mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-26 06:20:54 +07:00
regulator: bd70528: Support ROHM BD70528 regulator block
BD70528MWV is an ultra-low Iq general purpose single-chip power management IC for battery-powered portable devices. Add support for controlling 3 bucks and 3 LDOs present in ROHM BD70528. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Matti Vaittinen
Mark Brown
parent
fd805d9935
commit
99ea37bd1e
@ -180,6 +180,17 @@ config REGULATOR_BCM590XX
|
||||
BCM590xx PMUs. This will enable support for the software
|
||||
controllable LDO/Switching regulators.
|
||||
|
||||
config REGULATOR_BD70528
|
||||
tristate "ROHM BD70528 Power Regulator"
|
||||
depends on MFD_ROHM_BD70528
|
||||
help
|
||||
This driver supports voltage regulators on ROHM BD70528 PMIC.
|
||||
This will enable support for the software controllable buck
|
||||
and LDO regulators.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called bd70528-regulator.
|
||||
|
||||
config REGULATOR_BD718XX
|
||||
tristate "ROHM BD71837 Power Regulator"
|
||||
depends on MFD_ROHM_BD718XX
|
||||
|
||||
@ -27,6 +27,7 @@ obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_BD70528) += bd70528-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_BD718XX) += bd718x7-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
|
||||
|
||||
290
drivers/regulator/bd70528-regulator.c
Normal file
290
drivers/regulator/bd70528-regulator.c
Normal file
@ -0,0 +1,290 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
// Copyright (C) 2018 ROHM Semiconductors
|
||||
// bd70528-regulator.c ROHM BD70528MWV regulator driver
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/mfd/rohm-bd70528.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#define BUCK_RAMPRATE_250MV 0
|
||||
#define BUCK_RAMPRATE_125MV 1
|
||||
#define BUCK_RAMP_MAX 250
|
||||
|
||||
static struct regulator_linear_range bd70528_buck1_volts[] = {
|
||||
REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 600000),
|
||||
REGULATOR_LINEAR_RANGE(2750000, 0x2, 0xf, 50000),
|
||||
};
|
||||
static struct regulator_linear_range bd70528_buck2_volts[] = {
|
||||
REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 300000),
|
||||
REGULATOR_LINEAR_RANGE(1550000, 0x2, 0xd, 50000),
|
||||
REGULATOR_LINEAR_RANGE(3000000, 0xe, 0xf, 300000),
|
||||
};
|
||||
static struct regulator_linear_range bd70528_buck3_volts[] = {
|
||||
REGULATOR_LINEAR_RANGE(800000, 0x00, 0xd, 50000),
|
||||
REGULATOR_LINEAR_RANGE(1800000, 0xe, 0xf, 0),
|
||||
};
|
||||
|
||||
/* All LDOs have same voltage ranges */
|
||||
static struct regulator_linear_range bd70528_ldo_volts[] = {
|
||||
REGULATOR_LINEAR_RANGE(1650000, 0x0, 0x07, 50000),
|
||||
REGULATOR_LINEAR_RANGE(2100000, 0x8, 0x0f, 100000),
|
||||
REGULATOR_LINEAR_RANGE(2850000, 0x10, 0x19, 50000),
|
||||
REGULATOR_LINEAR_RANGE(3300000, 0x19, 0x1f, 0),
|
||||
};
|
||||
|
||||
/* Also both LEDs support same voltages */
|
||||
static const unsigned int led_volts[] = {
|
||||
20000, 30000
|
||||
};
|
||||
|
||||
static int bd70528_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
|
||||
{
|
||||
if (ramp_delay > 0 && ramp_delay <= BUCK_RAMP_MAX) {
|
||||
unsigned int ramp_value = BUCK_RAMPRATE_250MV;
|
||||
|
||||
if (ramp_delay <= 125)
|
||||
ramp_value = BUCK_RAMPRATE_125MV;
|
||||
|
||||
return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
|
||||
BD70528_MASK_BUCK_RAMP,
|
||||
ramp_value << BD70528_SIFT_BUCK_RAMP);
|
||||
}
|
||||
dev_err(&rdev->dev, "%s: ramp_delay: %d not supported\n",
|
||||
rdev->desc->name, ramp_delay);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int bd70528_led_set_voltage_sel(struct regulator_dev *rdev,
|
||||
unsigned int sel)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = regulator_is_enabled_regmap(rdev);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
if (ret == 0)
|
||||
return regulator_set_voltage_sel_regmap(rdev, sel);
|
||||
|
||||
dev_err(&rdev->dev,
|
||||
"LED voltage change not allowed when led is enabled\n");
|
||||
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
static struct regulator_ops bd70528_buck_ops = {
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.list_voltage = regulator_list_voltage_linear_range,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
||||
.set_ramp_delay = bd70528_set_ramp_delay,
|
||||
};
|
||||
|
||||
static struct regulator_ops bd70528_ldo_ops = {
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.list_voltage = regulator_list_voltage_linear_range,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
||||
.set_ramp_delay = bd70528_set_ramp_delay,
|
||||
};
|
||||
|
||||
static struct regulator_ops bd70528_led_ops = {
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.list_voltage = regulator_list_voltage_table,
|
||||
.set_voltage_sel = bd70528_led_set_voltage_sel,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
};
|
||||
|
||||
|
||||
static struct regulator_desc bd70528_desc[] = {
|
||||
{
|
||||
.name = "buck1",
|
||||
.of_match = of_match_ptr("BUCK1"),
|
||||
.regulators_node = of_match_ptr("regulators"),
|
||||
.id = BD70528_BUCK1,
|
||||
.ops = &bd70528_buck_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.linear_ranges = bd70528_buck1_volts,
|
||||
.n_linear_ranges = ARRAY_SIZE(bd70528_buck1_volts),
|
||||
.n_voltages = BD70528_BUCK_VOLTS,
|
||||
.enable_reg = BD70528_REG_BUCK1_EN,
|
||||
.enable_mask = BD70528_MASK_RUN_EN,
|
||||
.vsel_reg = BD70528_REG_BUCK1_VOLT,
|
||||
.vsel_mask = BD70528_MASK_BUCK_VOLT,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "buck2",
|
||||
.of_match = of_match_ptr("BUCK2"),
|
||||
.regulators_node = of_match_ptr("regulators"),
|
||||
.id = BD70528_BUCK2,
|
||||
.ops = &bd70528_buck_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.linear_ranges = bd70528_buck2_volts,
|
||||
.n_linear_ranges = ARRAY_SIZE(bd70528_buck2_volts),
|
||||
.n_voltages = BD70528_BUCK_VOLTS,
|
||||
.enable_reg = BD70528_REG_BUCK2_EN,
|
||||
.enable_mask = BD70528_MASK_RUN_EN,
|
||||
.vsel_reg = BD70528_REG_BUCK2_VOLT,
|
||||
.vsel_mask = BD70528_MASK_BUCK_VOLT,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "buck3",
|
||||
.of_match = of_match_ptr("BUCK3"),
|
||||
.regulators_node = of_match_ptr("regulators"),
|
||||
.id = BD70528_BUCK3,
|
||||
.ops = &bd70528_buck_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.linear_ranges = bd70528_buck3_volts,
|
||||
.n_linear_ranges = ARRAY_SIZE(bd70528_buck3_volts),
|
||||
.n_voltages = BD70528_BUCK_VOLTS,
|
||||
.enable_reg = BD70528_REG_BUCK3_EN,
|
||||
.enable_mask = BD70528_MASK_RUN_EN,
|
||||
.vsel_reg = BD70528_REG_BUCK3_VOLT,
|
||||
.vsel_mask = BD70528_MASK_BUCK_VOLT,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "ldo1",
|
||||
.of_match = of_match_ptr("LDO1"),
|
||||
.regulators_node = of_match_ptr("regulators"),
|
||||
.id = BD70528_LDO1,
|
||||
.ops = &bd70528_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.linear_ranges = bd70528_ldo_volts,
|
||||
.n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts),
|
||||
.n_voltages = BD70528_LDO_VOLTS,
|
||||
.enable_reg = BD70528_REG_LDO1_EN,
|
||||
.enable_mask = BD70528_MASK_RUN_EN,
|
||||
.vsel_reg = BD70528_REG_LDO1_VOLT,
|
||||
.vsel_mask = BD70528_MASK_LDO_VOLT,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "ldo2",
|
||||
.of_match = of_match_ptr("LDO2"),
|
||||
.regulators_node = of_match_ptr("regulators"),
|
||||
.id = BD70528_LDO2,
|
||||
.ops = &bd70528_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.linear_ranges = bd70528_ldo_volts,
|
||||
.n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts),
|
||||
.n_voltages = BD70528_LDO_VOLTS,
|
||||
.enable_reg = BD70528_REG_LDO2_EN,
|
||||
.enable_mask = BD70528_MASK_RUN_EN,
|
||||
.vsel_reg = BD70528_REG_LDO2_VOLT,
|
||||
.vsel_mask = BD70528_MASK_LDO_VOLT,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "ldo3",
|
||||
.of_match = of_match_ptr("LDO3"),
|
||||
.regulators_node = of_match_ptr("regulators"),
|
||||
.id = BD70528_LDO3,
|
||||
.ops = &bd70528_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.linear_ranges = bd70528_ldo_volts,
|
||||
.n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts),
|
||||
.n_voltages = BD70528_LDO_VOLTS,
|
||||
.enable_reg = BD70528_REG_LDO3_EN,
|
||||
.enable_mask = BD70528_MASK_RUN_EN,
|
||||
.vsel_reg = BD70528_REG_LDO3_VOLT,
|
||||
.vsel_mask = BD70528_MASK_LDO_VOLT,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "ldo_led1",
|
||||
.of_match = of_match_ptr("LDO_LED1"),
|
||||
.regulators_node = of_match_ptr("regulators"),
|
||||
.id = BD70528_LED1,
|
||||
.ops = &bd70528_led_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.volt_table = &led_volts[0],
|
||||
.n_voltages = ARRAY_SIZE(led_volts),
|
||||
.enable_reg = BD70528_REG_LED_EN,
|
||||
.enable_mask = BD70528_MASK_LED1_EN,
|
||||
.vsel_reg = BD70528_REG_LED_VOLT,
|
||||
.vsel_mask = BD70528_MASK_LED1_VOLT,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "ldo_led2",
|
||||
.of_match = of_match_ptr("LDO_LED2"),
|
||||
.regulators_node = of_match_ptr("regulators"),
|
||||
.id = BD70528_LED2,
|
||||
.ops = &bd70528_led_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.volt_table = &led_volts[0],
|
||||
.n_voltages = ARRAY_SIZE(led_volts),
|
||||
.enable_reg = BD70528_REG_LED_EN,
|
||||
.enable_mask = BD70528_MASK_LED2_EN,
|
||||
.vsel_reg = BD70528_REG_LED_VOLT,
|
||||
.vsel_mask = BD70528_MASK_LED2_VOLT,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
|
||||
};
|
||||
|
||||
static int bd70528_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct bd70528 *bd70528;
|
||||
int i;
|
||||
struct regulator_config config = {
|
||||
.dev = pdev->dev.parent,
|
||||
};
|
||||
|
||||
bd70528 = dev_get_drvdata(pdev->dev.parent);
|
||||
if (!bd70528) {
|
||||
dev_err(&pdev->dev, "No MFD driver data\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
config.regmap = bd70528->chip.regmap;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(bd70528_desc); i++) {
|
||||
struct regulator_dev *rdev;
|
||||
|
||||
rdev = devm_regulator_register(&pdev->dev, &bd70528_desc[i],
|
||||
&config);
|
||||
if (IS_ERR(rdev)) {
|
||||
dev_err(&pdev->dev,
|
||||
"failed to register %s regulator\n",
|
||||
bd70528_desc[i].name);
|
||||
return PTR_ERR(rdev);
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver bd70528_regulator = {
|
||||
.driver = {
|
||||
.name = "bd70528-pmic"
|
||||
},
|
||||
.probe = bd70528_probe,
|
||||
};
|
||||
|
||||
module_platform_driver(bd70528_regulator);
|
||||
|
||||
MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
|
||||
MODULE_DESCRIPTION("BD70528 voltage regulator driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user