From c7c71066c27f2bafb2ce3b10c407c0285f56acfa Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 21 Aug 2013 22:07:20 +0200 Subject: [PATCH 01/61] mac80211: add ieee80211_iterate_active_interfaces_rtnl() If it is needed to disconnect multiple virtual interfaces after (WoWLAN-) suspend, the most obvious approach would be to iterate all interfaces by calling ieee80211_iterate_active_interfaces() and then call ieee80211_resume_disconnect() for each one. This is what the iwlmvm driver does. Unfortunately, this causes a locking dependency from mac80211's iflist_mtx to the key_mtx. This is problematic as the former is intentionally never held while calling any driver operation to allow drivers to iterate with their own locks held. The key_mtx is held while installing a key into the driver though, so this new lock dependency means drivers implementing the logic above can no longer hold their own lock while iterating. To fix this, add a new ieee80211_iterate_active_interfaces_rtnl() function that iterates while the RTNL is already held. This is true during suspend/resume, so that then the locking dependency isn't introduced. While at it, also refactor the various interface iterators and keep only a single implementation called by the various cases. Signed-off-by: Johannes Berg --- include/net/mac80211.h | 19 +++++++++ net/mac80211/util.c | 97 ++++++++++++++++++++---------------------- 2 files changed, 66 insertions(+), 50 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index cc6035f1a2f1..3411c59b636b 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3919,6 +3919,25 @@ void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *hw, struct ieee80211_vif *vif), void *data); +/** + * ieee80211_iterate_active_interfaces_rtnl - iterate active interfaces + * + * This function iterates over the interfaces associated with a given + * hardware that are currently active and calls the callback for them. + * This version can only be used while holding the RTNL. + * + * @hw: the hardware struct of which the interfaces should be iterated over + * @iter_flags: iteration flags, see &enum ieee80211_interface_iteration_flags + * @iterator: the iterator function to call, cannot sleep + * @data: first argument of the iterator function + */ +void ieee80211_iterate_active_interfaces_rtnl(struct ieee80211_hw *hw, + u32 iter_flags, + void (*iterator)(void *data, + u8 *mac, + struct ieee80211_vif *vif), + void *data); + /** * ieee80211_queue_work - add work onto the mac80211 workqueue * diff --git a/net/mac80211/util.c b/net/mac80211/util.c index e1b34a18b243..75a16853fb45 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -567,58 +567,14 @@ void ieee80211_flush_queues(struct ieee80211_local *local, IEEE80211_QUEUE_STOP_REASON_FLUSH); } -void ieee80211_iterate_active_interfaces( - struct ieee80211_hw *hw, u32 iter_flags, - void (*iterator)(void *data, u8 *mac, - struct ieee80211_vif *vif), - void *data) +static void __iterate_active_interfaces(struct ieee80211_local *local, + u32 iter_flags, + void (*iterator)(void *data, u8 *mac, + struct ieee80211_vif *vif), + void *data) { - struct ieee80211_local *local = hw_to_local(hw); struct ieee80211_sub_if_data *sdata; - mutex_lock(&local->iflist_mtx); - - list_for_each_entry(sdata, &local->interfaces, list) { - switch (sdata->vif.type) { - case NL80211_IFTYPE_MONITOR: - if (!(sdata->u.mntr_flags & MONITOR_FLAG_ACTIVE)) - continue; - break; - case NL80211_IFTYPE_AP_VLAN: - continue; - default: - break; - } - if (!(iter_flags & IEEE80211_IFACE_ITER_RESUME_ALL) && - !(sdata->flags & IEEE80211_SDATA_IN_DRIVER)) - continue; - if (ieee80211_sdata_running(sdata)) - iterator(data, sdata->vif.addr, - &sdata->vif); - } - - sdata = rcu_dereference_protected(local->monitor_sdata, - lockdep_is_held(&local->iflist_mtx)); - if (sdata && - (iter_flags & IEEE80211_IFACE_ITER_RESUME_ALL || - sdata->flags & IEEE80211_SDATA_IN_DRIVER)) - iterator(data, sdata->vif.addr, &sdata->vif); - - mutex_unlock(&local->iflist_mtx); -} -EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces); - -void ieee80211_iterate_active_interfaces_atomic( - struct ieee80211_hw *hw, u32 iter_flags, - void (*iterator)(void *data, u8 *mac, - struct ieee80211_vif *vif), - void *data) -{ - struct ieee80211_local *local = hw_to_local(hw); - struct ieee80211_sub_if_data *sdata; - - rcu_read_lock(); - list_for_each_entry_rcu(sdata, &local->interfaces, list) { switch (sdata->vif.type) { case NL80211_IFTYPE_MONITOR: @@ -638,16 +594,57 @@ void ieee80211_iterate_active_interfaces_atomic( &sdata->vif); } - sdata = rcu_dereference(local->monitor_sdata); + sdata = rcu_dereference_check(local->monitor_sdata, + lockdep_is_held(&local->iflist_mtx) || + lockdep_rtnl_is_held()); if (sdata && (iter_flags & IEEE80211_IFACE_ITER_RESUME_ALL || sdata->flags & IEEE80211_SDATA_IN_DRIVER)) iterator(data, sdata->vif.addr, &sdata->vif); +} +void ieee80211_iterate_active_interfaces( + struct ieee80211_hw *hw, u32 iter_flags, + void (*iterator)(void *data, u8 *mac, + struct ieee80211_vif *vif), + void *data) +{ + struct ieee80211_local *local = hw_to_local(hw); + + mutex_lock(&local->iflist_mtx); + __iterate_active_interfaces(local, iter_flags, iterator, data); + mutex_unlock(&local->iflist_mtx); +} +EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces); + +void ieee80211_iterate_active_interfaces_atomic( + struct ieee80211_hw *hw, u32 iter_flags, + void (*iterator)(void *data, u8 *mac, + struct ieee80211_vif *vif), + void *data) +{ + struct ieee80211_local *local = hw_to_local(hw); + + rcu_read_lock(); + __iterate_active_interfaces(local, iter_flags, iterator, data); rcu_read_unlock(); } EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces_atomic); +void ieee80211_iterate_active_interfaces_rtnl( + struct ieee80211_hw *hw, u32 iter_flags, + void (*iterator)(void *data, u8 *mac, + struct ieee80211_vif *vif), + void *data) +{ + struct ieee80211_local *local = hw_to_local(hw); + + ASSERT_RTNL(); + + __iterate_active_interfaces(local, iter_flags, iterator, data); +} +EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces_rtnl); + /* * Nothing should have been stuffed into the workqueue during * the suspend->resume cycle. If this WARN is seen then there From c5dc164df6187e845f1a7c0542f5106c74ff5a92 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 28 Aug 2013 19:03:36 +0200 Subject: [PATCH 02/61] mac80211: use ERR_CAST() No need for ERR_PTR(PTR_ERR()) since there's ERR_CAST, use it. Reported-by: Fengguang Wu Signed-off-by: Johannes Berg --- net/mac80211/key.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/key.c b/net/mac80211/key.c index 620677e897bd..3e51dd7d98b3 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -879,7 +879,7 @@ ieee80211_gtk_rekey_add(struct ieee80211_vif *vif, keyconf->keylen, keyconf->key, 0, NULL); if (IS_ERR(key)) - return ERR_PTR(PTR_ERR(key)); + return ERR_CAST(key); if (sdata->u.mgd.mfp != IEEE80211_MFP_DISABLED) key->conf.flags |= IEEE80211_KEY_FLAG_RX_MGMT; From a6ececf4ee24495ecf74672152e28c31cc208df3 Mon Sep 17 00:00:00 2001 From: Sergey Ryazanov Date: Fri, 30 Aug 2013 01:35:09 +0400 Subject: [PATCH 03/61] mac80211: Remove superfluous is_multicast_ether_addr() call Remove superfluous call and use locally stored previous result. Signed-off-by: Sergey Ryazanov Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 3456c0486b48..102ce8adf2d1 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1981,7 +1981,7 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, * EAPOL frames from the local station. */ if (unlikely(!ieee80211_vif_is_mesh(&sdata->vif) && - !is_multicast_ether_addr(hdr.addr1) && !authorized && + !multicast && !authorized && (cpu_to_be16(ethertype) != sdata->control_port_protocol || !ether_addr_equal(sdata->vif.addr, skb->data + ETH_ALEN)))) { #ifdef CONFIG_MAC80211_VERBOSE_DEBUG From 392b9ffb05b62fe38aa813b924d160ab663cec8d Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 27 Aug 2013 11:36:35 +0200 Subject: [PATCH 04/61] mac80211: change beacon/connection polling Since when we detect beacon lost we do active AP probing (using nullfunc frame or probe request) there is no need to have beacon polling. Flags IEEE80211_STA_BEACON_POLL seems to be used just for historical reasons. Change also make that after we start connection poll due to beacon loss, next received beacon will abort the poll. Signed-off-by: Stanislaw Gruszka Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 1 - net/mac80211/mlme.c | 38 +++++++++----------------------------- net/mac80211/scan.c | 3 +-- 3 files changed, 10 insertions(+), 32 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index b6186517ec56..d353c6462d0f 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -322,7 +322,6 @@ struct ieee80211_roc_work { /* flags used in struct ieee80211_if_managed.flags */ enum ieee80211_sta_flags { - IEEE80211_STA_BEACON_POLL = BIT(0), IEEE80211_STA_CONNECTION_POLL = BIT(1), IEEE80211_STA_CONTROL_PORT = BIT(2), IEEE80211_STA_DISABLE_HT = BIT(4), diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 86e4ad56b573..e396a2a97319 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -893,8 +893,7 @@ void ieee80211_send_nullfunc(struct ieee80211_local *local, if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; - if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL | - IEEE80211_STA_CONNECTION_POLL)) + if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE; ieee80211_tx_skb(sdata, skb); @@ -1374,8 +1373,7 @@ static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata) if (!mgd->associated) return false; - if (mgd->flags & (IEEE80211_STA_BEACON_POLL | - IEEE80211_STA_CONNECTION_POLL)) + if (mgd->flags & IEEE80211_STA_CONNECTION_POLL) return false; if (!mgd->have_beacon) @@ -1691,8 +1689,7 @@ static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata) { lockdep_assert_held(&sdata->local->mtx); - sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL | - IEEE80211_STA_BEACON_POLL); + sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL; ieee80211_run_deferred_scan(sdata->local); } @@ -1954,11 +1951,8 @@ static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata) struct ieee80211_local *local = sdata->local; mutex_lock(&local->mtx); - if (!(ifmgd->flags & (IEEE80211_STA_BEACON_POLL | - IEEE80211_STA_CONNECTION_POLL))) { - mutex_unlock(&local->mtx); - return; - } + if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)) + goto out; __ieee80211_stop_poll(sdata); @@ -2094,15 +2088,9 @@ static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata, * because otherwise we would reset the timer every time and * never check whether we received a probe response! */ - if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL | - IEEE80211_STA_CONNECTION_POLL)) + if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) already = true; - if (beacon) - ifmgd->flags |= IEEE80211_STA_BEACON_POLL; - else - ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL; - mutex_unlock(&sdata->local->mtx); if (already) @@ -3061,17 +3049,10 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, } } - if (ifmgd->flags & IEEE80211_STA_BEACON_POLL) { + if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) { mlme_dbg_ratelimited(sdata, "cancelling AP probe due to a received beacon\n"); - mutex_lock(&local->mtx); - ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL; - ieee80211_run_deferred_scan(local); - mutex_unlock(&local->mtx); - - mutex_lock(&local->iflist_mtx); - ieee80211_recalc_ps(local, -1); - mutex_unlock(&local->iflist_mtx); + ieee80211_reset_ap_probe(sdata); } /* @@ -3543,8 +3524,7 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started) run_again(sdata, ifmgd->assoc_data->timeout); - if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL | - IEEE80211_STA_CONNECTION_POLL) && + if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL && ifmgd->associated) { u8 bssid[ETH_ALEN]; int max_tries; diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 08afe74b98f4..ecb57b0bf74a 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -391,8 +391,7 @@ static bool ieee80211_can_scan(struct ieee80211_local *local, return false; if (sdata->vif.type == NL80211_IFTYPE_STATION && - sdata->u.mgd.flags & (IEEE80211_STA_BEACON_POLL | - IEEE80211_STA_CONNECTION_POLL)) + sdata->u.mgd.flags & IEEE80211_STA_CONNECTION_POLL) return false; return true; From 45966aebad40dbecb23ee828a8c78870380f5811 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Tue, 27 Aug 2013 16:59:46 +0200 Subject: [PATCH 05/61] mac80211: add fixed_rate management to minstrel rc Add the capability to use a fixed modulation rate to minstrel rate controller Signed-off-by: Lorenzo Bianconi Acked-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/rc80211_minstrel.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c index 8b5f7ef7c0c9..7fa1b36e6202 100644 --- a/net/mac80211/rc80211_minstrel.c +++ b/net/mac80211/rc80211_minstrel.c @@ -203,6 +203,15 @@ minstrel_update_stats(struct minstrel_priv *mp, struct minstrel_sta_info *mi) memcpy(mi->max_tp_rate, tmp_tp_rate, sizeof(mi->max_tp_rate)); mi->max_prob_rate = tmp_prob_rate; +#ifdef CONFIG_MAC80211_DEBUGFS + /* use fixed index if set */ + if (mp->fixed_rate_idx != -1) { + mi->max_tp_rate[0] = mp->fixed_rate_idx; + mi->max_tp_rate[1] = mp->fixed_rate_idx; + mi->max_prob_rate = mp->fixed_rate_idx; + } +#endif + /* Reset update timer */ mi->stats_update = jiffies; @@ -310,6 +319,11 @@ minstrel_get_rate(void *priv, struct ieee80211_sta *sta, /* increase sum packet counter */ mi->packet_count++; +#ifdef CONFIG_MAC80211_DEBUGFS + if (mp->fixed_rate_idx != -1) + return; +#endif + delta = (mi->packet_count * sampling_ratio / 100) - (mi->sample_count + mi->sample_deferred / 2); From 37feb7e2fb5eea361495f529f2a150ea3a34dd41 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Tue, 27 Aug 2013 16:59:47 +0200 Subject: [PATCH 06/61] mac80211: do not override fixed_rate_idx in minstrel_ht_update_stats Do not override max_tp_rate, max_tp_rate2 and max_prob_rate configured according to fixed_rate in minstrel_ht_update_stats throughput computation Signed-off-by: Lorenzo Bianconi Acked-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/rc80211_minstrel_ht.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 7c323f27ba23..5d60779a0c1b 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -365,6 +365,14 @@ minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) } } +#ifdef CONFIG_MAC80211_DEBUGFS + /* use fixed index if set */ + if (mp->fixed_rate_idx != -1) { + mi->max_tp_rate = mp->fixed_rate_idx; + mi->max_tp_rate2 = mp->fixed_rate_idx; + mi->max_prob_rate = mp->fixed_rate_idx; + } +#endif mi->stats_update = jiffies; } @@ -774,6 +782,11 @@ minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, info->flags |= mi->tx_flags; minstrel_ht_check_cck_shortpreamble(mp, mi, txrc->short_preamble); +#ifdef CONFIG_MAC80211_DEBUGFS + if (mp->fixed_rate_idx != -1) + return; +#endif + /* Don't use EAPOL frames for sampling on non-mrr hw */ if (mp->hw->max_rates == 1 && (info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO)) @@ -781,16 +794,6 @@ minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, else sample_idx = minstrel_get_sample_rate(mp, mi); -#ifdef CONFIG_MAC80211_DEBUGFS - /* use fixed index if set */ - if (mp->fixed_rate_idx != -1) { - mi->max_tp_rate = mp->fixed_rate_idx; - mi->max_tp_rate2 = mp->fixed_rate_idx; - mi->max_prob_rate = mp->fixed_rate_idx; - sample_idx = -1; - } -#endif - mi->total_packets++; /* wraparound */ From 774f073461dbee0decee7524d9b930a98a3dc30c Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 28 Aug 2013 13:41:28 +0200 Subject: [PATCH 07/61] cfg80211: export cfg80211_chandef_dfs_required It will be used later by the IBSS CSA implementation of mac80211. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 9 +++++++++ net/wireless/chan.c | 1 + net/wireless/core.h | 9 --------- 3 files changed, 10 insertions(+), 9 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index cb710913d5c8..45f6bf591104 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -436,6 +436,15 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, const struct cfg80211_chan_def *chandef, u32 prohibited_flags); +/** + * cfg80211_chandef_dfs_required - checks if radar detection is required + * @wiphy: the wiphy to validate against + * @chandef: the channel definition to check + * Return: 1 if radar detection is required, 0 if it is not, < 0 on error + */ +int cfg80211_chandef_dfs_required(struct wiphy *wiphy, + const struct cfg80211_chan_def *chandef); + /** * ieee80211_chandef_rate_flags - returns rate flags for a channel * diff --git a/net/wireless/chan.c b/net/wireless/chan.c index 50f6195c8b70..16f3c3a7b2c1 100644 --- a/net/wireless/chan.c +++ b/net/wireless/chan.c @@ -328,6 +328,7 @@ int cfg80211_chandef_dfs_required(struct wiphy *wiphy, return cfg80211_get_chans_dfs_required(wiphy, chandef->center_freq2, width); } +EXPORT_SYMBOL(cfg80211_chandef_dfs_required); static bool cfg80211_secondary_chans_ok(struct wiphy *wiphy, u32 center_freq, u32 bandwidth, diff --git a/net/wireless/core.h b/net/wireless/core.h index 9ad43c619c54..b43efac4efca 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -382,15 +382,6 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, enum cfg80211_chan_mode chanmode, u8 radar_detect); -/** - * cfg80211_chandef_dfs_required - checks if radar detection is required - * @wiphy: the wiphy to validate against - * @chandef: the channel definition to check - * Return: 1 if radar detection is required, 0 if it is not, < 0 on error - */ -int cfg80211_chandef_dfs_required(struct wiphy *wiphy, - const struct cfg80211_chan_def *c); - void cfg80211_set_dfs_state(struct wiphy *wiphy, const struct cfg80211_chan_def *chandef, enum nl80211_dfs_state dfs_state); From e6b7cde4d3e155f118b81f1f62f86554c529083a Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 28 Aug 2013 13:41:29 +0200 Subject: [PATCH 08/61] mac80211: split off channel switch parsing function The channel switch parsing function can be re-used for the IBSS code, put the common part into an extra function. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer [also move/rename chandef_downgrade] Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 24 ++++ net/mac80211/mlme.c | 239 +++---------------------------------- net/mac80211/spectmgmt.c | 162 +++++++++++++++++++++++++ net/mac80211/util.c | 60 ++++++++++ 4 files changed, 262 insertions(+), 223 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index d353c6462d0f..7f0e6da8e6f8 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1480,6 +1480,29 @@ void ieee80211_apply_vhtcap_overrides(struct ieee80211_sub_if_data *sdata, void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len); +/** + * ieee80211_parse_ch_switch_ie - parses channel switch IEs + * @sdata: the sdata of the interface which has received the frame + * @elems: parsed 802.11 elements received with the frame + * @beacon: indicates if the frame was a beacon or probe response + * @current_band: indicates the current band + * @sta_flags: contains information about own capabilities and restrictions + * to decide which channel switch announcements can be accepted. Only the + * following subset of &enum ieee80211_sta_flags are evaluated: + * %IEEE80211_STA_DISABLE_HT, %IEEE80211_STA_DISABLE_VHT, + * %IEEE80211_STA_DISABLE_40MHZ, %IEEE80211_STA_DISABLE_80P80MHZ, + * %IEEE80211_STA_DISABLE_160MHZ. + * @count: to be filled with the counter until the switch (on success only) + * @bssid: the currently connected bssid (for reporting) + * @mode: to be filled with CSA mode (on success only) + * @new_chandef: to be filled with destination chandef (on success only) + * Return: 0 on success, <0 on error and >0 if there is nothing to parse. + */ +int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata, + struct ieee802_11_elems *elems, bool beacon, + enum ieee80211_band current_band, + u32 sta_flags, u8 *bssid, u8 *count, u8 *mode, + struct cfg80211_chan_def *new_chandef); /* Suspend/resume and hw reconfiguration */ int ieee80211_reconfig(struct ieee80211_local *local); @@ -1653,6 +1676,7 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata, void ieee80211_ht_oper_to_chandef(struct ieee80211_channel *control_chan, const struct ieee80211_ht_operation *ht_oper, struct cfg80211_chan_def *chandef); +u32 ieee80211_chandef_downgrade(struct cfg80211_chan_def *c); int __must_check ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index e396a2a97319..9fce0f49cd10 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -145,66 +145,6 @@ static int ecw2cw(int ecw) return (1 << ecw) - 1; } -static u32 chandef_downgrade(struct cfg80211_chan_def *c) -{ - u32 ret; - int tmp; - - switch (c->width) { - case NL80211_CHAN_WIDTH_20: - c->width = NL80211_CHAN_WIDTH_20_NOHT; - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - break; - case NL80211_CHAN_WIDTH_40: - c->width = NL80211_CHAN_WIDTH_20; - c->center_freq1 = c->chan->center_freq; - ret = IEEE80211_STA_DISABLE_40MHZ | - IEEE80211_STA_DISABLE_VHT; - break; - case NL80211_CHAN_WIDTH_80: - tmp = (30 + c->chan->center_freq - c->center_freq1)/20; - /* n_P40 */ - tmp /= 2; - /* freq_P40 */ - c->center_freq1 = c->center_freq1 - 20 + 40 * tmp; - c->width = NL80211_CHAN_WIDTH_40; - ret = IEEE80211_STA_DISABLE_VHT; - break; - case NL80211_CHAN_WIDTH_80P80: - c->center_freq2 = 0; - c->width = NL80211_CHAN_WIDTH_80; - ret = IEEE80211_STA_DISABLE_80P80MHZ | - IEEE80211_STA_DISABLE_160MHZ; - break; - case NL80211_CHAN_WIDTH_160: - /* n_P20 */ - tmp = (70 + c->chan->center_freq - c->center_freq1)/20; - /* n_P80 */ - tmp /= 4; - c->center_freq1 = c->center_freq1 - 40 + 80 * tmp; - c->width = NL80211_CHAN_WIDTH_80; - ret = IEEE80211_STA_DISABLE_80P80MHZ | - IEEE80211_STA_DISABLE_160MHZ; - break; - default: - case NL80211_CHAN_WIDTH_20_NOHT: - WARN_ON_ONCE(1); - c->width = NL80211_CHAN_WIDTH_20_NOHT; - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - break; - case NL80211_CHAN_WIDTH_5: - case NL80211_CHAN_WIDTH_10: - WARN_ON_ONCE(1); - /* keep c->width */ - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - break; - } - - WARN_ON_ONCE(!cfg80211_chandef_valid(c)); - - return ret; -} - static u32 ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, @@ -352,7 +292,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, break; } - ret |= chandef_downgrade(chandef); + ret |= ieee80211_chandef_downgrade(chandef); } if (chandef->width != vht_chandef.width && !tracking) @@ -406,13 +346,13 @@ static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata, */ if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ && chandef.width == NL80211_CHAN_WIDTH_80P80) - flags |= chandef_downgrade(&chandef); + flags |= ieee80211_chandef_downgrade(&chandef); if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ && chandef.width == NL80211_CHAN_WIDTH_160) - flags |= chandef_downgrade(&chandef); + flags |= ieee80211_chandef_downgrade(&chandef); if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ && chandef.width > NL80211_CHAN_WIDTH_20) - flags |= chandef_downgrade(&chandef); + flags |= ieee80211_chandef_downgrade(&chandef); if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef)) return 0; @@ -999,20 +939,12 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct cfg80211_bss *cbss = ifmgd->associated; - struct ieee80211_bss *bss; struct ieee80211_chanctx *chanctx; - enum ieee80211_band new_band; - int new_freq; - u8 new_chan_no; + enum ieee80211_band current_band; u8 count; u8 mode; - struct ieee80211_channel *new_chan; struct cfg80211_chan_def new_chandef = {}; - struct cfg80211_chan_def new_vht_chandef = {}; - const struct ieee80211_sec_chan_offs_ie *sec_chan_offs; - const struct ieee80211_wide_bw_chansw_ie *wide_bw_chansw_ie; - const struct ieee80211_ht_operation *ht_oper; - int secondary_channel_offset = -1; + int res; sdata_assert_lock(sdata); @@ -1026,162 +958,23 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, if (ifmgd->flags & IEEE80211_STA_CSA_RECEIVED) return; - sec_chan_offs = elems->sec_chan_offs; - wide_bw_chansw_ie = elems->wide_bw_chansw_ie; - ht_oper = elems->ht_operation; - - if (ifmgd->flags & (IEEE80211_STA_DISABLE_HT | - IEEE80211_STA_DISABLE_40MHZ)) { - sec_chan_offs = NULL; - wide_bw_chansw_ie = NULL; - /* only used for bandwidth here */ - ht_oper = NULL; - } - - if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT) - wide_bw_chansw_ie = NULL; - - if (elems->ext_chansw_ie) { - if (!ieee80211_operating_class_to_band( - elems->ext_chansw_ie->new_operating_class, - &new_band)) { - sdata_info(sdata, - "cannot understand ECSA IE operating class %d, disconnecting\n", - elems->ext_chansw_ie->new_operating_class); - ieee80211_queue_work(&local->hw, - &ifmgd->csa_connection_drop_work); - } - new_chan_no = elems->ext_chansw_ie->new_ch_num; - count = elems->ext_chansw_ie->count; - mode = elems->ext_chansw_ie->mode; - } else if (elems->ch_switch_ie) { - new_band = cbss->channel->band; - new_chan_no = elems->ch_switch_ie->new_ch_num; - count = elems->ch_switch_ie->count; - mode = elems->ch_switch_ie->mode; - } else { - /* nothing here we understand */ - return; - } - - bss = (void *)cbss->priv; - - new_freq = ieee80211_channel_to_frequency(new_chan_no, new_band); - new_chan = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq); - if (!new_chan || new_chan->flags & IEEE80211_CHAN_DISABLED) { - sdata_info(sdata, - "AP %pM switches to unsupported channel (%d MHz), disconnecting\n", - ifmgd->associated->bssid, new_freq); + current_band = cbss->channel->band; + res = ieee80211_parse_ch_switch_ie(sdata, elems, beacon, current_band, + ifmgd->flags, + ifmgd->associated->bssid, &count, + &mode, &new_chandef); + if (res < 0) ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work); + if (res) return; - } - - if (!beacon && sec_chan_offs) { - secondary_channel_offset = sec_chan_offs->sec_chan_offs; - } else if (beacon && ht_oper) { - secondary_channel_offset = - ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET; - } else if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { - /* - * If it's not a beacon, HT is enabled and the IE not present, - * it's 20 MHz, 802.11-2012 8.5.2.6: - * This element [the Secondary Channel Offset Element] is - * present when switching to a 40 MHz channel. It may be - * present when switching to a 20 MHz channel (in which - * case the secondary channel offset is set to SCN). - */ - secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; - } - - switch (secondary_channel_offset) { - default: - /* secondary_channel_offset was present but is invalid */ - case IEEE80211_HT_PARAM_CHA_SEC_NONE: - cfg80211_chandef_create(&new_chandef, new_chan, - NL80211_CHAN_HT20); - break; - case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: - cfg80211_chandef_create(&new_chandef, new_chan, - NL80211_CHAN_HT40PLUS); - break; - case IEEE80211_HT_PARAM_CHA_SEC_BELOW: - cfg80211_chandef_create(&new_chandef, new_chan, - NL80211_CHAN_HT40MINUS); - break; - case -1: - cfg80211_chandef_create(&new_chandef, new_chan, - NL80211_CHAN_NO_HT); - /* keep width for 5/10 MHz channels */ - switch (sdata->vif.bss_conf.chandef.width) { - case NL80211_CHAN_WIDTH_5: - case NL80211_CHAN_WIDTH_10: - new_chandef.width = sdata->vif.bss_conf.chandef.width; - break; - default: - break; - } - break; - } - - if (wide_bw_chansw_ie) { - new_vht_chandef.chan = new_chan; - new_vht_chandef.center_freq1 = - ieee80211_channel_to_frequency( - wide_bw_chansw_ie->new_center_freq_seg0, - new_band); - - switch (wide_bw_chansw_ie->new_channel_width) { - default: - /* hmmm, ignore VHT and use HT if present */ - case IEEE80211_VHT_CHANWIDTH_USE_HT: - new_vht_chandef.chan = NULL; - break; - case IEEE80211_VHT_CHANWIDTH_80MHZ: - new_vht_chandef.width = NL80211_CHAN_WIDTH_80; - break; - case IEEE80211_VHT_CHANWIDTH_160MHZ: - new_vht_chandef.width = NL80211_CHAN_WIDTH_160; - break; - case IEEE80211_VHT_CHANWIDTH_80P80MHZ: - /* field is otherwise reserved */ - new_vht_chandef.center_freq2 = - ieee80211_channel_to_frequency( - wide_bw_chansw_ie->new_center_freq_seg1, - new_band); - new_vht_chandef.width = NL80211_CHAN_WIDTH_80P80; - break; - } - if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ && - new_vht_chandef.width == NL80211_CHAN_WIDTH_80P80) - chandef_downgrade(&new_vht_chandef); - if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ && - new_vht_chandef.width == NL80211_CHAN_WIDTH_160) - chandef_downgrade(&new_vht_chandef); - if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ && - new_vht_chandef.width > NL80211_CHAN_WIDTH_20) - chandef_downgrade(&new_vht_chandef); - } - - /* if VHT data is there validate & use it */ - if (new_vht_chandef.chan) { - if (!cfg80211_chandef_compatible(&new_vht_chandef, - &new_chandef)) { - sdata_info(sdata, - "AP %pM CSA has inconsistent channel data, disconnecting\n", - ifmgd->associated->bssid); - ieee80211_queue_work(&local->hw, - &ifmgd->csa_connection_drop_work); - return; - } - new_chandef = new_vht_chandef; - } if (!cfg80211_chandef_usable(local->hw.wiphy, &new_chandef, IEEE80211_CHAN_DISABLED)) { sdata_info(sdata, "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n", - ifmgd->associated->bssid, new_freq, + ifmgd->associated->bssid, + new_chandef.chan->center_freq, new_chandef.width, new_chandef.center_freq1, new_chandef.center_freq2); ieee80211_queue_work(&local->hw, @@ -3856,7 +3649,7 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, return ret; while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) { - ifmgd->flags |= chandef_downgrade(&chandef); + ifmgd->flags |= ieee80211_chandef_downgrade(&chandef); ret = ieee80211_vif_use_channel(sdata, &chandef, IEEE80211_CHANCTX_SHARED); } diff --git a/net/mac80211/spectmgmt.c b/net/mac80211/spectmgmt.c index 578eea3fc04d..921597e279a3 100644 --- a/net/mac80211/spectmgmt.c +++ b/net/mac80211/spectmgmt.c @@ -21,6 +21,168 @@ #include "sta_info.h" #include "wme.h" +int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata, + struct ieee802_11_elems *elems, bool beacon, + enum ieee80211_band current_band, + u32 sta_flags, u8 *bssid, u8 *count, u8 *mode, + struct cfg80211_chan_def *new_chandef) +{ + enum ieee80211_band new_band; + int new_freq; + u8 new_chan_no; + struct ieee80211_channel *new_chan; + struct cfg80211_chan_def new_vht_chandef = {}; + const struct ieee80211_sec_chan_offs_ie *sec_chan_offs; + const struct ieee80211_wide_bw_chansw_ie *wide_bw_chansw_ie; + const struct ieee80211_ht_operation *ht_oper; + int secondary_channel_offset = -1; + + sec_chan_offs = elems->sec_chan_offs; + wide_bw_chansw_ie = elems->wide_bw_chansw_ie; + ht_oper = elems->ht_operation; + + if (sta_flags & (IEEE80211_STA_DISABLE_HT | + IEEE80211_STA_DISABLE_40MHZ)) { + sec_chan_offs = NULL; + wide_bw_chansw_ie = NULL; + /* only used for bandwidth here */ + ht_oper = NULL; + } + + if (sta_flags & IEEE80211_STA_DISABLE_VHT) + wide_bw_chansw_ie = NULL; + + if (elems->ext_chansw_ie) { + if (!ieee80211_operating_class_to_band( + elems->ext_chansw_ie->new_operating_class, + &new_band)) { + sdata_info(sdata, + "cannot understand ECSA IE operating class %d, disconnecting\n", + elems->ext_chansw_ie->new_operating_class); + return -EINVAL; + } + new_chan_no = elems->ext_chansw_ie->new_ch_num; + *count = elems->ext_chansw_ie->count; + *mode = elems->ext_chansw_ie->mode; + } else if (elems->ch_switch_ie) { + new_band = current_band; + new_chan_no = elems->ch_switch_ie->new_ch_num; + *count = elems->ch_switch_ie->count; + *mode = elems->ch_switch_ie->mode; + } else { + /* nothing here we understand */ + return 1; + } + + new_freq = ieee80211_channel_to_frequency(new_chan_no, new_band); + new_chan = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq); + if (!new_chan || new_chan->flags & IEEE80211_CHAN_DISABLED) { + sdata_info(sdata, + "BSS %pM switches to unsupported channel (%d MHz), disconnecting\n", + bssid, new_freq); + return -EINVAL; + } + + if (!beacon && sec_chan_offs) { + secondary_channel_offset = sec_chan_offs->sec_chan_offs; + } else if (beacon && ht_oper) { + secondary_channel_offset = + ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET; + } else if (!(sta_flags & IEEE80211_STA_DISABLE_HT)) { + /* If it's not a beacon, HT is enabled and the IE not present, + * it's 20 MHz, 802.11-2012 8.5.2.6: + * This element [the Secondary Channel Offset Element] is + * present when switching to a 40 MHz channel. It may be + * present when switching to a 20 MHz channel (in which + * case the secondary channel offset is set to SCN). + */ + secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; + } + + switch (secondary_channel_offset) { + default: + /* secondary_channel_offset was present but is invalid */ + case IEEE80211_HT_PARAM_CHA_SEC_NONE: + cfg80211_chandef_create(new_chandef, new_chan, + NL80211_CHAN_HT20); + break; + case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + cfg80211_chandef_create(new_chandef, new_chan, + NL80211_CHAN_HT40PLUS); + break; + case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + cfg80211_chandef_create(new_chandef, new_chan, + NL80211_CHAN_HT40MINUS); + break; + case -1: + cfg80211_chandef_create(new_chandef, new_chan, + NL80211_CHAN_NO_HT); + /* keep width for 5/10 MHz channels */ + switch (sdata->vif.bss_conf.chandef.width) { + case NL80211_CHAN_WIDTH_5: + case NL80211_CHAN_WIDTH_10: + new_chandef->width = sdata->vif.bss_conf.chandef.width; + break; + default: + break; + } + break; + } + + if (wide_bw_chansw_ie) { + new_vht_chandef.chan = new_chan; + new_vht_chandef.center_freq1 = + ieee80211_channel_to_frequency( + wide_bw_chansw_ie->new_center_freq_seg0, + new_band); + + switch (wide_bw_chansw_ie->new_channel_width) { + default: + /* hmmm, ignore VHT and use HT if present */ + case IEEE80211_VHT_CHANWIDTH_USE_HT: + new_vht_chandef.chan = NULL; + break; + case IEEE80211_VHT_CHANWIDTH_80MHZ: + new_vht_chandef.width = NL80211_CHAN_WIDTH_80; + break; + case IEEE80211_VHT_CHANWIDTH_160MHZ: + new_vht_chandef.width = NL80211_CHAN_WIDTH_160; + break; + case IEEE80211_VHT_CHANWIDTH_80P80MHZ: + /* field is otherwise reserved */ + new_vht_chandef.center_freq2 = + ieee80211_channel_to_frequency( + wide_bw_chansw_ie->new_center_freq_seg1, + new_band); + new_vht_chandef.width = NL80211_CHAN_WIDTH_80P80; + break; + } + if (sta_flags & IEEE80211_STA_DISABLE_80P80MHZ && + new_vht_chandef.width == NL80211_CHAN_WIDTH_80P80) + ieee80211_chandef_downgrade(&new_vht_chandef); + if (sta_flags & IEEE80211_STA_DISABLE_160MHZ && + new_vht_chandef.width == NL80211_CHAN_WIDTH_160) + ieee80211_chandef_downgrade(&new_vht_chandef); + if (sta_flags & IEEE80211_STA_DISABLE_40MHZ && + new_vht_chandef.width > NL80211_CHAN_WIDTH_20) + ieee80211_chandef_downgrade(&new_vht_chandef); + } + + /* if VHT data is there validate & use it */ + if (new_vht_chandef.chan) { + if (!cfg80211_chandef_compatible(&new_vht_chandef, + new_chandef)) { + sdata_info(sdata, + "BSS %pM: CSA has inconsistent channel data, disconnecting\n", + bssid); + return -EINVAL; + } + *new_chandef = new_vht_chandef; + } + + return 0; +} + static void ieee80211_send_refuse_measurement_request(struct ieee80211_sub_if_data *sdata, struct ieee80211_msrment_ie *request_ie, const u8 *da, const u8 *bssid, diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 75a16853fb45..3c8283b9b45a 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2292,3 +2292,63 @@ void ieee80211_radar_detected(struct ieee80211_hw *hw) ieee80211_queue_work(hw, &local->radar_detected_work); } EXPORT_SYMBOL(ieee80211_radar_detected); + +u32 ieee80211_chandef_downgrade(struct cfg80211_chan_def *c) +{ + u32 ret; + int tmp; + + switch (c->width) { + case NL80211_CHAN_WIDTH_20: + c->width = NL80211_CHAN_WIDTH_20_NOHT; + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + break; + case NL80211_CHAN_WIDTH_40: + c->width = NL80211_CHAN_WIDTH_20; + c->center_freq1 = c->chan->center_freq; + ret = IEEE80211_STA_DISABLE_40MHZ | + IEEE80211_STA_DISABLE_VHT; + break; + case NL80211_CHAN_WIDTH_80: + tmp = (30 + c->chan->center_freq - c->center_freq1)/20; + /* n_P40 */ + tmp /= 2; + /* freq_P40 */ + c->center_freq1 = c->center_freq1 - 20 + 40 * tmp; + c->width = NL80211_CHAN_WIDTH_40; + ret = IEEE80211_STA_DISABLE_VHT; + break; + case NL80211_CHAN_WIDTH_80P80: + c->center_freq2 = 0; + c->width = NL80211_CHAN_WIDTH_80; + ret = IEEE80211_STA_DISABLE_80P80MHZ | + IEEE80211_STA_DISABLE_160MHZ; + break; + case NL80211_CHAN_WIDTH_160: + /* n_P20 */ + tmp = (70 + c->chan->center_freq - c->center_freq1)/20; + /* n_P80 */ + tmp /= 4; + c->center_freq1 = c->center_freq1 - 40 + 80 * tmp; + c->width = NL80211_CHAN_WIDTH_80; + ret = IEEE80211_STA_DISABLE_80P80MHZ | + IEEE80211_STA_DISABLE_160MHZ; + break; + default: + case NL80211_CHAN_WIDTH_20_NOHT: + WARN_ON_ONCE(1); + c->width = NL80211_CHAN_WIDTH_20_NOHT; + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + break; + case NL80211_CHAN_WIDTH_5: + case NL80211_CHAN_WIDTH_10: + WARN_ON_ONCE(1); + /* keep c->width */ + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + break; + } + + WARN_ON_ONCE(!cfg80211_chandef_valid(c)); + + return ret; +} From 871a4180b8b62dbed54cd203c33bdab7fce24e6f Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 28 Aug 2013 13:41:30 +0200 Subject: [PATCH 09/61] mac80211: split off ibss disconnect IBSS CSA will require to disconnect if a channel switch fails, but mac80211 should search and re-connect after this disconnect. To allow such usage, split off the ibss disconnect process in a separate function which only performs the disconnect without overwriting nl80211-supplied parameters. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: Johannes Berg --- net/mac80211/ibss.c | 172 +++++++++++++++++++++++--------------------- 1 file changed, 92 insertions(+), 80 deletions(-) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index a12afe77bb26..0c3ec082e4f5 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -499,6 +499,96 @@ ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata, const u8 *bssid, return ieee80211_ibss_finish_sta(sta); } +static int ieee80211_sta_active_ibss(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_local *local = sdata->local; + int active = 0; + struct sta_info *sta; + + sdata_assert_lock(sdata); + + rcu_read_lock(); + + list_for_each_entry_rcu(sta, &local->sta_list, list) { + if (sta->sdata == sdata && + time_after(sta->last_rx + IEEE80211_IBSS_MERGE_INTERVAL, + jiffies)) { + active++; + break; + } + } + + rcu_read_unlock(); + + return active; +} + +static void ieee80211_ibss_disconnect(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; + struct ieee80211_local *local = sdata->local; + struct cfg80211_bss *cbss; + struct beacon_data *presp; + struct sta_info *sta; + int active_ibss; + u16 capability; + + active_ibss = ieee80211_sta_active_ibss(sdata); + + if (!active_ibss && !is_zero_ether_addr(ifibss->bssid)) { + capability = WLAN_CAPABILITY_IBSS; + + if (ifibss->privacy) + capability |= WLAN_CAPABILITY_PRIVACY; + + cbss = cfg80211_get_bss(local->hw.wiphy, ifibss->chandef.chan, + ifibss->bssid, ifibss->ssid, + ifibss->ssid_len, WLAN_CAPABILITY_IBSS | + WLAN_CAPABILITY_PRIVACY, + capability); + + if (cbss) { + cfg80211_unlink_bss(local->hw.wiphy, cbss); + cfg80211_put_bss(sdata->local->hw.wiphy, cbss); + } + } + + ifibss->state = IEEE80211_IBSS_MLME_SEARCH; + + sta_info_flush(sdata); + + spin_lock_bh(&ifibss->incomplete_lock); + while (!list_empty(&ifibss->incomplete_stations)) { + sta = list_first_entry(&ifibss->incomplete_stations, + struct sta_info, list); + list_del(&sta->list); + spin_unlock_bh(&ifibss->incomplete_lock); + + sta_info_free(local, sta); + spin_lock_bh(&ifibss->incomplete_lock); + } + spin_unlock_bh(&ifibss->incomplete_lock); + + netif_carrier_off(sdata->dev); + + sdata->vif.bss_conf.ibss_joined = false; + sdata->vif.bss_conf.ibss_creator = false; + sdata->vif.bss_conf.enable_beacon = false; + sdata->vif.bss_conf.ssid_len = 0; + + /* remove beacon */ + presp = rcu_dereference_protected(ifibss->presp, + lockdep_is_held(&sdata->wdev.mtx)); + RCU_INIT_POINTER(sdata->u.ibss.presp, NULL); + if (presp) + kfree_rcu(presp, rcu_head); + + clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED | + BSS_CHANGED_IBSS); + ieee80211_vif_release_channel(sdata); +} + static void ieee80211_rx_mgmt_deauth_ibss(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len) @@ -775,30 +865,6 @@ void ieee80211_ibss_rx_no_sta(struct ieee80211_sub_if_data *sdata, ieee80211_queue_work(&local->hw, &sdata->work); } -static int ieee80211_sta_active_ibss(struct ieee80211_sub_if_data *sdata) -{ - struct ieee80211_local *local = sdata->local; - int active = 0; - struct sta_info *sta; - - sdata_assert_lock(sdata); - - rcu_read_lock(); - - list_for_each_entry_rcu(sta, &local->sta_list, list) { - if (sta->sdata == sdata && - time_after(sta->last_rx + IEEE80211_IBSS_MERGE_INTERVAL, - jiffies)) { - active++; - break; - } - } - - rcu_read_unlock(); - - return active; -} - static void ieee80211_ibss_sta_expire(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; @@ -1265,73 +1331,19 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata, int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; - struct ieee80211_local *local = sdata->local; - struct cfg80211_bss *cbss; - u16 capability; - int active_ibss; - struct sta_info *sta; - struct beacon_data *presp; - active_ibss = ieee80211_sta_active_ibss(sdata); - - if (!active_ibss && !is_zero_ether_addr(ifibss->bssid)) { - capability = WLAN_CAPABILITY_IBSS; - - if (ifibss->privacy) - capability |= WLAN_CAPABILITY_PRIVACY; - - cbss = cfg80211_get_bss(local->hw.wiphy, ifibss->chandef.chan, - ifibss->bssid, ifibss->ssid, - ifibss->ssid_len, WLAN_CAPABILITY_IBSS | - WLAN_CAPABILITY_PRIVACY, - capability); - - if (cbss) { - cfg80211_unlink_bss(local->hw.wiphy, cbss); - cfg80211_put_bss(local->hw.wiphy, cbss); - } - } - - ifibss->state = IEEE80211_IBSS_MLME_SEARCH; - memset(ifibss->bssid, 0, ETH_ALEN); + ieee80211_ibss_disconnect(sdata); ifibss->ssid_len = 0; - - sta_info_flush(sdata); - - spin_lock_bh(&ifibss->incomplete_lock); - while (!list_empty(&ifibss->incomplete_stations)) { - sta = list_first_entry(&ifibss->incomplete_stations, - struct sta_info, list); - list_del(&sta->list); - spin_unlock_bh(&ifibss->incomplete_lock); - - sta_info_free(local, sta); - spin_lock_bh(&ifibss->incomplete_lock); - } - spin_unlock_bh(&ifibss->incomplete_lock); - - netif_carrier_off(sdata->dev); + memset(ifibss->bssid, 0, ETH_ALEN); /* remove beacon */ kfree(sdata->u.ibss.ie); - presp = rcu_dereference_protected(ifibss->presp, - lockdep_is_held(&sdata->wdev.mtx)); - RCU_INIT_POINTER(sdata->u.ibss.presp, NULL); /* on the next join, re-program HT parameters */ memset(&ifibss->ht_capa, 0, sizeof(ifibss->ht_capa)); memset(&ifibss->ht_capa_mask, 0, sizeof(ifibss->ht_capa_mask)); - sdata->vif.bss_conf.ibss_joined = false; - sdata->vif.bss_conf.ibss_creator = false; - sdata->vif.bss_conf.enable_beacon = false; - sdata->vif.bss_conf.ssid_len = 0; - clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); - ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED | - BSS_CHANGED_IBSS); - ieee80211_vif_release_channel(sdata); synchronize_rcu(); - kfree(presp); skb_queue_purge(&sdata->skb_queue); From cd7760e62c2ac8581f050b2d36501d1a60beaf83 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 28 Aug 2013 13:41:31 +0200 Subject: [PATCH 10/61] mac80211: add support for CSA in IBSS mode This function adds the channel switch announcement implementation for the IBSS code. It is triggered by userspace (mac80211/cfg) or by external channel switch announcement, which have to be adopted. Both CSAs in beacons and action frames are supported. As for AP mode, the channel switch is applied after some time. However in IBSS mode, the channel switch IEs are generated in the kernel. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 87 ++++++--- net/mac80211/ibss.c | 354 ++++++++++++++++++++++++++++++++++++- net/mac80211/ieee80211_i.h | 5 + net/mac80211/iface.c | 4 + net/mac80211/rx.c | 38 ++-- net/mac80211/tx.c | 39 +++- 6 files changed, 482 insertions(+), 45 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 2e7855a1b10d..b455e7264f4f 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2865,30 +2865,38 @@ void ieee80211_csa_finalize_work(struct work_struct *work) if (!ieee80211_sdata_running(sdata)) return; - if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_AP)) - return; - sdata->radar_required = sdata->csa_radar_required; err = ieee80211_vif_change_channel(sdata, &local->csa_chandef, &changed); if (WARN_ON(err < 0)) return; - err = ieee80211_assign_beacon(sdata, sdata->u.ap.next_beacon); - if (err < 0) - return; + ieee80211_bss_info_change_notify(sdata, changed); - changed |= err; - kfree(sdata->u.ap.next_beacon); - sdata->u.ap.next_beacon = NULL; + switch (sdata->vif.type) { + case NL80211_IFTYPE_AP: + err = ieee80211_assign_beacon(sdata, sdata->u.ap.next_beacon); + if (err < 0) + return; + changed |= err; + kfree(sdata->u.ap.next_beacon); + sdata->u.ap.next_beacon = NULL; + + ieee80211_bss_info_change_notify(sdata, err); + break; + case NL80211_IFTYPE_ADHOC: + ieee80211_ibss_finish_csa(sdata); + break; + default: + WARN_ON(1); + return; + } sdata->vif.csa_active = false; ieee80211_wake_queues_by_reason(&sdata->local->hw, IEEE80211_MAX_QUEUE_MAP, IEEE80211_QUEUE_STOP_REASON_CSA); - ieee80211_bss_info_change_notify(sdata, changed); - cfg80211_ch_switch_notify(sdata->dev, &local->csa_chandef); } @@ -2936,20 +2944,56 @@ static int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, if (sdata->vif.csa_active) return -EBUSY; - /* only handle AP for now. */ switch (sdata->vif.type) { case NL80211_IFTYPE_AP: + sdata->csa_counter_offset_beacon = + params->counter_offset_beacon; + sdata->csa_counter_offset_presp = params->counter_offset_presp; + sdata->u.ap.next_beacon = + cfg80211_beacon_dup(¶ms->beacon_after); + if (!sdata->u.ap.next_beacon) + return -ENOMEM; + + err = ieee80211_assign_beacon(sdata, ¶ms->beacon_csa); + if (err < 0) { + kfree(sdata->u.ap.next_beacon); + return err; + } + break; + case NL80211_IFTYPE_ADHOC: + if (!sdata->vif.bss_conf.ibss_joined) + return -EINVAL; + + if (params->chandef.width != sdata->u.ibss.chandef.width) + return -EINVAL; + + switch (params->chandef.width) { + case NL80211_CHAN_WIDTH_40: + if (cfg80211_get_chandef_type(¶ms->chandef) != + cfg80211_get_chandef_type(&sdata->u.ibss.chandef)) + return -EINVAL; + case NL80211_CHAN_WIDTH_5: + case NL80211_CHAN_WIDTH_10: + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + break; + default: + return -EINVAL; + } + + /* changes into another band are not supported */ + if (sdata->u.ibss.chandef.chan->band != + params->chandef.chan->band) + return -EINVAL; + + err = ieee80211_ibss_csa_beacon(sdata, params); + if (err < 0) + return err; break; default: return -EOPNOTSUPP; } - sdata->u.ap.next_beacon = cfg80211_beacon_dup(¶ms->beacon_after); - if (!sdata->u.ap.next_beacon) - return -ENOMEM; - - sdata->csa_counter_offset_beacon = params->counter_offset_beacon; - sdata->csa_counter_offset_presp = params->counter_offset_presp; sdata->csa_radar_required = params->radar_required; if (params->block_tx) @@ -2957,10 +3001,6 @@ static int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, IEEE80211_MAX_QUEUE_MAP, IEEE80211_QUEUE_STOP_REASON_CSA); - err = ieee80211_assign_beacon(sdata, ¶ms->beacon_csa); - if (err < 0) - return err; - local->csa_chandef = params->chandef; sdata->vif.csa_active = true; @@ -3014,7 +3054,8 @@ static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, need_offchan = true; if (!ieee80211_is_action(mgmt->frame_control) || mgmt->u.action.category == WLAN_CATEGORY_PUBLIC || - mgmt->u.action.category == WLAN_CATEGORY_SELF_PROTECTED) + mgmt->u.action.category == WLAN_CATEGORY_SELF_PROTECTED || + mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) break; rcu_read_lock(); sta = sta_info_get(sdata, mgmt->da); diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 0c3ec082e4f5..c0042136f1d8 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -39,7 +39,8 @@ ieee80211_ibss_build_presp(struct ieee80211_sub_if_data *sdata, const int beacon_int, const u32 basic_rates, const u16 capability, u64 tsf, struct cfg80211_chan_def *chandef, - bool *have_higher_than_11mbit) + bool *have_higher_than_11mbit, + struct cfg80211_csa_settings *csa_settings) { struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; struct ieee80211_local *local = sdata->local; @@ -59,6 +60,7 @@ ieee80211_ibss_build_presp(struct ieee80211_sub_if_data *sdata, 2 + 8 /* max Supported Rates */ + 3 /* max DS params */ + 4 /* IBSS params */ + + 5 /* Channel Switch Announcement */ + 2 + (IEEE80211_MAX_SUPP_RATES - 8) + 2 + sizeof(struct ieee80211_ht_cap) + 2 + sizeof(struct ieee80211_ht_operation) + @@ -135,6 +137,16 @@ ieee80211_ibss_build_presp(struct ieee80211_sub_if_data *sdata, *pos++ = 0; *pos++ = 0; + if (csa_settings) { + *pos++ = WLAN_EID_CHANNEL_SWITCH; + *pos++ = 3; + *pos++ = csa_settings->block_tx ? 1 : 0; + *pos++ = ieee80211_frequency_to_channel( + csa_settings->chandef.chan->center_freq); + sdata->csa_counter_offset_beacon = (pos - presp->head); + *pos++ = csa_settings->count; + } + /* put the remaining rates in WLAN_EID_EXT_SUPP_RATES */ if (rates_n > 8) { *pos++ = WLAN_EID_EXT_SUPP_RATES; @@ -276,7 +288,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, presp = ieee80211_ibss_build_presp(sdata, beacon_int, basic_rates, capability, tsf, &chandef, - &have_higher_than_11mbit); + &have_higher_than_11mbit, NULL); if (!presp) return; @@ -416,6 +428,109 @@ static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, tsf, false); } +int ieee80211_ibss_csa_beacon(struct ieee80211_sub_if_data *sdata, + struct cfg80211_csa_settings *csa_settings) +{ + struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; + struct beacon_data *presp, *old_presp; + struct cfg80211_bss *cbss; + const struct cfg80211_bss_ies *ies; + u16 capability; + u64 tsf; + int ret = 0; + + sdata_assert_lock(sdata); + + capability = WLAN_CAPABILITY_IBSS; + + if (ifibss->privacy) + capability |= WLAN_CAPABILITY_PRIVACY; + + cbss = cfg80211_get_bss(sdata->local->hw.wiphy, ifibss->chandef.chan, + ifibss->bssid, ifibss->ssid, + ifibss->ssid_len, WLAN_CAPABILITY_IBSS | + WLAN_CAPABILITY_PRIVACY, + capability); + + if (WARN_ON(!cbss)) { + ret = -EINVAL; + goto out; + } + + rcu_read_lock(); + ies = rcu_dereference(cbss->ies); + tsf = ies->tsf; + rcu_read_unlock(); + cfg80211_put_bss(sdata->local->hw.wiphy, cbss); + + old_presp = rcu_dereference_protected(ifibss->presp, + lockdep_is_held(&sdata->wdev.mtx)); + + presp = ieee80211_ibss_build_presp(sdata, + sdata->vif.bss_conf.beacon_int, + sdata->vif.bss_conf.basic_rates, + capability, tsf, &ifibss->chandef, + NULL, csa_settings); + if (!presp) { + ret = -ENOMEM; + goto out; + } + + rcu_assign_pointer(ifibss->presp, presp); + if (old_presp) + kfree_rcu(old_presp, rcu_head); + + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON); + out: + return ret; +} + +int ieee80211_ibss_finish_csa(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; + struct cfg80211_bss *cbss; + int err; + u16 capability; + + sdata_lock(sdata); + /* update cfg80211 bss information with the new channel */ + if (!is_zero_ether_addr(ifibss->bssid)) { + capability = WLAN_CAPABILITY_IBSS; + + if (ifibss->privacy) + capability |= WLAN_CAPABILITY_PRIVACY; + + cbss = cfg80211_get_bss(sdata->local->hw.wiphy, + ifibss->chandef.chan, + ifibss->bssid, ifibss->ssid, + ifibss->ssid_len, WLAN_CAPABILITY_IBSS | + WLAN_CAPABILITY_PRIVACY, + capability); + /* XXX: should not really modify cfg80211 data */ + if (cbss) { + cbss->channel = sdata->local->csa_chandef.chan; + cfg80211_put_bss(sdata->local->hw.wiphy, cbss); + } + } + + ifibss->chandef = sdata->local->csa_chandef; + + /* generate the beacon */ + err = ieee80211_ibss_csa_beacon(sdata, NULL); + sdata_unlock(sdata); + if (err < 0) + return err; + + return 0; +} + +void ieee80211_ibss_stop(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; + + cancel_work_sync(&ifibss->csa_connection_drop_work); +} + static struct sta_info *ieee80211_ibss_finish_sta(struct sta_info *sta) __acquires(RCU) { @@ -589,6 +704,204 @@ static void ieee80211_ibss_disconnect(struct ieee80211_sub_if_data *sdata) ieee80211_vif_release_channel(sdata); } +static void ieee80211_csa_connection_drop_work(struct work_struct *work) +{ + struct ieee80211_sub_if_data *sdata = + container_of(work, struct ieee80211_sub_if_data, + u.ibss.csa_connection_drop_work); + + ieee80211_ibss_disconnect(sdata); + synchronize_rcu(); + skb_queue_purge(&sdata->skb_queue); + + /* trigger a scan to find another IBSS network to join */ + ieee80211_queue_work(&sdata->local->hw, &sdata->work); +} + +static bool +ieee80211_ibss_process_chanswitch(struct ieee80211_sub_if_data *sdata, + struct ieee802_11_elems *elems, + bool beacon) +{ + struct cfg80211_csa_settings params; + struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; + struct ieee80211_chanctx_conf *chanctx_conf; + struct ieee80211_chanctx *chanctx; + enum nl80211_channel_type ch_type; + int err, num_chanctx; + u32 sta_flags; + u8 mode; + + if (sdata->vif.csa_active) + return true; + + if (!sdata->vif.bss_conf.ibss_joined) + return false; + + sta_flags = IEEE80211_STA_DISABLE_VHT; + switch (ifibss->chandef.width) { + case NL80211_CHAN_WIDTH_5: + case NL80211_CHAN_WIDTH_10: + case NL80211_CHAN_WIDTH_20_NOHT: + sta_flags |= IEEE80211_STA_DISABLE_HT; + /* fall through */ + case NL80211_CHAN_WIDTH_20: + sta_flags |= IEEE80211_STA_DISABLE_40MHZ; + break; + default: + break; + } + + memset(¶ms, 0, sizeof(params)); + err = ieee80211_parse_ch_switch_ie(sdata, elems, beacon, + ifibss->chandef.chan->band, + sta_flags, ifibss->bssid, + ¶ms.count, &mode, + ¶ms.chandef); + + /* can't switch to destination channel, fail */ + if (err < 0) + goto disconnect; + + /* did not contain a CSA */ + if (err) + return false; + + if (ifibss->chandef.chan->band != params.chandef.chan->band) + goto disconnect; + + switch (ifibss->chandef.width) { + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + case NL80211_CHAN_WIDTH_40: + /* keep our current HT mode (HT20/HT40+/HT40-), even if + * another mode has been announced. The mode is not adopted + * within the beacon while doing CSA and we should therefore + * keep the mode which we announce. + */ + ch_type = cfg80211_get_chandef_type(&ifibss->chandef); + cfg80211_chandef_create(¶ms.chandef, params.chandef.chan, + ch_type); + break; + case NL80211_CHAN_WIDTH_5: + case NL80211_CHAN_WIDTH_10: + if (params.chandef.width != ifibss->chandef.width) { + sdata_info(sdata, + "IBSS %pM received channel switch from incompatible channel width (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n", + ifibss->bssid, + params.chandef.chan->center_freq, + params.chandef.width, + params.chandef.center_freq1, + params.chandef.center_freq2); + goto disconnect; + } + break; + default: + /* should not happen, sta_flags should prevent VHT modes. */ + WARN_ON(1); + goto disconnect; + } + + if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, ¶ms.chandef, + IEEE80211_CHAN_DISABLED)) { + sdata_info(sdata, + "IBSS %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n", + ifibss->bssid, + params.chandef.chan->center_freq, + params.chandef.width, + params.chandef.center_freq1, + params.chandef.center_freq2); + goto disconnect; + } + + err = cfg80211_chandef_dfs_required(sdata->local->hw.wiphy, + ¶ms.chandef); + if (err < 0) + goto disconnect; + if (err) { + params.radar_required = true; + + /* TODO: IBSS-DFS not (yet) supported, disconnect. */ + goto disconnect; + } + + rcu_read_lock(); + chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); + if (!chanctx_conf) { + rcu_read_unlock(); + goto disconnect; + } + + /* don't handle for multi-VIF cases */ + chanctx = container_of(chanctx_conf, struct ieee80211_chanctx, conf); + if (chanctx->refcount > 1) { + rcu_read_unlock(); + goto disconnect; + } + num_chanctx = 0; + list_for_each_entry_rcu(chanctx, &sdata->local->chanctx_list, list) + num_chanctx++; + + if (num_chanctx > 1) { + rcu_read_unlock(); + goto disconnect; + } + rcu_read_unlock(); + + /* all checks done, now perform the channel switch. */ + ibss_dbg(sdata, + "received channel switch announcement to go to channel %d MHz\n", + params.chandef.chan->center_freq); + + params.block_tx = !!mode; + + ieee80211_ibss_csa_beacon(sdata, ¶ms); + sdata->csa_radar_required = params.radar_required; + + if (params.block_tx) + ieee80211_stop_queues_by_reason(&sdata->local->hw, + IEEE80211_MAX_QUEUE_MAP, + IEEE80211_QUEUE_STOP_REASON_CSA); + + sdata->local->csa_chandef = params.chandef; + sdata->vif.csa_active = true; + + ieee80211_bss_info_change_notify(sdata, err); + drv_channel_switch_beacon(sdata, ¶ms.chandef); + + return true; +disconnect: + ibss_dbg(sdata, "Can't handle channel switch, disconnect\n"); + ieee80211_queue_work(&sdata->local->hw, + &ifibss->csa_connection_drop_work); + + return true; +} + +static void +ieee80211_rx_mgmt_spectrum_mgmt(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, size_t len, + struct ieee80211_rx_status *rx_status, + struct ieee802_11_elems *elems) +{ + int required_len; + + if (len < IEEE80211_MIN_ACTION_SIZE + 1) + return; + + /* CSA is the only action we handle for now */ + if (mgmt->u.action.u.measurement.action_code != + WLAN_ACTION_SPCT_CHL_SWITCH) + return; + + required_len = IEEE80211_MIN_ACTION_SIZE + + sizeof(mgmt->u.action.u.chan_switch); + if (len < required_len) + return; + + ieee80211_ibss_process_chanswitch(sdata, elems, false); +} + static void ieee80211_rx_mgmt_deauth_ibss(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len) @@ -751,10 +1064,6 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, /* check if we need to merge IBSS */ - /* we use a fixed BSSID */ - if (sdata->u.ibss.fixed_bssid) - goto put_bss; - /* not an IBSS */ if (!(cbss->capability & WLAN_CAPABILITY_IBSS)) goto put_bss; @@ -770,10 +1079,18 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, sdata->u.ibss.ssid_len)) goto put_bss; + /* process channel switch */ + if (ieee80211_ibss_process_chanswitch(sdata, elems, true)) + goto put_bss; + /* same BSSID */ if (ether_addr_equal(cbss->bssid, sdata->u.ibss.bssid)) goto put_bss; + /* we use a fixed BSSID */ + if (sdata->u.ibss.fixed_bssid) + goto put_bss; + if (ieee80211_have_rx_timestamp(rx_status)) { /* time when timestamp field was received */ rx_timestamp = @@ -1142,6 +1459,8 @@ void ieee80211_ibss_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, struct ieee80211_rx_status *rx_status; struct ieee80211_mgmt *mgmt; u16 fc; + struct ieee802_11_elems elems; + int ies_len; rx_status = IEEE80211_SKB_RXCB(skb); mgmt = (struct ieee80211_mgmt *) skb->data; @@ -1167,6 +1486,27 @@ void ieee80211_ibss_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, case IEEE80211_STYPE_DEAUTH: ieee80211_rx_mgmt_deauth_ibss(sdata, mgmt, skb->len); break; + case IEEE80211_STYPE_ACTION: + switch (mgmt->u.action.category) { + case WLAN_CATEGORY_SPECTRUM_MGMT: + ies_len = skb->len - + offsetof(struct ieee80211_mgmt, + u.action.u.chan_switch.variable); + + if (ies_len < 0) + break; + + ieee802_11_parse_elems( + mgmt->u.action.u.chan_switch.variable, + ies_len, true, &elems); + + if (elems.parse_error) + break; + + ieee80211_rx_mgmt_spectrum_mgmt(sdata, mgmt, skb->len, + rx_status, &elems); + break; + } } mgmt_out: @@ -1233,6 +1573,8 @@ void ieee80211_ibss_setup_sdata(struct ieee80211_sub_if_data *sdata) (unsigned long) sdata); INIT_LIST_HEAD(&ifibss->incomplete_stations); spin_lock_init(&ifibss->incomplete_lock); + INIT_WORK(&ifibss->csa_connection_drop_work, + ieee80211_csa_connection_drop_work); } /* scan finished notification */ diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 7f0e6da8e6f8..3a87c8976a32 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -486,6 +486,7 @@ struct ieee80211_if_managed { struct ieee80211_if_ibss { struct timer_list timer; + struct work_struct csa_connection_drop_work; unsigned long last_scan_completed; @@ -1329,6 +1330,10 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata); void ieee80211_ibss_work(struct ieee80211_sub_if_data *sdata); void ieee80211_ibss_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb); +int ieee80211_ibss_csa_beacon(struct ieee80211_sub_if_data *sdata, + struct cfg80211_csa_settings *csa_settings); +int ieee80211_ibss_finish_csa(struct ieee80211_sub_if_data *sdata); +void ieee80211_ibss_stop(struct ieee80211_sub_if_data *sdata); /* mesh code */ void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index fcecd633514e..e48f103b9ade 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -766,6 +766,10 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, if (sdata->vif.type == NL80211_IFTYPE_STATION) ieee80211_mgd_stop(sdata); + if (sdata->vif.type == NL80211_IFTYPE_ADHOC) + ieee80211_ibss_stop(sdata); + + /* * Remove all stations associated with this interface. * diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 54395d7583ba..8e908e17e248 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2402,7 +2402,8 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) return RX_DROP_UNUSABLE; if (!rx->sta && mgmt->u.action.category != WLAN_CATEGORY_PUBLIC && - mgmt->u.action.category != WLAN_CATEGORY_SELF_PROTECTED) + mgmt->u.action.category != WLAN_CATEGORY_SELF_PROTECTED && + mgmt->u.action.category != WLAN_CATEGORY_SPECTRUM_MGMT) return RX_DROP_UNUSABLE; if (!(status->rx_flags & IEEE80211_RX_RA_MATCH)) @@ -2566,31 +2567,46 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) goto queue; case WLAN_CATEGORY_SPECTRUM_MGMT: - if (status->band != IEEE80211_BAND_5GHZ) - break; - - if (sdata->vif.type != NL80211_IFTYPE_STATION) - break; - /* verify action_code is present */ if (len < IEEE80211_MIN_ACTION_SIZE + 1) break; switch (mgmt->u.action.u.measurement.action_code) { case WLAN_ACTION_SPCT_MSR_REQ: + if (status->band != IEEE80211_BAND_5GHZ) + break; + if (len < (IEEE80211_MIN_ACTION_SIZE + sizeof(mgmt->u.action.u.measurement))) break; - ieee80211_process_measurement_req(sdata, mgmt, len); - goto handled; - case WLAN_ACTION_SPCT_CHL_SWITCH: + if (sdata->vif.type != NL80211_IFTYPE_STATION) break; - if (!ether_addr_equal(mgmt->bssid, sdata->u.mgd.bssid)) + ieee80211_process_measurement_req(sdata, mgmt, len); + goto handled; + case WLAN_ACTION_SPCT_CHL_SWITCH: { + u8 *bssid; + if (len < (IEEE80211_MIN_ACTION_SIZE + + sizeof(mgmt->u.action.u.chan_switch))) + break; + + if (sdata->vif.type != NL80211_IFTYPE_STATION && + sdata->vif.type != NL80211_IFTYPE_ADHOC) + break; + + if (sdata->vif.type == NL80211_IFTYPE_STATION) + bssid = sdata->u.mgd.bssid; + else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) + bssid = sdata->u.ibss.bssid; + else + break; + + if (!ether_addr_equal(mgmt->bssid, bssid)) break; goto queue; + } } break; case WLAN_CATEGORY_SA_QUERY: diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 102ce8adf2d1..4fcbf634b548 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2357,15 +2357,31 @@ static void ieee80211_update_csa(struct ieee80211_sub_if_data *sdata, struct probe_resp *resp; int counter_offset_beacon = sdata->csa_counter_offset_beacon; int counter_offset_presp = sdata->csa_counter_offset_presp; + u8 *beacon_data; + size_t beacon_data_len; - /* warn if the driver did not check for/react to csa completeness */ - if (WARN_ON(((u8 *)beacon->tail)[counter_offset_beacon] == 0)) + switch (sdata->vif.type) { + case NL80211_IFTYPE_AP: + beacon_data = beacon->tail; + beacon_data_len = beacon->tail_len; + break; + case NL80211_IFTYPE_ADHOC: + beacon_data = beacon->head; + beacon_data_len = beacon->head_len; + break; + default: + return; + } + if (WARN_ON(counter_offset_beacon >= beacon_data_len)) return; - ((u8 *)beacon->tail)[counter_offset_beacon]--; + /* warn if the driver did not check for/react to csa completeness */ + if (WARN_ON(beacon_data[counter_offset_beacon] == 0)) + return; - if (sdata->vif.type == NL80211_IFTYPE_AP && - counter_offset_presp) { + beacon_data[counter_offset_beacon]--; + + if (sdata->vif.type == NL80211_IFTYPE_AP && counter_offset_presp) { rcu_read_lock(); resp = rcu_dereference(sdata->u.ap.probe_resp); @@ -2400,6 +2416,15 @@ bool ieee80211_csa_is_complete(struct ieee80211_vif *vif) goto out; beacon_data = beacon->tail; beacon_data_len = beacon->tail_len; + } else if (vif->type == NL80211_IFTYPE_ADHOC) { + struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; + + beacon = rcu_dereference(ifibss->presp); + if (!beacon) + goto out; + + beacon_data = beacon->head; + beacon_data_len = beacon->head_len; } else { WARN_ON(1); goto out; @@ -2484,6 +2509,10 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, if (!presp) goto out; + if (sdata->vif.csa_active) + ieee80211_update_csa(sdata, presp); + + skb = dev_alloc_skb(local->tx_headroom + presp->head_len); if (!skb) goto out; From 9449410f3b30a27824aa02adec485e18b740b756 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 28 Aug 2013 13:41:32 +0200 Subject: [PATCH 11/61] mac80211: send a CSA action frame when changing channel IBSS members may not immediately be able to send out their beacon when performing CSA, therefore also send a CSA action frame. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: Johannes Berg --- net/mac80211/ibss.c | 60 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index c0042136f1d8..5ea9b3ae303e 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -428,6 +428,60 @@ static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, tsf, false); } +static int ieee80211_send_action_csa(struct ieee80211_sub_if_data *sdata, + struct cfg80211_csa_settings *csa_settings) +{ + struct sk_buff *skb; + struct ieee80211_mgmt *mgmt; + struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; + struct ieee80211_local *local = sdata->local; + int freq; + int hdr_len = offsetof(struct ieee80211_mgmt, u.action.u.chan_switch) + + sizeof(mgmt->u.action.u.chan_switch); + u8 *pos; + + skb = dev_alloc_skb(local->tx_headroom + hdr_len + + 5 + /* channel switch announcement element */ + 3); /* secondary channel offset element */ + if (!skb) + return -1; + + skb_reserve(skb, local->tx_headroom); + mgmt = (struct ieee80211_mgmt *)skb_put(skb, hdr_len); + memset(mgmt, 0, hdr_len); + mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_ACTION); + + eth_broadcast_addr(mgmt->da); + memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); + memcpy(mgmt->bssid, ifibss->bssid, ETH_ALEN); + mgmt->u.action.category = WLAN_CATEGORY_SPECTRUM_MGMT; + mgmt->u.action.u.chan_switch.action_code = WLAN_ACTION_SPCT_CHL_SWITCH; + pos = skb_put(skb, 5); + *pos++ = WLAN_EID_CHANNEL_SWITCH; /* EID */ + *pos++ = 3; /* IE length */ + *pos++ = csa_settings->block_tx ? 1 : 0; /* CSA mode */ + freq = csa_settings->chandef.chan->center_freq; + *pos++ = ieee80211_frequency_to_channel(freq); /* channel */ + *pos++ = csa_settings->count; /* count */ + + if (csa_settings->chandef.width == NL80211_CHAN_WIDTH_40) { + enum nl80211_channel_type ch_type; + + skb_put(skb, 3); + *pos++ = WLAN_EID_SECONDARY_CHANNEL_OFFSET; /* EID */ + *pos++ = 1; /* IE length */ + ch_type = cfg80211_get_chandef_type(&csa_settings->chandef); + if (ch_type == NL80211_CHAN_HT40PLUS) + *pos++ = IEEE80211_HT_PARAM_CHA_SEC_ABOVE; + else + *pos++ = IEEE80211_HT_PARAM_CHA_SEC_BELOW; + } + + ieee80211_tx_skb(sdata, skb); + return 0; +} + int ieee80211_ibss_csa_beacon(struct ieee80211_sub_if_data *sdata, struct cfg80211_csa_settings *csa_settings) { @@ -480,6 +534,12 @@ int ieee80211_ibss_csa_beacon(struct ieee80211_sub_if_data *sdata, if (old_presp) kfree_rcu(old_presp, rcu_head); + /* it might not send the beacon for a while. send an action frame + * immediately to announce the channel switch. + */ + if (csa_settings) + ieee80211_send_action_csa(sdata, csa_settings); + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON); out: return ret; From ee4bc9e75811d2c0cb5f2a2fc5b51ff037a01f47 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 28 Aug 2013 13:41:33 +0200 Subject: [PATCH 12/61] nl80211: enable IBSS support for channel switch announcements Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 49 +++++++++++++++++++++++++++++------------- 1 file changed, 34 insertions(+), 15 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index af8d84a4a5b2..ae617112b8f5 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -5634,15 +5634,26 @@ static int nl80211_channel_switch(struct sk_buff *skb, struct genl_info *info) static struct nlattr *csa_attrs[NL80211_ATTR_MAX+1]; u8 radar_detect_width = 0; int err; + bool need_new_beacon = false; if (!rdev->ops->channel_switch || !(rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH)) return -EOPNOTSUPP; - /* may add IBSS support later */ - if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP && - dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) + switch (dev->ieee80211_ptr->iftype) { + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_P2P_GO: + need_new_beacon = true; + + /* useless if AP is not running */ + if (!wdev->beacon_interval) + return -EINVAL; + break; + case NL80211_IFTYPE_ADHOC: + break; + default: return -EOPNOTSUPP; + } memset(¶ms, 0, sizeof(params)); @@ -5651,15 +5662,16 @@ static int nl80211_channel_switch(struct sk_buff *skb, struct genl_info *info) return -EINVAL; /* only important for AP, IBSS and mesh create IEs internally */ - if (!info->attrs[NL80211_ATTR_CSA_IES]) - return -EINVAL; - - /* useless if AP is not running */ - if (!wdev->beacon_interval) + if (need_new_beacon && + (!info->attrs[NL80211_ATTR_CSA_IES] || + !info->attrs[NL80211_ATTR_CSA_C_OFF_BEACON])) return -EINVAL; params.count = nla_get_u32(info->attrs[NL80211_ATTR_CH_SWITCH_COUNT]); + if (!need_new_beacon) + goto skip_beacons; + err = nl80211_parse_beacon(info->attrs, ¶ms.beacon_after); if (err) return err; @@ -5699,6 +5711,7 @@ static int nl80211_channel_switch(struct sk_buff *skb, struct genl_info *info) return -EINVAL; } +skip_beacons: err = nl80211_parse_chandef(rdev, info, ¶ms.chandef); if (err) return err; @@ -5706,12 +5719,17 @@ static int nl80211_channel_switch(struct sk_buff *skb, struct genl_info *info) if (!cfg80211_reg_can_beacon(&rdev->wiphy, ¶ms.chandef)) return -EINVAL; - err = cfg80211_chandef_dfs_required(wdev->wiphy, ¶ms.chandef); - if (err < 0) { - return err; - } else if (err) { - radar_detect_width = BIT(params.chandef.width); - params.radar_required = true; + /* DFS channels are only supported for AP/P2P GO ... for now. */ + if (dev->ieee80211_ptr->iftype == NL80211_IFTYPE_AP || + dev->ieee80211_ptr->iftype == NL80211_IFTYPE_P2P_GO) { + err = cfg80211_chandef_dfs_required(wdev->wiphy, + ¶ms.chandef); + if (err < 0) { + return err; + } else if (err) { + radar_detect_width = BIT(params.chandef.width); + params.radar_required = true; + } } err = cfg80211_can_use_iftype_chan(rdev, wdev, wdev->iftype, @@ -10740,7 +10758,8 @@ void cfg80211_ch_switch_notify(struct net_device *dev, wdev_lock(wdev); if (WARN_ON(wdev->iftype != NL80211_IFTYPE_AP && - wdev->iftype != NL80211_IFTYPE_P2P_GO)) + wdev->iftype != NL80211_IFTYPE_P2P_GO && + wdev->iftype != NL80211_IFTYPE_ADHOC)) goto out; wdev->channel = chandef->chan; From f364ef99a8e82ee27933d6a0cf5cc1f27e9f0df9 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 27 Aug 2013 12:40:15 +0300 Subject: [PATCH 13/61] mac80211: fix some snprintf misuses In some debugfs related functions snprintf was used while scnprintf should have been used instead. (blindly adding the return value of snprintf and supplying it to the next snprintf might result in buffer overflow when the input is too big) Signed-off-by: Eliad Peller Signed-off-by: Johannes Berg --- net/mac80211/debugfs.c | 55 ++++++++++++++++-------------- net/mac80211/rc80211_pid_debugfs.c | 26 +++++++------- net/wireless/debugfs.c | 22 ++++++------ 3 files changed, 54 insertions(+), 49 deletions(-) diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c index b0e32d628114..5c090e41d9bb 100644 --- a/net/mac80211/debugfs.c +++ b/net/mac80211/debugfs.c @@ -103,54 +103,57 @@ static ssize_t hwflags_read(struct file *file, char __user *user_buf, if (!buf) return 0; - sf += snprintf(buf, mxln - sf, "0x%x\n", local->hw.flags); + sf += scnprintf(buf, mxln - sf, "0x%x\n", local->hw.flags); if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) - sf += snprintf(buf + sf, mxln - sf, "HAS_RATE_CONTROL\n"); + sf += scnprintf(buf + sf, mxln - sf, "HAS_RATE_CONTROL\n"); if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS) - sf += snprintf(buf + sf, mxln - sf, "RX_INCLUDES_FCS\n"); + sf += scnprintf(buf + sf, mxln - sf, "RX_INCLUDES_FCS\n"); if (local->hw.flags & IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING) - sf += snprintf(buf + sf, mxln - sf, - "HOST_BCAST_PS_BUFFERING\n"); + sf += scnprintf(buf + sf, mxln - sf, + "HOST_BCAST_PS_BUFFERING\n"); if (local->hw.flags & IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE) - sf += snprintf(buf + sf, mxln - sf, - "2GHZ_SHORT_SLOT_INCAPABLE\n"); + sf += scnprintf(buf + sf, mxln - sf, + "2GHZ_SHORT_SLOT_INCAPABLE\n"); if (local->hw.flags & IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE) - sf += snprintf(buf + sf, mxln - sf, - "2GHZ_SHORT_PREAMBLE_INCAPABLE\n"); + sf += scnprintf(buf + sf, mxln - sf, + "2GHZ_SHORT_PREAMBLE_INCAPABLE\n"); if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC) - sf += snprintf(buf + sf, mxln - sf, "SIGNAL_UNSPEC\n"); + sf += scnprintf(buf + sf, mxln - sf, "SIGNAL_UNSPEC\n"); if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM) - sf += snprintf(buf + sf, mxln - sf, "SIGNAL_DBM\n"); + sf += scnprintf(buf + sf, mxln - sf, "SIGNAL_DBM\n"); if (local->hw.flags & IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC) - sf += snprintf(buf + sf, mxln - sf, "NEED_DTIM_BEFORE_ASSOC\n"); + sf += scnprintf(buf + sf, mxln - sf, + "NEED_DTIM_BEFORE_ASSOC\n"); if (local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT) - sf += snprintf(buf + sf, mxln - sf, "SPECTRUM_MGMT\n"); + sf += scnprintf(buf + sf, mxln - sf, "SPECTRUM_MGMT\n"); if (local->hw.flags & IEEE80211_HW_AMPDU_AGGREGATION) - sf += snprintf(buf + sf, mxln - sf, "AMPDU_AGGREGATION\n"); + sf += scnprintf(buf + sf, mxln - sf, "AMPDU_AGGREGATION\n"); if (local->hw.flags & IEEE80211_HW_SUPPORTS_PS) - sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_PS\n"); + sf += scnprintf(buf + sf, mxln - sf, "SUPPORTS_PS\n"); if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) - sf += snprintf(buf + sf, mxln - sf, "PS_NULLFUNC_STACK\n"); + sf += scnprintf(buf + sf, mxln - sf, "PS_NULLFUNC_STACK\n"); if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS) - sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_DYNAMIC_PS\n"); + sf += scnprintf(buf + sf, mxln - sf, "SUPPORTS_DYNAMIC_PS\n"); if (local->hw.flags & IEEE80211_HW_MFP_CAPABLE) - sf += snprintf(buf + sf, mxln - sf, "MFP_CAPABLE\n"); + sf += scnprintf(buf + sf, mxln - sf, "MFP_CAPABLE\n"); if (local->hw.flags & IEEE80211_HW_SUPPORTS_STATIC_SMPS) - sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_STATIC_SMPS\n"); + sf += scnprintf(buf + sf, mxln - sf, "SUPPORTS_STATIC_SMPS\n"); if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS) - sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_DYNAMIC_SMPS\n"); + sf += scnprintf(buf + sf, mxln - sf, + "SUPPORTS_DYNAMIC_SMPS\n"); if (local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD) - sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_UAPSD\n"); + sf += scnprintf(buf + sf, mxln - sf, "SUPPORTS_UAPSD\n"); if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) - sf += snprintf(buf + sf, mxln - sf, "REPORTS_TX_ACK_STATUS\n"); + sf += scnprintf(buf + sf, mxln - sf, + "REPORTS_TX_ACK_STATUS\n"); if (local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR) - sf += snprintf(buf + sf, mxln - sf, "CONNECTION_MONITOR\n"); + sf += scnprintf(buf + sf, mxln - sf, "CONNECTION_MONITOR\n"); if (local->hw.flags & IEEE80211_HW_SUPPORTS_PER_STA_GTK) - sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_PER_STA_GTK\n"); + sf += scnprintf(buf + sf, mxln - sf, "SUPPORTS_PER_STA_GTK\n"); if (local->hw.flags & IEEE80211_HW_AP_LINK_PS) - sf += snprintf(buf + sf, mxln - sf, "AP_LINK_PS\n"); + sf += scnprintf(buf + sf, mxln - sf, "AP_LINK_PS\n"); if (local->hw.flags & IEEE80211_HW_TX_AMPDU_SETUP_IN_HW) - sf += snprintf(buf + sf, mxln - sf, "TX_AMPDU_SETUP_IN_HW\n"); + sf += scnprintf(buf + sf, mxln - sf, "TX_AMPDU_SETUP_IN_HW\n"); rv = simple_read_from_buffer(user_buf, count, ppos, buf, strlen(buf)); kfree(buf); diff --git a/net/mac80211/rc80211_pid_debugfs.c b/net/mac80211/rc80211_pid_debugfs.c index c97a0657c043..6ff134650a84 100644 --- a/net/mac80211/rc80211_pid_debugfs.c +++ b/net/mac80211/rc80211_pid_debugfs.c @@ -167,29 +167,29 @@ static ssize_t rate_control_pid_events_read(struct file *file, char __user *buf, * provide large enough buffers. */ length = length < RC_PID_PRINT_BUF_SIZE ? length : RC_PID_PRINT_BUF_SIZE; - p = snprintf(pb, length, "%u %lu ", ev->id, ev->timestamp); + p = scnprintf(pb, length, "%u %lu ", ev->id, ev->timestamp); switch (ev->type) { case RC_PID_EVENT_TYPE_TX_STATUS: - p += snprintf(pb + p, length - p, "tx_status %u %u", - !(ev->data.flags & IEEE80211_TX_STAT_ACK), - ev->data.tx_status.status.rates[0].idx); + p += scnprintf(pb + p, length - p, "tx_status %u %u", + !(ev->data.flags & IEEE80211_TX_STAT_ACK), + ev->data.tx_status.status.rates[0].idx); break; case RC_PID_EVENT_TYPE_RATE_CHANGE: - p += snprintf(pb + p, length - p, "rate_change %d %d", - ev->data.index, ev->data.rate); + p += scnprintf(pb + p, length - p, "rate_change %d %d", + ev->data.index, ev->data.rate); break; case RC_PID_EVENT_TYPE_TX_RATE: - p += snprintf(pb + p, length - p, "tx_rate %d %d", - ev->data.index, ev->data.rate); + p += scnprintf(pb + p, length - p, "tx_rate %d %d", + ev->data.index, ev->data.rate); break; case RC_PID_EVENT_TYPE_PF_SAMPLE: - p += snprintf(pb + p, length - p, - "pf_sample %d %d %d %d", - ev->data.pf_sample, ev->data.prop_err, - ev->data.int_err, ev->data.der_err); + p += scnprintf(pb + p, length - p, + "pf_sample %d %d %d %d", + ev->data.pf_sample, ev->data.prop_err, + ev->data.int_err, ev->data.der_err); break; } - p += snprintf(pb + p, length - p, "\n"); + p += scnprintf(pb + p, length - p, "\n"); spin_unlock_irqrestore(&events->lock, status); diff --git a/net/wireless/debugfs.c b/net/wireless/debugfs.c index 90d050036624..454157717efa 100644 --- a/net/wireless/debugfs.c +++ b/net/wireless/debugfs.c @@ -47,17 +47,19 @@ static int ht_print_chan(struct ieee80211_channel *chan, return 0; if (chan->flags & IEEE80211_CHAN_DISABLED) - return snprintf(buf + offset, - buf_size - offset, - "%d Disabled\n", - chan->center_freq); + return scnprintf(buf + offset, + buf_size - offset, + "%d Disabled\n", + chan->center_freq); - return snprintf(buf + offset, - buf_size - offset, - "%d HT40 %c%c\n", - chan->center_freq, - (chan->flags & IEEE80211_CHAN_NO_HT40MINUS) ? ' ' : '-', - (chan->flags & IEEE80211_CHAN_NO_HT40PLUS) ? ' ' : '+'); + return scnprintf(buf + offset, + buf_size - offset, + "%d HT40 %c%c\n", + chan->center_freq, + (chan->flags & IEEE80211_CHAN_NO_HT40MINUS) ? + ' ' : '-', + (chan->flags & IEEE80211_CHAN_NO_HT40PLUS) ? + ' ' : '+'); } static ssize_t ht40allow_map_read(struct file *file, From 5eb7906b47dcd906b3ffd811e689e0de4a6b1b6a Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 29 Aug 2013 15:03:14 +0300 Subject: [PATCH 14/61] ieee80211: fix vht cap definitions VHT_CAP_BEAMFORMER_ANTENNAS cap is actually defined in the draft as VHT_CAP_BEAMFORMEE_STS_MAX, and its size is 3 bits long. VHT_CAP_SOUNDING_DIMENSIONS is also 3 bits long. Fix the definitions and change the cap masking accordingly. Signed-off-by: Eliad Peller Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 4 ++-- net/mac80211/vht.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index a5b598a79bec..7c1e1ebc0e23 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1391,8 +1391,8 @@ struct ieee80211_vht_operation { #define IEEE80211_VHT_CAP_RXSTBC_MASK 0x00000700 #define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800 #define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000 -#define IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX 0x00006000 -#define IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MAX 0x00030000 +#define IEEE80211_VHT_CAP_BEAMFORMEE_STS_MAX 0x0000e000 +#define IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MAX 0x00070000 #define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE 0x00080000 #define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE 0x00100000 #define IEEE80211_VHT_CAP_VHT_TXOP_PS 0x00200000 diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index 97c289414e32..de0112785aae 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -185,13 +185,13 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, if (own_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE) { vht_cap->cap |= cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | - IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX | IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MAX); } if (own_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE) vht_cap->cap |= cap_info & - IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE; + (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | + IEEE80211_VHT_CAP_BEAMFORMEE_STS_MAX); if (own_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE) vht_cap->cap |= cap_info & From 55fff50113daa178010a38e0dc27172f06d17b8e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 19 Aug 2013 18:48:41 +0200 Subject: [PATCH 15/61] mac80211: add explicit IBSS driver operations This can be useful for drivers if they have any failure cases when joining an IBSS. Also move setting the queue parameters to before this new call, in case the new driver op needs them already. Signed-off-by: Johannes Berg --- include/net/mac80211.h | 7 +++++++ net/mac80211/driver-ops.h | 27 +++++++++++++++++++++++++++ net/mac80211/ibss.c | 22 ++++++++++++++++++++-- net/mac80211/trace.h | 35 +++++++++++++++++++++++++++++++++++ 4 files changed, 89 insertions(+), 2 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 3411c59b636b..8cff800f7046 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2666,6 +2666,10 @@ enum ieee80211_roc_type { * zero using ieee80211_csa_is_complete() after the beacon has been * transmitted and then call ieee80211_csa_finish(). * + * @join_ibss: Join an IBSS (on an IBSS interface); this is called after all + * information in bss_conf is set up and the beacon can be retrieved. A + * channel context is bound before this is called. + * @leave_ibss: Leave the IBSS again. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, @@ -2857,6 +2861,9 @@ struct ieee80211_ops { void (*channel_switch_beacon)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct cfg80211_chan_def *chandef); + + int (*join_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); + void (*leave_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); }; /** diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index b3ea11f3d526..5d03c47c0a4c 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -1085,4 +1085,31 @@ drv_channel_switch_beacon(struct ieee80211_sub_if_data *sdata, } } +static inline int drv_join_ibss(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) +{ + int ret = 0; + + might_sleep(); + check_sdata_in_driver(sdata); + + trace_drv_join_ibss(local, sdata, &sdata->vif.bss_conf); + if (local->ops->join_ibss) + ret = local->ops->join_ibss(&local->hw, &sdata->vif); + trace_drv_return_int(local, ret); + return ret; +} + +static inline void drv_leave_ibss(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) +{ + might_sleep(); + check_sdata_in_driver(sdata); + + trace_drv_leave_ibss(local, sdata); + if (local->ops->leave_ibss) + local->ops->leave_ibss(&local->hw, &sdata->vif); + trace_drv_return_void(local); +} + #endif /* __MAC80211_DRIVER_OPS */ diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 5ea9b3ae303e..21a0b8835cb3 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -229,6 +229,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, struct beacon_data *presp; enum nl80211_bss_scan_width scan_width; bool have_higher_than_11mbit; + int err; sdata_assert_lock(sdata); @@ -247,6 +248,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IBSS | BSS_CHANGED_BEACON_ENABLED); + drv_leave_ibss(local, sdata); } presp = rcu_dereference_protected(ifibss->presp, @@ -329,11 +331,26 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, else sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE; + ieee80211_set_wmm_default(sdata, true); + sdata->vif.bss_conf.ibss_joined = true; sdata->vif.bss_conf.ibss_creator = creator; - ieee80211_bss_info_change_notify(sdata, bss_change); - ieee80211_set_wmm_default(sdata, true); + err = drv_join_ibss(local, sdata); + if (err) { + sdata->vif.bss_conf.ibss_joined = false; + sdata->vif.bss_conf.ibss_creator = false; + sdata->vif.bss_conf.enable_beacon = false; + sdata->vif.bss_conf.ssid_len = 0; + RCU_INIT_POINTER(ifibss->presp, NULL); + kfree_rcu(presp, rcu_head); + ieee80211_vif_release_channel(sdata); + sdata_info(sdata, "Failed to join IBSS, driver failure: %d\n", + err); + return; + } + + ieee80211_bss_info_change_notify(sdata, bss_change); ifibss->state = IEEE80211_IBSS_MLME_JOINED; mod_timer(&ifibss->timer, @@ -761,6 +778,7 @@ static void ieee80211_ibss_disconnect(struct ieee80211_sub_if_data *sdata) clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_IBSS); + drv_leave_ibss(local, sdata); ieee80211_vif_release_channel(sdata); } diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index 1aba645882bd..5d62c5804819 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -1475,6 +1475,41 @@ DEFINE_EVENT(local_sdata_evt, drv_ipv6_addr_change, ); #endif +TRACE_EVENT(drv_join_ibss, + TP_PROTO(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata, + struct ieee80211_bss_conf *info), + + TP_ARGS(local, sdata, info), + + TP_STRUCT__entry( + LOCAL_ENTRY + VIF_ENTRY + __field(u8, dtimper) + __field(u16, bcnint) + __dynamic_array(u8, ssid, info->ssid_len); + ), + + TP_fast_assign( + LOCAL_ASSIGN; + VIF_ASSIGN; + __entry->dtimper = info->dtim_period; + __entry->bcnint = info->beacon_int; + memcpy(__get_dynamic_array(ssid), info->ssid, info->ssid_len); + ), + + TP_printk( + LOCAL_PR_FMT VIF_PR_FMT, + LOCAL_PR_ARG, VIF_PR_ARG + ) +); + +DEFINE_EVENT(local_sdata_evt, drv_leave_ibss, + TP_PROTO(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata), + TP_ARGS(local, sdata) +); + /* * Tracing for API calls that drivers call. */ From f0823475d57a1ece4fe1eafb1aef5c4fa79361aa Mon Sep 17 00:00:00 2001 From: Janusz Dziedzic Date: Tue, 17 Sep 2013 08:25:36 +0200 Subject: [PATCH 16/61] cfg80211: parse dfs region for internal regdb option Add support for parsing and setting the dfs region (ETSI, FCC, JP) when the internal regulatory database is used. Before this the DFS region was being ignored even if present on the used db.txt Signed-off-by: Janusz Dziedzic Reviewed-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/genregdb.awk | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/wireless/genregdb.awk b/net/wireless/genregdb.awk index 9392f8cbb901..42ed274e81f4 100644 --- a/net/wireless/genregdb.awk +++ b/net/wireless/genregdb.awk @@ -46,6 +46,12 @@ BEGIN { sub(/:/, "", country) printf "static const struct ieee80211_regdomain regdom_%s = {\n", country printf "\t.alpha2 = \"%s\",\n", country + if ($NF ~ /DFS-ETSI/) + printf "\t.dfs_region = NL80211_DFS_ETSI,\n" + else if ($NF ~ /DFS-FCC/) + printf "\t.dfs_region = NL80211_DFS_FCC,\n" + else if ($NF ~ /DFS-JP/) + printf "\t.dfs_region = NL80211_DFS_JP,\n" printf "\t.reg_rules = {\n" active = 1 regdb = regdb "\t®dom_" country ",\n" From 15e230abaaa5a79feb25d1ef29b380e8b63aea0c Mon Sep 17 00:00:00 2001 From: Fred Zhou Date: Tue, 24 Sep 2013 10:33:01 +0800 Subject: [PATCH 17/61] mac80211: use exact-size allocation for authentication frame The authentication frame has a fixied size of 30 bytes (including header, algo num, trans seq num, and status) followed by a variable challenge text. Allocate using exact size, instead of over-allocation by sizeof(ieee80211_mgmt). Signed-off-by: Fred Zhou Signed-off-by: Johannes Berg --- net/mac80211/util.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 3c8283b9b45a..1fb31f94bf89 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1081,8 +1081,8 @@ void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt; int err; - skb = dev_alloc_skb(local->hw.extra_tx_headroom + - sizeof(*mgmt) + 6 + extra_len); + /* 24 + 6 = header + auth_algo + auth_transaction + status_code */ + skb = dev_alloc_skb(local->hw.extra_tx_headroom + 24 + 6 + extra_len); if (!skb) return; From 0cfcefef1945c6d3f24bce1c22937cfeae07eae8 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Mon, 23 Sep 2013 15:34:38 +0200 Subject: [PATCH 18/61] mac80211: support reporting A-MSDU subframes individually Some devices may not be able to report A-MSDUs in single buffers. Drivers for such devices were forced to re-assemble A-MSDUs which would then be eventually disassembled by mac80211. This could lead to CPU cache thrashing and poor performance. Since A-MSDU has a single sequence number all subframes share it. This was in conflict with retransmission/duplication recovery (IEEE802.11-2012: 9.3.2.10). Patch introduces a new flag that is meant to be set for all individually reported A-MSDU subframes except the last one. This ensures the last_seq_ctrl is updated after the last subframe is processed. If an A-MSDU is actually a duplicate transmission all reported subframes will be properly discarded. Signed-off-by: Michal Kazior [johannes: add braces that were missing even before] Signed-off-by: Johannes Berg --- include/net/mac80211.h | 10 ++++++++++ net/mac80211/rx.c | 3 ++- 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8cff800f7046..da8011920b65 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -829,6 +829,15 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * @RX_FLAG_STBC_MASK: STBC 2 bit bitmask. 1 - Nss=1, 2 - Nss=2, 3 - Nss=3 * @RX_FLAG_10MHZ: 10 MHz (half channel) was used * @RX_FLAG_5MHZ: 5 MHz (quarter channel) was used + * @RX_FLAG_AMSDU_MORE: Some drivers may prefer to report separate A-MSDU + * subframes instead of a one huge frame for performance reasons. + * All, but the last MSDU from an A-MSDU should have this flag set. E.g. + * if an A-MSDU has 3 frames, the first 2 must have the flag set, while + * the 3rd (last) one must not have this flag set. The flag is used to + * deal with retransmission/duplication recovery properly since A-MSDU + * subframes share the same sequence number. Reported subframes can be + * either regular MSDU or singly A-MSDUs. Subframes must not be + * interleaved with other frames. */ enum mac80211_rx_flags { RX_FLAG_MMIC_ERROR = BIT(0), @@ -859,6 +868,7 @@ enum mac80211_rx_flags { RX_FLAG_STBC_MASK = BIT(26) | BIT(27), RX_FLAG_10MHZ = BIT(28), RX_FLAG_5MHZ = BIT(29), + RX_FLAG_AMSDU_MORE = BIT(30), }; #define RX_FLAG_STBC_SHIFT 26 diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 8e908e17e248..f0247a43a75c 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -995,8 +995,9 @@ ieee80211_rx_h_check(struct ieee80211_rx_data *rx) rx->sta->num_duplicates++; } return RX_DROP_UNUSABLE; - } else + } else if (!(status->flag & RX_FLAG_AMSDU_MORE)) { rx->sta->last_seq_ctrl[rx->seqno_idx] = hdr->seq_ctrl; + } } if (unlikely(rx->skb->len < 16)) { From 1f4ffde845861acfe2eeaf6a2a965c02eecaad08 Mon Sep 17 00:00:00 2001 From: Fred Zhou Date: Mon, 9 Sep 2013 23:03:41 +0800 Subject: [PATCH 19/61] mac80211: improve default WMM parameter setting Move the default setting for WMM parameters outside the for loop to avoid redundant assignment multiple times. Signed-off-by: Fred Zhou Signed-off-by: Johannes Berg --- net/mac80211/util.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 1fb31f94bf89..550a6880625d 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1004,14 +1004,21 @@ void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata, */ enable_qos = (sdata->vif.type != NL80211_IFTYPE_STATION); - for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { - /* Set defaults according to 802.11-2007 Table 7-37 */ - aCWmax = 1023; - if (use_11b) - aCWmin = 31; - else - aCWmin = 15; + /* Set defaults according to 802.11-2007 Table 7-37 */ + aCWmax = 1023; + if (use_11b) + aCWmin = 31; + else + aCWmin = 15; + /* Confiure old 802.11b/g medium access rules. */ + qparam.cw_max = aCWmax; + qparam.cw_min = aCWmin; + qparam.txop = 0; + qparam.aifs = 2; + + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { + /* Update if QoS is enabled. */ if (enable_qos) { switch (ac) { case IEEE80211_AC_BK: @@ -1047,12 +1054,6 @@ void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata, qparam.aifs = 2; break; } - } else { - /* Confiure old 802.11b/g medium access rules. */ - qparam.cw_max = aCWmax; - qparam.cw_min = aCWmin; - qparam.txop = 0; - qparam.aifs = 2; } qparam.uapsd = false; From ff311bc11a7e2da95e1e17f99b7e4951c7060547 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Tue, 3 Sep 2013 19:43:18 +0200 Subject: [PATCH 20/61] nl80211: allow CAC only if no operation is going on A CAC should fail if it is triggered while the interface is already running. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index ae617112b8f5..2838206ddad3 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -5591,6 +5591,9 @@ static int nl80211_start_radar_detection(struct sk_buff *skb, if (err) return err; + if (netif_carrier_ok(dev)) + return -EBUSY; + if (wdev->cac_started) return -EBUSY; From 131a19bc924c32cecd014be7036686f2186b48ad Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 4 Mar 2013 20:54:46 +0100 Subject: [PATCH 21/61] regulatory: enable channels 52-64 and 100-144 for world roaming If allowed in a country, these channels typically require DFS so mark them as such. Channel 144 is a bit special, it's coming into use now to allow more VHT 80 channels, but world roaming with passive scanning is acceptable anyway. It seems fairly unlikely that it'll be used as the control channel for a VHT AP, but it needs to be present to allow a full VHT connection to an AP that uses it as one of the secondary channels. Also enable VHT 160 on these channels, and also for channels 36-48 to be able to use VHT 160 there. Signed-off-by: Johannes Berg --- net/wireless/reg.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index de06d5d1287f..d62cb1e91475 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -172,11 +172,21 @@ static const struct ieee80211_regdomain world_regdom = { NL80211_RRF_NO_IBSS | NL80211_RRF_NO_OFDM), /* IEEE 802.11a, channel 36..48 */ - REG_RULE(5180-10, 5240+10, 80, 6, 20, + REG_RULE(5180-10, 5240+10, 160, 6, 20, NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS), - /* NB: 5260 MHz - 5700 MHz requires DFS */ + /* IEEE 802.11a, channel 52..64 - DFS required */ + REG_RULE(5260-10, 5320+10, 160, 6, 20, + NL80211_RRF_PASSIVE_SCAN | + NL80211_RRF_NO_IBSS | + NL80211_RRF_DFS), + + /* IEEE 802.11a, channel 100..144 - DFS required */ + REG_RULE(5500-10, 5720+10, 160, 6, 20, + NL80211_RRF_PASSIVE_SCAN | + NL80211_RRF_NO_IBSS | + NL80211_RRF_DFS), /* IEEE 802.11a, channel 149..165 */ REG_RULE(5745-10, 5825+10, 80, 6, 20, From c6ca5e28bc005f109b2772765c62b4d4ec35c954 Mon Sep 17 00:00:00 2001 From: cedric Voncken Date: Mon, 26 Aug 2013 14:04:52 +0200 Subject: [PATCH 22/61] cfg80211: vlan priority handling in WMM If the VLAN tci is set in skb->vlan_tci use the priority field to determine the WMM priority. Signed-off-by: cedric Voncken Signed-off-by: Johannes Berg --- net/wireless/util.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/net/wireless/util.c b/net/wireless/util.c index ce090c1c5e4f..3c8be6104ba4 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -10,6 +10,7 @@ #include #include #include +#include #include "core.h" #include "rdev-ops.h" @@ -691,6 +692,7 @@ EXPORT_SYMBOL(ieee80211_amsdu_to_8023s); unsigned int cfg80211_classify8021d(struct sk_buff *skb) { unsigned int dscp; + unsigned char vlan_priority; /* skb->priority values from 256->263 are magic values to * directly indicate a specific 802.1d priority. This is used @@ -700,6 +702,13 @@ unsigned int cfg80211_classify8021d(struct sk_buff *skb) if (skb->priority >= 256 && skb->priority <= 263) return skb->priority - 256; + if (vlan_tx_tag_present(skb)) { + vlan_priority = (vlan_tx_tag_get(skb) & VLAN_PRIO_MASK) + >> VLAN_PRIO_SHIFT; + if (vlan_priority > 0) + return vlan_priority; + } + switch (skb->protocol) { case htons(ETH_P_IP): dscp = ipv4_get_dsfield(ip_hdr(skb)) & 0xfc; From 7578d57520f51093f590d68e16965e2714e69747 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Sun, 1 Sep 2013 17:15:51 +0300 Subject: [PATCH 23/61] mac80211: implement STA CSA for drivers using channel contexts Limit the current implementation to a single channel context used by a single vif, thereby avoiding multi-vif/channel complexities. Reuse the main function from AP CSA code, but move a portion out in order to fit the STA scenario. Add a new mac80211 HW flag so we don't break devices that don't support channel switch with channel-contexts. The new behavior will be opt-in. Signed-off-by: Arik Nemtsov Signed-off-by: Johannes Berg --- include/net/mac80211.h | 6 +++++ net/mac80211/cfg.c | 5 ++++ net/mac80211/chan.c | 5 ---- net/mac80211/mlme.c | 61 +++++++++++++++++++++++++++++++----------- 4 files changed, 56 insertions(+), 21 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index da8011920b65..f386c480e134 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1502,6 +1502,11 @@ struct ieee80211_tx_control { * * @IEEE80211_HW_TIMING_BEACON_ONLY: Use sync timing from beacon frames * only, to allow getting TBTT of a DTIM beacon. + * + * @IEEE80211_HW_CHANCTX_STA_CSA: Support 802.11h based channel-switch (CSA) + * for a single active channel while using channel contexts. When support + * is not enabled the default action is to disconnect when getting the + * CSA frame. */ enum ieee80211_hw_flags { IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, @@ -1532,6 +1537,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25, IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26, IEEE80211_HW_SUPPORTS_HT_CCK_RATES = 1<<27, + IEEE80211_HW_CHANCTX_STA_CSA = 1<<28, }; /** diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index b455e7264f4f..ac28af74a414 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2871,6 +2871,11 @@ void ieee80211_csa_finalize_work(struct work_struct *work) if (WARN_ON(err < 0)) return; + if (!local->use_chanctx) { + local->_oper_chandef = local->csa_chandef; + ieee80211_hw_config(local, 0); + } + ieee80211_bss_info_change_notify(sdata, changed); switch (sdata->vif.type) { diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 3a4764b2869e..03ba6b5c5373 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -453,11 +453,6 @@ int ieee80211_vif_change_channel(struct ieee80211_sub_if_data *sdata, chanctx_changed |= IEEE80211_CHANCTX_CHANGE_CHANNEL; drv_change_chanctx(local, ctx, chanctx_changed); - if (!local->use_chanctx) { - local->_oper_chandef = *chandef; - ieee80211_hw_config(local, 0); - } - ieee80211_recalc_chanctx_chantype(local, ctx); ieee80211_recalc_smps_chanctx(local, ctx); ieee80211_recalc_radar_chanctx(local, ctx); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 9fce0f49cd10..91cc8281e266 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -876,6 +876,8 @@ static void ieee80211_chswitch_work(struct work_struct *work) container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work); struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + u32 changed = 0; + int ret; if (!ieee80211_sdata_running(sdata)) return; @@ -884,24 +886,39 @@ static void ieee80211_chswitch_work(struct work_struct *work) if (!ifmgd->associated) goto out; - local->_oper_chandef = local->csa_chandef; + ret = ieee80211_vif_change_channel(sdata, &local->csa_chandef, + &changed); + if (ret) { + sdata_info(sdata, + "vif channel switch failed, disconnecting\n"); + ieee80211_queue_work(&sdata->local->hw, + &ifmgd->csa_connection_drop_work); + goto out; + } - if (!local->ops->channel_switch) { - /* call "hw_config" only if doing sw channel switch */ - ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); - } else { - /* update the device channel directly */ - local->hw.conf.chandef = local->_oper_chandef; + if (!local->use_chanctx) { + local->_oper_chandef = local->csa_chandef; + /* Call "hw_config" only if doing sw channel switch. + * Otherwise update the channel directly + */ + if (!local->ops->channel_switch) + ieee80211_hw_config(local, 0); + else + local->hw.conf.chandef = local->_oper_chandef; } /* XXX: shouldn't really modify cfg80211-owned data! */ - ifmgd->associated->channel = local->_oper_chandef.chan; + ifmgd->associated->channel = local->csa_chandef.chan; /* XXX: wait for a beacon first? */ ieee80211_wake_queues_by_reason(&local->hw, IEEE80211_MAX_QUEUE_MAP, IEEE80211_QUEUE_STOP_REASON_CSA); + + ieee80211_bss_info_change_notify(sdata, changed); + out: + sdata->vif.csa_active = false; ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED; sdata_unlock(sdata); } @@ -983,17 +1000,28 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, } ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED; - - if (local->use_chanctx) { - sdata_info(sdata, - "not handling channel switch with channel contexts\n"); - ieee80211_queue_work(&local->hw, - &ifmgd->csa_connection_drop_work); - return; - } + sdata->vif.csa_active = true; mutex_lock(&local->chanctx_mtx); + if (local->use_chanctx) { + u32 num_chanctx = 0; + list_for_each_entry(chanctx, &local->chanctx_list, list) + num_chanctx++; + + if (num_chanctx > 1 || + !(local->hw.flags & IEEE80211_HW_CHANCTX_STA_CSA)) { + sdata_info(sdata, + "not handling chan-switch with channel contexts\n"); + ieee80211_queue_work(&local->hw, + &ifmgd->csa_connection_drop_work); + mutex_unlock(&local->chanctx_mtx); + return; + } + } + if (WARN_ON(!rcu_access_pointer(sdata->vif.chanctx_conf))) { + ieee80211_queue_work(&local->hw, + &ifmgd->csa_connection_drop_work); mutex_unlock(&local->chanctx_mtx); return; } @@ -1955,6 +1983,7 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, true, frame_buf); ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED; + sdata->vif.csa_active = false; ieee80211_wake_queues_by_reason(&sdata->local->hw, IEEE80211_MAX_QUEUE_MAP, IEEE80211_QUEUE_STOP_REASON_CSA); From c856197d6e93907c0493bfecb4eb621318028e26 Mon Sep 17 00:00:00 2001 From: Peter Senna Tschudin Date: Sun, 22 Sep 2013 00:27:43 +0200 Subject: [PATCH 24/61] mwifiex: Change variable type to bool The variables cancel_scan_cmd, enable_data, hs_activate and valid are only assigned the values true and false. Change its type to bool. The simplified semantic patch that find this problem is as follows (http://coccinelle.lip6.fr/): @exists@ type T; identifier b; @@ - T + bool b = ...; ... when any b = \(true\|false\) Signed-off-by: Peter Senna Tschudin Acked-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cmdevt.c | 2 +- drivers/net/wireless/mwifiex/join.c | 2 +- drivers/net/wireless/mwifiex/sta_cmd.c | 2 +- drivers/net/wireless/mwifiex/wmm.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c index 2d761477d15e..fb3fa18390b8 100644 --- a/drivers/net/wireless/mwifiex/cmdevt.c +++ b/drivers/net/wireless/mwifiex/cmdevt.c @@ -1048,7 +1048,7 @@ mwifiex_cancel_pending_ioctl(struct mwifiex_adapter *adapter) struct cmd_ctrl_node *cmd_node = NULL, *tmp_node = NULL; unsigned long cmd_flags; unsigned long scan_pending_q_flags; - uint16_t cancel_scan_cmd = false; + bool cancel_scan_cmd = false; if ((adapter->curr_cmd) && (adapter->curr_cmd->wait_q_enabled)) { diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c index 9d7c0e6c4fc7..717fbe2e0e5a 100644 --- a/drivers/net/wireless/mwifiex/join.c +++ b/drivers/net/wireless/mwifiex/join.c @@ -621,7 +621,7 @@ int mwifiex_ret_802_11_associate(struct mwifiex_private *priv, int ret = 0; struct ieee_types_assoc_rsp *assoc_rsp; struct mwifiex_bssdescriptor *bss_desc; - u8 enable_data = true; + bool enable_data = true; u16 cap_info, status_code; assoc_rsp = (struct ieee_types_assoc_rsp *) &resp->params; diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c index c0268b597748..7d66018a2e33 100644 --- a/drivers/net/wireless/mwifiex/sta_cmd.c +++ b/drivers/net/wireless/mwifiex/sta_cmd.c @@ -327,7 +327,7 @@ mwifiex_cmd_802_11_hs_cfg(struct mwifiex_private *priv, { struct mwifiex_adapter *adapter = priv->adapter; struct host_cmd_ds_802_11_hs_cfg_enh *hs_cfg = &cmd->params.opt_hs_cfg; - u16 hs_activate = false; + bool hs_activate = false; if (!hscfg_param) /* New Activate command */ diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c index 2e8f9cdea54d..8f8fea015cb4 100644 --- a/drivers/net/wireless/mwifiex/wmm.c +++ b/drivers/net/wireless/mwifiex/wmm.c @@ -708,7 +708,7 @@ int mwifiex_ret_wmm_get_status(struct mwifiex_private *priv, { u8 *curr = (u8 *) &resp->params.get_wmm_status; uint16_t resp_len = le16_to_cpu(resp->size), tlv_len; - int valid = true; + bool valid = true; struct mwifiex_ie_types_data *tlv_hdr; struct mwifiex_ie_types_wmm_queue_status *tlv_wmm_qstatus; From 8e84c25821698bdef73c0329fb2022a4673b7adc Mon Sep 17 00:00:00 2001 From: Eugene Krasnikov Date: Tue, 8 Oct 2013 21:25:58 +0100 Subject: [PATCH 25/61] wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware This is a mac80211 driver for Qualcomm WCN3660/WCN3680 devices. So far WCN3660/WCN3680 is available only on MSM platform. Firmware can be found here: https://www.codeaurora.org/cgit/external/hisense/platform/vendor/qcom-opensource/wlan/prima/tree/firmware_bin?h=8130_CS Wiki page is available here: http://wireless.kernel.org/en/users/Drivers/wcn36xx A lot people made a contribution to this driver. Here is the list in alphabetical order: Eugene Krasnikov Kalle Valo Olof Johansson Pontus Fuchs Yanbo Li Signed-off-by: Eugene Krasnikov Signed-off-by: John W. Linville --- MAINTAINERS | 8 + drivers/net/wireless/ath/Kconfig | 1 + drivers/net/wireless/ath/Makefile | 1 + drivers/net/wireless/ath/wcn36xx/Kconfig | 16 + drivers/net/wireless/ath/wcn36xx/Makefile | 7 + drivers/net/wireless/ath/wcn36xx/debug.c | 188 + drivers/net/wireless/ath/wcn36xx/debug.h | 49 + drivers/net/wireless/ath/wcn36xx/dxe.c | 805 ++++ drivers/net/wireless/ath/wcn36xx/dxe.h | 284 ++ drivers/net/wireless/ath/wcn36xx/hal.h | 4657 ++++++++++++++++++++ drivers/net/wireless/ath/wcn36xx/main.c | 1036 +++++ drivers/net/wireless/ath/wcn36xx/pmc.c | 62 + drivers/net/wireless/ath/wcn36xx/pmc.h | 33 + drivers/net/wireless/ath/wcn36xx/smd.c | 2126 +++++++++ drivers/net/wireless/ath/wcn36xx/smd.h | 127 + drivers/net/wireless/ath/wcn36xx/txrx.c | 284 ++ drivers/net/wireless/ath/wcn36xx/txrx.h | 160 + drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 238 + 18 files changed, 10082 insertions(+) create mode 100644 drivers/net/wireless/ath/wcn36xx/Kconfig create mode 100644 drivers/net/wireless/ath/wcn36xx/Makefile create mode 100644 drivers/net/wireless/ath/wcn36xx/debug.c create mode 100644 drivers/net/wireless/ath/wcn36xx/debug.h create mode 100644 drivers/net/wireless/ath/wcn36xx/dxe.c create mode 100644 drivers/net/wireless/ath/wcn36xx/dxe.h create mode 100644 drivers/net/wireless/ath/wcn36xx/hal.h create mode 100644 drivers/net/wireless/ath/wcn36xx/main.c create mode 100644 drivers/net/wireless/ath/wcn36xx/pmc.c create mode 100644 drivers/net/wireless/ath/wcn36xx/pmc.h create mode 100644 drivers/net/wireless/ath/wcn36xx/smd.c create mode 100644 drivers/net/wireless/ath/wcn36xx/smd.h create mode 100644 drivers/net/wireless/ath/wcn36xx/txrx.c create mode 100644 drivers/net/wireless/ath/wcn36xx/txrx.h create mode 100644 drivers/net/wireless/ath/wcn36xx/wcn36xx.h diff --git a/MAINTAINERS b/MAINTAINERS index e61c2e83fc2b..da6cf1676f2c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6816,6 +6816,14 @@ L: linux-hexagon@vger.kernel.org S: Supported F: arch/hexagon/ +QUALCOMM WCN36XX WIRELESS DRIVER +M: Eugene Krasnikov +L: wcn36xx@lists.infradead.org +W: http://wireless.kernel.org/en/users/Drivers/wcn36xx +T: git git://github.com/KrasnikovEugene/wcn36xx.git +S: Supported +F: drivers/net/wireless/ath/wcn36xx/ + QUICKCAM PARALLEL PORT WEBCAMS M: Hans Verkuil L: linux-media@vger.kernel.org diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig index 1abf1d421173..ba81d6292eeb 100644 --- a/drivers/net/wireless/ath/Kconfig +++ b/drivers/net/wireless/ath/Kconfig @@ -32,5 +32,6 @@ source "drivers/net/wireless/ath/ath6kl/Kconfig" source "drivers/net/wireless/ath/ar5523/Kconfig" source "drivers/net/wireless/ath/wil6210/Kconfig" source "drivers/net/wireless/ath/ath10k/Kconfig" +source "drivers/net/wireless/ath/wcn36xx/Kconfig" endif diff --git a/drivers/net/wireless/ath/Makefile b/drivers/net/wireless/ath/Makefile index fb05cfd19361..363b05653c7e 100644 --- a/drivers/net/wireless/ath/Makefile +++ b/drivers/net/wireless/ath/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_ATH6KL) += ath6kl/ obj-$(CONFIG_AR5523) += ar5523/ obj-$(CONFIG_WIL6210) += wil6210/ obj-$(CONFIG_ATH10K) += ath10k/ +obj-$(CONFIG_WCN36XX) += wcn36xx/ obj-$(CONFIG_ATH_COMMON) += ath.o diff --git a/drivers/net/wireless/ath/wcn36xx/Kconfig b/drivers/net/wireless/ath/wcn36xx/Kconfig new file mode 100644 index 000000000000..591ebaea8265 --- /dev/null +++ b/drivers/net/wireless/ath/wcn36xx/Kconfig @@ -0,0 +1,16 @@ +config WCN36XX + tristate "Qualcomm Atheros WCN3660/3680 support" + depends on MAC80211 && HAS_DMA + ---help--- + This module adds support for wireless adapters based on + Qualcomm Atheros WCN3660 and WCN3680 mobile chipsets. + + If you choose to build a module, it'll be called wcn36xx. + +config WCN36XX_DEBUGFS + bool "WCN36XX debugfs support" + depends on WCN36XX + ---help--- + Enabled debugfs support + + If unsure, say Y to make it easier to debug problems. diff --git a/drivers/net/wireless/ath/wcn36xx/Makefile b/drivers/net/wireless/ath/wcn36xx/Makefile new file mode 100644 index 000000000000..50c43b4382ba --- /dev/null +++ b/drivers/net/wireless/ath/wcn36xx/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_WCN36XX) := wcn36xx.o +wcn36xx-y += main.o \ + dxe.o \ + txrx.o \ + smd.o \ + pmc.o \ + debug.o diff --git a/drivers/net/wireless/ath/wcn36xx/debug.c b/drivers/net/wireless/ath/wcn36xx/debug.c new file mode 100644 index 000000000000..682bcd650f70 --- /dev/null +++ b/drivers/net/wireless/ath/wcn36xx/debug.c @@ -0,0 +1,188 @@ +/* + * Copyright (c) 2013 Eugene Krasnikov + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include "wcn36xx.h" +#include "debug.h" +#include "pmc.h" + +#ifdef CONFIG_WCN36XX_DEBUGFS + +static int wcn36xx_debugfs_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + + return 0; +} + +static ssize_t read_file_bool_bmps(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct wcn36xx *wcn = file->private_data; + struct wcn36xx_vif *vif_priv = NULL; + struct ieee80211_vif *vif = NULL; + char buf[3]; + + list_for_each_entry(vif_priv, &wcn->vif_list, list) { + vif = container_of((void *)vif_priv, + struct ieee80211_vif, + drv_priv); + if (NL80211_IFTYPE_STATION == vif->type) { + if (vif_priv->pw_state == WCN36XX_BMPS) + buf[0] = '1'; + else + buf[0] = '0'; + break; + } + } + buf[1] = '\n'; + buf[2] = 0x00; + + return simple_read_from_buffer(user_buf, count, ppos, buf, 2); +} + +static ssize_t write_file_bool_bmps(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct wcn36xx *wcn = file->private_data; + struct wcn36xx_vif *vif_priv = NULL; + struct ieee80211_vif *vif = NULL; + + char buf[32]; + int buf_size; + + buf_size = min(count, (sizeof(buf)-1)); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + switch (buf[0]) { + case 'y': + case 'Y': + case '1': + list_for_each_entry(vif_priv, &wcn->vif_list, list) { + vif = container_of((void *)vif_priv, + struct ieee80211_vif, + drv_priv); + if (NL80211_IFTYPE_STATION == vif->type) { + wcn36xx_enable_keep_alive_null_packet(wcn, vif); + wcn36xx_pmc_enter_bmps_state(wcn, vif); + } + } + break; + case 'n': + case 'N': + case '0': + list_for_each_entry(vif_priv, &wcn->vif_list, list) { + vif = container_of((void *)vif_priv, + struct ieee80211_vif, + drv_priv); + if (NL80211_IFTYPE_STATION == vif->type) + wcn36xx_pmc_exit_bmps_state(wcn, vif); + } + break; + } + + return count; +} + +static const struct file_operations fops_wcn36xx_bmps = { + .open = wcn36xx_debugfs_open, + .read = read_file_bool_bmps, + .write = write_file_bool_bmps, +}; + +static ssize_t write_file_dump(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct wcn36xx *wcn = file->private_data; + char buf[255], *tmp; + int buf_size; + u32 arg[WCN36xx_MAX_DUMP_ARGS]; + int i; + + memset(buf, 0, sizeof(buf)); + memset(arg, 0, sizeof(arg)); + + buf_size = min(count, (sizeof(buf) - 1)); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + tmp = buf; + + for (i = 0; i < WCN36xx_MAX_DUMP_ARGS; i++) { + char *begin; + begin = strsep(&tmp, " "); + if (begin == NULL) + break; + + if (kstrtoul(begin, 0, (unsigned long *)(arg + i)) != 0) + break; + } + + wcn36xx_info("DUMP args is %d %d %d %d %d\n", arg[0], arg[1], arg[2], + arg[3], arg[4]); + wcn36xx_smd_dump_cmd_req(wcn, arg[0], arg[1], arg[2], arg[3], arg[4]); + + return count; +} + +static const struct file_operations fops_wcn36xx_dump = { + .open = wcn36xx_debugfs_open, + .write = write_file_dump, +}; + +#define ADD_FILE(name, mode, fop, priv_data) \ + do { \ + struct dentry *d; \ + d = debugfs_create_file(__stringify(name), \ + mode, dfs->rootdir, \ + priv_data, fop); \ + dfs->file_##name.dentry = d; \ + if (IS_ERR(d)) { \ + wcn36xx_warn("Create the debugfs entry failed");\ + dfs->file_##name.dentry = NULL; \ + } \ + } while (0) + + +void wcn36xx_debugfs_init(struct wcn36xx *wcn) +{ + struct wcn36xx_dfs_entry *dfs = &wcn->dfs; + + dfs->rootdir = debugfs_create_dir(KBUILD_MODNAME, + wcn->hw->wiphy->debugfsdir); + if (IS_ERR(dfs->rootdir)) { + wcn36xx_warn("Create the debugfs failed\n"); + dfs->rootdir = NULL; + } + + ADD_FILE(bmps_switcher, S_IRUSR | S_IWUSR, + &fops_wcn36xx_bmps, wcn); + ADD_FILE(dump, S_IWUSR, &fops_wcn36xx_dump, wcn); +} + +void wcn36xx_debugfs_exit(struct wcn36xx *wcn) +{ + struct wcn36xx_dfs_entry *dfs = &wcn->dfs; + debugfs_remove_recursive(dfs->rootdir); +} + +#endif /* CONFIG_WCN36XX_DEBUGFS */ diff --git a/drivers/net/wireless/ath/wcn36xx/debug.h b/drivers/net/wireless/ath/wcn36xx/debug.h new file mode 100644 index 000000000000..46307aa562d3 --- /dev/null +++ b/drivers/net/wireless/ath/wcn36xx/debug.h @@ -0,0 +1,49 @@ +/* + * Copyright (c) 2013 Eugene Krasnikov + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _WCN36XX_DEBUG_H_ +#define _WCN36XX_DEBUG_H_ + +#include + +#define WCN36xx_MAX_DUMP_ARGS 5 + +#ifdef CONFIG_WCN36XX_DEBUGFS +struct wcn36xx_dfs_file { + struct dentry *dentry; + u32 value; +}; + +struct wcn36xx_dfs_entry { + struct dentry *rootdir; + struct wcn36xx_dfs_file file_bmps_switcher; + struct wcn36xx_dfs_file file_dump; +}; + +void wcn36xx_debugfs_init(struct wcn36xx *wcn); +void wcn36xx_debugfs_exit(struct wcn36xx *wcn); + +#else +static inline void wcn36xx_debugfs_init(struct wcn36xx *wcn) +{ +} +static inline void wcn36xx_debugfs_exit(struct wcn36xx *wcn) +{ +} + +#endif /* CONFIG_WCN36XX_DEBUGFS */ + +#endif /* _WCN36XX_DEBUG_H_ */ diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c new file mode 100644 index 000000000000..ee25786b4447 --- /dev/null +++ b/drivers/net/wireless/ath/wcn36xx/dxe.c @@ -0,0 +1,805 @@ +/* + * Copyright (c) 2013 Eugene Krasnikov + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +/* DXE - DMA transfer engine + * we have 2 channels(High prio and Low prio) for TX and 2 channels for RX. + * through low channels data packets are transfered + * through high channels managment packets are transfered + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include "wcn36xx.h" +#include "txrx.h" + +void *wcn36xx_dxe_get_next_bd(struct wcn36xx *wcn, bool is_low) +{ + struct wcn36xx_dxe_ch *ch = is_low ? + &wcn->dxe_tx_l_ch : + &wcn->dxe_tx_h_ch; + + return ch->head_blk_ctl->bd_cpu_addr; +} + +static void wcn36xx_dxe_write_register(struct wcn36xx *wcn, int addr, int data) +{ + wcn36xx_dbg(WCN36XX_DBG_DXE, + "wcn36xx_dxe_write_register: addr=%x, data=%x\n", + addr, data); + + writel(data, wcn->mmio + addr); +} + +static void wcn36xx_dxe_read_register(struct wcn36xx *wcn, int addr, int *data) +{ + *data = readl(wcn->mmio + addr); + + wcn36xx_dbg(WCN36XX_DBG_DXE, + "wcn36xx_dxe_read_register: addr=%x, data=%x\n", + addr, *data); +} + +static void wcn36xx_dxe_free_ctl_block(struct wcn36xx_dxe_ch *ch) +{ + struct wcn36xx_dxe_ctl *ctl = ch->head_blk_ctl, *next; + int i; + + for (i = 0; i < ch->desc_num && ctl; i++) { + next = ctl->next; + kfree(ctl); + ctl = next; + } +} + +static int wcn36xx_dxe_allocate_ctl_block(struct wcn36xx_dxe_ch *ch) +{ + struct wcn36xx_dxe_ctl *prev_ctl = NULL; + struct wcn36xx_dxe_ctl *cur_ctl = NULL; + int i; + + for (i = 0; i < ch->desc_num; i++) { + cur_ctl = kzalloc(sizeof(*cur_ctl), GFP_KERNEL); + if (!cur_ctl) + goto out_fail; + + cur_ctl->ctl_blk_order = i; + if (i == 0) { + ch->head_blk_ctl = cur_ctl; + ch->tail_blk_ctl = cur_ctl; + } else if (ch->desc_num - 1 == i) { + prev_ctl->next = cur_ctl; + cur_ctl->next = ch->head_blk_ctl; + } else { + prev_ctl->next = cur_ctl; + } + prev_ctl = cur_ctl; + } + + return 0; + +out_fail: + wcn36xx_dxe_free_ctl_block(ch); + return -ENOMEM; +} + +int wcn36xx_dxe_alloc_ctl_blks(struct wcn36xx *wcn) +{ + int ret; + + wcn->dxe_tx_l_ch.ch_type = WCN36XX_DXE_CH_TX_L; + wcn->dxe_tx_h_ch.ch_type = WCN36XX_DXE_CH_TX_H; + wcn->dxe_rx_l_ch.ch_type = WCN36XX_DXE_CH_RX_L; + wcn->dxe_rx_h_ch.ch_type = WCN36XX_DXE_CH_RX_H; + + wcn->dxe_tx_l_ch.desc_num = WCN36XX_DXE_CH_DESC_NUMB_TX_L; + wcn->dxe_tx_h_ch.desc_num = WCN36XX_DXE_CH_DESC_NUMB_TX_H; + wcn->dxe_rx_l_ch.desc_num = WCN36XX_DXE_CH_DESC_NUMB_RX_L; + wcn->dxe_rx_h_ch.desc_num = WCN36XX_DXE_CH_DESC_NUMB_RX_H; + + wcn->dxe_tx_l_ch.dxe_wq = WCN36XX_DXE_WQ_TX_L; + wcn->dxe_tx_h_ch.dxe_wq = WCN36XX_DXE_WQ_TX_H; + + wcn->dxe_tx_l_ch.ctrl_bd = WCN36XX_DXE_CTRL_TX_L_BD; + wcn->dxe_tx_h_ch.ctrl_bd = WCN36XX_DXE_CTRL_TX_H_BD; + + wcn->dxe_tx_l_ch.ctrl_skb = WCN36XX_DXE_CTRL_TX_L_SKB; + wcn->dxe_tx_h_ch.ctrl_skb = WCN36XX_DXE_CTRL_TX_H_SKB; + + wcn->dxe_tx_l_ch.reg_ctrl = WCN36XX_DXE_REG_CTL_TX_L; + wcn->dxe_tx_h_ch.reg_ctrl = WCN36XX_DXE_REG_CTL_TX_H; + + wcn->dxe_tx_l_ch.def_ctrl = WCN36XX_DXE_CH_DEFAULT_CTL_TX_L; + wcn->dxe_tx_h_ch.def_ctrl = WCN36XX_DXE_CH_DEFAULT_CTL_TX_H; + + /* DXE control block allocation */ + ret = wcn36xx_dxe_allocate_ctl_block(&wcn->dxe_tx_l_ch); + if (ret) + goto out_err; + ret = wcn36xx_dxe_allocate_ctl_block(&wcn->dxe_tx_h_ch); + if (ret) + goto out_err; + ret = wcn36xx_dxe_allocate_ctl_block(&wcn->dxe_rx_l_ch); + if (ret) + goto out_err; + ret = wcn36xx_dxe_allocate_ctl_block(&wcn->dxe_rx_h_ch); + if (ret) + goto out_err; + + /* Initialize SMSM state Clear TX Enable RING EMPTY STATE */ + ret = wcn->ctrl_ops->smsm_change_state( + WCN36XX_SMSM_WLAN_TX_ENABLE, + WCN36XX_SMSM_WLAN_TX_RINGS_EMPTY); + + return 0; + +out_err: + wcn36xx_err("Failed to allocate DXE control blocks\n"); + wcn36xx_dxe_free_ctl_blks(wcn); + return -ENOMEM; +} + +void wcn36xx_dxe_free_ctl_blks(struct wcn36xx *wcn) +{ + wcn36xx_dxe_free_ctl_block(&wcn->dxe_tx_l_ch); + wcn36xx_dxe_free_ctl_block(&wcn->dxe_tx_h_ch); + wcn36xx_dxe_free_ctl_block(&wcn->dxe_rx_l_ch); + wcn36xx_dxe_free_ctl_block(&wcn->dxe_rx_h_ch); +} + +static int wcn36xx_dxe_init_descs(struct wcn36xx_dxe_ch *wcn_ch) +{ + struct wcn36xx_dxe_desc *cur_dxe = NULL; + struct wcn36xx_dxe_desc *prev_dxe = NULL; + struct wcn36xx_dxe_ctl *cur_ctl = NULL; + size_t size; + int i; + + size = wcn_ch->desc_num * sizeof(struct wcn36xx_dxe_desc); + wcn_ch->cpu_addr = dma_alloc_coherent(NULL, size, &wcn_ch->dma_addr, + GFP_KERNEL); + if (!wcn_ch->cpu_addr) + return -ENOMEM; + + memset(wcn_ch->cpu_addr, 0, size); + + cur_dxe = (struct wcn36xx_dxe_desc *)wcn_ch->cpu_addr; + cur_ctl = wcn_ch->head_blk_ctl; + + for (i = 0; i < wcn_ch->desc_num; i++) { + cur_ctl->desc = cur_dxe; + cur_ctl->desc_phy_addr = wcn_ch->dma_addr + + i * sizeof(struct wcn36xx_dxe_desc); + + switch (wcn_ch->ch_type) { + case WCN36XX_DXE_CH_TX_L: + cur_dxe->ctrl = WCN36XX_DXE_CTRL_TX_L; + cur_dxe->dst_addr_l = WCN36XX_DXE_WQ_TX_L; + break; + case WCN36XX_DXE_CH_TX_H: + cur_dxe->ctrl = WCN36XX_DXE_CTRL_TX_H; + cur_dxe->dst_addr_l = WCN36XX_DXE_WQ_TX_H; + break; + case WCN36XX_DXE_CH_RX_L: + cur_dxe->ctrl = WCN36XX_DXE_CTRL_RX_L; + cur_dxe->src_addr_l = WCN36XX_DXE_WQ_RX_L; + break; + case WCN36XX_DXE_CH_RX_H: + cur_dxe->ctrl = WCN36XX_DXE_CTRL_RX_H; + cur_dxe->src_addr_l = WCN36XX_DXE_WQ_RX_H; + break; + } + if (0 == i) { + cur_dxe->phy_next_l = 0; + } else if ((0 < i) && (i < wcn_ch->desc_num - 1)) { + prev_dxe->phy_next_l = + cur_ctl->desc_phy_addr; + } else if (i == (wcn_ch->desc_num - 1)) { + prev_dxe->phy_next_l = + cur_ctl->desc_phy_addr; + cur_dxe->phy_next_l = + wcn_ch->head_blk_ctl->desc_phy_addr; + } + cur_ctl = cur_ctl->next; + prev_dxe = cur_dxe; + cur_dxe++; + } + + return 0; +} + +static void wcn36xx_dxe_init_tx_bd(struct wcn36xx_dxe_ch *ch, + struct wcn36xx_dxe_mem_pool *pool) +{ + int i, chunk_size = pool->chunk_size; + dma_addr_t bd_phy_addr = pool->phy_addr; + void *bd_cpu_addr = pool->virt_addr; + struct wcn36xx_dxe_ctl *cur = ch->head_blk_ctl; + + for (i = 0; i < ch->desc_num; i++) { + /* Only every second dxe needs a bd pointer, + the other will point to the skb data */ + if (!(i & 1)) { + cur->bd_phy_addr = bd_phy_addr; + cur->bd_cpu_addr = bd_cpu_addr; + bd_phy_addr += chunk_size; + bd_cpu_addr += chunk_size; + } else { + cur->bd_phy_addr = 0; + cur->bd_cpu_addr = NULL; + } + cur = cur->next; + } +} + +static int wcn36xx_dxe_enable_ch_int(struct wcn36xx *wcn, u16 wcn_ch) +{ + int reg_data = 0; + + wcn36xx_dxe_read_register(wcn, + WCN36XX_DXE_INT_MASK_REG, + ®_data); + + reg_data |= wcn_ch; + + wcn36xx_dxe_write_register(wcn, + WCN36XX_DXE_INT_MASK_REG, + (int)reg_data); + return 0; +} + +static int wcn36xx_dxe_fill_skb(struct wcn36xx_dxe_ctl *ctl) +{ + struct wcn36xx_dxe_desc *dxe = ctl->desc; + struct sk_buff *skb; + + skb = alloc_skb(WCN36XX_PKT_SIZE, GFP_ATOMIC); + if (skb == NULL) + return -ENOMEM; + + dxe->dst_addr_l = dma_map_single(NULL, + skb_tail_pointer(skb), + WCN36XX_PKT_SIZE, + DMA_FROM_DEVICE); + ctl->skb = skb; + + return 0; +} + +static int wcn36xx_dxe_ch_alloc_skb(struct wcn36xx *wcn, + struct wcn36xx_dxe_ch *wcn_ch) +{ + int i; + struct wcn36xx_dxe_ctl *cur_ctl = NULL; + + cur_ctl = wcn_ch->head_blk_ctl; + + for (i = 0; i < wcn_ch->desc_num; i++) { + wcn36xx_dxe_fill_skb(cur_ctl); + cur_ctl = cur_ctl->next; + } + + return 0; +} + +static void wcn36xx_dxe_ch_free_skbs(struct wcn36xx *wcn, + struct wcn36xx_dxe_ch *wcn_ch) +{ + struct wcn36xx_dxe_ctl *cur = wcn_ch->head_blk_ctl; + int i; + + for (i = 0; i < wcn_ch->desc_num; i++) { + kfree_skb(cur->skb); + cur = cur->next; + } +} + +void wcn36xx_dxe_tx_ack_ind(struct wcn36xx *wcn, u32 status) +{ + struct ieee80211_tx_info *info; + struct sk_buff *skb; + unsigned long flags; + + spin_lock_irqsave(&wcn->dxe_lock, flags); + skb = wcn->tx_ack_skb; + wcn->tx_ack_skb = NULL; + spin_unlock_irqrestore(&wcn->dxe_lock, flags); + + if (!skb) { + wcn36xx_warn("Spurious TX complete indication\n"); + return; + } + + info = IEEE80211_SKB_CB(skb); + + if (status == 1) + info->flags |= IEEE80211_TX_STAT_ACK; + + wcn36xx_dbg(WCN36XX_DBG_DXE, "dxe tx ack status: %d\n", status); + + ieee80211_tx_status_irqsafe(wcn->hw, skb); + ieee80211_wake_queues(wcn->hw); +} + +static void reap_tx_dxes(struct wcn36xx *wcn, struct wcn36xx_dxe_ch *ch) +{ + struct wcn36xx_dxe_ctl *ctl = ch->tail_blk_ctl; + struct ieee80211_tx_info *info; + unsigned long flags; + + /* + * Make at least one loop of do-while because in case ring is + * completely full head and tail are pointing to the same element + * and while-do will not make any cycles. + */ + do { + if (ctl->skb) { + dma_unmap_single(NULL, ctl->desc->src_addr_l, + ctl->skb->len, DMA_TO_DEVICE); + info = IEEE80211_SKB_CB(ctl->skb); + if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)) { + /* Keep frame until TX status comes */ + ieee80211_free_txskb(wcn->hw, ctl->skb); + } + spin_lock_irqsave(&ctl->skb_lock, flags); + if (wcn->queues_stopped) { + wcn->queues_stopped = false; + ieee80211_wake_queues(wcn->hw); + } + spin_unlock_irqrestore(&ctl->skb_lock, flags); + + ctl->skb = NULL; + } + ctl = ctl->next; + } while (ctl != ch->head_blk_ctl && + !(ctl->desc->ctrl & WCN36XX_DXE_CTRL_VALID_MASK)); + + ch->tail_blk_ctl = ctl; +} + +static irqreturn_t wcn36xx_irq_tx_complete(int irq, void *dev) +{ + struct wcn36xx *wcn = (struct wcn36xx *)dev; + int int_src, int_reason; + + wcn36xx_dxe_read_register(wcn, WCN36XX_DXE_INT_SRC_RAW_REG, &int_src); + + if (int_src & WCN36XX_INT_MASK_CHAN_TX_H) { + wcn36xx_dxe_read_register(wcn, + WCN36XX_DXE_CH_STATUS_REG_ADDR_TX_H, + &int_reason); + + /* TODO: Check int_reason */ + + wcn36xx_dxe_write_register(wcn, + WCN36XX_DXE_0_INT_CLR, + WCN36XX_INT_MASK_CHAN_TX_H); + + wcn36xx_dxe_write_register(wcn, WCN36XX_DXE_0_INT_ED_CLR, + WCN36XX_INT_MASK_CHAN_TX_H); + wcn36xx_dbg(WCN36XX_DBG_DXE, "dxe tx ready high\n"); + reap_tx_dxes(wcn, &wcn->dxe_tx_h_ch); + } + + if (int_src & WCN36XX_INT_MASK_CHAN_TX_L) { + wcn36xx_dxe_read_register(wcn, + WCN36XX_DXE_CH_STATUS_REG_ADDR_TX_L, + &int_reason); + /* TODO: Check int_reason */ + + wcn36xx_dxe_write_register(wcn, + WCN36XX_DXE_0_INT_CLR, + WCN36XX_INT_MASK_CHAN_TX_L); + + wcn36xx_dxe_write_register(wcn, WCN36XX_DXE_0_INT_ED_CLR, + WCN36XX_INT_MASK_CHAN_TX_L); + wcn36xx_dbg(WCN36XX_DBG_DXE, "dxe tx ready low\n"); + reap_tx_dxes(wcn, &wcn->dxe_tx_l_ch); + } + + return IRQ_HANDLED; +} + +static irqreturn_t wcn36xx_irq_rx_ready(int irq, void *dev) +{ + struct wcn36xx *wcn = (struct wcn36xx *)dev; + + disable_irq_nosync(wcn->rx_irq); + wcn36xx_dxe_rx_frame(wcn); + enable_irq(wcn->rx_irq); + return IRQ_HANDLED; +} + +static int wcn36xx_dxe_request_irqs(struct wcn36xx *wcn) +{ + int ret; + + ret = request_irq(wcn->tx_irq, wcn36xx_irq_tx_complete, + IRQF_TRIGGER_HIGH, "wcn36xx_tx", wcn); + if (ret) { + wcn36xx_err("failed to alloc tx irq\n"); + goto out_err; + } + + ret = request_irq(wcn->rx_irq, wcn36xx_irq_rx_ready, IRQF_TRIGGER_HIGH, + "wcn36xx_rx", wcn); + if (ret) { + wcn36xx_err("failed to alloc rx irq\n"); + goto out_txirq; + } + + enable_irq_wake(wcn->rx_irq); + + return 0; + +out_txirq: + free_irq(wcn->tx_irq, wcn); +out_err: + return ret; + +} + +static int wcn36xx_rx_handle_packets(struct wcn36xx *wcn, + struct wcn36xx_dxe_ch *ch) +{ + struct wcn36xx_dxe_ctl *ctl = ch->head_blk_ctl; + struct wcn36xx_dxe_desc *dxe = ctl->desc; + dma_addr_t dma_addr; + struct sk_buff *skb; + + while (!(dxe->ctrl & WCN36XX_DXE_CTRL_VALID_MASK)) { + skb = ctl->skb; + dma_addr = dxe->dst_addr_l; + wcn36xx_dxe_fill_skb(ctl); + + switch (ch->ch_type) { + case WCN36XX_DXE_CH_RX_L: + dxe->ctrl = WCN36XX_DXE_CTRL_RX_L; + wcn36xx_dxe_write_register(wcn, WCN36XX_DXE_ENCH_ADDR, + WCN36XX_DXE_INT_CH1_MASK); + break; + case WCN36XX_DXE_CH_RX_H: + dxe->ctrl = WCN36XX_DXE_CTRL_RX_H; + wcn36xx_dxe_write_register(wcn, WCN36XX_DXE_ENCH_ADDR, + WCN36XX_DXE_INT_CH3_MASK); + break; + default: + wcn36xx_warn("Unknown channel\n"); + } + + dma_unmap_single(NULL, dma_addr, WCN36XX_PKT_SIZE, + DMA_FROM_DEVICE); + wcn36xx_rx_skb(wcn, skb); + ctl = ctl->next; + dxe = ctl->desc; + } + + ch->head_blk_ctl = ctl; + + return 0; +} + +void wcn36xx_dxe_rx_frame(struct wcn36xx *wcn) +{ + int int_src; + + wcn36xx_dxe_read_register(wcn, WCN36XX_DXE_INT_SRC_RAW_REG, &int_src); + + /* RX_LOW_PRI */ + if (int_src & WCN36XX_DXE_INT_CH1_MASK) { + wcn36xx_dxe_write_register(wcn, WCN36XX_DXE_0_INT_CLR, + WCN36XX_DXE_INT_CH1_MASK); + wcn36xx_rx_handle_packets(wcn, &(wcn->dxe_rx_l_ch)); + } + + /* RX_HIGH_PRI */ + if (int_src & WCN36XX_DXE_INT_CH3_MASK) { + /* Clean up all the INT within this channel */ + wcn36xx_dxe_write_register(wcn, WCN36XX_DXE_0_INT_CLR, + WCN36XX_DXE_INT_CH3_MASK); + wcn36xx_rx_handle_packets(wcn, &(wcn->dxe_rx_h_ch)); + } + + if (!int_src) + wcn36xx_warn("No DXE interrupt pending\n"); +} + +int wcn36xx_dxe_allocate_mem_pools(struct wcn36xx *wcn) +{ + size_t s; + void *cpu_addr; + + /* Allocate BD headers for MGMT frames */ + + /* Where this come from ask QC */ + wcn->mgmt_mem_pool.chunk_size = WCN36XX_BD_CHUNK_SIZE + + 16 - (WCN36XX_BD_CHUNK_SIZE % 8); + + s = wcn->mgmt_mem_pool.chunk_size * WCN36XX_DXE_CH_DESC_NUMB_TX_H; + cpu_addr = dma_alloc_coherent(NULL, s, &wcn->mgmt_mem_pool.phy_addr, + GFP_KERNEL); + if (!cpu_addr) + goto out_err; + + wcn->mgmt_mem_pool.virt_addr = cpu_addr; + memset(cpu_addr, 0, s); + + /* Allocate BD headers for DATA frames */ + + /* Where this come from ask QC */ + wcn->data_mem_pool.chunk_size = WCN36XX_BD_CHUNK_SIZE + + 16 - (WCN36XX_BD_CHUNK_SIZE % 8); + + s = wcn->data_mem_pool.chunk_size * WCN36XX_DXE_CH_DESC_NUMB_TX_L; + cpu_addr = dma_alloc_coherent(NULL, s, &wcn->data_mem_pool.phy_addr, + GFP_KERNEL); + if (!cpu_addr) + goto out_err; + + wcn->data_mem_pool.virt_addr = cpu_addr; + memset(cpu_addr, 0, s); + + return 0; + +out_err: + wcn36xx_dxe_free_mem_pools(wcn); + wcn36xx_err("Failed to allocate BD mempool\n"); + return -ENOMEM; +} + +void wcn36xx_dxe_free_mem_pools(struct wcn36xx *wcn) +{ + if (wcn->mgmt_mem_pool.virt_addr) + dma_free_coherent(NULL, wcn->mgmt_mem_pool.chunk_size * + WCN36XX_DXE_CH_DESC_NUMB_TX_H, + wcn->mgmt_mem_pool.virt_addr, + wcn->mgmt_mem_pool.phy_addr); + + if (wcn->data_mem_pool.virt_addr) { + dma_free_coherent(NULL, wcn->data_mem_pool.chunk_size * + WCN36XX_DXE_CH_DESC_NUMB_TX_L, + wcn->data_mem_pool.virt_addr, + wcn->data_mem_pool.phy_addr); + } +} + +int wcn36xx_dxe_tx_frame(struct wcn36xx *wcn, + struct wcn36xx_vif *vif_priv, + struct sk_buff *skb, + bool is_low) +{ + struct wcn36xx_dxe_ctl *ctl = NULL; + struct wcn36xx_dxe_desc *desc = NULL; + struct wcn36xx_dxe_ch *ch = NULL; + unsigned long flags; + + ch = is_low ? &wcn->dxe_tx_l_ch : &wcn->dxe_tx_h_ch; + + ctl = ch->head_blk_ctl; + + spin_lock_irqsave(&ctl->next->skb_lock, flags); + + /* + * If skb is not null that means that we reached the tail of the ring + * hence ring is full. Stop queues to let mac80211 back off until ring + * has an empty slot again. + */ + if (NULL != ctl->next->skb) { + ieee80211_stop_queues(wcn->hw); + wcn->queues_stopped = true; + spin_unlock_irqrestore(&ctl->next->skb_lock, flags); + return -EBUSY; + } + spin_unlock_irqrestore(&ctl->next->skb_lock, flags); + + ctl->skb = NULL; + desc = ctl->desc; + + /* Set source address of the BD we send */ + desc->src_addr_l = ctl->bd_phy_addr; + + desc->dst_addr_l = ch->dxe_wq; + desc->fr_len = sizeof(struct wcn36xx_tx_bd); + desc->ctrl = ch->ctrl_bd; + + wcn36xx_dbg(WCN36XX_DBG_DXE, "DXE TX\n"); + + wcn36xx_dbg_dump(WCN36XX_DBG_DXE_DUMP, "DESC1 >>> ", + (char *)desc, sizeof(*desc)); + wcn36xx_dbg_dump(WCN36XX_DBG_DXE_DUMP, + "BD >>> ", (char *)ctl->bd_cpu_addr, + sizeof(struct wcn36xx_tx_bd)); + + /* Set source address of the SKB we send */ + ctl = ctl->next; + ctl->skb = skb; + desc = ctl->desc; + if (ctl->bd_cpu_addr) { + wcn36xx_err("bd_cpu_addr cannot be NULL for skb DXE\n"); + return -EINVAL; + } + + desc->src_addr_l = dma_map_single(NULL, + ctl->skb->data, + ctl->skb->len, + DMA_TO_DEVICE); + + desc->dst_addr_l = ch->dxe_wq; + desc->fr_len = ctl->skb->len; + + /* set dxe descriptor to VALID */ + desc->ctrl = ch->ctrl_skb; + + wcn36xx_dbg_dump(WCN36XX_DBG_DXE_DUMP, "DESC2 >>> ", + (char *)desc, sizeof(*desc)); + wcn36xx_dbg_dump(WCN36XX_DBG_DXE_DUMP, "SKB >>> ", + (char *)ctl->skb->data, ctl->skb->len); + + /* Move the head of the ring to the next empty descriptor */ + ch->head_blk_ctl = ctl->next; + + /* + * When connected and trying to send data frame chip can be in sleep + * mode and writing to the register will not wake up the chip. Instead + * notify chip about new frame through SMSM bus. + */ + if (is_low && vif_priv->pw_state == WCN36XX_BMPS) { + wcn->ctrl_ops->smsm_change_state( + 0, + WCN36XX_SMSM_WLAN_TX_ENABLE); + } else { + /* indicate End Of Packet and generate interrupt on descriptor + * done. + */ + wcn36xx_dxe_write_register(wcn, + ch->reg_ctrl, ch->def_ctrl); + } + + return 0; +} + +int wcn36xx_dxe_init(struct wcn36xx *wcn) +{ + int reg_data = 0, ret; + + reg_data = WCN36XX_DXE_REG_RESET; + wcn36xx_dxe_write_register(wcn, WCN36XX_DXE_REG_CSR_RESET, reg_data); + + /* Setting interrupt path */ + reg_data = WCN36XX_DXE_CCU_INT; + wcn36xx_dxe_write_register(wcn, WCN36XX_DXE_REG_CCU_INT, reg_data); + + /***************************************/ + /* Init descriptors for TX LOW channel */ + /***************************************/ + wcn36xx_dxe_init_descs(&wcn->dxe_tx_l_ch); + wcn36xx_dxe_init_tx_bd(&wcn->dxe_tx_l_ch, &wcn->data_mem_pool); + + /* Write channel head to a NEXT register */ + wcn36xx_dxe_write_register(wcn, WCN36XX_DXE_CH_NEXT_DESC_ADDR_TX_L, + wcn->dxe_tx_l_ch.head_blk_ctl->desc_phy_addr); + + /* Program DMA destination addr for TX LOW */ + wcn36xx_dxe_write_register(wcn, + WCN36XX_DXE_CH_DEST_ADDR_TX_L, + WCN36XX_DXE_WQ_TX_L); + + wcn36xx_dxe_read_register(wcn, WCN36XX_DXE_REG_CH_EN, ®_data); + wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_TX_L); + + /***************************************/ + /* Init descriptors for TX HIGH channel */ + /***************************************/ + wcn36xx_dxe_init_descs(&wcn->dxe_tx_h_ch); + wcn36xx_dxe_init_tx_bd(&wcn->dxe_tx_h_ch, &wcn->mgmt_mem_pool); + + /* Write channel head to a NEXT register */ + wcn36xx_dxe_write_register(wcn, WCN36XX_DXE_CH_NEXT_DESC_ADDR_TX_H, + wcn->dxe_tx_h_ch.head_blk_ctl->desc_phy_addr); + + /* Program DMA destination addr for TX HIGH */ + wcn36xx_dxe_write_register(wcn, + WCN36XX_DXE_CH_DEST_ADDR_TX_H, + WCN36XX_DXE_WQ_TX_H); + + wcn36xx_dxe_read_register(wcn, WCN36XX_DXE_REG_CH_EN, ®_data); + + /* Enable channel interrupts */ + wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_TX_H); + + /***************************************/ + /* Init descriptors for RX LOW channel */ + /***************************************/ + wcn36xx_dxe_init_descs(&wcn->dxe_rx_l_ch); + + /* For RX we need to preallocated buffers */ + wcn36xx_dxe_ch_alloc_skb(wcn, &wcn->dxe_rx_l_ch); + + /* Write channel head to a NEXT register */ + wcn36xx_dxe_write_register(wcn, WCN36XX_DXE_CH_NEXT_DESC_ADDR_RX_L, + wcn->dxe_rx_l_ch.head_blk_ctl->desc_phy_addr); + + /* Write DMA source address */ + wcn36xx_dxe_write_register(wcn, + WCN36XX_DXE_CH_SRC_ADDR_RX_L, + WCN36XX_DXE_WQ_RX_L); + + /* Program preallocated destination address */ + wcn36xx_dxe_write_register(wcn, + WCN36XX_DXE_CH_DEST_ADDR_RX_L, + wcn->dxe_rx_l_ch.head_blk_ctl->desc->phy_next_l); + + /* Enable default control registers */ + wcn36xx_dxe_write_register(wcn, + WCN36XX_DXE_REG_CTL_RX_L, + WCN36XX_DXE_CH_DEFAULT_CTL_RX_L); + + /* Enable channel interrupts */ + wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_RX_L); + + /***************************************/ + /* Init descriptors for RX HIGH channel */ + /***************************************/ + wcn36xx_dxe_init_descs(&wcn->dxe_rx_h_ch); + + /* For RX we need to prealocat buffers */ + wcn36xx_dxe_ch_alloc_skb(wcn, &wcn->dxe_rx_h_ch); + + /* Write chanel head to a NEXT register */ + wcn36xx_dxe_write_register(wcn, WCN36XX_DXE_CH_NEXT_DESC_ADDR_RX_H, + wcn->dxe_rx_h_ch.head_blk_ctl->desc_phy_addr); + + /* Write DMA source address */ + wcn36xx_dxe_write_register(wcn, + WCN36XX_DXE_CH_SRC_ADDR_RX_H, + WCN36XX_DXE_WQ_RX_H); + + /* Program preallocated destination address */ + wcn36xx_dxe_write_register(wcn, + WCN36XX_DXE_CH_DEST_ADDR_RX_H, + wcn->dxe_rx_h_ch.head_blk_ctl->desc->phy_next_l); + + /* Enable default control registers */ + wcn36xx_dxe_write_register(wcn, + WCN36XX_DXE_REG_CTL_RX_H, + WCN36XX_DXE_CH_DEFAULT_CTL_RX_H); + + /* Enable channel interrupts */ + wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_RX_H); + + ret = wcn36xx_dxe_request_irqs(wcn); + if (ret < 0) + goto out_err; + + return 0; + +out_err: + return ret; +} + +void wcn36xx_dxe_deinit(struct wcn36xx *wcn) +{ + free_irq(wcn->tx_irq, wcn); + free_irq(wcn->rx_irq, wcn); + + if (wcn->tx_ack_skb) { + ieee80211_tx_status_irqsafe(wcn->hw, wcn->tx_ack_skb); + wcn->tx_ack_skb = NULL; + } + + wcn36xx_dxe_ch_free_skbs(wcn, &wcn->dxe_rx_l_ch); + wcn36xx_dxe_ch_free_skbs(wcn, &wcn->dxe_rx_h_ch); +} diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.h b/drivers/net/wireless/ath/wcn36xx/dxe.h new file mode 100644 index 000000000000..c88562f85de1 --- /dev/null +++ b/drivers/net/wireless/ath/wcn36xx/dxe.h @@ -0,0 +1,284 @@ +/* + * Copyright (c) 2013 Eugene Krasnikov + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _DXE_H_ +#define _DXE_H_ + +#include "wcn36xx.h" + +/* +TX_LOW = DMA0 +TX_HIGH = DMA4 +RX_LOW = DMA1 +RX_HIGH = DMA3 +H2H_TEST_RX_TX = DMA2 +*/ + +/* DXE registers */ +#define WCN36XX_DXE_MEM_BASE 0x03000000 +#define WCN36XX_DXE_MEM_REG 0x202000 + +#define WCN36XX_DXE_CCU_INT 0xA0011 +#define WCN36XX_DXE_REG_CCU_INT 0x200b10 + +/* TODO This must calculated properly but not hardcoded */ +#define WCN36XX_DXE_CTRL_TX_L 0x328a44 +#define WCN36XX_DXE_CTRL_TX_H 0x32ce44 +#define WCN36XX_DXE_CTRL_RX_L 0x12ad2f +#define WCN36XX_DXE_CTRL_RX_H 0x12d12f +#define WCN36XX_DXE_CTRL_TX_H_BD 0x30ce45 +#define WCN36XX_DXE_CTRL_TX_H_SKB 0x32ce4d +#define WCN36XX_DXE_CTRL_TX_L_BD 0x308a45 +#define WCN36XX_DXE_CTRL_TX_L_SKB 0x328a4d + +/* TODO This must calculated properly but not hardcoded */ +#define WCN36XX_DXE_WQ_TX_L 0x17 +#define WCN36XX_DXE_WQ_TX_H 0x17 +#define WCN36XX_DXE_WQ_RX_L 0xB +#define WCN36XX_DXE_WQ_RX_H 0x4 + +/* DXE descriptor control filed */ +#define WCN36XX_DXE_CTRL_VALID_MASK (0x00000001) + +/* TODO This must calculated properly but not hardcoded */ +/* DXE default control register values */ +#define WCN36XX_DXE_CH_DEFAULT_CTL_RX_L 0x847EAD2F +#define WCN36XX_DXE_CH_DEFAULT_CTL_RX_H 0x84FED12F +#define WCN36XX_DXE_CH_DEFAULT_CTL_TX_H 0x853ECF4D +#define WCN36XX_DXE_CH_DEFAULT_CTL_TX_L 0x843e8b4d + +/* Common DXE registers */ +#define WCN36XX_DXE_MEM_CSR (WCN36XX_DXE_MEM_REG + 0x00) +#define WCN36XX_DXE_REG_CSR_RESET (WCN36XX_DXE_MEM_REG + 0x00) +#define WCN36XX_DXE_ENCH_ADDR (WCN36XX_DXE_MEM_REG + 0x04) +#define WCN36XX_DXE_REG_CH_EN (WCN36XX_DXE_MEM_REG + 0x08) +#define WCN36XX_DXE_REG_CH_DONE (WCN36XX_DXE_MEM_REG + 0x0C) +#define WCN36XX_DXE_REG_CH_ERR (WCN36XX_DXE_MEM_REG + 0x10) +#define WCN36XX_DXE_INT_MASK_REG (WCN36XX_DXE_MEM_REG + 0x18) +#define WCN36XX_DXE_INT_SRC_RAW_REG (WCN36XX_DXE_MEM_REG + 0x20) + /* #define WCN36XX_DXE_INT_CH6_MASK 0x00000040 */ + /* #define WCN36XX_DXE_INT_CH5_MASK 0x00000020 */ + #define WCN36XX_DXE_INT_CH4_MASK 0x00000010 + #define WCN36XX_DXE_INT_CH3_MASK 0x00000008 + /* #define WCN36XX_DXE_INT_CH2_MASK 0x00000004 */ + #define WCN36XX_DXE_INT_CH1_MASK 0x00000002 + #define WCN36XX_DXE_INT_CH0_MASK 0x00000001 +#define WCN36XX_DXE_0_INT_CLR (WCN36XX_DXE_MEM_REG + 0x30) +#define WCN36XX_DXE_0_INT_ED_CLR (WCN36XX_DXE_MEM_REG + 0x34) +#define WCN36XX_DXE_0_INT_DONE_CLR (WCN36XX_DXE_MEM_REG + 0x38) +#define WCN36XX_DXE_0_INT_ERR_CLR (WCN36XX_DXE_MEM_REG + 0x3C) + +#define WCN36XX_DXE_0_CH0_STATUS (WCN36XX_DXE_MEM_REG + 0x404) +#define WCN36XX_DXE_0_CH1_STATUS (WCN36XX_DXE_MEM_REG + 0x444) +#define WCN36XX_DXE_0_CH2_STATUS (WCN36XX_DXE_MEM_REG + 0x484) +#define WCN36XX_DXE_0_CH3_STATUS (WCN36XX_DXE_MEM_REG + 0x4C4) +#define WCN36XX_DXE_0_CH4_STATUS (WCN36XX_DXE_MEM_REG + 0x504) + +#define WCN36XX_DXE_REG_RESET 0x5c89 + +/* Temporary BMU Workqueue 4 */ +#define WCN36XX_DXE_BMU_WQ_RX_LOW 0xB +#define WCN36XX_DXE_BMU_WQ_RX_HIGH 0x4 +/* DMA channel offset */ +#define WCN36XX_DXE_TX_LOW_OFFSET 0x400 +#define WCN36XX_DXE_TX_HIGH_OFFSET 0x500 +#define WCN36XX_DXE_RX_LOW_OFFSET 0x440 +#define WCN36XX_DXE_RX_HIGH_OFFSET 0x4C0 + +/* Address of the next DXE descriptor */ +#define WCN36XX_DXE_CH_NEXT_DESC_ADDR 0x001C +#define WCN36XX_DXE_CH_NEXT_DESC_ADDR_TX_L (WCN36XX_DXE_MEM_REG + \ + WCN36XX_DXE_TX_LOW_OFFSET + \ + WCN36XX_DXE_CH_NEXT_DESC_ADDR) +#define WCN36XX_DXE_CH_NEXT_DESC_ADDR_TX_H (WCN36XX_DXE_MEM_REG + \ + WCN36XX_DXE_TX_HIGH_OFFSET + \ + WCN36XX_DXE_CH_NEXT_DESC_ADDR) +#define WCN36XX_DXE_CH_NEXT_DESC_ADDR_RX_L (WCN36XX_DXE_MEM_REG + \ + WCN36XX_DXE_RX_LOW_OFFSET + \ + WCN36XX_DXE_CH_NEXT_DESC_ADDR) +#define WCN36XX_DXE_CH_NEXT_DESC_ADDR_RX_H (WCN36XX_DXE_MEM_REG + \ + WCN36XX_DXE_RX_HIGH_OFFSET + \ + WCN36XX_DXE_CH_NEXT_DESC_ADDR) + +/* DXE Descriptor source address */ +#define WCN36XX_DXE_CH_SRC_ADDR 0x000C +#define WCN36XX_DXE_CH_SRC_ADDR_RX_L (WCN36XX_DXE_MEM_REG + \ + WCN36XX_DXE_RX_LOW_OFFSET + \ + WCN36XX_DXE_CH_SRC_ADDR) +#define WCN36XX_DXE_CH_SRC_ADDR_RX_H (WCN36XX_DXE_MEM_REG + \ + WCN36XX_DXE_RX_HIGH_OFFSET + \ + WCN36XX_DXE_CH_SRC_ADDR) + +/* DXE Descriptor address destination address */ +#define WCN36XX_DXE_CH_DEST_ADDR 0x0014 +#define WCN36XX_DXE_CH_DEST_ADDR_TX_L (WCN36XX_DXE_MEM_REG + \ + WCN36XX_DXE_TX_LOW_OFFSET + \ + WCN36XX_DXE_CH_DEST_ADDR) +#define WCN36XX_DXE_CH_DEST_ADDR_TX_H (WCN36XX_DXE_MEM_REG + \ + WCN36XX_DXE_TX_HIGH_OFFSET + \ + WCN36XX_DXE_CH_DEST_ADDR) +#define WCN36XX_DXE_CH_DEST_ADDR_RX_L (WCN36XX_DXE_MEM_REG + \ + WCN36XX_DXE_RX_LOW_OFFSET + \ + WCN36XX_DXE_CH_DEST_ADDR) +#define WCN36XX_DXE_CH_DEST_ADDR_RX_H (WCN36XX_DXE_MEM_REG + \ + WCN36XX_DXE_RX_HIGH_OFFSET + \ + WCN36XX_DXE_CH_DEST_ADDR) + +/* Interrupt status */ +#define WCN36XX_DXE_CH_STATUS_REG_ADDR 0x0004 +#define WCN36XX_DXE_CH_STATUS_REG_ADDR_TX_L (WCN36XX_DXE_MEM_REG + \ + WCN36XX_DXE_TX_LOW_OFFSET + \ + WCN36XX_DXE_CH_STATUS_REG_ADDR) +#define WCN36XX_DXE_CH_STATUS_REG_ADDR_TX_H (WCN36XX_DXE_MEM_REG + \ + WCN36XX_DXE_TX_HIGH_OFFSET + \ + WCN36XX_DXE_CH_STATUS_REG_ADDR) +#define WCN36XX_DXE_CH_STATUS_REG_ADDR_RX_L (WCN36XX_DXE_MEM_REG + \ + WCN36XX_DXE_RX_LOW_OFFSET + \ + WCN36XX_DXE_CH_STATUS_REG_ADDR) +#define WCN36XX_DXE_CH_STATUS_REG_ADDR_RX_H (WCN36XX_DXE_MEM_REG + \ + WCN36XX_DXE_RX_HIGH_OFFSET + \ + WCN36XX_DXE_CH_STATUS_REG_ADDR) + + +/* DXE default control register */ +#define WCN36XX_DXE_REG_CTL_RX_L (WCN36XX_DXE_MEM_REG + \ + WCN36XX_DXE_RX_LOW_OFFSET) +#define WCN36XX_DXE_REG_CTL_RX_H (WCN36XX_DXE_MEM_REG + \ + WCN36XX_DXE_RX_HIGH_OFFSET) +#define WCN36XX_DXE_REG_CTL_TX_H (WCN36XX_DXE_MEM_REG + \ + WCN36XX_DXE_TX_HIGH_OFFSET) +#define WCN36XX_DXE_REG_CTL_TX_L (WCN36XX_DXE_MEM_REG + \ + WCN36XX_DXE_TX_LOW_OFFSET) + +#define WCN36XX_SMSM_WLAN_TX_ENABLE 0x00000400 +#define WCN36XX_SMSM_WLAN_TX_RINGS_EMPTY 0x00000200 + + +/* Interrupt control channel mask */ +#define WCN36XX_INT_MASK_CHAN_TX_L 0x00000001 +#define WCN36XX_INT_MASK_CHAN_RX_L 0x00000002 +#define WCN36XX_INT_MASK_CHAN_RX_H 0x00000008 +#define WCN36XX_INT_MASK_CHAN_TX_H 0x00000010 + +#define WCN36XX_BD_CHUNK_SIZE 128 + +#define WCN36XX_PKT_SIZE 0xF20 +enum wcn36xx_dxe_ch_type { + WCN36XX_DXE_CH_TX_L, + WCN36XX_DXE_CH_TX_H, + WCN36XX_DXE_CH_RX_L, + WCN36XX_DXE_CH_RX_H +}; + +/* amount of descriptors per channel */ +enum wcn36xx_dxe_ch_desc_num { + WCN36XX_DXE_CH_DESC_NUMB_TX_L = 128, + WCN36XX_DXE_CH_DESC_NUMB_TX_H = 10, + WCN36XX_DXE_CH_DESC_NUMB_RX_L = 512, + WCN36XX_DXE_CH_DESC_NUMB_RX_H = 40 +}; + +/** + * struct wcn36xx_dxe_desc - describes descriptor of one DXE buffer + * + * @ctrl: is a union that consists of following bits: + * union { + * u32 valid :1; //0 = DMA stop, 1 = DMA continue with this + * //descriptor + * u32 transfer_type :2; //0 = Host to Host space + * u32 eop :1; //End of Packet + * u32 bd_handling :1; //if transferType = Host to BMU, then 0 + * // means first 128 bytes contain BD, and 1 + * // means create new empty BD + * u32 siq :1; // SIQ + * u32 diq :1; // DIQ + * u32 pdu_rel :1; //0 = don't release BD and PDUs when done, + * // 1 = release them + * u32 bthld_sel :4; //BMU Threshold Select + * u32 prio :3; //Specifies the priority level to use for + * // the transfer + * u32 stop_channel :1; //1 = DMA stops processing further, channel + * //requires re-enabling after this + * u32 intr :1; //Interrupt on Descriptor Done + * u32 rsvd :1; //reserved + * u32 size :14;//14 bits used - ignored for BMU transfers, + * //only used for host to host transfers? + * } ctrl; + */ +struct wcn36xx_dxe_desc { + u32 ctrl; + u32 fr_len; + + u32 src_addr_l; + u32 dst_addr_l; + u32 phy_next_l; + u32 src_addr_h; + u32 dst_addr_h; + u32 phy_next_h; +} __packed; + +/* DXE Control block */ +struct wcn36xx_dxe_ctl { + struct wcn36xx_dxe_ctl *next; + struct wcn36xx_dxe_desc *desc; + unsigned int desc_phy_addr; + int ctl_blk_order; + struct sk_buff *skb; + spinlock_t skb_lock; + void *bd_cpu_addr; + dma_addr_t bd_phy_addr; +}; + +struct wcn36xx_dxe_ch { + enum wcn36xx_dxe_ch_type ch_type; + void *cpu_addr; + dma_addr_t dma_addr; + enum wcn36xx_dxe_ch_desc_num desc_num; + /* DXE control block ring */ + struct wcn36xx_dxe_ctl *head_blk_ctl; + struct wcn36xx_dxe_ctl *tail_blk_ctl; + + /* DXE channel specific configs */ + u32 dxe_wq; + u32 ctrl_bd; + u32 ctrl_skb; + u32 reg_ctrl; + u32 def_ctrl; +}; + +/* Memory Pool for BD headers */ +struct wcn36xx_dxe_mem_pool { + int chunk_size; + void *virt_addr; + dma_addr_t phy_addr; +}; + +struct wcn36xx_vif; +int wcn36xx_dxe_allocate_mem_pools(struct wcn36xx *wcn); +void wcn36xx_dxe_free_mem_pools(struct wcn36xx *wcn); +void wcn36xx_dxe_rx_frame(struct wcn36xx *wcn); +int wcn36xx_dxe_alloc_ctl_blks(struct wcn36xx *wcn); +void wcn36xx_dxe_free_ctl_blks(struct wcn36xx *wcn); +int wcn36xx_dxe_init(struct wcn36xx *wcn); +void wcn36xx_dxe_deinit(struct wcn36xx *wcn); +int wcn36xx_dxe_init_channels(struct wcn36xx *wcn); +int wcn36xx_dxe_tx_frame(struct wcn36xx *wcn, + struct wcn36xx_vif *vif_priv, + struct sk_buff *skb, + bool is_low); +void wcn36xx_dxe_tx_ack_ind(struct wcn36xx *wcn, u32 status); +void *wcn36xx_dxe_get_next_bd(struct wcn36xx *wcn, bool is_low); +#endif /* _DXE_H_ */ diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h new file mode 100644 index 000000000000..c02dbc618724 --- /dev/null +++ b/drivers/net/wireless/ath/wcn36xx/hal.h @@ -0,0 +1,4657 @@ +/* + * Copyright (c) 2013 Eugene Krasnikov + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _HAL_H_ +#define _HAL_H_ + +/*--------------------------------------------------------------------------- + API VERSIONING INFORMATION + + The RIVA API is versioned as MAJOR.MINOR.VERSION.REVISION + The MAJOR is incremented for major product/architecture changes + (and then MINOR/VERSION/REVISION are zeroed) + The MINOR is incremented for minor product/architecture changes + (and then VERSION/REVISION are zeroed) + The VERSION is incremented if a significant API change occurs + (and then REVISION is zeroed) + The REVISION is incremented if an insignificant API change occurs + or if a new API is added + All values are in the range 0..255 (ie they are 8-bit values) + ---------------------------------------------------------------------------*/ +#define WCN36XX_HAL_VER_MAJOR 1 +#define WCN36XX_HAL_VER_MINOR 4 +#define WCN36XX_HAL_VER_VERSION 1 +#define WCN36XX_HAL_VER_REVISION 2 + +/* This is to force compiler to use the maximum of an int ( 4 bytes ) */ +#define WCN36XX_HAL_MAX_ENUM_SIZE 0x7FFFFFFF +#define WCN36XX_HAL_MSG_TYPE_MAX_ENUM_SIZE 0x7FFF + +/* Max no. of transmit categories */ +#define STACFG_MAX_TC 8 + +/* The maximum value of access category */ +#define WCN36XX_HAL_MAX_AC 4 + +#define WCN36XX_HAL_IPV4_ADDR_LEN 4 + +#define WALN_HAL_STA_INVALID_IDX 0xFF +#define WCN36XX_HAL_BSS_INVALID_IDX 0xFF + +/* Default Beacon template size */ +#define BEACON_TEMPLATE_SIZE 0x180 + +/* Param Change Bitmap sent to HAL */ +#define PARAM_BCN_INTERVAL_CHANGED (1 << 0) +#define PARAM_SHORT_PREAMBLE_CHANGED (1 << 1) +#define PARAM_SHORT_SLOT_TIME_CHANGED (1 << 2) +#define PARAM_llACOEXIST_CHANGED (1 << 3) +#define PARAM_llBCOEXIST_CHANGED (1 << 4) +#define PARAM_llGCOEXIST_CHANGED (1 << 5) +#define PARAM_HT20MHZCOEXIST_CHANGED (1<<6) +#define PARAM_NON_GF_DEVICES_PRESENT_CHANGED (1<<7) +#define PARAM_RIFS_MODE_CHANGED (1<<8) +#define PARAM_LSIG_TXOP_FULL_SUPPORT_CHANGED (1<<9) +#define PARAM_OBSS_MODE_CHANGED (1<<10) +#define PARAM_BEACON_UPDATE_MASK \ + (PARAM_BCN_INTERVAL_CHANGED | \ + PARAM_SHORT_PREAMBLE_CHANGED | \ + PARAM_SHORT_SLOT_TIME_CHANGED | \ + PARAM_llACOEXIST_CHANGED | \ + PARAM_llBCOEXIST_CHANGED | \ + PARAM_llGCOEXIST_CHANGED | \ + PARAM_HT20MHZCOEXIST_CHANGED | \ + PARAM_NON_GF_DEVICES_PRESENT_CHANGED | \ + PARAM_RIFS_MODE_CHANGED | \ + PARAM_LSIG_TXOP_FULL_SUPPORT_CHANGED | \ + PARAM_OBSS_MODE_CHANGED) + +/* dump command response Buffer size */ +#define DUMPCMD_RSP_BUFFER 100 + +/* version string max length (including NULL) */ +#define WCN36XX_HAL_VERSION_LENGTH 64 + +/* message types for messages exchanged between WDI and HAL */ +enum wcn36xx_hal_host_msg_type { + /* Init/De-Init */ + WCN36XX_HAL_START_REQ = 0, + WCN36XX_HAL_START_RSP = 1, + WCN36XX_HAL_STOP_REQ = 2, + WCN36XX_HAL_STOP_RSP = 3, + + /* Scan */ + WCN36XX_HAL_INIT_SCAN_REQ = 4, + WCN36XX_HAL_INIT_SCAN_RSP = 5, + WCN36XX_HAL_START_SCAN_REQ = 6, + WCN36XX_HAL_START_SCAN_RSP = 7, + WCN36XX_HAL_END_SCAN_REQ = 8, + WCN36XX_HAL_END_SCAN_RSP = 9, + WCN36XX_HAL_FINISH_SCAN_REQ = 10, + WCN36XX_HAL_FINISH_SCAN_RSP = 11, + + /* HW STA configuration/deconfiguration */ + WCN36XX_HAL_CONFIG_STA_REQ = 12, + WCN36XX_HAL_CONFIG_STA_RSP = 13, + WCN36XX_HAL_DELETE_STA_REQ = 14, + WCN36XX_HAL_DELETE_STA_RSP = 15, + WCN36XX_HAL_CONFIG_BSS_REQ = 16, + WCN36XX_HAL_CONFIG_BSS_RSP = 17, + WCN36XX_HAL_DELETE_BSS_REQ = 18, + WCN36XX_HAL_DELETE_BSS_RSP = 19, + + /* Infra STA asscoiation */ + WCN36XX_HAL_JOIN_REQ = 20, + WCN36XX_HAL_JOIN_RSP = 21, + WCN36XX_HAL_POST_ASSOC_REQ = 22, + WCN36XX_HAL_POST_ASSOC_RSP = 23, + + /* Security */ + WCN36XX_HAL_SET_BSSKEY_REQ = 24, + WCN36XX_HAL_SET_BSSKEY_RSP = 25, + WCN36XX_HAL_SET_STAKEY_REQ = 26, + WCN36XX_HAL_SET_STAKEY_RSP = 27, + WCN36XX_HAL_RMV_BSSKEY_REQ = 28, + WCN36XX_HAL_RMV_BSSKEY_RSP = 29, + WCN36XX_HAL_RMV_STAKEY_REQ = 30, + WCN36XX_HAL_RMV_STAKEY_RSP = 31, + + /* Qos Related */ + WCN36XX_HAL_ADD_TS_REQ = 32, + WCN36XX_HAL_ADD_TS_RSP = 33, + WCN36XX_HAL_DEL_TS_REQ = 34, + WCN36XX_HAL_DEL_TS_RSP = 35, + WCN36XX_HAL_UPD_EDCA_PARAMS_REQ = 36, + WCN36XX_HAL_UPD_EDCA_PARAMS_RSP = 37, + WCN36XX_HAL_ADD_BA_REQ = 38, + WCN36XX_HAL_ADD_BA_RSP = 39, + WCN36XX_HAL_DEL_BA_REQ = 40, + WCN36XX_HAL_DEL_BA_RSP = 41, + + WCN36XX_HAL_CH_SWITCH_REQ = 42, + WCN36XX_HAL_CH_SWITCH_RSP = 43, + WCN36XX_HAL_SET_LINK_ST_REQ = 44, + WCN36XX_HAL_SET_LINK_ST_RSP = 45, + WCN36XX_HAL_GET_STATS_REQ = 46, + WCN36XX_HAL_GET_STATS_RSP = 47, + WCN36XX_HAL_UPDATE_CFG_REQ = 48, + WCN36XX_HAL_UPDATE_CFG_RSP = 49, + + WCN36XX_HAL_MISSED_BEACON_IND = 50, + WCN36XX_HAL_UNKNOWN_ADDR2_FRAME_RX_IND = 51, + WCN36XX_HAL_MIC_FAILURE_IND = 52, + WCN36XX_HAL_FATAL_ERROR_IND = 53, + WCN36XX_HAL_SET_KEYDONE_MSG = 54, + + /* NV Interface */ + WCN36XX_HAL_DOWNLOAD_NV_REQ = 55, + WCN36XX_HAL_DOWNLOAD_NV_RSP = 56, + + WCN36XX_HAL_ADD_BA_SESSION_REQ = 57, + WCN36XX_HAL_ADD_BA_SESSION_RSP = 58, + WCN36XX_HAL_TRIGGER_BA_REQ = 59, + WCN36XX_HAL_TRIGGER_BA_RSP = 60, + WCN36XX_HAL_UPDATE_BEACON_REQ = 61, + WCN36XX_HAL_UPDATE_BEACON_RSP = 62, + WCN36XX_HAL_SEND_BEACON_REQ = 63, + WCN36XX_HAL_SEND_BEACON_RSP = 64, + + WCN36XX_HAL_SET_BCASTKEY_REQ = 65, + WCN36XX_HAL_SET_BCASTKEY_RSP = 66, + WCN36XX_HAL_DELETE_STA_CONTEXT_IND = 67, + WCN36XX_HAL_UPDATE_PROBE_RSP_TEMPLATE_REQ = 68, + WCN36XX_HAL_UPDATE_PROBE_RSP_TEMPLATE_RSP = 69, + + /* PTT interface support */ + WCN36XX_HAL_PROCESS_PTT_REQ = 70, + WCN36XX_HAL_PROCESS_PTT_RSP = 71, + + /* BTAMP related events */ + WCN36XX_HAL_SIGNAL_BTAMP_EVENT_REQ = 72, + WCN36XX_HAL_SIGNAL_BTAMP_EVENT_RSP = 73, + WCN36XX_HAL_TL_HAL_FLUSH_AC_REQ = 74, + WCN36XX_HAL_TL_HAL_FLUSH_AC_RSP = 75, + + WCN36XX_HAL_ENTER_IMPS_REQ = 76, + WCN36XX_HAL_EXIT_IMPS_REQ = 77, + WCN36XX_HAL_ENTER_BMPS_REQ = 78, + WCN36XX_HAL_EXIT_BMPS_REQ = 79, + WCN36XX_HAL_ENTER_UAPSD_REQ = 80, + WCN36XX_HAL_EXIT_UAPSD_REQ = 81, + WCN36XX_HAL_UPDATE_UAPSD_PARAM_REQ = 82, + WCN36XX_HAL_CONFIGURE_RXP_FILTER_REQ = 83, + WCN36XX_HAL_ADD_BCN_FILTER_REQ = 84, + WCN36XX_HAL_REM_BCN_FILTER_REQ = 85, + WCN36XX_HAL_ADD_WOWL_BCAST_PTRN = 86, + WCN36XX_HAL_DEL_WOWL_BCAST_PTRN = 87, + WCN36XX_HAL_ENTER_WOWL_REQ = 88, + WCN36XX_HAL_EXIT_WOWL_REQ = 89, + WCN36XX_HAL_HOST_OFFLOAD_REQ = 90, + WCN36XX_HAL_SET_RSSI_THRESH_REQ = 91, + WCN36XX_HAL_GET_RSSI_REQ = 92, + WCN36XX_HAL_SET_UAPSD_AC_PARAMS_REQ = 93, + WCN36XX_HAL_CONFIGURE_APPS_CPU_WAKEUP_STATE_REQ = 94, + + WCN36XX_HAL_ENTER_IMPS_RSP = 95, + WCN36XX_HAL_EXIT_IMPS_RSP = 96, + WCN36XX_HAL_ENTER_BMPS_RSP = 97, + WCN36XX_HAL_EXIT_BMPS_RSP = 98, + WCN36XX_HAL_ENTER_UAPSD_RSP = 99, + WCN36XX_HAL_EXIT_UAPSD_RSP = 100, + WCN36XX_HAL_SET_UAPSD_AC_PARAMS_RSP = 101, + WCN36XX_HAL_UPDATE_UAPSD_PARAM_RSP = 102, + WCN36XX_HAL_CONFIGURE_RXP_FILTER_RSP = 103, + WCN36XX_HAL_ADD_BCN_FILTER_RSP = 104, + WCN36XX_HAL_REM_BCN_FILTER_RSP = 105, + WCN36XX_HAL_SET_RSSI_THRESH_RSP = 106, + WCN36XX_HAL_HOST_OFFLOAD_RSP = 107, + WCN36XX_HAL_ADD_WOWL_BCAST_PTRN_RSP = 108, + WCN36XX_HAL_DEL_WOWL_BCAST_PTRN_RSP = 109, + WCN36XX_HAL_ENTER_WOWL_RSP = 110, + WCN36XX_HAL_EXIT_WOWL_RSP = 111, + WCN36XX_HAL_RSSI_NOTIFICATION_IND = 112, + WCN36XX_HAL_GET_RSSI_RSP = 113, + WCN36XX_HAL_CONFIGURE_APPS_CPU_WAKEUP_STATE_RSP = 114, + + /* 11k related events */ + WCN36XX_HAL_SET_MAX_TX_POWER_REQ = 115, + WCN36XX_HAL_SET_MAX_TX_POWER_RSP = 116, + + /* 11R related msgs */ + WCN36XX_HAL_AGGR_ADD_TS_REQ = 117, + WCN36XX_HAL_AGGR_ADD_TS_RSP = 118, + + /* P2P WLAN_FEATURE_P2P */ + WCN36XX_HAL_SET_P2P_GONOA_REQ = 119, + WCN36XX_HAL_SET_P2P_GONOA_RSP = 120, + + /* WLAN Dump commands */ + WCN36XX_HAL_DUMP_COMMAND_REQ = 121, + WCN36XX_HAL_DUMP_COMMAND_RSP = 122, + + /* OEM_DATA FEATURE SUPPORT */ + WCN36XX_HAL_START_OEM_DATA_REQ = 123, + WCN36XX_HAL_START_OEM_DATA_RSP = 124, + + /* ADD SELF STA REQ and RSP */ + WCN36XX_HAL_ADD_STA_SELF_REQ = 125, + WCN36XX_HAL_ADD_STA_SELF_RSP = 126, + + /* DEL SELF STA SUPPORT */ + WCN36XX_HAL_DEL_STA_SELF_REQ = 127, + WCN36XX_HAL_DEL_STA_SELF_RSP = 128, + + /* Coex Indication */ + WCN36XX_HAL_COEX_IND = 129, + + /* Tx Complete Indication */ + WCN36XX_HAL_OTA_TX_COMPL_IND = 130, + + /* Host Suspend/resume messages */ + WCN36XX_HAL_HOST_SUSPEND_IND = 131, + WCN36XX_HAL_HOST_RESUME_REQ = 132, + WCN36XX_HAL_HOST_RESUME_RSP = 133, + + WCN36XX_HAL_SET_TX_POWER_REQ = 134, + WCN36XX_HAL_SET_TX_POWER_RSP = 135, + WCN36XX_HAL_GET_TX_POWER_REQ = 136, + WCN36XX_HAL_GET_TX_POWER_RSP = 137, + + WCN36XX_HAL_P2P_NOA_ATTR_IND = 138, + + WCN36XX_HAL_ENABLE_RADAR_DETECT_REQ = 139, + WCN36XX_HAL_ENABLE_RADAR_DETECT_RSP = 140, + WCN36XX_HAL_GET_TPC_REPORT_REQ = 141, + WCN36XX_HAL_GET_TPC_REPORT_RSP = 142, + WCN36XX_HAL_RADAR_DETECT_IND = 143, + WCN36XX_HAL_RADAR_DETECT_INTR_IND = 144, + WCN36XX_HAL_KEEP_ALIVE_REQ = 145, + WCN36XX_HAL_KEEP_ALIVE_RSP = 146, + + /* PNO messages */ + WCN36XX_HAL_SET_PREF_NETWORK_REQ = 147, + WCN36XX_HAL_SET_PREF_NETWORK_RSP = 148, + WCN36XX_HAL_SET_RSSI_FILTER_REQ = 149, + WCN36XX_HAL_SET_RSSI_FILTER_RSP = 150, + WCN36XX_HAL_UPDATE_SCAN_PARAM_REQ = 151, + WCN36XX_HAL_UPDATE_SCAN_PARAM_RSP = 152, + WCN36XX_HAL_PREF_NETW_FOUND_IND = 153, + + WCN36XX_HAL_SET_TX_PER_TRACKING_REQ = 154, + WCN36XX_HAL_SET_TX_PER_TRACKING_RSP = 155, + WCN36XX_HAL_TX_PER_HIT_IND = 156, + + WCN36XX_HAL_8023_MULTICAST_LIST_REQ = 157, + WCN36XX_HAL_8023_MULTICAST_LIST_RSP = 158, + + WCN36XX_HAL_SET_PACKET_FILTER_REQ = 159, + WCN36XX_HAL_SET_PACKET_FILTER_RSP = 160, + WCN36XX_HAL_PACKET_FILTER_MATCH_COUNT_REQ = 161, + WCN36XX_HAL_PACKET_FILTER_MATCH_COUNT_RSP = 162, + WCN36XX_HAL_CLEAR_PACKET_FILTER_REQ = 163, + WCN36XX_HAL_CLEAR_PACKET_FILTER_RSP = 164, + + /* + * This is temp fix. Should be removed once Host and Riva code is + * in sync. + */ + WCN36XX_HAL_INIT_SCAN_CON_REQ = 165, + + WCN36XX_HAL_SET_POWER_PARAMS_REQ = 166, + WCN36XX_HAL_SET_POWER_PARAMS_RSP = 167, + + WCN36XX_HAL_TSM_STATS_REQ = 168, + WCN36XX_HAL_TSM_STATS_RSP = 169, + + /* wake reason indication (WOW) */ + WCN36XX_HAL_WAKE_REASON_IND = 170, + + /* GTK offload support */ + WCN36XX_HAL_GTK_OFFLOAD_REQ = 171, + WCN36XX_HAL_GTK_OFFLOAD_RSP = 172, + WCN36XX_HAL_GTK_OFFLOAD_GETINFO_REQ = 173, + WCN36XX_HAL_GTK_OFFLOAD_GETINFO_RSP = 174, + + WCN36XX_HAL_FEATURE_CAPS_EXCHANGE_REQ = 175, + WCN36XX_HAL_FEATURE_CAPS_EXCHANGE_RSP = 176, + WCN36XX_HAL_EXCLUDE_UNENCRYPTED_IND = 177, + + WCN36XX_HAL_SET_THERMAL_MITIGATION_REQ = 178, + WCN36XX_HAL_SET_THERMAL_MITIGATION_RSP = 179, + + WCN36XX_HAL_UPDATE_VHT_OP_MODE_REQ = 182, + WCN36XX_HAL_UPDATE_VHT_OP_MODE_RSP = 183, + + WCN36XX_HAL_P2P_NOA_START_IND = 184, + + WCN36XX_HAL_GET_ROAM_RSSI_REQ = 185, + WCN36XX_HAL_GET_ROAM_RSSI_RSP = 186, + + WCN36XX_HAL_CLASS_B_STATS_IND = 187, + WCN36XX_HAL_DEL_BA_IND = 188, + WCN36XX_HAL_DHCP_START_IND = 189, + WCN36XX_HAL_DHCP_STOP_IND = 190, + + WCN36XX_HAL_MSG_MAX = WCN36XX_HAL_MSG_TYPE_MAX_ENUM_SIZE +}; + +/* Enumeration for Version */ +enum wcn36xx_hal_host_msg_version { + WCN36XX_HAL_MSG_VERSION0 = 0, + WCN36XX_HAL_MSG_VERSION1 = 1, + /* define as 2 bytes data */ + WCN36XX_HAL_MSG_WCNSS_CTRL_VERSION = 0x7FFF, + WCN36XX_HAL_MSG_VERSION_MAX_FIELD = WCN36XX_HAL_MSG_WCNSS_CTRL_VERSION +}; + +enum driver_type { + DRIVER_TYPE_PRODUCTION = 0, + DRIVER_TYPE_MFG = 1, + DRIVER_TYPE_DVT = 2, + DRIVER_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +enum wcn36xx_hal_stop_type { + HAL_STOP_TYPE_SYS_RESET, + HAL_STOP_TYPE_SYS_DEEP_SLEEP, + HAL_STOP_TYPE_RF_KILL, + HAL_STOP_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +enum wcn36xx_hal_sys_mode { + HAL_SYS_MODE_NORMAL, + HAL_SYS_MODE_LEARN, + HAL_SYS_MODE_SCAN, + HAL_SYS_MODE_PROMISC, + HAL_SYS_MODE_SUSPEND_LINK, + HAL_SYS_MODE_ROAM_SCAN, + HAL_SYS_MODE_ROAM_SUSPEND_LINK, + HAL_SYS_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +enum phy_chan_bond_state { + /* 20MHz IF bandwidth centered on IF carrier */ + PHY_SINGLE_CHANNEL_CENTERED = 0, + + /* 40MHz IF bandwidth with lower 20MHz supporting the primary channel */ + PHY_DOUBLE_CHANNEL_LOW_PRIMARY = 1, + + /* 40MHz IF bandwidth centered on IF carrier */ + PHY_DOUBLE_CHANNEL_CENTERED = 2, + + /* 40MHz IF bandwidth with higher 20MHz supporting the primary ch */ + PHY_DOUBLE_CHANNEL_HIGH_PRIMARY = 3, + + /* 20/40MHZ offset LOW 40/80MHZ offset CENTERED */ + PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_CENTERED = 4, + + /* 20/40MHZ offset CENTERED 40/80MHZ offset CENTERED */ + PHY_QUADRUPLE_CHANNEL_20MHZ_CENTERED_40MHZ_CENTERED = 5, + + /* 20/40MHZ offset HIGH 40/80MHZ offset CENTERED */ + PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_CENTERED = 6, + + /* 20/40MHZ offset LOW 40/80MHZ offset LOW */ + PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW = 7, + + /* 20/40MHZ offset HIGH 40/80MHZ offset LOW */ + PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_LOW = 8, + + /* 20/40MHZ offset LOW 40/80MHZ offset HIGH */ + PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH = 9, + + /* 20/40MHZ offset-HIGH 40/80MHZ offset HIGH */ + PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_HIGH = 10, + + PHY_CHANNEL_BONDING_STATE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +/* Spatial Multiplexing(SM) Power Save mode */ +enum wcn36xx_hal_ht_mimo_state { + /* Static SM Power Save mode */ + WCN36XX_HAL_HT_MIMO_PS_STATIC = 0, + + /* Dynamic SM Power Save mode */ + WCN36XX_HAL_HT_MIMO_PS_DYNAMIC = 1, + + /* reserved */ + WCN36XX_HAL_HT_MIMO_PS_NA = 2, + + /* SM Power Save disabled */ + WCN36XX_HAL_HT_MIMO_PS_NO_LIMIT = 3, + + WCN36XX_HAL_HT_MIMO_PS_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +/* each station added has a rate mode which specifies the sta attributes */ +enum sta_rate_mode { + STA_TAURUS = 0, + STA_TITAN, + STA_POLARIS, + STA_11b, + STA_11bg, + STA_11a, + STA_11n, + STA_11ac, + STA_INVALID_RATE_MODE = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +/* 1,2,5.5,11 */ +#define WCN36XX_HAL_NUM_DSSS_RATES 4 + +/* 6,9,12,18,24,36,48,54 */ +#define WCN36XX_HAL_NUM_OFDM_RATES 8 + +/* 72,96,108 */ +#define WCN36XX_HAL_NUM_POLARIS_RATES 3 + +#define WCN36XX_HAL_MAC_MAX_SUPPORTED_MCS_SET 16 + +enum wcn36xx_hal_bss_type { + WCN36XX_HAL_INFRASTRUCTURE_MODE, + + /* Added for softAP support */ + WCN36XX_HAL_INFRA_AP_MODE, + + WCN36XX_HAL_IBSS_MODE, + + /* Added for BT-AMP support */ + WCN36XX_HAL_BTAMP_STA_MODE, + + /* Added for BT-AMP support */ + WCN36XX_HAL_BTAMP_AP_MODE, + + WCN36XX_HAL_AUTO_MODE, + + WCN36XX_HAL_DONOT_USE_BSS_TYPE = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +enum wcn36xx_hal_nw_type { + WCN36XX_HAL_11A_NW_TYPE, + WCN36XX_HAL_11B_NW_TYPE, + WCN36XX_HAL_11G_NW_TYPE, + WCN36XX_HAL_11N_NW_TYPE, + WCN36XX_HAL_DONOT_USE_NW_TYPE = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +#define WCN36XX_HAL_MAC_RATESET_EID_MAX 12 + +enum wcn36xx_hal_ht_operating_mode { + /* No Protection */ + WCN36XX_HAL_HT_OP_MODE_PURE, + + /* Overlap Legacy device present, protection is optional */ + WCN36XX_HAL_HT_OP_MODE_OVERLAP_LEGACY, + + /* No legacy device, but 20 MHz HT present */ + WCN36XX_HAL_HT_OP_MODE_NO_LEGACY_20MHZ_HT, + + /* Protection is required */ + WCN36XX_HAL_HT_OP_MODE_MIXED, + + WCN36XX_HAL_HT_OP_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +/* Encryption type enum used with peer */ +enum ani_ed_type { + WCN36XX_HAL_ED_NONE, + WCN36XX_HAL_ED_WEP40, + WCN36XX_HAL_ED_WEP104, + WCN36XX_HAL_ED_TKIP, + WCN36XX_HAL_ED_CCMP, + WCN36XX_HAL_ED_WPI, + WCN36XX_HAL_ED_AES_128_CMAC, + WCN36XX_HAL_ED_NOT_IMPLEMENTED = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +#define WLAN_MAX_KEY_RSC_LEN 16 +#define WLAN_WAPI_KEY_RSC_LEN 16 + +/* MAX key length when ULA is used */ +#define WCN36XX_HAL_MAC_MAX_KEY_LENGTH 32 +#define WCN36XX_HAL_MAC_MAX_NUM_OF_DEFAULT_KEYS 4 + +/* + * Enum to specify whether key is used for TX only, RX only or both. + */ +enum ani_key_direction { + WCN36XX_HAL_TX_ONLY, + WCN36XX_HAL_RX_ONLY, + WCN36XX_HAL_TX_RX, + WCN36XX_HAL_TX_DEFAULT, + WCN36XX_HAL_DONOT_USE_KEY_DIRECTION = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +enum ani_wep_type { + WCN36XX_HAL_WEP_STATIC, + WCN36XX_HAL_WEP_DYNAMIC, + WCN36XX_HAL_WEP_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +enum wcn36xx_hal_link_state { + + WCN36XX_HAL_LINK_IDLE_STATE = 0, + WCN36XX_HAL_LINK_PREASSOC_STATE = 1, + WCN36XX_HAL_LINK_POSTASSOC_STATE = 2, + WCN36XX_HAL_LINK_AP_STATE = 3, + WCN36XX_HAL_LINK_IBSS_STATE = 4, + + /* BT-AMP Case */ + WCN36XX_HAL_LINK_BTAMP_PREASSOC_STATE = 5, + WCN36XX_HAL_LINK_BTAMP_POSTASSOC_STATE = 6, + WCN36XX_HAL_LINK_BTAMP_AP_STATE = 7, + WCN36XX_HAL_LINK_BTAMP_STA_STATE = 8, + + /* Reserved for HAL Internal Use */ + WCN36XX_HAL_LINK_LEARN_STATE = 9, + WCN36XX_HAL_LINK_SCAN_STATE = 10, + WCN36XX_HAL_LINK_FINISH_SCAN_STATE = 11, + WCN36XX_HAL_LINK_INIT_CAL_STATE = 12, + WCN36XX_HAL_LINK_FINISH_CAL_STATE = 13, + WCN36XX_HAL_LINK_LISTEN_STATE = 14, + + WCN36XX_HAL_LINK_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +enum wcn36xx_hal_stats_mask { + HAL_SUMMARY_STATS_INFO = 0x00000001, + HAL_GLOBAL_CLASS_A_STATS_INFO = 0x00000002, + HAL_GLOBAL_CLASS_B_STATS_INFO = 0x00000004, + HAL_GLOBAL_CLASS_C_STATS_INFO = 0x00000008, + HAL_GLOBAL_CLASS_D_STATS_INFO = 0x00000010, + HAL_PER_STA_STATS_INFO = 0x00000020 +}; + +/* BT-AMP events type */ +enum bt_amp_event_type { + BTAMP_EVENT_CONNECTION_START, + BTAMP_EVENT_CONNECTION_STOP, + BTAMP_EVENT_CONNECTION_TERMINATED, + + /* This and beyond are invalid values */ + BTAMP_EVENT_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE, +}; + +/* PE Statistics */ +enum pe_stats_mask { + PE_SUMMARY_STATS_INFO = 0x00000001, + PE_GLOBAL_CLASS_A_STATS_INFO = 0x00000002, + PE_GLOBAL_CLASS_B_STATS_INFO = 0x00000004, + PE_GLOBAL_CLASS_C_STATS_INFO = 0x00000008, + PE_GLOBAL_CLASS_D_STATS_INFO = 0x00000010, + PE_PER_STA_STATS_INFO = 0x00000020, + + /* This and beyond are invalid values */ + PE_STATS_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +/* + * Configuration Parameter IDs + */ +#define WCN36XX_HAL_CFG_STA_ID 0 +#define WCN36XX_HAL_CFG_CURRENT_TX_ANTENNA 1 +#define WCN36XX_HAL_CFG_CURRENT_RX_ANTENNA 2 +#define WCN36XX_HAL_CFG_LOW_GAIN_OVERRIDE 3 +#define WCN36XX_HAL_CFG_POWER_STATE_PER_CHAIN 4 +#define WCN36XX_HAL_CFG_CAL_PERIOD 5 +#define WCN36XX_HAL_CFG_CAL_CONTROL 6 +#define WCN36XX_HAL_CFG_PROXIMITY 7 +#define WCN36XX_HAL_CFG_NETWORK_DENSITY 8 +#define WCN36XX_HAL_CFG_MAX_MEDIUM_TIME 9 +#define WCN36XX_HAL_CFG_MAX_MPDUS_IN_AMPDU 10 +#define WCN36XX_HAL_CFG_RTS_THRESHOLD 11 +#define WCN36XX_HAL_CFG_SHORT_RETRY_LIMIT 12 +#define WCN36XX_HAL_CFG_LONG_RETRY_LIMIT 13 +#define WCN36XX_HAL_CFG_FRAGMENTATION_THRESHOLD 14 +#define WCN36XX_HAL_CFG_DYNAMIC_THRESHOLD_ZERO 15 +#define WCN36XX_HAL_CFG_DYNAMIC_THRESHOLD_ONE 16 +#define WCN36XX_HAL_CFG_DYNAMIC_THRESHOLD_TWO 17 +#define WCN36XX_HAL_CFG_FIXED_RATE 18 +#define WCN36XX_HAL_CFG_RETRYRATE_POLICY 19 +#define WCN36XX_HAL_CFG_RETRYRATE_SECONDARY 20 +#define WCN36XX_HAL_CFG_RETRYRATE_TERTIARY 21 +#define WCN36XX_HAL_CFG_FORCE_POLICY_PROTECTION 22 +#define WCN36XX_HAL_CFG_FIXED_RATE_MULTICAST_24GHZ 23 +#define WCN36XX_HAL_CFG_FIXED_RATE_MULTICAST_5GHZ 24 +#define WCN36XX_HAL_CFG_DEFAULT_RATE_INDEX_24GHZ 25 +#define WCN36XX_HAL_CFG_DEFAULT_RATE_INDEX_5GHZ 26 +#define WCN36XX_HAL_CFG_MAX_BA_SESSIONS 27 +#define WCN36XX_HAL_CFG_PS_DATA_INACTIVITY_TIMEOUT 28 +#define WCN36XX_HAL_CFG_PS_ENABLE_BCN_FILTER 29 +#define WCN36XX_HAL_CFG_PS_ENABLE_RSSI_MONITOR 30 +#define WCN36XX_HAL_CFG_NUM_BEACON_PER_RSSI_AVERAGE 31 +#define WCN36XX_HAL_CFG_STATS_PERIOD 32 +#define WCN36XX_HAL_CFG_CFP_MAX_DURATION 33 +#define WCN36XX_HAL_CFG_FRAME_TRANS_ENABLED 34 +#define WCN36XX_HAL_CFG_DTIM_PERIOD 35 +#define WCN36XX_HAL_CFG_EDCA_WMM_ACBK 36 +#define WCN36XX_HAL_CFG_EDCA_WMM_ACBE 37 +#define WCN36XX_HAL_CFG_EDCA_WMM_ACVO 38 +#define WCN36XX_HAL_CFG_EDCA_WMM_ACVI 39 +#define WCN36XX_HAL_CFG_BA_THRESHOLD_HIGH 40 +#define WCN36XX_HAL_CFG_MAX_BA_BUFFERS 41 +#define WCN36XX_HAL_CFG_RPE_POLLING_THRESHOLD 42 +#define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC0_REG 43 +#define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC1_REG 44 +#define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC2_REG 45 +#define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC3_REG 46 +#define WCN36XX_HAL_CFG_NO_OF_ONCHIP_REORDER_SESSIONS 47 +#define WCN36XX_HAL_CFG_PS_LISTEN_INTERVAL 48 +#define WCN36XX_HAL_CFG_PS_HEART_BEAT_THRESHOLD 49 +#define WCN36XX_HAL_CFG_PS_NTH_BEACON_FILTER 50 +#define WCN36XX_HAL_CFG_PS_MAX_PS_POLL 51 +#define WCN36XX_HAL_CFG_PS_MIN_RSSI_THRESHOLD 52 +#define WCN36XX_HAL_CFG_PS_RSSI_FILTER_PERIOD 53 +#define WCN36XX_HAL_CFG_PS_BROADCAST_FRAME_FILTER_ENABLE 54 +#define WCN36XX_HAL_CFG_PS_IGNORE_DTIM 55 +#define WCN36XX_HAL_CFG_PS_ENABLE_BCN_EARLY_TERM 56 +#define WCN36XX_HAL_CFG_DYNAMIC_PS_POLL_VALUE 57 +#define WCN36XX_HAL_CFG_PS_NULLDATA_AP_RESP_TIMEOUT 58 +#define WCN36XX_HAL_CFG_TELE_BCN_WAKEUP_EN 59 +#define WCN36XX_HAL_CFG_TELE_BCN_TRANS_LI 60 +#define WCN36XX_HAL_CFG_TELE_BCN_TRANS_LI_IDLE_BCNS 61 +#define WCN36XX_HAL_CFG_TELE_BCN_MAX_LI 62 +#define WCN36XX_HAL_CFG_TELE_BCN_MAX_LI_IDLE_BCNS 63 +#define WCN36XX_HAL_CFG_TX_PWR_CTRL_ENABLE 64 +#define WCN36XX_HAL_CFG_VALID_RADAR_CHANNEL_LIST 65 +#define WCN36XX_HAL_CFG_TX_POWER_24_20 66 +#define WCN36XX_HAL_CFG_TX_POWER_24_40 67 +#define WCN36XX_HAL_CFG_TX_POWER_50_20 68 +#define WCN36XX_HAL_CFG_TX_POWER_50_40 69 +#define WCN36XX_HAL_CFG_MCAST_BCAST_FILTER_SETTING 70 +#define WCN36XX_HAL_CFG_BCN_EARLY_TERM_WAKEUP_INTERVAL 71 +#define WCN36XX_HAL_CFG_MAX_TX_POWER_2_4 72 +#define WCN36XX_HAL_CFG_MAX_TX_POWER_5 73 +#define WCN36XX_HAL_CFG_INFRA_STA_KEEP_ALIVE_PERIOD 74 +#define WCN36XX_HAL_CFG_ENABLE_CLOSE_LOOP 75 +#define WCN36XX_HAL_CFG_BTC_EXECUTION_MODE 76 +#define WCN36XX_HAL_CFG_BTC_DHCP_BT_SLOTS_TO_BLOCK 77 +#define WCN36XX_HAL_CFG_BTC_A2DP_DHCP_BT_SUB_INTERVALS 78 +#define WCN36XX_HAL_CFG_PS_TX_INACTIVITY_TIMEOUT 79 +#define WCN36XX_HAL_CFG_WCNSS_API_VERSION 80 +#define WCN36XX_HAL_CFG_AP_KEEPALIVE_TIMEOUT 81 +#define WCN36XX_HAL_CFG_GO_KEEPALIVE_TIMEOUT 82 +#define WCN36XX_HAL_CFG_ENABLE_MC_ADDR_LIST 83 +#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_INQ_BT 84 +#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_PAGE_BT 85 +#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_CONN_BT 86 +#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_LE_BT 87 +#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_INQ_WLAN 88 +#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_PAGE_WLAN 89 +#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_CONN_WLAN 90 +#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_LE_WLAN 91 +#define WCN36XX_HAL_CFG_BTC_DYN_MAX_LEN_BT 92 +#define WCN36XX_HAL_CFG_BTC_DYN_MAX_LEN_WLAN 93 +#define WCN36XX_HAL_CFG_BTC_MAX_SCO_BLOCK_PERC 94 +#define WCN36XX_HAL_CFG_BTC_DHCP_PROT_ON_A2DP 95 +#define WCN36XX_HAL_CFG_BTC_DHCP_PROT_ON_SCO 96 +#define WCN36XX_HAL_CFG_ENABLE_UNICAST_FILTER 97 +#define WCN36XX_HAL_CFG_MAX_ASSOC_LIMIT 98 +#define WCN36XX_HAL_CFG_ENABLE_LPWR_IMG_TRANSITION 99 +#define WCN36XX_HAL_CFG_ENABLE_MCC_ADAPTIVE_SCHEDULER 100 +#define WCN36XX_HAL_CFG_ENABLE_DETECT_PS_SUPPORT 101 +#define WCN36XX_HAL_CFG_AP_LINK_MONITOR_TIMEOUT 102 +#define WCN36XX_HAL_CFG_BTC_DWELL_TIME_MULTIPLIER 103 +#define WCN36XX_HAL_CFG_ENABLE_TDLS_OXYGEN_MODE 104 +#define WCN36XX_HAL_CFG_MAX_PARAMS 105 + +/* Message definitons - All the messages below need to be packed */ + +/* Definition for HAL API Version. */ +struct wcnss_wlan_version { + u8 revision; + u8 version; + u8 minor; + u8 major; +} __packed; + +/* Definition for Encryption Keys */ +struct wcn36xx_hal_keys { + u8 id; + + /* 0 for multicast */ + u8 unicast; + + enum ani_key_direction direction; + + /* Usage is unknown */ + u8 rsc[WLAN_MAX_KEY_RSC_LEN]; + + /* =1 for authenticator,=0 for supplicant */ + u8 pae_role; + + u16 length; + u8 key[WCN36XX_HAL_MAC_MAX_KEY_LENGTH]; +} __packed; + +/* + * set_sta_key_params Moving here since it is shared by + * configbss/setstakey msgs + */ +struct wcn36xx_hal_set_sta_key_params { + /* STA Index */ + u16 sta_index; + + /* Encryption Type used with peer */ + enum ani_ed_type enc_type; + + /* STATIC/DYNAMIC - valid only for WEP */ + enum ani_wep_type wep_type; + + /* Default WEP key, valid only for static WEP, must between 0 and 3. */ + u8 def_wep_idx; + + /* valid only for non-static WEP encyrptions */ + struct wcn36xx_hal_keys key[WCN36XX_HAL_MAC_MAX_NUM_OF_DEFAULT_KEYS]; + + /* + * Control for Replay Count, 1= Single TID based replay count on Tx + * 0 = Per TID based replay count on TX + */ + u8 single_tid_rc; + +} __packed; + +/* 4-byte control message header used by HAL*/ +struct wcn36xx_hal_msg_header { + enum wcn36xx_hal_host_msg_type msg_type:16; + enum wcn36xx_hal_host_msg_version msg_version:16; + u32 len; +} __packed; + +/* Config format required by HAL for each CFG item*/ +struct wcn36xx_hal_cfg { + /* Cfg Id. The Id required by HAL is exported by HAL + * in shared header file between UMAC and HAL.*/ + u16 id; + + /* Length of the Cfg. This parameter is used to go to next cfg + * in the TLV format.*/ + u16 len; + + /* Padding bytes for unaligned address's */ + u16 pad_bytes; + + /* Reserve bytes for making cfgVal to align address */ + u16 reserve; + + /* Following the uCfgLen field there should be a 'uCfgLen' bytes + * containing the uCfgValue ; u8 uCfgValue[uCfgLen] */ +} __packed; + +struct wcn36xx_hal_mac_start_parameters { + /* Drive Type - Production or FTM etc */ + enum driver_type type; + + /* Length of the config buffer */ + u32 len; + + /* Following this there is a TLV formatted buffer of length + * "len" bytes containing all config values. + * The TLV is expected to be formatted like this: + * 0 15 31 31+CFG_LEN-1 length-1 + * | CFG_ID | CFG_LEN | CFG_BODY | CFG_ID |......| + */ +} __packed; + +struct wcn36xx_hal_mac_start_req_msg { + /* config buffer must start in TLV format just here */ + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_mac_start_parameters params; +} __packed; + +struct wcn36xx_hal_mac_start_rsp_params { + /* success or failure */ + u16 status; + + /* Max number of STA supported by the device */ + u8 stations; + + /* Max number of BSS supported by the device */ + u8 bssids; + + /* API Version */ + struct wcnss_wlan_version version; + + /* CRM build information */ + u8 crm_version[WCN36XX_HAL_VERSION_LENGTH]; + + /* hardware/chipset/misc version information */ + u8 wlan_version[WCN36XX_HAL_VERSION_LENGTH]; + +} __packed; + +struct wcn36xx_hal_mac_start_rsp_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_mac_start_rsp_params start_rsp_params; +} __packed; + +struct wcn36xx_hal_mac_stop_req_params { + /* The reason for which the device is being stopped */ + enum wcn36xx_hal_stop_type reason; + +} __packed; + +struct wcn36xx_hal_mac_stop_req_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_mac_stop_req_params stop_req_params; +} __packed; + +struct wcn36xx_hal_mac_stop_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +} __packed; + +struct wcn36xx_hal_update_cfg_req_msg { + /* + * Note: The length specified in tHalUpdateCfgReqMsg messages should be + * header.msgLen = sizeof(tHalUpdateCfgReqMsg) + uConfigBufferLen + */ + struct wcn36xx_hal_msg_header header; + + /* Length of the config buffer. Allows UMAC to update multiple CFGs */ + u32 len; + + /* + * Following this there is a TLV formatted buffer of length + * "uConfigBufferLen" bytes containing all config values. + * The TLV is expected to be formatted like this: + * 0 15 31 31+CFG_LEN-1 length-1 + * | CFG_ID | CFG_LEN | CFG_BODY | CFG_ID |......| + */ + +} __packed; + +struct wcn36xx_hal_update_cfg_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + +} __packed; + +/* Frame control field format (2 bytes) */ +struct wcn36xx_hal_mac_frame_ctl { + +#ifndef ANI_LITTLE_BIT_ENDIAN + + u8 subType:4; + u8 type:2; + u8 protVer:2; + + u8 order:1; + u8 wep:1; + u8 moreData:1; + u8 powerMgmt:1; + u8 retry:1; + u8 moreFrag:1; + u8 fromDS:1; + u8 toDS:1; + +#else + + u8 protVer:2; + u8 type:2; + u8 subType:4; + + u8 toDS:1; + u8 fromDS:1; + u8 moreFrag:1; + u8 retry:1; + u8 powerMgmt:1; + u8 moreData:1; + u8 wep:1; + u8 order:1; + +#endif + +}; + +/* Sequence control field */ +struct wcn36xx_hal_mac_seq_ctl { + u8 fragNum:4; + u8 seqNumLo:4; + u8 seqNumHi:8; +}; + +/* Management header format */ +struct wcn36xx_hal_mac_mgmt_hdr { + struct wcn36xx_hal_mac_frame_ctl fc; + u8 durationLo; + u8 durationHi; + u8 da[6]; + u8 sa[6]; + u8 bssId[6]; + struct wcn36xx_hal_mac_seq_ctl seqControl; +}; + +/* FIXME: pronto v1 apparently has 4 */ +#define WCN36XX_HAL_NUM_BSSID 2 + +/* Scan Entry to hold active BSS idx's */ +struct wcn36xx_hal_scan_entry { + u8 bss_index[WCN36XX_HAL_NUM_BSSID]; + u8 active_bss_count; +}; + +struct wcn36xx_hal_init_scan_req_msg { + struct wcn36xx_hal_msg_header header; + + /* LEARN - AP Role + SCAN - STA Role */ + enum wcn36xx_hal_sys_mode mode; + + /* BSSID of the BSS */ + u8 bssid[ETH_ALEN]; + + /* Whether BSS needs to be notified */ + u8 notify; + + /* Kind of frame to be used for notifying the BSS (Data Null, QoS + * Null, or CTS to Self). Must always be a valid frame type. */ + u8 frame_type; + + /* UMAC has the option of passing the MAC frame to be used for + * notifying the BSS. If non-zero, HAL will use the MAC frame + * buffer pointed to by macMgmtHdr. If zero, HAL will generate the + * appropriate MAC frame based on frameType. */ + u8 frame_len; + + /* Following the framelength there is a MAC frame buffer if + * frameLength is non-zero. */ + struct wcn36xx_hal_mac_mgmt_hdr mac_mgmt_hdr; + + /* Entry to hold number of active BSS idx's */ + struct wcn36xx_hal_scan_entry scan_entry; +}; + +struct wcn36xx_hal_init_scan_con_req_msg { + struct wcn36xx_hal_msg_header header; + + /* LEARN - AP Role + SCAN - STA Role */ + enum wcn36xx_hal_sys_mode mode; + + /* BSSID of the BSS */ + u8 bssid[ETH_ALEN]; + + /* Whether BSS needs to be notified */ + u8 notify; + + /* Kind of frame to be used for notifying the BSS (Data Null, QoS + * Null, or CTS to Self). Must always be a valid frame type. */ + u8 frame_type; + + /* UMAC has the option of passing the MAC frame to be used for + * notifying the BSS. If non-zero, HAL will use the MAC frame + * buffer pointed to by macMgmtHdr. If zero, HAL will generate the + * appropriate MAC frame based on frameType. */ + u8 frame_length; + + /* Following the framelength there is a MAC frame buffer if + * frameLength is non-zero. */ + struct wcn36xx_hal_mac_mgmt_hdr mac_mgmt_hdr; + + /* Entry to hold number of active BSS idx's */ + struct wcn36xx_hal_scan_entry scan_entry; + + /* Single NoA usage in Scanning */ + u8 use_noa; + + /* Indicates the scan duration (in ms) */ + u16 scan_duration; + +}; + +struct wcn36xx_hal_init_scan_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + +} __packed; + +struct wcn36xx_hal_start_scan_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Indicates the channel to scan */ + u8 scan_channel; +} __packed; + +struct wcn36xx_hal_start_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + u32 start_tsf[2]; + u8 tx_mgmt_power; + +} __packed; + +struct wcn36xx_hal_end_scan_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Indicates the channel to stop scanning. Not used really. But + * retained for symmetry with "start Scan" message. It can also + * help in error check if needed. */ + u8 scan_channel; +} __packed; + +struct wcn36xx_hal_end_scan_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +} __packed; + +struct wcn36xx_hal_finish_scan_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Identifies the operational state of the AP/STA + * LEARN - AP Role SCAN - STA Role */ + enum wcn36xx_hal_sys_mode mode; + + /* Operating channel to tune to. */ + u8 oper_channel; + + /* Channel Bonding state If 20/40 MHz is operational, this will + * indicate the 40 MHz extension channel in combination with the + * control channel */ + enum phy_chan_bond_state cb_state; + + /* BSSID of the BSS */ + u8 bssid[ETH_ALEN]; + + /* Whether BSS needs to be notified */ + u8 notify; + + /* Kind of frame to be used for notifying the BSS (Data Null, QoS + * Null, or CTS to Self). Must always be a valid frame type. */ + u8 frame_type; + + /* UMAC has the option of passing the MAC frame to be used for + * notifying the BSS. If non-zero, HAL will use the MAC frame + * buffer pointed to by macMgmtHdr. If zero, HAL will generate the + * appropriate MAC frame based on frameType. */ + u8 frame_length; + + /* Following the framelength there is a MAC frame buffer if + * frameLength is non-zero. */ + struct wcn36xx_hal_mac_mgmt_hdr mac_mgmt_hdr; + + /* Entry to hold number of active BSS idx's */ + struct wcn36xx_hal_scan_entry scan_entry; + +} __packed; + +struct wcn36xx_hal_finish_scan_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + +} __packed; + +enum wcn36xx_hal_rate_index { + HW_RATE_INDEX_1MBPS = 0x82, + HW_RATE_INDEX_2MBPS = 0x84, + HW_RATE_INDEX_5_5MBPS = 0x8B, + HW_RATE_INDEX_6MBPS = 0x0C, + HW_RATE_INDEX_9MBPS = 0x12, + HW_RATE_INDEX_11MBPS = 0x96, + HW_RATE_INDEX_12MBPS = 0x18, + HW_RATE_INDEX_18MBPS = 0x24, + HW_RATE_INDEX_24MBPS = 0x30, + HW_RATE_INDEX_36MBPS = 0x48, + HW_RATE_INDEX_48MBPS = 0x60, + HW_RATE_INDEX_54MBPS = 0x6C +}; + +struct wcn36xx_hal_supported_rates { + /* + * For Self STA Entry: this represents Self Mode. + * For Peer Stations, this represents the mode of the peer. + * On Station: + * + * --this mode is updated when PE adds the Self Entry. + * + * -- OR when PE sends 'ADD_BSS' message and station context in BSS + * is used to indicate the mode of the AP. + * + * ON AP: + * + * -- this mode is updated when PE sends 'ADD_BSS' and Sta entry + * for that BSS is used to indicate the self mode of the AP. + * + * -- OR when a station is associated, PE sends 'ADD_STA' message + * with this mode updated. + */ + + enum sta_rate_mode op_rate_mode; + + /* 11b, 11a and aniLegacyRates are IE rates which gives rate in + * unit of 500Kbps */ + u16 dsss_rates[WCN36XX_HAL_NUM_DSSS_RATES]; + u16 ofdm_rates[WCN36XX_HAL_NUM_OFDM_RATES]; + u16 legacy_rates[WCN36XX_HAL_NUM_POLARIS_RATES]; + u16 reserved; + + /* Taurus only supports 26 Titan Rates(no ESF/concat Rates will be + * supported) First 26 bits are reserved for those Titan rates and + * the last 4 bits(bit28-31) for Taurus, 2(bit26-27) bits are + * reserved. */ + /* Titan and Taurus Rates */ + u32 enhanced_rate_bitmap; + + /* + * 0-76 bits used, remaining reserved + * bits 0-15 and 32 should be set. + */ + u8 supported_mcs_set[WCN36XX_HAL_MAC_MAX_SUPPORTED_MCS_SET]; + + /* + * RX Highest Supported Data Rate defines the highest data + * rate that the STA is able to receive, in unites of 1Mbps. + * This value is derived from "Supported MCS Set field" inside + * the HT capability element. + */ + u16 rx_highest_data_rate; + +} __packed; + +struct wcn36xx_hal_config_sta_params { + /* BSSID of STA */ + u8 bssid[ETH_ALEN]; + + /* ASSOC ID, as assigned by UMAC */ + u16 aid; + + /* STA entry Type: 0 - Self, 1 - Other/Peer, 2 - BSSID, 3 - BCAST */ + u8 type; + + /* Short Preamble Supported. */ + u8 short_preamble_supported; + + /* MAC Address of STA */ + u8 mac[ETH_ALEN]; + + /* Listen interval of the STA */ + u16 listen_interval; + + /* Support for 11e/WMM */ + u8 wmm_enabled; + + /* 11n HT capable STA */ + u8 ht_capable; + + /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */ + u8 tx_channel_width_set; + + /* RIFS mode 0 - NA, 1 - Allowed */ + u8 rifs_mode; + + /* L-SIG TXOP Protection mechanism + 0 - No Support, 1 - Supported + SG - there is global field */ + u8 lsig_txop_protection; + + /* Max Ampdu Size supported by STA. TPE programming. + 0 : 8k , 1 : 16k, 2 : 32k, 3 : 64k */ + u8 max_ampdu_size; + + /* Max Ampdu density. Used by RA. 3 : 0~7 : 2^(11nAMPDUdensity -4) */ + u8 max_ampdu_density; + + /* Max AMSDU size 1 : 3839 bytes, 0 : 7935 bytes */ + u8 max_amsdu_size; + + /* Short GI support for 40Mhz packets */ + u8 sgi_40mhz; + + /* Short GI support for 20Mhz packets */ + u8 sgi_20Mhz; + + /* TODO move this parameter to the end for 3680 */ + /* These rates are the intersection of peer and self capabilities. */ + struct wcn36xx_hal_supported_rates supported_rates; + + /* Robust Management Frame (RMF) enabled/disabled */ + u8 rmf; + + /* The unicast encryption type in the association */ + u32 encrypt_type; + + /* HAL should update the existing STA entry, if this flag is set. UMAC + will set this flag in case of RE-ASSOC, where we want to reuse the + old STA ID. 0 = Add, 1 = Update */ + u8 action; + + /* U-APSD Flags: 1b per AC. Encoded as follows: + b7 b6 b5 b4 b3 b2 b1 b0 = + X X X X BE BK VI VO */ + u8 uapsd; + + /* Max SP Length */ + u8 max_sp_len; + + /* 11n Green Field preamble support + 0 - Not supported, 1 - Supported */ + u8 green_field_capable; + + /* MIMO Power Save mode */ + enum wcn36xx_hal_ht_mimo_state mimo_ps; + + /* Delayed BA Support */ + u8 delayed_ba_support; + + /* Max AMPDU duration in 32us */ + u8 max_ampdu_duration; + + /* HT STA should set it to 1 if it is enabled in BSS. HT STA should + * set it to 0 if AP does not support it. This indication is sent + * to HAL and HAL uses this flag to pickup up appropriate 40Mhz + * rates. */ + u8 dsss_cck_mode_40mhz; + + /* Valid STA Idx when action=Update. Set to 0xFF when invalid! + * Retained for backward compalibity with existing HAL code */ + u8 sta_index; + + /* BSSID of BSS to which station is associated. Set to 0xFF when + * invalid. Retained for backward compalibity with existing HAL + * code */ + u8 bssid_index; + + u8 p2p; + + /* TODO add this parameter for 3680. */ + /* Reserved to align next field on a dword boundary */ + /* u8 reserved; */ +} __packed; + +struct wcn36xx_hal_config_sta_req_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_config_sta_params sta_params; +} __packed; + +struct wcn36xx_hal_config_sta_params_v1 { + /* BSSID of STA */ + u8 bssid[ETH_ALEN]; + + /* ASSOC ID, as assigned by UMAC */ + u16 aid; + + /* STA entry Type: 0 - Self, 1 - Other/Peer, 2 - BSSID, 3 - BCAST */ + u8 type; + + /* Short Preamble Supported. */ + u8 short_preamble_supported; + + /* MAC Address of STA */ + u8 mac[ETH_ALEN]; + + /* Listen interval of the STA */ + u16 listen_interval; + + /* Support for 11e/WMM */ + u8 wmm_enabled; + + /* 11n HT capable STA */ + u8 ht_capable; + + /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */ + u8 tx_channel_width_set; + + /* RIFS mode 0 - NA, 1 - Allowed */ + u8 rifs_mode; + + /* L-SIG TXOP Protection mechanism + 0 - No Support, 1 - Supported + SG - there is global field */ + u8 lsig_txop_protection; + + /* Max Ampdu Size supported by STA. TPE programming. + 0 : 8k , 1 : 16k, 2 : 32k, 3 : 64k */ + u8 max_ampdu_size; + + /* Max Ampdu density. Used by RA. 3 : 0~7 : 2^(11nAMPDUdensity -4) */ + u8 max_ampdu_density; + + /* Max AMSDU size 1 : 3839 bytes, 0 : 7935 bytes */ + u8 max_amsdu_size; + + /* Short GI support for 40Mhz packets */ + u8 sgi_40mhz; + + /* Short GI support for 20Mhz packets */ + u8 sgi_20Mhz; + + /* Robust Management Frame (RMF) enabled/disabled */ + u8 rmf; + + /* The unicast encryption type in the association */ + u32 encrypt_type; + + /* HAL should update the existing STA entry, if this flag is set. UMAC + will set this flag in case of RE-ASSOC, where we want to reuse the + old STA ID. 0 = Add, 1 = Update */ + u8 action; + + /* U-APSD Flags: 1b per AC. Encoded as follows: + b7 b6 b5 b4 b3 b2 b1 b0 = + X X X X BE BK VI VO */ + u8 uapsd; + + /* Max SP Length */ + u8 max_sp_len; + + /* 11n Green Field preamble support + 0 - Not supported, 1 - Supported */ + u8 green_field_capable; + + /* MIMO Power Save mode */ + enum wcn36xx_hal_ht_mimo_state mimo_ps; + + /* Delayed BA Support */ + u8 delayed_ba_support; + + /* Max AMPDU duration in 32us */ + u8 max_ampdu_duration; + + /* HT STA should set it to 1 if it is enabled in BSS. HT STA should + * set it to 0 if AP does not support it. This indication is sent + * to HAL and HAL uses this flag to pickup up appropriate 40Mhz + * rates. */ + u8 dsss_cck_mode_40mhz; + + /* Valid STA Idx when action=Update. Set to 0xFF when invalid! + * Retained for backward compalibity with existing HAL code */ + u8 sta_index; + + /* BSSID of BSS to which station is associated. Set to 0xFF when + * invalid. Retained for backward compalibity with existing HAL + * code */ + u8 bssid_index; + + u8 p2p; + + /* Reserved to align next field on a dword boundary */ + u8 reserved; + + /* These rates are the intersection of peer and self capabilities. */ + struct wcn36xx_hal_supported_rates supported_rates; +} __packed; + +struct wcn36xx_hal_config_sta_req_msg_v1 { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_config_sta_params_v1 sta_params; +} __packed; + +struct config_sta_rsp_params { + /* success or failure */ + u32 status; + + /* Station index; valid only when 'status' field value SUCCESS */ + u8 sta_index; + + /* BSSID Index of BSS to which the station is associated */ + u8 bssid_index; + + /* DPU Index for PTK */ + u8 dpu_index; + + /* DPU Index for GTK */ + u8 bcast_dpu_index; + + /* DPU Index for IGTK */ + u8 bcast_mgmt_dpu_idx; + + /* PTK DPU signature */ + u8 uc_ucast_sig; + + /* GTK DPU isignature */ + u8 uc_bcast_sig; + + /* IGTK DPU signature */ + u8 uc_mgmt_sig; + + u8 p2p; + +} __packed; + +struct wcn36xx_hal_config_sta_rsp_msg { + struct wcn36xx_hal_msg_header header; + + struct config_sta_rsp_params params; +} __packed; + +/* Delete STA Request message */ +struct wcn36xx_hal_delete_sta_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Index of STA to delete */ + u8 sta_index; + +} __packed; + +/* Delete STA Response message */ +struct wcn36xx_hal_delete_sta_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + /* Index of STA deleted */ + u8 sta_id; +} __packed; + +/* 12 Bytes long because this structure can be used to represent rate and + * extended rate set IEs. The parser assume this to be at least 12 */ +struct wcn36xx_hal_rate_set { + u8 num_rates; + u8 rate[WCN36XX_HAL_MAC_RATESET_EID_MAX]; +} __packed; + +/* access category record */ +struct wcn36xx_hal_aci_aifsn { +#ifndef ANI_LITTLE_BIT_ENDIAN + u8 rsvd:1; + u8 aci:2; + u8 acm:1; + u8 aifsn:4; +#else + u8 aifsn:4; + u8 acm:1; + u8 aci:2; + u8 rsvd:1; +#endif +} __packed; + +/* contention window size */ +struct wcn36xx_hal_mac_cw { +#ifndef ANI_LITTLE_BIT_ENDIAN + u8 max:4; + u8 min:4; +#else + u8 min:4; + u8 max:4; +#endif +} __packed; + +struct wcn36xx_hal_edca_param_record { + struct wcn36xx_hal_aci_aifsn aci; + struct wcn36xx_hal_mac_cw cw; + u16 txop_limit; +} __packed; + +struct wcn36xx_hal_mac_ssid { + u8 length; + u8 ssid[32]; +} __packed; + +/* Concurrency role. These are generic IDs that identify the various roles + * in the software system. */ +enum wcn36xx_hal_con_mode { + WCN36XX_HAL_STA_MODE = 0, + + /* to support softAp mode . This is misleading. + It means AP MODE only. */ + WCN36XX_HAL_STA_SAP_MODE = 1, + + WCN36XX_HAL_P2P_CLIENT_MODE, + WCN36XX_HAL_P2P_GO_MODE, + WCN36XX_HAL_MONITOR_MODE, +}; + +/* This is a bit pattern to be set for each mode + * bit 0 - sta mode + * bit 1 - ap mode + * bit 2 - p2p client mode + * bit 3 - p2p go mode */ +enum wcn36xx_hal_concurrency_mode { + HAL_STA = 1, + HAL_SAP = 2, + + /* to support sta, softAp mode . This means STA+AP mode */ + HAL_STA_SAP = 3, + + HAL_P2P_CLIENT = 4, + HAL_P2P_GO = 8, + HAL_MAX_CONCURRENCY_PERSONA = 4 +}; + +struct wcn36xx_hal_config_bss_params { + /* BSSID */ + u8 bssid[ETH_ALEN]; + + /* Self Mac Address */ + u8 self_mac_addr[ETH_ALEN]; + + /* BSS type */ + enum wcn36xx_hal_bss_type bss_type; + + /* Operational Mode: AP =0, STA = 1 */ + u8 oper_mode; + + /* Network Type */ + enum wcn36xx_hal_nw_type nw_type; + + /* Used to classify PURE_11G/11G_MIXED to program MTU */ + u8 short_slot_time_supported; + + /* Co-exist with 11a STA */ + u8 lla_coexist; + + /* Co-exist with 11b STA */ + u8 llb_coexist; + + /* Co-exist with 11g STA */ + u8 llg_coexist; + + /* Coexistence with 11n STA */ + u8 ht20_coexist; + + /* Non GF coexist flag */ + u8 lln_non_gf_coexist; + + /* TXOP protection support */ + u8 lsig_tx_op_protection_full_support; + + /* RIFS mode */ + u8 rifs_mode; + + /* Beacon Interval in TU */ + u16 beacon_interval; + + /* DTIM period */ + u8 dtim_period; + + /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */ + u8 tx_channel_width_set; + + /* Operating channel */ + u8 oper_channel; + + /* Extension channel for channel bonding */ + u8 ext_channel; + + /* Reserved to align next field on a dword boundary */ + u8 reserved; + + /* TODO move sta to the end for 3680 */ + /* Context of the station being added in HW + * Add a STA entry for "itself" - + * + * On AP - Add the AP itself in an "STA context" + * + * On STA - Add the AP to which this STA is joining in an + * "STA context" + */ + struct wcn36xx_hal_config_sta_params sta; + /* SSID of the BSS */ + struct wcn36xx_hal_mac_ssid ssid; + + /* HAL should update the existing BSS entry, if this flag is set. + * UMAC will set this flag in case of reassoc, where we want to + * resue the the old BSSID and still return success 0 = Add, 1 = + * Update */ + u8 action; + + /* MAC Rate Set */ + struct wcn36xx_hal_rate_set rateset; + + /* Enable/Disable HT capabilities of the BSS */ + u8 ht; + + /* Enable/Disable OBSS protection */ + u8 obss_prot_enabled; + + /* RMF enabled/disabled */ + u8 rmf; + + /* HT Operating Mode operating mode of the 802.11n STA */ + enum wcn36xx_hal_ht_operating_mode ht_oper_mode; + + /* Dual CTS Protection: 0 - Unused, 1 - Used */ + u8 dual_cts_protection; + + /* Probe Response Max retries */ + u8 max_probe_resp_retry_limit; + + /* To Enable Hidden ssid */ + u8 hidden_ssid; + + /* To Enable Disable FW Proxy Probe Resp */ + u8 proxy_probe_resp; + + /* Boolean to indicate if EDCA params are valid. UMAC might not + * have valid EDCA params or might not desire to apply EDCA params + * during config BSS. 0 implies Not Valid ; Non-Zero implies + * valid */ + u8 edca_params_valid; + + /* EDCA Parameters for Best Effort Access Category */ + struct wcn36xx_hal_edca_param_record acbe; + + /* EDCA Parameters forBackground Access Category */ + struct wcn36xx_hal_edca_param_record acbk; + + /* EDCA Parameters for Video Access Category */ + struct wcn36xx_hal_edca_param_record acvi; + + /* EDCA Parameters for Voice Access Category */ + struct wcn36xx_hal_edca_param_record acvo; + + /* Ext Bss Config Msg if set */ + u8 ext_set_sta_key_param_valid; + + /* SetStaKeyParams for ext bss msg */ + struct wcn36xx_hal_set_sta_key_params ext_set_sta_key_param; + + /* Persona for the BSS can be STA,AP,GO,CLIENT value same as enum + * wcn36xx_hal_con_mode */ + u8 wcn36xx_hal_persona; + + u8 spectrum_mgt_enable; + + /* HAL fills in the tx power used for mgmt frames in txMgmtPower */ + s8 tx_mgmt_power; + + /* maxTxPower has max power to be used after applying the power + * constraint if any */ + s8 max_tx_power; +} __packed; + +struct wcn36xx_hal_config_bss_req_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_config_bss_params bss_params; +} __packed; + +struct wcn36xx_hal_config_bss_params_v1 { + /* BSSID */ + u8 bssid[ETH_ALEN]; + + /* Self Mac Address */ + u8 self_mac_addr[ETH_ALEN]; + + /* BSS type */ + enum wcn36xx_hal_bss_type bss_type; + + /* Operational Mode: AP =0, STA = 1 */ + u8 oper_mode; + + /* Network Type */ + enum wcn36xx_hal_nw_type nw_type; + + /* Used to classify PURE_11G/11G_MIXED to program MTU */ + u8 short_slot_time_supported; + + /* Co-exist with 11a STA */ + u8 lla_coexist; + + /* Co-exist with 11b STA */ + u8 llb_coexist; + + /* Co-exist with 11g STA */ + u8 llg_coexist; + + /* Coexistence with 11n STA */ + u8 ht20_coexist; + + /* Non GF coexist flag */ + u8 lln_non_gf_coexist; + + /* TXOP protection support */ + u8 lsig_tx_op_protection_full_support; + + /* RIFS mode */ + u8 rifs_mode; + + /* Beacon Interval in TU */ + u16 beacon_interval; + + /* DTIM period */ + u8 dtim_period; + + /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */ + u8 tx_channel_width_set; + + /* Operating channel */ + u8 oper_channel; + + /* Extension channel for channel bonding */ + u8 ext_channel; + + /* Reserved to align next field on a dword boundary */ + u8 reserved; + + /* SSID of the BSS */ + struct wcn36xx_hal_mac_ssid ssid; + + /* HAL should update the existing BSS entry, if this flag is set. + * UMAC will set this flag in case of reassoc, where we want to + * resue the the old BSSID and still return success 0 = Add, 1 = + * Update */ + u8 action; + + /* MAC Rate Set */ + struct wcn36xx_hal_rate_set rateset; + + /* Enable/Disable HT capabilities of the BSS */ + u8 ht; + + /* Enable/Disable OBSS protection */ + u8 obss_prot_enabled; + + /* RMF enabled/disabled */ + u8 rmf; + + /* HT Operating Mode operating mode of the 802.11n STA */ + enum wcn36xx_hal_ht_operating_mode ht_oper_mode; + + /* Dual CTS Protection: 0 - Unused, 1 - Used */ + u8 dual_cts_protection; + + /* Probe Response Max retries */ + u8 max_probe_resp_retry_limit; + + /* To Enable Hidden ssid */ + u8 hidden_ssid; + + /* To Enable Disable FW Proxy Probe Resp */ + u8 proxy_probe_resp; + + /* Boolean to indicate if EDCA params are valid. UMAC might not + * have valid EDCA params or might not desire to apply EDCA params + * during config BSS. 0 implies Not Valid ; Non-Zero implies + * valid */ + u8 edca_params_valid; + + /* EDCA Parameters for Best Effort Access Category */ + struct wcn36xx_hal_edca_param_record acbe; + + /* EDCA Parameters forBackground Access Category */ + struct wcn36xx_hal_edca_param_record acbk; + + /* EDCA Parameters for Video Access Category */ + struct wcn36xx_hal_edca_param_record acvi; + + /* EDCA Parameters for Voice Access Category */ + struct wcn36xx_hal_edca_param_record acvo; + + /* Ext Bss Config Msg if set */ + u8 ext_set_sta_key_param_valid; + + /* SetStaKeyParams for ext bss msg */ + struct wcn36xx_hal_set_sta_key_params ext_set_sta_key_param; + + /* Persona for the BSS can be STA,AP,GO,CLIENT value same as enum + * wcn36xx_hal_con_mode */ + u8 wcn36xx_hal_persona; + + u8 spectrum_mgt_enable; + + /* HAL fills in the tx power used for mgmt frames in txMgmtPower */ + s8 tx_mgmt_power; + + /* maxTxPower has max power to be used after applying the power + * constraint if any */ + s8 max_tx_power; + + /* Context of the station being added in HW + * Add a STA entry for "itself" - + * + * On AP - Add the AP itself in an "STA context" + * + * On STA - Add the AP to which this STA is joining in an + * "STA context" + */ + struct wcn36xx_hal_config_sta_params_v1 sta; +} __packed; + +struct wcn36xx_hal_config_bss_req_msg_v1 { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_config_bss_params_v1 bss_params; +} __packed; + +struct wcn36xx_hal_config_bss_rsp_params { + /* Success or Failure */ + u32 status; + + /* BSS index allocated by HAL */ + u8 bss_index; + + /* DPU descriptor index for PTK */ + u8 dpu_desc_index; + + /* PTK DPU signature */ + u8 ucast_dpu_signature; + + /* DPU descriptor index for GTK */ + u8 bcast_dpu_desc_indx; + + /* GTK DPU signature */ + u8 bcast_dpu_signature; + + /* DPU descriptor for IGTK */ + u8 mgmt_dpu_desc_index; + + /* IGTK DPU signature */ + u8 mgmt_dpu_signature; + + /* Station Index for BSS entry */ + u8 bss_sta_index; + + /* Self station index for this BSS */ + u8 bss_self_sta_index; + + /* Bcast station for buffering bcast frames in AP role */ + u8 bss_bcast_sta_idx; + + /* MAC Address of STA(PEER/SELF) in staContext of configBSSReq */ + u8 mac[ETH_ALEN]; + + /* HAL fills in the tx power used for mgmt frames in this field. */ + s8 tx_mgmt_power; + +} __packed; + +struct wcn36xx_hal_config_bss_rsp_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_config_bss_rsp_params bss_rsp_params; +} __packed; + +struct wcn36xx_hal_delete_bss_req_msg { + struct wcn36xx_hal_msg_header header; + + /* BSS index to be deleted */ + u8 bss_index; + +} __packed; + +struct wcn36xx_hal_delete_bss_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* Success or Failure */ + u32 status; + + /* BSS index that has been deleted */ + u8 bss_index; + +} __packed; + +struct wcn36xx_hal_join_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Indicates the BSSID to which STA is going to associate */ + u8 bssid[ETH_ALEN]; + + /* Indicates the channel to switch to. */ + u8 channel; + + /* Self STA MAC */ + u8 self_sta_mac_addr[ETH_ALEN]; + + /* Local power constraint */ + u8 local_power_constraint; + + /* Secondary channel offset */ + enum phy_chan_bond_state secondary_channel_offset; + + /* link State */ + enum wcn36xx_hal_link_state link_state; + + /* Max TX power */ + s8 max_tx_power; +} __packed; + +struct wcn36xx_hal_join_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + /* HAL fills in the tx power used for mgmt frames in this field */ + u8 tx_mgmt_power; +} __packed; + +struct post_assoc_req_msg { + struct wcn36xx_hal_msg_header header; + + struct wcn36xx_hal_config_sta_params sta_params; + struct wcn36xx_hal_config_bss_params bss_params; +}; + +struct post_assoc_rsp_msg { + struct wcn36xx_hal_msg_header header; + struct config_sta_rsp_params sta_rsp_params; + struct wcn36xx_hal_config_bss_rsp_params bss_rsp_params; +}; + +/* This is used to create a set of WEP keys for a given BSS. */ +struct wcn36xx_hal_set_bss_key_req_msg { + struct wcn36xx_hal_msg_header header; + + /* BSS Index of the BSS */ + u8 bss_idx; + + /* Encryption Type used with peer */ + enum ani_ed_type enc_type; + + /* Number of keys */ + u8 num_keys; + + /* Array of keys. */ + struct wcn36xx_hal_keys keys[WCN36XX_HAL_MAC_MAX_NUM_OF_DEFAULT_KEYS]; + + /* Control for Replay Count, 1= Single TID based replay count on Tx + * 0 = Per TID based replay count on TX */ + u8 single_tid_rc; +} __packed; + +/* tagged version of set bss key */ +struct wcn36xx_hal_set_bss_key_req_msg_tagged { + struct wcn36xx_hal_set_bss_key_req_msg Msg; + u32 tag; +} __packed; + +struct wcn36xx_hal_set_bss_key_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +} __packed; + +/* + * This is used configure the key information on a given station. + * When the sec_type is WEP40 or WEP104, the def_wep_idx is used to locate + * a preconfigured key from a BSS the station assoicated with; otherwise + * a new key descriptor is created based on the key field. + */ +struct wcn36xx_hal_set_sta_key_req_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_set_sta_key_params set_sta_key_params; +} __packed; + +struct wcn36xx_hal_set_sta_key_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +} __packed; + +struct wcn36xx_hal_remove_bss_key_req_msg { + struct wcn36xx_hal_msg_header header; + + /* BSS Index of the BSS */ + u8 bss_idx; + + /* Encryption Type used with peer */ + enum ani_ed_type enc_type; + + /* Key Id */ + u8 key_id; + + /* STATIC/DYNAMIC. Used in Nullifying in Key Descriptors for + * Static/Dynamic keys */ + enum ani_wep_type wep_type; +} __packed; + +struct wcn36xx_hal_remove_bss_key_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +} __packed; + +/* + * This is used by PE to Remove the key information on a given station. + */ +struct wcn36xx_hal_remove_sta_key_req_msg { + struct wcn36xx_hal_msg_header header; + + /* STA Index */ + u16 sta_idx; + + /* Encryption Type used with peer */ + enum ani_ed_type enc_type; + + /* Key Id */ + u8 key_id; + + /* Whether to invalidate the Broadcast key or Unicast key. In case + * of WEP, the same key is used for both broadcast and unicast. */ + u8 unicast; + +} __packed; + +struct wcn36xx_hal_remove_sta_key_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /*success or failure */ + u32 status; + +} __packed; + +#ifdef FEATURE_OEM_DATA_SUPPORT + +#ifndef OEM_DATA_REQ_SIZE +#define OEM_DATA_REQ_SIZE 134 +#endif + +#ifndef OEM_DATA_RSP_SIZE +#define OEM_DATA_RSP_SIZE 1968 +#endif + +struct start_oem_data_req_msg { + struct wcn36xx_hal_msg_header header; + + u32 status; + tSirMacAddr self_mac_addr; + u8 oem_data_req[OEM_DATA_REQ_SIZE]; + +}; + +struct start_oem_data_rsp_msg { + struct wcn36xx_hal_msg_header header; + + u8 oem_data_rsp[OEM_DATA_RSP_SIZE]; +}; + +#endif + +struct wcn36xx_hal_switch_channel_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Channel number */ + u8 channel_number; + + /* Local power constraint */ + u8 local_power_constraint; + + /* Secondary channel offset */ + enum phy_chan_bond_state secondary_channel_offset; + + /* HAL fills in the tx power used for mgmt frames in this field. */ + u8 tx_mgmt_power; + + /* Max TX power */ + u8 max_tx_power; + + /* Self STA MAC */ + u8 self_sta_mac_addr[ETH_ALEN]; + + /* VO WIFI comment: BSSID needed to identify session. As the + * request has power constraints, this should be applied only to + * that session Since MTU timing and EDCA are sessionized, this + * struct needs to be sessionized and bssid needs to be out of the + * VOWifi feature flag V IMP: Keep bssId field at the end of this + * msg. It is used to mantain backward compatbility by way of + * ignoring if using new host/old FW or old host/new FW since it is + * at the end of this struct + */ + u8 bssid[ETH_ALEN]; +} __packed; + +struct wcn36xx_hal_switch_channel_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* Status */ + u32 status; + + /* Channel number - same as in request */ + u8 channel_number; + + /* HAL fills in the tx power used for mgmt frames in this field */ + u8 tx_mgmt_power; + + /* BSSID needed to identify session - same as in request */ + u8 bssid[ETH_ALEN]; + +} __packed; + +struct update_edca_params_req_msg { + struct wcn36xx_hal_msg_header header; + + /*BSS Index */ + u16 bss_index; + + /* Best Effort */ + struct wcn36xx_hal_edca_param_record acbe; + + /* Background */ + struct wcn36xx_hal_edca_param_record acbk; + + /* Video */ + struct wcn36xx_hal_edca_param_record acvi; + + /* Voice */ + struct wcn36xx_hal_edca_param_record acvo; +}; + +struct update_edca_params_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct dpu_stats_params { + /* Index of STA to which the statistics */ + u16 sta_index; + + /* Encryption mode */ + u8 enc_mode; + + /* status */ + u32 status; + + /* Statistics */ + u32 send_blocks; + u32 recv_blocks; + u32 replays; + u8 mic_error_cnt; + u32 prot_excl_cnt; + u16 format_err_cnt; + u16 un_decryptable_cnt; + u32 decrypt_err_cnt; + u32 decrypt_ok_cnt; +}; + +struct wcn36xx_hal_stats_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Valid STA Idx for per STA stats request */ + u32 sta_id; + + /* Categories of stats requested as specified in eHalStatsMask */ + u32 stats_mask; +}; + +struct ani_summary_stats_info { + /* Total number of packets(per AC) that were successfully + * transmitted with retries */ + u32 retry_cnt[4]; + + /* The number of MSDU packets and MMPDU frames per AC that the + * 802.11 station successfully transmitted after more than one + * retransmission attempt */ + u32 multiple_retry_cnt[4]; + + /* Total number of packets(per AC) that were successfully + * transmitted (with and without retries, including multi-cast, + * broadcast) */ + u32 tx_frm_cnt[4]; + + /* Total number of packets that were successfully received (after + * appropriate filter rules including multi-cast, broadcast) */ + u32 rx_frm_cnt; + + /* Total number of duplicate frames received successfully */ + u32 frm_dup_cnt; + + /* Total number packets(per AC) failed to transmit */ + u32 fail_cnt[4]; + + /* Total number of RTS/CTS sequence failures for transmission of a + * packet */ + u32 rts_fail_cnt; + + /* Total number packets failed transmit because of no ACK from the + * remote entity */ + u32 ack_fail_cnt; + + /* Total number of RTS/CTS sequence success for transmission of a + * packet */ + u32 rts_succ_cnt; + + /* The sum of the receive error count and dropped-receive-buffer + * error count. HAL will provide this as a sum of (FCS error) + + * (Fail get BD/PDU in HW) */ + u32 rx_discard_cnt; + + /* + * The receive error count. HAL will provide the RxP FCS error + * global counter. */ + u32 rx_error_cnt; + + /* The sum of the transmit-directed byte count, transmit-multicast + * byte count and transmit-broadcast byte count. HAL will sum TPE + * UC/MC/BCAST global counters to provide this. */ + u32 tx_byte_cnt; +}; + +/* defines tx_rate_flags */ +enum tx_rate_info { + /* Legacy rates */ + HAL_TX_RATE_LEGACY = 0x1, + + /* HT20 rates */ + HAL_TX_RATE_HT20 = 0x2, + + /* HT40 rates */ + HAL_TX_RATE_HT40 = 0x4, + + /* Rate with Short guard interval */ + HAL_TX_RATE_SGI = 0x8, + + /* Rate with Long guard interval */ + HAL_TX_RATE_LGI = 0x10 +}; + +struct ani_global_class_a_stats_info { + /* The number of MPDU frames received by the 802.11 station for + * MSDU packets or MMPDU frames */ + u32 rx_frag_cnt; + + /* The number of MPDU frames received by the 802.11 station for + * MSDU packets or MMPDU frames when a promiscuous packet filter + * was enabled */ + u32 promiscuous_rx_frag_cnt; + + /* The receiver input sensitivity referenced to a FER of 8% at an + * MPDU length of 1024 bytes at the antenna connector. Each element + * of the array shall correspond to a supported rate and the order + * shall be the same as the supporteRates parameter. */ + u32 rx_input_sensitivity; + + /* The maximum transmit power in dBm upto one decimal. for eg: if + * it is 10.5dBm, the value would be 105 */ + u32 max_pwr; + + /* Number of times the receiver failed to synchronize with the + * incoming signal after detecting the sync in the preamble of the + * transmitted PLCP protocol data unit. */ + u32 sync_fail_cnt; + + /* Legacy transmit rate, in units of 500 kbit/sec, for the most + * recently transmitted frame */ + u32 tx_rate; + + /* mcs index for HT20 and HT40 rates */ + u32 mcs_index; + + /* to differentiate between HT20 and HT40 rates; short and long + * guard interval */ + u32 tx_rate_flags; +}; + +struct ani_global_security_stats { + /* The number of unencrypted received MPDU frames that the MAC + * layer discarded when the IEEE 802.11 dot11ExcludeUnencrypted + * management information base (MIB) object is enabled */ + u32 rx_wep_unencrypted_frm_cnt; + + /* The number of received MSDU packets that that the 802.11 station + * discarded because of MIC failures */ + u32 rx_mic_fail_cnt; + + /* The number of encrypted MPDU frames that the 802.11 station + * failed to decrypt because of a TKIP ICV error */ + u32 tkip_icv_err; + + /* The number of received MPDU frames that the 802.11 discarded + * because of an invalid AES-CCMP format */ + u32 aes_ccmp_format_err; + + /* The number of received MPDU frames that the 802.11 station + * discarded because of the AES-CCMP replay protection procedure */ + u32 aes_ccmp_replay_cnt; + + /* The number of received MPDU frames that the 802.11 station + * discarded because of errors detected by the AES-CCMP decryption + * algorithm */ + u32 aes_ccmp_decrpt_err; + + /* The number of encrypted MPDU frames received for which a WEP + * decryption key was not available on the 802.11 station */ + u32 wep_undecryptable_cnt; + + /* The number of encrypted MPDU frames that the 802.11 station + * failed to decrypt because of a WEP ICV error */ + u32 wep_icv_err; + + /* The number of received encrypted packets that the 802.11 station + * successfully decrypted */ + u32 rx_decrypt_succ_cnt; + + /* The number of encrypted packets that the 802.11 station failed + * to decrypt */ + u32 rx_decrypt_fail_cnt; +}; + +struct ani_global_class_b_stats_info { + struct ani_global_security_stats uc_stats; + struct ani_global_security_stats mc_bc_stats; +}; + +struct ani_global_class_c_stats_info { + /* This counter shall be incremented for a received A-MSDU frame + * with the stations MAC address in the address 1 field or an + * A-MSDU frame with a group address in the address 1 field */ + u32 rx_amsdu_cnt; + + /* This counter shall be incremented when the MAC receives an AMPDU + * from the PHY */ + u32 rx_ampdu_cnt; + + /* This counter shall be incremented when a Frame is transmitted + * only on the primary channel */ + u32 tx_20_frm_cnt; + + /* This counter shall be incremented when a Frame is received only + * on the primary channel */ + u32 rx_20_frm_cnt; + + /* This counter shall be incremented by the number of MPDUs + * received in the A-MPDU when an A-MPDU is received */ + u32 rx_mpdu_in_ampdu_cnt; + + /* This counter shall be incremented when an MPDU delimiter has a + * CRC error when this is the first CRC error in the received AMPDU + * or when the previous delimiter has been decoded correctly */ + u32 ampdu_delimiter_crc_err; +}; + +struct ani_per_sta_stats_info { + /* The number of MPDU frames that the 802.11 station transmitted + * and acknowledged through a received 802.11 ACK frame */ + u32 tx_frag_cnt[4]; + + /* This counter shall be incremented when an A-MPDU is transmitted */ + u32 tx_ampdu_cnt; + + /* This counter shall increment by the number of MPDUs in the AMPDU + * when an A-MPDU is transmitted */ + u32 tx_mpdu_in_ampdu_cnt; +}; + +struct wcn36xx_hal_stats_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* Success or Failure */ + u32 status; + + /* STA Idx */ + u32 sta_index; + + /* Categories of STATS being returned as per eHalStatsMask */ + u32 stats_mask; + + /* message type is same as the request type */ + u16 msg_type; + + /* length of the entire request, includes the pStatsBuf length too */ + u16 msg_len; +}; + +struct wcn36xx_hal_set_link_state_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 bssid[ETH_ALEN]; + enum wcn36xx_hal_link_state state; + u8 self_mac_addr[ETH_ALEN]; + +} __packed; + +struct set_link_state_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +/* TSPEC Params */ +struct wcn36xx_hal_ts_info_tfc { +#ifndef ANI_LITTLE_BIT_ENDIAN + u16 ackPolicy:2; + u16 userPrio:3; + u16 psb:1; + u16 aggregation:1; + u16 accessPolicy:2; + u16 direction:2; + u16 tsid:4; + u16 trafficType:1; +#else + u16 trafficType:1; + u16 tsid:4; + u16 direction:2; + u16 accessPolicy:2; + u16 aggregation:1; + u16 psb:1; + u16 userPrio:3; + u16 ackPolicy:2; +#endif +}; + +/* Flag to schedule the traffic type */ +struct wcn36xx_hal_ts_info_sch { +#ifndef ANI_LITTLE_BIT_ENDIAN + u8 rsvd:7; + u8 schedule:1; +#else + u8 schedule:1; + u8 rsvd:7; +#endif +}; + +/* Traffic and scheduling info */ +struct wcn36xx_hal_ts_info { + struct wcn36xx_hal_ts_info_tfc traffic; + struct wcn36xx_hal_ts_info_sch schedule; +}; + +/* Information elements */ +struct wcn36xx_hal_tspec_ie { + u8 type; + u8 length; + struct wcn36xx_hal_ts_info ts_info; + u16 nom_msdu_size; + u16 max_msdu_size; + u32 min_svc_interval; + u32 max_svc_interval; + u32 inact_interval; + u32 suspend_interval; + u32 svc_start_time; + u32 min_data_rate; + u32 mean_data_rate; + u32 peak_data_rate; + u32 max_burst_sz; + u32 delay_bound; + u32 min_phy_rate; + u16 surplus_bw; + u16 medium_time; +}; + +struct add_ts_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Station Index */ + u16 sta_index; + + /* TSPEC handler uniquely identifying a TSPEC for a STA in a BSS */ + u16 tspec_index; + + /* To program TPE with required parameters */ + struct wcn36xx_hal_tspec_ie tspec; + + /* U-APSD Flags: 1b per AC. Encoded as follows: + b7 b6 b5 b4 b3 b2 b1 b0 = + X X X X BE BK VI VO */ + u8 uapsd; + + /* These parameters are for all the access categories */ + + /* Service Interval */ + u32 service_interval[WCN36XX_HAL_MAX_AC]; + + /* Suspend Interval */ + u32 suspend_interval[WCN36XX_HAL_MAX_AC]; + + /* Delay Interval */ + u32 delay_interval[WCN36XX_HAL_MAX_AC]; +}; + +struct add_rs_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct del_ts_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Station Index */ + u16 sta_index; + + /* TSPEC identifier uniquely identifying a TSPEC for a STA in a BSS */ + u16 tspec_index; + + /* To lookup station id using the mac address */ + u8 bssid[ETH_ALEN]; +}; + +struct del_ts_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +/* End of TSpec Parameters */ + +/* Start of BLOCK ACK related Parameters */ + +struct wcn36xx_hal_add_ba_session_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Station Index */ + u16 sta_index; + + /* Peer MAC Address */ + u8 mac_addr[ETH_ALEN]; + + /* ADDBA Action Frame dialog token + HAL will not interpret this object */ + u8 dialog_token; + + /* TID for which the BA is being setup + This identifies the TC or TS of interest */ + u8 tid; + + /* 0 - Delayed BA (Not supported) + 1 - Immediate BA */ + u8 policy; + + /* Indicates the number of buffers for this TID (baTID) + NOTE - This is the requested buffer size. When this + is processed by HAL and subsequently by HDD, it is + possible that HDD may change this buffer size. Any + change in the buffer size should be noted by PE and + advertized appropriately in the ADDBA response */ + u16 buffer_size; + + /* BA timeout in TU's 0 means no timeout will occur */ + u16 timeout; + + /* b0..b3 - Fragment Number - Always set to 0 + b4..b15 - Starting Sequence Number of first MSDU + for which this BA is setup */ + u16 ssn; + + /* ADDBA direction + 1 - Originator + 0 - Recipient */ + u8 direction; +} __packed; + +struct wcn36xx_hal_add_ba_session_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + /* Dialog token */ + u8 dialog_token; + + /* TID for which the BA session has been setup */ + u8 ba_tid; + + /* BA Buffer Size allocated for the current BA session */ + u8 ba_buffer_size; + + u8 ba_session_id; + + /* Reordering Window buffer */ + u8 win_size; + + /* Station Index to id the sta */ + u8 sta_index; + + /* Starting Sequence Number */ + u16 ssn; +} __packed; + +struct wcn36xx_hal_add_ba_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Session Id */ + u8 session_id; + + /* Reorder Window Size */ + u8 win_size; +/* Old FW 1.2.2.4 does not support this*/ +#ifdef FEATURE_ON_CHIP_REORDERING + u8 reordering_done_on_chip; +#endif +} __packed; + +struct wcn36xx_hal_add_ba_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + /* Dialog token */ + u8 dialog_token; +} __packed; + +struct add_ba_info { + u16 ba_enable:1; + u16 starting_seq_num:12; + u16 reserved:3; +}; + +struct wcn36xx_hal_trigger_ba_rsp_candidate { + u8 sta_addr[ETH_ALEN]; + struct add_ba_info ba_info[STACFG_MAX_TC]; +} __packed; + +struct wcn36xx_hal_trigget_ba_req_candidate { + u8 sta_index; + u8 tid_bitmap; +} __packed; + +struct wcn36xx_hal_trigger_ba_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Session Id */ + u8 session_id; + + /* baCandidateCnt is followed by trigger BA + * Candidate List(tTriggerBaCandidate) + */ + u16 candidate_cnt; + +} __packed; + +struct wcn36xx_hal_trigger_ba_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* TO SUPPORT BT-AMP */ + u8 bssid[ETH_ALEN]; + + /* success or failure */ + u32 status; + + /* baCandidateCnt is followed by trigger BA + * Rsp Candidate List(tTriggerRspBaCandidate) + */ + u16 candidate_cnt; +} __packed; + +struct wcn36xx_hal_del_ba_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Station Index */ + u16 sta_index; + + /* TID for which the BA session is being deleted */ + u8 tid; + + /* DELBA direction + 1 - Originator + 0 - Recipient */ + u8 direction; +} __packed; + +struct wcn36xx_hal_del_ba_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +} __packed; + +struct tsm_stats_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Traffic Id */ + u8 tid; + + u8 bssid[ETH_ALEN]; +}; + +struct tsm_stats_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /*success or failure */ + u32 status; + + /* Uplink Packet Queue delay */ + u16 uplink_pkt_queue_delay; + + /* Uplink Packet Queue delay histogram */ + u16 uplink_pkt_queue_delay_hist[4]; + + /* Uplink Packet Transmit delay */ + u32 uplink_pkt_tx_delay; + + /* Uplink Packet loss */ + u16 uplink_pkt_loss; + + /* Uplink Packet count */ + u16 uplink_pkt_count; + + /* Roaming count */ + u8 roaming_count; + + /* Roaming Delay */ + u16 roaming_delay; +}; + +struct set_key_done_msg { + struct wcn36xx_hal_msg_header header; + + /*bssid of the keys */ + u8 bssidx; + u8 enc_type; +}; + +struct wcn36xx_hal_nv_img_download_req_msg { + /* Note: The length specified in wcn36xx_hal_nv_img_download_req_msg + * messages should be + * header.len = sizeof(wcn36xx_hal_nv_img_download_req_msg) + + * nv_img_buffer_size */ + struct wcn36xx_hal_msg_header header; + + /* Fragment sequence number of the NV Image. Note that NV Image + * might not fit into one message due to size limitation of the SMD + * channel FIFO. UMAC can hence choose to chop the NV blob into + * multiple fragments starting with seqeunce number 0, 1, 2 etc. + * The last fragment MUST be indicated by marking the + * isLastFragment field to 1. Note that all the NV blobs would be + * concatenated together by HAL without any padding bytes in + * between.*/ + u16 frag_number; + + /* Is this the last fragment? When set to 1 it indicates that no + * more fragments will be sent by UMAC and HAL can concatenate all + * the NV blobs rcvd & proceed with the parsing. HAL would generate + * a WCN36XX_HAL_DOWNLOAD_NV_RSP to the WCN36XX_HAL_DOWNLOAD_NV_REQ + * after it receives each fragment */ + u16 last_fragment; + + /* NV Image size (number of bytes) */ + u32 nv_img_buffer_size; + + /* Following the 'nv_img_buffer_size', there should be + * nv_img_buffer_size bytes of NV Image i.e. + * u8[nv_img_buffer_size] */ +} __packed; + +struct wcn36xx_hal_nv_img_download_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* Success or Failure. HAL would generate a + * WCN36XX_HAL_DOWNLOAD_NV_RSP after each fragment */ + u32 status; +} __packed; + +struct wcn36xx_hal_nv_store_ind { + /* Note: The length specified in tHalNvStoreInd messages should be + * header.msgLen = sizeof(tHalNvStoreInd) + nvBlobSize */ + struct wcn36xx_hal_msg_header header; + + /* NV Item */ + u32 table_id; + + /* Size of NV Blob */ + u32 nv_blob_size; + + /* Following the 'nvBlobSize', there should be nvBlobSize bytes of + * NV blob i.e. u8[nvBlobSize] */ +}; + +/* End of Block Ack Related Parameters */ + +#define WCN36XX_HAL_CIPHER_SEQ_CTR_SIZE 6 + +/* Definition for MIC failure indication MAC reports this each time a MIC + * failure occures on Rx TKIP packet + */ +struct mic_failure_ind_msg { + struct wcn36xx_hal_msg_header header; + + u8 bssid[ETH_ALEN]; + + /* address used to compute MIC */ + u8 src_addr[ETH_ALEN]; + + /* transmitter address */ + u8 ta_addr[ETH_ALEN]; + + u8 dst_addr[ETH_ALEN]; + + u8 multicast; + + /* first byte of IV */ + u8 iv1; + + /* second byte of IV */ + u8 key_id; + + /* sequence number */ + u8 tsc[WCN36XX_HAL_CIPHER_SEQ_CTR_SIZE]; + + /* receive address */ + u8 rx_addr[ETH_ALEN]; +}; + +struct update_vht_op_mode_req_msg { + struct wcn36xx_hal_msg_header header; + + u16 op_mode; + u16 sta_id; +}; + +struct update_vht_op_mode_params_rsp_msg { + struct wcn36xx_hal_msg_header header; + + u32 status; +}; + +struct update_beacon_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 bss_index; + + /* shortPreamble mode. HAL should update all the STA rates when it + * receives this message */ + u8 short_preamble; + + /* short Slot time. */ + u8 short_slot_time; + + /* Beacon Interval */ + u16 beacon_interval; + + /* Protection related */ + u8 lla_coexist; + u8 llb_coexist; + u8 llg_coexist; + u8 ht20_coexist; + u8 lln_non_gf_coexist; + u8 lsig_tx_op_protection_full_support; + u8 rifs_mode; + + u16 param_change_bitmap; +}; + +struct update_beacon_rsp_msg { + struct wcn36xx_hal_msg_header header; + u32 status; +}; + +struct wcn36xx_hal_send_beacon_req_msg { + struct wcn36xx_hal_msg_header header; + + /* length of the template. */ + u32 beacon_length; + + /* Beacon data. */ + u8 beacon[BEACON_TEMPLATE_SIZE]; + + u8 bssid[ETH_ALEN]; + + /* TIM IE offset from the beginning of the template. */ + u32 tim_ie_offset; + + /* P2P IE offset from the begining of the template */ + u16 p2p_ie_offset; +} __packed; + +struct send_beacon_rsp_msg { + struct wcn36xx_hal_msg_header header; + u32 status; +} __packed; + +struct enable_radar_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 bssid[ETH_ALEN]; + u8 channel; +}; + +struct enable_radar_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* Link Parameters */ + u8 bssid[ETH_ALEN]; + + /* success or failure */ + u32 status; +}; + +struct radar_detect_intr_ind_msg { + struct wcn36xx_hal_msg_header header; + + u8 radar_det_channel; +}; + +struct radar_detect_ind_msg { + struct wcn36xx_hal_msg_header header; + + /* channel number in which the RADAR detected */ + u8 channel_number; + + /* RADAR pulse width in usecond */ + u16 radar_pulse_width; + + /* Number of RADAR pulses */ + u16 num_radar_pulse; +}; + +struct wcn36xx_hal_get_tpc_report_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 sta[ETH_ALEN]; + u8 dialog_token; + u8 txpower; +}; + +struct wcn36xx_hal_get_tpc_report_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_send_probe_resp_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 probe_resp_template[BEACON_TEMPLATE_SIZE]; + u32 probe_resp_template_len; + u32 proxy_probe_req_valid_ie_bmap[8]; + u8 bssid[ETH_ALEN]; +}; + +struct send_probe_resp_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct send_unknown_frame_rx_ind_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_delete_sta_context_ind_msg { + struct wcn36xx_hal_msg_header header; + + u16 aid; + u16 sta_id; + + /* TO SUPPORT BT-AMP */ + u8 bssid[ETH_ALEN]; + + /* HAL copies bssid from the sta table. */ + u8 addr2[ETH_ALEN]; + + /* To unify the keepalive / unknown A2 / tim-based disa */ + u16 reason_code; +} __packed; + +struct indicate_del_sta { + struct wcn36xx_hal_msg_header header; + u8 aid; + u8 sta_index; + u8 bss_index; + u8 reason_code; + u32 status; +}; + +struct bt_amp_event_msg { + struct wcn36xx_hal_msg_header header; + + enum bt_amp_event_type btAmpEventType; +}; + +struct bt_amp_event_rsp { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct tl_hal_flush_ac_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Station Index. originates from HAL */ + u8 sta_id; + + /* TID for which the transmit queue is being flushed */ + u8 tid; +}; + +struct tl_hal_flush_ac_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* Station Index. originates from HAL */ + u8 sta_id; + + /* TID for which the transmit queue is being flushed */ + u8 tid; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_enter_imps_req_msg { + struct wcn36xx_hal_msg_header header; +}; + +struct wcn36xx_hal_exit_imps_req { + struct wcn36xx_hal_msg_header header; +}; + +struct wcn36xx_hal_enter_bmps_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 bss_index; + + /* TBTT value derived from the last beacon */ +#ifndef BUILD_QWPTTSTATIC + u64 tbtt; +#endif + u8 dtim_count; + + /* DTIM period given to HAL during association may not be valid, if + * association is based on ProbeRsp instead of beacon. */ + u8 dtim_period; + + /* For CCX and 11R Roaming */ + u32 rssi_filter_period; + + u32 num_beacon_per_rssi_average; + u8 rssi_filter_enable; +} __packed; + +struct wcn36xx_hal_exit_bmps_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 send_data_null; + u8 bss_index; +} __packed; + +struct wcn36xx_hal_missed_beacon_ind_msg { + struct wcn36xx_hal_msg_header header; + + u8 bss_index; +} __packed; + +/* Beacon Filtering data structures */ + +/* The above structure would be followed by multiple of below mentioned + * structure + */ +struct beacon_filter_ie { + u8 element_id; + u8 check_ie_presence; + u8 offset; + u8 value; + u8 bitmask; + u8 ref; +}; + +struct wcn36xx_hal_add_bcn_filter_req_msg { + struct wcn36xx_hal_msg_header header; + + u16 capability_info; + u16 capability_mask; + u16 beacon_interval; + u16 ie_num; + u8 bss_index; + u8 reserved; +}; + +struct wcn36xx_hal_rem_bcn_filter_req { + struct wcn36xx_hal_msg_header header; + + u8 ie_Count; + u8 rem_ie_id[1]; +}; + +#define WCN36XX_HAL_IPV4_ARP_REPLY_OFFLOAD 0 +#define WCN36XX_HAL_IPV6_NEIGHBOR_DISCOVERY_OFFLOAD 1 +#define WCN36XX_HAL_IPV6_NS_OFFLOAD 2 +#define WCN36XX_HAL_IPV6_ADDR_LEN 16 +#define WCN36XX_HAL_OFFLOAD_DISABLE 0 +#define WCN36XX_HAL_OFFLOAD_ENABLE 1 +#define WCN36XX_HAL_OFFLOAD_BCAST_FILTER_ENABLE 0x2 +#define WCN36XX_HAL_OFFLOAD_ARP_AND_BCAST_FILTER_ENABLE \ + (HAL_OFFLOAD_ENABLE|HAL_OFFLOAD_BCAST_FILTER_ENABLE) + +struct wcn36xx_hal_ns_offload_params { + u8 src_ipv6_addr[WCN36XX_HAL_IPV6_ADDR_LEN]; + u8 self_ipv6_addr[WCN36XX_HAL_IPV6_ADDR_LEN]; + + /* Only support 2 possible Network Advertisement IPv6 address */ + u8 target_ipv6_addr1[WCN36XX_HAL_IPV6_ADDR_LEN]; + u8 target_ipv6_addr2[WCN36XX_HAL_IPV6_ADDR_LEN]; + + u8 self_addr[ETH_ALEN]; + u8 src_ipv6_addr_valid:1; + u8 target_ipv6_addr1_valid:1; + u8 target_ipv6_addr2_valid:1; + u8 reserved1:5; + + /* make it DWORD aligned */ + u8 reserved2; + + /* slot index for this offload */ + u32 slot_index; + u8 bss_index; +}; + +struct wcn36xx_hal_host_offload_req { + u8 offload_Type; + + /* enable or disable */ + u8 enable; + + union { + u8 host_ipv4_addr[4]; + u8 host_ipv6_addr[WCN36XX_HAL_IPV6_ADDR_LEN]; + } u; +}; + +struct wcn36xx_hal_host_offload_req_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_host_offload_req host_offload_params; + struct wcn36xx_hal_ns_offload_params ns_offload_params; +}; + +/* Packet Types. */ +#define WCN36XX_HAL_KEEP_ALIVE_NULL_PKT 1 +#define WCN36XX_HAL_KEEP_ALIVE_UNSOLICIT_ARP_RSP 2 + +/* Enable or disable keep alive */ +#define WCN36XX_HAL_KEEP_ALIVE_DISABLE 0 +#define WCN36XX_HAL_KEEP_ALIVE_ENABLE 1 +#define WCN36XX_KEEP_ALIVE_TIME_PERIOD 30 /* unit: s */ + +/* Keep Alive request. */ +struct wcn36xx_hal_keep_alive_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 packet_type; + u32 time_period; + u8 host_ipv4_addr[WCN36XX_HAL_IPV4_ADDR_LEN]; + u8 dest_ipv4_addr[WCN36XX_HAL_IPV4_ADDR_LEN]; + u8 dest_addr[ETH_ALEN]; + u8 bss_index; +} __packed; + +struct wcn36xx_hal_rssi_threshold_req_msg { + struct wcn36xx_hal_msg_header header; + + s8 threshold1:8; + s8 threshold2:8; + s8 threshold3:8; + u8 thres1_pos_notify:1; + u8 thres1_neg_notify:1; + u8 thres2_pos_notify:1; + u8 thres2_neg_notify:1; + u8 thres3_pos_notify:1; + u8 thres3_neg_notify:1; + u8 reserved10:2; +}; + +struct wcn36xx_hal_enter_uapsd_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 bk_delivery:1; + u8 be_delivery:1; + u8 vi_delivery:1; + u8 vo_delivery:1; + u8 bk_trigger:1; + u8 be_trigger:1; + u8 vi_trigger:1; + u8 vo_trigger:1; + u8 bss_index; +}; + +struct wcn36xx_hal_exit_uapsd_req_msg { + struct wcn36xx_hal_msg_header header; + u8 bss_index; +}; + +#define WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE 128 +#define WCN36XX_HAL_WOWL_BCAST_MAX_NUM_PATTERNS 16 + +struct wcn36xx_hal_wowl_add_bcast_ptrn_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Pattern ID */ + u8 id; + + /* Pattern byte offset from beginning of the 802.11 packet to start + * of the wake-up pattern */ + u8 byte_Offset; + + /* Non-Zero Pattern size */ + u8 size; + + /* Pattern */ + u8 pattern[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE]; + + /* Non-zero pattern mask size */ + u8 mask_size; + + /* Pattern mask */ + u8 mask[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE]; + + /* Extra pattern */ + u8 extra[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE]; + + /* Extra pattern mask */ + u8 mask_extra[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE]; + + u8 bss_index; +}; + +struct wcn36xx_hal_wow_del_bcast_ptrn_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Pattern ID of the wakeup pattern to be deleted */ + u8 id; + u8 bss_index; +}; + +struct wcn36xx_hal_wowl_enter_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Enables/disables magic packet filtering */ + u8 magic_packet_enable; + + /* Magic pattern */ + u8 magic_pattern[ETH_ALEN]; + + /* Enables/disables packet pattern filtering in firmware. Enabling + * this flag enables broadcast pattern matching in Firmware. If + * unicast pattern matching is also desired, + * ucUcastPatternFilteringEnable flag must be set tot true as well + */ + u8 pattern_filtering_enable; + + /* Enables/disables unicast packet pattern filtering. This flag + * specifies whether we want to do pattern match on unicast packets + * as well and not just broadcast packets. This flag has no effect + * if the ucPatternFilteringEnable (main controlling flag) is set + * to false + */ + u8 ucast_pattern_filtering_enable; + + /* This configuration is valid only when magicPktEnable=1. It + * requests hardware to wake up when it receives the Channel Switch + * Action Frame. + */ + u8 wow_channel_switch_receive; + + /* This configuration is valid only when magicPktEnable=1. It + * requests hardware to wake up when it receives the + * Deauthentication Frame. + */ + u8 wow_deauth_receive; + + /* This configuration is valid only when magicPktEnable=1. It + * requests hardware to wake up when it receives the Disassociation + * Frame. + */ + u8 wow_disassoc_receive; + + /* This configuration is valid only when magicPktEnable=1. It + * requests hardware to wake up when it has missed consecutive + * beacons. This is a hardware register configuration (NOT a + * firmware configuration). + */ + u8 wow_max_missed_beacons; + + /* This configuration is valid only when magicPktEnable=1. This is + * a timeout value in units of microsec. It requests hardware to + * unconditionally wake up after it has stayed in WoWLAN mode for + * some time. Set 0 to disable this feature. + */ + u8 wow_max_sleep; + + /* This configuration directs the WoW packet filtering to look for + * EAP-ID requests embedded in EAPOL frames and use this as a wake + * source. + */ + u8 wow_eap_id_request_enable; + + /* This configuration directs the WoW packet filtering to look for + * EAPOL-4WAY requests and use this as a wake source. + */ + u8 wow_eapol_4way_enable; + + /* This configuration allows a host wakeup on an network scan + * offload match. + */ + u8 wow_net_scan_offload_match; + + /* This configuration allows a host wakeup on any GTK rekeying + * error. + */ + u8 wow_gtk_rekey_error; + + /* This configuration allows a host wakeup on BSS connection loss. + */ + u8 wow_bss_connection_loss; + + u8 bss_index; +}; + +struct wcn36xx_hal_wowl_exit_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 bss_index; +}; + +struct wcn36xx_hal_get_rssi_req_msg { + struct wcn36xx_hal_msg_header header; +}; + +struct wcn36xx_hal_get_roam_rssi_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Valid STA Idx for per STA stats request */ + u32 sta_id; +}; + +struct wcn36xx_hal_set_uapsd_ac_params_req_msg { + struct wcn36xx_hal_msg_header header; + + /* STA index */ + u8 sta_idx; + + /* Access Category */ + u8 ac; + + /* User Priority */ + u8 up; + + /* Service Interval */ + u32 service_interval; + + /* Suspend Interval */ + u32 suspend_interval; + + /* Delay Interval */ + u32 delay_interval; +}; + +struct wcn36xx_hal_configure_rxp_filter_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 set_mcst_bcst_filter_setting; + u8 set_mcst_bcst_filter; +}; + +struct wcn36xx_hal_enter_imps_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_exit_imps_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_enter_bmps_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + u8 bss_index; +} __packed; + +struct wcn36xx_hal_exit_bmps_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + u8 bss_index; +} __packed; + +struct wcn36xx_hal_enter_uapsd_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + u8 bss_index; +}; + +struct wcn36xx_hal_exit_uapsd_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + u8 bss_index; +}; + +struct wcn36xx_hal_rssi_notification_ind_msg { + struct wcn36xx_hal_msg_header header; + + u32 rssi_thres1_pos_cross:1; + u32 rssi_thres1_neg_cross:1; + u32 rssi_thres2_pos_cross:1; + u32 rssi_thres2_neg_cross:1; + u32 rssi_thres3_pos_cross:1; + u32 rssi_thres3_neg_cross:1; + u32 avg_rssi:8; + u32 reserved:18; + +}; + +struct wcn36xx_hal_get_rssio_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + s8 rssi; + +}; + +struct wcn36xx_hal_get_roam_rssi_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + u8 sta_id; + s8 rssi; +}; + +struct wcn36xx_hal_wowl_enter_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + u8 bss_index; +}; + +struct wcn36xx_hal_wowl_exit_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + u8 bss_index; +}; + +struct wcn36xx_hal_add_bcn_filter_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_rem_bcn_filter_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_add_wowl_bcast_ptrn_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + u8 bss_index; +}; + +struct wcn36xx_hal_del_wowl_bcast_ptrn_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + u8 bss_index; +}; + +struct wcn36xx_hal_host_offload_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_keep_alive_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_set_rssi_thresh_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_set_uapsd_ac_params_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_configure_rxp_filter_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct set_max_tx_pwr_req { + struct wcn36xx_hal_msg_header header; + + /* BSSID is needed to identify which session issued this request. + * As the request has power constraints, this should be applied + * only to that session */ + u8 bssid[ETH_ALEN]; + + u8 self_addr[ETH_ALEN]; + + /* In request, power == MaxTx power to be used. */ + u8 power; +}; + +struct set_max_tx_pwr_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* power == tx power used for management frames */ + u8 power; + + /* success or failure */ + u32 status; +}; + +struct set_tx_pwr_req_msg { + struct wcn36xx_hal_msg_header header; + + /* TX Power in milli watts */ + u32 tx_power; + + u8 bss_index; +}; + +struct set_tx_pwr_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct get_tx_pwr_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 sta_id; +}; + +struct get_tx_pwr_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + /* TX Power in milli watts */ + u32 tx_power; +}; + +struct set_p2p_gonoa_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 opp_ps; + u32 ct_window; + u8 count; + u32 duration; + u32 interval; + u32 single_noa_duration; + u8 ps_selection; +}; + +struct set_p2p_gonoa_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_add_sta_self_req { + struct wcn36xx_hal_msg_header header; + + u8 self_addr[ETH_ALEN]; + u32 status; +} __packed; + +struct wcn36xx_hal_add_sta_self_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + /* Self STA Index */ + u8 self_sta_index; + + /* DPU Index (IGTK, PTK, GTK all same) */ + u8 dpu_index; + + /* DPU Signature */ + u8 dpu_signature; +} __packed; + +struct wcn36xx_hal_del_sta_self_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 self_addr[ETH_ALEN]; +} __packed; + +struct wcn36xx_hal_del_sta_self_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /*success or failure */ + u32 status; + + u8 self_addr[ETH_ALEN]; +} __packed; + +struct aggr_add_ts_req { + struct wcn36xx_hal_msg_header header; + + /* Station Index */ + u16 sta_idx; + + /* TSPEC handler uniquely identifying a TSPEC for a STA in a BSS. + * This will carry the bitmap with the bit positions representing + * different AC.s */ + u16 tspec_index; + + /* Tspec info per AC To program TPE with required parameters */ + struct wcn36xx_hal_tspec_ie tspec[WCN36XX_HAL_MAX_AC]; + + /* U-APSD Flags: 1b per AC. Encoded as follows: + b7 b6 b5 b4 b3 b2 b1 b0 = + X X X X BE BK VI VO */ + u8 uapsd; + + /* These parameters are for all the access categories */ + + /* Service Interval */ + u32 service_interval[WCN36XX_HAL_MAX_AC]; + + /* Suspend Interval */ + u32 suspend_interval[WCN36XX_HAL_MAX_AC]; + + /* Delay Interval */ + u32 delay_interval[WCN36XX_HAL_MAX_AC]; +}; + +struct aggr_add_ts_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status0; + + /* FIXME PRIMA for future use for 11R */ + u32 status1; +}; + +struct wcn36xx_hal_configure_apps_cpu_wakeup_state_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 is_apps_cpu_awake; +}; + +struct wcn36xx_hal_configure_apps_cpu_wakeup_state_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_dump_cmd_req_msg { + struct wcn36xx_hal_msg_header header; + + u32 arg1; + u32 arg2; + u32 arg3; + u32 arg4; + u32 arg5; +} __packed; + +struct wcn36xx_hal_dump_cmd_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + /* Length of the responce message */ + u32 rsp_length; + + /* FIXME: Currently considering the the responce will be less than + * 100bytes */ + u8 rsp_buffer[DUMPCMD_RSP_BUFFER]; +} __packed; + +#define WLAN_COEX_IND_DATA_SIZE (4) +#define WLAN_COEX_IND_TYPE_DISABLE_HB_MONITOR (0) +#define WLAN_COEX_IND_TYPE_ENABLE_HB_MONITOR (1) + +struct coex_ind_msg { + struct wcn36xx_hal_msg_header header; + + /* Coex Indication Type */ + u32 type; + + /* Coex Indication Data */ + u32 data[WLAN_COEX_IND_DATA_SIZE]; +}; + +struct wcn36xx_hal_tx_compl_ind_msg { + struct wcn36xx_hal_msg_header header; + + /* Tx Complete Indication Success or Failure */ + u32 status; +}; + +struct wcn36xx_hal_wlan_host_suspend_ind_msg { + struct wcn36xx_hal_msg_header header; + + u32 configured_mcst_bcst_filter_setting; + u32 active_session_count; +}; + +struct wcn36xx_hal_wlan_exclude_unencrpted_ind_msg { + struct wcn36xx_hal_msg_header header; + + u8 dot11_exclude_unencrypted; + u8 bssid[ETH_ALEN]; +}; + +struct noa_attr_ind_msg { + struct wcn36xx_hal_msg_header header; + + u8 index; + u8 opp_ps_flag; + u16 ctwin; + + u16 noa1_interval_count; + u16 bss_index; + u32 noa1_duration; + u32 noa1_interval; + u32 noa1_starttime; + + u16 noa2_interval_count; + u16 reserved2; + u32 noa2_duration; + u32 noa2_interval; + u32 noa2_start_time; + + u32 status; +}; + +struct noa_start_ind_msg { + struct wcn36xx_hal_msg_header header; + + u32 status; + u32 bss_index; +}; + +struct wcn36xx_hal_wlan_host_resume_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 configured_mcst_bcst_filter_setting; +}; + +struct wcn36xx_hal_host_resume_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_del_ba_ind_msg { + struct wcn36xx_hal_msg_header header; + + u16 sta_idx; + + /* Peer MAC Address, whose BA session has timed out */ + u8 peer_addr[ETH_ALEN]; + + /* TID for which a BA session timeout is being triggered */ + u8 ba_tid; + + /* DELBA direction + * 1 - Originator + * 0 - Recipient + */ + u8 direction; + + u32 reason_code; + + /* TO SUPPORT BT-AMP */ + u8 bssid[ETH_ALEN]; +}; + +/* PNO Messages */ + +/* Max number of channels that a network can be found on */ +#define WCN36XX_HAL_PNO_MAX_NETW_CHANNELS 26 + +/* Max number of channels that a network can be found on */ +#define WCN36XX_HAL_PNO_MAX_NETW_CHANNELS_EX 60 + +/* Maximum numbers of networks supported by PNO */ +#define WCN36XX_HAL_PNO_MAX_SUPP_NETWORKS 16 + +/* The number of scan time intervals that can be programmed into PNO */ +#define WCN36XX_HAL_PNO_MAX_SCAN_TIMERS 10 + +/* Maximum size of the probe template */ +#define WCN36XX_HAL_PNO_MAX_PROBE_SIZE 450 + +/* Type of PNO enabling: + * + * Immediate - scanning will start immediately and PNO procedure will be + * repeated based on timer + * + * Suspend - scanning will start at suspend + * + * Resume - scanning will start on system resume + */ +enum pno_mode { + PNO_MODE_IMMEDIATE, + PNO_MODE_ON_SUSPEND, + PNO_MODE_ON_RESUME, + PNO_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +/* Authentication type */ +enum auth_type { + AUTH_TYPE_ANY = 0, + AUTH_TYPE_OPEN_SYSTEM = 1, + + /* Upper layer authentication types */ + AUTH_TYPE_WPA = 2, + AUTH_TYPE_WPA_PSK = 3, + + AUTH_TYPE_RSN = 4, + AUTH_TYPE_RSN_PSK = 5, + AUTH_TYPE_FT_RSN = 6, + AUTH_TYPE_FT_RSN_PSK = 7, + AUTH_TYPE_WAPI_WAI_CERTIFICATE = 8, + AUTH_TYPE_WAPI_WAI_PSK = 9, + + AUTH_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +/* Encryption type */ +enum ed_type { + ED_ANY = 0, + ED_NONE = 1, + ED_WEP = 2, + ED_TKIP = 3, + ED_CCMP = 4, + ED_WPI = 5, + + ED_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +/* SSID broadcast type */ +enum ssid_bcast_type { + BCAST_UNKNOWN = 0, + BCAST_NORMAL = 1, + BCAST_HIDDEN = 2, + + BCAST_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +/* The network description for which PNO will have to look for */ +struct network_type { + /* SSID of the BSS */ + struct wcn36xx_hal_mac_ssid ssid; + + /* Authentication type for the network */ + enum auth_type authentication; + + /* Encryption type for the network */ + enum ed_type encryption; + + /* Indicate the channel on which the Network can be found 0 - if + * all channels */ + u8 channel_count; + u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS]; + + /* Indicates the RSSI threshold for the network to be considered */ + u8 rssi_threshold; +}; + +struct scan_timer { + /* How much it should wait */ + u32 value; + + /* How many times it should repeat that wait value 0 - keep using + * this timer until PNO is disabled */ + u32 repeat; + + /* e.g: 2 3 4 0 - it will wait 2s between consecutive scans for 3 + * times - after that it will wait 4s between consecutive scans + * until disabled */ +}; + +/* The network parameters to be sent to the PNO algorithm */ +struct scan_timers_type { + /* set to 0 if you wish for PNO to use its default telescopic timer */ + u8 count; + + /* A set value represents the amount of time that PNO will wait + * between two consecutive scan procedures If the desired is for a + * uniform timer that fires always at the exact same interval - one + * single value is to be set If there is a desire for a more + * complex - telescopic like timer multiple values can be set - + * once PNO reaches the end of the array it will continue scanning + * at intervals presented by the last value */ + struct scan_timer values[WCN36XX_HAL_PNO_MAX_SCAN_TIMERS]; +}; + +/* Preferred network list request */ +struct set_pref_netw_list_req { + struct wcn36xx_hal_msg_header header; + + /* Enable PNO */ + u32 enable; + + /* Immediate, On Suspend, On Resume */ + enum pno_mode mode; + + /* Number of networks sent for PNO */ + u32 networks_count; + + /* The networks that PNO needs to look for */ + struct network_type networks[WCN36XX_HAL_PNO_MAX_SUPP_NETWORKS]; + + /* The scan timers required for PNO */ + struct scan_timers_type scan_timers; + + /* Probe template for 2.4GHz band */ + u16 band_24g_probe_size; + u8 band_24g_probe_template[WCN36XX_HAL_PNO_MAX_PROBE_SIZE]; + + /* Probe template for 5GHz band */ + u16 band_5g_probe_size; + u8 band_5g_probe_template[WCN36XX_HAL_PNO_MAX_PROBE_SIZE]; +}; + +/* The network description for which PNO will have to look for */ +struct network_type_new { + /* SSID of the BSS */ + struct wcn36xx_hal_mac_ssid ssid; + + /* Authentication type for the network */ + enum auth_type authentication; + + /* Encryption type for the network */ + enum ed_type encryption; + + /* SSID broadcast type, normal, hidden or unknown */ + enum ssid_bcast_type bcast_network_type; + + /* Indicate the channel on which the Network can be found 0 - if + * all channels */ + u8 channel_count; + u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS]; + + /* Indicates the RSSI threshold for the network to be considered */ + u8 rssi_threshold; +}; + +/* Preferred network list request new */ +struct set_pref_netw_list_req_new { + struct wcn36xx_hal_msg_header header; + + /* Enable PNO */ + u32 enable; + + /* Immediate, On Suspend, On Resume */ + enum pno_mode mode; + + /* Number of networks sent for PNO */ + u32 networks_count; + + /* The networks that PNO needs to look for */ + struct network_type_new networks[WCN36XX_HAL_PNO_MAX_SUPP_NETWORKS]; + + /* The scan timers required for PNO */ + struct scan_timers_type scan_timers; + + /* Probe template for 2.4GHz band */ + u16 band_24g_probe_size; + u8 band_24g_probe_template[WCN36XX_HAL_PNO_MAX_PROBE_SIZE]; + + /* Probe template for 5GHz band */ + u16 band_5g_probe_size; + u8 band_5g_probe_template[WCN36XX_HAL_PNO_MAX_PROBE_SIZE]; +}; + +/* Preferred network list response */ +struct set_pref_netw_list_resp { + struct wcn36xx_hal_msg_header header; + + /* status of the request - just to indicate that PNO has + * acknowledged the request and will start scanning */ + u32 status; +}; + +/* Preferred network found indication */ +struct pref_netw_found_ind { + + struct wcn36xx_hal_msg_header header; + + /* Network that was found with the highest RSSI */ + struct wcn36xx_hal_mac_ssid ssid; + + /* Indicates the RSSI */ + u8 rssi; +}; + +/* RSSI Filter request */ +struct set_rssi_filter_req { + struct wcn36xx_hal_msg_header header; + + /* RSSI Threshold */ + u8 rssi_threshold; +}; + +/* Set RSSI filter resp */ +struct set_rssi_filter_resp { + struct wcn36xx_hal_msg_header header; + + /* status of the request */ + u32 status; +}; + +/* Update scan params - sent from host to PNO to be used during PNO + * scanningx */ +struct wcn36xx_hal_update_scan_params_req { + + struct wcn36xx_hal_msg_header header; + + /* Host setting for 11d */ + u8 dot11d_enabled; + + /* Lets PNO know that host has determined the regulatory domain */ + u8 dot11d_resolved; + + /* Channels on which PNO is allowed to scan */ + u8 channel_count; + u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS]; + + /* Minimum channel time */ + u16 active_min_ch_time; + + /* Maximum channel time */ + u16 active_max_ch_time; + + /* Minimum channel time */ + u16 passive_min_ch_time; + + /* Maximum channel time */ + u16 passive_max_ch_time; + + /* Cb State */ + enum phy_chan_bond_state state; +} __packed; + +/* Update scan params - sent from host to PNO to be used during PNO + * scanningx */ +struct update_scan_params_req_ex { + + struct wcn36xx_hal_msg_header header; + + /* Host setting for 11d */ + u8 dot11d_enabled; + + /* Lets PNO know that host has determined the regulatory domain */ + u8 dot11d_resolved; + + /* Channels on which PNO is allowed to scan */ + u8 channel_count; + u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS_EX]; + + /* Minimum channel time */ + u16 active_min_ch_time; + + /* Maximum channel time */ + u16 active_max_ch_time; + + /* Minimum channel time */ + u16 passive_min_ch_time; + + /* Maximum channel time */ + u16 passive_max_ch_time; + + /* Cb State */ + enum phy_chan_bond_state state; +}; + +/* Update scan params - sent from host to PNO to be used during PNO + * scanningx */ +struct wcn36xx_hal_update_scan_params_resp { + + struct wcn36xx_hal_msg_header header; + + /* status of the request */ + u32 status; +} __packed; + +struct wcn36xx_hal_set_tx_per_tracking_req_msg { + struct wcn36xx_hal_msg_header header; + + /* 0: disable, 1:enable */ + u8 tx_per_tracking_enable; + + /* Check period, unit is sec. */ + u8 tx_per_tracking_period; + + /* (Fail TX packet)/(Total TX packet) ratio, the unit is 10%. */ + u8 tx_per_tracking_ratio; + + /* A watermark of check number, once the tx packet exceed this + * number, we do the check, default is 5 */ + u32 tx_per_tracking_watermark; +}; + +struct wcn36xx_hal_set_tx_per_tracking_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + +}; + +struct tx_per_hit_ind_msg { + struct wcn36xx_hal_msg_header header; +}; + +/* Packet Filtering Definitions Begin */ +#define WCN36XX_HAL_PROTOCOL_DATA_LEN 8 +#define WCN36XX_HAL_MAX_NUM_MULTICAST_ADDRESS 240 +#define WCN36XX_HAL_MAX_NUM_FILTERS 20 +#define WCN36XX_HAL_MAX_CMP_PER_FILTER 10 + +enum wcn36xx_hal_receive_packet_filter_type { + HAL_RCV_FILTER_TYPE_INVALID, + HAL_RCV_FILTER_TYPE_FILTER_PKT, + HAL_RCV_FILTER_TYPE_BUFFER_PKT, + HAL_RCV_FILTER_TYPE_MAX_ENUM_SIZE +}; + +enum wcn36xx_hal_rcv_pkt_flt_protocol_type { + HAL_FILTER_PROTO_TYPE_INVALID, + HAL_FILTER_PROTO_TYPE_MAC, + HAL_FILTER_PROTO_TYPE_ARP, + HAL_FILTER_PROTO_TYPE_IPV4, + HAL_FILTER_PROTO_TYPE_IPV6, + HAL_FILTER_PROTO_TYPE_UDP, + HAL_FILTER_PROTO_TYPE_MAX +}; + +enum wcn36xx_hal_rcv_pkt_flt_cmp_flag_type { + HAL_FILTER_CMP_TYPE_INVALID, + HAL_FILTER_CMP_TYPE_EQUAL, + HAL_FILTER_CMP_TYPE_MASK_EQUAL, + HAL_FILTER_CMP_TYPE_NOT_EQUAL, + HAL_FILTER_CMP_TYPE_MAX +}; + +struct wcn36xx_hal_rcv_pkt_filter_params { + u8 protocol_layer; + u8 cmp_flag; + + /* Length of the data to compare */ + u16 data_length; + + /* from start of the respective frame header */ + u8 data_offset; + + /* Reserved field */ + u8 reserved; + + /* Data to compare */ + u8 compare_data[WCN36XX_HAL_PROTOCOL_DATA_LEN]; + + /* Mask to be applied on the received packet data before compare */ + u8 data_mask[WCN36XX_HAL_PROTOCOL_DATA_LEN]; +}; + +struct wcn36xx_hal_sessionized_rcv_pkt_filter_cfg_type { + u8 id; + u8 type; + u8 params_count; + u32 coleasce_time; + u8 bss_index; + struct wcn36xx_hal_rcv_pkt_filter_params params[1]; +}; + +struct wcn36xx_hal_set_rcv_pkt_filter_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 id; + u8 type; + u8 params_count; + u32 coalesce_time; + struct wcn36xx_hal_rcv_pkt_filter_params params[1]; +}; + +struct wcn36xx_hal_rcv_flt_mc_addr_list_type { + /* from start of the respective frame header */ + u8 data_offset; + + u32 mc_addr_count; + u8 mc_addr[ETH_ALEN][WCN36XX_HAL_MAX_NUM_MULTICAST_ADDRESS]; + u8 bss_index; +}; + +struct wcn36xx_hal_set_pkt_filter_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + u8 bss_index; +}; + +struct wcn36xx_hal_rcv_flt_pkt_match_cnt_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 bss_index; +}; + +struct wcn36xx_hal_rcv_flt_pkt_match_cnt { + u8 id; + u32 match_cnt; +}; + +struct wcn36xx_hal_rcv_flt_pkt_match_cnt_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* Success or Failure */ + u32 status; + + u32 match_count; + struct wcn36xx_hal_rcv_flt_pkt_match_cnt + matches[WCN36XX_HAL_MAX_NUM_FILTERS]; + u8 bss_index; +}; + +struct wcn36xx_hal_rcv_flt_pkt_clear_param { + /* only valid for response message */ + u32 status; + u8 id; + u8 bss_index; +}; + +struct wcn36xx_hal_rcv_flt_pkt_clear_req_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_rcv_flt_pkt_clear_param param; +}; + +struct wcn36xx_hal_rcv_flt_pkt_clear_rsp_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_rcv_flt_pkt_clear_param param; +}; + +struct wcn36xx_hal_rcv_flt_pkt_set_mc_list_req_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_rcv_flt_mc_addr_list_type mc_addr_list; +}; + +struct wcn36xx_hal_rcv_flt_pkt_set_mc_list_rsp_msg { + struct wcn36xx_hal_msg_header header; + u32 status; + u8 bss_index; +}; + +/* Packet Filtering Definitions End */ + +struct wcn36xx_hal_set_power_params_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Ignore DTIM */ + u32 ignore_dtim; + + /* DTIM Period */ + u32 dtim_period; + + /* Listen Interval */ + u32 listen_interval; + + /* Broadcast Multicast Filter */ + u32 bcast_mcast_filter; + + /* Beacon Early Termination */ + u32 enable_bet; + + /* Beacon Early Termination Interval */ + u32 bet_interval; +} __packed; + +struct wcn36xx_hal_set_power_params_resp { + + struct wcn36xx_hal_msg_header header; + + /* status of the request */ + u32 status; +} __packed; + +/* Capability bitmap exchange definitions and macros starts */ + +enum place_holder_in_cap_bitmap { + MCC = 0, + P2P = 1, + DOT11AC = 2, + SLM_SESSIONIZATION = 3, + DOT11AC_OPMODE = 4, + SAP32STA = 5, + TDLS = 6, + P2P_GO_NOA_DECOUPLE_INIT_SCAN = 7, + WLANACTIVE_OFFLOAD = 8, + BEACON_OFFLOAD = 9, + SCAN_OFFLOAD = 10, + ROAM_OFFLOAD = 11, + BCN_MISS_OFFLOAD = 12, + STA_POWERSAVE = 13, + STA_ADVANCED_PWRSAVE = 14, + AP_UAPSD = 15, + AP_DFS = 16, + BLOCKACK = 17, + PHY_ERR = 18, + BCN_FILTER = 19, + RTT = 20, + RATECTRL = 21, + WOW = 22, + MAX_FEATURE_SUPPORTED = 128, +}; + +struct wcn36xx_hal_feat_caps_msg { + + struct wcn36xx_hal_msg_header header; + + u32 feat_caps[4]; +} __packed; + +/* status codes to help debug rekey failures */ +enum gtk_rekey_status { + WCN36XX_HAL_GTK_REKEY_STATUS_SUCCESS = 0, + + /* rekey detected, but not handled */ + WCN36XX_HAL_GTK_REKEY_STATUS_NOT_HANDLED = 1, + + /* MIC check error on M1 */ + WCN36XX_HAL_GTK_REKEY_STATUS_MIC_ERROR = 2, + + /* decryption error on M1 */ + WCN36XX_HAL_GTK_REKEY_STATUS_DECRYPT_ERROR = 3, + + /* M1 replay detected */ + WCN36XX_HAL_GTK_REKEY_STATUS_REPLAY_ERROR = 4, + + /* missing GTK key descriptor in M1 */ + WCN36XX_HAL_GTK_REKEY_STATUS_MISSING_KDE = 5, + + /* missing iGTK key descriptor in M1 */ + WCN36XX_HAL_GTK_REKEY_STATUS_MISSING_IGTK_KDE = 6, + + /* key installation error */ + WCN36XX_HAL_GTK_REKEY_STATUS_INSTALL_ERROR = 7, + + /* iGTK key installation error */ + WCN36XX_HAL_GTK_REKEY_STATUS_IGTK_INSTALL_ERROR = 8, + + /* GTK rekey M2 response TX error */ + WCN36XX_HAL_GTK_REKEY_STATUS_RESP_TX_ERROR = 9, + + /* non-specific general error */ + WCN36XX_HAL_GTK_REKEY_STATUS_GEN_ERROR = 255 +}; + +/* wake reason types */ +enum wake_reason_type { + WCN36XX_HAL_WAKE_REASON_NONE = 0, + + /* magic packet match */ + WCN36XX_HAL_WAKE_REASON_MAGIC_PACKET = 1, + + /* host defined pattern match */ + WCN36XX_HAL_WAKE_REASON_PATTERN_MATCH = 2, + + /* EAP-ID frame detected */ + WCN36XX_HAL_WAKE_REASON_EAPID_PACKET = 3, + + /* start of EAPOL 4-way handshake detected */ + WCN36XX_HAL_WAKE_REASON_EAPOL4WAY_PACKET = 4, + + /* network scan offload match */ + WCN36XX_HAL_WAKE_REASON_NETSCAN_OFFL_MATCH = 5, + + /* GTK rekey status wakeup (see status) */ + WCN36XX_HAL_WAKE_REASON_GTK_REKEY_STATUS = 6, + + /* BSS connection lost */ + WCN36XX_HAL_WAKE_REASON_BSS_CONN_LOST = 7, +}; + +/* + Wake Packet which is saved at tWakeReasonParams.DataStart + This data is sent for any wake reasons that involve a packet-based wakeup : + + WCN36XX_HAL_WAKE_REASON_TYPE_MAGIC_PACKET + WCN36XX_HAL_WAKE_REASON_TYPE_PATTERN_MATCH + WCN36XX_HAL_WAKE_REASON_TYPE_EAPID_PACKET + WCN36XX_HAL_WAKE_REASON_TYPE_EAPOL4WAY_PACKET + WCN36XX_HAL_WAKE_REASON_TYPE_GTK_REKEY_STATUS + + The information is provided to the host for auditing and debug purposes + +*/ + +/* Wake reason indication */ +struct wcn36xx_hal_wake_reason_ind { + struct wcn36xx_hal_msg_header header; + + /* see tWakeReasonType */ + u32 reason; + + /* argument specific to the reason type */ + u32 reason_arg; + + /* length of optional data stored in this message, in case HAL + * truncates the data (i.e. data packets) this length will be less + * than the actual length */ + u32 stored_data_len; + + /* actual length of data */ + u32 actual_data_len; + + /* variable length start of data (length == storedDataLen) see + * specific wake type */ + u8 data_start[1]; + + u32 bss_index:8; + u32 reserved:24; +}; + +#define WCN36XX_HAL_GTK_KEK_BYTES 16 +#define WCN36XX_HAL_GTK_KCK_BYTES 16 + +#define WCN36XX_HAL_GTK_OFFLOAD_FLAGS_DISABLE (1 << 0) + +#define GTK_SET_BSS_KEY_TAG 0x1234AA55 + +struct wcn36xx_hal_gtk_offload_req_msg { + struct wcn36xx_hal_msg_header header; + + /* optional flags */ + u32 flags; + + /* Key confirmation key */ + u8 kck[WCN36XX_HAL_GTK_KCK_BYTES]; + + /* key encryption key */ + u8 kek[WCN36XX_HAL_GTK_KEK_BYTES]; + + /* replay counter */ + u64 key_replay_counter; + + u8 bss_index; +}; + +struct wcn36xx_hal_gtk_offload_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + u8 bss_index; +}; + +struct wcn36xx_hal_gtk_offload_get_info_req_msg { + struct wcn36xx_hal_msg_header header; + u8 bss_index; +}; + +struct wcn36xx_hal_gtk_offload_get_info_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + /* last rekey status when the rekey was offloaded */ + u32 last_rekey_status; + + /* current replay counter value */ + u64 key_replay_counter; + + /* total rekey attempts */ + u32 total_rekey_count; + + /* successful GTK rekeys */ + u32 gtk_rekey_count; + + /* successful iGTK rekeys */ + u32 igtk_rekey_count; + + u8 bss_index; +}; + +struct dhcp_info { + /* Indicates the device mode which indicates about the DHCP activity */ + u8 device_mode; + + u8 addr[ETH_ALEN]; +}; + +struct dhcp_ind_status { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +/* + * Thermal Mitigation mode of operation. + * + * WCN36XX_HAL_THERMAL_MITIGATION_MODE_0 - Based on AMPDU disabling aggregation + * + * WCN36XX_HAL_THERMAL_MITIGATION_MODE_1 - Based on AMPDU disabling aggregation + * and reducing transmit power + * + * WCN36XX_HAL_THERMAL_MITIGATION_MODE_2 - Not supported */ +enum wcn36xx_hal_thermal_mitigation_mode_type { + HAL_THERMAL_MITIGATION_MODE_INVALID = -1, + HAL_THERMAL_MITIGATION_MODE_0, + HAL_THERMAL_MITIGATION_MODE_1, + HAL_THERMAL_MITIGATION_MODE_2, + HAL_THERMAL_MITIGATION_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE, +}; + + +/* + * Thermal Mitigation level. + * Note the levels are incremental i.e WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_2 = + * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_0 + + * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_1 + * + * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_0 - lowest level of thermal mitigation. + * This level indicates normal mode of operation + * + * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_1 - 1st level of thermal mitigation + * + * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_2 - 2nd level of thermal mitigation + * + * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_3 - 3rd level of thermal mitigation + * + * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_4 - 4th level of thermal mitigation + */ +enum wcn36xx_hal_thermal_mitigation_level_type { + HAL_THERMAL_MITIGATION_LEVEL_INVALID = -1, + HAL_THERMAL_MITIGATION_LEVEL_0, + HAL_THERMAL_MITIGATION_LEVEL_1, + HAL_THERMAL_MITIGATION_LEVEL_2, + HAL_THERMAL_MITIGATION_LEVEL_3, + HAL_THERMAL_MITIGATION_LEVEL_4, + HAL_THERMAL_MITIGATION_LEVEL_MAX = WCN36XX_HAL_MAX_ENUM_SIZE, +}; + + +/* WCN36XX_HAL_SET_THERMAL_MITIGATION_REQ */ +struct set_thermal_mitigation_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Thermal Mitigation Operation Mode */ + enum wcn36xx_hal_thermal_mitigation_mode_type mode; + + /* Thermal Mitigation Level */ + enum wcn36xx_hal_thermal_mitigation_level_type level; +}; + +struct set_thermal_mitigation_resp { + + struct wcn36xx_hal_msg_header header; + + /* status of the request */ + u32 status; +}; + +/* Per STA Class B Statistics. Class B statistics are STA TX/RX stats + * provided to FW from Host via periodic messages */ +struct stats_class_b_ind { + struct wcn36xx_hal_msg_header header; + + /* Duration over which this stats was collected */ + u32 duration; + + /* Per STA Stats */ + + /* TX stats */ + u32 tx_bytes_pushed; + u32 tx_packets_pushed; + + /* RX stats */ + u32 rx_bytes_rcvd; + u32 rx_packets_rcvd; + u32 rx_time_total; +}; + +#endif /* _HAL_H_ */ diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c new file mode 100644 index 000000000000..7839b31e4826 --- /dev/null +++ b/drivers/net/wireless/ath/wcn36xx/main.c @@ -0,0 +1,1036 @@ +/* + * Copyright (c) 2013 Eugene Krasnikov + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include "wcn36xx.h" + +unsigned int wcn36xx_dbg_mask; +module_param_named(debug_mask, wcn36xx_dbg_mask, uint, 0644); +MODULE_PARM_DESC(debug_mask, "Debugging mask"); + +#define CHAN2G(_freq, _idx) { \ + .band = IEEE80211_BAND_2GHZ, \ + .center_freq = (_freq), \ + .hw_value = (_idx), \ + .max_power = 25, \ +} + +#define CHAN5G(_freq, _idx) { \ + .band = IEEE80211_BAND_5GHZ, \ + .center_freq = (_freq), \ + .hw_value = (_idx), \ + .max_power = 25, \ +} + +/* The wcn firmware expects channel values to matching + * their mnemonic values. So use these for .hw_value. */ +static struct ieee80211_channel wcn_2ghz_channels[] = { + CHAN2G(2412, 1), /* Channel 1 */ + CHAN2G(2417, 2), /* Channel 2 */ + CHAN2G(2422, 3), /* Channel 3 */ + CHAN2G(2427, 4), /* Channel 4 */ + CHAN2G(2432, 5), /* Channel 5 */ + CHAN2G(2437, 6), /* Channel 6 */ + CHAN2G(2442, 7), /* Channel 7 */ + CHAN2G(2447, 8), /* Channel 8 */ + CHAN2G(2452, 9), /* Channel 9 */ + CHAN2G(2457, 10), /* Channel 10 */ + CHAN2G(2462, 11), /* Channel 11 */ + CHAN2G(2467, 12), /* Channel 12 */ + CHAN2G(2472, 13), /* Channel 13 */ + CHAN2G(2484, 14) /* Channel 14 */ + +}; + +static struct ieee80211_channel wcn_5ghz_channels[] = { + CHAN5G(5180, 36), + CHAN5G(5200, 40), + CHAN5G(5220, 44), + CHAN5G(5240, 48), + CHAN5G(5260, 52), + CHAN5G(5280, 56), + CHAN5G(5300, 60), + CHAN5G(5320, 64), + CHAN5G(5500, 100), + CHAN5G(5520, 104), + CHAN5G(5540, 108), + CHAN5G(5560, 112), + CHAN5G(5580, 116), + CHAN5G(5600, 120), + CHAN5G(5620, 124), + CHAN5G(5640, 128), + CHAN5G(5660, 132), + CHAN5G(5700, 140), + CHAN5G(5745, 149), + CHAN5G(5765, 153), + CHAN5G(5785, 157), + CHAN5G(5805, 161), + CHAN5G(5825, 165) +}; + +#define RATE(_bitrate, _hw_rate, _flags) { \ + .bitrate = (_bitrate), \ + .flags = (_flags), \ + .hw_value = (_hw_rate), \ + .hw_value_short = (_hw_rate) \ +} + +static struct ieee80211_rate wcn_2ghz_rates[] = { + RATE(10, HW_RATE_INDEX_1MBPS, 0), + RATE(20, HW_RATE_INDEX_2MBPS, IEEE80211_RATE_SHORT_PREAMBLE), + RATE(55, HW_RATE_INDEX_5_5MBPS, IEEE80211_RATE_SHORT_PREAMBLE), + RATE(110, HW_RATE_INDEX_11MBPS, IEEE80211_RATE_SHORT_PREAMBLE), + RATE(60, HW_RATE_INDEX_6MBPS, 0), + RATE(90, HW_RATE_INDEX_9MBPS, 0), + RATE(120, HW_RATE_INDEX_12MBPS, 0), + RATE(180, HW_RATE_INDEX_18MBPS, 0), + RATE(240, HW_RATE_INDEX_24MBPS, 0), + RATE(360, HW_RATE_INDEX_36MBPS, 0), + RATE(480, HW_RATE_INDEX_48MBPS, 0), + RATE(540, HW_RATE_INDEX_54MBPS, 0) +}; + +static struct ieee80211_rate wcn_5ghz_rates[] = { + RATE(60, HW_RATE_INDEX_6MBPS, 0), + RATE(90, HW_RATE_INDEX_9MBPS, 0), + RATE(120, HW_RATE_INDEX_12MBPS, 0), + RATE(180, HW_RATE_INDEX_18MBPS, 0), + RATE(240, HW_RATE_INDEX_24MBPS, 0), + RATE(360, HW_RATE_INDEX_36MBPS, 0), + RATE(480, HW_RATE_INDEX_48MBPS, 0), + RATE(540, HW_RATE_INDEX_54MBPS, 0) +}; + +static struct ieee80211_supported_band wcn_band_2ghz = { + .channels = wcn_2ghz_channels, + .n_channels = ARRAY_SIZE(wcn_2ghz_channels), + .bitrates = wcn_2ghz_rates, + .n_bitrates = ARRAY_SIZE(wcn_2ghz_rates), + .ht_cap = { + .cap = IEEE80211_HT_CAP_GRN_FLD | + IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_DSSSCCK40 | + IEEE80211_HT_CAP_LSIG_TXOP_PROT, + .ht_supported = true, + .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K, + .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, + .mcs = { + .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, + .rx_highest = cpu_to_le16(72), + .tx_params = IEEE80211_HT_MCS_TX_DEFINED, + } + } +}; + +static struct ieee80211_supported_band wcn_band_5ghz = { + .channels = wcn_5ghz_channels, + .n_channels = ARRAY_SIZE(wcn_5ghz_channels), + .bitrates = wcn_5ghz_rates, + .n_bitrates = ARRAY_SIZE(wcn_5ghz_rates), + .ht_cap = { + .cap = IEEE80211_HT_CAP_GRN_FLD | + IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_DSSSCCK40 | + IEEE80211_HT_CAP_LSIG_TXOP_PROT | + IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_SUP_WIDTH_20_40, + .ht_supported = true, + .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K, + .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, + .mcs = { + .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, + .rx_highest = cpu_to_le16(72), + .tx_params = IEEE80211_HT_MCS_TX_DEFINED, + } + } +}; + +#ifdef CONFIG_PM + +static const struct wiphy_wowlan_support wowlan_support = { + .flags = WIPHY_WOWLAN_ANY +}; + +#endif + +static inline u8 get_sta_index(struct ieee80211_vif *vif, + struct wcn36xx_sta *sta_priv) +{ + return NL80211_IFTYPE_STATION == vif->type ? + sta_priv->bss_sta_index : + sta_priv->sta_index; +} + +static int wcn36xx_start(struct ieee80211_hw *hw) +{ + struct wcn36xx *wcn = hw->priv; + int ret; + + wcn36xx_dbg(WCN36XX_DBG_MAC, "mac start\n"); + + /* SMD initialization */ + ret = wcn36xx_smd_open(wcn); + if (ret) { + wcn36xx_err("Failed to open smd channel: %d\n", ret); + goto out_err; + } + + /* Allocate memory pools for Mgmt BD headers and Data BD headers */ + ret = wcn36xx_dxe_allocate_mem_pools(wcn); + if (ret) { + wcn36xx_err("Failed to alloc DXE mempool: %d\n", ret); + goto out_smd_close; + } + + ret = wcn36xx_dxe_alloc_ctl_blks(wcn); + if (ret) { + wcn36xx_err("Failed to alloc DXE ctl blocks: %d\n", ret); + goto out_free_dxe_pool; + } + + wcn->hal_buf = kmalloc(WCN36XX_HAL_BUF_SIZE, GFP_KERNEL); + if (!wcn->hal_buf) { + wcn36xx_err("Failed to allocate smd buf\n"); + ret = -ENOMEM; + goto out_free_dxe_ctl; + } + + ret = wcn36xx_smd_load_nv(wcn); + if (ret) { + wcn36xx_err("Failed to push NV to chip\n"); + goto out_free_smd_buf; + } + + ret = wcn36xx_smd_start(wcn); + if (ret) { + wcn36xx_err("Failed to start chip\n"); + goto out_free_smd_buf; + } + + /* DMA channel initialization */ + ret = wcn36xx_dxe_init(wcn); + if (ret) { + wcn36xx_err("DXE init failed\n"); + goto out_smd_stop; + } + + wcn36xx_debugfs_init(wcn); + + if (!wcn36xx_is_fw_version(wcn, 1, 2, 2, 24)) { + ret = wcn36xx_smd_feature_caps_exchange(wcn); + if (ret) + wcn36xx_warn("Exchange feature caps failed\n"); + } + INIT_LIST_HEAD(&wcn->vif_list); + return 0; + +out_smd_stop: + wcn36xx_smd_stop(wcn); +out_free_smd_buf: + kfree(wcn->hal_buf); +out_free_dxe_pool: + wcn36xx_dxe_free_mem_pools(wcn); +out_free_dxe_ctl: + wcn36xx_dxe_free_ctl_blks(wcn); +out_smd_close: + wcn36xx_smd_close(wcn); +out_err: + return ret; +} + +static void wcn36xx_stop(struct ieee80211_hw *hw) +{ + struct wcn36xx *wcn = hw->priv; + + wcn36xx_dbg(WCN36XX_DBG_MAC, "mac stop\n"); + + wcn36xx_debugfs_exit(wcn); + wcn36xx_smd_stop(wcn); + wcn36xx_dxe_deinit(wcn); + wcn36xx_smd_close(wcn); + + wcn36xx_dxe_free_mem_pools(wcn); + wcn36xx_dxe_free_ctl_blks(wcn); + + kfree(wcn->hal_buf); +} + +static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed) +{ + struct wcn36xx *wcn = hw->priv; + struct ieee80211_vif *vif = NULL; + struct wcn36xx_vif *tmp; + + wcn36xx_dbg(WCN36XX_DBG_MAC, "mac config changed 0x%08x\n", changed); + + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + int ch = WCN36XX_HW_CHANNEL(wcn); + wcn36xx_dbg(WCN36XX_DBG_MAC, "wcn36xx_config channel switch=%d\n", + ch); + list_for_each_entry(tmp, &wcn->vif_list, list) { + vif = container_of((void *)tmp, + struct ieee80211_vif, + drv_priv); + wcn36xx_smd_switch_channel(wcn, vif, ch); + } + } + + return 0; +} + +#define WCN36XX_SUPPORTED_FILTERS (0) + +static void wcn36xx_configure_filter(struct ieee80211_hw *hw, + unsigned int changed, + unsigned int *total, u64 multicast) +{ + wcn36xx_dbg(WCN36XX_DBG_MAC, "mac configure filter\n"); + + *total &= WCN36XX_SUPPORTED_FILTERS; +} + +static void wcn36xx_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) +{ + struct wcn36xx *wcn = hw->priv; + struct wcn36xx_sta *sta_priv = NULL; + + if (control->sta) + sta_priv = (struct wcn36xx_sta *)control->sta->drv_priv; + + if (wcn36xx_start_tx(wcn, sta_priv, skb)) + ieee80211_free_txskb(wcn->hw, skb); +} + +static int wcn36xx_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key_conf) +{ + struct wcn36xx *wcn = hw->priv; + struct wcn36xx_vif *vif_priv = (struct wcn36xx_vif *)vif->drv_priv; + struct wcn36xx_sta *sta_priv = vif_priv->sta; + int ret = 0; + u8 key[WLAN_MAX_KEY_LEN]; + + wcn36xx_dbg(WCN36XX_DBG_MAC, "mac80211 set key\n"); + wcn36xx_dbg(WCN36XX_DBG_MAC, "Key: cmd=0x%x algo:0x%x, id:%d, len:%d flags 0x%x\n", + cmd, key_conf->cipher, key_conf->keyidx, + key_conf->keylen, key_conf->flags); + wcn36xx_dbg_dump(WCN36XX_DBG_MAC, "KEY: ", + key_conf->key, + key_conf->keylen); + + switch (key_conf->cipher) { + case WLAN_CIPHER_SUITE_WEP40: + vif_priv->encrypt_type = WCN36XX_HAL_ED_WEP40; + break; + case WLAN_CIPHER_SUITE_WEP104: + vif_priv->encrypt_type = WCN36XX_HAL_ED_WEP40; + break; + case WLAN_CIPHER_SUITE_CCMP: + vif_priv->encrypt_type = WCN36XX_HAL_ED_CCMP; + break; + case WLAN_CIPHER_SUITE_TKIP: + vif_priv->encrypt_type = WCN36XX_HAL_ED_TKIP; + break; + default: + wcn36xx_err("Unsupported key type 0x%x\n", + key_conf->cipher); + ret = -EOPNOTSUPP; + goto out; + } + + switch (cmd) { + case SET_KEY: + if (WCN36XX_HAL_ED_TKIP == vif_priv->encrypt_type) { + /* + * Supplicant is sending key in the wrong order: + * Temporal Key (16 b) - TX MIC (8 b) - RX MIC (8 b) + * but HW expects it to be in the order as described in + * IEEE 802.11 spec (see chapter 11.7) like this: + * Temporal Key (16 b) - RX MIC (8 b) - TX MIC (8 b) + */ + memcpy(key, key_conf->key, 16); + memcpy(key + 16, key_conf->key + 24, 8); + memcpy(key + 24, key_conf->key + 16, 8); + } else { + memcpy(key, key_conf->key, key_conf->keylen); + } + + if (IEEE80211_KEY_FLAG_PAIRWISE & key_conf->flags) { + sta_priv->is_data_encrypted = true; + /* Reconfigure bss with encrypt_type */ + if (NL80211_IFTYPE_STATION == vif->type) + wcn36xx_smd_config_bss(wcn, + vif, + sta, + sta->addr, + true); + + wcn36xx_smd_set_stakey(wcn, + vif_priv->encrypt_type, + key_conf->keyidx, + key_conf->keylen, + key, + get_sta_index(vif, sta_priv)); + } else { + wcn36xx_smd_set_bsskey(wcn, + vif_priv->encrypt_type, + key_conf->keyidx, + key_conf->keylen, + key); + if ((WLAN_CIPHER_SUITE_WEP40 == key_conf->cipher) || + (WLAN_CIPHER_SUITE_WEP104 == key_conf->cipher)) { + sta_priv->is_data_encrypted = true; + wcn36xx_smd_set_stakey(wcn, + vif_priv->encrypt_type, + key_conf->keyidx, + key_conf->keylen, + key, + get_sta_index(vif, sta_priv)); + } + } + break; + case DISABLE_KEY: + if (!(IEEE80211_KEY_FLAG_PAIRWISE & key_conf->flags)) { + wcn36xx_smd_remove_bsskey(wcn, + vif_priv->encrypt_type, + key_conf->keyidx); + } else { + sta_priv->is_data_encrypted = false; + /* do not remove key if disassociated */ + if (sta_priv->aid) + wcn36xx_smd_remove_stakey(wcn, + vif_priv->encrypt_type, + key_conf->keyidx, + get_sta_index(vif, sta_priv)); + } + break; + default: + wcn36xx_err("Unsupported key cmd 0x%x\n", cmd); + ret = -EOPNOTSUPP; + goto out; + break; + } + +out: + return ret; +} + +static void wcn36xx_sw_scan_start(struct ieee80211_hw *hw) +{ + struct wcn36xx *wcn = hw->priv; + + wcn36xx_smd_init_scan(wcn, HAL_SYS_MODE_SCAN); + wcn36xx_smd_start_scan(wcn); +} + +static void wcn36xx_sw_scan_complete(struct ieee80211_hw *hw) +{ + struct wcn36xx *wcn = hw->priv; + + wcn36xx_smd_end_scan(wcn); + wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN); +} + +static void wcn36xx_update_allowed_rates(struct ieee80211_sta *sta, + enum ieee80211_band band) +{ + int i, size; + u16 *rates_table; + struct wcn36xx_sta *sta_priv = (struct wcn36xx_sta *)sta->drv_priv; + u32 rates = sta->supp_rates[band]; + + memset(&sta_priv->supported_rates, 0, + sizeof(sta_priv->supported_rates)); + sta_priv->supported_rates.op_rate_mode = STA_11n; + + size = ARRAY_SIZE(sta_priv->supported_rates.dsss_rates); + rates_table = sta_priv->supported_rates.dsss_rates; + if (band == IEEE80211_BAND_2GHZ) { + for (i = 0; i < size; i++) { + if (rates & 0x01) { + rates_table[i] = wcn_2ghz_rates[i].hw_value; + rates = rates >> 1; + } + } + } + + size = ARRAY_SIZE(sta_priv->supported_rates.ofdm_rates); + rates_table = sta_priv->supported_rates.ofdm_rates; + for (i = 0; i < size; i++) { + if (rates & 0x01) { + rates_table[i] = wcn_5ghz_rates[i].hw_value; + rates = rates >> 1; + } + } + + if (sta->ht_cap.ht_supported) { + BUILD_BUG_ON(sizeof(sta->ht_cap.mcs.rx_mask) > + sizeof(sta_priv->supported_rates.supported_mcs_set)); + memcpy(sta_priv->supported_rates.supported_mcs_set, + sta->ht_cap.mcs.rx_mask, + sizeof(sta->ht_cap.mcs.rx_mask)); + } +} +void wcn36xx_set_default_rates(struct wcn36xx_hal_supported_rates *rates) +{ + u16 ofdm_rates[WCN36XX_HAL_NUM_OFDM_RATES] = { + HW_RATE_INDEX_6MBPS, + HW_RATE_INDEX_9MBPS, + HW_RATE_INDEX_12MBPS, + HW_RATE_INDEX_18MBPS, + HW_RATE_INDEX_24MBPS, + HW_RATE_INDEX_36MBPS, + HW_RATE_INDEX_48MBPS, + HW_RATE_INDEX_54MBPS + }; + u16 dsss_rates[WCN36XX_HAL_NUM_DSSS_RATES] = { + HW_RATE_INDEX_1MBPS, + HW_RATE_INDEX_2MBPS, + HW_RATE_INDEX_5_5MBPS, + HW_RATE_INDEX_11MBPS + }; + + rates->op_rate_mode = STA_11n; + memcpy(rates->dsss_rates, dsss_rates, + sizeof(*dsss_rates) * WCN36XX_HAL_NUM_DSSS_RATES); + memcpy(rates->ofdm_rates, ofdm_rates, + sizeof(*ofdm_rates) * WCN36XX_HAL_NUM_OFDM_RATES); + rates->supported_mcs_set[0] = 0xFF; +} +static void wcn36xx_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changed) +{ + struct wcn36xx *wcn = hw->priv; + struct sk_buff *skb = NULL; + u16 tim_off, tim_len; + enum wcn36xx_hal_link_state link_state; + struct wcn36xx_vif *vif_priv = (struct wcn36xx_vif *)vif->drv_priv; + + wcn36xx_dbg(WCN36XX_DBG_MAC, "mac bss info changed vif %p changed 0x%08x\n", + vif, changed); + + if (changed & BSS_CHANGED_BEACON_INFO) { + wcn36xx_dbg(WCN36XX_DBG_MAC, + "mac bss changed dtim period %d\n", + bss_conf->dtim_period); + + vif_priv->dtim_period = bss_conf->dtim_period; + } + + if (changed & BSS_CHANGED_PS) { + wcn36xx_dbg(WCN36XX_DBG_MAC, + "mac bss PS set %d\n", + bss_conf->ps); + if (bss_conf->ps) { + wcn36xx_pmc_enter_bmps_state(wcn, vif); + } else { + wcn36xx_pmc_exit_bmps_state(wcn, vif); + } + } + + if (changed & BSS_CHANGED_BSSID) { + wcn36xx_dbg(WCN36XX_DBG_MAC, "mac bss changed_bssid %pM\n", + bss_conf->bssid); + + if (!is_zero_ether_addr(bss_conf->bssid)) { + vif_priv->is_joining = true; + vif_priv->bss_index = 0xff; + wcn36xx_smd_join(wcn, bss_conf->bssid, + vif->addr, WCN36XX_HW_CHANNEL(wcn)); + wcn36xx_smd_config_bss(wcn, vif, NULL, + bss_conf->bssid, false); + } else { + vif_priv->is_joining = false; + wcn36xx_smd_delete_bss(wcn, vif); + } + } + + if (changed & BSS_CHANGED_SSID) { + wcn36xx_dbg(WCN36XX_DBG_MAC, + "mac bss changed ssid\n"); + wcn36xx_dbg_dump(WCN36XX_DBG_MAC, "ssid ", + bss_conf->ssid, bss_conf->ssid_len); + + vif_priv->ssid.length = bss_conf->ssid_len; + memcpy(&vif_priv->ssid.ssid, + bss_conf->ssid, + bss_conf->ssid_len); + } + + if (changed & BSS_CHANGED_ASSOC) { + vif_priv->is_joining = false; + if (bss_conf->assoc) { + struct ieee80211_sta *sta; + struct wcn36xx_sta *sta_priv; + + wcn36xx_dbg(WCN36XX_DBG_MAC, + "mac assoc bss %pM vif %pM AID=%d\n", + bss_conf->bssid, + vif->addr, + bss_conf->aid); + + rcu_read_lock(); + sta = ieee80211_find_sta(vif, bss_conf->bssid); + if (!sta) { + wcn36xx_err("sta %pM is not found\n", + bss_conf->bssid); + rcu_read_unlock(); + goto out; + } + sta_priv = (struct wcn36xx_sta *)sta->drv_priv; + + wcn36xx_update_allowed_rates(sta, WCN36XX_BAND(wcn)); + + wcn36xx_smd_set_link_st(wcn, bss_conf->bssid, + vif->addr, + WCN36XX_HAL_LINK_POSTASSOC_STATE); + wcn36xx_smd_config_bss(wcn, vif, sta, + bss_conf->bssid, + true); + sta_priv->aid = bss_conf->aid; + /* + * config_sta must be called from because this is the + * place where AID is available. + */ + wcn36xx_smd_config_sta(wcn, vif, sta); + rcu_read_unlock(); + } else { + wcn36xx_dbg(WCN36XX_DBG_MAC, + "disassociated bss %pM vif %pM AID=%d\n", + bss_conf->bssid, + vif->addr, + bss_conf->aid); + wcn36xx_smd_set_link_st(wcn, + bss_conf->bssid, + vif->addr, + WCN36XX_HAL_LINK_IDLE_STATE); + } + } + + if (changed & BSS_CHANGED_AP_PROBE_RESP) { + wcn36xx_dbg(WCN36XX_DBG_MAC, "mac bss changed ap probe resp\n"); + skb = ieee80211_proberesp_get(hw, vif); + if (!skb) { + wcn36xx_err("failed to alloc probereq skb\n"); + goto out; + } + + wcn36xx_smd_update_proberesp_tmpl(wcn, vif, skb); + dev_kfree_skb(skb); + } + + if (changed & BSS_CHANGED_BEACON_ENABLED) { + wcn36xx_dbg(WCN36XX_DBG_MAC, + "mac bss changed beacon enabled %d\n", + bss_conf->enable_beacon); + + if (bss_conf->enable_beacon) { + vif_priv->bss_index = 0xff; + wcn36xx_smd_config_bss(wcn, vif, NULL, + vif->addr, false); + skb = ieee80211_beacon_get_tim(hw, vif, &tim_off, + &tim_len); + if (!skb) { + wcn36xx_err("failed to alloc beacon skb\n"); + goto out; + } + wcn36xx_smd_send_beacon(wcn, vif, skb, tim_off, 0); + dev_kfree_skb(skb); + + if (vif->type == NL80211_IFTYPE_ADHOC || + vif->type == NL80211_IFTYPE_MESH_POINT) + link_state = WCN36XX_HAL_LINK_IBSS_STATE; + else + link_state = WCN36XX_HAL_LINK_AP_STATE; + + wcn36xx_smd_set_link_st(wcn, vif->addr, vif->addr, + link_state); + } else { + wcn36xx_smd_set_link_st(wcn, vif->addr, vif->addr, + WCN36XX_HAL_LINK_IDLE_STATE); + wcn36xx_smd_delete_bss(wcn, vif); + } + } +out: + return; +} + +/* this is required when using IEEE80211_HW_HAS_RATE_CONTROL */ +static int wcn36xx_set_rts_threshold(struct ieee80211_hw *hw, u32 value) +{ + struct wcn36xx *wcn = hw->priv; + wcn36xx_dbg(WCN36XX_DBG_MAC, "mac set RTS threshold %d\n", value); + + wcn36xx_smd_update_cfg(wcn, WCN36XX_HAL_CFG_RTS_THRESHOLD, value); + return 0; +} + +static void wcn36xx_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct wcn36xx *wcn = hw->priv; + struct wcn36xx_vif *vif_priv = (struct wcn36xx_vif *)vif->drv_priv; + wcn36xx_dbg(WCN36XX_DBG_MAC, "mac remove interface vif %p\n", vif); + + list_del(&vif_priv->list); + wcn36xx_smd_delete_sta_self(wcn, vif->addr); +} + +static int wcn36xx_add_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct wcn36xx *wcn = hw->priv; + struct wcn36xx_vif *vif_priv = (struct wcn36xx_vif *)vif->drv_priv; + + wcn36xx_dbg(WCN36XX_DBG_MAC, "mac add interface vif %p type %d\n", + vif, vif->type); + + if (!(NL80211_IFTYPE_STATION == vif->type || + NL80211_IFTYPE_AP == vif->type || + NL80211_IFTYPE_ADHOC == vif->type || + NL80211_IFTYPE_MESH_POINT == vif->type)) { + wcn36xx_warn("Unsupported interface type requested: %d\n", + vif->type); + return -EOPNOTSUPP; + } + + list_add(&vif_priv->list, &wcn->vif_list); + wcn36xx_smd_add_sta_self(wcn, vif); + + return 0; +} + +static int wcn36xx_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct wcn36xx *wcn = hw->priv; + struct wcn36xx_vif *vif_priv = (struct wcn36xx_vif *)vif->drv_priv; + struct wcn36xx_sta *sta_priv = (struct wcn36xx_sta *)sta->drv_priv; + wcn36xx_dbg(WCN36XX_DBG_MAC, "mac sta add vif %p sta %pM\n", + vif, sta->addr); + + vif_priv->sta = sta_priv; + sta_priv->vif = vif_priv; + /* + * For STA mode HW will be configured on BSS_CHANGED_ASSOC because + * at this stage AID is not available yet. + */ + if (NL80211_IFTYPE_STATION != vif->type) { + wcn36xx_update_allowed_rates(sta, WCN36XX_BAND(wcn)); + sta_priv->aid = sta->aid; + wcn36xx_smd_config_sta(wcn, vif, sta); + } + return 0; +} + +static int wcn36xx_sta_remove(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct wcn36xx *wcn = hw->priv; + struct wcn36xx_vif *vif_priv = (struct wcn36xx_vif *)vif->drv_priv; + struct wcn36xx_sta *sta_priv = (struct wcn36xx_sta *)sta->drv_priv; + + wcn36xx_dbg(WCN36XX_DBG_MAC, "mac sta remove vif %p sta %pM index %d\n", + vif, sta->addr, sta_priv->sta_index); + + wcn36xx_smd_delete_sta(wcn, sta_priv->sta_index); + vif_priv->sta = NULL; + sta_priv->vif = NULL; + return 0; +} + +#ifdef CONFIG_PM + +static int wcn36xx_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wow) +{ + struct wcn36xx *wcn = hw->priv; + + wcn36xx_dbg(WCN36XX_DBG_MAC, "mac suspend\n"); + + flush_workqueue(wcn->hal_ind_wq); + wcn36xx_smd_set_power_params(wcn, true); + return 0; +} + +static int wcn36xx_resume(struct ieee80211_hw *hw) +{ + struct wcn36xx *wcn = hw->priv; + + wcn36xx_dbg(WCN36XX_DBG_MAC, "mac resume\n"); + + flush_workqueue(wcn->hal_ind_wq); + wcn36xx_smd_set_power_params(wcn, false); + return 0; +} + +#endif + +static int wcn36xx_ampdu_action(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + enum ieee80211_ampdu_mlme_action action, + struct ieee80211_sta *sta, u16 tid, u16 *ssn, + u8 buf_size) +{ + struct wcn36xx *wcn = hw->priv; + struct wcn36xx_sta *sta_priv = NULL; + + wcn36xx_dbg(WCN36XX_DBG_MAC, "mac ampdu action action %d tid %d\n", + action, tid); + + sta_priv = (struct wcn36xx_sta *)sta->drv_priv; + + switch (action) { + case IEEE80211_AMPDU_RX_START: + sta_priv->tid = tid; + wcn36xx_smd_add_ba_session(wcn, sta, tid, ssn, 0, + get_sta_index(vif, sta_priv)); + wcn36xx_smd_add_ba(wcn); + wcn36xx_smd_trigger_ba(wcn, get_sta_index(vif, sta_priv)); + ieee80211_start_tx_ba_session(sta, tid, 0); + break; + case IEEE80211_AMPDU_RX_STOP: + wcn36xx_smd_del_ba(wcn, tid, get_sta_index(vif, sta_priv)); + break; + case IEEE80211_AMPDU_TX_START: + ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); + break; + case IEEE80211_AMPDU_TX_OPERATIONAL: + wcn36xx_smd_add_ba_session(wcn, sta, tid, ssn, 1, + get_sta_index(vif, sta_priv)); + break; + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: + case IEEE80211_AMPDU_TX_STOP_CONT: + ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); + break; + default: + wcn36xx_err("Unknown AMPDU action\n"); + } + + return 0; +} + +static const struct ieee80211_ops wcn36xx_ops = { + .start = wcn36xx_start, + .stop = wcn36xx_stop, + .add_interface = wcn36xx_add_interface, + .remove_interface = wcn36xx_remove_interface, +#ifdef CONFIG_PM + .suspend = wcn36xx_suspend, + .resume = wcn36xx_resume, +#endif + .config = wcn36xx_config, + .configure_filter = wcn36xx_configure_filter, + .tx = wcn36xx_tx, + .set_key = wcn36xx_set_key, + .sw_scan_start = wcn36xx_sw_scan_start, + .sw_scan_complete = wcn36xx_sw_scan_complete, + .bss_info_changed = wcn36xx_bss_info_changed, + .set_rts_threshold = wcn36xx_set_rts_threshold, + .sta_add = wcn36xx_sta_add, + .sta_remove = wcn36xx_sta_remove, + .ampdu_action = wcn36xx_ampdu_action, +}; + +static int wcn36xx_init_ieee80211(struct wcn36xx *wcn) +{ + int ret = 0; + + static const u32 cipher_suites[] = { + WLAN_CIPHER_SUITE_WEP40, + WLAN_CIPHER_SUITE_WEP104, + WLAN_CIPHER_SUITE_TKIP, + WLAN_CIPHER_SUITE_CCMP, + }; + + wcn->hw->flags = IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_HAS_RATE_CONTROL | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_CONNECTION_MONITOR | + IEEE80211_HW_AMPDU_AGGREGATION | + IEEE80211_HW_TIMING_BEACON_ONLY; + + wcn->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_ADHOC) | + BIT(NL80211_IFTYPE_MESH_POINT); + + wcn->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wcn_band_2ghz; + wcn->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &wcn_band_5ghz; + + wcn->hw->wiphy->cipher_suites = cipher_suites; + wcn->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); + + wcn->hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD; + +#ifdef CONFIG_PM + wcn->hw->wiphy->wowlan = &wowlan_support; +#endif + + wcn->hw->max_listen_interval = 200; + + wcn->hw->queues = 4; + + SET_IEEE80211_DEV(wcn->hw, wcn->dev); + + wcn->hw->sta_data_size = sizeof(struct wcn36xx_sta); + wcn->hw->vif_data_size = sizeof(struct wcn36xx_vif); + + return ret; +} + +static int wcn36xx_platform_get_resources(struct wcn36xx *wcn, + struct platform_device *pdev) +{ + struct resource *res; + /* Set TX IRQ */ + res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, + "wcnss_wlantx_irq"); + if (!res) { + wcn36xx_err("failed to get tx_irq\n"); + return -ENOENT; + } + wcn->tx_irq = res->start; + + /* Set RX IRQ */ + res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, + "wcnss_wlanrx_irq"); + if (!res) { + wcn36xx_err("failed to get rx_irq\n"); + return -ENOENT; + } + wcn->rx_irq = res->start; + + /* Map the memory */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "wcnss_mmio"); + if (!res) { + wcn36xx_err("failed to get mmio\n"); + return -ENOENT; + } + wcn->mmio = ioremap(res->start, resource_size(res)); + if (!wcn->mmio) { + wcn36xx_err("failed to map io memory\n"); + return -ENOMEM; + } + return 0; +} + +static int wcn36xx_probe(struct platform_device *pdev) +{ + struct ieee80211_hw *hw; + struct wcn36xx *wcn; + int ret; + u8 addr[ETH_ALEN]; + + wcn36xx_dbg(WCN36XX_DBG_MAC, "platform probe\n"); + + hw = ieee80211_alloc_hw(sizeof(struct wcn36xx), &wcn36xx_ops); + if (!hw) { + wcn36xx_err("failed to alloc hw\n"); + ret = -ENOMEM; + goto out_err; + } + platform_set_drvdata(pdev, hw); + wcn = hw->priv; + wcn->hw = hw; + wcn->dev = &pdev->dev; + wcn->ctrl_ops = pdev->dev.platform_data; + + mutex_init(&wcn->hal_mutex); + + if (!wcn->ctrl_ops->get_hw_mac(addr)) { + wcn36xx_info("mac address: %pM\n", addr); + SET_IEEE80211_PERM_ADDR(wcn->hw, addr); + } + + ret = wcn36xx_platform_get_resources(wcn, pdev); + if (ret) + goto out_wq; + + wcn36xx_init_ieee80211(wcn); + ret = ieee80211_register_hw(wcn->hw); + if (ret) + goto out_unmap; + + return 0; + +out_unmap: + iounmap(wcn->mmio); +out_wq: + ieee80211_free_hw(hw); +out_err: + return ret; +} +static int wcn36xx_remove(struct platform_device *pdev) +{ + struct ieee80211_hw *hw = platform_get_drvdata(pdev); + struct wcn36xx *wcn = hw->priv; + wcn36xx_dbg(WCN36XX_DBG_MAC, "platform remove\n"); + + mutex_destroy(&wcn->hal_mutex); + + ieee80211_unregister_hw(hw); + iounmap(wcn->mmio); + ieee80211_free_hw(hw); + + return 0; +} +static const struct platform_device_id wcn36xx_platform_id_table[] = { + { + .name = "wcn36xx", + .driver_data = 0 + }, + {} +}; +MODULE_DEVICE_TABLE(platform, wcn36xx_platform_id_table); + +static struct platform_driver wcn36xx_driver = { + .probe = wcn36xx_probe, + .remove = wcn36xx_remove, + .driver = { + .name = "wcn36xx", + .owner = THIS_MODULE, + }, + .id_table = wcn36xx_platform_id_table, +}; + +static int __init wcn36xx_init(void) +{ + platform_driver_register(&wcn36xx_driver); + return 0; +} +module_init(wcn36xx_init); + +static void __exit wcn36xx_exit(void) +{ + platform_driver_unregister(&wcn36xx_driver); +} +module_exit(wcn36xx_exit); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_AUTHOR("Eugene Krasnikov k.eugene.e@gmail.com"); +MODULE_FIRMWARE(WLAN_NV_FILE); diff --git a/drivers/net/wireless/ath/wcn36xx/pmc.c b/drivers/net/wireless/ath/wcn36xx/pmc.c new file mode 100644 index 000000000000..28b515c81b0e --- /dev/null +++ b/drivers/net/wireless/ath/wcn36xx/pmc.c @@ -0,0 +1,62 @@ +/* + * Copyright (c) 2013 Eugene Krasnikov + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "wcn36xx.h" + +int wcn36xx_pmc_enter_bmps_state(struct wcn36xx *wcn, + struct ieee80211_vif *vif) +{ + int ret = 0; + struct wcn36xx_vif *vif_priv = (struct wcn36xx_vif *)vif->drv_priv; + /* TODO: Make sure the TX chain clean */ + ret = wcn36xx_smd_enter_bmps(wcn, vif); + if (!ret) { + wcn36xx_dbg(WCN36XX_DBG_PMC, "Entered BMPS\n"); + vif_priv->pw_state = WCN36XX_BMPS; + } else { + /* + * One of the reasons why HW will not enter BMPS is because + * driver is trying to enter bmps before first beacon was + * received just after auth complete + */ + wcn36xx_err("Can not enter BMPS!\n"); + } + return ret; +} + +int wcn36xx_pmc_exit_bmps_state(struct wcn36xx *wcn, + struct ieee80211_vif *vif) +{ + struct wcn36xx_vif *vif_priv = (struct wcn36xx_vif *)vif->drv_priv; + + if (WCN36XX_BMPS != vif_priv->pw_state) { + wcn36xx_err("Not in BMPS mode, no need to exit from BMPS mode!\n"); + return -EINVAL; + } + wcn36xx_smd_exit_bmps(wcn, vif); + vif_priv->pw_state = WCN36XX_FULL_POWER; + return 0; +} + +int wcn36xx_enable_keep_alive_null_packet(struct wcn36xx *wcn, + struct ieee80211_vif *vif) +{ + wcn36xx_dbg(WCN36XX_DBG_PMC, "%s\n", __func__); + return wcn36xx_smd_keep_alive_req(wcn, vif, + WCN36XX_HAL_KEEP_ALIVE_NULL_PKT); +} diff --git a/drivers/net/wireless/ath/wcn36xx/pmc.h b/drivers/net/wireless/ath/wcn36xx/pmc.h new file mode 100644 index 000000000000..f72ed68b5a07 --- /dev/null +++ b/drivers/net/wireless/ath/wcn36xx/pmc.h @@ -0,0 +1,33 @@ +/* + * Copyright (c) 2013 Eugene Krasnikov + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _WCN36XX_PMC_H_ +#define _WCN36XX_PMC_H_ + +struct wcn36xx; + +enum wcn36xx_power_state { + WCN36XX_FULL_POWER, + WCN36XX_BMPS +}; + +int wcn36xx_pmc_enter_bmps_state(struct wcn36xx *wcn, + struct ieee80211_vif *vif); +int wcn36xx_pmc_exit_bmps_state(struct wcn36xx *wcn, + struct ieee80211_vif *vif); +int wcn36xx_enable_keep_alive_null_packet(struct wcn36xx *wcn, + struct ieee80211_vif *vif); +#endif /* _WCN36XX_PMC_H_ */ diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c new file mode 100644 index 000000000000..f8c3a10510c2 --- /dev/null +++ b/drivers/net/wireless/ath/wcn36xx/smd.c @@ -0,0 +1,2126 @@ +/* + * Copyright (c) 2013 Eugene Krasnikov + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include "smd.h" + +static int put_cfg_tlv_u32(struct wcn36xx *wcn, size_t *len, u32 id, u32 value) +{ + struct wcn36xx_hal_cfg *entry; + u32 *val; + + if (*len + sizeof(*entry) + sizeof(u32) >= WCN36XX_HAL_BUF_SIZE) { + wcn36xx_err("Not enough room for TLV entry\n"); + return -ENOMEM; + } + + entry = (struct wcn36xx_hal_cfg *) (wcn->hal_buf + *len); + entry->id = id; + entry->len = sizeof(u32); + entry->pad_bytes = 0; + entry->reserve = 0; + + val = (u32 *) (entry + 1); + *val = value; + + *len += sizeof(*entry) + sizeof(u32); + + return 0; +} + +static void wcn36xx_smd_set_bss_nw_type(struct wcn36xx *wcn, + struct ieee80211_sta *sta, + struct wcn36xx_hal_config_bss_params *bss_params) +{ + if (IEEE80211_BAND_5GHZ == WCN36XX_BAND(wcn)) + bss_params->nw_type = WCN36XX_HAL_11A_NW_TYPE; + else if (sta && sta->ht_cap.ht_supported) + bss_params->nw_type = WCN36XX_HAL_11N_NW_TYPE; + else if (sta && (sta->supp_rates[IEEE80211_BAND_2GHZ] & 0x7f)) + bss_params->nw_type = WCN36XX_HAL_11G_NW_TYPE; + else + bss_params->nw_type = WCN36XX_HAL_11B_NW_TYPE; +} + +static inline u8 is_cap_supported(unsigned long caps, unsigned long flag) +{ + return caps & flag ? 1 : 0; +} +static void wcn36xx_smd_set_bss_ht_params(struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct wcn36xx_hal_config_bss_params *bss_params) +{ + if (sta && sta->ht_cap.ht_supported) { + unsigned long caps = sta->ht_cap.cap; + bss_params->ht = sta->ht_cap.ht_supported; + bss_params->tx_channel_width_set = is_cap_supported(caps, + IEEE80211_HT_CAP_SUP_WIDTH_20_40); + bss_params->lsig_tx_op_protection_full_support = + is_cap_supported(caps, + IEEE80211_HT_CAP_LSIG_TXOP_PROT); + + bss_params->ht_oper_mode = vif->bss_conf.ht_operation_mode; + bss_params->lln_non_gf_coexist = + !!(vif->bss_conf.ht_operation_mode & + IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); + /* IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT */ + bss_params->dual_cts_protection = 0; + /* IEEE80211_HT_OP_MODE_PROTECTION_20MHZ */ + bss_params->ht20_coexist = 0; + } +} + +static void wcn36xx_smd_set_sta_ht_params(struct ieee80211_sta *sta, + struct wcn36xx_hal_config_sta_params *sta_params) +{ + if (sta->ht_cap.ht_supported) { + unsigned long caps = sta->ht_cap.cap; + sta_params->ht_capable = sta->ht_cap.ht_supported; + sta_params->tx_channel_width_set = is_cap_supported(caps, + IEEE80211_HT_CAP_SUP_WIDTH_20_40); + sta_params->lsig_txop_protection = is_cap_supported(caps, + IEEE80211_HT_CAP_LSIG_TXOP_PROT); + + sta_params->max_ampdu_size = sta->ht_cap.ampdu_factor; + sta_params->max_ampdu_density = sta->ht_cap.ampdu_density; + sta_params->max_amsdu_size = is_cap_supported(caps, + IEEE80211_HT_CAP_MAX_AMSDU); + sta_params->sgi_20Mhz = is_cap_supported(caps, + IEEE80211_HT_CAP_SGI_20); + sta_params->sgi_40mhz = is_cap_supported(caps, + IEEE80211_HT_CAP_SGI_40); + sta_params->green_field_capable = is_cap_supported(caps, + IEEE80211_HT_CAP_GRN_FLD); + sta_params->delayed_ba_support = is_cap_supported(caps, + IEEE80211_HT_CAP_DELAY_BA); + sta_params->dsss_cck_mode_40mhz = is_cap_supported(caps, + IEEE80211_HT_CAP_DSSSCCK40); + } +} + +static void wcn36xx_smd_set_sta_params(struct wcn36xx *wcn, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct wcn36xx_hal_config_sta_params *sta_params) +{ + struct wcn36xx_vif *priv_vif = (struct wcn36xx_vif *)vif->drv_priv; + struct wcn36xx_sta *priv_sta = NULL; + if (vif->type == NL80211_IFTYPE_ADHOC || + vif->type == NL80211_IFTYPE_AP || + vif->type == NL80211_IFTYPE_MESH_POINT) { + sta_params->type = 1; + sta_params->sta_index = 0xFF; + } else { + sta_params->type = 0; + sta_params->sta_index = 1; + } + + sta_params->listen_interval = WCN36XX_LISTEN_INTERVAL(wcn); + + /* + * In STA mode ieee80211_sta contains bssid and ieee80211_vif + * contains our mac address. In AP mode we are bssid so vif + * contains bssid and ieee80211_sta contains mac. + */ + if (NL80211_IFTYPE_STATION == vif->type) + memcpy(&sta_params->mac, vif->addr, ETH_ALEN); + else + memcpy(&sta_params->bssid, vif->addr, ETH_ALEN); + + sta_params->encrypt_type = priv_vif->encrypt_type; + sta_params->short_preamble_supported = + !(WCN36XX_FLAGS(wcn) & + IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE); + + sta_params->rifs_mode = 0; + sta_params->rmf = 0; + sta_params->action = 0; + sta_params->uapsd = 0; + sta_params->mimo_ps = WCN36XX_HAL_HT_MIMO_PS_STATIC; + sta_params->max_ampdu_duration = 0; + sta_params->bssid_index = priv_vif->bss_index; + sta_params->p2p = 0; + + if (sta) { + priv_sta = (struct wcn36xx_sta *)sta->drv_priv; + if (NL80211_IFTYPE_STATION == vif->type) + memcpy(&sta_params->bssid, sta->addr, ETH_ALEN); + else + memcpy(&sta_params->mac, sta->addr, ETH_ALEN); + sta_params->wmm_enabled = sta->wme; + sta_params->max_sp_len = sta->max_sp; + sta_params->aid = priv_sta->aid; + wcn36xx_smd_set_sta_ht_params(sta, sta_params); + memcpy(&sta_params->supported_rates, &priv_sta->supported_rates, + sizeof(priv_sta->supported_rates)); + } else { + wcn36xx_set_default_rates(&sta_params->supported_rates); + } +} + +static int wcn36xx_smd_send_and_wait(struct wcn36xx *wcn, size_t len) +{ + int ret = 0; + wcn36xx_dbg_dump(WCN36XX_DBG_SMD_DUMP, "HAL >>> ", wcn->hal_buf, len); + + init_completion(&wcn->hal_rsp_compl); + ret = wcn->ctrl_ops->tx(wcn->hal_buf, len); + if (ret) { + wcn36xx_err("HAL TX failed\n"); + goto out; + } + if (wait_for_completion_timeout(&wcn->hal_rsp_compl, + msecs_to_jiffies(HAL_MSG_TIMEOUT)) <= 0) { + wcn36xx_err("Timeout while waiting SMD response\n"); + ret = -ETIME; + goto out; + } +out: + return ret; +} + +#define INIT_HAL_MSG(msg_body, type) \ + do { \ + memset(&msg_body, 0, sizeof(msg_body)); \ + msg_body.header.msg_type = type; \ + msg_body.header.msg_version = WCN36XX_HAL_MSG_VERSION0; \ + msg_body.header.len = sizeof(msg_body); \ + } while (0) \ + +#define PREPARE_HAL_BUF(send_buf, msg_body) \ + do { \ + memset(send_buf, 0, msg_body.header.len); \ + memcpy(send_buf, &msg_body, sizeof(msg_body)); \ + } while (0) \ + +static int wcn36xx_smd_rsp_status_check(void *buf, size_t len) +{ + struct wcn36xx_fw_msg_status_rsp *rsp; + + if (len < sizeof(struct wcn36xx_hal_msg_header) + + sizeof(struct wcn36xx_fw_msg_status_rsp)) + return -EIO; + + rsp = (struct wcn36xx_fw_msg_status_rsp *) + (buf + sizeof(struct wcn36xx_hal_msg_header)); + + if (WCN36XX_FW_MSG_RESULT_SUCCESS != rsp->status) + return rsp->status; + + return 0; +} + +int wcn36xx_smd_load_nv(struct wcn36xx *wcn) +{ + const struct firmware *nv; + struct nv_data *nv_d; + struct wcn36xx_hal_nv_img_download_req_msg msg_body; + int fw_bytes_left; + int ret; + u16 fm_offset = 0; + + ret = request_firmware(&nv, WLAN_NV_FILE, wcn->dev); + if (ret) { + wcn36xx_err("Failed to load nv file %s: %d\n", + WLAN_NV_FILE, ret); + goto out_free_nv; + } + + nv_d = (struct nv_data *)nv->data; + INIT_HAL_MSG(msg_body, WCN36XX_HAL_DOWNLOAD_NV_REQ); + + msg_body.header.len += WCN36XX_NV_FRAGMENT_SIZE; + + msg_body.frag_number = 0; + /* hal_buf must be protected with mutex */ + mutex_lock(&wcn->hal_mutex); + + do { + fw_bytes_left = nv->size - fm_offset - 4; + if (fw_bytes_left > WCN36XX_NV_FRAGMENT_SIZE) { + msg_body.last_fragment = 0; + msg_body.nv_img_buffer_size = WCN36XX_NV_FRAGMENT_SIZE; + } else { + msg_body.last_fragment = 1; + msg_body.nv_img_buffer_size = fw_bytes_left; + + /* Do not forget update general message len */ + msg_body.header.len = sizeof(msg_body) + fw_bytes_left; + + } + + /* Add load NV request message header */ + memcpy(wcn->hal_buf, &msg_body, sizeof(msg_body)); + + /* Add NV body itself */ + memcpy(wcn->hal_buf + sizeof(msg_body), + &nv_d->table + fm_offset, + msg_body.nv_img_buffer_size); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) + goto out_unlock; + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, + wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_load_nv response failed err=%d\n", + ret); + goto out_unlock; + } + msg_body.frag_number++; + fm_offset += WCN36XX_NV_FRAGMENT_SIZE; + + } while (msg_body.last_fragment != 1); + +out_unlock: + mutex_unlock(&wcn->hal_mutex); +out_free_nv: + release_firmware(nv); + + return ret; +} + +static int wcn36xx_smd_start_rsp(struct wcn36xx *wcn, void *buf, size_t len) +{ + struct wcn36xx_hal_mac_start_rsp_msg *rsp; + + if (len < sizeof(*rsp)) + return -EIO; + + rsp = (struct wcn36xx_hal_mac_start_rsp_msg *)buf; + + if (WCN36XX_FW_MSG_RESULT_SUCCESS != rsp->start_rsp_params.status) + return -EIO; + + memcpy(wcn->crm_version, rsp->start_rsp_params.crm_version, + WCN36XX_HAL_VERSION_LENGTH); + memcpy(wcn->wlan_version, rsp->start_rsp_params.wlan_version, + WCN36XX_HAL_VERSION_LENGTH); + + /* null terminate the strings, just in case */ + wcn->crm_version[WCN36XX_HAL_VERSION_LENGTH] = '\0'; + wcn->wlan_version[WCN36XX_HAL_VERSION_LENGTH] = '\0'; + + wcn->fw_revision = rsp->start_rsp_params.version.revision; + wcn->fw_version = rsp->start_rsp_params.version.version; + wcn->fw_minor = rsp->start_rsp_params.version.minor; + wcn->fw_major = rsp->start_rsp_params.version.major; + + wcn36xx_info("firmware WLAN version '%s' and CRM version '%s'\n", + wcn->wlan_version, wcn->crm_version); + + wcn36xx_info("firmware API %u.%u.%u.%u, %u stations, %u bssids\n", + wcn->fw_major, wcn->fw_minor, + wcn->fw_version, wcn->fw_revision, + rsp->start_rsp_params.stations, + rsp->start_rsp_params.bssids); + + return 0; +} + +int wcn36xx_smd_start(struct wcn36xx *wcn) +{ + struct wcn36xx_hal_mac_start_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_START_REQ); + + msg_body.params.type = DRIVER_TYPE_PRODUCTION; + msg_body.params.len = 0; + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + wcn36xx_dbg(WCN36XX_DBG_HAL, "hal start type %d\n", + msg_body.params.type); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_start failed\n"); + goto out; + } + + ret = wcn36xx_smd_start_rsp(wcn, wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_start response failed err=%d\n", ret); + goto out; + } + +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_stop(struct wcn36xx *wcn) +{ + struct wcn36xx_hal_mac_stop_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_STOP_REQ); + + msg_body.stop_req_params.reason = HAL_STOP_TYPE_RF_KILL; + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_stop failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_stop response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_init_scan(struct wcn36xx *wcn, enum wcn36xx_hal_sys_mode mode) +{ + struct wcn36xx_hal_init_scan_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_INIT_SCAN_REQ); + + msg_body.mode = mode; + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + wcn36xx_dbg(WCN36XX_DBG_HAL, "hal init scan mode %d\n", msg_body.mode); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_init_scan failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_init_scan response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_start_scan(struct wcn36xx *wcn) +{ + struct wcn36xx_hal_start_scan_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_START_SCAN_REQ); + + msg_body.scan_channel = WCN36XX_HW_CHANNEL(wcn); + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + wcn36xx_dbg(WCN36XX_DBG_HAL, "hal start scan channel %d\n", + msg_body.scan_channel); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_start_scan failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_start_scan response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_end_scan(struct wcn36xx *wcn) +{ + struct wcn36xx_hal_end_scan_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_END_SCAN_REQ); + + msg_body.scan_channel = WCN36XX_HW_CHANNEL(wcn); + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + wcn36xx_dbg(WCN36XX_DBG_HAL, "hal end scan channel %d\n", + msg_body.scan_channel); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_end_scan failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_end_scan response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_finish_scan(struct wcn36xx *wcn, + enum wcn36xx_hal_sys_mode mode) +{ + struct wcn36xx_hal_finish_scan_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_FINISH_SCAN_REQ); + + msg_body.mode = mode; + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + wcn36xx_dbg(WCN36XX_DBG_HAL, "hal finish scan mode %d\n", + msg_body.mode); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_finish_scan failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_finish_scan response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +static int wcn36xx_smd_switch_channel_rsp(void *buf, size_t len) +{ + struct wcn36xx_hal_switch_channel_rsp_msg *rsp; + int ret = 0; + + ret = wcn36xx_smd_rsp_status_check(buf, len); + if (ret) + return ret; + rsp = (struct wcn36xx_hal_switch_channel_rsp_msg *)buf; + wcn36xx_dbg(WCN36XX_DBG_HAL, "channel switched to: %d, status: %d\n", + rsp->channel_number, rsp->status); + return ret; +} + +int wcn36xx_smd_switch_channel(struct wcn36xx *wcn, + struct ieee80211_vif *vif, int ch) +{ + struct wcn36xx_hal_switch_channel_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_CH_SWITCH_REQ); + + msg_body.channel_number = (u8)ch; + msg_body.tx_mgmt_power = 0xbf; + msg_body.max_tx_power = 0xbf; + memcpy(msg_body.self_sta_mac_addr, vif->addr, ETH_ALEN); + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_switch_channel failed\n"); + goto out; + } + ret = wcn36xx_smd_switch_channel_rsp(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_switch_channel response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +static int wcn36xx_smd_update_scan_params_rsp(void *buf, size_t len) +{ + struct wcn36xx_hal_update_scan_params_resp *rsp; + + rsp = (struct wcn36xx_hal_update_scan_params_resp *)buf; + + /* Remove the PNO version bit */ + rsp->status &= (~(WCN36XX_FW_MSG_PNO_VERSION_MASK)); + + if (WCN36XX_FW_MSG_RESULT_SUCCESS != rsp->status) { + wcn36xx_warn("error response from update scan\n"); + return rsp->status; + } + + return 0; +} + +int wcn36xx_smd_update_scan_params(struct wcn36xx *wcn) +{ + struct wcn36xx_hal_update_scan_params_req msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_UPDATE_SCAN_PARAM_REQ); + + msg_body.dot11d_enabled = 0; + msg_body.dot11d_resolved = 0; + msg_body.channel_count = 26; + msg_body.active_min_ch_time = 60; + msg_body.active_max_ch_time = 120; + msg_body.passive_min_ch_time = 60; + msg_body.passive_max_ch_time = 110; + msg_body.state = 0; + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + wcn36xx_dbg(WCN36XX_DBG_HAL, + "hal update scan params channel_count %d\n", + msg_body.channel_count); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_update_scan_params failed\n"); + goto out; + } + ret = wcn36xx_smd_update_scan_params_rsp(wcn->hal_buf, + wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_update_scan_params response failed err=%d\n", + ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +static int wcn36xx_smd_add_sta_self_rsp(struct wcn36xx *wcn, + struct ieee80211_vif *vif, + void *buf, + size_t len) +{ + struct wcn36xx_hal_add_sta_self_rsp_msg *rsp; + struct wcn36xx_vif *priv_vif = (struct wcn36xx_vif *)vif->drv_priv; + + if (len < sizeof(*rsp)) + return -EINVAL; + + rsp = (struct wcn36xx_hal_add_sta_self_rsp_msg *)buf; + + if (rsp->status != WCN36XX_FW_MSG_RESULT_SUCCESS) { + wcn36xx_warn("hal add sta self failure: %d\n", + rsp->status); + return rsp->status; + } + + wcn36xx_dbg(WCN36XX_DBG_HAL, + "hal add sta self status %d self_sta_index %d dpu_index %d\n", + rsp->status, rsp->self_sta_index, rsp->dpu_index); + + priv_vif->self_sta_index = rsp->self_sta_index; + priv_vif->self_dpu_desc_index = rsp->dpu_index; + + return 0; +} + +int wcn36xx_smd_add_sta_self(struct wcn36xx *wcn, struct ieee80211_vif *vif) +{ + struct wcn36xx_hal_add_sta_self_req msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_ADD_STA_SELF_REQ); + + memcpy(&msg_body.self_addr, vif->addr, ETH_ALEN); + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + wcn36xx_dbg(WCN36XX_DBG_HAL, + "hal add sta self self_addr %pM status %d\n", + msg_body.self_addr, msg_body.status); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_add_sta_self failed\n"); + goto out; + } + ret = wcn36xx_smd_add_sta_self_rsp(wcn, + vif, + wcn->hal_buf, + wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_add_sta_self response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_delete_sta_self(struct wcn36xx *wcn, u8 *addr) +{ + struct wcn36xx_hal_del_sta_self_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_DEL_STA_SELF_REQ); + + memcpy(&msg_body.self_addr, addr, ETH_ALEN); + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_delete_sta_self failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_delete_sta_self response failed err=%d\n", + ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_delete_sta(struct wcn36xx *wcn, u8 sta_index) +{ + struct wcn36xx_hal_delete_sta_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_DELETE_STA_REQ); + + msg_body.sta_index = sta_index; + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + wcn36xx_dbg(WCN36XX_DBG_HAL, + "hal delete sta sta_index %d\n", + msg_body.sta_index); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_delete_sta failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_delete_sta response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +static int wcn36xx_smd_join_rsp(void *buf, size_t len) +{ + struct wcn36xx_hal_join_rsp_msg *rsp; + + if (wcn36xx_smd_rsp_status_check(buf, len)) + return -EIO; + + rsp = (struct wcn36xx_hal_join_rsp_msg *)buf; + + wcn36xx_dbg(WCN36XX_DBG_HAL, + "hal rsp join status %d tx_mgmt_power %d\n", + rsp->status, rsp->tx_mgmt_power); + + return 0; +} + +int wcn36xx_smd_join(struct wcn36xx *wcn, const u8 *bssid, u8 *vif, u8 ch) +{ + struct wcn36xx_hal_join_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_JOIN_REQ); + + memcpy(&msg_body.bssid, bssid, ETH_ALEN); + memcpy(&msg_body.self_sta_mac_addr, vif, ETH_ALEN); + msg_body.channel = ch; + + if (conf_is_ht40_minus(&wcn->hw->conf)) + msg_body.secondary_channel_offset = + PHY_DOUBLE_CHANNEL_HIGH_PRIMARY; + else if (conf_is_ht40_plus(&wcn->hw->conf)) + msg_body.secondary_channel_offset = + PHY_DOUBLE_CHANNEL_LOW_PRIMARY; + else + msg_body.secondary_channel_offset = + PHY_SINGLE_CHANNEL_CENTERED; + + msg_body.link_state = WCN36XX_HAL_LINK_PREASSOC_STATE; + + msg_body.max_tx_power = 0xbf; + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + wcn36xx_dbg(WCN36XX_DBG_HAL, + "hal join req bssid %pM self_sta_mac_addr %pM channel %d link_state %d\n", + msg_body.bssid, msg_body.self_sta_mac_addr, + msg_body.channel, msg_body.link_state); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_join failed\n"); + goto out; + } + ret = wcn36xx_smd_join_rsp(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_join response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_set_link_st(struct wcn36xx *wcn, const u8 *bssid, + const u8 *sta_mac, + enum wcn36xx_hal_link_state state) +{ + struct wcn36xx_hal_set_link_state_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_SET_LINK_ST_REQ); + + memcpy(&msg_body.bssid, bssid, ETH_ALEN); + memcpy(&msg_body.self_mac_addr, sta_mac, ETH_ALEN); + msg_body.state = state; + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + wcn36xx_dbg(WCN36XX_DBG_HAL, + "hal set link state bssid %pM self_mac_addr %pM state %d\n", + msg_body.bssid, msg_body.self_mac_addr, msg_body.state); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_set_link_st failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_set_link_st response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +static void wcn36xx_smd_convert_sta_to_v1(struct wcn36xx *wcn, + const struct wcn36xx_hal_config_sta_params *orig, + struct wcn36xx_hal_config_sta_params_v1 *v1) +{ + /* convert orig to v1 format */ + memcpy(&v1->bssid, orig->bssid, ETH_ALEN); + memcpy(&v1->mac, orig->mac, ETH_ALEN); + v1->aid = orig->aid; + v1->type = orig->type; + v1->listen_interval = orig->listen_interval; + v1->ht_capable = orig->ht_capable; + + v1->max_ampdu_size = orig->max_ampdu_size; + v1->max_ampdu_density = orig->max_ampdu_density; + v1->sgi_40mhz = orig->sgi_40mhz; + v1->sgi_20Mhz = orig->sgi_20Mhz; + + memcpy(&v1->supported_rates, &orig->supported_rates, + sizeof(orig->supported_rates)); + v1->sta_index = orig->sta_index; +} + +static int wcn36xx_smd_config_sta_rsp(struct wcn36xx *wcn, + struct ieee80211_sta *sta, + void *buf, + size_t len) +{ + struct wcn36xx_hal_config_sta_rsp_msg *rsp; + struct config_sta_rsp_params *params; + struct wcn36xx_sta *sta_priv = (struct wcn36xx_sta *)sta->drv_priv; + + if (len < sizeof(*rsp)) + return -EINVAL; + + rsp = (struct wcn36xx_hal_config_sta_rsp_msg *)buf; + params = &rsp->params; + + if (params->status != WCN36XX_FW_MSG_RESULT_SUCCESS) { + wcn36xx_warn("hal config sta response failure: %d\n", + params->status); + return -EIO; + } + + sta_priv->sta_index = params->sta_index; + sta_priv->dpu_desc_index = params->dpu_index; + + wcn36xx_dbg(WCN36XX_DBG_HAL, + "hal config sta rsp status %d sta_index %d bssid_index %d p2p %d\n", + params->status, params->sta_index, params->bssid_index, + params->p2p); + + return 0; +} + +static int wcn36xx_smd_config_sta_v1(struct wcn36xx *wcn, + const struct wcn36xx_hal_config_sta_req_msg *orig) +{ + struct wcn36xx_hal_config_sta_req_msg_v1 msg_body; + struct wcn36xx_hal_config_sta_params_v1 *sta = &msg_body.sta_params; + + INIT_HAL_MSG(msg_body, WCN36XX_HAL_CONFIG_STA_REQ); + + wcn36xx_smd_convert_sta_to_v1(wcn, &orig->sta_params, + &msg_body.sta_params); + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + wcn36xx_dbg(WCN36XX_DBG_HAL, + "hal config sta v1 action %d sta_index %d bssid_index %d bssid %pM type %d mac %pM aid %d\n", + sta->action, sta->sta_index, sta->bssid_index, + sta->bssid, sta->type, sta->mac, sta->aid); + + return wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); +} + +int wcn36xx_smd_config_sta(struct wcn36xx *wcn, struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct wcn36xx_hal_config_sta_req_msg msg; + struct wcn36xx_hal_config_sta_params *sta_params; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg, WCN36XX_HAL_CONFIG_STA_REQ); + + sta_params = &msg.sta_params; + + wcn36xx_smd_set_sta_params(wcn, vif, sta, sta_params); + + if (!wcn36xx_is_fw_version(wcn, 1, 2, 2, 24)) { + ret = wcn36xx_smd_config_sta_v1(wcn, &msg); + } else { + PREPARE_HAL_BUF(wcn->hal_buf, msg); + + wcn36xx_dbg(WCN36XX_DBG_HAL, + "hal config sta action %d sta_index %d bssid_index %d bssid %pM type %d mac %pM aid %d\n", + sta_params->action, sta_params->sta_index, + sta_params->bssid_index, sta_params->bssid, + sta_params->type, sta_params->mac, sta_params->aid); + + ret = wcn36xx_smd_send_and_wait(wcn, msg.header.len); + } + if (ret) { + wcn36xx_err("Sending hal_config_sta failed\n"); + goto out; + } + ret = wcn36xx_smd_config_sta_rsp(wcn, + sta, + wcn->hal_buf, + wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_config_sta response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +static int wcn36xx_smd_config_bss_v1(struct wcn36xx *wcn, + const struct wcn36xx_hal_config_bss_req_msg *orig) +{ + struct wcn36xx_hal_config_bss_req_msg_v1 msg_body; + struct wcn36xx_hal_config_bss_params_v1 *bss = &msg_body.bss_params; + struct wcn36xx_hal_config_sta_params_v1 *sta = &bss->sta; + + INIT_HAL_MSG(msg_body, WCN36XX_HAL_CONFIG_BSS_REQ); + + /* convert orig to v1 */ + memcpy(&msg_body.bss_params.bssid, + &orig->bss_params.bssid, ETH_ALEN); + memcpy(&msg_body.bss_params.self_mac_addr, + &orig->bss_params.self_mac_addr, ETH_ALEN); + + msg_body.bss_params.bss_type = orig->bss_params.bss_type; + msg_body.bss_params.oper_mode = orig->bss_params.oper_mode; + msg_body.bss_params.nw_type = orig->bss_params.nw_type; + + msg_body.bss_params.short_slot_time_supported = + orig->bss_params.short_slot_time_supported; + msg_body.bss_params.lla_coexist = orig->bss_params.lla_coexist; + msg_body.bss_params.llb_coexist = orig->bss_params.llb_coexist; + msg_body.bss_params.llg_coexist = orig->bss_params.llg_coexist; + msg_body.bss_params.ht20_coexist = orig->bss_params.ht20_coexist; + msg_body.bss_params.lln_non_gf_coexist = + orig->bss_params.lln_non_gf_coexist; + + msg_body.bss_params.lsig_tx_op_protection_full_support = + orig->bss_params.lsig_tx_op_protection_full_support; + msg_body.bss_params.rifs_mode = orig->bss_params.rifs_mode; + msg_body.bss_params.beacon_interval = orig->bss_params.beacon_interval; + msg_body.bss_params.dtim_period = orig->bss_params.dtim_period; + msg_body.bss_params.tx_channel_width_set = + orig->bss_params.tx_channel_width_set; + msg_body.bss_params.oper_channel = orig->bss_params.oper_channel; + msg_body.bss_params.ext_channel = orig->bss_params.ext_channel; + + msg_body.bss_params.reserved = orig->bss_params.reserved; + + memcpy(&msg_body.bss_params.ssid, + &orig->bss_params.ssid, + sizeof(orig->bss_params.ssid)); + + msg_body.bss_params.action = orig->bss_params.action; + msg_body.bss_params.rateset = orig->bss_params.rateset; + msg_body.bss_params.ht = orig->bss_params.ht; + msg_body.bss_params.obss_prot_enabled = + orig->bss_params.obss_prot_enabled; + msg_body.bss_params.rmf = orig->bss_params.rmf; + msg_body.bss_params.ht_oper_mode = orig->bss_params.ht_oper_mode; + msg_body.bss_params.dual_cts_protection = + orig->bss_params.dual_cts_protection; + + msg_body.bss_params.max_probe_resp_retry_limit = + orig->bss_params.max_probe_resp_retry_limit; + msg_body.bss_params.hidden_ssid = orig->bss_params.hidden_ssid; + msg_body.bss_params.proxy_probe_resp = + orig->bss_params.proxy_probe_resp; + msg_body.bss_params.edca_params_valid = + orig->bss_params.edca_params_valid; + + memcpy(&msg_body.bss_params.acbe, + &orig->bss_params.acbe, + sizeof(orig->bss_params.acbe)); + memcpy(&msg_body.bss_params.acbk, + &orig->bss_params.acbk, + sizeof(orig->bss_params.acbk)); + memcpy(&msg_body.bss_params.acvi, + &orig->bss_params.acvi, + sizeof(orig->bss_params.acvi)); + memcpy(&msg_body.bss_params.acvo, + &orig->bss_params.acvo, + sizeof(orig->bss_params.acvo)); + + msg_body.bss_params.ext_set_sta_key_param_valid = + orig->bss_params.ext_set_sta_key_param_valid; + + memcpy(&msg_body.bss_params.ext_set_sta_key_param, + &orig->bss_params.ext_set_sta_key_param, + sizeof(orig->bss_params.acvo)); + + msg_body.bss_params.wcn36xx_hal_persona = + orig->bss_params.wcn36xx_hal_persona; + msg_body.bss_params.spectrum_mgt_enable = + orig->bss_params.spectrum_mgt_enable; + msg_body.bss_params.tx_mgmt_power = orig->bss_params.tx_mgmt_power; + msg_body.bss_params.max_tx_power = orig->bss_params.max_tx_power; + + wcn36xx_smd_convert_sta_to_v1(wcn, &orig->bss_params.sta, + &msg_body.bss_params.sta); + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + wcn36xx_dbg(WCN36XX_DBG_HAL, + "hal config bss v1 bssid %pM self_mac_addr %pM bss_type %d oper_mode %d nw_type %d\n", + bss->bssid, bss->self_mac_addr, bss->bss_type, + bss->oper_mode, bss->nw_type); + + wcn36xx_dbg(WCN36XX_DBG_HAL, + "- sta bssid %pM action %d sta_index %d bssid_index %d aid %d type %d mac %pM\n", + sta->bssid, sta->action, sta->sta_index, + sta->bssid_index, sta->aid, sta->type, sta->mac); + + return wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); +} + + +static int wcn36xx_smd_config_bss_rsp(struct wcn36xx *wcn, + struct ieee80211_vif *vif, + void *buf, + size_t len) +{ + struct wcn36xx_hal_config_bss_rsp_msg *rsp; + struct wcn36xx_hal_config_bss_rsp_params *params; + struct wcn36xx_vif *priv_vif = (struct wcn36xx_vif *)vif->drv_priv; + + if (len < sizeof(*rsp)) + return -EINVAL; + + rsp = (struct wcn36xx_hal_config_bss_rsp_msg *)buf; + params = &rsp->bss_rsp_params; + + if (params->status != WCN36XX_FW_MSG_RESULT_SUCCESS) { + wcn36xx_warn("hal config bss response failure: %d\n", + params->status); + return -EIO; + } + + wcn36xx_dbg(WCN36XX_DBG_HAL, + "hal config bss rsp status %d bss_idx %d dpu_desc_index %d" + " sta_idx %d self_idx %d bcast_idx %d mac %pM" + " power %d ucast_dpu_signature %d\n", + params->status, params->bss_index, params->dpu_desc_index, + params->bss_sta_index, params->bss_self_sta_index, + params->bss_bcast_sta_idx, params->mac, + params->tx_mgmt_power, params->ucast_dpu_signature); + + priv_vif->bss_index = params->bss_index; + + if (priv_vif->sta) { + priv_vif->sta->bss_sta_index = params->bss_sta_index; + priv_vif->sta->bss_dpu_desc_index = params->dpu_desc_index; + } + + priv_vif->ucast_dpu_signature = params->ucast_dpu_signature; + + return 0; +} + +int wcn36xx_smd_config_bss(struct wcn36xx *wcn, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, const u8 *bssid, + bool update) +{ + struct wcn36xx_hal_config_bss_req_msg msg; + struct wcn36xx_hal_config_bss_params *bss; + struct wcn36xx_hal_config_sta_params *sta_params; + struct wcn36xx_vif *vif_priv = (struct wcn36xx_vif *)vif->drv_priv; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg, WCN36XX_HAL_CONFIG_BSS_REQ); + + bss = &msg.bss_params; + sta_params = &bss->sta; + + WARN_ON(is_zero_ether_addr(bssid)); + + memcpy(&bss->bssid, bssid, ETH_ALEN); + + memcpy(bss->self_mac_addr, vif->addr, ETH_ALEN); + + if (vif->type == NL80211_IFTYPE_STATION) { + bss->bss_type = WCN36XX_HAL_INFRASTRUCTURE_MODE; + + /* STA */ + bss->oper_mode = 1; + bss->wcn36xx_hal_persona = WCN36XX_HAL_STA_MODE; + } else if (vif->type == NL80211_IFTYPE_AP) { + bss->bss_type = WCN36XX_HAL_INFRA_AP_MODE; + + /* AP */ + bss->oper_mode = 0; + bss->wcn36xx_hal_persona = WCN36XX_HAL_STA_SAP_MODE; + } else if (vif->type == NL80211_IFTYPE_ADHOC || + vif->type == NL80211_IFTYPE_MESH_POINT) { + bss->bss_type = WCN36XX_HAL_IBSS_MODE; + + /* STA */ + bss->oper_mode = 1; + } else { + wcn36xx_warn("Unknown type for bss config: %d\n", vif->type); + } + + if (vif->type == NL80211_IFTYPE_STATION) + wcn36xx_smd_set_bss_nw_type(wcn, sta, bss); + else + bss->nw_type = WCN36XX_HAL_11N_NW_TYPE; + + bss->short_slot_time_supported = vif->bss_conf.use_short_slot; + bss->lla_coexist = 0; + bss->llb_coexist = 0; + bss->llg_coexist = 0; + bss->rifs_mode = 0; + bss->beacon_interval = vif->bss_conf.beacon_int; + bss->dtim_period = vif_priv->dtim_period; + + wcn36xx_smd_set_bss_ht_params(vif, sta, bss); + + bss->oper_channel = WCN36XX_HW_CHANNEL(wcn); + + if (conf_is_ht40_minus(&wcn->hw->conf)) + bss->ext_channel = IEEE80211_HT_PARAM_CHA_SEC_BELOW; + else if (conf_is_ht40_plus(&wcn->hw->conf)) + bss->ext_channel = IEEE80211_HT_PARAM_CHA_SEC_ABOVE; + else + bss->ext_channel = IEEE80211_HT_PARAM_CHA_SEC_NONE; + + bss->reserved = 0; + wcn36xx_smd_set_sta_params(wcn, vif, sta, sta_params); + + /* wcn->ssid is only valid in AP and IBSS mode */ + bss->ssid.length = vif_priv->ssid.length; + memcpy(bss->ssid.ssid, vif_priv->ssid.ssid, vif_priv->ssid.length); + + bss->obss_prot_enabled = 0; + bss->rmf = 0; + bss->max_probe_resp_retry_limit = 0; + bss->hidden_ssid = vif->bss_conf.hidden_ssid; + bss->proxy_probe_resp = 0; + bss->edca_params_valid = 0; + + /* FIXME: set acbe, acbk, acvi and acvo */ + + bss->ext_set_sta_key_param_valid = 0; + + /* FIXME: set ext_set_sta_key_param */ + + bss->spectrum_mgt_enable = 0; + bss->tx_mgmt_power = 0; + bss->max_tx_power = WCN36XX_MAX_POWER(wcn); + + bss->action = update; + + wcn36xx_dbg(WCN36XX_DBG_HAL, + "hal config bss bssid %pM self_mac_addr %pM bss_type %d oper_mode %d nw_type %d\n", + bss->bssid, bss->self_mac_addr, bss->bss_type, + bss->oper_mode, bss->nw_type); + + wcn36xx_dbg(WCN36XX_DBG_HAL, + "- sta bssid %pM action %d sta_index %d bssid_index %d aid %d type %d mac %pM\n", + sta_params->bssid, sta_params->action, + sta_params->sta_index, sta_params->bssid_index, + sta_params->aid, sta_params->type, + sta_params->mac); + + if (!wcn36xx_is_fw_version(wcn, 1, 2, 2, 24)) { + ret = wcn36xx_smd_config_bss_v1(wcn, &msg); + } else { + PREPARE_HAL_BUF(wcn->hal_buf, msg); + + ret = wcn36xx_smd_send_and_wait(wcn, msg.header.len); + } + if (ret) { + wcn36xx_err("Sending hal_config_bss failed\n"); + goto out; + } + ret = wcn36xx_smd_config_bss_rsp(wcn, + vif, + wcn->hal_buf, + wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_config_bss response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_delete_bss(struct wcn36xx *wcn, struct ieee80211_vif *vif) +{ + struct wcn36xx_hal_delete_bss_req_msg msg_body; + struct wcn36xx_vif *priv_vif = (struct wcn36xx_vif *)vif->drv_priv; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_DELETE_BSS_REQ); + + msg_body.bss_index = priv_vif->bss_index; + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + wcn36xx_dbg(WCN36XX_DBG_HAL, "hal delete bss %d\n", msg_body.bss_index); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_delete_bss failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_delete_bss response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_send_beacon(struct wcn36xx *wcn, struct ieee80211_vif *vif, + struct sk_buff *skb_beacon, u16 tim_off, + u16 p2p_off) +{ + struct wcn36xx_hal_send_beacon_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_SEND_BEACON_REQ); + + /* TODO need to find out why this is needed? */ + msg_body.beacon_length = skb_beacon->len + 6; + + if (BEACON_TEMPLATE_SIZE > msg_body.beacon_length) { + memcpy(&msg_body.beacon, &skb_beacon->len, sizeof(u32)); + memcpy(&(msg_body.beacon[4]), skb_beacon->data, + skb_beacon->len); + } else { + wcn36xx_err("Beacon is to big: beacon size=%d\n", + msg_body.beacon_length); + return -ENOMEM; + } + memcpy(msg_body.bssid, vif->addr, ETH_ALEN); + + /* TODO need to find out why this is needed? */ + msg_body.tim_ie_offset = tim_off+4; + msg_body.p2p_ie_offset = p2p_off; + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + wcn36xx_dbg(WCN36XX_DBG_HAL, + "hal send beacon beacon_length %d\n", + msg_body.beacon_length); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_send_beacon failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_send_beacon response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_update_proberesp_tmpl(struct wcn36xx *wcn, + struct ieee80211_vif *vif, + struct sk_buff *skb) +{ + struct wcn36xx_hal_send_probe_resp_req_msg msg; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg, WCN36XX_HAL_UPDATE_PROBE_RSP_TEMPLATE_REQ); + + if (skb->len > BEACON_TEMPLATE_SIZE) { + wcn36xx_warn("probe response template is too big: %d\n", + skb->len); + return -E2BIG; + } + + msg.probe_resp_template_len = skb->len; + memcpy(&msg.probe_resp_template, skb->data, skb->len); + + memcpy(msg.bssid, vif->addr, ETH_ALEN); + + PREPARE_HAL_BUF(wcn->hal_buf, msg); + + wcn36xx_dbg(WCN36XX_DBG_HAL, + "hal update probe rsp len %d bssid %pM\n", + msg.probe_resp_template_len, msg.bssid); + + ret = wcn36xx_smd_send_and_wait(wcn, msg.header.len); + if (ret) { + wcn36xx_err("Sending hal_update_proberesp_tmpl failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_update_proberesp_tmpl response failed err=%d\n", + ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_set_stakey(struct wcn36xx *wcn, + enum ani_ed_type enc_type, + u8 keyidx, + u8 keylen, + u8 *key, + u8 sta_index) +{ + struct wcn36xx_hal_set_sta_key_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_SET_STAKEY_REQ); + + msg_body.set_sta_key_params.sta_index = sta_index; + msg_body.set_sta_key_params.enc_type = enc_type; + + msg_body.set_sta_key_params.key[0].id = keyidx; + msg_body.set_sta_key_params.key[0].unicast = 1; + msg_body.set_sta_key_params.key[0].direction = WCN36XX_HAL_TX_RX; + msg_body.set_sta_key_params.key[0].pae_role = 0; + msg_body.set_sta_key_params.key[0].length = keylen; + memcpy(msg_body.set_sta_key_params.key[0].key, key, keylen); + msg_body.set_sta_key_params.single_tid_rc = 1; + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_set_stakey failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_set_stakey response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_set_bsskey(struct wcn36xx *wcn, + enum ani_ed_type enc_type, + u8 keyidx, + u8 keylen, + u8 *key) +{ + struct wcn36xx_hal_set_bss_key_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_SET_BSSKEY_REQ); + msg_body.bss_idx = 0; + msg_body.enc_type = enc_type; + msg_body.num_keys = 1; + msg_body.keys[0].id = keyidx; + msg_body.keys[0].unicast = 0; + msg_body.keys[0].direction = WCN36XX_HAL_RX_ONLY; + msg_body.keys[0].pae_role = 0; + msg_body.keys[0].length = keylen; + memcpy(msg_body.keys[0].key, key, keylen); + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_set_bsskey failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_set_bsskey response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_remove_stakey(struct wcn36xx *wcn, + enum ani_ed_type enc_type, + u8 keyidx, + u8 sta_index) +{ + struct wcn36xx_hal_remove_sta_key_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_RMV_STAKEY_REQ); + + msg_body.sta_idx = sta_index; + msg_body.enc_type = enc_type; + msg_body.key_id = keyidx; + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_remove_stakey failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_remove_stakey response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_remove_bsskey(struct wcn36xx *wcn, + enum ani_ed_type enc_type, + u8 keyidx) +{ + struct wcn36xx_hal_remove_bss_key_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_RMV_BSSKEY_REQ); + msg_body.bss_idx = 0; + msg_body.enc_type = enc_type; + msg_body.key_id = keyidx; + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_remove_bsskey failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_remove_bsskey response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_enter_bmps(struct wcn36xx *wcn, struct ieee80211_vif *vif) +{ + struct wcn36xx_hal_enter_bmps_req_msg msg_body; + struct wcn36xx_vif *vif_priv = (struct wcn36xx_vif *)vif->drv_priv; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_ENTER_BMPS_REQ); + + msg_body.bss_index = vif_priv->bss_index; + msg_body.tbtt = vif->bss_conf.sync_tsf; + msg_body.dtim_period = vif_priv->dtim_period; + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_enter_bmps failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_enter_bmps response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_exit_bmps(struct wcn36xx *wcn, struct ieee80211_vif *vif) +{ + struct wcn36xx_hal_enter_bmps_req_msg msg_body; + struct wcn36xx_vif *vif_priv = (struct wcn36xx_vif *)vif->drv_priv; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_EXIT_BMPS_REQ); + + msg_body.bss_index = vif_priv->bss_index; + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_exit_bmps failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_exit_bmps response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} +int wcn36xx_smd_set_power_params(struct wcn36xx *wcn, bool ignore_dtim) +{ + struct wcn36xx_hal_set_power_params_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_SET_POWER_PARAMS_REQ); + + /* + * When host is down ignore every second dtim + */ + if (ignore_dtim) { + msg_body.ignore_dtim = 1; + msg_body.dtim_period = 2; + } + msg_body.listen_interval = WCN36XX_LISTEN_INTERVAL(wcn); + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_set_power_params failed\n"); + goto out; + } + +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} +/* Notice: This function should be called after associated, or else it + * will be invalid + */ +int wcn36xx_smd_keep_alive_req(struct wcn36xx *wcn, + struct ieee80211_vif *vif, + int packet_type) +{ + struct wcn36xx_hal_keep_alive_req_msg msg_body; + struct wcn36xx_vif *vif_priv = (struct wcn36xx_vif *)vif->drv_priv; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_KEEP_ALIVE_REQ); + + if (packet_type == WCN36XX_HAL_KEEP_ALIVE_NULL_PKT) { + msg_body.bss_index = vif_priv->bss_index; + msg_body.packet_type = WCN36XX_HAL_KEEP_ALIVE_NULL_PKT; + msg_body.time_period = WCN36XX_KEEP_ALIVE_TIME_PERIOD; + } else if (packet_type == WCN36XX_HAL_KEEP_ALIVE_UNSOLICIT_ARP_RSP) { + /* TODO: it also support ARP response type */ + } else { + wcn36xx_warn("unknow keep alive packet type %d\n", packet_type); + return -EINVAL; + } + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_exit_bmps failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_exit_bmps response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_dump_cmd_req(struct wcn36xx *wcn, u32 arg1, u32 arg2, + u32 arg3, u32 arg4, u32 arg5) +{ + struct wcn36xx_hal_dump_cmd_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_DUMP_COMMAND_REQ); + + msg_body.arg1 = arg1; + msg_body.arg2 = arg2; + msg_body.arg3 = arg3; + msg_body.arg4 = arg4; + msg_body.arg5 = arg5; + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_dump_cmd failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_dump_cmd response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +static inline void set_feat_caps(u32 *bitmap, + enum place_holder_in_cap_bitmap cap) +{ + int arr_idx, bit_idx; + + if (cap < 0 || cap > 127) { + wcn36xx_warn("error cap idx %d\n", cap); + return; + } + + arr_idx = cap / 32; + bit_idx = cap % 32; + bitmap[arr_idx] |= (1 << bit_idx); +} + +static inline int get_feat_caps(u32 *bitmap, + enum place_holder_in_cap_bitmap cap) +{ + int arr_idx, bit_idx; + int ret = 0; + + if (cap < 0 || cap > 127) { + wcn36xx_warn("error cap idx %d\n", cap); + return -EINVAL; + } + + arr_idx = cap / 32; + bit_idx = cap % 32; + ret = (bitmap[arr_idx] & (1 << bit_idx)) ? 1 : 0; + return ret; +} + +static inline void clear_feat_caps(u32 *bitmap, + enum place_holder_in_cap_bitmap cap) +{ + int arr_idx, bit_idx; + + if (cap < 0 || cap > 127) { + wcn36xx_warn("error cap idx %d\n", cap); + return; + } + + arr_idx = cap / 32; + bit_idx = cap % 32; + bitmap[arr_idx] &= ~(1 << bit_idx); +} + +int wcn36xx_smd_feature_caps_exchange(struct wcn36xx *wcn) +{ + struct wcn36xx_hal_feat_caps_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_FEATURE_CAPS_EXCHANGE_REQ); + + set_feat_caps(msg_body.feat_caps, STA_POWERSAVE); + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_feature_caps_exchange failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_feature_caps_exchange response failed err=%d\n", + ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_add_ba_session(struct wcn36xx *wcn, + struct ieee80211_sta *sta, + u16 tid, + u16 *ssn, + u8 direction, + u8 sta_index) +{ + struct wcn36xx_hal_add_ba_session_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_ADD_BA_SESSION_REQ); + + msg_body.sta_index = sta_index; + memcpy(&msg_body.mac_addr, sta->addr, ETH_ALEN); + msg_body.dialog_token = 0x10; + msg_body.tid = tid; + + /* Immediate BA because Delayed BA is not supported */ + msg_body.policy = 1; + msg_body.buffer_size = WCN36XX_AGGR_BUFFER_SIZE; + msg_body.timeout = 0; + if (ssn) + msg_body.ssn = *ssn; + msg_body.direction = direction; + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_add_ba_session failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_add_ba_session response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_add_ba(struct wcn36xx *wcn) +{ + struct wcn36xx_hal_add_ba_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_ADD_BA_REQ); + + msg_body.session_id = 0; + msg_body.win_size = WCN36XX_AGGR_BUFFER_SIZE; + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_add_ba failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_add_ba response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_del_ba(struct wcn36xx *wcn, u16 tid, u8 sta_index) +{ + struct wcn36xx_hal_del_ba_req_msg msg_body; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_DEL_BA_REQ); + + msg_body.sta_index = sta_index; + msg_body.tid = tid; + msg_body.direction = 0; + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_del_ba failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_del_ba response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +int wcn36xx_smd_trigger_ba(struct wcn36xx *wcn, u8 sta_index) +{ + struct wcn36xx_hal_trigger_ba_req_msg msg_body; + struct wcn36xx_hal_trigget_ba_req_candidate *candidate; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_TRIGGER_BA_REQ); + + msg_body.session_id = 0; + msg_body.candidate_cnt = 1; + msg_body.header.len += sizeof(*candidate); + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + candidate = (struct wcn36xx_hal_trigget_ba_req_candidate *) + (wcn->hal_buf + sizeof(msg_body)); + candidate->sta_index = sta_index; + candidate->tid_bitmap = 1; + + ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len); + if (ret) { + wcn36xx_err("Sending hal_trigger_ba failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_trigger_ba response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} + +static int wcn36xx_smd_tx_compl_ind(struct wcn36xx *wcn, void *buf, size_t len) +{ + struct wcn36xx_hal_tx_compl_ind_msg *rsp = buf; + + if (len != sizeof(*rsp)) { + wcn36xx_warn("Bad TX complete indication\n"); + return -EIO; + } + + wcn36xx_dxe_tx_ack_ind(wcn, rsp->status); + + return 0; +} + +static int wcn36xx_smd_missed_beacon_ind(struct wcn36xx *wcn, + void *buf, + size_t len) +{ + struct wcn36xx_hal_missed_beacon_ind_msg *rsp = buf; + struct ieee80211_vif *vif = NULL; + struct wcn36xx_vif *tmp; + + /* Old FW does not have bss index */ + if (wcn36xx_is_fw_version(wcn, 1, 2, 2, 24)) { + list_for_each_entry(tmp, &wcn->vif_list, list) { + wcn36xx_dbg(WCN36XX_DBG_HAL, "beacon missed bss_index %d\n", + tmp->bss_index); + vif = container_of((void *)tmp, + struct ieee80211_vif, + drv_priv); + ieee80211_connection_loss(vif); + } + return 0; + } + + if (len != sizeof(*rsp)) { + wcn36xx_warn("Corrupted missed beacon indication\n"); + return -EIO; + } + + list_for_each_entry(tmp, &wcn->vif_list, list) { + if (tmp->bss_index == rsp->bss_index) { + wcn36xx_dbg(WCN36XX_DBG_HAL, "beacon missed bss_index %d\n", + rsp->bss_index); + vif = container_of((void *)tmp, + struct ieee80211_vif, + drv_priv); + ieee80211_connection_loss(vif); + return 0; + } + } + + wcn36xx_warn("BSS index %d not found\n", rsp->bss_index); + return -ENOENT; +} + +static int wcn36xx_smd_delete_sta_context_ind(struct wcn36xx *wcn, + void *buf, + size_t len) +{ + struct wcn36xx_hal_delete_sta_context_ind_msg *rsp = buf; + struct wcn36xx_vif *tmp; + struct ieee80211_sta *sta = NULL; + + if (len != sizeof(*rsp)) { + wcn36xx_warn("Corrupted delete sta indication\n"); + return -EIO; + } + + list_for_each_entry(tmp, &wcn->vif_list, list) { + if (sta && (tmp->sta->sta_index == rsp->sta_id)) { + sta = container_of((void *)tmp->sta, + struct ieee80211_sta, + drv_priv); + wcn36xx_dbg(WCN36XX_DBG_HAL, + "delete station indication %pM index %d\n", + rsp->addr2, + rsp->sta_id); + ieee80211_report_low_ack(sta, 0); + return 0; + } + } + + wcn36xx_warn("STA with addr %pM and index %d not found\n", + rsp->addr2, + rsp->sta_id); + return -ENOENT; +} + +int wcn36xx_smd_update_cfg(struct wcn36xx *wcn, u32 cfg_id, u32 value) +{ + struct wcn36xx_hal_update_cfg_req_msg msg_body, *body; + size_t len; + int ret = 0; + + mutex_lock(&wcn->hal_mutex); + INIT_HAL_MSG(msg_body, WCN36XX_HAL_UPDATE_CFG_REQ); + + PREPARE_HAL_BUF(wcn->hal_buf, msg_body); + + body = (struct wcn36xx_hal_update_cfg_req_msg *) wcn->hal_buf; + len = msg_body.header.len; + + put_cfg_tlv_u32(wcn, &len, cfg_id, value); + body->header.len = len; + body->len = len - sizeof(*body); + + ret = wcn36xx_smd_send_and_wait(wcn, body->header.len); + if (ret) { + wcn36xx_err("Sending hal_update_cfg failed\n"); + goto out; + } + ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len); + if (ret) { + wcn36xx_err("hal_update_cfg response failed err=%d\n", ret); + goto out; + } +out: + mutex_unlock(&wcn->hal_mutex); + return ret; +} +static void wcn36xx_smd_rsp_process(struct wcn36xx *wcn, void *buf, size_t len) +{ + struct wcn36xx_hal_msg_header *msg_header = buf; + struct wcn36xx_hal_ind_msg *msg_ind; + wcn36xx_dbg_dump(WCN36XX_DBG_SMD_DUMP, "SMD <<< ", buf, len); + + switch (msg_header->msg_type) { + case WCN36XX_HAL_START_RSP: + case WCN36XX_HAL_CONFIG_STA_RSP: + case WCN36XX_HAL_CONFIG_BSS_RSP: + case WCN36XX_HAL_ADD_STA_SELF_RSP: + case WCN36XX_HAL_STOP_RSP: + case WCN36XX_HAL_DEL_STA_SELF_RSP: + case WCN36XX_HAL_DELETE_STA_RSP: + case WCN36XX_HAL_INIT_SCAN_RSP: + case WCN36XX_HAL_START_SCAN_RSP: + case WCN36XX_HAL_END_SCAN_RSP: + case WCN36XX_HAL_FINISH_SCAN_RSP: + case WCN36XX_HAL_DOWNLOAD_NV_RSP: + case WCN36XX_HAL_DELETE_BSS_RSP: + case WCN36XX_HAL_SEND_BEACON_RSP: + case WCN36XX_HAL_SET_LINK_ST_RSP: + case WCN36XX_HAL_UPDATE_PROBE_RSP_TEMPLATE_RSP: + case WCN36XX_HAL_SET_BSSKEY_RSP: + case WCN36XX_HAL_SET_STAKEY_RSP: + case WCN36XX_HAL_RMV_STAKEY_RSP: + case WCN36XX_HAL_RMV_BSSKEY_RSP: + case WCN36XX_HAL_ENTER_BMPS_RSP: + case WCN36XX_HAL_SET_POWER_PARAMS_RSP: + case WCN36XX_HAL_EXIT_BMPS_RSP: + case WCN36XX_HAL_KEEP_ALIVE_RSP: + case WCN36XX_HAL_DUMP_COMMAND_RSP: + case WCN36XX_HAL_ADD_BA_SESSION_RSP: + case WCN36XX_HAL_ADD_BA_RSP: + case WCN36XX_HAL_DEL_BA_RSP: + case WCN36XX_HAL_TRIGGER_BA_RSP: + case WCN36XX_HAL_UPDATE_CFG_RSP: + case WCN36XX_HAL_JOIN_RSP: + case WCN36XX_HAL_UPDATE_SCAN_PARAM_RSP: + case WCN36XX_HAL_CH_SWITCH_RSP: + case WCN36XX_HAL_FEATURE_CAPS_EXCHANGE_RSP: + memcpy(wcn->hal_buf, buf, len); + wcn->hal_rsp_len = len; + complete(&wcn->hal_rsp_compl); + break; + + case WCN36XX_HAL_OTA_TX_COMPL_IND: + case WCN36XX_HAL_MISSED_BEACON_IND: + case WCN36XX_HAL_DELETE_STA_CONTEXT_IND: + mutex_lock(&wcn->hal_ind_mutex); + msg_ind = kmalloc(sizeof(*msg_ind), GFP_KERNEL); + msg_ind->msg_len = len; + msg_ind->msg = kmalloc(len, GFP_KERNEL); + memcpy(msg_ind->msg, buf, len); + list_add_tail(&msg_ind->list, &wcn->hal_ind_queue); + queue_work(wcn->hal_ind_wq, &wcn->hal_ind_work); + wcn36xx_dbg(WCN36XX_DBG_HAL, "indication arrived\n"); + mutex_unlock(&wcn->hal_ind_mutex); + break; + default: + wcn36xx_err("SMD_EVENT (%d) not supported\n", + msg_header->msg_type); + } +} +static void wcn36xx_ind_smd_work(struct work_struct *work) +{ + struct wcn36xx *wcn = + container_of(work, struct wcn36xx, hal_ind_work); + struct wcn36xx_hal_msg_header *msg_header; + struct wcn36xx_hal_ind_msg *hal_ind_msg; + + mutex_lock(&wcn->hal_ind_mutex); + + hal_ind_msg = list_first_entry(&wcn->hal_ind_queue, + struct wcn36xx_hal_ind_msg, + list); + + msg_header = (struct wcn36xx_hal_msg_header *)hal_ind_msg->msg; + + switch (msg_header->msg_type) { + case WCN36XX_HAL_OTA_TX_COMPL_IND: + wcn36xx_smd_tx_compl_ind(wcn, + hal_ind_msg->msg, + hal_ind_msg->msg_len); + break; + case WCN36XX_HAL_MISSED_BEACON_IND: + wcn36xx_smd_missed_beacon_ind(wcn, + hal_ind_msg->msg, + hal_ind_msg->msg_len); + break; + case WCN36XX_HAL_DELETE_STA_CONTEXT_IND: + wcn36xx_smd_delete_sta_context_ind(wcn, + hal_ind_msg->msg, + hal_ind_msg->msg_len); + break; + default: + wcn36xx_err("SMD_EVENT (%d) not supported\n", + msg_header->msg_type); + } + list_del(wcn->hal_ind_queue.next); + kfree(hal_ind_msg->msg); + kfree(hal_ind_msg); + mutex_unlock(&wcn->hal_ind_mutex); +} +int wcn36xx_smd_open(struct wcn36xx *wcn) +{ + int ret = 0; + wcn->hal_ind_wq = create_freezable_workqueue("wcn36xx_smd_ind"); + if (!wcn->hal_ind_wq) { + wcn36xx_err("failed to allocate wq\n"); + ret = -ENOMEM; + goto out; + } + INIT_WORK(&wcn->hal_ind_work, wcn36xx_ind_smd_work); + INIT_LIST_HEAD(&wcn->hal_ind_queue); + mutex_init(&wcn->hal_ind_mutex); + + ret = wcn->ctrl_ops->open(wcn, wcn36xx_smd_rsp_process); + if (ret) { + wcn36xx_err("failed to open control channel\n"); + goto free_wq; + } + + return ret; + +free_wq: + destroy_workqueue(wcn->hal_ind_wq); +out: + return ret; +} + +void wcn36xx_smd_close(struct wcn36xx *wcn) +{ + wcn->ctrl_ops->close(); + destroy_workqueue(wcn->hal_ind_wq); + mutex_destroy(&wcn->hal_ind_mutex); +} diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h new file mode 100644 index 000000000000..e7c39019c6f1 --- /dev/null +++ b/drivers/net/wireless/ath/wcn36xx/smd.h @@ -0,0 +1,127 @@ +/* + * Copyright (c) 2013 Eugene Krasnikov + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _SMD_H_ +#define _SMD_H_ + +#include "wcn36xx.h" + +/* Max shared size is 4k but we take less.*/ +#define WCN36XX_NV_FRAGMENT_SIZE 3072 + +#define WCN36XX_HAL_BUF_SIZE 4096 + +#define HAL_MSG_TIMEOUT 200 +#define WCN36XX_SMSM_WLAN_TX_ENABLE 0x00000400 +#define WCN36XX_SMSM_WLAN_TX_RINGS_EMPTY 0x00000200 +/* The PNO version info be contained in the rsp msg */ +#define WCN36XX_FW_MSG_PNO_VERSION_MASK 0x8000 + +enum wcn36xx_fw_msg_result { + WCN36XX_FW_MSG_RESULT_SUCCESS = 0, + WCN36XX_FW_MSG_RESULT_SUCCESS_SYNC = 1, + + WCN36XX_FW_MSG_RESULT_MEM_FAIL = 5, +}; + +/******************************/ +/* SMD requests and responses */ +/******************************/ +struct wcn36xx_fw_msg_status_rsp { + u32 status; +} __packed; + +struct wcn36xx_hal_ind_msg { + struct list_head list; + u8 *msg; + size_t msg_len; +}; + +struct wcn36xx; + +int wcn36xx_smd_open(struct wcn36xx *wcn); +void wcn36xx_smd_close(struct wcn36xx *wcn); + +int wcn36xx_smd_load_nv(struct wcn36xx *wcn); +int wcn36xx_smd_start(struct wcn36xx *wcn); +int wcn36xx_smd_stop(struct wcn36xx *wcn); +int wcn36xx_smd_init_scan(struct wcn36xx *wcn, enum wcn36xx_hal_sys_mode mode); +int wcn36xx_smd_start_scan(struct wcn36xx *wcn); +int wcn36xx_smd_end_scan(struct wcn36xx *wcn); +int wcn36xx_smd_finish_scan(struct wcn36xx *wcn, + enum wcn36xx_hal_sys_mode mode); +int wcn36xx_smd_update_scan_params(struct wcn36xx *wcn); +int wcn36xx_smd_add_sta_self(struct wcn36xx *wcn, struct ieee80211_vif *vif); +int wcn36xx_smd_delete_sta_self(struct wcn36xx *wcn, u8 *addr); +int wcn36xx_smd_delete_sta(struct wcn36xx *wcn, u8 sta_index); +int wcn36xx_smd_join(struct wcn36xx *wcn, const u8 *bssid, u8 *vif, u8 ch); +int wcn36xx_smd_set_link_st(struct wcn36xx *wcn, const u8 *bssid, + const u8 *sta_mac, + enum wcn36xx_hal_link_state state); +int wcn36xx_smd_config_bss(struct wcn36xx *wcn, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, const u8 *bssid, + bool update); +int wcn36xx_smd_delete_bss(struct wcn36xx *wcn, struct ieee80211_vif *vif); +int wcn36xx_smd_config_sta(struct wcn36xx *wcn, struct ieee80211_vif *vif, + struct ieee80211_sta *sta); +int wcn36xx_smd_send_beacon(struct wcn36xx *wcn, struct ieee80211_vif *vif, + struct sk_buff *skb_beacon, u16 tim_off, + u16 p2p_off); +int wcn36xx_smd_switch_channel(struct wcn36xx *wcn, + struct ieee80211_vif *vif, int ch); +int wcn36xx_smd_update_proberesp_tmpl(struct wcn36xx *wcn, + struct ieee80211_vif *vif, + struct sk_buff *skb); +int wcn36xx_smd_set_stakey(struct wcn36xx *wcn, + enum ani_ed_type enc_type, + u8 keyidx, + u8 keylen, + u8 *key, + u8 sta_index); +int wcn36xx_smd_set_bsskey(struct wcn36xx *wcn, + enum ani_ed_type enc_type, + u8 keyidx, + u8 keylen, + u8 *key); +int wcn36xx_smd_remove_stakey(struct wcn36xx *wcn, + enum ani_ed_type enc_type, + u8 keyidx, + u8 sta_index); +int wcn36xx_smd_remove_bsskey(struct wcn36xx *wcn, + enum ani_ed_type enc_type, + u8 keyidx); +int wcn36xx_smd_enter_bmps(struct wcn36xx *wcn, struct ieee80211_vif *vif); +int wcn36xx_smd_exit_bmps(struct wcn36xx *wcn, struct ieee80211_vif *vif); +int wcn36xx_smd_set_power_params(struct wcn36xx *wcn, bool ignore_dtim); +int wcn36xx_smd_keep_alive_req(struct wcn36xx *wcn, + struct ieee80211_vif *vif, + int packet_type); +int wcn36xx_smd_dump_cmd_req(struct wcn36xx *wcn, u32 arg1, u32 arg2, + u32 arg3, u32 arg4, u32 arg5); +int wcn36xx_smd_feature_caps_exchange(struct wcn36xx *wcn); + +int wcn36xx_smd_add_ba_session(struct wcn36xx *wcn, + struct ieee80211_sta *sta, + u16 tid, + u16 *ssn, + u8 direction, + u8 sta_index); +int wcn36xx_smd_add_ba(struct wcn36xx *wcn); +int wcn36xx_smd_del_ba(struct wcn36xx *wcn, u16 tid, u8 sta_index); +int wcn36xx_smd_trigger_ba(struct wcn36xx *wcn, u8 sta_index); + +int wcn36xx_smd_update_cfg(struct wcn36xx *wcn, u32 cfg_id, u32 value); +#endif /* _SMD_H_ */ diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c new file mode 100644 index 000000000000..b2b60e30caaf --- /dev/null +++ b/drivers/net/wireless/ath/wcn36xx/txrx.c @@ -0,0 +1,284 @@ +/* + * Copyright (c) 2013 Eugene Krasnikov + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "txrx.h" + +static inline int get_rssi0(struct wcn36xx_rx_bd *bd) +{ + return 100 - ((bd->phy_stat0 >> 24) & 0xff); +} + +int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb) +{ + struct ieee80211_rx_status status; + struct ieee80211_hdr *hdr; + struct wcn36xx_rx_bd *bd; + u16 fc, sn; + + /* + * All fields must be 0, otherwise it can lead to + * unexpected consequences. + */ + memset(&status, 0, sizeof(status)); + + bd = (struct wcn36xx_rx_bd *)skb->data; + buff_to_be((u32 *)bd, sizeof(*bd)/sizeof(u32)); + wcn36xx_dbg_dump(WCN36XX_DBG_RX_DUMP, + "BD <<< ", (char *)bd, + sizeof(struct wcn36xx_rx_bd)); + + skb_put(skb, bd->pdu.mpdu_header_off + bd->pdu.mpdu_len); + skb_pull(skb, bd->pdu.mpdu_header_off); + + status.mactime = 10; + status.freq = WCN36XX_CENTER_FREQ(wcn); + status.band = WCN36XX_BAND(wcn); + status.signal = -get_rssi0(bd); + status.antenna = 1; + status.rate_idx = 1; + status.flag = 0; + status.rx_flags = 0; + status.flag |= RX_FLAG_IV_STRIPPED | + RX_FLAG_MMIC_STRIPPED | + RX_FLAG_DECRYPTED; + + wcn36xx_dbg(WCN36XX_DBG_RX, "status.flags=%x status->vendor_radiotap_len=%x\n", + status.flag, status.vendor_radiotap_len); + + memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status)); + + hdr = (struct ieee80211_hdr *) skb->data; + fc = __le16_to_cpu(hdr->frame_control); + sn = IEEE80211_SEQ_TO_SN(__le16_to_cpu(hdr->seq_ctrl)); + + if (ieee80211_is_beacon(hdr->frame_control)) { + wcn36xx_dbg(WCN36XX_DBG_BEACON, "beacon skb %p len %d fc %04x sn %d\n", + skb, skb->len, fc, sn); + wcn36xx_dbg_dump(WCN36XX_DBG_BEACON_DUMP, "SKB <<< ", + (char *)skb->data, skb->len); + } else { + wcn36xx_dbg(WCN36XX_DBG_RX, "rx skb %p len %d fc %04x sn %d\n", + skb, skb->len, fc, sn); + wcn36xx_dbg_dump(WCN36XX_DBG_RX_DUMP, "SKB <<< ", + (char *)skb->data, skb->len); + } + + ieee80211_rx_irqsafe(wcn->hw, skb); + + return 0; +} + +static void wcn36xx_set_tx_pdu(struct wcn36xx_tx_bd *bd, + u32 mpdu_header_len, + u32 len, + u16 tid) +{ + bd->pdu.mpdu_header_len = mpdu_header_len; + bd->pdu.mpdu_header_off = sizeof(*bd); + bd->pdu.mpdu_data_off = bd->pdu.mpdu_header_len + + bd->pdu.mpdu_header_off; + bd->pdu.mpdu_len = len; + bd->pdu.tid = tid; +} + +static inline struct wcn36xx_vif *get_vif_by_addr(struct wcn36xx *wcn, + u8 *addr) +{ + struct wcn36xx_vif *vif_priv = NULL; + struct ieee80211_vif *vif = NULL; + list_for_each_entry(vif_priv, &wcn->vif_list, list) { + vif = container_of((void *)vif_priv, + struct ieee80211_vif, + drv_priv); + if (memcmp(vif->addr, addr, ETH_ALEN) == 0) + return vif_priv; + } + wcn36xx_warn("vif %pM not found\n", addr); + return NULL; +} +static void wcn36xx_set_tx_data(struct wcn36xx_tx_bd *bd, + struct wcn36xx *wcn, + struct wcn36xx_vif **vif_priv, + struct wcn36xx_sta *sta_priv, + struct ieee80211_hdr *hdr, + bool bcast) +{ + struct ieee80211_vif *vif = NULL; + struct wcn36xx_vif *__vif_priv = NULL; + bd->bd_rate = WCN36XX_BD_RATE_DATA; + + /* + * For not unicast frames mac80211 will not set sta pointer so use + * self_sta_index instead. + */ + if (sta_priv) { + __vif_priv = sta_priv->vif; + vif = container_of((void *)__vif_priv, + struct ieee80211_vif, + drv_priv); + + if (vif->type == NL80211_IFTYPE_STATION) { + bd->sta_index = sta_priv->bss_sta_index; + bd->dpu_desc_idx = sta_priv->bss_dpu_desc_index; + } else if (vif->type == NL80211_IFTYPE_AP || + vif->type == NL80211_IFTYPE_ADHOC || + vif->type == NL80211_IFTYPE_MESH_POINT) { + bd->sta_index = sta_priv->sta_index; + bd->dpu_desc_idx = sta_priv->dpu_desc_index; + } + } else { + __vif_priv = get_vif_by_addr(wcn, hdr->addr2); + bd->sta_index = __vif_priv->self_sta_index; + bd->dpu_desc_idx = __vif_priv->self_dpu_desc_index; + } + + bd->dpu_sign = __vif_priv->ucast_dpu_signature; + + if (ieee80211_is_nullfunc(hdr->frame_control) || + (sta_priv && !sta_priv->is_data_encrypted)) + bd->dpu_ne = 1; + + if (bcast) { + bd->ub = 1; + bd->ack_policy = 1; + } + *vif_priv = __vif_priv; +} + +static void wcn36xx_set_tx_mgmt(struct wcn36xx_tx_bd *bd, + struct wcn36xx *wcn, + struct wcn36xx_vif **vif_priv, + struct ieee80211_hdr *hdr, + bool bcast) +{ + struct wcn36xx_vif *__vif_priv = + get_vif_by_addr(wcn, hdr->addr2); + bd->sta_index = __vif_priv->self_sta_index; + bd->dpu_desc_idx = __vif_priv->self_dpu_desc_index; + bd->dpu_ne = 1; + + /* default rate for unicast */ + if (ieee80211_is_mgmt(hdr->frame_control)) + bd->bd_rate = (WCN36XX_BAND(wcn) == IEEE80211_BAND_5GHZ) ? + WCN36XX_BD_RATE_CTRL : + WCN36XX_BD_RATE_MGMT; + else if (ieee80211_is_ctl(hdr->frame_control)) + bd->bd_rate = WCN36XX_BD_RATE_CTRL; + else + wcn36xx_warn("frame control type unknown\n"); + + /* + * In joining state trick hardware that probe is sent as + * unicast even if address is broadcast. + */ + if (__vif_priv->is_joining && + ieee80211_is_probe_req(hdr->frame_control)) + bcast = false; + + if (bcast) { + /* broadcast */ + bd->ub = 1; + /* No ack needed not unicast */ + bd->ack_policy = 1; + bd->queue_id = WCN36XX_TX_B_WQ_ID; + } else + bd->queue_id = WCN36XX_TX_U_WQ_ID; + *vif_priv = __vif_priv; +} + +int wcn36xx_start_tx(struct wcn36xx *wcn, + struct wcn36xx_sta *sta_priv, + struct sk_buff *skb) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct wcn36xx_vif *vif_priv = NULL; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + unsigned long flags; + bool is_low = ieee80211_is_data(hdr->frame_control); + bool bcast = is_broadcast_ether_addr(hdr->addr1) || + is_multicast_ether_addr(hdr->addr1); + struct wcn36xx_tx_bd *bd = wcn36xx_dxe_get_next_bd(wcn, is_low); + + if (!bd) { + /* + * TX DXE are used in pairs. One for the BD and one for the + * actual frame. The BD DXE's has a preallocated buffer while + * the skb ones does not. If this isn't true something is really + * wierd. TODO: Recover from this situation + */ + + wcn36xx_err("bd address may not be NULL for BD DXE\n"); + return -EINVAL; + } + + memset(bd, 0, sizeof(*bd)); + + wcn36xx_dbg(WCN36XX_DBG_TX, + "tx skb %p len %d fc %04x sn %d %s %s\n", + skb, skb->len, __le16_to_cpu(hdr->frame_control), + IEEE80211_SEQ_TO_SN(__le16_to_cpu(hdr->seq_ctrl)), + is_low ? "low" : "high", bcast ? "bcast" : "ucast"); + + wcn36xx_dbg_dump(WCN36XX_DBG_TX_DUMP, "", skb->data, skb->len); + + bd->dpu_rf = WCN36XX_BMU_WQ_TX; + + bd->tx_comp = info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS; + if (bd->tx_comp) { + wcn36xx_dbg(WCN36XX_DBG_DXE, "TX_ACK status requested\n"); + spin_lock_irqsave(&wcn->dxe_lock, flags); + if (wcn->tx_ack_skb) { + spin_unlock_irqrestore(&wcn->dxe_lock, flags); + wcn36xx_warn("tx_ack_skb already set\n"); + return -EINVAL; + } + + wcn->tx_ack_skb = skb; + spin_unlock_irqrestore(&wcn->dxe_lock, flags); + + /* Only one at a time is supported by fw. Stop the TX queues + * until the ack status gets back. + * + * TODO: Add watchdog in case FW does not answer + */ + ieee80211_stop_queues(wcn->hw); + } + + /* Data frames served first*/ + if (is_low) { + wcn36xx_set_tx_data(bd, wcn, &vif_priv, sta_priv, hdr, bcast); + wcn36xx_set_tx_pdu(bd, + ieee80211_is_data_qos(hdr->frame_control) ? + sizeof(struct ieee80211_qos_hdr) : + sizeof(struct ieee80211_hdr_3addr), + skb->len, sta_priv ? sta_priv->tid : 0); + } else { + /* MGMT and CTRL frames are handeld here*/ + wcn36xx_set_tx_mgmt(bd, wcn, &vif_priv, hdr, bcast); + wcn36xx_set_tx_pdu(bd, + ieee80211_is_data_qos(hdr->frame_control) ? + sizeof(struct ieee80211_qos_hdr) : + sizeof(struct ieee80211_hdr_3addr), + skb->len, WCN36XX_TID); + } + + buff_to_be((u32 *)bd, sizeof(*bd)/sizeof(u32)); + bd->tx_bd_sign = 0xbdbdbdbd; + + return wcn36xx_dxe_tx_frame(wcn, vif_priv, skb, is_low); +} diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.h b/drivers/net/wireless/ath/wcn36xx/txrx.h new file mode 100644 index 000000000000..bbfbcf808c77 --- /dev/null +++ b/drivers/net/wireless/ath/wcn36xx/txrx.h @@ -0,0 +1,160 @@ +/* + * Copyright (c) 2013 Eugene Krasnikov + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _TXRX_H_ +#define _TXRX_H_ + +#include +#include "wcn36xx.h" + +/* TODO describe all properties */ +#define WCN36XX_802_11_HEADER_LEN 24 +#define WCN36XX_BMU_WQ_TX 25 +#define WCN36XX_TID 7 +/* broadcast wq ID */ +#define WCN36XX_TX_B_WQ_ID 0xA +#define WCN36XX_TX_U_WQ_ID 0x9 +/* bd_rate */ +#define WCN36XX_BD_RATE_DATA 0 +#define WCN36XX_BD_RATE_MGMT 2 +#define WCN36XX_BD_RATE_CTRL 3 + +struct wcn36xx_pdu { + u32 dpu_fb:8; + u32 adu_fb:8; + u32 pdu_id:16; + + /* 0x04*/ + u32 tail_pdu_idx:16; + u32 head_pdu_idx:16; + + /* 0x08*/ + u32 pdu_count:7; + u32 mpdu_data_off:9; + u32 mpdu_header_off:8; + u32 mpdu_header_len:8; + + /* 0x0c*/ + u32 reserved4:8; + u32 tid:4; + u32 reserved3:4; + u32 mpdu_len:16; +}; + +struct wcn36xx_rx_bd { + u32 bdt:2; + u32 ft:1; + u32 dpu_ne:1; + u32 rx_key_id:3; + u32 ub:1; + u32 rmf:1; + u32 uma_bypass:1; + u32 csr11:1; + u32 reserved0:1; + u32 scan_learn:1; + u32 rx_ch:4; + u32 rtsf:1; + u32 bsf:1; + u32 a2hf:1; + u32 st_auf:1; + u32 dpu_sign:3; + u32 dpu_rf:8; + + struct wcn36xx_pdu pdu; + + /* 0x14*/ + u32 addr3:8; + u32 addr2:8; + u32 addr1:8; + u32 dpu_desc_idx:8; + + /* 0x18*/ + u32 rxp_flags:23; + u32 rate_id:9; + + u32 phy_stat0; + u32 phy_stat1; + + /* 0x24 */ + u32 rx_times; + + u32 pmi_cmd[6]; + + /* 0x40 */ + u32 reserved7:4; + u32 reorder_slot_id:6; + u32 reorder_fwd_id:6; + u32 reserved6:12; + u32 reorder_code:4; + + /* 0x44 */ + u32 exp_seq_num:12; + u32 cur_seq_num:12; + u32 fr_type_subtype:8; + + /* 0x48 */ + u32 msdu_size:16; + u32 sub_fr_id:4; + u32 proc_order:4; + u32 reserved9:4; + u32 aef:1; + u32 lsf:1; + u32 esf:1; + u32 asf:1; +}; + +struct wcn36xx_tx_bd { + u32 bdt:2; + u32 ft:1; + u32 dpu_ne:1; + u32 fw_tx_comp:1; + u32 tx_comp:1; + u32 reserved1:1; + u32 ub:1; + u32 rmf:1; + u32 reserved0:12; + u32 dpu_sign:3; + u32 dpu_rf:8; + + struct wcn36xx_pdu pdu; + + /* 0x14*/ + u32 reserved5:7; + u32 queue_id:5; + u32 bd_rate:2; + u32 ack_policy:2; + u32 sta_index:8; + u32 dpu_desc_idx:8; + + u32 tx_bd_sign; + u32 reserved6; + u32 dxe_start_time; + u32 dxe_end_time; + + /*u32 tcp_udp_start_off:10; + u32 header_cks:16; + u32 reserved7:6;*/ +}; + +struct wcn36xx_sta; +struct wcn36xx; + +int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb); +int wcn36xx_start_tx(struct wcn36xx *wcn, + struct wcn36xx_sta *sta_priv, + struct sk_buff *skb); + +#endif /* _TXRX_H_ */ diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h new file mode 100644 index 000000000000..58b63833e8e7 --- /dev/null +++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h @@ -0,0 +1,238 @@ +/* + * Copyright (c) 2013 Eugene Krasnikov + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _WCN36XX_H_ +#define _WCN36XX_H_ + +#include +#include +#include +#include + +#include "hal.h" +#include "smd.h" +#include "txrx.h" +#include "dxe.h" +#include "pmc.h" +#include "debug.h" + +#define WLAN_NV_FILE "wlan/prima/WCNSS_qcom_wlan_nv.bin" +#define WCN36XX_AGGR_BUFFER_SIZE 64 + +extern unsigned int wcn36xx_dbg_mask; + +enum wcn36xx_debug_mask { + WCN36XX_DBG_DXE = 0x00000001, + WCN36XX_DBG_DXE_DUMP = 0x00000002, + WCN36XX_DBG_SMD = 0x00000004, + WCN36XX_DBG_SMD_DUMP = 0x00000008, + WCN36XX_DBG_RX = 0x00000010, + WCN36XX_DBG_RX_DUMP = 0x00000020, + WCN36XX_DBG_TX = 0x00000040, + WCN36XX_DBG_TX_DUMP = 0x00000080, + WCN36XX_DBG_HAL = 0x00000100, + WCN36XX_DBG_HAL_DUMP = 0x00000200, + WCN36XX_DBG_MAC = 0x00000400, + WCN36XX_DBG_BEACON = 0x00000800, + WCN36XX_DBG_BEACON_DUMP = 0x00001000, + WCN36XX_DBG_PMC = 0x00002000, + WCN36XX_DBG_PMC_DUMP = 0x00004000, + WCN36XX_DBG_ANY = 0xffffffff, +}; + +#define wcn36xx_err(fmt, arg...) \ + printk(KERN_ERR pr_fmt("ERROR " fmt), ##arg); + +#define wcn36xx_warn(fmt, arg...) \ + printk(KERN_WARNING pr_fmt("WARNING " fmt), ##arg) + +#define wcn36xx_info(fmt, arg...) \ + printk(KERN_INFO pr_fmt(fmt), ##arg) + +#define wcn36xx_dbg(mask, fmt, arg...) do { \ + if (wcn36xx_dbg_mask & mask) \ + printk(KERN_DEBUG pr_fmt(fmt), ##arg); \ +} while (0) + +#define wcn36xx_dbg_dump(mask, prefix_str, buf, len) do { \ + if (wcn36xx_dbg_mask & mask) \ + print_hex_dump(KERN_DEBUG, pr_fmt(prefix_str), \ + DUMP_PREFIX_OFFSET, 32, 1, \ + buf, len, false); \ +} while (0) + +#define WCN36XX_HW_CHANNEL(__wcn) (__wcn->hw->conf.chandef.chan->hw_value) +#define WCN36XX_BAND(__wcn) (__wcn->hw->conf.chandef.chan->band) +#define WCN36XX_CENTER_FREQ(__wcn) (__wcn->hw->conf.chandef.chan->center_freq) +#define WCN36XX_LISTEN_INTERVAL(__wcn) (__wcn->hw->conf.listen_interval) +#define WCN36XX_FLAGS(__wcn) (__wcn->hw->flags) +#define WCN36XX_MAX_POWER(__wcn) (__wcn->hw->conf.chandef.chan->max_power) + +static inline void buff_to_be(u32 *buf, size_t len) +{ + int i; + for (i = 0; i < len; i++) + buf[i] = cpu_to_be32(buf[i]); +} + +struct nv_data { + int is_valid; + u8 table; +}; + +/* Interface for platform control path + * + * @open: hook must be called when wcn36xx wants to open control channel. + * @tx: sends a buffer. + */ +struct wcn36xx_platform_ctrl_ops { + int (*open)(void *drv_priv, void *rsp_cb); + void (*close)(void); + int (*tx)(char *buf, size_t len); + int (*get_hw_mac)(u8 *addr); + int (*smsm_change_state)(u32 clear_mask, u32 set_mask); +}; + +/** + * struct wcn36xx_vif - holds VIF related fields + * + * @bss_index: bss_index is initially set to 0xFF. bss_index is received from + * HW after first config_bss call and must be used in delete_bss and + * enter/exit_bmps. + */ +struct wcn36xx_vif { + struct list_head list; + struct wcn36xx_sta *sta; + u8 dtim_period; + enum ani_ed_type encrypt_type; + bool is_joining; + struct wcn36xx_hal_mac_ssid ssid; + + /* Power management */ + enum wcn36xx_power_state pw_state; + + u8 bss_index; + u8 ucast_dpu_signature; + /* Returned from WCN36XX_HAL_ADD_STA_SELF_RSP */ + u8 self_sta_index; + u8 self_dpu_desc_index; +}; + +/** + * struct wcn36xx_sta - holds STA related fields + * + * @tid: traffic ID that is used during AMPDU and in TX BD. + * @sta_index: STA index is returned from HW after config_sta call and is + * used in both SMD channel and TX BD. + * @dpu_desc_index: DPU descriptor index is returned from HW after config_sta + * call and is used in TX BD. + * @bss_sta_index: STA index is returned from HW after config_bss call and is + * used in both SMD channel and TX BD. See table bellow when it is used. + * @bss_dpu_desc_index: DPU descriptor index is returned from HW after + * config_bss call and is used in TX BD. + * ______________________________________________ + * | | STA | AP | + * |______________|_____________|_______________| + * | TX BD |bss_sta_index| sta_index | + * |______________|_____________|_______________| + * |all SMD calls |bss_sta_index| sta_index | + * |______________|_____________|_______________| + * |smd_delete_sta| sta_index | sta_index | + * |______________|_____________|_______________| + */ +struct wcn36xx_sta { + struct wcn36xx_vif *vif; + u16 aid; + u16 tid; + u8 sta_index; + u8 dpu_desc_index; + u8 bss_sta_index; + u8 bss_dpu_desc_index; + bool is_data_encrypted; + /* Rates */ + struct wcn36xx_hal_supported_rates supported_rates; +}; +struct wcn36xx_dxe_ch; +struct wcn36xx { + struct ieee80211_hw *hw; + struct device *dev; + struct list_head vif_list; + + u8 fw_revision; + u8 fw_version; + u8 fw_minor; + u8 fw_major; + + /* extra byte for the NULL termination */ + u8 crm_version[WCN36XX_HAL_VERSION_LENGTH + 1]; + u8 wlan_version[WCN36XX_HAL_VERSION_LENGTH + 1]; + + /* IRQs */ + int tx_irq; + int rx_irq; + void __iomem *mmio; + + struct wcn36xx_platform_ctrl_ops *ctrl_ops; + /* + * smd_buf must be protected with smd_mutex to garantee + * that all messages are sent one after another + */ + u8 *hal_buf; + size_t hal_rsp_len; + struct mutex hal_mutex; + struct completion hal_rsp_compl; + struct workqueue_struct *hal_ind_wq; + struct work_struct hal_ind_work; + struct mutex hal_ind_mutex; + struct list_head hal_ind_queue; + + /* DXE channels */ + struct wcn36xx_dxe_ch dxe_tx_l_ch; /* TX low */ + struct wcn36xx_dxe_ch dxe_tx_h_ch; /* TX high */ + struct wcn36xx_dxe_ch dxe_rx_l_ch; /* RX low */ + struct wcn36xx_dxe_ch dxe_rx_h_ch; /* RX high */ + + /* For synchronization of DXE resources from BH, IRQ and WQ contexts */ + spinlock_t dxe_lock; + bool queues_stopped; + + /* Memory pools */ + struct wcn36xx_dxe_mem_pool mgmt_mem_pool; + struct wcn36xx_dxe_mem_pool data_mem_pool; + + struct sk_buff *tx_ack_skb; + +#ifdef CONFIG_WCN36XX_DEBUGFS + /* Debug file system entry */ + struct wcn36xx_dfs_entry dfs; +#endif /* CONFIG_WCN36XX_DEBUGFS */ + +}; + +static inline bool wcn36xx_is_fw_version(struct wcn36xx *wcn, + u8 major, + u8 minor, + u8 version, + u8 revision) +{ + return (wcn->fw_major == major && + wcn->fw_minor == minor && + wcn->fw_version == version && + wcn->fw_revision == revision); +} +void wcn36xx_set_default_rates(struct wcn36xx_hal_supported_rates *rates); + +#endif /* _WCN36XX_H_ */ From 21cf502a283937ec48bbce5a00af59e0c326ba90 Mon Sep 17 00:00:00 2001 From: Kirill Tkhai Date: Wed, 2 Oct 2013 00:40:46 +0400 Subject: [PATCH 26/61] rt2x00_pci: Fix interrupt handler name (visible at /proc/interrupts) Currently driver name is wrong. PCI device address is visible at /proc/interrupts instead of the name: 43: 124 0 0 0 PCI-MSI-edge rtsx_pci 44: 384 0 0 0 PCI-MSI-edge snd_hda_intel 45: 25096 0 0 0 PCI-MSI-edge 0000:01:00.0 ^^^^^^^^^^^^ So, pass the right name. rt2x00_ops->name contains KBUILD_MODNAME and good for that, so pass it. Handler names will be "rt2500pci", "rt2500pci" etc. Signed-off-by: Kirill Tkhai CC: Ivo van Doorn CC: Gertjan van Wingerde CC: Helmut Schaa CC: linux-wireless@vger.kernel.org Acked-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 76d95deb274b..6c5d667103c4 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -121,7 +121,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops) rt2x00dev->ops = ops; rt2x00dev->hw = hw; rt2x00dev->irq = pci_dev->irq; - rt2x00dev->name = pci_name(pci_dev); + rt2x00dev->name = ops->name; if (pci_is_pcie(pci_dev)) rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCIE); From 9f55c6201354183345fa06c6986668d159b6507f Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 2 Oct 2013 08:00:48 -0500 Subject: [PATCH 27/61] net: wireless: wl1251: update firmware path TI firmwares are located under ti-connectivity directory. Update path to make sure driver can find and load firmware blob. Signed-off-by: Felipe Balbi Signed-off-by: John W. Linville --- drivers/net/wireless/ti/wl1251/wl1251.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ti/wl1251/wl1251.h b/drivers/net/wireless/ti/wl1251/wl1251.h index fd02060038de..2c3bd1bff3f6 100644 --- a/drivers/net/wireless/ti/wl1251/wl1251.h +++ b/drivers/net/wireless/ti/wl1251/wl1251.h @@ -424,8 +424,8 @@ void wl1251_disable_interrupts(struct wl1251 *wl); #define CHIP_ID_1271_PG10 (0x4030101) #define CHIP_ID_1271_PG20 (0x4030111) -#define WL1251_FW_NAME "wl1251-fw.bin" -#define WL1251_NVS_NAME "wl1251-nvs.bin" +#define WL1251_FW_NAME "ti-connectivity/wl1251-fw.bin" +#define WL1251_NVS_NAME "ti-connectivity/wl1251-nvs.bin" #define WL1251_POWER_ON_SLEEP 10 /* in milliseconds */ From dfa0415bcbc606bd20c63d3119ed00839280690a Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Thu, 3 Oct 2013 13:49:09 +0200 Subject: [PATCH 28/61] bcma: reject PCI cards in bcma. bcma currently only supports PCIe cards and no PCI cards, reject them if we find them. I have never heard of any PCI card using the AI bus (bcma), all of them are using ssb instead. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/bcma/host_pci.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c index a355e63a3838..a1caf9c5b132 100644 --- a/drivers/bcma/host_pci.c +++ b/drivers/bcma/host_pci.c @@ -188,8 +188,11 @@ static int bcma_host_pci_probe(struct pci_dev *dev, pci_write_config_dword(dev, 0x40, val & 0xffff00ff); /* SSB needed additional powering up, do we have any AMBA PCI cards? */ - if (!pci_is_pcie(dev)) - bcma_err(bus, "PCI card detected, report problems.\n"); + if (!pci_is_pcie(dev)) { + bcma_err(bus, "PCI card detected, they are not supported.\n"); + err = -ENXIO; + goto err_pci_release_regions; + } /* Map MMIO */ err = -ENOMEM; From b9f54bd03fecab53ab57e0850350359b27a6e117 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Thu, 3 Oct 2013 13:49:10 +0200 Subject: [PATCH 29/61] bcma: add PCI id 0x4313 This PCI id is used by some BCM4313 cards without a sprom. I have seen such a card on a router connected to some BCM63XX SoC via PCIe. There are cards out there with the same PCI id and a BCM4311, which is a pre ieee80211n chip only supporting ieee80211a, these are still not supported by b43 and not detected by ssb. This devices was found by someone in this ticket: https://dev.openwrt.org/ticket/13551 Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/bcma/host_pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c index a1caf9c5b132..6fb98b53533f 100644 --- a/drivers/bcma/host_pci.c +++ b/drivers/bcma/host_pci.c @@ -272,6 +272,7 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_host_pci_suspend, static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4313) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, From 7d9b3589dfea43fb49ebc13205b5feadc4e364d7 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Thu, 3 Oct 2013 13:49:11 +0200 Subject: [PATCH 30/61] brcmsmac: add support for a BCM4313 with PCI id 0x4313 There are some BCM4313 out there with a PCI id of 0x4313. These devices are missing a sprom and are only used on routers or other embedded devices. We found one connected to a BCM63XX SoC. This devices was found by someone in this ticket: https://dev.openwrt.org/ticket/13551 Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 4608e0eb1493..df6229ed52c8 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -5695,7 +5695,7 @@ static bool brcms_c_chipmatch_pci(struct bcma_device *core) return true; if ((device == BCM43224_D11N_ID) || (device == BCM43225_D11N2G_ID)) return true; - if (device == BCM4313_D11N2G_ID) + if (device == BCM4313_D11N2G_ID || device == BCM4313_CHIP_ID) return true; if ((device == BCM43236_D11N_ID) || (device == BCM43236_D11N2G_ID)) return true; From a750db9e5cd4b7ec798d29fb09742890e6d78c27 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 3 Oct 2013 14:07:01 +0200 Subject: [PATCH 31/61] rt2x00: rt2800lib: remove TXMIXER_GAIN entries from the extended EEPROM map The comments are indicating that the TXMIXER_GAIN_BG and TXMIXED_GAIN_A entries are overlapping with the RSSI_BG2 and RSSI_A2 entries in the extended EEPROM map. This is not correct, because the upper byte of the RSSI_BG2 and RSSI_A2 entries are reserved. There are no TX mixer gain values are stored at all in the extended EEPROM. Remove the initialization of these entries from the extended EEPROM map to reflect this. Signed-off-by: Gabor Juhos Acked-by: Paul Menzel Acked-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 25aaa5e12d4e..27cdf5bbc12a 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -280,10 +280,8 @@ static const unsigned int rt2800_eeprom_map_ext[EEPROM_WORD_COUNT] = { [EEPROM_RSSI_BG] = 0x0028, [EEPROM_TXPOWER_DELTA] = 0x0028, /* Overlaps with RSSI_BG */ [EEPROM_RSSI_BG2] = 0x0029, - [EEPROM_TXMIXER_GAIN_BG] = 0x0029, /* Overlaps with RSSI_BG2 */ [EEPROM_RSSI_A] = 0x002a, [EEPROM_RSSI_A2] = 0x002b, - [EEPROM_TXMIXER_GAIN_A] = 0x002b, /* Overlaps with RSSI_A2 */ [EEPROM_TXPOWER_BG1] = 0x0030, [EEPROM_TXPOWER_BG2] = 0x0037, [EEPROM_EXT_TXPOWER_BG3] = 0x003e, From cdabcb2bd91f6964e6cbb97513890318dc7110e1 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 3 Oct 2013 14:07:02 +0200 Subject: [PATCH 32/61] rt2x00: rt2800lib: remove TXPOWER_DELTA entry from extended EEPROM map The TXPOWER_DELTA field of the regular EEPROM stores the TX power compensation value for HT40. The extended EEPROM has no such field, it stores separate TX power values for HT20 and for HT40. Signed-off-by: Gabor Juhos Acked-by: Paul Menzel Acked-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 27cdf5bbc12a..6163f87374fd 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -278,7 +278,6 @@ static const unsigned int rt2800_eeprom_map_ext[EEPROM_WORD_COUNT] = { [EEPROM_LNA] = 0x0026, [EEPROM_EXT_LNA2] = 0x0027, [EEPROM_RSSI_BG] = 0x0028, - [EEPROM_TXPOWER_DELTA] = 0x0028, /* Overlaps with RSSI_BG */ [EEPROM_RSSI_BG2] = 0x0029, [EEPROM_RSSI_A] = 0x002a, [EEPROM_RSSI_A2] = 0x002b, From 0ffd2a9a44ceb80e4e58fc3570bb5c941211d77f Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 3 Oct 2013 20:00:42 +0200 Subject: [PATCH 33/61] rt2x00: rt2800lib: fix default VGC values for RT3593 Update the rt2800_get_default_vgc function to use the same VGC values that the DPO_RT5572_LinuxSTA_2.6.1.3_20121022 reference driver uses. References: RT35xx_ChipAGCAdjust in chips/rt35xx.c RT3593_R66_MID_LOW_SENS_GET macro in include/chip/rt3593.h RT3593_R66_NON_MID_LOW_SEMS_GET macro in include/chips/rt3593.h Signed-off-by: Gabor Juhos Acked-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 6163f87374fd..eff0f56cf618 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -4413,6 +4413,7 @@ static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev) rt2x00_rt(rt2x00dev, RT3290) || rt2x00_rt(rt2x00dev, RT3390) || rt2x00_rt(rt2x00dev, RT3572) || + rt2x00_rt(rt2x00dev, RT3593) || rt2x00_rt(rt2x00dev, RT5390) || rt2x00_rt(rt2x00dev, RT5392) || rt2x00_rt(rt2x00dev, RT5592)) @@ -4422,6 +4423,8 @@ static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev) } else { /* 5GHZ band */ if (rt2x00_rt(rt2x00dev, RT3572)) vgc = 0x22 + (rt2x00dev->lna_gain * 5) / 3; + else if (rt2x00_rt(rt2x00dev, RT3593)) + vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3; else if (rt2x00_rt(rt2x00dev, RT5592)) vgc = 0x24 + (2 * rt2x00dev->lna_gain); else { From 271f1a4d70c34ff1ff7a9e3b1fd56068757f24b1 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 3 Oct 2013 20:00:43 +0200 Subject: [PATCH 34/61] rt2x00: rt2800lib: fix VGC programming for RT3572 and RT3593 According to the DPO_RT5572_LinuxSTA_2.6.1.3_20121022 reference driver, programming of the 'BBP 66' register on the RT3572 and RT3593 chipsets must be done via the 'rt2800_bbp_write_with_rx_chain' function. This ensures that value is correclty set for all RX chains. References: RT35xx_ChipAGCAdjust and RT35xx_SetAGCInitValue functions in chips/rt35xx.c Signed-off-by: Gabor Juhos Acked-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index eff0f56cf618..47ef81ba605d 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -4442,11 +4442,17 @@ static inline void rt2800_set_vgc(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, u8 vgc_level) { if (qual->vgc_level != vgc_level) { - if (rt2x00_rt(rt2x00dev, RT5592)) { + if (rt2x00_rt(rt2x00dev, RT3572) || + rt2x00_rt(rt2x00dev, RT3593)) { + rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, + vgc_level); + } else if (rt2x00_rt(rt2x00dev, RT5592)) { rt2800_bbp_write(rt2x00dev, 83, qual->rssi > -65 ? 0x4a : 0x7a); rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, vgc_level); - } else + } else { rt2800_bbp_write(rt2x00dev, 66, vgc_level); + } + qual->vgc_level = vgc_level; qual->vgc_level_reg = vgc_level; } From 733aec6a5bd39ba34ddd0568b7f7394aec2541fb Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Fri, 4 Oct 2013 22:07:09 +0200 Subject: [PATCH 35/61] rt2x00: rt2800lib: fix default VGC values for RT3572 for the 5GHz band The rt2x00 driver uses 0x22 as a default VGC value in VGC adjustment for the RT3572 chipset. In the Ralink DPO_RT5572_LinuxSTA_2.6.1.3_20121022 driver, this value is only used for initialization. During VGC adjustment, the reference driver uses different values. Update the 'rt2800_get_default_vgc' function to synchronize the values with the reference driver. Also add the missing AGC initialization code into the 'rt2800_config_channel' function. References: RT35xx_SetAGCInitValue in chip/rt35xx.c RT35xx_ChipAGCAdjust in chip/rt35xx.c Signed-off-by: Gabor Juhos Acked-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 47ef81ba605d..3ea1b96204fa 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -3310,9 +3310,18 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); - if (rt2x00_rt(rt2x00dev, RT3572)) + if (rt2x00_rt(rt2x00dev, RT3572)) { rt2800_rfcsr_write(rt2x00dev, 8, 0x80); + /* AGC init */ + if (rf->channel <= 14) + reg = 0x1c + (2 * rt2x00dev->lna_gain); + else + reg = 0x22 + ((rt2x00dev->lna_gain * 5) / 3); + + rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); + } + if (rt2x00_rt(rt2x00dev, RT3593)) { rt2800_register_read(rt2x00dev, GPIO_CTRL, ®); @@ -4421,9 +4430,7 @@ static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev) else vgc = 0x2e + rt2x00dev->lna_gain; } else { /* 5GHZ band */ - if (rt2x00_rt(rt2x00dev, RT3572)) - vgc = 0x22 + (rt2x00dev->lna_gain * 5) / 3; - else if (rt2x00_rt(rt2x00dev, RT3593)) + if (rt2x00_rt(rt2x00dev, RT3593)) vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3; else if (rt2x00_rt(rt2x00dev, RT5592)) vgc = 0x24 + (2 * rt2x00dev->lna_gain); From fdbdd25c47ac1db04a161308dfb1060869eba982 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Sat, 5 Oct 2013 18:15:33 +0200 Subject: [PATCH 36/61] rt2x00: do not pause queue on flush Pausing queue on flush make no sense since txdone procedure un-pause queue. Before flush procedure we have to assure queue is stopped, i.e. on receive path h/w RX is disabled, on transmit path queue is disabled in mac80211. That conditions are true except one function: rt2x00usb_watchdog_tx_dma(), so add stop/start queue there. Note stop/start queue can be racy if we do this from multiple paths, but currently we stop TX queues only on rt2x00lib_disable_radio(), which also stop/sync watchdog, hance we have no race condition. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00queue.c | 37 ++++------------------- drivers/net/wireless/rt2x00/rt2x00usb.c | 2 ++ 2 files changed, 8 insertions(+), 31 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 6c8a33b6ee22..218e3206ce1b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -1033,38 +1033,21 @@ EXPORT_SYMBOL_GPL(rt2x00queue_stop_queue); void rt2x00queue_flush_queue(struct data_queue *queue, bool drop) { - bool started; bool tx_queue = (queue->qid == QID_AC_VO) || (queue->qid == QID_AC_VI) || (queue->qid == QID_AC_BE) || (queue->qid == QID_AC_BK); - mutex_lock(&queue->status_lock); /* - * If the queue has been started, we must stop it temporarily - * to prevent any new frames to be queued on the device. If - * we are not dropping the pending frames, the queue must - * only be stopped in the software and not the hardware, - * otherwise the queue will never become empty on its own. + * If we are not supposed to drop any pending + * frames, this means we must force a start (=kick) + * to the queue to make sure the hardware will + * start transmitting. */ - started = test_bit(QUEUE_STARTED, &queue->flags); - if (started) { - /* - * Pause the queue - */ - rt2x00queue_pause_queue(queue); - - /* - * If we are not supposed to drop any pending - * frames, this means we must force a start (=kick) - * to the queue to make sure the hardware will - * start transmitting. - */ - if (!drop && tx_queue) - queue->rt2x00dev->ops->lib->kick_queue(queue); - } + if (!drop && tx_queue) + queue->rt2x00dev->ops->lib->kick_queue(queue); /* * Check if driver supports flushing, if that is the case we can @@ -1080,14 +1063,6 @@ void rt2x00queue_flush_queue(struct data_queue *queue, bool drop) if (unlikely(!rt2x00queue_empty(queue))) rt2x00_warn(queue->rt2x00dev, "Queue %d failed to flush\n", queue->qid); - - /* - * Restore the queue to the previous status - */ - if (started) - rt2x00queue_unpause_queue(queue); - - mutex_unlock(&queue->status_lock); } EXPORT_SYMBOL_GPL(rt2x00queue_flush_queue); diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 88289873c0cf..4e121627925d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -523,7 +523,9 @@ static void rt2x00usb_watchdog_tx_dma(struct data_queue *queue) rt2x00_warn(queue->rt2x00dev, "TX queue %d DMA timed out, invoke forced forced reset\n", queue->qid); + rt2x00queue_stop_queue(queue); rt2x00queue_flush_queue(queue, true); + rt2x00queue_start_queue(queue); } static int rt2x00usb_dma_timeout(struct data_queue *queue) From a9b1d9ac8c093e9ca011c105b7456e92c12e7320 Mon Sep 17 00:00:00 2001 From: Michael Opdenacker Date: Sun, 6 Oct 2013 07:04:06 +0200 Subject: [PATCH 37/61] net: p54spi: remove deprecated IRQF_DISABLED This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c index 7fc46f26cf2b..de15171e2cd8 100644 --- a/drivers/net/wireless/p54/p54spi.c +++ b/drivers/net/wireless/p54/p54spi.c @@ -636,7 +636,7 @@ static int p54spi_probe(struct spi_device *spi) gpio_direction_input(p54spi_gpio_irq); ret = request_irq(gpio_to_irq(p54spi_gpio_irq), - p54spi_interrupt, IRQF_DISABLED, "p54spi", + p54spi_interrupt, 0, "p54spi", priv->spi); if (ret < 0) { dev_err(&priv->spi->dev, "request_irq() failed"); From 8f78b0bb8791d8164aed86970905cdc12f3b8496 Mon Sep 17 00:00:00 2001 From: Kevin Lo Date: Mon, 7 Oct 2013 16:02:01 +0800 Subject: [PATCH 38/61] rt2x00: rt2800lib: no need to toggle RF R30 bit 7 twice In rt2800_config_channel_rf3xxx(), there's no need to toggle RF R30 bit 7 twice. Signed-off-by: Kevin Lo Acked-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 3ea1b96204fa..5a230c42fb0d 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2026,13 +2026,6 @@ static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev, rt2x00dev->default_ant.tx_chain_num <= 2); rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); - rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); - rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); - msleep(1); - rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); - rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); - rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); From 1dc254ac9f04f23d332ed8eea79055f067c90627 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Wed, 9 Oct 2013 11:00:38 +0200 Subject: [PATCH 39/61] rt2x00: use generic EWMA functions for average RSSI calculations Remove the local MOVING_AVERAGE implementation, and use the generic EWMA functions instead. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/Kconfig | 1 + drivers/net/wireless/rt2x00/rt2x00.h | 16 +----- drivers/net/wireless/rt2x00/rt2x00link.c | 70 +++++++++--------------- 3 files changed, 29 insertions(+), 58 deletions(-) diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 68dbbb9c6d12..a18b0051a745 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -219,6 +219,7 @@ config RT2X00_LIB_USB config RT2X00_LIB tristate + select AVERAGE config RT2X00_LIB_FIRMWARE boolean diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index fe4c572db52c..30ed92a6121e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -39,6 +39,7 @@ #include #include #include +#include #include @@ -138,17 +139,6 @@ #define SHORT_EIFS ( SIFS + SHORT_DIFS + \ GET_DURATION(IEEE80211_HEADER + ACK_SIZE, 10) ) -/* - * Structure for average calculation - * The avg field contains the actual average value, - * but avg_weight is internally used during calculations - * to prevent rounding errors. - */ -struct avg_val { - int avg; - int avg_weight; -}; - enum rt2x00_chip_intf { RT2X00_CHIP_INTF_PCI, RT2X00_CHIP_INTF_PCIE, @@ -297,7 +287,7 @@ struct link_ant { * Similar to the avg_rssi in the link_qual structure * this value is updated by using the walking average. */ - struct avg_val rssi_ant; + struct ewma rssi_ant; }; /* @@ -326,7 +316,7 @@ struct link { /* * Currently active average RSSI value */ - struct avg_val avg_rssi; + struct ewma avg_rssi; /* * Work structure for scheduling periodic link tuning. diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c index 8368aab86f28..a0e3c021c128 100644 --- a/drivers/net/wireless/rt2x00/rt2x00link.c +++ b/drivers/net/wireless/rt2x00/rt2x00link.c @@ -35,50 +35,28 @@ */ #define DEFAULT_RSSI -128 -/* - * Helper struct and macro to work with moving/walking averages. - * When adding a value to the average value the following calculation - * is needed: - * - * avg_rssi = ((avg_rssi * 7) + rssi) / 8; - * - * The advantage of this approach is that we only need 1 variable - * to store the average in (No need for a count and a total). - * But more importantly, normal average values will over time - * move less and less towards newly added values this results - * that with link tuning, the device can have a very good RSSI - * for a few minutes but when the device is moved away from the AP - * the average will not decrease fast enough to compensate. - * The walking average compensates this and will move towards - * the new values correctly allowing a effective link tuning, - * the speed of the average moving towards other values depends - * on the value for the number of samples. The higher the number - * of samples, the slower the average will move. - * We use two variables to keep track of the average value to - * compensate for the rounding errors. This can be a significant - * error (>5dBm) if the factor is too low. - */ -#define AVG_SAMPLES 8 -#define AVG_FACTOR 1000 -#define MOVING_AVERAGE(__avg, __val) \ -({ \ - struct avg_val __new; \ - __new.avg_weight = \ - (__avg).avg_weight ? \ - ((((__avg).avg_weight * ((AVG_SAMPLES) - 1)) + \ - ((__val) * (AVG_FACTOR))) / \ - (AVG_SAMPLES)) : \ - ((__val) * (AVG_FACTOR)); \ - __new.avg = __new.avg_weight / (AVG_FACTOR); \ - __new; \ -}) +/* Constants for EWMA calculations. */ +#define RT2X00_EWMA_FACTOR 1024 +#define RT2X00_EWMA_WEIGHT 8 + +static inline int rt2x00link_get_avg_rssi(struct ewma *ewma) +{ + unsigned long avg; + + avg = ewma_read(ewma); + if (avg) + return -avg; + + return DEFAULT_RSSI; +} static int rt2x00link_antenna_get_link_rssi(struct rt2x00_dev *rt2x00dev) { struct link_ant *ant = &rt2x00dev->link.ant; - if (ant->rssi_ant.avg && rt2x00dev->link.qual.rx_success) - return ant->rssi_ant.avg; + if (rt2x00dev->link.qual.rx_success) + return rt2x00link_get_avg_rssi(&ant->rssi_ant); + return DEFAULT_RSSI; } @@ -100,8 +78,8 @@ static void rt2x00link_antenna_update_rssi_history(struct rt2x00_dev *rt2x00dev, static void rt2x00link_antenna_reset(struct rt2x00_dev *rt2x00dev) { - rt2x00dev->link.ant.rssi_ant.avg = 0; - rt2x00dev->link.ant.rssi_ant.avg_weight = 0; + ewma_init(&rt2x00dev->link.ant.rssi_ant, RT2X00_EWMA_FACTOR, + RT2X00_EWMA_WEIGHT); } static void rt2x00lib_antenna_diversity_sample(struct rt2x00_dev *rt2x00dev) @@ -249,12 +227,12 @@ void rt2x00link_update_stats(struct rt2x00_dev *rt2x00dev, /* * Update global RSSI */ - link->avg_rssi = MOVING_AVERAGE(link->avg_rssi, rxdesc->rssi); + ewma_add(&link->avg_rssi, -rxdesc->rssi); /* * Update antenna RSSI */ - ant->rssi_ant = MOVING_AVERAGE(ant->rssi_ant, rxdesc->rssi); + ewma_add(&ant->rssi_ant, -rxdesc->rssi); } void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev) @@ -309,6 +287,8 @@ void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna) */ rt2x00dev->link.count = 0; memset(qual, 0, sizeof(*qual)); + ewma_init(&rt2x00dev->link.avg_rssi, RT2X00_EWMA_FACTOR, + RT2X00_EWMA_WEIGHT); /* * Restore the VGC level as stored in the registers, @@ -363,10 +343,10 @@ static void rt2x00link_tuner(struct work_struct *work) * collect the RSSI data we could use this. Otherwise we * must fallback to the default RSSI value. */ - if (!link->avg_rssi.avg || !qual->rx_success) + if (!qual->rx_success) qual->rssi = DEFAULT_RSSI; else - qual->rssi = link->avg_rssi.avg; + qual->rssi = rt2x00link_get_avg_rssi(&link->avg_rssi); /* * Check if link tuning is supported by the hardware, some hardware From 0beb1bbf19c72f17809e42b8f33522a55c2cc18c Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 3 Oct 2013 20:00:40 +0200 Subject: [PATCH 40/61] rt2x00: rt2800lib: fix VGC adjustment for RT5592 In commit 3d81535ea5940446510a8a5cee1c6ad23c90c753 (rt2800: 5592: add chip specific vgc calculations) the rt2800_link_tuner function has been modified to adjust VGC level for the RT5592 chipset. On the RT5592 chipset, the VGC level must be adjusted only if rssi is greater than -65. However the current code adjusts the VGC value by 0x10 regardless of the actual chipset if the rssi value is between -80 and -65. Fix the broken behaviour by reordering the if-else statements. Cc: stable@vger.kernel.org Signed-off-by: Gabor Juhos Acked-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 5a230c42fb0d..be68b0485833 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -4478,10 +4478,13 @@ void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, vgc = rt2800_get_default_vgc(rt2x00dev); - if (rt2x00_rt(rt2x00dev, RT5592) && qual->rssi > -65) - vgc += 0x20; - else if (qual->rssi > -80) - vgc += 0x10; + if (rt2x00_rt(rt2x00dev, RT5592)) { + if (qual->rssi > -65) + vgc += 0x20; + } else { + if (qual->rssi > -80) + vgc += 0x10; + } rt2800_set_vgc(rt2x00dev, qual, vgc); } From e25aa82a89db9e3b09d02b5481aa375c7712a10d Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 3 Oct 2013 20:00:41 +0200 Subject: [PATCH 41/61] rt2x00: rt2800lib: fix VGC adjustment for RT3572 and RT3593 The Ralink DPO_RT5572_LinuxSTA_2.6.1.3_20121022 reference driver uses different RSSI threshold and VGC adjustment values for the RT3572 and RT3593 chipsets. Update the rt2800_link_tuner function to use the same values. Also change the comment in the function to make it more generic. References: RT35xx_ChipAGCAdjust function in chips/rt35xx.c RSSI_FOR_MID_LOW_SENSIBILITY constant in include/chip/rtmp_phy.h RT3593_R66_MID_LOW_SENS_GET macro in include/chip/rt3593.h RT3593_R66_NON_MID_LOW_SEMS_GET macro in include/chips/rt3593.h Signed-off-by: Gabor Juhos Acked-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index be68b0485833..a114cab413e9 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -4471,19 +4471,34 @@ void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) return; - /* - * When RSSI is better then -80 increase VGC level with 0x10, except - * for rt5592 chip. + + /* When RSSI is better than a certain threshold, increase VGC + * with a chip specific value in order to improve the balance + * between sensibility and noise isolation. */ vgc = rt2800_get_default_vgc(rt2x00dev); - if (rt2x00_rt(rt2x00dev, RT5592)) { + switch (rt2x00dev->chip.rt) { + case RT3572: + case RT3593: + if (qual->rssi > -65) { + if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) + vgc += 0x20; + else + vgc += 0x10; + } + break; + + case RT5592: if (qual->rssi > -65) vgc += 0x20; - } else { + break; + + default: if (qual->rssi > -80) vgc += 0x10; + break; } rt2800_set_vgc(rt2x00dev, qual, vgc); From 42f920c90d881535c049d776b692ccde3f5a10d5 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Fri, 11 Oct 2013 12:50:08 +0200 Subject: [PATCH 42/61] rt2x00: cleanup indentation in rt2800.h Adjust whitespaces to move badly aligned constants to the right column. The patch contains no functional changes. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800.h | 42 ++++++++++++++-------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index e3eb95292a7f..aab6b5e4f5dd 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -124,7 +124,7 @@ /* * MAC_CSR0_3290: MAC_CSR0 for RT3290 to identity MAC version number. */ -#define MAC_CSR0_3290 0x0000 +#define MAC_CSR0_3290 0x0000 /* * E2PROM_CSR: PCI EEPROM control register. @@ -213,17 +213,17 @@ /* * COEX_CFG_0 */ -#define COEX_CFG0 0x0040 +#define COEX_CFG0 0x0040 #define COEX_CFG_ANT FIELD32(0xff000000) /* * COEX_CFG_1 */ -#define COEX_CFG1 0x0044 +#define COEX_CFG1 0x0044 /* * COEX_CFG_2 */ -#define COEX_CFG2 0x0048 +#define COEX_CFG2 0x0048 #define BT_COEX_CFG1 FIELD32(0xff000000) #define BT_COEX_CFG0 FIELD32(0x00ff0000) #define WL_COEX_CFG1 FIELD32(0x0000ff00) @@ -237,8 +237,8 @@ #define PLL_RESERVED_INPUT2 FIELD32(0x0000ff00) #define PLL_CONTROL FIELD32(0x00070000) #define PLL_LPF_R1 FIELD32(0x00080000) -#define PLL_LPF_C1_CTRL FIELD32(0x00300000) -#define PLL_LPF_C2_CTRL FIELD32(0x00c00000) +#define PLL_LPF_C1_CTRL FIELD32(0x00300000) +#define PLL_LPF_C2_CTRL FIELD32(0x00c00000) #define PLL_CP_CURRENT_CTRL FIELD32(0x03000000) #define PLL_PFD_DELAY_CTRL FIELD32(0x0c000000) #define PLL_LOCK_CTRL FIELD32(0x70000000) @@ -2166,7 +2166,7 @@ struct mac_iveiv_entry { */ #define RFCSR6_R1 FIELD8(0x03) #define RFCSR6_R2 FIELD8(0x40) -#define RFCSR6_TXDIV FIELD8(0x0c) +#define RFCSR6_TXDIV FIELD8(0x0c) /* bits for RF3053 */ #define RFCSR6_VCO_IC FIELD8(0xc0) @@ -2204,13 +2204,13 @@ struct mac_iveiv_entry { * RFCSR 12: */ #define RFCSR12_TX_POWER FIELD8(0x1f) -#define RFCSR12_DR0 FIELD8(0xe0) +#define RFCSR12_DR0 FIELD8(0xe0) /* * RFCSR 13: */ #define RFCSR13_TX_POWER FIELD8(0x1f) -#define RFCSR13_DR0 FIELD8(0xe0) +#define RFCSR13_DR0 FIELD8(0xe0) /* * RFCSR 15: @@ -2228,7 +2228,7 @@ struct mac_iveiv_entry { #define RFCSR17_TXMIXER_GAIN FIELD8(0x07) #define RFCSR17_TX_LO1_EN FIELD8(0x08) #define RFCSR17_R FIELD8(0x20) -#define RFCSR17_CODE FIELD8(0x7f) +#define RFCSR17_CODE FIELD8(0x7f) /* RFCSR 18 */ #define RFCSR18_XO_TUNE_BYPASS FIELD8(0x40) @@ -2451,7 +2451,7 @@ enum rt2800_eeprom_word { */ #define EEPROM_NIC_CONF0_RXPATH FIELD16(0x000f) #define EEPROM_NIC_CONF0_TXPATH FIELD16(0x00f0) -#define EEPROM_NIC_CONF0_RF_TYPE FIELD16(0x0f00) +#define EEPROM_NIC_CONF0_RF_TYPE FIELD16(0x0f00) /* * EEPROM NIC Configuration 1 @@ -2473,18 +2473,18 @@ enum rt2800_eeprom_word { * DAC_TEST: 0: disable, 1: enable */ #define EEPROM_NIC_CONF1_HW_RADIO FIELD16(0x0001) -#define EEPROM_NIC_CONF1_EXTERNAL_TX_ALC FIELD16(0x0002) -#define EEPROM_NIC_CONF1_EXTERNAL_LNA_2G FIELD16(0x0004) -#define EEPROM_NIC_CONF1_EXTERNAL_LNA_5G FIELD16(0x0008) +#define EEPROM_NIC_CONF1_EXTERNAL_TX_ALC FIELD16(0x0002) +#define EEPROM_NIC_CONF1_EXTERNAL_LNA_2G FIELD16(0x0004) +#define EEPROM_NIC_CONF1_EXTERNAL_LNA_5G FIELD16(0x0008) #define EEPROM_NIC_CONF1_CARDBUS_ACCEL FIELD16(0x0010) #define EEPROM_NIC_CONF1_BW40M_SB_2G FIELD16(0x0020) #define EEPROM_NIC_CONF1_BW40M_SB_5G FIELD16(0x0040) #define EEPROM_NIC_CONF1_WPS_PBC FIELD16(0x0080) #define EEPROM_NIC_CONF1_BW40M_2G FIELD16(0x0100) #define EEPROM_NIC_CONF1_BW40M_5G FIELD16(0x0200) -#define EEPROM_NIC_CONF1_BROADBAND_EXT_LNA FIELD16(0x400) +#define EEPROM_NIC_CONF1_BROADBAND_EXT_LNA FIELD16(0x400) #define EEPROM_NIC_CONF1_ANT_DIVERSITY FIELD16(0x1800) -#define EEPROM_NIC_CONF1_INTERNAL_TX_ALC FIELD16(0x2000) +#define EEPROM_NIC_CONF1_INTERNAL_TX_ALC FIELD16(0x2000) #define EEPROM_NIC_CONF1_BT_COEXIST FIELD16(0x4000) #define EEPROM_NIC_CONF1_DAC_TEST FIELD16(0x8000) @@ -2523,9 +2523,9 @@ enum rt2800_eeprom_word { * TX_STREAM: 0: Reserved, 1: 1 Stream, 2: 2 Stream * CRYSTAL: 00: Reserved, 01: One crystal, 10: Two crystal, 11: Reserved */ -#define EEPROM_NIC_CONF2_RX_STREAM FIELD16(0x000f) -#define EEPROM_NIC_CONF2_TX_STREAM FIELD16(0x00f0) -#define EEPROM_NIC_CONF2_CRYSTAL FIELD16(0x0600) +#define EEPROM_NIC_CONF2_RX_STREAM FIELD16(0x000f) +#define EEPROM_NIC_CONF2_TX_STREAM FIELD16(0x00f0) +#define EEPROM_NIC_CONF2_CRYSTAL FIELD16(0x0600) /* * EEPROM LNA @@ -2792,7 +2792,7 @@ enum rt2800_eeprom_word { #define MCU_CURRENT 0x36 #define MCU_LED 0x50 #define MCU_LED_STRENGTH 0x51 -#define MCU_LED_AG_CONF 0x52 +#define MCU_LED_AG_CONF 0x52 #define MCU_LED_ACT_CONF 0x53 #define MCU_LED_LED_POLARITY 0x54 #define MCU_RADAR 0x60 @@ -2801,7 +2801,7 @@ enum rt2800_eeprom_word { #define MCU_FREQ_OFFSET 0x74 #define MCU_BBP_SIGNAL 0x80 #define MCU_POWER_SAVE 0x83 -#define MCU_BAND_SELECT 0x91 +#define MCU_BAND_SELECT 0x91 /* * MCU mailbox tokens From a44d01419ca4f8f4bec721504fa257b6c438c77c Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Fri, 11 Oct 2013 13:18:40 +0200 Subject: [PATCH 43/61] rt2x00: add rt2x00_has_cap_* helpers The rt2x00 code directly accesses the 'cap_flags' field of 'struct rt2x00_dev' when checking presence of a given capability flag. The direct access needs long expressions which lowers readability of the code. Add a few helper functions which can be used to test device capabilities without directly accessing the cap_flags filed. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00.h | 87 ++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 30ed92a6121e..e4ba2ce0f212 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -1169,6 +1169,93 @@ static inline bool rt2x00_is_soc(struct rt2x00_dev *rt2x00dev) return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_SOC); } +/* Helpers for capability flags */ + +static inline bool +rt2x00_has_cap_flag(struct rt2x00_dev *rt2x00dev, + enum rt2x00_capability_flags cap_flag) +{ + return test_bit(cap_flag, &rt2x00dev->cap_flags); +} + +static inline bool +rt2x00_has_cap_hw_crypto(struct rt2x00_dev *rt2x00dev) +{ + return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_HW_CRYPTO); +} + +static inline bool +rt2x00_has_cap_power_limit(struct rt2x00_dev *rt2x00dev) +{ + return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_POWER_LIMIT); +} + +static inline bool +rt2x00_has_cap_control_filters(struct rt2x00_dev *rt2x00dev) +{ + return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_CONTROL_FILTERS); +} + +static inline bool +rt2x00_has_cap_control_filter_pspoll(struct rt2x00_dev *rt2x00dev) +{ + return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_CONTROL_FILTER_PSPOLL); +} + +static inline bool +rt2x00_has_cap_pre_tbtt_interrupt(struct rt2x00_dev *rt2x00dev) +{ + return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_PRE_TBTT_INTERRUPT); +} + +static inline bool +rt2x00_has_cap_link_tuning(struct rt2x00_dev *rt2x00dev) +{ + return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_LINK_TUNING); +} + +static inline bool +rt2x00_has_cap_frame_type(struct rt2x00_dev *rt2x00dev) +{ + return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_FRAME_TYPE); +} + +static inline bool +rt2x00_has_cap_rf_sequence(struct rt2x00_dev *rt2x00dev) +{ + return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_RF_SEQUENCE); +} + +static inline bool +rt2x00_has_cap_external_lna_a(struct rt2x00_dev *rt2x00dev) +{ + return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_EXTERNAL_LNA_A); +} + +static inline bool +rt2x00_has_cap_external_lna_bg(struct rt2x00_dev *rt2x00dev) +{ + return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_EXTERNAL_LNA_BG); +} + +static inline bool +rt2x00_has_cap_double_antenna(struct rt2x00_dev *rt2x00dev) +{ + return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_DOUBLE_ANTENNA); +} + +static inline bool +rt2x00_has_cap_bt_coexist(struct rt2x00_dev *rt2x00dev) +{ + return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_BT_COEXIST); +} + +static inline bool +rt2x00_has_cap_vco_recalibration(struct rt2x00_dev *rt2x00dev) +{ + return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_VCO_RECALIBRATION); +} + /** * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes. * @entry: Pointer to &struct queue_entry From 7b8a00dc571417c845aac8feb2f8e01ce96213bf Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Fri, 11 Oct 2013 13:18:41 +0200 Subject: [PATCH 44/61] rt2x00: rt2x00lib: use rt2x00_has_cap_* helpers Use the appropriate helper functions instead of directly accessing the rt2x00dev->cap_flags field to check device capability flags. This improves readability of the code a bit. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00crypto.c | 4 ++-- drivers/net/wireless/rt2x00/rt2x00debug.c | 2 +- drivers/net/wireless/rt2x00/rt2x00dev.c | 8 ++++---- drivers/net/wireless/rt2x00/rt2x00link.c | 4 ++-- drivers/net/wireless/rt2x00/rt2x00mac.c | 6 +++--- drivers/net/wireless/rt2x00/rt2x00queue.c | 2 +- 6 files changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c index 1ca4c7ffc189..3db0d99d9da7 100644 --- a/drivers/net/wireless/rt2x00/rt2x00crypto.c +++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c @@ -52,7 +52,7 @@ void rt2x00crypto_create_tx_descriptor(struct rt2x00_dev *rt2x00dev, struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_key_conf *hw_key = tx_info->control.hw_key; - if (!test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags) || !hw_key) + if (!rt2x00_has_cap_hw_crypto(rt2x00dev) || !hw_key) return; __set_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags); @@ -80,7 +80,7 @@ unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev, struct ieee80211_key_conf *key = tx_info->control.hw_key; unsigned int overhead = 0; - if (!test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags) || !key) + if (!rt2x00_has_cap_hw_crypto(rt2x00dev) || !key) return overhead; /* diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index fe7a7f63a9ed..7f7baae5ae02 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -750,7 +750,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) intf, &rt2x00debug_fop_queue_stats); #ifdef CONFIG_RT2X00_LIB_CRYPTO - if (test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_hw_crypto(rt2x00dev)) intf->crypto_stats_entry = debugfs_create_file("crypto", S_IRUGO, intf->queue_folder, intf, &rt2x00debug_fop_crypto_stats); diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 712eea9d398f..080b1fcae5fa 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -88,7 +88,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) rt2x00queue_start_queues(rt2x00dev); rt2x00link_start_tuner(rt2x00dev); rt2x00link_start_agc(rt2x00dev); - if (test_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_vco_recalibration(rt2x00dev)) rt2x00link_start_vcocal(rt2x00dev); /* @@ -113,7 +113,7 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev) * Stop all queues */ rt2x00link_stop_agc(rt2x00dev); - if (test_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_vco_recalibration(rt2x00dev)) rt2x00link_stop_vcocal(rt2x00dev); rt2x00link_stop_tuner(rt2x00dev); rt2x00queue_stop_queues(rt2x00dev); @@ -234,7 +234,7 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) * here as they will fetch the next beacon directly prior to * transmission. */ - if (test_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_pre_tbtt_interrupt(rt2x00dev)) return; /* fetch next beacon */ @@ -358,7 +358,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, * mac80211 will expect the same data to be present it the * frame as it was passed to us. */ - if (test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_hw_crypto(rt2x00dev)) rt2x00crypto_tx_insert_iv(entry->skb, header_length); /* diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c index a0e3c021c128..c2b3b6629188 100644 --- a/drivers/net/wireless/rt2x00/rt2x00link.c +++ b/drivers/net/wireless/rt2x00/rt2x00link.c @@ -353,7 +353,7 @@ static void rt2x00link_tuner(struct work_struct *work) * do not support link tuning at all, while other devices can disable * the feature from the EEPROM. */ - if (test_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_link_tuning(rt2x00dev)) rt2x00dev->ops->lib->link_tuner(rt2x00dev, qual, link->count); /* @@ -493,7 +493,7 @@ static void rt2x00link_vcocal(struct work_struct *work) void rt2x00link_register(struct rt2x00_dev *rt2x00dev) { INIT_DELAYED_WORK(&rt2x00dev->link.agc_work, rt2x00link_agc); - if (test_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_vco_recalibration(rt2x00dev)) INIT_DELAYED_WORK(&rt2x00dev->link.vco_work, rt2x00link_vcocal); INIT_DELAYED_WORK(&rt2x00dev->link.watchdog_work, rt2x00link_watchdog); INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00link_tuner); diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index f883802f3505..51f17cfb93f9 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -382,11 +382,11 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw, * of different types, but has no a separate filter for PS Poll frames, * FIF_CONTROL flag implies FIF_PSPOLL. */ - if (!test_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags)) { + if (!rt2x00_has_cap_control_filters(rt2x00dev)) { if (*total_flags & FIF_CONTROL || *total_flags & FIF_PSPOLL) *total_flags |= FIF_CONTROL | FIF_PSPOLL; } - if (!test_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags)) { + if (!rt2x00_has_cap_control_filter_pspoll(rt2x00dev)) { if (*total_flags & FIF_CONTROL) *total_flags |= FIF_PSPOLL; } @@ -469,7 +469,7 @@ int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) return 0; - if (!test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags)) + if (!rt2x00_has_cap_hw_crypto(rt2x00dev)) return -EOPNOTSUPP; /* diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 218e3206ce1b..50590b1420a5 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -61,7 +61,7 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct queue_entry *entry, gfp_t gfp) * at least 8 bytes bytes available in headroom for IV/EIV * and 8 bytes for ICV data as tailroon. */ - if (test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_hw_crypto(rt2x00dev)) { head_size += 8; tail_size += 8; } From c429dfef7041417515ffef5b7f619f5b24b16188 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Fri, 11 Oct 2013 13:18:42 +0200 Subject: [PATCH 45/61] rt2x00: rt2800lib: use rt2x00_has_cap_* helpers Use the appropriate helper functions instead of directly accessing the rt2x00dev->cap_flags field to check device capability flags. This improves readability of the code a bit. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index a114cab413e9..78b31e308060 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1780,7 +1780,7 @@ void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant) rt2800_bbp_read(rt2x00dev, 3, &r3); if (rt2x00_rt(rt2x00dev, RT3572) && - test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) + rt2x00_has_cap_bt_coexist(rt2x00dev)) rt2800_config_3572bt_ant(rt2x00dev); /* @@ -1792,7 +1792,7 @@ void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant) break; case 2: if (rt2x00_rt(rt2x00dev, RT3572) && - test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) + rt2x00_has_cap_bt_coexist(rt2x00dev)) rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 1); else rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); @@ -1822,7 +1822,7 @@ void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant) break; case 2: if (rt2x00_rt(rt2x00dev, RT3572) && - test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) { + rt2x00_has_cap_bt_coexist(rt2x00dev)) { rt2x00_set_field8(&r3, BBP3_RX_ADC, 1); rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, rt2x00dev->curr_band == IEEE80211_BAND_5GHZ); @@ -2131,7 +2131,7 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0); rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0); rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0); - if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_bt_coexist(rt2x00dev)) { if (rf->channel <= 14) { rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1); rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1); @@ -2664,7 +2664,7 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev, if (rf->channel <= 14) { int idx = rf->channel-1; - if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_bt_coexist(rt2x00dev)) { if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) { /* r55/r59 value array of channel 1~14 */ static const char r55_bt_rev[] = {0x83, 0x83, @@ -3210,8 +3210,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, if (rf->channel <= 14) { if (!rt2x00_rt(rt2x00dev, RT5390) && !rt2x00_rt(rt2x00dev, RT5392)) { - if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, - &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { rt2800_bbp_write(rt2x00dev, 82, 0x62); rt2800_bbp_write(rt2x00dev, 75, 0x46); } else { @@ -3236,7 +3235,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, if (rt2x00_rt(rt2x00dev, RT3593)) rt2800_bbp_write(rt2x00dev, 83, 0x9a); - if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_external_lna_a(rt2x00dev)) rt2800_bbp_write(rt2x00dev, 75, 0x46); else rt2800_bbp_write(rt2x00dev, 75, 0x50); @@ -3272,7 +3271,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, /* Turn on primary PAs */ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14); - if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_bt_coexist(rt2x00dev)) rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1); else rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, @@ -3574,7 +3573,7 @@ static int rt2800_get_txpower_reg_delta(struct rt2x00_dev *rt2x00dev, { int delta; - if (test_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_power_limit(rt2x00dev)) return 0; /* @@ -3603,7 +3602,7 @@ static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b, if (rt2x00_rt(rt2x00dev, RT3593)) return min_t(u8, txpower, 0xc); - if (test_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_power_limit(rt2x00dev)) { /* * Check if eirp txpower exceed txpower_limit. * We use OFDM 6M as criterion and its eirp txpower @@ -5524,7 +5523,7 @@ static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev) ant = (div_mode == 3) ? 1 : 0; /* check if this is a Bluetooth combo card */ - if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_bt_coexist(rt2x00dev)) { u32 reg; rt2800_register_read(rt2x00dev, GPIO_CTRL, ®); @@ -5833,7 +5832,7 @@ static void rt2800_normal_mode_setup_3xxx(struct rt2x00_dev *rt2x00dev) rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) || rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) || rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) { - if (!test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags)) + if (!rt2x00_has_cap_external_lna_bg(rt2x00dev)) rt2x00_set_field8(&rfcsr, RFCSR17_R, 1); } From f3218beef6e21769df6ead91717be9f3986668a4 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Fri, 11 Oct 2013 13:18:43 +0200 Subject: [PATCH 46/61] rt2x00: rt61pci: use rt2x00_has_cap_* helpers Use the appropriate helper functions instead of directly accessing the rt2x00dev->cap_flags field to check device capability flags. This improves readability of the code a bit. Compile tested only. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt61pci.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 54d3ddfc9888..a5b69cb49012 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -685,7 +685,7 @@ static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, rt2x00_rf(rt2x00dev, RF2529)); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, - !test_bit(CAPABILITY_FRAME_TYPE, &rt2x00dev->cap_flags)); + !rt2x00_has_cap_frame_type(rt2x00dev)); /* * Configure the RX antenna. @@ -813,10 +813,10 @@ static void rt61pci_config_ant(struct rt2x00_dev *rt2x00dev, if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { sel = antenna_sel_a; - lna = test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags); + lna = rt2x00_has_cap_external_lna_a(rt2x00dev); } else { sel = antenna_sel_bg; - lna = test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags); + lna = rt2x00_has_cap_external_lna_bg(rt2x00dev); } for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++) @@ -836,7 +836,7 @@ static void rt61pci_config_ant(struct rt2x00_dev *rt2x00dev, else if (rt2x00_rf(rt2x00dev, RF2527)) rt61pci_config_antenna_2x(rt2x00dev, ant); else if (rt2x00_rf(rt2x00dev, RF2529)) { - if (test_bit(CAPABILITY_DOUBLE_ANTENNA, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_double_antenna(rt2x00dev)) rt61pci_config_antenna_2x(rt2x00dev, ant); else rt61pci_config_antenna_2529(rt2x00dev, ant); @@ -850,13 +850,13 @@ static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev, short lna_gain = 0; if (libconf->conf->chandef.chan->band == IEEE80211_BAND_2GHZ) { - if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) lna_gain += 14; rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); } else { - if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_external_lna_a(rt2x00dev)) lna_gain += 14; rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); @@ -1054,14 +1054,14 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev, if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { low_bound = 0x28; up_bound = 0x48; - if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_external_lna_a(rt2x00dev)) { low_bound += 0x10; up_bound += 0x10; } } else { low_bound = 0x20; up_bound = 0x40; - if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { low_bound += 0x10; up_bound += 0x10; } @@ -2578,7 +2578,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * eeprom word. */ if (rt2x00_rf(rt2x00dev, RF2529) && - !test_bit(CAPABILITY_DOUBLE_ANTENNA, &rt2x00dev->cap_flags)) { + !rt2x00_has_cap_double_antenna(rt2x00dev)) { rt2x00dev->default_ant.rx = ANTENNA_A + rt2x00_get_field16(eeprom, EEPROM_NIC_RX_FIXED); rt2x00dev->default_ant.tx = @@ -2793,7 +2793,7 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) spec->supported_bands = SUPPORT_BAND_2GHZ; spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - if (!test_bit(CAPABILITY_RF_SEQUENCE, &rt2x00dev->cap_flags)) { + if (!rt2x00_has_cap_rf_sequence(rt2x00dev)) { spec->num_channels = 14; spec->channels = rf_vals_noseq; } else { From 7e43f3b066a26ac1b9c998f28d33e9f70d845033 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Fri, 11 Oct 2013 13:18:44 +0200 Subject: [PATCH 47/61] rt2x00: rt73usb: use rt2x00_has_cap_* helpers Use the appropriate helper functions instead of directly accessing the rt2x00dev->cap_flags field to check device capability flags. This improves readability of the code a bit. Compile tested only. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt73usb.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 1d3880e09a13..1baf9c896dcd 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -595,8 +595,8 @@ static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev, switch (ant->rx) { case ANTENNA_HW_DIVERSITY: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2); - temp = !test_bit(CAPABILITY_FRAME_TYPE, &rt2x00dev->cap_flags) - && (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ); + temp = !rt2x00_has_cap_frame_type(rt2x00dev) && + (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, temp); break; case ANTENNA_A: @@ -636,7 +636,7 @@ static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, - !test_bit(CAPABILITY_FRAME_TYPE, &rt2x00dev->cap_flags)); + !rt2x00_has_cap_frame_type(rt2x00dev)); /* * Configure the RX antenna. @@ -709,10 +709,10 @@ static void rt73usb_config_ant(struct rt2x00_dev *rt2x00dev, if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { sel = antenna_sel_a; - lna = test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags); + lna = rt2x00_has_cap_external_lna_a(rt2x00dev); } else { sel = antenna_sel_bg; - lna = test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags); + lna = rt2x00_has_cap_external_lna_bg(rt2x00dev); } for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++) @@ -740,7 +740,7 @@ static void rt73usb_config_lna_gain(struct rt2x00_dev *rt2x00dev, short lna_gain = 0; if (libconf->conf->chandef.chan->band == IEEE80211_BAND_2GHZ) { - if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) lna_gain += 14; rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); @@ -930,7 +930,7 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev, low_bound = 0x28; up_bound = 0x48; - if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_external_lna_a(rt2x00dev)) { low_bound += 0x10; up_bound += 0x10; } @@ -946,7 +946,7 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev, up_bound = 0x1c; } - if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { low_bound += 0x14; up_bound += 0x10; } @@ -1661,7 +1661,7 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) } if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { - if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_external_lna_a(rt2x00dev)) { if (lna == 3 || lna == 2) offset += 10; } else { From 50d60c6322f14e32bc11635732c54db1447fd3f5 Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Fri, 11 Oct 2013 23:30:26 +0800 Subject: [PATCH 48/61] wcn36xx: fix coccinelle warnings drivers/net/wireless/ath/wcn36xx/debug.c:27:11-31: WARNING opportunity for simple_open, see also structure on line 106 /c/kernel-tests/src/i386/drivers/net/wireless/ath/wcn36xx/debug.c:27:11-31: WARNING opportunity for simple_open, see also structure on line 148 This removes an open coded simple_open() function and replaces file operations references to the function with simple_open() instead. Generated by: coccinelle/api/simple_open.cocci CC: Eugene Krasnikov CC: John W. Linville Signed-off-by: Fengguang Wu Signed-off-by: John W. Linville --- drivers/net/wireless/ath/wcn36xx/debug.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/ath/wcn36xx/debug.c b/drivers/net/wireless/ath/wcn36xx/debug.c index 682bcd650f70..5b84f7ae0b1e 100644 --- a/drivers/net/wireless/ath/wcn36xx/debug.c +++ b/drivers/net/wireless/ath/wcn36xx/debug.c @@ -24,13 +24,6 @@ #ifdef CONFIG_WCN36XX_DEBUGFS -static int wcn36xx_debugfs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - - return 0; -} - static ssize_t read_file_bool_bmps(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { @@ -103,7 +96,7 @@ static ssize_t write_file_bool_bmps(struct file *file, } static const struct file_operations fops_wcn36xx_bmps = { - .open = wcn36xx_debugfs_open, + .open = simple_open, .read = read_file_bool_bmps, .write = write_file_bool_bmps, }; @@ -145,7 +138,7 @@ static ssize_t write_file_dump(struct file *file, } static const struct file_operations fops_wcn36xx_dump = { - .open = wcn36xx_debugfs_open, + .open = simple_open, .write = write_file_dump, }; From 1a04d59d3ec982689552077172893b6836def984 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 11 Oct 2013 23:30:52 +0200 Subject: [PATCH 49/61] ath9k: use a separate data structure for rx buffers There's no shared code for handling both rx and tx buffers, and tx buffers require a lot more metadata than rx buffers. Using a separate data structure for rx reduces memory usage and improves cache footprint. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 10 +++- drivers/net/wireless/ath/ath9k/init.c | 80 ++++++++++++++++++-------- drivers/net/wireless/ath/ath9k/recv.c | 48 ++++++++-------- 3 files changed, 90 insertions(+), 48 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 8878f2dada2d..83c045549db4 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -207,6 +207,14 @@ struct ath_frame_info { u8 baw_tracked : 1; }; +struct ath_rxbuf { + struct list_head list; + struct sk_buff *bf_mpdu; + void *bf_desc; + dma_addr_t bf_daddr; + dma_addr_t bf_buf_addr; +}; + struct ath_buf_state { u8 bf_type; u8 bfs_paprd; @@ -307,7 +315,7 @@ struct ath_rx { struct ath_descdma rxdma; struct ath_rx_edma rx_edma[ATH9K_RX_QUEUE_MAX]; - struct ath_buf *buf_hold; + struct ath_rxbuf *buf_hold; struct sk_buff *frag; u32 ampdu_ref; diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index e3d11c41a145..2306f5788675 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -347,7 +347,6 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, { struct ath_common *common = ath9k_hw_common(sc->sc_ah); u8 *ds; - struct ath_buf *bf; int i, bsize, desc_len; ath_dbg(common, CONFIG, "%s DMA: %u buffers %u desc/buf\n", @@ -399,33 +398,68 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len); /* allocate buffers */ - bsize = sizeof(struct ath_buf) * nbuf; - bf = devm_kzalloc(sc->dev, bsize, GFP_KERNEL); - if (!bf) - return -ENOMEM; + if (is_tx) { + struct ath_buf *bf; - for (i = 0; i < nbuf; i++, bf++, ds += (desc_len * ndesc)) { - bf->bf_desc = ds; - bf->bf_daddr = DS2PHYS(dd, ds); + bsize = sizeof(struct ath_buf) * nbuf; + bf = devm_kzalloc(sc->dev, bsize, GFP_KERNEL); + if (!bf) + return -ENOMEM; - if (!(sc->sc_ah->caps.hw_caps & - ATH9K_HW_CAP_4KB_SPLITTRANS)) { - /* - * Skip descriptor addresses which can cause 4KB - * boundary crossing (addr + length) with a 32 dword - * descriptor fetch. - */ - while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) { - BUG_ON((caddr_t) bf->bf_desc >= - ((caddr_t) dd->dd_desc + - dd->dd_desc_len)); + for (i = 0; i < nbuf; i++, bf++, ds += (desc_len * ndesc)) { + bf->bf_desc = ds; + bf->bf_daddr = DS2PHYS(dd, ds); - ds += (desc_len * ndesc); - bf->bf_desc = ds; - bf->bf_daddr = DS2PHYS(dd, ds); + if (!(sc->sc_ah->caps.hw_caps & + ATH9K_HW_CAP_4KB_SPLITTRANS)) { + /* + * Skip descriptor addresses which can cause 4KB + * boundary crossing (addr + length) with a 32 dword + * descriptor fetch. + */ + while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) { + BUG_ON((caddr_t) bf->bf_desc >= + ((caddr_t) dd->dd_desc + + dd->dd_desc_len)); + + ds += (desc_len * ndesc); + bf->bf_desc = ds; + bf->bf_daddr = DS2PHYS(dd, ds); + } } + list_add_tail(&bf->list, head); + } + } else { + struct ath_rxbuf *bf; + + bsize = sizeof(struct ath_rxbuf) * nbuf; + bf = devm_kzalloc(sc->dev, bsize, GFP_KERNEL); + if (!bf) + return -ENOMEM; + + for (i = 0; i < nbuf; i++, bf++, ds += (desc_len * ndesc)) { + bf->bf_desc = ds; + bf->bf_daddr = DS2PHYS(dd, ds); + + if (!(sc->sc_ah->caps.hw_caps & + ATH9K_HW_CAP_4KB_SPLITTRANS)) { + /* + * Skip descriptor addresses which can cause 4KB + * boundary crossing (addr + length) with a 32 dword + * descriptor fetch. + */ + while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) { + BUG_ON((caddr_t) bf->bf_desc >= + ((caddr_t) dd->dd_desc + + dd->dd_desc_len)); + + ds += (desc_len * ndesc); + bf->bf_desc = ds; + bf->bf_daddr = DS2PHYS(dd, ds); + } + } + list_add_tail(&bf->list, head); } - list_add_tail(&bf->list, head); } return 0; } diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 4ee472a5a4e4..a05164166de8 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -19,7 +19,7 @@ #include "ath9k.h" #include "ar9003_mac.h" -#define SKB_CB_ATHBUF(__skb) (*((struct ath_buf **)__skb->cb)) +#define SKB_CB_ATHBUF(__skb) (*((struct ath_rxbuf **)__skb->cb)) static inline bool ath9k_check_auto_sleep(struct ath_softc *sc) { @@ -35,7 +35,7 @@ static inline bool ath9k_check_auto_sleep(struct ath_softc *sc) * buffer (or rx fifo). This can incorrectly acknowledge packets * to a sender if last desc is self-linked. */ -static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) +static void ath_rx_buf_link(struct ath_softc *sc, struct ath_rxbuf *bf) { struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); @@ -68,7 +68,7 @@ static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) sc->rx.rxlink = &ds->ds_link; } -static void ath_rx_buf_relink(struct ath_softc *sc, struct ath_buf *bf) +static void ath_rx_buf_relink(struct ath_softc *sc, struct ath_rxbuf *bf) { if (sc->rx.buf_hold) ath_rx_buf_link(sc, sc->rx.buf_hold); @@ -112,13 +112,13 @@ static bool ath_rx_edma_buf_link(struct ath_softc *sc, struct ath_hw *ah = sc->sc_ah; struct ath_rx_edma *rx_edma; struct sk_buff *skb; - struct ath_buf *bf; + struct ath_rxbuf *bf; rx_edma = &sc->rx.rx_edma[qtype]; if (skb_queue_len(&rx_edma->rx_fifo) >= rx_edma->rx_fifo_hwsize) return false; - bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list); + bf = list_first_entry(&sc->rx.rxbuf, struct ath_rxbuf, list); list_del_init(&bf->list); skb = bf->bf_mpdu; @@ -138,7 +138,7 @@ static void ath_rx_addbuffer_edma(struct ath_softc *sc, enum ath9k_rx_qtype qtype) { struct ath_common *common = ath9k_hw_common(sc->sc_ah); - struct ath_buf *bf, *tbf; + struct ath_rxbuf *bf, *tbf; if (list_empty(&sc->rx.rxbuf)) { ath_dbg(common, QUEUE, "No free rx buf available\n"); @@ -154,7 +154,7 @@ static void ath_rx_addbuffer_edma(struct ath_softc *sc, static void ath_rx_remove_buffer(struct ath_softc *sc, enum ath9k_rx_qtype qtype) { - struct ath_buf *bf; + struct ath_rxbuf *bf; struct ath_rx_edma *rx_edma; struct sk_buff *skb; @@ -171,7 +171,7 @@ static void ath_rx_edma_cleanup(struct ath_softc *sc) { struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); - struct ath_buf *bf; + struct ath_rxbuf *bf; ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_LP); ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_HP); @@ -199,7 +199,7 @@ static int ath_rx_edma_init(struct ath_softc *sc, int nbufs) struct ath_common *common = ath9k_hw_common(sc->sc_ah); struct ath_hw *ah = sc->sc_ah; struct sk_buff *skb; - struct ath_buf *bf; + struct ath_rxbuf *bf; int error = 0, i; u32 size; @@ -211,7 +211,7 @@ static int ath_rx_edma_init(struct ath_softc *sc, int nbufs) ath_rx_edma_init_queue(&sc->rx.rx_edma[ATH9K_RX_QUEUE_HP], ah->caps.rx_hp_qdepth); - size = sizeof(struct ath_buf) * nbufs; + size = sizeof(struct ath_rxbuf) * nbufs; bf = devm_kzalloc(sc->dev, size, GFP_KERNEL); if (!bf) return -ENOMEM; @@ -271,7 +271,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) { struct ath_common *common = ath9k_hw_common(sc->sc_ah); struct sk_buff *skb; - struct ath_buf *bf; + struct ath_rxbuf *bf; int error = 0; spin_lock_init(&sc->sc_pcu_lock); @@ -332,7 +332,7 @@ void ath_rx_cleanup(struct ath_softc *sc) struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); struct sk_buff *skb; - struct ath_buf *bf; + struct ath_rxbuf *bf; if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) { ath_rx_edma_cleanup(sc); @@ -427,7 +427,7 @@ u32 ath_calcrxfilter(struct ath_softc *sc) int ath_startrecv(struct ath_softc *sc) { struct ath_hw *ah = sc->sc_ah; - struct ath_buf *bf, *tbf; + struct ath_rxbuf *bf, *tbf; if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) { ath_edma_start_recv(sc); @@ -447,7 +447,7 @@ int ath_startrecv(struct ath_softc *sc) if (list_empty(&sc->rx.rxbuf)) goto start_recv; - bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list); + bf = list_first_entry(&sc->rx.rxbuf, struct ath_rxbuf, list); ath9k_hw_putrxbuf(ah, bf->bf_daddr); ath9k_hw_rxena(ah); @@ -603,13 +603,13 @@ static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb, bool mybeacon) static bool ath_edma_get_buffers(struct ath_softc *sc, enum ath9k_rx_qtype qtype, struct ath_rx_status *rs, - struct ath_buf **dest) + struct ath_rxbuf **dest) { struct ath_rx_edma *rx_edma = &sc->rx.rx_edma[qtype]; struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); struct sk_buff *skb; - struct ath_buf *bf; + struct ath_rxbuf *bf; int ret; skb = skb_peek(&rx_edma->rx_fifo); @@ -653,11 +653,11 @@ static bool ath_edma_get_buffers(struct ath_softc *sc, return true; } -static struct ath_buf *ath_edma_get_next_rx_buf(struct ath_softc *sc, +static struct ath_rxbuf *ath_edma_get_next_rx_buf(struct ath_softc *sc, struct ath_rx_status *rs, enum ath9k_rx_qtype qtype) { - struct ath_buf *bf = NULL; + struct ath_rxbuf *bf = NULL; while (ath_edma_get_buffers(sc, qtype, rs, &bf)) { if (!bf) @@ -668,13 +668,13 @@ static struct ath_buf *ath_edma_get_next_rx_buf(struct ath_softc *sc, return NULL; } -static struct ath_buf *ath_get_next_rx_buf(struct ath_softc *sc, +static struct ath_rxbuf *ath_get_next_rx_buf(struct ath_softc *sc, struct ath_rx_status *rs) { struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); struct ath_desc *ds; - struct ath_buf *bf; + struct ath_rxbuf *bf; int ret; if (list_empty(&sc->rx.rxbuf)) { @@ -682,7 +682,7 @@ static struct ath_buf *ath_get_next_rx_buf(struct ath_softc *sc, return NULL; } - bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list); + bf = list_first_entry(&sc->rx.rxbuf, struct ath_rxbuf, list); if (bf == sc->rx.buf_hold) return NULL; @@ -702,7 +702,7 @@ static struct ath_buf *ath_get_next_rx_buf(struct ath_softc *sc, ret = ath9k_hw_rxprocdesc(ah, ds, rs); if (ret == -EINPROGRESS) { struct ath_rx_status trs; - struct ath_buf *tbf; + struct ath_rxbuf *tbf; struct ath_desc *tds; memset(&trs, 0, sizeof(trs)); @@ -711,7 +711,7 @@ static struct ath_buf *ath_get_next_rx_buf(struct ath_softc *sc, return NULL; } - tbf = list_entry(bf->list.next, struct ath_buf, list); + tbf = list_entry(bf->list.next, struct ath_rxbuf, list); /* * On some hardware the descriptor status words could @@ -1315,7 +1315,7 @@ static void ath9k_apply_ampdu_details(struct ath_softc *sc, int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) { - struct ath_buf *bf; + struct ath_rxbuf *bf; struct sk_buff *skb = NULL, *requeue_skb, *hdr_skb; struct ieee80211_rx_status *rxs; struct ath_hw *ah = sc->sc_ah; From 8896934c168474079ba1e81cf3f0c4a975b30406 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 11 Oct 2013 23:30:53 +0200 Subject: [PATCH 50/61] ath9k_hw: remove direct accesses to channel mode flags Use wrappers where available. Simplifies code and helps with further improvements to the channel data structure Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ani.c | 6 +- drivers/net/wireless/ath/ath9k/ar5008_phy.c | 35 ++---- drivers/net/wireless/ath/ath9k/ar9002_hw.c | 26 +---- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 107 ++++-------------- drivers/net/wireless/ath/ath9k/htc_drv_main.c | 26 +---- drivers/net/wireless/ath/ath9k/hw.c | 7 +- drivers/net/wireless/ath/ath9k/hw.h | 2 + drivers/net/wireless/ath/ath9k/mci.c | 8 +- drivers/net/wireless/ath/ath9k/xmit.c | 3 +- 9 files changed, 50 insertions(+), 170 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index be466b0ef7a7..d28923b7435b 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -338,10 +338,9 @@ void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning) aniState->cckNoiseImmunityLevel != ATH9K_ANI_CCK_DEF_LEVEL) { ath_dbg(common, ANI, - "Restore defaults: opmode %u chan %d Mhz/0x%x is_scanning=%d ofdm:%d cck:%d\n", + "Restore defaults: opmode %u chan %d Mhz is_scanning=%d ofdm:%d cck:%d\n", ah->opmode, chan->channel, - chan->channelFlags, is_scanning, aniState->ofdmNoiseImmunityLevel, aniState->cckNoiseImmunityLevel); @@ -354,10 +353,9 @@ void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning) * restore historical levels for this channel */ ath_dbg(common, ANI, - "Restore history: opmode %u chan %d Mhz/0x%x is_scanning=%d ofdm:%d cck:%d\n", + "Restore history: opmode %u chan %d Mhz is_scanning=%d ofdm:%d cck:%d\n", ah->opmode, chan->channel, - chan->channelFlags, is_scanning, aniState->ofdmNoiseImmunityLevel, aniState->cckNoiseImmunityLevel); diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index cb6435e7c6f5..2bfa6fbc6bb1 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -666,8 +666,7 @@ static void ar5008_hw_set_channel_regs(struct ath_hw *ah, if (IS_CHAN_HT40(chan)) { phymode |= AR_PHY_FC_DYN2040_EN; - if ((chan->chanmode == CHANNEL_A_HT40PLUS) || - (chan->chanmode == CHANNEL_G_HT40PLUS)) + if (IS_CHAN_HT40PLUS(chan)) phymode |= AR_PHY_FC_DYN2040_PRI_CH; } @@ -691,31 +690,12 @@ static int ar5008_hw_process_ini(struct ath_hw *ah, int i, regWrites = 0; u32 modesIndex, freqIndex; - switch (chan->chanmode) { - case CHANNEL_A: - case CHANNEL_A_HT20: - modesIndex = 1; + if (IS_CHAN_5GHZ(chan)) { freqIndex = 1; - break; - case CHANNEL_A_HT40PLUS: - case CHANNEL_A_HT40MINUS: - modesIndex = 2; - freqIndex = 1; - break; - case CHANNEL_G: - case CHANNEL_G_HT20: - case CHANNEL_B: - modesIndex = 4; + modesIndex = IS_CHAN_HT40(chan) ? 2 : 1; + } else { freqIndex = 2; - break; - case CHANNEL_G_HT40PLUS: - case CHANNEL_G_HT40MINUS: - modesIndex = 3; - freqIndex = 2; - break; - - default: - return -EINVAL; + modesIndex = IS_CHAN_HT40(chan) ? 3 : 4; } /* @@ -1218,12 +1198,11 @@ static void ar5008_hw_ani_cache_ini_regs(struct ath_hw *ah) iniDef = &aniState->iniDef; - ath_dbg(common, ANI, "ver %d.%d opmode %u chan %d Mhz/0x%x\n", + ath_dbg(common, ANI, "ver %d.%d opmode %u chan %d Mhz\n", ah->hw_version.macVersion, ah->hw_version.macRev, ah->opmode, - chan->channel, - chan->channelFlags); + chan->channel); val = REG_READ(ah, AR_PHY_SFCORR); iniDef->m1Thresh = MS(val, AR_PHY_SFCORR_M1_THRESH); diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c index fb61b081d172..5c95fd9e9c9e 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c @@ -419,28 +419,10 @@ void ar9002_hw_load_ani_reg(struct ath_hw *ah, struct ath9k_channel *chan) u32 modesIndex; int i; - switch (chan->chanmode) { - case CHANNEL_A: - case CHANNEL_A_HT20: - modesIndex = 1; - break; - case CHANNEL_A_HT40PLUS: - case CHANNEL_A_HT40MINUS: - modesIndex = 2; - break; - case CHANNEL_G: - case CHANNEL_G_HT20: - case CHANNEL_B: - modesIndex = 4; - break; - case CHANNEL_G_HT40PLUS: - case CHANNEL_G_HT40MINUS: - modesIndex = 3; - break; - - default: - return; - } + if (IS_CHAN_5GHZ(chan)) + modesIndex = IS_CHAN_HT40(chan) ? 2 : 1; + else + modesIndex = IS_CHAN_HT40(chan) ? 3 : 4; ENABLE_REGWRITE_BUFFER(ah); diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 0131ba2f5d51..724984430448 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -551,8 +551,7 @@ static void ar9003_hw_set_channel_regs(struct ath_hw *ah, if (IS_CHAN_HT40(chan)) { phymode |= AR_PHY_GC_DYN2040_EN; /* Configure control (primary) channel at +-10MHz */ - if ((chan->chanmode == CHANNEL_A_HT40PLUS) || - (chan->chanmode == CHANNEL_G_HT40PLUS)) + if (IS_CHAN_HT40PLUS(chan)) phymode |= AR_PHY_GC_DYN2040_PRI_CH; } @@ -682,42 +681,23 @@ static int ar9550_hw_get_modes_txgain_index(struct ath_hw *ah, { int ret; - switch (chan->chanmode) { - case CHANNEL_A: - case CHANNEL_A_HT20: - if (chan->channel <= 5350) - ret = 1; - else if ((chan->channel > 5350) && (chan->channel <= 5600)) - ret = 3; + if (IS_CHAN_2GHZ(chan)) { + if (IS_CHAN_HT40(chan)) + return 7; else - ret = 5; - break; - - case CHANNEL_A_HT40PLUS: - case CHANNEL_A_HT40MINUS: - if (chan->channel <= 5350) - ret = 2; - else if ((chan->channel > 5350) && (chan->channel <= 5600)) - ret = 4; - else - ret = 6; - break; - - case CHANNEL_G: - case CHANNEL_G_HT20: - case CHANNEL_B: - ret = 8; - break; - - case CHANNEL_G_HT40PLUS: - case CHANNEL_G_HT40MINUS: - ret = 7; - break; - - default: - ret = -EINVAL; + return 8; } + if (chan->channel <= 5350) + ret = 1; + else if ((chan->channel > 5350) && (chan->channel <= 5600)) + ret = 3; + else + ret = 5; + + if (IS_CHAN_HT40(chan)) + ret++; + return ret; } @@ -727,28 +707,10 @@ static int ar9003_hw_process_ini(struct ath_hw *ah, unsigned int regWrites = 0, i; u32 modesIndex; - switch (chan->chanmode) { - case CHANNEL_A: - case CHANNEL_A_HT20: - modesIndex = 1; - break; - case CHANNEL_A_HT40PLUS: - case CHANNEL_A_HT40MINUS: - modesIndex = 2; - break; - case CHANNEL_G: - case CHANNEL_G_HT20: - case CHANNEL_B: - modesIndex = 4; - break; - case CHANNEL_G_HT40PLUS: - case CHANNEL_G_HT40MINUS: - modesIndex = 3; - break; - - default: - return -EINVAL; - } + if (IS_CHAN_5GHZ(chan)) + modesIndex = IS_CHAN_HT40(chan) ? 2 : 1; + else + modesIndex = IS_CHAN_HT40(chan) ? 3 : 4; /* * SOC, MAC, BB, RADIO initvals. @@ -1273,12 +1235,11 @@ static void ar9003_hw_ani_cache_ini_regs(struct ath_hw *ah) aniState = &ah->ani; iniDef = &aniState->iniDef; - ath_dbg(common, ANI, "ver %d.%d opmode %u chan %d Mhz/0x%x\n", + ath_dbg(common, ANI, "ver %d.%d opmode %u chan %d Mhz\n", ah->hw_version.macVersion, ah->hw_version.macRev, ah->opmode, - chan->channel, - chan->channelFlags); + chan->channel); val = REG_READ(ah, AR_PHY_SFCORR); iniDef->m1Thresh = MS(val, AR_PHY_SFCORR_M1_THRESH); @@ -1536,28 +1497,10 @@ static int ar9003_hw_fast_chan_change(struct ath_hw *ah, unsigned int regWrites = 0; u32 modesIndex; - switch (chan->chanmode) { - case CHANNEL_A: - case CHANNEL_A_HT20: - modesIndex = 1; - break; - case CHANNEL_A_HT40PLUS: - case CHANNEL_A_HT40MINUS: - modesIndex = 2; - break; - case CHANNEL_G: - case CHANNEL_G_HT20: - case CHANNEL_B: - modesIndex = 4; - break; - case CHANNEL_G_HT40PLUS: - case CHANNEL_G_HT40MINUS: - modesIndex = 3; - break; - - default: - return -EINVAL; - } + if (IS_CHAN_5GHZ(chan)) + modesIndex = IS_CHAN_HT40(chan) ? 2 : 1; + else + modesIndex = IS_CHAN_HT40(chan) ? 3 : 4; if (modesIndex == ah->modes_index) { *ini_reloaded = false; diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index d44258172c0f..fa71af11fc5e 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -24,30 +24,10 @@ static enum htc_phymode ath9k_htc_get_curmode(struct ath9k_htc_priv *priv, struct ath9k_channel *ichan) { - enum htc_phymode mode; + if (IS_CHAN_5GHZ(ichan)) + return HTC_MODE_11NA; - mode = -EINVAL; - - switch (ichan->chanmode) { - case CHANNEL_G: - case CHANNEL_G_HT20: - case CHANNEL_G_HT40PLUS: - case CHANNEL_G_HT40MINUS: - mode = HTC_MODE_11NG; - break; - case CHANNEL_A: - case CHANNEL_A_HT20: - case CHANNEL_A_HT40PLUS: - case CHANNEL_A_HT40MINUS: - mode = HTC_MODE_11NA; - break; - default: - break; - } - - WARN_ON(mode < 0); - - return mode; + return HTC_MODE_11NG; } bool ath9k_htc_setpower(struct ath9k_htc_priv *priv, diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index f11e8389a9be..7c4d600b14db 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -294,8 +294,7 @@ void ath9k_hw_get_channel_centers(struct ath_hw *ah, return; } - if ((chan->chanmode == CHANNEL_A_HT40PLUS) || - (chan->chanmode == CHANNEL_G_HT40PLUS)) { + if (IS_CHAN_HT40PLUS(chan)) { centers->synth_center = chan->channel + HT40_CHANNEL_CENTER_SHIFT; extoff = 1; @@ -1510,9 +1509,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah, int r; if (pCap->hw_caps & ATH9K_HW_CAP_FCC_BAND_SWITCH) { - u32 cur = ah->curchan->channelFlags & (CHANNEL_2GHZ | CHANNEL_5GHZ); - u32 new = chan->channelFlags & (CHANNEL_2GHZ | CHANNEL_5GHZ); - band_switch = (cur != new); + band_switch = IS_CHAN_5GHZ(ah->curchan) != IS_CHAN_5GHZ(chan); mode_diff = (chan->chanmode != ah->curchan->chanmode); } diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 2babf931b459..102b3b6571f3 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -463,6 +463,8 @@ struct ath9k_channel { ((_c)->chanmode == CHANNEL_G_HT40PLUS) || \ ((_c)->chanmode == CHANNEL_G_HT40MINUS)) #define IS_CHAN_HT(_c) (IS_CHAN_HT20((_c)) || IS_CHAN_HT40((_c))) +#define IS_CHAN_HT40PLUS(_c) ((_c)->chanmode & CHANNEL_HT40PLUS) +#define IS_CHAN_HT40MINUS(_c) ((_c)->chanmode & CHANNEL_HT40MINUS) enum ath9k_power_mode { ATH9K_PM_AWAKE = 0, diff --git a/drivers/net/wireless/ath/ath9k/mci.c b/drivers/net/wireless/ath/ath9k/mci.c index 815bee21c19a..0ac1b5f04256 100644 --- a/drivers/net/wireless/ath/ath9k/mci.c +++ b/drivers/net/wireless/ath/ath9k/mci.c @@ -661,9 +661,9 @@ void ath9k_mci_update_wlan_channels(struct ath_softc *sc, bool allow_all) chan_start = wlan_chan - 10; chan_end = wlan_chan + 10; - if (chan->chanmode == CHANNEL_G_HT40PLUS) + if (IS_CHAN_HT40PLUS(chan)) chan_end += 20; - else if (chan->chanmode == CHANNEL_G_HT40MINUS) + else if (IS_CHAN_HT40MINUS(chan)) chan_start -= 20; /* adjust side band */ @@ -707,11 +707,11 @@ void ath9k_mci_set_txpower(struct ath_softc *sc, bool setchannel, if (setchannel) { struct ath9k_hw_cal_data *caldata = &sc->caldata; - if ((caldata->chanmode == CHANNEL_G_HT40PLUS) && + if (IS_CHAN_HT40PLUS(ah->curchan) && (ah->curchan->channel > caldata->channel) && (ah->curchan->channel <= caldata->channel + 20)) return; - if ((caldata->chanmode == CHANNEL_G_HT40MINUS) && + if (IS_CHAN_HT40MINUS(ah->curchan) && (ah->curchan->channel < caldata->channel) && (ah->curchan->channel >= caldata->channel - 20)) return; diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 62c93a655df9..563f8a9819a6 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -2023,8 +2023,7 @@ u8 ath_txchainmask_reduction(struct ath_softc *sc, u8 chainmask, u32 rate) struct ath_hw *ah = sc->sc_ah; struct ath9k_channel *curchan = ah->curchan; - if ((ah->caps.hw_caps & ATH9K_HW_CAP_APM) && - (curchan->channelFlags & CHANNEL_5GHZ) && + if ((ah->caps.hw_caps & ATH9K_HW_CAP_APM) && IS_CHAN_5GHZ(curchan) && (chainmask == 0x7) && (rate < 0x90)) return 0x3; else if (AR_SREV_9462(ah) && ath9k_hw_btcoex_is_enabled(ah) && From 1a5e63265f6dbd616596325d899332ddc506e83e Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 11 Oct 2013 23:30:54 +0200 Subject: [PATCH 51/61] ath9k_hw: remove IS_CHAN_B() Hardware 802.11b-only mode isn't supported by the driver (the device is configured for 802.11n/g instead). Simplify the code by removing checks for it. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar5008_phy.c | 6 ++++-- drivers/net/wireless/ath/ath9k/ar9002_calib.c | 7 ++----- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 6 ++++-- drivers/net/wireless/ath/ath9k/hw.c | 9 ++------- drivers/net/wireless/ath/ath9k/hw.h | 1 - drivers/net/wireless/ath/ath9k/mac.c | 6 +----- 6 files changed, 13 insertions(+), 22 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index 2bfa6fbc6bb1..b197bf2047e7 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -794,8 +794,10 @@ static void ar5008_hw_set_rfmode(struct ath_hw *ah, struct ath9k_channel *chan) if (chan == NULL) return; - rfMode |= (IS_CHAN_B(chan) || IS_CHAN_G(chan)) - ? AR_PHY_MODE_DYNAMIC : AR_PHY_MODE_OFDM; + if (IS_CHAN_2GHZ(chan)) + rfMode |= AR_PHY_MODE_DYNAMIC; + else + rfMode |= AR_PHY_MODE_OFDM; if (!AR_SREV_9280_20_OR_LATER(ah)) rfMode |= (IS_CHAN_5GHZ(chan)) ? diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c index 32376ad74011..cdc74005650c 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c @@ -33,15 +33,12 @@ static bool ar9002_hw_is_cal_supported(struct ath_hw *ah, bool supported = false; switch (ah->supp_cals & cal_type) { case IQ_MISMATCH_CAL: - /* Run IQ Mismatch for non-CCK only */ - if (!IS_CHAN_B(chan)) - supported = true; + supported = true; break; case ADC_GAIN_CAL: case ADC_DC_CAL: /* Run ADC Gain Cal for non-CCK & non 2GHz-HT20 only */ - if (!IS_CHAN_B(chan) && - !((IS_CHAN_2GHZ(chan) || IS_CHAN_A_FAST_CLOCK(ah, chan)) && + if (!((IS_CHAN_2GHZ(chan) || IS_CHAN_A_FAST_CLOCK(ah, chan)) && IS_CHAN_HT20(chan))) supported = true; break; diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 724984430448..312c868f05be 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -808,8 +808,10 @@ static void ar9003_hw_set_rfmode(struct ath_hw *ah, if (chan == NULL) return; - rfMode |= (IS_CHAN_B(chan) || IS_CHAN_G(chan)) - ? AR_PHY_MODE_DYNAMIC : AR_PHY_MODE_OFDM; + if (IS_CHAN_2GHZ(chan)) + rfMode |= AR_PHY_MODE_DYNAMIC; + else + rfMode |= AR_PHY_MODE_OFDM; if (IS_CHAN_A_FAST_CLOCK(ah, chan)) rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE); diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 7c4d600b14db..34c8e2ebb69b 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -190,10 +190,7 @@ EXPORT_SYMBOL(ath9k_hw_wait); void ath9k_hw_synth_delay(struct ath_hw *ah, struct ath9k_channel *chan, int hw_delay) { - if (IS_CHAN_B(chan)) - hw_delay = (4 * hw_delay) / 22; - else - hw_delay /= 10; + hw_delay /= 10; if (IS_CHAN_HALF_RATE(chan)) hw_delay *= 2; @@ -1159,9 +1156,7 @@ u32 ath9k_regd_get_ctl(struct ath_regulatory *reg, struct ath9k_channel *chan) { u32 ctl = ath_regd_get_band_ctl(reg, chan->chan->band); - if (IS_CHAN_B(chan)) - ctl |= CTL_11B; - else if (IS_CHAN_G(chan)) + if (IS_CHAN_G(chan)) ctl |= CTL_11G; else ctl |= CTL_11A; diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 102b3b6571f3..eaaf98ba2509 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -455,7 +455,6 @@ struct ath9k_channel { ((_ah)->caps.hw_caps & ATH9K_HW_CAP_FASTCLOCK)) /* These macros check chanmode and not channelFlags */ -#define IS_CHAN_B(_c) ((_c)->chanmode == CHANNEL_B) #define IS_CHAN_HT20(_c) (((_c)->chanmode == CHANNEL_A_HT20) || \ ((_c)->chanmode == CHANNEL_G_HT20)) #define IS_CHAN_HT40(_c) (((_c)->chanmode == CHANNEL_A_HT40PLUS) || \ diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index a3eff0986a3f..6a18f9d3e9cc 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -374,7 +374,6 @@ EXPORT_SYMBOL(ath9k_hw_releasetxqueue); bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q) { struct ath_common *common = ath9k_hw_common(ah); - struct ath9k_channel *chan = ah->curchan; struct ath9k_tx_queue_info *qi; u32 cwMin, chanCwMin, value; @@ -387,10 +386,7 @@ bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q) ath_dbg(common, QUEUE, "Reset TX queue: %u\n", q); if (qi->tqi_cwmin == ATH9K_TXQ_USEDEFAULT) { - if (chan && IS_CHAN_B(chan)) - chanCwMin = INIT_CWMIN_11B; - else - chanCwMin = INIT_CWMIN; + chanCwMin = INIT_CWMIN; for (cwMin = 1; cwMin < chanCwMin; cwMin = (cwMin << 1) | 1); } else From 81c507a8b09fe00a1b4a2e7e84ba7234b126c332 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 11 Oct 2013 23:30:55 +0200 Subject: [PATCH 52/61] ath9k_hw: remove IS_CHAN_OFDM() The hardware is always configured with OFDM support enabled Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 8 ++------ drivers/net/wireless/ath/ath9k/hw.h | 1 - 2 files changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 34c8e2ebb69b..40a1132910f5 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1544,9 +1544,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah, ath9k_hw_set_clockrate(ah); ath9k_hw_apply_txpower(ah, chan, false); - if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan)) - ath9k_hw_set_delta_slope(ah, chan); - + ath9k_hw_set_delta_slope(ah, chan); ath9k_hw_spur_mitigate_freq(ah, chan); if (band_switch || ini_reloaded) @@ -1981,9 +1979,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, ath9k_hw_init_mfp(ah); - if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan)) - ath9k_hw_set_delta_slope(ah, chan); - + ath9k_hw_set_delta_slope(ah, chan); ath9k_hw_spur_mitigate_freq(ah, chan); ah->eep_ops->set_board_values(ah, chan); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index eaaf98ba2509..0e446939b2d6 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -445,7 +445,6 @@ struct ath9k_channel { (((_c)->channelFlags & CHANNEL_G_HT20) == CHANNEL_G_HT20) || \ (((_c)->channelFlags & CHANNEL_G_HT40PLUS) == CHANNEL_G_HT40PLUS) || \ (((_c)->channelFlags & CHANNEL_G_HT40MINUS) == CHANNEL_G_HT40MINUS)) -#define IS_CHAN_OFDM(_c) (((_c)->channelFlags & CHANNEL_OFDM) != 0) #define IS_CHAN_5GHZ(_c) (((_c)->channelFlags & CHANNEL_5GHZ) != 0) #define IS_CHAN_2GHZ(_c) (((_c)->channelFlags & CHANNEL_2GHZ) != 0) #define IS_CHAN_HALF_RATE(_c) (((_c)->channelFlags & CHANNEL_HALF) != 0) From 6b21fd2027f8deb6fb7d3283b4c2eacabc8eeb95 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 11 Oct 2013 23:30:56 +0200 Subject: [PATCH 53/61] ath9k_hw: simplify channel flags There was some duplication between channelFlags and chanmode, as well as a lot of redundant checks based on the combinations of flags. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/calib.c | 1 - drivers/net/wireless/ath/ath9k/common.c | 73 ++++++---------------- drivers/net/wireless/ath/ath9k/hw.c | 24 +++----- drivers/net/wireless/ath/ath9k/hw.h | 80 ++++++++----------------- 4 files changed, 49 insertions(+), 129 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c index d438a0341e68..fe23026d82cd 100644 --- a/drivers/net/wireless/ath/ath9k/calib.c +++ b/drivers/net/wireless/ath/ath9k/calib.c @@ -408,7 +408,6 @@ void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah, ah->caldata->channel = chan->channel; ah->caldata->channelFlags = chan->channelFlags; - ah->caldata->chanmode = chan->chanmode; h = ah->caldata->nfCalHist; default_nf = ath9k_hw_get_default_nf(ah, chan); for (i = 0; i < NUM_NF_READINGS; i++) { diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c index d3063c21e16c..b5ac26994f19 100644 --- a/drivers/net/wireless/ath/ath9k/common.c +++ b/drivers/net/wireless/ath/ath9k/common.c @@ -49,83 +49,44 @@ int ath9k_cmn_get_hw_crypto_keytype(struct sk_buff *skb) } EXPORT_SYMBOL(ath9k_cmn_get_hw_crypto_keytype); -static u32 ath9k_get_extchanmode(struct cfg80211_chan_def *chandef) -{ - u32 chanmode = 0; - - switch (chandef->chan->band) { - case IEEE80211_BAND_2GHZ: - switch (chandef->width) { - case NL80211_CHAN_WIDTH_20_NOHT: - case NL80211_CHAN_WIDTH_20: - chanmode = CHANNEL_G_HT20; - break; - case NL80211_CHAN_WIDTH_40: - if (chandef->center_freq1 > chandef->chan->center_freq) - chanmode = CHANNEL_G_HT40PLUS; - else - chanmode = CHANNEL_G_HT40MINUS; - break; - default: - break; - } - break; - case IEEE80211_BAND_5GHZ: - switch (chandef->width) { - case NL80211_CHAN_WIDTH_20_NOHT: - case NL80211_CHAN_WIDTH_20: - chanmode = CHANNEL_A_HT20; - break; - case NL80211_CHAN_WIDTH_40: - if (chandef->center_freq1 > chandef->chan->center_freq) - chanmode = CHANNEL_A_HT40PLUS; - else - chanmode = CHANNEL_A_HT40MINUS; - break; - default: - break; - } - break; - default: - break; - } - - return chanmode; -} - /* * Update internal channel flags. */ void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan, struct cfg80211_chan_def *chandef) { - ichan->channel = chandef->chan->center_freq; - ichan->chan = chandef->chan; + struct ieee80211_channel *chan = chandef->chan; + u16 flags = 0; - if (chandef->chan->band == IEEE80211_BAND_2GHZ) { - ichan->chanmode = CHANNEL_G; - ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM; - } else { - ichan->chanmode = CHANNEL_A; - ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM; - } + ichan->channel = chan->center_freq; + ichan->chan = chan; + + if (chan->band == IEEE80211_BAND_5GHZ) + flags |= CHANNEL_5GHZ; switch (chandef->width) { case NL80211_CHAN_WIDTH_5: - ichan->channelFlags |= CHANNEL_QUARTER; + flags |= CHANNEL_QUARTER; break; case NL80211_CHAN_WIDTH_10: - ichan->channelFlags |= CHANNEL_HALF; + flags |= CHANNEL_HALF; break; case NL80211_CHAN_WIDTH_20_NOHT: break; case NL80211_CHAN_WIDTH_20: + flags |= CHANNEL_HT; + break; case NL80211_CHAN_WIDTH_40: - ichan->chanmode = ath9k_get_extchanmode(chandef); + if (chandef->center_freq1 > chandef->chan->center_freq) + flags |= CHANNEL_HT40PLUS | CHANNEL_HT; + else + flags |= CHANNEL_HT40MINUS | CHANNEL_HT; break; default: WARN_ON(1); } + + ichan->channelFlags = flags; } EXPORT_SYMBOL(ath9k_cmn_update_ichannel); diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 40a1132910f5..bc7382fbcf66 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1156,7 +1156,7 @@ u32 ath9k_regd_get_ctl(struct ath_regulatory *reg, struct ath9k_channel *chan) { u32 ctl = ath_regd_get_band_ctl(reg, chan->chan->band); - if (IS_CHAN_G(chan)) + if (IS_CHAN_2GHZ(chan)) ctl |= CTL_11G; else ctl |= CTL_11A; @@ -1505,7 +1505,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah, if (pCap->hw_caps & ATH9K_HW_CAP_FCC_BAND_SWITCH) { band_switch = IS_CHAN_5GHZ(ah->curchan) != IS_CHAN_5GHZ(chan); - mode_diff = (chan->chanmode != ah->curchan->chanmode); + mode_diff = (chan->channelFlags != ah->curchan->channelFlags); } for (qnum = 0; qnum < AR_NUM_QCU; qnum++) { @@ -1814,20 +1814,11 @@ static int ath9k_hw_do_fastcc(struct ath_hw *ah, struct ath9k_channel *chan) goto fail; /* - * If cross-band fcc is not supoprted, bail out if - * either channelFlags or chanmode differ. - * - * chanmode will be different if the HT operating mode - * changes because of CSA. + * If cross-band fcc is not supoprted, bail out if channelFlags differ. */ - if (!(pCap->hw_caps & ATH9K_HW_CAP_FCC_BAND_SWITCH)) { - if ((chan->channelFlags & CHANNEL_ALL) != - (ah->curchan->channelFlags & CHANNEL_ALL)) - goto fail; - - if (chan->chanmode != ah->curchan->chanmode) - goto fail; - } + if (!(pCap->hw_caps & ATH9K_HW_CAP_FCC_BAND_SWITCH) && + chan->channelFlags != ah->curchan->channelFlags) + goto fail; if (!ath9k_hw_check_alive(ah)) goto fail; @@ -1889,8 +1880,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, ah->caldata = caldata; if (caldata && (chan->channel != caldata->channel || - chan->channelFlags != caldata->channelFlags || - chan->chanmode != caldata->chanmode)) { + chan->channelFlags != caldata->channelFlags)) { /* Operating channel changed, reset channel calibration data */ memset(caldata, 0, sizeof(*caldata)); ath9k_init_nfcal_hist_buffer(ah, chan); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 0e446939b2d6..9d04d67843b2 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -369,36 +369,6 @@ enum ath9k_int { ATH9K_INT_NOCARD = 0xffffffff }; -#define CHANNEL_CCK 0x00020 -#define CHANNEL_OFDM 0x00040 -#define CHANNEL_2GHZ 0x00080 -#define CHANNEL_5GHZ 0x00100 -#define CHANNEL_PASSIVE 0x00200 -#define CHANNEL_DYN 0x00400 -#define CHANNEL_HALF 0x04000 -#define CHANNEL_QUARTER 0x08000 -#define CHANNEL_HT20 0x10000 -#define CHANNEL_HT40PLUS 0x20000 -#define CHANNEL_HT40MINUS 0x40000 - -#define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM) -#define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK) -#define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM) -#define CHANNEL_G_HT20 (CHANNEL_2GHZ|CHANNEL_HT20) -#define CHANNEL_A_HT20 (CHANNEL_5GHZ|CHANNEL_HT20) -#define CHANNEL_G_HT40PLUS (CHANNEL_2GHZ|CHANNEL_HT40PLUS) -#define CHANNEL_G_HT40MINUS (CHANNEL_2GHZ|CHANNEL_HT40MINUS) -#define CHANNEL_A_HT40PLUS (CHANNEL_5GHZ|CHANNEL_HT40PLUS) -#define CHANNEL_A_HT40MINUS (CHANNEL_5GHZ|CHANNEL_HT40MINUS) -#define CHANNEL_ALL \ - (CHANNEL_OFDM| \ - CHANNEL_CCK| \ - CHANNEL_2GHZ | \ - CHANNEL_5GHZ | \ - CHANNEL_HT20 | \ - CHANNEL_HT40PLUS | \ - CHANNEL_HT40MINUS) - #define MAX_RTT_TABLE_ENTRY 6 #define MAX_IQCAL_MEASUREMENT 8 #define MAX_CL_TAB_ENTRY 16 @@ -417,8 +387,7 @@ enum ath9k_cal_flags { struct ath9k_hw_cal_data { u16 channel; - u32 channelFlags; - u32 chanmode; + u16 channelFlags; unsigned long cal_flags; int32_t CalValid; int8_t iCoff; @@ -436,33 +405,34 @@ struct ath9k_hw_cal_data { struct ath9k_channel { struct ieee80211_channel *chan; u16 channel; - u32 channelFlags; - u32 chanmode; + u16 channelFlags; s16 noisefloor; }; -#define IS_CHAN_G(_c) ((((_c)->channelFlags & (CHANNEL_G)) == CHANNEL_G) || \ - (((_c)->channelFlags & CHANNEL_G_HT20) == CHANNEL_G_HT20) || \ - (((_c)->channelFlags & CHANNEL_G_HT40PLUS) == CHANNEL_G_HT40PLUS) || \ - (((_c)->channelFlags & CHANNEL_G_HT40MINUS) == CHANNEL_G_HT40MINUS)) -#define IS_CHAN_5GHZ(_c) (((_c)->channelFlags & CHANNEL_5GHZ) != 0) -#define IS_CHAN_2GHZ(_c) (((_c)->channelFlags & CHANNEL_2GHZ) != 0) -#define IS_CHAN_HALF_RATE(_c) (((_c)->channelFlags & CHANNEL_HALF) != 0) -#define IS_CHAN_QUARTER_RATE(_c) (((_c)->channelFlags & CHANNEL_QUARTER) != 0) -#define IS_CHAN_A_FAST_CLOCK(_ah, _c) \ - ((((_c)->channelFlags & CHANNEL_5GHZ) != 0) && \ - ((_ah)->caps.hw_caps & ATH9K_HW_CAP_FASTCLOCK)) +#define CHANNEL_5GHZ BIT(0) +#define CHANNEL_HALF BIT(1) +#define CHANNEL_QUARTER BIT(2) +#define CHANNEL_HT BIT(3) +#define CHANNEL_HT40PLUS BIT(4) +#define CHANNEL_HT40MINUS BIT(5) -/* These macros check chanmode and not channelFlags */ -#define IS_CHAN_HT20(_c) (((_c)->chanmode == CHANNEL_A_HT20) || \ - ((_c)->chanmode == CHANNEL_G_HT20)) -#define IS_CHAN_HT40(_c) (((_c)->chanmode == CHANNEL_A_HT40PLUS) || \ - ((_c)->chanmode == CHANNEL_A_HT40MINUS) || \ - ((_c)->chanmode == CHANNEL_G_HT40PLUS) || \ - ((_c)->chanmode == CHANNEL_G_HT40MINUS)) -#define IS_CHAN_HT(_c) (IS_CHAN_HT20((_c)) || IS_CHAN_HT40((_c))) -#define IS_CHAN_HT40PLUS(_c) ((_c)->chanmode & CHANNEL_HT40PLUS) -#define IS_CHAN_HT40MINUS(_c) ((_c)->chanmode & CHANNEL_HT40MINUS) +#define IS_CHAN_5GHZ(_c) (!!((_c)->channelFlags & CHANNEL_5GHZ)) +#define IS_CHAN_2GHZ(_c) (!IS_CHAN_5GHZ(_c)) + +#define IS_CHAN_HALF_RATE(_c) (!!((_c)->channelFlags & CHANNEL_HALF)) +#define IS_CHAN_QUARTER_RATE(_c) (!!((_c)->channelFlags & CHANNEL_QUARTER)) +#define IS_CHAN_A_FAST_CLOCK(_ah, _c) \ + (IS_CHAN_5GHZ(_c) && ((_ah)->caps.hw_caps & ATH9K_HW_CAP_FASTCLOCK)) + +#define IS_CHAN_HT(_c) ((_c)->channelFlags & CHANNEL_HT) + +#define IS_CHAN_HT20(_c) (IS_CHAN_HT(_c) && !IS_CHAN_HT40(_c)) + +#define IS_CHAN_HT40(_c) \ + (!!((_c)->channelFlags & (CHANNEL_HT40PLUS | CHANNEL_HT40MINUS))) + +#define IS_CHAN_HT40PLUS(_c) ((_c)->channelFlags & CHANNEL_HT40PLUS) +#define IS_CHAN_HT40MINUS(_c) ((_c)->channelFlags & CHANNEL_HT40MINUS) enum ath9k_power_mode { ATH9K_PM_AWAKE = 0, From 2297f1c7beec785e437da3da0157666bca525c99 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 11 Oct 2013 23:30:57 +0200 Subject: [PATCH 54/61] ath9k: make ath9k_cmn_update_ichannel static Rework its wrapper function to make it more generic, using it as a replacement for previous calls to ath9k_cmn_update_ichannel. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/common.c | 16 ++++++++-------- drivers/net/wireless/ath/ath9k/common.h | 7 +++---- drivers/net/wireless/ath/ath9k/htc_drv_main.c | 6 ++---- drivers/net/wireless/ath/ath9k/init.c | 2 +- drivers/net/wireless/ath/ath9k/main.c | 7 +++---- 5 files changed, 17 insertions(+), 21 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c index b5ac26994f19..a7e5a05b2eff 100644 --- a/drivers/net/wireless/ath/ath9k/common.c +++ b/drivers/net/wireless/ath/ath9k/common.c @@ -52,8 +52,8 @@ EXPORT_SYMBOL(ath9k_cmn_get_hw_crypto_keytype); /* * Update internal channel flags. */ -void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan, - struct cfg80211_chan_def *chandef) +static void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan, + struct cfg80211_chan_def *chandef) { struct ieee80211_channel *chan = chandef->chan; u16 flags = 0; @@ -88,25 +88,25 @@ void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan, ichan->channelFlags = flags; } -EXPORT_SYMBOL(ath9k_cmn_update_ichannel); /* * Get the internal channel reference. */ -struct ath9k_channel *ath9k_cmn_get_curchannel(struct ieee80211_hw *hw, - struct ath_hw *ah) +struct ath9k_channel *ath9k_cmn_get_channel(struct ieee80211_hw *hw, + struct ath_hw *ah, + struct cfg80211_chan_def *chandef) { - struct ieee80211_channel *curchan = hw->conf.chandef.chan; + struct ieee80211_channel *curchan = chandef->chan; struct ath9k_channel *channel; u8 chan_idx; chan_idx = curchan->hw_value; channel = &ah->channels[chan_idx]; - ath9k_cmn_update_ichannel(channel, &hw->conf.chandef); + ath9k_cmn_update_ichannel(channel, chandef); return channel; } -EXPORT_SYMBOL(ath9k_cmn_get_curchannel); +EXPORT_SYMBOL(ath9k_cmn_get_channel); int ath9k_cmn_count_streams(unsigned int chainmask, int max) { diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h index e039bcbfbd79..eb85e1bdca88 100644 --- a/drivers/net/wireless/ath/ath9k/common.h +++ b/drivers/net/wireless/ath/ath9k/common.h @@ -43,10 +43,9 @@ (((x) + ((mul)/2)) / (mul)) int ath9k_cmn_get_hw_crypto_keytype(struct sk_buff *skb); -void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan, - struct cfg80211_chan_def *chandef); -struct ath9k_channel *ath9k_cmn_get_curchannel(struct ieee80211_hw *hw, - struct ath_hw *ah); +struct ath9k_channel *ath9k_cmn_get_channel(struct ieee80211_hw *hw, + struct ath_hw *ah, + struct cfg80211_chan_def *chandef); int ath9k_cmn_count_streams(unsigned int chainmask, int max); void ath9k_cmn_btcoex_bt_stomp(struct ath_common *common, enum ath_stomp_type stomp_type); diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index fa71af11fc5e..9a2657fdd9cc 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -906,7 +906,7 @@ static int ath9k_htc_start(struct ieee80211_hw *hw) WMI_CMD(WMI_FLUSH_RECV_CMDID); /* setup initial channel */ - init_channel = ath9k_cmn_get_curchannel(hw, ah); + init_channel = ath9k_cmn_get_channel(hw, ah, &hw->conf.chandef); ret = ath9k_hw_reset(ah, init_channel, ah->caldata, false); if (ret) { @@ -1188,9 +1188,7 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed) ath_dbg(common, CONFIG, "Set channel: %d MHz\n", curchan->center_freq); - ath9k_cmn_update_ichannel(&priv->ah->channels[pos], - &hw->conf.chandef); - + ath9k_cmn_get_channel(hw, priv->ah, &hw->conf.chandef); if (ath9k_htc_set_channel(priv, hw, &priv->ah->channels[pos]) < 0) { ath_err(common, "Unable to set channel\n"); ret = -EINVAL; diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 2306f5788675..9c145faa997d 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -802,7 +802,7 @@ static void ath9k_init_band_txpower(struct ath_softc *sc, int band) chan = &sband->channels[i]; ah->curchan = &ah->channels[chan->hw_value]; cfg80211_chandef_create(&chandef, chan, NL80211_CHAN_HT20); - ath9k_cmn_update_ichannel(ah->curchan, &chandef); + ath9k_cmn_get_channel(sc->hw, ah, &chandef); ath9k_hw_set_txpowerlimit(ah, MAX_RATE_POWER, true); } } diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index cdb3b1e10b95..ecbeccdb60bc 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -601,7 +601,7 @@ static int ath9k_start(struct ieee80211_hw *hw) ath9k_ps_wakeup(sc); mutex_lock(&sc->mutex); - init_channel = ath9k_cmn_get_curchannel(hw, ah); + init_channel = ath9k_cmn_get_channel(hw, ah, &hw->conf.chandef); /* Reset SERDES registers */ ath9k_hw_configpcipowersave(ah, false); @@ -804,7 +804,7 @@ static void ath9k_stop(struct ieee80211_hw *hw) } if (!ah->curchan) - ah->curchan = ath9k_cmn_get_curchannel(hw, ah); + ah->curchan = ath9k_cmn_get_channel(hw, ah, &hw->conf.chandef); ath9k_hw_reset(ah, ah->curchan, ah->caldata, false); ath9k_hw_phy_disable(ah); @@ -1224,8 +1224,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) ath_update_survey_stats(sc); spin_unlock_irqrestore(&common->cc_lock, flags); - ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos], - &conf->chandef); + ath9k_cmn_get_channel(hw, ah, &conf->chandef); /* * If the operating channel changes, change the survey in-use flags From 45c67f6fecd28abdfeca5e6c58d7f5b7278c6362 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 11 Oct 2013 23:30:58 +0200 Subject: [PATCH 55/61] ath9k: move channel change code to ath_set_channel Preparation for adding the scanning state machine to ath9k Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 152 +++++++++++++------------- 1 file changed, 79 insertions(+), 73 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index ecbeccdb60bc..c01831b462a0 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -302,17 +302,91 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan) * by reseting the chip. To accomplish this we must first cleanup any pending * DMA, then restart stuff. */ -static int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, - struct ath9k_channel *hchan) +static int ath_set_channel(struct ath_softc *sc, struct cfg80211_chan_def *chandef) { + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + struct ieee80211_hw *hw = sc->hw; + struct ath9k_channel *hchan; + struct ieee80211_channel *chan = chandef->chan; + unsigned long flags; + bool offchannel; + int pos = chan->hw_value; + int old_pos = -1; int r; if (test_bit(SC_OP_INVALID, &sc->sc_flags)) return -EIO; - r = ath_reset_internal(sc, hchan); + offchannel = !!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL); - return r; + if (ah->curchan) + old_pos = ah->curchan - &ah->channels[0]; + + ath_dbg(common, CONFIG, "Set channel: %d MHz width: %d\n", + chan->center_freq, chandef->width); + + /* update survey stats for the old channel before switching */ + spin_lock_irqsave(&common->cc_lock, flags); + ath_update_survey_stats(sc); + spin_unlock_irqrestore(&common->cc_lock, flags); + + ath9k_cmn_get_channel(hw, ah, chandef); + + /* + * If the operating channel changes, change the survey in-use flags + * along with it. + * Reset the survey data for the new channel, unless we're switching + * back to the operating channel from an off-channel operation. + */ + if (!offchannel && sc->cur_survey != &sc->survey[pos]) { + if (sc->cur_survey) + sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE; + + sc->cur_survey = &sc->survey[pos]; + + memset(sc->cur_survey, 0, sizeof(struct survey_info)); + sc->cur_survey->filled |= SURVEY_INFO_IN_USE; + } else if (!(sc->survey[pos].filled & SURVEY_INFO_IN_USE)) { + memset(&sc->survey[pos], 0, sizeof(struct survey_info)); + } + + hchan = &sc->sc_ah->channels[pos]; + r = ath_reset_internal(sc, hchan); + if (r) + return r; + + /* + * The most recent snapshot of channel->noisefloor for the old + * channel is only available after the hardware reset. Copy it to + * the survey stats now. + */ + if (old_pos >= 0) + ath_update_survey_nf(sc, old_pos); + + /* + * Enable radar pulse detection if on a DFS channel. Spectral + * scanning and radar detection can not be used concurrently. + */ + if (hw->conf.radar_enabled) { + u32 rxfilter; + + /* set HW specific DFS configuration */ + ath9k_hw_set_radar_params(ah); + rxfilter = ath9k_hw_getrxfilter(ah); + rxfilter |= ATH9K_RX_FILTER_PHYRADAR | + ATH9K_RX_FILTER_PHYERR; + ath9k_hw_setrxfilter(ah, rxfilter); + ath_dbg(common, DFS, "DFS enabled at freq %d\n", + chan->center_freq); + } else { + /* perform spectral scan if requested. */ + if (test_bit(SC_OP_SCANNING, &sc->sc_flags) && + sc->spectral_mode == SPECTRAL_CHANSCAN) + ath9k_spectral_scan_trigger(hw); + } + + return 0; } static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta, @@ -1208,80 +1282,12 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) } if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || reset_channel) { - struct ieee80211_channel *curchan = hw->conf.chandef.chan; - int pos = curchan->hw_value; - int old_pos = -1; - unsigned long flags; - - if (ah->curchan) - old_pos = ah->curchan - &ah->channels[0]; - - ath_dbg(common, CONFIG, "Set channel: %d MHz width: %d\n", - curchan->center_freq, hw->conf.chandef.width); - - /* update survey stats for the old channel before switching */ - spin_lock_irqsave(&common->cc_lock, flags); - ath_update_survey_stats(sc); - spin_unlock_irqrestore(&common->cc_lock, flags); - - ath9k_cmn_get_channel(hw, ah, &conf->chandef); - - /* - * If the operating channel changes, change the survey in-use flags - * along with it. - * Reset the survey data for the new channel, unless we're switching - * back to the operating channel from an off-channel operation. - */ - if (!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) && - sc->cur_survey != &sc->survey[pos]) { - - if (sc->cur_survey) - sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE; - - sc->cur_survey = &sc->survey[pos]; - - memset(sc->cur_survey, 0, sizeof(struct survey_info)); - sc->cur_survey->filled |= SURVEY_INFO_IN_USE; - } else if (!(sc->survey[pos].filled & SURVEY_INFO_IN_USE)) { - memset(&sc->survey[pos], 0, sizeof(struct survey_info)); - } - - if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) { + if (ath_set_channel(sc, &hw->conf.chandef) < 0) { ath_err(common, "Unable to set channel\n"); mutex_unlock(&sc->mutex); ath9k_ps_restore(sc); return -EINVAL; } - - /* - * The most recent snapshot of channel->noisefloor for the old - * channel is only available after the hardware reset. Copy it to - * the survey stats now. - */ - if (old_pos >= 0) - ath_update_survey_nf(sc, old_pos); - - /* - * Enable radar pulse detection if on a DFS channel. Spectral - * scanning and radar detection can not be used concurrently. - */ - if (hw->conf.radar_enabled) { - u32 rxfilter; - - /* set HW specific DFS configuration */ - ath9k_hw_set_radar_params(ah); - rxfilter = ath9k_hw_getrxfilter(ah); - rxfilter |= ATH9K_RX_FILTER_PHYRADAR | - ATH9K_RX_FILTER_PHYERR; - ath9k_hw_setrxfilter(ah, rxfilter); - ath_dbg(common, DFS, "DFS enabled at freq %d\n", - curchan->center_freq); - } else { - /* perform spectral scan if requested. */ - if (test_bit(SC_OP_SCANNING, &sc->sc_flags) && - sc->spectral_mode == SPECTRAL_CHANSCAN) - ath9k_spectral_scan_trigger(hw); - } } if (changed & IEEE80211_CONF_CHANGE_POWER) { From 7f329bbb3debf22c272b192d334058554c716d57 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 11 Oct 2013 23:30:59 +0200 Subject: [PATCH 56/61] ath9k: remove sc->config.cabqReadyTime It is not exposed as a configuration option anyway Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/init.c | 1 - drivers/net/wireless/ath/ath9k/mac.h | 2 -- drivers/net/wireless/ath/ath9k/xmit.c | 9 +-------- 4 files changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 83c045549db4..d03b85e57614 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -64,7 +64,6 @@ struct ath_node; struct ath_config { u16 txpowlimit; - u8 cabqReadytime; }; /*************************/ diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 9c145faa997d..7df728f36330 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -471,7 +471,6 @@ static int ath9k_init_queues(struct ath_softc *sc) sc->beacon.beaconq = ath9k_hw_beaconq_setup(sc->sc_ah); sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0); - sc->config.cabqReadytime = ATH_CABQ_READY_TIME; ath_cabq_update(sc); sc->tx.uapsdq = ath_txq_setup(sc, ATH9K_TX_QUEUE_UAPSD, 0); diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h index bfccaceed44e..e3eed81f2439 100644 --- a/drivers/net/wireless/ath/ath9k/mac.h +++ b/drivers/net/wireless/ath/ath9k/mac.h @@ -603,8 +603,6 @@ enum ath9k_tx_queue_flags { #define ATH9K_TXQ_USE_LOCKOUT_BKOFF_DIS 0x00000001 #define ATH9K_DECOMP_MASK_SIZE 128 -#define ATH9K_READY_TIME_LO_BOUND 50 -#define ATH9K_READY_TIME_HI_BOUND 96 enum ath9k_pkt_type { ATH9K_PKT_TYPE_NORMAL = 0, diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 563f8a9819a6..fc76052c0721 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1695,16 +1695,9 @@ int ath_cabq_update(struct ath_softc *sc) int qnum = sc->beacon.cabq->axq_qnum; ath9k_hw_get_txq_props(sc->sc_ah, qnum, &qi); - /* - * Ensure the readytime % is within the bounds. - */ - if (sc->config.cabqReadytime < ATH9K_READY_TIME_LO_BOUND) - sc->config.cabqReadytime = ATH9K_READY_TIME_LO_BOUND; - else if (sc->config.cabqReadytime > ATH9K_READY_TIME_HI_BOUND) - sc->config.cabqReadytime = ATH9K_READY_TIME_HI_BOUND; qi.tqi_readyTime = (cur_conf->beacon_interval * - sc->config.cabqReadytime) / 100; + ATH_CABQ_READY_TIME) / 100; ath_txq_update(sc, qnum, &qi); return 0; From c648ecb044a0536be0f40533663eae9f20f1e83e Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 11 Oct 2013 23:31:00 +0200 Subject: [PATCH 57/61] ath9k: make ath9k_uses_beacons static Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/main.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index d03b85e57614..5492a0ce0729 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -933,7 +933,6 @@ void ath9k_deinit_device(struct ath_softc *sc); void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw); void ath9k_reload_chainmask_settings(struct ath_softc *sc); -bool ath9k_uses_beacons(int type); void ath9k_spectral_scan_trigger(struct ieee80211_hw *hw); int ath9k_spectral_scan_config(struct ieee80211_hw *hw, enum spectral_mode spectral_mode); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index c01831b462a0..c42b55c1face 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -897,7 +897,7 @@ static void ath9k_stop(struct ieee80211_hw *hw) ath_dbg(common, CONFIG, "Driver halt\n"); } -bool ath9k_uses_beacons(int type) +static bool ath9k_uses_beacons(int type) { switch (type) { case NL80211_IFTYPE_AP: From e4744ec78669926000e47e6ec78b987c0b2f10e9 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 11 Oct 2013 23:31:01 +0200 Subject: [PATCH 58/61] ath9k_hw: remove references to hw->conf Accessing it to get the current operating channel is racy and in the way of further channel handling related changes Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar5008_phy.c | 2 +- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +- drivers/net/wireless/ath/ath9k/calib.c | 8 +++----- drivers/net/wireless/ath/ath9k/hw.c | 21 +++++++++------------ drivers/net/wireless/ath/ath9k/hw.h | 2 +- 5 files changed, 15 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index b197bf2047e7..ff415e863ee9 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -672,7 +672,7 @@ static void ar5008_hw_set_channel_regs(struct ath_hw *ah, } REG_WRITE(ah, AR_PHY_TURBO, phymode); - ath9k_hw_set11nmac2040(ah); + ath9k_hw_set11nmac2040(ah, chan); ENABLE_REGWRITE_BUFFER(ah); diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 312c868f05be..f3adafd33704 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -564,7 +564,7 @@ static void ar9003_hw_set_channel_regs(struct ath_hw *ah, REG_WRITE(ah, AR_PHY_GEN_CTRL, phymode); /* Configure MAC for 20/40 operation */ - ath9k_hw_set11nmac2040(ah); + ath9k_hw_set11nmac2040(ah, chan); /* global transmit timeout (25 TUs default)*/ REG_WRITE(ah, AR_GTXTO, 25 << AR_GTXTO_TIMEOUT_LIMIT_S); diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c index fe23026d82cd..d8db74b0ef66 100644 --- a/drivers/net/wireless/ath/ath9k/calib.c +++ b/drivers/net/wireless/ath/ath9k/calib.c @@ -186,7 +186,6 @@ void ath9k_hw_reset_calibration(struct ath_hw *ah, bool ath9k_hw_reset_calvalid(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); - struct ieee80211_conf *conf = &common->hw->conf; struct ath9k_cal_list *currCal = ah->cal_list_curr; if (!ah->caldata) @@ -208,7 +207,7 @@ bool ath9k_hw_reset_calvalid(struct ath_hw *ah) return true; ath_dbg(common, CALIBRATE, "Resetting Cal %d state for channel %u\n", - currCal->calData->calType, conf->chandef.chan->center_freq); + currCal->calData->calType, ah->curchan->chan->center_freq); ah->caldata->CalValid &= ~currCal->calData->calType; currCal->calState = CAL_WAITING; @@ -242,7 +241,6 @@ void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) int32_t val; u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask; struct ath_common *common = ath9k_hw_common(ah); - struct ieee80211_conf *conf = &common->hw->conf; s16 default_nf = ath9k_hw_get_default_nf(ah, chan); if (ah->caldata) @@ -252,7 +250,7 @@ void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) if (chainmask & (1 << i)) { s16 nfval; - if ((i >= AR5416_MAX_CHAINS) && !conf_is_ht40(conf)) + if ((i >= AR5416_MAX_CHAINS) && !IS_CHAN_HT40(chan)) continue; if (h) @@ -314,7 +312,7 @@ void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) ENABLE_REGWRITE_BUFFER(ah); for (i = 0; i < NUM_NF_READINGS; i++) { if (chainmask & (1 << i)) { - if ((i >= AR5416_MAX_CHAINS) && !conf_is_ht40(conf)) + if ((i >= AR5416_MAX_CHAINS) && !IS_CHAN_HT40(chan)) continue; val = REG_READ(ah, ah->nf_regs[i]); diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index bc7382fbcf66..dcdbab48709e 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -130,29 +130,29 @@ void ath9k_debug_sync_cause(struct ath_common *common, u32 sync_cause) static void ath9k_hw_set_clockrate(struct ath_hw *ah) { - struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf; struct ath_common *common = ath9k_hw_common(ah); + struct ath9k_channel *chan = ah->curchan; unsigned int clockrate; /* AR9287 v1.3+ uses async FIFO and runs the MAC at 117 MHz */ if (AR_SREV_9287(ah) && AR_SREV_9287_13_OR_LATER(ah)) clockrate = 117; - else if (!ah->curchan) /* should really check for CCK instead */ + else if (!chan) /* should really check for CCK instead */ clockrate = ATH9K_CLOCK_RATE_CCK; - else if (conf->chandef.chan->band == IEEE80211_BAND_2GHZ) + else if (IS_CHAN_2GHZ(chan)) clockrate = ATH9K_CLOCK_RATE_2GHZ_OFDM; else if (ah->caps.hw_caps & ATH9K_HW_CAP_FASTCLOCK) clockrate = ATH9K_CLOCK_FAST_RATE_5GHZ_OFDM; else clockrate = ATH9K_CLOCK_RATE_5GHZ_OFDM; - if (conf_is_ht40(conf)) + if (IS_CHAN_HT40(chan)) clockrate *= 2; if (ah->curchan) { - if (IS_CHAN_HALF_RATE(ah->curchan)) + if (IS_CHAN_HALF_RATE(chan)) clockrate /= 2; - if (IS_CHAN_QUARTER_RATE(ah->curchan)) + if (IS_CHAN_QUARTER_RATE(chan)) clockrate /= 4; } @@ -1038,7 +1038,6 @@ static bool ath9k_hw_set_global_txtimeout(struct ath_hw *ah, u32 tu) void ath9k_hw_init_global_settings(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); - struct ieee80211_conf *conf = &common->hw->conf; const struct ath9k_channel *chan = ah->curchan; int acktimeout, ctstimeout, ack_offset = 0; int slottime; @@ -1113,8 +1112,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah) * BA frames in some implementations, but it has been found to fix ACK * timeout issues in other cases as well. */ - if (conf->chandef.chan && - conf->chandef.chan->band == IEEE80211_BAND_2GHZ && + if (IS_CHAN_2GHZ(chan) && !IS_CHAN_HALF_RATE(chan) && !IS_CHAN_QUARTER_RATE(chan)) { acktimeout += 64 - sifstime - ah->slottime; ctstimeout += 48 - sifstime - ah->slottime; @@ -2946,12 +2944,11 @@ void ath9k_hw_set_tsfadjust(struct ath_hw *ah, bool set) } EXPORT_SYMBOL(ath9k_hw_set_tsfadjust); -void ath9k_hw_set11nmac2040(struct ath_hw *ah) +void ath9k_hw_set11nmac2040(struct ath_hw *ah, struct ath9k_channel *chan) { - struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf; u32 macmode; - if (conf_is_ht40(conf) && !ah->config.cwm_ignore_extcca) + if (IS_CHAN_HT40(chan) && !ah->config.cwm_ignore_extcca) macmode = AR_2040_JOINED_RX_CLEAR; else macmode = 0; diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 9d04d67843b2..81fcbc756122 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -1003,7 +1003,7 @@ void ath9k_hw_reset_tsf(struct ath_hw *ah); void ath9k_hw_set_tsfadjust(struct ath_hw *ah, bool set); void ath9k_hw_init_global_settings(struct ath_hw *ah); u32 ar9003_get_pll_sqsum_dvc(struct ath_hw *ah); -void ath9k_hw_set11nmac2040(struct ath_hw *ah); +void ath9k_hw_set11nmac2040(struct ath_hw *ah, struct ath9k_channel *chan); void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period); void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah, const struct ath9k_beacon_state *bs); From 448a71cc747d5d18a126a1214bf4db3ec1ea1e05 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Fri, 11 Oct 2013 18:33:04 -0700 Subject: [PATCH 59/61] mwifiex: use alloc_workqueue() function It replaces deprecated create_workqueue(). Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c index fd778337deee..408f307694aa 100644 --- a/drivers/net/wireless/mwifiex/main.c +++ b/drivers/net/wireless/mwifiex/main.c @@ -880,7 +880,9 @@ mwifiex_add_card(void *card, struct semaphore *sem, adapter->cmd_wait_q.status = 0; adapter->scan_wait_q_woken = false; - adapter->workqueue = create_workqueue("MWIFIEX_WORK_QUEUE"); + adapter->workqueue = + alloc_workqueue("MWIFIEX_WORK_QUEUE", + WQ_HIGHPRI | WQ_MEM_RECLAIM | WQ_UNBOUND, 1); if (!adapter->workqueue) goto err_kmalloc; From 7122e660027f806c2d01b3db6e322aff98183e75 Mon Sep 17 00:00:00 2001 From: Kevin Lo Date: Sat, 12 Oct 2013 23:25:23 +0800 Subject: [PATCH 60/61] rt2x00: rt2800lib: fix RF registers for RT5390/RT5392 Update rf registers to use the same values that the MediaTek/Ralink reference driver DPO_RT5572_LinuxSTA_2.6.1.3_20121022 uses. References: RF5390RegTable in chips/rt5390.c RF5392RegTable in chips/rt5390.c Tested on TP-Link TL-WN727N and D-Link DWA-140 Rev.b3 usb wifi dongles. Signed-off-by: Kevin Lo Acked-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 78b31e308060..cd99b1560810 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -6475,7 +6475,7 @@ static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev) rt2800_rfcsr_write(rt2x00dev, 28, 0x00); rt2800_rfcsr_write(rt2x00dev, 29, 0x10); - rt2800_rfcsr_write(rt2x00dev, 30, 0x00); + rt2800_rfcsr_write(rt2x00dev, 30, 0x10); rt2800_rfcsr_write(rt2x00dev, 31, 0x80); rt2800_rfcsr_write(rt2x00dev, 32, 0x80); rt2800_rfcsr_write(rt2x00dev, 33, 0x00); @@ -6513,7 +6513,7 @@ static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev) rt2800_rfcsr_write(rt2x00dev, 56, 0x22); rt2800_rfcsr_write(rt2x00dev, 57, 0x80); rt2800_rfcsr_write(rt2x00dev, 58, 0x7f); - rt2800_rfcsr_write(rt2x00dev, 59, 0x63); + rt2800_rfcsr_write(rt2x00dev, 59, 0x8f); rt2800_rfcsr_write(rt2x00dev, 60, 0x45); if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) @@ -6533,7 +6533,6 @@ static void rt2800_init_rfcsr_5392(struct rt2x00_dev *rt2x00dev) rt2800_rf_init_calibration(rt2x00dev, 2); rt2800_rfcsr_write(rt2x00dev, 1, 0x17); - rt2800_rfcsr_write(rt2x00dev, 2, 0x80); rt2800_rfcsr_write(rt2x00dev, 3, 0x88); rt2800_rfcsr_write(rt2x00dev, 5, 0x10); rt2800_rfcsr_write(rt2x00dev, 6, 0xe0); From b6b561c31d51db3dec0cb55412a5d7a1a2397521 Mon Sep 17 00:00:00 2001 From: Kevin Lo Date: Mon, 14 Oct 2013 10:05:45 +0800 Subject: [PATCH 61/61] rt2x00: rt2800lib: remove duplicate rf_vals for RF3053 lready have rf_vals_3x with same values. Hence rf_vals_3053 is removed in this patch. Signed-off-by: Kevin Lo Acked-by: Paul Menzel Acked-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 75 +------------------------ 1 file changed, 3 insertions(+), 72 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index cd99b1560810..aa8789423937 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -7246,7 +7246,7 @@ static const struct rf_channel rf_vals[] = { /* * RF value list for rt3xxx - * Supports: 2.4 GHz (all) & 5.2 GHz (RF3052) + * Supports: 2.4 GHz (all) & 5.2 GHz (RF3052 & RF3053) */ static const struct rf_channel rf_vals_3x[] = { {1, 241, 2, 2 }, @@ -7442,72 +7442,6 @@ static const struct rf_channel rf_vals_5592_xtal40[] = { {196, 83, 0, 12, 1}, }; -static const struct rf_channel rf_vals_3053[] = { - /* Channel, N, R, K */ - {1, 241, 2, 2}, - {2, 241, 2, 7}, - {3, 242, 2, 2}, - {4, 242, 2, 7}, - {5, 243, 2, 2}, - {6, 243, 2, 7}, - {7, 244, 2, 2}, - {8, 244, 2, 7}, - {9, 245, 2, 2}, - {10, 245, 2, 7}, - {11, 246, 2, 2}, - {12, 246, 2, 7}, - {13, 247, 2, 2}, - {14, 248, 2, 4}, - - {36, 0x56, 0, 4}, - {38, 0x56, 0, 6}, - {40, 0x56, 0, 8}, - {44, 0x57, 0, 0}, - {46, 0x57, 0, 2}, - {48, 0x57, 0, 4}, - {52, 0x57, 0, 8}, - {54, 0x57, 0, 10}, - {56, 0x58, 0, 0}, - {60, 0x58, 0, 4}, - {62, 0x58, 0, 6}, - {64, 0x58, 0, 8}, - - {100, 0x5B, 0, 8}, - {102, 0x5B, 0, 10}, - {104, 0x5C, 0, 0}, - {108, 0x5C, 0, 4}, - {110, 0x5C, 0, 6}, - {112, 0x5C, 0, 8}, - - /* NOTE: Channel 114 has been removed intentionally. - * The EEPROM contains no TX power values for that, - * and it is disabled in the vendor driver as well. - */ - - {116, 0x5D, 0, 0}, - {118, 0x5D, 0, 2}, - {120, 0x5D, 0, 4}, - {124, 0x5D, 0, 8}, - {126, 0x5D, 0, 10}, - {128, 0x5E, 0, 0}, - {132, 0x5E, 0, 4}, - {134, 0x5E, 0, 6}, - {136, 0x5E, 0, 8}, - {140, 0x5F, 0, 0}, - - {149, 0x5F, 0, 9}, - {151, 0x5F, 0, 11}, - {153, 0x60, 0, 1}, - {157, 0x60, 0, 5}, - {159, 0x60, 0, 7}, - {161, 0x60, 0, 9}, - {165, 0x61, 0, 1}, - {167, 0x61, 0, 3}, - {169, 0x61, 0, 5}, - {171, 0x61, 0, 7}, - {173, 0x61, 0, 9}, -}; - static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; @@ -7597,14 +7531,11 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00_rf(rt2x00dev, RF5392)) { spec->num_channels = 14; spec->channels = rf_vals_3x; - } else if (rt2x00_rf(rt2x00dev, RF3052)) { + } else if (rt2x00_rf(rt2x00dev, RF3052) || + rt2x00_rf(rt2x00dev, RF3053)) { spec->supported_bands |= SUPPORT_BAND_5GHZ; spec->num_channels = ARRAY_SIZE(rf_vals_3x); spec->channels = rf_vals_3x; - } else if (rt2x00_rf(rt2x00dev, RF3053)) { - spec->supported_bands |= SUPPORT_BAND_5GHZ; - spec->num_channels = ARRAY_SIZE(rf_vals_3053); - spec->channels = rf_vals_3053; } else if (rt2x00_rf(rt2x00dev, RF5592)) { spec->supported_bands |= SUPPORT_BAND_5GHZ;