AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-01 13:26:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

leds-lp5521: clean up lp5521_configure()

Browse Source 
This patch is a preceding step for making common lp55xx init function.

 LP5521_REG_R_CURRENT register code moved:
 Chip specific code moved from lp5521_init_device() to lp5521_configure().

 Remove engine init function:
 LP5521 has internal program engines which are used for running LED patterns.
 (blinking, ramp up/down and other emotional visual effects)
 Engine initialization is done by reset command in lp5521_init_device().
 Remove this duplicate code.

 Return code:
 Do not use 'OR' arithmetic for the result.
 If some error occus, just return it.

 Enable latency:
 Use explicit named function, lp5521_wait_enable_done().
 According to the datasheet, 500us is guaranteed time.
 Thus wait time is changed from 1000us to 500us.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
This commit is contained in:
Milo(Woogyom) Kim 2013-02-05 18:03:55 +09:00 committed by Bryan Wu
parent 6a0c9a4796
commit 9448217403
1 changed files with 38 additions and 40 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

78
drivers/leds/leds-lp5521.c
View File

@ -125,6 +125,12 @@ struct lp5521_chip {
u8 num_leds;
};
static inline void lp5521_wait_enable_done(void)
{
/* it takes more 488 us to update ENABLE register */
usleep_range(500, 600);
}
static inline struct lp5521_led *cdev_to_led(struct led_classdev *cdev)
{
return container_of(cdev, struct lp5521_led, cdev);
@ -229,43 +235,56 @@ static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr)
curr);
}
static void lp5521_init_engine(struct lp5521_chip *chip)
{
int i;
for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
chip->engines[i].id = i + 1;
chip->engines[i].engine_mask = LP5521_ENG_MASK_BASE >> (i * 2);
chip->engines[i].prog_page = i;
}
}
static int lp5521_configure(struct i2c_client *client)
{
struct lp5521_chip *chip = i2c_get_clientdata(client);
int ret;
u8 cfg;
u8 val;
lp5521_init_engine(chip);
/*
* Make sure that the chip is reset by reading back the r channel
* current reg. This is dummy read is required on some platforms -
* otherwise further access to the R G B channels in the
* LP5521_REG_ENABLE register will not have any effect - strange!
*/
ret = lp5521_read(client, LP5521_REG_R_CURRENT, &val);
if (ret) {
dev_err(&client->dev, "error in resetting chip\n");
return ret;
}
if (val != LP5521_REG_R_CURR_DEFAULT) {
dev_err(&client->dev,
"unexpected data in register (expected 0x%x got 0x%x)\n",
LP5521_REG_R_CURR_DEFAULT, val);
ret = -EINVAL;
return ret;
}
usleep_range(10000, 20000);
/* Set all PWMs to direct control mode */
ret = lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
cfg = chip->pdata->update_config ?
: (LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT);
ret |= lp5521_write(client, LP5521_REG_CONFIG, cfg);
ret = lp5521_write(client, LP5521_REG_CONFIG, cfg);
if (ret)
return ret;
/* Initialize all channels PWM to zero -> leds off */
ret |= lp5521_write(client, LP5521_REG_R_PWM, 0);
ret |= lp5521_write(client, LP5521_REG_G_PWM, 0);
ret |= lp5521_write(client, LP5521_REG_B_PWM, 0);
lp5521_write(client, LP5521_REG_R_PWM, 0);
lp5521_write(client, LP5521_REG_G_PWM, 0);
lp5521_write(client, LP5521_REG_B_PWM, 0);
/* Set engines are set to run state when OP_MODE enables engines */
ret |= lp5521_write(client, LP5521_REG_ENABLE,
ret = lp5521_write(client, LP5521_REG_ENABLE,
LP5521_ENABLE_RUN_PROGRAM);
/* enable takes 500us. 1 - 2 ms leaves some margin */
usleep_range(1000, 2000);
if (ret)
return ret;
return ret;
lp5521_wait_enable_done();
return 0;
}
static int lp5521_run_selftest(struct lp5521_chip *chip, char *buf)
@ -703,7 +722,6 @@ static int lp5521_init_device(struct lp5521_chip *chip)
struct lp5521_platform_data *pdata = chip->pdata;
struct i2c_client *client = chip->client;
int ret;
u8 buf;
if (pdata->setup_resources) {
ret = pdata->setup_resources();
@ -725,26 +743,6 @@ static int lp5521_init_device(struct lp5521_chip *chip)
* appears to be enough for reset.
*/
/*
* Make sure that the chip is reset by reading back the r channel
* current reg. This is dummy read is required on some platforms -
* otherwise further access to the R G B channels in the
* LP5521_REG_ENABLE register will not have any effect - strange!
*/
ret = lp5521_read(client, LP5521_REG_R_CURRENT, &buf);
if (ret) {
dev_err(&client->dev, "error in resetting chip\n");
return ret;
}
if (buf != LP5521_REG_R_CURR_DEFAULT) {
dev_err(&client->dev,
"unexpected data in register (expected 0x%x got 0x%x)\n",
LP5521_REG_R_CURR_DEFAULT, buf);
ret = -EINVAL;
return ret;
}
usleep_range(10000, 20000);
ret = lp5521_detect(client);
if (ret) {
dev_err(&client->dev, "Chip not found\n");