Merge master.kernel.org:/home/rmk/linux-2.6-arm

2025-01-22 22:49:59 +07:00 · 2005-11-11 16:30:35 -08:00 · 2005-11-11 16:30:35 -08:00 · 9cf93d7b2f
commit 9cf93d7b2f
parent 401221501a c6bd232843
18 changed files with 658 additions and 372 deletions
--- a/arch/arm/configs/enp2611_defconfig
+++ b/arch/arm/configs/enp2611_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13
-# Wed Sep 14 10:51:52 2005
+# Linux kernel version: 2.6.14-git13
+# Thu Nov 10 15:12:48 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y

+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # System Type
 #
@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@ -124,7 +144,6 @@ CONFIG_XSCALE_PMU=y
 CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set

 #
@ -144,6 +163,8 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y

 #
@ -162,6 +183,7 @@ CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmw
 # At least one emulation must be selected
 #
 CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
 # CONFIG_FPE_FASTFPE is not set

 #
@ -205,13 +227,18 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set

+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
 #
 # SCTP Configuration (EXPERIMENTAL)
 #
@ -228,6 +255,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set

@ -238,6 +269,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set

 #
 # Device Drivers
@ -273,6 +305,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set

 #
 # RAM/ROM/Flash chip drivers
@ -307,7 +340,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_PCI is not set
 # CONFIG_MTD_PLATRAM is not set

@ -333,6 +365,11 @@ CONFIG_MTD_IXP2000=y
 #
 # CONFIG_MTD_NAND is not set

+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@ -358,21 +395,13 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set

 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set

 #
@ -409,6 +438,11 @@ CONFIG_DUMMY=y
 #
 # CONFIG_ARCNET is not set

+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
 #
 # Ethernet (10 or 100Mbit)
 #
@ -416,6 +450,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
@ -455,6 +490,7 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@ -464,6 +500,7 @@ CONFIG_EEPRO100=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set

@ -609,6 +646,7 @@ CONFIG_IXP2000_WATCHDOG=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set

 #
 # I2C support
@ -634,7 +672,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@ -649,7 +686,6 @@ CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_SENSOR=y

 #
 # Miscellaneous I2C Chip support
@ -662,6 +698,7 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@ -671,6 +708,7 @@ CONFIG_SENSORS_EEPROM=y
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@ -701,6 +739,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@ -710,6 +749,10 @@ CONFIG_HWMON=y
 # Misc devices
 #

+#
+# Multimedia Capabilities Port drivers
+#
+
 #
 # Multimedia devices
 #
@ -737,6 +780,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set

+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@ -765,10 +812,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@ -777,6 +820,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set

 #
 # CD-ROM/DVD Filesystems
@ -796,11 +840,10 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set

 #
 # Miscellaneous filesystems
@ -816,6 +859,7 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@ -848,6 +892,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set

 #
 # Partition Types
@ -886,6 +931,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@ -894,7 +940,9 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
@ -920,6 +968,7 @@ CONFIG_DEBUG_LL=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
--- a/arch/arm/configs/ixdp2400_defconfig
+++ b/arch/arm/configs/ixdp2400_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13
-# Wed Sep 14 10:52:01 2005
+# Linux kernel version: 2.6.14-git13
+# Thu Nov 10 15:14:13 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y

+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # System Type
 #
@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
 CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set

 #
@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y

 #
@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmw
 # At least one emulation must be selected
 #
 CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
 # CONFIG_FPE_FASTFPE is not set

 #
@ -206,13 +228,18 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set

+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
 #
 # SCTP Configuration (EXPERIMENTAL)
 #
@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set

@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set

 #
 # Device Drivers
@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set

 #
 # RAM/ROM/Flash chip drivers
@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_PCI is not set
 # CONFIG_MTD_PLATRAM is not set

@ -334,6 +366,11 @@ CONFIG_MTD_IXP2000=y
 #
 # CONFIG_MTD_NAND is not set

+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set

 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set

 #
@ -410,6 +439,11 @@ CONFIG_DUMMY=y
 #
 # CONFIG_ARCNET is not set

+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
 #
 # Ethernet (10 or 100Mbit)
 #
@ -417,6 +451,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
@ -456,6 +491,7 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@ -465,6 +501,7 @@ CONFIG_EEPRO100=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set

@ -610,6 +647,7 @@ CONFIG_IXP2000_WATCHDOG=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set

 #
 # I2C support
@ -635,7 +673,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@ -650,7 +687,6 @@ CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_SENSOR=y

 #
 # Miscellaneous I2C Chip support
@ -663,6 +699,7 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@ -672,6 +709,7 @@ CONFIG_SENSORS_EEPROM=y
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@ -702,6 +740,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@ -711,6 +750,10 @@ CONFIG_HWMON=y
 # Misc devices
 #

+#
+# Multimedia Capabilities Port drivers
+#
+
 #
 # Multimedia devices
 #
@ -738,6 +781,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set

+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@ -766,10 +813,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@ -778,6 +821,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set

 #
 # CD-ROM/DVD Filesystems
@ -797,11 +841,10 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set

 #
 # Miscellaneous filesystems
@ -817,6 +860,7 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@ -849,6 +893,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set

 #
 # Partition Types
@ -887,6 +932,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@ -895,7 +941,9 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
@ -921,6 +969,7 @@ CONFIG_DEBUG_LL=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
--- a/arch/arm/configs/ixdp2401_defconfig
+++ b/arch/arm/configs/ixdp2401_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13
-# Wed Sep 14 10:52:10 2005
+# Linux kernel version: 2.6.14-git13
+# Thu Nov 10 15:14:50 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y

+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # System Type
 #
@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
 CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set

 #
@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y

 #
@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firm
 # At least one emulation must be selected
 #
 CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
 # CONFIG_FPE_FASTFPE is not set

 #
@ -206,13 +228,18 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set

+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
 #
 # SCTP Configuration (EXPERIMENTAL)
 #
@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set

@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set

 #
 # Device Drivers
@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set

 #
 # RAM/ROM/Flash chip drivers
@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_PCI is not set
 # CONFIG_MTD_PLATRAM is not set

@ -334,6 +366,11 @@ CONFIG_MTD_IXP2000=y
 #
 # CONFIG_MTD_NAND is not set

+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set

 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set

 #
@ -410,6 +439,11 @@ CONFIG_DUMMY=y
 #
 # CONFIG_ARCNET is not set

+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
 #
 # Ethernet (10 or 100Mbit)
 #
@ -417,6 +451,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
@ -457,6 +492,7 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@ -466,6 +502,7 @@ CONFIG_EEPRO100=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set

@ -611,6 +648,7 @@ CONFIG_IXP2000_WATCHDOG=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set

 #
 # I2C support
@ -636,7 +674,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@ -651,7 +688,6 @@ CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_SENSOR=y

 #
 # Miscellaneous I2C Chip support
@ -664,6 +700,7 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@ -673,6 +710,7 @@ CONFIG_SENSORS_EEPROM=y
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@ -703,6 +741,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@ -712,6 +751,10 @@ CONFIG_HWMON=y
 # Misc devices
 #

+#
+# Multimedia Capabilities Port drivers
+#
+
 #
 # Multimedia devices
 #
@ -739,6 +782,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set

+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@ -767,10 +814,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@ -779,6 +822,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set

 #
 # CD-ROM/DVD Filesystems
@ -798,11 +842,10 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set

 #
 # Miscellaneous filesystems
@ -818,6 +861,7 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@ -850,6 +894,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set

 #
 # Partition Types
@ -888,6 +933,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@ -896,7 +942,9 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
@ -922,6 +970,7 @@ CONFIG_DEBUG_LL=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
--- a/arch/arm/configs/ixdp2800_defconfig
+++ b/arch/arm/configs/ixdp2800_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13
-# Wed Sep 14 10:52:23 2005
+# Linux kernel version: 2.6.14-git13
+# Thu Nov 10 15:14:56 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y

+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # System Type
 #
@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
 CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set

 #
@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y

 #
@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/nfs ip=bootp mem=64M@0x0"
 # At least one emulation must be selected
 #
 CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
 # CONFIG_FPE_FASTFPE is not set

 #
@ -206,13 +228,18 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set

+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
 #
 # SCTP Configuration (EXPERIMENTAL)
 #
@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set

@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set

 #
 # Device Drivers
@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set

 #
 # RAM/ROM/Flash chip drivers
@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_PCI is not set
 # CONFIG_MTD_PLATRAM is not set

@ -334,6 +366,11 @@ CONFIG_MTD_IXP2000=y
 #
 # CONFIG_MTD_NAND is not set

+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set

 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set

 #
@ -410,6 +439,11 @@ CONFIG_DUMMY=y
 #
 # CONFIG_ARCNET is not set

+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
 #
 # Ethernet (10 or 100Mbit)
 #
@ -417,6 +451,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
@ -456,6 +491,7 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@ -465,6 +501,7 @@ CONFIG_EEPRO100=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set

@ -610,6 +647,7 @@ CONFIG_IXP2000_WATCHDOG=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set

 #
 # I2C support
@ -635,7 +673,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@ -650,7 +687,6 @@ CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_SENSOR=y

 #
 # Miscellaneous I2C Chip support
@ -663,6 +699,7 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@ -672,6 +709,7 @@ CONFIG_SENSORS_EEPROM=y
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@ -702,6 +740,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@ -711,6 +750,10 @@ CONFIG_HWMON=y
 # Misc devices
 #

+#
+# Multimedia Capabilities Port drivers
+#
+
 #
 # Multimedia devices
 #
@ -738,6 +781,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set

+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@ -766,10 +813,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@ -778,6 +821,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set

 #
 # CD-ROM/DVD Filesystems
@ -797,11 +841,10 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set

 #
 # Miscellaneous filesystems
@ -817,6 +860,7 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@ -849,6 +893,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set

 #
 # Partition Types
@ -887,6 +932,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@ -895,7 +941,9 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
@ -921,6 +969,7 @@ CONFIG_DEBUG_LL=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
--- a/arch/arm/configs/ixdp2801_defconfig
+++ b/arch/arm/configs/ixdp2801_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13
-# Wed Sep 14 10:52:16 2005
+# Linux kernel version: 2.6.14-git13
+# Thu Nov 10 15:15:03 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y

+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # System Type
 #
@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
 CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set

 #
@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y

 #
@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firm
 # At least one emulation must be selected
 #
 CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
 # CONFIG_FPE_FASTFPE is not set

 #
@ -206,13 +228,18 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set

+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
 #
 # SCTP Configuration (EXPERIMENTAL)
 #
@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set

@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set

 #
 # Device Drivers
@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set

 #
 # RAM/ROM/Flash chip drivers
@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_PCI is not set
 # CONFIG_MTD_PLATRAM is not set

@ -334,6 +366,11 @@ CONFIG_MTD_IXP2000=y
 #
 # CONFIG_MTD_NAND is not set

+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set

 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set

 #
@ -410,6 +439,11 @@ CONFIG_DUMMY=y
 #
 # CONFIG_ARCNET is not set

+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
 #
 # Ethernet (10 or 100Mbit)
 #
@ -417,6 +451,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
@ -457,6 +492,7 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@ -466,6 +502,7 @@ CONFIG_EEPRO100=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set

@ -611,6 +648,7 @@ CONFIG_IXP2000_WATCHDOG=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set

 #
 # I2C support
@ -636,7 +674,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@ -651,7 +688,6 @@ CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_SENSOR=y

 #
 # Miscellaneous I2C Chip support
@ -664,6 +700,7 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@ -673,6 +710,7 @@ CONFIG_SENSORS_EEPROM=y
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@ -703,6 +741,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@ -712,6 +751,10 @@ CONFIG_HWMON=y
 # Misc devices
 #

+#
+# Multimedia Capabilities Port drivers
+#
+
 #
 # Multimedia devices
 #
@ -739,6 +782,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set

+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@ -767,10 +814,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@ -779,6 +822,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set

 #
 # CD-ROM/DVD Filesystems
@ -798,11 +842,10 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set

 #
 # Miscellaneous filesystems
@ -818,6 +861,7 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@ -850,6 +894,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set

 #
 # Partition Types
@ -888,6 +933,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@ -896,7 +942,9 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
@ -922,6 +970,7 @@ CONFIG_DEBUG_LL=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
--- a/arch/arm/lib/csumpartial.S
+++ b/arch/arm/lib/csumpartial.S
@ -26,7 +26,7 @@ td1	.req	r4	@ save before use
 td2	.req	r5	@ save before use
 td3	.req	lr

-.zero:		mov	r0, sum
+.Lzero:		mov	r0, sum
 		add	sp, sp, #4
 		ldr	pc, [sp], #4

@ -34,8 +34,8 @@ td3	.req	lr
 		 * Handle 0 to 7 bytes, with any alignment of source and
 		 * destination pointers.  Note that when we get here, C = 0
 		 */
-.less8:		teq	len, #0			@ check for zero count
-		beq	.zero
+.Lless8:		teq	len, #0			@ check for zero count
+		beq	.Lzero

 		/* we must have at least one byte. */
 		tst	buf, #1			@ odd address?
@ -44,12 +44,12 @@ td3	.req	lr
 		subne	len, len, #1
 		adcnes	sum, sum, td0, put_byte_1

-.less4:		tst	len, #6
-		beq	.less8_byte
+.Lless4:		tst	len, #6
+		beq	.Lless8_byte

 		/* we are now half-word aligned */

-.less8_wordlp:
+.Lless8_wordlp:
 #if __LINUX_ARM_ARCH__ >= 4
 		ldrh	td0, [buf], #2
 		sub	len, len, #2
@ -65,19 +65,19 @@ td3	.req	lr
 #endif
 		adcs	sum, sum, td0
 		tst	len, #6
-		bne	.less8_wordlp
+		bne	.Lless8_wordlp

-.less8_byte:	tst	len, #1			@ odd number of bytes
+.Lless8_byte:	tst	len, #1			@ odd number of bytes
 		ldrneb	td0, [buf], #1		@ include last byte
 		adcnes	sum, sum, td0, put_byte_0	@ update checksum

-.done:		adc	r0, sum, #0		@ collect up the last carry
+.Ldone:		adc	r0, sum, #0		@ collect up the last carry
 		ldr	td0, [sp], #4
 		tst	td0, #1			@ check buffer alignment
 		movne	r0, r0, ror #8		@ rotate checksum by 8 bits
 		ldr	pc, [sp], #4		@ return

-.not_aligned:	tst	buf, #1			@ odd address
+.Lnot_aligned:	tst	buf, #1			@ odd address
 		ldrneb	td0, [buf], #1		@ make even
 		subne	len, len, #1
 		adcnes	sum, sum, td0, put_byte_1	@ update checksum
@ -102,14 +102,14 @@ td3	.req	lr
 ENTRY(csum_partial)
 		stmfd	sp!, {buf, lr}
 		cmp	len, #8			@ Ensure that we have at least
-		blo	.less8			@ 8 bytes to copy.
+		blo	.Lless8			@ 8 bytes to copy.

 		tst	buf, #1
 		movne	sum, sum, ror #8

 		adds	sum, sum, #0		@ C = 0
 		tst	buf, #3			@ Test destination alignment
-		blne	.not_aligned		@ aligh destination, return here
+		blne	.Lnot_aligned		@ align destination, return here

 1:		bics	ip, len, #31
 		beq	3f
@ -131,11 +131,11 @@ ENTRY(csum_partial)
 		ldmfd	sp!, {r4 - r5}

 3:		tst	len, #0x1c		@ should not change C
-		beq	.less4
+		beq	.Lless4

 4:		ldr	td0, [buf], #4
 		sub	len, len, #4
 		adcs	sum, sum, td0
 		tst	len, #0x1c
 		bne	4b
-		b	.less4
+		b	.Lless4
--- a/arch/arm/lib/csumpartialcopygeneric.S
+++ b/arch/arm/lib/csumpartialcopygeneric.S
@ -22,7 +22,7 @@ dst	.req	r1
 len	.req	r2
 sum	.req	r3

-.zero:		mov	r0, sum
+.Lzero:		mov	r0, sum
 		load_regs	ea

 		/*
@ -31,8 +31,9 @@ sum	.req	r3
 		 * the length.  Note that the source pointer hasn't been
 		 * aligned yet.
 		 */
-.dst_unaligned:	tst	dst, #1
-		beq	.dst_16bit
+.Ldst_unaligned:
+		tst	dst, #1
+		beq	.Ldst_16bit

 		load1b	ip
 		sub	len, len, #1
@ -41,7 +42,7 @@ sum	.req	r3
 		tst	dst, #2
 		moveq	pc, lr			@ dst is now 32bit aligned

-.dst_16bit:	load2b	r8, ip
+.Ldst_16bit:	load2b	r8, ip
 		sub	len, len, #2
 		adcs	sum, sum, r8, put_byte_0
 		strb	r8, [dst], #1
@ -53,12 +54,12 @@ sum	.req	r3
 		 * Handle 0 to 7 bytes, with any alignment of source and
 		 * destination pointers.  Note that when we get here, C = 0
 		 */
-.less8:		teq	len, #0			@ check for zero count
-		beq	.zero
+.Lless8:	teq	len, #0			@ check for zero count
+		beq	.Lzero

 		/* we must have at least one byte. */
 		tst	dst, #1			@ dst 16-bit aligned
-		beq	.less8_aligned
+		beq	.Lless8_aligned

 		/* Align dst */
 		load1b	ip
@ -66,7 +67,7 @@ sum	.req	r3
 		adcs	sum, sum, ip, put_byte_1	@ update checksum
 		strb	ip, [dst], #1
 		tst	len, #6
-		beq	.less8_byteonly
+		beq	.Lless8_byteonly

 1:		load2b	r8, ip
 		sub	len, len, #2
@ -74,15 +75,16 @@ sum	.req	r3
 		strb	r8, [dst], #1
 		adcs	sum, sum, ip, put_byte_1
 		strb	ip, [dst], #1
-.less8_aligned:	tst	len, #6
+.Lless8_aligned:
+		tst	len, #6
 		bne	1b
-.less8_byteonly:
+.Lless8_byteonly:
 		tst	len, #1
-		beq	.done
+		beq	.Ldone
 		load1b	r8
 		adcs	sum, sum, r8, put_byte_0	@ update checksum
 		strb	r8, [dst], #1
-		b	.done
+		b	.Ldone

 FN_ENTRY
 		mov	ip, sp
@ -90,11 +92,11 @@ FN_ENTRY
 		sub	fp, ip, #4

 		cmp	len, #8			@ Ensure that we have at least
-		blo	.less8			@ 8 bytes to copy.
+		blo	.Lless8			@ 8 bytes to copy.

 		adds	sum, sum, #0		@ C = 0
 		tst	dst, #3			@ Test destination alignment
-		blne	.dst_unaligned		@ align destination, return here
+		blne	.Ldst_unaligned		@ align destination, return here

 		/*
 		 * Ok, the dst pointer is now 32bit aligned, and we know
@ -103,7 +105,7 @@ FN_ENTRY
 		 */

 		tst	src, #3			@ Test source alignment
-		bne	.src_not_aligned
+		bne	.Lsrc_not_aligned

 		/* Routine for src & dst aligned */

@ -136,17 +138,17 @@ FN_ENTRY
 		adcs	sum, sum, r4

 4:		ands	len, len, #3
-		beq	.done
+		beq	.Ldone
 		load1l	r4
 		tst	len, #2
 		mov	r5, r4, get_byte_0
-		beq	.exit
+		beq	.Lexit
 		adcs	sum, sum, r4, push #16
 		strb	r5, [dst], #1
 		mov	r5, r4, get_byte_1
 		strb	r5, [dst], #1
 		mov	r5, r4, get_byte_2
-.exit:		tst	len, #1
+.Lexit:		tst	len, #1
 		strneb	r5, [dst], #1
 		andne	r5, r5, #255
 		adcnes	sum, sum, r5, put_byte_0
@ -157,20 +159,20 @@ FN_ENTRY
 		 * the inefficient byte manipulations in the
 		 * architecture independent code.
 		 */
-.done:		adc	r0, sum, #0
+.Ldone:		adc	r0, sum, #0
 		ldr	sum, [sp, #0]		@ dst
 		tst	sum, #1
 		movne	r0, r0, ror #8
 		load_regs	ea

-.src_not_aligned:
+.Lsrc_not_aligned:
 		adc	sum, sum, #0		@ include C from dst alignment
 		and	ip, src, #3
 		bic	src, src, #3
 		load1l	r5
 		cmp	ip, #2
-		beq	.src2_aligned
-		bhi	.src3_aligned
+		beq	.Lsrc2_aligned
+		bhi	.Lsrc3_aligned
 		mov	r4, r5, pull #8		@ C = 0
 		bics	ip, len, #15
 		beq	2f
@ -211,18 +213,18 @@ FN_ENTRY
 		adcs	sum, sum, r4
 		mov	r4, r5, pull #8
 4:		ands	len, len, #3
-		beq	.done
+		beq	.Ldone
 		mov	r5, r4, get_byte_0
 		tst	len, #2
-		beq	.exit
+		beq	.Lexit
 		adcs	sum, sum, r4, push #16
 		strb	r5, [dst], #1
 		mov	r5, r4, get_byte_1
 		strb	r5, [dst], #1
 		mov	r5, r4, get_byte_2
-		b	.exit
+		b	.Lexit

-.src2_aligned:	mov	r4, r5, pull #16
+.Lsrc2_aligned:	mov	r4, r5, pull #16
 		adds	sum, sum, #0
 		bics	ip, len, #15
 		beq	2f
@ -263,20 +265,20 @@ FN_ENTRY
 		adcs	sum, sum, r4
 		mov	r4, r5, pull #16
 4:		ands	len, len, #3
-		beq	.done
+		beq	.Ldone
 		mov	r5, r4, get_byte_0
 		tst	len, #2
-		beq	.exit
+		beq	.Lexit
 		adcs	sum, sum, r4
 		strb	r5, [dst], #1
 		mov	r5, r4, get_byte_1
 		strb	r5, [dst], #1
 		tst	len, #1
-		beq	.done
+		beq	.Ldone
 		load1b	r5
-		b	.exit
+		b	.Lexit

-.src3_aligned:	mov	r4, r5, pull #24
+.Lsrc3_aligned:	mov	r4, r5, pull #24
 		adds	sum, sum, #0
 		bics	ip, len, #15
 		beq	2f
@ -317,10 +319,10 @@ FN_ENTRY
 		adcs	sum, sum, r4
 		mov	r4, r5, pull #24
 4:		ands	len, len, #3
-		beq	.done
+		beq	.Ldone
 		mov	r5, r4, get_byte_0
 		tst	len, #2
-		beq	.exit
+		beq	.Lexit
 		strb	r5, [dst], #1
 		adcs	sum, sum, r4
 		load1l	r4
@ -328,4 +330,4 @@ FN_ENTRY
 		strb	r5, [dst], #1
 		adcs	sum, sum, r4, push #24
 		mov	r5, r4, get_byte_1
-		b	.exit
+		b	.Lexit
--- a/arch/arm/lib/delay.S
+++ b/arch/arm/lib/delay.S
@ -11,7 +11,7 @@
 #include <asm/assembler.h>
 		.text

-LC0:		.word	loops_per_jiffy
+.LC0:		.word	loops_per_jiffy

 /*
 * 0 <= r0 <= 2000
@ -21,7 +21,7 @@ ENTRY(__udelay)
 		orr	r2, r2, #0x00db
 		mul	r0, r2, r0
 ENTRY(__const_udelay)				@ 0 <= r0 <= 0x01ffffff
-		ldr	r2, LC0
+		ldr	r2, .LC0
 		ldr	r2, [r2]		@ max = 0x0fffffff
 		mov	r0, r0, lsr #11		@ max = 0x00003fff
 		mov	r2, r2, lsr #11		@ max = 0x0003ffff
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@ -27,7 +27,7 @@ ENTRY(_find_first_zero_bit_le)
 		mov	r2, #0
 1:		ldrb	r3, [r0, r2, lsr #3]
 		eors	r3, r3, #0xff		@ invert bits
-		bne	.found			@ any now set - found zero bit
+		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
 2:		cmp	r2, r1			@ any more?
 		blo	1b
@ -46,7 +46,7 @@ ENTRY(_find_next_zero_bit_le)
 		ldrb	r3, [r0, r2, lsr #3]
 		eor	r3, r3, #0xff		@ now looking for a 1 bit
 		movs	r3, r3, lsr ip		@ shift off unused bits
-		bne	.found
+		bne	.L_found
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
@ -61,7 +61,7 @@ ENTRY(_find_first_bit_le)
 		mov	r2, #0
 1:		ldrb	r3, [r0, r2, lsr #3]
 		movs	r3, r3
-		bne	.found			@ any now set - found zero bit
+		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
 2:		cmp	r2, r1			@ any more?
 		blo	1b
@ -79,7 +79,7 @@ ENTRY(_find_next_bit_le)
 		beq	1b			@ If new byte, goto old routine
 		ldrb	r3, [r0, r2, lsr #3]
 		movs	r3, r3, lsr ip		@ shift off unused bits
-		bne	.found
+		bne	.L_found
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
@ -93,7 +93,7 @@ ENTRY(_find_first_zero_bit_be)
 1:		eor	r3, r2, #0x18		@ big endian byte ordering
 		ldrb	r3, [r0, r3, lsr #3]
 		eors	r3, r3, #0xff		@ invert bits
-		bne	.found			@ any now set - found zero bit
+		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
 2:		cmp	r2, r1			@ any more?
 		blo	1b
@ -109,7 +109,7 @@ ENTRY(_find_next_zero_bit_be)
 		ldrb	r3, [r0, r3, lsr #3]
 		eor	r3, r3, #0xff		@ now looking for a 1 bit
 		movs	r3, r3, lsr ip		@ shift off unused bits
-		bne	.found
+		bne	.L_found
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
@ -121,7 +121,7 @@ ENTRY(_find_first_bit_be)
 1:		eor	r3, r2, #0x18		@ big endian byte ordering
 		ldrb	r3, [r0, r3, lsr #3]
 		movs	r3, r3
-		bne	.found			@ any now set - found zero bit
+		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
 2:		cmp	r2, r1			@ any more?
 		blo	1b
@ -136,7 +136,7 @@ ENTRY(_find_next_bit_be)
 		eor	r3, r2, #0x18		@ big endian byte ordering
 		ldrb	r3, [r0, r3, lsr #3]
 		movs	r3, r3, lsr ip		@ shift off unused bits
-		bne	.found
+		bne	.L_found
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
@ -146,7 +146,7 @@ ENTRY(_find_next_bit_be)
 /*
 * One or more bits in the LSB of r3 are assumed to be set.
 */
-.found:
+.L_found:
 #if __LINUX_ARM_ARCH__ >= 5
 		rsb	r1, r3, #0
 		and	r3, r3, r1
--- a/arch/arm/lib/io-acorn.S
+++ b/arch/arm/lib/io-acorn.S
@ -17,7 +17,7 @@
 		.text
 		.align

-.iosl_warning:
+.Liosl_warning:
 		.ascii	"<4>insl/outsl not implemented, called from %08lX\0"
 		.align

@ -27,6 +27,6 @@
 */
 ENTRY(insl)
 ENTRY(outsl)
-		adr	r0, .iosl_warning
+		adr	r0, .Liosl_warning
 		mov	r1, lr
 		b	printk
--- a/arch/arm/lib/io-readsb.S
+++ b/arch/arm/lib/io-readsb.S
@ -10,7 +10,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>

-.insb_align:	rsb	ip, ip, #4
+.Linsb_align:	rsb	ip, ip, #4
 		cmp	ip, r2
 		movgt	ip, r2
 		cmp	ip, #2
@ -21,20 +21,20 @@
 		ldrgtb	r3, [r0]
 		strgtb	r3, [r1], #1
 		subs	r2, r2, ip
-		bne	.insb_aligned
+		bne	.Linsb_aligned

 ENTRY(__raw_readsb)
 		teq	r2, #0		@ do we have to check for the zero len?
 		moveq	pc, lr
 		ands	ip, r1, #3
-		bne	.insb_align
+		bne	.Linsb_align

-.insb_aligned:	stmfd	sp!, {r4 - r6, lr}
+.Linsb_aligned:	stmfd	sp!, {r4 - r6, lr}

 		subs	r2, r2, #16
-		bmi	.insb_no_16
+		bmi	.Linsb_no_16

-.insb_16_lp:	ldrb	r3, [r0]
+.Linsb_16_lp:	ldrb	r3, [r0]
 		ldrb	r4, [r0]
 		ldrb	r5, [r0]
 		mov	r3, r3,     put_byte_0
@ -69,13 +69,13 @@ ENTRY(__raw_readsb)
 		stmia	r1!, {r3 - r6}

 		subs	r2, r2, #16
-		bpl	.insb_16_lp
+		bpl	.Linsb_16_lp

 		tst	r2, #15
 		LOADREGS(eqfd, sp!, {r4 - r6, pc})

-.insb_no_16:	tst	r2, #8
-		beq	.insb_no_8
+.Linsb_no_16:	tst	r2, #8
+		beq	.Linsb_no_8

 		ldrb	r3, [r0]
 		ldrb	r4, [r0]
@ -95,8 +95,8 @@ ENTRY(__raw_readsb)
 		orr	r4, r4, ip, put_byte_3
 		stmia	r1!, {r3, r4}

-.insb_no_8:	tst	r2, #4
-		beq	.insb_no_4
+.Linsb_no_8:	tst	r2, #4
+		beq	.Linsb_no_4

 		ldrb	r3, [r0]
 		ldrb	r4, [r0]
@ -108,7 +108,7 @@ ENTRY(__raw_readsb)
 		orr	r3, r3, r6, put_byte_3
 		str	r3, [r1], #4

-.insb_no_4:	ands	r2, r2, #3
+.Linsb_no_4:	ands	r2, r2, #3
 		LOADREGS(eqfd, sp!, {r4 - r6, pc})

 		cmp	r2, #2
--- a/arch/arm/lib/io-readsw-armv3.S
+++ b/arch/arm/lib/io-readsw-armv3.S
@ -11,16 +11,16 @@
 #include <asm/assembler.h>
 #include <asm/hardware.h>

-.insw_bad_alignment:
-		adr	r0, .insw_bad_align_msg
+.Linsw_bad_alignment:
+		adr	r0, .Linsw_bad_align_msg
 		mov	r2, lr
 		b	panic
-.insw_bad_align_msg:
+.Linsw_bad_align_msg:
 		.asciz	"insw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
 		.align

-.insw_align:	tst	r1, #1
-		bne	.insw_bad_alignment
+.Linsw_align:	tst	r1, #1
+		bne	.Linsw_bad_alignment

 		ldr	r3, [r0]
 		strb	r3, [r1], #1
@ -34,16 +34,16 @@ ENTRY(__raw_readsw)
 		teq	r2, #0		@ do we have to check for the zero len?
 		moveq	pc, lr
 		tst	r1, #3
-		bne	.insw_align
+		bne	.Linsw_align

-.insw_aligned:	mov	ip, #0xff
+.Linsw_aligned:	mov	ip, #0xff
 		orr	ip, ip, ip, lsl #8
 		stmfd	sp!, {r4, r5, r6, lr}

 		subs	r2, r2, #8
-		bmi	.no_insw_8
+		bmi	.Lno_insw_8

-.insw_8_lp:	ldr	r3, [r0]
+.Linsw_8_lp:	ldr	r3, [r0]
 		and	r3, r3, ip
 		ldr	r4, [r0]
 		orr	r3, r3, r4, lsl #16
@ -66,13 +66,13 @@ ENTRY(__raw_readsw)
 		stmia	r1!, {r3 - r6}

 		subs	r2, r2, #8
-		bpl	.insw_8_lp
+		bpl	.Linsw_8_lp

 		tst	r2, #7
 		LOADREGS(eqfd, sp!, {r4, r5, r6, pc})

-.no_insw_8:	tst	r2, #4
-		beq	.no_insw_4
+.Lno_insw_8:	tst	r2, #4
+		beq	.Lno_insw_4

 		ldr	r3, [r0]
 		and	r3, r3, ip
@ -86,8 +86,8 @@ ENTRY(__raw_readsw)

 		stmia	r1!, {r3, r4}

-.no_insw_4:	tst	r2, #2
-		beq	.no_insw_2
+.Lno_insw_4:	tst	r2, #2
+		beq	.Lno_insw_2

 		ldr	r3, [r0]
 		and	r3, r3, ip
@ -96,7 +96,7 @@ ENTRY(__raw_readsw)

 		str	r3, [r1], #4

-.no_insw_2:	tst	r2, #1
+.Lno_insw_2:	tst	r2, #1
 		ldrne	r3, [r0]
 		strneb	r3, [r1], #1
 		movne	r3, r3, lsr #8
--- a/arch/arm/lib/io-readsw-armv4.S
+++ b/arch/arm/lib/io-readsw-armv4.S
@ -18,8 +18,8 @@
 #endif
 		.endm

-.insw_align:	movs	ip, r1, lsl #31
-		bne	.insw_noalign
+.Linsw_align:	movs	ip, r1, lsl #31
+		bne	.Linsw_noalign
 		ldrh	ip, [r0]
 		sub	r2, r2, #1
 		strh	ip, [r1], #2
@ -28,14 +28,14 @@ ENTRY(__raw_readsw)
 		teq	r2, #0
 		moveq	pc, lr
 		tst	r1, #3
-		bne	.insw_align
+		bne	.Linsw_align

 		stmfd	sp!, {r4, r5, lr}

 		subs	r2, r2, #8
-		bmi	.no_insw_8
+		bmi	.Lno_insw_8

-.insw_8_lp:	ldrh	r3, [r0]
+.Linsw_8_lp:	ldrh	r3, [r0]
 		ldrh	r4, [r0]
 		pack	r3, r3, r4

@ -53,10 +53,10 @@ ENTRY(__raw_readsw)

 		subs	r2, r2, #8
 		stmia	r1!, {r3 - r5, ip}
-		bpl	.insw_8_lp
+		bpl	.Linsw_8_lp

-.no_insw_8:	tst	r2, #4
-		beq	.no_insw_4
+.Lno_insw_8:	tst	r2, #4
+		beq	.Lno_insw_4

 		ldrh	r3, [r0]
 		ldrh	r4, [r0]
@ -68,15 +68,15 @@ ENTRY(__raw_readsw)

 		stmia	r1!, {r3, r4}

-.no_insw_4:	movs	r2, r2, lsl #31
-		bcc	.no_insw_2
+.Lno_insw_4:	movs	r2, r2, lsl #31
+		bcc	.Lno_insw_2

 		ldrh	r3, [r0]
 		ldrh	ip, [r0]
 		pack	r3, r3, ip
 		str	r3, [r1], #4

-.no_insw_2:	ldrneh	r3, [r0]
+.Lno_insw_2:	ldrneh	r3, [r0]
 		strneh	r3, [r1]

 		ldmfd	sp!, {r4, r5, pc}
@ -93,7 +93,7 @@ ENTRY(__raw_readsw)
 #define pull_hbyte1		lsr #8
 #endif

-.insw_noalign:	stmfd	sp!, {r4, lr}
+.Linsw_noalign:	stmfd	sp!, {r4, lr}
 		ldrccb	ip, [r1, #-1]!
 		bcc	1f

--- a/arch/arm/lib/io-writesb.S
+++ b/arch/arm/lib/io-writesb.S
@ -30,7 +30,7 @@
 #endif
 		.endm

-.outsb_align:	rsb	ip, ip, #4
+.Loutsb_align:	rsb	ip, ip, #4
 		cmp	ip, r2
 		movgt	ip, r2
 		cmp	ip, #2
@ -41,44 +41,45 @@
 		ldrgtb	r3, [r1], #1
 		strgtb	r3, [r0]
 		subs	r2, r2, ip
-		bne	.outsb_aligned
+		bne	.Loutsb_aligned

 ENTRY(__raw_writesb)
 		teq	r2, #0		@ do we have to check for the zero len?
 		moveq	pc, lr
 		ands	ip, r1, #3
-		bne	.outsb_align
+		bne	.Loutsb_align

-.outsb_aligned:	stmfd	sp!, {r4, r5, lr}
+.Loutsb_aligned:
+		stmfd	sp!, {r4, r5, lr}

 		subs	r2, r2, #16
-		bmi	.outsb_no_16
+		bmi	.Loutsb_no_16

-.outsb_16_lp:	ldmia	r1!, {r3, r4, r5, ip}
+.Loutsb_16_lp:	ldmia	r1!, {r3, r4, r5, ip}
 		outword	r3
 		outword	r4
 		outword	r5
 		outword	ip
 		subs	r2, r2, #16
-		bpl	.outsb_16_lp
+		bpl	.Loutsb_16_lp

 		tst	r2, #15
 		LOADREGS(eqfd, sp!, {r4, r5, pc})

-.outsb_no_16:	tst	r2, #8
-		beq	.outsb_no_8
+.Loutsb_no_16:	tst	r2, #8
+		beq	.Loutsb_no_8

 		ldmia	r1!, {r3, r4}
 		outword	r3
 		outword	r4

-.outsb_no_8:	tst	r2, #4
-		beq	.outsb_no_4
+.Loutsb_no_8:	tst	r2, #4
+		beq	.Loutsb_no_4

 		ldr	r3, [r1], #4
 		outword	r3

-.outsb_no_4:	ands	r2, r2, #3
+.Loutsb_no_4:	ands	r2, r2, #3
 		LOADREGS(eqfd, sp!, {r4, r5, pc})

 		cmp	r2, #2
--- a/arch/arm/lib/io-writesw-armv3.S
+++ b/arch/arm/lib/io-writesw-armv3.S
@ -11,16 +11,16 @@
 #include <asm/assembler.h>
 #include <asm/hardware.h>

-.outsw_bad_alignment:
-		adr	r0, .outsw_bad_align_msg
+.Loutsw_bad_alignment:
+		adr	r0, .Loutsw_bad_align_msg
 		mov	r2, lr
 		b	panic
-.outsw_bad_align_msg:
+.Loutsw_bad_align_msg:
 		.asciz	"outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
 		.align

-.outsw_align:	tst	r1, #1
-		bne	.outsw_bad_alignment
+.Loutsw_align:	tst	r1, #1
+		bne	.Loutsw_bad_alignment

 		add	r1, r1, #2

@ -35,14 +35,14 @@ ENTRY(__raw_writesw)
 		teq	r2, #0		@ do we have to check for the zero len?
 		moveq	pc, lr
 		tst	r1, #3
-		bne	.outsw_align
+		bne	.Loutsw_align

-.outsw_aligned:	stmfd	sp!, {r4, r5, r6, lr}
+		stmfd	sp!, {r4, r5, r6, lr}

 		subs	r2, r2, #8
-		bmi	.no_outsw_8
+		bmi	.Lno_outsw_8

-.outsw_8_lp:	ldmia	r1!, {r3, r4, r5, r6}
+.Loutsw_8_lp:	ldmia	r1!, {r3, r4, r5, r6}

 		mov	ip, r3, lsl #16
 		orr	ip, ip, ip, lsr #16
@ -77,13 +77,13 @@ ENTRY(__raw_writesw)
 		str	ip, [r0]

 		subs	r2, r2, #8
-		bpl	.outsw_8_lp
+		bpl	.Loutsw_8_lp

 		tst	r2, #7
 		LOADREGS(eqfd, sp!, {r4, r5, r6, pc})

-.no_outsw_8:	tst	r2, #4
-		beq	.no_outsw_4
+.Lno_outsw_8:	tst	r2, #4
+		beq	.Lno_outsw_4

 		ldmia	r1!, {r3, r4}

@ -103,8 +103,8 @@ ENTRY(__raw_writesw)
 		orr	ip, ip, ip, lsl #16
 		str	ip, [r0]

-.no_outsw_4:	tst	r2, #2
-		beq	.no_outsw_2
+.Lno_outsw_4:	tst	r2, #2
+		beq	.Lno_outsw_2

 		ldr	r3, [r1], #4

@ -116,7 +116,7 @@ ENTRY(__raw_writesw)
 		orr	ip, ip, ip, lsl #16
 		str	ip, [r0]

-.no_outsw_2:	tst	r2, #1
+.Lno_outsw_2:	tst	r2, #1

 		ldrne	r3, [r1]

--- a/arch/arm/lib/io-writesw-armv4.S
+++ b/arch/arm/lib/io-writesw-armv4.S
@ -22,8 +22,8 @@
 #endif
 		.endm

-.outsw_align:	movs	ip, r1, lsl #31
-		bne	.outsw_noalign
+.Loutsw_align:	movs	ip, r1, lsl #31
+		bne	.Loutsw_noalign

 		ldrh	r3, [r1], #2
 		sub	r2, r2, #1
@ -33,35 +33,35 @@ ENTRY(__raw_writesw)
 		teq	r2, #0
 		moveq	pc, lr
 		ands	r3, r1, #3
-		bne	.outsw_align
+		bne	.Loutsw_align

 		stmfd	sp!, {r4, r5, lr}

 		subs	r2, r2, #8
-		bmi	.no_outsw_8
+		bmi	.Lno_outsw_8

-.outsw_8_lp:	ldmia	r1!, {r3, r4, r5, ip}
+.Loutsw_8_lp:	ldmia	r1!, {r3, r4, r5, ip}
 		subs	r2, r2, #8
 		outword	r3
 		outword	r4
 		outword	r5
 		outword	ip
-		bpl	.outsw_8_lp
+		bpl	.Loutsw_8_lp

-.no_outsw_8:	tst	r2, #4
-		beq	.no_outsw_4
+.Lno_outsw_8:	tst	r2, #4
+		beq	.Lno_outsw_4

 		ldmia	r1!, {r3, ip}
 		outword	r3
 		outword	ip

-.no_outsw_4:	movs	r2, r2, lsl #31
-		bcc	.no_outsw_2
+.Lno_outsw_4:	movs	r2, r2, lsl #31
+		bcc	.Lno_outsw_2

 		ldr	r3, [r1], #4
 		outword	r3

-.no_outsw_2:	ldrneh	r3, [r1]
+.Lno_outsw_2:	ldrneh	r3, [r1]
 		strneh	r3, [r0]

 		ldmfd	sp!, {r4, r5, pc}
@ -74,7 +74,8 @@ ENTRY(__raw_writesw)
 #define push_hbyte1	lsl #8
 #endif

-.outsw_noalign:	ldr	r3, [r1, -r3]!
+.Loutsw_noalign:
+		ldr	r3, [r1, -r3]!
 		subcs	r2, r2, #1
 		bcs	2f
 		subs	r2, r2, #2
--- a/arch/arm/lib/uaccess.S
+++ b/arch/arm/lib/uaccess.S
@ -27,7 +27,7 @@
 * Returns  : Number of bytes NOT copied.
 */

-.c2u_dest_not_aligned:
+.Lc2u_dest_not_aligned:
 		rsb	ip, ip, #4
 		cmp	ip, #2
 		ldrb	r3, [r1], #1
@ -37,32 +37,32 @@ USER(		strgebt	r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #1
 USER(		strgtbt	r3, [r0], #1)			@ May fault
 		sub	r2, r2, ip
-		b	.c2u_dest_aligned
+		b	.Lc2u_dest_aligned

 ENTRY(__arch_copy_to_user)
 		stmfd	sp!, {r2, r4 - r7, lr}
 		cmp	r2, #4
-		blt	.c2u_not_enough
+		blt	.Lc2u_not_enough
 		ands	ip, r0, #3
-		bne	.c2u_dest_not_aligned
-.c2u_dest_aligned:
+		bne	.Lc2u_dest_not_aligned
+.Lc2u_dest_aligned:

 		ands	ip, r1, #3
-		bne	.c2u_src_not_aligned
+		bne	.Lc2u_src_not_aligned
 /*
 * Seeing as there has to be at least 8 bytes to copy, we can
 * copy one word, and force a user-mode page fault...
 */

-.c2u_0fupi:	subs	r2, r2, #4
+.Lc2u_0fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
-		bmi	.c2u_0nowords
+		bmi	.Lc2u_0nowords
 		ldr	r3, [r1], #4
 USER(		strt	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.c2u_0fupi
+		beq	.Lc2u_0fupi
 /*
 * ip = max no. of bytes to copy before needing another "strt" insn
 */
@ -70,16 +70,16 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		movlt	ip, r2
 		sub	r2, r2, ip
 		subs	ip, ip, #32
-		blt	.c2u_0rem8lp
+		blt	.Lc2u_0rem8lp

-.c2u_0cpy8lp:	ldmia	r1!, {r3 - r6}
+.Lc2u_0cpy8lp:	ldmia	r1!, {r3 - r6}
 		stmia	r0!, {r3 - r6}			@ Shouldnt fault
 		ldmia	r1!, {r3 - r6}
 		subs	ip, ip, #32
 		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.c2u_0cpy8lp
+		bpl	.Lc2u_0cpy8lp

-.c2u_0rem8lp:	cmn	ip, #16
+.Lc2u_0rem8lp:	cmn	ip, #16
 		ldmgeia	r1!, {r3 - r6}
 		stmgeia	r0!, {r3 - r6}			@ Shouldnt fault
 		tst	ip, #8
@ -89,33 +89,33 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		ldrne	r3, [r1], #4
 		strnet	r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
-		beq	.c2u_0fupi
-.c2u_0nowords:	teq	ip, #0
-		beq	.c2u_finished
-.c2u_nowords:	cmp	ip, #2
+		beq	.Lc2u_0fupi
+.Lc2u_0nowords:	teq	ip, #0
+		beq	.Lc2u_finished
+.Lc2u_nowords:	cmp	ip, #2
 		ldrb	r3, [r1], #1
 USER(		strbt	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
 USER(		strgebt	r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #1
 USER(		strgtbt	r3, [r0], #1)			@ May fault
-		b	.c2u_finished
+		b	.Lc2u_finished

-.c2u_not_enough:
+.Lc2u_not_enough:
 		movs	ip, r2
-		bne	.c2u_nowords
-.c2u_finished:	mov	r0, #0
+		bne	.Lc2u_nowords
+.Lc2u_finished:	mov	r0, #0
 		LOADREGS(fd,sp!,{r2, r4 - r7, pc})

-.c2u_src_not_aligned:
+.Lc2u_src_not_aligned:
 		bic	r1, r1, #3
 		ldr	r7, [r1], #4
 		cmp	ip, #2
-		bgt	.c2u_3fupi
-		beq	.c2u_2fupi
-.c2u_1fupi:	subs	r2, r2, #4
+		bgt	.Lc2u_3fupi
+		beq	.Lc2u_2fupi
+.Lc2u_1fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
-		bmi	.c2u_1nowords
+		bmi	.Lc2u_1nowords
 		mov	r3, r7, pull #8
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #24
@ -123,14 +123,14 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.c2u_1fupi
+		beq	.Lc2u_1fupi
 		cmp	r2, ip
 		movlt	ip, r2
 		sub	r2, r2, ip
 		subs	ip, ip, #16
-		blt	.c2u_1rem8lp
+		blt	.Lc2u_1rem8lp

-.c2u_1cpy8lp:	mov	r3, r7, pull #8
+.Lc2u_1cpy8lp:	mov	r3, r7, pull #8
 		ldmia	r1!, {r4 - r7}
 		subs	ip, ip, #16
 		orr	r3, r3, r4, push #24
@ -141,9 +141,9 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		mov	r6, r6, pull #8
 		orr	r6, r6, r7, push #24
 		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.c2u_1cpy8lp
+		bpl	.Lc2u_1cpy8lp

-.c2u_1rem8lp:	tst	ip, #8
+.Lc2u_1rem8lp:	tst	ip, #8
 		movne	r3, r7, pull #8
 		ldmneia	r1!, {r4, r7}
 		orrne	r3, r3, r4, push #24
@ -156,21 +156,21 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		orrne	r3, r3, r7, push #24
 		strnet	r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
-		beq	.c2u_1fupi
-.c2u_1nowords:	mov	r3, r7, get_byte_1
+		beq	.Lc2u_1fupi
+.Lc2u_1nowords:	mov	r3, r7, get_byte_1
 		teq	ip, #0
-		beq	.c2u_finished
+		beq	.Lc2u_finished
 		cmp	ip, #2
 USER(		strbt	r3, [r0], #1)			@ May fault
 		movge	r3, r7, get_byte_2
 USER(		strgebt	r3, [r0], #1)			@ May fault
 		movgt	r3, r7, get_byte_3
 USER(		strgtbt	r3, [r0], #1)			@ May fault
-		b	.c2u_finished
+		b	.Lc2u_finished

-.c2u_2fupi:	subs	r2, r2, #4
+.Lc2u_2fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
-		bmi	.c2u_2nowords
+		bmi	.Lc2u_2nowords
 		mov	r3, r7, pull #16
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #16
@ -178,14 +178,14 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.c2u_2fupi
+		beq	.Lc2u_2fupi
 		cmp	r2, ip
 		movlt	ip, r2
 		sub	r2, r2, ip
 		subs	ip, ip, #16
-		blt	.c2u_2rem8lp
+		blt	.Lc2u_2rem8lp

-.c2u_2cpy8lp:	mov	r3, r7, pull #16
+.Lc2u_2cpy8lp:	mov	r3, r7, pull #16
 		ldmia	r1!, {r4 - r7}
 		subs	ip, ip, #16
 		orr	r3, r3, r4, push #16
@ -196,9 +196,9 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		mov	r6, r6, pull #16
 		orr	r6, r6, r7, push #16
 		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.c2u_2cpy8lp
+		bpl	.Lc2u_2cpy8lp

-.c2u_2rem8lp:	tst	ip, #8
+.Lc2u_2rem8lp:	tst	ip, #8
 		movne	r3, r7, pull #16
 		ldmneia	r1!, {r4, r7}
 		orrne	r3, r3, r4, push #16
@ -211,21 +211,21 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		orrne	r3, r3, r7, push #16
 		strnet	r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
-		beq	.c2u_2fupi
-.c2u_2nowords:	mov	r3, r7, get_byte_2
+		beq	.Lc2u_2fupi
+.Lc2u_2nowords:	mov	r3, r7, get_byte_2
 		teq	ip, #0
-		beq	.c2u_finished
+		beq	.Lc2u_finished
 		cmp	ip, #2
 USER(		strbt	r3, [r0], #1)			@ May fault
 		movge	r3, r7, get_byte_3
 USER(		strgebt	r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #0
 USER(		strgtbt	r3, [r0], #1)			@ May fault
-		b	.c2u_finished
+		b	.Lc2u_finished

-.c2u_3fupi:	subs	r2, r2, #4
+.Lc2u_3fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
-		bmi	.c2u_3nowords
+		bmi	.Lc2u_3nowords
 		mov	r3, r7, pull #24
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #8
@ -233,14 +233,14 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.c2u_3fupi
+		beq	.Lc2u_3fupi
 		cmp	r2, ip
 		movlt	ip, r2
 		sub	r2, r2, ip
 		subs	ip, ip, #16
-		blt	.c2u_3rem8lp
+		blt	.Lc2u_3rem8lp

-.c2u_3cpy8lp:	mov	r3, r7, pull #24
+.Lc2u_3cpy8lp:	mov	r3, r7, pull #24
 		ldmia	r1!, {r4 - r7}
 		subs	ip, ip, #16
 		orr	r3, r3, r4, push #8
@ -251,9 +251,9 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		mov	r6, r6, pull #24
 		orr	r6, r6, r7, push #8
 		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.c2u_3cpy8lp
+		bpl	.Lc2u_3cpy8lp

-.c2u_3rem8lp:	tst	ip, #8
+.Lc2u_3rem8lp:	tst	ip, #8
 		movne	r3, r7, pull #24
 		ldmneia	r1!, {r4, r7}
 		orrne	r3, r3, r4, push #8
@ -266,17 +266,17 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		orrne	r3, r3, r7, push #8
 		strnet	r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
-		beq	.c2u_3fupi
-.c2u_3nowords:	mov	r3, r7, get_byte_3
+		beq	.Lc2u_3fupi
+.Lc2u_3nowords:	mov	r3, r7, get_byte_3
 		teq	ip, #0
-		beq	.c2u_finished
+		beq	.Lc2u_finished
 		cmp	ip, #2
 USER(		strbt	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
 USER(		strgebt	r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #0
 USER(		strgtbt	r3, [r0], #1)			@ May fault
-		b	.c2u_finished
+		b	.Lc2u_finished

 		.section .fixup,"ax"
 		.align	0
@ -290,7 +290,7 @@ USER(		strgtbt	r3, [r0], #1)			@ May fault
 *          : n    - number of bytes to copy
 * Returns  : Number of bytes NOT copied.
 */
-.cfu_dest_not_aligned:
+.Lcfu_dest_not_aligned:
 		rsb	ip, ip, #4
 		cmp	ip, #2
 USER(		ldrbt	r3, [r1], #1)			@ May fault
@ -300,31 +300,32 @@ USER(		ldrgebt	r3, [r1], #1)			@ May fault
 USER(		ldrgtbt	r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		sub	r2, r2, ip
-		b	.cfu_dest_aligned
+		b	.Lcfu_dest_aligned

 ENTRY(__arch_copy_from_user)
 		stmfd	sp!, {r0, r2, r4 - r7, lr}
 		cmp	r2, #4
-		blt	.cfu_not_enough
+		blt	.Lcfu_not_enough
 		ands	ip, r0, #3
-		bne	.cfu_dest_not_aligned
-.cfu_dest_aligned:
+		bne	.Lcfu_dest_not_aligned
+.Lcfu_dest_aligned:
 		ands	ip, r1, #3
-		bne	.cfu_src_not_aligned
+		bne	.Lcfu_src_not_aligned
+
 /*
 * Seeing as there has to be at least 8 bytes to copy, we can
 * copy one word, and force a user-mode page fault...
 */

-.cfu_0fupi:	subs	r2, r2, #4
+.Lcfu_0fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
-		bmi	.cfu_0nowords
+		bmi	.Lcfu_0nowords
 USER(		ldrt	r3, [r1], #4)
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.cfu_0fupi
+		beq	.Lcfu_0fupi
 /*
 * ip = max no. of bytes to copy before needing another "strt" insn
 */
@ -332,16 +333,16 @@ USER(		ldrt	r3, [r1], #4)
 		movlt	ip, r2
 		sub	r2, r2, ip
 		subs	ip, ip, #32
-		blt	.cfu_0rem8lp
+		blt	.Lcfu_0rem8lp

-.cfu_0cpy8lp:	ldmia	r1!, {r3 - r6}			@ Shouldnt fault
+.Lcfu_0cpy8lp:	ldmia	r1!, {r3 - r6}			@ Shouldnt fault
 		stmia	r0!, {r3 - r6}
 		ldmia	r1!, {r3 - r6}			@ Shouldnt fault
 		subs	ip, ip, #32
 		stmia	r0!, {r3 - r6}
-		bpl	.cfu_0cpy8lp
+		bpl	.Lcfu_0cpy8lp

-.cfu_0rem8lp:	cmn	ip, #16
+.Lcfu_0rem8lp:	cmn	ip, #16
 		ldmgeia	r1!, {r3 - r6}			@ Shouldnt fault
 		stmgeia	r0!, {r3 - r6}
 		tst	ip, #8
@ -351,34 +352,34 @@ USER(		ldrt	r3, [r1], #4)
 		ldrnet	r3, [r1], #4			@ Shouldnt fault
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
-		beq	.cfu_0fupi
-.cfu_0nowords:	teq	ip, #0
-		beq	.cfu_finished
-.cfu_nowords:	cmp	ip, #2
+		beq	.Lcfu_0fupi
+.Lcfu_0nowords:	teq	ip, #0
+		beq	.Lcfu_finished
+.Lcfu_nowords:	cmp	ip, #2
 USER(		ldrbt	r3, [r1], #1)			@ May fault
 		strb	r3, [r0], #1
 USER(		ldrgebt	r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
 USER(		ldrgtbt	r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
-		b	.cfu_finished
+		b	.Lcfu_finished

-.cfu_not_enough:
+.Lcfu_not_enough:
 		movs	ip, r2
-		bne	.cfu_nowords
-.cfu_finished:	mov	r0, #0
+		bne	.Lcfu_nowords
+.Lcfu_finished:	mov	r0, #0
 		add	sp, sp, #8
 		LOADREGS(fd,sp!,{r4 - r7, pc})

-.cfu_src_not_aligned:
+.Lcfu_src_not_aligned:
 		bic	r1, r1, #3
 USER(		ldrt	r7, [r1], #4)			@ May fault
 		cmp	ip, #2
-		bgt	.cfu_3fupi
-		beq	.cfu_2fupi
-.cfu_1fupi:	subs	r2, r2, #4
+		bgt	.Lcfu_3fupi
+		beq	.Lcfu_2fupi
+.Lcfu_1fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
-		bmi	.cfu_1nowords
+		bmi	.Lcfu_1nowords
 		mov	r3, r7, pull #8
 USER(		ldrt	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #24
@ -386,14 +387,14 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.cfu_1fupi
+		beq	.Lcfu_1fupi
 		cmp	r2, ip
 		movlt	ip, r2
 		sub	r2, r2, ip
 		subs	ip, ip, #16
-		blt	.cfu_1rem8lp
+		blt	.Lcfu_1rem8lp

-.cfu_1cpy8lp:	mov	r3, r7, pull #8
+.Lcfu_1cpy8lp:	mov	r3, r7, pull #8
 		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
 		subs	ip, ip, #16
 		orr	r3, r3, r4, push #24
@ -404,9 +405,9 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		mov	r6, r6, pull #8
 		orr	r6, r6, r7, push #24
 		stmia	r0!, {r3 - r6}
-		bpl	.cfu_1cpy8lp
+		bpl	.Lcfu_1cpy8lp

-.cfu_1rem8lp:	tst	ip, #8
+.Lcfu_1rem8lp:	tst	ip, #8
 		movne	r3, r7, pull #8
 		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
 		orrne	r3, r3, r4, push #24
@ -419,21 +420,21 @@ USER(		ldrnet	r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #24
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
-		beq	.cfu_1fupi
-.cfu_1nowords:	mov	r3, r7, get_byte_1
+		beq	.Lcfu_1fupi
+.Lcfu_1nowords:	mov	r3, r7, get_byte_1
 		teq	ip, #0
-		beq	.cfu_finished
+		beq	.Lcfu_finished
 		cmp	ip, #2
 		strb	r3, [r0], #1
 		movge	r3, r7, get_byte_2
 		strgeb	r3, [r0], #1
 		movgt	r3, r7, get_byte_3
 		strgtb	r3, [r0], #1
-		b	.cfu_finished
+		b	.Lcfu_finished

-.cfu_2fupi:	subs	r2, r2, #4
+.Lcfu_2fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
-		bmi	.cfu_2nowords
+		bmi	.Lcfu_2nowords
 		mov	r3, r7, pull #16
 USER(		ldrt	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #16
@ -441,14 +442,15 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.cfu_2fupi
+		beq	.Lcfu_2fupi
 		cmp	r2, ip
 		movlt	ip, r2
 		sub	r2, r2, ip
 		subs	ip, ip, #16
-		blt	.cfu_2rem8lp
+		blt	.Lcfu_2rem8lp

-.cfu_2cpy8lp:	mov	r3, r7, pull #16
+
+.Lcfu_2cpy8lp:	mov	r3, r7, pull #16
 		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
 		subs	ip, ip, #16
 		orr	r3, r3, r4, push #16
@ -459,9 +461,9 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		mov	r6, r6, pull #16
 		orr	r6, r6, r7, push #16
 		stmia	r0!, {r3 - r6}
-		bpl	.cfu_2cpy8lp
+		bpl	.Lcfu_2cpy8lp

-.cfu_2rem8lp:	tst	ip, #8
+.Lcfu_2rem8lp:	tst	ip, #8
 		movne	r3, r7, pull #16
 		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
 		orrne	r3, r3, r4, push #16
@ -474,21 +476,21 @@ USER(		ldrnet	r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #16
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
-		beq	.cfu_2fupi
-.cfu_2nowords:	mov	r3, r7, get_byte_2
+		beq	.Lcfu_2fupi
+.Lcfu_2nowords:	mov	r3, r7, get_byte_2
 		teq	ip, #0
-		beq	.cfu_finished
+		beq	.Lcfu_finished
 		cmp	ip, #2
 		strb	r3, [r0], #1
 		movge	r3, r7, get_byte_3
 		strgeb	r3, [r0], #1
 USER(		ldrgtbt	r3, [r1], #0)			@ May fault
 		strgtb	r3, [r0], #1
-		b	.cfu_finished
+		b	.Lcfu_finished

-.cfu_3fupi:	subs	r2, r2, #4
+.Lcfu_3fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
-		bmi	.cfu_3nowords
+		bmi	.Lcfu_3nowords
 		mov	r3, r7, pull #24
 USER(		ldrt	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #8
@ -496,14 +498,14 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.cfu_3fupi
+		beq	.Lcfu_3fupi
 		cmp	r2, ip
 		movlt	ip, r2
 		sub	r2, r2, ip
 		subs	ip, ip, #16
-		blt	.cfu_3rem8lp
+		blt	.Lcfu_3rem8lp

-.cfu_3cpy8lp:	mov	r3, r7, pull #24
+.Lcfu_3cpy8lp:	mov	r3, r7, pull #24
 		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
 		orr	r3, r3, r4, push #8
 		mov	r4, r4, pull #24
@ -514,9 +516,9 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		orr	r6, r6, r7, push #8
 		stmia	r0!, {r3 - r6}
 		subs	ip, ip, #16
-		bpl	.cfu_3cpy8lp
+		bpl	.Lcfu_3cpy8lp

-.cfu_3rem8lp:	tst	ip, #8
+.Lcfu_3rem8lp:	tst	ip, #8
 		movne	r3, r7, pull #24
 		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
 		orrne	r3, r3, r4, push #8
@ -529,17 +531,17 @@ USER(		ldrnet	r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #8
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
-		beq	.cfu_3fupi
-.cfu_3nowords:	mov	r3, r7, get_byte_3
+		beq	.Lcfu_3fupi
+.Lcfu_3nowords:	mov	r3, r7, get_byte_3
 		teq	ip, #0
-		beq	.cfu_finished
+		beq	.Lcfu_finished
 		cmp	ip, #2
 		strb	r3, [r0], #1
 USER(		ldrgebt	r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
 USER(		ldrgtbt	r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
-		b	.cfu_finished
+		b	.Lcfu_finished

 		.section .fixup,"ax"
 		.align	0
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Mon Oct 10 09:46:25 2005
+# Last update: Fri Nov 11 21:55:04 2005
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@ -460,7 +460,7 @@ esl_sarva		MACH_ESL_SARVA		ESL_SARVA		443
 xm250			MACH_XM250		XM250			444
 t6tc1xb			MACH_T6TC1XB		T6TC1XB			445
 ess710			MACH_ESS710		ESS710			446
-mx31ads			MACH_MX3ADS		MX3ADS			447
+mx31ads			MACH_MX31ADS		MX31ADS			447
 himalaya		MACH_HIMALAYA		HIMALAYA		448
 bolfenk			MACH_BOLFENK		BOLFENK			449
 at91rm9200kr		MACH_AT91RM9200KR	AT91RM9200KR		450
@ -802,7 +802,7 @@ cpuat91			MACH_CPUAT91		CPUAT91			787
 rea9200			MACH_REA9200		REA9200			788
 acts_pune_sa1110	MACH_ACTS_PUNE_SA1110	ACTS_PUNE_SA1110	789
 ixp425			MACH_IXP425		IXP425			790
-argonplusodyssey	MACH_ODYSSEY		ODYSSEY			791
+argonplusodyssey	MACH_ARGONPLUSODYSSEY	ARGONPLUSODYSSEY	791
 perch			MACH_PERCH		PERCH			792
 eis05r1			MACH_EIS05R1		EIS05R1			793
 pepperpad		MACH_PEPPERPAD		PEPPERPAD		794
@ -816,7 +816,7 @@ iq_nextgen_c		MACH_IQ_NEXTGEN_C	IQ_NEXTGEN_C		801
 iq_nextgen_d		MACH_IQ_NEXTGEN_D	IQ_NEXTGEN_D		802
 iq_nextgen_e		MACH_IQ_NEXTGEN_E	IQ_NEXTGEN_E		803
 mallow_at91		MACH_MALLOW_AT91	MALLOW_AT91		804
-cybertracker		MACH_CYBERTRACKER	CYBERTRACKER		805
+cybertracker_i		MACH_CYBERTRACKER_I	CYBERTRACKER_I		805
 gesbc931x		MACH_GESBC931X		GESBC931X		806
 centipad		MACH_CENTIPAD		CENTIPAD		807
 armsoc			MACH_ARMSOC		ARMSOC			808
@ -869,3 +869,38 @@ davinci_dvdp		MACH_DAVINCI_DVDP	DAVINCI_DVDP		854
 htcuniversal		MACH_HTCUNIVERSAL	HTCUNIVERSAL		855
 tpad			MACH_TPAD		TPAD			856
 roverp3			MACH_ROVERP3		ROVERP3			857
+jornada928		MACH_JORNADA928		JORNADA928		858
+mv88fxx81		MACH_MV88FXX81		MV88FXX81		859
+stmp36xx		MACH_STMP36XX		STMP36XX		860
+sxni79524		MACH_SXNI79524		SXNI79524		861
+ams_delta		MACH_AMS_DELTA		AMS_DELTA		862
+uranium			MACH_URANIUM		URANIUM			863
+ucon			MACH_UCON		UCON			864
+nas100d			MACH_NAS100D		NAS100D			865
+l083			MACH_L083_1000		L083_1000		866
+ezx			MACH_EZX		EZX			867
+pnx5220			MACH_PNX5220		PNX5220			868
+butte			MACH_BUTTE		BUTTE			869
+srm2			MACH_SRM2		SRM2			870
+dsbr			MACH_DSBR		DSBR			871
+crystalball		MACH_CRYSTALBALL	CRYSTALBALL		872
+tinypxa27x		MACH_TINYPXA27X		TINYPXA27X		873
+herbie			MACH_HERBIE		HERBIE			874
+magician		MACH_MAGICIAN		MAGICIAN		875
+cm4002			MACH_CM4002		CM4002			876
+b4			MACH_B4			B4			877
+maui			MACH_MAUI		MAUI			878
+cybertracker_g		MACH_CYBERTRACKER_G	CYBERTRACKER_G		879
+nxdkn			MACH_NXDKN		NXDKN			880
+mio8390			MACH_MIO8390		MIO8390			881
+omi_board		MACH_OMI_BOARD		OMI_BOARD		882
+mx21civ			MACH_MX21CIV		MX21CIV			883
+mahi_cdac		MACH_MAHI_CDAC		MAHI_CDAC		884
+xscale_palmtx		MACH_XSCALE_PALMTX	XSCALE_PALMTX		885
+arch_s3c2413		MACH_ARCH_S3C2413	ARCH_S3C2413		886
+s3c2413			MACH_S3C2413		S3C2413			887
+samsys_ep0		MACH_SAMSYS_EP0		SAMSYS_EP0		888
+wg302v1			MACH_WG302V1		WG302V1			889
+wg302v2			MACH_WG302V2		WG302V2			890
+eb42x			MACH_EB42X		EB42X			891
+iq331es			MACH_IQ331ES		IQ331ES			892