mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-16 00:06:46 +07:00
power: supply: Add driver for Microchip UCS1002
Add driver for Microchip UCS1002 Programmable USB Port Power Controller with Charger Emulation. The driver exposed a power supply device to control/monitor various parameter of the device as well as a regulator to allow controlling VBUS line. Signed-off-by: Enric Balletbo Serra <enric.balletbo@collabora.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-kernel@vger.kernel.org Cc: linux-pm@vger.kernel.org Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This commit is contained in:
Andrey Smirnov
Sebastian Reichel
parent
7df8f2d00d
commit
9a2688e426
@ -671,4 +671,13 @@ config FUEL_GAUGE_SC27XX
|
|||||||
Say Y here to enable support for fuel gauge with SC27XX
|
Say Y here to enable support for fuel gauge with SC27XX
|
||||||
PMIC chips.
|
PMIC chips.
|
||||||
|
|
||||||
|
config CHARGER_UCS1002
|
||||||
|
tristate "Microchip UCS1002 USB Port Power Controller"
|
||||||
|
depends on I2C
|
||||||
|
depends on OF
|
||||||
|
select REGMAP_I2C
|
||||||
|
help
|
||||||
|
Say Y to enable support for Microchip UCS1002 Programmable
|
||||||
|
USB Port Power Controller with Charger Emulation.
|
||||||
|
|
||||||
endif # POWER_SUPPLY
|
endif # POWER_SUPPLY
|
||||||
|
|||||||
@ -88,3 +88,4 @@ obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o
|
|||||||
obj-$(CONFIG_CHARGER_CROS_USBPD) += cros_usbpd-charger.o
|
obj-$(CONFIG_CHARGER_CROS_USBPD) += cros_usbpd-charger.o
|
||||||
obj-$(CONFIG_CHARGER_SC2731) += sc2731_charger.o
|
obj-$(CONFIG_CHARGER_SC2731) += sc2731_charger.o
|
||||||
obj-$(CONFIG_FUEL_GAUGE_SC27XX) += sc27xx_fuel_gauge.o
|
obj-$(CONFIG_FUEL_GAUGE_SC27XX) += sc27xx_fuel_gauge.o
|
||||||
|
obj-$(CONFIG_CHARGER_UCS1002) += ucs1002_power.o
|
||||||
|
|||||||
646
drivers/power/supply/ucs1002_power.c
Normal file
646
drivers/power/supply/ucs1002_power.c
Normal file
@ -0,0 +1,646 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0+
|
||||||
|
/*
|
||||||
|
* Driver for UCS1002 Programmable USB Port Power Controller
|
||||||
|
*
|
||||||
|
* Copyright (C) 2019 Zodiac Inflight Innovations
|
||||||
|
*/
|
||||||
|
#include <linux/bits.h>
|
||||||
|
#include <linux/freezer.h>
|
||||||
|
#include <linux/gpio/consumer.h>
|
||||||
|
#include <linux/i2c.h>
|
||||||
|
#include <linux/interrupt.h>
|
||||||
|
#include <linux/kernel.h>
|
||||||
|
#include <linux/kthread.h>
|
||||||
|
#include <linux/device.h>
|
||||||
|
#include <linux/module.h>
|
||||||
|
#include <linux/of.h>
|
||||||
|
#include <linux/of_irq.h>
|
||||||
|
#include <linux/power_supply.h>
|
||||||
|
#include <linux/regmap.h>
|
||||||
|
#include <linux/regulator/driver.h>
|
||||||
|
#include <linux/regulator/of_regulator.h>
|
||||||
|
|
||||||
|
/* UCS1002 Registers */
|
||||||
|
#define UCS1002_REG_CURRENT_MEASUREMENT 0x00
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The Total Accumulated Charge registers store the total accumulated
|
||||||
|
* charge delivered from the VS source to a portable device. The total
|
||||||
|
* value is calculated using four registers, from 01h to 04h. The bit
|
||||||
|
* weighting of the registers is given in mA/hrs.
|
||||||
|
*/
|
||||||
|
#define UCS1002_REG_TOTAL_ACC_CHARGE 0x01
|
||||||
|
|
||||||
|
/* Other Status Register */
|
||||||
|
#define UCS1002_REG_OTHER_STATUS 0x0f
|
||||||
|
# define F_ADET_PIN BIT(4)
|
||||||
|
# define F_CHG_ACT BIT(3)
|
||||||
|
|
||||||
|
/* Interrupt Status */
|
||||||
|
#define UCS1002_REG_INTERRUPT_STATUS 0x10
|
||||||
|
# define F_DISCHARGE_ERR BIT(6)
|
||||||
|
# define F_RESET BIT(5)
|
||||||
|
# define F_MIN_KEEP_OUT BIT(4)
|
||||||
|
# define F_TSD BIT(3)
|
||||||
|
# define F_OVER_VOLT BIT(2)
|
||||||
|
# define F_BACK_VOLT BIT(1)
|
||||||
|
# define F_OVER_ILIM BIT(0)
|
||||||
|
|
||||||
|
/* Pin Status Register */
|
||||||
|
#define UCS1002_REG_PIN_STATUS 0x14
|
||||||
|
# define UCS1002_PWR_STATE_MASK 0x03
|
||||||
|
# define F_PWR_EN_PIN BIT(6)
|
||||||
|
# define F_M2_PIN BIT(5)
|
||||||
|
# define F_M1_PIN BIT(4)
|
||||||
|
# define F_EM_EN_PIN BIT(3)
|
||||||
|
# define F_SEL_PIN BIT(2)
|
||||||
|
# define F_ACTIVE_MODE_MASK GENMASK(5, 3)
|
||||||
|
# define F_ACTIVE_MODE_PASSTHROUGH F_M2_PIN
|
||||||
|
# define F_ACTIVE_MODE_DEDICATED F_EM_EN_PIN
|
||||||
|
# define F_ACTIVE_MODE_BC12_DCP (F_M2_PIN | F_EM_EN_PIN)
|
||||||
|
# define F_ACTIVE_MODE_BC12_SDP F_M1_PIN
|
||||||
|
# define F_ACTIVE_MODE_BC12_CDP (F_M1_PIN | F_M2_PIN | F_EM_EN_PIN)
|
||||||
|
|
||||||
|
/* General Configuration Register */
|
||||||
|
#define UCS1002_REG_GENERAL_CFG 0x15
|
||||||
|
# define F_RATION_EN BIT(3)
|
||||||
|
|
||||||
|
/* Emulation Configuration Register */
|
||||||
|
#define UCS1002_REG_EMU_CFG 0x16
|
||||||
|
|
||||||
|
/* Switch Configuration Register */
|
||||||
|
#define UCS1002_REG_SWITCH_CFG 0x17
|
||||||
|
# define F_PIN_IGNORE BIT(7)
|
||||||
|
# define F_EM_EN_SET BIT(5)
|
||||||
|
# define F_M2_SET BIT(4)
|
||||||
|
# define F_M1_SET BIT(3)
|
||||||
|
# define F_S0_SET BIT(2)
|
||||||
|
# define F_PWR_EN_SET BIT(1)
|
||||||
|
# define F_LATCH_SET BIT(0)
|
||||||
|
# define V_SET_ACTIVE_MODE_MASK GENMASK(5, 3)
|
||||||
|
# define V_SET_ACTIVE_MODE_PASSTHROUGH F_M2_SET
|
||||||
|
# define V_SET_ACTIVE_MODE_DEDICATED F_EM_EN_SET
|
||||||
|
# define V_SET_ACTIVE_MODE_BC12_DCP (F_M2_SET | F_EM_EN_SET)
|
||||||
|
# define V_SET_ACTIVE_MODE_BC12_SDP F_M1_SET
|
||||||
|
# define V_SET_ACTIVE_MODE_BC12_CDP (F_M1_SET | F_M2_SET | F_EM_EN_SET)
|
||||||
|
|
||||||
|
/* Current Limit Register */
|
||||||
|
#define UCS1002_REG_ILIMIT 0x19
|
||||||
|
# define UCS1002_ILIM_SW_MASK GENMASK(3, 0)
|
||||||
|
|
||||||
|
/* Product ID */
|
||||||
|
#define UCS1002_REG_PRODUCT_ID 0xfd
|
||||||
|
# define UCS1002_PRODUCT_ID 0x4e
|
||||||
|
|
||||||
|
/* Manufacture name */
|
||||||
|
#define UCS1002_MANUFACTURER "SMSC"
|
||||||
|
|
||||||
|
struct ucs1002_info {
|
||||||
|
struct power_supply *charger;
|
||||||
|
struct i2c_client *client;
|
||||||
|
struct regmap *regmap;
|
||||||
|
struct regulator_desc *regulator_descriptor;
|
||||||
|
bool present;
|
||||||
|
};
|
||||||
|
|
||||||
|
static enum power_supply_property ucs1002_props[] = {
|
||||||
|
POWER_SUPPLY_PROP_ONLINE,
|
||||||
|
POWER_SUPPLY_PROP_CHARGE_NOW,
|
||||||
|
POWER_SUPPLY_PROP_CURRENT_NOW,
|
||||||
|
POWER_SUPPLY_PROP_CURRENT_MAX,
|
||||||
|
POWER_SUPPLY_PROP_PRESENT, /* the presence of PED */
|
||||||
|
POWER_SUPPLY_PROP_MANUFACTURER,
|
||||||
|
POWER_SUPPLY_PROP_USB_TYPE,
|
||||||
|
POWER_SUPPLY_PROP_HEALTH,
|
||||||
|
};
|
||||||
|
|
||||||
|
static int ucs1002_get_online(struct ucs1002_info *info,
|
||||||
|
union power_supply_propval *val)
|
||||||
|
{
|
||||||
|
unsigned int reg;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = regmap_read(info->regmap, UCS1002_REG_OTHER_STATUS, ®);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
val->intval = !!(reg & F_CHG_ACT);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ucs1002_get_charge(struct ucs1002_info *info,
|
||||||
|
union power_supply_propval *val)
|
||||||
|
{
|
||||||
|
/*
|
||||||
|
* To fit within 32 bits some values are rounded (uA/h)
|
||||||
|
*
|
||||||
|
* For Total Accumulated Charge Middle Low Byte register, addr
|
||||||
|
* 03h, byte 2
|
||||||
|
*
|
||||||
|
* B0: 0.01084 mA/h rounded to 11 uA/h
|
||||||
|
* B1: 0.02169 mA/h rounded to 22 uA/h
|
||||||
|
* B2: 0.04340 mA/h rounded to 43 uA/h
|
||||||
|
* B3: 0.08676 mA/h rounded to 87 uA/h
|
||||||
|
* B4: 0.17350 mA/h rounded to 173 uÁ/h
|
||||||
|
*
|
||||||
|
* For Total Accumulated Charge Low Byte register, addr 04h,
|
||||||
|
* byte 3
|
||||||
|
*
|
||||||
|
* B6: 0.00271 mA/h rounded to 3 uA/h
|
||||||
|
* B7: 0.005422 mA/h rounded to 5 uA/h
|
||||||
|
*/
|
||||||
|
static const int bit_weights_uAh[BITS_PER_TYPE(u32)] = {
|
||||||
|
/*
|
||||||
|
* Bit corresponding to low byte (offset 0x04)
|
||||||
|
* B0 B1 B2 B3 B4 B5 B6 B7
|
||||||
|
*/
|
||||||
|
0, 0, 0, 0, 0, 0, 3, 5,
|
||||||
|
/*
|
||||||
|
* Bit corresponding to middle low byte (offset 0x03)
|
||||||
|
* B0 B1 B2 B3 B4 B5 B6 B7
|
||||||
|
*/
|
||||||
|
11, 22, 43, 87, 173, 347, 694, 1388,
|
||||||
|
/*
|
||||||
|
* Bit corresponding to middle high byte (offset 0x02)
|
||||||
|
* B0 B1 B2 B3 B4 B5 B6 B7
|
||||||
|
*/
|
||||||
|
2776, 5552, 11105, 22210, 44420, 88840, 177700, 355400,
|
||||||
|
/*
|
||||||
|
* Bit corresponding to high byte (offset 0x01)
|
||||||
|
* B0 B1 B2 B3 B4 B5 B6 B7
|
||||||
|
*/
|
||||||
|
710700, 1421000, 2843000, 5685000, 11371000, 22742000,
|
||||||
|
45484000, 90968000,
|
||||||
|
};
|
||||||
|
unsigned long total_acc_charger;
|
||||||
|
unsigned int reg;
|
||||||
|
int i, ret;
|
||||||
|
|
||||||
|
ret = regmap_bulk_read(info->regmap, UCS1002_REG_TOTAL_ACC_CHARGE,
|
||||||
|
®, sizeof(u32));
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
total_acc_charger = be32_to_cpu(reg); /* BE as per offsets above */
|
||||||
|
val->intval = 0;
|
||||||
|
|
||||||
|
for_each_set_bit(i, &total_acc_charger, ARRAY_SIZE(bit_weights_uAh))
|
||||||
|
val->intval += bit_weights_uAh[i];
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ucs1002_get_current(struct ucs1002_info *info,
|
||||||
|
union power_supply_propval *val)
|
||||||
|
{
|
||||||
|
/*
|
||||||
|
* The Current Measurement register stores the measured
|
||||||
|
* current value delivered to the portable device. The range
|
||||||
|
* is from 9.76 mA to 2.5 A.
|
||||||
|
*/
|
||||||
|
static const int bit_weights_uA[BITS_PER_TYPE(u8)] = {
|
||||||
|
9760, 19500, 39000, 78100, 156200, 312300, 624600, 1249300,
|
||||||
|
};
|
||||||
|
unsigned long current_measurement;
|
||||||
|
unsigned int reg;
|
||||||
|
int i, ret;
|
||||||
|
|
||||||
|
ret = regmap_read(info->regmap, UCS1002_REG_CURRENT_MEASUREMENT, ®);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
current_measurement = reg;
|
||||||
|
val->intval = 0;
|
||||||
|
|
||||||
|
for_each_set_bit(i, ¤t_measurement, ARRAY_SIZE(bit_weights_uA))
|
||||||
|
val->intval += bit_weights_uA[i];
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The Current Limit register stores the maximum current used by the
|
||||||
|
* port switch. The range is from 500mA to 2.5 A.
|
||||||
|
*/
|
||||||
|
static const u32 ucs1002_current_limit_uA[] = {
|
||||||
|
500000, 900000, 1000000, 1200000, 1500000, 1800000, 2000000, 2500000,
|
||||||
|
};
|
||||||
|
|
||||||
|
static int ucs1002_get_max_current(struct ucs1002_info *info,
|
||||||
|
union power_supply_propval *val)
|
||||||
|
{
|
||||||
|
unsigned int reg;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = regmap_read(info->regmap, UCS1002_REG_ILIMIT, ®);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
val->intval = ucs1002_current_limit_uA[reg & UCS1002_ILIM_SW_MASK];
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ucs1002_set_max_current(struct ucs1002_info *info, u32 val)
|
||||||
|
{
|
||||||
|
unsigned int reg;
|
||||||
|
int ret, idx;
|
||||||
|
|
||||||
|
for (idx = 0; idx < ARRAY_SIZE(ucs1002_current_limit_uA); idx++) {
|
||||||
|
if (val == ucs1002_current_limit_uA[idx])
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (idx == ARRAY_SIZE(ucs1002_current_limit_uA))
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
ret = regmap_write(info->regmap, UCS1002_REG_ILIMIT, idx);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
/*
|
||||||
|
* Any current limit setting exceeding the one set via ILIM
|
||||||
|
* pin will be rejected, so we read out freshly changed limit
|
||||||
|
* to make sure that it took effect.
|
||||||
|
*/
|
||||||
|
ret = regmap_read(info->regmap, UCS1002_REG_ILIMIT, ®);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
if (reg != idx)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static enum power_supply_usb_type ucs1002_usb_types[] = {
|
||||||
|
POWER_SUPPLY_USB_TYPE_PD,
|
||||||
|
POWER_SUPPLY_USB_TYPE_SDP,
|
||||||
|
POWER_SUPPLY_USB_TYPE_DCP,
|
||||||
|
POWER_SUPPLY_USB_TYPE_CDP,
|
||||||
|
POWER_SUPPLY_USB_TYPE_UNKNOWN,
|
||||||
|
};
|
||||||
|
|
||||||
|
static int ucs1002_set_usb_type(struct ucs1002_info *info, int val)
|
||||||
|
{
|
||||||
|
unsigned int mode;
|
||||||
|
|
||||||
|
if (val < 0 || val >= ARRAY_SIZE(ucs1002_usb_types))
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
switch (ucs1002_usb_types[val]) {
|
||||||
|
case POWER_SUPPLY_USB_TYPE_PD:
|
||||||
|
mode = V_SET_ACTIVE_MODE_DEDICATED;
|
||||||
|
break;
|
||||||
|
case POWER_SUPPLY_USB_TYPE_SDP:
|
||||||
|
mode = V_SET_ACTIVE_MODE_BC12_SDP;
|
||||||
|
break;
|
||||||
|
case POWER_SUPPLY_USB_TYPE_DCP:
|
||||||
|
mode = V_SET_ACTIVE_MODE_BC12_DCP;
|
||||||
|
break;
|
||||||
|
case POWER_SUPPLY_USB_TYPE_CDP:
|
||||||
|
mode = V_SET_ACTIVE_MODE_BC12_CDP;
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
return regmap_update_bits(info->regmap, UCS1002_REG_SWITCH_CFG,
|
||||||
|
V_SET_ACTIVE_MODE_MASK, mode);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ucs1002_get_usb_type(struct ucs1002_info *info,
|
||||||
|
union power_supply_propval *val)
|
||||||
|
{
|
||||||
|
enum power_supply_usb_type type;
|
||||||
|
unsigned int reg;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = regmap_read(info->regmap, UCS1002_REG_PIN_STATUS, ®);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
switch (reg & F_ACTIVE_MODE_MASK) {
|
||||||
|
default:
|
||||||
|
type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
|
||||||
|
break;
|
||||||
|
case F_ACTIVE_MODE_DEDICATED:
|
||||||
|
type = POWER_SUPPLY_USB_TYPE_PD;
|
||||||
|
break;
|
||||||
|
case F_ACTIVE_MODE_BC12_SDP:
|
||||||
|
type = POWER_SUPPLY_USB_TYPE_SDP;
|
||||||
|
break;
|
||||||
|
case F_ACTIVE_MODE_BC12_DCP:
|
||||||
|
type = POWER_SUPPLY_USB_TYPE_DCP;
|
||||||
|
break;
|
||||||
|
case F_ACTIVE_MODE_BC12_CDP:
|
||||||
|
type = POWER_SUPPLY_USB_TYPE_CDP;
|
||||||
|
break;
|
||||||
|
};
|
||||||
|
|
||||||
|
val->intval = type;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ucs1002_get_health(struct ucs1002_info *info,
|
||||||
|
union power_supply_propval *val)
|
||||||
|
{
|
||||||
|
unsigned int reg;
|
||||||
|
int ret, health;
|
||||||
|
|
||||||
|
ret = regmap_read(info->regmap, UCS1002_REG_INTERRUPT_STATUS, ®);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
if (reg & F_TSD)
|
||||||
|
health = POWER_SUPPLY_HEALTH_OVERHEAT;
|
||||||
|
else if (reg & (F_OVER_VOLT | F_BACK_VOLT))
|
||||||
|
health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
|
||||||
|
else if (reg & F_OVER_ILIM)
|
||||||
|
health = POWER_SUPPLY_HEALTH_OVERCURRENT;
|
||||||
|
else if (reg & (F_DISCHARGE_ERR | F_MIN_KEEP_OUT))
|
||||||
|
health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
|
||||||
|
else
|
||||||
|
health = POWER_SUPPLY_HEALTH_GOOD;
|
||||||
|
|
||||||
|
val->intval = health;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ucs1002_get_property(struct power_supply *psy,
|
||||||
|
enum power_supply_property psp,
|
||||||
|
union power_supply_propval *val)
|
||||||
|
{
|
||||||
|
struct ucs1002_info *info = power_supply_get_drvdata(psy);
|
||||||
|
|
||||||
|
switch (psp) {
|
||||||
|
case POWER_SUPPLY_PROP_ONLINE:
|
||||||
|
return ucs1002_get_online(info, val);
|
||||||
|
case POWER_SUPPLY_PROP_CHARGE_NOW:
|
||||||
|
return ucs1002_get_charge(info, val);
|
||||||
|
case POWER_SUPPLY_PROP_CURRENT_NOW:
|
||||||
|
return ucs1002_get_current(info, val);
|
||||||
|
case POWER_SUPPLY_PROP_CURRENT_MAX:
|
||||||
|
return ucs1002_get_max_current(info, val);
|
||||||
|
case POWER_SUPPLY_PROP_USB_TYPE:
|
||||||
|
return ucs1002_get_usb_type(info, val);
|
||||||
|
case POWER_SUPPLY_PROP_HEALTH:
|
||||||
|
return ucs1002_get_health(info, val);
|
||||||
|
case POWER_SUPPLY_PROP_PRESENT:
|
||||||
|
val->intval = info->present;
|
||||||
|
return 0;
|
||||||
|
case POWER_SUPPLY_PROP_MANUFACTURER:
|
||||||
|
val->strval = UCS1002_MANUFACTURER;
|
||||||
|
return 0;
|
||||||
|
default:
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ucs1002_set_property(struct power_supply *psy,
|
||||||
|
enum power_supply_property psp,
|
||||||
|
const union power_supply_propval *val)
|
||||||
|
{
|
||||||
|
struct ucs1002_info *info = power_supply_get_drvdata(psy);
|
||||||
|
|
||||||
|
switch (psp) {
|
||||||
|
case POWER_SUPPLY_PROP_CURRENT_MAX:
|
||||||
|
return ucs1002_set_max_current(info, val->intval);
|
||||||
|
case POWER_SUPPLY_PROP_USB_TYPE:
|
||||||
|
return ucs1002_set_usb_type(info, val->intval);
|
||||||
|
default:
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ucs1002_property_is_writeable(struct power_supply *psy,
|
||||||
|
enum power_supply_property psp)
|
||||||
|
{
|
||||||
|
switch (psp) {
|
||||||
|
case POWER_SUPPLY_PROP_CURRENT_MAX:
|
||||||
|
case POWER_SUPPLY_PROP_USB_TYPE:
|
||||||
|
return true;
|
||||||
|
default:
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct power_supply_desc ucs1002_charger_desc = {
|
||||||
|
.name = "ucs1002",
|
||||||
|
.type = POWER_SUPPLY_TYPE_USB,
|
||||||
|
.usb_types = ucs1002_usb_types,
|
||||||
|
.num_usb_types = ARRAY_SIZE(ucs1002_usb_types),
|
||||||
|
.get_property = ucs1002_get_property,
|
||||||
|
.set_property = ucs1002_set_property,
|
||||||
|
.property_is_writeable = ucs1002_property_is_writeable,
|
||||||
|
.properties = ucs1002_props,
|
||||||
|
.num_properties = ARRAY_SIZE(ucs1002_props),
|
||||||
|
};
|
||||||
|
|
||||||
|
static irqreturn_t ucs1002_charger_irq(int irq, void *data)
|
||||||
|
{
|
||||||
|
int ret, regval;
|
||||||
|
bool present;
|
||||||
|
struct ucs1002_info *info = data;
|
||||||
|
|
||||||
|
present = info->present;
|
||||||
|
|
||||||
|
ret = regmap_read(info->regmap, UCS1002_REG_OTHER_STATUS, ®val);
|
||||||
|
if (ret)
|
||||||
|
return IRQ_HANDLED;
|
||||||
|
|
||||||
|
/* update attached status */
|
||||||
|
info->present = regval & F_ADET_PIN;
|
||||||
|
|
||||||
|
/* notify the change */
|
||||||
|
if (present != info->present)
|
||||||
|
power_supply_changed(info->charger);
|
||||||
|
|
||||||
|
return IRQ_HANDLED;
|
||||||
|
}
|
||||||
|
|
||||||
|
static irqreturn_t ucs1002_alert_irq(int irq, void *data)
|
||||||
|
{
|
||||||
|
struct ucs1002_info *info = data;
|
||||||
|
|
||||||
|
power_supply_changed(info->charger);
|
||||||
|
|
||||||
|
return IRQ_HANDLED;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct regulator_ops ucs1002_regulator_ops = {
|
||||||
|
.is_enabled = regulator_is_enabled_regmap,
|
||||||
|
.enable = regulator_enable_regmap,
|
||||||
|
.disable = regulator_disable_regmap,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct regulator_desc ucs1002_regulator_descriptor = {
|
||||||
|
.name = "ucs1002-vbus",
|
||||||
|
.ops = &ucs1002_regulator_ops,
|
||||||
|
.type = REGULATOR_VOLTAGE,
|
||||||
|
.owner = THIS_MODULE,
|
||||||
|
.enable_reg = UCS1002_REG_SWITCH_CFG,
|
||||||
|
.enable_mask = F_PWR_EN_SET,
|
||||||
|
.enable_val = F_PWR_EN_SET,
|
||||||
|
.fixed_uV = 5000000,
|
||||||
|
.n_voltages = 1,
|
||||||
|
};
|
||||||
|
|
||||||
|
static int ucs1002_probe(struct i2c_client *client,
|
||||||
|
const struct i2c_device_id *dev_id)
|
||||||
|
{
|
||||||
|
struct device *dev = &client->dev;
|
||||||
|
struct power_supply_config charger_config = {};
|
||||||
|
const struct regmap_config regmap_config = {
|
||||||
|
.reg_bits = 8,
|
||||||
|
.val_bits = 8,
|
||||||
|
};
|
||||||
|
struct regulator_config regulator_config = {};
|
||||||
|
int irq_a_det, irq_alert, ret;
|
||||||
|
struct regulator_dev *rdev;
|
||||||
|
struct ucs1002_info *info;
|
||||||
|
unsigned int regval;
|
||||||
|
|
||||||
|
info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
|
||||||
|
if (!info)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
info->regmap = devm_regmap_init_i2c(client, ®map_config);
|
||||||
|
ret = PTR_ERR_OR_ZERO(info->charger);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "Regmap initialization failed: %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
info->client = client;
|
||||||
|
|
||||||
|
irq_a_det = of_irq_get_byname(dev->of_node, "a_det");
|
||||||
|
irq_alert = of_irq_get_byname(dev->of_node, "alert");
|
||||||
|
|
||||||
|
charger_config.of_node = dev->of_node;
|
||||||
|
charger_config.drv_data = info;
|
||||||
|
|
||||||
|
ret = regmap_read(info->regmap, UCS1002_REG_PRODUCT_ID, ®val);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "Failed to read product ID: %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (regval != UCS1002_PRODUCT_ID) {
|
||||||
|
dev_err(dev,
|
||||||
|
"Product ID does not match (0x%02x != 0x%02x)\n",
|
||||||
|
regval, UCS1002_PRODUCT_ID);
|
||||||
|
return -ENODEV;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Enable charge rationing by default */
|
||||||
|
ret = regmap_update_bits(info->regmap, UCS1002_REG_GENERAL_CFG,
|
||||||
|
F_RATION_EN, F_RATION_EN);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "Failed to read general config: %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Ignore the M1, M2, PWR_EN, and EM_EN pin states. Set active
|
||||||
|
* mode selection to BC1.2 CDP.
|
||||||
|
*/
|
||||||
|
ret = regmap_update_bits(info->regmap, UCS1002_REG_SWITCH_CFG,
|
||||||
|
V_SET_ACTIVE_MODE_MASK | F_PIN_IGNORE,
|
||||||
|
V_SET_ACTIVE_MODE_BC12_CDP | F_PIN_IGNORE);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "Failed to configure default mode: %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
/*
|
||||||
|
* Be safe and set initial current limit to 500mA
|
||||||
|
*/
|
||||||
|
ret = ucs1002_set_max_current(info, 500000);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "Failed to set max current default: %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
info->charger = devm_power_supply_register(dev, &ucs1002_charger_desc,
|
||||||
|
&charger_config);
|
||||||
|
ret = PTR_ERR_OR_ZERO(info->charger);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "Failed to register power supply: %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = regmap_read(info->regmap, UCS1002_REG_PIN_STATUS, ®val);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "Failed to read pin status: %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
info->regulator_descriptor =
|
||||||
|
devm_kmemdup(dev, &ucs1002_regulator_descriptor,
|
||||||
|
sizeof(ucs1002_regulator_descriptor),
|
||||||
|
GFP_KERNEL);
|
||||||
|
if (!info->regulator_descriptor)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
info->regulator_descriptor->enable_is_inverted = !(regval & F_SEL_PIN);
|
||||||
|
|
||||||
|
regulator_config.dev = dev;
|
||||||
|
regulator_config.of_node = dev->of_node;
|
||||||
|
regulator_config.regmap = info->regmap;
|
||||||
|
|
||||||
|
rdev = devm_regulator_register(dev, info->regulator_descriptor,
|
||||||
|
®ulator_config);
|
||||||
|
ret = PTR_ERR_OR_ZERO(info->charger);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "Failed to register VBUS regulator: %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (irq_a_det > 0) {
|
||||||
|
ret = devm_request_threaded_irq(dev, irq_a_det, NULL,
|
||||||
|
ucs1002_charger_irq,
|
||||||
|
IRQF_ONESHOT,
|
||||||
|
"ucs1002-a_det", info);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "Failed to request A_DET threaded irq: %d\n",
|
||||||
|
ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if (irq_alert > 0) {
|
||||||
|
ret = devm_request_threaded_irq(dev, irq_alert, NULL,
|
||||||
|
ucs1002_alert_irq,
|
||||||
|
IRQF_ONESHOT,
|
||||||
|
"ucs1002-alert", info);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "Failed to request ALERT threaded irq: %d\n",
|
||||||
|
ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct of_device_id ucs1002_of_match[] = {
|
||||||
|
{ .compatible = "microchip,ucs1002", },
|
||||||
|
{ /* sentinel */ },
|
||||||
|
};
|
||||||
|
MODULE_DEVICE_TABLE(of, ucs1002_of_match);
|
||||||
|
|
||||||
|
static struct i2c_driver ucs1002_driver = {
|
||||||
|
.driver = {
|
||||||
|
.name = "ucs1002",
|
||||||
|
.of_match_table = ucs1002_of_match,
|
||||||
|
},
|
||||||
|
.probe = ucs1002_probe,
|
||||||
|
};
|
||||||
|
module_i2c_driver(ucs1002_driver);
|
||||||
|
|
||||||
|
MODULE_DESCRIPTION("Microchip UCS1002 Programmable USB Port Power Controller");
|
||||||
|
MODULE_AUTHOR("Enric Balletbo Serra <enric.balletbo@collabora.com>");
|
||||||
|
MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
|
||||||
|
MODULE_LICENSE("GPL");
|
||||||
Loading…
Reference in New Issue
Block a user