-4. Create a new L2TP session in the tunnel using a
+        /* session_fd is the fd of the session's PPPoL2TP socket.
-   L2TP_CMD_SESSION_CREATE request.
+         * tunnel_fd is the fd of the tunnel UDP / L2TPIP socket.
+         */
+        fd = connect(session_fd, (struct sockaddr *)&sax, sizeof(sax));
+        if (fd < 0 ) {
+                return -errno;
+        }
+        return 0;
 
-The tunnel and all of its sessions are closed when the tunnel socket
+Old L2TPv2-only API
-is closed. The netlink API may also be used to delete sessions and
+-------------------
-tunnels. Configuration and status info may be set or read using netlink.
 
-The L2TP driver also supports static (unmanaged) L2TPv3 tunnels. These
+When L2TP was first added to the Linux kernel in 2.6.23, it
-are where there is no L2TP control message exchange with the peer to
+implemented only L2TPv2 and did not include a netlink API. Instead,
-setup the tunnel; the tunnel is configured manually at each end of the
+tunnel and session instances in the kernel were managed directly using
-tunnel. There is no need for an L2TP userspace application in this
+only PPPoL2TP sockets. The PPPoL2TP socket is used as described in
-case -- the tunnel socket is created by the kernel and configured
+section "PPPoL2TP Session Socket API" but tunnel and session instances
-using parameters sent in the L2TP_CMD_TUNNEL_CREATE netlink
+are automatically created on a connect() of the socket instead of
-request. The "ip" utility of iproute2 has commands for managing static
+being created by a separate netlink request:
-L2TPv3 tunnels; do "ip l2tp help" for more information.
+
+    - Tunnels are managed using a tunnel management socket which is a
+      dedicated PPPoL2TP socket, connected to (invalid) session
+      id 0. The L2TP tunnel instance is created when the PPPoL2TP
+      tunnel management socket is connected and is destroyed when the
+      socket is closed.
+
+    - Session instances are created in the kernel when a PPPoL2TP
+      socket is connected to a non-zero session id. Session parameters
+      are set using setsockopt. The L2TP session instance is destroyed
+      when the socket is closed.
+
+This API is still supported but its use is discouraged. Instead, new
+L2TPv2 applications should use netlink to first create the tunnel and
+session, then create a PPPoL2TP socket for the session.
+
+Unmanaged L2TPv3 tunnels
+------------------------
+
+The kernel L2TP subsystem also supports static (unmanaged) L2TPv3
+tunnels. Unmanaged tunnels have no userspace tunnel socket, and
+exchange no control messages with the peer to set up the tunnel; the
+tunnel is configured manually at each end of the tunnel. All
+configuration is done using netlink. There is no need for an L2TP
+userspace application in this case -- the tunnel socket is created by
+the kernel and configured using parameters sent in the
+``L2TP_CMD_TUNNEL_CREATE`` netlink request. The ``ip`` utility of
+``iproute2`` has commands for managing static L2TPv3 tunnels; do ``ip
+l2tp help`` for more information.
 
 Debugging
-=========
+---------
 
-The driver supports a flexible debug scheme where kernel trace
+The L2TP subsystem offers a range of debugging interfaces through the
-messages may be optionally enabled per tunnel and per session. Care is
+debugfs filesystem.
-needed when debugging a live system since the messages are not
-rate-limited and a busy system could be swamped. Userspace uses
-setsockopt on the PPPoX socket to set a debug mask.
 
-The following debug mask bits are available:
+To access these interfaces, the debugfs filesystem must first be mounted::
 
-================  ==============================
+    # mount -t debugfs debugfs /debug
-L2TP_MSG_DEBUG    verbose debug (if compiled in)
-L2TP_MSG_CONTROL  userspace - kernel interface
-L2TP_MSG_SEQ      sequence numbers handling
-L2TP_MSG_DATA     data packets
-================  ==============================
 
-If enabled, files under a l2tp debugfs directory can be used to dump
+Files under the l2tp directory can then be accessed, providing a summary
-kernel state about L2TP tunnels and sessions. To access it, the
+of the current population of tunnel and session contexts existing in the
-debugfs filesystem must first be mounted::
+kernel::
 
-	# mount -t debugfs debugfs /debug
+    # cat /debug/l2tp/tunnels
-
-Files under the l2tp directory can then be accessed::
-
-	# cat /debug/l2tp/tunnels
 
 The debugfs files should not be used by applications to obtain L2TP
 state information because the file format is subject to change. It is
 implemented to provide extra debug information to help diagnose
-problems.) Users should use the netlink API.
+problems. Applications should instead use the netlink API.
 
-/proc/net/pppol2tp is also provided for backwards compatibility with
+In addition the L2TP subsystem implements tracepoints using the standard
-the original pppol2tp driver. It lists information about L2TPv2
+kernel event tracing API.  The available L2TP events can be reviewed as
+follows::
+
+    # find /debug/tracing/events/l2tp
+
+Finally, /proc/net/pppol2tp is also provided for backwards compatibility
+with the original pppol2tp code. It lists information about L2TPv2
 tunnels and sessions only. Its use is discouraged.
 
-Unmanaged L2TPv3 Tunnels
-========================
-
-Some commercial L2TP products support unmanaged L2TPv3 ethernet
-tunnels, where there is no L2TP control protocol; tunnels are
-configured at each side manually. New commands are available in
-iproute2's ip utility to support this.
-
-To create an L2TPv3 ethernet pseudowire between local host 192.168.1.1
-and peer 192.168.1.2, using IP addresses 10.5.1.1 and 10.5.1.2 for the
-tunnel endpoints::
-
-	# ip l2tp add tunnel tunnel_id 1 peer_tunnel_id 1 udp_sport 5000 \
-	  udp_dport 5000 encap udp local 192.168.1.1 remote 192.168.1.2
-	# ip l2tp add session tunnel_id 1 session_id 1 peer_session_id 1
-	# ip -s -d show dev l2tpeth0
-	# ip addr add 10.5.1.2/32 peer 10.5.1.1/32 dev l2tpeth0
-	# ip li set dev l2tpeth0 up
-
-Choose IP addresses to be the address of a local IP interface and that
-of the remote system. The IP addresses of the l2tpeth0 interface can be
-anything suitable.
-
-Repeat the above at the peer, with ports, tunnel/session ids and IP
-addresses reversed.  The tunnel and session IDs can be any non-zero
-32-bit number, but the values must be reversed at the peer.
-
-========================       ===================
-Host 1                         Host2
-========================       ===================
-udp_sport=5000                 udp_sport=5001
-udp_dport=5001                 udp_dport=5000
-tunnel_id=42                   tunnel_id=45
-peer_tunnel_id=45              peer_tunnel_id=42
-session_id=128                 session_id=5196755
-peer_session_id=5196755        peer_session_id=128
-========================       ===================
-
-When done at both ends of the tunnel, it should be possible to send
-data over the network. e.g.::
-
-	# ping 10.5.1.1
-
-
-Sample Userspace Code
-=====================
-
-1. Create tunnel management PPPoX socket::
-
-	kernel_fd = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP);
-	if (kernel_fd >= 0) {
-		struct sockaddr_pppol2tp sax;
-		struct sockaddr_in const *peer_addr;
-
-		peer_addr = l2tp_tunnel_get_peer_addr(tunnel);
-		memset(&sax, 0, sizeof(sax));
-		sax.sa_family = AF_PPPOX;
-		sax.sa_protocol = PX_PROTO_OL2TP;
-		sax.pppol2tp.fd = udp_fd;       /* fd of tunnel UDP socket */
-		sax.pppol2tp.addr.sin_addr.s_addr = peer_addr->sin_addr.s_addr;
-		sax.pppol2tp.addr.sin_port = peer_addr->sin_port;
-		sax.pppol2tp.addr.sin_family = AF_INET;
-		sax.pppol2tp.s_tunnel = tunnel_id;
-		sax.pppol2tp.s_session = 0;     /* special case: mgmt socket */
-		sax.pppol2tp.d_tunnel = 0;
-		sax.pppol2tp.d_session = 0;     /* special case: mgmt socket */
-
-		if(connect(kernel_fd, (struct sockaddr *)&sax, sizeof(sax) ) < 0 ) {
-			perror("connect failed");
-			result = -errno;
-			goto err;
-		}
-	}
-
-2. Create session PPPoX data socket::
-
-	struct sockaddr_pppol2tp sax;
-	int fd;
-
-	/* Note, the target socket must be bound already, else it will not be ready */
-	sax.sa_family = AF_PPPOX;
-	sax.sa_protocol = PX_PROTO_OL2TP;
-	sax.pppol2tp.fd = tunnel_fd;
-	sax.pppol2tp.addr.sin_addr.s_addr = addr->sin_addr.s_addr;
-	sax.pppol2tp.addr.sin_port = addr->sin_port;
-	sax.pppol2tp.addr.sin_family = AF_INET;
-	sax.pppol2tp.s_tunnel  = tunnel_id;
-	sax.pppol2tp.s_session = session_id;
-	sax.pppol2tp.d_tunnel  = peer_tunnel_id;
-	sax.pppol2tp.d_session = peer_session_id;
-
-	/* session_fd is the fd of the session's PPPoL2TP socket.
-	 * tunnel_fd is the fd of the tunnel UDP socket.
-	 */
-	fd = connect(session_fd, (struct sockaddr *)&sax, sizeof(sax));
-	if (fd < 0 )    {
-		return -errno;
-	}
-	return 0;
-
 Internal Implementation
 =======================
 
-The driver keeps a struct l2tp_tunnel context per L2TP tunnel and a
+This section is for kernel developers and maintainers.
-struct l2tp_session context for each session. The l2tp_tunnel is
-always associated with a UDP or L2TP/IP socket and keeps a list of
-sessions in the tunnel. The l2tp_session context keeps kernel state
-about the session. It has private data which is used for data specific
-to the session type. With L2TPv2, the session always carried PPP
-traffic. With L2TPv3, the session can also carry ethernet frames
-(ethernet pseudowire) or other data types such as ATM, HDLC or Frame
-Relay.
 
-When a tunnel is first opened, the reference count on the socket is
+Sockets
-increased using sock_hold(). This ensures that the kernel socket
+-------
-cannot be removed while L2TP's data structures reference it.
 
-Some L2TP sessions also have a socket (PPP pseudowires) while others
+UDP sockets are implemented by the networking core. When an L2TP
-do not (ethernet pseudowires). We can't use the socket reference count
+tunnel is created using a UDP socket, the socket is set up as an
-as the reference count for session contexts. The L2TP implementation
+encapsulated UDP socket by setting encap_rcv and encap_destroy
-therefore has its own internal reference counts on the session
+callbacks on the UDP socket. l2tp_udp_encap_recv is called when
-contexts.
+packets are received on the socket. l2tp_udp_encap_destroy is called
+when userspace closes the socket.
 
-To Do
+L2TPIP sockets are implemented in `net/l2tp/l2tp_ip.c`_ and
-=====
+`net/l2tp/l2tp_ip6.c`_.
 
-Add L2TP tunnel switching support. This would route tunneled traffic
+Tunnels
-from one L2TP tunnel into another. Specified in
+-------
-http://tools.ietf.org/html/draft-ietf-l2tpext-tunnel-switching-08
 
-Add L2TPv3 VLAN pseudowire support.
+The kernel keeps a struct l2tp_tunnel context per L2TP tunnel. The
+l2tp_tunnel is always associated with a UDP or L2TP/IP socket and
+keeps a list of sessions in the tunnel. When a tunnel is first
+registered with L2TP core, the reference count on the socket is
+increased. This ensures that the socket cannot be removed while L2TP's
+data structures reference it.
 
-Add L2TPv3 IP pseudowire support.
+Tunnels are identified by a unique tunnel id. The id is 16-bit for
+L2TPv2 and 32-bit for L2TPv3. Internally, the id is stored as a 32-bit
+value.
 
-Add L2TPv3 ATM pseudowire support.
+Tunnels are kept in a per-net list, indexed by tunnel id. The tunnel
+id namespace is shared by L2TPv2 and L2TPv3. The tunnel context can be
+derived from the socket's sk_user_data.
+
+Handling tunnel socket close is perhaps the most tricky part of the
+L2TP implementation. If userspace closes a tunnel socket, the L2TP
+tunnel and all of its sessions must be closed and destroyed. Since the
+tunnel context holds a ref on the tunnel socket, the socket's
+sk_destruct won't be called until the tunnel sock_put's its
+socket. For UDP sockets, when userspace closes the tunnel socket, the
+socket's encap_destroy handler is invoked, which L2TP uses to initiate
+its tunnel close actions. For L2TPIP sockets, the socket's close
+handler initiates the same tunnel close actions. All sessions are
+first closed. Each session drops its tunnel ref. When the tunnel ref
+reaches zero, the tunnel puts its socket ref. When the socket is
+eventually destroyed, it's sk_destruct finally frees the L2TP tunnel
+context.
+
+Sessions
+--------
+
+The kernel keeps a struct l2tp_session context for each session.  Each
+session has private data which is used for data specific to the
+session type. With L2TPv2, the session always carries PPP
+traffic. With L2TPv3, the session can carry Ethernet frames (Ethernet
+pseudowire) or other data types such as PPP, ATM, HDLC or Frame
+Relay. Linux currently implements only Ethernet and PPP session types.
+
+Some L2TP session types also have a socket (PPP pseudowires) while
+others do not (Ethernet pseudowires). We can't therefore use the
+socket reference count as the reference count for session
+contexts. The L2TP implementation therefore has its own internal
+reference counts on the session contexts.
+
+Like tunnels, L2TP sessions are identified by a unique
+session id. Just as with tunnel ids, the session id is 16-bit for
+L2TPv2 and 32-bit for L2TPv3. Internally, the id is stored as a 32-bit
+value.
+
+Sessions hold a ref on their parent tunnel to ensure that the tunnel
+stays extant while one or more sessions references it.
+
+Sessions are kept in a per-tunnel list, indexed by session id. L2TPv3
+sessions are also kept in a per-net list indexed by session id,
+because L2TPv3 session ids are unique across all tunnels and L2TPv3
+data packets do not contain a tunnel id in the header. This list is
+therefore needed to find the session context associated with a
+received data packet when the tunnel context cannot be derived from
+the tunnel socket.
+
+Although the L2TPv3 RFC specifies that L2TPv3 session ids are not
+scoped by the tunnel, the kernel does not police this for L2TPv3 UDP
+tunnels and does not add sessions of L2TPv3 UDP tunnels into the
+per-net session list. In the UDP receive code, we must trust that the
+tunnel can be identified using the tunnel socket's sk_user_data and
+lookup the session in the tunnel's session list instead of the per-net
+session list.
+
+PPP
+---
+
+`net/l2tp/l2tp_ppp.c`_ implements the PPPoL2TP socket family. Each PPP
+session has a PPPoL2TP socket.
+
+The PPPoL2TP socket's sk_user_data references the l2tp_session.
+
+Userspace sends and receives PPP packets over L2TP using a PPPoL2TP
+socket. Only PPP control frames pass over this socket: PPP data
+packets are handled entirely by the kernel, passing between the L2TP
+session and its associated ``pppN`` netdev through the PPP channel
+interface of the kernel PPP subsystem.
+
+The L2TP PPP implementation handles the closing of a PPPoL2TP socket
+by closing its corresponding L2TP session. This is complicated because
+it must consider racing with netlink session create/destroy requests
+and pppol2tp_connect trying to reconnect with a session that is in the
+process of being closed. Unlike tunnels, PPP sessions do not hold a
+ref on their associated socket, so code must be careful to sock_hold
+the socket where necessary. For all the details, see commit
+3d609342cc04129ff7568e19316ce3d7451a27e8.
+
+Ethernet
+--------
+
+`net/l2tp/l2tp_eth.c`_ implements L2TPv3 Ethernet pseudowires. It
+manages a netdev for each session.
+
+L2TP Ethernet sessions are created and destroyed by netlink request,
+or are destroyed when the tunnel is destroyed. Unlike PPP sessions,
+Ethernet sessions do not have an associated socket.
 
 Miscellaneous
 =============
 
-The L2TP drivers were developed as part of the OpenL2TP project by
+RFCs
-Katalix Systems Ltd. OpenL2TP is a full-featured L2TP client / server,
+----
-designed from the ground up to have the L2TP datapath in the
+
-kernel. The project also implemented the pppol2tp plugin for pppd
+The kernel code implements the datapath features specified in the
-which allows pppd to use the kernel driver. Details can be found at
+following RFCs:
-http://www.openl2tp.org.
+
+======= =============== ===================================
+RFC2661 L2TPv2          https://tools.ietf.org/html/rfc2661
+RFC3931 L2TPv3          https://tools.ietf.org/html/rfc3931
+RFC4719 L2TPv3 Ethernet https://tools.ietf.org/html/rfc4719
+======= =============== ===================================
+
+Implementations
+---------------
+
+A number of open source applications use the L2TP kernel subsystem:
+
+============ ==============================================
+iproute2     https://github.com/shemminger/iproute2
+go-l2tp      https://github.com/katalix/go-l2tp
+tunneldigger https://github.com/wlanslovenija/tunneldigger
+xl2tpd       https://github.com/xelerance/xl2tpd
+============ ==============================================
+
+Limitations
+-----------
+
+The current implementation has a number of limitations:
+
+  1) Multiple UDP sockets with the same 5-tuple address cannot be
+     used. The kernel's tunnel context is identified using private
+     data associated with the socket so it is important that each
+     socket is uniquely identified by its address.
+
+  2) Interfacing with openvswitch is not yet implemented. It may be
+     useful to map OVS Ethernet and VLAN ports into L2TPv3 tunnels.
+
+  3) VLAN pseudowires are implemented using an ``l2tpethN`` interface
+     configured with a VLAN sub-interface. Since L2TPv3 VLAN
+     pseudowires carry one and only one VLAN, it may be better to use
+     a single netdevice rather than an ``l2tpethN`` and ``l2tpethN``:M
+     pair per VLAN session. The netlink attribute
+     ``L2TP_ATTR_VLAN_ID`` was added for this, but it was never
+     implemented.
+
+Testing
+-------
+
+Unmanaged L2TPv3 Ethernet features are tested by the kernel's built-in
+selftests. See `tools/testing/selftests/net/l2tp.sh`_.
+
+Another test suite, l2tp-ktest_, covers all
+of the L2TP APIs and tunnel/session types. This may be integrated into
+the kernel's built-in L2TP selftests in the future.
+
+.. Links
+.. _Generic Netlink: generic_netlink.html
+.. _libmnl: https://www.netfilter.org/projects/libmnl
+.. _include/uapi/linux/l2tp.h: ../../../include/uapi/linux/l2tp.h
+.. _include/linux/if_pppol2tp.h: ../../../include/linux/if_pppol2tp.h
+.. _net/l2tp/l2tp_ip.c: ../../../net/l2tp/l2tp_ip.c
+.. _net/l2tp/l2tp_ip6.c: ../../../net/l2tp/l2tp_ip6.c
+.. _net/l2tp/l2tp_ppp.c: ../../../net/l2tp/l2tp_ppp.c
+.. _net/l2tp/l2tp_eth.c: ../../../net/l2tp/l2tp_eth.c
+.. _tools/testing/selftests/net/l2tp.sh: ../../../tools/testing/selftests/net/l2tp.sh
+.. _l2tp-ktest: https://github.com/katalix/l2tp-ktest

Documentation/networking/scaling.rst

@@ -465,9 +465,9 @@ XPS Configuration
 -----------------
 
 XPS is only available if the kconfig symbol CONFIG_XPS is enabled (on by
-default for SMP). The functionality remains disabled until explicitly
+default for SMP). If compiled in, it is driver dependent whether, and
-configured. To enable XPS, the bitmap of CPUs/receive-queues that may
+how, XPS is configured at device init. The mapping of CPUs/receive-queues
-use a transmit queue is configured using the sysfs file entry:
+to transmit queue can be inspected and configured using sysfs:
 
 For selection based on CPUs map::
 

Documentation/networking/statistics.rst

@@ -0,0 +1,179 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================
+Interface statistics
+====================
+
+Overview
+========
+
+This document is a guide to Linux network interface statistics.
+
+There are three main sources of interface statistics in Linux:
+
+ - standard interface statistics based on
+   :c:type:`struct rtnl_link_stats64 <rtnl_link_stats64>`;
+ - protocol-specific statistics; and
+ - driver-defined statistics available via ethtool.
+
+Standard interface statistics
+-----------------------------
+
+There are multiple interfaces to reach the standard statistics.
+Most commonly used is the `ip` command from `iproute2`::
+
+  $ ip -s -s link show dev ens4u1u1
+  6: ens4u1u1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
+    link/ether 48:2a:e3:4c:b1:d1 brd ff:ff:ff:ff:ff:ff
+    RX: bytes  packets  errors  dropped overrun mcast
+    74327665117 69016965 0       0       0       0
+    RX errors: length   crc     frame   fifo    missed
+               0        0       0       0       0
+    TX: bytes  packets  errors  dropped carrier collsns
+    21405556176 44608960 0       0       0       0
+    TX errors: aborted  fifo   window heartbeat transns
+               0        0       0       0       128
+    altname enp58s0u1u1
+
+Note that `-s` has been specified twice to see all members of
+:c:type:`struct rtnl_link_stats64 <rtnl_link_stats64>`.
+If `-s` is specified once the detailed errors won't be shown.
+
+`ip` supports JSON formatting via the `-j` option.
+
+Protocol-specific statistics
+----------------------------
+
+Some of the interfaces used for configuring devices are also able
+to report related statistics. For example ethtool interface used
+to configure pause frames can report corresponding hardware counters::
+
+  $ ethtool --include-statistics -a eth0
+  Pause parameters for eth0:
+  Autonegotiate:	on
+  RX:			on
+  TX:			on
+  Statistics:
+    tx_pause_frames: 1
+    rx_pause_frames: 1
+
+Driver-defined statistics
+-------------------------
+
+Driver-defined ethtool statistics can be dumped using `ethtool -S $ifc`, e.g.::
+
+  $ ethtool -S ens4u1u1
+  NIC statistics:
+     tx_single_collisions: 0
+     tx_multi_collisions: 0
+
+uAPIs
+=====
+
+procfs
+------
+
+The historical `/proc/net/dev` text interface gives access to the list
+of interfaces as well as their statistics.
+
+Note that even though this interface is using
+:c:type:`struct rtnl_link_stats64 <rtnl_link_stats64>`
+internally it combines some of the fields.
+
+sysfs
+-----
+
+Each device directory in sysfs contains a `statistics` directory (e.g.
+`/sys/class/net/lo/statistics/`) with files corresponding to
+members of :c:type:`struct rtnl_link_stats64 <rtnl_link_stats64>`.
+
+This simple interface is convenient especially in constrained/embedded
+environments without access to tools. However, it's inefficient when
+reading multiple stats as it internally performs a full dump of
+:c:type:`struct rtnl_link_stats64 <rtnl_link_stats64>`
+and reports only the stat corresponding to the accessed file.
+
+Sysfs files are documented in
+`Documentation/ABI/testing/sysfs-class-net-statistics`.
+
+
+netlink
+-------
+
+`rtnetlink` (`NETLINK_ROUTE`) is the preferred method of accessing
+:c:type:`struct rtnl_link_stats64 <rtnl_link_stats64>` stats.
+
+Statistics are reported both in the responses to link information
+requests (`RTM_GETLINK`) and statistic requests (`RTM_GETSTATS`,
+when `IFLA_STATS_LINK_64` bit is set in the `.filter_mask` of the request).
+
+ethtool
+-------
+
+Ethtool IOCTL interface allows drivers to report implementation
+specific statistics. Historically it has also been used to report
+statistics for which other APIs did not exist, like per-device-queue
+statistics, or standard-based statistics (e.g. RFC 2863).
+
+Statistics and their string identifiers are retrieved separately.
+Identifiers via `ETHTOOL_GSTRINGS` with `string_set` set to `ETH_SS_STATS`,
+and values via `ETHTOOL_GSTATS`. User space should use `ETHTOOL_GDRVINFO`
+to retrieve the number of statistics (`.n_stats`).
+
+ethtool-netlink
+---------------
+
+Ethtool netlink is a replacement for the older IOCTL interface.
+
+Protocol-related statistics can be requested in get commands by setting
+the `ETHTOOL_FLAG_STATS` flag in `ETHTOOL_A_HEADER_FLAGS`. Currently
+statistics are supported in the following commands:
+
+  - `ETHTOOL_MSG_PAUSE_GET`
+
+debugfs
+-------
+
+Some drivers expose extra statistics via `debugfs`.
+
+struct rtnl_link_stats64
+========================
+
+.. kernel-doc:: include/uapi/linux/if_link.h
+    :identifiers: rtnl_link_stats64
+
+Notes for driver authors
+========================
+
+Drivers should report all statistics which have a matching member in
+:c:type:`struct rtnl_link_stats64 <rtnl_link_stats64>` exclusively
+via `.ndo_get_stats64`. Reporting such standard stats via ethtool
+or debugfs will not be accepted.
+
+Drivers must ensure best possible compliance with
+:c:type:`struct rtnl_link_stats64 <rtnl_link_stats64>`.
+Please note for example that detailed error statistics must be
+added into the general `rx_error` / `tx_error` counters.
+
+The `.ndo_get_stats64` callback can not sleep because of accesses
+via `/proc/net/dev`. If driver may sleep when retrieving the statistics
+from the device it should do so periodically asynchronously and only return
+a recent copy from `.ndo_get_stats64`. Ethtool interrupt coalescing interface
+allows setting the frequency of refreshing statistics, if needed.
+
+Retrieving ethtool statistics is a multi-syscall process, drivers are advised
+to keep the number of statistics constant to avoid race conditions with
+user space trying to read them.
+
+Statistics must persist across routine operations like bringing the interface
+down and up.
+
+Kernel-internal data structures
+-------------------------------
+
+The following structures are internal to the kernel, their members are
+translated to netlink attributes when dumped. Drivers must not overwrite
+the statistics they don't report with 0.
+
+.. kernel-doc:: include/linux/ethtool.h
+    :identifiers: ethtool_pause_stats

Documentation/networking/vxlan.rst

@@ -58,3 +58,31 @@ forwarding table using the new bridge command.
 3. Show forwarding table::
 
     # bridge fdb show dev vxlan0
+
+The following NIC features may indicate support for UDP tunnel-related
+offloads (most commonly VXLAN features, but support for a particular
+encapsulation protocol is NIC specific):
+
+ - `tx-udp_tnl-segmentation`
+ - `tx-udp_tnl-csum-segmentation`
+    ability to perform TCP segmentation offload of UDP encapsulated frames
+
+ - `rx-udp_tunnel-port-offload`
+    receive side parsing of UDP encapsulated frames which allows NICs to
+    perform protocol-aware offloads, like checksum validation offload of
+    inner frames (only needed by NICs without protocol-agnostic offloads)
+
+For devices supporting `rx-udp_tunnel-port-offload` the list of currently
+offloaded ports can be interrogated with `ethtool`::
+
+  $ ethtool --show-tunnels eth0
+  Tunnel information for eth0:
+    UDP port table 0:
+      Size: 4
+      Types: vxlan
+      No entries
+    UDP port table 1:
+      Size: 4
+      Types: geneve, vxlan-gpe
+      Entries (1):
+          port 1230, vxlan-gpe

MAINTAINERS

@@ -1259,7 +1259,7 @@ S:	Supported
 F:	Documentation/devicetree/bindings/net/apm-xgene-enet.txt
 F:	Documentation/devicetree/bindings/net/apm-xgene-mdio.txt
 F:	drivers/net/ethernet/apm/xgene/
-F:	drivers/net/phy/mdio-xgene.c
+F:	drivers/net/mdio/mdio-xgene.c
 
 APPLIED MICRO (APM) X-GENE SOC PMU
 M:	Khuong Dinh <khuong@os.amperecomputing.com>
@@ -3238,7 +3238,7 @@ M:	Daniel Borkmann <daniel@iogearbox.net>
 R:	Martin KaFai Lau <kafai@fb.com>
 R:	Song Liu <songliubraving@fb.com>
 R:	Yonghong Song <yhs@fb.com>
-R:	Andrii Nakryiko <andriin@fb.com>
+R:	Andrii Nakryiko <andrii@kernel.org>
 R:	John Fastabend <john.fastabend@gmail.com>
 R:	KP Singh <kpsingh@chromium.org>
 L:	netdev@vger.kernel.org
@@ -3914,6 +3914,7 @@ F:	include/net/netns/can.h
 F:	include/uapi/linux/can.h
 F:	include/uapi/linux/can/bcm.h
 F:	include/uapi/linux/can/gw.h
+F:	include/uapi/linux/can/isotp.h
 F:	include/uapi/linux/can/raw.h
 F:	net/can/
 
@@ -4713,6 +4714,15 @@ S:	Supported
 W:	http://www.chelsio.com
 F:	drivers/crypto/chelsio
 
+CXGB4 INLINE CRYPTO DRIVER
+M:	Ayush Sawal <ayush.sawal@chelsio.com>
+M:	Vinay Kumar Yadav <vinay.yadav@chelsio.com>
+M:	Rohit Maheshwari <rohitm@chelsio.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+W:	http://www.chelsio.com
+F:	drivers/net/ethernet/chelsio/inline_crypto/
+
 CXGB4 ETHERNET DRIVER (CXGB4)
 M:	Vishal Kulkarni <vishal@chelsio.com>
 L:	netdev@vger.kernel.org
@@ -6546,11 +6556,14 @@ F:	Documentation/devicetree/bindings/net/ethernet-phy.yaml
 F:	Documentation/devicetree/bindings/net/mdio*
 F:	Documentation/devicetree/bindings/net/qca,ar803x.yaml
 F:	Documentation/networking/phy.rst
+F:	drivers/net/mdio/
+F:	drivers/net/mdio/of_mdio.c
+F:	drivers/net/pcs/
 F:	drivers/net/phy/
-F:	drivers/of/of_mdio.c
 F:	drivers/of/of_net.c
 F:	include/dt-bindings/net/qca-ar803x.h
 F:	include/linux/*mdio*.h
+F:	include/linux/mdio/*.h
 F:	include/linux/of_net.h
 F:	include/linux/phy.h
 F:	include/linux/phy_fixed.h
@@ -10347,6 +10360,13 @@ S:	Maintained
 W:	http://linux-test-project.github.io/
 T:	git git://github.com/linux-test-project/ltp.git
 
+LYNX PCS MODULE
+M:	Ioana Ciornei <ioana.ciornei@nxp.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	drivers/net/pcs/pcs-lynx.c
+F:	include/linux/pcs-lynx.h
+
 M68K ARCHITECTURE
 M:	Geert Uytterhoeven <geert@linux-m68k.org>
 L:	linux-m68k@lists.linux-m68k.org
@@ -10554,7 +10574,7 @@ M:	Tobias Waldekranz <tobias@waldekranz.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/marvell,mvusb.yaml
-F:	drivers/net/phy/mdio-mvusb.c
+F:	drivers/net/mdio/mdio-mvusb.c
 
 MARVELL XENON MMC/SD/SDIO HOST CONTROLLER DRIVER
 M:	Hu Ziji <huziji@marvell.com>
@@ -10701,6 +10721,15 @@ L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/hid/hid-mcp2221.c
 
+MCP251XFD SPI-CAN NETWORK DRIVER
+M:	Marc Kleine-Budde <mkl@pengutronix.de>
+M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+R:	Thomas Kopp <thomas.kopp@microchip.com>
+L:	linux-can@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
+F:	drivers/net/can/spi/mcp251xfd/
+
 MCP4018 AND MCP4531 MICROCHIP DIGITAL POTENTIOMETER DRIVERS
 M:	Peter Rosin <peda@axentia.se>
 L:	linux-iio@vger.kernel.org
@@ -12090,7 +12119,6 @@ M:	Neil Horman <nhorman@tuxdriver.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 W:	https://fedorahosted.org/dropwatch/
-F:	include/net/drop_monitor.h
 F:	include/uapi/linux/net_dropmon.h
 F:	net/core/drop_monitor.c
 
@@ -12185,6 +12213,7 @@ F:	net/ipv6/ipcomp6.c
 F:	net/ipv6/xfrm*
 F:	net/key/
 F:	net/xfrm/
+F:	tools/testing/selftests/net/ipsec.c
 
 NETWORKING [IPv4/IPv6]
 M:	"David S. Miller" <davem@davemloft.net>
@@ -12597,6 +12626,7 @@ F:	drivers/net/dsa/ocelot/*
 F:	drivers/net/ethernet/mscc/
 F:	include/soc/mscc/ocelot*
 F:	net/dsa/tag_ocelot.c
+F:	tools/testing/selftests/drivers/net/ocelot/*
 
 OCXL (Open Coherent Accelerator Processor Interface OpenCAPI) DRIVER
 M:	Frederic Barrat <fbarrat@linux.ibm.com>
@@ -15372,10 +15402,11 @@ F:	drivers/media/platform/s3c-camif/
 F:	include/media/drv-intf/s3c_camif.h
 
 SAMSUNG S3FWRN5 NFC DRIVER
-M:	Robert Baldyga <r.baldyga@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 M:	Krzysztof Opasiak <k.opasiak@samsung.com>
 L:	linux-nfc@lists.01.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
 F:	drivers/nfc/s3fwrn5
 
 SAMSUNG S5C73M3 CAMERA DRIVER
@@ -15762,6 +15793,7 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/phy/phylink.c
 F:	drivers/net/phy/sfp*
+F:	include/linux/mdio/mdio-i2c.h
 F:	include/linux/phylink.h
 F:	include/linux/sfp.h
 K:	phylink\.h|struct\s+phylink|\.phylink|>phylink_|phylink_(autoneg|clear|connect|create|destroy|disconnect|ethtool|helper|mac|mii|of|set|start|stop|test|validate)
@@ -16851,8 +16883,8 @@ SYNOPSYS DESIGNWARE ETHERNET XPCS DRIVER
 M:	Jose Abreu <Jose.Abreu@synopsys.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/phy/mdio-xpcs.c
+F:	drivers/net/pcs/pcs-xpcs.c
-F:	include/linux/mdio-xpcs.h
+F:	include/linux/pcs/pcs-xpcs.h
 
 SYNOPSYS DESIGNWARE I2C DRIVER
 M:	Jarkko Nikula <jarkko.nikula@linux.intel.com>

Makefile

@@ -1071,13 +1071,15 @@ ifdef CONFIG_STACK_VALIDATION
   endif
 endif
 
+ifdef CONFIG_BPF
 ifdef CONFIG_DEBUG_INFO_BTF
   ifeq ($(has_libelf),1)
     resolve_btfids_target := tools/bpf/resolve_btfids FORCE
   else
     ERROR_RESOLVE_BTFIDS := 1
   endif
-endif
+endif # CONFIG_DEBUG_INFO_BTF
+endif # CONFIG_BPF
 
 PHONY += prepare0
 

arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi

@@ -795,8 +795,8 @@ s3fwrn5: nfc@27 {
 		reg = <0x27>;
 		interrupt-parent = <&gpa1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
-		s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
+		en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
-		s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
+		wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
 	};
 };
 

arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts

@@ -199,6 +199,7 @@ qsgmii_phy3: ethernet-phy@13 {
 &enetc_port0 {
 	phy-handle = <&sgmii_phy0>;
 	phy-connection-type = "sgmii";
+	managed = "in-band-status";
 	status = "okay";
 
 	mdio {

arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts

@@ -143,6 +143,56 @@ fixed-link {
 	mdio: mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "mediatek,mt7531";
+			reg = <0>;
+			reset-gpios = <&pio 54 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "wan";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan0";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan1";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan2";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "lan3";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "2500base-x";
+
+					fixed-link {
+						speed = <2500>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+
 	};
 };
 

arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts

@@ -105,20 +105,71 @@ &eth {
 	pinctrl-0 = <&eth_pins>;
 	status = "okay";
 
-	gmac1: mac@1 {
+	gmac0: mac@0 {
 		compatible = "mediatek,eth-mac";
-		reg = <1>;
+		reg = <0>;
-		phy-handle = <&phy5>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
 	};
 
 	mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy5: ethernet-phy@5 {
+		switch@0 {
-			reg = <5>;
+			compatible = "mediatek,mt7531";
-			phy-mode = "sgmii";
+			reg = <0>;
+			reset-gpios = <&pio 54 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan0";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "wan";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "2500base-x";
+
+					fixed-link {
+						speed = <2500>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
 		};
+
 	};
 };
 

arch/mips/boot/dts/mscc/ocelot.dtsi

@@ -134,11 +134,13 @@ switch@1010000 {
 			      <0x1280000 0x100>,
 			      <0x1800000 0x80000>,
 			      <0x1880000 0x10000>,
+			      <0x1040000 0x10000>,
+			      <0x1050000 0x10000>,
 			      <0x1060000 0x10000>;
 			reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
 				    "port2", "port3", "port4", "port5", "port6",
 				    "port7", "port8", "port9", "port10", "qsys",
-				    "ana", "s2";
+				    "ana", "s0", "s1", "s2";
 			interrupts = <18 21 22>;
 			interrupt-names = "ptp_rdy", "xtr", "inj";
 

arch/powerpc/boot/dts/fsl/t1040rdb.dts

@@ -64,6 +64,40 @@ mdio@fc000 {
 				phy_sgmii_2: ethernet-phy@3 {
 					reg = <0x03>;
 				};
+
+				/* VSC8514 QSGMII PHY */
+				phy_qsgmii_0: ethernet-phy@4 {
+					reg = <0x4>;
+				};
+
+				phy_qsgmii_1: ethernet-phy@5 {
+					reg = <0x5>;
+				};
+
+				phy_qsgmii_2: ethernet-phy@6 {
+					reg = <0x6>;
+				};
+
+				phy_qsgmii_3: ethernet-phy@7 {
+					reg = <0x7>;
+				};
+
+				/* VSC8514 QSGMII PHY */
+				phy_qsgmii_4: ethernet-phy@8 {
+					reg = <0x8>;
+				};
+
+				phy_qsgmii_5: ethernet-phy@9 {
+					reg = <0x9>;
+				};
+
+				phy_qsgmii_6: ethernet-phy@a {
+					reg = <0xa>;
+				};
+
+				phy_qsgmii_7: ethernet-phy@b {
+					reg = <0xb>;
+				};
 			};
 		};
 	};
@@ -76,3 +110,76 @@ cpld@3,0 {
 };
 
 #include "t1040si-post.dtsi"
+
+&seville_switch {
+	status = "okay";
+};
+
+&seville_port0 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_0>;
+	phy-mode = "qsgmii";
+	label = "ETH5";
+	status = "okay";
+};
+
+&seville_port1 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_1>;
+	phy-mode = "qsgmii";
+	label = "ETH4";
+	status = "okay";
+};
+
+&seville_port2 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_2>;
+	phy-mode = "qsgmii";
+	label = "ETH7";
+	status = "okay";
+};
+
+&seville_port3 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_3>;
+	phy-mode = "qsgmii";
+	label = "ETH6";
+	status = "okay";
+};
+
+&seville_port4 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_4>;
+	phy-mode = "qsgmii";
+	label = "ETH9";
+	status = "okay";
+};
+
+&seville_port5 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_5>;
+	phy-mode = "qsgmii";
+	label = "ETH8";
+	status = "okay";
+};
+
+&seville_port6 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_6>;
+	phy-mode = "qsgmii";
+	label = "ETH11";
+	status = "okay";
+};
+
+&seville_port7 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_7>;
+	phy-mode = "qsgmii";
+	label = "ETH10";
+	status = "okay";
+};
+
+&seville_port8 {
+	ethernet = <&enet0>;
+	status = "okay";
+};

arch/powerpc/boot/dts/fsl/t1040si-post.dtsi

@@ -628,6 +628,84 @@ mdio@fd000 {
 			status = "disabled";
 		};
 	};
+
+	seville_switch: ethernet-switch@800000 {
+		compatible = "mscc,vsc9953-switch";
+		reg = <0x800000 0x290000>;
+		interrupts = <26 2 0 0>;
+		interrupt-names = "xtr";
+		little-endian;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			seville_port0: port@0 {
+				reg = <0>;
+				status = "disabled";
+			};
+
+			seville_port1: port@1 {
+				reg = <1>;
+				status = "disabled";
+			};
+
+			seville_port2: port@2 {
+				reg = <2>;
+				status = "disabled";
+			};
+
+			seville_port3: port@3 {
+				reg = <3>;
+				status = "disabled";
+			};
+
+			seville_port4: port@4 {
+				reg = <4>;
+				status = "disabled";
+			};
+
+			seville_port5: port@5 {
+				reg = <5>;
+				status = "disabled";
+			};
+
+			seville_port6: port@6 {
+				reg = <6>;
+				status = "disabled";
+			};
+
+			seville_port7: port@7 {
+				reg = <7>;
+				status = "disabled";
+			};
+
+			seville_port8: port@8 {
+				reg = <8>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+
+			seville_port9: port@9 {
+				reg = <9>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+		};
+	};
 };
 
 &qe {

arch/s390/include/asm/ccwdev.h

@@ -238,7 +238,10 @@ extern void ccw_device_get_schid(struct ccw_device *, struct subchannel_id *);
 struct channel_path_desc_fmt0 *ccw_device_get_chp_desc(struct ccw_device *, int);
 u8 *ccw_device_get_util_str(struct ccw_device *cdev, int chp_idx);
 int ccw_device_pnso(struct ccw_device *cdev,
-		    struct chsc_pnso_area *pnso_area,
+		    struct chsc_pnso_area *pnso_area, u8 oc,
-		    struct chsc_pnso_resume_token resume_token,
+		    struct chsc_pnso_resume_token resume_token, int cnc);
-		    int cnc);
+int ccw_device_get_cssid(struct ccw_device *cdev, u8 *cssid);
+int ccw_device_get_iid(struct ccw_device *cdev, u8 *iid);
+int ccw_device_get_chpid(struct ccw_device *cdev, int chp_idx, u8 *chpid);
+int ccw_device_get_chid(struct ccw_device *cdev, int chp_idx, u16 *chid);
 #endif /* _S390_CCWDEV_H_ */

arch/s390/include/asm/chsc.h

@@ -11,6 +11,13 @@
 
 #include <uapi/asm/chsc.h>
 
+/**
+ * Operation codes for CHSC PNSO:
+ *    PNSO_OC_NET_BRIDGE_INFO - only addresses that are visible to a bridgeport
+ *    PNSO_OC_NET_ADDR_INFO   - all addresses
+ */
+#define PNSO_OC_NET_BRIDGE_INFO		0
+#define PNSO_OC_NET_ADDR_INFO		3
 /**
  * struct chsc_pnso_naid_l2 - network address information descriptor
  * @nit:  Network interface token

arch/s390/include/asm/css_chars.h

@@ -36,7 +36,9 @@ struct css_general_char {
 	u64 alt_ssi : 1; /* bit 108 */
 	u64 : 1;
 	u64 narf : 1;	 /* bit 110 */
-	u64 : 12;
+	u64 : 5;
+	u64 enarf: 1;	 /* bit 116 */
+	u64 : 6;
 	u64 util_str : 1;/* bit 123 */
 } __packed;
 

arch/s390/net/bpf_jit_comp.c

@@ -50,7 +50,6 @@ struct bpf_jit {
 	int r14_thunk_ip;	/* Address of expoline thunk for 'br %r14' */
 	int tail_call_start;	/* Tail call start offset */
 	int excnt;		/* Number of exception table entries */
-	int labels[1];		/* Labels for local jumps */
 };
 
 #define SEEN_MEM	BIT(0)		/* use mem[] for temporary storage */
@@ -229,18 +228,18 @@ static inline void reg_set_seen(struct bpf_jit *jit, u32 b1)
 	REG_SET_SEEN(b3);					\
 })
 
-#define EMIT6_PCREL_LABEL(op1, op2, b1, b2, label, mask)	\
+#define EMIT6_PCREL_RIEB(op1, op2, b1, b2, mask, target)	\
 ({								\
-	int rel = (jit->labels[label] - jit->prg) >> 1;		\
+	unsigned int rel = (int)((target) - jit->prg) / 2;	\
 	_EMIT6((op1) | reg(b1, b2) << 16 | (rel & 0xffff),	\
 	       (op2) | (mask) << 12);				\
 	REG_SET_SEEN(b1);					\
 	REG_SET_SEEN(b2);					\
 })
 
-#define EMIT6_PCREL_IMM_LABEL(op1, op2, b1, imm, label, mask)	\
+#define EMIT6_PCREL_RIEC(op1, op2, b1, imm, mask, target)	\
 ({								\
-	int rel = (jit->labels[label] - jit->prg) >> 1;		\
+	unsigned int rel = (int)((target) - jit->prg) / 2;	\
 	_EMIT6((op1) | (reg_high(b1) | (mask)) << 16 |		\
 		(rel & 0xffff), (op2) | ((imm) & 0xff) << 8);	\
 	REG_SET_SEEN(b1);					\
@@ -1282,7 +1281,9 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp,
 		EMIT4(0xb9040000, BPF_REG_0, REG_2);
 		break;
 	}
-	case BPF_JMP | BPF_TAIL_CALL:
+	case BPF_JMP | BPF_TAIL_CALL: {
+		int patch_1_clrj, patch_2_clij, patch_3_brc;
+
 		/*
 		 * Implicit input:
 		 *  B1: pointer to ctx
@@ -1300,16 +1301,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp,
 		EMIT6_DISP_LH(0xe3000000, 0x0016, REG_W1, REG_0, BPF_REG_2,
 			      offsetof(struct bpf_array, map.max_entries));
 		/* if ((u32)%b3 >= (u32)%w1) goto out; */
-		if (!is_first_pass(jit) && can_use_rel(jit, jit->labels[0])) {
+		/* clrj %b3,%w1,0xa,out */
-			/* clrj %b3,%w1,0xa,label0 */
+		patch_1_clrj = jit->prg;
-			EMIT6_PCREL_LABEL(0xec000000, 0x0077, BPF_REG_3,
+		EMIT6_PCREL_RIEB(0xec000000, 0x0077, BPF_REG_3, REG_W1, 0xa,
-					  REG_W1, 0, 0xa);
+				 jit->prg);
-		} else {
-			/* clr %b3,%w1 */
-			EMIT2(0x1500, BPF_REG_3, REG_W1);
-			/* brcl 0xa,label0 */
-			EMIT6_PCREL_RILC(0xc0040000, 0xa, jit->labels[0]);
-		}
 
 		/*
 		 * if (tail_call_cnt++ > MAX_TAIL_CALL_CNT)
@@ -1324,16 +1319,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp,
 		EMIT4_IMM(0xa7080000, REG_W0, 1);
 		/* laal %w1,%w0,off(%r15) */
 		EMIT6_DISP_LH(0xeb000000, 0x00fa, REG_W1, REG_W0, REG_15, off);
-		if (!is_first_pass(jit) && can_use_rel(jit, jit->labels[0])) {
+		/* clij %w1,MAX_TAIL_CALL_CNT,0x2,out */
-			/* clij %w1,MAX_TAIL_CALL_CNT,0x2,label0 */
+		patch_2_clij = jit->prg;
-			EMIT6_PCREL_IMM_LABEL(0xec000000, 0x007f, REG_W1,
+		EMIT6_PCREL_RIEC(0xec000000, 0x007f, REG_W1, MAX_TAIL_CALL_CNT,
-					      MAX_TAIL_CALL_CNT, 0, 0x2);
+				 2, jit->prg);
-		} else {
-			/* clfi %w1,MAX_TAIL_CALL_CNT */
-			EMIT6_IMM(0xc20f0000, REG_W1, MAX_TAIL_CALL_CNT);
-			/* brcl 0x2,label0 */
-			EMIT6_PCREL_RILC(0xc0040000, 0x2, jit->labels[0]);
-		}
 
 		/*
 		 * prog = array->ptrs[index];
@@ -1348,13 +1337,9 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp,
 		/* ltg %r1,prog(%b2,%r1) */
 		EMIT6_DISP_LH(0xe3000000, 0x0002, REG_1, BPF_REG_2,
 			      REG_1, offsetof(struct bpf_array, ptrs));
-		if (!is_first_pass(jit) && can_use_rel(jit, jit->labels[0])) {
+		/* brc 0x8,out */
-			/* brc 0x8,label0 */
+		patch_3_brc = jit->prg;
-			EMIT4_PCREL_RIC(0xa7040000, 0x8, jit->labels[0]);
+		EMIT4_PCREL_RIC(0xa7040000, 8, jit->prg);
-		} else {
-			/* brcl 0x8,label0 */
-			EMIT6_PCREL_RILC(0xc0040000, 0x8, jit->labels[0]);
-		}
 
 		/*
 		 * Restore registers before calling function
@@ -1371,8 +1356,16 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp,
 		/* bc 0xf,tail_call_start(%r1) */
 		_EMIT4(0x47f01000 + jit->tail_call_start);
 		/* out: */
-		jit->labels[0] = jit->prg;
+		if (jit->prg_buf) {
+			*(u16 *)(jit->prg_buf + patch_1_clrj + 2) =
+				(jit->prg - patch_1_clrj) >> 1;
+			*(u16 *)(jit->prg_buf + patch_2_clij + 2) =
+				(jit->prg - patch_2_clij) >> 1;
+			*(u16 *)(jit->prg_buf + patch_3_brc + 2) =
+				(jit->prg - patch_3_brc) >> 1;
+		}
 		break;
+	}
 	case BPF_JMP | BPF_EXIT: /* return b0 */
 		last = (i == fp->len - 1) ? 1 : 0;
 		if (last)

arch/x86/include/asm/nospec-branch.h

@@ -314,19 +314,19 @@ static inline void mds_idle_clear_cpu_buffers(void)
  *    lfence
  *    jmp spec_trap
  *  do_rop:
- *    mov %rax,(%rsp) for x86_64
+ *    mov %rcx,(%rsp) for x86_64
  *    mov %edx,(%esp) for x86_32
  *    retq
  *
  * Without retpolines configured:
  *
- *    jmp *%rax for x86_64
+ *    jmp *%rcx for x86_64
  *    jmp *%edx for x86_32
  */
 #ifdef CONFIG_RETPOLINE
 # ifdef CONFIG_X86_64
-#  define RETPOLINE_RAX_BPF_JIT_SIZE	17
+#  define RETPOLINE_RCX_BPF_JIT_SIZE	17
-#  define RETPOLINE_RAX_BPF_JIT()				\
+#  define RETPOLINE_RCX_BPF_JIT()				\
 do {								\
 	EMIT1_off32(0xE8, 7);	 /* callq do_rop */		\
 	/* spec_trap: */					\
@@ -334,7 +334,7 @@ do {								\
 	EMIT3(0x0F, 0xAE, 0xE8); /* lfence */			\
 	EMIT2(0xEB, 0xF9);       /* jmp spec_trap */		\
 	/* do_rop: */						\
-	EMIT4(0x48, 0x89, 0x04, 0x24); /* mov %rax,(%rsp) */	\
+	EMIT4(0x48, 0x89, 0x0C, 0x24); /* mov %rcx,(%rsp) */	\
 	EMIT1(0xC3);             /* retq */			\
 } while (0)
 # else /* !CONFIG_X86_64 */
@@ -352,9 +352,9 @@ do {								\
 # endif
 #else /* !CONFIG_RETPOLINE */
 # ifdef CONFIG_X86_64
-#  define RETPOLINE_RAX_BPF_JIT_SIZE	2
+#  define RETPOLINE_RCX_BPF_JIT_SIZE	2
-#  define RETPOLINE_RAX_BPF_JIT()				\
+#  define RETPOLINE_RCX_BPF_JIT()				\
-	EMIT2(0xFF, 0xE0);       /* jmp *%rax */
+	EMIT2(0xFF, 0xE1);       /* jmp *%rcx */
 # else /* !CONFIG_X86_64 */
 #  define RETPOLINE_EDX_BPF_JIT()				\
 	EMIT2(0xFF, 0xE2)        /* jmp *%edx */

arch/x86/net/bpf_jit_comp.c

@@ -221,14 +221,48 @@ struct jit_context {
 
 /* Number of bytes emit_patch() needs to generate instructions */
 #define X86_PATCH_SIZE		5
+/* Number of bytes that will be skipped on tailcall */
+#define X86_TAIL_CALL_OFFSET	11
 
-#define PROLOGUE_SIZE		25
+static void push_callee_regs(u8 **pprog, bool *callee_regs_used)
+{
+	u8 *prog = *pprog;
+	int cnt = 0;
+
+	if (callee_regs_used[0])
+		EMIT1(0x53);         /* push rbx */
+	if (callee_regs_used[1])
+		EMIT2(0x41, 0x55);   /* push r13 */
+	if (callee_regs_used[2])
+		EMIT2(0x41, 0x56);   /* push r14 */
+	if (callee_regs_used[3])
+		EMIT2(0x41, 0x57);   /* push r15 */
+	*pprog = prog;
+}
+
+static void pop_callee_regs(u8 **pprog, bool *callee_regs_used)
+{
+	u8 *prog = *pprog;
+	int cnt = 0;
+
+	if (callee_regs_used[3])
+		EMIT2(0x41, 0x5F);   /* pop r15 */
+	if (callee_regs_used[2])
+		EMIT2(0x41, 0x5E);   /* pop r14 */
+	if (callee_regs_used[1])
+		EMIT2(0x41, 0x5D);   /* pop r13 */
+	if (callee_regs_used[0])
+		EMIT1(0x5B);         /* pop rbx */
+	*pprog = prog;
+}
 
 /*
- * Emit x86-64 prologue code for BPF program and check its size.
+ * Emit x86-64 prologue code for BPF program.
- * bpf_tail_call helper will skip it while jumping into another program
+ * bpf_tail_call helper will skip the first X86_TAIL_CALL_OFFSET bytes
+ * while jumping to another program
  */
-static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf)
+static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf,
+			  bool tail_call_reachable, bool is_subprog)
 {
 	u8 *prog = *pprog;
 	int cnt = X86_PATCH_SIZE;
@@ -238,19 +272,19 @@ static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf)
 	 */
 	memcpy(prog, ideal_nops[NOP_ATOMIC5], cnt);
 	prog += cnt;
+	if (!ebpf_from_cbpf) {
+		if (tail_call_reachable && !is_subprog)
+			EMIT2(0x31, 0xC0); /* xor eax, eax */
+		else
+			EMIT2(0x66, 0x90); /* nop2 */
+	}
 	EMIT1(0x55);             /* push rbp */
 	EMIT3(0x48, 0x89, 0xE5); /* mov rbp, rsp */
 	/* sub rsp, rounded_stack_depth */
-	EMIT3_off32(0x48, 0x81, 0xEC, round_up(stack_depth, 8));
+	if (stack_depth)
-	EMIT1(0x53);             /* push rbx */
+		EMIT3_off32(0x48, 0x81, 0xEC, round_up(stack_depth, 8));
-	EMIT2(0x41, 0x55);       /* push r13 */
+	if (tail_call_reachable)
-	EMIT2(0x41, 0x56);       /* push r14 */
+		EMIT1(0x50);         /* push rax */
-	EMIT2(0x41, 0x57);       /* push r15 */
-	if (!ebpf_from_cbpf) {
-		/* zero init tail_call_cnt */
-		EMIT2(0x6a, 0x00);
-		BUILD_BUG_ON(cnt != PROLOGUE_SIZE);
-	}
 	*pprog = prog;
 }
 
@@ -314,13 +348,14 @@ static int __bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t,
 	mutex_lock(&text_mutex);
 	if (memcmp(ip, old_insn, X86_PATCH_SIZE))
 		goto out;
+	ret = 1;
 	if (memcmp(ip, new_insn, X86_PATCH_SIZE)) {
 		if (text_live)
 			text_poke_bp(ip, new_insn, X86_PATCH_SIZE, NULL);
 		else
 			memcpy(ip, new_insn, X86_PATCH_SIZE);
+		ret = 0;
 	}
-	ret = 0;
 out:
 	mutex_unlock(&text_mutex);
 	return ret;
@@ -337,6 +372,22 @@ int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t,
 	return __bpf_arch_text_poke(ip, t, old_addr, new_addr, true);
 }
 
+static int get_pop_bytes(bool *callee_regs_used)
+{
+	int bytes = 0;
+
+	if (callee_regs_used[3])
+		bytes += 2;
+	if (callee_regs_used[2])
+		bytes += 2;
+	if (callee_regs_used[1])
+		bytes += 2;
+	if (callee_regs_used[0])
+		bytes += 1;
+
+	return bytes;
+}
+
 /*
  * Generate the following code:
  *
@@ -351,12 +402,32 @@ int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t,
  *   goto *(prog->bpf_func + prologue_size);
  * out:
  */
-static void emit_bpf_tail_call_indirect(u8 **pprog)
+static void emit_bpf_tail_call_indirect(u8 **pprog, bool *callee_regs_used,
+					u32 stack_depth)
 {
+	int tcc_off = -4 - round_up(stack_depth, 8);
 	u8 *prog = *pprog;
-	int label1, label2, label3;
+	int pop_bytes = 0;
+	int off1 = 42;
+	int off2 = 31;
+	int off3 = 9;
 	int cnt = 0;
 
+	/* count the additional bytes used for popping callee regs from stack
+	 * that need to be taken into account for each of the offsets that
+	 * are used for bailing out of the tail call
+	 */
+	pop_bytes = get_pop_bytes(callee_regs_used);
+	off1 += pop_bytes;
+	off2 += pop_bytes;
+	off3 += pop_bytes;
+
+	if (stack_depth) {
+		off1 += 7;
+		off2 += 7;
+		off3 += 7;
+	}
+
 	/*
 	 * rdi - pointer to ctx
 	 * rsi - pointer to bpf_array
@@ -370,72 +441,112 @@ static void emit_bpf_tail_call_indirect(u8 **pprog)
 	EMIT2(0x89, 0xD2);                        /* mov edx, edx */
 	EMIT3(0x39, 0x56,                         /* cmp dword ptr [rsi + 16], edx */
 	      offsetof(struct bpf_array, map.max_entries));
-#define OFFSET1 (41 + RETPOLINE_RAX_BPF_JIT_SIZE) /* Number of bytes to jump */
+#define OFFSET1 (off1 + RETPOLINE_RCX_BPF_JIT_SIZE) /* Number of bytes to jump */
 	EMIT2(X86_JBE, OFFSET1);                  /* jbe out */
-	label1 = cnt;
 
 	/*
 	 * if (tail_call_cnt > MAX_TAIL_CALL_CNT)
 	 *	goto out;
 	 */
-	EMIT2_off32(0x8B, 0x85, -36 - MAX_BPF_STACK); /* mov eax, dword ptr [rbp - 548] */
+	EMIT2_off32(0x8B, 0x85, tcc_off);         /* mov eax, dword ptr [rbp - tcc_off] */
 	EMIT3(0x83, 0xF8, MAX_TAIL_CALL_CNT);     /* cmp eax, MAX_TAIL_CALL_CNT */
-#define OFFSET2 (30 + RETPOLINE_RAX_BPF_JIT_SIZE)
+#define OFFSET2 (off2 + RETPOLINE_RCX_BPF_JIT_SIZE)
 	EMIT2(X86_JA, OFFSET2);                   /* ja out */
-	label2 = cnt;
 	EMIT3(0x83, 0xC0, 0x01);                  /* add eax, 1 */
-	EMIT2_off32(0x89, 0x85, -36 - MAX_BPF_STACK); /* mov dword ptr [rbp -548], eax */
+	EMIT2_off32(0x89, 0x85, tcc_off);         /* mov dword ptr [rbp - tcc_off], eax */
 
 	/* prog = array->ptrs[index]; */
-	EMIT4_off32(0x48, 0x8B, 0x84, 0xD6,       /* mov rax, [rsi + rdx * 8 + offsetof(...)] */
+	EMIT4_off32(0x48, 0x8B, 0x8C, 0xD6,       /* mov rcx, [rsi + rdx * 8 + offsetof(...)] */
 		    offsetof(struct bpf_array, ptrs));
 
 	/*
 	 * if (prog == NULL)
 	 *	goto out;
 	 */
-	EMIT3(0x48, 0x85, 0xC0);		  /* test rax,rax */
+	EMIT3(0x48, 0x85, 0xC9);                  /* test rcx,rcx */
-#define OFFSET3 (8 + RETPOLINE_RAX_BPF_JIT_SIZE)
+#define OFFSET3 (off3 + RETPOLINE_RCX_BPF_JIT_SIZE)
 	EMIT2(X86_JE, OFFSET3);                   /* je out */
-	label3 = cnt;
 
-	/* goto *(prog->bpf_func + prologue_size); */
+	*pprog = prog;
-	EMIT4(0x48, 0x8B, 0x40,                   /* mov rax, qword ptr [rax + 32] */
+	pop_callee_regs(pprog, callee_regs_used);
+	prog = *pprog;
+
+	EMIT1(0x58);                              /* pop rax */
+	if (stack_depth)
+		EMIT3_off32(0x48, 0x81, 0xC4,     /* add rsp, sd */
+			    round_up(stack_depth, 8));
+
+	/* goto *(prog->bpf_func + X86_TAIL_CALL_OFFSET); */
+	EMIT4(0x48, 0x8B, 0x49,                   /* mov rcx, qword ptr [rcx + 32] */
 	      offsetof(struct bpf_prog, bpf_func));
-	EMIT4(0x48, 0x83, 0xC0, PROLOGUE_SIZE);   /* add rax, prologue_size */
+	EMIT4(0x48, 0x83, 0xC1,                   /* add rcx, X86_TAIL_CALL_OFFSET */
-
+	      X86_TAIL_CALL_OFFSET);
 	/*
-	 * Wow we're ready to jump into next BPF program
+	 * Now we're ready to jump into next BPF program
 	 * rdi == ctx (1st arg)
-	 * rax == prog->bpf_func + prologue_size
+	 * rcx == prog->bpf_func + X86_TAIL_CALL_OFFSET
 	 */
-	RETPOLINE_RAX_BPF_JIT();
+	RETPOLINE_RCX_BPF_JIT();
 
 	/* out: */
-	BUILD_BUG_ON(cnt - label1 != OFFSET1);
-	BUILD_BUG_ON(cnt - label2 != OFFSET2);
-	BUILD_BUG_ON(cnt - label3 != OFFSET3);
 	*pprog = prog;
 }
 
 static void emit_bpf_tail_call_direct(struct bpf_jit_poke_descriptor *poke,
-				      u8 **pprog, int addr, u8 *image)
+				      u8 **pprog, int addr, u8 *image,
+				      bool *callee_regs_used, u32 stack_depth)
 {
+	int tcc_off = -4 - round_up(stack_depth, 8);
 	u8 *prog = *pprog;
+	int pop_bytes = 0;
+	int off1 = 20;
+	int poke_off;
 	int cnt = 0;
 
+	/* count the additional bytes used for popping callee regs to stack
+	 * that need to be taken into account for jump offset that is used for
+	 * bailing out from of the tail call when limit is reached
+	 */
+	pop_bytes = get_pop_bytes(callee_regs_used);
+	off1 += pop_bytes;
+
+	/*
+	 * total bytes for:
+	 * - nop5/ jmpq $off
+	 * - pop callee regs
+	 * - sub rsp, $val if depth > 0
+	 * - pop rax
+	 */
+	poke_off = X86_PATCH_SIZE + pop_bytes + 1;
+	if (stack_depth) {
+		poke_off += 7;
+		off1 += 7;
+	}
+
 	/*
 	 * if (tail_call_cnt > MAX_TAIL_CALL_CNT)
 	 *	goto out;
 	 */
-	EMIT2_off32(0x8B, 0x85, -36 - MAX_BPF_STACK); /* mov eax, dword ptr [rbp - 548] */
+	EMIT2_off32(0x8B, 0x85, tcc_off);             /* mov eax, dword ptr [rbp - tcc_off] */
 	EMIT3(0x83, 0xF8, MAX_TAIL_CALL_CNT);         /* cmp eax, MAX_TAIL_CALL_CNT */
-	EMIT2(X86_JA, 14);                            /* ja out */
+	EMIT2(X86_JA, off1);                          /* ja out */
 	EMIT3(0x83, 0xC0, 0x01);                      /* add eax, 1 */
-	EMIT2_off32(0x89, 0x85, -36 - MAX_BPF_STACK); /* mov dword ptr [rbp -548], eax */
+	EMIT2_off32(0x89, 0x85, tcc_off);             /* mov dword ptr [rbp - tcc_off], eax */
 
-	poke->ip = image + (addr - X86_PATCH_SIZE);
+	poke->tailcall_bypass = image + (addr - poke_off - X86_PATCH_SIZE);
-	poke->adj_off = PROLOGUE_SIZE;
+	poke->adj_off = X86_TAIL_CALL_OFFSET;
+	poke->tailcall_target = image + (addr - X86_PATCH_SIZE);
+	poke->bypass_addr = (u8 *)poke->tailcall_target + X86_PATCH_SIZE;
+
+	emit_jump(&prog, (u8 *)poke->tailcall_target + X86_PATCH_SIZE,
+		  poke->tailcall_bypass);
+
+	*pprog = prog;
+	pop_callee_regs(pprog, callee_regs_used);
+	prog = *pprog;
+	EMIT1(0x58);                                  /* pop rax */
+	if (stack_depth)
+		EMIT3_off32(0x48, 0x81, 0xC4, round_up(stack_depth, 8));
 
 	memcpy(prog, ideal_nops[NOP_ATOMIC5], X86_PATCH_SIZE);
 	prog += X86_PATCH_SIZE;
@@ -453,7 +564,7 @@ static void bpf_tail_call_direct_fixup(struct bpf_prog *prog)
 
 	for (i = 0; i < prog->aux->size_poke_tab; i++) {
 		poke = &prog->aux->poke_tab[i];
-		WARN_ON_ONCE(READ_ONCE(poke->ip_stable));
+		WARN_ON_ONCE(READ_ONCE(poke->tailcall_target_stable));
 
 		if (poke->reason != BPF_POKE_REASON_TAIL_CALL)
 			continue;
@@ -464,18 +575,25 @@ static void bpf_tail_call_direct_fixup(struct bpf_prog *prog)
 		if (target) {
 			/* Plain memcpy is used when image is not live yet
 			 * and still not locked as read-only. Once poke
-			 * location is active (poke->ip_stable), any parallel
+			 * location is active (poke->tailcall_target_stable),
-			 * bpf_arch_text_poke() might occur still on the
+			 * any parallel bpf_arch_text_poke() might occur
-			 * read-write image until we finally locked it as
+			 * still on the read-write image until we finally
-			 * read-only. Both modifications on the given image
+			 * locked it as read-only. Both modifications on
-			 * are under text_mutex to avoid interference.
+			 * the given image are under text_mutex to avoid
+			 * interference.
 			 */
-			ret = __bpf_arch_text_poke(poke->ip, BPF_MOD_JUMP, NULL,
+			ret = __bpf_arch_text_poke(poke->tailcall_target,
+						   BPF_MOD_JUMP, NULL,
 						   (u8 *)target->bpf_func +
 						   poke->adj_off, false);
 			BUG_ON(ret < 0);
+			ret = __bpf_arch_text_poke(poke->tailcall_bypass,
+						   BPF_MOD_JUMP,
+						   (u8 *)poke->tailcall_target +
+						   X86_PATCH_SIZE, NULL, false);
+			BUG_ON(ret < 0);
 		}
-		WRITE_ONCE(poke->ip_stable, true);
+		WRITE_ONCE(poke->tailcall_target_stable, true);
 		mutex_unlock(&array->aux->poke_mutex);
 	}
 }
@@ -652,19 +770,49 @@ static bool ex_handler_bpf(const struct exception_table_entry *x,
 	return true;
 }
 
+static void detect_reg_usage(struct bpf_insn *insn, int insn_cnt,
+			     bool *regs_used, bool *tail_call_seen)
+{
+	int i;
+
+	for (i = 1; i <= insn_cnt; i++, insn++) {
+		if (insn->code == (BPF_JMP | BPF_TAIL_CALL))
+			*tail_call_seen = true;
+		if (insn->dst_reg == BPF_REG_6 || insn->src_reg == BPF_REG_6)
+			regs_used[0] = true;
+		if (insn->dst_reg == BPF_REG_7 || insn->src_reg == BPF_REG_7)
+			regs_used[1] = true;
+		if (insn->dst_reg == BPF_REG_8 || insn->src_reg == BPF_REG_8)
+			regs_used[2] = true;
+		if (insn->dst_reg == BPF_REG_9 || insn->src_reg == BPF_REG_9)
+			regs_used[3] = true;
+	}
+}
+
 static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 		  int oldproglen, struct jit_context *ctx)
 {
+	bool tail_call_reachable = bpf_prog->aux->tail_call_reachable;
 	struct bpf_insn *insn = bpf_prog->insnsi;
+	bool callee_regs_used[4] = {};
 	int insn_cnt = bpf_prog->len;
+	bool tail_call_seen = false;
 	bool seen_exit = false;
 	u8 temp[BPF_MAX_INSN_SIZE + BPF_INSN_SAFETY];
 	int i, cnt = 0, excnt = 0;
 	int proglen = 0;
 	u8 *prog = temp;
 
+	detect_reg_usage(insn, insn_cnt, callee_regs_used,
+			 &tail_call_seen);
+
+	/* tail call's presence in current prog implies it is reachable */
+	tail_call_reachable |= tail_call_seen;
+
 	emit_prologue(&prog, bpf_prog->aux->stack_depth,
-		      bpf_prog_was_classic(bpf_prog));
+		      bpf_prog_was_classic(bpf_prog), tail_call_reachable,
+		      bpf_prog->aux->func_idx != 0);
+	push_callee_regs(&prog, callee_regs_used);
 	addrs[0] = prog - temp;
 
 	for (i = 1; i <= insn_cnt; i++, insn++) {
@@ -1102,16 +1250,27 @@ xadd:			if (is_imm8(insn->off))
 			/* call */
 		case BPF_JMP | BPF_CALL:
 			func = (u8 *) __bpf_call_base + imm32;
-			if (!imm32 || emit_call(&prog, func, image + addrs[i - 1]))
+			if (tail_call_reachable) {
-				return -EINVAL;
+				EMIT3_off32(0x48, 0x8B, 0x85,
+					    -(bpf_prog->aux->stack_depth + 8));
+				if (!imm32 || emit_call(&prog, func, image + addrs[i - 1] + 7))
+					return -EINVAL;
+			} else {
+				if (!imm32 || emit_call(&prog, func, image + addrs[i - 1]))
+					return -EINVAL;
+			}
 			break;
 
 		case BPF_JMP | BPF_TAIL_CALL:
 			if (imm32)
 				emit_bpf_tail_call_direct(&bpf_prog->aux->poke_tab[imm32 - 1],
-							  &prog, addrs[i], image);
+							  &prog, addrs[i], image,
+							  callee_regs_used,
+							  bpf_prog->aux->stack_depth);
 			else
-				emit_bpf_tail_call_indirect(&prog);
+				emit_bpf_tail_call_indirect(&prog,
+							    callee_regs_used,
+							    bpf_prog->aux->stack_depth);
 			break;
 
 			/* cond jump */
@@ -1294,12 +1453,7 @@ xadd:			if (is_imm8(insn->off))
 			seen_exit = true;
 			/* Update cleanup_addr */
 			ctx->cleanup_addr = proglen;
-			if (!bpf_prog_was_classic(bpf_prog))
+			pop_callee_regs(&prog, callee_regs_used);
-				EMIT1(0x5B); /* get rid of tail_call_cnt */
-			EMIT2(0x41, 0x5F);   /* pop r15 */
-			EMIT2(0x41, 0x5E);   /* pop r14 */
-			EMIT2(0x41, 0x5D);   /* pop r13 */
-			EMIT1(0x5B);         /* pop rbx */
 			EMIT1(0xC9);         /* leave */
 			EMIT1(0xC3);         /* ret */
 			break;
@@ -1379,10 +1533,15 @@ static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog,
 	u8 *prog = *pprog;
 	int cnt = 0;
 
-	if (emit_call(&prog, __bpf_prog_enter, prog))
+	if (p->aux->sleepable) {
-		return -EINVAL;
+		if (emit_call(&prog, __bpf_prog_enter_sleepable, prog))
-	/* remember prog start time returned by __bpf_prog_enter */
+			return -EINVAL;
-	emit_mov_reg(&prog, true, BPF_REG_6, BPF_REG_0);
+	} else {
+		if (emit_call(&prog, __bpf_prog_enter, prog))
+			return -EINVAL;
+		/* remember prog start time returned by __bpf_prog_enter */
+		emit_mov_reg(&prog, true, BPF_REG_6, BPF_REG_0);
+	}
 
 	/* arg1: lea rdi, [rbp - stack_size] */
 	EMIT4(0x48, 0x8D, 0x7D, -stack_size);
@@ -1402,13 +1561,18 @@ static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog,
 	if (mod_ret)
 		emit_stx(&prog, BPF_DW, BPF_REG_FP, BPF_REG_0, -8);
 
-	/* arg1: mov rdi, progs[i] */
+	if (p->aux->sleepable) {
-	emit_mov_imm64(&prog, BPF_REG_1, (long) p >> 32,
+		if (emit_call(&prog, __bpf_prog_exit_sleepable, prog))
-		       (u32) (long) p);
+			return -EINVAL;
-	/* arg2: mov rsi, rbx <- start time in nsec */
+	} else {
-	emit_mov_reg(&prog, true, BPF_REG_2, BPF_REG_6);
+		/* arg1: mov rdi, progs[i] */
-	if (emit_call(&prog, __bpf_prog_exit, prog))
+		emit_mov_imm64(&prog, BPF_REG_1, (long) p >> 32,
-		return -EINVAL;
+			       (u32) (long) p);
+		/* arg2: mov rsi, rbx <- start time in nsec */
+		emit_mov_reg(&prog, true, BPF_REG_2, BPF_REG_6);
+		if (emit_call(&prog, __bpf_prog_exit, prog))
+			return -EINVAL;
+	}
 
 	*pprog = prog;
 	return 0;

drivers/atm/atmtcp.c

@@ -327,7 +327,7 @@ static int atmtcp_c_send(struct atm_vcc *vcc,struct sk_buff *skb)
  */
 
 
-static struct atmdev_ops atmtcp_v_dev_ops = {
+static const struct atmdev_ops atmtcp_v_dev_ops = {
 	.dev_close	= atmtcp_v_dev_close,
 	.open		= atmtcp_v_open,
 	.close		= atmtcp_v_close,

drivers/bcma/driver_pci_host.c

@@ -419,12 +419,12 @@ void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
 	pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config;
 	pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config;
 
-	pc_host->mem_resource.name = "BCMA PCIcore external memory",
+	pc_host->mem_resource.name = "BCMA PCIcore external memory";
 	pc_host->mem_resource.start = BCMA_SOC_PCI_DMA;
 	pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1;
 	pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED;
 
-	pc_host->io_resource.name = "BCMA PCIcore external I/O",
+	pc_host->io_resource.name = "BCMA PCIcore external I/O";
 	pc_host->io_resource.start = 0x100;
 	pc_host->io_resource.end = 0x7FF;
 	pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED;

drivers/block/nbd.c

@@ -2184,7 +2184,7 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info)
 	return ret;
 }
 
-static const struct genl_ops nbd_connect_genl_ops[] = {
+static const struct genl_small_ops nbd_connect_genl_ops[] = {
 	{
 		.cmd	= NBD_CMD_CONNECT,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
@@ -2216,8 +2216,8 @@ static struct genl_family nbd_genl_family __ro_after_init = {
 	.name		= NBD_GENL_FAMILY_NAME,
 	.version	= NBD_GENL_VERSION,
 	.module		= THIS_MODULE,
-	.ops		= nbd_connect_genl_ops,
+	.small_ops	= nbd_connect_genl_ops,
-	.n_ops		= ARRAY_SIZE(nbd_connect_genl_ops),
+	.n_small_ops	= ARRAY_SIZE(nbd_connect_genl_ops),
 	.maxattr	= NBD_ATTR_MAX,
 	.policy = nbd_attr_policy,
 	.mcgrps		= nbd_mcast_grps,

drivers/bluetooth/btintel.c

@@ -18,7 +18,11 @@
 
 #define VERSION "0.1"
 
-#define BDADDR_INTEL (&(bdaddr_t) {{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}})
+#define BDADDR_INTEL		(&(bdaddr_t){{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}})
+#define RSA_HEADER_LEN		644
+#define CSS_HEADER_OFFSET	8
+#define ECDSA_OFFSET		644
+#define ECDSA_HEADER_LEN	320
 
 int btintel_check_bdaddr(struct hci_dev *hdev)
 {
@@ -360,6 +364,144 @@ int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver)
 }
 EXPORT_SYMBOL_GPL(btintel_read_version);
 
+void btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
+{
+	const char *variant;
+
+	switch (version->img_type) {
+	case 0x01:
+		variant = "Bootloader";
+		bt_dev_info(hdev, "Device revision is %u", version->dev_rev_id);
+		bt_dev_info(hdev, "Secure boot is %s",
+			    version->secure_boot ? "enabled" : "disabled");
+		bt_dev_info(hdev, "OTP lock is %s",
+			    version->otp_lock ? "enabled" : "disabled");
+		bt_dev_info(hdev, "API lock is %s",
+			    version->api_lock ? "enabled" : "disabled");
+		bt_dev_info(hdev, "Debug lock is %s",
+			    version->debug_lock ? "enabled" : "disabled");
+		bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
+			    version->min_fw_build_nn, version->min_fw_build_cw,
+			    2000 + version->min_fw_build_yy);
+		break;
+	case 0x03:
+		variant = "Firmware";
+		break;
+	default:
+		bt_dev_err(hdev, "Unsupported image type(%02x)", version->img_type);
+		goto done;
+	}
+
+	bt_dev_info(hdev, "%s timestamp %u.%u buildtype %u build %u", variant,
+		    2000 + (version->timestamp >> 8), version->timestamp & 0xff,
+		    version->build_type, version->build_num);
+
+done:
+	return;
+}
+EXPORT_SYMBOL_GPL(btintel_version_info_tlv);
+
+int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
+{
+	struct sk_buff *skb;
+	const u8 param[1] = { 0xFF };
+
+	if (!version)
+		return -EINVAL;
+
+	skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	if (skb->data[0]) {
+		bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
+			   skb->data[0]);
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	/* Consume Command Complete Status field */
+	skb_pull(skb, 1);
+
+	/* Event parameters contatin multiple TLVs. Read each of them
+	 * and only keep the required data. Also, it use existing legacy
+	 * version field like hw_platform, hw_variant, and fw_variant
+	 * to keep the existing setup flow
+	 */
+	while (skb->len) {
+		struct intel_tlv *tlv;
+
+		tlv = (struct intel_tlv *)skb->data;
+		switch (tlv->type) {
+		case INTEL_TLV_CNVI_TOP:
+			version->cnvi_top = get_unaligned_le32(tlv->val);
+			break;
+		case INTEL_TLV_CNVR_TOP:
+			version->cnvr_top = get_unaligned_le32(tlv->val);
+			break;
+		case INTEL_TLV_CNVI_BT:
+			version->cnvi_bt = get_unaligned_le32(tlv->val);
+			break;
+		case INTEL_TLV_CNVR_BT:
+			version->cnvr_bt = get_unaligned_le32(tlv->val);
+			break;
+		case INTEL_TLV_DEV_REV_ID:
+			version->dev_rev_id = get_unaligned_le16(tlv->val);
+			break;
+		case INTEL_TLV_IMAGE_TYPE:
+			version->img_type = tlv->val[0];
+			break;
+		case INTEL_TLV_TIME_STAMP:
+			version->timestamp = get_unaligned_le16(tlv->val);
+			break;
+		case INTEL_TLV_BUILD_TYPE:
+			version->build_type = tlv->val[0];
+			break;
+		case INTEL_TLV_BUILD_NUM:
+			version->build_num = get_unaligned_le32(tlv->val);
+			break;
+		case INTEL_TLV_SECURE_BOOT:
+			version->secure_boot = tlv->val[0];
+			break;
+		case INTEL_TLV_OTP_LOCK:
+			version->otp_lock = tlv->val[0];
+			break;
+		case INTEL_TLV_API_LOCK:
+			version->api_lock = tlv->val[0];
+			break;
+		case INTEL_TLV_DEBUG_LOCK:
+			version->debug_lock = tlv->val[0];
+			break;
+		case INTEL_TLV_MIN_FW:
+			version->min_fw_build_nn = tlv->val[0];
+			version->min_fw_build_cw = tlv->val[1];
+			version->min_fw_build_yy = tlv->val[2];
+			break;
+		case INTEL_TLV_LIMITED_CCE:
+			version->limited_cce = tlv->val[0];
+			break;
+		case INTEL_TLV_SBE_TYPE:
+			version->sbe_type = tlv->val[0];
+			break;
+		case INTEL_TLV_OTP_BDADDR:
+			memcpy(&version->otp_bd_addr, tlv->val, tlv->len);
+			break;
+		default:
+			/* Ignore rest of information */
+			break;
+		}
+		/* consume the current tlv and move to next*/
+		skb_pull(skb, tlv->len + sizeof(*tlv));
+	}
+
+	kfree_skb(skb);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_read_version_tlv);
+
 /* ------- REGMAP IBT SUPPORT ------- */
 
 #define IBT_REG_MODE_8BIT  0x00
@@ -626,12 +768,10 @@ int btintel_read_boot_params(struct hci_dev *hdev,
 }
 EXPORT_SYMBOL_GPL(btintel_read_boot_params);
 
-int btintel_download_firmware(struct hci_dev *hdev, const struct firmware *fw,
+static int btintel_sfi_rsa_header_secure_send(struct hci_dev *hdev,
-			      u32 *boot_param)
+					      const struct firmware *fw)
 {
 	int err;
-	const u8 *fw_ptr;
-	u32 frag_len;
 
 	/* Start the firmware download transaction with the Init fragment
 	 * represented by the 128 bytes of CSS header.
@@ -660,8 +800,56 @@ int btintel_download_firmware(struct hci_dev *hdev, const struct firmware *fw,
 		goto done;
 	}
 
-	fw_ptr = fw->data + 644;
+done:
+	return err;
+}
+
+static int btintel_sfi_ecdsa_header_secure_send(struct hci_dev *hdev,
+						const struct firmware *fw)
+{
+	int err;
+
+	/* Start the firmware download transaction with the Init fragment
+	 * represented by the 128 bytes of CSS header.
+	 */
+	err = btintel_secure_send(hdev, 0x00, 128, fw->data + 644);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send firmware header (%d)", err);
+		return err;
+	}
+
+	/* Send the 96 bytes of public key information from the firmware
+	 * as the PKey fragment.
+	 */
+	err = btintel_secure_send(hdev, 0x03, 96, fw->data + 644 + 128);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send firmware pkey (%d)", err);
+		return err;
+	}
+
+	/* Send the 96 bytes of signature information from the firmware
+	 * as the Sign fragment
+	 */
+	err = btintel_secure_send(hdev, 0x02, 96, fw->data + 644 + 224);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send firmware signature (%d)",
+			   err);
+		return err;
+	}
+	return 0;
+}
+
+static int btintel_download_firmware_payload(struct hci_dev *hdev,
+					     const struct firmware *fw,
+					     u32 *boot_param, size_t offset)
+{
+	int err;
+	const u8 *fw_ptr;
+	u32 frag_len;
+
+	fw_ptr = fw->data + offset;
 	frag_len = 0;
+	err = -EINVAL;
 
 	while (fw_ptr - fw->data < fw->size) {
 		struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
@@ -707,8 +895,99 @@ int btintel_download_firmware(struct hci_dev *hdev, const struct firmware *fw,
 done:
 	return err;
 }
+
+int btintel_download_firmware(struct hci_dev *hdev,
+			      const struct firmware *fw,
+			      u32 *boot_param)
+{
+	int err;
+
+	err = btintel_sfi_rsa_header_secure_send(hdev, fw);
+	if (err)
+		return err;
+
+	return btintel_download_firmware_payload(hdev, fw, boot_param,
+						 RSA_HEADER_LEN);
+}
 EXPORT_SYMBOL_GPL(btintel_download_firmware);
 
+int btintel_download_firmware_newgen(struct hci_dev *hdev,
+				     const struct firmware *fw, u32 *boot_param,
+				     u8 hw_variant, u8 sbe_type)
+{
+	int err;
+	u32 css_header_ver;
+
+	/* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support
+	 * only RSA secure boot engine. Hence, the corresponding sfi file will
+	 * have RSA header of 644 bytes followed by Command Buffer.
+	 *
+	 * iBT hardware variants 0x17, 0x18 onwards support both RSA and ECDSA
+	 * secure boot engine. As a result, the corresponding sfi file will
+	 * have RSA header of 644, ECDSA header of 320 bytes followed by
+	 * Command Buffer.
+	 *
+	 * CSS Header byte positions 0x08 to 0x0B represent the CSS Header
+	 * version: RSA(0x00010000) , ECDSA (0x00020000)
+	 */
+	css_header_ver = get_unaligned_le32(fw->data + CSS_HEADER_OFFSET);
+	if (css_header_ver != 0x00010000) {
+		bt_dev_err(hdev, "Invalid CSS Header version");
+		return -EINVAL;
+	}
+
+	if (hw_variant <= 0x14) {
+		if (sbe_type != 0x00) {
+			bt_dev_err(hdev, "Invalid SBE type for hardware variant (%d)",
+				   hw_variant);
+			return -EINVAL;
+		}
+
+		err = btintel_sfi_rsa_header_secure_send(hdev, fw);
+		if (err)
+			return err;
+
+		err = btintel_download_firmware_payload(hdev, fw, boot_param, RSA_HEADER_LEN);
+		if (err)
+			return err;
+	} else if (hw_variant >= 0x17) {
+		/* Check if CSS header for ECDSA follows the RSA header */
+		if (fw->data[ECDSA_OFFSET] != 0x06)
+			return -EINVAL;
+
+		/* Check if the CSS Header version is ECDSA(0x00020000) */
+		css_header_ver = get_unaligned_le32(fw->data + ECDSA_OFFSET + CSS_HEADER_OFFSET);
+		if (css_header_ver != 0x00020000) {
+			bt_dev_err(hdev, "Invalid CSS Header version");
+			return -EINVAL;
+		}
+
+		if (sbe_type == 0x00) {
+			err = btintel_sfi_rsa_header_secure_send(hdev, fw);
+			if (err)
+				return err;
+
+			err = btintel_download_firmware_payload(hdev, fw,
+								boot_param,
+								RSA_HEADER_LEN + ECDSA_HEADER_LEN);
+			if (err)
+				return err;
+		} else if (sbe_type == 0x01) {
+			err = btintel_sfi_ecdsa_header_secure_send(hdev, fw);
+			if (err)
+				return err;
+
+			err = btintel_download_firmware_payload(hdev, fw,
+								boot_param,
+								RSA_HEADER_LEN + ECDSA_HEADER_LEN);
+			if (err)
+				return err;
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_download_firmware_newgen);
+
 void btintel_reset_to_bootloader(struct hci_dev *hdev)
 {
 	struct intel_reset params;

drivers/bluetooth/btintel.h

@@ -6,6 +6,72 @@
  *  Copyright (C) 2015  Intel Corporation
  */
 
+/* List of tlv type */
+enum {
+	INTEL_TLV_CNVI_TOP = 0x10,
+	INTEL_TLV_CNVR_TOP,
+	INTEL_TLV_CNVI_BT,
+	INTEL_TLV_CNVR_BT,
+	INTEL_TLV_CNVI_OTP,
+	INTEL_TLV_CNVR_OTP,
+	INTEL_TLV_DEV_REV_ID,
+	INTEL_TLV_USB_VENDOR_ID,
+	INTEL_TLV_USB_PRODUCT_ID,
+	INTEL_TLV_PCIE_VENDOR_ID,
+	INTEL_TLV_PCIE_DEVICE_ID,
+	INTEL_TLV_PCIE_SUBSYSTEM_ID,
+	INTEL_TLV_IMAGE_TYPE,
+	INTEL_TLV_TIME_STAMP,
+	INTEL_TLV_BUILD_TYPE,
+	INTEL_TLV_BUILD_NUM,
+	INTEL_TLV_FW_BUILD_PRODUCT,
+	INTEL_TLV_FW_BUILD_HW,
+	INTEL_TLV_FW_STEP,
+	INTEL_TLV_BT_SPEC,
+	INTEL_TLV_MFG_NAME,
+	INTEL_TLV_HCI_REV,
+	INTEL_TLV_LMP_SUBVER,
+	INTEL_TLV_OTP_PATCH_VER,
+	INTEL_TLV_SECURE_BOOT,
+	INTEL_TLV_KEY_FROM_HDR,
+	INTEL_TLV_OTP_LOCK,
+	INTEL_TLV_API_LOCK,
+	INTEL_TLV_DEBUG_LOCK,
+	INTEL_TLV_MIN_FW,
+	INTEL_TLV_LIMITED_CCE,
+	INTEL_TLV_SBE_TYPE,
+	INTEL_TLV_OTP_BDADDR,
+	INTEL_TLV_UNLOCKED_STATE
+};
+
+struct intel_tlv {
+	u8 type;
+	u8 len;
+	u8 val[0];
+} __packed;
+
+struct intel_version_tlv {
+	u32	cnvi_top;
+	u32	cnvr_top;
+	u32	cnvi_bt;
+	u32	cnvr_bt;
+	u16	dev_rev_id;
+	u8	img_type;
+	u16	timestamp;
+	u8	build_type;
+	u32	build_num;
+	u8	secure_boot;
+	u8	otp_lock;
+	u8	api_lock;
+	u8	debug_lock;
+	u8	min_fw_build_nn;
+	u8	min_fw_build_cw;
+	u8	min_fw_build_yy;
+	u8	limited_cce;
+	u8	sbe_type;
+	bdaddr_t otp_bd_addr;
+};
+
 struct intel_version {
 	u8 status;
 	u8 hw_platform;
@@ -77,12 +143,14 @@ int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable);
 void btintel_hw_error(struct hci_dev *hdev, u8 code);
 
 void btintel_version_info(struct hci_dev *hdev, struct intel_version *ver);
+void btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *version);
 int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen,
 			const void *param);
 int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name);
 int btintel_set_event_mask(struct hci_dev *hdev, bool debug);
 int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug);
 int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver);
+int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver);
 
 struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
 				   u16 opcode_write);
@@ -91,6 +159,10 @@ int btintel_read_boot_params(struct hci_dev *hdev,
 			     struct intel_boot_params *params);
 int btintel_download_firmware(struct hci_dev *dev, const struct firmware *fw,
 			      u32 *boot_param);
+int btintel_download_firmware_newgen(struct hci_dev *hdev,
+				     const struct firmware *fw,
+				     u32 *boot_param, u8 hw_variant,
+				     u8 sbe_type);
 void btintel_reset_to_bootloader(struct hci_dev *hdev);
 int btintel_read_debug_features(struct hci_dev *hdev,
 				struct intel_debug_features *features);
@@ -137,6 +209,11 @@ static inline void btintel_version_info(struct hci_dev *hdev,
 {
 }
 
+static inline void btintel_version_info_tlv(struct hci_dev *hdev,
+					    struct intel_version_tlv *version)
+{
+}
+
 static inline int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type,
 				      u32 plen, const void *param)
 {
@@ -165,6 +242,12 @@ static inline int btintel_read_version(struct hci_dev *hdev,
 	return -EOPNOTSUPP;
 }
 
+static inline int btintel_read_version_tlv(struct hci_dev *hdev,
+					   struct intel_version_tlv *ver)
+{
+	return -EOPNOTSUPP;
+}
+
 static inline struct regmap *btintel_regmap_init(struct hci_dev *hdev,
 						 u16 opcode_read,
 						 u16 opcode_write)
@@ -191,6 +274,14 @@ static inline int btintel_download_firmware(struct hci_dev *dev,
 	return -EOPNOTSUPP;
 }
 
+static inline int btintel_download_firmware_newgen(struct hci_dev *hdev,
+						   const struct firmware *fw,
+						   u32 *boot_param,
+						   u8 hw_variant, u8 sbe_type)
+{
+	return -EOPNOTSUPP;
+}
+
 static inline void btintel_reset_to_bootloader(struct hci_dev *hdev)
 {
 }

drivers/bluetooth/btmrvl_sdio.c

@@ -215,30 +215,7 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8897 = {
 	.fw_dump_end = 0xea,
 };
 
-static const struct btmrvl_sdio_card_reg btmrvl_reg_8977 = {
+static const struct btmrvl_sdio_card_reg btmrvl_reg_89xx = {
-	.cfg = 0x00,
-	.host_int_mask = 0x08,
-	.host_intstatus = 0x0c,
-	.card_status = 0x5c,
-	.sq_read_base_addr_a0 = 0xf8,
-	.sq_read_base_addr_a1 = 0xf9,
-	.card_revision = 0xc8,
-	.card_fw_status0 = 0xe8,
-	.card_fw_status1 = 0xe9,
-	.card_rx_len = 0xea,
-	.card_rx_unit = 0xeb,
-	.io_port_0 = 0xe4,
-	.io_port_1 = 0xe5,
-	.io_port_2 = 0xe6,
-	.int_read_to_clear = true,
-	.host_int_rsr = 0x04,
-	.card_misc_cfg = 0xD8,
-	.fw_dump_ctrl = 0xf0,
-	.fw_dump_start = 0xf1,
-	.fw_dump_end = 0xf8,
-};
-
-static const struct btmrvl_sdio_card_reg btmrvl_reg_8987 = {
 	.cfg = 0x00,
 	.host_int_mask = 0x08,
 	.host_intstatus = 0x0c,
@@ -261,29 +238,6 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8987 = {
 	.fw_dump_end = 0xf8,
 };
 
-static const struct btmrvl_sdio_card_reg btmrvl_reg_8997 = {
-	.cfg = 0x00,
-	.host_int_mask = 0x08,
-	.host_intstatus = 0x0c,
-	.card_status = 0x5c,
-	.sq_read_base_addr_a0 = 0xf8,
-	.sq_read_base_addr_a1 = 0xf9,
-	.card_revision = 0xc8,
-	.card_fw_status0 = 0xe8,
-	.card_fw_status1 = 0xe9,
-	.card_rx_len = 0xea,
-	.card_rx_unit = 0xeb,
-	.io_port_0 = 0xe4,
-	.io_port_1 = 0xe5,
-	.io_port_2 = 0xe6,
-	.int_read_to_clear = true,
-	.host_int_rsr = 0x04,
-	.card_misc_cfg = 0xD8,
-	.fw_dump_ctrl = 0xf0,
-	.fw_dump_start = 0xf1,
-	.fw_dump_end = 0xf8,
-};
-
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
 	.helper		= "mrvl/sd8688_helper.bin",
 	.firmware	= "mrvl/sd8688.bin",
@@ -332,7 +286,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8977 = {
 	.helper         = NULL,
 	.firmware       = "mrvl/sdsd8977_combo_v2.bin",
-	.reg            = &btmrvl_reg_8977,
+	.reg            = &btmrvl_reg_89xx,
 	.support_pscan_win_report = true,
 	.sd_blksz_fw_dl = 256,
 	.supports_fw_dump = true,
@@ -341,7 +295,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8977 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8987 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8987_uapsta.bin",
-	.reg		= &btmrvl_reg_8987,
+	.reg		= &btmrvl_reg_89xx,
 	.support_pscan_win_report = true,
 	.sd_blksz_fw_dl	= 256,
 	.supports_fw_dump = true,
@@ -350,7 +304,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8987 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8997 = {
 	.helper         = NULL,
 	.firmware       = "mrvl/sdsd8997_combo_v4.bin",
-	.reg            = &btmrvl_reg_8997,
+	.reg            = &btmrvl_reg_89xx,
 	.support_pscan_win_report = true,
 	.sd_blksz_fw_dl = 256,
 	.supports_fw_dump = true,

drivers/bluetooth/btmtksdio.c

@@ -496,7 +496,7 @@ static void btmtksdio_interrupt(struct sdio_func *func)
 	sdio_claim_host(bdev->func);
 
 	/* Disable interrupt */
-	sdio_writel(func, C_INT_EN_CLR, MTK_REG_CHLPCR, 0);
+	sdio_writel(func, C_INT_EN_CLR, MTK_REG_CHLPCR, NULL);
 
 	int_status = sdio_readl(func, MTK_REG_CHISR, NULL);
 
@@ -530,7 +530,7 @@ static void btmtksdio_interrupt(struct sdio_func *func)
 	}
 
 	/* Enable interrupt */
-	sdio_writel(func, C_INT_EN_SET, MTK_REG_CHLPCR, 0);
+	sdio_writel(func, C_INT_EN_SET, MTK_REG_CHLPCR, NULL);
 
 	pm_runtime_mark_last_busy(bdev->dev);
 	pm_runtime_put_autosuspend(bdev->dev);

drivers/bluetooth/btusb.c

@@ -59,6 +59,7 @@ static struct usb_driver btusb_driver;
 #define BTUSB_MEDIATEK		0x200000
 #define BTUSB_WIDEBAND_SPEECH	0x400000
 #define BTUSB_VALID_LE_STATES   0x800000
+#define BTUSB_QCA_WCN6855	0x1000000
 
 static const struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
@@ -254,24 +255,46 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
 
 	/* QCA ROME chipset */
-	{ USB_DEVICE(0x0cf3, 0x535b), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x0cf3, 0x535b), .driver_info = BTUSB_QCA_ROME |
-	{ USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
+						     BTUSB_WIDEBAND_SPEECH },
-	{ USB_DEVICE(0x0cf3, 0xe009), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME |
-	{ USB_DEVICE(0x0cf3, 0xe010), .driver_info = BTUSB_QCA_ROME },
+						     BTUSB_WIDEBAND_SPEECH },
-	{ USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x0cf3, 0xe009), .driver_info = BTUSB_QCA_ROME |
-	{ USB_DEVICE(0x0cf3, 0xe301), .driver_info = BTUSB_QCA_ROME },
+						     BTUSB_WIDEBAND_SPEECH },
-	{ USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x0cf3, 0xe010), .driver_info = BTUSB_QCA_ROME |
-	{ USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME },
+						     BTUSB_WIDEBAND_SPEECH },
-	{ USB_DEVICE(0x0489, 0xe09f), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME |
-	{ USB_DEVICE(0x0489, 0xe0a2), .driver_info = BTUSB_QCA_ROME },
+						     BTUSB_WIDEBAND_SPEECH },
-	{ USB_DEVICE(0x04ca, 0x3011), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x0cf3, 0xe301), .driver_info = BTUSB_QCA_ROME |
-	{ USB_DEVICE(0x04ca, 0x3015), .driver_info = BTUSB_QCA_ROME },
+						     BTUSB_WIDEBAND_SPEECH },
-	{ USB_DEVICE(0x04ca, 0x3016), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME |
-	{ USB_DEVICE(0x04ca, 0x301a), .driver_info = BTUSB_QCA_ROME },
+						     BTUSB_WIDEBAND_SPEECH },
-	{ USB_DEVICE(0x04ca, 0x3021), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME |
-	{ USB_DEVICE(0x13d3, 0x3491), .driver_info = BTUSB_QCA_ROME },
+						     BTUSB_WIDEBAND_SPEECH },
-	{ USB_DEVICE(0x13d3, 0x3496), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x0489, 0xe09f), .driver_info = BTUSB_QCA_ROME |
-	{ USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME },
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe0a2), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04ca, 0x3011), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04ca, 0x3015), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04ca, 0x3016), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04ca, 0x301a), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04ca, 0x3021), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3491), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3496), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+
+	/* QCA WCN6855 chipset */
+	{ USB_DEVICE(0x0cf3, 0xe600), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
@@ -2338,10 +2361,10 @@ static bool btusb_setup_intel_new_get_fw_name(struct intel_version *ver,
 
 static int btusb_intel_download_firmware(struct hci_dev *hdev,
 					 struct intel_version *ver,
-					 struct intel_boot_params *params)
+					 struct intel_boot_params *params,
+					 u32 *boot_param)
 {
 	const struct firmware *fw;
-	u32 boot_param;
 	char fwname[64];
 	int err;
 	struct btusb_data *data = hci_get_drvdata(hdev);
@@ -2479,7 +2502,7 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
 	set_bit(BTUSB_DOWNLOADING, &data->flags);
 
 	/* Start firmware downloading and get boot parameter */
-	err = btintel_download_firmware(hdev, fw, &boot_param);
+	err = btintel_download_firmware(hdev, fw, boot_param);
 	if (err < 0) {
 		/* When FW download fails, send Intel Reset to retry
 		 * FW download.
@@ -2561,7 +2584,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 		return err;
 	}
 
-	err = btusb_intel_download_firmware(hdev, &ver, &params);
+	err = btusb_intel_download_firmware(hdev, &ver, &params, &boot_param);
 	if (err)
 		return err;
 
@@ -2896,6 +2919,7 @@ static int btusb_mtk_submit_wmt_recv_urb(struct hci_dev *hdev)
 	buf = kmalloc(size, GFP_KERNEL);
 	if (!buf) {
 		kfree(dr);
+		usb_free_urb(urb);
 		return -ENOMEM;
 	}
 
@@ -3390,6 +3414,27 @@ static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
 	return 0;
 }
 
+static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev,
+				const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	u8 buf[6];
+	long ret;
+
+	memcpy(buf, bdaddr, sizeof(bdaddr_t));
+
+	skb = __hci_cmd_sync_ev(hdev, 0xfc14, sizeof(buf), buf,
+				HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		ret = PTR_ERR(skb);
+		bt_dev_err(hdev, "Change address command failed (%ld)", ret);
+		return ret;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
 #define QCA_DFU_PACKET_LEN	4096
 
 #define QCA_GET_TARGET_VERSION	0x09
@@ -3409,7 +3454,8 @@ struct qca_version {
 } __packed;
 
 struct qca_rampatch_version {
-	__le16	rom_version;
+	__le16	rom_version_high;
+	__le16  rom_version_low;
 	__le16	patch_version;
 } __packed;
 
@@ -3421,12 +3467,14 @@ struct qca_device_info {
 };
 
 static const struct qca_device_info qca_devices_table[] = {
-	{ 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
+	{ 0x00000100, 20, 4,  8 }, /* Rome 1.0 */
-	{ 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
+	{ 0x00000101, 20, 4,  8 }, /* Rome 1.1 */
-	{ 0x00000200, 28, 4, 18 }, /* Rome 2.0 */
+	{ 0x00000200, 28, 4, 16 }, /* Rome 2.0 */
-	{ 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
+	{ 0x00000201, 28, 4, 16 }, /* Rome 2.1 */
-	{ 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
+	{ 0x00000300, 28, 4, 16 }, /* Rome 3.0 */
-	{ 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
+	{ 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
+	{ 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
+	{ 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
 };
 
 static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request,
@@ -3528,8 +3576,8 @@ static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
 {
 	struct qca_rampatch_version *rver;
 	const struct firmware *fw;
-	u32 ver_rom, ver_patch;
+	u32 ver_rom, ver_patch, rver_rom;
-	u16 rver_rom, rver_patch;
+	u16 rver_rom_low, rver_rom_high, rver_patch;
 	char fwname[64];
 	int err;
 
@@ -3548,9 +3596,16 @@ static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
 	bt_dev_info(hdev, "using rampatch file: %s", fwname);
 
 	rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset);
-	rver_rom = le16_to_cpu(rver->rom_version);
+	rver_rom_low = le16_to_cpu(rver->rom_version_low);
 	rver_patch = le16_to_cpu(rver->patch_version);
 
+	if (ver_rom & ~0xffffU) {
+		rver_rom_high = le16_to_cpu(rver->rom_version_high);
+		rver_rom = le32_to_cpu(rver_rom_high << 16 | rver_rom_low);
+	} else {
+		rver_rom = rver_rom_low;
+	}
+
 	bt_dev_info(hdev, "QCA: patch rome 0x%x build 0x%x, "
 		    "firmware rome 0x%x build 0x%x",
 		    rver_rom, rver_patch, ver_rom, ver_patch);
@@ -3624,9 +3679,6 @@ static int btusb_setup_qca(struct hci_dev *hdev)
 		return err;
 
 	ver_rom = le32_to_cpu(ver.rom_version);
-	/* Don't care about high ROM versions */
-	if (ver_rom & ~0xffffU)
-		return 0;
 
 	for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) {
 		if (ver_rom == qca_devices_table[i].rom_version)
@@ -4062,6 +4114,13 @@ static int btusb_probe(struct usb_interface *intf,
 		btusb_check_needs_reset_resume(intf);
 	}
 
+	if (id->driver_info & BTUSB_QCA_WCN6855) {
+		data->setup_on_usb = btusb_setup_qca;
+		hdev->set_bdaddr = btusb_set_bdaddr_wcn6855;
+		hdev->cmd_timeout = btusb_qca_cmd_timeout;
+		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+	}
+
 	if (id->driver_info & BTUSB_AMP) {
 		/* AMP controllers do not support SCO packets */
 		data->isoc = NULL;

drivers/bluetooth/hci_h5.c

@@ -793,8 +793,6 @@ static int h5_serdev_probe(struct serdev_device *serdev)
 	if (!h5)
 		return -ENOMEM;
 
-	set_bit(HCI_UART_RESET_ON_INIT, &h5->serdev_hu.hdev_flags);
-
 	h5->hu = &h5->serdev_hu;
 	h5->serdev_hu.serdev = serdev;
 	serdev_device_set_drvdata(serdev, h5);

drivers/bluetooth/hci_intel.c

@@ -288,7 +288,7 @@ static irqreturn_t intel_irq(int irq, void *dev_id)
 
 static int intel_set_power(struct hci_uart *hu, bool powered)
 {
-	struct list_head *p;
+	struct intel_device *idev;
 	int err = -ENODEV;
 
 	if (!hu->tty->dev)
@@ -296,10 +296,7 @@ static int intel_set_power(struct hci_uart *hu, bool powered)
 
 	mutex_lock(&intel_device_list_lock);
 
-	list_for_each(p, &intel_device_list) {
+	list_for_each_entry(idev, &intel_device_list, list) {
-		struct intel_device *idev = list_entry(p, struct intel_device,
-						       list);
-
 		/* tty device and pdev device should share the same parent
 		 * which is the UART port.
 		 */
@@ -362,19 +359,16 @@ static int intel_set_power(struct hci_uart *hu, bool powered)
 
 static void intel_busy_work(struct work_struct *work)
 {
-	struct list_head *p;
 	struct intel_data *intel = container_of(work, struct intel_data,
 						busy_work);
+	struct intel_device *idev;
 
 	if (!intel->hu->tty->dev)
 		return;
 
 	/* Link is busy, delay the suspend */
 	mutex_lock(&intel_device_list_lock);
-	list_for_each(p, &intel_device_list) {
+	list_for_each_entry(idev, &intel_device_list, list) {
-		struct intel_device *idev = list_entry(p, struct intel_device,
-						       list);
-
 		if (intel->hu->tty->dev->parent == idev->pdev->dev.parent) {
 			pm_runtime_get(&idev->pdev->dev);
 			pm_runtime_mark_last_busy(&idev->pdev->dev);
@@ -533,7 +527,7 @@ static int intel_setup(struct hci_uart *hu)
 	struct sk_buff *skb;
 	struct intel_version ver;
 	struct intel_boot_params params;
-	struct list_head *p;
+	struct intel_device *idev;
 	const struct firmware *fw;
 	char fwname[64];
 	u32 boot_param;
@@ -693,14 +687,11 @@ static int intel_setup(struct hci_uart *hu)
 	case 0x0b:      /* SfP */
 	case 0x0c:      /* WsP */
 		snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.sfi",
-			 le16_to_cpu(ver.hw_variant),
+			 ver.hw_variant, le16_to_cpu(params.dev_revid));
-			 le16_to_cpu(params.dev_revid));
 		break;
 	case 0x12:      /* ThP */
 		snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u-%u.sfi",
-			 le16_to_cpu(ver.hw_variant),
+			 ver.hw_variant, ver.hw_revision, ver.fw_revision);
-			 le16_to_cpu(ver.hw_revision),
-			 le16_to_cpu(ver.fw_revision));
 		break;
 	default:
 		bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
@@ -722,14 +713,11 @@ static int intel_setup(struct hci_uart *hu)
 	case 0x0b:      /* SfP */
 	case 0x0c:      /* WsP */
 		snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.ddc",
-			 le16_to_cpu(ver.hw_variant),
+			 ver.hw_variant, le16_to_cpu(params.dev_revid));
-			 le16_to_cpu(params.dev_revid));
 		break;
 	case 0x12:      /* ThP */
 		snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u-%u.ddc",
-			 le16_to_cpu(ver.hw_variant),
+			 ver.hw_variant, ver.hw_revision, ver.fw_revision);
-			 le16_to_cpu(ver.hw_revision),
-			 le16_to_cpu(ver.fw_revision));
 		break;
 	default:
 		bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
@@ -839,13 +827,11 @@ static int intel_setup(struct hci_uart *hu)
 	 * until further LPM TX notification.
 	 */
 	mutex_lock(&intel_device_list_lock);
-	list_for_each(p, &intel_device_list) {
+	list_for_each_entry(idev, &intel_device_list, list) {
-		struct intel_device *dev = list_entry(p, struct intel_device,
-						      list);
 		if (!hu->tty->dev)
 			break;
-		if (hu->tty->dev->parent == dev->pdev->dev.parent) {
+		if (hu->tty->dev->parent == idev->pdev->dev.parent) {
-			if (device_may_wakeup(&dev->pdev->dev)) {
+			if (device_may_wakeup(&idev->pdev->dev)) {
 				set_bit(STATE_LPM_ENABLED, &intel->flags);
 				set_bit(STATE_TX_ACTIVE, &intel->flags);
 			}
@@ -999,7 +985,7 @@ static int intel_recv(struct hci_uart *hu, const void *data, int count)
 static int intel_enqueue(struct hci_uart *hu, struct sk_buff *skb)
 {
 	struct intel_data *intel = hu->priv;
-	struct list_head *p;
+	struct intel_device *idev;
 
 	BT_DBG("hu %p skb %p", hu, skb);
 
@@ -1010,10 +996,7 @@ static int intel_enqueue(struct hci_uart *hu, struct sk_buff *skb)
 	 * completed before enqueuing any packet.
 	 */
 	mutex_lock(&intel_device_list_lock);
-	list_for_each(p, &intel_device_list) {
+	list_for_each_entry(idev, &intel_device_list, list) {
-		struct intel_device *idev = list_entry(p, struct intel_device,
-						       list);
-
 		if (hu->tty->dev->parent == idev->pdev->dev.parent) {
 			pm_runtime_get_sync(&idev->pdev->dev);
 			pm_runtime_mark_last_busy(&idev->pdev->dev);
@@ -1076,7 +1059,8 @@ static const struct hci_uart_proto intel_proto = {
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id intel_acpi_match[] = {
 	{ "INT33E1", 0 },
-	{ },
+	{ "INT33E3", 0 },
+	{ }
 };
 MODULE_DEVICE_TABLE(acpi, intel_acpi_match);
 #endif
@@ -1138,9 +1122,9 @@ static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
 static const struct acpi_gpio_params host_wake_gpios = { 1, 0, false };
 
 static const struct acpi_gpio_mapping acpi_hci_intel_gpios[] = {
-	{ "reset-gpios", &reset_gpios, 1 },
+	{ "reset-gpios", &reset_gpios, 1, ACPI_GPIO_QUIRK_ONLY_GPIOIO },
-	{ "host-wake-gpios", &host_wake_gpios, 1 },
+	{ "host-wake-gpios", &host_wake_gpios, 1, ACPI_GPIO_QUIRK_ONLY_GPIOIO },
-	{ },
+	{ }
 };
 
 static int intel_probe(struct platform_device *pdev)

drivers/bluetooth/hci_ldisc.c

@@ -538,6 +538,7 @@ static void hci_uart_tty_close(struct tty_struct *tty)
 		clear_bit(HCI_UART_PROTO_READY, &hu->flags);
 		percpu_up_write(&hu->proto_lock);
 
+		cancel_work_sync(&hu->init_ready);
 		cancel_work_sync(&hu->write_work);
 
 		if (hdev) {

drivers/bluetooth/hci_qca.c

@@ -693,8 +693,6 @@ static int qca_close(struct hci_uart *hu)
 	destroy_workqueue(qca->workqueue);
 	qca->hu = NULL;
 
-	qca_power_shutdown(hu);
-
 	kfree_skb(qca->rx_skb);
 
 	hu->priv = NULL;
@@ -2007,8 +2005,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 		err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
 		if (err) {
 			BT_ERR("Rome serdev registration failed");
-			if (qcadev->susclk)
+			clk_disable_unprepare(qcadev->susclk);
-				clk_disable_unprepare(qcadev->susclk);
 			return err;
 		}
 	}
@@ -2032,8 +2029,9 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 static void qca_serdev_remove(struct serdev_device *serdev)
 {
 	struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
+	struct qca_power *power = qcadev->bt_power;
 
-	if (qca_is_wcn399x(qcadev->btsoc_type))
+	if (qca_is_wcn399x(qcadev->btsoc_type) && power->vregs_on)
 		qca_power_shutdown(&qcadev->serdev_hu);
 	else if (qcadev->susclk)
 		clk_disable_unprepare(qcadev->susclk);

drivers/bluetooth/hci_serdev.c

@@ -113,8 +113,22 @@ static int hci_uart_flush(struct hci_dev *hdev)
 /* Initialize device */
 static int hci_uart_open(struct hci_dev *hdev)
 {
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	int err;
+
 	BT_DBG("%s %p", hdev->name, hdev);
 
+	/* When Quirk HCI_QUIRK_NON_PERSISTENT_SETUP is set by
+	 * driver, BT SoC is completely turned OFF during
+	 * BT OFF. Upon next BT ON UART port should be opened.
+	 */
+	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) {
+		err = serdev_device_open(hu->serdev);
+		if (err)
+			return err;
+		set_bit(HCI_UART_PROTO_READY, &hu->flags);
+	}
+
 	/* Undo clearing this from hci_uart_close() */
 	hdev->flush = hci_uart_flush;
 
@@ -124,11 +138,25 @@ static int hci_uart_open(struct hci_dev *hdev)
 /* Close device */
 static int hci_uart_close(struct hci_dev *hdev)
 {
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+
 	BT_DBG("hdev %p", hdev);
 
+	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags))
+		return 0;
+
 	hci_uart_flush(hdev);
 	hdev->flush = NULL;
 
+	/* When QUIRK HCI_QUIRK_NON_PERSISTENT_SETUP is set by driver,
+	 * BT SOC is completely powered OFF during BT OFF, holding port
+	 * open may drain the battery.
+	 */
+	if (test_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks)) {
+		clear_bit(HCI_UART_PROTO_READY, &hu->flags);
+		serdev_device_close(hu->serdev);
+	}
+
 	return 0;
 }
 
@@ -354,7 +382,7 @@ void hci_uart_unregister_device(struct hci_uart *hu)
 {
 	struct hci_dev *hdev = hu->hdev;
 
-	clear_bit(HCI_UART_PROTO_READY, &hu->flags);
+	cancel_work_sync(&hu->init_ready);
 	if (test_bit(HCI_UART_REGISTERED, &hu->flags))
 		hci_unregister_dev(hdev);
 	hci_free_dev(hdev);
@@ -362,6 +390,10 @@ void hci_uart_unregister_device(struct hci_uart *hu)
 	cancel_work_sync(&hu->write_work);
 
 	hu->proto->close(hu);
-	serdev_device_close(hu->serdev);
+
+	if (test_bit(HCI_UART_PROTO_READY, &hu->flags)) {
+		clear_bit(HCI_UART_PROTO_READY, &hu->flags);
+		serdev_device_close(hu->serdev);
+	}
 }
 EXPORT_SYMBOL_GPL(hci_uart_unregister_device);

drivers/connector/connector.c

@@ -197,17 +197,12 @@ int cn_add_callback(struct cb_id *id, const char *name,
 		    void (*callback)(struct cn_msg *,
 				     struct netlink_skb_parms *))
 {
-	int err;
 	struct cn_dev *dev = &cdev;
 
 	if (!cn_already_initialized)
 		return -EAGAIN;
 
-	err = cn_queue_add_callback(dev->cbdev, name, id, callback);
+	return cn_queue_add_callback(dev->cbdev, name, id, callback);
-	if (err)
-		return err;
-
-	return 0;
 }
 EXPORT_SYMBOL_GPL(cn_add_callback);
 

drivers/crypto/chelsio/Kconfig

@@ -21,35 +21,3 @@ config CRYPTO_DEV_CHELSIO
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called chcr.
-
-config CHELSIO_IPSEC_INLINE
-	bool "Chelsio IPSec XFRM Tx crypto offload"
-	depends on CHELSIO_T4
-	depends on CRYPTO_DEV_CHELSIO
-	depends on XFRM_OFFLOAD
-	depends on INET_ESP_OFFLOAD || INET6_ESP_OFFLOAD
-	default n
-	help
-	  Enable support for IPSec Tx Inline.
-
-config CRYPTO_DEV_CHELSIO_TLS
-	tristate "Chelsio Crypto Inline TLS Driver"
-	depends on CHELSIO_T4
-	depends on TLS_TOE
-	select CRYPTO_DEV_CHELSIO
-	help
-	  Support Chelsio Inline TLS with Chelsio crypto accelerator.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called chtls.
-
-config CHELSIO_TLS_DEVICE
-	bool "Chelsio Inline KTLS Offload"
-	depends on CHELSIO_T4
-	depends on TLS_DEVICE
-	select CRYPTO_DEV_CHELSIO
-	default y
-	help
-	  This flag enables support for kernel tls offload over Chelsio T6
-	  crypto accelerator. CONFIG_CHELSIO_TLS_DEVICE flag can be enabled
-	  only if CONFIG_TLS and CONFIG_TLS_DEVICE flags are enabled.

drivers/crypto/chelsio/Makefile

@@ -3,8 +3,3 @@ ccflags-y := -I $(srctree)/drivers/net/ethernet/chelsio/cxgb4
 
 obj-$(CONFIG_CRYPTO_DEV_CHELSIO) += chcr.o
 chcr-objs :=  chcr_core.o chcr_algo.o
-#ifdef CONFIG_CHELSIO_TLS_DEVICE
-chcr-objs += chcr_ktls.o
-#endif
-chcr-$(CONFIG_CHELSIO_IPSEC_INLINE) += chcr_ipsec.o
-obj-$(CONFIG_CRYPTO_DEV_CHELSIO_TLS) += chtls/

drivers/crypto/chelsio/chcr_algo.h

@@ -86,39 +86,6 @@
 	 KEY_CONTEXT_OPAD_PRESENT_M)
 #define KEY_CONTEXT_OPAD_PRESENT_F      KEY_CONTEXT_OPAD_PRESENT_V(1U)
 
-#define TLS_KEYCTX_RXFLIT_CNT_S 24
-#define TLS_KEYCTX_RXFLIT_CNT_V(x) ((x) << TLS_KEYCTX_RXFLIT_CNT_S)
-
-#define TLS_KEYCTX_RXPROT_VER_S 20
-#define TLS_KEYCTX_RXPROT_VER_M 0xf
-#define TLS_KEYCTX_RXPROT_VER_V(x) ((x) << TLS_KEYCTX_RXPROT_VER_S)
-
-#define TLS_KEYCTX_RXCIPH_MODE_S 16
-#define TLS_KEYCTX_RXCIPH_MODE_M 0xf
-#define TLS_KEYCTX_RXCIPH_MODE_V(x) ((x) << TLS_KEYCTX_RXCIPH_MODE_S)
-
-#define TLS_KEYCTX_RXAUTH_MODE_S 12
-#define TLS_KEYCTX_RXAUTH_MODE_M 0xf
-#define TLS_KEYCTX_RXAUTH_MODE_V(x) ((x) << TLS_KEYCTX_RXAUTH_MODE_S)
-
-#define TLS_KEYCTX_RXCIAU_CTRL_S 11
-#define TLS_KEYCTX_RXCIAU_CTRL_V(x) ((x) << TLS_KEYCTX_RXCIAU_CTRL_S)
-
-#define TLS_KEYCTX_RX_SEQCTR_S 9
-#define TLS_KEYCTX_RX_SEQCTR_M 0x3
-#define TLS_KEYCTX_RX_SEQCTR_V(x) ((x) << TLS_KEYCTX_RX_SEQCTR_S)
-
-#define TLS_KEYCTX_RX_VALID_S 8
-#define TLS_KEYCTX_RX_VALID_V(x) ((x) << TLS_KEYCTX_RX_VALID_S)
-
-#define TLS_KEYCTX_RXCK_SIZE_S 3
-#define TLS_KEYCTX_RXCK_SIZE_M 0x7
-#define TLS_KEYCTX_RXCK_SIZE_V(x) ((x) << TLS_KEYCTX_RXCK_SIZE_S)
-
-#define TLS_KEYCTX_RXMK_SIZE_S 0
-#define TLS_KEYCTX_RXMK_SIZE_M 0x7
-#define TLS_KEYCTX_RXMK_SIZE_V(x) ((x) << TLS_KEYCTX_RXMK_SIZE_S)
-
 #define CHCR_HASH_MAX_DIGEST_SIZE 64
 #define CHCR_MAX_SHA_DIGEST_SIZE 64
 

drivers/crypto/chelsio/chcr_core.c

@@ -33,23 +33,8 @@ static int cpl_fw6_pld_handler(struct adapter *adap, unsigned char *input);
 static void *chcr_uld_add(const struct cxgb4_lld_info *lld);
 static int chcr_uld_state_change(void *handle, enum cxgb4_state state);
 
-#if defined(CONFIG_CHELSIO_TLS_DEVICE)
-static const struct tlsdev_ops chcr_ktls_ops = {
-	.tls_dev_add = chcr_ktls_dev_add,
-	.tls_dev_del = chcr_ktls_dev_del,
-};
-#endif
-
-#ifdef CONFIG_CHELSIO_IPSEC_INLINE
-static void update_netdev_features(void);
-#endif /* CONFIG_CHELSIO_IPSEC_INLINE */
-
 static chcr_handler_func work_handlers[NUM_CPL_CMDS] = {
 	[CPL_FW6_PLD] = cpl_fw6_pld_handler,
-#ifdef CONFIG_CHELSIO_TLS_DEVICE
-	[CPL_ACT_OPEN_RPL] = chcr_ktls_cpl_act_open_rpl,
-	[CPL_SET_TCB_RPL] = chcr_ktls_cpl_set_tcb_rpl,
-#endif
 };
 
 static struct cxgb4_uld_info chcr_uld_info = {
@@ -60,12 +45,6 @@ static struct cxgb4_uld_info chcr_uld_info = {
 	.add = chcr_uld_add,
 	.state_change = chcr_uld_state_change,
 	.rx_handler = chcr_uld_rx_handler,
-#if defined(CONFIG_CHELSIO_IPSEC_INLINE) || defined(CONFIG_CHELSIO_TLS_DEVICE)
-	.tx_handler = chcr_uld_tx_handler,
-#endif /* CONFIG_CHELSIO_IPSEC_INLINE || CONFIG_CHELSIO_TLS_DEVICE */
-#if defined(CONFIG_CHELSIO_TLS_DEVICE)
-	.tlsdev_ops = &chcr_ktls_ops,
-#endif
 };
 
 static void detach_work_fn(struct work_struct *work)
@@ -241,23 +220,6 @@ int chcr_uld_rx_handler(void *handle, const __be64 *rsp,
 	return 0;
 }
 
-#if defined(CONFIG_CHELSIO_IPSEC_INLINE) || defined(CONFIG_CHELSIO_TLS_DEVICE)
-int chcr_uld_tx_handler(struct sk_buff *skb, struct net_device *dev)
-{
-	/* In case if skb's decrypted bit is set, it's nic tls packet, else it's
-	 * ipsec packet.
-	 */
-#ifdef CONFIG_CHELSIO_TLS_DEVICE
-	if (skb->decrypted)
-		return chcr_ktls_xmit(skb, dev);
-#endif
-#ifdef CONFIG_CHELSIO_IPSEC_INLINE
-	return chcr_ipsec_xmit(skb, dev);
-#endif
-	return 0;
-}
-#endif /* CONFIG_CHELSIO_IPSEC_INLINE || CONFIG_CHELSIO_TLS_DEVICE */
-
 static void chcr_detach_device(struct uld_ctx *u_ctx)
 {
 	struct chcr_dev *dev = &u_ctx->dev;
@@ -305,24 +267,6 @@ static int chcr_uld_state_change(void *handle, enum cxgb4_state state)
 	return ret;
 }
 
-#ifdef CONFIG_CHELSIO_IPSEC_INLINE
-static void update_netdev_features(void)
-{
-	struct uld_ctx *u_ctx, *tmp;
-
-	mutex_lock(&drv_data.drv_mutex);
-	list_for_each_entry_safe(u_ctx, tmp, &drv_data.inact_dev, entry) {
-		if (u_ctx->lldi.crypto & ULP_CRYPTO_IPSEC_INLINE)
-			chcr_add_xfrmops(&u_ctx->lldi);
-	}
-	list_for_each_entry_safe(u_ctx, tmp, &drv_data.act_dev, entry) {
-		if (u_ctx->lldi.crypto & ULP_CRYPTO_IPSEC_INLINE)
-			chcr_add_xfrmops(&u_ctx->lldi);
-	}
-	mutex_unlock(&drv_data.drv_mutex);
-}
-#endif /* CONFIG_CHELSIO_IPSEC_INLINE */
-
 static int __init chcr_crypto_init(void)
 {
 	INIT_LIST_HEAD(&drv_data.act_dev);
@@ -332,12 +276,6 @@ static int __init chcr_crypto_init(void)
 	drv_data.last_dev = NULL;
 	cxgb4_register_uld(CXGB4_ULD_CRYPTO, &chcr_uld_info);
 
-	#ifdef CONFIG_CHELSIO_IPSEC_INLINE
-	rtnl_lock();
-	update_netdev_features();
-	rtnl_unlock();
-	#endif /* CONFIG_CHELSIO_IPSEC_INLINE */
-
 	return 0;
 }
 

drivers/crypto/chelsio/chcr_core.h

@@ -72,54 +72,6 @@ struct _key_ctx {
 	unsigned char key[];
 };
 
-#define KEYCTX_TX_WR_IV_S  55
-#define KEYCTX_TX_WR_IV_M  0x1ffULL
-#define KEYCTX_TX_WR_IV_V(x) ((x) << KEYCTX_TX_WR_IV_S)
-#define KEYCTX_TX_WR_IV_G(x) \
-	(((x) >> KEYCTX_TX_WR_IV_S) & KEYCTX_TX_WR_IV_M)
-
-#define KEYCTX_TX_WR_AAD_S 47
-#define KEYCTX_TX_WR_AAD_M 0xffULL
-#define KEYCTX_TX_WR_AAD_V(x) ((x) << KEYCTX_TX_WR_AAD_S)
-#define KEYCTX_TX_WR_AAD_G(x) (((x) >> KEYCTX_TX_WR_AAD_S) & \
-				KEYCTX_TX_WR_AAD_M)
-
-#define KEYCTX_TX_WR_AADST_S 39
-#define KEYCTX_TX_WR_AADST_M 0xffULL
-#define KEYCTX_TX_WR_AADST_V(x) ((x) << KEYCTX_TX_WR_AADST_S)
-#define KEYCTX_TX_WR_AADST_G(x) \
-	(((x) >> KEYCTX_TX_WR_AADST_S) & KEYCTX_TX_WR_AADST_M)
-
-#define KEYCTX_TX_WR_CIPHER_S 30
-#define KEYCTX_TX_WR_CIPHER_M 0x1ffULL
-#define KEYCTX_TX_WR_CIPHER_V(x) ((x) << KEYCTX_TX_WR_CIPHER_S)
-#define KEYCTX_TX_WR_CIPHER_G(x) \
-	(((x) >> KEYCTX_TX_WR_CIPHER_S) & KEYCTX_TX_WR_CIPHER_M)
-
-#define KEYCTX_TX_WR_CIPHERST_S 23
-#define KEYCTX_TX_WR_CIPHERST_M 0x7f
-#define KEYCTX_TX_WR_CIPHERST_V(x) ((x) << KEYCTX_TX_WR_CIPHERST_S)
-#define KEYCTX_TX_WR_CIPHERST_G(x) \
-	(((x) >> KEYCTX_TX_WR_CIPHERST_S) & KEYCTX_TX_WR_CIPHERST_M)
-
-#define KEYCTX_TX_WR_AUTH_S 14
-#define KEYCTX_TX_WR_AUTH_M 0x1ff
-#define KEYCTX_TX_WR_AUTH_V(x) ((x) << KEYCTX_TX_WR_AUTH_S)
-#define KEYCTX_TX_WR_AUTH_G(x) \
-	(((x) >> KEYCTX_TX_WR_AUTH_S) & KEYCTX_TX_WR_AUTH_M)
-
-#define KEYCTX_TX_WR_AUTHST_S 7
-#define KEYCTX_TX_WR_AUTHST_M 0x7f
-#define KEYCTX_TX_WR_AUTHST_V(x) ((x) << KEYCTX_TX_WR_AUTHST_S)
-#define KEYCTX_TX_WR_AUTHST_G(x) \
-	(((x) >> KEYCTX_TX_WR_AUTHST_S) & KEYCTX_TX_WR_AUTHST_M)
-
-#define KEYCTX_TX_WR_AUTHIN_S 0
-#define KEYCTX_TX_WR_AUTHIN_M 0x7f
-#define KEYCTX_TX_WR_AUTHIN_V(x) ((x) << KEYCTX_TX_WR_AUTHIN_S)
-#define KEYCTX_TX_WR_AUTHIN_G(x) \
-	(((x) >> KEYCTX_TX_WR_AUTHIN_S) & KEYCTX_TX_WR_AUTHIN_M)
-
 #define WQ_RETRY	5
 struct chcr_driver_data {
 	struct list_head act_dev;
@@ -157,42 +109,6 @@ struct uld_ctx {
 	struct chcr_dev dev;
 };
 
-struct sge_opaque_hdr {
-	void *dev;
-	dma_addr_t addr[MAX_SKB_FRAGS + 1];
-};
-
-struct chcr_ipsec_req {
-	struct ulp_txpkt ulptx;
-	struct ulptx_idata sc_imm;
-	struct cpl_tx_sec_pdu sec_cpl;
-	struct _key_ctx key_ctx;
-};
-
-struct chcr_ipsec_wr {
-	struct fw_ulptx_wr wreq;
-	struct chcr_ipsec_req req;
-};
-
-#define ESN_IV_INSERT_OFFSET 12
-struct chcr_ipsec_aadiv {
-	__be32 spi;
-	u8 seq_no[8];
-	u8 iv[8];
-};
-
-struct ipsec_sa_entry {
-	int hmac_ctrl;
-	u16 esn;
-	u16 resv;
-	unsigned int enckey_len;
-	unsigned int kctx_len;
-	unsigned int authsize;
-	__be32 key_ctx_hdr;
-	char salt[MAX_SALT];
-	char key[2 * AES_MAX_KEY_SIZE];
-};
-
 /*
  *      sgl_len - calculates the size of an SGL of the given capacity
  *      @n: the number of SGL entries
@@ -221,18 +137,4 @@ int chcr_uld_rx_handler(void *handle, const __be64 *rsp,
 int chcr_uld_tx_handler(struct sk_buff *skb, struct net_device *dev);
 int chcr_handle_resp(struct crypto_async_request *req, unsigned char *input,
 		     int err);
-int chcr_ipsec_xmit(struct sk_buff *skb, struct net_device *dev);
-void chcr_add_xfrmops(const struct cxgb4_lld_info *lld);
-#ifdef CONFIG_CHELSIO_TLS_DEVICE
-int chcr_ktls_cpl_act_open_rpl(struct adapter *adap, unsigned char *input);
-int chcr_ktls_cpl_set_tcb_rpl(struct adapter *adap, unsigned char *input);
-int chcr_ktls_xmit(struct sk_buff *skb, struct net_device *dev);
-extern int chcr_ktls_dev_add(struct net_device *netdev, struct sock *sk,
-			     enum tls_offload_ctx_dir direction,
-			     struct tls_crypto_info *crypto_info,
-			     u32 start_offload_tcp_sn);
-extern void chcr_ktls_dev_del(struct net_device *netdev,
-			      struct tls_context *tls_ctx,
-			      enum tls_offload_ctx_dir direction);
-#endif
 #endif /* __CHCR_CORE_H__ */

drivers/infiniband/hw/hfi1/ipoib_main.c

@@ -97,41 +97,9 @@ static void hfi1_ipoib_dev_get_stats64(struct net_device *dev,
 				       struct rtnl_link_stats64 *storage)
 {
 	struct hfi1_ipoib_dev_priv *priv = hfi1_ipoib_priv(dev);
-	u64 rx_packets = 0ull;
-	u64 rx_bytes = 0ull;
-	u64 tx_packets = 0ull;
-	u64 tx_bytes = 0ull;
-	int i;
 
 	netdev_stats_to_stats64(storage, &dev->stats);
-
+	dev_fetch_sw_netstats(storage, priv->netstats);
-	for_each_possible_cpu(i) {
-		const struct pcpu_sw_netstats *stats;
-		unsigned int start;
-		u64 trx_packets;
-		u64 trx_bytes;
-		u64 ttx_packets;
-		u64 ttx_bytes;
-
-		stats = per_cpu_ptr(priv->netstats, i);
-		do {
-			start = u64_stats_fetch_begin_irq(&stats->syncp);
-			trx_packets = stats->rx_packets;
-			trx_bytes = stats->rx_bytes;
-			ttx_packets = stats->tx_packets;
-			ttx_bytes = stats->tx_bytes;
-		} while (u64_stats_fetch_retry_irq(&stats->syncp, start));
-
-		rx_packets += trx_packets;
-		rx_bytes += trx_bytes;
-		tx_packets += ttx_packets;
-		tx_bytes += ttx_bytes;
-	}
-
-	storage->rx_packets += rx_packets;
-	storage->rx_bytes += rx_bytes;
-	storage->tx_packets += tx_packets;
-	storage->tx_bytes += tx_bytes;
 }
 
 static const struct net_device_ops hfi1_ipoib_netdev_ops = {

drivers/net/Kconfig

@@ -473,6 +473,10 @@ config NET_SB1000
 
 source "drivers/net/phy/Kconfig"
 
+source "drivers/net/mdio/Kconfig"
+
+source "drivers/net/pcs/Kconfig"
+
 source "drivers/net/plip/Kconfig"
 
 source "drivers/net/ppp/Kconfig"

drivers/net/Makefile

@@ -21,6 +21,8 @@ obj-$(CONFIG_MDIO) += mdio.o
 obj-$(CONFIG_NET) += Space.o loopback.o
 obj-$(CONFIG_NETCONSOLE) += netconsole.o
 obj-y += phy/
+obj-y += mdio/
+obj-y += pcs/
 obj-$(CONFIG_RIONET) += rionet.o
 obj-$(CONFIG_NET_TEAM) += team/
 obj-$(CONFIG_TUN) += tun.o

drivers/net/appletalk/cops.c

@@ -70,6 +70,8 @@ static const char *version =
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
 
+#include <net/Space.h>
+
 #include <asm/io.h>
 #include <asm/dma.h>
 

drivers/net/appletalk/ltpc.c

@@ -229,6 +229,8 @@ static int dma;
 #include <linux/bitops.h>
 #include <linux/gfp.h>
 
+#include <net/Space.h>
+
 #include <asm/dma.h>
 #include <asm/io.h>
 

drivers/net/bareudp.c

@@ -54,7 +54,6 @@ struct bareudp_dev {
 static int bareudp_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
 {
 	struct metadata_dst *tun_dst = NULL;
-	struct pcpu_sw_netstats *stats;
 	struct bareudp_dev *bareudp;
 	unsigned short family;
 	unsigned int len;
@@ -160,13 +159,9 @@ static int bareudp_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
 
 	len = skb->len;
 	err = gro_cells_receive(&bareudp->gro_cells, skb);
-	if (likely(err == NET_RX_SUCCESS)) {
+	if (likely(err == NET_RX_SUCCESS))
-		stats = this_cpu_ptr(bareudp->dev->tstats);
+		dev_sw_netstats_rx_add(bareudp->dev, len);
-		u64_stats_update_begin(&stats->syncp);
+
-		stats->rx_packets++;
-		stats->rx_bytes += len;
-		u64_stats_update_end(&stats->syncp);
-	}
 	return 0;
 drop:
 	/* Consume bad packet */

drivers/net/caif/Kconfig

@@ -20,25 +20,6 @@ config CAIF_TTY
 	  identified as N_CAIF. When this ldisc is opened from user space
 	  it will redirect the TTY's traffic into the CAIF stack.
 
-config CAIF_SPI_SLAVE
-	tristate "CAIF SPI transport driver for slave interface"
-	depends on CAIF && HAS_DMA
-	default n
-	help
-	  The CAIF Link layer SPI Protocol driver for Slave SPI interface.
-	  This driver implements a platform driver to accommodate for a
-	  platform specific SPI device. A sample CAIF SPI Platform device is
-	  provided in <file:Documentation/networking/caif/spi_porting.rst>.
-
-config CAIF_SPI_SYNC
-	bool "Next command and length in start of frame"
-	depends on CAIF_SPI_SLAVE
-	default n
-	help
-	  Putting the next command and length in the start of the frame can
-	  help to synchronize to the next transfer in case of over or under-runs.
-	  This option also needs to be enabled on the modem.
-
 config CAIF_HSI
 	tristate "CAIF HSI transport driver"
 	depends on CAIF

drivers/net/caif/Makefile

@@ -4,10 +4,6 @@ ccflags-$(CONFIG_CAIF_DEBUG) := -DDEBUG
 # Serial interface
 obj-$(CONFIG_CAIF_TTY) += caif_serial.o
 
-# SPI slave physical interfaces module
-cfspi_slave-objs := caif_spi.o caif_spi_slave.o
-obj-$(CONFIG_CAIF_SPI_SLAVE) += cfspi_slave.o
-
 # HSI interface
 obj-$(CONFIG_CAIF_HSI) += caif_hsi.o
 

drivers/net/caif/caif_hsi.c

@@ -458,15 +458,7 @@ static int cfhsi_rx_desc(struct cfhsi_desc *desc, struct cfhsi *cfhsi)
 		skb_reset_mac_header(skb);
 		skb->dev = cfhsi->ndev;
 
-		/*
+		netif_rx_any_context(skb);
-		 * We are in a callback handler and
-		 * unfortunately we don't know what context we're
-		 * running in.
-		 */
-		if (in_interrupt())
-			netif_rx(skb);
-		else
-			netif_rx_ni(skb);
 
 		/* Update network statistics. */
 		cfhsi->ndev->stats.rx_packets++;
@@ -587,14 +579,7 @@ static int cfhsi_rx_pld(struct cfhsi_desc *desc, struct cfhsi *cfhsi)
 		skb_reset_mac_header(skb);
 		skb->dev = cfhsi->ndev;
 
-		/*
+		netif_rx_any_context(skb);
-		 * We're called in callback from HSI
-		 * and don't know the context we're running in.
-		 */
-		if (in_interrupt())
-			netif_rx(skb);
-		else
-			netif_rx_ni(skb);
 
 		/* Update network statistics. */
 		cfhsi->ndev->stats.rx_packets++;

drivers/net/caif/caif_spi.c

@@ -1,874 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) ST-Ericsson AB 2010
- * Author:  Daniel Martensson
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/string.h>
-#include <linux/workqueue.h>
-#include <linux/completion.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/debugfs.h>
-#include <linux/if_arp.h>
-#include <net/caif/caif_layer.h>
-#include <net/caif/caif_spi.h>
-
-#ifndef CONFIG_CAIF_SPI_SYNC
-#define FLAVOR "Flavour: Vanilla.\n"
-#else
-#define FLAVOR "Flavour: Master CMD&LEN at start.\n"
-#endif /* CONFIG_CAIF_SPI_SYNC */
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Daniel Martensson");
-MODULE_DESCRIPTION("CAIF SPI driver");
-
-/* Returns the number of padding bytes for alignment. */
-#define PAD_POW2(x, pow) ((((x)&((pow)-1))==0) ? 0 : (((pow)-((x)&((pow)-1)))))
-
-static bool spi_loop;
-module_param(spi_loop, bool, 0444);
-MODULE_PARM_DESC(spi_loop, "SPI running in loopback mode.");
-
-/* SPI frame alignment. */
-module_param(spi_frm_align, int, 0444);
-MODULE_PARM_DESC(spi_frm_align, "SPI frame alignment.");
-
-/*
- * SPI padding options.
- * Warning: must be a base of 2 (& operation used) and can not be zero !
- */
-module_param(spi_up_head_align, int, 0444);
-MODULE_PARM_DESC(spi_up_head_align, "SPI uplink head alignment.");
-
-module_param(spi_up_tail_align, int, 0444);
-MODULE_PARM_DESC(spi_up_tail_align, "SPI uplink tail alignment.");
-
-module_param(spi_down_head_align, int, 0444);
-MODULE_PARM_DESC(spi_down_head_align, "SPI downlink head alignment.");
-
-module_param(spi_down_tail_align, int, 0444);
-MODULE_PARM_DESC(spi_down_tail_align, "SPI downlink tail alignment.");
-
-#ifdef CONFIG_ARM
-#define BYTE_HEX_FMT "%02X"
-#else
-#define BYTE_HEX_FMT "%02hhX"
-#endif
-
-#define SPI_MAX_PAYLOAD_SIZE 4096
-/*
- * Threshold values for the SPI packet queue. Flowcontrol will be asserted
- * when the number of packets exceeds HIGH_WATER_MARK. It will not be
- * deasserted before the number of packets drops below LOW_WATER_MARK.
- */
-#define LOW_WATER_MARK   100
-#define HIGH_WATER_MARK  (LOW_WATER_MARK*5)
-
-#ifndef CONFIG_HAS_DMA
-
-/*
- * We sometimes use UML for debugging, but it cannot handle
- * dma_alloc_coherent so we have to wrap it.
- */
-static inline void *dma_alloc(struct cfspi *cfspi, dma_addr_t *daddr)
-{
-	return kmalloc(SPI_DMA_BUF_LEN, GFP_KERNEL);
-}
-
-static inline void dma_free(struct cfspi *cfspi, void *cpu_addr,
-		dma_addr_t handle)
-{
-	kfree(cpu_addr);
-}
-
-#else
-
-static inline void *dma_alloc(struct cfspi *cfspi, dma_addr_t *daddr)
-{
-	return dma_alloc_coherent(&cfspi->pdev->dev, SPI_DMA_BUF_LEN, daddr,
-				GFP_KERNEL);
-}
-
-static inline void dma_free(struct cfspi *cfspi, void *cpu_addr,
-		dma_addr_t handle)
-{
-	dma_free_coherent(&cfspi->pdev->dev, SPI_DMA_BUF_LEN, cpu_addr, handle);
-}
-#endif	/* CONFIG_HAS_DMA */
-
-#ifdef CONFIG_DEBUG_FS
-
-#define DEBUGFS_BUF_SIZE	4096
-
-static struct dentry *dbgfs_root;
-
-static inline void driver_debugfs_create(void)
-{
-	dbgfs_root = debugfs_create_dir(cfspi_spi_driver.driver.name, NULL);
-}
-
-static inline void driver_debugfs_remove(void)
-{
-	debugfs_remove(dbgfs_root);
-}
-
-static inline void dev_debugfs_rem(struct cfspi *cfspi)
-{
-	debugfs_remove(cfspi->dbgfs_frame);
-	debugfs_remove(cfspi->dbgfs_state);
-	debugfs_remove(cfspi->dbgfs_dir);
-}
-
-static ssize_t dbgfs_state(struct file *file, char __user *user_buf,
-			   size_t count, loff_t *ppos)
-{
-	char *buf;
-	int len = 0;
-	ssize_t size;
-	struct cfspi *cfspi = file->private_data;
-
-	buf = kzalloc(DEBUGFS_BUF_SIZE, GFP_KERNEL);
-	if (!buf)
-		return 0;
-
-	/* Print out debug information. */
-	len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
-			 "CAIF SPI debug information:\n");
-
-	len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len), FLAVOR);
-
-	len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
-			 "STATE: %d\n", cfspi->dbg_state);
-	len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
-			 "Previous CMD: 0x%x\n", cfspi->pcmd);
-	len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
-			 "Current CMD: 0x%x\n", cfspi->cmd);
-	len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
-			 "Previous TX len: %d\n", cfspi->tx_ppck_len);
-	len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
-			 "Previous RX len: %d\n", cfspi->rx_ppck_len);
-	len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
-			 "Current TX len: %d\n", cfspi->tx_cpck_len);
-	len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
-			 "Current RX len: %d\n", cfspi->rx_cpck_len);
-	len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
-			 "Next TX len: %d\n", cfspi->tx_npck_len);
-	len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
-			 "Next RX len: %d\n", cfspi->rx_npck_len);
-
-	if (len > DEBUGFS_BUF_SIZE)
-		len = DEBUGFS_BUF_SIZE;
-
-	size = simple_read_from_buffer(user_buf, count, ppos, buf, len);
-	kfree(buf);
-
-	return size;
-}
-
-static ssize_t print_frame(char *buf, size_t size, char *frm,
-			   size_t count, size_t cut)
-{
-	int len = 0;
-	int i;
-	for (i = 0; i < count; i++) {
-		len += scnprintf((buf + len), (size - len),
-					"[0x" BYTE_HEX_FMT "]",
-					frm[i]);
-		if ((i == cut) && (count > (cut * 2))) {
-			/* Fast forward. */
-			i = count - cut;
-			len += scnprintf((buf + len), (size - len),
-					 "--- %zu bytes skipped ---\n",
-					 count - (cut * 2));
-		}
-
-		if ((!(i % 10)) && i) {
-			len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
-					 "\n");
-		}
-	}
-	len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len), "\n");
-	return len;
-}
-
-static ssize_t dbgfs_frame(struct file *file, char __user *user_buf,
-			   size_t count, loff_t *ppos)
-{
-	char *buf;
-	int len = 0;
-	ssize_t size;
-	struct cfspi *cfspi;
-
-	cfspi = file->private_data;
-	buf = kzalloc(DEBUGFS_BUF_SIZE, GFP_KERNEL);
-	if (!buf)
-		return 0;
-
-	/* Print out debug information. */
-	len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
-			 "Current frame:\n");
-
-	len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
-			 "Tx data (Len: %d):\n", cfspi->tx_cpck_len);
-
-	len += print_frame((buf + len), (DEBUGFS_BUF_SIZE - len),
-			   cfspi->xfer.va_tx[0],
-			   (cfspi->tx_cpck_len + SPI_CMD_SZ), 100);
-
-	len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
-			 "Rx data (Len: %d):\n", cfspi->rx_cpck_len);
-
-	len += print_frame((buf + len), (DEBUGFS_BUF_SIZE - len),
-			   cfspi->xfer.va_rx,
-			   (cfspi->rx_cpck_len + SPI_CMD_SZ), 100);
-
-	size = simple_read_from_buffer(user_buf, count, ppos, buf, len);
-	kfree(buf);
-
-	return size;
-}
-
-static const struct file_operations dbgfs_state_fops = {
-	.open = simple_open,
-	.read = dbgfs_state,
-	.owner = THIS_MODULE
-};
-
-static const struct file_operations dbgfs_frame_fops = {
-	.open = simple_open,
-	.read = dbgfs_frame,
-	.owner = THIS_MODULE
-};
-
-static inline void dev_debugfs_add(struct cfspi *cfspi)
-{
-	cfspi->dbgfs_dir = debugfs_create_dir(cfspi->pdev->name, dbgfs_root);
-	cfspi->dbgfs_state = debugfs_create_file("state", 0444,
-						 cfspi->dbgfs_dir, cfspi,
-						 &dbgfs_state_fops);
-	cfspi->dbgfs_frame = debugfs_create_file("frame", 0444,
-						 cfspi->dbgfs_dir, cfspi,
-						 &dbgfs_frame_fops);
-}
-
-inline void cfspi_dbg_state(struct cfspi *cfspi, int state)
-{
-	cfspi->dbg_state = state;
-};
-#else
-
-static inline void driver_debugfs_create(void)
-{
-}
-
-static inline void driver_debugfs_remove(void)
-{
-}
-
-static inline void dev_debugfs_add(struct cfspi *cfspi)
-{
-}
-
-static inline void dev_debugfs_rem(struct cfspi *cfspi)
-{
-}
-
-inline void cfspi_dbg_state(struct cfspi *cfspi, int state)
-{
-}
-#endif				/* CONFIG_DEBUG_FS */
-
-static LIST_HEAD(cfspi_list);
-static spinlock_t cfspi_list_lock;
-
-/* SPI uplink head alignment. */
-static ssize_t up_head_align_show(struct device_driver *driver, char *buf)
-{
-	return sprintf(buf, "%d\n", spi_up_head_align);
-}
-
-static DRIVER_ATTR_RO(up_head_align);
-
-/* SPI uplink tail alignment. */
-static ssize_t up_tail_align_show(struct device_driver *driver, char *buf)
-{
-	return sprintf(buf, "%d\n", spi_up_tail_align);
-}
-
-static DRIVER_ATTR_RO(up_tail_align);
-
-/* SPI downlink head alignment. */
-static ssize_t down_head_align_show(struct device_driver *driver, char *buf)
-{
-	return sprintf(buf, "%d\n", spi_down_head_align);
-}
-
-static DRIVER_ATTR_RO(down_head_align);
-
-/* SPI downlink tail alignment. */
-static ssize_t down_tail_align_show(struct device_driver *driver, char *buf)
-{
-	return sprintf(buf, "%d\n", spi_down_tail_align);
-}
-
-static DRIVER_ATTR_RO(down_tail_align);
-
-/* SPI frame alignment. */
-static ssize_t frame_align_show(struct device_driver *driver, char *buf)
-{
-	return sprintf(buf, "%d\n", spi_frm_align);
-}
-
-static DRIVER_ATTR_RO(frame_align);
-
-int cfspi_xmitfrm(struct cfspi *cfspi, u8 *buf, size_t len)
-{
-	u8 *dst = buf;
-	caif_assert(buf);
-
-	if (cfspi->slave && !cfspi->slave_talked)
-		cfspi->slave_talked = true;
-
-	do {
-		struct sk_buff *skb;
-		struct caif_payload_info *info;
-		int spad = 0;
-		int epad;
-
-		skb = skb_dequeue(&cfspi->chead);
-		if (!skb)
-			break;
-
-		/*
-		 * Calculate length of frame including SPI padding.
-		 * The payload position is found in the control buffer.
-		 */
-		info = (struct caif_payload_info *)&skb->cb;
-
-		/*
-		 * Compute head offset i.e. number of bytes to add to
-		 * get the start of the payload aligned.
-		 */
-		if (spi_up_head_align > 1) {
-			spad = 1 + PAD_POW2((info->hdr_len + 1), spi_up_head_align);
-			*dst = (u8)(spad - 1);
-			dst += spad;
-		}
-
-		/* Copy in CAIF frame. */
-		skb_copy_bits(skb, 0, dst, skb->len);
-		dst += skb->len;
-		cfspi->ndev->stats.tx_packets++;
-		cfspi->ndev->stats.tx_bytes += skb->len;
-
-		/*
-		 * Compute tail offset i.e. number of bytes to add to
-		 * get the complete CAIF frame aligned.
-		 */
-		epad = PAD_POW2((skb->len + spad), spi_up_tail_align);
-		dst += epad;
-
-		dev_kfree_skb(skb);
-
-	} while ((dst - buf) < len);
-
-	return dst - buf;
-}
-
-int cfspi_xmitlen(struct cfspi *cfspi)
-{
-	struct sk_buff *skb = NULL;
-	int frm_len = 0;
-	int pkts = 0;
-
-	/*
-	 * Decommit previously committed frames.
-	 * skb_queue_splice_tail(&cfspi->chead,&cfspi->qhead)
-	 */
-	while (skb_peek(&cfspi->chead)) {
-		skb = skb_dequeue_tail(&cfspi->chead);
-		skb_queue_head(&cfspi->qhead, skb);
-	}
-
-	do {
-		struct caif_payload_info *info = NULL;
-		int spad = 0;
-		int epad = 0;
-
-		skb = skb_dequeue(&cfspi->qhead);
-		if (!skb)
-			break;
-
-		/*
-		 * Calculate length of frame including SPI padding.
-		 * The payload position is found in the control buffer.
-		 */
-		info = (struct caif_payload_info *)&skb->cb;
-
-		/*
-		 * Compute head offset i.e. number of bytes to add to
-		 * get the start of the payload aligned.
-		 */
-		if (spi_up_head_align > 1)
-			spad = 1 + PAD_POW2((info->hdr_len + 1), spi_up_head_align);
-
-		/*
-		 * Compute tail offset i.e. number of bytes to add to
-		 * get the complete CAIF frame aligned.
-		 */
-		epad = PAD_POW2((skb->len + spad), spi_up_tail_align);
-
-		if ((skb->len + spad + epad + frm_len) <= CAIF_MAX_SPI_FRAME) {
-			skb_queue_tail(&cfspi->chead, skb);
-			pkts++;
-			frm_len += skb->len + spad + epad;
-		} else {
-			/* Put back packet. */
-			skb_queue_head(&cfspi->qhead, skb);
-			break;
-		}
-	} while (pkts <= CAIF_MAX_SPI_PKTS);
-
-	/*
-	 * Send flow on if previously sent flow off
-	 * and now go below the low water mark
-	 */
-	if (cfspi->flow_off_sent && cfspi->qhead.qlen < cfspi->qd_low_mark &&
-		cfspi->cfdev.flowctrl) {
-		cfspi->flow_off_sent = 0;
-		cfspi->cfdev.flowctrl(cfspi->ndev, 1);
-	}
-
-	return frm_len;
-}
-
-static void cfspi_ss_cb(bool assert, struct cfspi_ifc *ifc)
-{
-	struct cfspi *cfspi = (struct cfspi *)ifc->priv;
-
-	/*
-	 * The slave device is the master on the link. Interrupts before the
-	 * slave has transmitted are considered spurious.
-	 */
-	if (cfspi->slave && !cfspi->slave_talked) {
-		printk(KERN_WARNING "CFSPI: Spurious SS interrupt.\n");
-		return;
-	}
-
-	if (!in_interrupt())
-		spin_lock(&cfspi->lock);
-	if (assert) {
-		set_bit(SPI_SS_ON, &cfspi->state);
-		set_bit(SPI_XFER, &cfspi->state);
-	} else {
-		set_bit(SPI_SS_OFF, &cfspi->state);
-	}
-	if (!in_interrupt())
-		spin_unlock(&cfspi->lock);
-
-	/* Wake up the xfer thread. */
-	if (assert)
-		wake_up_interruptible(&cfspi->wait);
-}
-
-static void cfspi_xfer_done_cb(struct cfspi_ifc *ifc)
-{
-	struct cfspi *cfspi = (struct cfspi *)ifc->priv;
-
-	/* Transfer done, complete work queue */
-	complete(&cfspi->comp);
-}
-
-static netdev_tx_t cfspi_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct cfspi *cfspi = NULL;
-	unsigned long flags;
-	if (!dev)
-		return -EINVAL;
-
-	cfspi = netdev_priv(dev);
-
-	skb_queue_tail(&cfspi->qhead, skb);
-
-	spin_lock_irqsave(&cfspi->lock, flags);
-	if (!test_and_set_bit(SPI_XFER, &cfspi->state)) {
-		/* Wake up xfer thread. */
-		wake_up_interruptible(&cfspi->wait);
-	}
-	spin_unlock_irqrestore(&cfspi->lock, flags);
-
-	/* Send flow off if number of bytes is above high water mark */
-	if (!cfspi->flow_off_sent &&
-		cfspi->qhead.qlen > cfspi->qd_high_mark &&
-		cfspi->cfdev.flowctrl) {
-		cfspi->flow_off_sent = 1;
-		cfspi->cfdev.flowctrl(cfspi->ndev, 0);
-	}
-
-	return NETDEV_TX_OK;
-}
-
-int cfspi_rxfrm(struct cfspi *cfspi, u8 *buf, size_t len)
-{
-	u8 *src = buf;
-
-	caif_assert(buf != NULL);
-
-	do {
-		int res;
-		struct sk_buff *skb = NULL;
-		int spad = 0;
-		int epad = 0;
-		int pkt_len = 0;
-
-		/*
-		 * Compute head offset i.e. number of bytes added to
-		 * get the start of the payload aligned.
-		 */
-		if (spi_down_head_align > 1) {
-			spad = 1 + *src;
-			src += spad;
-		}
-
-		/* Read length of CAIF frame (little endian). */
-		pkt_len = *src;
-		pkt_len |= ((*(src+1)) << 8) & 0xFF00;
-		pkt_len += 2;	/* Add FCS fields. */
-
-		/* Get a suitable caif packet and copy in data. */
-
-		skb = netdev_alloc_skb(cfspi->ndev, pkt_len + 1);
-		caif_assert(skb != NULL);
-
-		skb_put_data(skb, src, pkt_len);
-		src += pkt_len;
-
-		skb->protocol = htons(ETH_P_CAIF);
-		skb_reset_mac_header(skb);
-
-		/*
-		 * Push received packet up the stack.
-		 */
-		if (!spi_loop)
-			res = netif_rx_ni(skb);
-		else
-			res = cfspi_xmit(skb, cfspi->ndev);
-
-		if (!res) {
-			cfspi->ndev->stats.rx_packets++;
-			cfspi->ndev->stats.rx_bytes += pkt_len;
-		} else
-			cfspi->ndev->stats.rx_dropped++;
-
-		/*
-		 * Compute tail offset i.e. number of bytes added to
-		 * get the complete CAIF frame aligned.
-		 */
-		epad = PAD_POW2((pkt_len + spad), spi_down_tail_align);
-		src += epad;
-	} while ((src - buf) < len);
-
-	return src - buf;
-}
-
-static int cfspi_open(struct net_device *dev)
-{
-	netif_wake_queue(dev);
-	return 0;
-}
-
-static int cfspi_close(struct net_device *dev)
-{
-	netif_stop_queue(dev);
-	return 0;
-}
-
-static int cfspi_init(struct net_device *dev)
-{
-	int res = 0;
-	struct cfspi *cfspi = netdev_priv(dev);
-
-	/* Set flow info. */
-	cfspi->flow_off_sent = 0;
-	cfspi->qd_low_mark = LOW_WATER_MARK;
-	cfspi->qd_high_mark = HIGH_WATER_MARK;
-
-	/* Set slave info. */
-	if (!strncmp(cfspi_spi_driver.driver.name, "cfspi_sspi", 10)) {
-		cfspi->slave = true;
-		cfspi->slave_talked = false;
-	} else {
-		cfspi->slave = false;
-		cfspi->slave_talked = false;
-	}
-
-	/* Allocate DMA buffers. */
-	cfspi->xfer.va_tx[0] = dma_alloc(cfspi, &cfspi->xfer.pa_tx[0]);
-	if (!cfspi->xfer.va_tx[0]) {
-		res = -ENODEV;
-		goto err_dma_alloc_tx_0;
-	}
-
-	cfspi->xfer.va_rx = dma_alloc(cfspi, &cfspi->xfer.pa_rx);
-
-	if (!cfspi->xfer.va_rx) {
-		res = -ENODEV;
-		goto err_dma_alloc_rx;
-	}
-
-	/* Initialize the work queue. */
-	INIT_WORK(&cfspi->work, cfspi_xfer);
-
-	/* Initialize spin locks. */
-	spin_lock_init(&cfspi->lock);
-
-	/* Initialize flow control state. */
-	cfspi->flow_stop = false;
-
-	/* Initialize wait queue. */
-	init_waitqueue_head(&cfspi->wait);
-
-	/* Create work thread. */
-	cfspi->wq = create_singlethread_workqueue(dev->name);
-	if (!cfspi->wq) {
-		printk(KERN_WARNING "CFSPI: failed to create work queue.\n");
-		res = -ENODEV;
-		goto err_create_wq;
-	}
-
-	/* Initialize work queue. */
-	init_completion(&cfspi->comp);
-
-	/* Create debugfs entries. */
-	dev_debugfs_add(cfspi);
-
-	/* Set up the ifc. */
-	cfspi->ifc.ss_cb = cfspi_ss_cb;
-	cfspi->ifc.xfer_done_cb = cfspi_xfer_done_cb;
-	cfspi->ifc.priv = cfspi;
-
-	/* Add CAIF SPI device to list. */
-	spin_lock(&cfspi_list_lock);
-	list_add_tail(&cfspi->list, &cfspi_list);
-	spin_unlock(&cfspi_list_lock);
-
-	/* Schedule the work queue. */
-	queue_work(cfspi->wq, &cfspi->work);
-
-	return 0;
-
- err_create_wq:
-	dma_free(cfspi, cfspi->xfer.va_rx, cfspi->xfer.pa_rx);
- err_dma_alloc_rx:
-	dma_free(cfspi, cfspi->xfer.va_tx[0], cfspi->xfer.pa_tx[0]);
- err_dma_alloc_tx_0:
-	return res;
-}
-
-static void cfspi_uninit(struct net_device *dev)
-{
-	struct cfspi *cfspi = netdev_priv(dev);
-
-	/* Remove from list. */
-	spin_lock(&cfspi_list_lock);
-	list_del(&cfspi->list);
-	spin_unlock(&cfspi_list_lock);
-
-	cfspi->ndev = NULL;
-	/* Free DMA buffers. */
-	dma_free(cfspi, cfspi->xfer.va_rx, cfspi->xfer.pa_rx);
-	dma_free(cfspi, cfspi->xfer.va_tx[0], cfspi->xfer.pa_tx[0]);
-	set_bit(SPI_TERMINATE, &cfspi->state);
-	wake_up_interruptible(&cfspi->wait);
-	destroy_workqueue(cfspi->wq);
-	/* Destroy debugfs directory and files. */
-	dev_debugfs_rem(cfspi);
-	return;
-}
-
-static const struct net_device_ops cfspi_ops = {
-	.ndo_open = cfspi_open,
-	.ndo_stop = cfspi_close,
-	.ndo_init = cfspi_init,
-	.ndo_uninit = cfspi_uninit,
-	.ndo_start_xmit = cfspi_xmit
-};
-
-static void cfspi_setup(struct net_device *dev)
-{
-	struct cfspi *cfspi = netdev_priv(dev);
-	dev->features = 0;
-	dev->netdev_ops = &cfspi_ops;
-	dev->type = ARPHRD_CAIF;
-	dev->flags = IFF_NOARP | IFF_POINTOPOINT;
-	dev->priv_flags |= IFF_NO_QUEUE;
-	dev->mtu = SPI_MAX_PAYLOAD_SIZE;
-	dev->needs_free_netdev = true;
-	skb_queue_head_init(&cfspi->qhead);
-	skb_queue_head_init(&cfspi->chead);
-	cfspi->cfdev.link_select = CAIF_LINK_HIGH_BANDW;
-	cfspi->cfdev.use_frag = false;
-	cfspi->cfdev.use_stx = false;
-	cfspi->cfdev.use_fcs = false;
-	cfspi->ndev = dev;
-}
-
-int cfspi_spi_probe(struct platform_device *pdev)
-{
-	struct cfspi *cfspi = NULL;
-	struct net_device *ndev;
-	struct cfspi_dev *dev;
-	int res;
-	dev = (struct cfspi_dev *)pdev->dev.platform_data;
-
-	if (!dev)
-		return -ENODEV;
-
-	ndev = alloc_netdev(sizeof(struct cfspi), "cfspi%d",
-			    NET_NAME_UNKNOWN, cfspi_setup);
-	if (!ndev)
-		return -ENOMEM;
-
-	cfspi = netdev_priv(ndev);
-	netif_stop_queue(ndev);
-	cfspi->ndev = ndev;
-	cfspi->pdev = pdev;
-
-	/* Assign the SPI device. */
-	cfspi->dev = dev;
-	/* Assign the device ifc to this SPI interface. */
-	dev->ifc = &cfspi->ifc;
-
-	/* Register network device. */
-	res = register_netdev(ndev);
-	if (res) {
-		printk(KERN_ERR "CFSPI: Reg. error: %d.\n", res);
-		goto err_net_reg;
-	}
-	return res;
-
- err_net_reg:
-	free_netdev(ndev);
-
-	return res;
-}
-
-int cfspi_spi_remove(struct platform_device *pdev)
-{
-	/* Everything is done in cfspi_uninit(). */
-	return 0;
-}
-
-static void __exit cfspi_exit_module(void)
-{
-	struct list_head *list_node;
-	struct list_head *n;
-	struct cfspi *cfspi = NULL;
-
-	list_for_each_safe(list_node, n, &cfspi_list) {
-		cfspi = list_entry(list_node, struct cfspi, list);
-		unregister_netdev(cfspi->ndev);
-	}
-
-	/* Destroy sysfs files. */
-	driver_remove_file(&cfspi_spi_driver.driver,
-			   &driver_attr_up_head_align);
-	driver_remove_file(&cfspi_spi_driver.driver,
-			   &driver_attr_up_tail_align);
-	driver_remove_file(&cfspi_spi_driver.driver,
-			   &driver_attr_down_head_align);
-	driver_remove_file(&cfspi_spi_driver.driver,
-			   &driver_attr_down_tail_align);
-	driver_remove_file(&cfspi_spi_driver.driver, &driver_attr_frame_align);
-	/* Unregister platform driver. */
-	platform_driver_unregister(&cfspi_spi_driver);
-	/* Destroy debugfs root directory. */
-	driver_debugfs_remove();
-}
-
-static int __init cfspi_init_module(void)
-{
-	int result;
-
-	/* Initialize spin lock. */
-	spin_lock_init(&cfspi_list_lock);
-
-	/* Register platform driver. */
-	result = platform_driver_register(&cfspi_spi_driver);
-	if (result) {
-		printk(KERN_ERR "Could not register platform SPI driver.\n");
-		goto err_dev_register;
-	}
-
-	/* Create sysfs files. */
-	result =
-	    driver_create_file(&cfspi_spi_driver.driver,
-			       &driver_attr_up_head_align);
-	if (result) {
-		printk(KERN_ERR "Sysfs creation failed 1.\n");
-		goto err_create_up_head_align;
-	}
-
-	result =
-	    driver_create_file(&cfspi_spi_driver.driver,
-			       &driver_attr_up_tail_align);
-	if (result) {
-		printk(KERN_ERR "Sysfs creation failed 2.\n");
-		goto err_create_up_tail_align;
-	}
-
-	result =
-	    driver_create_file(&cfspi_spi_driver.driver,
-			       &driver_attr_down_head_align);
-	if (result) {
-		printk(KERN_ERR "Sysfs creation failed 3.\n");
-		goto err_create_down_head_align;
-	}
-
-	result =
-	    driver_create_file(&cfspi_spi_driver.driver,
-			       &driver_attr_down_tail_align);
-	if (result) {
-		printk(KERN_ERR "Sysfs creation failed 4.\n");
-		goto err_create_down_tail_align;
-	}
-
-	result =
-	    driver_create_file(&cfspi_spi_driver.driver,
-			       &driver_attr_frame_align);
-	if (result) {
-		printk(KERN_ERR "Sysfs creation failed 5.\n");
-		goto err_create_frame_align;
-	}
-	driver_debugfs_create();
-	return result;
-
- err_create_frame_align:
-	driver_remove_file(&cfspi_spi_driver.driver,
-			   &driver_attr_down_tail_align);
- err_create_down_tail_align:
-	driver_remove_file(&cfspi_spi_driver.driver,
-			   &driver_attr_down_head_align);
- err_create_down_head_align:
-	driver_remove_file(&cfspi_spi_driver.driver,
-			   &driver_attr_up_tail_align);
- err_create_up_tail_align:
-	driver_remove_file(&cfspi_spi_driver.driver,
-			   &driver_attr_up_head_align);
- err_create_up_head_align:
-	platform_driver_unregister(&cfspi_spi_driver);
- err_dev_register:
-	return result;
-}
-
-module_init(cfspi_init_module);
-module_exit(cfspi_exit_module);

drivers/net/caif/caif_spi_slave.c

@@ -1,254 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) ST-Ericsson AB 2010
- * Author:  Daniel Martensson
- */
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/string.h>
-#include <linux/semaphore.h>
-#include <linux/workqueue.h>
-#include <linux/completion.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/debugfs.h>
-#include <net/caif/caif_spi.h>
-
-#ifndef CONFIG_CAIF_SPI_SYNC
-#define SPI_DATA_POS 0
-static inline int forward_to_spi_cmd(struct cfspi *cfspi)
-{
-	return cfspi->rx_cpck_len;
-}
-#else
-#define SPI_DATA_POS SPI_CMD_SZ
-static inline int forward_to_spi_cmd(struct cfspi *cfspi)
-{
-	return 0;
-}
-#endif
-
-int spi_frm_align = 2;
-
-/*
- * SPI padding options.
- * Warning: must be a base of 2 (& operation used) and can not be zero !
- */
-int spi_up_head_align   = 1 << 1;
-int spi_up_tail_align   = 1 << 0;
-int spi_down_head_align = 1 << 2;
-int spi_down_tail_align = 1 << 1;
-
-#ifdef CONFIG_DEBUG_FS
-static inline void debugfs_store_prev(struct cfspi *cfspi)
-{
-	/* Store previous command for debugging reasons.*/
-	cfspi->pcmd = cfspi->cmd;
-	/* Store previous transfer. */
-	cfspi->tx_ppck_len = cfspi->tx_cpck_len;
-	cfspi->rx_ppck_len = cfspi->rx_cpck_len;
-}
-#else
-static inline void debugfs_store_prev(struct cfspi *cfspi)
-{
-}
-#endif
-
-void cfspi_xfer(struct work_struct *work)
-{
-	struct cfspi *cfspi;
-	u8 *ptr = NULL;
-	unsigned long flags;
-	int ret;
-	cfspi = container_of(work, struct cfspi, work);
-
-	/* Initialize state. */
-	cfspi->cmd = SPI_CMD_EOT;
-
-	for (;;) {
-
-		cfspi_dbg_state(cfspi, CFSPI_STATE_WAITING);
-
-		/* Wait for master talk or transmit event. */
-		wait_event_interruptible(cfspi->wait,
-				 test_bit(SPI_XFER, &cfspi->state) ||
-				 test_bit(SPI_TERMINATE, &cfspi->state));
-
-		if (test_bit(SPI_TERMINATE, &cfspi->state))
-			return;
-
-#if CFSPI_DBG_PREFILL
-		/* Prefill buffers for easier debugging. */
-		memset(cfspi->xfer.va_tx, 0xFF, SPI_DMA_BUF_LEN);
-		memset(cfspi->xfer.va_rx, 0xFF, SPI_DMA_BUF_LEN);
-#endif	/* CFSPI_DBG_PREFILL */
-
-		cfspi_dbg_state(cfspi, CFSPI_STATE_AWAKE);
-
-	/* Check whether we have a committed frame. */
-		if (cfspi->tx_cpck_len) {
-			int len;
-
-			cfspi_dbg_state(cfspi, CFSPI_STATE_FETCH_PKT);
-
-			/* Copy committed SPI frames after the SPI indication. */
-			ptr = (u8 *) cfspi->xfer.va_tx;
-			ptr += SPI_IND_SZ;
-			len = cfspi_xmitfrm(cfspi, ptr, cfspi->tx_cpck_len);
-			WARN_ON(len != cfspi->tx_cpck_len);
-	}
-
-		cfspi_dbg_state(cfspi, CFSPI_STATE_GET_NEXT);
-
-		/* Get length of next frame to commit. */
-		cfspi->tx_npck_len = cfspi_xmitlen(cfspi);
-
-		WARN_ON(cfspi->tx_npck_len > SPI_DMA_BUF_LEN);
-
-		/*
-		 * Add indication and length at the beginning of the frame,
-		 * using little endian.
-		 */
-		ptr = (u8 *) cfspi->xfer.va_tx;
-		*ptr++ = SPI_CMD_IND;
-		*ptr++ = (SPI_CMD_IND  & 0xFF00) >> 8;
-		*ptr++ = cfspi->tx_npck_len & 0x00FF;
-		*ptr++ = (cfspi->tx_npck_len & 0xFF00) >> 8;
-
-		/* Calculate length of DMAs. */
-		cfspi->xfer.tx_dma_len = cfspi->tx_cpck_len + SPI_IND_SZ;
-		cfspi->xfer.rx_dma_len = cfspi->rx_cpck_len + SPI_CMD_SZ;
-
-		/* Add SPI TX frame alignment padding, if necessary. */
-		if (cfspi->tx_cpck_len &&
-			(cfspi->xfer.tx_dma_len % spi_frm_align)) {
-
-			cfspi->xfer.tx_dma_len += spi_frm_align -
-			    (cfspi->xfer.tx_dma_len % spi_frm_align);
-		}
-
-		/* Add SPI RX frame alignment padding, if necessary. */
-		if (cfspi->rx_cpck_len &&
-			(cfspi->xfer.rx_dma_len % spi_frm_align)) {
-
-			cfspi->xfer.rx_dma_len += spi_frm_align -
-			    (cfspi->xfer.rx_dma_len % spi_frm_align);
-		}
-
-		cfspi_dbg_state(cfspi, CFSPI_STATE_INIT_XFER);
-
-		/* Start transfer. */
-		ret = cfspi->dev->init_xfer(&cfspi->xfer, cfspi->dev);
-		WARN_ON(ret);
-
-		cfspi_dbg_state(cfspi, CFSPI_STATE_WAIT_ACTIVE);
-
-		/*
-		 * TODO: We might be able to make an assumption if this is the
-		 * first loop. Make sure that minimum toggle time is respected.
-		 */
-		udelay(MIN_TRANSITION_TIME_USEC);
-
-		cfspi_dbg_state(cfspi, CFSPI_STATE_SIG_ACTIVE);
-
-		/* Signal that we are ready to receive data. */
-		cfspi->dev->sig_xfer(true, cfspi->dev);
-
-		cfspi_dbg_state(cfspi, CFSPI_STATE_WAIT_XFER_DONE);
-
-		/* Wait for transfer completion. */
-		wait_for_completion(&cfspi->comp);
-
-		cfspi_dbg_state(cfspi, CFSPI_STATE_XFER_DONE);
-
-		if (cfspi->cmd == SPI_CMD_EOT) {
-			/*
-			 * Clear the master talk bit. A xfer is always at
-			 *  least two bursts.
-			 */
-			clear_bit(SPI_SS_ON, &cfspi->state);
-		}
-
-		cfspi_dbg_state(cfspi, CFSPI_STATE_WAIT_INACTIVE);
-
-		/* Make sure that the minimum toggle time is respected. */
-		if (SPI_XFER_TIME_USEC(cfspi->xfer.tx_dma_len,
-					cfspi->dev->clk_mhz) <
-			MIN_TRANSITION_TIME_USEC) {
-
-			udelay(MIN_TRANSITION_TIME_USEC -
-				SPI_XFER_TIME_USEC
-				(cfspi->xfer.tx_dma_len, cfspi->dev->clk_mhz));
-		}
-
-		cfspi_dbg_state(cfspi, CFSPI_STATE_SIG_INACTIVE);
-
-		/* De-assert transfer signal. */
-		cfspi->dev->sig_xfer(false, cfspi->dev);
-
-		/* Check whether we received a CAIF packet. */
-		if (cfspi->rx_cpck_len) {
-			int len;
-
-			cfspi_dbg_state(cfspi, CFSPI_STATE_DELIVER_PKT);
-
-			/* Parse SPI frame. */
-			ptr = ((u8 *)(cfspi->xfer.va_rx + SPI_DATA_POS));
-
-			len = cfspi_rxfrm(cfspi, ptr, cfspi->rx_cpck_len);
-			WARN_ON(len != cfspi->rx_cpck_len);
-		}
-
-		/* Check the next SPI command and length. */
-		ptr = (u8 *) cfspi->xfer.va_rx;
-
-		ptr += forward_to_spi_cmd(cfspi);
-
-		cfspi->cmd = *ptr++;
-		cfspi->cmd |= ((*ptr++) << 8) & 0xFF00;
-		cfspi->rx_npck_len = *ptr++;
-		cfspi->rx_npck_len |= ((*ptr++) << 8) & 0xFF00;
-
-		WARN_ON(cfspi->rx_npck_len > SPI_DMA_BUF_LEN);
-		WARN_ON(cfspi->cmd > SPI_CMD_EOT);
-
-		debugfs_store_prev(cfspi);
-
-		/* Check whether the master issued an EOT command. */
-		if (cfspi->cmd == SPI_CMD_EOT) {
-			/* Reset state. */
-			cfspi->tx_cpck_len = 0;
-			cfspi->rx_cpck_len = 0;
-		} else {
-			/* Update state. */
-			cfspi->tx_cpck_len = cfspi->tx_npck_len;
-			cfspi->rx_cpck_len = cfspi->rx_npck_len;
-		}
-
-		/*
-		 * Check whether we need to clear the xfer bit.
-		 * Spin lock needed for packet insertion.
-		 * Test and clear of different bits
-		 * are not supported.
-		 */
-		spin_lock_irqsave(&cfspi->lock, flags);
-		if (cfspi->cmd == SPI_CMD_EOT && !cfspi_xmitlen(cfspi)
-			&& !test_bit(SPI_SS_ON, &cfspi->state))
-			clear_bit(SPI_XFER, &cfspi->state);
-
-		spin_unlock_irqrestore(&cfspi->lock, flags);
-	}
-}
-
-struct platform_driver cfspi_spi_driver = {
-	.probe = cfspi_spi_probe,
-	.remove = cfspi_spi_remove,
-	.driver = {
-		   .name = "cfspi_sspi",
-		   .owner = THIS_MODULE,
-		   },
-};

drivers/net/caif/caif_virtio.c

@@ -652,7 +652,7 @@ static int cfv_probe(struct virtio_device *vdev)
 	const char *cfv_netdev_name = "cfvrt";
 	struct net_device *netdev;
 	struct cfv_info *cfv;
-	int err = -EINVAL;
+	int err;
 
 	netdev = alloc_netdev(sizeof(struct cfv_info), cfv_netdev_name,
 			      NET_NAME_UNKNOWN, cfv_netdev_setup);

drivers/net/can/Kconfig

@@ -41,8 +41,8 @@ config CAN_SLCAN
 	  www.canusb.com / www.can232.com / www.mictronics.de / www.canhack.de
 
 	  Userspace tools to attach the SLCAN line discipline (slcan_attach,
-	  slcand) can be found in the can-utils at the SocketCAN SVN, see
+	  slcand) can be found in the can-utils at the linux-can project, see
-	  http://developer.berlios.de/projects/socketcan for details.
+	  https://github.com/linux-can/can-utils for details.
 
 	  The slcan driver supports up to 10 CAN netdevices by default which
 	  can be changed by the 'maxdev=xx' module option. This driver can

drivers/net/can/at91_can.c

@@ -643,7 +643,7 @@ static void at91_read_msg(struct net_device *dev, unsigned int mb)
  *
  * The first message goes into mb nr. 1 and issues an interrupt. All
  * rx ints are disabled in the interrupt handler and a napi poll is
- * scheduled. We read the mailbox, but do _not_ reenable the mb (to
+ * scheduled. We read the mailbox, but do _not_ re-enable the mb (to
  * receive another message).
  *
  *    lower mbxs      upper
@@ -661,13 +661,13 @@ static void at91_read_msg(struct net_device *dev, unsigned int mb)
  *
  * The variable priv->rx_next points to the next mailbox to read a
  * message from. As long we're in the lower mailboxes we just read the
- * mailbox but not reenable it.
+ * mailbox but not re-enable it.
  *
- * With completion of the last of the lower mailboxes, we reenable the
+ * With completion of the last of the lower mailboxes, we re-enable the
  * whole first group, but continue to look for filled mailboxes in the
  * upper mailboxes. Imagine the second group like overflow mailboxes,
  * which takes CAN messages if the lower goup is full. While in the
- * upper group we reenable the mailbox right after reading it. Giving
+ * upper group we re-enable the mailbox right after reading it. Giving
  * the chip more room to store messages.
  *
  * After finishing we look again in the lower group if we've still

drivers/net/can/c_can/c_can.c

@@ -356,15 +356,6 @@ static void c_can_setup_tx_object(struct net_device *dev, int iface,
 	}
 }
 
-static inline void c_can_activate_all_lower_rx_msg_obj(struct net_device *dev,
-						       int iface)
-{
-	int i;
-
-	for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_MSG_RX_LOW_LAST; i++)
-		c_can_object_get(dev, iface, i, IF_COMM_CLR_NEWDAT);
-}
-
 static int c_can_handle_lost_msg_obj(struct net_device *dev,
 				     int iface, int objno, u32 ctrl)
 {

drivers/net/can/c_can/c_can.h

@@ -81,7 +81,7 @@ enum reg {
 	C_CAN_FUNCTION_REG,
 };
 
-static const u16 reg_map_c_can[] = {
+static const u16 __maybe_unused reg_map_c_can[] = {
 	[C_CAN_CTRL_REG]	= 0x00,
 	[C_CAN_STS_REG]		= 0x02,
 	[C_CAN_ERR_CNT_REG]	= 0x04,
@@ -121,7 +121,7 @@ static const u16 reg_map_c_can[] = {
 	[C_CAN_MSGVAL2_REG]	= 0xB2,
 };
 
-static const u16 reg_map_d_can[] = {
+static const u16 __maybe_unused reg_map_d_can[] = {
 	[C_CAN_CTRL_REG]	= 0x00,
 	[C_CAN_CTRL_EX_REG]	= 0x02,
 	[C_CAN_STS_REG]		= 0x04,

drivers/net/can/cc770/cc770.c

@@ -538,7 +538,7 @@ static int cc770_err(struct net_device *dev, u8 status)
 			priv->can.can_stats.error_warning++;
 		}
 	} else {
-		/* Back to error avtive */
+		/* Back to error active */
 		cf->can_id |= CAN_ERR_PROT;
 		cf->data[2] = CAN_ERR_PROT_ACTIVE;
 		priv->can.state = CAN_STATE_ERROR_ACTIVE;

drivers/net/can/cc770/cc770.h

@@ -184,7 +184,7 @@ struct cc770_priv {
 	u8 control_normal_mode;	/* Control register for normal mode */
 	u8 cpu_interface;	/* CPU interface register */
 	u8 clkout;		/* Clock out register */
-	u8 bus_config;		/* Bus conffiguration register */
+	u8 bus_config;		/* Bus configuration register */
 
 	struct sk_buff *tx_skb;
 };