From 0b4edf111870b83ea77b1d7e16b8ceac29f9f388 Mon Sep 17 00:00:00 2001 From: Faiz Abbas Date: Wed, 13 May 2020 02:08:04 +0530 Subject: [PATCH 001/618] ARM: dts: Move am33xx and am43xx mmc nodes to sdhci-omap driver Move mmc nodes to be compatible with the sdhci-omap driver. The following modifications are required for omap_hsmmc specific properties: ti,non-removable: convert to the generic mmc non-removable ti,needs-special-reset: co-opted into the sdhci-omap driver ti,dual-volt: removed. Legacy property not used in am335x or am43xx ti,needs-special-hs-handling: removed. Legacy property not used in am335x or am43xx Also since the sdhci-omap driver does not support runtime PM, explicitly disable the mmc3 instance in the dtsi. Signed-off-by: Faiz Abbas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-baltos.dtsi | 2 +- arch/arm/boot/dts/am335x-boneblack-common.dtsi | 1 + arch/arm/boot/dts/am335x-boneblack-wireless.dts | 1 - arch/arm/boot/dts/am335x-boneblue.dts | 1 - arch/arm/boot/dts/am335x-bonegreen-wireless.dts | 1 - arch/arm/boot/dts/am335x-evm.dts | 3 +-- arch/arm/boot/dts/am335x-evmsk.dts | 2 +- arch/arm/boot/dts/am335x-lxm.dts | 2 +- arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi | 2 +- arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts | 2 +- arch/arm/boot/dts/am335x-pepper.dts | 4 ++-- arch/arm/boot/dts/am335x-phycore-som.dtsi | 2 +- arch/arm/boot/dts/am33xx-l4.dtsi | 6 ++---- arch/arm/boot/dts/am33xx.dtsi | 3 ++- arch/arm/boot/dts/am4372.dtsi | 3 ++- arch/arm/boot/dts/am437x-cm-t43.dts | 2 +- arch/arm/boot/dts/am437x-gp-evm.dts | 4 ++-- arch/arm/boot/dts/am437x-l4.dtsi | 5 ++--- arch/arm/boot/dts/am437x-sk-evm.dts | 2 +- 19 files changed, 22 insertions(+), 26 deletions(-) diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index 05e7b5d4a95b..04f0b1227efe 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -369,7 +369,7 @@ &mmc1 { &mmc2 { status = "okay"; vmmc-supply = <&wl12xx_vmmc>; - ti,non-removable; + non-removable; bus-width = <4>; cap-power-off-card; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi index 91f93bc89716..dd932220a8bf 100644 --- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi +++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi @@ -22,6 +22,7 @@ &mmc2 { pinctrl-0 = <&emmc_pins>; bus-width = <8>; status = "okay"; + non-removable; }; &am33xx_pinmux { diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts index 3124d94c0b3c..e07dd7979586 100644 --- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts +++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts @@ -75,7 +75,6 @@ &mmc3 { bus-width = <4>; non-removable; cap-power-off-card; - ti,needs-special-hs-handling; keep-power-in-suspend; pinctrl-names = "default"; pinctrl-0 = <&mmc3_pins &wl18xx_pins>; diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index 5811fb8d4fdf..83f9452c9cd3 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -367,7 +367,6 @@ &mmc3 { bus-width = <4>; non-removable; cap-power-off-card; - ti,needs-special-hs-handling; keep-power-in-suspend; pinctrl-names = "default"; pinctrl-0 = <&mmc3_pins &wl18xx_pins>; diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts index 4092cd193b8a..609c8db687ec 100644 --- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts @@ -75,7 +75,6 @@ &mmc3 { bus-width = <4>; non-removable; cap-power-off-card; - ti,needs-special-hs-handling; keep-power-in-suspend; pinctrl-names = "default"; pinctrl-0 = <&mmc3_pins &wl18xx_pins>; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 68252dab32c3..a4fc6b168a85 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -743,8 +743,7 @@ xbar-event-map element */ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc3_pins &wlan_pins>; - ti,non-removable; - ti,needs-special-hs-handling; + non-removable; cap-power-off-card; keep-power-in-suspend; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 32f515a295ee..78b6e1f594c9 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -655,7 +655,7 @@ &gpio0 { &mmc2 { status = "okay"; vmmc-supply = <&wl12xx_vmmc>; - ti,non-removable; + non-removable; bus-width = <4>; cap-power-off-card; keep-power-in-suspend; diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts index fef582852820..dbedf729205c 100644 --- a/arch/arm/boot/dts/am335x-lxm.dts +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -339,7 +339,7 @@ &mmc2 { pinctrl-0 = <&emmc_pins>; vmmc-supply = <&vmmcsd_fixed>; bus-width = <8>; - ti,non-removable; + non-removable; status = "okay"; }; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi index 6495a125c01f..4e90f9c23d2e 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi @@ -159,7 +159,7 @@ &mmc2 { vmmc-supply = <&vmmcsd_fixed>; bus-width = <8>; pinctrl-0 = <&mmc1_pins_default>; - ti,non-removable; + non-removable; status = "okay"; }; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts index 244df9c5a537..f03e72cada41 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts @@ -451,7 +451,7 @@ &mmc3 { vmmc-supply = <&vmmcsd_fixed>; bus-width = <8>; pinctrl-0 = <&mmc2_pins_default>; - ti,non-removable; + non-removable; status = "okay"; }; diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 6d7608d9377b..f9a027b47962 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -341,7 +341,7 @@ &mmc2 { pinctrl-0 = <&emmc_pins>; vmmc-supply = <&ldo3_reg>; bus-width = <8>; - ti,non-removable; + non-removable; }; &mmc3 { @@ -351,7 +351,7 @@ &mmc3 { pinctrl-0 = <&wireless_pins>; vmmmc-supply = <&v3v3c_reg>; bus-width = <4>; - ti,non-removable; + non-removable; dmas = <&edma_xbar 12 0 1 &edma_xbar 13 0 2>; dma-names = "tx", "rx"; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 3d0672b53d77..7e46b4c02709 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -69,7 +69,7 @@ &mmc2 { pinctrl-0 = <&emmc_pins>; vmmc-supply = <&vmmc_reg>; bus-width = <8>; - ti,non-removable; + non-removable; status = "disabled"; }; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 5ed7f3c58c0f..573ff076178b 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -1337,10 +1337,8 @@ SYSC_OMAP2_SOFTRESET | ranges = <0x0 0x60000 0x1000>; mmc1: mmc@0 { - compatible = "ti,omap4-hsmmc"; - ti,dual-volt; + compatible = "ti,am335-sdhci"; ti,needs-special-reset; - ti,needs-special-hs-handling; dmas = <&edma_xbar 24 0 0 &edma_xbar 25 0 0>; dma-names = "tx", "rx"; @@ -1818,7 +1816,7 @@ SYSC_OMAP2_SOFTRESET | ranges = <0x0 0xd8000 0x1000>; mmc2: mmc@0 { - compatible = "ti,omap4-hsmmc"; + compatible = "ti,am335-sdhci"; ti,needs-special-reset; dmas = <&edma 2 0 &edma 3 0>; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index a35f5052d76f..3b9d4d2d35bf 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -322,10 +322,11 @@ SYSC_OMAP2_SOFTRESET | ranges = <0x0 0x47810000 0x1000>; mmc3: mmc@0 { - compatible = "ti,omap4-hsmmc"; + compatible = "ti,am335-sdhci"; ti,needs-special-reset; interrupts = <29>; reg = <0x0 0x1000>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index dba87bfaf33e..092b3d4404f4 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -316,10 +316,11 @@ SYSC_OMAP2_SOFTRESET | ranges = <0x0 0x47810000 0x1000>; mmc3: mmc@0 { - compatible = "ti,omap4-hsmmc"; + compatible = "ti,am437-sdhci"; ti,needs-special-reset; interrupts = ; reg = <0x0 0x1000>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts index 063113a5da2d..a6b4fca8626a 100644 --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -291,7 +291,7 @@ &mmc2 { pinctrl-0 = <&emmc_pins>; vmmc-supply = <&vmmc_3v3>; bus-width = <8>; - ti,non-removable; + non-removable; }; &spi0 { diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 811c8cae315b..cadf47ee337f 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -869,7 +869,7 @@ &mmc2 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&emmc_pins_default>; pinctrl-1 = <&emmc_pins_sleep>; - ti,non-removable; + non-removable; }; &mmc3 { @@ -886,7 +886,7 @@ xbar-event-map element */ pinctrl-1 = <&mmc3_pins_sleep>; cap-power-off-card; keep-power-in-suspend; - ti,non-removable; + non-removable; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index 49c6a872052e..f4eb36d8b660 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -1086,9 +1086,8 @@ SYSC_OMAP2_SOFTRESET | ranges = <0x0 0x60000 0x1000>; mmc1: mmc@0 { - compatible = "ti,omap4-hsmmc"; + compatible = "ti,am437-sdhci"; reg = <0x0 0x1000>; - ti,dual-volt; ti,needs-special-reset; dmas = <&edma 24 0>, <&edma 25 0>; @@ -1601,7 +1600,7 @@ SYSC_OMAP2_SOFTRESET | ranges = <0x0 0xd8000 0x1000>; mmc2: mmc@0 { - compatible = "ti,omap4-hsmmc"; + compatible = "ti,am437-sdhci"; reg = <0x0 0x1000>; ti,needs-special-reset; dmas = <&edma 2 0>, diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 25222497f828..2416597a4f5c 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -719,7 +719,7 @@ &mmc3 { pinctrl-1 = <&mmc3_pins_sleep>; cap-power-off-card; keep-power-in-suspend; - ti,non-removable; + non-removable; #address-cells = <1>; #size-cells = <0>; From 98ece19f247159a51003796ede7112fef2df5d7f Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 14 May 2020 10:37:18 +0300 Subject: [PATCH 002/618] soc: ti: omap-prm: use atomic iopoll instead of sleeping one The reset handling APIs for omap-prm can be invoked PM runtime which runs in atomic context. For this to work properly, switch to atomic iopoll version instead of the current which can sleep. Otherwise, this throws a "BUG: scheduling while atomic" warning. Issue is seen rather easily when CONFIG_PREEMPT is enabled. Signed-off-by: Tero Kristo Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- drivers/soc/ti/omap_prm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c index 96c6f777519c..c9b3f9ebf0bb 100644 --- a/drivers/soc/ti/omap_prm.c +++ b/drivers/soc/ti/omap_prm.c @@ -256,10 +256,10 @@ static int omap_reset_deassert(struct reset_controller_dev *rcdev, goto exit; /* wait for the status to be set */ - ret = readl_relaxed_poll_timeout(reset->prm->base + - reset->prm->data->rstst, - v, v & BIT(st_bit), 1, - OMAP_RESET_MAX_WAIT); + ret = readl_relaxed_poll_timeout_atomic(reset->prm->base + + reset->prm->data->rstst, + v, v & BIT(st_bit), 1, + OMAP_RESET_MAX_WAIT); if (ret) pr_err("%s: timedout waiting for %s:%lu\n", __func__, reset->prm->data->name, id); From 5ce8aee81be6c8bc19051d7c7b0d3cbb7ac5fc3f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 27 May 2020 06:49:29 -0700 Subject: [PATCH 003/618] bus: ti-sysc: Flush posted write on enable and disable Looks like we're missing flush of posted write after module enable and disable. I've seen occasional errors accessing various modules, and it is suspected that the lack of posted writes can also cause random reboots. The errors we can see are similar to the one below from spi for example: 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4CFG (Read): Data Access in User mode during Functional access ... mcspi_wait_for_reg_bit omap2_mcspi_transfer_one spi_transfer_one_message ... We also want to also flush posted write for disable. The clkctrl clock disable happens after module disable, and we don't want to have the module potentially stay active while we're trying to disable the clock. Fixes: d59b60564cbf ("bus: ti-sysc: Add generic enable/disable functions") Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index e5f5f48d69d2..369c97c3e0c0 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -991,6 +991,9 @@ static int sysc_enable_module(struct device *dev) sysc_write_sysconfig(ddata, reg); } + /* Flush posted write */ + sysc_read(ddata, ddata->offsets[SYSC_SYSCONFIG]); + if (ddata->module_enable_quirk) ddata->module_enable_quirk(ddata); @@ -1071,6 +1074,9 @@ static int sysc_disable_module(struct device *dev) reg |= 1 << regbits->autoidle_shift; sysc_write_sysconfig(ddata, reg); + /* Flush posted write */ + sysc_read(ddata, ddata->offsets[SYSC_SYSCONFIG]); + return 0; } From 53d860952c8215cf9ae1ea33409c8cb71ad6ad3d Mon Sep 17 00:00:00 2001 From: Jens Thoms Toerring Date: Sun, 31 May 2020 11:53:00 +0200 Subject: [PATCH 004/618] regmap: fix alignment issue The assembly and disassembly of data to be sent to or received from a device invoke functions regmap_format_XX() and regmap_parse_XX() that extract or insert data items from or into a buffer, using assignments. In some cases the functions are called with a buffer pointer with an odd address. On architectures with strict alignment requirements this can result in a kernel crash. The assignments have been replaced by functions that take alignment into account. Signed-off-by: Jens Thoms Toerring Link: https://lore.kernel.org/r/20200531095300.GA27570@toerring.de Signed-off-by: Mark Brown --- drivers/base/regmap/regmap.c | 100 ++++++++++++++++------------------- 1 file changed, 46 insertions(+), 54 deletions(-) diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index c472f624382d..22d125da4a7d 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -17,6 +17,7 @@ #include #include #include +#include #define CREATE_TRACE_POINTS #include "trace.h" @@ -249,22 +250,20 @@ static void regmap_format_8(void *buf, unsigned int val, unsigned int shift) static void regmap_format_16_be(void *buf, unsigned int val, unsigned int shift) { - __be16 *b = buf; - - b[0] = cpu_to_be16(val << shift); + put_unaligned_be16(val << shift, buf); } static void regmap_format_16_le(void *buf, unsigned int val, unsigned int shift) { - __le16 *b = buf; - - b[0] = cpu_to_le16(val << shift); + put_unaligned_le16(val << shift, buf); } static void regmap_format_16_native(void *buf, unsigned int val, unsigned int shift) { - *(u16 *)buf = val << shift; + u16 v = val << shift; + + memcpy(buf, &v, sizeof(v)); } static void regmap_format_24(void *buf, unsigned int val, unsigned int shift) @@ -280,43 +279,39 @@ static void regmap_format_24(void *buf, unsigned int val, unsigned int shift) static void regmap_format_32_be(void *buf, unsigned int val, unsigned int shift) { - __be32 *b = buf; - - b[0] = cpu_to_be32(val << shift); + put_unaligned_be32(val << shift, buf); } static void regmap_format_32_le(void *buf, unsigned int val, unsigned int shift) { - __le32 *b = buf; - - b[0] = cpu_to_le32(val << shift); + put_unaligned_le32(val << shift, buf); } static void regmap_format_32_native(void *buf, unsigned int val, unsigned int shift) { - *(u32 *)buf = val << shift; + u32 v = val << shift; + + memcpy(buf, &v, sizeof(v)); } #ifdef CONFIG_64BIT static void regmap_format_64_be(void *buf, unsigned int val, unsigned int shift) { - __be64 *b = buf; - - b[0] = cpu_to_be64((u64)val << shift); + put_unaligned_be64((u64) val << shift, buf); } static void regmap_format_64_le(void *buf, unsigned int val, unsigned int shift) { - __le64 *b = buf; - - b[0] = cpu_to_le64((u64)val << shift); + put_unaligned_le64((u64) val << shift, buf); } static void regmap_format_64_native(void *buf, unsigned int val, unsigned int shift) { - *(u64 *)buf = (u64)val << shift; + u64 v = (u64) val << shift; + + memcpy(buf, &v, sizeof(v)); } #endif @@ -333,35 +328,34 @@ static unsigned int regmap_parse_8(const void *buf) static unsigned int regmap_parse_16_be(const void *buf) { - const __be16 *b = buf; - - return be16_to_cpu(b[0]); + return get_unaligned_be16(buf); } static unsigned int regmap_parse_16_le(const void *buf) { - const __le16 *b = buf; - - return le16_to_cpu(b[0]); + return get_unaligned_le16(buf); } static void regmap_parse_16_be_inplace(void *buf) { - __be16 *b = buf; + u16 v = get_unaligned_be16(buf); - b[0] = be16_to_cpu(b[0]); + memcpy(buf, &v, sizeof(v)); } static void regmap_parse_16_le_inplace(void *buf) { - __le16 *b = buf; + u16 v = get_unaligned_le16(buf); - b[0] = le16_to_cpu(b[0]); + memcpy(buf, &v, sizeof(v)); } static unsigned int regmap_parse_16_native(const void *buf) { - return *(u16 *)buf; + u16 v; + + memcpy(&v, buf, sizeof(v)); + return v; } static unsigned int regmap_parse_24(const void *buf) @@ -376,69 +370,67 @@ static unsigned int regmap_parse_24(const void *buf) static unsigned int regmap_parse_32_be(const void *buf) { - const __be32 *b = buf; - - return be32_to_cpu(b[0]); + return get_unaligned_be32(buf); } static unsigned int regmap_parse_32_le(const void *buf) { - const __le32 *b = buf; - - return le32_to_cpu(b[0]); + return get_unaligned_le32(buf); } static void regmap_parse_32_be_inplace(void *buf) { - __be32 *b = buf; + u32 v = get_unaligned_be32(buf); - b[0] = be32_to_cpu(b[0]); + memcpy(buf, &v, sizeof(v)); } static void regmap_parse_32_le_inplace(void *buf) { - __le32 *b = buf; + u32 v = get_unaligned_le32(buf); - b[0] = le32_to_cpu(b[0]); + memcpy(buf, &v, sizeof(v)); } static unsigned int regmap_parse_32_native(const void *buf) { - return *(u32 *)buf; + u32 v; + + memcpy(&v, buf, sizeof(v)); + return v; } #ifdef CONFIG_64BIT static unsigned int regmap_parse_64_be(const void *buf) { - const __be64 *b = buf; - - return be64_to_cpu(b[0]); + return get_unaligned_be64(buf); } static unsigned int regmap_parse_64_le(const void *buf) { - const __le64 *b = buf; - - return le64_to_cpu(b[0]); + return get_unaligned_le64(buf); } static void regmap_parse_64_be_inplace(void *buf) { - __be64 *b = buf; + u64 v = get_unaligned_be64(buf); - b[0] = be64_to_cpu(b[0]); + memcpy(buf, &v, sizeof(v)); } static void regmap_parse_64_le_inplace(void *buf) { - __le64 *b = buf; + u64 v = get_unaligned_le64(buf); - b[0] = le64_to_cpu(b[0]); + memcpy(buf, &v, sizeof(v)); } static unsigned int regmap_parse_64_native(const void *buf) { - return *(u64 *)buf; + u64 v; + + memcpy(&v, buf, sizeof(v)); + return v; } #endif From 16accae3d97f97d7f61c4ee5d0002bccdef59088 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Thu, 28 May 2020 13:16:14 -0700 Subject: [PATCH 005/618] perf/x86/rapl: Fix RAPL config variable bug This patch fixes a bug introduced by: fd3ae1e1587d6 ("perf/x86/rapl: Move RAPL support to common x86 code") The Kconfig variable name was wrong. It was missing the CONFIG_ prefix. Signed-off-by: Stephane Eranian Signed-off-by: Ingo Molnar Tested-by: Kim Phillips Acked-by: Peter Zijlstra Link: https://lore.kernel.org/r/20200528201614.250182-1-eranian@google.com --- arch/x86/events/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/events/Makefile b/arch/x86/events/Makefile index 12c42eba77ec..9933c0e8e97a 100644 --- a/arch/x86/events/Makefile +++ b/arch/x86/events/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only obj-y += core.o probe.o -obj-$(PERF_EVENTS_INTEL_RAPL) += rapl.o +obj-$(CONFIG_PERF_EVENTS_INTEL_RAPL) += rapl.o obj-y += amd/ obj-$(CONFIG_X86_LOCAL_APIC) += msr.o obj-$(CONFIG_CPU_SUP_INTEL) += intel/ From 8bdd79dae1ff5397351b95e249abcae126572617 Mon Sep 17 00:00:00 2001 From: Lingling Xu Date: Tue, 2 Jun 2020 16:24:15 +0800 Subject: [PATCH 006/618] spi: sprd: switch the sequence of setting WDG_LOAD_LOW and _HIGH The watchdog counter consists of WDG_LOAD_LOW and WDG_LOAD_HIGH, which would be loaded to watchdog counter once writing WDG_LOAD_LOW. Fixes: ac1775012058 ("spi: sprd: Add the support of restarting the system") Signed-off-by: Lingling Xu Signed-off-by: Chunyan Zhang Link: https://lore.kernel.org/r/20200602082415.5848-1-zhang.lyra@gmail.com Signed-off-by: Mark Brown --- drivers/spi/spi-sprd-adi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-sprd-adi.c b/drivers/spi/spi-sprd-adi.c index 88e6543648cb..bd23c4689b46 100644 --- a/drivers/spi/spi-sprd-adi.c +++ b/drivers/spi/spi-sprd-adi.c @@ -389,9 +389,9 @@ static int sprd_adi_restart_handler(struct notifier_block *this, sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_CTRL, val); /* Load the watchdog timeout value, 50ms is always enough. */ + sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOAD_HIGH, 0); sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOAD_LOW, WDG_LOAD_VAL & WDG_LOAD_MASK); - sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOAD_HIGH, 0); /* Start the watchdog to reset system */ sprd_adi_read(sadi, sadi->slave_pbase + REG_WDG_CTRL, &val); From 0df12a01f4857495816b05f048c4c31439446e35 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 1 Jun 2020 17:18:56 -0700 Subject: [PATCH 007/618] ARM: dts: omap4-droid4: Fix spi configuration and increase rate We can currently sometimes get "RXS timed out" errors and "EOT timed out" errors with spi transfers. These errors can be made easy to reproduce by reading the cpcap iio values in a loop while keeping the CPUs busy by also reading /dev/urandom. The "RXS timed out" errors we can fix by adding spi-cpol and spi-cpha in addition to the spi-cs-high property we already have. The "EOT timed out" errors we can fix by increasing the spi clock rate to 9.6 MHz. Looks similar MC13783 PMIC says it works at spi clock rates up to 20 MHz, so let's assume we can pick any rate up to 20 MHz also for cpcap. Cc: maemo-leste@lists.dyne.org Cc: Merlijn Wajer Cc: Pavel Machek Cc: Sebastian Reichel Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi index e39eee628afd..08a7d3ce383f 100644 --- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi @@ -13,8 +13,10 @@ cpcap: pmic@0 { #interrupt-cells = <2>; #address-cells = <1>; #size-cells = <0>; - spi-max-frequency = <3000000>; + spi-max-frequency = <9600000>; spi-cs-high; + spi-cpol; + spi-cpha; cpcap_adc: adc { compatible = "motorola,mapphone-cpcap-adc"; From d46f9fbec71997420e4fb83c04d9affdf423f879 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sun, 31 May 2020 12:37:54 -0700 Subject: [PATCH 008/618] bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit Some modules reset automatically when idled, and when re-enabled, we must wait for the automatic OCP softreset to complete. And if optional clocks are configured, we need to keep the clocks on while waiting for the reset to complete. Let's fix the issue by moving the OCP softreset code to a separate function sysc_wait_softreset(), and call it also from sysc_enable_module() with the optional clocks enabled. This is based on what we're already doing for legacy platform data booting in _enable_sysc(). Fixes: 7324a7a0d5e2 ("bus: ti-sysc: Implement display subsystem reset quirk") Reported-by: Faiz Abbas Cc: Laurent Pinchart Cc: Tomi Valkeinen Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 80 ++++++++++++++++++++++++++++++++----------- 1 file changed, 60 insertions(+), 20 deletions(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 369c97c3e0c0..a3a2c269e9ad 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -221,6 +221,35 @@ static u32 sysc_read_sysstatus(struct sysc *ddata) return sysc_read(ddata, offset); } +/* Poll on reset status */ +static int sysc_wait_softreset(struct sysc *ddata) +{ + u32 sysc_mask, syss_done, rstval; + int syss_offset, error = 0; + + syss_offset = ddata->offsets[SYSC_SYSSTATUS]; + sysc_mask = BIT(ddata->cap->regbits->srst_shift); + + if (ddata->cfg.quirks & SYSS_QUIRK_RESETDONE_INVERTED) + syss_done = 0; + else + syss_done = ddata->cfg.syss_mask; + + if (syss_offset >= 0) { + error = readx_poll_timeout(sysc_read_sysstatus, ddata, rstval, + (rstval & ddata->cfg.syss_mask) == + syss_done, + 100, MAX_MODULE_SOFTRESET_WAIT); + + } else if (ddata->cfg.quirks & SYSC_QUIRK_RESET_STATUS) { + error = readx_poll_timeout(sysc_read_sysconfig, ddata, rstval, + !(rstval & sysc_mask), + 100, MAX_MODULE_SOFTRESET_WAIT); + } + + return error; +} + static int sysc_add_named_clock_from_child(struct sysc *ddata, const char *name, const char *optfck_name) @@ -925,8 +954,34 @@ static int sysc_enable_module(struct device *dev) struct sysc *ddata; const struct sysc_regbits *regbits; u32 reg, idlemodes, best_mode; + int error; ddata = dev_get_drvdata(dev); + + /* + * Some modules like DSS reset automatically on idle. Enable optional + * reset clocks and wait for OCP softreset to complete. + */ + if (ddata->cfg.quirks & SYSC_QUIRK_OPT_CLKS_IN_RESET) { + error = sysc_enable_opt_clocks(ddata); + if (error) { + dev_err(ddata->dev, + "Optional clocks failed for enable: %i\n", + error); + return error; + } + } + error = sysc_wait_softreset(ddata); + if (error) + dev_warn(ddata->dev, "OCP softreset timed out\n"); + if (ddata->cfg.quirks & SYSC_QUIRK_OPT_CLKS_IN_RESET) + sysc_disable_opt_clocks(ddata); + + /* + * Some subsystem private interconnects, like DSS top level module, + * need only the automatic OCP softreset handling with no sysconfig + * register bits to configure. + */ if (ddata->offsets[SYSC_SYSCONFIG] == -ENODEV) return 0; @@ -1828,11 +1883,10 @@ static int sysc_legacy_init(struct sysc *ddata) */ static int sysc_reset(struct sysc *ddata) { - int sysc_offset, syss_offset, sysc_val, rstval, error = 0; - u32 sysc_mask, syss_done; + int sysc_offset, sysc_val, error; + u32 sysc_mask; sysc_offset = ddata->offsets[SYSC_SYSCONFIG]; - syss_offset = ddata->offsets[SYSC_SYSSTATUS]; if (ddata->legacy_mode || ddata->cap->regbits->srst_shift < 0 || @@ -1841,11 +1895,6 @@ static int sysc_reset(struct sysc *ddata) sysc_mask = BIT(ddata->cap->regbits->srst_shift); - if (ddata->cfg.quirks & SYSS_QUIRK_RESETDONE_INVERTED) - syss_done = 0; - else - syss_done = ddata->cfg.syss_mask; - if (ddata->pre_reset_quirk) ddata->pre_reset_quirk(ddata); @@ -1862,18 +1911,9 @@ static int sysc_reset(struct sysc *ddata) if (ddata->post_reset_quirk) ddata->post_reset_quirk(ddata); - /* Poll on reset status */ - if (syss_offset >= 0) { - error = readx_poll_timeout(sysc_read_sysstatus, ddata, rstval, - (rstval & ddata->cfg.syss_mask) == - syss_done, - 100, MAX_MODULE_SOFTRESET_WAIT); - - } else if (ddata->cfg.quirks & SYSC_QUIRK_RESET_STATUS) { - error = readx_poll_timeout(sysc_read_sysconfig, ddata, rstval, - !(rstval & sysc_mask), - 100, MAX_MODULE_SOFTRESET_WAIT); - } + error = sysc_wait_softreset(ddata); + if (error) + dev_warn(ddata->dev, "OCP softreset timed out\n"); if (ddata->reset_done_quirk) ddata->reset_done_quirk(ddata); From 08b91dd6e547467fad61a7c201ff71080d7ad65a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sun, 31 May 2020 12:37:54 -0700 Subject: [PATCH 009/618] bus: ti-sysc: Ignore clockactivity unless specified as a quirk We must ignore the clockactivity bit for most modules and not set it unless specified for the module with SYSC_QUIRK_USE_CLOCKACT. Otherwise the interface clock can be automatically gated constantly causing unexpected performance issues. Fixes: ae9ae12e9daa ("bus: ti-sysc: Handle clockactivity for enable and disable") Cc: Laurent Pinchart Cc: Tomi Valkeinen Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index a3a2c269e9ad..4f640a635ded 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -988,10 +988,13 @@ static int sysc_enable_module(struct device *dev) regbits = ddata->cap->regbits; reg = sysc_read(ddata, ddata->offsets[SYSC_SYSCONFIG]); - /* Set CLOCKACTIVITY, we only use it for ick */ + /* + * Set CLOCKACTIVITY, we only use it for ick. And we only configure it + * based on the SYSC_QUIRK_USE_CLOCKACT flag, not based on the hardware + * capabilities. See the old HWMOD_SET_DEFAULT_CLOCKACT flag. + */ if (regbits->clkact_shift >= 0 && - (ddata->cfg.quirks & SYSC_QUIRK_USE_CLOCKACT || - ddata->cfg.sysc_val & BIT(regbits->clkact_shift))) + (ddata->cfg.quirks & SYSC_QUIRK_USE_CLOCKACT)) reg |= SYSC_CLOCACT_ICK << regbits->clkact_shift; /* Set SIDLE mode */ From 085bc0e576a4bf53b67a917c54908f299a2fb949 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sun, 31 May 2020 12:37:54 -0700 Subject: [PATCH 010/618] bus: ti-sysc: Fix uninitialized framedonetv_irq We are currently only setting the framedonetv_irq disabled for the SoCs that don't have it. But we are never setting it enabled for the SoCs that have it. Let's initialized it to true by default. Fixes: 7324a7a0d5e2 ("bus: ti-sysc: Implement display subsystem reset quirk") Cc: Laurent Pinchart Cc: Tomi Valkeinen Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 4f640a635ded..db9541f38505 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1552,7 +1552,7 @@ static u32 sysc_quirk_dispc(struct sysc *ddata, int dispc_offset, bool lcd_en, digit_en, lcd2_en = false, lcd3_en = false; const int lcd_en_mask = BIT(0), digit_en_mask = BIT(1); int manager_count; - bool framedonetv_irq; + bool framedonetv_irq = true; u32 val, irq_mask = 0; switch (sysc_soc->soc) { @@ -1569,6 +1569,7 @@ static u32 sysc_quirk_dispc(struct sysc *ddata, int dispc_offset, break; case SOC_AM4: manager_count = 1; + framedonetv_irq = false; break; case SOC_UNKNOWN: default: From 77cad9dbc957f23a73169e8a8971186744296614 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 27 May 2020 16:32:06 -0700 Subject: [PATCH 011/618] ARM: OMAP2+: Fix legacy mode dss_reset We must check for "dss_core" instead of "dss" to avoid also matching also "dss_dispc". This only matters for the mixed case of data configured in device tree but with legacy booting ti,hwmods property still enabled. Fixes: 8b30919a4e3c ("ARM: OMAP2+: Handle reset quirks for dynamically allocated modules") Cc: Laurent Pinchart Cc: Tomi Valkeinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 82706af307de..c630457bb228 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -3489,7 +3489,7 @@ static const struct omap_hwmod_reset dra7_reset_quirks[] = { }; static const struct omap_hwmod_reset omap_reset_quirks[] = { - { .match = "dss", .len = 3, .reset = omap_dss_reset, }, + { .match = "dss_core", .len = 8, .reset = omap_dss_reset, }, { .match = "hdq1w", .len = 5, .reset = omap_hdq1w_reset, }, { .match = "i2c", .len = 3, .reset = omap_i2c_reset, }, { .match = "wd_timer", .len = 8, .reset = omap2_wd_timer_reset, }, From 636338d7968e47c7f2e0b772a2a825ad932883fb Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 3 Jun 2020 15:02:20 -0700 Subject: [PATCH 012/618] bus: ti-sysc: Increase max softreset wait Otherwise we can get "OCP softreset timed out" warnings occasionally at least for i2c2 on omap4 now that we check the OCP softreset completed bit on enable. Reported-by: Merlijn Wajer Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index db9541f38505..6886bdd225b6 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -29,7 +29,7 @@ #define SOC_FLAG(match, flag) { .machine = match, .data = (void *)(flag), } -#define MAX_MODULE_SOFTRESET_WAIT 10000 +#define MAX_MODULE_SOFTRESET_WAIT 20000 enum sysc_soc { SOC_UNKNOWN, From 94579ac3f6d0820adc83b5dc5358ead0158101e9 Mon Sep 17 00:00:00 2001 From: Huy Nguyen Date: Mon, 1 Jun 2020 16:39:37 -0500 Subject: [PATCH 013/618] xfrm: Fix double ESP trailer insertion in IPsec crypto offload. During IPsec performance testing, we see bad ICMP checksum. The error packet has duplicated ESP trailer due to double validate_xmit_xfrm calls. The first call is from ip_output, but the packet cannot be sent because netif_xmit_frozen_or_stopped is true and the packet gets dev_requeue_skb. The second call is from NET_TX softirq. However after the first call, the packet already has the ESP trailer. Fix by marking the skb with XFRM_XMIT bit after the packet is handled by validate_xmit_xfrm to avoid duplicate ESP trailer insertion. Fixes: f6e27114a60a ("net: Add a xfrm validate function to validate_xmit_skb") Signed-off-by: Huy Nguyen Reviewed-by: Boris Pismenny Reviewed-by: Raed Salem Reviewed-by: Saeed Mahameed Signed-off-by: Steffen Klassert --- include/net/xfrm.h | 1 + net/xfrm/xfrm_device.c | 4 +++- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 094fe682f5d7..c7d213c9f9d8 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -1008,6 +1008,7 @@ struct xfrm_offload { #define XFRM_GRO 32 #define XFRM_ESP_NO_TRAILER 64 #define XFRM_DEV_RESUME 128 +#define XFRM_XMIT 256 __u32 status; #define CRYPTO_SUCCESS 1 diff --git a/net/xfrm/xfrm_device.c b/net/xfrm/xfrm_device.c index f50d1f97cf8e..626096bd0d29 100644 --- a/net/xfrm/xfrm_device.c +++ b/net/xfrm/xfrm_device.c @@ -108,7 +108,7 @@ struct sk_buff *validate_xmit_xfrm(struct sk_buff *skb, netdev_features_t featur struct xfrm_offload *xo = xfrm_offload(skb); struct sec_path *sp; - if (!xo) + if (!xo || (xo->flags & XFRM_XMIT)) return skb; if (!(features & NETIF_F_HW_ESP)) @@ -129,6 +129,8 @@ struct sk_buff *validate_xmit_xfrm(struct sk_buff *skb, netdev_features_t featur return skb; } + xo->flags |= XFRM_XMIT; + if (skb_is_gso(skb)) { struct net_device *dev = skb->dev; From 38ac46002d1df5707566a73486452851341028d2 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Wed, 3 Jun 2020 17:22:37 +0100 Subject: [PATCH 014/618] arm: dts: vexpress: Move mcc node back into motherboard node Commit d9258898ad49 ("arm64: dts: arm: vexpress: Move fixed devices out of bus node") moved the "mcc" DT node into the root node, because it does not have any children using "reg" properties, so does violate some dtc checks about "simple-bus" nodes. However this broke the vexpress config-bus code, which walks up the device tree to find the first node with an "arm,vexpress,site" property. This gave the wrong result (matching the root node instead of the motherboard node), so broke the clocks and some other devices for VExpress boards. Move the whole node back into its original position. This re-introduces the dtc warning, but is conceptually the right thing to do. The dtc warning seems to be overzealous here, there are discussions on fixing or relaxing this check instead. Link: https://lore.kernel.org/r/20200603162237.16319-1-andre.przywara@arm.com Fixes: d9258898ad49 ("arm64: dts: vexpress: Move fixed devices out of bus node") Reported-and-tested-by: Guenter Roeck Signed-off-by: Andre Przywara Signed-off-by: Sudeep Holla --- arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 146 ++++++++++++------------ 1 file changed, 73 insertions(+), 73 deletions(-) diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index e6308fb76183..a88ee5294d35 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -100,79 +100,6 @@ led-8 { }; }; - mcc { - compatible = "arm,vexpress,config-bus"; - arm,vexpress,config-bridge = <&v2m_sysreg>; - - oscclk0 { - /* MCC static memory clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 0>; - freq-range = <25000000 60000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk0"; - }; - - v2m_oscclk1: oscclk1 { - /* CLCD clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 1>; - freq-range = <23750000 65000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk1"; - }; - - v2m_oscclk2: oscclk2 { - /* IO FPGA peripheral clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 2>; - freq-range = <24000000 24000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk2"; - }; - - volt-vio { - /* Logic level voltage */ - compatible = "arm,vexpress-volt"; - arm,vexpress-sysreg,func = <2 0>; - regulator-name = "VIO"; - regulator-always-on; - label = "VIO"; - }; - - temp-mcc { - /* MCC internal operating temperature */ - compatible = "arm,vexpress-temp"; - arm,vexpress-sysreg,func = <4 0>; - label = "MCC"; - }; - - reset { - compatible = "arm,vexpress-reset"; - arm,vexpress-sysreg,func = <5 0>; - }; - - muxfpga { - compatible = "arm,vexpress-muxfpga"; - arm,vexpress-sysreg,func = <7 0>; - }; - - shutdown { - compatible = "arm,vexpress-shutdown"; - arm,vexpress-sysreg,func = <8 0>; - }; - - reboot { - compatible = "arm,vexpress-reboot"; - arm,vexpress-sysreg,func = <9 0>; - }; - - dvimode { - compatible = "arm,vexpress-dvimode"; - arm,vexpress-sysreg,func = <11 0>; - }; - }; - bus@8000000 { motherboard-bus { model = "V2M-P1"; @@ -435,6 +362,79 @@ clcd_pads: endpoint { }; }; }; + + mcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + oscclk0 { + /* MCC static memory clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <25000000 60000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk0"; + }; + + v2m_oscclk1: oscclk1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 65000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; + + v2m_oscclk2: oscclk2 { + /* IO FPGA peripheral clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <24000000 24000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk2"; + }; + + volt-vio { + /* Logic level voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "VIO"; + regulator-always-on; + label = "VIO"; + }; + + temp-mcc { + /* MCC internal operating temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "MCC"; + }; + + reset { + compatible = "arm,vexpress-reset"; + arm,vexpress-sysreg,func = <5 0>; + }; + + muxfpga { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; + + shutdown { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; + + reboot { + compatible = "arm,vexpress-reboot"; + arm,vexpress-sysreg,func = <9 0>; + }; + + dvimode { + compatible = "arm,vexpress-dvimode"; + arm,vexpress-sysreg,func = <11 0>; + }; + }; }; }; }; From a4902d914e508f3691fa7ef885a76d2b7e735805 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 11 May 2020 13:00:15 +1000 Subject: [PATCH 015/618] xfrm: merge fixup for "remove output_finish indirection from xfrm_state_afinfo" Signed-off-by: Stephen Rothwell Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_output.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c index e4c23f69f69f..a7ab19353313 100644 --- a/net/xfrm/xfrm_output.c +++ b/net/xfrm/xfrm_output.c @@ -574,16 +574,12 @@ int xfrm_output(struct sock *sk, struct sk_buff *skb) switch (x->outer_mode.family) { case AF_INET: memset(IPCB(skb), 0, sizeof(*IPCB(skb))); -#ifdef CONFIG_NETFILTER IPCB(skb)->flags |= IPSKB_XFRM_TRANSFORMED; -#endif break; case AF_INET6: memset(IP6CB(skb), 0, sizeof(*IP6CB(skb))); -#ifdef CONFIG_NETFILTER IP6CB(skb)->flags |= IP6SKB_XFRM_TRANSFORMED; -#endif break; } From e680a4098f6404191e0e438a9758715b0bff6d7f Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Sun, 7 Jun 2020 11:34:21 +0200 Subject: [PATCH 016/618] regmap: fix the kerneldoc for regmap_test_bits() The kerneldoc comment for regmap_test_bits() says that it returns -1 on regmap_read() failure. This is not true - it will propagate the error code returned by regmap_read(). Fix it. Fixes: aa2ff9dbaedd ("regmap: provide helpers for simple bit operations") Signed-off-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20200607093421.22209-1-brgl@bgdev.pl Signed-off-by: Mark Brown --- drivers/base/regmap/regmap.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 22d125da4a7d..183ec789c3fd 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -2936,8 +2936,9 @@ EXPORT_SYMBOL_GPL(regmap_update_bits_base); * @reg: Register to read from * @bits: Bits to test * - * Returns -1 if the underlying regmap_read() fails, 0 if at least one of the - * tested bits is not set and 1 if all tested bits are set. + * Returns 0 if at least one of the tested bits is not set, 1 if all tested + * bits are set and a negative error number if the underlying regmap_read() + * fails. */ int regmap_test_bits(struct regmap *map, unsigned int reg, unsigned int bits) { From 9ec8ade812240f3ef553b5e8bfc74deec3f14339 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 8 Jun 2020 12:00:49 +0200 Subject: [PATCH 017/618] spi: spidev_test: Use %u to format unsigned numbers Consistently use %u to format unsigned numbers. For "bits" this doesn't matter that much, as it is "uint8_t". However, "speed" is "uint32_t", so in case people use "-s -1" to force the maximum, they would see: max speed: -1 Hz (4294967 KHz) While at it, use "k" (kilo) instead of "K" (kelvin) in "kHz". Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20200608100049.30648-1-geert+renesas@glider.be Signed-off-by: Mark Brown --- tools/spi/spidev_test.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/spi/spidev_test.c b/tools/spi/spidev_test.c index eec23fa693bd..56ea053f72f2 100644 --- a/tools/spi/spidev_test.c +++ b/tools/spi/spidev_test.c @@ -461,8 +461,8 @@ int main(int argc, char *argv[]) pabort("can't get max speed hz"); printf("spi mode: 0x%x\n", mode); - printf("bits per word: %d\n", bits); - printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000); + printf("bits per word: %u\n", bits); + printf("max speed: %u Hz (%u kHz)\n", speed, speed/1000); if (input_tx) transfer_escaped_string(fd, input_tx); From 3f311e8993ed18fb7325373ec0f82a7f8e8be82e Mon Sep 17 00:00:00 2001 From: Oskar Holmlund Date: Fri, 5 Jun 2020 19:49:23 +0200 Subject: [PATCH 018/618] ARM: dts: Fix am33xx.dtsi USB ranges length AM335x TRM: Table 2-1 defines USBSS - USB Queue Manager in memory region 0x4740 0000 to 0x4740 7FFF. Looks like the older TRM revisions list the range from 0x5000 to 0x8000 as reserved. Fixes: 0782e8572ce4 ("ARM: dts: Probe am335x musb with ti-sysc") Signed-off-by: Oskar Holmlund [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index a35f5052d76f..be76ded7e4c0 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -347,7 +347,7 @@ usb: target-module@47400000 { clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x47400000 0x5000>; + ranges = <0x0 0x47400000 0x8000>; usb0_phy: usb-phy@1300 { compatible = "ti,am335x-usb-phy"; From 9f872f924545324a06fa216ad38132804c20f2db Mon Sep 17 00:00:00 2001 From: Oskar Holmlund Date: Fri, 5 Jun 2020 19:51:09 +0200 Subject: [PATCH 019/618] ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag AM335x TRM: Figure 16-23 define sysconfig register and soft_reset are in first position corresponding to SYSC_OMAP4_SOFTRESET defined in ti-sysc.h. Fixes: 0782e8572ce4 ("ARM: dts: Probe am335x musb with ti-sysc") Signed-off-by: Oskar Holmlund Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index be76ded7e4c0..ed6634d34c3c 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -335,7 +335,7 @@ usb: target-module@47400000 { <0x47400010 0x4>; reg-names = "rev", "sysc"; ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | - SYSC_OMAP2_SOFTRESET)>; + SYSC_OMAP4_SOFTRESET)>; ti,sysc-midle = , , ; From ebf89ed78b6ad6bc53f49a9dc0754fa97bb11e4a Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 5 Jun 2020 17:13:46 -0500 Subject: [PATCH 020/618] ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks The commit 5390130f3b28 ("ARM: dts: dra7: add timer_sys_ck entries for IPU/DSP timers") was added to allow the OMAP clocksource timer driver to use the clock aliases when reconfiguring the parent clock source for the timer functional clocks after the timer_sys_ck clock aliases got cleaned up in commit a8202cd5174d ("clk: ti: dra7: drop unnecessary clock aliases"). The above patch however has missed adding the entries for couple of timers (14, 15 and 16), and also added erroneously in the parent ti-sysc nodes for couple of clocks (timers 4, 5 and 6). Fix these properly, so that any of these timers can be used with OMAP remoteproc IPU and DSP devices. The always-on timers 1 and 12 are not expected to use this clock source, so they are not modified. Fixes: 5390130f3b28 ("ARM: dts: dra7: add timer_sys_ck entries for IPU/DSP timers") Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-l4.dtsi | 34 ++++++++++++++++------------------ 1 file changed, 16 insertions(+), 18 deletions(-) diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 1abd455cf15a..e059054d9110 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -1210,9 +1210,8 @@ target-module@36000 { /* 0x48036000, ap 9 4e.0 */ , ; /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ - clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>, - <&timer_sys_clk_div>; - clock-names = "fck", "timer_sys_ck"; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x36000 0x1000>; @@ -3355,8 +3354,8 @@ target-module@20000 { /* 0x48820000, ap 5 08.0 */ , ; /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ - clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 0>, <&timer_sys_clk_div>; - clock-names = "fck", "timer_sys_ck"; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x20000 0x1000>; @@ -3364,8 +3363,8 @@ target-module@20000 { /* 0x48820000, ap 5 08.0 */ timer5: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; }; }; @@ -3382,9 +3381,8 @@ target-module@22000 { /* 0x48822000, ap 7 24.0 */ , ; /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ - clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 0>, - <&timer_sys_clk_div>; - clock-names = "fck", "timer_sys_ck"; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x22000 0x1000>; @@ -3392,8 +3390,8 @@ target-module@22000 { /* 0x48822000, ap 7 24.0 */ timer6: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; }; }; @@ -3501,8 +3499,8 @@ target-module@2a000 { /* 0x4882a000, ap 15 10.0 */ timer14: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-pwm; }; @@ -3529,8 +3527,8 @@ target-module@2c000 { /* 0x4882c000, ap 17 02.0 */ timer15: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-pwm; }; @@ -3557,8 +3555,8 @@ target-module@2e000 { /* 0x4882e000, ap 19 14.0 */ timer16: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-pwm; }; From 8e326a8bdef3fb42b92bf2742e8405d9b9209367 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 5 Jun 2020 17:13:47 -0500 Subject: [PATCH 021/618] ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes The mailbox nodes defined in various dts files have been moved to common dra7-ipu-dsp-common.dtsi and dra74-ipu-dsp-common.dtsi files in commit a11a2f73b32d ("ARM: dts: dra7-ipu-dsp-common: Move mailboxes into common files"), but the nodes were erroneously left out in the dra7-evm-common.dtsi file. Fix this by removing these duplicate nodes. Fixes: a11a2f73b32d ("ARM: dts: dra7-ipu-dsp-common: Move mailboxes into common files") Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm-common.dtsi | 20 -------------------- 1 file changed, 20 deletions(-) diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index 23244b5a9942..488201f0ac95 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -244,26 +244,6 @@ &mcasp3 { rx-num-evt = <32>; }; -&mailbox5 { - status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; -}; - -&mailbox6 { - status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { - status = "okay"; - }; -}; - &pcie1_rc { status = "okay"; }; From e0fe70051f12c25c4afb04cb10ca8648c6e761cf Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 8 Jun 2020 11:59:34 +0200 Subject: [PATCH 022/618] spi: rspi: Use requested instead of maximum bit rate Currently, the RSPI driver always tries to use the maximum configured bit rate for communicating with a slave device, even if the transfer(s) in the current message specify a lower rate. Use the mininum rate specified in the message instead. Rename rspi_data.max_speed_hz accordingly. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20200608095940.30516-3-geert+renesas@glider.be Signed-off-by: Mark Brown --- drivers/spi/spi-rspi.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 06192c9ea813..cbc2387d450c 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -179,7 +179,7 @@ struct rspi_data { void __iomem *addr; - u32 max_speed_hz; + u32 speed_hz; struct spi_controller *ctlr; struct platform_device *pdev; wait_queue_head_t wait; @@ -258,8 +258,7 @@ static int rspi_set_config_register(struct rspi_data *rspi, int access_size) rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR); /* Sets transfer bit rate */ - spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk), - 2 * rspi->max_speed_hz) - 1; + spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk), 2 * rspi->speed_hz) - 1; rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR); /* Disable dummy transmission, set 16-bit word access, 1 frame */ @@ -299,14 +298,14 @@ static int rspi_rz_set_config_register(struct rspi_data *rspi, int access_size) clksrc = clk_get_rate(rspi->clk); while (div < 3) { - if (rspi->max_speed_hz >= clksrc/4) /* 4=(CLK/2)/2 */ + if (rspi->speed_hz >= clksrc/4) /* 4=(CLK/2)/2 */ break; div++; clksrc /= 2; } /* Sets transfer bit rate */ - spbr = DIV_ROUND_UP(clksrc, 2 * rspi->max_speed_hz) - 1; + spbr = DIV_ROUND_UP(clksrc, 2 * rspi->speed_hz) - 1; rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR); rspi->spcmd |= div << 2; @@ -341,7 +340,7 @@ static int qspi_set_config_register(struct rspi_data *rspi, int access_size) rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR); /* Sets transfer bit rate */ - spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk), 2 * rspi->max_speed_hz); + spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk), 2 * rspi->speed_hz); rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR); /* Disable dummy transmission, set byte access */ @@ -949,9 +948,24 @@ static int rspi_prepare_message(struct spi_controller *ctlr, { struct rspi_data *rspi = spi_controller_get_devdata(ctlr); struct spi_device *spi = msg->spi; + const struct spi_transfer *xfer; int ret; - rspi->max_speed_hz = spi->max_speed_hz; + /* + * As the Bit Rate Register must not be changed while the device is + * active, all transfers in a message must use the same bit rate. + * In theory, the sequencer could be enabled, and each Command Register + * could divide the base bit rate by a different value. + * However, most RSPI variants do not have Transfer Data Length + * Multiplier Setting Registers, so each sequence step would be limited + * to a single word, making this feature unsuitable for large + * transfers, which would gain most from it. + */ + rspi->speed_hz = spi->max_speed_hz; + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + if (xfer->speed_hz < rspi->speed_hz) + rspi->speed_hz = xfer->speed_hz; + } rspi->spcmd = SPCMD_SSLKP; if (spi->mode & SPI_CPOL) From 6a47d6efc6931b02d10163de2fb85ec9953c4f5e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 5 May 2020 16:00:11 +0200 Subject: [PATCH 023/618] fpga: zynqmp: fix modular build Two symbols need to be exported to allow the zynqmp-fpga module to get loaded dynamically: ERROR: modpost: "zynqmp_pm_fpga_load" [drivers/fpga/zynqmp-fpga.ko] undefined! ERROR: modpost: "zynqmp_pm_fpga_get_status" [drivers/fpga/zynqmp-fpga.ko] undefined! To ensure this is done correctly, also fix the Kconfig dependency to only allow building the fpga driver when the firmware driver is either disabled, or when it is reachable. With that, the dependency on the SoC itself can be removed, and there are no surprises when the fpga driver is built-in but the firmware a module. Fixes: 4db8180ffe7c ("firmware: xilinx: Remove eemi ops for fpga related APIs") Signed-off-by: Arnd Bergmann Signed-off-by: Moritz Fischer --- drivers/fpga/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index 72380e1d31c7..37d2d49f179b 100644 --- a/drivers/fpga/Kconfig +++ b/drivers/fpga/Kconfig @@ -208,7 +208,7 @@ config FPGA_DFL_PCI config FPGA_MGR_ZYNQMP_FPGA tristate "Xilinx ZynqMP FPGA" - depends on ARCH_ZYNQMP || COMPILE_TEST + depends on ZYNQMP_FIRMWARE || (!ZYNQMP_FIRMWARE && COMPILE_TEST) help FPGA manager driver support for Xilinx ZynqMP FPGAs. This driver uses the processor configuration port(PCAP) From f9639f9a779ac0381cabfb793915851a89424f9f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 9 Jun 2020 13:29:58 +0300 Subject: [PATCH 024/618] ARM: dts: am437x-sk-evm: remove lcd timings LCD timings now come from panel-simple. Having timings in the DT will cause a WARN. Signed-off-by: Tomi Valkeinen Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-sk-evm.dts | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 4d5a7ca2e25d..6c83812407bf 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -134,22 +134,6 @@ lcd0: display { enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - panel-timing { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <2>; - hback-porch = <2>; - hsync-len = <41>; - vfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - port { lcd_in: endpoint { remote-endpoint = <&dpi_out>; From a575357b6435c6dd988b8194c59eec83f6e5d5af Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Tue, 9 Jun 2020 18:55:27 +0200 Subject: [PATCH 025/618] spi: dt-bindings: amlogic, meson-gx-spicc: Fix schema for meson-g12a spi@13000: clock-names: Additional items are not allowed ('pclk' was unexpected) spi@13000: clock-names: ['core', 'pclk'] is too long spi@13000: clocks: [[2, 23], [2, 258]] is too long spi@15000: clock-names: Additional items are not allowed ('pclk' was unexpected) spi@15000: clock-names: ['core', 'pclk'] is too long spi@15000: clocks: [[2, 29], [2, 261]] is too long Conditional schema properties don't overwrite others. Instead of restrictions have to be validated. So general clock amount is 1-2 and depending on the actual device type limit the mount to 1 or 2. Signed-off-by: Alexander Stein Link: https://lore.kernel.org/r/20200609165527.55183-1-alexander.stein@mailbox.org Signed-off-by: Mark Brown --- .../bindings/spi/amlogic,meson-gx-spicc.yaml | 26 ++++++++++++------- 1 file changed, 17 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index 9147df29022a..38efb50081e3 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -34,12 +34,15 @@ properties: maxItems: 1 clocks: - maxItems: 1 + minItems: 1 + maxItems: 2 + items: + - description: controller register bus clock + - description: baud rate generator and delay control clock clock-names: - description: input clock for the baud rate generator - items: - - const: core + minItems: 1 + maxItems: 2 if: properties: @@ -51,17 +54,22 @@ if: then: properties: clocks: - contains: - items: - - description: controller register bus clock - - description: baud rate generator and delay control clock + minItems: 2 clock-names: - minItems: 2 items: - const: core - const: pclk +else: + properties: + clocks: + maxItems: 1 + + clock-names: + items: + - const: core + required: - compatible - reg From 3991510bf6402b534f158e164569d051bfd81f68 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 9 Jun 2020 13:29:59 +0300 Subject: [PATCH 026/618] ARM: dts: am437x-gp-evm: remove lcd timings LCD timings now come from panel-simple. Having timings in the DT will cause a WARN. Signed-off-by: Tomi Valkeinen Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-gp-evm.dts | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index d692e3b2812a..2ff9485c28a4 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -91,22 +91,6 @@ lcd0: display { backlight = <&lcd_bl>; - panel-timing { - clock-frequency = <33000000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <210>; - hback-porch = <16>; - hsync-len = <30>; - vback-porch = <10>; - vfront-porch = <22>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - port { lcd_in: endpoint { remote-endpoint = <&dpi_out>; From 944021e79e7ec8db9c3edbc6af32276ade4ac0db Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 9 Jun 2020 13:30:00 +0300 Subject: [PATCH 027/618] ARM: dts: am437x-epos-evm: remove lcd timings LCD timings now come from panel-simple. Having timings in the DT will cause a WARN. Signed-off-by: Tomi Valkeinen Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am43x-epos-evm.dts | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 27259fd6f741..7d4e0dffde7a 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -47,22 +47,6 @@ lcd0: display { backlight = <&lcd_bl>; - panel-timing { - clock-frequency = <33000000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <210>; - hback-porch = <16>; - hsync-len = <30>; - vback-porch = <10>; - vfront-porch = <22>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - port { lcd_in: endpoint { remote-endpoint = <&dpi_out>; From e4a8fc054340f4df761f6a73335f8fdc0b7ac4fd Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 10 Jun 2020 15:31:54 -0700 Subject: [PATCH 028/618] Revert "bus: ti-sysc: Increase max softreset wait" This reverts commit 636338d7968e47c7f2e0b772a2a825ad932883fb. This patch is not a proper fixes the i2c2 timeouts are still happening in some cases. Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 6886bdd225b6..db9541f38505 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -29,7 +29,7 @@ #define SOC_FLAG(match, flag) { .machine = match, .data = (void *)(flag), } -#define MAX_MODULE_SOFTRESET_WAIT 20000 +#define MAX_MODULE_SOFTRESET_WAIT 10000 enum sysc_soc { SOC_UNKNOWN, From 4008b29eb47433c15ed3f242ee0132ba27dbdb67 Mon Sep 17 00:00:00 2001 From: Steve Lee Date: Thu, 11 Jun 2020 18:48:00 +0900 Subject: [PATCH 029/618] ASoC: max98390: Update regmap readable reg and volatile Update max98390_readable_register and max98390_volatile_reg Signed-off-by: Steve Lee Link: https://lore.kernel.org/r/20200611094800.18422-1-steves.lee@maximintegrated.com Signed-off-by: Mark Brown --- sound/soc/codecs/max98390.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/max98390.c b/sound/soc/codecs/max98390.c index 0d63ebfbff2f..e6613b52bd78 100644 --- a/sound/soc/codecs/max98390.c +++ b/sound/soc/codecs/max98390.c @@ -700,8 +700,8 @@ static bool max98390_readable_register(struct device *dev, unsigned int reg) case MAX98390_IRQ_CTRL ... MAX98390_WDOG_CTRL: case MAX98390_MEAS_ADC_THERM_WARN_THRESH ... MAX98390_BROWNOUT_INFINITE_HOLD: - case MAX98390_BROWNOUT_LVL_HOLD ... THERMAL_COILTEMP_RD_BACK_BYTE0: - case DSMIG_DEBUZZER_THRESHOLD ... MAX98390_R24FF_REV_ID: + case MAX98390_BROWNOUT_LVL_HOLD ... DSMIG_DEBUZZER_THRESHOLD: + case DSM_VOL_ENA ... MAX98390_R24FF_REV_ID: return true; default: return false; @@ -717,7 +717,7 @@ static bool max98390_volatile_reg(struct device *dev, unsigned int reg) case MAX98390_BROWNOUT_LOWEST_STATUS: case MAX98390_ENV_TRACK_BOOST_VOUT_READ: case DSM_STBASS_HPF_B0_BYTE0 ... DSM_DEBUZZER_ATTACK_TIME_BYTE2: - case THERMAL_RDC_RD_BACK_BYTE1 ... THERMAL_COILTEMP_RD_BACK_BYTE0: + case THERMAL_RDC_RD_BACK_BYTE1 ... DSMIG_DEBUZZER_THRESHOLD: case DSM_THERMAL_GAIN ... DSM_WBDRC_GAIN: return true; default: From 6476b60f32866be49d05e2e0163f337374c55b06 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Thu, 11 Jun 2020 13:41:53 +0100 Subject: [PATCH 030/618] ASoC: q6asm: handle EOS correctly Successful send of EOS command does not indicate that EOS is actually finished, correct event to wait EOS is finished is EOS_RENDERED event. EOS_RENDERED means that the DSP has finished processing all the buffers for that particular session and stream. This patch fixes EOS handling! Fixes: 68fd8480bb7b ("ASoC: qdsp6: q6asm: Add support to audio stream apis") Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20200611124159.20742-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6asm.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c index 0e0e8f7a460a..ae4b2cabdf2d 100644 --- a/sound/soc/qcom/qdsp6/q6asm.c +++ b/sound/soc/qcom/qdsp6/q6asm.c @@ -25,6 +25,7 @@ #define ASM_STREAM_CMD_FLUSH 0x00010BCE #define ASM_SESSION_CMD_PAUSE 0x00010BD3 #define ASM_DATA_CMD_EOS 0x00010BDB +#define ASM_DATA_EVENT_RENDERED_EOS 0x00010C1C #define ASM_NULL_POPP_TOPOLOGY 0x00010C68 #define ASM_STREAM_CMD_FLUSH_READBUFS 0x00010C09 #define ASM_STREAM_CMD_SET_ENCDEC_PARAM 0x00010C10 @@ -622,9 +623,6 @@ static int32_t q6asm_stream_callback(struct apr_device *adev, case ASM_SESSION_CMD_SUSPEND: client_event = ASM_CLIENT_EVENT_CMD_SUSPEND_DONE; break; - case ASM_DATA_CMD_EOS: - client_event = ASM_CLIENT_EVENT_CMD_EOS_DONE; - break; case ASM_STREAM_CMD_FLUSH: client_event = ASM_CLIENT_EVENT_CMD_FLUSH_DONE; break; @@ -727,6 +725,9 @@ static int32_t q6asm_stream_callback(struct apr_device *adev, spin_unlock_irqrestore(&ac->lock, flags); } + break; + case ASM_DATA_EVENT_RENDERED_EOS: + client_event = ASM_CLIENT_EVENT_CMD_EOS_DONE; break; } From bd2077915bfebf6965480753f9dd6a8319d06d14 Mon Sep 17 00:00:00 2001 From: Qing Zhang Date: Thu, 11 Jun 2020 20:56:51 +0800 Subject: [PATCH 031/618] spi: tools: Make default_tx/rx and input_tx static Fix the following sparse warning: ./spidev_test.c:50:9: warning: symbol 'default_tx' was not declared. Should it be static? ./spidev_test.c:59:9: warning: symbol 'default_rx' was not declared. Should it be static? ./spidev_test.c:60:6: warning: symbol 'input_tx' was not declared. Should it be static? Signed-off-by: Qing Zhang Link: https://lore.kernel.org/r/1591880212-13479-1-git-send-email-zhangqing@loongson.cn Signed-off-by: Mark Brown --- tools/spi/spidev_test.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/spi/spidev_test.c b/tools/spi/spidev_test.c index 56ea053f72f2..83844f8b862a 100644 --- a/tools/spi/spidev_test.c +++ b/tools/spi/spidev_test.c @@ -47,7 +47,7 @@ static int transfer_size; static int iterations; static int interval = 5; /* interval in seconds for showing transfer rate */ -uint8_t default_tx[] = { +static uint8_t default_tx[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x40, 0x00, 0x00, 0x00, 0x00, 0x95, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, @@ -56,8 +56,8 @@ uint8_t default_tx[] = { 0xF0, 0x0D, }; -uint8_t default_rx[ARRAY_SIZE(default_tx)] = {0, }; -char *input_tx; +static uint8_t default_rx[ARRAY_SIZE(default_tx)] = {0, }; +static char *input_tx; static void hex_dump(const void *src, size_t length, size_t line_size, char *prefix) From 7bb64402a092136fb2fda995b0e0304b43c163c5 Mon Sep 17 00:00:00 2001 From: Qing Zhang Date: Thu, 11 Jun 2020 20:56:52 +0800 Subject: [PATCH 032/618] spi: tools: Add macro definitions to fix build errors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add SPI_TX_OCTAL and SPI_RX_OCTAL to fix the following build errors: CC spidev_test.o spidev_test.c: In function ‘transfer’: spidev_test.c:131:13: error: ‘SPI_TX_OCTAL’ undeclared (first use in this function) if (mode & SPI_TX_OCTAL) ^ spidev_test.c:131:13: note: each undeclared identifier is reported only once for each function it appears in spidev_test.c:137:13: error: ‘SPI_RX_OCTAL’ undeclared (first use in this function) if (mode & SPI_RX_OCTAL) ^ spidev_test.c: In function ‘parse_opts’: spidev_test.c:290:12: error: ‘SPI_TX_OCTAL’ undeclared (first use in this function) mode |= SPI_TX_OCTAL; ^ spidev_test.c:308:12: error: ‘SPI_RX_OCTAL’ undeclared (first use in this function) mode |= SPI_RX_OCTAL; ^ LD spidev_test-in.o ld: cannot find spidev_test.o: No such file or directory Additionally, maybe SPI_CS_WORD and SPI_3WIRE_HIZ will be used in the future, so add them too. Fixes: 896fa735084e ("spi: spidev_test: Add support for Octal mode data transfers") Signed-off-by: Qing Zhang Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/1591880212-13479-2-git-send-email-zhangqing@loongson.cn Signed-off-by: Mark Brown --- include/uapi/linux/spi/spidev.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/uapi/linux/spi/spidev.h b/include/uapi/linux/spi/spidev.h index ee0f2460bff6..9390615d52f0 100644 --- a/include/uapi/linux/spi/spidev.h +++ b/include/uapi/linux/spi/spidev.h @@ -48,6 +48,10 @@ #define SPI_TX_QUAD 0x200 #define SPI_RX_DUAL 0x400 #define SPI_RX_QUAD 0x800 +#define SPI_CS_WORD 0x1000 +#define SPI_TX_OCTAL 0x2000 +#define SPI_RX_OCTAL 0x4000 +#define SPI_3WIRE_HIZ 0x8000 /*---------------------------------------------------------------------------*/ From 03fe7aaf0c3d40ef7feff2bdc7180c146989586a Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 10 Jun 2020 17:41:57 +0200 Subject: [PATCH 033/618] spi: spi-fsl-dspi: Free DMA memory with matching function Driver allocates DMA memory with dma_alloc_coherent() but frees it with dma_unmap_single(). This causes DMA warning during system shutdown (with DMA debugging) on Toradex Colibri VF50 module: WARNING: CPU: 0 PID: 1 at ../kernel/dma/debug.c:1036 check_unmap+0x3fc/0xb04 DMA-API: fsl-edma 40098000.dma-controller: device driver frees DMA memory with wrong function [device address=0x0000000087040000] [size=8 bytes] [mapped as coherent] [unmapped as single] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) (unwind_backtrace) from [<8010bb34>] (show_stack+0x10/0x14) (show_stack) from [<8011ced8>] (__warn+0xf0/0x108) (__warn) from [<8011cf64>] (warn_slowpath_fmt+0x74/0xb8) (warn_slowpath_fmt) from [<8017d170>] (check_unmap+0x3fc/0xb04) (check_unmap) from [<8017d900>] (debug_dma_unmap_page+0x88/0x90) (debug_dma_unmap_page) from [<80601d68>] (dspi_release_dma+0x88/0x110) (dspi_release_dma) from [<80601e4c>] (dspi_shutdown+0x5c/0x80) (dspi_shutdown) from [<805845f8>] (device_shutdown+0x17c/0x220) (device_shutdown) from [<80143ef8>] (kernel_restart+0xc/0x50) (kernel_restart) from [<801441cc>] (__do_sys_reboot+0x18c/0x210) (__do_sys_reboot) from [<80100060>] (ret_fast_syscall+0x0/0x28) DMA-API: Mapped at: dma_alloc_attrs+0xa4/0x130 dspi_probe+0x568/0x7b4 platform_drv_probe+0x6c/0xa4 really_probe+0x208/0x348 driver_probe_device+0x5c/0xb4 Fixes: 90ba37033cb9 ("spi: spi-fsl-dspi: Add DMA support for Vybrid") Signed-off-by: Krzysztof Kozlowski Acked-by: Vladimir Oltean Cc: Link: https://lore.kernel.org/r/1591803717-11218-1-git-send-email-krzk@kernel.org Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-dspi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index a35faced0456..58190c94561f 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -588,14 +588,14 @@ static void dspi_release_dma(struct fsl_dspi *dspi) return; if (dma->chan_tx) { - dma_unmap_single(dma->chan_tx->device->dev, dma->tx_dma_phys, - dma_bufsize, DMA_TO_DEVICE); + dma_free_coherent(dma->chan_tx->device->dev, dma_bufsize, + dma->tx_dma_buf, dma->tx_dma_phys); dma_release_channel(dma->chan_tx); } if (dma->chan_rx) { - dma_unmap_single(dma->chan_rx->device->dev, dma->rx_dma_phys, - dma_bufsize, DMA_FROM_DEVICE); + dma_free_coherent(dma->chan_rx->device->dev, dma_bufsize, + dma->rx_dma_buf, dma->rx_dma_phys); dma_release_channel(dma->chan_rx); } } From adb36a8203831e40494a92095dacd566b2ad4a69 Mon Sep 17 00:00:00 2001 From: Aaron Plattner Date: Thu, 11 Jun 2020 11:08:45 -0700 Subject: [PATCH 034/618] ALSA: hda: Add NVIDIA codec IDs 9a & 9d through a0 to patch table These IDs are for upcoming NVIDIA chips with audio functions that are largely similar to the existing ones. Signed-off-by: Aaron Plattner Cc: Link: https://lore.kernel.org/r/20200611180845.39942-1-aplattner@nvidia.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index fbd7cc6026d8..e2b21ef5d7d1 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -4145,6 +4145,11 @@ HDA_CODEC_ENTRY(0x10de0095, "GPU 95 HDMI/DP", patch_nvhdmi), HDA_CODEC_ENTRY(0x10de0097, "GPU 97 HDMI/DP", patch_nvhdmi), HDA_CODEC_ENTRY(0x10de0098, "GPU 98 HDMI/DP", patch_nvhdmi), HDA_CODEC_ENTRY(0x10de0099, "GPU 99 HDMI/DP", patch_nvhdmi), +HDA_CODEC_ENTRY(0x10de009a, "GPU 9a HDMI/DP", patch_nvhdmi), +HDA_CODEC_ENTRY(0x10de009d, "GPU 9d HDMI/DP", patch_nvhdmi), +HDA_CODEC_ENTRY(0x10de009e, "GPU 9e HDMI/DP", patch_nvhdmi), +HDA_CODEC_ENTRY(0x10de009f, "GPU 9f HDMI/DP", patch_nvhdmi), +HDA_CODEC_ENTRY(0x10de00a0, "GPU a0 HDMI/DP", patch_nvhdmi), HDA_CODEC_ENTRY(0x10de8001, "MCP73 HDMI", patch_nvhdmi_2ch), HDA_CODEC_ENTRY(0x10de8067, "MCP67/68 HDMI", patch_nvhdmi_2ch), HDA_CODEC_ENTRY(0x11069f80, "VX900 HDMI/DP", patch_via_hdmi), From e7585db1b0b5b4e4eb1967bb1472df308f7ffcbf Mon Sep 17 00:00:00 2001 From: Laurence Tratt Date: Fri, 12 Jun 2020 12:18:07 +0100 Subject: [PATCH 035/618] ALSA: usb-audio: Add implicit feedback quirk for SSL2+. This uses the same quirk as the Motu M2 and M4 to ensure the driver uses the audio interface's clock. Tested on an SSL2+. Signed-off-by: Laurence Tratt Cc: Link: https://lore.kernel.org/r/20200612111807.dgnig6rwhmsl2bod@overdrive.tratt.net Signed-off-by: Takashi Iwai --- sound/usb/pcm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 8a05dcb1344f..84c0ae431936 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -367,6 +367,7 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs, ifnum = 0; goto add_sync_ep_from_ifnum; case USB_ID(0x07fd, 0x0008): /* MOTU M Series */ + case USB_ID(0x31e9, 0x0002): /* Solid State Logic SSL2+ */ ep = 0x81; ifnum = 2; goto add_sync_ep_from_ifnum; From 6fbea6b6a838f9aa941fe53a3637fd8d8aab1eba Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 12 Jun 2020 15:37:48 +0800 Subject: [PATCH 036/618] ASoC: soc-card: export snd_soc_lookup_component_nolocked snd_soc_lookup_component_nolocked can be used for the DPCM case that Front-End needs to get the unused platform component but added by Back-End cpu dai driver. If the component is gotten, then we can get the dma chan created by Back-End component and reused it in Front-End. Signed-off-by: Shengjiu Wang Reviewed-by: Nicolin Chen Link: https://lore.kernel.org/r/55f6e0d76f67a517b9a44136d790ff2a06b5caa8.1591947428.git.shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- include/sound/soc.h | 2 ++ sound/soc/soc-core.c | 3 ++- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index 74868436ac79..565612a8d690 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -444,6 +444,8 @@ int devm_snd_soc_register_component(struct device *dev, const struct snd_soc_component_driver *component_driver, struct snd_soc_dai_driver *dai_drv, int num_dai); void snd_soc_unregister_component(struct device *dev); +struct snd_soc_component *snd_soc_lookup_component_nolocked(struct device *dev, + const char *driver_name); struct snd_soc_component *snd_soc_lookup_component(struct device *dev, const char *driver_name); diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 7b387202c5db..0f30f5aabaa8 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -310,7 +310,7 @@ struct snd_soc_component *snd_soc_rtdcom_lookup(struct snd_soc_pcm_runtime *rtd, } EXPORT_SYMBOL_GPL(snd_soc_rtdcom_lookup); -static struct snd_soc_component +struct snd_soc_component *snd_soc_lookup_component_nolocked(struct device *dev, const char *driver_name) { struct snd_soc_component *component; @@ -329,6 +329,7 @@ static struct snd_soc_component return found_component; } +EXPORT_SYMBOL_GPL(snd_soc_lookup_component_nolocked); struct snd_soc_component *snd_soc_lookup_component(struct device *dev, const char *driver_name) From a9a21e1eafc94b79502cab8272b392f7f63ef7bb Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 12 Jun 2020 15:37:49 +0800 Subject: [PATCH 037/618] ASoC: dmaengine_pcm: export soc_component_to_pcm In DPCM case, Front-End needs to get the dma chan which has been requested by Back-End and reuse it. Signed-off-by: Shengjiu Wang Reviewed-by: Nicolin Chen Link: https://lore.kernel.org/r/429c6ae1f3c5b47eb893f475d531d71cdcfe34c0.1591947428.git.shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- include/sound/dmaengine_pcm.h | 11 +++++++++++ sound/soc/soc-generic-dmaengine-pcm.c | 12 ------------ 2 files changed, 11 insertions(+), 12 deletions(-) diff --git a/include/sound/dmaengine_pcm.h b/include/sound/dmaengine_pcm.h index b65220685920..8c5e38180fb0 100644 --- a/include/sound/dmaengine_pcm.h +++ b/include/sound/dmaengine_pcm.h @@ -161,4 +161,15 @@ int snd_dmaengine_pcm_prepare_slave_config(struct snd_pcm_substream *substream, #define SND_DMAENGINE_PCM_DRV_NAME "snd_dmaengine_pcm" +struct dmaengine_pcm { + struct dma_chan *chan[SNDRV_PCM_STREAM_LAST + 1]; + const struct snd_dmaengine_pcm_config *config; + struct snd_soc_component component; + unsigned int flags; +}; + +static inline struct dmaengine_pcm *soc_component_to_pcm(struct snd_soc_component *p) +{ + return container_of(p, struct dmaengine_pcm, component); +} #endif diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c index f728309a0833..80a4e71f2d95 100644 --- a/sound/soc/soc-generic-dmaengine-pcm.c +++ b/sound/soc/soc-generic-dmaengine-pcm.c @@ -21,18 +21,6 @@ */ #define SND_DMAENGINE_PCM_FLAG_NO_RESIDUE BIT(31) -struct dmaengine_pcm { - struct dma_chan *chan[SNDRV_PCM_STREAM_LAST + 1]; - const struct snd_dmaengine_pcm_config *config; - struct snd_soc_component component; - unsigned int flags; -}; - -static struct dmaengine_pcm *soc_component_to_pcm(struct snd_soc_component *p) -{ - return container_of(p, struct dmaengine_pcm, component); -} - static struct device *dmaengine_dma_dev(struct dmaengine_pcm *pcm, struct snd_pcm_substream *substream) { From 706e2c8811585f42612b6cff218ab3adbe63a4ee Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 12 Jun 2020 15:37:50 +0800 Subject: [PATCH 038/618] ASoC: fsl_asrc_dma: Reuse the dma channel if available in Back-End The dma channel has been requested by Back-End cpu dai driver already. If fsl_asrc_dma requests dma chan with same dma:tx symlink, then there will be below warning with SDMA. [ 48.174236] fsl-esai-dai 2024000.esai: Cannot create DMA dma:tx symlink So if we can reuse the dma channel of Back-End, then the issue can be fixed. In order to get the dma channel which is already requested in Back-End. we use the exported two functions (snd_soc_lookup_component_nolocked and soc_component_to_pcm). If we can get the dma channel, then reuse it, if can't, then request a new one. Signed-off-by: Shengjiu Wang Reviewed-by: Nicolin Chen Link: https://lore.kernel.org/r/3a79f0442cb4930c633cf72145cfe95a45b9c78e.1591947428.git.shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_asrc_dma.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c index d6a3fc5f87e5..d88e6343e0a2 100644 --- a/sound/soc/fsl/fsl_asrc_dma.c +++ b/sound/soc/fsl/fsl_asrc_dma.c @@ -135,6 +135,8 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component, struct snd_dmaengine_dai_dma_data *dma_params_be = NULL; struct snd_pcm_runtime *runtime = substream->runtime; struct fsl_asrc_pair *pair = runtime->private_data; + struct dma_chan *tmp_chan = NULL, *be_chan = NULL; + struct snd_soc_component *component_be = NULL; struct fsl_asrc *asrc = pair->asrc; struct dma_slave_config config_fe, config_be; enum asrc_pair_index index = pair->index; @@ -142,7 +144,6 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component, int stream = substream->stream; struct imx_dma_data *tmp_data; struct snd_soc_dpcm *dpcm; - struct dma_chan *tmp_chan; struct device *dev_be; u8 dir = tx ? OUT : IN; dma_cap_mask_t mask; @@ -197,18 +198,30 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component, dma_cap_set(DMA_SLAVE, mask); dma_cap_set(DMA_CYCLIC, mask); + /* + * The Back-End device might have already requested a DMA channel, + * so try to reuse it first, and then request a new one upon NULL. + */ + component_be = snd_soc_lookup_component_nolocked(dev_be, SND_DMAENGINE_PCM_DRV_NAME); + if (component_be) { + be_chan = soc_component_to_pcm(component_be)->chan[substream->stream]; + tmp_chan = be_chan; + } + if (!tmp_chan) + tmp_chan = dma_request_slave_channel(dev_be, tx ? "tx" : "rx"); + /* * An EDMA DEV_TO_DEV channel is fixed and bound with DMA event of each * peripheral, unlike SDMA channel that is allocated dynamically. So no - * need to configure dma_request and dma_request2, but get dma_chan via - * dma_request_slave_channel directly with dma name of Front-End device + * need to configure dma_request and dma_request2, but get dma_chan of + * Back-End device directly via dma_request_slave_channel. */ if (!asrc->use_edma) { /* Get DMA request of Back-End */ - tmp_chan = dma_request_slave_channel(dev_be, tx ? "tx" : "rx"); tmp_data = tmp_chan->private; pair->dma_data.dma_request = tmp_data->dma_request; - dma_release_channel(tmp_chan); + if (!be_chan) + dma_release_channel(tmp_chan); /* Get DMA request of Front-End */ tmp_chan = asrc->get_dma_channel(pair, dir); @@ -221,6 +234,8 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component, pair->dma_chan[dir] = dma_request_channel(mask, filter, &pair->dma_data); } else { + if (!be_chan) + dma_release_channel(tmp_chan); pair->dma_chan[dir] = asrc->get_dma_channel(pair, dir); } From b287a6d9723c601dd947f1c27d4cc0192e384a5a Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 12 Jun 2020 15:37:51 +0800 Subject: [PATCH 039/618] ASoC: fsl_asrc_dma: Fix data copying speed issue with EDMA With EDMA, there is two dma channels can be used for dev_to_dev, one is from ASRC, one is from another peripheral (ESAI or SAI). If we select the dma channel of ASRC, there is an issue for ideal ratio case, the speed of copy data is faster than sample frequency, because ASRC output data is very fast in ideal ratio mode. So it is reasonable to use the dma channel of Back-End peripheral. then copying speed of DMA is controlled by data consumption speed in the peripheral FIFO, Signed-off-by: Shengjiu Wang Reviewed-by: Nicolin Chen Link: https://lore.kernel.org/r/424ed6c249bafcbe30791c9de0352821c5ea67e2.1591947428.git.shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_asrc_common.h | 2 ++ sound/soc/fsl/fsl_asrc_dma.c | 26 +++++++++++++++----------- 2 files changed, 17 insertions(+), 11 deletions(-) diff --git a/sound/soc/fsl/fsl_asrc_common.h b/sound/soc/fsl/fsl_asrc_common.h index 77665b15c8db..7e1c13ca37f1 100644 --- a/sound/soc/fsl/fsl_asrc_common.h +++ b/sound/soc/fsl/fsl_asrc_common.h @@ -32,6 +32,7 @@ enum asrc_pair_index { * @dma_chan: inputer and output DMA channels * @dma_data: private dma data * @pos: hardware pointer position + * @req_dma_chan: flag to release dev_to_dev chan * @private: pair private area */ struct fsl_asrc_pair { @@ -45,6 +46,7 @@ struct fsl_asrc_pair { struct dma_chan *dma_chan[2]; struct imx_dma_data dma_data; unsigned int pos; + bool req_dma_chan; void *private; }; diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c index d88e6343e0a2..5f01a58f422a 100644 --- a/sound/soc/fsl/fsl_asrc_dma.c +++ b/sound/soc/fsl/fsl_asrc_dma.c @@ -233,11 +233,11 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component, pair->dma_chan[dir] = dma_request_channel(mask, filter, &pair->dma_data); + pair->req_dma_chan = true; } else { - if (!be_chan) - dma_release_channel(tmp_chan); - pair->dma_chan[dir] = - asrc->get_dma_channel(pair, dir); + pair->dma_chan[dir] = tmp_chan; + /* Do not flag to release if we are reusing the Back-End one */ + pair->req_dma_chan = !be_chan; } if (!pair->dma_chan[dir]) { @@ -276,7 +276,8 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component, ret = dmaengine_slave_config(pair->dma_chan[dir], &config_be); if (ret) { dev_err(dev, "failed to config DMA channel for Back-End\n"); - dma_release_channel(pair->dma_chan[dir]); + if (pair->req_dma_chan) + dma_release_channel(pair->dma_chan[dir]); return ret; } @@ -288,19 +289,22 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component, static int fsl_asrc_dma_hw_free(struct snd_soc_component *component, struct snd_pcm_substream *substream) { + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; struct snd_pcm_runtime *runtime = substream->runtime; struct fsl_asrc_pair *pair = runtime->private_data; + u8 dir = tx ? OUT : IN; snd_pcm_set_runtime_buffer(substream, NULL); - if (pair->dma_chan[IN]) - dma_release_channel(pair->dma_chan[IN]); + if (pair->dma_chan[!dir]) + dma_release_channel(pair->dma_chan[!dir]); - if (pair->dma_chan[OUT]) - dma_release_channel(pair->dma_chan[OUT]); + /* release dev_to_dev chan if we aren't reusing the Back-End one */ + if (pair->dma_chan[dir] && pair->req_dma_chan) + dma_release_channel(pair->dma_chan[dir]); - pair->dma_chan[IN] = NULL; - pair->dma_chan[OUT] = NULL; + pair->dma_chan[!dir] = NULL; + pair->dma_chan[dir] = NULL; return 0; } From d7442ba13d62de9afc4e57344a676f9f4623dcaa Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Fri, 12 Jun 2020 12:50:33 +0200 Subject: [PATCH 040/618] regulator: da9063: fix LDO9 suspend and warning. Commit 99f75ce66619 ("regulator: da9063: fix suspend") converted the regulators to use a common (corrected) suspend bit setting but one of regulators (LDO9) slipped through the crack. This means that the original problem was not fixed for LDO9 and also leads to a warning found by the test robot. da9063-regulator.c:515:3: warning: initialized field overwritten Fix this by converting that regulator too like the others. Fixes: 99f75ce66619 ("regulator: da9063: fix suspend") Reported-by: kernel test robot Signed-off-by: Martin Fuzzey Link: https://lore.kernel.org/r/1591959073-16792-1-git-send-email-martin.fuzzey@flowbird.group Signed-off-by: Mark Brown --- drivers/regulator/da9063-regulator.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c index e1d6c8f6d40b..fe65b5acaf28 100644 --- a/drivers/regulator/da9063-regulator.c +++ b/drivers/regulator/da9063-regulator.c @@ -512,7 +512,6 @@ static const struct da9063_regulator_info da9063_regulator_info[] = { }, { DA9063_LDO(DA9063, LDO9, 950, 50, 3600), - .suspend = BFIELD(DA9063_REG_LDO9_CONT, DA9063_VLDO9_SEL), }, { DA9063_LDO(DA9063, LDO11, 900, 50, 3600), From 92919679d31721381e3c376488477efe49b915f3 Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Fri, 12 Jun 2020 12:23:17 +0300 Subject: [PATCH 041/618] regulator: Fix pickable ranges mapping Pickable ranges mapping function never used range min selector. Thus existing drivers broke when proper linear_ranges functionality was taken in use. Fix this for now just by ignoring the minimum selector. Fixes: 60ab7f4153b6 ("regulator: use linear_ranges helper") Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/20200612090225.GA3243@localhost.localdomain Signed-off-by: Mark Brown --- drivers/regulator/helpers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c index e970e9d2f8be..e4bb09bbd3fa 100644 --- a/drivers/regulator/helpers.c +++ b/drivers/regulator/helpers.c @@ -486,7 +486,7 @@ int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev, continue; } - ret = selector + sel; + ret = selector + sel - range->min_sel; voltage = rdev->desc->ops->list_voltage(rdev, ret); From de1f6d9304c38e414552c3565d36286609ced0c1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Mon, 8 Jun 2020 18:33:41 +0200 Subject: [PATCH 042/618] ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This property is needed since commit abe60a3a7afb ("ARM: dts: Kill off skeleton{64}.dtsi"). Without it booting silently hangs at: [ 0.000000] Memory policy: Data cache writealloc Fixes: 984829e2d39b ("ARM: dts: BCM5301X: Add DT for Luxul XWC-2000") Signed-off-by: RafaÅ‚ MiÅ‚ecki Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts index 334325390aed..29bbecd36f65 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts @@ -17,6 +17,7 @@ chosen { }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; }; From 0386e9ce5877ee73e07675529d5ae594d00f0900 Mon Sep 17 00:00:00 2001 From: Matthew Hagan Date: Tue, 9 Jun 2020 17:58:31 +0100 Subject: [PATCH 043/618] ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP The NSP SoC includes an SP804 timer so should be enabled here. Fixes: a0efb0d28b77 ("ARM: dts: NSP: Add SP804 Support to DT") Signed-off-by: Matthew Hagan Signed-off-by: Florian Fainelli --- arch/arm/mach-bcm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 6aa938b949db..1df0ee01ee02 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -53,6 +53,7 @@ config ARCH_BCM_NSP select ARM_ERRATA_754322 select ARM_ERRATA_775420 select ARM_ERRATA_764369 if SMP + select ARM_TIMER_SP804 select THERMAL select THERMAL_OF help From 7d4e3919592593594296944ae7da1a207706e8c5 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Wed, 10 Jun 2020 09:14:35 -0700 Subject: [PATCH 044/618] esp, ah: consolidate the crypto algorithm selections Instead of duplicating the algorithm selections between INET_AH and INET6_AH and between INET_ESP and INET6_ESP, create new tristates XFRM_AH and XFRM_ESP that do the algorithm selections, and make these be selected by the corresponding INET* options. Suggested-by: Herbert Xu Acked-by: Herbert Xu Cc: Corentin Labbe Cc: Greg Kroah-Hartman Cc: Steffen Klassert Signed-off-by: Eric Biggers Signed-off-by: Steffen Klassert --- net/ipv4/Kconfig | 16 ++-------------- net/ipv6/Kconfig | 16 ++-------------- net/xfrm/Kconfig | 20 ++++++++++++++++++++ 3 files changed, 24 insertions(+), 28 deletions(-) diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index 23ba5045e3d3..39a7a21744dc 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -340,11 +340,7 @@ config NET_FOU_IP_TUNNELS config INET_AH tristate "IP: AH transformation" - select XFRM_ALGO - select CRYPTO - select CRYPTO_HMAC - select CRYPTO_MD5 - select CRYPTO_SHA1 + select XFRM_AH ---help--- Support for IPsec AH. @@ -352,15 +348,7 @@ config INET_AH config INET_ESP tristate "IP: ESP transformation" - select XFRM_ALGO - select CRYPTO - select CRYPTO_AUTHENC - select CRYPTO_HMAC - select CRYPTO_MD5 - select CRYPTO_CBC - select CRYPTO_SHA1 - select CRYPTO_DES - select CRYPTO_ECHAINIV + select XFRM_ESP ---help--- Support for IPsec ESP. diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig index 4f03aece2980..70313f16319d 100644 --- a/net/ipv6/Kconfig +++ b/net/ipv6/Kconfig @@ -49,11 +49,7 @@ config IPV6_OPTIMISTIC_DAD config INET6_AH tristate "IPv6: AH transformation" - select XFRM_ALGO - select CRYPTO - select CRYPTO_HMAC - select CRYPTO_MD5 - select CRYPTO_SHA1 + select XFRM_AH ---help--- Support for IPsec AH. @@ -61,15 +57,7 @@ config INET6_AH config INET6_ESP tristate "IPv6: ESP transformation" - select XFRM_ALGO - select CRYPTO - select CRYPTO_AUTHENC - select CRYPTO_HMAC - select CRYPTO_MD5 - select CRYPTO_CBC - select CRYPTO_SHA1 - select CRYPTO_DES - select CRYPTO_ECHAINIV + select XFRM_ESP ---help--- Support for IPsec ESP. diff --git a/net/xfrm/Kconfig b/net/xfrm/Kconfig index b7fd9c838416..169c22140709 100644 --- a/net/xfrm/Kconfig +++ b/net/xfrm/Kconfig @@ -67,6 +67,26 @@ config XFRM_STATISTICS If unsure, say N. +config XFRM_AH + tristate + select XFRM_ALGO + select CRYPTO + select CRYPTO_HMAC + select CRYPTO_MD5 + select CRYPTO_SHA1 + +config XFRM_ESP + tristate + select XFRM_ALGO + select CRYPTO + select CRYPTO_AUTHENC + select CRYPTO_HMAC + select CRYPTO_MD5 + select CRYPTO_CBC + select CRYPTO_SHA1 + select CRYPTO_DES + select CRYPTO_ECHAINIV + config XFRM_IPCOMP tristate select XFRM_ALGO From 37ea0f18fb19e0646c166037043232915cd9e995 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Wed, 10 Jun 2020 09:14:36 -0700 Subject: [PATCH 045/618] esp: select CRYPTO_SEQIV Commit f23efcbcc523 ("crypto: ctr - no longer needs CRYPTO_SEQIV") made CRYPTO_CTR stop selecting CRYPTO_SEQIV. This breaks IPsec for most users since GCM and several other encryption algorithms require "seqiv" -- and RFC 8221 lists AES-GCM as "MUST" be implemented. Just make XFRM_ESP select CRYPTO_SEQIV. Fixes: f23efcbcc523 ("crypto: ctr - no longer needs CRYPTO_SEQIV") Acked-by: Herbert Xu Cc: Corentin Labbe Cc: Greg Kroah-Hartman Cc: Steffen Klassert Signed-off-by: Eric Biggers Signed-off-by: Steffen Klassert --- net/xfrm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/net/xfrm/Kconfig b/net/xfrm/Kconfig index 169c22140709..b2ff8df2c836 100644 --- a/net/xfrm/Kconfig +++ b/net/xfrm/Kconfig @@ -86,6 +86,7 @@ config XFRM_ESP select CRYPTO_SHA1 select CRYPTO_DES select CRYPTO_ECHAINIV + select CRYPTO_SEQIV config XFRM_IPCOMP tristate From be01369859b8aa07346e497381bb46d377da0d8c Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Wed, 10 Jun 2020 09:14:37 -0700 Subject: [PATCH 046/618] esp, ah: modernize the crypto algorithm selections The crypto algorithms selected by the ESP and AH kconfig options are out-of-date with the guidance of RFC 8221, which lists the legacy algorithms MD5 and DES as "MUST NOT" be implemented, and some more modern algorithms like AES-GCM and HMAC-SHA256 as "MUST" be implemented. But the options select the legacy algorithms, not the modern ones. Therefore, modify these options to select the MUST algorithms -- and *only* the MUST algorithms. Also improve the help text. Note that other algorithms may still be explicitly enabled in the kconfig, and the choice of which to actually use is still controlled by userspace. This change only modifies the list of algorithms for which kernel support is guaranteed to be present. Suggested-by: Herbert Xu Suggested-by: Steffen Klassert Acked-by: Herbert Xu Cc: Corentin Labbe Cc: Greg Kroah-Hartman Signed-off-by: Eric Biggers Signed-off-by: Steffen Klassert --- net/ipv4/Kconfig | 18 ++++++++++++++++-- net/ipv6/Kconfig | 18 ++++++++++++++++-- net/xfrm/Kconfig | 15 +++++++++------ 3 files changed, 41 insertions(+), 10 deletions(-) diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index 39a7a21744dc..dc9dfaef77e5 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -342,7 +342,14 @@ config INET_AH tristate "IP: AH transformation" select XFRM_AH ---help--- - Support for IPsec AH. + Support for IPsec AH (Authentication Header). + + AH can be used with various authentication algorithms. Besides + enabling AH support itself, this option enables the generic + implementations of the algorithms that RFC 8221 lists as MUST be + implemented. If you need any other algorithms, you'll need to enable + them in the crypto API. You should also enable accelerated + implementations of any needed algorithms when available. If unsure, say Y. @@ -350,7 +357,14 @@ config INET_ESP tristate "IP: ESP transformation" select XFRM_ESP ---help--- - Support for IPsec ESP. + Support for IPsec ESP (Encapsulating Security Payload). + + ESP can be used with various encryption and authentication algorithms. + Besides enabling ESP support itself, this option enables the generic + implementations of the algorithms that RFC 8221 lists as MUST be + implemented. If you need any other algorithms, you'll need to enable + them in the crypto API. You should also enable accelerated + implementations of any needed algorithms when available. If unsure, say Y. diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig index 70313f16319d..414a68b16869 100644 --- a/net/ipv6/Kconfig +++ b/net/ipv6/Kconfig @@ -51,7 +51,14 @@ config INET6_AH tristate "IPv6: AH transformation" select XFRM_AH ---help--- - Support for IPsec AH. + Support for IPsec AH (Authentication Header). + + AH can be used with various authentication algorithms. Besides + enabling AH support itself, this option enables the generic + implementations of the algorithms that RFC 8221 lists as MUST be + implemented. If you need any other algorithms, you'll need to enable + them in the crypto API. You should also enable accelerated + implementations of any needed algorithms when available. If unsure, say Y. @@ -59,7 +66,14 @@ config INET6_ESP tristate "IPv6: ESP transformation" select XFRM_ESP ---help--- - Support for IPsec ESP. + Support for IPsec ESP (Encapsulating Security Payload). + + ESP can be used with various encryption and authentication algorithms. + Besides enabling ESP support itself, this option enables the generic + implementations of the algorithms that RFC 8221 lists as MUST be + implemented. If you need any other algorithms, you'll need to enable + them in the crypto API. You should also enable accelerated + implementations of any needed algorithms when available. If unsure, say Y. diff --git a/net/xfrm/Kconfig b/net/xfrm/Kconfig index b2ff8df2c836..e77ba529229c 100644 --- a/net/xfrm/Kconfig +++ b/net/xfrm/Kconfig @@ -67,26 +67,29 @@ config XFRM_STATISTICS If unsure, say N. +# This option selects XFRM_ALGO along with the AH authentication algorithms that +# RFC 8221 lists as MUST be implemented. config XFRM_AH tristate select XFRM_ALGO select CRYPTO select CRYPTO_HMAC - select CRYPTO_MD5 - select CRYPTO_SHA1 + select CRYPTO_SHA256 +# This option selects XFRM_ALGO along with the ESP encryption and authentication +# algorithms that RFC 8221 lists as MUST be implemented. config XFRM_ESP tristate select XFRM_ALGO select CRYPTO + select CRYPTO_AES select CRYPTO_AUTHENC - select CRYPTO_HMAC - select CRYPTO_MD5 select CRYPTO_CBC - select CRYPTO_SHA1 - select CRYPTO_DES select CRYPTO_ECHAINIV + select CRYPTO_GCM + select CRYPTO_HMAC select CRYPTO_SEQIV + select CRYPTO_SHA256 config XFRM_IPCOMP tristate From c9808bbfed3cfc911ecb60fe8e80c0c27876c657 Mon Sep 17 00:00:00 2001 From: "Yick W. Tse" Date: Sat, 13 Jun 2020 11:40:06 +0000 Subject: [PATCH 047/618] ALSA: usb-audio: add quirk for Denon DCD-1500RE fix error "clock source 41 is not valid, cannot use" [] New USB device found, idVendor=154e, idProduct=1002, bcdDevice= 1.00 [] New USB device strings: Mfr=1, Product=2, SerialNumber=0 [] Product: DCD-1500RE [] Manufacturer: D & M Holdings Inc. [] [] clock source 41 is not valid, cannot use [] usbcore: registered new interface driver snd-usb-audio Signed-off-by: Yick W. Tse Cc: Link: https://lore.kernel.org/r/1373857985.210365.1592048406997@mail.yahoo.com Signed-off-by: Takashi Iwai --- sound/usb/quirks.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index bca0179a0ef8..c495e720e2f1 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1532,6 +1532,7 @@ bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip) static bool is_itf_usb_dsd_dac(unsigned int id) { switch (id) { + case USB_ID(0x154e, 0x1002): /* Denon DCD-1500RE */ case USB_ID(0x154e, 0x1003): /* Denon DA-300USB */ case USB_ID(0x154e, 0x3005): /* Marantz HD-DAC1 */ case USB_ID(0x154e, 0x3006): /* Marantz SA-14S1 */ From 8abf41dcd1bcdda0d09905fb59d18f45c035c752 Mon Sep 17 00:00:00 2001 From: Christopher Swenson Date: Sun, 14 Jun 2020 17:11:47 -0700 Subject: [PATCH 048/618] ALSA: usb-audio: Set 48 kHz rate for Rodecaster Like the Line6 devices, the Rode Rodecaster Pro does not support UAC2_CS_RANGE and only supports a sample rate of 48 kHz. Tested against a Rode Rodecaster Pro. Tested-by: Christopher Swenson Signed-off-by: Christopher Swenson Cc: Link: https://lore.kernel.org/r/ebdb9e72-9649-0b5e-b9b9-d757dbf26927@swenson.io Signed-off-by: Takashi Iwai --- sound/usb/format.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/usb/format.c b/sound/usb/format.c index 5ffb457cc88c..1b28d01d1f4c 100644 --- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -394,8 +394,9 @@ static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip, return nr_rates; } -/* Line6 Helix series don't support the UAC2_CS_RANGE usb function - * call. Return a static table of known clock rates. +/* Line6 Helix series and the Rode Rodecaster Pro don't support the + * UAC2_CS_RANGE usb function call. Return a static table of known + * clock rates. */ static int line6_parse_audio_format_rates_quirk(struct snd_usb_audio *chip, struct audioformat *fp) @@ -408,6 +409,7 @@ static int line6_parse_audio_format_rates_quirk(struct snd_usb_audio *chip, case USB_ID(0x0e41, 0x4248): /* Line6 Helix >= fw 2.82 */ case USB_ID(0x0e41, 0x4249): /* Line6 Helix Rack >= fw 2.82 */ case USB_ID(0x0e41, 0x424a): /* Line6 Helix LT >= fw 2.82 */ + case USB_ID(0x19f7, 0x0011): /* Rode Rodecaster Pro */ return set_fixed_rate(fp, 48000, SNDRV_PCM_RATE_48000); } From 2c18bd525c47f882f033b0a813ecd09c93e1ecdf Mon Sep 17 00:00:00 2001 From: Babu Moger Date: Thu, 4 Jun 2020 14:45:16 -0500 Subject: [PATCH 049/618] x86/resctrl: Fix memory bandwidth counter width for AMD MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Memory bandwidth is calculated reading the monitoring counter at two intervals and calculating the delta. It is the software’s responsibility to read the count often enough to avoid having the count roll over _twice_ between reads. The current code hardcodes the bandwidth monitoring counter's width to 24 bits for AMD. This is due to default base counter width which is 24. Currently, AMD does not implement the CPUID 0xF.[ECX=1]:EAX to adjust the counter width. But, the AMD hardware supports much wider bandwidth counter with the default width of 44 bits. Kernel reads these monitoring counters every 1 second and adjusts the counter value for overflow. With 24 bits and scale value of 64 for AMD, it can only measure up to 1GB/s without overflowing. For the rates above 1GB/s this will fail to measure the bandwidth. Fix the issue setting the default width to 44 bits by adjusting the offset. AMD future products will implement CPUID 0xF.[ECX=1]:EAX. [ bp: Let the line stick out and drop {}-brackets around a single statement. ] Fixes: 4d05bf71f157 ("x86/resctrl: Introduce AMD QOS feature") Signed-off-by: Babu Moger Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/159129975546.62538.5656031125604254041.stgit@naples-babu.amd.com --- arch/x86/kernel/cpu/resctrl/core.c | 8 ++++---- arch/x86/kernel/cpu/resctrl/internal.h | 1 + 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c index 12f967c6b603..6a9df71c1b9e 100644 --- a/arch/x86/kernel/cpu/resctrl/core.c +++ b/arch/x86/kernel/cpu/resctrl/core.c @@ -981,10 +981,10 @@ void resctrl_cpu_detect(struct cpuinfo_x86 *c) c->x86_cache_max_rmid = ecx; c->x86_cache_occ_scale = ebx; - if (c->x86_vendor == X86_VENDOR_INTEL) - c->x86_cache_mbm_width_offset = eax & 0xff; - else - c->x86_cache_mbm_width_offset = -1; + c->x86_cache_mbm_width_offset = eax & 0xff; + + if (c->x86_vendor == X86_VENDOR_AMD && !c->x86_cache_mbm_width_offset) + c->x86_cache_mbm_width_offset = MBM_CNTR_WIDTH_OFFSET_AMD; } } diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h index f20a47d120b1..5ffa32256b3b 100644 --- a/arch/x86/kernel/cpu/resctrl/internal.h +++ b/arch/x86/kernel/cpu/resctrl/internal.h @@ -37,6 +37,7 @@ #define MBA_IS_LINEAR 0x4 #define MBA_MAX_MBPS U32_MAX #define MAX_MBA_BW_AMD 0x800 +#define MBM_CNTR_WIDTH_OFFSET_AMD 20 #define RMID_VAL_ERROR BIT_ULL(63) #define RMID_VAL_UNAVAIL BIT_ULL(62) From 37cc4b95d13f311c04aa8e9daacca3905ad45ca7 Mon Sep 17 00:00:00 2001 From: Xiyu Yang Date: Sat, 13 Jun 2020 20:28:38 +0800 Subject: [PATCH 050/618] drm/ttm: Fix dma_fence refcnt leak in ttm_bo_vm_fault_reserved MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ttm_bo_vm_fault_reserved() invokes dma_fence_get(), which returns a reference of the specified dma_fence object to "moving" with increased refcnt. When ttm_bo_vm_fault_reserved() returns, local variable "moving" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in several exception handling paths of ttm_bo_vm_fault_reserved(). When those error scenarios occur such as "err" equals to -EBUSY, the function forgets to decrease the refcnt increased by dma_fence_get(), causing a refcnt leak. Fix this issue by calling dma_fence_put() when no_wait_gpu flag is equals to true. Signed-off-by: Xiyu Yang Signed-off-by: Xin Tan Reviewed-by: Christian König Link: https://patchwork.freedesktop.org/patch/370219/ Signed-off-by: Christian König --- drivers/gpu/drm/ttm/ttm_bo_vm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c index 0ad30b112982..72100b84c7a9 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_vm.c +++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c @@ -300,8 +300,10 @@ vm_fault_t ttm_bo_vm_fault_reserved(struct vm_fault *vmf, break; case -EBUSY: case -ERESTARTSYS: + dma_fence_put(moving); return VM_FAULT_NOPAGE; default: + dma_fence_put(moving); return VM_FAULT_SIGBUS; } From 11425c4519e2c974a100fc984867046d905b9380 Mon Sep 17 00:00:00 2001 From: Xiyu Yang Date: Sat, 13 Jun 2020 20:30:25 +0800 Subject: [PATCH 051/618] drm/ttm: Fix dma_fence refcnt leak when adding move fence MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ttm_bo_add_move_fence() invokes dma_fence_get(), which returns a reference of the specified dma_fence object to "fence" with increased refcnt. When ttm_bo_add_move_fence() returns, local variable "fence" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of ttm_bo_add_move_fence(). When no_wait_gpu flag is equals to true, the function forgets to decrease the refcnt increased by dma_fence_get(), causing a refcnt leak. Fix this issue by calling dma_fence_put() when no_wait_gpu flag is equals to true. Signed-off-by: Xiyu Yang Signed-off-by: Xin Tan Reviewed-by: Christian König Link: https://patchwork.freedesktop.org/patch/370221/ Signed-off-by: Christian König --- drivers/gpu/drm/ttm/ttm_bo.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 9e07c3f75156..ef5bc00c73e2 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -881,8 +881,10 @@ static int ttm_bo_add_move_fence(struct ttm_buffer_object *bo, if (!fence) return 0; - if (no_wait_gpu) + if (no_wait_gpu) { + dma_fence_put(fence); return -EBUSY; + } dma_resv_add_shared_fence(bo->base.resv, fence); From 8e742aa79780b13cd300a42198c1a4cea9c89905 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 10 Jun 2020 13:48:51 +0200 Subject: [PATCH 052/618] syscalls: Fix offset type of ksys_ftruncate() After the commit below, truncate() on x86 32bit uses ksys_ftruncate(). But ksys_ftruncate() truncates the offset to unsigned long. Switch the type of offset to loff_t which is what do_sys_ftruncate() expects. Fixes: 121b32a58a3a (x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments) Signed-off-by: Jiri Slaby Signed-off-by: Thomas Gleixner Reviewed-by: Brian Gerst Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200610114851.28549-1-jslaby@suse.cz --- include/linux/syscalls.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 7c354c2955f5..b951a87da987 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -1360,7 +1360,7 @@ static inline long ksys_lchown(const char __user *filename, uid_t user, extern long do_sys_ftruncate(unsigned int fd, loff_t length, int small); -static inline long ksys_ftruncate(unsigned int fd, unsigned long length) +static inline long ksys_ftruncate(unsigned int fd, loff_t length) { return do_sys_ftruncate(fd, length, 1); } From 0ae705f3d2b22d9d762f67fd49aa6c290987c6a3 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Mon, 15 Jun 2020 14:56:55 +0800 Subject: [PATCH 053/618] KVM: MIPS: Fix a build error for !CPU_LOONGSON64 During the KVM merging progress, a CONFIG_CPU_LOONGSON64 guard in commit 7f2a83f1c2a941ebfee53 ("KVM: MIPS: Add CPUCFG emulation for Loongson-3") is missing by accident. So add it to avoid building error. Fixes: 7f2a83f1c2a941ebfee53 ("KVM: MIPS: Add CPUCFG emulation for Loongson-3") Reported-by: kernel test robot Signed-off-by: Huacai Chen Message-Id: <1592204215-28704-1-git-send-email-chenhc@lemote.com> Signed-off-by: Paolo Bonzini --- arch/mips/kvm/mips.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c index 521bd5891e84..666d3350b4ac 100644 --- a/arch/mips/kvm/mips.c +++ b/arch/mips/kvm/mips.c @@ -67,7 +67,9 @@ struct kvm_stats_debugfs_item debugfs_entries[] = { VCPU_STAT("vz_ghfc", vz_ghfc_exits), VCPU_STAT("vz_gpa", vz_gpa_exits), VCPU_STAT("vz_resvd", vz_resvd_exits), +#ifdef CONFIG_CPU_LOONGSON64 VCPU_STAT("vz_cpucfg", vz_cpucfg_exits), +#endif #endif VCPU_STAT("halt_successful_poll", halt_successful_poll), VCPU_STAT("halt_attempted_poll", halt_attempted_poll), From 5435f73d5c4a1b7504356876e69ba52de83f4975 Mon Sep 17 00:00:00 2001 From: Arvind Sankar Date: Fri, 5 Jun 2020 11:06:38 -0400 Subject: [PATCH 054/618] efi/x86: Fix build with gcc 4 Commit bbf8e8b0fe04 ("efi/libstub: Optimize for size instead of speed") changed the optimization level for the EFI stub to -Os from -O2. Andrey Ignatov reports that this breaks the build with gcc 4.8.5. Testing on godbolt.org, the combination of -Os, -fno-asynchronous-unwind-tables, and ms_abi functions doesn't work, failing with the error: sorry, unimplemented: ms_abi attribute requires -maccumulate-outgoing-args or subtarget optimization implying it This does appear to work with gcc 4.9 onwards. Add -maccumulate-outgoing-args explicitly to unbreak the build with pre-4.9 versions of gcc. Reported-by: Andrey Ignatov Signed-off-by: Arvind Sankar Link: https://lore.kernel.org/r/20200605150638.1011637-1-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/libstub/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile index 75daaf20374e..4cce372edaf4 100644 --- a/drivers/firmware/efi/libstub/Makefile +++ b/drivers/firmware/efi/libstub/Makefile @@ -6,7 +6,8 @@ # enabled, even if doing so doesn't break the build. # cflags-$(CONFIG_X86_32) := -march=i386 -cflags-$(CONFIG_X86_64) := -mcmodel=small +cflags-$(CONFIG_X86_64) := -mcmodel=small \ + $(call cc-option,-maccumulate-outgoing-args) cflags-$(CONFIG_X86) += -m$(BITS) -D__KERNEL__ \ -fPIC -fno-strict-aliasing -mno-red-zone \ -mno-mmx -mno-sse -fshort-wchar \ From e82587336695f14283987c9aa0bfd775b520856d Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 2 Jun 2020 14:24:47 +0200 Subject: [PATCH 055/618] x86, kcsan: Remove __no_kcsan_or_inline usage Now that KCSAN relies on -tsan-distinguish-volatile we no longer need the annotation for constant_test_bit(). Remove it. Signed-off-by: Peter Zijlstra (Intel) --- arch/x86/include/asm/bitops.h | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h index 35460fef39b8..0367efdc5b7a 100644 --- a/arch/x86/include/asm/bitops.h +++ b/arch/x86/include/asm/bitops.h @@ -201,12 +201,8 @@ arch_test_and_change_bit(long nr, volatile unsigned long *addr) return GEN_BINARY_RMWcc(LOCK_PREFIX __ASM_SIZE(btc), *addr, c, "Ir", nr); } -static __no_kcsan_or_inline bool constant_test_bit(long nr, const volatile unsigned long *addr) +static __always_inline bool constant_test_bit(long nr, const volatile unsigned long *addr) { - /* - * Because this is a plain access, we need to disable KCSAN here to - * avoid double instrumentation via instrumented bitops. - */ return ((1UL << (nr & (BITS_PER_LONG-1))) & (addr[nr >> _BITOPS_LONG_SHIFT])) != 0; } From e79302ae8c8cceb51cf642d5ace9da02668cb7b4 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 2 Jun 2020 17:04:03 +0200 Subject: [PATCH 056/618] kcsan: Remove __no_kcsan_or_inline There are no more user of this function attribute, also, with us now actively supporting '__no_kcsan inline' it doesn't make sense to have in any case. Signed-off-by: Peter Zijlstra (Intel) --- Documentation/dev-tools/kcsan.rst | 6 ------ include/linux/compiler_types.h | 5 +---- 2 files changed, 1 insertion(+), 10 deletions(-) diff --git a/Documentation/dev-tools/kcsan.rst b/Documentation/dev-tools/kcsan.rst index ce4bbd918648..b38379f06194 100644 --- a/Documentation/dev-tools/kcsan.rst +++ b/Documentation/dev-tools/kcsan.rst @@ -114,12 +114,6 @@ the below options are available: To dynamically limit for which functions to generate reports, see the `DebugFS interface`_ blacklist/whitelist feature. - For ``__always_inline`` functions, replace ``__always_inline`` with - ``__no_kcsan_or_inline`` (which implies ``__always_inline``):: - - static __no_kcsan_or_inline void foo(void) { - ... - * To disable data race detection for a particular compilation unit, add to the ``Makefile``:: diff --git a/include/linux/compiler_types.h b/include/linux/compiler_types.h index 21aed0981edf..938249809511 100644 --- a/include/linux/compiler_types.h +++ b/include/linux/compiler_types.h @@ -193,10 +193,7 @@ struct ftrace_likely_data { #define __no_kcsan __no_sanitize_thread #ifdef __SANITIZE_THREAD__ -# define __no_kcsan_or_inline __no_kcsan notrace __maybe_unused -# define __no_sanitize_or_inline __no_kcsan_or_inline -#else -# define __no_kcsan_or_inline __always_inline +# define __no_sanitize_or_inline __no_kcsan notrace __maybe_unused #endif #ifndef __no_sanitize_or_inline From 5ddbc4082e1072eeeae52ff561a88620a05be08f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 2 Jun 2020 18:47:11 +0200 Subject: [PATCH 057/618] x86, kcsan: Add __no_kcsan to noinstr The 'noinstr' function attribute means no-instrumentation, this should very much include *SAN. Because lots of that is broken at present, only include KCSAN for now, as that is limited to clang11, which has sane function attribute behaviour. Signed-off-by: Peter Zijlstra (Intel) --- include/linux/compiler_types.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/linux/compiler_types.h b/include/linux/compiler_types.h index 938249809511..a8b4266084a1 100644 --- a/include/linux/compiler_types.h +++ b/include/linux/compiler_types.h @@ -118,10 +118,6 @@ struct ftrace_likely_data { #define notrace __attribute__((__no_instrument_function__)) #endif -/* Section for code which can't be instrumented at all */ -#define noinstr \ - noinline notrace __attribute((__section__(".noinstr.text"))) - /* * it doesn't make sense on ARM (currently the only user of __naked) * to trace naked functions because then mcount is called without @@ -200,6 +196,10 @@ struct ftrace_likely_data { #define __no_sanitize_or_inline __always_inline #endif +/* Section for code which can't be instrumented at all */ +#define noinstr \ + noinline notrace __attribute((__section__(".noinstr.text"))) __no_kcsan + #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ From 7b861a53e46b6b42ab8560b105af308cb72d7285 Mon Sep 17 00:00:00 2001 From: Marco Elver Date: Thu, 4 Jun 2020 07:58:10 +0200 Subject: [PATCH 058/618] kasan: Bump required compiler version Adds config variable CC_HAS_WORKING_NOSANITIZE_ADDRESS, which will be true if we have a compiler that does not fail builds due to no_sanitize_address functions. This does not yet mean they work as intended, but for automated build-tests, this is the minimum requirement. For example, we require that __always_inline functions used from no_sanitize_address functions do not generate instrumentation. On GCC <= 7 this fails to build entirely, therefore we make the minimum version GCC 8. Suggested-by: Peter Zijlstra Signed-off-by: Marco Elver Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Nick Desaulniers Acked-by: Andrey Konovalov Link: https://lkml.kernel.org/r/20200602175859.GC2604@hirez.programming.kicks-ass.net --- lib/Kconfig.kasan | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/lib/Kconfig.kasan b/lib/Kconfig.kasan index 81f5464ea9e1..af0dd09f91e9 100644 --- a/lib/Kconfig.kasan +++ b/lib/Kconfig.kasan @@ -15,11 +15,15 @@ config CC_HAS_KASAN_GENERIC config CC_HAS_KASAN_SW_TAGS def_bool $(cc-option, -fsanitize=kernel-hwaddress) +config CC_HAS_WORKING_NOSANITIZE_ADDRESS + def_bool !CC_IS_GCC || GCC_VERSION >= 80000 + config KASAN bool "KASAN: runtime memory debugger" depends on (HAVE_ARCH_KASAN && CC_HAS_KASAN_GENERIC) || \ (HAVE_ARCH_KASAN_SW_TAGS && CC_HAS_KASAN_SW_TAGS) depends on (SLUB && SYSFS) || (SLAB && !DEBUG_SLAB) + depends on CC_HAS_WORKING_NOSANITIZE_ADDRESS help Enables KASAN (KernelAddressSANitizer) - runtime memory debugger, designed to find out-of-bounds accesses and use-after-free bugs. From 5144f8a8dfd7b3681f0a2b5bf599a210b2315018 Mon Sep 17 00:00:00 2001 From: Marco Elver Date: Thu, 4 Jun 2020 07:58:11 +0200 Subject: [PATCH 059/618] compiler_types.h: Add __no_sanitize_{address,undefined} to noinstr Adds the portable definitions for __no_sanitize_address, and __no_sanitize_undefined, and subsequently changes noinstr to use the attributes to disable instrumentation via KASAN or UBSAN. Reported-by: syzbot+dc1fa714cb070b184db5@syzkaller.appspotmail.com Signed-off-by: Marco Elver Signed-off-by: Peter Zijlstra (Intel) Acked-by: Miguel Ojeda Link: https://lore.kernel.org/lkml/000000000000d2474c05a6c938fe@google.com/ --- include/linux/compiler-clang.h | 8 ++++++++ include/linux/compiler-gcc.h | 6 ++++++ include/linux/compiler_types.h | 3 ++- 3 files changed, 16 insertions(+), 1 deletion(-) diff --git a/include/linux/compiler-clang.h b/include/linux/compiler-clang.h index ee37256ec8bd..5e55302e3bf6 100644 --- a/include/linux/compiler-clang.h +++ b/include/linux/compiler-clang.h @@ -33,6 +33,14 @@ #define __no_sanitize_thread #endif +#if __has_feature(undefined_behavior_sanitizer) +/* GCC does not have __SANITIZE_UNDEFINED__ */ +#define __no_sanitize_undefined \ + __attribute__((no_sanitize("undefined"))) +#else +#define __no_sanitize_undefined +#endif + /* * Not all versions of clang implement the the type-generic versions * of the builtin overflow checkers. Fortunately, clang implements diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index 7dd4e0349ef3..1c74464c80c6 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -150,6 +150,12 @@ #define __no_sanitize_thread #endif +#if __has_attribute(__no_sanitize_undefined__) +#define __no_sanitize_undefined __attribute__((no_sanitize_undefined)) +#else +#define __no_sanitize_undefined +#endif + #if GCC_VERSION >= 50100 #define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1 #endif diff --git a/include/linux/compiler_types.h b/include/linux/compiler_types.h index a8b4266084a1..85b8d2370c24 100644 --- a/include/linux/compiler_types.h +++ b/include/linux/compiler_types.h @@ -198,7 +198,8 @@ struct ftrace_likely_data { /* Section for code which can't be instrumented at all */ #define noinstr \ - noinline notrace __attribute((__section__(".noinstr.text"))) __no_kcsan + noinline notrace __attribute((__section__(".noinstr.text"))) \ + __no_kcsan __no_sanitize_address __no_sanitize_undefined #endif /* __KERNEL__ */ From 14d3b376b6c3f66d62559d457d32edf565472163 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 3 Jun 2020 13:32:48 +0200 Subject: [PATCH 060/618] x86/entry, cpumask: Provide non-instrumented variant of cpu_is_offline() vmlinux.o: warning: objtool: exc_nmi()+0x12: call to cpumask_test_cpu.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: mce_check_crashing_cpu()+0x12: call to cpumask_test_cpu.constprop.0()leaves .noinstr.text section cpumask_test_cpu() test_bit() instrument_atomic_read() arch_test_bit() Signed-off-by: Peter Zijlstra (Intel) --- arch/x86/include/asm/cpumask.h | 18 ++++++++++++++++++ arch/x86/kernel/cpu/mce/core.c | 2 +- arch/x86/kernel/nmi.c | 2 +- 3 files changed, 20 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/cpumask.h b/arch/x86/include/asm/cpumask.h index 6722ffcef2e6..3afa990d756b 100644 --- a/arch/x86/include/asm/cpumask.h +++ b/arch/x86/include/asm/cpumask.h @@ -11,5 +11,23 @@ extern cpumask_var_t cpu_sibling_setup_mask; extern void setup_cpu_local_masks(void); +/* + * NMI and MCE exceptions need cpu_is_offline() _really_ early, + * provide an arch_ special for them to avoid instrumentation. + */ +#if NR_CPUS > 1 +static __always_inline bool arch_cpu_online(int cpu) +{ + return arch_test_bit(cpu, cpumask_bits(cpu_online_mask)); +} +#else +static __always_inline bool arch_cpu_online(int cpu) +{ + return cpu == 0; +} +#endif + +#define arch_cpu_is_offline(cpu) unlikely(!arch_cpu_online(cpu)) + #endif /* __ASSEMBLY__ */ #endif /* _ASM_X86_CPUMASK_H */ diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c index ce9120c4f740..fbe89a92ff36 100644 --- a/arch/x86/kernel/cpu/mce/core.c +++ b/arch/x86/kernel/cpu/mce/core.c @@ -1083,7 +1083,7 @@ static noinstr bool mce_check_crashing_cpu(void) { unsigned int cpu = smp_processor_id(); - if (cpu_is_offline(cpu) || + if (arch_cpu_is_offline(cpu) || (crashing_cpu != -1 && crashing_cpu != cpu)) { u64 mcgstatus; diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index 2de365f15684..d7c5e44b26f7 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -478,7 +478,7 @@ static DEFINE_PER_CPU(unsigned long, nmi_dr7); DEFINE_IDTENTRY_RAW(exc_nmi) { - if (IS_ENABLED(CONFIG_SMP) && cpu_is_offline(smp_processor_id())) + if (IS_ENABLED(CONFIG_SMP) && arch_cpu_is_offline(smp_processor_id())) return; if (this_cpu_read(nmi_state) != NMI_NOT_RUNNING) { From 6b643a07a7e41f9e11cfbb9bba4c5c9791ac2997 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 3 Jun 2020 20:09:06 +0200 Subject: [PATCH 061/618] x86/entry, ubsan, objtool: Whitelist __ubsan_handle_*() The UBSAN instrumentation only inserts external CALLs when things go 'BAD', much like WARN(). So treat them similar to WARN()s for noinstr, that is: allow them, at the risk of taking the machine down, to get their message out. Suggested-by: Marco Elver Signed-off-by: Peter Zijlstra (Intel) Acked-by: Marco Elver --- include/linux/compiler_types.h | 2 +- tools/objtool/check.c | 28 +++++++++++++++++++++++++++- 2 files changed, 28 insertions(+), 2 deletions(-) diff --git a/include/linux/compiler_types.h b/include/linux/compiler_types.h index 85b8d2370c24..14513e88b7e0 100644 --- a/include/linux/compiler_types.h +++ b/include/linux/compiler_types.h @@ -199,7 +199,7 @@ struct ftrace_likely_data { /* Section for code which can't be instrumented at all */ #define noinstr \ noinline notrace __attribute((__section__(".noinstr.text"))) \ - __no_kcsan __no_sanitize_address __no_sanitize_undefined + __no_kcsan __no_sanitize_address #endif /* __KERNEL__ */ diff --git a/tools/objtool/check.c b/tools/objtool/check.c index 5fbb90a80d23..3e214f879ada 100644 --- a/tools/objtool/check.c +++ b/tools/objtool/check.c @@ -2190,10 +2190,36 @@ static inline const char *call_dest_name(struct instruction *insn) return "{dynamic}"; } +static inline bool noinstr_call_dest(struct symbol *func) +{ + /* + * We can't deal with indirect function calls at present; + * assume they're instrumented. + */ + if (!func) + return false; + + /* + * If the symbol is from a noinstr section; we good. + */ + if (func->sec->noinstr) + return true; + + /* + * The __ubsan_handle_*() calls are like WARN(), they only happen when + * something 'BAD' happened. At the risk of taking the machine down, + * let them proceed to get the message out. + */ + if (!strncmp(func->name, "__ubsan_handle_", 15)) + return true; + + return false; +} + static int validate_call(struct instruction *insn, struct insn_state *state) { if (state->noinstr && state->instr <= 0 && - (!insn->call_dest || !insn->call_dest->sec->noinstr)) { + !noinstr_call_dest(insn->call_dest)) { WARN_FUNC("call to %s() leaves .noinstr.text section", insn->sec, insn->offset, call_dest_name(insn)); return 1; From 8e8bb06d199a5aa7a534aa3b3fc0abbbc11ca438 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 4 Jun 2020 11:17:40 +0200 Subject: [PATCH 062/618] x86/entry, bug: Comment the instrumentation_begin() usage for WARN() Explain the rationale for annotating WARN(), even though, strictly speaking printk() and friends are very much not safe in many of the places we put them. Signed-off-by: Peter Zijlstra (Intel) --- arch/x86/include/asm/bug.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/x86/include/asm/bug.h b/arch/x86/include/asm/bug.h index fb34ff641e0a..028189575560 100644 --- a/arch/x86/include/asm/bug.h +++ b/arch/x86/include/asm/bug.h @@ -75,6 +75,12 @@ do { \ unreachable(); \ } while (0) +/* + * This instrumentation_begin() is strictly speaking incorrect; but it + * suppresses the complaints from WARN()s in noinstr code. If such a WARN() + * were to trigger, we'd rather wreck the machine in an attempt to get the + * message out than not know about it. + */ #define __WARN_FLAGS(flags) \ do { \ instrumentation_begin(); \ From 5d5103595e9e53048bb7e70ee2673c897ab38300 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Mon, 8 Jun 2020 10:41:34 -0700 Subject: [PATCH 063/618] x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup Reinitialize IA32_FEAT_CTL on the BSP during wakeup to handle the case where firmware doesn't initialize or save/restore across S3. This fixes a bug where IA32_FEAT_CTL is left uninitialized and results in VMXON taking a #GP due to VMX not being fully enabled, i.e. breaks KVM. Use init_ia32_feat_ctl() to "restore" IA32_FEAT_CTL as it already deals with the case where the MSR is locked, and because APs already redo init_ia32_feat_ctl() during suspend by virtue of the SMP boot flow being used to reinitialize APs upon wakeup. Do the call in the early wakeup flow to avoid dependencies in the syscore_ops chain, e.g. simply adding a resume hook is not guaranteed to work, as KVM does VMXON in its own resume hook, kvm_resume(), when KVM has active guests. Fixes: 21bd3467a58e ("KVM: VMX: Drop initialization of IA32_FEAT_CTL MSR") Reported-by: Brad Campbell Signed-off-by: Sean Christopherson Signed-off-by: Borislav Petkov Reviewed-by: Liam Merwick Reviewed-by: Maxim Levitsky Tested-by: Brad Campbell Cc: stable@vger.kernel.org # v5.6 Link: https://lkml.kernel.org/r/20200608174134.11157-1-sean.j.christopherson@intel.com --- arch/x86/include/asm/cpu.h | 5 +++++ arch/x86/kernel/cpu/centaur.c | 1 + arch/x86/kernel/cpu/cpu.h | 4 ---- arch/x86/kernel/cpu/zhaoxin.c | 1 + arch/x86/power/cpu.c | 6 ++++++ 5 files changed, 13 insertions(+), 4 deletions(-) diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h index dd17c2da1af5..da78ccbd493b 100644 --- a/arch/x86/include/asm/cpu.h +++ b/arch/x86/include/asm/cpu.h @@ -58,4 +58,9 @@ static inline bool handle_guest_split_lock(unsigned long ip) return false; } #endif +#ifdef CONFIG_IA32_FEAT_CTL +void init_ia32_feat_ctl(struct cpuinfo_x86 *c); +#else +static inline void init_ia32_feat_ctl(struct cpuinfo_x86 *c) {} +#endif #endif /* _ASM_X86_CPU_H */ diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c index 426792565d86..c5cf336e5077 100644 --- a/arch/x86/kernel/cpu/centaur.c +++ b/arch/x86/kernel/cpu/centaur.c @@ -3,6 +3,7 @@ #include #include +#include #include #include #include diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h index fb538fccd24c..9d033693519a 100644 --- a/arch/x86/kernel/cpu/cpu.h +++ b/arch/x86/kernel/cpu/cpu.h @@ -81,8 +81,4 @@ extern void update_srbds_msr(void); extern u64 x86_read_arch_cap_msr(void); -#ifdef CONFIG_IA32_FEAT_CTL -void init_ia32_feat_ctl(struct cpuinfo_x86 *c); -#endif - #endif /* ARCH_X86_CPU_H */ diff --git a/arch/x86/kernel/cpu/zhaoxin.c b/arch/x86/kernel/cpu/zhaoxin.c index df1358ba622b..05fa4ef63490 100644 --- a/arch/x86/kernel/cpu/zhaoxin.c +++ b/arch/x86/kernel/cpu/zhaoxin.c @@ -2,6 +2,7 @@ #include #include +#include #include #include "cpu.h" diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c index 7c65102debaf..db1378c6ff26 100644 --- a/arch/x86/power/cpu.c +++ b/arch/x86/power/cpu.c @@ -193,6 +193,8 @@ static void fix_processor_context(void) */ static void notrace __restore_processor_state(struct saved_context *ctxt) { + struct cpuinfo_x86 *c; + if (ctxt->misc_enable_saved) wrmsrl(MSR_IA32_MISC_ENABLE, ctxt->misc_enable); /* @@ -263,6 +265,10 @@ static void notrace __restore_processor_state(struct saved_context *ctxt) mtrr_bp_restore(); perf_restore_debug_store(); msr_restore_context(ctxt); + + c = &cpu_data(smp_processor_id()); + if (cpu_has(c, X86_FEATURE_MSR_IA32_FEAT_CTL)) + init_ia32_feat_ctl(c); } /* Needed by apm.c */ From 7dfc06a0f25b593a9f51992f540c0f80a57f3629 Mon Sep 17 00:00:00 2001 From: Fabian Vogt Date: Mon, 15 Jun 2020 09:16:36 +0200 Subject: [PATCH 064/618] efi/tpm: Verify event log header before parsing It is possible that the first event in the event log is not actually a log header at all, but rather a normal event. This leads to the cast in __calc_tpm2_event_size being an invalid conversion, which means that the values read are effectively garbage. Depending on the first event's contents, this leads either to apparently normal behaviour, a crash or a freeze. While this behaviour of the firmware is not in accordance with the TCG Client EFI Specification, this happens on a Dell Precision 5510 with the TPM enabled but hidden from the OS ("TPM On" disabled, state otherwise untouched). The EFI firmware claims that the TPM is present and active and that it supports the TCG 2.0 event log format. Fortunately, this can be worked around by simply checking the header of the first event and the event log header signature itself. Commit b4f1874c6216 ("tpm: check event log version before reading final events") addressed a similar issue also found on Dell models. Fixes: 6b0326190205 ("efi: Attempt to get the TCG2 event log in the boot stub") Signed-off-by: Fabian Vogt Link: https://lore.kernel.org/r/1927248.evlx2EsYKh@linux-e202.suse.de Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1165773 Signed-off-by: Ard Biesheuvel --- include/linux/tpm_eventlog.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/include/linux/tpm_eventlog.h b/include/linux/tpm_eventlog.h index 4f8c90c93c29..64356b199e94 100644 --- a/include/linux/tpm_eventlog.h +++ b/include/linux/tpm_eventlog.h @@ -81,6 +81,8 @@ struct tcg_efi_specid_event_algs { u16 digest_size; } __packed; +#define TCG_SPECID_SIG "Spec ID Event03" + struct tcg_efi_specid_event_head { u8 signature[16]; u32 platform_class; @@ -171,6 +173,7 @@ static inline int __calc_tpm2_event_size(struct tcg_pcr_event2_head *event, int i; int j; u32 count, event_type; + const u8 zero_digest[sizeof(event_header->digest)] = {0}; marker = event; marker_start = marker; @@ -198,10 +201,19 @@ static inline int __calc_tpm2_event_size(struct tcg_pcr_event2_head *event, count = READ_ONCE(event->count); event_type = READ_ONCE(event->event_type); + /* Verify that it's the log header */ + if (event_header->pcr_idx != 0 || + event_header->event_type != NO_ACTION || + memcmp(event_header->digest, zero_digest, sizeof(zero_digest))) { + size = 0; + goto out; + } + efispecid = (struct tcg_efi_specid_event_head *)event_header->event; /* Check if event is malformed. */ - if (count > efispecid->num_algs) { + if (memcmp(efispecid->signature, TCG_SPECID_SIG, + sizeof(TCG_SPECID_SIG)) || count > efispecid->num_algs) { size = 0; goto out; } From 4ddf4739be6e375116c375f0a68bf3893ffcee21 Mon Sep 17 00:00:00 2001 From: Qiushi Wu Date: Thu, 28 May 2020 13:38:04 -0500 Subject: [PATCH 065/618] efi/esrt: Fix reference count leak in esre_create_sysfs_entry. kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous commit "b8eb718348b8" fixed a similar problem. Fixes: 0bb549052d33 ("efi: Add esrt support") Signed-off-by: Qiushi Wu Link: https://lore.kernel.org/r/20200528183804.4497-1-wu000273@umn.edu Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/esrt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/efi/esrt.c b/drivers/firmware/efi/esrt.c index e3d692696583..d5915272141f 100644 --- a/drivers/firmware/efi/esrt.c +++ b/drivers/firmware/efi/esrt.c @@ -181,7 +181,7 @@ static int esre_create_sysfs_entry(void *esre, int entry_num) rc = kobject_init_and_add(&entry->kobj, &esre1_ktype, NULL, "entry%d", entry_num); if (rc) { - kfree(entry); + kobject_put(&entry->kobj); return rc; } } From 2096721f1577b51b574fa06a7d91823dffe7267a Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Thu, 28 May 2020 12:49:04 -0700 Subject: [PATCH 066/618] efivarfs: Update inode modification time for successful writes Some applications want to be able to see when EFI variables have been updated. Update the modification time for successful writes. Reported-by: Lennart Poettering Signed-off-by: Tony Luck Link: https://lore.kernel.org/r/20200528194905.690-2-tony.luck@intel.com Signed-off-by: Ard Biesheuvel --- fs/efivarfs/file.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/efivarfs/file.c b/fs/efivarfs/file.c index e9e27a271af0..4b8bc4560d70 100644 --- a/fs/efivarfs/file.c +++ b/fs/efivarfs/file.c @@ -51,6 +51,7 @@ static ssize_t efivarfs_file_write(struct file *file, } else { inode_lock(inode); i_size_write(inode, datasize + sizeof(attributes)); + inode->i_mtime = current_time(inode); inode_unlock(inode); } From 4353f03317fd3eb0bd803b61bdb287b68736a728 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Thu, 28 May 2020 12:49:05 -0700 Subject: [PATCH 067/618] efivarfs: Don't return -EINTR when rate-limiting reads Applications that read EFI variables may see a return value of -EINTR if they exceed the rate limit and a signal delivery is attempted while the process is sleeping. This is quite surprising to the application, which probably doesn't have code to handle it. Change the interruptible sleep to a non-interruptible one. Reported-by: Lennart Poettering Signed-off-by: Tony Luck Link: https://lore.kernel.org/r/20200528194905.690-3-tony.luck@intel.com Signed-off-by: Ard Biesheuvel --- fs/efivarfs/file.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/fs/efivarfs/file.c b/fs/efivarfs/file.c index 4b8bc4560d70..feaa5e182b7b 100644 --- a/fs/efivarfs/file.c +++ b/fs/efivarfs/file.c @@ -73,10 +73,8 @@ static ssize_t efivarfs_file_read(struct file *file, char __user *userbuf, ssize_t size = 0; int err; - while (!__ratelimit(&file->f_cred->user->ratelimit)) { - if (!msleep_interruptible(50)) - return -EINTR; - } + while (!__ratelimit(&file->f_cred->user->ratelimit)) + msleep(50); err = efivar_entry_size(var, &datasize); From 2963795122f50b36ed16e3ba880c3ed2de1bda6e Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 27 May 2020 12:14:25 -0500 Subject: [PATCH 068/618] efi: Replace zero-length array and use struct_size() helper The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. Lastly, make use of the sizeof_field() helper instead of an open-coded version. This issue was found with the help of Coccinelle and audited _manually_. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Link: https://lore.kernel.org/r/20200527171425.GA4053@embeddedor Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/efi.c | 3 ++- include/linux/efi.h | 7 ++----- 2 files changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c index 7f1657b6c30d..edc5d36caf54 100644 --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -622,7 +622,8 @@ int __init efi_config_parse_tables(const efi_config_table_t *config_tables, rsv = (void *)(p + prsv % PAGE_SIZE); /* reserve the entry itself */ - memblock_reserve(prsv, EFI_MEMRESERVE_SIZE(rsv->size)); + memblock_reserve(prsv, + struct_size(rsv, entry, rsv->size)); for (i = 0; i < atomic_read(&rsv->count); i++) { memblock_reserve(rsv->entry[i].base, diff --git a/include/linux/efi.h b/include/linux/efi.h index 2c6495f72f79..c3449c9699d0 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -1236,14 +1236,11 @@ struct linux_efi_memreserve { struct { phys_addr_t base; phys_addr_t size; - } entry[0]; + } entry[]; }; -#define EFI_MEMRESERVE_SIZE(count) (sizeof(struct linux_efi_memreserve) + \ - (count) * sizeof(((struct linux_efi_memreserve *)0)->entry[0])) - #define EFI_MEMRESERVE_COUNT(size) (((size) - sizeof(struct linux_efi_memreserve)) \ - / sizeof(((struct linux_efi_memreserve *)0)->entry[0])) + / sizeof_field(struct linux_efi_memreserve, entry[0])) void __init efi_arch_mem_reserve(phys_addr_t addr, u64 size); From 0fae253af563cf5d1f5dc651d520c3eafd74f183 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Fri, 12 Jun 2020 15:59:37 -0500 Subject: [PATCH 069/618] ASoC: soc-devres: add devm_snd_soc_register_dai() The registration of DAIs may be done at two distinct times, once during a component registration and later when loading a topology. Since devm_ managed resources are freed in the reverse order they were allocated, when a component starts unregistering DAIs by walking through the DAI list, the memory allocated for the topology-registered DAIs was freed already, which leads to 100% reproducible KASAN use-after-free reports. This patch suggests a new devm_ function to force the DAI list to be updated prior to freeing the memory chunks referenced by the list pointers. Suggested-by: Bard Liao Signed-off-by: Pierre-Louis Bossart Reviewed-by: Ranjani Sridharan Reviewed-by: Bard Liao Reviewed-by: Kai Vehmanen BugLink: https://github.com/thesofproject/linux/issues/2186 Link: https://lore.kernel.org/r/20200612205938.26415-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- include/sound/soc.h | 4 ++++ sound/soc/soc-devres.c | 37 +++++++++++++++++++++++++++++++++++++ 2 files changed, 41 insertions(+) diff --git a/include/sound/soc.h b/include/sound/soc.h index 565612a8d690..fddab504c227 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -1363,6 +1363,10 @@ void snd_soc_remove_pcm_runtime(struct snd_soc_card *card, struct snd_soc_dai *snd_soc_register_dai(struct snd_soc_component *component, struct snd_soc_dai_driver *dai_drv, bool legacy_dai_naming); +struct snd_soc_dai *devm_snd_soc_register_dai(struct device *dev, + struct snd_soc_component *component, + struct snd_soc_dai_driver *dai_drv, + bool legacy_dai_naming); void snd_soc_unregister_dai(struct snd_soc_dai *dai); struct snd_soc_dai *snd_soc_find_dai( diff --git a/sound/soc/soc-devres.c b/sound/soc/soc-devres.c index a9ea172a66a7..11e5d7962370 100644 --- a/sound/soc/soc-devres.c +++ b/sound/soc/soc-devres.c @@ -9,6 +9,43 @@ #include #include +static void devm_dai_release(struct device *dev, void *res) +{ + snd_soc_unregister_dai(*(struct snd_soc_dai **)res); +} + +/** + * devm_snd_soc_register_dai - resource-managed dai registration + * @dev: Device used to manage component + * @component: The component the DAIs are registered for + * @dai_drv: DAI driver to use for the DAI + * @legacy_dai_naming: if %true, use legacy single-name format; + * if %false, use multiple-name format; + */ +struct snd_soc_dai *devm_snd_soc_register_dai(struct device *dev, + struct snd_soc_component *component, + struct snd_soc_dai_driver *dai_drv, + bool legacy_dai_naming) +{ + struct snd_soc_dai **ptr; + struct snd_soc_dai *dai; + + ptr = devres_alloc(devm_dai_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return NULL; + + dai = snd_soc_register_dai(component, dai_drv, legacy_dai_naming); + if (dai) { + *ptr = dai; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return dai; +} +EXPORT_SYMBOL_GPL(devm_snd_soc_register_dai); + static void devm_component_release(struct device *dev, void *res) { snd_soc_unregister_component(*(struct device **)res); From 6ae4902f2f3400503f9b78e87e8371e4ffde1e0c Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Fri, 12 Jun 2020 15:59:38 -0500 Subject: [PATCH 070/618] ASoC: soc-topology: use devm_snd_soc_register_dai() Use devm_ to avoid use-after-free KASAN reports and simplify error handling. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Ranjani Sridharan Reviewed-by: Bard Liao Reviewed-by: Kai Vehmanen BugLink: https://github.com/thesofproject/linux/issues/2186 Link: https://lore.kernel.org/r/20200612205938.26415-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/soc-topology.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c index 9e89633676b7..43e5745b06aa 100644 --- a/sound/soc/soc-topology.c +++ b/sound/soc/soc-topology.c @@ -1851,7 +1851,7 @@ static int soc_tplg_dai_create(struct soc_tplg *tplg, list_add(&dai_drv->dobj.list, &tplg->comp->dobj_list); /* register the DAI to the component */ - dai = snd_soc_register_dai(tplg->comp, dai_drv, false); + dai = devm_snd_soc_register_dai(tplg->comp->dev, tplg->comp, dai_drv, false); if (!dai) return -ENOMEM; @@ -1859,7 +1859,6 @@ static int soc_tplg_dai_create(struct soc_tplg *tplg, ret = snd_soc_dapm_new_dai_widgets(dapm, dai); if (ret != 0) { dev_err(dai->dev, "Failed to create DAI widgets %d\n", ret); - snd_soc_unregister_dai(dai); return ret; } From b95273f1272398a9f7145de37703f1930244e465 Mon Sep 17 00:00:00 2001 From: Qian Cai Date: Wed, 15 Apr 2020 11:37:09 -0400 Subject: [PATCH 071/618] kvm/svm: disable KCSAN for svm_vcpu_run() For some reasons, running a simple qemu-kvm command with KCSAN will reset AMD hosts. It turns out svm_vcpu_run() could not be instrumented. Disable it for now. # /usr/libexec/qemu-kvm -name ubuntu-18.04-server-cloudimg -cpu host -smp 2 -m 2G -hda ubuntu-18.04-server-cloudimg.qcow2 === console output === Kernel 5.6.0-next-20200408+ on an x86_64 hp-dl385g10-05 login: <...host reset...> HPE ProLiant System BIOS A40 v1.20 (03/09/2018) (C) Copyright 1982-2018 Hewlett Packard Enterprise Development LP Early system initialization, please wait... Signed-off-by: Qian Cai Message-Id: <20200415153709.1559-1-cai@lca.pw> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/svm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index 8ccfa4197d9c..c0da4dd78ac5 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -3344,7 +3344,7 @@ static fastpath_t svm_exit_handlers_fastpath(struct kvm_vcpu *vcpu) void __svm_vcpu_run(unsigned long vmcb_pa, unsigned long *regs); -static fastpath_t svm_vcpu_run(struct kvm_vcpu *vcpu) +static __no_kcsan fastpath_t svm_vcpu_run(struct kvm_vcpu *vcpu) { fastpath_t exit_fastpath; struct vcpu_svm *svm = to_svm(vcpu); From 2ef5612391f0a7a631c42a8afc867095b49a1992 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 4 Jun 2020 15:39:02 +0100 Subject: [PATCH 072/618] RDMA/mlx5: Remove duplicated assignment to resp.response_length The assignment to resp.response_length is never read since it is being updated again on the next statement. The assignment is redundant so removed it. Fixes: a645a89d9a78 ("RDMA/mlx5: Return ECE DC support") Link: https://lore.kernel.org/r/20200604143902.56021-1-colin.king@canonical.com Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King Acked-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/qp.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 81bf6b975e0e..d61ca85033de 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -4162,8 +4162,6 @@ static int mlx5_ib_modify_dct(struct ib_qp *ibqp, struct ib_qp_attr *attr, if (udata->outlen < min_resp_len) return -EINVAL; - resp.response_length = min_resp_len; - /* * If we don't have enough space for the ECE options, * simply indicate it with resp.response_length. From 19ab0f005b165146ea4a93f71e9cb5e71de9c0ce Mon Sep 17 00:00:00 2001 From: "derek.fang" Date: Fri, 12 Jun 2020 13:15:25 +0800 Subject: [PATCH 073/618] ASoC: rt5682: Let dai clks be registered whether mclk exists or not According to ideal rt5682 CCF, the root clk is mclk. But in some platforms, mclk is not exported to CCF. In this condition, rt5682_register_dai_clks will not be called. This patch lets dai clks could be registered whether mclk exists or not. Signed-off-by: derek.fang Link: https://lore.kernel.org/r/1591938925-1070-5-git-send-email-derek.fang@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt5682.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index d3245123101d..3e9d2c6c51f9 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -2829,12 +2829,13 @@ static int rt5682_probe(struct snd_soc_component *component) return ret; } rt5682->mclk = NULL; - } else { - /* Register CCF DAI clock control */ - ret = rt5682_register_dai_clks(component); - if (ret) - return ret; } + + /* Register CCF DAI clock control */ + ret = rt5682_register_dai_clks(component); + if (ret) + return ret; + /* Initial setup for CCF */ rt5682->lrck[RT5682_AIF1] = CLK_48; #endif From 96bf62f018f40cb5d4e4bed95e50fd990a2354af Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Fri, 12 Jun 2020 15:35:07 -0500 Subject: [PATCH 074/618] ASoC: soc-pcm: fix checks for multi-cpu FE dailinks soc_dpcm_fe_runtime_update() is called for all dailinks, and we want to first discard all back-ends, then deal with front-ends. The existing code first reports an error with multi-cpu front-ends, and that check needs to be moved after we know that we are dealing with a front-end. Fixes: 6e1276a5e613d ('ASoC: Return error if the function does not support multi-cpu') Signed-off-by: Pierre-Louis Bossart Reviewed-by: Ranjani Sridharan Reviewed-by: Bard Liao BugLink: https://github.com/thesofproject/linux/issues/1970 Link: https://lore.kernel.org/r/20200612203507.25621-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/soc-pcm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 2c114b4542ce..c517064f5391 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -2630,15 +2630,15 @@ static int soc_dpcm_fe_runtime_update(struct snd_soc_pcm_runtime *fe, int new) int count, paths; int ret; + if (!fe->dai_link->dynamic) + return 0; + if (fe->num_cpus > 1) { dev_err(fe->dev, "%s doesn't support Multi CPU yet\n", __func__); return -EINVAL; } - if (!fe->dai_link->dynamic) - return 0; - /* only check active links */ if (!snd_soc_dai_active(asoc_rtd_to_cpu(fe, 0))) return 0; From 4a95737440d426e93441d49d11abf4c6526d4666 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 12 Jun 2020 13:37:10 +0100 Subject: [PATCH 075/618] ASoc: q6afe: add support to get port direction This patch adds support to q6afe_is_rx_port() to get direction of DSP BE dai port, this is useful for setting dailink directions correctly. Fixes: c25e295cd77b (ASoC: qcom: Add support to parse common audio device nodes) Reported-by: John Stultz Signed-off-by: Srinivas Kandagatla Reviewed-by: Vinod Koul Link: https://lore.kernel.org/r/20200612123711.29130-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6afe.c | 8 ++++++++ sound/soc/qcom/qdsp6/q6afe.h | 1 + 2 files changed, 9 insertions(+) diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c index e0945f7a58c8..0ce4eb60f984 100644 --- a/sound/soc/qcom/qdsp6/q6afe.c +++ b/sound/soc/qcom/qdsp6/q6afe.c @@ -800,6 +800,14 @@ int q6afe_get_port_id(int index) } EXPORT_SYMBOL_GPL(q6afe_get_port_id); +int q6afe_is_rx_port(int index) +{ + if (index < 0 || index >= AFE_PORT_MAX) + return -EINVAL; + + return port_maps[index].is_rx; +} +EXPORT_SYMBOL_GPL(q6afe_is_rx_port); static int afe_apr_send_pkt(struct q6afe *afe, struct apr_pkt *pkt, struct q6afe_port *port) { diff --git a/sound/soc/qcom/qdsp6/q6afe.h b/sound/soc/qcom/qdsp6/q6afe.h index c7ed5422baff..1a0f80a14afe 100644 --- a/sound/soc/qcom/qdsp6/q6afe.h +++ b/sound/soc/qcom/qdsp6/q6afe.h @@ -198,6 +198,7 @@ int q6afe_port_start(struct q6afe_port *port); int q6afe_port_stop(struct q6afe_port *port); void q6afe_port_put(struct q6afe_port *port); int q6afe_get_port_id(int index); +int q6afe_is_rx_port(int index); void q6afe_hdmi_port_prepare(struct q6afe_port *port, struct q6afe_hdmi_cfg *cfg); void q6afe_slim_port_prepare(struct q6afe_port *port, From a2120089251f1fe221305e88df99af16f940e236 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 12 Jun 2020 13:37:11 +0100 Subject: [PATCH 076/618] ASoC: qcom: common: set correct directions for dailinks Currently both FE and BE dai-links are configured bi-directional, However the DSP BE dais are only single directional, so set the directions as supported by the BE dais. Fixes: c25e295cd77b (ASoC: qcom: Add support to parse common audio device nodes) Reported-by: John Stultz Signed-off-by: Srinivas Kandagatla Tested-by: John Stultz Reviewed-by: Vinod Koul Link: https://lore.kernel.org/r/20200612123711.29130-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown --- sound/soc/qcom/common.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/sound/soc/qcom/common.c b/sound/soc/qcom/common.c index 6c20bdd850f3..8ada4ecba847 100644 --- a/sound/soc/qcom/common.c +++ b/sound/soc/qcom/common.c @@ -4,6 +4,7 @@ #include #include "common.h" +#include "qdsp6/q6afe.h" int qcom_snd_parse_of(struct snd_soc_card *card) { @@ -101,6 +102,15 @@ int qcom_snd_parse_of(struct snd_soc_card *card) } link->no_pcm = 1; link->ignore_pmdown_time = 1; + + if (q6afe_is_rx_port(link->id)) { + link->dpcm_playback = 1; + link->dpcm_capture = 0; + } else { + link->dpcm_playback = 0; + link->dpcm_capture = 1; + } + } else { dlc = devm_kzalloc(dev, sizeof(*dlc), GFP_KERNEL); if (!dlc) @@ -113,12 +123,12 @@ int qcom_snd_parse_of(struct snd_soc_card *card) link->codecs->dai_name = "snd-soc-dummy-dai"; link->codecs->name = "snd-soc-dummy"; link->dynamic = 1; + link->dpcm_playback = 1; + link->dpcm_capture = 1; } link->ignore_suspend = 1; link->nonatomic = 1; - link->dpcm_playback = 1; - link->dpcm_capture = 1; link->stream_name = link->name; link++; From e74a1e7eaed95f2c6422e7cf9ed70154f17a6db3 Mon Sep 17 00:00:00 2001 From: Jack Yu Date: Mon, 15 Jun 2020 11:24:32 +0800 Subject: [PATCH 077/618] ASoC: rt1015: Update rt1015 default register value according to spec modification. Update rt1015 default register value according to spec modification. Signed-off-by: Jack Yu Link: https://lore.kernel.org/r/20200615032433.31061-1-jack.yu@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt1015.c | 124 +++++++++++++++++++++++--------------- sound/soc/codecs/rt1015.h | 15 ++++- 2 files changed, 89 insertions(+), 50 deletions(-) diff --git a/sound/soc/codecs/rt1015.c b/sound/soc/codecs/rt1015.c index 67e2e944d21b..2cccb310fa96 100644 --- a/sound/soc/codecs/rt1015.c +++ b/sound/soc/codecs/rt1015.c @@ -34,30 +34,32 @@ static const struct reg_default rt1015_reg[] = { { 0x0000, 0x0000 }, { 0x0004, 0xa000 }, { 0x0006, 0x0003 }, - { 0x000a, 0x0802 }, - { 0x000c, 0x0020 }, + { 0x000a, 0x081e }, + { 0x000c, 0x0006 }, { 0x000e, 0x0000 }, { 0x0010, 0x0000 }, { 0x0012, 0x0000 }, + { 0x0014, 0x0000 }, + { 0x0016, 0x0000 }, + { 0x0018, 0x0000 }, { 0x0020, 0x8000 }, - { 0x0022, 0x471b }, - { 0x006a, 0x0000 }, - { 0x006c, 0x4020 }, + { 0x0022, 0x8043 }, { 0x0076, 0x0000 }, { 0x0078, 0x0000 }, - { 0x007a, 0x0000 }, + { 0x007a, 0x0002 }, { 0x007c, 0x10ec }, { 0x007d, 0x1015 }, { 0x00f0, 0x5000 }, - { 0x00f2, 0x0774 }, - { 0x00f3, 0x8400 }, + { 0x00f2, 0x004c }, + { 0x00f3, 0xecfe }, { 0x00f4, 0x0000 }, + { 0x00f6, 0x0400 }, { 0x0100, 0x0028 }, { 0x0102, 0xff02 }, - { 0x0104, 0x8232 }, + { 0x0104, 0xa213 }, { 0x0106, 0x200c }, - { 0x010c, 0x002f }, - { 0x010e, 0xc000 }, + { 0x010c, 0x0000 }, + { 0x010e, 0x0058 }, { 0x0111, 0x0200 }, { 0x0112, 0x0400 }, { 0x0114, 0x0022 }, @@ -65,38 +67,46 @@ static const struct reg_default rt1015_reg[] = { { 0x0118, 0x0000 }, { 0x011a, 0x0123 }, { 0x011c, 0x4567 }, - { 0x0300, 0xdddd }, - { 0x0302, 0x0000 }, - { 0x0311, 0x9330 }, - { 0x0313, 0x0000 }, - { 0x0314, 0x0000 }, + { 0x0300, 0x203d }, + { 0x0302, 0x001e }, + { 0x0311, 0x0000 }, + { 0x0313, 0x6014 }, + { 0x0314, 0x00a2 }, { 0x031a, 0x00a0 }, { 0x031c, 0x001f }, { 0x031d, 0xffff }, { 0x031e, 0x0000 }, { 0x031f, 0x0000 }, + { 0x0320, 0x0000 }, { 0x0321, 0x0000 }, - { 0x0322, 0x0000 }, - { 0x0328, 0x0000 }, - { 0x0329, 0x0000 }, - { 0x032a, 0x0000 }, - { 0x032b, 0x0000 }, - { 0x032c, 0x0000 }, - { 0x032d, 0x0000 }, - { 0x032e, 0x030e }, - { 0x0330, 0x0080 }, + { 0x0322, 0xd7df }, + { 0x0328, 0x10b2 }, + { 0x0329, 0x0175 }, + { 0x032a, 0x36ad }, + { 0x032b, 0x7e55 }, + { 0x032c, 0x0520 }, + { 0x032d, 0xaa00 }, + { 0x032e, 0x570e }, + { 0x0330, 0xe180 }, { 0x0332, 0x0034 }, - { 0x0334, 0x0000 }, - { 0x0336, 0x0000 }, + { 0x0334, 0x0001 }, + { 0x0336, 0x0010 }, + { 0x0338, 0x0000 }, + { 0x04fa, 0x0030 }, + { 0x04fc, 0x35c8 }, + { 0x04fe, 0x0800 }, + { 0x0500, 0x0400 }, + { 0x0502, 0x1000 }, + { 0x0504, 0x0000 }, { 0x0506, 0x04ff }, - { 0x0508, 0x0030 }, - { 0x050a, 0x0018 }, - { 0x0519, 0x307f }, - { 0x051a, 0xffff }, - { 0x051b, 0x4000 }, + { 0x0508, 0x0010 }, + { 0x050a, 0x001a }, + { 0x0519, 0x1c68 }, + { 0x051a, 0x0ccc }, + { 0x051b, 0x0666 }, { 0x051d, 0x0000 }, { 0x051f, 0x0000 }, - { 0x0536, 0x1000 }, + { 0x0536, 0x061c }, { 0x0538, 0x0000 }, { 0x053a, 0x0000 }, { 0x053c, 0x0000 }, @@ -110,19 +120,18 @@ static const struct reg_default rt1015_reg[] = { { 0x0544, 0x0000 }, { 0x0568, 0x0000 }, { 0x056a, 0x0000 }, - { 0x1000, 0x0000 }, - { 0x1002, 0x6505 }, + { 0x1000, 0x0040 }, + { 0x1002, 0x5405 }, { 0x1006, 0x5515 }, - { 0x1007, 0x003f }, - { 0x1009, 0x770f }, - { 0x100a, 0x01ff }, - { 0x100c, 0x0000 }, + { 0x1007, 0x05f7 }, + { 0x1009, 0x0b0a }, + { 0x100a, 0x00ef }, { 0x100d, 0x0003 }, { 0x1010, 0xa433 }, { 0x1020, 0x0000 }, - { 0x1200, 0x3d02 }, - { 0x1202, 0x0813 }, - { 0x1204, 0x0211 }, + { 0x1200, 0x5a01 }, + { 0x1202, 0x6524 }, + { 0x1204, 0x1f00 }, { 0x1206, 0x0000 }, { 0x1208, 0x0000 }, { 0x120a, 0x0000 }, @@ -130,16 +139,16 @@ static const struct reg_default rt1015_reg[] = { { 0x120e, 0x0000 }, { 0x1210, 0x0000 }, { 0x1212, 0x0000 }, - { 0x1300, 0x0701 }, - { 0x1302, 0x12f9 }, - { 0x1304, 0x3405 }, + { 0x1300, 0x10a1 }, + { 0x1302, 0x12ff }, + { 0x1304, 0x0400 }, { 0x1305, 0x0844 }, - { 0x1306, 0x1611 }, + { 0x1306, 0x4611 }, { 0x1308, 0x555e }, { 0x130a, 0x0000 }, - { 0x130c, 0x2400}, - { 0x130e, 0x7700 }, - { 0x130f, 0x0000 }, + { 0x130c, 0x2000 }, + { 0x130e, 0x0100 }, + { 0x130f, 0x0001 }, { 0x1310, 0x0000 }, { 0x1312, 0x0000 }, { 0x1314, 0x0000 }, @@ -209,6 +218,9 @@ static bool rt1015_volatile_register(struct device *dev, unsigned int reg) case RT1015_DC_CALIB_CLSD7: case RT1015_DC_CALIB_CLSD8: case RT1015_S_BST_TIMING_INTER1: + case RT1015_OSCK_STA: + case RT1015_MONO_DYNA_CTRL1: + case RT1015_MONO_DYNA_CTRL5: return true; default: @@ -224,6 +236,12 @@ static bool rt1015_readable_register(struct device *dev, unsigned int reg) case RT1015_CLK3: case RT1015_PLL1: case RT1015_PLL2: + case RT1015_DUM_RW1: + case RT1015_DUM_RW2: + case RT1015_DUM_RW3: + case RT1015_DUM_RW4: + case RT1015_DUM_RW5: + case RT1015_DUM_RW6: case RT1015_CLK_DET: case RT1015_SIL_DET: case RT1015_CUSTOMER_ID: @@ -235,6 +253,7 @@ static bool rt1015_readable_register(struct device *dev, unsigned int reg) case RT1015_PAD_DRV2: case RT1015_GAT_BOOST: case RT1015_PRO_ALT: + case RT1015_OSCK_STA: case RT1015_MAN_I2C: case RT1015_DAC1: case RT1015_DAC2: @@ -272,6 +291,13 @@ static bool rt1015_readable_register(struct device *dev, unsigned int reg) case RT1015_SMART_BST_CTRL2: case RT1015_ANA_CTRL1: case RT1015_ANA_CTRL2: + case RT1015_PWR_STATE_CTRL: + case RT1015_MONO_DYNA_CTRL: + case RT1015_MONO_DYNA_CTRL1: + case RT1015_MONO_DYNA_CTRL2: + case RT1015_MONO_DYNA_CTRL3: + case RT1015_MONO_DYNA_CTRL4: + case RT1015_MONO_DYNA_CTRL5: case RT1015_SPK_VOL: case RT1015_SHORT_DETTOP1: case RT1015_SHORT_DETTOP2: diff --git a/sound/soc/codecs/rt1015.h b/sound/soc/codecs/rt1015.h index 6fbe802082c4..8169962935a5 100644 --- a/sound/soc/codecs/rt1015.h +++ b/sound/soc/codecs/rt1015.h @@ -21,6 +21,12 @@ #define RT1015_CLK3 0x0006 #define RT1015_PLL1 0x000a #define RT1015_PLL2 0x000c +#define RT1015_DUM_RW1 0x000e +#define RT1015_DUM_RW2 0x0010 +#define RT1015_DUM_RW3 0x0012 +#define RT1015_DUM_RW4 0x0014 +#define RT1015_DUM_RW5 0x0016 +#define RT1015_DUM_RW6 0x0018 #define RT1015_CLK_DET 0x0020 #define RT1015_SIL_DET 0x0022 #define RT1015_CUSTOMER_ID 0x0076 @@ -32,6 +38,7 @@ #define RT1015_PAD_DRV2 0x00f2 #define RT1015_GAT_BOOST 0x00f3 #define RT1015_PRO_ALT 0x00f4 +#define RT1015_OSCK_STA 0x00f6 #define RT1015_MAN_I2C 0x0100 #define RT1015_DAC1 0x0102 #define RT1015_DAC2 0x0104 @@ -70,7 +77,13 @@ #define RT1015_ANA_CTRL1 0x0334 #define RT1015_ANA_CTRL2 0x0336 #define RT1015_PWR_STATE_CTRL 0x0338 -#define RT1015_SPK_VOL 0x0506 +#define RT1015_MONO_DYNA_CTRL 0x04fa +#define RT1015_MONO_DYNA_CTRL1 0x04fc +#define RT1015_MONO_DYNA_CTRL2 0x04fe +#define RT1015_MONO_DYNA_CTRL3 0x0500 +#define RT1015_MONO_DYNA_CTRL4 0x0502 +#define RT1015_MONO_DYNA_CTRL5 0x0504 +#define RT1015_SPK_VOL 0x0506 #define RT1015_SHORT_DETTOP1 0x0508 #define RT1015_SHORT_DETTOP2 0x050a #define RT1015_SPK_DC_DETECT1 0x0519 From 40e2c465894e5b79b49f55d9574dbcda4ac0f08f Mon Sep 17 00:00:00 2001 From: Brent Lu Date: Fri, 12 Jun 2020 18:50:48 +0800 Subject: [PATCH 078/618] ASoC: SOF: Intel: hda: Clear RIRB status before reading WP Port commit 6d011d5057ff ("ALSA: hda: Clear RIRB status before reading WP") from legacy HDA driver to fix the get response timeout issue. Current SOF driver does not suffer from this issue because sync write is enabled in hda_init. The issue will come back if the sync write is disabled for some reason. Signed-off-by: Brent Lu Reviewed-by: Takashi Iwai Reviewed-by: Kai Vehmanen Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/1591959048-15813-1-git-send-email-brent.lu@intel.com Signed-off-by: Mark Brown --- sound/soc/sof/intel/hda-stream.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/sound/soc/sof/intel/hda-stream.c b/sound/soc/sof/intel/hda-stream.c index 7f65dcc95811..1bda14c3590c 100644 --- a/sound/soc/sof/intel/hda-stream.c +++ b/sound/soc/sof/intel/hda-stream.c @@ -653,11 +653,16 @@ irqreturn_t hda_dsp_stream_threaded_handler(int irq, void *context) if (status & AZX_INT_CTRL_EN) { rirb_status = snd_hdac_chip_readb(bus, RIRBSTS); if (rirb_status & RIRB_INT_MASK) { + /* + * Clearing the interrupt status here ensures + * that no interrupt gets masked after the RIRB + * wp is read in snd_hdac_bus_update_rirb. + */ + snd_hdac_chip_writeb(bus, RIRBSTS, + RIRB_INT_MASK); active = true; if (rirb_status & RIRB_INT_RESPONSE) snd_hdac_bus_update_rirb(bus); - snd_hdac_chip_writeb(bus, RIRBSTS, - RIRB_INT_MASK); } } #endif From 6f1cf5257acc6e6242ddf2f52bc7912aed77b79f Mon Sep 17 00:00:00 2001 From: Robin Gong Date: Mon, 15 Jun 2020 05:54:08 +0800 Subject: [PATCH 079/618] regualtor: pfuze100: correct sw1a/sw2 on pfuze3000 PFUZE100_SWB_REG is not proper for sw1a/sw2, because enable_mask/enable_reg is not correct. On PFUZE3000, sw1a/sw2 should be the same as sw1a/sw2 on pfuze100 except that voltages are not linear, so add new PFUZE3000_SW_REG and pfuze3000_sw_regulator_ops which like the non-linear PFUZE100_SW_REG and pfuze100_sw_regulator_ops. Fixes: 1dced996ee70 ("regulator: pfuze100: update voltage setting for pfuze3000 sw1a") Reported-by: Christophe Meynard Signed-off-by: Robin Gong Link: https://lore.kernel.org/r/1592171648-8752-1-git-send-email-yibin.gong@nxp.com Signed-off-by: Mark Brown --- drivers/regulator/pfuze100-regulator.c | 60 +++++++++++++++++--------- 1 file changed, 39 insertions(+), 21 deletions(-) diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 689537927f6f..4c8e8b472287 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -209,6 +209,19 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = { }; +static const struct regulator_ops pfuze3000_sw_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = pfuze100_set_ramp_delay, + +}; + #define PFUZE100_FIXED_REG(_chip, _name, base, voltage) \ [_chip ## _ ## _name] = { \ .desc = { \ @@ -318,23 +331,28 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = { .stby_mask = 0x20, \ } - -#define PFUZE3000_SW2_REG(_chip, _name, base, min, max, step) { \ - .desc = { \ - .name = #_name,\ - .n_voltages = ((max) - (min)) / (step) + 1, \ - .ops = &pfuze100_sw_regulator_ops, \ - .type = REGULATOR_VOLTAGE, \ - .id = _chip ## _ ## _name, \ - .owner = THIS_MODULE, \ - .min_uV = (min), \ - .uV_step = (step), \ - .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ - .vsel_mask = 0x7, \ - }, \ - .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ - .stby_mask = 0x7, \ -} +/* No linar case for the some switches of PFUZE3000 */ +#define PFUZE3000_SW_REG(_chip, _name, base, mask, voltages) \ + [_chip ## _ ## _name] = { \ + .desc = { \ + .name = #_name, \ + .n_voltages = ARRAY_SIZE(voltages), \ + .ops = &pfuze3000_sw_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _chip ## _ ## _name, \ + .owner = THIS_MODULE, \ + .volt_table = voltages, \ + .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ + .vsel_mask = (mask), \ + .enable_reg = (base) + PFUZE100_MODE_OFFSET, \ + .enable_mask = 0xf, \ + .enable_val = 0x8, \ + .enable_time = 500, \ + }, \ + .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ + .stby_mask = (mask), \ + .sw_reg = true, \ + } #define PFUZE3000_SW3_REG(_chip, _name, base, min, max, step) { \ .desc = { \ @@ -391,9 +409,9 @@ static struct pfuze_regulator pfuze200_regulators[] = { }; static struct pfuze_regulator pfuze3000_regulators[] = { - PFUZE100_SWB_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), + PFUZE3000_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000), - PFUZE100_SWB_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), + PFUZE3000_SW_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), PFUZE100_SWB_REG(PFUZE3000, SWBST, PFUZE100_SWBSTCON1, 0x3, pfuze100_swbst), PFUZE100_SWB_REG(PFUZE3000, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), @@ -407,8 +425,8 @@ static struct pfuze_regulator pfuze3000_regulators[] = { }; static struct pfuze_regulator pfuze3001_regulators[] = { - PFUZE100_SWB_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), - PFUZE100_SWB_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), + PFUZE3000_SW_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), + PFUZE3000_SW_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), PFUZE3000_SW3_REG(PFUZE3001, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), PFUZE100_SWB_REG(PFUZE3001, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), PFUZE100_VGEN_REG(PFUZE3001, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000), From 27784a256c2a453d891c0aaff84c3ac3f2e8a5a0 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sat, 13 Jun 2020 09:37:54 +0200 Subject: [PATCH 080/618] spi: uapi: spidev: Use TABs for alignment The UAPI uses TABs for alignment. Convert the recently introduced spaces to TABs to restore consistency. Fixes: 7bb64402a092136 ("spi: tools: Add macro definitions to fix build errors") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20200613073755.15906-1-geert+renesas@glider.be Signed-off-by: Mark Brown --- include/uapi/linux/spi/spidev.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/uapi/linux/spi/spidev.h b/include/uapi/linux/spi/spidev.h index 9390615d52f0..d56427c0b3e0 100644 --- a/include/uapi/linux/spi/spidev.h +++ b/include/uapi/linux/spi/spidev.h @@ -48,10 +48,10 @@ #define SPI_TX_QUAD 0x200 #define SPI_RX_DUAL 0x400 #define SPI_RX_QUAD 0x800 -#define SPI_CS_WORD 0x1000 -#define SPI_TX_OCTAL 0x2000 -#define SPI_RX_OCTAL 0x4000 -#define SPI_3WIRE_HIZ 0x8000 +#define SPI_CS_WORD 0x1000 +#define SPI_TX_OCTAL 0x2000 +#define SPI_RX_OCTAL 0x4000 +#define SPI_3WIRE_HIZ 0x8000 /*---------------------------------------------------------------------------*/ From 88c200d929c969408779dbae4c4fad32bc510373 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Mon, 8 Jun 2020 18:45:18 -0700 Subject: [PATCH 081/618] KVM: VMX: Add helpers to identify interrupt type from intr_info Add is_intr_type() and is_intr_type_n() to consolidate the boilerplate code for querying a specific type of interrupt given an encoded value from VMCS.VM_{ENTER,EXIT}_INTR_INFO, with and without an associated vector respectively. Signed-off-by: Sean Christopherson Message-Id: <20200609014518.26756-1-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx/vmcs.h | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) diff --git a/arch/x86/kvm/vmx/vmcs.h b/arch/x86/kvm/vmx/vmcs.h index 5c0ff80b85c0..7a3675fddec2 100644 --- a/arch/x86/kvm/vmx/vmcs.h +++ b/arch/x86/kvm/vmx/vmcs.h @@ -72,11 +72,24 @@ struct loaded_vmcs { struct vmcs_controls_shadow controls_shadow; }; +static inline bool is_intr_type(u32 intr_info, u32 type) +{ + const u32 mask = INTR_INFO_VALID_MASK | INTR_INFO_INTR_TYPE_MASK; + + return (intr_info & mask) == (INTR_INFO_VALID_MASK | type); +} + +static inline bool is_intr_type_n(u32 intr_info, u32 type, u8 vector) +{ + const u32 mask = INTR_INFO_VALID_MASK | INTR_INFO_INTR_TYPE_MASK | + INTR_INFO_VECTOR_MASK; + + return (intr_info & mask) == (INTR_INFO_VALID_MASK | type | vector); +} + static inline bool is_exception_n(u32 intr_info, u8 vector) { - return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK | - INTR_INFO_VALID_MASK)) == - (INTR_TYPE_HARD_EXCEPTION | vector | INTR_INFO_VALID_MASK); + return is_intr_type_n(intr_info, INTR_TYPE_HARD_EXCEPTION, vector); } static inline bool is_debug(u32 intr_info) @@ -106,28 +119,23 @@ static inline bool is_gp_fault(u32 intr_info) static inline bool is_machine_check(u32 intr_info) { - return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK | - INTR_INFO_VALID_MASK)) == - (INTR_TYPE_HARD_EXCEPTION | MC_VECTOR | INTR_INFO_VALID_MASK); + return is_exception_n(intr_info, MC_VECTOR); } /* Undocumented: icebp/int1 */ static inline bool is_icebp(u32 intr_info) { - return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VALID_MASK)) - == (INTR_TYPE_PRIV_SW_EXCEPTION | INTR_INFO_VALID_MASK); + return is_intr_type(intr_info, INTR_TYPE_PRIV_SW_EXCEPTION); } static inline bool is_nmi(u32 intr_info) { - return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VALID_MASK)) - == (INTR_TYPE_NMI_INTR | INTR_INFO_VALID_MASK); + return is_intr_type(intr_info, INTR_TYPE_NMI_INTR); } static inline bool is_external_intr(u32 intr_info) { - return (intr_info & (INTR_INFO_VALID_MASK | INTR_INFO_INTR_TYPE_MASK)) - == (INTR_INFO_VALID_MASK | INTR_TYPE_EXT_INTR); + return is_intr_type(intr_info, INTR_TYPE_EXT_INTR); } enum vmcs_field_width { From 24552d10339f13d2174e013002da3ed90e26adda Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Mon, 15 Jun 2020 12:31:14 +0200 Subject: [PATCH 082/618] efi/libstub: Fix missing-prototype warning for skip_spaces() Include into skip_spaces.c to silence a compiler warning about a missing prototype. Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/libstub/skip_spaces.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/firmware/efi/libstub/skip_spaces.c b/drivers/firmware/efi/libstub/skip_spaces.c index a700b3c7f7d0..159fb4e456c6 100644 --- a/drivers/firmware/efi/libstub/skip_spaces.c +++ b/drivers/firmware/efi/libstub/skip_spaces.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include +#include #include char *skip_spaces(const char *str) From 7a88a6227dc7f2e723bba11ece05e57bd8dce8e4 Mon Sep 17 00:00:00 2001 From: Philipp Fent Date: Mon, 15 Jun 2020 13:51:09 +0200 Subject: [PATCH 083/618] efi/libstub: Fix path separator regression Commit 9302c1bb8e47 ("efi/libstub: Rewrite file I/O routine") introduced a regression that made a couple of (badly configured) systems fail to boot [1]: Until 5.6, we silently accepted Unix-style file separators in EFI paths, which might violate the EFI standard, but are an easy to make mistake. This fix restores the pre-5.7 behaviour. [1] https://bbs.archlinux.org/viewtopic.php?id=256273 Fixes: 9302c1bb8e47 ("efi/libstub: Rewrite file I/O routine") Signed-off-by: Philipp Fent Link: https://lore.kernel.org/r/20200615115109.7823-1-fent@in.tum.de [ardb: rewrite as chained if/else statements] Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/libstub/file.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/firmware/efi/libstub/file.c b/drivers/firmware/efi/libstub/file.c index 2005e33b33d5..630caa6b1f4c 100644 --- a/drivers/firmware/efi/libstub/file.c +++ b/drivers/firmware/efi/libstub/file.c @@ -102,12 +102,20 @@ static int find_file_option(const efi_char16_t *cmdline, int cmdline_len, if (!found) return 0; + /* Skip any leading slashes */ + while (cmdline[i] == L'/' || cmdline[i] == L'\\') + i++; + while (--result_len > 0 && i < cmdline_len) { - if (cmdline[i] == L'\0' || - cmdline[i] == L'\n' || - cmdline[i] == L' ') + efi_char16_t c = cmdline[i++]; + + if (c == L'\0' || c == L'\n' || c == L' ') break; - *result++ = cmdline[i++]; + else if (c == L'/') + /* Replace UNIX dir separators with EFI standard ones */ + *result++ = L'\\'; + else + *result++ = c; } *result = L'\0'; return i; From 4f5747cf8e5947479a27a3597829e45d6d8d73e0 Mon Sep 17 00:00:00 2001 From: Tom Seewald Date: Thu, 4 Jun 2020 21:30:12 -0500 Subject: [PATCH 084/618] RDMA/mlx5: Fix -Wformat warning in check_ucmd_data() Variables of type size_t should use %zu rather than %lu [1]. The variables "inlen", "ucmd", "last", and "size" are all size_t, so use the correct format specifiers. [1] https://www.kernel.org/doc/html/latest/core-api/printk-formats.html Fixes: e383085c2425 ("RDMA/mlx5: Set ECE options during QP create") Link: https://lore.kernel.org/r/20200605023012.9527-1-tseewald@gmail.com Signed-off-by: Tom Seewald Acked-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/qp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index d61ca85033de..dbe82cdb8d2c 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -2907,7 +2907,7 @@ static int check_ucmd_data(struct mlx5_ib_dev *dev, if (!ret) mlx5_ib_dbg( dev, - "udata is not cleared, inlen = %lu, ucmd = %lu, last = %lu, size = %lu\n", + "udata is not cleared, inlen = %zu, ucmd = %zu, last = %zu, size = %zu\n", udata->inlen, params->ucmd_size, last, size); return ret ? 0 : -EINVAL; } From 0dc63bbee0fa6da20283ae6e22e99c6fde25ed8e Mon Sep 17 00:00:00 2001 From: Kieran Bingham Date: Tue, 9 Jun 2020 13:45:55 +0100 Subject: [PATCH 085/618] RDMA/hfi1: Fix trivial mis-spelling of 'descriptor' The word 'descriptor' is misspelled throughout the tree. Fix it up accordingly: decriptors -> descriptors Link: https://lore.kernel.org/r/20200609124610.3445662-3-kieran.bingham+renesas@ideasonboard.com Link: https://lore.kernel.org/r/20200609124610.3445662-12-kieran.bingham+renesas@ideasonboard.com Signed-off-by: Kieran Bingham Acked-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hfi1/iowait.h | 2 +- drivers/infiniband/hw/hfi1/ipoib_tx.c | 2 +- drivers/infiniband/hw/hfi1/verbs_txreq.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/iowait.h b/drivers/infiniband/hw/hfi1/iowait.h index 07847cb72169..d580aa17ae37 100644 --- a/drivers/infiniband/hw/hfi1/iowait.h +++ b/drivers/infiniband/hw/hfi1/iowait.h @@ -399,7 +399,7 @@ static inline void iowait_get_priority(struct iowait *w) * @wait_head: the wait queue * * This function is called to insert an iowait struct into a - * wait queue after a resource (eg, sdma decriptor or pio + * wait queue after a resource (eg, sdma descriptor or pio * buffer) is run out. */ static inline void iowait_queue(bool pkts_sent, struct iowait *w, diff --git a/drivers/infiniband/hw/hfi1/ipoib_tx.c b/drivers/infiniband/hw/hfi1/ipoib_tx.c index 883cb9d48022..175290c56db9 100644 --- a/drivers/infiniband/hw/hfi1/ipoib_tx.c +++ b/drivers/infiniband/hw/hfi1/ipoib_tx.c @@ -364,7 +364,7 @@ static struct ipoib_txreq *hfi1_ipoib_send_dma_common(struct net_device *dev, if (unlikely(!tx)) return ERR_PTR(-ENOMEM); - /* so that we can test if the sdma decriptors are there */ + /* so that we can test if the sdma descriptors are there */ tx->txreq.num_desc = 0; tx->priv = priv; tx->txq = txp->txq; diff --git a/drivers/infiniband/hw/hfi1/verbs_txreq.h b/drivers/infiniband/hw/hfi1/verbs_txreq.h index bfa6e081cb56..d2d526c5a756 100644 --- a/drivers/infiniband/hw/hfi1/verbs_txreq.h +++ b/drivers/infiniband/hw/hfi1/verbs_txreq.h @@ -91,7 +91,7 @@ static inline struct verbs_txreq *get_txreq(struct hfi1_ibdev *dev, tx->mr = NULL; tx->sde = priv->s_sde; tx->psc = priv->s_sendcontext; - /* so that we can test if the sdma decriptors are there */ + /* so that we can test if the sdma descriptors are there */ tx->txreq.num_desc = 0; /* Set the header type */ tx->phdr.hdr.hdr_type = priv->hdr_type; From 6769b275a313c76ddcd7d94c632032326db5f759 Mon Sep 17 00:00:00 2001 From: Tom Seewald Date: Wed, 10 Jun 2020 12:47:17 -0500 Subject: [PATCH 086/618] RDMA/siw: Fix pointer-to-int-cast warning in siw_rx_pbl() The variable buf_addr is type dma_addr_t, which may not be the same size as a pointer. To ensure it is the correct size, cast to a uintptr_t. Fixes: c536277e0db1 ("RDMA/siw: Fix 64/32bit pointer inconsistency") Link: https://lore.kernel.org/r/20200610174717.15932-1-tseewald@gmail.com Signed-off-by: Tom Seewald Reviewed-by: Bernard Metzler Signed-off-by: Jason Gunthorpe --- drivers/infiniband/sw/siw/siw_qp_rx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/sw/siw/siw_qp_rx.c b/drivers/infiniband/sw/siw/siw_qp_rx.c index 650520244ed0..7271d705f4b0 100644 --- a/drivers/infiniband/sw/siw/siw_qp_rx.c +++ b/drivers/infiniband/sw/siw/siw_qp_rx.c @@ -139,7 +139,8 @@ static int siw_rx_pbl(struct siw_rx_stream *srx, int *pbl_idx, break; bytes = min(bytes, len); - if (siw_rx_kva(srx, (void *)buf_addr, bytes) == bytes) { + if (siw_rx_kva(srx, (void *)(uintptr_t)buf_addr, bytes) == + bytes) { copied += bytes; offset += bytes; len -= bytes; From b0659d8a950d424e57cc0a67afc4740ee561224e Mon Sep 17 00:00:00 2001 From: Andrii Nakryiko Date: Mon, 15 Jun 2020 14:49:26 -0700 Subject: [PATCH 087/618] bpf: Fix definition of bpf_ringbuf_output() helper in UAPI comments Fix definition of bpf_ringbuf_output() in UAPI header comments, which is used to generate libbpf's bpf_helper_defs.h header. Return value is a number (error code), not a pointer. Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it") Signed-off-by: Andrii Nakryiko Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20200615214926.3638836-1-andriin@fb.com --- include/uapi/linux/bpf.h | 2 +- tools/include/uapi/linux/bpf.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 19684813faae..974a71342aea 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -3168,7 +3168,7 @@ union bpf_attr { * Return * The id is returned or 0 in case the id could not be retrieved. * - * void *bpf_ringbuf_output(void *ringbuf, void *data, u64 size, u64 flags) + * int bpf_ringbuf_output(void *ringbuf, void *data, u64 size, u64 flags) * Description * Copy *size* bytes from *data* into a ring buffer *ringbuf*. * If BPF_RB_NO_WAKEUP is specified in *flags*, no notification of diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index 19684813faae..974a71342aea 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -3168,7 +3168,7 @@ union bpf_attr { * Return * The id is returned or 0 in case the id could not be retrieved. * - * void *bpf_ringbuf_output(void *ringbuf, void *data, u64 size, u64 flags) + * int bpf_ringbuf_output(void *ringbuf, void *data, u64 size, u64 flags) * Description * Copy *size* bytes from *data* into a ring buffer *ringbuf*. * If BPF_RB_NO_WAKEUP is specified in *flags*, no notification of From c34a06c56df7c513cd19f591b26fe7d814c778cc Mon Sep 17 00:00:00 2001 From: Andrii Nakryiko Date: Mon, 15 Jun 2020 15:53:55 -0700 Subject: [PATCH 088/618] tools/bpftool: Add ringbuf map to a list of known map types Add symbolic name "ringbuf" to map to BPF_MAP_TYPE_RINGBUF. Without this, users will see "type 27" instead of "ringbuf" in `map show` output. Signed-off-by: Andrii Nakryiko Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20200615225355.366256-1-andriin@fb.com --- tools/bpf/bpftool/map.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/bpf/bpftool/map.c b/tools/bpf/bpftool/map.c index c5fac8068ba1..99109a6afe17 100644 --- a/tools/bpf/bpftool/map.c +++ b/tools/bpf/bpftool/map.c @@ -49,6 +49,7 @@ const char * const map_type_name[] = { [BPF_MAP_TYPE_STACK] = "stack", [BPF_MAP_TYPE_SK_STORAGE] = "sk_storage", [BPF_MAP_TYPE_STRUCT_OPS] = "struct_ops", + [BPF_MAP_TYPE_RINGBUF] = "ringbuf", }; const size_t map_type_name_size = ARRAY_SIZE(map_type_name); From b9dbe0101e344e8339406a11b7a91d4a0c50ad13 Mon Sep 17 00:00:00 2001 From: Matthew Hagan Date: Tue, 9 Jun 2020 17:58:29 +0100 Subject: [PATCH 089/618] ARM: dts: NSP: Disable PL330 by default, add dma-coherent property Currently the PL330 is enabled by default. However if left in IDM reset, as is the case with the Meraki and Synology NSP devices, the system will hang when probing for the PL330's AMBA peripheral ID. We therefore should be able to disable it in these cases. The PL330 is also included among of the list of peripherals put into coherent mode, so "dma-coherent" has been added here as well. Fixes: 5fa1026a3e4d ("ARM: dts: NSP: Add PL330 support") Signed-off-by: Matthew Hagan Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-nsp.dtsi | 4 +++- arch/arm/boot/dts/bcm958522er.dts | 4 ++++ arch/arm/boot/dts/bcm958525er.dts | 4 ++++ arch/arm/boot/dts/bcm958525xmc.dts | 4 ++++ arch/arm/boot/dts/bcm958622hr.dts | 4 ++++ arch/arm/boot/dts/bcm958623hr.dts | 4 ++++ arch/arm/boot/dts/bcm958625hr.dts | 4 ++++ arch/arm/boot/dts/bcm958625k.dts | 4 ++++ 8 files changed, 31 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index da6d70f09ef1..920c0f561e5c 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -200,7 +200,7 @@ uart1: serial@400 { status = "disabled"; }; - dma@20000 { + dma: dma@20000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x20000 0x1000>; interrupts = , @@ -215,6 +215,8 @@ dma@20000 { clocks = <&iprocslow>; clock-names = "apb_pclk"; #dma-cells = <1>; + dma-coherent; + status = "disabled"; }; sdio: sdhci@21000 { diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index 8c388eb8a08f..7be4c4e628e0 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -58,6 +58,10 @@ gpio-restart { /* USB 3 support needed to be complete */ +&dma { + status = "okay"; +}; + &amac0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index c339771bb22e..e58ed7e95346 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -58,6 +58,10 @@ gpio-restart { /* USB 3 support needed to be complete */ +&dma { + status = "okay"; +}; + &amac0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index 1c72ec8288de..716da62f5788 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -58,6 +58,10 @@ gpio-restart { /* XHCI support needed to be complete */ +&dma { + status = "okay"; +}; + &amac0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index 96a021cebd97..a49c2fd21f4a 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -58,6 +58,10 @@ gpio-restart { /* USB 3 and SLIC support needed to be complete */ +&dma { + status = "okay"; +}; + &amac0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index b2c7f21d471e..dd6dff6452b8 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -58,6 +58,10 @@ gpio-restart { /* USB 3 and SLIC support needed to be complete */ +&dma { + status = "okay"; +}; + &amac0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index 536fb24f38bb..a71371b4065e 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -69,6 +69,10 @@ &i2c0 { status = "okay"; }; +&dma { + status = "okay"; +}; + &amac0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 3fcca12d83c2..7b84b54436ed 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -48,6 +48,10 @@ memory@60000000 { }; }; +&dma { + status = "okay"; +}; + &amac0 { status = "okay"; }; From cf5057e169f460e825bdf580eb285bb601156f82 Mon Sep 17 00:00:00 2001 From: Jens Wiklander Date: Mon, 15 Jun 2020 15:02:42 +0200 Subject: [PATCH 090/618] MAINTAINERS: change tee mailing list The old TEE mailing list tee-dev@lists.linaro.org is about to be retired. From now on please use op-tee@lists.trustedfirmware.org instead. Acked-by: Sumit Garg Signed-off-by: Jens Wiklander --- MAINTAINERS | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 68f21d46614c..772448e36203 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12691,13 +12691,13 @@ F: arch/mips/boot/dts/ralink/omega2p.dts OP-TEE DRIVER M: Jens Wiklander -L: tee-dev@lists.linaro.org +L: op-tee@lists.trustedfirmware.org S: Maintained F: drivers/tee/optee/ OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER M: Sumit Garg -L: tee-dev@lists.linaro.org +L: op-tee@lists.trustedfirmware.org S: Maintained F: drivers/char/hw_random/optee-rng.c @@ -16759,7 +16759,7 @@ F: include/media/i2c/tw9910.h TEE SUBSYSTEM M: Jens Wiklander -L: tee-dev@lists.linaro.org +L: op-tee@lists.trustedfirmware.org S: Maintained F: Documentation/tee.txt F: drivers/tee/ From e9c15badbb7b20ccdbadf5da14e0a68fbad51015 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Mon, 15 Jun 2020 13:13:58 +0100 Subject: [PATCH 091/618] fs: Do not check if there is a fsnotify watcher on pseudo inodes The kernel uses internal mounts created by kern_mount() and populated with files with no lookup path by alloc_file_pseudo() for a variety of reasons. An example of such a mount is for anonymous pipes. For pipes, every vfs_write() regardless of filesystem, calls fsnotify_modify() to notify of any changes which incurs a small amount of overhead in fsnotify even when there are no watchers. It can also trigger for reads and readv and writev, it was simply vfs_write() that was noticed first. A patch is pending that reduces, but does not eliminate, the overhead of fsnotify but for files that cannot be looked up via a path, even that small overhead is unnecessary. The user API for all notification subsystems (inotify, fanotify, ...) is based on the pathname and a dirfd and proc entries appear to be the only visible representation of the files. Proc does not have the same pathname as the internal entry and the proc inode is not the same as the internal inode so even if fanotify is used on a file under /proc/XX/fd, no useful events are notified. This patch changes alloc_file_pseudo() to always opt out of fsnotify by setting FMODE_NONOTIFY flag so that no check is made for fsnotify watchers on pseudo files. This should be safe as the underlying helper for the dentry is d_alloc_pseudo() which explicitly states that no lookups are ever performed meaning that fanotify should have nothing useful to attach to. The test motivating this was "perf bench sched messaging --pipe". On a single-socket machine using threads the difference of the patch was as follows. 5.7.0 5.7.0 vanilla nofsnotify-v1r1 Amean 1 1.3837 ( 0.00%) 1.3547 ( 2.10%) Amean 3 3.7360 ( 0.00%) 3.6543 ( 2.19%) Amean 5 5.8130 ( 0.00%) 5.7233 * 1.54%* Amean 7 8.1490 ( 0.00%) 7.9730 * 2.16%* Amean 12 14.6843 ( 0.00%) 14.1820 ( 3.42%) Amean 18 21.8840 ( 0.00%) 21.7460 ( 0.63%) Amean 24 28.8697 ( 0.00%) 29.1680 ( -1.03%) Amean 30 36.0787 ( 0.00%) 35.2640 * 2.26%* Amean 32 38.0527 ( 0.00%) 38.1223 ( -0.18%) The difference is small but in some cases it's outside the noise so while marginal, there is still some small benefit to ignoring fsnotify for files allocated via alloc_file_pseudo() in some cases. Link: https://lore.kernel.org/r/20200615121358.GF3183@techsingularity.net Signed-off-by: Mel Gorman Reviewed-by: Amir Goldstein Signed-off-by: Jan Kara --- fs/file_table.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/file_table.c b/fs/file_table.c index 656647f9575a..65603502fed6 100644 --- a/fs/file_table.c +++ b/fs/file_table.c @@ -230,7 +230,7 @@ struct file *alloc_file_pseudo(struct inode *inode, struct vfsmount *mnt, d_set_d_op(path.dentry, &anon_ops); path.mnt = mntget(mnt); d_instantiate(path.dentry, inode); - file = alloc_file(&path, flags, fops); + file = alloc_file(&path, flags | FMODE_NONOTIFY, fops); if (IS_ERR(file)) { ihold(inode); path_put(&path); From 8c0a839c2bccb756454e35e8977e44fcf2bd417e Mon Sep 17 00:00:00 2001 From: Heinrich Schuchardt Date: Tue, 16 Jun 2020 01:42:31 +0200 Subject: [PATCH 092/618] efi/libstub: Descriptions for stub helper functions Provide missing descriptions for EFI stub helper functions. Adjust formatting of existing descriptions to kernel style. Signed-off-by: Heinrich Schuchardt Link: https://lore.kernel.org/r/20200615234231.21059-1-xypron.glpk@gmx.de Signed-off-by: Ard Biesheuvel --- .../firmware/efi/libstub/efi-stub-helper.c | 78 ++++++++++++++++--- drivers/firmware/efi/libstub/efistub.h | 10 ++- 2 files changed, 75 insertions(+), 13 deletions(-) diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c index 89f075275300..d40fd68c6bb2 100644 --- a/drivers/firmware/efi/libstub/efi-stub-helper.c +++ b/drivers/firmware/efi/libstub/efi-stub-helper.c @@ -32,6 +32,10 @@ bool __pure __efi_soft_reserve_enabled(void) return !efi_nosoftreserve; } +/** + * efi_char16_puts() - Write a UCS-2 encoded string to the console + * @str: UCS-2 encoded string + */ void efi_char16_puts(efi_char16_t *str) { efi_call_proto(efi_table_attr(efi_system_table, con_out), @@ -83,6 +87,10 @@ u32 utf8_to_utf32(const u8 **s8) return c32; } +/** + * efi_puts() - Write a UTF-8 encoded string to the console + * @str: UTF-8 encoded string + */ void efi_puts(const char *str) { efi_char16_t buf[128]; @@ -113,6 +121,16 @@ void efi_puts(const char *str) } } +/** + * efi_printk() - Print a kernel message + * @fmt: format string + * + * The first letter of the format string is used to determine the logging level + * of the message. If the level is less then the current EFI logging level, the + * message is suppressed. The message will be truncated to 255 bytes. + * + * Return: number of printed characters + */ int efi_printk(const char *fmt, ...) { char printf_buf[256]; @@ -154,13 +172,18 @@ int efi_printk(const char *fmt, ...) return printed; } -/* - * Parse the ASCII string 'cmdline' for EFI options, denoted by the efi= +/** + * efi_parse_options() - Parse EFI command line options + * @cmdline: kernel command line + * + * Parse the ASCII string @cmdline for EFI options, denoted by the efi= * option, e.g. efi=nochunk. * * It should be noted that efi= is parsed in two very different * environments, first in the early boot environment of the EFI boot * stub, and subsequently during the kernel boot. + * + * Return: status code */ efi_status_t efi_parse_options(char const *cmdline) { @@ -286,13 +309,21 @@ char *efi_convert_cmdline(efi_loaded_image_t *image, int *cmd_line_len) return (char *)cmdline_addr; } -/* +/** + * efi_exit_boot_services() - Exit boot services + * @handle: handle of the exiting image + * @map: pointer to receive the memory map + * @priv: argument to be passed to @priv_func + * @priv_func: function to process the memory map before exiting boot services + * * Handle calling ExitBootServices according to the requirements set out by the * spec. Obtains the current memory map, and returns that info after calling * ExitBootServices. The client must specify a function to perform any * processing of the memory map data prior to ExitBootServices. A client * specific structure may be passed to the function via priv. The client * function may be called multiple times. + * + * Return: status code */ efi_status_t efi_exit_boot_services(void *handle, struct efi_boot_memmap *map, @@ -361,6 +392,11 @@ efi_status_t efi_exit_boot_services(void *handle, return status; } +/** + * get_efi_config_table() - retrieve UEFI configuration table + * @guid: GUID of the configuration table to be retrieved + * Return: pointer to the configuration table or NULL + */ void *get_efi_config_table(efi_guid_t guid) { unsigned long tables = efi_table_attr(efi_system_table, tables); @@ -408,17 +444,18 @@ static const struct { }; /** - * efi_load_initrd_dev_path - load the initrd from the Linux initrd device path + * efi_load_initrd_dev_path() - load the initrd from the Linux initrd device path * @load_addr: pointer to store the address where the initrd was loaded * @load_size: pointer to store the size of the loaded initrd * @max: upper limit for the initrd memory allocation - * @return: %EFI_SUCCESS if the initrd was loaded successfully, in which - * case @load_addr and @load_size are assigned accordingly - * %EFI_NOT_FOUND if no LoadFile2 protocol exists on the initrd - * device path - * %EFI_INVALID_PARAMETER if load_addr == NULL or load_size == NULL - * %EFI_OUT_OF_RESOURCES if memory allocation failed - * %EFI_LOAD_ERROR in all other cases + * + * Return: + * * %EFI_SUCCESS if the initrd was loaded successfully, in which + * case @load_addr and @load_size are assigned accordingly + * * %EFI_NOT_FOUND if no LoadFile2 protocol exists on the initrd device path + * * %EFI_INVALID_PARAMETER if load_addr == NULL or load_size == NULL + * * %EFI_OUT_OF_RESOURCES if memory allocation failed + * * %EFI_LOAD_ERROR in all other cases */ static efi_status_t efi_load_initrd_dev_path(unsigned long *load_addr, @@ -481,6 +518,16 @@ efi_status_t efi_load_initrd_cmdline(efi_loaded_image_t *image, load_addr, load_size); } +/** + * efi_load_initrd() - Load initial RAM disk + * @image: EFI loaded image protocol + * @load_addr: pointer to loaded initrd + * @load_size: size of loaded initrd + * @soft_limit: preferred size of allocated memory for loading the initrd + * @hard_limit: minimum size of allocated memory + * + * Return: status code + */ efi_status_t efi_load_initrd(efi_loaded_image_t *image, unsigned long *load_addr, unsigned long *load_size, @@ -505,6 +552,15 @@ efi_status_t efi_load_initrd(efi_loaded_image_t *image, return status; } +/** + * efi_wait_for_key() - Wait for key stroke + * @usec: number of microseconds to wait for key stroke + * @key: key entered + * + * Wait for up to @usec microseconds for a key stroke. + * + * Return: status code, EFI_SUCCESS if key received + */ efi_status_t efi_wait_for_key(unsigned long usec, efi_input_key_t *key) { efi_event_t events[2], timer; diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h index bcd8c0a785f0..ac756f1fdb1a 100644 --- a/drivers/firmware/efi/libstub/efistub.h +++ b/drivers/firmware/efi/libstub/efistub.h @@ -157,8 +157,14 @@ typedef void (__efiapi *efi_event_notify_t)(efi_event_t, void *); #define EFI_EVT_NOTIFY_WAIT 0x00000100U #define EFI_EVT_NOTIFY_SIGNAL 0x00000200U -/* - * boottime->wait_for_event takes an array of events as input. +/** + * efi_set_event_at() - add event to events array + * + * @events: array of UEFI events + * @ids: index where to put the event in the array + * @event: event to add to the aray + * + * boottime->wait_for_event() takes an array of events as input. * Provide a helper to set it up correctly for mixed mode. */ static inline From 435d1a471598752446a72ad1201b3c980526d869 Mon Sep 17 00:00:00 2001 From: Peter Jones Date: Mon, 15 Jun 2020 16:24:08 -0400 Subject: [PATCH 093/618] efi: Make it possible to disable efivar_ssdt entirely In most cases, such as CONFIG_ACPI_CUSTOM_DSDT and CONFIG_ACPI_TABLE_UPGRADE, boot-time modifications to firmware tables are tied to specific Kconfig options. Currently this is not the case for modifying the ACPI SSDT via the efivar_ssdt kernel command line option and associated EFI variable. This patch adds CONFIG_EFI_CUSTOM_SSDT_OVERLAYS, which defaults disabled, in order to allow enabling or disabling that feature during the build. Cc: Signed-off-by: Peter Jones Link: https://lore.kernel.org/r/20200615202408.2242614-1-pjones@redhat.com Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/Kconfig | 11 +++++++++++ drivers/firmware/efi/efi.c | 2 +- 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig index e6fc022bc87e..3939699e62fe 100644 --- a/drivers/firmware/efi/Kconfig +++ b/drivers/firmware/efi/Kconfig @@ -278,3 +278,14 @@ config EFI_EARLYCON depends on SERIAL_EARLYCON && !ARM && !IA64 select FONT_SUPPORT select ARCH_USE_MEMREMAP_PROT + +config EFI_CUSTOM_SSDT_OVERLAYS + bool "Load custom ACPI SSDT overlay from an EFI variable" + depends on EFI_VARS && ACPI + default ACPI_TABLE_UPGRADE + help + Allow loading of an ACPI SSDT overlay from an EFI variable specified + by a kernel command line option. + + See Documentation/admin-guide/acpi/ssdt-overlays.rst for more + information. diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c index edc5d36caf54..5114cae4ec97 100644 --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -189,7 +189,7 @@ static void generic_ops_unregister(void) efivars_unregister(&generic_efivars); } -#if IS_ENABLED(CONFIG_ACPI) +#ifdef CONFIG_EFI_CUSTOM_SSDT_OVERLAYS #define EFIVAR_SSDT_NAME_MAX 16 static char efivar_ssdt[EFIVAR_SSDT_NAME_MAX] __initdata; static int __init efivar_ssdt_setup(char *str) From ed1220df6e666500ebf58c4f2fccc681941646fb Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Tue, 16 Jun 2020 10:53:48 +0800 Subject: [PATCH 094/618] ASoC: fsl_ssi: Fix bclk calculation for mono channel For mono channel, SSI will switch to Normal mode. In Normal mode and Network mode, the Word Length Control bits control the word length divider in clock generator, which is different with I2S Master mode (the word length is fixed to 32bit), it should be the value of params_width(hw_params). The condition "slots == 2" is not good for I2S Master mode, because for Network mode and Normal mode, the slots can also be 2. Then we need to use (ssi->i2s_net & SSI_SCR_I2S_MODE_MASK) to check if it is I2S Master mode. So we refine the formula for mono channel, otherwise there will be sound issue for S24_LE. Fixes: b0a7043d5c2c ("ASoC: fsl_ssi: Caculate bit clock rate using slot number and width") Signed-off-by: Shengjiu Wang Reviewed-by: Nicolin Chen Link: https://lore.kernel.org/r/034eff1435ff6ce300b6c781130cefd9db22ab9a.1592276147.git.shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_ssi.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index bad89b0d129e..1a2fa7f18142 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -678,8 +678,9 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, struct regmap *regs = ssi->regs; u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i; unsigned long clkrate, baudrate, tmprate; - unsigned int slots = params_channels(hw_params); - unsigned int slot_width = 32; + unsigned int channels = params_channels(hw_params); + unsigned int slot_width = params_width(hw_params); + unsigned int slots = 2; u64 sub, savesub = 100000; unsigned int freq; bool baudclk_is_used; @@ -688,10 +689,14 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, /* Override slots and slot_width if being specifically set... */ if (ssi->slots) slots = ssi->slots; - /* ...but keep 32 bits if slots is 2 -- I2S Master mode */ - if (ssi->slot_width && slots != 2) + if (ssi->slot_width) slot_width = ssi->slot_width; + /* ...but force 32 bits for stereo audio using I2S Master Mode */ + if (channels == 2 && + (ssi->i2s_net & SSI_SCR_I2S_MODE_MASK) == SSI_SCR_I2S_MODE_MASTER) + slot_width = 32; + /* Generate bit clock based on the slot number and slot width */ freq = slots * slot_width * params_rate(hw_params); From 109be8b23fb2ec8e2d309325ee3b7a49eab63961 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 26 Apr 2020 21:16:30 +0200 Subject: [PATCH 095/618] gpu: host1x: Clean up debugfs in error handling path host1x_debug_init() must be reverted in an error handling path. This is already fixed in the remove function since commit 44156eee91ba ("gpu: host1x: Clean up debugfs on removal") Signed-off-by: Christophe JAILLET Signed-off-by: Thierry Reding --- drivers/gpu/host1x/dev.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/host1x/dev.c b/drivers/gpu/host1x/dev.c index d24344e91922..3c0f151847ba 100644 --- a/drivers/gpu/host1x/dev.c +++ b/drivers/gpu/host1x/dev.c @@ -468,11 +468,12 @@ static int host1x_probe(struct platform_device *pdev) err = host1x_register(host); if (err < 0) - goto deinit_intr; + goto deinit_debugfs; return 0; -deinit_intr: +deinit_debugfs: + host1x_debug_deinit(host); host1x_intr_deinit(host); deinit_syncpt: host1x_syncpt_deinit(host); From ef4e417eb3ec7fe657928f10ac1d2154d8a5fb38 Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Tue, 19 May 2020 02:03:01 -0700 Subject: [PATCH 096/618] drm/tegra: hub: Do not enable orphaned window group Though the unconditional enable/disable code is not a final solution, we don't want to run into a NULL pointer situation when window group doesn't link to its DC parent if the DC is disabled in Device Tree. So this patch simply adds a check to make sure that window group has a valid parent before running into tegra_windowgroup_enable/disable. Signed-off-by: Nicolin Chen Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/hub.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/tegra/hub.c b/drivers/gpu/drm/tegra/hub.c index 8183e617bf6b..a2ef8f218d4e 100644 --- a/drivers/gpu/drm/tegra/hub.c +++ b/drivers/gpu/drm/tegra/hub.c @@ -149,7 +149,9 @@ int tegra_display_hub_prepare(struct tegra_display_hub *hub) for (i = 0; i < hub->soc->num_wgrps; i++) { struct tegra_windowgroup *wgrp = &hub->wgrps[i]; - tegra_windowgroup_enable(wgrp); + /* Skip orphaned window group whose parent DC is disabled */ + if (wgrp->parent) + tegra_windowgroup_enable(wgrp); } return 0; @@ -166,7 +168,9 @@ void tegra_display_hub_cleanup(struct tegra_display_hub *hub) for (i = 0; i < hub->soc->num_wgrps; i++) { struct tegra_windowgroup *wgrp = &hub->wgrps[i]; - tegra_windowgroup_disable(wgrp); + /* Skip orphaned window group whose parent DC is disabled */ + if (wgrp->parent) + tegra_windowgroup_disable(wgrp); } } From ca2030d56bb7b73079f834b10de38ced9cac74a3 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 17:00:59 +0200 Subject: [PATCH 097/618] gpu: host1x: Register child devices In order to remove the dependency on the simple-bus compatible string, which causes the OF driver core to register all child devices, make the host1x driver explicitly register its children. Signed-off-by: Thierry Reding --- drivers/gpu/host1x/dev.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/host1x/dev.c b/drivers/gpu/host1x/dev.c index 3c0f151847ba..d0ebb70e2fdd 100644 --- a/drivers/gpu/host1x/dev.c +++ b/drivers/gpu/host1x/dev.c @@ -470,8 +470,14 @@ static int host1x_probe(struct platform_device *pdev) if (err < 0) goto deinit_debugfs; + err = devm_of_platform_populate(&pdev->dev); + if (err < 0) + goto unregister; + return 0; +unregister: + host1x_unregister(host); deinit_debugfs: host1x_debug_deinit(host); host1x_intr_deinit(host); From a101e3dad8a90a840ccb45e492cd2ef7c01199ea Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 17:01:00 +0200 Subject: [PATCH 098/618] drm/tegra: hub: Register child devices In order to remove the dependency on the simple-bus compatible string, which causes the OF driver core to register all child devices, make the display-hub driver explicitly register the display controller children. Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/hub.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/tegra/hub.c b/drivers/gpu/drm/tegra/hub.c index a2ef8f218d4e..22a03f7ffdc1 100644 --- a/drivers/gpu/drm/tegra/hub.c +++ b/drivers/gpu/drm/tegra/hub.c @@ -948,6 +948,15 @@ static int tegra_display_hub_probe(struct platform_device *pdev) dev_err(&pdev->dev, "failed to register host1x client: %d\n", err); + err = devm_of_platform_populate(&pdev->dev); + if (err < 0) + goto unregister; + + return err; + +unregister: + host1x_client_unregister(&hub->client); + pm_runtime_disable(&pdev->dev); return err; } From 6903cdae9f9f08d61e49c16cbef11c293e33a615 Mon Sep 17 00:00:00 2001 From: Gaurav Singh Date: Fri, 12 Jun 2020 14:53:27 -0400 Subject: [PATCH 099/618] bpf, xdp, samples: Fix null pointer dereference in *_user code Memset on the pointer right after malloc can cause a NULL pointer deference if it failed to allocate memory. A simple fix is to replace malloc()/memset() pair with a simple call to calloc(). Fixes: 0fca931a6f21 ("samples/bpf: program demonstrating access to xdp_rxq_info") Signed-off-by: Gaurav Singh Signed-off-by: Daniel Borkmann Acked-by: Jesper Dangaard Brouer Acked-by: John Fastabend --- samples/bpf/xdp_monitor_user.c | 8 ++------ samples/bpf/xdp_redirect_cpu_user.c | 7 ++----- samples/bpf/xdp_rxq_info_user.c | 13 +++---------- 3 files changed, 7 insertions(+), 21 deletions(-) diff --git a/samples/bpf/xdp_monitor_user.c b/samples/bpf/xdp_monitor_user.c index dd558cbb2309..ef53b93db573 100644 --- a/samples/bpf/xdp_monitor_user.c +++ b/samples/bpf/xdp_monitor_user.c @@ -509,11 +509,8 @@ static void *alloc_rec_per_cpu(int record_size) { unsigned int nr_cpus = bpf_num_possible_cpus(); void *array; - size_t size; - size = record_size * nr_cpus; - array = malloc(size); - memset(array, 0, size); + array = calloc(nr_cpus, record_size); if (!array) { fprintf(stderr, "Mem alloc error (nr_cpus:%u)\n", nr_cpus); exit(EXIT_FAIL_MEM); @@ -528,8 +525,7 @@ static struct stats_record *alloc_stats_record(void) int i; /* Alloc main stats_record structure */ - rec = malloc(sizeof(*rec)); - memset(rec, 0, sizeof(*rec)); + rec = calloc(1, sizeof(*rec)); if (!rec) { fprintf(stderr, "Mem alloc error\n"); exit(EXIT_FAIL_MEM); diff --git a/samples/bpf/xdp_redirect_cpu_user.c b/samples/bpf/xdp_redirect_cpu_user.c index f3468168982e..f4e755e0dd73 100644 --- a/samples/bpf/xdp_redirect_cpu_user.c +++ b/samples/bpf/xdp_redirect_cpu_user.c @@ -207,11 +207,8 @@ static struct datarec *alloc_record_per_cpu(void) { unsigned int nr_cpus = bpf_num_possible_cpus(); struct datarec *array; - size_t size; - size = sizeof(struct datarec) * nr_cpus; - array = malloc(size); - memset(array, 0, size); + array = calloc(nr_cpus, sizeof(struct datarec)); if (!array) { fprintf(stderr, "Mem alloc error (nr_cpus:%u)\n", nr_cpus); exit(EXIT_FAIL_MEM); @@ -226,11 +223,11 @@ static struct stats_record *alloc_stats_record(void) size = sizeof(*rec) + n_cpus * sizeof(struct record); rec = malloc(size); - memset(rec, 0, size); if (!rec) { fprintf(stderr, "Mem alloc error\n"); exit(EXIT_FAIL_MEM); } + memset(rec, 0, size); rec->rx_cnt.cpu = alloc_record_per_cpu(); rec->redir_err.cpu = alloc_record_per_cpu(); rec->kthread.cpu = alloc_record_per_cpu(); diff --git a/samples/bpf/xdp_rxq_info_user.c b/samples/bpf/xdp_rxq_info_user.c index 4fe47502ebed..caa4e7ffcfc7 100644 --- a/samples/bpf/xdp_rxq_info_user.c +++ b/samples/bpf/xdp_rxq_info_user.c @@ -198,11 +198,8 @@ static struct datarec *alloc_record_per_cpu(void) { unsigned int nr_cpus = bpf_num_possible_cpus(); struct datarec *array; - size_t size; - size = sizeof(struct datarec) * nr_cpus; - array = malloc(size); - memset(array, 0, size); + array = calloc(nr_cpus, sizeof(struct datarec)); if (!array) { fprintf(stderr, "Mem alloc error (nr_cpus:%u)\n", nr_cpus); exit(EXIT_FAIL_MEM); @@ -214,11 +211,8 @@ static struct record *alloc_record_per_rxq(void) { unsigned int nr_rxqs = bpf_map__def(rx_queue_index_map)->max_entries; struct record *array; - size_t size; - size = sizeof(struct record) * nr_rxqs; - array = malloc(size); - memset(array, 0, size); + array = calloc(nr_rxqs, sizeof(struct record)); if (!array) { fprintf(stderr, "Mem alloc error (nr_rxqs:%u)\n", nr_rxqs); exit(EXIT_FAIL_MEM); @@ -232,8 +226,7 @@ static struct stats_record *alloc_stats_record(void) struct stats_record *rec; int i; - rec = malloc(sizeof(*rec)); - memset(rec, 0, sizeof(*rec)); + rec = calloc(1, sizeof(struct stats_record)); if (!rec) { fprintf(stderr, "Mem alloc error\n"); exit(EXIT_FAIL_MEM); From 33aea07f30c261eff7ba229f19fd1b161e0fb851 Mon Sep 17 00:00:00 2001 From: Marco Elver Date: Tue, 16 Jun 2020 01:15:29 +0200 Subject: [PATCH 100/618] compiler_attributes.h: Support no_sanitize_undefined check with GCC 4 UBSAN is supported since GCC 4.9, which unfortunately did not yet have __has_attribute(). To work around, the __GCC4_has_attribute workaround requires defining which compiler version supports the given attribute. In the case of no_sanitize_undefined, it is the first version that supports UBSAN, which is GCC 4.9. Reported-by: kernel test robot Signed-off-by: Marco Elver Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Miguel Ojeda Link: https://lkml.kernel.org/r/20200615231529.GA119644@google.com --- include/linux/compiler_attributes.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/compiler_attributes.h b/include/linux/compiler_attributes.h index cdf016596659..c8f03d2969df 100644 --- a/include/linux/compiler_attributes.h +++ b/include/linux/compiler_attributes.h @@ -40,6 +40,7 @@ # define __GCC4_has_attribute___noclone__ 1 # define __GCC4_has_attribute___nonstring__ 0 # define __GCC4_has_attribute___no_sanitize_address__ (__GNUC_MINOR__ >= 8) +# define __GCC4_has_attribute___no_sanitize_undefined__ (__GNUC_MINOR__ >= 9) # define __GCC4_has_attribute___fallthrough__ 0 #endif From a0b03952a797591d4b6d6fa7b9b7872e27783729 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 16 Jun 2020 15:21:50 +0200 Subject: [PATCH 101/618] ALSA: hda/realtek - Add quirk for MSI GE63 laptop MSI GE63 laptop with ALC1220 codec requires the very same quirk (ALC1220_FIXUP_CLEVO_P950) as other MSI devices for the proper sound output. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208057 Cc: Link: https://lore.kernel.org/r/20200616132150.8778-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 6d73f8beadb6..2713560e0c4b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2461,6 +2461,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS), SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_CLEVO_P950), + SND_PCI_QUIRK(0x1462, 0x11f7, "MSI-GE63", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x1275, "MSI-GL63", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x1276, "MSI-GL73", ALC1220_FIXUP_CLEVO_P950), From d7af722344e6dc52d87649100516515263e15c75 Mon Sep 17 00:00:00 2001 From: Drew Fustini Date: Tue, 9 Jun 2020 23:45:21 +0200 Subject: [PATCH 102/618] ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect AM3358 pin mcasp0_aclkr (ZCZ ball B13) [0] is routed to P1.31 header [1] Mode 4 of this pin is mmc0_sdwp (SD Write Protect). A signal connected to P1.31 may accidentally trigger mmc0 write protection. To avoid this situation, do not put mcasp0_aclkr in mode 4 (mmc0_sdwp) by default. [0] http://www.ti.com/lit/ds/symlink/am3358.pdf [1] https://github.com/beagleboard/pocketbeagle/wiki/System-Reference-Manual#531_Expansion_Headers Fixes: 047905376a16 (ARM: dts: Add am335x-pocketbeagle) Signed-off-by: Robert Nelson Signed-off-by: Drew Fustini Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-pocketbeagle.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts index 4da719098028..f0b222201b86 100644 --- a/arch/arm/boot/dts/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts @@ -88,7 +88,6 @@ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4) /* (B12) mcasp0_aclkr.mmc0_sdwp */ >; }; From 9cf28e41f9f768791f54ee18333239fda6927ed8 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 12 Jun 2020 10:19:50 -0700 Subject: [PATCH 103/618] ARM: dts: Fix duovero smsc interrupt for suspend While testing the recent suspend and resume regressions I noticed that duovero can still end up losing edge gpio interrupts on runtime suspend. This causes NFSroot easily stopping working after resume on duovero. Let's fix the issue by using gpio level interrupts for smsc as then the gpio interrupt state is seen by the gpio controller on resume. Fixes: 731b409878a3 ("ARM: dts: Configure duovero for to allow core retention during idle") Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-duovero-parlor.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index 8047e8cdb3af..4548d87534e3 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -139,7 +139,7 @@ &gpmc { ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio2>; - interrupts = <12 IRQ_TYPE_EDGE_FALLING>; /* gpio_44 */ + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; /* gpio_44 */ phy-mode = "mii"; From c030688d4427658bc4e947111341f75d2cb3d526 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 12 Jun 2020 10:23:40 -0700 Subject: [PATCH 104/618] ARM: dts: Fix omap4 system timer source clocks I accidentally flipped the system timer to use system clock instead of the 32k source clock. Fixes: 14b1925a7219 ("ARM: dts: Configure system timers for omap4") Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 6c2b07f0704d..4400f5f8e099 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -662,6 +662,6 @@ &timer1_target { ti,no-idle; timer@0 { assigned-clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>; - assigned-clock-parents = <&sys_clkin_ck>; + assigned-clock-parents = <&sys_32k_ck>; }; }; From 80bf72598663496d08b3c0231377db6a99d7fd68 Mon Sep 17 00:00:00 2001 From: Drew Fustini Date: Mon, 15 Jun 2020 17:57:01 +0200 Subject: [PATCH 105/618] ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode Since commit cd28d1d6e52e ("net: phy: at803x: Disable phy delay for RGMII mode") the networking is broken on the BeagleBone AI which has the AR8035 PHY for Gigabit Ethernet [0]. The fix is to switch from phy-mode = "rgmii" to phy-mode = "rgmii-rxid". Note: Grygorii made a similar DT fix for other AM57xx boards with a different phy in commit 820f8a870f65 ("ARM: dts: am57xx: fix networking on boards with ksz9031 phy"). [0] https://git.io/Jf7PX Fixes: 520557d4854b ("ARM: dts: am5729: beaglebone-ai: adding device tree") Cc: Vinod Koul Reviewed-by: Grygorii Strashko Signed-off-by: Robert Nelson Signed-off-by: Drew Fustini Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am5729-beagleboneai.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts index 9877d7709d41..4c51c6b05e64 100644 --- a/arch/arm/boot/dts/am5729-beagleboneai.dts +++ b/arch/arm/boot/dts/am5729-beagleboneai.dts @@ -505,7 +505,7 @@ &mac { &cpsw_emac0 { phy-handle = <&phy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; }; &ocp { From 2fd2bc7f49324e7b439e3c5584762abd0a9a13bc Mon Sep 17 00:00:00 2001 From: Colton Lewis Date: Sun, 14 Jun 2020 04:08:04 +0000 Subject: [PATCH 106/618] gpu: host1x: Correct trivial kernel-doc inconsistencies Silence documentation build warnings by adding kernel-doc fields. ./include/linux/host1x.h:69: warning: Function parameter or member 'parent' not described in 'host1x_client' ./include/linux/host1x.h:69: warning: Function parameter or member 'usecount' not described in 'host1x_client' ./include/linux/host1x.h:69: warning: Function parameter or member 'lock' not described in 'host1x_client' Signed-off-by: Colton Lewis Signed-off-by: Thierry Reding --- include/linux/host1x.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/linux/host1x.h b/include/linux/host1x.h index c230b4e70d75..a3a568bf9686 100644 --- a/include/linux/host1x.h +++ b/include/linux/host1x.h @@ -48,6 +48,9 @@ struct host1x_client_ops { * @channel: host1x channel associated with this client * @syncpts: array of syncpoints requested for this client * @num_syncpts: number of syncpoints requested for this client + * @parent: pointer to parent structure + * @usecount: reference count for this structure + * @lock: mutex for mutually exclusive concurrency */ struct host1x_client { struct list_head list; From d9a0a05bf8c76e6dc79230669a8b5d685b168c30 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 8 Apr 2020 19:38:02 +0200 Subject: [PATCH 107/618] gpu: host1x: Detach driver on unregister Currently when a host1x device driver is unregistered, it is not detached from the host1x controller, which means that the device will stay around and when the driver is registered again, it may bind to the old, stale device rather than the new one that was created from scratch upon driver registration. This in turn can cause various weird crashes within the driver core because it is confronted with a device that was already deleted. Fix this by detaching the driver from the host1x controller when it is unregistered. This ensures that the deleted device also is no longer present in the device list that drivers will bind to. Reported-by: Sowjanya Komatineni Signed-off-by: Thierry Reding Tested-by: Sowjanya Komatineni Signed-off-by: Thierry Reding --- drivers/gpu/host1x/bus.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/host1x/bus.c b/drivers/gpu/host1x/bus.c index 6a995db51d6d..e201f62d62c0 100644 --- a/drivers/gpu/host1x/bus.c +++ b/drivers/gpu/host1x/bus.c @@ -686,8 +686,17 @@ EXPORT_SYMBOL(host1x_driver_register_full); */ void host1x_driver_unregister(struct host1x_driver *driver) { + struct host1x *host1x; + driver_unregister(&driver->driver); + mutex_lock(&devices_lock); + + list_for_each_entry(host1x, &devices, list) + host1x_detach_driver(host1x, driver); + + mutex_unlock(&devices_lock); + mutex_lock(&drivers_lock); list_del_init(&driver->list); mutex_unlock(&drivers_lock); From fce3a51d9b31312aa12ecb72ffabfc4c7b40bdc6 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 10 Jun 2020 13:30:59 +0200 Subject: [PATCH 108/618] drm/tegra: Add zpos property for cursor planes As of commit 4dc55525b095 ("drm: plane: Verify that no or all planes have a zpos property") a warning is emitted if there's a mix of planes with and without a zpos property. On Tegra, cursor planes are always composited on top of all other planes, which is why they never had a zpos property attached to them. However, since the composition order is fixed, this is trivial to remedy by simply attaching an immutable zpos property to them. v3: do not hardcode zpos for overlay planes used as cursor (Dmitry) v2: hardcode cursor plane zpos to 255 instead of 0 (Ville) Reported-by: Jonathan Hunter Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/dc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c index 83f31c6e891c..04d6848d19fc 100644 --- a/drivers/gpu/drm/tegra/dc.c +++ b/drivers/gpu/drm/tegra/dc.c @@ -957,6 +957,7 @@ static struct drm_plane *tegra_dc_cursor_plane_create(struct drm_device *drm, } drm_plane_helper_add(&plane->base, &tegra_cursor_plane_helper_funcs); + drm_plane_create_zpos_immutable_property(&plane->base, 255); return &plane->base; } From 9fecd13202f520f3f25d5b1c313adb740fe19773 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 1 Jun 2020 19:12:06 +0100 Subject: [PATCH 109/618] btrfs: fix a block group ref counter leak after failure to remove block group When removing a block group, if we fail to delete the block group's item from the extent tree, we jump to the 'out' label and end up decrementing the block group's reference count once only (by 1), resulting in a counter leak because the block group at that point was already removed from the block group cache rbtree - so we have to decrement the reference count twice, once for the rbtree and once for our lookup at the start of the function. There is a second bug where if removing the free space tree entries (the call to remove_block_group_free_space()) fails we end up jumping to the 'out_put_group' label but end up decrementing the reference count only once, when we should have done it twice, since we have already removed the block group from the block group cache rbtree. This happens because the reference count decrement for the rbtree reference happens after attempting to remove the free space tree entries, which is far away from the place where we remove the block group from the rbtree. To make things less error prone, decrement the reference count for the rbtree immediately after removing the block group from it. This also eleminates the need for two different exit labels on error, renaming 'out_put_label' to just 'out' and removing the old 'out'. Fixes: f6033c5e333238 ("btrfs: fix block group leak when removing fails") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Nikolay Borisov Reviewed-by: Anand Jain Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/block-group.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/fs/btrfs/block-group.c b/fs/btrfs/block-group.c index 176e8a292fd1..6462dd0b155c 100644 --- a/fs/btrfs/block-group.c +++ b/fs/btrfs/block-group.c @@ -940,7 +940,7 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans, path = btrfs_alloc_path(); if (!path) { ret = -ENOMEM; - goto out_put_group; + goto out; } /* @@ -978,7 +978,7 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans, ret = btrfs_orphan_add(trans, BTRFS_I(inode)); if (ret) { btrfs_add_delayed_iput(inode); - goto out_put_group; + goto out; } clear_nlink(inode); /* One for the block groups ref */ @@ -1001,13 +1001,13 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans, ret = btrfs_search_slot(trans, tree_root, &key, path, -1, 1); if (ret < 0) - goto out_put_group; + goto out; if (ret > 0) btrfs_release_path(path); if (ret == 0) { ret = btrfs_del_item(trans, tree_root, path); if (ret) - goto out_put_group; + goto out; btrfs_release_path(path); } @@ -1016,6 +1016,9 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans, &fs_info->block_group_cache_tree); RB_CLEAR_NODE(&block_group->cache_node); + /* Once for the block groups rbtree */ + btrfs_put_block_group(block_group); + if (fs_info->first_logical_byte == block_group->start) fs_info->first_logical_byte = (u64)-1; spin_unlock(&fs_info->block_group_cache_lock); @@ -1125,10 +1128,7 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans, ret = remove_block_group_free_space(trans, block_group); if (ret) - goto out_put_group; - - /* Once for the block groups rbtree */ - btrfs_put_block_group(block_group); + goto out; ret = remove_block_group_item(trans, path, block_group); if (ret < 0) @@ -1145,10 +1145,9 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans, free_extent_map(em); } -out_put_group: +out: /* Once for the lookup reference */ btrfs_put_block_group(block_group); -out: if (remove_rsv) btrfs_delayed_refs_rsv_release(fs_info, 1); btrfs_free_path(path); From ffcb9d44572afbaf8fa6dbf5115bff6dab7b299e Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 1 Jun 2020 19:12:19 +0100 Subject: [PATCH 110/618] btrfs: fix race between block group removal and block group creation There is a race between block group removal and block group creation when the removal is completed by a task running fitrim or scrub. When this happens we end up failing the block group creation with an error -EEXIST since we attempt to insert a duplicate block group item key in the extent tree. That results in a transaction abort. The race happens like this: 1) Task A is doing a fitrim, and at btrfs_trim_block_group() it freezes block group X with btrfs_freeze_block_group() (until very recently that was named btrfs_get_block_group_trimming()); 2) Task B starts removing block group X, either because it's now unused or due to relocation for example. So at btrfs_remove_block_group(), while holding the chunk mutex and the block group's lock, it sets the 'removed' flag of the block group and it sets the local variable 'remove_em' to false, because the block group is currently frozen (its 'frozen' counter is > 0, until very recently this counter was named 'trimming'); 3) Task B unlocks the block group and the chunk mutex; 4) Task A is done trimming the block group and unfreezes the block group by calling btrfs_unfreeze_block_group() (until very recently this was named btrfs_put_block_group_trimming()). In this function we lock the block group and set the local variable 'cleanup' to true because we were able to decrement the block group's 'frozen' counter down to 0 and the flag 'removed' is set in the block group. Since 'cleanup' is set to true, it locks the chunk mutex and removes the extent mapping representing the block group from the mapping tree; 5) Task C allocates a new block group Y and it picks up the logical address that block group X had as the logical address for Y, because X was the block group with the highest logical address and now the second block group with the highest logical address, the last in the fs mapping tree, ends at an offset corresponding to block group X's logical address (this logical address selection is done at volumes.c:find_next_chunk()). At this point the new block group Y does not have yet its item added to the extent tree (nor the corresponding device extent items and chunk item in the device and chunk trees). The new group Y is added to the list of pending block groups in the transaction handle; 6) Before task B proceeds to removing the block group item for block group X from the extent tree, which has a key matching: (X logical offset, BTRFS_BLOCK_GROUP_ITEM_KEY, length) task C while ending its transaction handle calls btrfs_create_pending_block_groups(), which finds block group Y and tries to insert the block group item for Y into the exten tree, which fails with -EEXIST since logical offset is the same that X had and task B hasn't yet deleted the key from the extent tree. This failure results in a transaction abort, producing a stack like the following: ------------[ cut here ]------------ BTRFS: Transaction aborted (error -17) WARNING: CPU: 2 PID: 19736 at fs/btrfs/block-group.c:2074 btrfs_create_pending_block_groups+0x1eb/0x260 [btrfs] Modules linked in: btrfs blake2b_generic xor raid6_pq (...) CPU: 2 PID: 19736 Comm: fsstress Tainted: G W 5.6.0-rc7-btrfs-next-58 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:btrfs_create_pending_block_groups+0x1eb/0x260 [btrfs] Code: ff ff ff 48 8b 55 50 f0 48 (...) RSP: 0018:ffffa4160a1c7d58 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff961581909d98 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffffffb3d63990 RDI: 0000000000000001 RBP: ffff9614f3356a58 R08: 0000000000000000 R09: 0000000000000001 R10: ffff9615b65b0040 R11: 0000000000000000 R12: ffff961581909c10 R13: ffff9615b0c32000 R14: ffff9614f3356ab0 R15: ffff9614be779000 FS: 00007f2ce2841e80(0000) GS:ffff9615bae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555f18780000 CR3: 0000000131d34005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: btrfs_start_dirty_block_groups+0x398/0x4e0 [btrfs] btrfs_commit_transaction+0xd0/0xc50 [btrfs] ? btrfs_attach_transaction_barrier+0x1e/0x50 [btrfs] ? __ia32_sys_fdatasync+0x20/0x20 iterate_supers+0xdb/0x180 ksys_sync+0x60/0xb0 __ia32_sys_sync+0xa/0x10 do_syscall_64+0x5c/0x280 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f2ce1d4d5b7 Code: 83 c4 08 48 3d 01 (...) RSP: 002b:00007ffd8b558c58 EFLAGS: 00000202 ORIG_RAX: 00000000000000a2 RAX: ffffffffffffffda RBX: 000000000000002c RCX: 00007f2ce1d4d5b7 RDX: 00000000ffffffff RSI: 00000000186ba07b RDI: 000000000000002c RBP: 0000555f17b9e520 R08: 0000000000000012 R09: 000000000000ce00 R10: 0000000000000078 R11: 0000000000000202 R12: 0000000000000032 R13: 0000000051eb851f R14: 00007ffd8b558cd0 R15: 0000555f1798ec20 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [] copy_process+0x74f/0x2020 softirqs last enabled at (0): [] copy_process+0x74f/0x2020 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace bd7c03622e0b0a9c ]--- Fix this simply by making btrfs_remove_block_group() remove the block group's item from the extent tree before it flags the block group as removed. Also make the free space deletion from the free space tree before flagging the block group as removed, to avoid a similar race with adding and removing free space entries for the free space tree. Fixes: 04216820fe83d5 ("Btrfs: fix race between fs trimming and block group remove/allocation") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/block-group.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/fs/btrfs/block-group.c b/fs/btrfs/block-group.c index 6462dd0b155c..c037ef514b64 100644 --- a/fs/btrfs/block-group.c +++ b/fs/btrfs/block-group.c @@ -1092,6 +1092,25 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans, spin_unlock(&block_group->space_info->lock); + /* + * Remove the free space for the block group from the free space tree + * and the block group's item from the extent tree before marking the + * block group as removed. This is to prevent races with tasks that + * freeze and unfreeze a block group, this task and another task + * allocating a new block group - the unfreeze task ends up removing + * the block group's extent map before the task calling this function + * deletes the block group item from the extent tree, allowing for + * another task to attempt to create another block group with the same + * item key (and failing with -EEXIST and a transaction abort). + */ + ret = remove_block_group_free_space(trans, block_group); + if (ret) + goto out; + + ret = remove_block_group_item(trans, path, block_group); + if (ret < 0) + goto out; + mutex_lock(&fs_info->chunk_mutex); spin_lock(&block_group->lock); block_group->removed = 1; @@ -1126,14 +1145,6 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans, mutex_unlock(&fs_info->chunk_mutex); - ret = remove_block_group_free_space(trans, block_group); - if (ret) - goto out; - - ret = remove_block_group_item(trans, path, block_group); - if (ret < 0) - goto out; - if (remove_em) { struct extent_map_tree *em_tree; From 432cd2a10f1c10cead91fe706ff5dc52f06d642a Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 8 Jun 2020 13:32:55 +0100 Subject: [PATCH 111/618] btrfs: fix data block group relocation failure due to concurrent scrub When running relocation of a data block group while scrub is running in parallel, it is possible that the relocation will fail and abort the current transaction with an -EINVAL error: [134243.988595] BTRFS info (device sdc): found 14 extents, stage: move data extents [134243.999871] ------------[ cut here ]------------ [134244.000741] BTRFS: Transaction aborted (error -22) [134244.001692] WARNING: CPU: 0 PID: 26954 at fs/btrfs/ctree.c:1071 __btrfs_cow_block+0x6a7/0x790 [btrfs] [134244.003380] Modules linked in: btrfs blake2b_generic xor raid6_pq (...) [134244.012577] CPU: 0 PID: 26954 Comm: btrfs Tainted: G W 5.6.0-rc7-btrfs-next-58 #5 [134244.014162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [134244.016184] RIP: 0010:__btrfs_cow_block+0x6a7/0x790 [btrfs] [134244.017151] Code: 48 c7 c7 (...) [134244.020549] RSP: 0018:ffffa41607863888 EFLAGS: 00010286 [134244.021515] RAX: 0000000000000000 RBX: ffff9614bdfe09c8 RCX: 0000000000000000 [134244.022822] RDX: 0000000000000001 RSI: ffffffffb3d63980 RDI: 0000000000000001 [134244.024124] RBP: ffff961589e8c000 R08: 0000000000000000 R09: 0000000000000001 [134244.025424] R10: ffffffffc0ae5955 R11: 0000000000000000 R12: ffff9614bd530d08 [134244.026725] R13: ffff9614ced41b88 R14: ffff9614bdfe2a48 R15: 0000000000000000 [134244.028024] FS: 00007f29b63c08c0(0000) GS:ffff9615ba600000(0000) knlGS:0000000000000000 [134244.029491] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [134244.030560] CR2: 00007f4eb339b000 CR3: 0000000130d6e006 CR4: 00000000003606f0 [134244.031997] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [134244.033153] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [134244.034484] Call Trace: [134244.034984] btrfs_cow_block+0x12b/0x2b0 [btrfs] [134244.035859] do_relocation+0x30b/0x790 [btrfs] [134244.036681] ? do_raw_spin_unlock+0x49/0xc0 [134244.037460] ? _raw_spin_unlock+0x29/0x40 [134244.038235] relocate_tree_blocks+0x37b/0x730 [btrfs] [134244.039245] relocate_block_group+0x388/0x770 [btrfs] [134244.040228] btrfs_relocate_block_group+0x161/0x2e0 [btrfs] [134244.041323] btrfs_relocate_chunk+0x36/0x110 [btrfs] [134244.041345] btrfs_balance+0xc06/0x1860 [btrfs] [134244.043382] ? btrfs_ioctl_balance+0x27c/0x310 [btrfs] [134244.045586] btrfs_ioctl_balance+0x1ed/0x310 [btrfs] [134244.045611] btrfs_ioctl+0x1880/0x3760 [btrfs] [134244.049043] ? do_raw_spin_unlock+0x49/0xc0 [134244.049838] ? _raw_spin_unlock+0x29/0x40 [134244.050587] ? __handle_mm_fault+0x11b3/0x14b0 [134244.051417] ? ksys_ioctl+0x92/0xb0 [134244.052070] ksys_ioctl+0x92/0xb0 [134244.052701] ? trace_hardirqs_off_thunk+0x1a/0x1c [134244.053511] __x64_sys_ioctl+0x16/0x20 [134244.054206] do_syscall_64+0x5c/0x280 [134244.054891] entry_SYSCALL_64_after_hwframe+0x49/0xbe [134244.055819] RIP: 0033:0x7f29b51c9dd7 [134244.056491] Code: 00 00 00 (...) [134244.059767] RSP: 002b:00007ffcccc1dd08 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [134244.061168] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f29b51c9dd7 [134244.062474] RDX: 00007ffcccc1dda0 RSI: 00000000c4009420 RDI: 0000000000000003 [134244.063771] RBP: 0000000000000003 R08: 00005565cea4b000 R09: 0000000000000000 [134244.065032] R10: 0000000000000541 R11: 0000000000000202 R12: 00007ffcccc2060a [134244.066327] R13: 00007ffcccc1dda0 R14: 0000000000000002 R15: 00007ffcccc1dec0 [134244.067626] irq event stamp: 0 [134244.068202] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [134244.069351] hardirqs last disabled at (0): [] copy_process+0x74f/0x2020 [134244.070909] softirqs last enabled at (0): [] copy_process+0x74f/0x2020 [134244.072392] softirqs last disabled at (0): [<0000000000000000>] 0x0 [134244.073432] ---[ end trace bd7c03622e0b0a99 ]--- The -EINVAL error comes from the following chain of function calls: __btrfs_cow_block() <-- aborts the transaction btrfs_reloc_cow_block() replace_file_extents() get_new_location() <-- returns -EINVAL When relocating a data block group, for each allocated extent of the block group, we preallocate another extent (at prealloc_file_extent_cluster()), associated with the data relocation inode, and then dirty all its pages. These preallocated extents have, and must have, the same size that extents from the data block group being relocated have. Later before we start the relocation stage that updates pointers (bytenr field of file extent items) to point to the the new extents, we trigger writeback for the data relocation inode. The expectation is that writeback will write the pages to the previously preallocated extents, that it follows the NOCOW path. That is generally the case, however, if a scrub is running it may have turned the block group that contains those extents into RO mode, in which case writeback falls back to the COW path. However in the COW path instead of allocating exactly one extent with the expected size, the allocator may end up allocating several smaller extents due to free space fragmentation - because we tell it at cow_file_range() that the minimum allocation size can match the filesystem's sector size. This later breaks the relocation's expectation that an extent associated to a file extent item in the data relocation inode has the same size as the respective extent pointed by a file extent item in another tree - in this case the extent to which the relocation inode poins to is smaller, causing relocation.c:get_new_location() to return -EINVAL. For example, if we are relocating a data block group X that has a logical address of X and the block group has an extent allocated at the logical address X + 128KiB with a size of 64KiB: 1) At prealloc_file_extent_cluster() we allocate an extent for the data relocation inode with a size of 64KiB and associate it to the file offset 128KiB (X + 128KiB - X) of the data relocation inode. This preallocated extent was allocated at block group Z; 2) A scrub running in parallel turns block group Z into RO mode and starts scrubing its extents; 3) Relocation triggers writeback for the data relocation inode; 4) When running delalloc (btrfs_run_delalloc_range()), we try first the NOCOW path because the data relocation inode has BTRFS_INODE_PREALLOC set in its flags. However, because block group Z is in RO mode, the NOCOW path (run_delalloc_nocow()) falls back into the COW path, by calling cow_file_range(); 5) At cow_file_range(), in the first iteration of the while loop we call btrfs_reserve_extent() to allocate a 64KiB extent and pass it a minimum allocation size of 4KiB (fs_info->sectorsize). Due to free space fragmentation, btrfs_reserve_extent() ends up allocating two extents of 32KiB each, each one on a different iteration of that while loop; 6) Writeback of the data relocation inode completes; 7) Relocation proceeds and ends up at relocation.c:replace_file_extents(), with a leaf which has a file extent item that points to the data extent from block group X, that has a logical address (bytenr) of X + 128KiB and a size of 64KiB. Then it calls get_new_location(), which does a lookup in the data relocation tree for a file extent item starting at offset 128KiB (X + 128KiB - X) and belonging to the data relocation inode. It finds a corresponding file extent item, however that item points to an extent that has a size of 32KiB, which doesn't match the expected size of 64KiB, resuling in -EINVAL being returned from this function and propagated up to __btrfs_cow_block(), which aborts the current transaction. To fix this make sure that at cow_file_range() when we call the allocator we pass it a minimum allocation size corresponding the desired extent size if the inode belongs to the data relocation tree, otherwise pass it the filesystem's sector size as the minimum allocation size. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/inode.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 12b5d61f23bb..62c3f4972ff6 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -985,6 +985,7 @@ static noinline int cow_file_range(struct inode *inode, u64 num_bytes; unsigned long ram_size; u64 cur_alloc_size = 0; + u64 min_alloc_size; u64 blocksize = fs_info->sectorsize; struct btrfs_key ins; struct extent_map *em; @@ -1035,10 +1036,26 @@ static noinline int cow_file_range(struct inode *inode, btrfs_drop_extent_cache(BTRFS_I(inode), start, start + num_bytes - 1, 0); + /* + * Relocation relies on the relocated extents to have exactly the same + * size as the original extents. Normally writeback for relocation data + * extents follows a NOCOW path because relocation preallocates the + * extents. However, due to an operation such as scrub turning a block + * group to RO mode, it may fallback to COW mode, so we must make sure + * an extent allocated during COW has exactly the requested size and can + * not be split into smaller extents, otherwise relocation breaks and + * fails during the stage where it updates the bytenr of file extent + * items. + */ + if (root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID) + min_alloc_size = num_bytes; + else + min_alloc_size = fs_info->sectorsize; + while (num_bytes > 0) { cur_alloc_size = num_bytes; ret = btrfs_reserve_extent(root, cur_alloc_size, cur_alloc_size, - fs_info->sectorsize, 0, alloc_hint, + min_alloc_size, 0, alloc_hint, &ins, 1, 1); if (ret < 0) goto out_unlock; From 6bd335b469f945f75474c11e3f577f85409f39c3 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 8 Jun 2020 13:33:05 +0100 Subject: [PATCH 112/618] btrfs: fix bytes_may_use underflow when running balance and scrub in parallel When balance and scrub are running in parallel it is possible to end up with an underflow of the bytes_may_use counter of the data space_info object, which triggers a warning like the following: [134243.793196] BTRFS info (device sdc): relocating block group 1104150528 flags data [134243.806891] ------------[ cut here ]------------ [134243.807561] WARNING: CPU: 1 PID: 26884 at fs/btrfs/space-info.h:125 btrfs_add_reserved_bytes+0x1da/0x280 [btrfs] [134243.808819] Modules linked in: btrfs blake2b_generic xor (...) [134243.815779] CPU: 1 PID: 26884 Comm: kworker/u8:8 Tainted: G W 5.6.0-rc7-btrfs-next-58 #5 [134243.816944] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [134243.818389] Workqueue: writeback wb_workfn (flush-btrfs-108483) [134243.819186] RIP: 0010:btrfs_add_reserved_bytes+0x1da/0x280 [btrfs] [134243.819963] Code: 0b f2 85 (...) [134243.822271] RSP: 0018:ffffa4160aae7510 EFLAGS: 00010287 [134243.822929] RAX: 000000000000c000 RBX: ffff96159a8c1000 RCX: 0000000000000000 [134243.823816] RDX: 0000000000008000 RSI: 0000000000000000 RDI: ffff96158067a810 [134243.824742] RBP: ffff96158067a800 R08: 0000000000000001 R09: 0000000000000000 [134243.825636] R10: ffff961501432a40 R11: 0000000000000000 R12: 000000000000c000 [134243.826532] R13: 0000000000000001 R14: ffffffffffff4000 R15: ffff96158067a810 [134243.827432] FS: 0000000000000000(0000) GS:ffff9615baa00000(0000) knlGS:0000000000000000 [134243.828451] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [134243.829184] CR2: 000055bd7e414000 CR3: 00000001077be004 CR4: 00000000003606e0 [134243.830083] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [134243.830975] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [134243.831867] Call Trace: [134243.832211] find_free_extent+0x4a0/0x16c0 [btrfs] [134243.832846] btrfs_reserve_extent+0x91/0x180 [btrfs] [134243.833487] cow_file_range+0x12d/0x490 [btrfs] [134243.834080] fallback_to_cow+0x82/0x1b0 [btrfs] [134243.834689] ? release_extent_buffer+0x121/0x170 [btrfs] [134243.835370] run_delalloc_nocow+0x33f/0xa30 [btrfs] [134243.836032] btrfs_run_delalloc_range+0x1ea/0x6d0 [btrfs] [134243.836725] ? find_lock_delalloc_range+0x221/0x250 [btrfs] [134243.837450] writepage_delalloc+0xe8/0x150 [btrfs] [134243.838059] __extent_writepage+0xe8/0x4c0 [btrfs] [134243.838674] extent_write_cache_pages+0x237/0x530 [btrfs] [134243.839364] extent_writepages+0x44/0xa0 [btrfs] [134243.839946] do_writepages+0x23/0x80 [134243.840401] __writeback_single_inode+0x59/0x700 [134243.841006] writeback_sb_inodes+0x267/0x5f0 [134243.841548] __writeback_inodes_wb+0x87/0xe0 [134243.842091] wb_writeback+0x382/0x590 [134243.842574] ? wb_workfn+0x4a2/0x6c0 [134243.843030] wb_workfn+0x4a2/0x6c0 [134243.843468] process_one_work+0x26d/0x6a0 [134243.843978] worker_thread+0x4f/0x3e0 [134243.844452] ? process_one_work+0x6a0/0x6a0 [134243.844981] kthread+0x103/0x140 [134243.845400] ? kthread_create_worker_on_cpu+0x70/0x70 [134243.846030] ret_from_fork+0x3a/0x50 [134243.846494] irq event stamp: 0 [134243.846892] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [134243.847682] hardirqs last disabled at (0): [] copy_process+0x74f/0x2020 [134243.848687] softirqs last enabled at (0): [] copy_process+0x74f/0x2020 [134243.849913] softirqs last disabled at (0): [<0000000000000000>] 0x0 [134243.850698] ---[ end trace bd7c03622e0b0a96 ]--- [134243.851335] ------------[ cut here ]------------ When relocating a data block group, for each extent allocated in the block group we preallocate another extent with the same size for the data relocation inode (we do it at prealloc_file_extent_cluster()). We reserve space by calling btrfs_check_data_free_space(), which ends up incrementing the data space_info's bytes_may_use counter, and then call btrfs_prealloc_file_range() to allocate the extent, which always decrements the bytes_may_use counter by the same amount. The expectation is that writeback of the data relocation inode always follows a NOCOW path, by writing into the preallocated extents. However, when starting writeback we might end up falling back into the COW path, because the block group that contains the preallocated extent was turned into RO mode by a scrub running in parallel. The COW path then calls the extent allocator which ends up calling btrfs_add_reserved_bytes(), and this function decrements the bytes_may_use counter of the data space_info object by an amount corresponding to the size of the allocated extent, despite we haven't previously incremented it. When the counter currently has a value smaller then the allocated extent we reset the counter to 0 and emit a warning, otherwise we just decrement it and slowly mess up with this counter which is crucial for space reservation, the end result can be granting reserved space to tasks when there isn't really enough free space, and having the tasks fail later in critical places where error handling consists of a transaction abort or hitting a BUG_ON(). Fix this by making sure that if we fallback to the COW path for a data relocation inode, we increment the bytes_may_use counter of the data space_info object. The COW path will then decrement it at btrfs_add_reserved_bytes() on success or through its error handling part by a call to extent_clear_unlock_delalloc() (which ends up calling btrfs_clear_delalloc_extent() that does the decrement operation) in case of an error. Test case btrfs/061 from fstests could sporadically trigger this. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/inode.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 62c3f4972ff6..62b49d2db928 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1378,6 +1378,8 @@ static int fallback_to_cow(struct inode *inode, struct page *locked_page, int *page_started, unsigned long *nr_written) { const bool is_space_ino = btrfs_is_free_space_inode(BTRFS_I(inode)); + const bool is_reloc_ino = (BTRFS_I(inode)->root->root_key.objectid == + BTRFS_DATA_RELOC_TREE_OBJECTID); const u64 range_bytes = end + 1 - start; struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree; u64 range_start = start; @@ -1408,18 +1410,23 @@ static int fallback_to_cow(struct inode *inode, struct page *locked_page, * data space info, which we incremented in the step above. * * If we need to fallback to cow and the inode corresponds to a free - * space cache inode, we must also increment bytes_may_use of the data - * space_info for the same reason. Space caches always get a prealloc + * space cache inode or an inode of the data relocation tree, we must + * also increment bytes_may_use of the data space_info for the same + * reason. Space caches and relocated data extents always get a prealloc * extent for them, however scrub or balance may have set the block - * group that contains that extent to RO mode. + * group that contains that extent to RO mode and therefore force COW + * when starting writeback. */ count = count_range_bits(io_tree, &range_start, end, range_bytes, EXTENT_NORESERVE, 0); - if (count > 0 || is_space_ino) { - const u64 bytes = is_space_ino ? range_bytes : count; + if (count > 0 || is_space_ino || is_reloc_ino) { + u64 bytes = count; struct btrfs_fs_info *fs_info = BTRFS_I(inode)->root->fs_info; struct btrfs_space_info *sinfo = fs_info->data_sinfo; + if (is_space_ino || is_reloc_ino) + bytes = range_bytes; + spin_lock(&sinfo->lock); btrfs_space_info_update_bytes_may_use(fs_info, sinfo, bytes); spin_unlock(&sinfo->lock); From e7a79811d0db136dc2d336b56d54cf1b774ce972 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 15 Jun 2020 10:38:44 +0100 Subject: [PATCH 113/618] btrfs: check if a log root exists before locking the log_mutex on unlink This brings back an optimization that commit e678934cbe5f02 ("btrfs: Remove unnecessary check from join_running_log_trans") removed, but in a different form. So it's almost equivalent to a revert. That commit removed an optimization where we avoid locking a root's log_mutex when there is no log tree created in the current transaction. The affected code path is triggered through unlink operations. That commit was based on the assumption that the optimization was not necessary because we used to have the following checks when the patch was authored: int btrfs_del_dir_entries_in_log(...) { (...) if (dir->logged_trans < trans->transid) return 0; ret = join_running_log_trans(root); (...) } int btrfs_del_inode_ref_in_log(...) { (...) if (inode->logged_trans < trans->transid) return 0; ret = join_running_log_trans(root); (...) } However before that patch was merged, another patch was merged first which replaced those checks because they were buggy. That other patch corresponds to commit 803f0f64d17769 ("Btrfs: fix fsync not persisting dentry deletions due to inode evictions"). The assumption that if the logged_trans field of an inode had a smaller value then the current transaction's generation (transid) meant that the inode was not logged in the current transaction was only correct if the inode was not evicted and reloaded in the current transaction. So the corresponding bug fix changed those checks and replaced them with the following helper function: static bool inode_logged(struct btrfs_trans_handle *trans, struct btrfs_inode *inode) { if (inode->logged_trans == trans->transid) return true; if (inode->last_trans == trans->transid && test_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &inode->runtime_flags) && !test_bit(BTRFS_FS_LOG_RECOVERING, &trans->fs_info->flags)) return true; return false; } So if we have a subvolume without a log tree in the current transaction (because we had no fsyncs), every time we unlink an inode we can end up trying to lock the log_mutex of the root through join_running_log_trans() twice, once for the inode being unlinked (by btrfs_del_inode_ref_in_log()) and once for the parent directory (with btrfs_del_dir_entries_in_log()). This means if we have several unlink operations happening in parallel for inodes in the same subvolume, and the those inodes and/or their parent inode were changed in the current transaction, we end up having a lot of contention on the log_mutex. The test robots from intel reported a -30.7% performance regression for a REAIM test after commit e678934cbe5f02 ("btrfs: Remove unnecessary check from join_running_log_trans"). So just bring back the optimization to join_running_log_trans() where we check first if a log root exists before trying to lock the log_mutex. This is done by checking for a bit that is set on the root when a log tree is created and removed when a log tree is freed (at transaction commit time). Commit e678934cbe5f02 ("btrfs: Remove unnecessary check from join_running_log_trans") was merged in the 5.4 merge window while commit 803f0f64d17769 ("Btrfs: fix fsync not persisting dentry deletions due to inode evictions") was merged in the 5.3 merge window. But the first commit was actually authored before the second commit (May 23 2019 vs June 19 2019). Reported-by: kernel test robot Link: https://lore.kernel.org/lkml/20200611090233.GL12456@shao2-debian/ Fixes: e678934cbe5f02 ("btrfs: Remove unnecessary check from join_running_log_trans") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/ctree.h | 2 ++ fs/btrfs/tree-log.c | 5 +++++ 2 files changed, 7 insertions(+) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 30ce7039bc27..d404cce8ae40 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1009,6 +1009,8 @@ enum { BTRFS_ROOT_DEAD_RELOC_TREE, /* Mark dead root stored on device whose cleanup needs to be resumed */ BTRFS_ROOT_DEAD_TREE, + /* The root has a log tree. Used only for subvolume roots. */ + BTRFS_ROOT_HAS_LOG_TREE, }; /* diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 920cee312f4e..cd5348f352dd 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -169,6 +169,7 @@ static int start_log_trans(struct btrfs_trans_handle *trans, if (ret) goto out; + set_bit(BTRFS_ROOT_HAS_LOG_TREE, &root->state); clear_bit(BTRFS_ROOT_MULTI_LOG_TASKS, &root->state); root->log_start_pid = current->pid; } @@ -195,6 +196,9 @@ static int join_running_log_trans(struct btrfs_root *root) { int ret = -ENOENT; + if (!test_bit(BTRFS_ROOT_HAS_LOG_TREE, &root->state)) + return ret; + mutex_lock(&root->log_mutex); if (root->log_root) { ret = 0; @@ -3303,6 +3307,7 @@ int btrfs_free_log(struct btrfs_trans_handle *trans, struct btrfs_root *root) if (root->log_root) { free_log_tree(trans, root->log_root); root->log_root = NULL; + clear_bit(BTRFS_ROOT_HAS_LOG_TREE, &root->state); } return 0; } From f2cb2f39ccc30fa13d3ac078d461031a63960e5b Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 15 Jun 2020 18:46:01 +0100 Subject: [PATCH 114/618] btrfs: fix hang on snapshot creation after RWF_NOWAIT write If we do a successful RWF_NOWAIT write we end up locking the snapshot lock of the inode, through a call to check_can_nocow(), but we never unlock it. This means the next attempt to create a snapshot on the subvolume will hang forever. Trivial reproducer: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ touch /mnt/foobar $ chattr +C /mnt/foobar $ xfs_io -d -c "pwrite -S 0xab 0 64K" /mnt/foobar $ xfs_io -d -c "pwrite -N -V 1 -S 0xfe 0 64K" /mnt/foobar $ btrfs subvolume snapshot -r /mnt /mnt/snap --> hangs Fix this by unlocking the snapshot lock if check_can_nocow() returned success. Fixes: edf064e7c6fec3 ("btrfs: nowait aio support") CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/file.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 2c14312b05e8..04faa04fccd1 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1914,6 +1914,8 @@ static ssize_t btrfs_file_write_iter(struct kiocb *iocb, inode_unlock(inode); return -EAGAIN; } + /* check_can_nocow() locks the snapshot lock on success */ + btrfs_drew_write_unlock(&root->snapshot_lock); } current->backing_dev_info = inode_to_bdi(inode); From 4b1946284dd6641afdb9457101056d9e6ee6204c Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 15 Jun 2020 18:48:58 +0100 Subject: [PATCH 115/618] btrfs: fix failure of RWF_NOWAIT write into prealloc extent beyond eof If we attempt to write to prealloc extent located after eof using a RWF_NOWAIT write, we always fail with -EAGAIN. We do actually check if we have an allocated extent for the write at the start of btrfs_file_write_iter() through a call to check_can_nocow(), but later when we go into the actual direct IO write path we simply return -EAGAIN if the write starts at or beyond EOF. Trivial to reproduce: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ touch /mnt/foo $ chattr +C /mnt/foo $ xfs_io -d -c "pwrite -S 0xab 0 64K" /mnt/foo wrote 65536/65536 bytes at offset 0 64 KiB, 16 ops; 0.0004 sec (135.575 MiB/sec and 34707.1584 ops/sec) $ xfs_io -c "falloc -k 64K 1M" /mnt/foo $ xfs_io -d -c "pwrite -N -V 1 -S 0xfe -b 64K 64K 64K" /mnt/foo pwrite: Resource temporarily unavailable On xfs and ext4 the write succeeds, as expected. Fix this by removing the wrong check at btrfs_direct_IO(). Fixes: edf064e7c6fec3 ("btrfs: nowait aio support") CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/inode.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 62b49d2db928..cfa863d2d97c 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -7889,9 +7889,6 @@ static ssize_t btrfs_direct_IO(struct kiocb *iocb, struct iov_iter *iter) dio_data.overwrite = 1; inode_unlock(inode); relock = true; - } else if (iocb->ki_flags & IOCB_NOWAIT) { - ret = -EAGAIN; - goto out; } ret = btrfs_delalloc_reserve_space(inode, &data_reserved, offset, count); From 260a63395f90f67d6ab89e4266af9e3dc34a77e9 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 15 Jun 2020 18:49:13 +0100 Subject: [PATCH 116/618] btrfs: fix RWF_NOWAIT write not failling when we need to cow If we attempt to do a RWF_NOWAIT write against a file range for which we can only do NOCOW for a part of it, due to the existence of holes or shared extents for example, we proceed with the write as if it were possible to NOCOW the whole range. Example: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ touch /mnt/sdj/bar $ chattr +C /mnt/sdj/bar $ xfs_io -d -c "pwrite -S 0xab -b 256K 0 256K" /mnt/bar wrote 262144/262144 bytes at offset 0 256 KiB, 1 ops; 0.0003 sec (694.444 MiB/sec and 2777.7778 ops/sec) $ xfs_io -c "fpunch 64K 64K" /mnt/bar $ sync $ xfs_io -d -c "pwrite -N -V 1 -b 128K -S 0xfe 0 128K" /mnt/bar wrote 131072/131072 bytes at offset 0 128 KiB, 1 ops; 0.0007 sec (160.051 MiB/sec and 1280.4097 ops/sec) This last write should fail with -EAGAIN since the file range from 64K to 128K is a hole. On xfs it fails, as expected, but on ext4 it currently succeeds because apparently it is expensive to check if there are extents allocated for the whole range, but I'll check with the ext4 people. Fix the issue by checking if check_can_nocow() returns a number of NOCOW'able bytes smaller then the requested number of bytes, and if it does return -EAGAIN. Fixes: edf064e7c6fec3 ("btrfs: nowait aio support") CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/file.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 04faa04fccd1..6d5d905281c6 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1904,18 +1904,29 @@ static ssize_t btrfs_file_write_iter(struct kiocb *iocb, pos = iocb->ki_pos; count = iov_iter_count(from); if (iocb->ki_flags & IOCB_NOWAIT) { + size_t nocow_bytes = count; + /* * We will allocate space in case nodatacow is not set, * so bail */ if (!(BTRFS_I(inode)->flags & (BTRFS_INODE_NODATACOW | BTRFS_INODE_PREALLOC)) || - check_can_nocow(BTRFS_I(inode), pos, &count) <= 0) { + check_can_nocow(BTRFS_I(inode), pos, &nocow_bytes) <= 0) { inode_unlock(inode); return -EAGAIN; } /* check_can_nocow() locks the snapshot lock on success */ btrfs_drew_write_unlock(&root->snapshot_lock); + /* + * There are holes in the range or parts of the range that must + * be COWed (shared extents, RO block groups, etc), so just bail + * out. + */ + if (nocow_bytes < count) { + inode_unlock(inode); + return -EAGAIN; + } } current->backing_dev_info = inode_to_bdi(inode); From 5dbb75ed6900048e146247b6325742d92c892548 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 15 Jun 2020 18:49:39 +0100 Subject: [PATCH 117/618] btrfs: fix RWF_NOWAIT writes blocking on extent locks and waiting for IO A RWF_NOWAIT write is not supposed to wait on filesystem locks that can be held for a long time or for ongoing IO to complete. However when calling check_can_nocow(), if the inode has prealloc extents or has the NOCOW flag set, we can block on extent (file range) locks through the call to btrfs_lock_and_flush_ordered_range(). Such lock can take a significant amount of time to be available. For example, a fiemap task may be running, and iterating through the entire file range checking all extents and doing backref walking to determine if they are shared, or a readpage operation may be in progress. Also at btrfs_lock_and_flush_ordered_range(), called by check_can_nocow(), after locking the file range we wait for any existing ordered extent that is in progress to complete. Another operation that can take a significant amount of time and defeat the purpose of RWF_NOWAIT. So fix this by trying to lock the file range and if it's currently locked return -EAGAIN to user space. If we are able to lock the file range without waiting and there is an ordered extent in the range, return -EAGAIN as well, instead of waiting for it to complete. Finally, don't bother trying to lock the snapshot lock of the root when attempting a RWF_NOWAIT write, as that is only important for buffered writes. Fixes: edf064e7c6fec3 ("btrfs: nowait aio support") Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/file.c | 39 +++++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 12 deletions(-) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 6d5d905281c6..2520605afc25 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1533,7 +1533,7 @@ lock_and_cleanup_extent_if_need(struct btrfs_inode *inode, struct page **pages, } static noinline int check_can_nocow(struct btrfs_inode *inode, loff_t pos, - size_t *write_bytes) + size_t *write_bytes, bool nowait) { struct btrfs_fs_info *fs_info = inode->root->fs_info; struct btrfs_root *root = inode->root; @@ -1541,27 +1541,43 @@ static noinline int check_can_nocow(struct btrfs_inode *inode, loff_t pos, u64 num_bytes; int ret; - if (!btrfs_drew_try_write_lock(&root->snapshot_lock)) + if (!nowait && !btrfs_drew_try_write_lock(&root->snapshot_lock)) return -EAGAIN; lockstart = round_down(pos, fs_info->sectorsize); lockend = round_up(pos + *write_bytes, fs_info->sectorsize) - 1; - - btrfs_lock_and_flush_ordered_range(inode, lockstart, - lockend, NULL); - num_bytes = lockend - lockstart + 1; + + if (nowait) { + struct btrfs_ordered_extent *ordered; + + if (!try_lock_extent(&inode->io_tree, lockstart, lockend)) + return -EAGAIN; + + ordered = btrfs_lookup_ordered_range(inode, lockstart, + num_bytes); + if (ordered) { + btrfs_put_ordered_extent(ordered); + ret = -EAGAIN; + goto out_unlock; + } + } else { + btrfs_lock_and_flush_ordered_range(inode, lockstart, + lockend, NULL); + } + ret = can_nocow_extent(&inode->vfs_inode, lockstart, &num_bytes, NULL, NULL, NULL); if (ret <= 0) { ret = 0; - btrfs_drew_write_unlock(&root->snapshot_lock); + if (!nowait) + btrfs_drew_write_unlock(&root->snapshot_lock); } else { *write_bytes = min_t(size_t, *write_bytes , num_bytes - pos + lockstart); } - +out_unlock: unlock_extent(&inode->io_tree, lockstart, lockend); return ret; @@ -1633,7 +1649,7 @@ static noinline ssize_t btrfs_buffered_write(struct kiocb *iocb, if ((BTRFS_I(inode)->flags & (BTRFS_INODE_NODATACOW | BTRFS_INODE_PREALLOC)) && check_can_nocow(BTRFS_I(inode), pos, - &write_bytes) > 0) { + &write_bytes, false) > 0) { /* * For nodata cow case, no need to reserve * data space. @@ -1912,12 +1928,11 @@ static ssize_t btrfs_file_write_iter(struct kiocb *iocb, */ if (!(BTRFS_I(inode)->flags & (BTRFS_INODE_NODATACOW | BTRFS_INODE_PREALLOC)) || - check_can_nocow(BTRFS_I(inode), pos, &nocow_bytes) <= 0) { + check_can_nocow(BTRFS_I(inode), pos, &nocow_bytes, + true) <= 0) { inode_unlock(inode); return -EAGAIN; } - /* check_can_nocow() locks the snapshot lock on success */ - btrfs_drew_write_unlock(&root->snapshot_lock); /* * There are holes in the range or parts of the range that must * be COWed (shared extents, RO block groups, etc), so just bail From b091f7fede97cc64f7aaad3eeb37965aebee3082 Mon Sep 17 00:00:00 2001 From: Waiman Long Date: Tue, 16 Jun 2020 11:31:59 -0400 Subject: [PATCH 118/618] btrfs: use kfree() in btrfs_ioctl_get_subvol_info() In btrfs_ioctl_get_subvol_info(), there is a classic case where kzalloc() was incorrectly paired with kzfree(). According to David Sterba, there isn't any sensitive information in the subvol_info that needs to be cleared before freeing. So kzfree() isn't really needed, use kfree() instead. Signed-off-by: Waiman Long Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 168deb8ef68a..e8f7c5f00894 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2692,7 +2692,7 @@ static int btrfs_ioctl_get_subvol_info(struct file *file, void __user *argp) btrfs_put_root(root); out_free: btrfs_free_path(path); - kzfree(subvol_info); + kfree(subvol_info); return ret; } From 6a9620536ffd287c67997da3bf4a984d33e3a760 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=A9r=C3=B4me=20Pouiller?= Date: Fri, 29 May 2020 14:16:02 +0200 Subject: [PATCH 119/618] staging: wfx: fix AC priority MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In order to work properly all the queues of the device must be filled (the device chooses itself the queue to use depending of AC parameters and other things). It is the job of wfx_tx_queues_get_skb() to choose which queue must be filled. However, the sorting algorithm was inverted, so it prioritized the already filled queue! Consequently, the AC priorities was badly broken. Fixes: 6bf418c50f98a ("staging: wfx: change the way to choose frame to send") Signed-off-by: Jérôme Pouiller Link: https://lore.kernel.org/r/20200529121603.1050891-1-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wfx/queue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/wfx/queue.c b/drivers/staging/wfx/queue.c index 3248ecefda56..75df4aca29ac 100644 --- a/drivers/staging/wfx/queue.c +++ b/drivers/staging/wfx/queue.c @@ -246,7 +246,7 @@ static struct sk_buff *wfx_tx_queues_get_skb(struct wfx_dev *wdev) for (i = 0; i < IEEE80211_NUM_ACS; i++) { sorted_queues[i] = &wdev->tx_queue[i]; for (j = i; j > 0; j--) - if (atomic_read(&sorted_queues[j]->pending_frames) > + if (atomic_read(&sorted_queues[j]->pending_frames) < atomic_read(&sorted_queues[j - 1]->pending_frames)) swap(sorted_queues[j - 1], sorted_queues[j]); } From 8cf509345096340416708d998bbb71a27c883880 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=A9r=C3=B4me=20Pouiller?= Date: Fri, 29 May 2020 14:16:03 +0200 Subject: [PATCH 120/618] staging: wfx: drop useless loop MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It is guarantee that the loop will stop at first iteration. So drop the loop. Fixes: 6bf418c50f98a ("staging: wfx: change the way to choose frame to send") Signed-off-by: Jérôme Pouiller Link: https://lore.kernel.org/r/20200529121603.1050891-2-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wfx/queue.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) diff --git a/drivers/staging/wfx/queue.c b/drivers/staging/wfx/queue.c index 75df4aca29ac..93ea2b72febd 100644 --- a/drivers/staging/wfx/queue.c +++ b/drivers/staging/wfx/queue.c @@ -291,15 +291,12 @@ struct hif_msg *wfx_tx_queues_get(struct wfx_dev *wdev) if (atomic_read(&wdev->tx_lock)) return NULL; - - for (;;) { - skb = wfx_tx_queues_get_skb(wdev); - if (!skb) - return NULL; - skb_queue_tail(&wdev->tx_pending, skb); - wake_up(&wdev->tx_dequeue); - tx_priv = wfx_skb_tx_priv(skb); - tx_priv->xmit_timestamp = ktime_get(); - return (struct hif_msg *)skb->data; - } + skb = wfx_tx_queues_get_skb(wdev); + if (!skb) + return NULL; + skb_queue_tail(&wdev->tx_pending, skb); + wake_up(&wdev->tx_dequeue); + tx_priv = wfx_skb_tx_priv(skb); + tx_priv->xmit_timestamp = ktime_get(); + return (struct hif_msg *)skb->data; } From 29de523a6270a308d12d21f4fecf52dac491e226 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=A9r=C3=B4me=20Pouiller?= Date: Fri, 29 May 2020 14:12:56 +0200 Subject: [PATCH 121/618] staging: wfx: fix coherency of hif_scan() prototype MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The function hif_scan() return the timeout for the completion of the scan request. It is the only function from hif_tx.c that return another thing than just an error code. This behavior is not coherent with the rest of file. Worse, if value returned is positive, the caller can't make say if it is a timeout or the value returned by the hardware. Uniformize API with other HIF functions, only return the error code and pass timeout with parameters. Signed-off-by: Jérôme Pouiller Link: https://lore.kernel.org/r/20200529121256.1045521-1-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wfx/hif_tx.c | 6 ++++-- drivers/staging/wfx/hif_tx.h | 2 +- drivers/staging/wfx/scan.c | 6 +++--- 3 files changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/staging/wfx/hif_tx.c b/drivers/staging/wfx/hif_tx.c index 893b67f2f792..5110f9b93762 100644 --- a/drivers/staging/wfx/hif_tx.c +++ b/drivers/staging/wfx/hif_tx.c @@ -240,7 +240,7 @@ int hif_write_mib(struct wfx_dev *wdev, int vif_id, u16 mib_id, } int hif_scan(struct wfx_vif *wvif, struct cfg80211_scan_request *req, - int chan_start_idx, int chan_num) + int chan_start_idx, int chan_num, int *timeout) { int ret, i; struct hif_msg *hif; @@ -289,11 +289,13 @@ int hif_scan(struct wfx_vif *wvif, struct cfg80211_scan_request *req, tmo_chan_fg = 512 * USEC_PER_TU + body->probe_delay; tmo_chan_fg *= body->num_of_probe_requests; tmo = chan_num * max(tmo_chan_bg, tmo_chan_fg) + 512 * USEC_PER_TU; + if (timeout) + *timeout = usecs_to_jiffies(tmo); wfx_fill_header(hif, wvif->id, HIF_REQ_ID_START_SCAN, buf_len); ret = wfx_cmd_send(wvif->wdev, hif, NULL, 0, false); kfree(hif); - return ret ? ret : usecs_to_jiffies(tmo); + return ret; } int hif_stop_scan(struct wfx_vif *wvif) diff --git a/drivers/staging/wfx/hif_tx.h b/drivers/staging/wfx/hif_tx.h index e9eca9330178..e1da28aef706 100644 --- a/drivers/staging/wfx/hif_tx.h +++ b/drivers/staging/wfx/hif_tx.h @@ -42,7 +42,7 @@ int hif_read_mib(struct wfx_dev *wdev, int vif_id, u16 mib_id, int hif_write_mib(struct wfx_dev *wdev, int vif_id, u16 mib_id, void *buf, size_t buf_size); int hif_scan(struct wfx_vif *wvif, struct cfg80211_scan_request *req80211, - int chan_start, int chan_num); + int chan_start, int chan_num, int *timeout); int hif_stop_scan(struct wfx_vif *wvif); int hif_join(struct wfx_vif *wvif, const struct ieee80211_bss_conf *conf, struct ieee80211_channel *channel, const u8 *ssid, int ssidlen); diff --git a/drivers/staging/wfx/scan.c b/drivers/staging/wfx/scan.c index 57ea9997800b..e9de19784865 100644 --- a/drivers/staging/wfx/scan.c +++ b/drivers/staging/wfx/scan.c @@ -56,10 +56,10 @@ static int send_scan_req(struct wfx_vif *wvif, wfx_tx_lock_flush(wvif->wdev); wvif->scan_abort = false; reinit_completion(&wvif->scan_complete); - timeout = hif_scan(wvif, req, start_idx, i - start_idx); - if (timeout < 0) { + ret = hif_scan(wvif, req, start_idx, i - start_idx, &timeout); + if (ret) { wfx_tx_unlock(wvif->wdev); - return timeout; + return -EIO; } ret = wait_for_completion_timeout(&wvif->scan_complete, timeout); if (req->channels[start_idx]->max_power != wvif->vif->bss_conf.txpower) From b65a2d8c8614386f7e8d38ea150749f8a862f431 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 3 Jun 2020 13:19:58 +0300 Subject: [PATCH 122/618] Staging: rtl8723bs: prevent buffer overflow in update_sta_support_rate() The "ie_len" variable is in the 0-255 range and it comes from the network. If it's over NDIS_802_11_LENGTH_RATES_EX (16) then that will lead to memory corruption. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Signed-off-by: Dan Carpenter Cc: stable Link: https://lore.kernel.org/r/20200603101958.GA1845750@mwanda Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8723bs/core/rtw_wlan_util.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/staging/rtl8723bs/core/rtw_wlan_util.c b/drivers/staging/rtl8723bs/core/rtw_wlan_util.c index 69bcd172b298..a3ea7ce3e12e 100644 --- a/drivers/staging/rtl8723bs/core/rtw_wlan_util.c +++ b/drivers/staging/rtl8723bs/core/rtw_wlan_util.c @@ -1824,12 +1824,14 @@ int update_sta_support_rate(struct adapter *padapter, u8 *pvar_ie, uint var_ie_l pIE = (struct ndis_80211_var_ie *)rtw_get_ie(pvar_ie, _SUPPORTEDRATES_IE_, &ie_len, var_ie_len); if (!pIE) return _FAIL; + if (ie_len > sizeof(pmlmeinfo->FW_sta_info[cam_idx].SupportedRates)) + return _FAIL; memcpy(pmlmeinfo->FW_sta_info[cam_idx].SupportedRates, pIE->data, ie_len); supportRateNum = ie_len; pIE = (struct ndis_80211_var_ie *)rtw_get_ie(pvar_ie, _EXT_SUPPORTEDRATES_IE_, &ie_len, var_ie_len); - if (pIE) + if (pIE && (ie_len <= sizeof(pmlmeinfo->FW_sta_info[cam_idx].SupportedRates) - supportRateNum)) memcpy((pmlmeinfo->FW_sta_info[cam_idx].SupportedRates + supportRateNum), pIE->data, ie_len); return _SUCCESS; From b984b6d8b52372b98cce0a6ff6c2787f50665b87 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 14 Jun 2020 00:30:26 +0200 Subject: [PATCH 123/618] drm: mcde: Fix display initialization problem The following bug appeared in the MCDE driver/display initialization during the recent merge window. First the place we call drm_fbdev_generic_setup() in the wrong place: this needs to be called AFTER calling drm_dev_register() else we get this splat: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at ../drivers/gpu/drm/drm_fb_helper.c:2198 drm_fbdev_generic_setup+0x164/0x1a8 mcde a0350000.mcde: Device has not been registered. Modules linked in: Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x9c/0xb0) [] (dump_stack) from [] (__warn+0xb8/0xd0) [] (__warn) from [] (warn_slowpath_fmt+0x74/0xb8) [] (warn_slowpath_fmt) from [] (drm_fbdev_generic_setup+0x164/0x1a8) [] (drm_fbdev_generic_setup) from [] (mcde_drm_bind+0xc4/0x160) [] (mcde_drm_bind) from [] (try_to_bring_up_master+0x15c/0x1a4) (...) Signed-off-by: Linus Walleij Reviewed-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200613223027.4189309-1-linus.walleij@linaro.org --- drivers/gpu/drm/mcde/mcde_drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/mcde/mcde_drv.c b/drivers/gpu/drm/mcde/mcde_drv.c index 84f3e2dbd77b..80082d6dce3a 100644 --- a/drivers/gpu/drm/mcde/mcde_drv.c +++ b/drivers/gpu/drm/mcde/mcde_drv.c @@ -209,7 +209,6 @@ static int mcde_modeset_init(struct drm_device *drm) drm_mode_config_reset(drm); drm_kms_helper_poll_init(drm); - drm_fbdev_generic_setup(drm, 32); return 0; } @@ -264,6 +263,8 @@ static int mcde_drm_bind(struct device *dev) if (ret < 0) goto unbind; + drm_fbdev_generic_setup(drm, 32); + return 0; unbind: From b48fd568ac649f0fd750e89487eaa4a0ef8d2835 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 14 Jun 2020 00:30:27 +0200 Subject: [PATCH 124/618] drm: mcde: Fix forgotten user of drm->dev_private Unable to handle kernel NULL pointer dereference at virtual address 00000918 pgd = (ptrval) [00000918] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.0-15001-gfa384b50b96b-dirty #514 Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support) PC is at mcde_display_enable+0x78/0x7c0 LR is at mcde_display_enable+0x78/0x7c0 Fix this by using to_mcde() as in other functions. Fixes: fd7ee85cfe7b ("drm/mcde: Don't use drm_device->dev_private") Signed-off-by: Linus Walleij Reviewed-by: Sam Ravnborg Cc: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20200613223027.4189309-2-linus.walleij@linaro.org --- drivers/gpu/drm/mcde/mcde_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/mcde/mcde_display.c b/drivers/gpu/drm/mcde/mcde_display.c index 04e1d38d41f7..08802e5177f6 100644 --- a/drivers/gpu/drm/mcde/mcde_display.c +++ b/drivers/gpu/drm/mcde/mcde_display.c @@ -812,7 +812,7 @@ static void mcde_display_enable(struct drm_simple_display_pipe *pipe, struct drm_crtc *crtc = &pipe->crtc; struct drm_plane *plane = &pipe->plane; struct drm_device *drm = crtc->dev; - struct mcde *mcde = drm->dev_private; + struct mcde *mcde = to_mcde(drm); const struct drm_display_mode *mode = &cstate->mode; struct drm_framebuffer *fb = plane->state->fb; u32 format = fb->format->format; From e571d4ee334719727f22cce30c4c74471d4ef68a Mon Sep 17 00:00:00 2001 From: Christian Brauner Date: Wed, 17 Jun 2020 00:33:12 +0200 Subject: [PATCH 125/618] nsproxy: restore EINVAL for non-namespace file descriptor The LTP testsuite reported a regression where users would now see EBADF returned instead of EINVAL when an fd was passed that referred to an open file but the file was not a nsfd. Fix this by continuing to report EINVAL. Reported-by: kernel test robot Cc: Jan Stancek Cc: Cyril Hrubis Link: https://lore.kernel.org/lkml/20200615085836.GR12456@shao2-debian Fixes: 303cc571d107 ("nsproxy: attach to namespaces via pidfds") Signed-off-by: Christian Brauner --- kernel/nsproxy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/nsproxy.c b/kernel/nsproxy.c index b03df67621d0..cd356630a311 100644 --- a/kernel/nsproxy.c +++ b/kernel/nsproxy.c @@ -531,7 +531,7 @@ SYSCALL_DEFINE2(setns, int, fd, int, flags) } else if (!IS_ERR(pidfd_pid(file))) { err = check_setns_flags(flags); } else { - err = -EBADF; + err = -EINVAL; } if (err) goto out; From 86f56395feb2b106b125c47e72192e37da5dd088 Mon Sep 17 00:00:00 2001 From: Christian Brauner Date: Wed, 17 Jun 2020 00:48:54 +0200 Subject: [PATCH 126/618] tests: test for setns() EINVAL regression Verify that setns() reports EINVAL when an fd is passed that refers to an open file but the file is not a file descriptor useable to interact with namespaces. Cc: Jan Stancek Cc: Cyril Hrubis Link: https://lore.kernel.org/lkml/20200615085836.GR12456@shao2-debian Signed-off-by: Christian Brauner --- tools/testing/selftests/pidfd/pidfd.h | 5 +++++ tools/testing/selftests/pidfd/pidfd_getfd_test.c | 5 ----- tools/testing/selftests/pidfd/pidfd_setns_test.c | 12 ++++++++++++ 3 files changed, 17 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/pidfd/pidfd.h b/tools/testing/selftests/pidfd/pidfd.h index c1921a53dbed..8d728eda783d 100644 --- a/tools/testing/selftests/pidfd/pidfd.h +++ b/tools/testing/selftests/pidfd/pidfd.h @@ -95,4 +95,9 @@ static inline int sys_pidfd_getfd(int pidfd, int fd, int flags) return syscall(__NR_pidfd_getfd, pidfd, fd, flags); } +static inline int sys_memfd_create(const char *name, unsigned int flags) +{ + return syscall(__NR_memfd_create, name, flags); +} + #endif /* __PIDFD_H */ diff --git a/tools/testing/selftests/pidfd/pidfd_getfd_test.c b/tools/testing/selftests/pidfd/pidfd_getfd_test.c index 401a7c1d0312..84b65ecccb04 100644 --- a/tools/testing/selftests/pidfd/pidfd_getfd_test.c +++ b/tools/testing/selftests/pidfd/pidfd_getfd_test.c @@ -34,11 +34,6 @@ static int sys_kcmp(pid_t pid1, pid_t pid2, int type, unsigned long idx1, return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2); } -static int sys_memfd_create(const char *name, unsigned int flags) -{ - return syscall(__NR_memfd_create, name, flags); -} - static int __child(int sk, int memfd) { int ret; diff --git a/tools/testing/selftests/pidfd/pidfd_setns_test.c b/tools/testing/selftests/pidfd/pidfd_setns_test.c index 133ec5b6cda8..9418108eae13 100644 --- a/tools/testing/selftests/pidfd/pidfd_setns_test.c +++ b/tools/testing/selftests/pidfd/pidfd_setns_test.c @@ -470,4 +470,16 @@ TEST_F(current_nsset, no_foul_play) } } +TEST(setns_einval) +{ + int fd; + + fd = sys_memfd_create("rostock", 0); + EXPECT_GT(fd, 0); + + ASSERT_NE(setns(fd, 0), 0); + EXPECT_EQ(errno, EINVAL); + close(fd); +} + TEST_HARNESS_MAIN From 1fbf57d0530217b9f264eedc4867bf91479cdf3c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 10 Jun 2020 10:29:49 +0200 Subject: [PATCH 127/618] dma-direct: re-enable mmap for !CONFIG_MMU nommu configfs can trivially map the coherent allocations to user space, as no actual page table setup is required and the kernel and the user space programs share the same address space. Fixes: 62fcee9a3bd7 ("dma-mapping: remove CONFIG_ARCH_NO_COHERENT_DMA_MMAP") Signed-off-by: Christoph Hellwig Reported-by: dillon min Reviewed-by: Vladimir Murzin Tested-by: dillon min --- kernel/dma/Kconfig | 1 + kernel/dma/direct.c | 14 -------------- 2 files changed, 1 insertion(+), 14 deletions(-) diff --git a/kernel/dma/Kconfig b/kernel/dma/Kconfig index a0ce3c1494fd..14ef8e1bdefe 100644 --- a/kernel/dma/Kconfig +++ b/kernel/dma/Kconfig @@ -71,6 +71,7 @@ config SWIOTLB # in the pagetables # config DMA_NONCOHERENT_MMAP + default y if !MMU bool config DMA_COHERENT_POOL diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c index 0a4881e59aa7..9ec6a5c3fc57 100644 --- a/kernel/dma/direct.c +++ b/kernel/dma/direct.c @@ -459,7 +459,6 @@ int dma_direct_get_sgtable(struct device *dev, struct sg_table *sgt, return ret; } -#ifdef CONFIG_MMU bool dma_direct_can_mmap(struct device *dev) { return dev_is_dma_coherent(dev) || @@ -485,19 +484,6 @@ int dma_direct_mmap(struct device *dev, struct vm_area_struct *vma, return remap_pfn_range(vma, vma->vm_start, pfn + vma->vm_pgoff, user_count << PAGE_SHIFT, vma->vm_page_prot); } -#else /* CONFIG_MMU */ -bool dma_direct_can_mmap(struct device *dev) -{ - return false; -} - -int dma_direct_mmap(struct device *dev, struct vm_area_struct *vma, - void *cpu_addr, dma_addr_t dma_addr, size_t size, - unsigned long attrs) -{ - return -ENXIO; -} -#endif /* CONFIG_MMU */ int dma_direct_supported(struct device *dev, u64 mask) { From 26749b3201ab05e288fbf78fbc8585dfa2da3218 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 15 Jun 2020 08:52:31 +0200 Subject: [PATCH 128/618] dma-direct: mark __dma_direct_alloc_pages static Signed-off-by: Christoph Hellwig --- include/linux/dma-direct.h | 2 -- kernel/dma/direct.c | 2 +- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h index 136f984df0d9..cdfa400f89b3 100644 --- a/include/linux/dma-direct.h +++ b/include/linux/dma-direct.h @@ -77,8 +77,6 @@ void *dma_direct_alloc_pages(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs); void dma_direct_free_pages(struct device *dev, size_t size, void *cpu_addr, dma_addr_t dma_addr, unsigned long attrs); -struct page *__dma_direct_alloc_pages(struct device *dev, size_t size, - gfp_t gfp, unsigned long attrs); int dma_direct_get_sgtable(struct device *dev, struct sg_table *sgt, void *cpu_addr, dma_addr_t dma_addr, size_t size, unsigned long attrs); diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c index 9ec6a5c3fc57..30c41b57acd9 100644 --- a/kernel/dma/direct.c +++ b/kernel/dma/direct.c @@ -109,7 +109,7 @@ static inline bool dma_should_free_from_pool(struct device *dev, return false; } -struct page *__dma_direct_alloc_pages(struct device *dev, size_t size, +static struct page *__dma_direct_alloc_pages(struct device *dev, size_t size, gfp_t gfp, unsigned long attrs) { size_t alloc_size = PAGE_ALIGN(size); From 633d5fce78a61e8727674467944939f55b0bcfab Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Thu, 11 Jun 2020 12:20:28 -0700 Subject: [PATCH 129/618] dma-direct: always align allocation size in dma_direct_alloc_pages() dma_alloc_contiguous() does size >> PAGE_SHIFT and set_memory_decrypted() works at page granularity. It's necessary to page align the allocation size in dma_direct_alloc_pages() for consistent behavior. This also fixes an issue when arch_dma_prep_coherent() is called on an unaligned allocation size for dma_alloc_need_uncached() when CONFIG_DMA_DIRECT_REMAP is disabled but CONFIG_ARCH_HAS_DMA_SET_UNCACHED is enabled. Signed-off-by: David Rientjes Signed-off-by: Christoph Hellwig --- kernel/dma/direct.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c index 30c41b57acd9..c93e3c8e3d01 100644 --- a/kernel/dma/direct.c +++ b/kernel/dma/direct.c @@ -112,11 +112,12 @@ static inline bool dma_should_free_from_pool(struct device *dev, static struct page *__dma_direct_alloc_pages(struct device *dev, size_t size, gfp_t gfp, unsigned long attrs) { - size_t alloc_size = PAGE_ALIGN(size); int node = dev_to_node(dev); struct page *page = NULL; u64 phys_limit; + WARN_ON_ONCE(!PAGE_ALIGNED(size)); + if (attrs & DMA_ATTR_NO_WARN) gfp |= __GFP_NOWARN; @@ -124,14 +125,14 @@ static struct page *__dma_direct_alloc_pages(struct device *dev, size_t size, gfp &= ~__GFP_ZERO; gfp |= dma_direct_optimal_gfp_mask(dev, dev->coherent_dma_mask, &phys_limit); - page = dma_alloc_contiguous(dev, alloc_size, gfp); + page = dma_alloc_contiguous(dev, size, gfp); if (page && !dma_coherent_ok(dev, page_to_phys(page), size)) { - dma_free_contiguous(dev, page, alloc_size); + dma_free_contiguous(dev, page, size); page = NULL; } again: if (!page) - page = alloc_pages_node(node, gfp, get_order(alloc_size)); + page = alloc_pages_node(node, gfp, get_order(size)); if (page && !dma_coherent_ok(dev, page_to_phys(page), size)) { dma_free_contiguous(dev, page, size); page = NULL; @@ -158,8 +159,10 @@ void *dma_direct_alloc_pages(struct device *dev, size_t size, struct page *page; void *ret; + size = PAGE_ALIGN(size); + if (dma_should_alloc_from_pool(dev, gfp, attrs)) { - ret = dma_alloc_from_pool(dev, PAGE_ALIGN(size), &page, gfp); + ret = dma_alloc_from_pool(dev, size, &page, gfp); if (!ret) return NULL; goto done; @@ -183,10 +186,10 @@ void *dma_direct_alloc_pages(struct device *dev, size_t size, dma_alloc_need_uncached(dev, attrs)) || (IS_ENABLED(CONFIG_DMA_REMAP) && PageHighMem(page))) { /* remove any dirty cache lines on the kernel alias */ - arch_dma_prep_coherent(page, PAGE_ALIGN(size)); + arch_dma_prep_coherent(page, size); /* create a coherent mapping */ - ret = dma_common_contiguous_remap(page, PAGE_ALIGN(size), + ret = dma_common_contiguous_remap(page, size, dma_pgprot(dev, PAGE_KERNEL, attrs), __builtin_return_address(0)); if (!ret) From 96a539fa3bb71f443ae08e57b9f63d6e5bb2207c Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Thu, 11 Jun 2020 12:20:29 -0700 Subject: [PATCH 130/618] dma-direct: re-encrypt memory if dma_direct_alloc_pages() fails If arch_dma_set_uncached() fails after memory has been decrypted, it needs to be re-encrypted before freeing. Fixes: fa7e2247c572 ("dma-direct: make uncached_kernel_address more general") Signed-off-by: David Rientjes Signed-off-by: Christoph Hellwig --- kernel/dma/direct.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c index c93e3c8e3d01..80d33f215a2e 100644 --- a/kernel/dma/direct.c +++ b/kernel/dma/direct.c @@ -220,7 +220,7 @@ void *dma_direct_alloc_pages(struct device *dev, size_t size, arch_dma_prep_coherent(page, size); ret = arch_dma_set_uncached(ret, size); if (IS_ERR(ret)) - goto out_free_pages; + goto out_encrypt_pages; } done: if (force_dma_unencrypted(dev)) @@ -228,6 +228,11 @@ void *dma_direct_alloc_pages(struct device *dev, size_t size, else *dma_handle = phys_to_dma(dev, page_to_phys(page)); return ret; + +out_encrypt_pages: + if (force_dma_unencrypted(dev)) + set_memory_encrypted((unsigned long)page_address(page), + 1 << get_order(size)); out_free_pages: dma_free_contiguous(dev, page, size); return NULL; From 56fccf21d1961a06e2a0c96ce446ebf036651062 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Thu, 11 Jun 2020 12:20:30 -0700 Subject: [PATCH 131/618] dma-direct: check return value when encrypting or decrypting memory __change_page_attr() can fail which will cause set_memory_encrypted() and set_memory_decrypted() to return non-zero. If the device requires unencrypted DMA memory and decryption fails, simply free the memory and fail. If attempting to re-encrypt in the failure path and that encryption fails, there is no alternative other than to leak the memory. Fixes: c10f07aa27da ("dma/direct: Handle force decryption for DMA coherent buffers in common code") Signed-off-by: David Rientjes Signed-off-by: Christoph Hellwig --- kernel/dma/direct.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c index 80d33f215a2e..2f69bfdbe315 100644 --- a/kernel/dma/direct.c +++ b/kernel/dma/direct.c @@ -158,6 +158,7 @@ void *dma_direct_alloc_pages(struct device *dev, size_t size, { struct page *page; void *ret; + int err; size = PAGE_ALIGN(size); @@ -210,8 +211,12 @@ void *dma_direct_alloc_pages(struct device *dev, size_t size, } ret = page_address(page); - if (force_dma_unencrypted(dev)) - set_memory_decrypted((unsigned long)ret, 1 << get_order(size)); + if (force_dma_unencrypted(dev)) { + err = set_memory_decrypted((unsigned long)ret, + 1 << get_order(size)); + if (err) + goto out_free_pages; + } memset(ret, 0, size); @@ -230,9 +235,13 @@ void *dma_direct_alloc_pages(struct device *dev, size_t size, return ret; out_encrypt_pages: - if (force_dma_unencrypted(dev)) - set_memory_encrypted((unsigned long)page_address(page), - 1 << get_order(size)); + if (force_dma_unencrypted(dev)) { + err = set_memory_encrypted((unsigned long)page_address(page), + 1 << get_order(size)); + /* If memory cannot be re-encrypted, it must be leaked */ + if (err) + return NULL; + } out_free_pages: dma_free_contiguous(dev, page, size); return NULL; From ff58bbc7b9704a5869204176f804eff57307fef0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 16 Jun 2020 14:09:21 +0200 Subject: [PATCH 132/618] ALSA: usb-audio: Fix potential use-after-free of streams With the recent full-duplex support of implicit feedback streams, an endpoint can be still running after closing the capture stream as long as the playback stream with the sync-endpoint is running. In such a state, the URBs are still be handled and they may call retire_data_urb callback, which tries to transfer the data from the PCM buffer. Since the PCM stream gets closed, this may lead to use-after-free. This patch adds the proper clearance of the callback at stopping the capture stream for addressing the possible UAF above. Fixes: 10ce77e4817f ("ALSA: usb-audio: Add duplex sound support for USB devices using implicit feedback") Link: https://lore.kernel.org/r/20200616120921.12249-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/usb/pcm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 84c0ae431936..a777d36c4f5a 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -1787,6 +1787,7 @@ static int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream return 0; case SNDRV_PCM_TRIGGER_STOP: stop_endpoints(subs); + subs->data_endpoint->retire_data_urb = NULL; subs->running = 0; return 0; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: From cc5277fe66cf3ad68f41f1c539b2ef0d5e432974 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 2 Jun 2020 22:36:11 +0300 Subject: [PATCH 133/618] x86/resctrl: Fix a NULL vs IS_ERR() static checker warning in rdt_cdp_peer_get() The callers don't expect *d_cdp to be set to an error pointer, they only check for NULL. This leads to a static checker warning: arch/x86/kernel/cpu/resctrl/rdtgroup.c:2648 __init_one_rdt_domain() warn: 'd_cdp' could be an error pointer This would not trigger a bug in this specific case because __init_one_rdt_domain() calls it with a valid domain that would not have a negative id and thus not trigger the return of the ERR_PTR(). If this was a negative domain id then the call to rdt_find_domain() in domain_add_cpu() would have returned the ERR_PTR() much earlier and the creation of the domain with an invalid id would have been prevented. Even though a bug is not triggered currently the right and safe thing to do is to set the pointer to NULL because that is what can be checked for when the caller is handling the CDP and non-CDP cases. Fixes: 52eb74339a62 ("x86/resctrl: Fix rdt_find_domain() return value and checks") Signed-off-by: Dan Carpenter Signed-off-by: Borislav Petkov Acked-by: Reinette Chatre Acked-by: Fenghua Yu Link: https://lkml.kernel.org/r/20200602193611.GA190851@mwanda --- arch/x86/kernel/cpu/resctrl/rdtgroup.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c index 23b4b61319d3..3f844f14fc0a 100644 --- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c +++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c @@ -1117,6 +1117,7 @@ static int rdt_cdp_peer_get(struct rdt_resource *r, struct rdt_domain *d, _d_cdp = rdt_find_domain(_r_cdp, d->id, NULL); if (WARN_ON(IS_ERR_OR_NULL(_d_cdp))) { _r_cdp = NULL; + _d_cdp = NULL; ret = -EINVAL; } From da785a87787c97823d12107a4f0ec7adcc2a78d9 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 16 Jun 2020 19:31:39 +0300 Subject: [PATCH 134/618] ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision() time64_t is 64-bit width type, we are not supposed to supply lesser ones as in the case of rpi_firmware_print_firmware_revision() after the commit 4a60f58ee002 ("ARM: bcm2835: Switch to use %ptT"). Use temporary variable of time64_t type to correctly handle lesser types. Fixes: 4a60f58ee002 ("ARM: bcm2835: Switch to use %ptT") Reported-by: Stefan Wahren Reported-by: Nicolas Saenz Julienne Signed-off-by: Andy Shevchenko Revieved-by: Petr Mladek Tested-by: Nicolas Saenz Julienne Signed-off-by: Nicolas Saenz Julienne Cc: Petr Mladek Cc: Steven Rostedt Cc: Sergey Senozhatsky Link: https://lore.kernel.org/r/20200616163139.4229-1-andriy.shevchenko@linux.intel.com --- drivers/firmware/raspberrypi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c index ef8098856a47..625c8fdceabf 100644 --- a/drivers/firmware/raspberrypi.c +++ b/drivers/firmware/raspberrypi.c @@ -181,6 +181,7 @@ EXPORT_SYMBOL_GPL(rpi_firmware_property); static void rpi_firmware_print_firmware_revision(struct rpi_firmware *fw) { + time64_t date_and_time; u32 packet; int ret = rpi_firmware_property(fw, RPI_FIRMWARE_GET_FIRMWARE_REVISION, @@ -189,7 +190,9 @@ rpi_firmware_print_firmware_revision(struct rpi_firmware *fw) if (ret) return; - dev_info(fw->cl.dev, "Attached to firmware from %ptT\n", &packet); + /* This is not compatible with y2038 */ + date_and_time = packet; + dev_info(fw->cl.dev, "Attached to firmware from %ptT\n", &date_and_time); } static void From 1b3bcca2085865c1facfbea9baf2f5cde5dc15e4 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 16 Jun 2020 21:50:30 +0800 Subject: [PATCH 135/618] regulator: mt6358: Remove BROKEN dependency The MFD part is merged into v5.8-rc1, thus remove BROKEN dependency. Signed-off-by: Axel Lin Link: https://lore.kernel.org/r/20200616135030.1163660-1-axel.lin@ingics.com Signed-off-by: Mark Brown --- drivers/regulator/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 8f677f5d79b4..edb1c4f8b496 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -684,7 +684,7 @@ config REGULATOR_MT6323 config REGULATOR_MT6358 tristate "MediaTek MT6358 PMIC" - depends on MFD_MT6397 && BROKEN + depends on MFD_MT6397 help Say y here to select this option to enable the power regulator of MediaTek MT6358 PMIC. From 35700e221b18fa53401e5f315be90af9e0bbcdca Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Tue, 16 Jun 2020 13:30:35 +0200 Subject: [PATCH 136/618] spi: stm32-qspi: Fix error path in case of -EPROBE_DEFER In case of -EPROBE_DEFER, stm32_qspi_release() was called in any case which unregistered driver from pm_runtime framework even if it has not been registered yet to it. This leads to: stm32-qspi 58003000.spi: can't setup spi0.0, status -13 spi_master spi0: spi_device register error /soc/spi@58003000/mx66l51235l@0 spi_master spi0: Failed to create SPI device for /soc/spi@58003000/mx66l51235l@0 stm32-qspi 58003000.spi: can't setup spi0.1, status -13 spi_master spi0: spi_device register error /soc/spi@58003000/mx66l51235l@1 spi_master spi0: Failed to create SPI device for /soc/spi@58003000/mx66l51235l@1 On v5.7 kernel,this issue was not "visible", qspi driver was probed successfully. Fixes: 9d282c17b023 ("spi: stm32-qspi: Add pm_runtime support") Signed-off-by: Patrice Chotard Link: https://lore.kernel.org/r/20200616113035.4514-1-patrice.chotard@st.com Signed-off-by: Mark Brown --- drivers/spi/spi-stm32-qspi.c | 46 ++++++++++++++++++++---------------- 1 file changed, 26 insertions(+), 20 deletions(-) diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c index 3c44bb2fd9b1..a900962b4336 100644 --- a/drivers/spi/spi-stm32-qspi.c +++ b/drivers/spi/spi-stm32-qspi.c @@ -553,20 +553,6 @@ static const struct spi_controller_mem_ops stm32_qspi_mem_ops = { .exec_op = stm32_qspi_exec_op, }; -static void stm32_qspi_release(struct stm32_qspi *qspi) -{ - pm_runtime_get_sync(qspi->dev); - /* disable qspi */ - writel_relaxed(0, qspi->io_base + QSPI_CR); - stm32_qspi_dma_free(qspi); - mutex_destroy(&qspi->lock); - pm_runtime_put_noidle(qspi->dev); - pm_runtime_disable(qspi->dev); - pm_runtime_set_suspended(qspi->dev); - pm_runtime_dont_use_autosuspend(qspi->dev); - clk_disable_unprepare(qspi->clk); -} - static int stm32_qspi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -642,7 +628,7 @@ static int stm32_qspi_probe(struct platform_device *pdev) if (IS_ERR(rstc)) { ret = PTR_ERR(rstc); if (ret == -EPROBE_DEFER) - goto err_qspi_release; + goto err_clk_disable; } else { reset_control_assert(rstc); udelay(2); @@ -653,7 +639,7 @@ static int stm32_qspi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, qspi); ret = stm32_qspi_dma_setup(qspi); if (ret) - goto err_qspi_release; + goto err_dma_free; mutex_init(&qspi->lock); @@ -673,15 +659,26 @@ static int stm32_qspi_probe(struct platform_device *pdev) ret = devm_spi_register_master(dev, ctrl); if (ret) - goto err_qspi_release; + goto err_pm_runtime_free; pm_runtime_mark_last_busy(dev); pm_runtime_put_autosuspend(dev); return 0; -err_qspi_release: - stm32_qspi_release(qspi); +err_pm_runtime_free: + pm_runtime_get_sync(qspi->dev); + /* disable qspi */ + writel_relaxed(0, qspi->io_base + QSPI_CR); + mutex_destroy(&qspi->lock); + pm_runtime_put_noidle(qspi->dev); + pm_runtime_disable(qspi->dev); + pm_runtime_set_suspended(qspi->dev); + pm_runtime_dont_use_autosuspend(qspi->dev); +err_dma_free: + stm32_qspi_dma_free(qspi); +err_clk_disable: + clk_disable_unprepare(qspi->clk); err_master_put: spi_master_put(qspi->ctrl); @@ -692,7 +689,16 @@ static int stm32_qspi_remove(struct platform_device *pdev) { struct stm32_qspi *qspi = platform_get_drvdata(pdev); - stm32_qspi_release(qspi); + pm_runtime_get_sync(qspi->dev); + /* disable qspi */ + writel_relaxed(0, qspi->io_base + QSPI_CR); + stm32_qspi_dma_free(qspi); + mutex_destroy(&qspi->lock); + pm_runtime_put_noidle(qspi->dev); + pm_runtime_disable(qspi->dev); + pm_runtime_set_suspended(qspi->dev); + pm_runtime_dont_use_autosuspend(qspi->dev); + clk_disable_unprepare(qspi->clk); return 0; } From 41d90b0c1108d1e46c48cf79964636c553844f4c Mon Sep 17 00:00:00 2001 From: Arvind Sankar Date: Wed, 17 Jun 2020 09:19:57 -0400 Subject: [PATCH 137/618] efi/x86: Setup stack correctly for efi_pe_entry Commit 17054f492dfd ("efi/x86: Implement mixed mode boot without the handover protocol") introduced a new entry point for the EFI stub to be booted in mixed mode on 32-bit firmware. When entered via efi32_pe_entry, control is first transferred to startup_32 to setup for the switch to long mode, and then the EFI stub proper is entered via efi_pe_entry. efi_pe_entry is an MS ABI function, and the ABI requires 32 bytes of shadow stack space to be allocated by the caller, as well as the stack being aligned to 8 mod 16 on entry. Allocate 40 bytes on the stack before switching to 64-bit mode when calling efi_pe_entry to account for this. For robustness, explicitly align boot_stack_end to 16 bytes. It is currently implicitly aligned since .bss is cacheline-size aligned, head_64.o is the first object file with a .bss section, and the heap and boot sizes are aligned. Fixes: 17054f492dfd ("efi/x86: Implement mixed mode boot without the handover protocol") Signed-off-by: Arvind Sankar Link: https://lore.kernel.org/r/20200617131957.2507632-1-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel --- arch/x86/boot/compressed/head_64.S | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index e821a7d7d5c4..97d37f0a34f5 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -213,7 +213,6 @@ SYM_FUNC_START(startup_32) * We place all of the values on our mini stack so lret can * used to perform that far jump. */ - pushl $__KERNEL_CS leal startup_64(%ebp), %eax #ifdef CONFIG_EFI_MIXED movl efi32_boot_args(%ebp), %edi @@ -224,11 +223,20 @@ SYM_FUNC_START(startup_32) movl efi32_boot_args+8(%ebp), %edx // saved bootparams pointer cmpl $0, %edx jnz 1f + /* + * efi_pe_entry uses MS calling convention, which requires 32 bytes of + * shadow space on the stack even if all arguments are passed in + * registers. We also need an additional 8 bytes for the space that + * would be occupied by the return address, and this also results in + * the correct stack alignment for entry. + */ + subl $40, %esp leal efi_pe_entry(%ebp), %eax movl %edi, %ecx // MS calling convention movl %esi, %edx 1: #endif + pushl $__KERNEL_CS pushl %eax /* Enter paged protected Mode, activating Long Mode */ @@ -784,6 +792,7 @@ SYM_DATA_LOCAL(boot_heap, .fill BOOT_HEAP_SIZE, 1, 0) SYM_DATA_START_LOCAL(boot_stack) .fill BOOT_STACK_SIZE, 1, 0 + .balign 16 SYM_DATA_END_LABEL(boot_stack, SYM_L_LOCAL, boot_stack_end) /* From 62956be8f95b93e9f91ffe2e5aa9c0e411af5a14 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Tue, 16 Jun 2020 12:53:30 +0200 Subject: [PATCH 138/618] efi/libstub: arm: Omit arch specific config table matching array on arm64 On arm64, the EFI stub is built into the kernel proper, and so the stub can refer to its symbols directly. Therefore, the practice of using EFI configuration tables to pass information between them is never needed, so we can omit any code consuming such tables when building for arm64. Signed-off-by: Ard Biesheuvel Reviewed-by: Leif Lindholm --- drivers/firmware/efi/arm-init.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/efi/arm-init.c b/drivers/firmware/efi/arm-init.c index c697e70ca7e7..6f4baf70db16 100644 --- a/drivers/firmware/efi/arm-init.c +++ b/drivers/firmware/efi/arm-init.c @@ -62,7 +62,8 @@ static void __init init_screen_info(void) { struct screen_info *si; - if (screen_info_table != EFI_INVALID_TABLE_ADDR) { + if (IS_ENABLED(CONFIG_ARM) && + screen_info_table != EFI_INVALID_TABLE_ADDR) { si = early_memremap_ro(screen_info_table, sizeof(*si)); if (!si) { pr_err("Could not map screen_info config table\n"); @@ -116,7 +117,8 @@ static int __init uefi_init(u64 efi_system_table) goto out; } retval = efi_config_parse_tables(config_tables, systab->nr_tables, - arch_tables); + IS_ENABLED(CONFIG_ARM) ? arch_tables + : NULL); early_memunmap(config_tables, table_size); out: From 2a55280a3675203496d302463b941834228b9875 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Sun, 7 Jun 2020 15:41:35 +0200 Subject: [PATCH 139/618] efi/libstub: arm: Print CPU boot mode and MMU state at boot On 32-bit ARM, we may boot at HYP mode, or with the MMU and caches off (or both), even though the EFI spec does not actually support this. While booting at HYP mode is something we might tolerate, fiddling with the caches is a more serious issue, as disabling the caches is tricky to do safely from C code, and running without the Dcache makes it impossible to support unaligned memory accesses, which is another explicit requirement imposed by the EFI spec. So take note of the CPU mode and MMU state in the EFI stub diagnostic output so that we can easily diagnose any issues that may arise from this. E.g., EFI stub: Entering in SVC mode with MMU enabled Also, capture the CPSR and SCTLR system register values at EFI stub entry, and after ExitBootServices() returns, and check whether the MMU and Dcache were disabled at any point. If this is the case, a diagnostic message like the following will be emitted: efi: [Firmware Bug]: EFI stub was entered with MMU and Dcache disabled, please fix your firmware! efi: CPSR at EFI stub entry : 0x600001d3 efi: SCTLR at EFI stub entry : 0x00c51838 efi: CPSR after ExitBootServices() : 0x600001d3 efi: SCTLR after ExitBootServices(): 0x00c50838 Signed-off-by: Ard Biesheuvel Reviewed-by: Leif Lindholm --- arch/arm/include/asm/efi.h | 7 +++ drivers/firmware/efi/arm-init.c | 34 +++++++++++++- drivers/firmware/efi/libstub/arm32-stub.c | 54 ++++++++++++++++++++++- drivers/firmware/efi/libstub/efi-stub.c | 3 ++ drivers/firmware/efi/libstub/efistub.h | 2 + include/linux/efi.h | 1 + 6 files changed, 98 insertions(+), 3 deletions(-) diff --git a/arch/arm/include/asm/efi.h b/arch/arm/include/asm/efi.h index 84dc0ba822f5..5dcf3c6011b7 100644 --- a/arch/arm/include/asm/efi.h +++ b/arch/arm/include/asm/efi.h @@ -87,4 +87,11 @@ static inline unsigned long efi_get_max_initrd_addr(unsigned long dram_base, return dram_base + SZ_512M; } +struct efi_arm_entry_state { + u32 cpsr_before_ebs; + u32 sctlr_before_ebs; + u32 cpsr_after_ebs; + u32 sctlr_after_ebs; +}; + #endif /* _ASM_ARM_EFI_H */ diff --git a/drivers/firmware/efi/arm-init.c b/drivers/firmware/efi/arm-init.c index 6f4baf70db16..71c445d20258 100644 --- a/drivers/firmware/efi/arm-init.c +++ b/drivers/firmware/efi/arm-init.c @@ -52,9 +52,11 @@ static phys_addr_t __init efi_to_phys(unsigned long addr) } static __initdata unsigned long screen_info_table = EFI_INVALID_TABLE_ADDR; +static __initdata unsigned long cpu_state_table = EFI_INVALID_TABLE_ADDR; static const efi_config_table_type_t arch_tables[] __initconst = { {LINUX_EFI_ARM_SCREEN_INFO_TABLE_GUID, &screen_info_table}, + {LINUX_EFI_ARM_CPU_STATE_TABLE_GUID, &cpu_state_table}, {} }; @@ -240,9 +242,37 @@ void __init efi_init(void) init_screen_info(); +#ifdef CONFIG_ARM /* ARM does not permit early mappings to persist across paging_init() */ - if (IS_ENABLED(CONFIG_ARM)) - efi_memmap_unmap(); + efi_memmap_unmap(); + + if (cpu_state_table != EFI_INVALID_TABLE_ADDR) { + struct efi_arm_entry_state *state; + bool dump_state = true; + + state = early_memremap_ro(cpu_state_table, + sizeof(struct efi_arm_entry_state)); + if (state == NULL) { + pr_warn("Unable to map CPU entry state table.\n"); + return; + } + + if ((state->sctlr_before_ebs & 1) == 0) + pr_warn(FW_BUG "EFI stub was entered with MMU and Dcache disabled, please fix your firmware!\n"); + else if ((state->sctlr_after_ebs & 1) == 0) + pr_warn(FW_BUG "ExitBootServices() returned with MMU and Dcache disabled, please fix your firmware!\n"); + else + dump_state = false; + + if (dump_state || efi_enabled(EFI_DBG)) { + pr_info("CPSR at EFI stub entry : 0x%08x\n", state->cpsr_before_ebs); + pr_info("SCTLR at EFI stub entry : 0x%08x\n", state->sctlr_before_ebs); + pr_info("CPSR after ExitBootServices() : 0x%08x\n", state->cpsr_after_ebs); + pr_info("SCTLR after ExitBootServices(): 0x%08x\n", state->sctlr_after_ebs); + } + early_memunmap(state, sizeof(struct efi_arm_entry_state)); + } +#endif } static bool efifb_overlaps_pci_range(const struct of_pci_range *range) diff --git a/drivers/firmware/efi/libstub/arm32-stub.c b/drivers/firmware/efi/libstub/arm32-stub.c index 40243f524556..d08e5d55838c 100644 --- a/drivers/firmware/efi/libstub/arm32-stub.c +++ b/drivers/firmware/efi/libstub/arm32-stub.c @@ -7,10 +7,49 @@ #include "efistub.h" +static efi_guid_t cpu_state_guid = LINUX_EFI_ARM_CPU_STATE_TABLE_GUID; + +struct efi_arm_entry_state *efi_entry_state; + +static void get_cpu_state(u32 *cpsr, u32 *sctlr) +{ + asm("mrs %0, cpsr" : "=r"(*cpsr)); + if ((*cpsr & MODE_MASK) == HYP_MODE) + asm("mrc p15, 4, %0, c1, c0, 0" : "=r"(*sctlr)); + else + asm("mrc p15, 0, %0, c1, c0, 0" : "=r"(*sctlr)); +} + efi_status_t check_platform_features(void) { + efi_status_t status; + u32 cpsr, sctlr; int block; + get_cpu_state(&cpsr, &sctlr); + + efi_info("Entering in %s mode with MMU %sabled\n", + ((cpsr & MODE_MASK) == HYP_MODE) ? "HYP" : "SVC", + (sctlr & 1) ? "en" : "dis"); + + status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, + sizeof(*efi_entry_state), + (void **)&efi_entry_state); + if (status != EFI_SUCCESS) { + efi_err("allocate_pool() failed\n"); + return status; + } + + efi_entry_state->cpsr_before_ebs = cpsr; + efi_entry_state->sctlr_before_ebs = sctlr; + + status = efi_bs_call(install_configuration_table, &cpu_state_guid, + efi_entry_state); + if (status != EFI_SUCCESS) { + efi_err("install_configuration_table() failed\n"); + goto free_state; + } + /* non-LPAE kernels can run anywhere */ if (!IS_ENABLED(CONFIG_ARM_LPAE)) return EFI_SUCCESS; @@ -19,9 +58,22 @@ efi_status_t check_platform_features(void) block = cpuid_feature_extract(CPUID_EXT_MMFR0, 0); if (block < 5) { efi_err("This LPAE kernel is not supported by your CPU\n"); - return EFI_UNSUPPORTED; + status = EFI_UNSUPPORTED; + goto drop_table; } return EFI_SUCCESS; + +drop_table: + efi_bs_call(install_configuration_table, &cpu_state_guid, NULL); +free_state: + efi_bs_call(free_pool, efi_entry_state); + return status; +} + +void efi_handle_post_ebs_state(void) +{ + get_cpu_state(&efi_entry_state->cpsr_after_ebs, + &efi_entry_state->sctlr_after_ebs); } static efi_guid_t screen_info_guid = LINUX_EFI_ARM_SCREEN_INFO_TABLE_GUID; diff --git a/drivers/firmware/efi/libstub/efi-stub.c b/drivers/firmware/efi/libstub/efi-stub.c index e97370bdfdb0..3318ec3f8e5b 100644 --- a/drivers/firmware/efi/libstub/efi-stub.c +++ b/drivers/firmware/efi/libstub/efi-stub.c @@ -329,6 +329,9 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle, if (status != EFI_SUCCESS) goto fail_free_initrd; + if (IS_ENABLED(CONFIG_ARM)) + efi_handle_post_ebs_state(); + efi_enter_kernel(image_addr, fdt_addr, fdt_totalsize((void *)fdt_addr)); /* not reached */ diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h index ac756f1fdb1a..2c9d42264c29 100644 --- a/drivers/firmware/efi/libstub/efistub.h +++ b/drivers/firmware/efi/libstub/efistub.h @@ -777,4 +777,6 @@ efi_status_t efi_load_initrd(efi_loaded_image_t *image, unsigned long soft_limit, unsigned long hard_limit); +void efi_handle_post_ebs_state(void); + #endif diff --git a/include/linux/efi.h b/include/linux/efi.h index c3449c9699d0..bb35f3305e55 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -350,6 +350,7 @@ void efi_native_runtime_setup(void); * associated with ConOut */ #define LINUX_EFI_ARM_SCREEN_INFO_TABLE_GUID EFI_GUID(0xe03fc20a, 0x85dc, 0x406e, 0xb9, 0x0e, 0x4a, 0xb5, 0x02, 0x37, 0x1d, 0x95) +#define LINUX_EFI_ARM_CPU_STATE_TABLE_GUID EFI_GUID(0xef79e4aa, 0x3c3d, 0x4989, 0xb9, 0x02, 0x07, 0xa9, 0x43, 0xe5, 0x50, 0xd2) #define LINUX_EFI_LOADER_ENTRY_GUID EFI_GUID(0x4a67b082, 0x0a4c, 0x41cf, 0xb6, 0xc7, 0x44, 0x0b, 0x29, 0xbb, 0x8c, 0x4f) #define LINUX_EFI_RANDOM_SEED_TABLE_GUID EFI_GUID(0x1ce1e5bc, 0x7ceb, 0x42f2, 0x81, 0xe5, 0x8a, 0xad, 0xf1, 0x80, 0xf5, 0x7b) #define LINUX_EFI_TPM_EVENT_LOG_GUID EFI_GUID(0xb7799cb0, 0xeca2, 0x4943, 0x96, 0x67, 0x1f, 0xae, 0x07, 0xb7, 0x47, 0xfa) From 22cf8419f1319ff87ec759d0ebdff4cbafaee832 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 16 Jun 2020 16:43:18 -0400 Subject: [PATCH 140/618] nfsd: apply umask on fs without ACL support The server is failing to apply the umask when creating new objects on filesystems without ACL support. To reproduce this, you need to use NFSv4.2 and a client and server recent enough to support umask, and you need to export a filesystem that lacks ACL support (for example, ext4 with the "noacl" mount option). Filesystems with ACL support are expected to take care of the umask themselves (usually by calling posix_acl_create). For filesystems without ACL support, this is up to the caller of vfs_create(), vfs_mknod(), or vfs_mkdir(). Reported-by: Elliott Mitchell Reported-by: Salvatore Bonaccorso Tested-by: Salvatore Bonaccorso Fixes: 47057abde515 ("nfsd: add support for the umask attribute") Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields --- fs/nfsd/vfs.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index c3fbab1753ec..d22a056da477 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -1226,6 +1226,9 @@ nfsd_create_locked(struct svc_rqst *rqstp, struct svc_fh *fhp, iap->ia_mode = 0; iap->ia_mode = (iap->ia_mode & S_IALLUGO) | type; + if (!IS_POSIXACL(dirp)) + iap->ia_mode &= ~current_umask(); + err = 0; host_err = 0; switch (type) { @@ -1458,6 +1461,9 @@ do_nfsd_create(struct svc_rqst *rqstp, struct svc_fh *fhp, goto out; } + if (!IS_POSIXACL(dirp)) + iap->ia_mode &= ~current_umask(); + host_err = vfs_create(dirp, dchild, iap->ia_mode, true); if (host_err < 0) { fh_drop_write(fhp); From b2c22910fe5aae10b7e17b0721e63a3edf0c9553 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Wed, 17 Jun 2020 18:29:02 +0800 Subject: [PATCH 141/618] ALSA: hda/realtek: Add mute LED and micmute LED support for HP systems There are two more HP systems control mute LED from HDA codec and need to expose micmute led class so SoF can control micmute LED. Add quirks to support them. Signed-off-by: Kai-Heng Feng Cc: Link: https://lore.kernel.org/r/20200617102906.16156-2-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 2713560e0c4b..737ef82a75fd 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7471,6 +7471,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x83b9, "HP Spectre x360", ALC269_FIXUP_HP_MUTE_LED_MIC3), SND_PCI_QUIRK(0x103c, 0x8497, "HP Envy x360", ALC269_FIXUP_HP_MUTE_LED_MIC3), SND_PCI_QUIRK(0x103c, 0x84e7, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3), + SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED), + SND_PCI_QUIRK(0x103c, 0x8729, "HP", ALC285_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8736, "HP", ALC285_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x877a, "HP", ALC285_FIXUP_HP_MUTE_LED), SND_PCI_QUIRK(0x103c, 0x877d, "HP", ALC236_FIXUP_HP_MUTE_LED), From 02553b91da5deb63c8562b47529b09b734659af0 Mon Sep 17 00:00:00 2001 From: Andrii Nakryiko Date: Mon, 15 Jun 2020 22:04:30 -0700 Subject: [PATCH 142/618] bpf: bpf_probe_read_kernel_str() has to return amount of data read on success During recent refactorings, bpf_probe_read_kernel_str() started returning 0 on success, instead of amount of data successfully read. This majorly breaks applications relying on bpf_probe_read_kernel_str() and bpf_probe_read_str() and their results. Fix this by returning actual number of bytes read. Fixes: 8d92db5c04d1 ("bpf: rework the compat kernel probe handling") Signed-off-by: Andrii Nakryiko Signed-off-by: Daniel Borkmann Reviewed-by: Christoph Hellwig Acked-by: John Fastabend Link: https://lore.kernel.org/bpf/20200616050432.1902042-1-andriin@fb.com --- kernel/trace/bpf_trace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c index e729c9e587a0..a3ac7de98baa 100644 --- a/kernel/trace/bpf_trace.c +++ b/kernel/trace/bpf_trace.c @@ -241,7 +241,7 @@ bpf_probe_read_kernel_str_common(void *dst, u32 size, const void *unsafe_ptr) if (unlikely(ret < 0)) goto fail; - return 0; + return ret; fail: memset(dst, 0, size); return ret; From 1c7fb20d6b0acd452cb93d447051eac7724edfa7 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Tue, 16 Jun 2020 13:33:03 +0200 Subject: [PATCH 143/618] tools, bpftool: Add ringbuf map type to map command docs Commit c34a06c56df7 ("tools/bpftool: Add ringbuf map to a list of known map types") added the symbolic "ringbuf" name. Document it in the bpftool map command docs and usage as well. Signed-off-by: Tobias Klauser Signed-off-by: Daniel Borkmann Acked-by: Andrii Nakryiko Acked-by: John Fastabend Link: https://lore.kernel.org/bpf/20200616113303.8123-1-tklauser@distanz.ch --- tools/bpf/bpftool/Documentation/bpftool-map.rst | 2 +- tools/bpf/bpftool/map.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/bpf/bpftool/Documentation/bpftool-map.rst b/tools/bpf/bpftool/Documentation/bpftool-map.rst index 31101643e57c..70c78faa47ab 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-map.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-map.rst @@ -49,7 +49,7 @@ MAP COMMANDS | | **lru_percpu_hash** | **lpm_trie** | **array_of_maps** | **hash_of_maps** | | **devmap** | **devmap_hash** | **sockmap** | **cpumap** | **xskmap** | **sockhash** | | **cgroup_storage** | **reuseport_sockarray** | **percpu_cgroup_storage** -| | **queue** | **stack** | **sk_storage** | **struct_ops** } +| | **queue** | **stack** | **sk_storage** | **struct_ops** | **ringbuf** } DESCRIPTION =========== diff --git a/tools/bpf/bpftool/map.c b/tools/bpf/bpftool/map.c index 99109a6afe17..1d3b60651078 100644 --- a/tools/bpf/bpftool/map.c +++ b/tools/bpf/bpftool/map.c @@ -1591,7 +1591,7 @@ static int do_help(int argc, char **argv) " lru_percpu_hash | lpm_trie | array_of_maps | hash_of_maps |\n" " devmap | devmap_hash | sockmap | cpumap | xskmap | sockhash |\n" " cgroup_storage | reuseport_sockarray | percpu_cgroup_storage |\n" - " queue | stack | sk_storage | struct_ops }\n" + " queue | stack | sk_storage | struct_ops | ringbuf }\n" " " HELP_SPEC_OPTIONS "\n" "", bin_name, argv[-2]); From 95b2c3ec4cb1689db2389c251d39f64490ba641c Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 17 Jun 2020 16:21:29 +0100 Subject: [PATCH 144/618] regmap: Fix memory leak from regmap_register_patch When a register patch is registered the reg_sequence is copied but the memory allocated is never freed. Add a kfree in regmap_exit to clean it up. Fixes: 22f0d90a3482 ("regmap: Support register patch sets") Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20200617152129.19655-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown --- drivers/base/regmap/regmap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 183ec789c3fd..06a796821e8b 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -1349,6 +1349,7 @@ void regmap_exit(struct regmap *map) if (map->hwlock) hwspin_lock_free(map->hwlock); kfree_const(map->name); + kfree(map->patch); kfree(map); } EXPORT_SYMBOL_GPL(regmap_exit); From c69cb1d17b6258830b0a97dde73525c1006898f8 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Mon, 8 Jun 2020 13:20:59 +0900 Subject: [PATCH 145/618] dm zoned: fix uninitialized pointer dereference Make sure that the local variable rzone in dmz_do_reclaim() is always initialized before being used for printing debug messages. Fixes: f97809aec589 ("dm zoned: per-device reclaim") Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Signed-off-by: Mike Snitzer --- drivers/md/dm-zoned-reclaim.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/md/dm-zoned-reclaim.c b/drivers/md/dm-zoned-reclaim.c index 2261b4dd60b7..dd1eebf6e50f 100644 --- a/drivers/md/dm-zoned-reclaim.c +++ b/drivers/md/dm-zoned-reclaim.c @@ -377,6 +377,7 @@ static int dmz_do_reclaim(struct dmz_reclaim *zrc) dmz_metadata_label(zmd), zrc->dev_idx); return -EBUSY; } + rzone = dzone; start = jiffies; if (dmz_is_cache(dzone) || dmz_is_rnd(dzone)) { @@ -391,8 +392,6 @@ static int dmz_do_reclaim(struct dmz_reclaim *zrc) */ ret = dmz_reclaim_rnd_data(zrc, dzone); } - rzone = dzone; - } else { struct dm_zone *bzone = dzone->bzone; sector_t chunk_block = 0; @@ -415,7 +414,6 @@ static int dmz_do_reclaim(struct dmz_reclaim *zrc) * be later reclaimed. */ ret = dmz_reclaim_seq_data(zrc, dzone); - rzone = dzone; } } out: From 7b2377486767503d47265e4d487a63c651f6b55d Mon Sep 17 00:00:00 2001 From: Hou Tao Date: Mon, 15 Jun 2020 11:33:23 +0800 Subject: [PATCH 146/618] dm zoned: assign max_io_len correctly The unit of max_io_len is sector instead of byte (spotted through code review), so fix it. Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao Reviewed-by: Damien Le Moal Signed-off-by: Mike Snitzer --- drivers/md/dm-zoned-target.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-zoned-target.c b/drivers/md/dm-zoned-target.c index a907a9446c0b..cf915009c306 100644 --- a/drivers/md/dm-zoned-target.c +++ b/drivers/md/dm-zoned-target.c @@ -890,7 +890,7 @@ static int dmz_ctr(struct dm_target *ti, unsigned int argc, char **argv) } /* Set target (no write same support) */ - ti->max_io_len = dmz_zone_nr_sectors(dmz->metadata) << 9; + ti->max_io_len = dmz_zone_nr_sectors(dmz->metadata); ti->num_flush_bios = 1; ti->num_discard_bios = 1; ti->num_write_zeroes_bios = 1; From 39495b12ef1cf602e6abd350dce2ef4199906531 Mon Sep 17 00:00:00 2001 From: Huaisheng Ye Date: Fri, 12 Jun 2020 23:59:11 +0800 Subject: [PATCH 147/618] dm writecache: correct uncommitted_block when discarding uncommitted entry When uncommitted entry has been discarded, correct wc->uncommitted_block for getting the exact number. Fixes: 48debafe4f2fe ("dm: add writecache target") Cc: stable@vger.kernel.org Signed-off-by: Huaisheng Ye Acked-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- drivers/md/dm-writecache.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/md/dm-writecache.c b/drivers/md/dm-writecache.c index 74f3c506f084..ddff5527dbdf 100644 --- a/drivers/md/dm-writecache.c +++ b/drivers/md/dm-writecache.c @@ -853,6 +853,8 @@ static void writecache_discard(struct dm_writecache *wc, sector_t start, sector_ writecache_wait_for_ios(wc, WRITE); discarded_something = true; } + if (!writecache_entry_is_committed(wc, e)) + wc->uncommitted_blocks--; writecache_free_entry(wc, e); } From a143e172b66d992092eb6cf984f79d6989b684d6 Mon Sep 17 00:00:00 2001 From: Huaisheng Ye Date: Fri, 12 Jun 2020 23:55:44 +0800 Subject: [PATCH 148/618] dm writecache: skip writecache_wait when using pmem mode The array bio_in_progress is only used with ssd mode. So skip writecache_wait_for_ios in writecache_discard when pmem mode. Signed-off-by: Huaisheng Ye Acked-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- drivers/md/dm-writecache.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-writecache.c b/drivers/md/dm-writecache.c index ddff5527dbdf..6b28990b1d84 100644 --- a/drivers/md/dm-writecache.c +++ b/drivers/md/dm-writecache.c @@ -849,8 +849,10 @@ static void writecache_discard(struct dm_writecache *wc, sector_t start, sector_ if (likely(!e->write_in_progress)) { if (!discarded_something) { - writecache_wait_for_ios(wc, READ); - writecache_wait_for_ios(wc, WRITE); + if (!WC_MODE_PMEM(wc)) { + writecache_wait_for_ios(wc, READ); + writecache_wait_for_ios(wc, WRITE); + } discarded_something = true; } if (!writecache_entry_is_committed(wc, e)) From da8996250a7cb9fd6a262dc899258ad0f4021b68 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 17 Jun 2020 12:31:45 -0400 Subject: [PATCH 149/618] dm ioctl: use struct_size() helper in retrieve_deps() One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct dm_target_deps { ... __u64 dev[0]; /* out */ }; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mike Snitzer --- drivers/md/dm-ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index ac83f5002ce5..489935d5f22d 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -1471,7 +1471,7 @@ static void retrieve_deps(struct dm_table *table, /* * Check we have enough space. */ - needed = sizeof(*deps) + (sizeof(*deps->dev) * count); + needed = struct_size(deps, dev, count); if (len < needed) { param->flags |= DM_BUFFER_FULL_FLAG; return; From 3ff2351651a2ecb73ec9d29119793bde190b2850 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Tue, 16 Jun 2020 18:35:18 +0800 Subject: [PATCH 150/618] xdp: Handle frame_sz in xdp_convert_zc_to_xdp_frame() In commit 34cc0b338a61 we only handled the frame_sz in convert_to_xdp_frame(). This patch will also handle frame_sz in xdp_convert_zc_to_xdp_frame(). Fixes: 34cc0b338a61 ("xdp: Xdp_frame add member frame_sz and handle in convert_to_xdp_frame") Signed-off-by: Hangbin Liu Signed-off-by: Alexei Starovoitov Acked-by: Jesper Dangaard Brouer Acked-by: John Fastabend Link: https://lore.kernel.org/bpf/20200616103518.2963410-1-liuhangbin@gmail.com --- net/core/xdp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/xdp.c b/net/core/xdp.c index 90f44f382115..3c45f99e26d5 100644 --- a/net/core/xdp.c +++ b/net/core/xdp.c @@ -462,6 +462,7 @@ struct xdp_frame *xdp_convert_zc_to_xdp_frame(struct xdp_buff *xdp) xdpf->len = totsize - metasize; xdpf->headroom = 0; xdpf->metasize = metasize; + xdpf->frame_sz = PAGE_SIZE; xdpf->mem.type = MEM_TYPE_PAGE_ORDER0; xsk_buff_free(xdp); From 99c51064fb06146b3d494b745c947e438a10aaa7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Toke=20H=C3=B8iland-J=C3=B8rgensen?= Date: Tue, 16 Jun 2020 16:28:29 +0200 Subject: [PATCH 151/618] devmap: Use bpf_map_area_alloc() for allocating hash buckets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Syzkaller discovered that creating a hash of type devmap_hash with a large number of entries can hit the memory allocator limit for allocating contiguous memory regions. There's really no reason to use kmalloc_array() directly in the devmap code, so just switch it to the existing bpf_map_area_alloc() function that is used elsewhere. Fixes: 6f9d451ab1a3 ("xdp: Add devmap_hash map type for looking up devices by hashed index") Reported-by: Xiumei Mu Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: Alexei Starovoitov Acked-by: John Fastabend Link: https://lore.kernel.org/bpf/20200616142829.114173-1-toke@redhat.com --- kernel/bpf/devmap.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/kernel/bpf/devmap.c b/kernel/bpf/devmap.c index 0cbb72cdaf63..5fdbc776a760 100644 --- a/kernel/bpf/devmap.c +++ b/kernel/bpf/devmap.c @@ -86,12 +86,13 @@ static DEFINE_PER_CPU(struct list_head, dev_flush_list); static DEFINE_SPINLOCK(dev_map_lock); static LIST_HEAD(dev_map_list); -static struct hlist_head *dev_map_create_hash(unsigned int entries) +static struct hlist_head *dev_map_create_hash(unsigned int entries, + int numa_node) { int i; struct hlist_head *hash; - hash = kmalloc_array(entries, sizeof(*hash), GFP_KERNEL); + hash = bpf_map_area_alloc(entries * sizeof(*hash), numa_node); if (hash != NULL) for (i = 0; i < entries; i++) INIT_HLIST_HEAD(&hash[i]); @@ -145,7 +146,8 @@ static int dev_map_init_map(struct bpf_dtab *dtab, union bpf_attr *attr) return -EINVAL; if (attr->map_type == BPF_MAP_TYPE_DEVMAP_HASH) { - dtab->dev_index_head = dev_map_create_hash(dtab->n_buckets); + dtab->dev_index_head = dev_map_create_hash(dtab->n_buckets, + dtab->map.numa_node); if (!dtab->dev_index_head) goto free_charge; @@ -232,7 +234,7 @@ static void dev_map_free(struct bpf_map *map) } } - kfree(dtab->dev_index_head); + bpf_map_area_free(dtab->dev_index_head); } else { for (i = 0; i < dtab->map.max_entries; i++) { struct bpf_dtab_netdev *dev; From d8fe449a9c51a37d844ab607e14e2f5c657d3cf2 Mon Sep 17 00:00:00 2001 From: Stanislav Fomichev Date: Tue, 16 Jun 2020 18:04:14 -0700 Subject: [PATCH 152/618] bpf: Don't return EINVAL from {get,set}sockopt when optlen > PAGE_SIZE Attaching to these hooks can break iptables because its optval is usually quite big, or at least bigger than the current PAGE_SIZE limit. David also mentioned some SCTP options can be big (around 256k). For such optvals we expose only the first PAGE_SIZE bytes to the BPF program. BPF program has two options: 1. Set ctx->optlen to 0 to indicate that the BPF's optval should be ignored and the kernel should use original userspace value. 2. Set ctx->optlen to something that's smaller than the PAGE_SIZE. v5: * use ctx->optlen == 0 with trimmed buffer (Alexei Starovoitov) * update the docs accordingly v4: * use temporary buffer to avoid optval == optval_end == NULL; this removes the corner case in the verifier that might assume non-zero PTR_TO_PACKET/PTR_TO_PACKET_END. v3: * don't increase the limit, bypass the argument v2: * proper comments formatting (Jakub Kicinski) Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks") Signed-off-by: Stanislav Fomichev Signed-off-by: Alexei Starovoitov Cc: David Laight Link: https://lore.kernel.org/bpf/20200617010416.93086-1-sdf@google.com --- kernel/bpf/cgroup.c | 53 ++++++++++++++++++++++++++++----------------- 1 file changed, 33 insertions(+), 20 deletions(-) diff --git a/kernel/bpf/cgroup.c b/kernel/bpf/cgroup.c index 4d76f16524cc..ac53102e244a 100644 --- a/kernel/bpf/cgroup.c +++ b/kernel/bpf/cgroup.c @@ -1276,16 +1276,23 @@ static bool __cgroup_bpf_prog_array_is_empty(struct cgroup *cgrp, static int sockopt_alloc_buf(struct bpf_sockopt_kern *ctx, int max_optlen) { - if (unlikely(max_optlen > PAGE_SIZE) || max_optlen < 0) + if (unlikely(max_optlen < 0)) return -EINVAL; + if (unlikely(max_optlen > PAGE_SIZE)) { + /* We don't expose optvals that are greater than PAGE_SIZE + * to the BPF program. + */ + max_optlen = PAGE_SIZE; + } + ctx->optval = kzalloc(max_optlen, GFP_USER); if (!ctx->optval) return -ENOMEM; ctx->optval_end = ctx->optval + max_optlen; - return 0; + return max_optlen; } static void sockopt_free_buf(struct bpf_sockopt_kern *ctx) @@ -1319,13 +1326,13 @@ int __cgroup_bpf_run_filter_setsockopt(struct sock *sk, int *level, */ max_optlen = max_t(int, 16, *optlen); - ret = sockopt_alloc_buf(&ctx, max_optlen); - if (ret) - return ret; + max_optlen = sockopt_alloc_buf(&ctx, max_optlen); + if (max_optlen < 0) + return max_optlen; ctx.optlen = *optlen; - if (copy_from_user(ctx.optval, optval, *optlen) != 0) { + if (copy_from_user(ctx.optval, optval, min(*optlen, max_optlen)) != 0) { ret = -EFAULT; goto out; } @@ -1353,8 +1360,14 @@ int __cgroup_bpf_run_filter_setsockopt(struct sock *sk, int *level, /* export any potential modifications */ *level = ctx.level; *optname = ctx.optname; - *optlen = ctx.optlen; - *kernel_optval = ctx.optval; + + /* optlen == 0 from BPF indicates that we should + * use original userspace data. + */ + if (ctx.optlen != 0) { + *optlen = ctx.optlen; + *kernel_optval = ctx.optval; + } } out: @@ -1385,12 +1398,12 @@ int __cgroup_bpf_run_filter_getsockopt(struct sock *sk, int level, __cgroup_bpf_prog_array_is_empty(cgrp, BPF_CGROUP_GETSOCKOPT)) return retval; - ret = sockopt_alloc_buf(&ctx, max_optlen); - if (ret) - return ret; - ctx.optlen = max_optlen; + max_optlen = sockopt_alloc_buf(&ctx, max_optlen); + if (max_optlen < 0) + return max_optlen; + if (!retval) { /* If kernel getsockopt finished successfully, * copy whatever was returned to the user back @@ -1404,10 +1417,8 @@ int __cgroup_bpf_run_filter_getsockopt(struct sock *sk, int level, goto out; } - if (ctx.optlen > max_optlen) - ctx.optlen = max_optlen; - - if (copy_from_user(ctx.optval, optval, ctx.optlen) != 0) { + if (copy_from_user(ctx.optval, optval, + min(ctx.optlen, max_optlen)) != 0) { ret = -EFAULT; goto out; } @@ -1436,10 +1447,12 @@ int __cgroup_bpf_run_filter_getsockopt(struct sock *sk, int level, goto out; } - if (copy_to_user(optval, ctx.optval, ctx.optlen) || - put_user(ctx.optlen, optlen)) { - ret = -EFAULT; - goto out; + if (ctx.optlen != 0) { + if (copy_to_user(optval, ctx.optval, ctx.optlen) || + put_user(ctx.optlen, optlen)) { + ret = -EFAULT; + goto out; + } } ret = ctx.retval; From a0cb12b03132befbdb29d835ca330c18792e8134 Mon Sep 17 00:00:00 2001 From: Stanislav Fomichev Date: Tue, 16 Jun 2020 18:04:15 -0700 Subject: [PATCH 153/618] selftests/bpf: Make sure optvals > PAGE_SIZE are bypassed We are relying on the fact, that we can pass > sizeof(int) optvals to the SOL_IP+IP_FREEBIND option (the kernel will take first 4 bytes). In the BPF program we check that we can only touch PAGE_SIZE bytes, but the real optlen is PAGE_SIZE * 2. In both cases, we override it to some predefined value and trim the optlen. Also, let's modify exiting IP_TOS usecase to test optlen=0 case where BPF program just bypasses the data as is. Signed-off-by: Stanislav Fomichev Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20200617010416.93086-2-sdf@google.com --- .../selftests/bpf/prog_tests/sockopt_sk.c | 46 +++++++++++++--- .../testing/selftests/bpf/progs/sockopt_sk.c | 54 ++++++++++++++++++- 2 files changed, 91 insertions(+), 9 deletions(-) diff --git a/tools/testing/selftests/bpf/prog_tests/sockopt_sk.c b/tools/testing/selftests/bpf/prog_tests/sockopt_sk.c index 2061a6beac0f..5f54c6aec7f0 100644 --- a/tools/testing/selftests/bpf/prog_tests/sockopt_sk.c +++ b/tools/testing/selftests/bpf/prog_tests/sockopt_sk.c @@ -13,6 +13,7 @@ static int getsetsockopt(void) char cc[16]; /* TCP_CA_NAME_MAX */ } buf = {}; socklen_t optlen; + char *big_buf = NULL; fd = socket(AF_INET, SOCK_STREAM, 0); if (fd < 0) { @@ -22,24 +23,31 @@ static int getsetsockopt(void) /* IP_TOS - BPF bypass */ - buf.u8[0] = 0x08; - err = setsockopt(fd, SOL_IP, IP_TOS, &buf, 1); + optlen = getpagesize() * 2; + big_buf = calloc(1, optlen); + if (!big_buf) { + log_err("Couldn't allocate two pages"); + goto err; + } + + *(int *)big_buf = 0x08; + err = setsockopt(fd, SOL_IP, IP_TOS, big_buf, optlen); if (err) { log_err("Failed to call setsockopt(IP_TOS)"); goto err; } - buf.u8[0] = 0x00; + memset(big_buf, 0, optlen); optlen = 1; - err = getsockopt(fd, SOL_IP, IP_TOS, &buf, &optlen); + err = getsockopt(fd, SOL_IP, IP_TOS, big_buf, &optlen); if (err) { log_err("Failed to call getsockopt(IP_TOS)"); goto err; } - if (buf.u8[0] != 0x08) { - log_err("Unexpected getsockopt(IP_TOS) buf[0] 0x%02x != 0x08", - buf.u8[0]); + if (*(int *)big_buf != 0x08) { + log_err("Unexpected getsockopt(IP_TOS) optval 0x%x != 0x08", + *(int *)big_buf); goto err; } @@ -78,6 +86,28 @@ static int getsetsockopt(void) goto err; } + /* IP_FREEBIND - BPF can't access optval past PAGE_SIZE */ + + optlen = getpagesize() * 2; + memset(big_buf, 0, optlen); + + err = setsockopt(fd, SOL_IP, IP_FREEBIND, big_buf, optlen); + if (err != 0) { + log_err("Failed to call setsockopt, ret=%d", err); + goto err; + } + + err = getsockopt(fd, SOL_IP, IP_FREEBIND, big_buf, &optlen); + if (err != 0) { + log_err("Failed to call getsockopt, ret=%d", err); + goto err; + } + + if (optlen != 1 || *(__u8 *)big_buf != 0x55) { + log_err("Unexpected IP_FREEBIND getsockopt, optlen=%d, optval=0x%x", + optlen, *(__u8 *)big_buf); + } + /* SO_SNDBUF is overwritten */ buf.u32 = 0x01010101; @@ -124,9 +154,11 @@ static int getsetsockopt(void) goto err; } + free(big_buf); close(fd); return 0; err: + free(big_buf); close(fd); return -1; } diff --git a/tools/testing/selftests/bpf/progs/sockopt_sk.c b/tools/testing/selftests/bpf/progs/sockopt_sk.c index d5a5eeb5fb52..712df7b49cb1 100644 --- a/tools/testing/selftests/bpf/progs/sockopt_sk.c +++ b/tools/testing/selftests/bpf/progs/sockopt_sk.c @@ -8,6 +8,10 @@ char _license[] SEC("license") = "GPL"; __u32 _version SEC("version") = 1; +#ifndef PAGE_SIZE +#define PAGE_SIZE 4096 +#endif + #define SOL_CUSTOM 0xdeadbeef struct sockopt_sk { @@ -28,12 +32,14 @@ int _getsockopt(struct bpf_sockopt *ctx) __u8 *optval = ctx->optval; struct sockopt_sk *storage; - if (ctx->level == SOL_IP && ctx->optname == IP_TOS) + if (ctx->level == SOL_IP && ctx->optname == IP_TOS) { /* Not interested in SOL_IP:IP_TOS; * let next BPF program in the cgroup chain or kernel * handle it. */ + ctx->optlen = 0; /* bypass optval>PAGE_SIZE */ return 1; + } if (ctx->level == SOL_SOCKET && ctx->optname == SO_SNDBUF) { /* Not interested in SOL_SOCKET:SO_SNDBUF; @@ -51,6 +57,26 @@ int _getsockopt(struct bpf_sockopt *ctx) return 1; } + if (ctx->level == SOL_IP && ctx->optname == IP_FREEBIND) { + if (optval + 1 > optval_end) + return 0; /* EPERM, bounds check */ + + ctx->retval = 0; /* Reset system call return value to zero */ + + /* Always export 0x55 */ + optval[0] = 0x55; + ctx->optlen = 1; + + /* Userspace buffer is PAGE_SIZE * 2, but BPF + * program can only see the first PAGE_SIZE + * bytes of data. + */ + if (optval_end - optval != PAGE_SIZE) + return 0; /* EPERM, unexpected data size */ + + return 1; + } + if (ctx->level != SOL_CUSTOM) return 0; /* EPERM, deny everything except custom level */ @@ -81,12 +107,14 @@ int _setsockopt(struct bpf_sockopt *ctx) __u8 *optval = ctx->optval; struct sockopt_sk *storage; - if (ctx->level == SOL_IP && ctx->optname == IP_TOS) + if (ctx->level == SOL_IP && ctx->optname == IP_TOS) { /* Not interested in SOL_IP:IP_TOS; * let next BPF program in the cgroup chain or kernel * handle it. */ + ctx->optlen = 0; /* bypass optval>PAGE_SIZE */ return 1; + } if (ctx->level == SOL_SOCKET && ctx->optname == SO_SNDBUF) { /* Overwrite SO_SNDBUF value */ @@ -112,6 +140,28 @@ int _setsockopt(struct bpf_sockopt *ctx) return 1; } + if (ctx->level == SOL_IP && ctx->optname == IP_FREEBIND) { + /* Original optlen is larger than PAGE_SIZE. */ + if (ctx->optlen != PAGE_SIZE * 2) + return 0; /* EPERM, unexpected data size */ + + if (optval + 1 > optval_end) + return 0; /* EPERM, bounds check */ + + /* Make sure we can trim the buffer. */ + optval[0] = 0; + ctx->optlen = 1; + + /* Usepace buffer is PAGE_SIZE * 2, but BPF + * program can only see the first PAGE_SIZE + * bytes of data. + */ + if (optval_end - optval != PAGE_SIZE) + return 0; /* EPERM, unexpected data size */ + + return 1; + } + if (ctx->level != SOL_CUSTOM) return 0; /* EPERM, deny everything except custom level */ From 8030e250d882db174cbcd88273570ffb36a13080 Mon Sep 17 00:00:00 2001 From: Stanislav Fomichev Date: Tue, 16 Jun 2020 18:04:16 -0700 Subject: [PATCH 154/618] bpf: Document optval > PAGE_SIZE behavior for sockopt hooks Extend existing doc with more details about requiring ctx->optlen = 0 for handling optval > PAGE_SIZE. Signed-off-by: Stanislav Fomichev Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20200617010416.93086-3-sdf@google.com --- Documentation/bpf/prog_cgroup_sockopt.rst | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/Documentation/bpf/prog_cgroup_sockopt.rst b/Documentation/bpf/prog_cgroup_sockopt.rst index c47d974629ae..172f957204bf 100644 --- a/Documentation/bpf/prog_cgroup_sockopt.rst +++ b/Documentation/bpf/prog_cgroup_sockopt.rst @@ -86,6 +86,20 @@ then the next program in the chain (A) will see those changes, *not* the original input ``setsockopt`` arguments. The potentially modified values will be then passed down to the kernel. +Large optval +============ +When the ``optval`` is greater than the ``PAGE_SIZE``, the BPF program +can access only the first ``PAGE_SIZE`` of that data. So it has to options: + +* Set ``optlen`` to zero, which indicates that the kernel should + use the original buffer from the userspace. Any modifications + done by the BPF program to the ``optval`` are ignored. +* Set ``optlen`` to the value less than ``PAGE_SIZE``, which + indicates that the kernel should use BPF's trimmed ``optval``. + +When the BPF program returns with the ``optlen`` greater than +``PAGE_SIZE``, the userspace will receive ``EFAULT`` errno. + Example ======= From 4228668eb936357657046b486207b167caea5175 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Wed, 17 Jun 2020 11:47:53 -0500 Subject: [PATCH 155/618] ASoC: Intel: SOF: merge COMETLAKE_LP and COMETLAKE_H We already have two configurations for CometLake, and a third one coming. On other platforms, we used a single Kconfig option, so we should follow the same trend by merging the two cases in a backwards compatible way. The backwards compatibility is handled by overloading the COMETLAKE_LP kconfig as COMETLAKE. In practice we've never seen a case where COMETLAKE_H is not selected along with COMETLAKE_LP, so keeping one of the two is enough. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Guennadi Liakhovetski Reviewed-by: Kai Vehmanen Link: https://lore.kernel.org/r/20200617164755.18104-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/hda/intel-dsp-config.c | 4 +--- sound/soc/intel/boards/Kconfig | 4 ++-- sound/soc/sof/intel/Kconfig | 29 ++++++++--------------------- sound/soc/sof/sof-pci-dev.c | 12 ++++-------- 4 files changed, 15 insertions(+), 34 deletions(-) diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c index be1df80ed013..5df0d2253844 100644 --- a/sound/hda/intel-dsp-config.c +++ b/sound/hda/intel-dsp-config.c @@ -192,8 +192,8 @@ static const struct config_entry config_table[] = { }, #endif +#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE) /* Cometlake-LP */ -#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE_LP) { .flags = FLAG_SOF, .device = 0x02c8, @@ -211,9 +211,7 @@ static const struct config_entry config_table[] = { .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC, .device = 0x02c8, }, -#endif /* Cometlake-H */ -#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE_H) { .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC, .device = 0x06c8, diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig index a2a5798c9139..5dc489a79454 100644 --- a/sound/soc/intel/boards/Kconfig +++ b/sound/soc/intel/boards/Kconfig @@ -492,7 +492,7 @@ config SND_SOC_INTEL_SOF_PCM512x_MACH endif ## SND_SOC_SOF_HDA_LINK || SND_SOC_SOF_BAYTRAIL -if (SND_SOC_SOF_COMETLAKE_LP && SND_SOC_SOF_HDA_LINK) +if (SND_SOC_SOF_COMETLAKE && SND_SOC_SOF_HDA_LINK) config SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH tristate "CML_LP with DA7219 and MAX98357A in I2S Mode" @@ -520,7 +520,7 @@ config SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH Say Y if you have such a device. If unsure select "N". -endif ## SND_SOC_SOF_COMETLAKE_LP && SND_SOC_SOF_HDA_LINK +endif ## SND_SOC_SOF_COMETLAKE && SND_SOC_SOF_HDA_LINK if SND_SOC_SOF_JASPERLAKE diff --git a/sound/soc/sof/intel/Kconfig b/sound/soc/sof/intel/Kconfig index c9a2bee4b55c..3aaf25e4f766 100644 --- a/sound/soc/sof/intel/Kconfig +++ b/sound/soc/sof/intel/Kconfig @@ -25,8 +25,7 @@ config SND_SOC_SOF_INTEL_PCI select SND_SOC_SOF_CANNONLAKE if SND_SOC_SOF_CANNONLAKE_SUPPORT select SND_SOC_SOF_COFFEELAKE if SND_SOC_SOF_COFFEELAKE_SUPPORT select SND_SOC_SOF_ICELAKE if SND_SOC_SOF_ICELAKE_SUPPORT - select SND_SOC_SOF_COMETLAKE_LP if SND_SOC_SOF_COMETLAKE_LP_SUPPORT - select SND_SOC_SOF_COMETLAKE_H if SND_SOC_SOF_COMETLAKE_H_SUPPORT + select SND_SOC_SOF_COMETLAKE if SND_SOC_SOF_COMETLAKE_SUPPORT select SND_SOC_SOF_TIGERLAKE if SND_SOC_SOF_TIGERLAKE_SUPPORT select SND_SOC_SOF_ELKHARTLAKE if SND_SOC_SOF_ELKHARTLAKE_SUPPORT select SND_SOC_SOF_JASPERLAKE if SND_SOC_SOF_JASPERLAKE_SUPPORT @@ -201,34 +200,22 @@ config SND_SOC_SOF_ICELAKE This option is not user-selectable but automagically handled by 'select' statements at a higher level -config SND_SOC_SOF_COMETLAKE_LP +config SND_SOC_SOF_COMETLAKE tristate select SND_SOC_SOF_HDA_COMMON help This option is not user-selectable but automagically handled by 'select' statements at a higher level +config SND_SOC_SOF_COMETLAKE_SUPPORT + bool + config SND_SOC_SOF_COMETLAKE_LP_SUPPORT - bool "SOF support for CometLake-LP" + bool "SOF support for CometLake" + select SND_SOC_SOF_COMETLAKE_SUPPORT help This adds support for Sound Open Firmware for Intel(R) platforms - using the Cometlake-LP processors. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_SOF_COMETLAKE_H - tristate - select SND_SOC_SOF_HDA_COMMON - help - This option is not user-selectable but automagically handled by - 'select' statements at a higher level - -config SND_SOC_SOF_COMETLAKE_H_SUPPORT - bool "SOF support for CometLake-H" - help - This adds support for Sound Open Firmware for Intel(R) platforms - using the Cometlake-H processors. - Say Y if you have such a device. + using the Cometlake processors. If unsure select "N". config SND_SOC_SOF_TIGERLAKE_SUPPORT diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c index b13697dab7c0..7b5f6e17b05f 100644 --- a/sound/soc/sof/sof-pci-dev.c +++ b/sound/soc/sof/sof-pci-dev.c @@ -151,9 +151,7 @@ static const struct sof_dev_desc cfl_desc = { }; #endif -#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE_LP) || \ - IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE_H) - +#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE) static const struct sof_dev_desc cml_desc = { .machines = snd_soc_acpi_intel_cml_machines, .alt_machines = snd_soc_acpi_intel_cml_sdw_machines, @@ -420,12 +418,10 @@ static const struct pci_device_id sof_pci_ids[] = { { PCI_DEVICE(0x8086, 0x4dc8), .driver_data = (unsigned long)&jsl_desc}, #endif -#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE_LP) - { PCI_DEVICE(0x8086, 0x02c8), +#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE) + { PCI_DEVICE(0x8086, 0x02c8), /* CML-LP */ .driver_data = (unsigned long)&cml_desc}, -#endif -#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE_H) - { PCI_DEVICE(0x8086, 0x06c8), + { PCI_DEVICE(0x8086, 0x06c8), /* CML-H */ .driver_data = (unsigned long)&cml_desc}, #endif #if IS_ENABLED(CONFIG_SND_SOC_SOF_TIGERLAKE) From 258fb4f4c34a0db9d3834aba6784d7b322176bb9 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Wed, 17 Jun 2020 11:47:54 -0500 Subject: [PATCH 156/618] ASoC: SOF: Intel: add PCI ID for CometLake-S Mirror ID added for legacy HDaudio Signed-off-by: Pierre-Louis Bossart Reviewed-by: Guennadi Liakhovetski Reviewed-by: Kai Vehmanen Link: https://lore.kernel.org/r/20200617164755.18104-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/sof-pci-dev.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c index 7b5f6e17b05f..f3cb2db67130 100644 --- a/sound/soc/sof/sof-pci-dev.c +++ b/sound/soc/sof/sof-pci-dev.c @@ -423,6 +423,8 @@ static const struct pci_device_id sof_pci_ids[] = { .driver_data = (unsigned long)&cml_desc}, { PCI_DEVICE(0x8086, 0x06c8), /* CML-H */ .driver_data = (unsigned long)&cml_desc}, + { PCI_DEVICE(0x8086, 0xa3f0), /* CML-S */ + .driver_data = (unsigned long)&cml_desc}, #endif #if IS_ENABLED(CONFIG_SND_SOC_SOF_TIGERLAKE) { PCI_DEVICE(0x8086, 0xa0c8), From c8d2e2bfaeffa0f914330e8b4e45b986c8d30b58 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Wed, 17 Jun 2020 11:47:55 -0500 Subject: [PATCH 157/618] ASoC: SOF: Intel: add PCI IDs for ICL-H and TGL-H Usually the DSP is not traditionally enabled on H skews but this might be used moving forward. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Guennadi Liakhovetski Reviewed-by: Kai Vehmanen Link: https://lore.kernel.org/r/20200617164755.18104-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/sof-pci-dev.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c index f3cb2db67130..aa3532ba1434 100644 --- a/sound/soc/sof/sof-pci-dev.c +++ b/sound/soc/sof/sof-pci-dev.c @@ -409,8 +409,11 @@ static const struct pci_device_id sof_pci_ids[] = { .driver_data = (unsigned long)&cfl_desc}, #endif #if IS_ENABLED(CONFIG_SND_SOC_SOF_ICELAKE) - { PCI_DEVICE(0x8086, 0x34C8), + { PCI_DEVICE(0x8086, 0x34C8), /* ICL-LP */ .driver_data = (unsigned long)&icl_desc}, + { PCI_DEVICE(0x8086, 0x3dc8), /* ICL-H */ + .driver_data = (unsigned long)&icl_desc}, + #endif #if IS_ENABLED(CONFIG_SND_SOC_SOF_JASPERLAKE) { PCI_DEVICE(0x8086, 0x38c8), @@ -427,8 +430,11 @@ static const struct pci_device_id sof_pci_ids[] = { .driver_data = (unsigned long)&cml_desc}, #endif #if IS_ENABLED(CONFIG_SND_SOC_SOF_TIGERLAKE) - { PCI_DEVICE(0x8086, 0xa0c8), + { PCI_DEVICE(0x8086, 0xa0c8), /* TGL-LP */ .driver_data = (unsigned long)&tgl_desc}, + { PCI_DEVICE(0x8086, 0x43c8), /* TGL-H */ + .driver_data = (unsigned long)&tgl_desc}, + #endif #if IS_ENABLED(CONFIG_SND_SOC_SOF_ELKHARTLAKE) { PCI_DEVICE(0x8086, 0x4b55), From a94eaccefea1186947c5c5451fcae2245dd7e714 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Wed, 17 Jun 2020 11:41:44 -0500 Subject: [PATCH 158/618] ASoC: hdac_hda: fix memleak with regmap not freed on remove kmemleak throws error reports on module load/unload tests, add snd_hdac_regmap_exit() in .remove(). While we are at it, also fix the error handling flow in .probe() to use snd_hdac_regmap_exit() if needed. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Daniel Baluta Reviewed-by: Kai Vehmanen Reviewed-by: Rander Wang Reviewed-by: Guennadi Liakhovetski Reviewed-by: Bard Liao Link: https://lore.kernel.org/r/20200617164144.17859-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/codecs/hdac_hda.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/hdac_hda.c b/sound/soc/codecs/hdac_hda.c index de003acb1951..473efe9ef998 100644 --- a/sound/soc/codecs/hdac_hda.c +++ b/sound/soc/codecs/hdac_hda.c @@ -441,13 +441,13 @@ static int hdac_hda_codec_probe(struct snd_soc_component *component) ret = snd_hda_codec_set_name(hcodec, hcodec->preset->name); if (ret < 0) { dev_err(&hdev->dev, "name failed %s\n", hcodec->preset->name); - goto error; + goto error_pm; } ret = snd_hdac_regmap_init(&hcodec->core); if (ret < 0) { dev_err(&hdev->dev, "regmap init failed\n"); - goto error; + goto error_pm; } patch = (hda_codec_patch_t)hcodec->preset->driver_data; @@ -455,7 +455,7 @@ static int hdac_hda_codec_probe(struct snd_soc_component *component) ret = patch(hcodec); if (ret < 0) { dev_err(&hdev->dev, "patch failed %d\n", ret); - goto error; + goto error_regmap; } } else { dev_dbg(&hdev->dev, "no patch file found\n"); @@ -467,7 +467,7 @@ static int hdac_hda_codec_probe(struct snd_soc_component *component) ret = snd_hda_codec_parse_pcms(hcodec); if (ret < 0) { dev_err(&hdev->dev, "unable to map pcms to dai %d\n", ret); - goto error; + goto error_regmap; } /* HDMI controls need to be created in machine drivers */ @@ -476,7 +476,7 @@ static int hdac_hda_codec_probe(struct snd_soc_component *component) if (ret < 0) { dev_err(&hdev->dev, "unable to create controls %d\n", ret); - goto error; + goto error_regmap; } } @@ -496,7 +496,9 @@ static int hdac_hda_codec_probe(struct snd_soc_component *component) return 0; -error: +error_regmap: + snd_hdac_regmap_exit(hdev); +error_pm: pm_runtime_put(&hdev->dev); error_no_pm: snd_hdac_ext_bus_link_put(hdev->bus, hlink); @@ -518,6 +520,8 @@ static void hdac_hda_codec_remove(struct snd_soc_component *component) pm_runtime_disable(&hdev->dev); snd_hdac_ext_bus_link_put(hdev->bus, hlink); + + snd_hdac_regmap_exit(hdev); } static const struct snd_soc_dapm_route hdac_hda_dapm_routes[] = { From ac4e106d8934a5894811fc263f4b03fc8ed0fb7a Mon Sep 17 00:00:00 2001 From: Matthew Hagan Date: Sun, 14 Jun 2020 15:19:00 -0700 Subject: [PATCH 159/618] ARM: dts: NSP: Correct FA2 mailbox node The FA2 mailbox is specified at 0x18025000 but should actually be 0x18025c00, length 0x400 according to socregs_nsp.h and board_bu.c. Also the interrupt was off by one and should be GIC SPI 151 instead of 150. Fixes: 17d517172300 ("ARM: dts: NSP: Add mailbox (PDC) to NSP") Signed-off-by: Matthew Hagan Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-nsp.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 920c0f561e5c..3175266ede64 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -259,10 +259,10 @@ amac2: ethernet@24000 { status = "disabled"; }; - mailbox: mailbox@25000 { + mailbox: mailbox@25c00 { compatible = "brcm,iproc-fa2-mbox"; - reg = <0x25000 0x445>; - interrupts = ; + reg = <0x25c00 0x400>; + interrupts = ; #mbox-cells = <1>; brcm,rx-status-len = <32>; brcm,use-bcm-hdr; From 5c5866c593bbd444d0339ede6a8fb5f14ff66d72 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 16 Jun 2020 15:26:36 -0600 Subject: [PATCH 160/618] vfio/pci: Clear error and request eventfd ctx after releasing The next use of the device will generate an underflow from the stale reference. Cc: Qian Cai Fixes: 1518ac272e78 ("vfio/pci: fix memory leaks of eventfd ctx") Reported-by: Daniel Wagner Reviewed-by: Cornelia Huck Tested-by: Daniel Wagner Signed-off-by: Alex Williamson --- drivers/vfio/pci/vfio_pci.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c index 7c0779018b1b..f634c81998bb 100644 --- a/drivers/vfio/pci/vfio_pci.c +++ b/drivers/vfio/pci/vfio_pci.c @@ -521,10 +521,14 @@ static void vfio_pci_release(void *device_data) vfio_pci_vf_token_user_add(vdev, -1); vfio_spapr_pci_eeh_release(vdev->pdev); vfio_pci_disable(vdev); - if (vdev->err_trigger) + if (vdev->err_trigger) { eventfd_ctx_put(vdev->err_trigger); - if (vdev->req_trigger) + vdev->err_trigger = NULL; + } + if (vdev->req_trigger) { eventfd_ctx_put(vdev->req_trigger); + vdev->req_trigger = NULL; + } } mutex_unlock(&vdev->reflck->lock); From aadf9dcef9d4cd68c73a4ab934f93319c4becc47 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Jun 2020 22:50:33 +0100 Subject: [PATCH 161/618] rxrpc: Fix trace string The trace symbol printer (__print_symbolic()) ignores symbols that map to an empty string and prints the hex value instead. Fix the symbol for rxrpc_cong_no_change to " -" instead of "" to avoid this. Fixes: b54a134a7de4 ("rxrpc: Fix handling of enums-to-string translation in tracing") Signed-off-by: David Howells --- include/trace/events/rxrpc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/trace/events/rxrpc.h b/include/trace/events/rxrpc.h index ba9efdc848f9..059b6e45a028 100644 --- a/include/trace/events/rxrpc.h +++ b/include/trace/events/rxrpc.h @@ -400,7 +400,7 @@ enum rxrpc_tx_point { EM(rxrpc_cong_begin_retransmission, " Retrans") \ EM(rxrpc_cong_cleared_nacks, " Cleared") \ EM(rxrpc_cong_new_low_nack, " NewLowN") \ - EM(rxrpc_cong_no_change, "") \ + EM(rxrpc_cong_no_change, " -") \ EM(rxrpc_cong_progress, " Progres") \ EM(rxrpc_cong_retransmit_again, " ReTxAgn") \ EM(rxrpc_cong_rtt_window_end, " RttWinE") \ From e869e7a17798d85829fa7d4f9bbe1eebd4b2d3f6 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Mon, 15 Jun 2020 10:54:56 +0800 Subject: [PATCH 162/618] net: usb: ax88179_178a: fix packet alignment padding Using a AX88179 device (0b95:1790), I see two bytes of appended data on every RX packet. For example, this 48-byte ping, using 0xff as a payload byte: 04:20:22.528472 IP 192.168.1.1 > 192.168.1.2: ICMP echo request, id 2447, seq 1, length 64 0x0000: 000a cd35 ea50 000a cd35 ea4f 0800 4500 0x0010: 0054 c116 4000 4001 f63e c0a8 0101 c0a8 0x0020: 0102 0800 b633 098f 0001 87ea cd5e 0000 0x0030: 0000 dcf2 0600 0000 0000 ffff ffff ffff 0x0040: ffff ffff ffff ffff ffff ffff ffff ffff 0x0050: ffff ffff ffff ffff ffff ffff ffff ffff 0x0060: ffff 961f Those last two bytes - 96 1f - aren't part of the original packet. In the ax88179 RX path, the usbnet rx_fixup function trims a 2-byte 'alignment pseudo header' from the start of the packet, and sets the length from a per-packet field populated by hardware. It looks like that length field *includes* the 2-byte header; the current driver assumes that it's excluded. This change trims the 2-byte alignment header after we've set the packet length, so the resulting packet length is correct. While we're moving the comment around, this also fixes the spelling of 'pseudo'. Signed-off-by: Jeremy Kerr Signed-off-by: David S. Miller --- drivers/net/usb/ax88179_178a.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 950711448f39..a38e868e44d4 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -1491,10 +1491,10 @@ static int ax88179_rx_fixup(struct usbnet *dev, struct sk_buff *skb) } if (pkt_cnt == 0) { - /* Skip IP alignment psudo header */ - skb_pull(skb, 2); skb->len = pkt_len; - skb_set_tail_pointer(skb, pkt_len); + /* Skip IP alignment pseudo header */ + skb_pull(skb, 2); + skb_set_tail_pointer(skb, skb->len); skb->truesize = pkt_len + sizeof(struct sk_buff); ax88179_rx_checksum(skb, pkt_hdr); return 1; @@ -1503,8 +1503,9 @@ static int ax88179_rx_fixup(struct usbnet *dev, struct sk_buff *skb) ax_skb = skb_clone(skb, GFP_ATOMIC); if (ax_skb) { ax_skb->len = pkt_len; - ax_skb->data = skb->data + 2; - skb_set_tail_pointer(ax_skb, pkt_len); + /* Skip IP alignment pseudo header */ + skb_pull(ax_skb, 2); + skb_set_tail_pointer(ax_skb, ax_skb->len); ax_skb->truesize = pkt_len + sizeof(struct sk_buff); ax88179_rx_checksum(ax_skb, pkt_hdr); usbnet_skb_return(dev, ax_skb); From a2ad7c21ad8cf1ce4ad65e13df1c2a1c29b38ac5 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Jun 2020 23:01:23 +0100 Subject: [PATCH 163/618] rxrpc: Fix handling of rwind from an ACK packet The handling of the receive window size (rwind) from a received ACK packet is not correct. The rxrpc_input_ackinfo() function currently checks the current Tx window size against the rwind from the ACK to see if it has changed, but then limits the rwind size before storing it in the tx_winsize member and, if it increased, wake up the transmitting process. This means that if rwind > RXRPC_RXTX_BUFF_SIZE - 1, this path will always be followed. Fix this by limiting rwind before we compare it to tx_winsize. The effect of this can be seen by enabling the rxrpc_rx_rwind_change tracepoint. Fixes: 702f2ac87a9a ("rxrpc: Wake up the transmitter if Rx window size increases on the peer") Signed-off-by: David Howells --- net/rxrpc/input.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c index 299ac98e9754..767579328a06 100644 --- a/net/rxrpc/input.c +++ b/net/rxrpc/input.c @@ -722,13 +722,12 @@ static void rxrpc_input_ackinfo(struct rxrpc_call *call, struct sk_buff *skb, ntohl(ackinfo->rxMTU), ntohl(ackinfo->maxMTU), rwind, ntohl(ackinfo->jumbo_max)); + if (rwind > RXRPC_RXTX_BUFF_SIZE - 1) + rwind = RXRPC_RXTX_BUFF_SIZE - 1; if (call->tx_winsize != rwind) { - if (rwind > RXRPC_RXTX_BUFF_SIZE - 1) - rwind = RXRPC_RXTX_BUFF_SIZE - 1; if (rwind > call->tx_winsize) wake = true; - trace_rxrpc_rx_rwind_change(call, sp->hdr.serial, - ntohl(ackinfo->rwind), wake); + trace_rxrpc_rx_rwind_change(call, sp->hdr.serial, rwind, wake); call->tx_winsize = rwind; } From 02c28dffb13abbaaedece1e4a6493b48ad3f913a Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Jun 2020 15:46:33 +0100 Subject: [PATCH 164/618] rxrpc: Fix afs large storage transmission performance drop Commit 2ad6691d988c, which moved the modification of the status annotation for a packet in the Tx buffer prior to the retransmission moved the state clearance, but managed to lose the bit that set it to UNACK. Consequently, if a retransmission occurs, the packet is accidentally changed to the ACK state (ie. 0) by masking it off, which means that the packet isn't counted towards the tally of newly-ACK'd packets if it gets hard-ACK'd. This then prevents the congestion control algorithm from recovering properly. Fix by reinstating the change of state to UNACK. Spotted by the generic/460 xfstest. Fixes: 2ad6691d988c ("rxrpc: Fix race between incoming ACK parser and retransmitter") Signed-off-by: David Howells --- net/rxrpc/call_event.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/rxrpc/call_event.c b/net/rxrpc/call_event.c index aa1c8eee6557..6be2672a65ea 100644 --- a/net/rxrpc/call_event.c +++ b/net/rxrpc/call_event.c @@ -253,7 +253,7 @@ static void rxrpc_resend(struct rxrpc_call *call, unsigned long now_j) * confuse things */ annotation &= ~RXRPC_TX_ANNO_MASK; - annotation |= RXRPC_TX_ANNO_RESENT; + annotation |= RXRPC_TX_ANNO_UNACK | RXRPC_TX_ANNO_RESENT; call->rxtx_annotations[ix] = annotation; skb = call->rxtx_buffer[ix]; From 3103b6feb4454646558eedc50ece728bc469f341 Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Mon, 15 Jun 2020 18:14:59 -0700 Subject: [PATCH 165/618] ionic: no link check while resetting queues If the driver is busy resetting queues after a change in MTU or queue parameters, don't bother checking the link, wait until the next watchdog cycle. Fixes: 987c0871e8ae ("ionic: check for linkup in watchdog") Signed-off-by: Shannon Nelson Acked-by: Jonathan Toppins Signed-off-by: David S. Miller --- drivers/net/ethernet/pensando/ionic/ionic_lif.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c index 9d8c969f21cb..bfadc4934702 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c @@ -96,7 +96,8 @@ static void ionic_link_status_check(struct ionic_lif *lif) u16 link_status; bool link_up; - if (!test_bit(IONIC_LIF_F_LINK_CHECK_REQUESTED, lif->state)) + if (!test_bit(IONIC_LIF_F_LINK_CHECK_REQUESTED, lif->state) || + test_bit(IONIC_LIF_F_QUEUE_RESET, lif->state)) return; link_status = le16_to_cpu(lif->info->status.link_status); From ef7232da6bcd4294cbb2d424bc35885721570f01 Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Tue, 16 Jun 2020 08:06:26 -0700 Subject: [PATCH 166/618] ionic: export features for vlans to use Set up vlan_features for use by any vlans above us. Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support") Signed-off-by: Shannon Nelson Acked-by: Jonathan Toppins Signed-off-by: David S. Miller --- drivers/net/ethernet/pensando/ionic/ionic_lif.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c index bfadc4934702..8f29ef133743 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c @@ -1246,6 +1246,7 @@ static int ionic_init_nic_features(struct ionic_lif *lif) netdev->hw_features |= netdev->hw_enc_features; netdev->features |= netdev->hw_features; + netdev->vlan_features |= netdev->features & ~NETIF_F_VLAN_FEATURES; netdev->priv_flags |= IFF_UNICAST_FLT | IFF_LIVE_ADDR_CHANGE; From 34c86f4c4a7be3b3e35aa48bd18299d4c756064d Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 8 Jun 2020 16:48:43 +1000 Subject: [PATCH 167/618] crypto: af_alg - fix use-after-free in af_alg_accept() due to bh_lock_sock() The locking in af_alg_release_parent is broken as the BH socket lock can only be taken if there is a code-path to handle the case where the lock is owned by process-context. Instead of adding such handling, we can fix this by changing the ref counts to atomic_t. This patch also modifies the main refcnt to include both normal and nokey sockets. This way we don't have to fudge the nokey ref count when a socket changes from nokey to normal. Credits go to Mauricio Faria de Oliveira who diagnosed this bug and sent a patch for it: https://lore.kernel.org/linux-crypto/20200605161657.535043-1-mfo@canonical.com/ Reported-by: Brian Moyles Reported-by: Mauricio Faria de Oliveira Fixes: 37f96694cf73 ("crypto: af_alg - Use bh_lock_sock in...") Cc: Signed-off-by: Herbert Xu --- crypto/af_alg.c | 26 +++++++++++--------------- crypto/algif_aead.c | 9 +++------ crypto/algif_hash.c | 9 +++------ crypto/algif_skcipher.c | 9 +++------ include/crypto/if_alg.h | 4 ++-- 5 files changed, 22 insertions(+), 35 deletions(-) diff --git a/crypto/af_alg.c b/crypto/af_alg.c index b1cd3535c525..28fc323e3fe3 100644 --- a/crypto/af_alg.c +++ b/crypto/af_alg.c @@ -128,21 +128,15 @@ EXPORT_SYMBOL_GPL(af_alg_release); void af_alg_release_parent(struct sock *sk) { struct alg_sock *ask = alg_sk(sk); - unsigned int nokey = ask->nokey_refcnt; - bool last = nokey && !ask->refcnt; + unsigned int nokey = atomic_read(&ask->nokey_refcnt); sk = ask->parent; ask = alg_sk(sk); - local_bh_disable(); - bh_lock_sock(sk); - ask->nokey_refcnt -= nokey; - if (!last) - last = !--ask->refcnt; - bh_unlock_sock(sk); - local_bh_enable(); + if (nokey) + atomic_dec(&ask->nokey_refcnt); - if (last) + if (atomic_dec_and_test(&ask->refcnt)) sock_put(sk); } EXPORT_SYMBOL_GPL(af_alg_release_parent); @@ -187,7 +181,7 @@ static int alg_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) err = -EBUSY; lock_sock(sk); - if (ask->refcnt | ask->nokey_refcnt) + if (atomic_read(&ask->refcnt)) goto unlock; swap(ask->type, type); @@ -236,7 +230,7 @@ static int alg_setsockopt(struct socket *sock, int level, int optname, int err = -EBUSY; lock_sock(sk); - if (ask->refcnt) + if (atomic_read(&ask->refcnt) != atomic_read(&ask->nokey_refcnt)) goto unlock; type = ask->type; @@ -301,12 +295,14 @@ int af_alg_accept(struct sock *sk, struct socket *newsock, bool kern) if (err) goto unlock; - if (nokey || !ask->refcnt++) + if (atomic_inc_return_relaxed(&ask->refcnt) == 1) sock_hold(sk); - ask->nokey_refcnt += nokey; + if (nokey) { + atomic_inc(&ask->nokey_refcnt); + atomic_set(&alg_sk(sk2)->nokey_refcnt, 1); + } alg_sk(sk2)->parent = sk; alg_sk(sk2)->type = type; - alg_sk(sk2)->nokey_refcnt = nokey; newsock->ops = type->ops; newsock->state = SS_CONNECTED; diff --git a/crypto/algif_aead.c b/crypto/algif_aead.c index eb1910b6d434..0ae000a61c7f 100644 --- a/crypto/algif_aead.c +++ b/crypto/algif_aead.c @@ -384,7 +384,7 @@ static int aead_check_key(struct socket *sock) struct alg_sock *ask = alg_sk(sk); lock_sock(sk); - if (ask->refcnt) + if (!atomic_read(&ask->nokey_refcnt)) goto unlock_child; psk = ask->parent; @@ -396,11 +396,8 @@ static int aead_check_key(struct socket *sock) if (crypto_aead_get_flags(tfm->aead) & CRYPTO_TFM_NEED_KEY) goto unlock; - if (!pask->refcnt++) - sock_hold(psk); - - ask->refcnt = 1; - sock_put(psk); + atomic_dec(&pask->nokey_refcnt); + atomic_set(&ask->nokey_refcnt, 0); err = 0; diff --git a/crypto/algif_hash.c b/crypto/algif_hash.c index da1ffa4f7f8d..e71727c25a7d 100644 --- a/crypto/algif_hash.c +++ b/crypto/algif_hash.c @@ -301,7 +301,7 @@ static int hash_check_key(struct socket *sock) struct alg_sock *ask = alg_sk(sk); lock_sock(sk); - if (ask->refcnt) + if (!atomic_read(&ask->nokey_refcnt)) goto unlock_child; psk = ask->parent; @@ -313,11 +313,8 @@ static int hash_check_key(struct socket *sock) if (crypto_ahash_get_flags(tfm) & CRYPTO_TFM_NEED_KEY) goto unlock; - if (!pask->refcnt++) - sock_hold(psk); - - ask->refcnt = 1; - sock_put(psk); + atomic_dec(&pask->nokey_refcnt); + atomic_set(&ask->nokey_refcnt, 0); err = 0; diff --git a/crypto/algif_skcipher.c b/crypto/algif_skcipher.c index 4c3bdffe0c3a..ec5567c87a6d 100644 --- a/crypto/algif_skcipher.c +++ b/crypto/algif_skcipher.c @@ -211,7 +211,7 @@ static int skcipher_check_key(struct socket *sock) struct alg_sock *ask = alg_sk(sk); lock_sock(sk); - if (ask->refcnt) + if (!atomic_read(&ask->nokey_refcnt)) goto unlock_child; psk = ask->parent; @@ -223,11 +223,8 @@ static int skcipher_check_key(struct socket *sock) if (crypto_skcipher_get_flags(tfm) & CRYPTO_TFM_NEED_KEY) goto unlock; - if (!pask->refcnt++) - sock_hold(psk); - - ask->refcnt = 1; - sock_put(psk); + atomic_dec(&pask->nokey_refcnt); + atomic_set(&ask->nokey_refcnt, 0); err = 0; diff --git a/include/crypto/if_alg.h b/include/crypto/if_alg.h index 56527c85d122..088c1ded2714 100644 --- a/include/crypto/if_alg.h +++ b/include/crypto/if_alg.h @@ -29,8 +29,8 @@ struct alg_sock { struct sock *parent; - unsigned int refcnt; - unsigned int nokey_refcnt; + atomic_t refcnt; + atomic_t nokey_refcnt; const struct af_alg_type *type; void *private; From e04ec0de61c1eb9693179093e83ab8ca68a30d08 Mon Sep 17 00:00:00 2001 From: Daniel Jordan Date: Mon, 8 Jun 2020 17:26:52 -0400 Subject: [PATCH 168/618] padata: upgrade smp_mb__after_atomic to smp_mb in padata_do_serial A 5.7 kernel hangs during a tcrypt test of padata that waits for an AEAD request to finish. This is only seen on large machines running many concurrent requests. The issue is that padata never serializes the request. The removal of the reorder_objects atomic missed that the memory barrier in padata_do_serial() depends on it. Upgrade the barrier from smp_mb__after_atomic to smp_mb to get correct ordering again. Fixes: 3facced7aeed1 ("padata: remove reorder_objects") Signed-off-by: Daniel Jordan Cc: Steffen Klassert Cc: linux-kernel@vger.kernel.org Cc: Signed-off-by: Herbert Xu --- kernel/padata.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/padata.c b/kernel/padata.c index 29fc5d87a4cd..4373f7adaa40 100644 --- a/kernel/padata.c +++ b/kernel/padata.c @@ -335,7 +335,7 @@ static void padata_reorder(struct parallel_data *pd) * * Ensure reorder queue is read after pd->lock is dropped so we see * new objects from another task in padata_do_serial. Pairs with - * smp_mb__after_atomic in padata_do_serial. + * smp_mb in padata_do_serial. */ smp_mb(); @@ -418,7 +418,7 @@ void padata_do_serial(struct padata_priv *padata) * with the trylock of pd->lock in padata_reorder. Pairs with smp_mb * in padata_reorder. */ - smp_mb__after_atomic(); + smp_mb(); padata_reorder(pd); } From 4fd6b5735c03c0955d93960d31f17d7144f5578f Mon Sep 17 00:00:00 2001 From: Robin Gong Date: Fri, 22 May 2020 18:44:50 +0800 Subject: [PATCH 169/618] arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range Correct ldo1 voltage range from wrong high group(3.0V~3.3V) to low group (1.6V~1.9V) because the ldo1 should be 1.8V. Actually, two voltage groups have been supported at bd718x7-regulator driver, hence, just corrrect the voltage range to 1.6V~3.3V. For ldo2@0.8V, correct voltage range too. Otherwise, ldo1 would be kept @3.0V and ldo2@0.9V which violate i.mx8mm datasheet as the below warning log in kernel: [ 0.995524] LDO1: Bringing 1800000uV into 3000000-3000000uV [ 0.999196] LDO2: Bringing 800000uV into 900000-900000uV Fixes: 78cc25fa265d ("arm64: dts: imx8mm-evk: Add BD71847 PMIC") Cc: stable@vger.kernel.org Signed-off-by: Robin Gong Reviewed-by: Dong Aisheng Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts index e5ec8322796d..0f1d7f8aeac4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts @@ -208,7 +208,7 @@ buck6_reg: BUCK6 { ldo1_reg: LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <3000000>; + regulator-min-microvolt = <1600000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; @@ -216,7 +216,7 @@ ldo1_reg: LDO1 { ldo2_reg: LDO2 { regulator-name = "LDO2"; - regulator-min-microvolt = <900000>; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; regulator-boot-on; regulator-always-on; From cfb12c8952f617df58d73d24161e539a035d82b0 Mon Sep 17 00:00:00 2001 From: Robin Gong Date: Fri, 22 May 2020 18:44:51 +0800 Subject: [PATCH 170/618] arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range Correct ldo1 voltage range from wrong high group(3.0V~3.3V) to low group (1.6V~1.9V) because the ldo1 should be 1.8V. Actually, two voltage groups have been supported at bd718x7-regulator driver, hence, just corrrect the voltage range to 1.6V~3.3V. For ldo2@0.8V, correct voltage range too. Otherwise, ldo1 would be kept @3.0V and ldo2@0.9V which violate i.mx8mn datasheet as the below warning log in kernel: [ 0.995524] LDO1: Bringing 1800000uV into 3000000-3000000uV [ 0.999196] LDO2: Bringing 800000uV into 900000-900000uV Fixes: 3e44dd09736d ("arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support") Cc: stable@vger.kernel.org Signed-off-by: Robin Gong Reviewed-by: Dong Aisheng Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts index d07e0e6a00cc..a1e5483dbbbe 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts @@ -113,7 +113,7 @@ buck6_reg: BUCK6 { ldo1_reg: LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <3000000>; + regulator-min-microvolt = <1600000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; @@ -121,7 +121,7 @@ ldo1_reg: LDO1 { ldo2_reg: LDO2 { regulator-name = "LDO2"; - regulator-min-microvolt = <900000>; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; regulator-boot-on; regulator-always-on; From d50313a5a0d803bcf55121a2b82086633060d05e Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Wed, 17 Jun 2020 11:49:09 -0500 Subject: [PATCH 171/618] ALSA: hda: Intel: add missing PCI IDs for ICL-H, TGL-H and EKL Mirror PCI ids used for SOF. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Guennadi Liakhovetski Reviewed-by: Kai Vehmanen Link: https://lore.kernel.org/r/20200617164909.18225-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 41a03c61a74b..11ec5c56c80e 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2470,6 +2470,9 @@ static const struct pci_device_id azx_ids[] = { /* Icelake */ { PCI_DEVICE(0x8086, 0x34c8), .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, + /* Icelake-H */ + { PCI_DEVICE(0x8086, 0x3dc8), + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, /* Jasperlake */ { PCI_DEVICE(0x8086, 0x38c8), .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, @@ -2478,9 +2481,14 @@ static const struct pci_device_id azx_ids[] = { /* Tigerlake */ { PCI_DEVICE(0x8086, 0xa0c8), .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, + /* Tigerlake-H */ + { PCI_DEVICE(0x8086, 0x43c8), + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, /* Elkhart Lake */ { PCI_DEVICE(0x8086, 0x4b55), .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, + { PCI_DEVICE(0x8086, 0x4b58), + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, /* Broxton-P(Apollolake) */ { PCI_DEVICE(0x8086, 0x5a98), .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_BROXTON }, From 3d19946b509c494672b46143b20d6dd8a02f5bb6 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 29 May 2020 07:42:34 -0300 Subject: [PATCH 172/618] Documentation: ABI: usb: chipidea: Update Li Jun's e-mail The freescale.com e-mail domain is no longer active for quite some time. Switch Li Jun's e-mail address to the NXP domain. Signed-off-by: Fabio Estevam Link: https://lore.kernel.org/r/20200529104234.25136-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman --- Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg b/Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg index 151c59578db4..f58cfb06b160 100644 --- a/Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg +++ b/Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg @@ -1,6 +1,6 @@ What: /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req Date: Feb 2014 -Contact: Li Jun +Contact: Li Jun Description: Can be set and read. Set a_bus_req(A-device bus request) input to be 1 if @@ -17,7 +17,7 @@ Description: What: /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop Date: Feb 2014 -Contact: Li Jun +Contact: Li Jun Description: Can be set and read The a_bus_drop(A-device bus drop) input is 1 when the @@ -32,7 +32,7 @@ Description: What: /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req Date: Feb 2014 -Contact: Li Jun +Contact: Li Jun Description: Can be set and read. The b_bus_req(B-device bus request) input is 1 during the time @@ -47,7 +47,7 @@ Description: What: /sys/bus/platform/devices/ci_hdrc.0/inputs/a_clr_err Date: Feb 2014 -Contact: Li Jun +Contact: Li Jun Description: Only can be set. The a_clr_err(A-device Vbus error clear) input is used to clear From 130206a88683d859f63ed6d4a56ab5c2b4930c8e Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Fri, 29 May 2020 16:17:53 +0300 Subject: [PATCH 173/618] usb: typec: mux: intel_pmc_mux: Fix DP alternate mode entry The PMC needs to be notified separately about HPD (hotplug detected) signal being high after mode entry. There is a bit "HPD High" in the Alternate Mode Request that the driver already sets, but that bit is only valid when the DisplayPort Alternate Mode is directly entered from disconnected state. Fixes: 5c4edcdbcd97 ("usb: typec: mux: intel: Fix DP_HPD_LVL bit field") Signed-off-by: Heikki Krogerus Cc: stable Tested-by: Prashant Malani Link: https://lore.kernel.org/r/20200529131753.15587-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/mux/intel_pmc_mux.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c index 962bc69a6a59..70ddc9d6d49e 100644 --- a/drivers/usb/typec/mux/intel_pmc_mux.c +++ b/drivers/usb/typec/mux/intel_pmc_mux.c @@ -148,7 +148,8 @@ pmc_usb_mux_dp_hpd(struct pmc_usb_port *port, struct typec_mux_state *state) msg[0] = PMC_USB_DP_HPD; msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT; - msg[1] = PMC_USB_DP_HPD_IRQ; + if (data->status & DP_STATUS_IRQ_HPD) + msg[1] = PMC_USB_DP_HPD_IRQ; if (data->status & DP_STATUS_HPD_STATE) msg[1] |= PMC_USB_DP_HPD_LVL; @@ -161,6 +162,7 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state) { struct typec_displayport_data *data = state->data; struct altmode_req req = { }; + int ret; if (data->status & DP_STATUS_IRQ_HPD) return pmc_usb_mux_dp_hpd(port, state); @@ -181,7 +183,14 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state) if (data->status & DP_STATUS_HPD_STATE) req.mode_data |= PMC_USB_ALTMODE_HPD_HIGH; - return pmc_usb_command(port, (void *)&req, sizeof(req)); + ret = pmc_usb_command(port, (void *)&req, sizeof(req)); + if (ret) + return ret; + + if (data->status & DP_STATUS_HPD_STATE) + return pmc_usb_mux_dp_hpd(port, state); + + return 0; } static int From 44ed240d62736ad29943ec01e41e194b96f7c5e9 Mon Sep 17 00:00:00 2001 From: Tang Bin Date: Tue, 2 Jun 2020 19:47:08 +0800 Subject: [PATCH 174/618] usb: host: ehci-exynos: Fix error check in exynos_ehci_probe() If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ehci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Fixes: 1bcc5aa87f04 ("USB: Add initial S5P EHCI driver") Cc: stable Signed-off-by: Zhang Shengju Signed-off-by: Tang Bin Link: https://lore.kernel.org/r/20200602114708.28620-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-exynos.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index a4e9abcbdc4f..1a9b7572e17f 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -203,9 +203,8 @@ static int exynos_ehci_probe(struct platform_device *pdev) hcd->rsrc_len = resource_size(res); irq = platform_get_irq(pdev, 0); - if (!irq) { - dev_err(&pdev->dev, "Failed to get IRQ\n"); - err = -ENODEV; + if (irq < 0) { + err = irq; goto fail_io; } From 5d8021923e8a8cc37a421a64e27c7221f0fee33c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Tomasz=20Meresi=C5=84ski?= Date: Wed, 3 Jun 2020 22:33:46 +0200 Subject: [PATCH 175/618] usb: add USB_QUIRK_DELAY_INIT for Logitech C922 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Logitech C922, just like other Logitech webcams, needs the USB_QUIRK_DELAY_INIT or it will randomly not respond after device connection Signed-off-by: Tomasz MeresiÅ„ski Cc: stable Link: https://lore.kernel.org/r/20200603203347.7792-1-tomasz@meresinski.eu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 3e8efe759c3e..e0b77674869c 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -218,11 +218,12 @@ static const struct usb_device_id usb_quirk_list[] = { /* Logitech HD Webcam C270 */ { USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME }, - /* Logitech HD Pro Webcams C920, C920-C, C925e and C930e */ + /* Logitech HD Pro Webcams C920, C920-C, C922, C925e and C930e */ { USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x085b), .driver_info = USB_QUIRK_DELAY_INIT }, + { USB_DEVICE(0x046d, 0x085c), .driver_info = USB_QUIRK_DELAY_INIT }, /* Logitech ConferenceCam CC3000e */ { USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT }, From 207324a321a866401b098cadf19e4a2dd6584622 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Tue, 9 Jun 2020 12:28:11 +0400 Subject: [PATCH 176/618] usb: dwc2: Postponed gadget registration to the udc class driver During dwc2 driver probe, after gadget registration to the udc class driver, if exist any builtin function driver it immediately bound to dwc2 and after init host side (dwc2_hcd_init()) stucked in host mode. Patch postpone gadget registration after host side initialization done. Fixes: 117777b2c3bb9 ("usb: dwc2: Move gadget probe function into platform code") Reported-by: kbuild test robot Tested-by: Marek Vasut Cc: stable Signed-off-by: Minas Harutyunyan Link: https://lore.kernel.org/r/f21cb38fecc72a230b86155d94c7e60c9cb66f58.1591690938.git.hminas@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/gadget.c | 6 ------ drivers/usb/dwc2/platform.c | 11 +++++++++++ 2 files changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 12b98b466287..7faf5f8c056d 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -4920,12 +4920,6 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg) epnum, 0); } - ret = usb_add_gadget_udc(dev, &hsotg->gadget); - if (ret) { - dwc2_hsotg_ep_free_request(&hsotg->eps_out[0]->ep, - hsotg->ctrl_req); - return ret; - } dwc2_hsotg_dump(hsotg); return 0; diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index e571c8ae65ec..c347d93eae64 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -575,6 +575,17 @@ static int dwc2_driver_probe(struct platform_device *dev) if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) dwc2_lowlevel_hw_disable(hsotg); +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ + IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) + /* Postponed adding a new gadget to the udc class driver list */ + if (hsotg->gadget_enabled) { + retval = usb_add_gadget_udc(hsotg->dev, &hsotg->gadget); + if (retval) { + dwc2_hsotg_remove(hsotg); + goto error_init; + } + } +#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */ return 0; error_init: From 28ebeb8db77035e058a510ce9bd17c2b9a009dba Mon Sep 17 00:00:00 2001 From: Zqiang Date: Fri, 12 Jun 2020 11:52:10 +0800 Subject: [PATCH 177/618] usb: usbtest: fix missing kfree(dev->buf) in usbtest_disconnect BUG: memory leak unreferenced object 0xffff888055046e00 (size 256): comm "kworker/2:9", pid 2570, jiffies 4294942129 (age 1095.500s) hex dump (first 32 bytes): 00 70 04 55 80 88 ff ff 18 bb 5a 81 ff ff ff ff .p.U......Z..... f5 96 78 81 ff ff ff ff 37 de 8e 81 ff ff ff ff ..x.....7....... backtrace: [<00000000d121dccf>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<00000000d121dccf>] slab_post_alloc_hook mm/slab.h:586 [inline] [<00000000d121dccf>] slab_alloc_node mm/slub.c:2786 [inline] [<00000000d121dccf>] slab_alloc mm/slub.c:2794 [inline] [<00000000d121dccf>] kmem_cache_alloc_trace+0x15e/0x2d0 mm/slub.c:2811 [<000000005c3c3381>] kmalloc include/linux/slab.h:555 [inline] [<000000005c3c3381>] usbtest_probe+0x286/0x19d0 drivers/usb/misc/usbtest.c:2790 [<000000001cec6910>] usb_probe_interface+0x2bd/0x870 drivers/usb/core/driver.c:361 [<000000007806c118>] really_probe+0x48d/0x8f0 drivers/base/dd.c:551 [<00000000a3308c3e>] driver_probe_device+0xfc/0x2a0 drivers/base/dd.c:724 [<000000003ef66004>] __device_attach_driver+0x1b6/0x240 drivers/base/dd.c:831 [<00000000eee53e97>] bus_for_each_drv+0x14e/0x1e0 drivers/base/bus.c:431 [<00000000bb0648d0>] __device_attach+0x1f9/0x350 drivers/base/dd.c:897 [<00000000838b324a>] device_initial_probe+0x1a/0x20 drivers/base/dd.c:944 [<0000000030d501c1>] bus_probe_device+0x1e1/0x280 drivers/base/bus.c:491 [<000000005bd7adef>] device_add+0x131d/0x1c40 drivers/base/core.c:2504 [<00000000a0937814>] usb_set_configuration+0xe84/0x1ab0 drivers/usb/core/message.c:2030 [<00000000e3934741>] generic_probe+0x6a/0xe0 drivers/usb/core/generic.c:210 [<0000000098ade0f1>] usb_probe_device+0x90/0xd0 drivers/usb/core/driver.c:266 [<000000007806c118>] really_probe+0x48d/0x8f0 drivers/base/dd.c:551 [<00000000a3308c3e>] driver_probe_device+0xfc/0x2a0 drivers/base/dd.c:724 Acked-by: Alan Stern Reported-by: Kyungtae Kim Signed-off-by: Zqiang Link: https://lore.kernel.org/r/20200612035210.20494-1-qiang.zhang@windriver.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbtest.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 98ada1a3425c..bae88893ee8e 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -2873,6 +2873,7 @@ static void usbtest_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); dev_dbg(&intf->dev, "disconnect\n"); + kfree(dev->buf); kfree(dev); } From 1ddcb71a3edf0e1682b6e056158e4c4b00325f66 Mon Sep 17 00:00:00 2001 From: Longfang Liu Date: Mon, 8 Jun 2020 11:46:59 +0800 Subject: [PATCH 178/618] USB: ehci: reopen solution for Synopsys HC bug MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A Synopsys USB2.0 core used in Huawei Kunpeng920 SoC has a bug which might cause the host controller not issuing ping. Bug description: After indicating an Interrupt on Async Advance, the software uses the doorbell mechanism to delete the Next Link queue head of the last executed queue head. At this time, the host controller still references the removed queue head(the queue head is NULL). NULL reference causes the host controller to lose the USB device. Solution: After deleting the Next Link queue head, when has_synopsys_hc_bug set to 1，the software can write one of the valid queue head addresses to the ASYNCLISTADDR register to allow the host controller to get the valid queue head. in order to solve that problem, this patch set the flag for Huawei Kunpeng920 There are detailed instructions and solutions in this patch: commit 2f7ac6c19997 ("USB: ehci: add workaround for Synopsys HC bug") Signed-off-by: Longfang Liu Cc: stable Acked-by: Alan Stern Link: https://lore.kernel.org/r/1591588019-44284-1-git-send-email-liulongfang@huawei.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-pci.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 3c3820ad9092..af3c1b9b38b2 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -216,6 +216,13 @@ static int ehci_pci_setup(struct usb_hcd *hcd) ehci_info(ehci, "applying MosChip frame-index workaround\n"); ehci->frame_index_bug = 1; break; + case PCI_VENDOR_ID_HUAWEI: + /* Synopsys HC bug */ + if (pdev->device == 0xa239) { + ehci_info(ehci, "applying Synopsys HC workaround\n"); + ehci->has_synopsys_hc_bug = 1; + } + break; } /* optional debug port, normally in the first BAR */ From 03894573f2913181ee5aae0089f333b2131f2d4b Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Fri, 5 Jun 2020 12:54:18 +0200 Subject: [PATCH 179/618] cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chip USB_DEVICE(0x0424, 0x274e) can send data before cdc_acm is ready, causing garbage chars on the TTY causing stray input to the shell and/or login prompt. Signed-off-by: Joakim Tjernlund Cc: stable@vger.kernel.org Acked-by: Oliver Neukum Link: https://lore.kernel.org/r/20200605105418.22263-1-joakim.tjernlund@infinera.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index f67088bb8218..d5187b50fc82 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1689,6 +1689,8 @@ static int acm_pre_reset(struct usb_interface *intf) static const struct usb_device_id acm_ids[] = { /* quirky and broken devices */ + { USB_DEVICE(0x0424, 0x274e), /* Microchip Technology, Inc. (formerly SMSC) */ + .driver_info = DISABLE_ECHO, }, /* DISABLE ECHO in termios flag */ { USB_DEVICE(0x076d, 0x0006), /* Denso Cradle CU-321 */ .driver_info = NO_UNION_NORMAL, },/* has no union descriptor */ { USB_DEVICE(0x17ef, 0x7000), /* Lenovo USB modem */ From 07c112fb09c86c0231f6ff0061a000ffe91c8eb9 Mon Sep 17 00:00:00 2001 From: Chuhong Yuan Date: Wed, 10 Jun 2020 10:48:44 +0800 Subject: [PATCH 180/618] USB: ohci-sm501: Add missed iounmap() in remove This driver misses calling iounmap() in remove to undo the ioremap() called in probe. Add the missed call to fix it. Fixes: f54aab6ebcec ("usb: ohci-sm501 driver") Cc: stable Signed-off-by: Chuhong Yuan Acked-by: Alan Stern Link: https://lore.kernel.org/r/20200610024844.3628408-1-hslester96@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-sm501.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c index cff965240327..b91d50da6127 100644 --- a/drivers/usb/host/ohci-sm501.c +++ b/drivers/usb/host/ohci-sm501.c @@ -191,6 +191,7 @@ static int ohci_hcd_sm501_drv_remove(struct platform_device *pdev) struct resource *mem; usb_remove_hcd(hcd); + iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); From 302c570bf36e997d55ad0d60628a2feec76954a4 Mon Sep 17 00:00:00 2001 From: Li Jun Date: Thu, 4 Jun 2020 19:21:18 +0800 Subject: [PATCH 181/618] usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs John reported screaming irq caused by rt1711h when system boot[1], this is because irq request is done before tcpci_register_port(), so the chip->tcpci has not been setup, irq handler is entered but can't do anything, this patch is to address this by moving the irq request after tcpci_register_port(). [1] https://lore.kernel.org/linux-usb/20200530040157.31038-1-john.stultz@linaro.org Fixes: ce08eaeb6388 ("staging: typec: rt1711h typec chip driver") Cc: stable # v4.18+ Cc: John Stultz Reported-and-tested-by: John Stultz Reviewed-by: Guenter Roeck Reviewed-by: Heikki Krogerus Signed-off-by: Li Jun Link: https://lore.kernel.org/r/20200604112118.38062-1-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpci_rt1711h.c | 31 +++++++++----------------- 1 file changed, 10 insertions(+), 21 deletions(-) diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c index 017389021b96..b56a0880a044 100644 --- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c +++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c @@ -179,26 +179,6 @@ static irqreturn_t rt1711h_irq(int irq, void *dev_id) return tcpci_irq(chip->tcpci); } -static int rt1711h_init_alert(struct rt1711h_chip *chip, - struct i2c_client *client) -{ - int ret; - - /* Disable chip interrupts before requesting irq */ - ret = rt1711h_write16(chip, TCPC_ALERT_MASK, 0); - if (ret < 0) - return ret; - - ret = devm_request_threaded_irq(chip->dev, client->irq, NULL, - rt1711h_irq, - IRQF_ONESHOT | IRQF_TRIGGER_LOW, - dev_name(chip->dev), chip); - if (ret < 0) - return ret; - enable_irq_wake(client->irq); - return 0; -} - static int rt1711h_sw_reset(struct rt1711h_chip *chip) { int ret; @@ -260,7 +240,8 @@ static int rt1711h_probe(struct i2c_client *client, if (ret < 0) return ret; - ret = rt1711h_init_alert(chip, client); + /* Disable chip interrupts before requesting irq */ + ret = rt1711h_write16(chip, TCPC_ALERT_MASK, 0); if (ret < 0) return ret; @@ -271,6 +252,14 @@ static int rt1711h_probe(struct i2c_client *client, if (IS_ERR_OR_NULL(chip->tcpci)) return PTR_ERR(chip->tcpci); + ret = devm_request_threaded_irq(chip->dev, client->irq, NULL, + rt1711h_irq, + IRQF_ONESHOT | IRQF_TRIGGER_LOW, + dev_name(chip->dev), chip); + if (ret < 0) + return ret; + enable_irq_wake(client->irq); + return 0; } From f097eb38f71391ff2cf078788bad5a00eb3bd96a Mon Sep 17 00:00:00 2001 From: Kurt Kanzenbach Date: Tue, 9 Jun 2020 10:17:26 +0200 Subject: [PATCH 182/618] timekeeping: Fix kerneldoc system_device_crosststamp & al Make kernel doc comments actually work and fix the syncronized typo. [ tglx: Added the missing /** and fixed up formatting ] Signed-off-by: Kurt Kanzenbach Signed-off-by: Thomas Gleixner Link: https://lkml.kernel.org/r/20200609081726.5657-1-kurt@linutronix.de --- include/linux/timekeeping.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/include/linux/timekeeping.h b/include/linux/timekeeping.h index b27e2ffa96c1..d5471d6fa778 100644 --- a/include/linux/timekeeping.h +++ b/include/linux/timekeeping.h @@ -222,9 +222,9 @@ extern bool timekeeping_rtc_skipresume(void); extern void timekeeping_inject_sleeptime64(const struct timespec64 *delta); -/* +/** * struct system_time_snapshot - simultaneous raw/real time capture with - * counter value + * counter value * @cycles: Clocksource counter value to produce the system times * @real: Realtime system time * @raw: Monotonic raw system time @@ -239,9 +239,9 @@ struct system_time_snapshot { u8 cs_was_changed_seq; }; -/* +/** * struct system_device_crosststamp - system/device cross-timestamp - * (syncronized capture) + * (synchronized capture) * @device: Device time * @sys_realtime: Realtime simultaneous with device time * @sys_monoraw: Monotonic raw simultaneous with device time @@ -252,12 +252,12 @@ struct system_device_crosststamp { ktime_t sys_monoraw; }; -/* +/** * struct system_counterval_t - system counter value with the pointer to the - * corresponding clocksource + * corresponding clocksource * @cycles: System counter value * @cs: Clocksource corresponding to system counter value. Used by - * timekeeping code to verify comparibility of two cycle values + * timekeeping code to verify comparibility of two cycle values */ struct system_counterval_t { u64 cycles; From a13b9d0b97211579ea63b96c606de79b963c0f47 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Mon, 8 Jun 2020 20:15:09 -0700 Subject: [PATCH 183/618] x86/cpu: Use pinning mask for CR4 bits needing to be 0 The X86_CR4_FSGSBASE bit of CR4 should not change after boot[1]. Older kernels should enforce this bit to zero, and newer kernels need to enforce it depending on boot-time configuration (e.g. "nofsgsbase"). To support a pinned bit being either 1 or 0, use an explicit mask in combination with the expected pinned bit values. [1] https://lore.kernel.org/lkml/20200527103147.GI325280@hirez.programming.kicks-ass.net Signed-off-by: Kees Cook Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/202006082013.71E29A42@keescook --- arch/x86/kernel/cpu/common.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 043d93cdcaad..95c090a45b4b 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -347,6 +347,9 @@ static __always_inline void setup_umip(struct cpuinfo_x86 *c) cr4_clear_bits(X86_CR4_UMIP); } +/* These bits should not change their value after CPU init is finished. */ +static const unsigned long cr4_pinned_mask = + X86_CR4_SMEP | X86_CR4_SMAP | X86_CR4_UMIP | X86_CR4_FSGSBASE; static DEFINE_STATIC_KEY_FALSE_RO(cr_pinning); static unsigned long cr4_pinned_bits __ro_after_init; @@ -371,20 +374,20 @@ EXPORT_SYMBOL(native_write_cr0); void native_write_cr4(unsigned long val) { - unsigned long bits_missing = 0; + unsigned long bits_changed = 0; set_register: asm volatile("mov %0,%%cr4": "+r" (val), "+m" (cr4_pinned_bits)); if (static_branch_likely(&cr_pinning)) { - if (unlikely((val & cr4_pinned_bits) != cr4_pinned_bits)) { - bits_missing = ~val & cr4_pinned_bits; - val |= bits_missing; + if (unlikely((val & cr4_pinned_mask) != cr4_pinned_bits)) { + bits_changed = (val & cr4_pinned_mask) ^ cr4_pinned_bits; + val = (val & ~cr4_pinned_mask) | cr4_pinned_bits; goto set_register; } - /* Warn after we've set the missing bits. */ - WARN_ONCE(bits_missing, "CR4 bits went missing: %lx!?\n", - bits_missing); + /* Warn after we've corrected the changed bits. */ + WARN_ONCE(bits_changed, "pinned CR4 bits changed: 0x%lx!?\n", + bits_changed); } } #if IS_MODULE(CONFIG_LKDTM) @@ -419,7 +422,7 @@ void cr4_init(void) if (boot_cpu_has(X86_FEATURE_PCID)) cr4 |= X86_CR4_PCIDE; if (static_branch_likely(&cr_pinning)) - cr4 |= cr4_pinned_bits; + cr4 = (cr4 & ~cr4_pinned_mask) | cr4_pinned_bits; __write_cr4(cr4); @@ -434,10 +437,7 @@ void cr4_init(void) */ static void __init setup_cr_pinning(void) { - unsigned long mask; - - mask = (X86_CR4_SMEP | X86_CR4_SMAP | X86_CR4_UMIP); - cr4_pinned_bits = this_cpu_read(cpu_tlbstate.cr4) & mask; + cr4_pinned_bits = this_cpu_read(cpu_tlbstate.cr4) & cr4_pinned_mask; static_key_enable(&cr_pinning.key); } From 9f7041b71a2f5defc1629368e7dbe83a9c6ea388 Mon Sep 17 00:00:00 2001 From: Ravulapati Vishnu vardhan rao Date: Thu, 18 Jun 2020 12:56:52 +0530 Subject: [PATCH 184/618] ASoC: amd: closing specific instance. The steps to reproduce: Record from the internal mic : (arecord -D hw:1,2 -f dat /dev/null -V stereos) Record from the headphone mic: (arecord -D hw:1,0 -f dat /dev/null -V stereos) Kill the recording from internal mic. We can see the recording from the headphone mic is broken. This patch rectifies the issue reported. Signed-off-by: Ravulapati Vishnu vardhan rao Link: https://lore.kernel.org/r/20200618072653.27103-1-Vishnuvardhanrao.Ravulapati@amd.com Signed-off-by: Mark Brown --- sound/soc/amd/raven/acp3x-pcm-dma.c | 30 ++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-) diff --git a/sound/soc/amd/raven/acp3x-pcm-dma.c b/sound/soc/amd/raven/acp3x-pcm-dma.c index d8f554f369a8..e6386de20ac7 100644 --- a/sound/soc/amd/raven/acp3x-pcm-dma.c +++ b/sound/soc/amd/raven/acp3x-pcm-dma.c @@ -342,11 +342,34 @@ static int acp3x_dma_close(struct snd_soc_component *component, { struct snd_soc_pcm_runtime *prtd; struct i2s_dev_data *adata; + struct i2s_stream_instance *ins; prtd = substream->private_data; component = snd_soc_rtdcom_lookup(prtd, DRV_NAME); adata = dev_get_drvdata(component->dev); + ins = substream->runtime->private_data; + if (!ins) + return -EINVAL; + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + switch (ins->i2s_instance) { + case I2S_BT_INSTANCE: + adata->play_stream = NULL; + break; + case I2S_SP_INSTANCE: + default: + adata->i2ssp_play_stream = NULL; + } + } else { + switch (ins->i2s_instance) { + case I2S_BT_INSTANCE: + adata->capture_stream = NULL; + break; + case I2S_SP_INSTANCE: + default: + adata->i2ssp_capture_stream = NULL; + } + } /* Disable ACP irq, when the current stream is being closed and * another stream is also not active. @@ -354,13 +377,6 @@ static int acp3x_dma_close(struct snd_soc_component *component, if (!adata->play_stream && !adata->capture_stream && !adata->i2ssp_play_stream && !adata->i2ssp_capture_stream) rv_writel(0, adata->acp3x_base + mmACP_EXTERNAL_INTR_ENB); - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - adata->play_stream = NULL; - adata->i2ssp_play_stream = NULL; - } else { - adata->capture_stream = NULL; - adata->i2ssp_capture_stream = NULL; - } return 0; } From 1ea7c546b8b3f27bf7da673c265b09c8f79d11bc Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Thu, 11 Jun 2020 16:00:45 +0300 Subject: [PATCH 185/618] RDMA/core: Annotate CMA unlock helper routine Fix the following sparse error by adding annotation to cm_queue_work_unlock() that it releases cm_id_priv->lock lock. drivers/infiniband/core/cm.c:936:24: warning: context imbalance in 'cm_queue_work_unlock' - unexpected unlock Fixes: e83f195aa45c ("RDMA/cm: Pull duplicated code into cm_queue_work_unlock()") Link: https://lore.kernel.org/r/20200611130045.1994026-1-leon@kernel.org Reported-by: kernel test robot Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/cm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 9ce787e37e22..0d1377232933 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -918,6 +918,7 @@ static void cm_free_work(struct cm_work *work) static void cm_queue_work_unlock(struct cm_id_private *cm_id_priv, struct cm_work *work) + __releases(&cm_id_priv->lock) { bool immediate; From 90a239ee25fa3a483facec3de7c144361a3d3a51 Mon Sep 17 00:00:00 2001 From: Aditya Pakki Date: Sat, 13 Jun 2020 23:11:48 -0500 Subject: [PATCH 186/618] RDMA/rvt: Fix potential memory leak caused by rvt_alloc_rq In case of failure of alloc_ud_wq_attr(), the memory allocated by rvt_alloc_rq() is not freed. Fix it by calling rvt_free_rq() using the existing clean-up code. Fixes: d310c4bf8aea ("IB/{rdmavt, hfi1, qib}: Remove AH refcount for UD QPs") Link: https://lore.kernel.org/r/20200614041148.131983-1-pakki001@umn.edu Signed-off-by: Aditya Pakki Acked-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe --- drivers/infiniband/sw/rdmavt/qp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c index 511b72809e14..7db35dd6ad74 100644 --- a/drivers/infiniband/sw/rdmavt/qp.c +++ b/drivers/infiniband/sw/rdmavt/qp.c @@ -1204,7 +1204,7 @@ struct ib_qp *rvt_create_qp(struct ib_pd *ibpd, err = alloc_ud_wq_attr(qp, rdi->dparms.node); if (err) { ret = (ERR_PTR(err)); - goto bail_driver_priv; + goto bail_rq_rvt; } if (init_attr->create_flags & IB_QP_CREATE_NETDEV_USE) @@ -1314,9 +1314,11 @@ struct ib_qp *rvt_create_qp(struct ib_pd *ibpd, rvt_free_qpn(&rdi->qp_dev->qpn_table, qp->ibqp.qp_num); bail_rq_wq: - rvt_free_rq(&qp->r_rq); free_ud_wq_attr(qp); +bail_rq_rvt: + rvt_free_rq(&qp->r_rq); + bail_driver_priv: rdi->driver_f.qp_priv_free(rdi, qp); From 0133654d8eb8607eacc96badfe49bf992155f4cb Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Sun, 14 Jun 2020 13:35:34 +0300 Subject: [PATCH 187/618] RDMA/efa: Set maximum pkeys device attribute The max_pkeys device attribute was not set in query device verb, set it to one in order to account for the default pkey (0xffff). This information is exposed to userspace and can cause malfunction Fixes: 40909f664d27 ("RDMA/efa: Add EFA verbs implementation") Link: https://lore.kernel.org/r/20200614103534.88060-1-galpress@amazon.com Reviewed-by: Firas JahJah Reviewed-by: Yossi Leybovich Signed-off-by: Gal Pressman Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/efa/efa_verbs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/hw/efa/efa_verbs.c b/drivers/infiniband/hw/efa/efa_verbs.c index 08313f7c73bc..7dd082441333 100644 --- a/drivers/infiniband/hw/efa/efa_verbs.c +++ b/drivers/infiniband/hw/efa/efa_verbs.c @@ -212,6 +212,7 @@ int efa_query_device(struct ib_device *ibdev, props->max_send_sge = dev_attr->max_sq_sge; props->max_recv_sge = dev_attr->max_rq_sge; props->max_sge_rd = dev_attr->max_wr_rdma_sge; + props->max_pkeys = 1; if (udata && udata->outlen) { resp.max_sq_sge = dev_attr->max_sq_sge; From 0dfbd5ecf28cbcb81674c49d34ee97366db1be44 Mon Sep 17 00:00:00 2001 From: Michal Kalderon Date: Tue, 16 Jun 2020 12:34:08 +0300 Subject: [PATCH 188/618] RDMA/qedr: Fix KASAN: use-after-free in ucma_event_handler+0x532 Private data passed to iwarp_cm_handler is copied for connection request / response, but ignored otherwise. If junk is passed, it is stored in the event and used later in the event processing. The driver passes an old junk pointer during connection close which leads to a use-after-free on event processing. Set private data to NULL for events that don 't have private data. BUG: KASAN: use-after-free in ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: Read of size 4 at addr ffff8886caa71200 by task kworker/u128:1/5250 kernel: kernel: Workqueue: iw_cm_wq cm_work_handler [iw_cm] kernel: Call Trace: kernel: dump_stack+0x8c/0xc0 kernel: print_address_description.constprop.0+0x1b/0x210 kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: __kasan_report.cold+0x1a/0x33 kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: kasan_report+0xe/0x20 kernel: check_memory_region+0x130/0x1a0 kernel: memcpy+0x20/0x50 kernel: ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: ? __rpc_execute+0x608/0x620 [sunrpc] kernel: cma_iw_handler+0x212/0x330 [rdma_cm] kernel: ? iw_conn_req_handler+0x6e0/0x6e0 [rdma_cm] kernel: ? enqueue_timer+0x86/0x140 kernel: ? _raw_write_lock_irq+0xd0/0xd0 kernel: cm_work_handler+0xd3d/0x1070 [iw_cm] Fixes: e411e0587e0d ("RDMA/qedr: Add iWARP connection management functions") Link: https://lore.kernel.org/r/20200616093408.17827-1-michal.kalderon@marvell.com Signed-off-by: Ariel Elior Signed-off-by: Michal Kalderon Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/qedr/qedr_iw_cm.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/qedr/qedr_iw_cm.c b/drivers/infiniband/hw/qedr/qedr_iw_cm.c index 792eecd206b6..97fc7dd353b0 100644 --- a/drivers/infiniband/hw/qedr/qedr_iw_cm.c +++ b/drivers/infiniband/hw/qedr/qedr_iw_cm.c @@ -150,8 +150,17 @@ qedr_iw_issue_event(void *context, if (params->cm_info) { event.ird = params->cm_info->ird; event.ord = params->cm_info->ord; - event.private_data_len = params->cm_info->private_data_len; - event.private_data = (void *)params->cm_info->private_data; + /* Only connect_request and reply have valid private data + * the rest of the events this may be left overs from + * connection establishment. CONNECT_REQUEST is issued via + * qedr_iw_mpa_request + */ + if (event_type == IW_CM_EVENT_CONNECT_REPLY) { + event.private_data_len = + params->cm_info->private_data_len; + event.private_data = + (void *)params->cm_info->private_data; + } } if (ep->cm_id) From 730c8912484186d4623d0c76509066d285c3a755 Mon Sep 17 00:00:00 2001 From: Mark Zhang Date: Tue, 16 Jun 2020 13:43:04 +0300 Subject: [PATCH 189/618] RDMA/cma: Protect bind_list and listen_list while finding matching cm id The bind_list and listen_list must be accessed under a lock, add the missing locking around the access in cm_ib_id_from_event() In addition add lockdep asserts to make it clearer what the locking semantic is here. general protection fault: 0000 [#1] SMP NOPTI CPU: 226 PID: 126135 Comm: kworker/226:1 Tainted: G OE 4.12.14-150.47-default #1 SLE15 Hardware name: Cray Inc. Windom/Windom, BIOS 0.8.7 01-10-2020 Workqueue: ib_cm cm_work_handler [ib_cm] task: ffff9c5a60a1d2c0 task.stack: ffffc1d91f554000 RIP: 0010:cma_ib_req_handler+0x3f1/0x11b0 [rdma_cm] RSP: 0018:ffffc1d91f557b40 EFLAGS: 00010286 RAX: deacffffffffff30 RBX: 0000000000000001 RCX: ffff9c2af5bb6000 RDX: 00000000000000a9 RSI: ffff9c5aa4ed2f10 RDI: ffffc1d91f557b08 RBP: ffffc1d91f557d90 R08: ffff9c340cc80000 R09: ffff9c2c0f901900 R10: 0000000000000000 R11: 0000000000000001 R12: deacffffffffff30 R13: ffff9c5a48aeec00 R14: ffffc1d91f557c30 R15: ffff9c5c2eea3688 FS: 0000000000000000(0000) GS:ffff9c5c2fa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00002b5cc03fa320 CR3: 0000003f8500a000 CR4: 00000000003406e0 Call Trace: ? rdma_addr_cancel+0xa0/0xa0 [ib_core] ? cm_process_work+0x28/0x140 [ib_cm] cm_process_work+0x28/0x140 [ib_cm] ? cm_get_bth_pkey.isra.44+0x34/0xa0 [ib_cm] cm_work_handler+0xa06/0x1a6f [ib_cm] ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to+0x7c/0x4b0 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 process_one_work+0x1da/0x400 worker_thread+0x2b/0x3f0 ? process_one_work+0x400/0x400 kthread+0x118/0x140 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x22/0x40 Code: 00 66 83 f8 02 0f 84 ca 05 00 00 49 8b 84 24 d0 01 00 00 48 85 c0 0f 84 68 07 00 00 48 2d d0 01 00 00 49 89 c4 0f 84 59 07 00 00 <41> 0f b7 44 24 20 49 8b 77 50 66 83 f8 0a 75 9e 49 8b 7c 24 28 Fixes: 4c21b5bcef73 ("IB/cma: Add net_dev and private data checks to RDMA CM") Link: https://lore.kernel.org/r/20200616104304.2426081-1-leon@kernel.org Signed-off-by: Mark Zhang Reviewed-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/cma.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 3d7cc9f0f3d4..c30cf5307ce3 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1624,6 +1624,8 @@ static struct rdma_id_private *cma_find_listener( { struct rdma_id_private *id_priv, *id_priv_dev; + lockdep_assert_held(&lock); + if (!bind_list) return ERR_PTR(-EINVAL); @@ -1670,6 +1672,7 @@ cma_ib_id_from_event(struct ib_cm_id *cm_id, } } + mutex_lock(&lock); /* * Net namespace might be getting deleted while route lookup, * cm_id lookup is in progress. Therefore, perform netdevice @@ -1711,6 +1714,7 @@ cma_ib_id_from_event(struct ib_cm_id *cm_id, id_priv = cma_find_listener(bind_list, cm_id, ib_event, req, *net_dev); err: rcu_read_unlock(); + mutex_unlock(&lock); if (IS_ERR(id_priv) && *net_dev) { dev_put(*net_dev); *net_dev = NULL; @@ -2492,6 +2496,8 @@ static void cma_listen_on_dev(struct rdma_id_private *id_priv, struct net *net = id_priv->id.route.addr.dev_addr.net; int ret; + lockdep_assert_held(&lock); + if (cma_family(id_priv) == AF_IB && !rdma_cap_ib_cm(cma_dev->device, 1)) return; @@ -3342,6 +3348,8 @@ static void cma_bind_port(struct rdma_bind_list *bind_list, u64 sid, mask; __be16 port; + lockdep_assert_held(&lock); + addr = cma_src_addr(id_priv); port = htons(bind_list->port); @@ -3370,6 +3378,8 @@ static int cma_alloc_port(enum rdma_ucm_port_space ps, struct rdma_bind_list *bind_list; int ret; + lockdep_assert_held(&lock); + bind_list = kzalloc(sizeof *bind_list, GFP_KERNEL); if (!bind_list) return -ENOMEM; @@ -3396,6 +3406,8 @@ static int cma_port_is_unique(struct rdma_bind_list *bind_list, struct sockaddr *saddr = cma_src_addr(id_priv); __be16 dport = cma_port(daddr); + lockdep_assert_held(&lock); + hlist_for_each_entry(cur_id, &bind_list->owners, node) { struct sockaddr *cur_daddr = cma_dst_addr(cur_id); struct sockaddr *cur_saddr = cma_src_addr(cur_id); @@ -3435,6 +3447,8 @@ static int cma_alloc_any_port(enum rdma_ucm_port_space ps, unsigned int rover; struct net *net = id_priv->id.route.addr.dev_addr.net; + lockdep_assert_held(&lock); + inet_get_local_port_range(net, &low, &high); remaining = (high - low) + 1; rover = prandom_u32() % remaining + low; @@ -3482,6 +3496,8 @@ static int cma_check_port(struct rdma_bind_list *bind_list, struct rdma_id_private *cur_id; struct sockaddr *addr, *cur_addr; + lockdep_assert_held(&lock); + addr = cma_src_addr(id_priv); hlist_for_each_entry(cur_id, &bind_list->owners, node) { if (id_priv == cur_id) @@ -3512,6 +3528,8 @@ static int cma_use_port(enum rdma_ucm_port_space ps, unsigned short snum; int ret; + lockdep_assert_held(&lock); + snum = ntohs(cma_port(cma_src_addr(id_priv))); if (snum < PROT_SOCK && !capable(CAP_NET_BIND_SERVICE)) return -EACCES; From ab183d460daac6292cb0cfd989d88b37b2437844 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Tue, 16 Jun 2020 13:45:36 +0300 Subject: [PATCH 190/618] RDMA/mlx5: Add missed RST2INIT and INIT2INIT steps during ECE handshake Missed steps during ECE handshake left userspace application with less options for the ECE handshake. Pass ECE options in the additional transitions. Fixes: 50aec2c3135e ("RDMA/mlx5: Return ECE data after modify QP") Link: https://lore.kernel.org/r/20200616104536.2426384-1-leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/qpc.c | 8 ++++++++ include/linux/mlx5/mlx5_ifc.h | 10 ++++++---- 2 files changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/qpc.c b/drivers/infiniband/hw/mlx5/qpc.c index c19d91d6dce8..7c3968ef9cd1 100644 --- a/drivers/infiniband/hw/mlx5/qpc.c +++ b/drivers/infiniband/hw/mlx5/qpc.c @@ -346,6 +346,9 @@ static int get_ece_from_mbox(void *out, u16 opcode) int ece = 0; switch (opcode) { + case MLX5_CMD_OP_INIT2INIT_QP: + ece = MLX5_GET(init2init_qp_out, out, ece); + break; case MLX5_CMD_OP_INIT2RTR_QP: ece = MLX5_GET(init2rtr_qp_out, out, ece); break; @@ -355,6 +358,9 @@ static int get_ece_from_mbox(void *out, u16 opcode) case MLX5_CMD_OP_RTS2RTS_QP: ece = MLX5_GET(rts2rts_qp_out, out, ece); break; + case MLX5_CMD_OP_RST2INIT_QP: + ece = MLX5_GET(rst2init_qp_out, out, ece); + break; default: break; } @@ -406,6 +412,7 @@ static int modify_qp_mbox_alloc(struct mlx5_core_dev *dev, u16 opcode, int qpn, return -ENOMEM; MOD_QP_IN_SET_QPC(rst2init_qp, mbox->in, opcode, qpn, opt_param_mask, qpc, uid); + MLX5_SET(rst2init_qp_in, mbox->in, ece, ece); break; case MLX5_CMD_OP_INIT2RTR_QP: if (MBOX_ALLOC(mbox, init2rtr_qp)) @@ -439,6 +446,7 @@ static int modify_qp_mbox_alloc(struct mlx5_core_dev *dev, u16 opcode, int qpn, return -ENOMEM; MOD_QP_IN_SET_QPC(init2init_qp, mbox->in, opcode, qpn, opt_param_mask, qpc, uid); + MLX5_SET(init2init_qp_in, mbox->in, ece, ece); break; default: return -EINVAL; diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 116bd9bb347f..ca1887dd0423 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -4283,7 +4283,8 @@ struct mlx5_ifc_rst2init_qp_out_bits { u8 syndrome[0x20]; - u8 reserved_at_40[0x40]; + u8 reserved_at_40[0x20]; + u8 ece[0x20]; }; struct mlx5_ifc_rst2init_qp_in_bits { @@ -4300,7 +4301,7 @@ struct mlx5_ifc_rst2init_qp_in_bits { u8 opt_param_mask[0x20]; - u8 reserved_at_a0[0x20]; + u8 ece[0x20]; struct mlx5_ifc_qpc_bits qpc; @@ -6619,7 +6620,8 @@ struct mlx5_ifc_init2init_qp_out_bits { u8 syndrome[0x20]; - u8 reserved_at_40[0x40]; + u8 reserved_at_40[0x20]; + u8 ece[0x20]; }; struct mlx5_ifc_init2init_qp_in_bits { @@ -6636,7 +6638,7 @@ struct mlx5_ifc_init2init_qp_in_bits { u8 opt_param_mask[0x20]; - u8 reserved_at_a0[0x20]; + u8 ece[0x20]; struct mlx5_ifc_qpc_bits qpc; From 98a6151907cb5512eb6ba8b90644e3ace2d2fc46 Mon Sep 17 00:00:00 2001 From: Yangyang Li Date: Tue, 16 Jun 2020 21:37:09 +0800 Subject: [PATCH 191/618] RDMA/hns: Fix a calltrace when registering MR from userspace ibmr.device is assigned after MR is successfully registered, but both write_mtpt() and frmr_write_mtpt() accesses it during the mr registration process, which may cause the following error when trying to register MR in userspace and pbl_hop_num is set to 0. pc : hns_roce_mtr_find+0xa0/0x200 [hns_roce] lr : set_mtpt_pbl+0x54/0x118 [hns_roce_hw_v2] sp : ffff00023e73ba20 x29: ffff00023e73ba20 x28: ffff00023e73bad8 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000002 x24: 0000000000000000 x23: ffff00023e73bad0 x22: 0000000000000000 x21: ffff0000094d9000 x20: 0000000000000000 x19: ffff8020a6bdb2c0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0140000000000000 x12: 0040000000000041 x11: ffff000240000000 x10: 0000000000001000 x9 : 0000000000000000 x8 : ffff802fb7558480 x7 : ffff802fb7558480 x6 : 000000000003483d x5 : ffff00023e73bad0 x4 : 0000000000000002 x3 : ffff00023e73bad8 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000094d9708 Call trace: hns_roce_mtr_find+0xa0/0x200 [hns_roce] set_mtpt_pbl+0x54/0x118 [hns_roce_hw_v2] hns_roce_v2_write_mtpt+0x14c/0x168 [hns_roce_hw_v2] hns_roce_mr_enable+0x6c/0x148 [hns_roce] hns_roce_reg_user_mr+0xd8/0x130 [hns_roce] ib_uverbs_reg_mr+0x14c/0x2e0 [ib_uverbs] ib_uverbs_write+0x27c/0x3e8 [ib_uverbs] __vfs_write+0x60/0x190 vfs_write+0xac/0x1c0 ksys_write+0x6c/0xd8 __arm64_sys_write+0x24/0x30 el0_svc_common+0x78/0x130 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc Solve above issue by adding a pointer of structure hns_roce_dev as a parameter of write_mtpt() and frmr_write_mtpt(), so that both of these functions can access it before finishing MR's registration. Fixes: 9b2cf76c9f05 ("RDMA/hns: Optimize PBL buffer allocation process") Link: https://lore.kernel.org/r/1592314629-51715-1-git-send-email-liweihang@huawei.com Signed-off-by: Yangyang Li Signed-off-by: Weihang Li Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hns/hns_roce_device.h | 7 ++++--- drivers/infiniband/hw/hns/hns_roce_hw_v1.c | 4 ++-- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 15 ++++++++------- drivers/infiniband/hw/hns/hns_roce_mr.c | 5 +++-- 4 files changed, 17 insertions(+), 14 deletions(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_device.h b/drivers/infiniband/hw/hns/hns_roce_device.h index a77fa6730b2d..479fa557993e 100644 --- a/drivers/infiniband/hw/hns/hns_roce_device.h +++ b/drivers/infiniband/hw/hns/hns_roce_device.h @@ -898,13 +898,14 @@ struct hns_roce_hw { int (*set_mac)(struct hns_roce_dev *hr_dev, u8 phy_port, u8 *addr); void (*set_mtu)(struct hns_roce_dev *hr_dev, u8 phy_port, enum ib_mtu mtu); - int (*write_mtpt)(void *mb_buf, struct hns_roce_mr *mr, - unsigned long mtpt_idx); + int (*write_mtpt)(struct hns_roce_dev *hr_dev, void *mb_buf, + struct hns_roce_mr *mr, unsigned long mtpt_idx); int (*rereg_write_mtpt)(struct hns_roce_dev *hr_dev, struct hns_roce_mr *mr, int flags, u32 pdn, int mr_access_flags, u64 iova, u64 size, void *mb_buf); - int (*frmr_write_mtpt)(void *mb_buf, struct hns_roce_mr *mr); + int (*frmr_write_mtpt)(struct hns_roce_dev *hr_dev, void *mb_buf, + struct hns_roce_mr *mr); int (*mw_write_mtpt)(void *mb_buf, struct hns_roce_mw *mw); void (*write_cqc)(struct hns_roce_dev *hr_dev, struct hns_roce_cq *hr_cq, void *mb_buf, u64 *mtts, diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c index d02207cd30df..cf39f560b800 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c @@ -1756,10 +1756,10 @@ static void hns_roce_v1_set_mtu(struct hns_roce_dev *hr_dev, u8 phy_port, val); } -static int hns_roce_v1_write_mtpt(void *mb_buf, struct hns_roce_mr *mr, +static int hns_roce_v1_write_mtpt(struct hns_roce_dev *hr_dev, void *mb_buf, + struct hns_roce_mr *mr, unsigned long mtpt_idx) { - struct hns_roce_dev *hr_dev = to_hr_dev(mr->ibmr.device); u64 pages[HNS_ROCE_MAX_INNER_MTPT_NUM] = { 0 }; struct ib_device *ibdev = &hr_dev->ib_dev; struct hns_roce_v1_mpt_entry *mpt_entry; diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index c597d7281629..bb86754cb94d 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -2529,10 +2529,10 @@ static int hns_roce_v2_set_mac(struct hns_roce_dev *hr_dev, u8 phy_port, return hns_roce_cmq_send(hr_dev, &desc, 1); } -static int set_mtpt_pbl(struct hns_roce_v2_mpt_entry *mpt_entry, +static int set_mtpt_pbl(struct hns_roce_dev *hr_dev, + struct hns_roce_v2_mpt_entry *mpt_entry, struct hns_roce_mr *mr) { - struct hns_roce_dev *hr_dev = to_hr_dev(mr->ibmr.device); u64 pages[HNS_ROCE_V2_MAX_INNER_MTPT_NUM] = { 0 }; struct ib_device *ibdev = &hr_dev->ib_dev; dma_addr_t pbl_ba; @@ -2571,7 +2571,8 @@ static int set_mtpt_pbl(struct hns_roce_v2_mpt_entry *mpt_entry, return 0; } -static int hns_roce_v2_write_mtpt(void *mb_buf, struct hns_roce_mr *mr, +static int hns_roce_v2_write_mtpt(struct hns_roce_dev *hr_dev, + void *mb_buf, struct hns_roce_mr *mr, unsigned long mtpt_idx) { struct hns_roce_v2_mpt_entry *mpt_entry; @@ -2620,7 +2621,7 @@ static int hns_roce_v2_write_mtpt(void *mb_buf, struct hns_roce_mr *mr, if (mr->type == MR_TYPE_DMA) return 0; - ret = set_mtpt_pbl(mpt_entry, mr); + ret = set_mtpt_pbl(hr_dev, mpt_entry, mr); return ret; } @@ -2666,15 +2667,15 @@ static int hns_roce_v2_rereg_write_mtpt(struct hns_roce_dev *hr_dev, mr->iova = iova; mr->size = size; - ret = set_mtpt_pbl(mpt_entry, mr); + ret = set_mtpt_pbl(hr_dev, mpt_entry, mr); } return ret; } -static int hns_roce_v2_frmr_write_mtpt(void *mb_buf, struct hns_roce_mr *mr) +static int hns_roce_v2_frmr_write_mtpt(struct hns_roce_dev *hr_dev, + void *mb_buf, struct hns_roce_mr *mr) { - struct hns_roce_dev *hr_dev = to_hr_dev(mr->ibmr.device); struct ib_device *ibdev = &hr_dev->ib_dev; struct hns_roce_v2_mpt_entry *mpt_entry; dma_addr_t pbl_ba = 0; diff --git a/drivers/infiniband/hw/hns/hns_roce_mr.c b/drivers/infiniband/hw/hns/hns_roce_mr.c index 4c0bbb12770d..0e71ebee9e52 100644 --- a/drivers/infiniband/hw/hns/hns_roce_mr.c +++ b/drivers/infiniband/hw/hns/hns_roce_mr.c @@ -180,9 +180,10 @@ static int hns_roce_mr_enable(struct hns_roce_dev *hr_dev, } if (mr->type != MR_TYPE_FRMR) - ret = hr_dev->hw->write_mtpt(mailbox->buf, mr, mtpt_idx); + ret = hr_dev->hw->write_mtpt(hr_dev, mailbox->buf, mr, + mtpt_idx); else - ret = hr_dev->hw->frmr_write_mtpt(mailbox->buf, mr); + ret = hr_dev->hw->frmr_write_mtpt(hr_dev, mailbox->buf, mr); if (ret) { dev_err(dev, "Write mtpt fail!\n"); goto err_page; From 3ec5f54f7a0fdf706951f379d3148798325e516f Mon Sep 17 00:00:00 2001 From: Yangyang Li Date: Tue, 16 Jun 2020 21:39:38 +0800 Subject: [PATCH 192/618] RDMA/hns: Fix an cmd queue issue when resetting If a IMP reset caused by some hardware errors and hns RoCE driver reset occurred at the same time, there is a possiblity that the IMP will stop dealing with command and users can't use the hardware. The logs are as follows: hns3 0000:fd:00.1: cleaned 0, need to clean 1 hns3 0000:fd:00.1: firmware version query failed -11 hns3 0000:fd:00.1: Cmd queue init failed hns3 0000:fd:00.1: Upgrade reset level hns3 0000:fd:00.1: global reset interrupt The hns NIC driver divides the reset process into 3 status: initialization, hardware resetting and softwaring restting. RoCE driver gets reset status by interfaces provided by NIC driver and commands will not be sent to the IMP if the driver is in any above status. The main reason for this issue is that there is a time gap between status 1 and 2, if the RoCE driver sends commands to the IMP during this gap, the IMP will stop working because it is not ready. To eliminate the time gap, the hns NIC driver has added a new interface in commit a4de02287abb9 ("net: hns3: provide .get_cmdq_stat interface for the client"), so RoCE driver can ensure that no commands will be sent during resetting. Link: https://lore.kernel.org/r/1592314778-52822-1-git-send-email-liweihang@huawei.com Signed-off-by: Yangyang Li Signed-off-by: Weihang Li Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index bb86754cb94d..dd01a51816cc 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -910,7 +910,7 @@ static int hns_roce_v2_rst_process_cmd(struct hns_roce_dev *hr_dev) instance_stage = handle->rinfo.instance_state; reset_stage = handle->rinfo.reset_state; reset_cnt = ops->ae_dev_reset_cnt(handle); - hw_resetting = ops->get_hw_reset_stat(handle); + hw_resetting = ops->get_cmdq_stat(handle); sw_resetting = ops->ae_dev_resetting(handle); if (reset_cnt != hr_dev->reset_cnt) From 4121fb0db68ed4de574f9bdc630b75fcc99b4835 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Wed, 17 Jun 2020 09:18:26 +0300 Subject: [PATCH 193/618] RDMA/core: Check that type_attrs is not NULL prior access In disassociate flow, the type_attrs is set to be NULL, which is in an implicit way is checked in alloc_uobj() by "if (!attrs->context)". Change the logic to rely on that check, to be consistent with other alloc_uobj() places that will fix the following kernel splat. BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 2743 Comm: python3 Not tainted 5.7.0-rc6-for-upstream-perf-2020-05-23_19-04-38-5 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:alloc_begin_fd_uobject+0x18/0xf0 [ib_uverbs] Code: 89 43 48 eb 97 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 f5 41 54 55 48 89 fd 53 48 83 ec 08 48 8b 1f <48> 8b 43 18 48 8b 80 80 00 00 00 48 3d 20 10 33 a0 74 1c 48 3d 30 RSP: 0018:ffffc90001127b70 EFLAGS: 00010282 RAX: ffffffffa0339fe0 RBX: 0000000000000000 RCX: 8000000000000007 RDX: fffffffffffffffb RSI: ffffc90001127d28 RDI: ffff88843fe1f600 RBP: ffff88843fe1f600 R08: ffff888461eb06d8 R09: ffff888461eb06f8 R10: ffff888461eb0700 R11: 0000000000000000 R12: ffff88846a5f6450 R13: ffffc90001127d28 R14: ffff88845d7d6ea0 R15: ffffc90001127cb8 FS: 00007f469bff1540(0000) GS:ffff88846f980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 0000000450018003 CR4: 0000000000760ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? xa_store+0x28/0x40 rdma_alloc_begin_uobject+0x4f/0x90 [ib_uverbs] ib_uverbs_create_comp_channel+0x87/0xf0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xb1/0xf0 [ib_uverbs] ib_uverbs_cmd_verbs.isra.8+0x96d/0xae0 [ib_uverbs] ? get_page_from_freelist+0x3bb/0xf70 ? _copy_to_user+0x22/0x30 ? uverbs_disassociate_api+0xd0/0xd0 [ib_uverbs] ? __wake_up_common_lock+0x87/0xc0 ib_uverbs_ioctl+0xbc/0x130 [ib_uverbs] ksys_ioctl+0x83/0xc0 ? ksys_write+0x55/0xd0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x48/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f469ac43267 Fixes: 849e149063bd ("RDMA/core: Do not allow alloc_commit to fail") Link: https://lore.kernel.org/r/20200617061826.2625359-1-leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/rdma_core.c | 38 +++++++++++++++++------------ 1 file changed, 22 insertions(+), 16 deletions(-) diff --git a/drivers/infiniband/core/rdma_core.c b/drivers/infiniband/core/rdma_core.c index 38de4942c682..3027cd2fb247 100644 --- a/drivers/infiniband/core/rdma_core.c +++ b/drivers/infiniband/core/rdma_core.c @@ -470,40 +470,46 @@ static struct ib_uobject * alloc_begin_fd_uobject(const struct uverbs_api_object *obj, struct uverbs_attr_bundle *attrs) { - const struct uverbs_obj_fd_type *fd_type = - container_of(obj->type_attrs, struct uverbs_obj_fd_type, type); + const struct uverbs_obj_fd_type *fd_type; int new_fd; - struct ib_uobject *uobj; + struct ib_uobject *uobj, *ret; struct file *filp; - if (WARN_ON(fd_type->fops->release != &uverbs_uobject_fd_release && - fd_type->fops->release != &uverbs_async_event_release)) - return ERR_PTR(-EINVAL); - - new_fd = get_unused_fd_flags(O_CLOEXEC); - if (new_fd < 0) - return ERR_PTR(new_fd); - uobj = alloc_uobj(attrs, obj); if (IS_ERR(uobj)) + return uobj; + + fd_type = + container_of(obj->type_attrs, struct uverbs_obj_fd_type, type); + if (WARN_ON(fd_type->fops->release != &uverbs_uobject_fd_release && + fd_type->fops->release != &uverbs_async_event_release)) { + ret = ERR_PTR(-EINVAL); goto err_fd; + } + + new_fd = get_unused_fd_flags(O_CLOEXEC); + if (new_fd < 0) { + ret = ERR_PTR(new_fd); + goto err_fd; + } /* Note that uverbs_uobject_fd_release() is called during abort */ filp = anon_inode_getfile(fd_type->name, fd_type->fops, NULL, fd_type->flags); if (IS_ERR(filp)) { - uverbs_uobject_put(uobj); - uobj = ERR_CAST(filp); - goto err_fd; + ret = ERR_CAST(filp); + goto err_getfile; } uobj->object = filp; uobj->id = new_fd; return uobj; -err_fd: +err_getfile: put_unused_fd(new_fd); - return uobj; +err_fd: + uverbs_uobject_put(uobj); + return ret; } struct ib_uobject *rdma_alloc_begin_uobject(const struct uverbs_api_object *obj, From e353b325948d04f1305a7b4ad32eca87ba0823a2 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Tue, 26 May 2020 12:09:39 -0500 Subject: [PATCH 194/618] arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2 LDO1 and LDO2 settings are wrong and case the voltage to go above the maximum level of 2.15V permitted by the SoC to 3.0V. This patch is based on work done on the i.MX8M Mini-EVK which utilizes the same fix. Fixes: 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit") Signed-off-by: Adam Ford Reviewed-by: Daniel Baluta Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi index fb0137a8611c..94911b1707ef 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi @@ -136,7 +136,7 @@ buck6_reg: BUCK6 { ldo1_reg: LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <3000000>; + regulator-min-microvolt = <1600000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; @@ -144,7 +144,7 @@ ldo1_reg: LDO1 { ldo2_reg: LDO2 { regulator-name = "LDO2"; - regulator-min-microvolt = <900000>; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; regulator-boot-on; regulator-always-on; From 2b10be23ac0f8e107fd575397361ddbaebc2944b Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 17 Apr 2020 23:15:00 +0200 Subject: [PATCH 195/618] objtool: Clean up elf_write() condition With there being multiple ways to change the ELF data, let's more concisely track modification. Signed-off-by: Peter Zijlstra (Intel) --- tools/objtool/check.c | 4 +++- tools/objtool/elf.c | 13 +++++++++++-- tools/objtool/elf.h | 5 +++-- tools/objtool/orc_gen.c | 2 +- 4 files changed, 18 insertions(+), 6 deletions(-) diff --git a/tools/objtool/check.c b/tools/objtool/check.c index 5fbb90a80d23..91a67db26165 100644 --- a/tools/objtool/check.c +++ b/tools/objtool/check.c @@ -2740,7 +2740,7 @@ int check(const char *_objname, bool orc) objname = _objname; - file.elf = elf_open_read(objname, orc ? O_RDWR : O_RDONLY); + file.elf = elf_open_read(objname, O_RDWR); if (!file.elf) return 1; @@ -2801,7 +2801,9 @@ int check(const char *_objname, bool orc) ret = create_orc_sections(&file); if (ret < 0) goto out; + } + if (file.elf->changed) { ret = elf_write(file.elf); if (ret < 0) goto out; diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c index 84225679f96d..bc6723a502c3 100644 --- a/tools/objtool/elf.c +++ b/tools/objtool/elf.c @@ -713,6 +713,8 @@ struct section *elf_create_section(struct elf *elf, const char *name, elf_hash_add(elf->section_hash, &sec->hash, sec->idx); elf_hash_add(elf->section_name_hash, &sec->name_hash, str_hash(sec->name)); + elf->changed = true; + return sec; } @@ -746,7 +748,7 @@ struct section *elf_create_rela_section(struct elf *elf, struct section *base) return sec; } -int elf_rebuild_rela_section(struct section *sec) +int elf_rebuild_rela_section(struct elf *elf, struct section *sec) { struct rela *rela; int nr, idx = 0, size; @@ -763,6 +765,9 @@ int elf_rebuild_rela_section(struct section *sec) return -1; } + sec->changed = true; + elf->changed = true; + sec->data->d_buf = relas; sec->data->d_size = size; @@ -779,7 +784,7 @@ int elf_rebuild_rela_section(struct section *sec) return 0; } -int elf_write(const struct elf *elf) +int elf_write(struct elf *elf) { struct section *sec; Elf_Scn *s; @@ -796,6 +801,8 @@ int elf_write(const struct elf *elf) WARN_ELF("gelf_update_shdr"); return -1; } + + sec->changed = false; } } @@ -808,6 +815,8 @@ int elf_write(const struct elf *elf) return -1; } + elf->changed = false; + return 0; } diff --git a/tools/objtool/elf.h b/tools/objtool/elf.h index f4fe1d6ea392..aa9c64da379f 100644 --- a/tools/objtool/elf.h +++ b/tools/objtool/elf.h @@ -76,6 +76,7 @@ struct elf { Elf *elf; GElf_Ehdr ehdr; int fd; + bool changed; char *name; struct list_head sections; DECLARE_HASHTABLE(symbol_hash, ELF_HASH_BITS); @@ -118,7 +119,7 @@ struct elf *elf_open_read(const char *name, int flags); struct section *elf_create_section(struct elf *elf, const char *name, size_t entsize, int nr); struct section *elf_create_rela_section(struct elf *elf, struct section *base); void elf_add_rela(struct elf *elf, struct rela *rela); -int elf_write(const struct elf *elf); +int elf_write(struct elf *elf); void elf_close(struct elf *elf); struct section *find_section_by_name(const struct elf *elf, const char *name); @@ -130,7 +131,7 @@ struct rela *find_rela_by_dest(const struct elf *elf, struct section *sec, unsig struct rela *find_rela_by_dest_range(const struct elf *elf, struct section *sec, unsigned long offset, unsigned int len); struct symbol *find_func_containing(struct section *sec, unsigned long offset); -int elf_rebuild_rela_section(struct section *sec); +int elf_rebuild_rela_section(struct elf *elf, struct section *sec); #define for_each_sec(file, sec) \ list_for_each_entry(sec, &file->elf->sections, list) diff --git a/tools/objtool/orc_gen.c b/tools/objtool/orc_gen.c index c9549988121a..4c37f80eb987 100644 --- a/tools/objtool/orc_gen.c +++ b/tools/objtool/orc_gen.c @@ -222,7 +222,7 @@ int create_orc_sections(struct objtool_file *file) } } - if (elf_rebuild_rela_section(ip_relasec)) + if (elf_rebuild_rela_section(file->elf, ip_relasec)) return -1; return 0; From fdabdd0b05e0bdf232340d5da86563ed142a99a7 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 12 Jun 2020 15:43:00 +0200 Subject: [PATCH 196/618] objtool: Provide elf_write_{insn,reloc}() This provides infrastructure to rewrite instructions; this is immediately useful for helping out with KCOV-vs-noinstr, but will also come in handy for a bunch of variable sized jump-label patches that are still on ice. Signed-off-by: Peter Zijlstra (Intel) --- tools/objtool/elf.c | 40 +++++++++++++++++++++++++++++++++++++++- tools/objtool/elf.h | 7 ++++++- 2 files changed, 45 insertions(+), 2 deletions(-) diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c index bc6723a502c3..26d11d821941 100644 --- a/tools/objtool/elf.c +++ b/tools/objtool/elf.c @@ -529,8 +529,9 @@ static int read_relas(struct elf *elf) rela->addend = rela->rela.r_addend; rela->offset = rela->rela.r_offset; symndx = GELF_R_SYM(rela->rela.r_info); - rela->sym = find_symbol_by_index(elf, symndx); rela->sec = sec; + rela->idx = i; + rela->sym = find_symbol_by_index(elf, symndx); if (!rela->sym) { WARN("can't find rela entry symbol %d for %s", symndx, sec->name); @@ -784,6 +785,43 @@ int elf_rebuild_rela_section(struct elf *elf, struct section *sec) return 0; } +int elf_write_insn(struct elf *elf, struct section *sec, + unsigned long offset, unsigned int len, + const char *insn) +{ + Elf_Data *data = sec->data; + + if (data->d_type != ELF_T_BYTE || data->d_off) { + WARN("write to unexpected data for section: %s", sec->name); + return -1; + } + + memcpy(data->d_buf + offset, insn, len); + elf_flagdata(data, ELF_C_SET, ELF_F_DIRTY); + + elf->changed = true; + + return 0; +} + +int elf_write_rela(struct elf *elf, struct rela *rela) +{ + struct section *sec = rela->sec; + + rela->rela.r_info = GELF_R_INFO(rela->sym->idx, rela->type); + rela->rela.r_addend = rela->addend; + rela->rela.r_offset = rela->offset; + + if (!gelf_update_rela(sec->data, rela->idx, &rela->rela)) { + WARN_ELF("gelf_update_rela"); + return -1; + } + + elf->changed = true; + + return 0; +} + int elf_write(struct elf *elf) { struct section *sec; diff --git a/tools/objtool/elf.h b/tools/objtool/elf.h index aa9c64da379f..7324e772583e 100644 --- a/tools/objtool/elf.h +++ b/tools/objtool/elf.h @@ -64,9 +64,10 @@ struct rela { GElf_Rela rela; struct section *sec; struct symbol *sym; - unsigned int type; unsigned long offset; + unsigned int type; int addend; + int idx; bool jump_table_start; }; @@ -119,6 +120,10 @@ struct elf *elf_open_read(const char *name, int flags); struct section *elf_create_section(struct elf *elf, const char *name, size_t entsize, int nr); struct section *elf_create_rela_section(struct elf *elf, struct section *base); void elf_add_rela(struct elf *elf, struct rela *rela); +int elf_write_insn(struct elf *elf, struct section *sec, + unsigned long offset, unsigned int len, + const char *insn); +int elf_write_rela(struct elf *elf, struct rela *rela); int elf_write(struct elf *elf); void elf_close(struct elf *elf); From 0f1441b44e823a74f3f3780902a113e07c73fbf6 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 12 Jun 2020 16:05:26 +0200 Subject: [PATCH 197/618] objtool: Fix noinstr vs KCOV Since many compilers cannot disable KCOV with a function attribute, help it to NOP out any __sanitizer_cov_*() calls injected in noinstr code. This turns: 12: e8 00 00 00 00 callq 17 13: R_X86_64_PLT32 __sanitizer_cov_trace_pc-0x4 into: 12: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1) 13: R_X86_64_NONE __sanitizer_cov_trace_pc-0x4 Just like recordmcount does. Signed-off-by: Peter Zijlstra (Intel) Acked-by: Dmitry Vyukov --- arch/x86/Kconfig | 2 +- tools/objtool/arch.h | 2 ++ tools/objtool/arch/x86/decode.c | 18 ++++++++++++++++++ tools/objtool/arch/x86/include/arch_elf.h | 6 ++++++ tools/objtool/check.c | 19 +++++++++++++++++++ 5 files changed, 46 insertions(+), 1 deletion(-) create mode 100644 tools/objtool/arch/x86/include/arch_elf.h diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 6a0cc524882d..883da0abf779 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -67,7 +67,7 @@ config X86 select ARCH_HAS_FILTER_PGPROT select ARCH_HAS_FORTIFY_SOURCE select ARCH_HAS_GCOV_PROFILE_ALL - select ARCH_HAS_KCOV if X86_64 + select ARCH_HAS_KCOV if X86_64 && STACK_VALIDATION select ARCH_HAS_MEM_ENCRYPT select ARCH_HAS_MEMBARRIER_SYNC_CORE select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE diff --git a/tools/objtool/arch.h b/tools/objtool/arch.h index eda15a5a285e..3c5967748abb 100644 --- a/tools/objtool/arch.h +++ b/tools/objtool/arch.h @@ -84,4 +84,6 @@ unsigned long arch_jump_destination(struct instruction *insn); unsigned long arch_dest_rela_offset(int addend); +const char *arch_nop_insn(int len); + #endif /* _ARCH_H */ diff --git a/tools/objtool/arch/x86/decode.c b/tools/objtool/arch/x86/decode.c index 4b504fc90bbb..9872195f998b 100644 --- a/tools/objtool/arch/x86/decode.c +++ b/tools/objtool/arch/x86/decode.c @@ -565,3 +565,21 @@ void arch_initial_func_cfi_state(struct cfi_init_state *state) state->regs[16].base = CFI_CFA; state->regs[16].offset = -8; } + +const char *arch_nop_insn(int len) +{ + static const char nops[5][5] = { + /* 1 */ { 0x90 }, + /* 2 */ { 0x66, 0x90 }, + /* 3 */ { 0x0f, 0x1f, 0x00 }, + /* 4 */ { 0x0f, 0x1f, 0x40, 0x00 }, + /* 5 */ { 0x0f, 0x1f, 0x44, 0x00, 0x00 }, + }; + + if (len < 1 || len > 5) { + WARN("invalid NOP size: %d\n", len); + return NULL; + } + + return nops[len-1]; +} diff --git a/tools/objtool/arch/x86/include/arch_elf.h b/tools/objtool/arch/x86/include/arch_elf.h new file mode 100644 index 000000000000..69cc4264b28a --- /dev/null +++ b/tools/objtool/arch/x86/include/arch_elf.h @@ -0,0 +1,6 @@ +#ifndef _OBJTOOL_ARCH_ELF +#define _OBJTOOL_ARCH_ELF + +#define R_NONE R_X86_64_NONE + +#endif /* _OBJTOOL_ARCH_ELF */ diff --git a/tools/objtool/check.c b/tools/objtool/check.c index 91a67db26165..478267a072d0 100644 --- a/tools/objtool/check.c +++ b/tools/objtool/check.c @@ -12,6 +12,7 @@ #include "check.h" #include "special.h" #include "warn.h" +#include "arch_elf.h" #include #include @@ -765,6 +766,24 @@ static int add_call_destinations(struct objtool_file *file) } else insn->call_dest = rela->sym; + /* + * Many compilers cannot disable KCOV with a function attribute + * so they need a little help, NOP out any KCOV calls from noinstr + * text. + */ + if (insn->sec->noinstr && + !strncmp(insn->call_dest->name, "__sanitizer_cov_", 16)) { + if (rela) { + rela->type = R_NONE; + elf_write_rela(file->elf, rela); + } + + elf_write_insn(file->elf, insn->sec, + insn->offset, insn->len, + arch_nop_insn(insn->len)); + insn->type = INSN_NOP; + } + /* * Whatever stack impact regular CALLs have, should be undone * by the RETURN of the called function. From f141a422159a199f4c8dedb7e0df55b3b2cf16cd Mon Sep 17 00:00:00 2001 From: Qiushi Wu Date: Sat, 13 Jun 2020 15:51:58 -0500 Subject: [PATCH 198/618] ASoC: rockchip: Fix a reference count leak. Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count if pm_runtime_put is not called in error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails. Fixes: fc05a5b22253 ("ASoC: rockchip: add support for pdm controller") Signed-off-by: Qiushi Wu Reviewed-by: Heiko Stuebner Link: https://lore.kernel.org/r/20200613205158.27296-1-wu000273@umn.edu Signed-off-by: Mark Brown --- sound/soc/rockchip/rockchip_pdm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/rockchip/rockchip_pdm.c b/sound/soc/rockchip/rockchip_pdm.c index 7cd42fcfcf38..1707414cfa92 100644 --- a/sound/soc/rockchip/rockchip_pdm.c +++ b/sound/soc/rockchip/rockchip_pdm.c @@ -590,8 +590,10 @@ static int rockchip_pdm_resume(struct device *dev) int ret; ret = pm_runtime_get_sync(dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put(dev); return ret; + } ret = regcache_sync(pdm->regmap); From f2d94b86cdba14c9c98e3f1ce92b161f77523e83 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 15 Jun 2020 08:46:51 +0200 Subject: [PATCH 199/618] dt: update a reference for reneases pcar file renamed to yaml This file was renamed, but its reference at pfc-pinctl.txt is still pointing to the old file. Fixes: 7f7d408e5a00 ("dt-bindings: gpio: rcar: Convert to json-schema") Reviewed-by: Geert Uytterhoeven Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/72d7ec91a60e852d34f3e15bc5faef1f62a8260e.1592203542.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring --- .../devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt index b68613188c19..1b8e8b4a6379 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -114,7 +114,7 @@ with values derived from the SoC user manual. [flags]> On other mach-shmobile platforms GPIO is handled by the gpio-rcar driver. -Please refer to Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +Please refer to Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml for documentation of the GPIO device tree bindings on those platforms. From d985becff25f0ddc7ef0d143ee9897014abe8d32 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 15 Jun 2020 08:46:52 +0200 Subject: [PATCH 200/618] dt: fix broken links due to txt->yaml renames There are some new broken doc links due to yaml renames at DT. Developers should really run: ./scripts/documentation-file-ref-check in order to solve those issues while submitting patches. This tool can even fix most of the issues with: ./scripts/documentation-file-ref-check --fix Acked-by: Thomas Bogendoerfer Acked-by: Mark Brown Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/0e4a7f0b7efcc8109c8a41a2e13c8adde4d9c6b9.1592203542.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/display/bridge/sii902x.txt | 2 +- .../devicetree/bindings/display/rockchip/rockchip-drm.yaml | 2 +- Documentation/devicetree/bindings/net/mediatek-bluetooth.txt | 2 +- Documentation/devicetree/bindings/sound/audio-graph-card.txt | 2 +- Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt | 2 +- Documentation/mips/ingenic-tcu.rst | 2 +- MAINTAINERS | 4 ++-- 7 files changed, 8 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt index 6e14e087c0d0..0d1db3f9da84 100644 --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt +++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt @@ -37,7 +37,7 @@ Optional properties: simple-card or audio-graph-card binding. See their binding documents on how to describe the way the sii902x device is connected to the rest of the audio system: - Documentation/devicetree/bindings/sound/simple-card.txt + Documentation/devicetree/bindings/sound/simple-card.yaml Documentation/devicetree/bindings/sound/audio-graph-card.txt Note: In case of the audio-graph-card binding the used port index should be 3. diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml index ec8ae742d4da..7204da5eb4c5 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml @@ -24,7 +24,7 @@ properties: description: | Should contain a list of phandles pointing to display interface port of vop devices. vop definitions as defined in - Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt + Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml required: - compatible diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt index 219bcbd0d344..9ef5bacda8c1 100644 --- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt @@ -3,7 +3,7 @@ MediaTek SoC built-in Bluetooth Devices This device is a serial attached device to BTIF device and thus it must be a child node of the serial node with BTIF. The dt-bindings details for BTIF -device can be known via Documentation/devicetree/bindings/serial/8250.txt. +device can be known via Documentation/devicetree/bindings/serial/8250.yaml. Required properties: diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt index 269682619a70..d5f6919a2d69 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt @@ -5,7 +5,7 @@ It is based on common bindings for device graphs. see ${LINUX}/Documentation/devicetree/bindings/graph.txt Basically, Audio Graph Card property is same as Simple Card. -see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt +see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml Below are same as Simple-Card. diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt index 4d51f3f5ea98..a6ffcdec6f6a 100644 --- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt @@ -5,7 +5,7 @@ codec or external codecs. sti sound drivers allows to expose sti SoC audio interface through the generic ASoC simple card. For details about sound card declaration please refer to -Documentation/devicetree/bindings/sound/simple-card.txt. +Documentation/devicetree/bindings/sound/simple-card.yaml. 1) sti-uniperiph-dai: audio dai device. --------------------------------------- diff --git a/Documentation/mips/ingenic-tcu.rst b/Documentation/mips/ingenic-tcu.rst index c5a646b14450..2b75760619b4 100644 --- a/Documentation/mips/ingenic-tcu.rst +++ b/Documentation/mips/ingenic-tcu.rst @@ -68,4 +68,4 @@ and frameworks can be controlled from the same registers, all of these drivers access their registers through the same regmap. For more information regarding the devicetree bindings of the TCU drivers, -have a look at Documentation/devicetree/bindings/timer/ingenic,tcu.txt. +have a look at Documentation/devicetree/bindings/timer/ingenic,tcu.yaml. diff --git a/MAINTAINERS b/MAINTAINERS index 68f21d46614c..0617dd671c2d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3946,7 +3946,7 @@ L: linux-crypto@vger.kernel.org S: Supported F: drivers/char/hw_random/cctrng.c F: drivers/char/hw_random/cctrng.h -F: Documentation/devicetree/bindings/rng/arm-cctrng.txt +F: Documentation/devicetree/bindings/rng/arm-cctrng.yaml W: https://developer.arm.com/products/system-ip/trustzone-cryptocell/cryptocell-700-family CEC FRAMEWORK @@ -5490,7 +5490,7 @@ F: include/uapi/drm/r128_drm.h DRM DRIVER FOR RAYDIUM RM67191 PANELS M: Robert Chiras S: Maintained -F: Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt +F: Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml F: drivers/gpu/drm/panel/panel-raydium-rm67191.c DRM DRIVER FOR ROCKTECH JH057N00900 PANELS From abd42781c3d2155868821f1b947ae45bbc33330d Mon Sep 17 00:00:00 2001 From: Zhenzhong Duan Date: Thu, 18 Jun 2020 11:21:24 +0800 Subject: [PATCH 201/618] spi: spidev: fix a race between spidev_release and spidev_remove Imagine below scene, spidev is referenced after it's freed. spidev_release() spidev_remove() ... spin_lock_irq(&spidev->spi_lock); spidev->spi = NULL; spin_unlock_irq(&spidev->spi_lock); mutex_lock(&device_list_lock); dofree = (spidev->spi == NULL); if (dofree) kfree(spidev); mutex_unlock(&device_list_lock); mutex_lock(&device_list_lock); list_del(&spidev->device_entry); device_destroy(spidev_class, spidev->devt); clear_bit(MINOR(spidev->devt), minors); if (spidev->users == 0) kfree(spidev); mutex_unlock(&device_list_lock); Fix it by resetting spidev->spi in device_list_lock's protection. Signed-off-by: Zhenzhong Duan Link: https://lore.kernel.org/r/20200618032125.4650-1-zhenzhong.duan@gmail.com Signed-off-by: Mark Brown --- drivers/spi/spidev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index d753df700e9e..f74ea26c382f 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -787,13 +787,13 @@ static int spidev_remove(struct spi_device *spi) { struct spidev_data *spidev = spi_get_drvdata(spi); + /* prevent new opens */ + mutex_lock(&device_list_lock); /* make sure ops on existing fds can abort cleanly */ spin_lock_irq(&spidev->spi_lock); spidev->spi = NULL; spin_unlock_irq(&spidev->spi_lock); - /* prevent new opens */ - mutex_lock(&device_list_lock); list_del(&spidev->device_entry); device_destroy(spidev_class, spidev->devt); clear_bit(MINOR(spidev->devt), minors); From 06096cc6c5a84ced929634b0d79376b94c65a4bd Mon Sep 17 00:00:00 2001 From: Zhenzhong Duan Date: Thu, 18 Jun 2020 11:21:25 +0800 Subject: [PATCH 202/618] spi: spidev: fix a potential use-after-free in spidev_release() If an spi device is unbounded from the driver before the release process, there will be an NULL pointer reference when it's referenced in spi_slave_abort(). Fix it by checking it's already freed before reference. Signed-off-by: Zhenzhong Duan Link: https://lore.kernel.org/r/20200618032125.4650-2-zhenzhong.duan@gmail.com Signed-off-by: Mark Brown --- drivers/spi/spidev.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index f74ea26c382f..59e07675ef86 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -609,15 +609,20 @@ static int spidev_open(struct inode *inode, struct file *filp) static int spidev_release(struct inode *inode, struct file *filp) { struct spidev_data *spidev; + int dofree; mutex_lock(&device_list_lock); spidev = filp->private_data; filp->private_data = NULL; + spin_lock_irq(&spidev->spi_lock); + /* ... after we unbound from the underlying device? */ + dofree = (spidev->spi == NULL); + spin_unlock_irq(&spidev->spi_lock); + /* last close? */ spidev->users--; if (!spidev->users) { - int dofree; kfree(spidev->tx_buffer); spidev->tx_buffer = NULL; @@ -625,19 +630,14 @@ static int spidev_release(struct inode *inode, struct file *filp) kfree(spidev->rx_buffer); spidev->rx_buffer = NULL; - spin_lock_irq(&spidev->spi_lock); - if (spidev->spi) - spidev->speed_hz = spidev->spi->max_speed_hz; - - /* ... after we unbound from the underlying device? */ - dofree = (spidev->spi == NULL); - spin_unlock_irq(&spidev->spi_lock); - if (dofree) kfree(spidev); + else + spidev->speed_hz = spidev->spi->max_speed_hz; } #ifdef CONFIG_SPI_SLAVE - spi_slave_abort(spidev->spi); + if (!dofree) + spi_slave_abort(spidev->spi); #endif mutex_unlock(&device_list_lock); From 9ac2a66158129e27ef19df602efffbd50da0cdef Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 15 Jun 2020 08:46:53 +0200 Subject: [PATCH 203/618] dt: Fix broken references to renamed docs Some files got renamed. Those were all fixed automatically by ./scripts/documentation-file-ref-check --fix Reviewed-by: Philipp Zabel Acked-by: Mark Brown Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/6866c0d6d10ce36bb151c2d3752a20eb5122c532.1592203542.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt | 2 +- Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt | 4 ++-- Documentation/devicetree/bindings/display/imx/ldb.txt | 4 ++-- Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt | 2 +- MAINTAINERS | 4 ++-- 5 files changed, 8 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index 715047444391..10b8459e49f8 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -47,7 +47,7 @@ Required properties: &lsio_mu1 1 2 &lsio_mu1 1 3 &lsio_mu1 3 3>; - See Documentation/devicetree/bindings/mailbox/fsl,mu.txt + See Documentation/devicetree/bindings/mailbox/fsl,mu.yaml for detailed mailbox binding. Note: Each mu which supports general interrupt should have an alias correctly diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt index 5bf77f6dd19d..5a99490c17b9 100644 --- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt +++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt @@ -68,7 +68,7 @@ Required properties: datasheet - clocks : phandle to the PRE axi clock input, as described in Documentation/devicetree/bindings/clock/clock-bindings.txt and - Documentation/devicetree/bindings/clock/imx6q-clock.txt. + Documentation/devicetree/bindings/clock/imx6q-clock.yaml. - clock-names: should be "axi" - interrupts: should contain the PRE interrupt - fsl,iram: phandle pointing to the mmio-sram device node, that should be @@ -94,7 +94,7 @@ Required properties: datasheet - clocks : phandles to the PRG ipg and axi clock inputs, as described in Documentation/devicetree/bindings/clock/clock-bindings.txt and - Documentation/devicetree/bindings/clock/imx6q-clock.txt. + Documentation/devicetree/bindings/clock/imx6q-clock.yaml. - clock-names: should be "ipg" and "axi" - fsl,pres: phandles to the PRE units attached to this PRG, with the fixed PRE as the first entry and the muxable PREs following. diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt index 38c637fa39dd..8e6e7d797943 100644 --- a/Documentation/devicetree/bindings/display/imx/ldb.txt +++ b/Documentation/devicetree/bindings/display/imx/ldb.txt @@ -30,8 +30,8 @@ Required properties: "di2_sel" - IPU2 DI0 mux "di3_sel" - IPU2 DI1 mux The needed clock numbers for each are documented in - Documentation/devicetree/bindings/clock/imx5-clock.txt, and in - Documentation/devicetree/bindings/clock/imx6q-clock.txt. + Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in + Documentation/devicetree/bindings/clock/imx6q-clock.yaml. Optional properties: - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt index 790311a42bf1..c8c1e913f4e7 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt +++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt @@ -19,7 +19,7 @@ Required properties: SPI Controller nodes must be child of GENI based Qualcomm Universal Peripharal. Please refer GENI based QUP wrapper controller node bindings -described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt. +described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml. SPI slave nodes must be children of the SPI master node and conform to SPI bus binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt. diff --git a/MAINTAINERS b/MAINTAINERS index 0617dd671c2d..452904d75228 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14561,8 +14561,8 @@ RENESAS R-CAR THERMAL DRIVERS M: Niklas Söderlund L: linux-renesas-soc@vger.kernel.org S: Supported -F: Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt -F: Documentation/devicetree/bindings/thermal/rcar-thermal.txt +F: Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml +F: Documentation/devicetree/bindings/thermal/rcar-thermal.yaml F: drivers/thermal/rcar_gen3_thermal.c F: drivers/thermal/rcar_thermal.c From 6cb69ea53479958f914e03b21bab0ac152b8f949 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 15 Jun 2020 08:46:54 +0200 Subject: [PATCH 204/618] dt: fix reference to olpc,xo1.75-ec.txt This file was converted and renamed. Fixes: 7882d822b3f9 ("dt-bindings: spi: Convert spi-pxa2xx to json-schema") Reviewed-by: Lubomir Rintel Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/d0262854582ee754e4b8bd80677d96b3e098ea5c.1592203542.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt index 8c4d649cdd8f..2d7cdf19a0d0 100644 --- a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt +++ b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt @@ -8,7 +8,7 @@ The embedded controller requires the SPI controller driver to signal readiness to receive a transfer (that is, when TX FIFO contains the response data) by strobing the ACK pin with the ready signal. See the "ready-gpios" property of the SSP binding as documented in: -. +. Example: &ssp3 { From d0793c3c61348ac222e5b3b2458cf9dd76917c34 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 15 Jun 2020 08:47:06 +0200 Subject: [PATCH 205/618] docs: dt: minor adjustments at writing-schema.rst There are two literal blocks that aren't mark as such. Mark them, in order to make the document to produce a better html output. While here, also add a SPDX header to it. Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/14fc680fd6596b277f94bb5a240cc9dfc41d59bf.1592203542.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring --- Documentation/devicetree/writing-schema.rst | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/writing-schema.rst b/Documentation/devicetree/writing-schema.rst index 220cf464ed77..8c74a99f95e2 100644 --- a/Documentation/devicetree/writing-schema.rst +++ b/Documentation/devicetree/writing-schema.rst @@ -1,4 +1,4 @@ -:orphan: +.. SPDX-License-Identifier: GPL-2.0 Writing DeviceTree Bindings in json-schema ========================================== @@ -124,9 +124,12 @@ dtc must also be built with YAML output support enabled. This requires that libyaml and its headers be installed on the host system. For some distributions that involves installing the development package, such as: -Debian: +Debian:: + apt-get install libyaml-dev -Fedora: + +Fedora:: + dnf -y install libyaml-devel Running checks From 6c41965d647a97b51ff665c7406ec9435aab7fc1 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Wed, 17 Jun 2020 16:01:48 +0300 Subject: [PATCH 206/618] RDMA/mlx5: Don't access ib_qp fields in internal destroy QP path destroy_qp_common is called for flows where QP is already created by HW. While it is called from IB/core, the ibqp.* fields will be fully initialized, but it is not the case if this function is called during QP creation. Don't rely on ibqp fields as much as possible and initialize send_cq/recv_cq as temporal solution till all drivers will be converted to IB/core QP allocation scheme. refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 5372 at lib/refcount.c:28 refcount_warn_saturate+0xfe/0x1a0 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 5372 Comm: syz-executor.2 Not tainted 5.5.0-rc5 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: mlx5_core_put_rsc+0x70/0x80 destroy_resource_common+0x8e/0xb0 mlx5_core_destroy_qp+0xaf/0x1d0 mlx5_ib_destroy_qp+0xeb0/0x1460 ib_destroy_qp_user+0x2d5/0x7d0 create_qp+0xed3/0x2130 ib_uverbs_create_qp+0x13e/0x190 ? ib_uverbs_ex_create_qp ib_uverbs_write+0xaa5/0xdf0 __vfs_write+0x7c/0x100 ksys_write+0xc8/0x200 do_syscall_64+0x9c/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 08d53976609a ("RDMA/mlx5: Copy response to the user in one place") Link: https://lore.kernel.org/r/20200617130148.2846643-1-leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/qp.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index dbe82cdb8d2c..1e567fe3a527 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -2341,18 +2341,18 @@ static void destroy_qp_common(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp, unsigned long flags; int err; - if (qp->ibqp.rwq_ind_tbl) { + if (qp->is_rss) { destroy_rss_raw_qp_tir(dev, qp); return; } - base = (qp->ibqp.qp_type == IB_QPT_RAW_PACKET || + base = (qp->type == IB_QPT_RAW_PACKET || qp->flags & IB_QP_CREATE_SOURCE_QPN) ? - &qp->raw_packet_qp.rq.base : - &qp->trans_qp.base; + &qp->raw_packet_qp.rq.base : + &qp->trans_qp.base; if (qp->state != IB_QPS_RESET) { - if (qp->ibqp.qp_type != IB_QPT_RAW_PACKET && + if (qp->type != IB_QPT_RAW_PACKET && !(qp->flags & IB_QP_CREATE_SOURCE_QPN)) { err = mlx5_core_qp_modify(dev, MLX5_CMD_OP_2RST_QP, 0, NULL, &base->mqp, NULL); @@ -2368,8 +2368,8 @@ static void destroy_qp_common(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp, base->mqp.qpn); } - get_cqs(qp->ibqp.qp_type, qp->ibqp.send_cq, qp->ibqp.recv_cq, - &send_cq, &recv_cq); + get_cqs(qp->type, qp->ibqp.send_cq, qp->ibqp.recv_cq, &send_cq, + &recv_cq); spin_lock_irqsave(&dev->reset_flow_resource_lock, flags); mlx5_ib_lock_cqs(send_cq, recv_cq); @@ -2391,7 +2391,7 @@ static void destroy_qp_common(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp, mlx5_ib_unlock_cqs(send_cq, recv_cq); spin_unlock_irqrestore(&dev->reset_flow_resource_lock, flags); - if (qp->ibqp.qp_type == IB_QPT_RAW_PACKET || + if (qp->type == IB_QPT_RAW_PACKET || qp->flags & IB_QP_CREATE_SOURCE_QPN) { destroy_raw_packet_qp(dev, qp); } else { @@ -3002,10 +3002,18 @@ struct ib_qp *mlx5_ib_create_qp(struct ib_pd *pd, struct ib_qp_init_attr *attr, return &qp->ibqp; destroy_qp: - if (qp->type == MLX5_IB_QPT_DCT) + if (qp->type == MLX5_IB_QPT_DCT) { mlx5_ib_destroy_dct(qp); - else + } else { + /* + * The two lines below are temp solution till QP allocation + * will be moved to be under IB/core responsiblity. + */ + qp->ibqp.send_cq = attr->send_cq; + qp->ibqp.recv_cq = attr->recv_cq; destroy_qp_common(dev, qp, udata); + } + qp = NULL; free_qp: kfree(qp); From d44335572f76020ef473d7977d9fd424e6fc0021 Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Thu, 18 Jun 2020 14:25:07 +0300 Subject: [PATCH 207/618] RDMA/mlx5: Fix remote gid value in query QP Remote gid is not copied to the right address. Fix it by using rdma_ah_set_dgid_raw to copy the remote gid value from the QP context on query QP. Fixes: 70bd7fb87625 ("RDMA/mlx5: Remove manually crafted QP context the query call") Link: https://lore.kernel.org/r/20200618112507.3453496-3-leon@kernel.org Signed-off-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/qp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 1e567fe3a527..264e6d228803 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -4390,8 +4390,7 @@ static void to_rdma_ah_attr(struct mlx5_ib_dev *ibdev, MLX5_GET(ads, path, src_addr_index), MLX5_GET(ads, path, hop_limit), MLX5_GET(ads, path, tclass)); - memcpy(ah_attr, MLX5_ADDR_OF(ads, path, rgid_rip), - MLX5_FLD_SZ_BYTES(ads, rgid_rip)); + rdma_ah_set_dgid_raw(ah_attr, MLX5_ADDR_OF(ads, path, rgid_rip)); } } From 2c0f5292d5358c2c5576146071d641110c3c1612 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Thu, 18 Jun 2020 14:25:06 +0300 Subject: [PATCH 208/618] RDMA/mlx5: Remove ECE limitation from the RAW_PACKET QPs Like any other QP type, rely on FW for the RAW_PACKET QPs to decide if ECE is supported or not. This fixes an inability to create RAW_PACKET QPs with latest rdma-core with the ECE support. Fixes: e383085c2425 ("RDMA/mlx5: Set ECE options during QP create") Link: https://lore.kernel.org/r/20200618112507.3453496-2-leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/qp.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 264e6d228803..eb5b724b121b 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -2873,7 +2873,6 @@ static int mlx5_ib_destroy_dct(struct mlx5_ib_qp *mqp) static int check_ucmd_data(struct mlx5_ib_dev *dev, struct mlx5_create_qp_params *params) { - struct ib_qp_init_attr *attr = params->attr; struct ib_udata *udata = params->udata; size_t size, last; int ret; @@ -2885,14 +2884,7 @@ static int check_ucmd_data(struct mlx5_ib_dev *dev, */ last = sizeof(struct mlx5_ib_create_qp_rss); else - /* IB_QPT_RAW_PACKET doesn't have ECE data */ - switch (attr->qp_type) { - case IB_QPT_RAW_PACKET: - last = offsetof(struct mlx5_ib_create_qp, ece_options); - break; - default: - last = offsetof(struct mlx5_ib_create_qp, reserved); - } + last = offsetof(struct mlx5_ib_create_qp, reserved); if (udata->inlen <= last) return 0; From 9e0dc7b9e1cbc9cd0dc4ab2377c0536d4b18bedc Mon Sep 17 00:00:00 2001 From: Max Gurtovoy Date: Wed, 17 Jun 2020 16:02:30 +0300 Subject: [PATCH 209/618] RDMA/mlx5: Fix integrity enabled QP creation create_flags checks was refactored and broke the creation on integrity enabled QPs and actually broke the NVMe/RDMA and iSER ULP's when using mlx5 driven devices. Fixes: 2978975ce7f1 ("RDMA/mlx5: Process create QP flags in one place") Link: https://lore.kernel.org/r/20200617130230.2846915-1-leon@kernel.org Signed-off-by: Max Gurtovoy Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/qp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index eb5b724b121b..a7fcb00e37a5 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -2668,6 +2668,9 @@ static int process_create_flags(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp, if (qp_type == IB_QPT_RAW_PACKET && attr->rwq_ind_tbl) return (create_flags) ? -EINVAL : 0; + process_create_flag(dev, &create_flags, + IB_QP_CREATE_INTEGRITY_EN, + MLX5_CAP_GEN(mdev, sho), qp); process_create_flag(dev, &create_flags, IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK, MLX5_CAP_GEN(mdev, block_lb_mc), qp); From ee470bb25d0dcdf126f586ec0ae6dca66cb340a4 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 18 Jun 2020 20:25:25 +0200 Subject: [PATCH 210/618] EDAC/amd64: Read back the scrub rate PCI register on F15h Commit: da92110dfdfa ("EDAC, amd64_edac: Extend scrub rate support to F15hM60h") added support for F15h, model 0x60 CPUs but in doing so, missed to read back SCRCTRL PCI config register on F15h CPUs which are *not* model 0x60. Add that read so that doing $ cat /sys/devices/system/edac/mc/mc0/sdram_scrub_rate can show the previously set DRAM scrub rate. Fixes: da92110dfdfa ("EDAC, amd64_edac: Extend scrub rate support to F15hM60h") Reported-by: Anders Andersson Signed-off-by: Borislav Petkov Cc: #v4.4.. Link: https://lkml.kernel.org/r/CAKkunMbNWppx_i6xSdDHLseA2QQmGJqj_crY=NF-GZML5np4Vw@mail.gmail.com --- drivers/edac/amd64_edac.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index ef90070a9194..6262f6370c5d 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -269,6 +269,8 @@ static int get_scrub_rate(struct mem_ctl_info *mci) if (pvt->model == 0x60) amd64_read_pci_cfg(pvt->F2, F15H_M60H_SCRCTRL, &scrubval); + else + amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval); } else { amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval); } From 8c31055758bcd567d3c9b0507123c25249108fda Mon Sep 17 00:00:00 2001 From: Flavio Suligoi Date: Mon, 15 Jun 2020 09:58:35 +0200 Subject: [PATCH 211/618] doc: devicetree: bindings: fix spelling mistake Fix typo: "triger" --> "trigger" Acked-by: Guo Ren Signed-off-by: Flavio Suligoi Link: https://lore.kernel.org/r/20200615075835.15202-1-f.suligoi@asem.it Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt | 2 +- .../devicetree/bindings/interrupt-controller/csky,mpintc.txt | 2 +- Documentation/devicetree/bindings/timer/csky,mptimer.txt | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt index ba455589f869..e1c49b660d3a 100644 --- a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt @@ -12,7 +12,7 @@ Required properties for the top level node: Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. - #interrupt-cells : Specifies the number of cells needed to encode an interrupt. Should be 2. The first cell defines the interrupt number, - the second encodes the triger flags encoded as described in + the second encodes the trigger flags encoded as described in Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - compatible: - "mediatek,mt7621-gpio" for Mediatek controllers diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt index e13405355166..e6bbcae4d07f 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt @@ -10,7 +10,7 @@ Interrupt number definition: 16-31 : private irq, and we use 16 as the co-processor timer. 31-1024: common irq for soc ip. -Interrupt triger mode: (Defined in dt-bindings/interrupt-controller/irq.h) +Interrupt trigger mode: (Defined in dt-bindings/interrupt-controller/irq.h) IRQ_TYPE_LEVEL_HIGH (default) IRQ_TYPE_LEVEL_LOW IRQ_TYPE_EDGE_RISING diff --git a/Documentation/devicetree/bindings/timer/csky,mptimer.txt b/Documentation/devicetree/bindings/timer/csky,mptimer.txt index 15cfec08fbb8..f5c7e99cf52b 100644 --- a/Documentation/devicetree/bindings/timer/csky,mptimer.txt +++ b/Documentation/devicetree/bindings/timer/csky,mptimer.txt @@ -8,7 +8,7 @@ regs is accessed by cpu co-processor 4 registers with mtcr/mfcr. - PTIM_CTLR "cr<0, 14>" Control reg to start reset timer. - PTIM_TSR "cr<1, 14>" Interrupt cleanup status reg. - PTIM_CCVR "cr<3, 14>" Current counter value reg. - - PTIM_LVR "cr<6, 14>" Window value reg to triger next event. + - PTIM_LVR "cr<6, 14>" Window value reg to trigger next event. ============================== timer node bindings definition From f751820bc319a30d31a80fe511d88642aaefcdee Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Thu, 18 Jun 2020 13:07:13 -0600 Subject: [PATCH 212/618] vfio/type1: Fix migration info capability ID ID 1 is already used by the IOVA range capability, use ID 2. Reported-by: Liu Yi L Fixes: ad721705d09c ("vfio iommu: Add migration capability to report supported features") Reviewed-by: Kirti Wankhede Signed-off-by: Alex Williamson --- include/uapi/linux/vfio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h index eca6692667a3..920470502329 100644 --- a/include/uapi/linux/vfio.h +++ b/include/uapi/linux/vfio.h @@ -1030,7 +1030,7 @@ struct vfio_iommu_type1_info_cap_iova_range { * size in bytes that can be used by user applications when getting the dirty * bitmap. */ -#define VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION 1 +#define VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION 2 struct vfio_iommu_type1_info_cap_migration { struct vfio_info_cap_header header; From b4748553f53f2971e07d2619f13d461daac0f3bb Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 16 Jun 2020 10:31:39 +0200 Subject: [PATCH 213/618] net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy The MVNETA_SERDES_CFG register is only available on older SoCs like the Armada XP. On newer SoCs like the Armada 38x the fields are moved to comphy. This patch moves the writes to this register next to the comphy initialization, so that depending on the SoC either comphy or MVNETA_SERDES_CFG is configured. With this we no longer write to the MVNETA_SERDES_CFG on SoCs where it doesn't exist. Suggested-by: Russell King Signed-off-by: Sascha Hauer Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 80 +++++++++++++++------------ 1 file changed, 44 insertions(+), 36 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 946925bbcb2d..987aaaabe4dc 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -106,6 +106,7 @@ #define MVNETA_TX_IN_PRGRS BIT(1) #define MVNETA_TX_FIFO_EMPTY BIT(8) #define MVNETA_RX_MIN_FRAME_SIZE 0x247c +/* Only exists on Armada XP and Armada 370 */ #define MVNETA_SERDES_CFG 0x24A0 #define MVNETA_SGMII_SERDES_PROTO 0x0cc7 #define MVNETA_QSGMII_SERDES_PROTO 0x0667 @@ -3529,26 +3530,55 @@ static int mvneta_setup_txqs(struct mvneta_port *pp) return 0; } -static int mvneta_comphy_init(struct mvneta_port *pp) +static int mvneta_comphy_init(struct mvneta_port *pp, phy_interface_t interface) { int ret; - if (!pp->comphy) - return 0; - - ret = phy_set_mode_ext(pp->comphy, PHY_MODE_ETHERNET, - pp->phy_interface); + ret = phy_set_mode_ext(pp->comphy, PHY_MODE_ETHERNET, interface); if (ret) return ret; return phy_power_on(pp->comphy); } +static int mvneta_config_interface(struct mvneta_port *pp, + phy_interface_t interface) +{ + int ret = 0; + + if (pp->comphy) { + if (interface == PHY_INTERFACE_MODE_SGMII || + interface == PHY_INTERFACE_MODE_1000BASEX || + interface == PHY_INTERFACE_MODE_2500BASEX) { + ret = mvneta_comphy_init(pp, interface); + } + } else { + switch (interface) { + case PHY_INTERFACE_MODE_QSGMII: + mvreg_write(pp, MVNETA_SERDES_CFG, + MVNETA_QSGMII_SERDES_PROTO); + break; + + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_1000BASEX: + mvreg_write(pp, MVNETA_SERDES_CFG, + MVNETA_SGMII_SERDES_PROTO); + break; + default: + return -EINVAL; + } + } + + pp->phy_interface = interface; + + return ret; +} + static void mvneta_start_dev(struct mvneta_port *pp) { int cpu; - WARN_ON(mvneta_comphy_init(pp)); + WARN_ON(mvneta_config_interface(pp, pp->phy_interface)); mvneta_max_rx_size_set(pp, pp->pkt_size); mvneta_txq_max_tx_size_set(pp, pp->pkt_size); @@ -3926,14 +3956,10 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode, if (state->speed == SPEED_2500) new_ctrl4 |= MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE; - if (pp->comphy && pp->phy_interface != state->interface && - (state->interface == PHY_INTERFACE_MODE_SGMII || - state->interface == PHY_INTERFACE_MODE_1000BASEX || - state->interface == PHY_INTERFACE_MODE_2500BASEX)) { - pp->phy_interface = state->interface; - - WARN_ON(phy_power_off(pp->comphy)); - WARN_ON(mvneta_comphy_init(pp)); + if (pp->phy_interface != state->interface) { + if (pp->comphy) + WARN_ON(phy_power_off(pp->comphy)); + WARN_ON(mvneta_config_interface(pp, state->interface)); } if (new_ctrl0 != gmac_ctrl0) @@ -4977,20 +5003,10 @@ static void mvneta_conf_mbus_windows(struct mvneta_port *pp, } /* Power up the port */ -static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode) +static void mvneta_port_power_up(struct mvneta_port *pp, int phy_mode) { /* MAC Cause register should be cleared */ mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0); - - if (phy_mode == PHY_INTERFACE_MODE_QSGMII) - mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO); - else if (phy_mode == PHY_INTERFACE_MODE_SGMII || - phy_interface_mode_is_8023z(phy_mode)) - mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO); - else if (!phy_interface_mode_is_rgmii(phy_mode)) - return -EINVAL; - - return 0; } /* Device initialization routine */ @@ -5176,11 +5192,7 @@ static int mvneta_probe(struct platform_device *pdev) if (err < 0) goto err_netdev; - err = mvneta_port_power_up(pp, phy_mode); - if (err < 0) { - dev_err(&pdev->dev, "can't power up port\n"); - goto err_netdev; - } + mvneta_port_power_up(pp, phy_mode); /* Armada3700 network controller does not support per-cpu * operation, so only single NAPI should be initialized. @@ -5334,11 +5346,7 @@ static int mvneta_resume(struct device *device) } } mvneta_defaults_set(pp); - err = mvneta_port_power_up(pp, pp->phy_interface); - if (err < 0) { - dev_err(device, "can't power up port\n"); - return err; - } + mvneta_port_power_up(pp, pp->phy_interface); netif_device_attach(dev); From 1a642ca7f38992b086101fe204a1ae3c90ed8016 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 16 Jun 2020 10:31:40 +0200 Subject: [PATCH 214/618] net: ethernet: mvneta: Add 2500BaseX support for SoCs without comphy The older SoCs like Armada XP support a 2500BaseX mode in the datasheets referred to as DR-SGMII (Double rated SGMII) or HS-SGMII (High Speed SGMII). This is an upclocked 1000BaseX mode, thus PHY_INTERFACE_MODE_2500BASEX is the appropriate mode define for it. adding support for it merely means writing the correct magic value into the MVNETA_SERDES_CFG register. Signed-off-by: Sascha Hauer Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 987aaaabe4dc..af6000172848 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -110,6 +110,7 @@ #define MVNETA_SERDES_CFG 0x24A0 #define MVNETA_SGMII_SERDES_PROTO 0x0cc7 #define MVNETA_QSGMII_SERDES_PROTO 0x0667 +#define MVNETA_HSGMII_SERDES_PROTO 0x1107 #define MVNETA_TYPE_PRIO 0x24bc #define MVNETA_FORCE_UNI BIT(21) #define MVNETA_TXQ_CMD_1 0x24e4 @@ -3564,6 +3565,11 @@ static int mvneta_config_interface(struct mvneta_port *pp, mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO); break; + + case PHY_INTERFACE_MODE_2500BASEX: + mvreg_write(pp, MVNETA_SERDES_CFG, + MVNETA_HSGMII_SERDES_PROTO); + break; default: return -EINVAL; } From 814152a89ed52c722ab92e9fbabcac3cb8a39245 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Tue, 16 Jun 2020 09:39:21 +0000 Subject: [PATCH 215/618] net: fix memleak in register_netdevice() I got a memleak report when doing some fuzz test: unreferenced object 0xffff888112584000 (size 13599): comm "ip", pid 3048, jiffies 4294911734 (age 343.491s) hex dump (first 32 bytes): 74 61 70 30 00 00 00 00 00 00 00 00 00 00 00 00 tap0............ 00 ee d9 19 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<000000002f60ba65>] __kmalloc_node+0x309/0x3a0 [<0000000075b211ec>] kvmalloc_node+0x7f/0xc0 [<00000000d3a97396>] alloc_netdev_mqs+0x76/0xfc0 [<00000000609c3655>] __tun_chr_ioctl+0x1456/0x3d70 [<000000001127ca24>] ksys_ioctl+0xe5/0x130 [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0 [<00000000e1023498>] do_syscall_64+0x56/0xa0 [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff888111845cc0 (size 8): comm "ip", pid 3048, jiffies 4294911734 (age 343.491s) hex dump (first 8 bytes): 74 61 70 30 00 88 ff ff tap0.... backtrace: [<000000004c159777>] kstrdup+0x35/0x70 [<00000000d8b496ad>] kstrdup_const+0x3d/0x50 [<00000000494e884a>] kvasprintf_const+0xf1/0x180 [<0000000097880a2b>] kobject_set_name_vargs+0x56/0x140 [<000000008fbdfc7b>] dev_set_name+0xab/0xe0 [<000000005b99e3b4>] netdev_register_kobject+0xc0/0x390 [<00000000602704fe>] register_netdevice+0xb61/0x1250 [<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70 [<000000001127ca24>] ksys_ioctl+0xe5/0x130 [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0 [<00000000e1023498>] do_syscall_64+0x56/0xa0 [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff88811886d800 (size 512): comm "ip", pid 3048, jiffies 4294911734 (age 343.491s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff c0 66 3d a3 ff ff ff ff .........f=..... backtrace: [<0000000050315800>] device_add+0x61e/0x1950 [<0000000021008dfb>] netdev_register_kobject+0x17e/0x390 [<00000000602704fe>] register_netdevice+0xb61/0x1250 [<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70 [<000000001127ca24>] ksys_ioctl+0xe5/0x130 [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0 [<00000000e1023498>] do_syscall_64+0x56/0xa0 [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 If call_netdevice_notifiers() failed, then rollback_registered() calls netdev_unregister_kobject() which holds the kobject. The reference cannot be put because the netdev won't be add to todo list, so it will leads a memleak, we need put the reference to avoid memleak. Reported-by: Hulk Robot Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller --- net/core/dev.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/core/dev.c b/net/core/dev.c index 6bc2388141f6..44a14b41ad82 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -9547,6 +9547,13 @@ int register_netdevice(struct net_device *dev) rcu_barrier(); dev->reg_state = NETREG_UNREGISTERED; + /* We should put the kobject that hold in + * netdev_unregister_kobject(), otherwise + * the net device cannot be freed when + * driver calls free_netdev(), because the + * kobject is being hold. + */ + kobject_put(&dev->dev.kobj); } /* * Prevent userspace races by waiting until the network From fb7861d14c8d7edac65b2fcb6e8031cb138457b2 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Tue, 16 Jun 2020 15:52:05 +0000 Subject: [PATCH 216/618] net: core: reduce recursion limit value In the current code, ->ndo_start_xmit() can be executed recursively only 10 times because of stack memory. But, in the case of the vxlan, 10 recursion limit value results in a stack overflow. In the current code, the nested interface is limited by 8 depth. There is no critical reason that the recursion limitation value should be 10. So, it would be good to be the same value with the limitation value of nesting interface depth. Test commands: ip link add vxlan10 type vxlan vni 10 dstport 4789 srcport 4789 4789 ip link set vxlan10 up ip a a 192.168.10.1/24 dev vxlan10 ip n a 192.168.10.2 dev vxlan10 lladdr fc:22:33:44:55:66 nud permanent for i in {9..0} do let A=$i+1 ip link add vxlan$i type vxlan vni $i dstport 4789 srcport 4789 4789 ip link set vxlan$i up ip a a 192.168.$i.1/24 dev vxlan$i ip n a 192.168.$i.2 dev vxlan$i lladdr fc:22:33:44:55:66 nud permanent bridge fdb add fc:22:33:44:55:66 dev vxlan$A dst 192.168.$i.2 self done hping3 192.168.10.2 -2 -d 60000 Splat looks like: [ 103.814237][ T1127] ============================================================================= [ 103.871955][ T1127] BUG kmalloc-2k (Tainted: G B ): Padding overwritten. 0x00000000897a2e4f-0x000 [ 103.873187][ T1127] ----------------------------------------------------------------------------- [ 103.873187][ T1127] [ 103.874252][ T1127] INFO: Slab 0x000000005cccc724 objects=5 used=5 fp=0x0000000000000000 flags=0x10000000001020 [ 103.881323][ T1127] CPU: 3 PID: 1127 Comm: hping3 Tainted: G B 5.7.0+ #575 [ 103.882131][ T1127] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 103.883006][ T1127] Call Trace: [ 103.883324][ T1127] dump_stack+0x96/0xdb [ 103.883716][ T1127] slab_err+0xad/0xd0 [ 103.884106][ T1127] ? _raw_spin_unlock+0x1f/0x30 [ 103.884620][ T1127] ? get_partial_node.isra.78+0x140/0x360 [ 103.885214][ T1127] slab_pad_check.part.53+0xf7/0x160 [ 103.885769][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.886316][ T1127] check_slab+0x97/0xb0 [ 103.886763][ T1127] alloc_debug_processing+0x84/0x1a0 [ 103.887308][ T1127] ___slab_alloc+0x5a5/0x630 [ 103.887765][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.888265][ T1127] ? lock_downgrade+0x730/0x730 [ 103.888762][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.889244][ T1127] ? __slab_alloc+0x3e/0x80 [ 103.889675][ T1127] __slab_alloc+0x3e/0x80 [ 103.890108][ T1127] __kmalloc_node_track_caller+0xc7/0x420 [ ... ] Fixes: 11a766ce915f ("net: Increase xmit RECURSION_LIMIT to 10.") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 6fc613ed8eae..39e28e11863c 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -3157,7 +3157,7 @@ static inline int dev_recursion_level(void) return this_cpu_read(softnet_data.xmit.recursion); } -#define XMIT_RECURSION_LIMIT 10 +#define XMIT_RECURSION_LIMIT 8 static inline bool dev_xmit_recursion(void) { return unlikely(__this_cpu_read(softnet_data.xmit.recursion) > From dafabb6590cb15f300b77c095d50312e2c7c8e0f Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Tue, 16 Jun 2020 16:04:00 +0000 Subject: [PATCH 217/618] ip6_gre: fix use-after-free in ip6gre_tunnel_lookup() In the datapath, the ip6gre_tunnel_lookup() is used and it internally uses fallback tunnel device pointer, which is fb_tunnel_dev. This pointer variable should be set to NULL when a fb interface is deleted. But there is no routine to set fb_tunnel_dev pointer to NULL. So, this pointer will be still used after interface is deleted and it eventually results in the use-after-free problem. Test commands: ip netns add A ip netns add B ip link add eth0 type veth peer name eth1 ip link set eth0 netns A ip link set eth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set eth0 up ip netns exec A ip link add ip6gre1 type ip6gre local fc:0::1 \ remote fc:0::2 ip netns exec A ip -6 a a fc:100::1/64 dev ip6gre1 ip netns exec A ip link set ip6gre1 up ip netns exec A ip -6 a a fc:0::1/64 dev eth0 ip netns exec A ip link set ip6gre0 up ip netns exec B ip link set lo up ip netns exec B ip link set eth1 up ip netns exec B ip link add ip6gre1 type ip6gre local fc:0::2 \ remote fc:0::1 ip netns exec B ip -6 a a fc:100::2/64 dev ip6gre1 ip netns exec B ip link set ip6gre1 up ip netns exec B ip -6 a a fc:0::2/64 dev eth1 ip netns exec B ip link set ip6gre0 up ip netns exec A ping fc:100::2 -s 60000 & ip netns del B Splat looks like: [ 73.087285][ C1] BUG: KASAN: use-after-free in ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.088361][ C1] Read of size 4 at addr ffff888040559218 by task ping/1429 [ 73.089317][ C1] [ 73.089638][ C1] CPU: 1 PID: 1429 Comm: ping Not tainted 5.7.0+ #602 [ 73.090531][ C1] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 73.091725][ C1] Call Trace: [ 73.092160][ C1] [ 73.092556][ C1] dump_stack+0x96/0xdb [ 73.093122][ C1] print_address_description.constprop.6+0x2cc/0x450 [ 73.094016][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.094894][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.095767][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.096619][ C1] kasan_report+0x154/0x190 [ 73.097209][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.097989][ C1] ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.098750][ C1] ? gre_del_protocol+0x60/0x60 [gre] [ 73.099500][ C1] gre_rcv+0x1c5/0x1450 [ip6_gre] [ 73.100199][ C1] ? ip6gre_header+0xf00/0xf00 [ip6_gre] [ 73.100985][ C1] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 73.101830][ C1] ? ip6_input_finish+0x5/0xf0 [ 73.102483][ C1] ip6_protocol_deliver_rcu+0xcbb/0x1510 [ 73.103296][ C1] ip6_input_finish+0x5b/0xf0 [ 73.103920][ C1] ip6_input+0xcd/0x2c0 [ 73.104473][ C1] ? ip6_input_finish+0xf0/0xf0 [ 73.105115][ C1] ? rcu_read_lock_held+0x90/0xa0 [ 73.105783][ C1] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 73.106548][ C1] ipv6_rcv+0x1f1/0x300 [ ... ] Suggested-by: Eric Dumazet Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller --- net/ipv6/ip6_gre.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index 781ca8c07a0d..6532bde82b40 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -127,6 +127,7 @@ static struct ip6_tnl *ip6gre_tunnel_lookup(struct net_device *dev, gre_proto == htons(ETH_P_ERSPAN2)) ? ARPHRD_ETHER : ARPHRD_IP6GRE; int score, cand_score = 4; + struct net_device *ndev; for_each_ip_tunnel_rcu(t, ign->tunnels_r_l[h0 ^ h1]) { if (!ipv6_addr_equal(local, &t->parms.laddr) || @@ -238,9 +239,9 @@ static struct ip6_tnl *ip6gre_tunnel_lookup(struct net_device *dev, if (t && t->dev->flags & IFF_UP) return t; - dev = ign->fb_tunnel_dev; - if (dev && dev->flags & IFF_UP) - return netdev_priv(dev); + ndev = READ_ONCE(ign->fb_tunnel_dev); + if (ndev && ndev->flags & IFF_UP) + return netdev_priv(ndev); return NULL; } @@ -413,6 +414,8 @@ static void ip6gre_tunnel_uninit(struct net_device *dev) ip6gre_tunnel_unlink_md(ign, t); ip6gre_tunnel_unlink(ign, t); + if (ign->fb_tunnel_dev == dev) + WRITE_ONCE(ign->fb_tunnel_dev, NULL); dst_cache_reset(&t->dst_cache); dev_put(dev); } From ba61539c6ae57f4146284a5cb4f7b7ed8d42bf45 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Tue, 16 Jun 2020 16:51:51 +0000 Subject: [PATCH 218/618] ip_tunnel: fix use-after-free in ip_tunnel_lookup() In the datapath, the ip_tunnel_lookup() is used and it internally uses fallback tunnel device pointer, which is fb_tunnel_dev. This pointer variable should be set to NULL when a fb interface is deleted. But there is no routine to set fb_tunnel_dev pointer to NULL. So, this pointer will be still used after interface is deleted and it eventually results in the use-after-free problem. Test commands: ip netns add A ip netns add B ip link add eth0 type veth peer name eth1 ip link set eth0 netns A ip link set eth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set eth0 up ip netns exec A ip link add gre1 type gre local 10.0.0.1 \ remote 10.0.0.2 ip netns exec A ip link set gre1 up ip netns exec A ip a a 10.0.100.1/24 dev gre1 ip netns exec A ip a a 10.0.0.1/24 dev eth0 ip netns exec B ip link set lo up ip netns exec B ip link set eth1 up ip netns exec B ip link add gre1 type gre local 10.0.0.2 \ remote 10.0.0.1 ip netns exec B ip link set gre1 up ip netns exec B ip a a 10.0.100.2/24 dev gre1 ip netns exec B ip a a 10.0.0.2/24 dev eth1 ip netns exec A hping3 10.0.100.2 -2 --flood -d 60000 & ip netns del B Splat looks like: [ 77.793450][ C3] ================================================================== [ 77.794702][ C3] BUG: KASAN: use-after-free in ip_tunnel_lookup+0xcc4/0xf30 [ 77.795573][ C3] Read of size 4 at addr ffff888060bd9c84 by task hping3/2905 [ 77.796398][ C3] [ 77.796664][ C3] CPU: 3 PID: 2905 Comm: hping3 Not tainted 5.8.0-rc1+ #616 [ 77.797474][ C3] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 77.798453][ C3] Call Trace: [ 77.798815][ C3] [ 77.799142][ C3] dump_stack+0x9d/0xdb [ 77.799605][ C3] print_address_description.constprop.7+0x2cc/0x450 [ 77.800365][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.800908][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.801517][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.802145][ C3] kasan_report+0x154/0x190 [ 77.802821][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.803503][ C3] ip_tunnel_lookup+0xcc4/0xf30 [ 77.804165][ C3] __ipgre_rcv+0x1ab/0xaa0 [ip_gre] [ 77.804862][ C3] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 77.805621][ C3] gre_rcv+0x304/0x1910 [ip_gre] [ 77.806293][ C3] ? lock_acquire+0x1a9/0x870 [ 77.806925][ C3] ? gre_rcv+0xfe/0x354 [gre] [ 77.807559][ C3] ? erspan_xmit+0x2e60/0x2e60 [ip_gre] [ 77.808305][ C3] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 77.809032][ C3] ? rcu_read_lock_held+0x90/0xa0 [ 77.809713][ C3] gre_rcv+0x1b8/0x354 [gre] [ ... ] Suggested-by: Eric Dumazet Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller --- net/ipv4/ip_tunnel.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index f4f1d11eab50..0c1f36404471 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -85,9 +85,10 @@ struct ip_tunnel *ip_tunnel_lookup(struct ip_tunnel_net *itn, __be32 remote, __be32 local, __be32 key) { - unsigned int hash; struct ip_tunnel *t, *cand = NULL; struct hlist_head *head; + struct net_device *ndev; + unsigned int hash; hash = ip_tunnel_hash(key, remote); head = &itn->tunnels[hash]; @@ -162,8 +163,9 @@ struct ip_tunnel *ip_tunnel_lookup(struct ip_tunnel_net *itn, if (t && t->dev->flags & IFF_UP) return t; - if (itn->fb_tunnel_dev && itn->fb_tunnel_dev->flags & IFF_UP) - return netdev_priv(itn->fb_tunnel_dev); + ndev = READ_ONCE(itn->fb_tunnel_dev); + if (ndev && ndev->flags & IFF_UP) + return netdev_priv(ndev); return NULL; } @@ -1259,9 +1261,9 @@ void ip_tunnel_uninit(struct net_device *dev) struct ip_tunnel_net *itn; itn = net_generic(net, tunnel->ip_tnl_net_id); - /* fb_tunnel_dev will be unregisted in net-exit call. */ - if (itn->fb_tunnel_dev != dev) - ip_tunnel_del(itn, netdev_priv(dev)); + ip_tunnel_del(itn, netdev_priv(dev)); + if (itn->fb_tunnel_dev == dev) + WRITE_ONCE(itn->fb_tunnel_dev, NULL); dst_cache_reset(&tunnel->dst_cache); } From 7024339a1cfa0d5bbfa628a7a35b67789cc86d7f Mon Sep 17 00:00:00 2001 From: Davide Caratti Date: Tue, 16 Jun 2020 22:25:20 +0200 Subject: [PATCH 219/618] net/sched: act_gate: fix NULL dereference in tcf_gate_init() it is possible to see a KASAN use-after-free, immediately followed by a NULL dereference crash, with the following command: # tc action add action gate index 3 cycle-time 100000000ns \ > cycle-time-ext 100000000ns clockid CLOCK_TAI BUG: KASAN: use-after-free in tcf_action_init_1+0x8eb/0x960 Write of size 1 at addr ffff88810a5908bc by task tc/883 CPU: 0 PID: 883 Comm: tc Not tainted 5.7.0+ #188 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: dump_stack+0x75/0xa0 print_address_description.constprop.6+0x1a/0x220 kasan_report.cold.9+0x37/0x7c tcf_action_init_1+0x8eb/0x960 tcf_action_init+0x157/0x2a0 tcf_action_add+0xd9/0x2f0 tc_ctl_action+0x2a3/0x39d rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 [...] KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 0 PID: 883 Comm: tc Tainted: G B 5.7.0+ #188 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:tcf_action_fill_size+0xa3/0xf0 [....] RSP: 0018:ffff88813a48f250 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: 0000000000000094 RCX: ffffffffa47c3eb6 RDX: 000000000000000e RSI: 0000000000000008 RDI: 0000000000000070 RBP: ffff88810a590800 R08: 0000000000000004 R09: ffffed1027491e03 R10: 0000000000000003 R11: ffffed1027491e03 R12: 0000000000000000 R13: 0000000000000000 R14: dffffc0000000000 R15: ffff88810a590800 FS: 00007f62cae8ce40(0000) GS:ffff888147c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f62c9d20a10 CR3: 000000013a52a000 CR4: 0000000000340ef0 Call Trace: tcf_action_init+0x172/0x2a0 tcf_action_add+0xd9/0x2f0 tc_ctl_action+0x2a3/0x39d rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 this is caused by the test on 'cycletime_ext', that is still unassigned when the action is newly created. This makes the action .init() return 0 without calling tcf_idr_insert(), hence the UAF + crash. rework the logic that prevents zero values of cycle-time, as follows: 1) 'tcfg_cycletime_ext' seems to be unused in the action software path, and it was already possible by other means to obtain non-zero cycletime and zero cycletime-ext. So, removing that test should not cause any damage. 2) while at it, we must prevent overwriting configuration data with wrong ones: use a temporary variable for 'tcfg_cycletime', and validate it preserving the original semantic (that allowed computing the cycle time as the sum of all intervals, when not specified by TCA_GATE_CYCLE_TIME). 3) remove the test on 'tcfg_cycletime', no more useful, and avoid returning -EFAULT, which did not seem an appropriate return value for a wrong netlink attribute. v3: fix uninitialized 'cycletime' (thanks to Vladimir Oltean) v2: remove useless 'return;' at the end of void gate_get_start_time() Fixes: a51c328df310 ("net: qos: introduce a gate control flow action") CC: Ivan Vecera Signed-off-by: Davide Caratti Acked-by: Vladimir Oltean Tested-by: Vladimir Oltean Signed-off-by: David S. Miller --- net/sched/act_gate.c | 36 +++++++++++++----------------------- 1 file changed, 13 insertions(+), 23 deletions(-) diff --git a/net/sched/act_gate.c b/net/sched/act_gate.c index 9c628591f452..94e560c2f81d 100644 --- a/net/sched/act_gate.c +++ b/net/sched/act_gate.c @@ -32,7 +32,7 @@ static ktime_t gate_get_time(struct tcf_gate *gact) return KTIME_MAX; } -static int gate_get_start_time(struct tcf_gate *gact, ktime_t *start) +static void gate_get_start_time(struct tcf_gate *gact, ktime_t *start) { struct tcf_gate_params *param = &gact->param; ktime_t now, base, cycle; @@ -43,18 +43,13 @@ static int gate_get_start_time(struct tcf_gate *gact, ktime_t *start) if (ktime_after(base, now)) { *start = base; - return 0; + return; } cycle = param->tcfg_cycletime; - /* cycle time should not be zero */ - if (!cycle) - return -EFAULT; - n = div64_u64(ktime_sub_ns(now, base), cycle); *start = ktime_add_ns(base, (n + 1) * cycle); - return 0; } static void gate_start_timer(struct tcf_gate *gact, ktime_t start) @@ -287,12 +282,12 @@ static int tcf_gate_init(struct net *net, struct nlattr *nla, enum tk_offsets tk_offset = TK_OFFS_TAI; struct nlattr *tb[TCA_GATE_MAX + 1]; struct tcf_chain *goto_ch = NULL; + u64 cycletime = 0, basetime = 0; struct tcf_gate_params *p; s32 clockid = CLOCK_TAI; struct tcf_gate *gact; struct tc_gate *parm; int ret = 0, err; - u64 basetime = 0; u32 gflags = 0; s32 prio = -1; ktime_t start; @@ -375,11 +370,8 @@ static int tcf_gate_init(struct net *net, struct nlattr *nla, spin_lock_bh(&gact->tcf_lock); p = &gact->param; - if (tb[TCA_GATE_CYCLE_TIME]) { - p->tcfg_cycletime = nla_get_u64(tb[TCA_GATE_CYCLE_TIME]); - if (!p->tcfg_cycletime_ext) - goto chain_put; - } + if (tb[TCA_GATE_CYCLE_TIME]) + cycletime = nla_get_u64(tb[TCA_GATE_CYCLE_TIME]); if (tb[TCA_GATE_ENTRY_LIST]) { err = parse_gate_list(tb[TCA_GATE_ENTRY_LIST], p, extack); @@ -387,14 +379,19 @@ static int tcf_gate_init(struct net *net, struct nlattr *nla, goto chain_put; } - if (!p->tcfg_cycletime) { + if (!cycletime) { struct tcfg_gate_entry *entry; ktime_t cycle = 0; list_for_each_entry(entry, &p->entries, list) cycle = ktime_add_ns(cycle, entry->interval); - p->tcfg_cycletime = cycle; + cycletime = cycle; + if (!cycletime) { + err = -EINVAL; + goto chain_put; + } } + p->tcfg_cycletime = cycletime; if (tb[TCA_GATE_CYCLE_TIME_EXT]) p->tcfg_cycletime_ext = @@ -408,14 +405,7 @@ static int tcf_gate_init(struct net *net, struct nlattr *nla, gact->tk_offset = tk_offset; hrtimer_init(&gact->hitimer, clockid, HRTIMER_MODE_ABS_SOFT); gact->hitimer.function = gate_timer_func; - - err = gate_get_start_time(gact, &start); - if (err < 0) { - NL_SET_ERR_MSG(extack, - "Internal error: failed get start time"); - release_entry_list(&p->entries); - goto chain_put; - } + gate_get_start_time(gact, &start); gact->current_close_time = start; gact->current_gate_status = GATE_ACT_GATE_OPEN | GATE_ACT_PENDING; From c362a06e96eae16ccb7b0f4f93f19224279b8610 Mon Sep 17 00:00:00 2001 From: Davide Caratti Date: Tue, 16 Jun 2020 22:25:21 +0200 Subject: [PATCH 220/618] net/sched: act_gate: fix configuration of the periodic timer assigning a dummy value of 'clock_id' to avoid cancellation of the cycle timer before its initialization was a temporary solution, and we still need to handle the case where act_gate timer parameters are changed by commands like the following one: # tc action replace action gate the fix consists in the following items: 1) remove the workaround assignment of 'clock_id', and init the list of entries before the first error path after IDR atomic check/allocation 2) validate 'clock_id' earlier: there is no need to do IDR atomic check/allocation if we know that 'clock_id' is a bad value 3) use a dedicated function, 'gate_setup_timer()', to ensure that the timer is cancelled and re-initialized on action overwrite, and also ensure we initialize the timer in the error path of tcf_gate_init() v3: improve comment in the error path of tcf_gate_init() (thanks to Vladimir Oltean) v2: avoid 'goto' in gate_setup_timer (thanks to Cong Wang) CC: Ivan Vecera Fixes: a01c245438c5 ("net/sched: fix a couple of splats in the error path of tfc_gate_init()") Fixes: a51c328df310 ("net: qos: introduce a gate control flow action") Signed-off-by: Davide Caratti Acked-by: Vladimir Oltean Tested-by: Vladimir Oltean Signed-off-by: David S. Miller --- net/sched/act_gate.c | 90 +++++++++++++++++++++++++++----------------- 1 file changed, 55 insertions(+), 35 deletions(-) diff --git a/net/sched/act_gate.c b/net/sched/act_gate.c index 94e560c2f81d..323ae7f6315d 100644 --- a/net/sched/act_gate.c +++ b/net/sched/act_gate.c @@ -272,6 +272,27 @@ static int parse_gate_list(struct nlattr *list_attr, return err; } +static void gate_setup_timer(struct tcf_gate *gact, u64 basetime, + enum tk_offsets tko, s32 clockid, + bool do_init) +{ + if (!do_init) { + if (basetime == gact->param.tcfg_basetime && + tko == gact->tk_offset && + clockid == gact->param.tcfg_clockid) + return; + + spin_unlock_bh(&gact->tcf_lock); + hrtimer_cancel(&gact->hitimer); + spin_lock_bh(&gact->tcf_lock); + } + gact->param.tcfg_basetime = basetime; + gact->param.tcfg_clockid = clockid; + gact->tk_offset = tko; + hrtimer_init(&gact->hitimer, clockid, HRTIMER_MODE_ABS_SOFT); + gact->hitimer.function = gate_timer_func; +} + static int tcf_gate_init(struct net *net, struct nlattr *nla, struct nlattr *est, struct tc_action **a, int ovr, int bind, bool rtnl_held, @@ -303,6 +324,27 @@ static int tcf_gate_init(struct net *net, struct nlattr *nla, if (!tb[TCA_GATE_PARMS]) return -EINVAL; + if (tb[TCA_GATE_CLOCKID]) { + clockid = nla_get_s32(tb[TCA_GATE_CLOCKID]); + switch (clockid) { + case CLOCK_REALTIME: + tk_offset = TK_OFFS_REAL; + break; + case CLOCK_MONOTONIC: + tk_offset = TK_OFFS_MAX; + break; + case CLOCK_BOOTTIME: + tk_offset = TK_OFFS_BOOT; + break; + case CLOCK_TAI: + tk_offset = TK_OFFS_TAI; + break; + default: + NL_SET_ERR_MSG(extack, "Invalid 'clockid'"); + return -EINVAL; + } + } + parm = nla_data(tb[TCA_GATE_PARMS]); index = parm->index; @@ -326,10 +368,6 @@ static int tcf_gate_init(struct net *net, struct nlattr *nla, tcf_idr_release(*a, bind); return -EEXIST; } - if (ret == ACT_P_CREATED) { - to_gate(*a)->param.tcfg_clockid = -1; - INIT_LIST_HEAD(&(to_gate(*a)->param.entries)); - } if (tb[TCA_GATE_PRIORITY]) prio = nla_get_s32(tb[TCA_GATE_PRIORITY]); @@ -340,33 +378,14 @@ static int tcf_gate_init(struct net *net, struct nlattr *nla, if (tb[TCA_GATE_FLAGS]) gflags = nla_get_u32(tb[TCA_GATE_FLAGS]); - if (tb[TCA_GATE_CLOCKID]) { - clockid = nla_get_s32(tb[TCA_GATE_CLOCKID]); - switch (clockid) { - case CLOCK_REALTIME: - tk_offset = TK_OFFS_REAL; - break; - case CLOCK_MONOTONIC: - tk_offset = TK_OFFS_MAX; - break; - case CLOCK_BOOTTIME: - tk_offset = TK_OFFS_BOOT; - break; - case CLOCK_TAI: - tk_offset = TK_OFFS_TAI; - break; - default: - NL_SET_ERR_MSG(extack, "Invalid 'clockid'"); - goto release_idr; - } - } + gact = to_gate(*a); + if (ret == ACT_P_CREATED) + INIT_LIST_HEAD(&gact->param.entries); err = tcf_action_check_ctrlact(parm->action, tp, &goto_ch, extack); if (err < 0) goto release_idr; - gact = to_gate(*a); - spin_lock_bh(&gact->tcf_lock); p = &gact->param; @@ -397,14 +416,10 @@ static int tcf_gate_init(struct net *net, struct nlattr *nla, p->tcfg_cycletime_ext = nla_get_u64(tb[TCA_GATE_CYCLE_TIME_EXT]); + gate_setup_timer(gact, basetime, tk_offset, clockid, + ret == ACT_P_CREATED); p->tcfg_priority = prio; - p->tcfg_basetime = basetime; - p->tcfg_clockid = clockid; p->tcfg_flags = gflags; - - gact->tk_offset = tk_offset; - hrtimer_init(&gact->hitimer, clockid, HRTIMER_MODE_ABS_SOFT); - gact->hitimer.function = gate_timer_func; gate_get_start_time(gact, &start); gact->current_close_time = start; @@ -433,6 +448,13 @@ static int tcf_gate_init(struct net *net, struct nlattr *nla, if (goto_ch) tcf_chain_put_by_act(goto_ch); release_idr: + /* action is not inserted in any list: it's safe to init hitimer + * without taking tcf_lock. + */ + if (ret == ACT_P_CREATED) + gate_setup_timer(gact, gact->param.tcfg_basetime, + gact->tk_offset, gact->param.tcfg_clockid, + true); tcf_idr_release(*a, bind); return err; } @@ -443,9 +465,7 @@ static void tcf_gate_cleanup(struct tc_action *a) struct tcf_gate_params *p; p = &gact->param; - if (p->tcfg_clockid != -1) - hrtimer_cancel(&gact->hitimer); - + hrtimer_cancel(&gact->hitimer); release_entry_list(&p->entries); } From 5b3b396c77677b51a6bd1aacd0fe2a04d1efa0ff Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 17 Jun 2020 02:58:41 +0300 Subject: [PATCH 221/618] net: dsa: sja1105: remove debugging code in sja1105_vl_gate This shouldn't be there. Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_vl.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/dsa/sja1105/sja1105_vl.c b/drivers/net/dsa/sja1105/sja1105_vl.c index bdfd6c4e190d..32eca3e660e1 100644 --- a/drivers/net/dsa/sja1105/sja1105_vl.c +++ b/drivers/net/dsa/sja1105/sja1105_vl.c @@ -588,14 +588,10 @@ int sja1105_vl_gate(struct sja1105_private *priv, int port, if (priv->vlan_state == SJA1105_VLAN_UNAWARE && key->type != SJA1105_KEY_VLAN_UNAWARE_VL) { - dev_err(priv->ds->dev, "1: vlan state %d key type %d\n", - priv->vlan_state, key->type); NL_SET_ERR_MSG_MOD(extack, "Can only gate based on DMAC"); return -EOPNOTSUPP; } else if (key->type != SJA1105_KEY_VLAN_AWARE_VL) { - dev_err(priv->ds->dev, "2: vlan state %d key type %d\n", - priv->vlan_state, key->type); NL_SET_ERR_MSG_MOD(extack, "Can only gate based on {DMAC, VID, PCP}"); return -EOPNOTSUPP; From c6ae970bcc8e6f0b761111680ba78f7be43fb05a Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 17 Jun 2020 02:58:42 +0300 Subject: [PATCH 222/618] net: dsa: sja1105: fix checks for VLAN state in redirect action This action requires the VLAN awareness state of the switch to be of the same type as the key that's being added: - If the switch is unaware of VLAN, then the tc filter key must only contain the destination MAC address. - If the switch is VLAN-aware, the key must also contain the VLAN ID and PCP. But this check doesn't work unless we verify the VLAN awareness state on both the "if" and the "else" branches. Fixes: dfacc5a23e22 ("net: dsa: sja1105: support flow-based redirection via virtual links") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_vl.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/dsa/sja1105/sja1105_vl.c b/drivers/net/dsa/sja1105/sja1105_vl.c index 32eca3e660e1..a176f39a052b 100644 --- a/drivers/net/dsa/sja1105/sja1105_vl.c +++ b/drivers/net/dsa/sja1105/sja1105_vl.c @@ -342,7 +342,9 @@ int sja1105_vl_redirect(struct sja1105_private *priv, int port, NL_SET_ERR_MSG_MOD(extack, "Can only redirect based on DMAC"); return -EOPNOTSUPP; - } else if (key->type != SJA1105_KEY_VLAN_AWARE_VL) { + } else if ((priv->vlan_state == SJA1105_VLAN_BEST_EFFORT || + priv->vlan_state == SJA1105_VLAN_FILTERING_FULL) && + key->type != SJA1105_KEY_VLAN_AWARE_VL) { NL_SET_ERR_MSG_MOD(extack, "Can only redirect based on {DMAC, VID, PCP}"); return -EOPNOTSUPP; From 5182a6222dd0f27c41cda2706bdc58d48a0d8f96 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 17 Jun 2020 02:58:43 +0300 Subject: [PATCH 223/618] net: dsa: sja1105: fix checks for VLAN state in gate action This action requires the VLAN awareness state of the switch to be of the same type as the key that's being added: - If the switch is unaware of VLAN, then the tc filter key must only contain the destination MAC address. - If the switch is VLAN-aware, the key must also contain the VLAN ID and PCP. But this check doesn't work unless we verify the VLAN awareness state on both the "if" and the "else" branches. Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_vl.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/dsa/sja1105/sja1105_vl.c b/drivers/net/dsa/sja1105/sja1105_vl.c index a176f39a052b..0056f9c1e471 100644 --- a/drivers/net/dsa/sja1105/sja1105_vl.c +++ b/drivers/net/dsa/sja1105/sja1105_vl.c @@ -593,7 +593,9 @@ int sja1105_vl_gate(struct sja1105_private *priv, int port, NL_SET_ERR_MSG_MOD(extack, "Can only gate based on DMAC"); return -EOPNOTSUPP; - } else if (key->type != SJA1105_KEY_VLAN_AWARE_VL) { + } else if ((priv->vlan_state == SJA1105_VLAN_BEST_EFFORT || + priv->vlan_state == SJA1105_VLAN_FILTERING_FULL) && + key->type != SJA1105_KEY_VLAN_AWARE_VL) { NL_SET_ERR_MSG_MOD(extack, "Can only gate based on {DMAC, VID, PCP}"); return -EOPNOTSUPP; From 5eea3a63ff4aba6a26002e657a6d21934b7e2b96 Mon Sep 17 00:00:00 2001 From: guodeqing Date: Wed, 17 Jun 2020 10:07:16 +0800 Subject: [PATCH 224/618] net: Fix the arp error in some cases ie., $ ifconfig eth0 6.6.6.6 netmask 255.255.255.0 $ ip rule add from 6.6.6.6 table 6666 $ ip route add 9.9.9.9 via 6.6.6.6 $ ping -I 6.6.6.6 9.9.9.9 PING 9.9.9.9 (9.9.9.9) from 6.6.6.6 : 56(84) bytes of data. 3 packets transmitted, 0 received, 100% packet loss, time 2079ms $ arp Address HWtype HWaddress Flags Mask Iface 6.6.6.6 (incomplete) eth0 The arp request address is error, this is because fib_table_lookup in fib_check_nh lookup the destnation 9.9.9.9 nexthop, the scope of the fib result is RT_SCOPE_LINK,the correct scope is RT_SCOPE_HOST. Here I add a check of whether this is RT_TABLE_MAIN to solve this problem. Fixes: 3bfd847203c6 ("net: Use passed in table for nexthop lookups") Signed-off-by: guodeqing Reviewed-by: David Ahern Signed-off-by: David S. Miller --- net/ipv4/fib_semantics.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index e53871e4a097..1f75dc686b6b 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -1109,7 +1109,7 @@ static int fib_check_nh_v4_gw(struct net *net, struct fib_nh *nh, u32 table, if (fl4.flowi4_scope < RT_SCOPE_LINK) fl4.flowi4_scope = RT_SCOPE_LINK; - if (table) + if (table && table != RT_TABLE_MAIN) tbl = fib_get_table(net, table); if (tbl) From 8fd4de1275580a1befa1456d1070eaf6489fb48f Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Wed, 17 Jun 2020 12:08:56 +0200 Subject: [PATCH 225/618] mptcp: cache msk on MP_JOIN init_req The msk ownership is transferred to the child socket at 3rd ack time, so that we avoid more lookups later. If the request does not reach the 3rd ack, the MSK reference is dropped at request sock release time. As a side effect, fallback is now tracked by a NULL msk reference instead of zeroed 'mp_join' field. This will simplify the next patch. Signed-off-by: Paolo Abeni Reviewed-by: Mat Martineau Signed-off-by: David S. Miller --- net/mptcp/protocol.h | 1 + net/mptcp/subflow.c | 39 +++++++++++++++++---------------------- 2 files changed, 18 insertions(+), 22 deletions(-) diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h index db56535dfc29..c6eeaf3e8dcb 100644 --- a/net/mptcp/protocol.h +++ b/net/mptcp/protocol.h @@ -249,6 +249,7 @@ struct mptcp_subflow_request_sock { u64 thmac; u32 local_nonce; u32 remote_nonce; + struct mptcp_sock *msk; }; static inline struct mptcp_subflow_request_sock * diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c index bbdb74b8bc3c..4068bdb2523b 100644 --- a/net/mptcp/subflow.c +++ b/net/mptcp/subflow.c @@ -69,6 +69,9 @@ static void subflow_req_destructor(struct request_sock *req) pr_debug("subflow_req=%p", subflow_req); + if (subflow_req->msk) + sock_put((struct sock *)subflow_req->msk); + if (subflow_req->mp_capable) mptcp_token_destroy_request(subflow_req->token); tcp_request_sock_ops.destructor(req); @@ -86,8 +89,8 @@ static void subflow_generate_hmac(u64 key1, u64 key2, u32 nonce1, u32 nonce2, } /* validate received token and create truncated hmac and nonce for SYN-ACK */ -static bool subflow_token_join_request(struct request_sock *req, - const struct sk_buff *skb) +static struct mptcp_sock *subflow_token_join_request(struct request_sock *req, + const struct sk_buff *skb) { struct mptcp_subflow_request_sock *subflow_req = mptcp_subflow_rsk(req); u8 hmac[SHA256_DIGEST_SIZE]; @@ -97,13 +100,13 @@ static bool subflow_token_join_request(struct request_sock *req, msk = mptcp_token_get_sock(subflow_req->token); if (!msk) { SUBFLOW_REQ_INC_STATS(req, MPTCP_MIB_JOINNOTOKEN); - return false; + return NULL; } local_id = mptcp_pm_get_local_id(msk, (struct sock_common *)req); if (local_id < 0) { sock_put((struct sock *)msk); - return false; + return NULL; } subflow_req->local_id = local_id; @@ -114,9 +117,7 @@ static bool subflow_token_join_request(struct request_sock *req, subflow_req->remote_nonce, hmac); subflow_req->thmac = get_unaligned_be64(hmac); - - sock_put((struct sock *)msk); - return true; + return msk; } static void subflow_init_req(struct request_sock *req, @@ -133,6 +134,7 @@ static void subflow_init_req(struct request_sock *req, subflow_req->mp_capable = 0; subflow_req->mp_join = 0; + subflow_req->msk = NULL; #ifdef CONFIG_TCP_MD5SIG /* no MPTCP if MD5SIG is enabled on this socket or we may run out of @@ -166,12 +168,9 @@ static void subflow_init_req(struct request_sock *req, subflow_req->remote_id = mp_opt.join_id; subflow_req->token = mp_opt.token; subflow_req->remote_nonce = mp_opt.nonce; - pr_debug("token=%u, remote_nonce=%u", subflow_req->token, - subflow_req->remote_nonce); - if (!subflow_token_join_request(req, skb)) { - subflow_req->mp_join = 0; - // @@ need to trigger RST - } + subflow_req->msk = subflow_token_join_request(req, skb); + pr_debug("token=%u, remote_nonce=%u msk=%p", subflow_req->token, + subflow_req->remote_nonce, subflow_req->msk); } } @@ -354,10 +353,9 @@ static bool subflow_hmac_valid(const struct request_sock *req, const struct mptcp_subflow_request_sock *subflow_req; u8 hmac[SHA256_DIGEST_SIZE]; struct mptcp_sock *msk; - bool ret; subflow_req = mptcp_subflow_rsk(req); - msk = mptcp_token_get_sock(subflow_req->token); + msk = subflow_req->msk; if (!msk) return false; @@ -365,12 +363,7 @@ static bool subflow_hmac_valid(const struct request_sock *req, subflow_req->remote_nonce, subflow_req->local_nonce, hmac); - ret = true; - if (crypto_memneq(hmac, mp_opt->hmac, MPTCPOPT_HMAC_LEN)) - ret = false; - - sock_put((struct sock *)msk); - return ret; + return !crypto_memneq(hmac, mp_opt->hmac, MPTCPOPT_HMAC_LEN); } static void mptcp_sock_destruct(struct sock *sk) @@ -522,10 +515,12 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk, } else if (ctx->mp_join) { struct mptcp_sock *owner; - owner = mptcp_token_get_sock(ctx->token); + owner = subflow_req->msk; if (!owner) goto dispose_child; + /* move the msk reference ownership to the subflow */ + subflow_req->msk = NULL; ctx->conn = (struct sock *)owner; if (!mptcp_finish_join(child)) goto dispose_child; From 9e365ff576b7c1623bbc5ef31ec652c533e2f65e Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Wed, 17 Jun 2020 12:08:57 +0200 Subject: [PATCH 226/618] mptcp: drop MP_JOIN request sock on syn cookies Currently any MPTCP socket using syn cookies will fallback to TCP at 3rd ack time. In case of MP_JOIN requests, the RFC mandate closing the child and sockets, but the existing error paths do not handle the syncookie scenario correctly. Address the issue always forcing the child shutdown in case of MP_JOIN fallback. Fixes: ae2dd7164943 ("mptcp: handle tcp fallback when using syn cookies") Signed-off-by: Paolo Abeni Reviewed-by: Mat Martineau Signed-off-by: David S. Miller --- net/mptcp/subflow.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c index 4068bdb2523b..3838a0b3a21f 100644 --- a/net/mptcp/subflow.c +++ b/net/mptcp/subflow.c @@ -431,22 +431,25 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk, struct mptcp_subflow_context *listener = mptcp_subflow_ctx(sk); struct mptcp_subflow_request_sock *subflow_req; struct mptcp_options_received mp_opt; - bool fallback_is_fatal = false; + bool fallback, fallback_is_fatal; struct sock *new_msk = NULL; - bool fallback = false; struct sock *child; pr_debug("listener=%p, req=%p, conn=%p", listener, req, listener->conn); - /* we need later a valid 'mp_capable' value even when options are not - * parsed + /* After child creation we must look for 'mp_capable' even when options + * are not parsed */ mp_opt.mp_capable = 0; - if (tcp_rsk(req)->is_mptcp == 0) + + /* hopefully temporary handling for MP_JOIN+syncookie */ + subflow_req = mptcp_subflow_rsk(req); + fallback_is_fatal = subflow_req->mp_join; + fallback = !tcp_rsk(req)->is_mptcp; + if (fallback) goto create_child; /* if the sk is MP_CAPABLE, we try to fetch the client key */ - subflow_req = mptcp_subflow_rsk(req); if (subflow_req->mp_capable) { if (TCP_SKB_CB(skb)->seq != subflow_req->ssn_offset + 1) { /* here we can receive and accept an in-window, @@ -467,12 +470,11 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk, if (!new_msk) fallback = true; } else if (subflow_req->mp_join) { - fallback_is_fatal = true; mptcp_get_options(skb, &mp_opt); if (!mp_opt.mp_join || !subflow_hmac_valid(req, &mp_opt)) { SUBFLOW_REQ_INC_STATS(req, MPTCP_MIB_JOINACKMAC); - return NULL; + fallback = true; } } From e2dfcfba00ba4a414617ef4c5a8501fe21567eb3 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Wed, 17 Jun 2020 16:54:52 +0200 Subject: [PATCH 227/618] s390/qeth: fix error handling for isolation mode cmds Current(?) OSA devices also store their cmd-specific return codes for SET_ACCESS_CONTROL cmds into the top-level cmd->hdr.return_code. So once we added stricter checking for the top-level field a while ago, none of the error logic that rolls back the user's configuration to its old state is applied any longer. For this specific cmd, go back to the old model where we peek into the cmd structure even though the top-level field indicated an error. Fixes: 686c97ee29c8 ("s390/qeth: fix error handling in adapter command callbacks") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 18a0fb75a710..9636415f810b 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -4544,9 +4544,6 @@ static int qeth_setadpparms_set_access_ctrl_cb(struct qeth_card *card, int fallback = *(int *)reply->param; QETH_CARD_TEXT(card, 4, "setaccb"); - if (cmd->hdr.return_code) - return -EIO; - qeth_setadpparms_inspect_rc(cmd); access_ctrl_req = &cmd->data.setadapterparms.data.set_access_ctrl; QETH_CARD_TEXT_(card, 2, "rc=%d", @@ -4556,7 +4553,7 @@ static int qeth_setadpparms_set_access_ctrl_cb(struct qeth_card *card, QETH_DBF_MESSAGE(3, "ERR:SET_ACCESS_CTRL(%#x) on device %x: %#x\n", access_ctrl_req->subcmd_code, CARD_DEVID(card), cmd->data.setadapterparms.hdr.return_code); - switch (cmd->data.setadapterparms.hdr.return_code) { + switch (qeth_setadpparms_inspect_rc(cmd)) { case SET_ACCESS_CTRL_RC_SUCCESS: if (card->options.isolation == ISOLATION_MODE_NONE) { dev_info(&card->gdev->dev, From 8cebedb643832586162aa5313cae781173c1f81b Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Wed, 17 Jun 2020 16:54:53 +0200 Subject: [PATCH 228/618] s390/qeth: let isolation mode override HW offload restrictions When a device is configured with ISOLATION_MODE_FWD, traffic never goes through the internal switch. Don't apply the offload restrictions in this case. Fixes: c619e9a6f52f ("s390/qeth: don't use restricted offloads for local traffic") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 9636415f810b..88e998de2d03 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -6837,9 +6837,11 @@ netdev_features_t qeth_features_check(struct sk_buff *skb, struct net_device *dev, netdev_features_t features) { + struct qeth_card *card = dev->ml_priv; + /* Traffic with local next-hop is not eligible for some offloads: */ - if (skb->ip_summed == CHECKSUM_PARTIAL) { - struct qeth_card *card = dev->ml_priv; + if (skb->ip_summed == CHECKSUM_PARTIAL && + card->options.isolation != ISOLATION_MODE_FWD) { netdev_features_t restricted = 0; if (skb_is_gso(skb) && !netif_needs_gso(skb, features)) From 4c98045c9b74feab837be58986c0517d3cc661f1 Mon Sep 17 00:00:00 2001 From: Martin Date: Wed, 17 Jun 2020 22:30:23 +0530 Subject: [PATCH 229/618] bareudp: Fixed multiproto mode configuration Code to handle multiproto configuration is missing. Fixes: 4b5f67232d95 ("net: Special handling for IP & MPLS") Signed-off-by: Martin Signed-off-by: David S. Miller --- drivers/net/bareudp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/bareudp.c b/drivers/net/bareudp.c index 5d3c691a1c66..3dd46cd55114 100644 --- a/drivers/net/bareudp.c +++ b/drivers/net/bareudp.c @@ -572,6 +572,9 @@ static int bareudp2info(struct nlattr *data[], struct bareudp_conf *conf, if (data[IFLA_BAREUDP_SRCPORT_MIN]) conf->sport_min = nla_get_u16(data[IFLA_BAREUDP_SRCPORT_MIN]); + if (data[IFLA_BAREUDP_MULTIPROTO_MODE]) + conf->multi_proto_mode = true; + return 0; } From 3a2656a211caf35e56afc9425e6e518fa52f7fbc Mon Sep 17 00:00:00 2001 From: David Christensen Date: Wed, 17 Jun 2020 11:51:17 -0700 Subject: [PATCH 230/618] tg3: driver sleeps indefinitely when EEH errors exceed eeh_max_freezes The driver function tg3_io_error_detected() calls napi_disable twice, without an intervening napi_enable, when the number of EEH errors exceeds eeh_max_freezes, resulting in an indefinite sleep while holding rtnl_lock. Add check for pcierr_recovery which skips code already executed for the "Frozen" state. Signed-off-by: David Christensen Reviewed-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 7a3b22b35238..ebff1fc0d8ce 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -18168,8 +18168,8 @@ static pci_ers_result_t tg3_io_error_detected(struct pci_dev *pdev, rtnl_lock(); - /* We probably don't have netdev yet */ - if (!netdev || !netif_running(netdev)) + /* Could be second call or maybe we don't have netdev yet */ + if (!netdev || tp->pcierr_recovery || !netif_running(netdev)) goto done; /* We needn't recover from permanent error */ From eddbf5d0204e550ee59de02bdc19fe90d4203dd6 Mon Sep 17 00:00:00 2001 From: Alexander Lobakin Date: Wed, 17 Jun 2020 20:42:47 +0000 Subject: [PATCH 231/618] net: ethtool: add missing NETIF_F_GSO_FRAGLIST feature string Commit 3b33583265ed ("net: Add fraglist GRO/GSO feature flags") missed an entry for NETIF_F_GSO_FRAGLIST in netdev_features_strings array. As a result, fraglist GSO feature is not shown in 'ethtool -k' output and can't be toggled on/off. The fix is trivial. Fixes: 3b33583265ed ("net: Add fraglist GRO/GSO feature flags") Signed-off-by: Alexander Lobakin Reviewed-by: Michal Kubecek Signed-off-by: David S. Miller --- net/ethtool/common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ethtool/common.c b/net/ethtool/common.c index 423e640e3876..47f63526818e 100644 --- a/net/ethtool/common.c +++ b/net/ethtool/common.c @@ -43,6 +43,7 @@ const char netdev_features_strings[NETDEV_FEATURE_COUNT][ETH_GSTRING_LEN] = { [NETIF_F_GSO_SCTP_BIT] = "tx-sctp-segmentation", [NETIF_F_GSO_ESP_BIT] = "tx-esp-segmentation", [NETIF_F_GSO_UDP_L4_BIT] = "tx-udp-segmentation", + [NETIF_F_GSO_FRAGLIST_BIT] = "tx-gso-list", [NETIF_F_FCOE_CRC_BIT] = "tx-checksum-fcoe-crc", [NETIF_F_SCTP_CRC_BIT] = "tx-checksum-sctp", From 8dbe4c5d5e40fe140221024f7b16bec9f310bf70 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 17 Jun 2020 20:42:44 -0700 Subject: [PATCH 232/618] net: dsa: bcm_sf2: Fix node reference count of_find_node_by_name() will do an of_node_put() on the "from" argument. With CONFIG_OF_DYNAMIC enabled which checks for device_node reference counts, we would be getting a warning like this: [ 6.347230] refcount_t: increment on 0; use-after-free. [ 6.352498] WARNING: CPU: 3 PID: 77 at lib/refcount.c:156 refcount_inc_checked+0x38/0x44 [ 6.360601] Modules linked in: [ 6.363661] CPU: 3 PID: 77 Comm: kworker/3:1 Tainted: G W 5.4.46-gb78b3e9956e6 #13 [ 6.372546] Hardware name: BCM97278SV (DT) [ 6.376649] Workqueue: events deferred_probe_work_func [ 6.381796] pstate: 60000005 (nZCv daif -PAN -UAO) [ 6.386595] pc : refcount_inc_checked+0x38/0x44 [ 6.391133] lr : refcount_inc_checked+0x38/0x44 ... [ 6.478791] Call trace: [ 6.481243] refcount_inc_checked+0x38/0x44 [ 6.485433] kobject_get+0x3c/0x4c [ 6.488840] of_node_get+0x24/0x34 [ 6.492247] of_irq_find_parent+0x3c/0xe0 [ 6.496263] of_irq_parse_one+0xe4/0x1d0 [ 6.500191] irq_of_parse_and_map+0x44/0x84 [ 6.504381] bcm_sf2_sw_probe+0x22c/0x844 [ 6.508397] platform_drv_probe+0x58/0xa8 [ 6.512413] really_probe+0x238/0x3fc [ 6.516081] driver_probe_device+0x11c/0x12c [ 6.520358] __device_attach_driver+0xa8/0x100 [ 6.524808] bus_for_each_drv+0xb4/0xd0 [ 6.528650] __device_attach+0xd0/0x164 [ 6.532493] device_initial_probe+0x24/0x30 [ 6.536682] bus_probe_device+0x38/0x98 [ 6.540524] deferred_probe_work_func+0xa8/0xd4 [ 6.545061] process_one_work+0x178/0x288 [ 6.549078] process_scheduled_works+0x44/0x48 [ 6.553529] worker_thread+0x218/0x270 [ 6.557285] kthread+0xdc/0xe4 [ 6.560344] ret_from_fork+0x10/0x18 [ 6.563925] ---[ end trace 68f65caf69bb152a ]--- Fix this by adding a of_node_get() to increment the reference count prior to the call. Fixes: afa3b592953b ("net: dsa: bcm_sf2: Ensure correct sub-node is parsed") Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index c7ac63f41918..946e41f020a5 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -1147,6 +1147,8 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev) set_bit(0, priv->cfp.used); set_bit(0, priv->cfp.unique); + /* Balance of_node_put() done by of_find_node_by_name() */ + of_node_get(dn); ports = of_find_node_by_name(dn, "ports"); if (ports) { bcm_sf2_identify_ports(priv, ports); From 0ad6f6e767ec2f613418cbc7ebe5ec4c35af540c Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 17 Jun 2020 22:23:25 -0700 Subject: [PATCH 233/618] net: increment xmit_recursion level in dev_direct_xmit() Back in commit f60e5990d9c1 ("ipv6: protect skb->sk accesses from recursive dereference inside the stack") Hannes added code so that IPv6 stack would not trust skb->sk for typical cases where packet goes through 'standard' xmit path (__dev_queue_xmit()) Alas af_packet had a dev_direct_xmit() path that was not dealing yet with xmit_recursion level. Also change sk_mc_loop() to dump a stack once only. Without this patch, syzbot was able to trigger : [1] [ 153.567378] WARNING: CPU: 7 PID: 11273 at net/core/sock.c:721 sk_mc_loop+0x51/0x70 [ 153.567378] Modules linked in: nfnetlink ip6table_raw ip6table_filter iptable_raw iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 nf_defrag_ipv6 iptable_filter macsec macvtap tap macvlan 8021q hsr wireguard libblake2s blake2s_x86_64 libblake2s_generic udp_tunnel ip6_udp_tunnel libchacha20poly1305 poly1305_x86_64 chacha_x86_64 libchacha curve25519_x86_64 libcurve25519_generic netdevsim batman_adv dummy team bridge stp llc w1_therm wire i2c_mux_pca954x i2c_mux cdc_acm ehci_pci ehci_hcd mlx4_en mlx4_ib ib_uverbs ib_core mlx4_core [ 153.567386] CPU: 7 PID: 11273 Comm: b159172088 Not tainted 5.8.0-smp-DEV #273 [ 153.567387] RIP: 0010:sk_mc_loop+0x51/0x70 [ 153.567388] Code: 66 83 f8 0a 75 24 0f b6 4f 12 b8 01 00 00 00 31 d2 d3 e0 a9 bf ef ff ff 74 07 48 8b 97 f0 02 00 00 0f b6 42 3a 83 e0 01 5d c3 <0f> 0b b8 01 00 00 00 5d c3 0f b6 87 18 03 00 00 5d c0 e8 04 83 e0 [ 153.567388] RSP: 0018:ffff95c69bb93990 EFLAGS: 00010212 [ 153.567388] RAX: 0000000000000011 RBX: ffff95c6e0ee3e00 RCX: 0000000000000007 [ 153.567389] RDX: ffff95c69ae50000 RSI: ffff95c6c30c3000 RDI: ffff95c6c30c3000 [ 153.567389] RBP: ffff95c69bb93990 R08: ffff95c69a77f000 R09: 0000000000000008 [ 153.567389] R10: 0000000000000040 R11: 00003e0e00026128 R12: ffff95c6c30c3000 [ 153.567390] R13: ffff95c6cc4fd500 R14: ffff95c6f84500c0 R15: ffff95c69aa13c00 [ 153.567390] FS: 00007fdc3a283700(0000) GS:ffff95c6ff9c0000(0000) knlGS:0000000000000000 [ 153.567390] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 153.567391] CR2: 00007ffee758e890 CR3: 0000001f9ba20003 CR4: 00000000001606e0 [ 153.567391] Call Trace: [ 153.567391] ip6_finish_output2+0x34e/0x550 [ 153.567391] __ip6_finish_output+0xe7/0x110 [ 153.567391] ip6_finish_output+0x2d/0xb0 [ 153.567392] ip6_output+0x77/0x120 [ 153.567392] ? __ip6_finish_output+0x110/0x110 [ 153.567392] ip6_local_out+0x3d/0x50 [ 153.567392] ipvlan_queue_xmit+0x56c/0x5e0 [ 153.567393] ? ksize+0x19/0x30 [ 153.567393] ipvlan_start_xmit+0x18/0x50 [ 153.567393] dev_direct_xmit+0xf3/0x1c0 [ 153.567393] packet_direct_xmit+0x69/0xa0 [ 153.567394] packet_sendmsg+0xbf0/0x19b0 [ 153.567394] ? plist_del+0x62/0xb0 [ 153.567394] sock_sendmsg+0x65/0x70 [ 153.567394] sock_write_iter+0x93/0xf0 [ 153.567394] new_sync_write+0x18e/0x1a0 [ 153.567395] __vfs_write+0x29/0x40 [ 153.567395] vfs_write+0xb9/0x1b0 [ 153.567395] ksys_write+0xb1/0xe0 [ 153.567395] __x64_sys_write+0x1a/0x20 [ 153.567395] do_syscall_64+0x43/0x70 [ 153.567396] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 153.567396] RIP: 0033:0x453549 [ 153.567396] Code: Bad RIP value. [ 153.567396] RSP: 002b:00007fdc3a282cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 153.567397] RAX: ffffffffffffffda RBX: 00000000004d32d0 RCX: 0000000000453549 [ 153.567397] RDX: 0000000000000020 RSI: 0000000020000300 RDI: 0000000000000003 [ 153.567398] RBP: 00000000004d32d8 R08: 0000000000000000 R09: 0000000000000000 [ 153.567398] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d32dc [ 153.567398] R13: 00007ffee742260f R14: 00007fdc3a282dc0 R15: 00007fdc3a283700 [ 153.567399] ---[ end trace c1d5ae2b1059ec62 ]--- f60e5990d9c1 ("ipv6: protect skb->sk accesses from recursive dereference inside the stack") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller --- net/core/dev.c | 2 ++ net/core/sock.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index 44a14b41ad82..90b59fc50dc9 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4192,10 +4192,12 @@ int dev_direct_xmit(struct sk_buff *skb, u16 queue_id) local_bh_disable(); + dev_xmit_recursion_inc(); HARD_TX_LOCK(dev, txq, smp_processor_id()); if (!netif_xmit_frozen_or_drv_stopped(txq)) ret = netdev_start_xmit(skb, dev, txq, false); HARD_TX_UNLOCK(dev, txq); + dev_xmit_recursion_dec(); local_bh_enable(); diff --git a/net/core/sock.c b/net/core/sock.c index 6c4acf1f0220..94391da27754 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -718,7 +718,7 @@ bool sk_mc_loop(struct sock *sk) return inet6_sk(sk)->mc_loop; #endif } - WARN_ON(1); + WARN_ON_ONCE(1); return true; } EXPORT_SYMBOL(sk_mc_loop); From f140ad9fe2ae16f385f8fe4dc9cf67bb4c51d794 Mon Sep 17 00:00:00 2001 From: Ciara Loftus Date: Tue, 9 Jun 2020 13:19:43 +0000 Subject: [PATCH 234/618] ixgbe: protect ring accesses with READ- and WRITE_ONCE READ_ONCE should be used when reading rings prior to accessing the statistics pointer. Introduce this as well as the corresponding WRITE_ONCE usage when allocating and freeing the rings, to ensure protected access. Signed-off-by: Ciara Loftus Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c | 12 ++++++------ drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 14 +++++++++++--- 2 files changed, 17 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c index fd9f5d41b594..2e35c5706cf1 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c @@ -921,7 +921,7 @@ static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter, ring->queue_index = txr_idx; /* assign ring to adapter */ - adapter->tx_ring[txr_idx] = ring; + WRITE_ONCE(adapter->tx_ring[txr_idx], ring); /* update count and index */ txr_count--; @@ -948,7 +948,7 @@ static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter, set_ring_xdp(ring); /* assign ring to adapter */ - adapter->xdp_ring[xdp_idx] = ring; + WRITE_ONCE(adapter->xdp_ring[xdp_idx], ring); /* update count and index */ xdp_count--; @@ -991,7 +991,7 @@ static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter, ring->queue_index = rxr_idx; /* assign ring to adapter */ - adapter->rx_ring[rxr_idx] = ring; + WRITE_ONCE(adapter->rx_ring[rxr_idx], ring); /* update count and index */ rxr_count--; @@ -1020,13 +1020,13 @@ static void ixgbe_free_q_vector(struct ixgbe_adapter *adapter, int v_idx) ixgbe_for_each_ring(ring, q_vector->tx) { if (ring_is_xdp(ring)) - adapter->xdp_ring[ring->queue_index] = NULL; + WRITE_ONCE(adapter->xdp_ring[ring->queue_index], NULL); else - adapter->tx_ring[ring->queue_index] = NULL; + WRITE_ONCE(adapter->tx_ring[ring->queue_index], NULL); } ixgbe_for_each_ring(ring, q_vector->rx) - adapter->rx_ring[ring->queue_index] = NULL; + WRITE_ONCE(adapter->rx_ring[ring->queue_index], NULL); adapter->q_vector[v_idx] = NULL; napi_hash_del(&q_vector->napi); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index f162b8b8f345..97a423ecf808 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7051,7 +7051,10 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter) } for (i = 0; i < adapter->num_rx_queues; i++) { - struct ixgbe_ring *rx_ring = adapter->rx_ring[i]; + struct ixgbe_ring *rx_ring = READ_ONCE(adapter->rx_ring[i]); + + if (!rx_ring) + continue; non_eop_descs += rx_ring->rx_stats.non_eop_descs; alloc_rx_page += rx_ring->rx_stats.alloc_rx_page; alloc_rx_page_failed += rx_ring->rx_stats.alloc_rx_page_failed; @@ -7072,15 +7075,20 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter) packets = 0; /* gather some stats to the adapter struct that are per queue */ for (i = 0; i < adapter->num_tx_queues; i++) { - struct ixgbe_ring *tx_ring = adapter->tx_ring[i]; + struct ixgbe_ring *tx_ring = READ_ONCE(adapter->tx_ring[i]); + + if (!tx_ring) + continue; restart_queue += tx_ring->tx_stats.restart_queue; tx_busy += tx_ring->tx_stats.tx_busy; bytes += tx_ring->stats.bytes; packets += tx_ring->stats.packets; } for (i = 0; i < adapter->num_xdp_queues; i++) { - struct ixgbe_ring *xdp_ring = adapter->xdp_ring[i]; + struct ixgbe_ring *xdp_ring = READ_ONCE(adapter->xdp_ring[i]); + if (!xdp_ring) + continue; restart_queue += xdp_ring->tx_stats.restart_queue; tx_busy += xdp_ring->tx_stats.tx_busy; bytes += xdp_ring->stats.bytes; From d59e267912cd90b0adf33b4659050d831e746317 Mon Sep 17 00:00:00 2001 From: Ciara Loftus Date: Tue, 9 Jun 2020 13:19:44 +0000 Subject: [PATCH 235/618] i40e: protect ring accesses with READ- and WRITE_ONCE READ_ONCE should be used when reading rings prior to accessing the statistics pointer. Introduce this as well as the corresponding WRITE_ONCE usage when allocating and freeing the rings, to ensure protected access. Signed-off-by: Ciara Loftus Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 29 ++++++++++++++------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 5d807c8004f8..56ecd6c3f236 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -439,11 +439,15 @@ static void i40e_get_netdev_stats_struct(struct net_device *netdev, i40e_get_netdev_stats_struct_tx(ring, stats); if (i40e_enabled_xdp_vsi(vsi)) { - ring++; + ring = READ_ONCE(vsi->xdp_rings[i]); + if (!ring) + continue; i40e_get_netdev_stats_struct_tx(ring, stats); } - ring++; + ring = READ_ONCE(vsi->rx_rings[i]); + if (!ring) + continue; do { start = u64_stats_fetch_begin_irq(&ring->syncp); packets = ring->stats.packets; @@ -787,6 +791,8 @@ static void i40e_update_vsi_stats(struct i40e_vsi *vsi) for (q = 0; q < vsi->num_queue_pairs; q++) { /* locate Tx ring */ p = READ_ONCE(vsi->tx_rings[q]); + if (!p) + continue; do { start = u64_stats_fetch_begin_irq(&p->syncp); @@ -800,8 +806,11 @@ static void i40e_update_vsi_stats(struct i40e_vsi *vsi) tx_linearize += p->tx_stats.tx_linearize; tx_force_wb += p->tx_stats.tx_force_wb; - /* Rx queue is part of the same block as Tx queue */ - p = &p[1]; + /* locate Rx ring */ + p = READ_ONCE(vsi->rx_rings[q]); + if (!p) + continue; + do { start = u64_stats_fetch_begin_irq(&p->syncp); packets = p->stats.packets; @@ -10824,10 +10833,10 @@ static void i40e_vsi_clear_rings(struct i40e_vsi *vsi) if (vsi->tx_rings && vsi->tx_rings[0]) { for (i = 0; i < vsi->alloc_queue_pairs; i++) { kfree_rcu(vsi->tx_rings[i], rcu); - vsi->tx_rings[i] = NULL; - vsi->rx_rings[i] = NULL; + WRITE_ONCE(vsi->tx_rings[i], NULL); + WRITE_ONCE(vsi->rx_rings[i], NULL); if (vsi->xdp_rings) - vsi->xdp_rings[i] = NULL; + WRITE_ONCE(vsi->xdp_rings[i], NULL); } } } @@ -10861,7 +10870,7 @@ static int i40e_alloc_rings(struct i40e_vsi *vsi) if (vsi->back->hw_features & I40E_HW_WB_ON_ITR_CAPABLE) ring->flags = I40E_TXR_FLAGS_WB_ON_ITR; ring->itr_setting = pf->tx_itr_default; - vsi->tx_rings[i] = ring++; + WRITE_ONCE(vsi->tx_rings[i], ring++); if (!i40e_enabled_xdp_vsi(vsi)) goto setup_rx; @@ -10879,7 +10888,7 @@ static int i40e_alloc_rings(struct i40e_vsi *vsi) ring->flags = I40E_TXR_FLAGS_WB_ON_ITR; set_ring_xdp(ring); ring->itr_setting = pf->tx_itr_default; - vsi->xdp_rings[i] = ring++; + WRITE_ONCE(vsi->xdp_rings[i], ring++); setup_rx: ring->queue_index = i; @@ -10892,7 +10901,7 @@ static int i40e_alloc_rings(struct i40e_vsi *vsi) ring->size = 0; ring->dcb_tc = 0; ring->itr_setting = pf->rx_itr_default; - vsi->rx_rings[i] = ring; + WRITE_ONCE(vsi->rx_rings[i], ring); } return 0; From b1d95cc2391ffac0c5b27256a4fb0d2cfb021a29 Mon Sep 17 00:00:00 2001 From: Ciara Loftus Date: Tue, 9 Jun 2020 13:19:45 +0000 Subject: [PATCH 236/618] ice: protect ring accesses with WRITE_ONCE The READ_ONCE macro is used when reading rings prior to accessing the statistics pointer. The corresponding WRITE_ONCE usage when allocating and freeing the rings to ensure protected access was not in place. Introduce this. Signed-off-by: Ciara Loftus Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice_lib.c | 8 ++++---- drivers/net/ethernet/intel/ice/ice_main.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c index 28b46cc9f5cb..2e3a39cea2c0 100644 --- a/drivers/net/ethernet/intel/ice/ice_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_lib.c @@ -1194,7 +1194,7 @@ static void ice_vsi_clear_rings(struct ice_vsi *vsi) for (i = 0; i < vsi->alloc_txq; i++) { if (vsi->tx_rings[i]) { kfree_rcu(vsi->tx_rings[i], rcu); - vsi->tx_rings[i] = NULL; + WRITE_ONCE(vsi->tx_rings[i], NULL); } } } @@ -1202,7 +1202,7 @@ static void ice_vsi_clear_rings(struct ice_vsi *vsi) for (i = 0; i < vsi->alloc_rxq; i++) { if (vsi->rx_rings[i]) { kfree_rcu(vsi->rx_rings[i], rcu); - vsi->rx_rings[i] = NULL; + WRITE_ONCE(vsi->rx_rings[i], NULL); } } } @@ -1235,7 +1235,7 @@ static int ice_vsi_alloc_rings(struct ice_vsi *vsi) ring->vsi = vsi; ring->dev = dev; ring->count = vsi->num_tx_desc; - vsi->tx_rings[i] = ring; + WRITE_ONCE(vsi->tx_rings[i], ring); } /* Allocate Rx rings */ @@ -1254,7 +1254,7 @@ static int ice_vsi_alloc_rings(struct ice_vsi *vsi) ring->netdev = vsi->netdev; ring->dev = dev; ring->count = vsi->num_rx_desc; - vsi->rx_rings[i] = ring; + WRITE_ONCE(vsi->rx_rings[i], ring); } return 0; diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 082825e3cb39..4cbd49c87568 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -1702,7 +1702,7 @@ static int ice_xdp_alloc_setup_rings(struct ice_vsi *vsi) xdp_ring->netdev = NULL; xdp_ring->dev = dev; xdp_ring->count = vsi->num_tx_desc; - vsi->xdp_rings[i] = xdp_ring; + WRITE_ONCE(vsi->xdp_rings[i], xdp_ring); if (ice_setup_tx_ring(xdp_ring)) goto free_xdp_rings; ice_set_ring_xdp(xdp_ring); From 3995ecbabc6f8019b3a55aeb551eeb9598b8b354 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B6rn=20T=C3=B6pel?= Date: Fri, 12 Jun 2020 13:47:31 +0200 Subject: [PATCH 237/618] i40e: fix crash when Rx descriptor count is changed MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When the AF_XDP buffer allocator was introduced, the Rx SW ring "rx_bi" allocation was moved from i40e_setup_rx_descriptors() function, and was instead done in the i40e_configure_rx_ring() function. This broke the ethtool set_ringparam() hook for changing the Rx descriptor count, which was relying on i40e_setup_rx_descriptors() to handle the allocation. Fix this by adding an explicit i40e_alloc_rx_bi() call to i40e_set_ringparam(). Fixes: be1222b585fd ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings") Signed-off-by: Björn Töpel Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c index aa8026b1eb81..67806b7b2f49 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c @@ -2070,6 +2070,9 @@ static int i40e_set_ringparam(struct net_device *netdev, */ rx_rings[i].tail = hw->hw_addr + I40E_PRTGEN_STATUS; err = i40e_setup_rx_descriptors(&rx_rings[i]); + if (err) + goto rx_unwind; + err = i40e_alloc_rx_bi(&rx_rings[i]); if (err) goto rx_unwind; From 49097762fa405cdc16f8f597f6d27c078d4a31e9 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Fri, 19 Jun 2020 11:40:46 +0200 Subject: [PATCH 238/618] Revert "KVM: VMX: Micro-optimize vmexit time when not exposing PMU" Guest crashes are observed on a Cascade Lake system when 'perf top' is launched on the host, e.g. BUG: unable to handle kernel paging request at fffffe0000073038 PGD 7ffa7067 P4D 7ffa7067 PUD 7ffa6067 PMD 7ffa5067 PTE ffffffffff120 Oops: 0000 [#1] SMP PTI CPU: 1 PID: 1 Comm: systemd Not tainted 4.18.0+ #380 ... Call Trace: serial8250_console_write+0xfe/0x1f0 call_console_drivers.constprop.0+0x9d/0x120 console_unlock+0x1ea/0x460 Call traces are different but the crash is imminent. The problem was blindly bisected to the commit 041bc42ce2d0 ("KVM: VMX: Micro-optimize vmexit time when not exposing PMU"). It was also confirmed that the issue goes away if PMU is exposed to the guest. With some instrumentation of the guest we can see what is being switched (when we do atomic_switch_perf_msrs()): vmx_vcpu_run: switching 2 msrs vmx_vcpu_run: switching MSR38f guest: 70000000d host: 70000000f vmx_vcpu_run: switching MSR3f1 guest: 0 host: 2 The current guess is that PEBS (MSR_IA32_PEBS_ENABLE, 0x3f1) is to blame. Regardless of whether PMU is exposed to the guest or not, PEBS needs to be disabled upon switch. This reverts commit 041bc42ce2d0efac3b85bbb81dea8c74b81f4ef9. Reported-by: Maxime Coquelin Signed-off-by: Vitaly Kuznetsov Message-Id: <20200619094046.654019-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx/vmx.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index 36c771728c8c..b1a23ad986ff 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -6728,8 +6728,7 @@ static fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu) pt_guest_enter(vmx); - if (vcpu_to_pmu(vcpu)->version) - atomic_switch_perf_msrs(vmx); + atomic_switch_perf_msrs(vmx); atomic_switch_umwait_control_msr(vmx); if (enable_preemption_timer) From a17f4bed811c60712d8131883cdba11a105d0161 Mon Sep 17 00:00:00 2001 From: Fan Guo Date: Fri, 12 Jun 2020 14:38:24 +0800 Subject: [PATCH 239/618] RDMA/mad: Fix possible memory leak in ib_mad_post_receive_mads() If ib_dma_mapping_error() returns non-zero value, ib_mad_post_receive_mads() will jump out of loops and return -ENOMEM without freeing mad_priv. Fix this memory-leak problem by freeing mad_priv in this case. Fixes: 2c34e68f4261 ("IB/mad: Check and handle potential DMA mapping errors") Link: https://lore.kernel.org/r/20200612063824.180611-1-guofan5@huawei.com Signed-off-by: Fan Guo Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/mad.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index 186e0d652e8b..5e080191a725 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -2718,6 +2718,7 @@ static int ib_mad_post_receive_mads(struct ib_mad_qp_info *qp_info, DMA_FROM_DEVICE); if (unlikely(ib_dma_mapping_error(qp_info->port_priv->device, sg_list.addr))) { + kfree(mad_priv); ret = -ENOMEM; break; } From e0034433a7e4f1d74e86fe801f7c017b48f81315 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 15 Jun 2020 08:47:00 +0200 Subject: [PATCH 240/618] docs: device-mapper: add dm-ebs.rst to an index file Solves this Sphinx warning: Documentation/admin-guide/device-mapper/dm-ebs.rst: WARNING: document isn't included in any toctree Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Mike Snitzer --- Documentation/admin-guide/device-mapper/index.rst | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/admin-guide/device-mapper/index.rst b/Documentation/admin-guide/device-mapper/index.rst index ec62fcc8eece..6cf8adc86fa8 100644 --- a/Documentation/admin-guide/device-mapper/index.rst +++ b/Documentation/admin-guide/device-mapper/index.rst @@ -11,6 +11,7 @@ Device Mapper dm-clone dm-crypt dm-dust + dm-ebs dm-flakey dm-init dm-integrity From b38c0ad57f8e7810f2d994f49dab4ccb129cf31c Mon Sep 17 00:00:00 2001 From: Shin'ichiro Kawasaki Date: Thu, 18 Jun 2020 11:48:10 +0900 Subject: [PATCH 241/618] dm zoned: Fix metadata zone size check When dm zoned has multiple devices, metadata is on the cache device, not in random zones of the zoned devices. Then the number of metadata zones shall be checked with the number of cache zones, not random zones. Fixes: 34f5affd04c4 ("dm zoned: separate random and cache zones") Signed-off-by: Shin'ichiro Kawasaki Reviewed-by: Damien Le Moal Signed-off-by: Mike Snitzer --- drivers/md/dm-zoned-metadata.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/md/dm-zoned-metadata.c b/drivers/md/dm-zoned-metadata.c index 130b5a6d9f12..fc1329ca3e70 100644 --- a/drivers/md/dm-zoned-metadata.c +++ b/drivers/md/dm-zoned-metadata.c @@ -1078,7 +1078,8 @@ static int dmz_check_sb(struct dmz_metadata *zmd, struct dmz_sb *dsb, nr_meta_zones = (le32_to_cpu(sb->nr_meta_blocks) + zmd->zone_nr_blocks - 1) >> zmd->zone_nr_blocks_shift; if (!nr_meta_zones || - nr_meta_zones >= zmd->nr_rnd_zones) { + (zmd->nr_devs <= 1 && nr_meta_zones >= zmd->nr_rnd_zones) || + (zmd->nr_devs > 1 && nr_meta_zones >= zmd->nr_cache_zones)) { dmz_dev_err(dev, "Invalid number of metadata blocks"); return -ENXIO; } From 415c79e13b17ce5f0a0815bab4d584f75f4d1171 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Fri, 19 Jun 2020 15:59:04 +0900 Subject: [PATCH 242/618] dm: update original bio sector on Zone Append Naohiro reported that issuing zone-append bios to a zoned block device underneath a dm-linear device does not work as expected. This because we forgot to reverse-map the sector the device wrote to the original bio. For zone-append bios, get the offset in the zone of the written sector from the clone bio and add that to the original bio's sector position. Fixes: 0512a75b98f8 ("block: Introduce REQ_OP_ZONE_APPEND") Cc: stable@vger.kernel.org Reported-by: Naohiro Aota Signed-off-by: Johannes Thumshirn Reviewed-by: Damien Le Moal Signed-off-by: Mike Snitzer --- drivers/md/dm.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 109e81f33edb..e6807792fec8 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1009,6 +1009,7 @@ static void clone_endio(struct bio *bio) struct dm_io *io = tio->io; struct mapped_device *md = tio->io->md; dm_endio_fn endio = tio->ti->type->end_io; + struct bio *orig_bio = io->orig_bio; if (unlikely(error == BLK_STS_TARGET) && md->type != DM_TYPE_NVME_BIO_BASED) { if (bio_op(bio) == REQ_OP_DISCARD && @@ -1022,6 +1023,18 @@ static void clone_endio(struct bio *bio) disable_write_zeroes(md); } + /* + * For zone-append bios get offset in zone of the written + * sector and add that to the original bio sector pos. + */ + if (bio_op(orig_bio) == REQ_OP_ZONE_APPEND) { + sector_t written_sector = bio->bi_iter.bi_sector; + struct request_queue *q = orig_bio->bi_disk->queue; + u64 mask = (u64)blk_queue_zone_sectors(q) - 1; + + orig_bio->bi_iter.bi_sector += written_sector & mask; + } + if (endio) { int r = endio(tio->ti, bio, &error); switch (r) { From 3ee39573e567eded4f73e1e22216034bc29f3813 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Fri, 19 Jun 2020 16:49:55 +0900 Subject: [PATCH 243/618] dm zoned: Fix random zone reclaim selection Commit 2094045fe5b5 ("dm zoned: prefer full zones for reclaim") modified dmz_get_rnd_zone_for_reclaim() to add a search for the buffer zone with the heaviest weight as an optimal candidate for reclaim. This modification uses the zone pointer variabl "last" which is set only once and never modified as zones are scanned, resulting in the search being inefective. Furthermore, if the selected buffer zone at the end of the search loop is active or already locked for reclaim, dmz_get_rnd_zone_for_reclaim() returns NULL even if other random zones with a lesser weight can be reclaimed. To fix the search and to guarantee that reclaim can make forward progress, fix dmz_get_rnd_zone_for_reclaim() loop to correctly find the buffer zone with the heaviest weight using the variable maxw_z. Also make sure to fallback to finding the first random zone that can be reclaimed if this best candidate zone cannot be reclaimed. While at it, also fix the device index check to consider only random zones, ignoring cache zones belonging to the cache device if one is used as that device does not have a reclaim process. Fixes: 2094045fe5b5 ("dm zoned: prefer full zones for reclaim") Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Signed-off-by: Mike Snitzer --- drivers/md/dm-zoned-metadata.c | 35 ++++++++++++++++++++++++++-------- 1 file changed, 27 insertions(+), 8 deletions(-) diff --git a/drivers/md/dm-zoned-metadata.c b/drivers/md/dm-zoned-metadata.c index fc1329ca3e70..b40e643ddf73 100644 --- a/drivers/md/dm-zoned-metadata.c +++ b/drivers/md/dm-zoned-metadata.c @@ -1950,7 +1950,7 @@ static struct dm_zone *dmz_get_rnd_zone_for_reclaim(struct dmz_metadata *zmd, unsigned int idx, bool idle) { struct dm_zone *dzone = NULL; - struct dm_zone *zone, *last = NULL; + struct dm_zone *zone, *maxw_z = NULL; struct list_head *zone_list; /* If we have cache zones select from the cache zone list */ @@ -1962,18 +1962,37 @@ static struct dm_zone *dmz_get_rnd_zone_for_reclaim(struct dmz_metadata *zmd, } else zone_list = &zmd->dev[idx].map_rnd_list; + /* + * Find the buffer zone with the heaviest weight or the first (oldest) + * data zone that can be reclaimed. + */ list_for_each_entry(zone, zone_list, link) { if (dmz_is_buf(zone)) { dzone = zone->bzone; - if (dzone->dev->dev_idx != idx) + if (dmz_is_rnd(dzone) && dzone->dev->dev_idx != idx) continue; - if (!last) { - last = dzone; + if (!maxw_z || maxw_z->weight < dzone->weight) + maxw_z = dzone; + } else { + dzone = zone; + if (dmz_lock_zone_reclaim(dzone)) + return dzone; + } + } + + if (maxw_z && dmz_lock_zone_reclaim(maxw_z)) + return maxw_z; + + /* + * If we come here, none of the zones inspected could be locked for + * reclaim. Try again, being more aggressive, that is, find the + * first zone that can be reclaimed regardless of its weitght. + */ + list_for_each_entry(zone, zone_list, link) { + if (dmz_is_buf(zone)) { + dzone = zone->bzone; + if (dmz_is_rnd(dzone) && dzone->dev->dev_idx != idx) continue; - } - if (last->weight < dzone->weight) - continue; - dzone = last; } else dzone = zone; if (dmz_lock_zone_reclaim(dzone)) From f2cd9a5e85dc25e10f6318bc6fbcb7dcff262561 Mon Sep 17 00:00:00 2001 From: Shin'ichiro Kawasaki Date: Fri, 19 Jun 2020 16:49:56 +0900 Subject: [PATCH 244/618] dm zoned: Fix reclaim zone selection When dm zoned has multiple devices, random zones are never selected for reclaim if all reserved sequential write zones are in use and no sequential write required zones can be selected for reclaim. This can lead to deadlocks as selecting a cache zone allows reclaiming a sequential zone, ensuring forward progress. Fix this by always defaulting to selecting a random zone when no sequential write required zone can be selected. [Damien: fix commit message] Signed-off-by: Shin'ichiro Kawasaki Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Signed-off-by: Mike Snitzer --- drivers/md/dm-zoned-metadata.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-zoned-metadata.c b/drivers/md/dm-zoned-metadata.c index b40e643ddf73..5cf6f5f552e0 100644 --- a/drivers/md/dm-zoned-metadata.c +++ b/drivers/md/dm-zoned-metadata.c @@ -2026,7 +2026,7 @@ static struct dm_zone *dmz_get_seq_zone_for_reclaim(struct dmz_metadata *zmd, struct dm_zone *dmz_get_zone_for_reclaim(struct dmz_metadata *zmd, unsigned int dev_idx, bool idle) { - struct dm_zone *zone; + struct dm_zone *zone = NULL; /* * Search for a zone candidate to reclaim: 2 cases are possible. @@ -2039,7 +2039,7 @@ struct dm_zone *dmz_get_zone_for_reclaim(struct dmz_metadata *zmd, dmz_lock_map(zmd); if (list_empty(&zmd->reserved_seq_zones_list)) zone = dmz_get_seq_zone_for_reclaim(zmd, dev_idx); - else + if (!zone) zone = dmz_get_rnd_zone_for_reclaim(zmd, dev_idx, idle); dmz_unlock_map(zmd); From bb5570ad3b54e7930997aec76ab68256d5236d94 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Thu, 18 Jun 2020 11:20:02 +0100 Subject: [PATCH 245/618] x86/asm/64: Align start of __clear_user() loop to 16-bytes x86 CPUs can suffer severe performance drops if a tight loop, such as the ones in __clear_user(), straddles a 16-byte instruction fetch window, or worse, a 64-byte cacheline. This issues was discovered in the SUSE kernel with the following commit, 1153933703d9 ("x86/asm/64: Micro-optimize __clear_user() - Use immediate constants") which increased the code object size from 10 bytes to 15 bytes and caused the 8-byte copy loop in __clear_user() to be split across a 64-byte cacheline. Aligning the start of the loop to 16-bytes makes this fit neatly inside a single instruction fetch window again and restores the performance of __clear_user() which is used heavily when reading from /dev/zero. Here are some numbers from running libmicro's read_z* and pread_z* microbenchmarks which read from /dev/zero: Zen 1 (Naples) libmicro-file 5.7.0-rc6 5.7.0-rc6 5.7.0-rc6 revert-1153933703d9+ align16+ Time mean95-pread_z100k 9.9195 ( 0.00%) 5.9856 ( 39.66%) 5.9938 ( 39.58%) Time mean95-pread_z10k 1.1378 ( 0.00%) 0.7450 ( 34.52%) 0.7467 ( 34.38%) Time mean95-pread_z1k 0.2623 ( 0.00%) 0.2251 ( 14.18%) 0.2252 ( 14.15%) Time mean95-pread_zw100k 9.9974 ( 0.00%) 6.0648 ( 39.34%) 6.0756 ( 39.23%) Time mean95-read_z100k 9.8940 ( 0.00%) 5.9885 ( 39.47%) 5.9994 ( 39.36%) Time mean95-read_z10k 1.1394 ( 0.00%) 0.7483 ( 34.33%) 0.7482 ( 34.33%) Note that this doesn't affect Haswell or Broadwell microarchitectures which seem to avoid the alignment issue by executing the loop straight out of the Loop Stream Detector (verified using perf events). Fixes: 1153933703d9 ("x86/asm/64: Micro-optimize __clear_user() - Use immediate constants") Signed-off-by: Matt Fleming Signed-off-by: Borislav Petkov Cc: # v4.19+ Link: https://lkml.kernel.org/r/20200618102002.30034-1-matt@codeblueprint.co.uk --- arch/x86/lib/usercopy_64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c index fff28c6f73a2..b0dfac3d3df7 100644 --- a/arch/x86/lib/usercopy_64.c +++ b/arch/x86/lib/usercopy_64.c @@ -24,6 +24,7 @@ unsigned long __clear_user(void __user *addr, unsigned long size) asm volatile( " testq %[size8],%[size8]\n" " jz 4f\n" + " .align 16\n" "0: movq $0,(%[dst])\n" " addq $8,%[dst]\n" " decl %%ecx ; jnz 0b\n" From d35bd764e6899a7bea71958f08d16cea5bfa1919 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 19 Jun 2020 11:51:34 -0400 Subject: [PATCH 246/618] dm writecache: add cond_resched to loop in persistent_memory_claim() Add cond_resched() to a loop that fills in the mapper memory area because the loop can be executed many times. Fixes: 48debafe4f2fe ("dm: add writecache target") Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- drivers/md/dm-writecache.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/md/dm-writecache.c b/drivers/md/dm-writecache.c index 6b28990b1d84..30505d70f423 100644 --- a/drivers/md/dm-writecache.c +++ b/drivers/md/dm-writecache.c @@ -282,6 +282,8 @@ static int persistent_memory_claim(struct dm_writecache *wc) while (daa-- && i < p) { pages[i++] = pfn_t_to_page(pfn); pfn.val++; + if (!(i & 15)) + cond_resched(); } } while (i < p); wc->memory_map = vmap(pages, p, VM_MAP, PAGE_KERNEL); From 24f5aa53afbf72ffd7d2587cd2edd44342e0270f Mon Sep 17 00:00:00 2001 From: Flavio Suligoi Date: Fri, 19 Jun 2020 11:02:04 +0200 Subject: [PATCH 247/618] net: ethernet: neterion: vxge: fix spelling mistake Fix typo: "trigered" --> "triggered" Signed-off-by: Flavio Suligoi Signed-off-by: David S. Miller --- drivers/net/ethernet/neterion/vxge/vxge-config.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/neterion/vxge/vxge-config.h b/drivers/net/ethernet/neterion/vxge/vxge-config.h index 628fa9b2f741..373165119850 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-config.h +++ b/drivers/net/ethernet/neterion/vxge/vxge-config.h @@ -297,7 +297,7 @@ struct vxge_hw_fifo_config { * @greedy_return: If Set it forces the device to return absolutely all RxD * that are consumed and still on board when a timer interrupt * triggers. If Clear, then if the device has already returned - * RxD before current timer interrupt trigerred and after the + * RxD before current timer interrupt triggered and after the * previous timer interrupt triggered, then the device is not * forced to returned the rest of the consumed RxD that it has * on board which account for a byte count less than the one From e2c0b9712452296cb50a9faf07cc688862238f24 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Tue, 16 Jun 2020 08:47:32 +0200 Subject: [PATCH 248/618] docs: net: ieee802154: change link to new project URL We finally came around to setup a new project website. Update the reference here. Signed-off-by: Stefan Schmidt --- Documentation/networking/ieee802154.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/networking/ieee802154.rst b/Documentation/networking/ieee802154.rst index 36ca823a1122..6f4bf8447a21 100644 --- a/Documentation/networking/ieee802154.rst +++ b/Documentation/networking/ieee802154.rst @@ -30,8 +30,8 @@ Socket API The address family, socket addresses etc. are defined in the include/net/af_ieee802154.h header or in the special header -in the userspace package (see either http://wpan.cakelab.org/ or the -git tree at https://github.com/linux-wpan/wpan-tools). +in the userspace package (see either https://linux-wpan.org/wpan-tools.html +or the git tree at https://github.com/linux-wpan/wpan-tools). 6LoWPAN Linux implementation ============================ From e795a61a85e65b4f12c2ed3529911ac0f013fa40 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Tue, 16 Jun 2020 08:49:10 +0200 Subject: [PATCH 249/618] MAINTAINERS: update ieee802154 project website URL Update URL to our new home. Signed-off-by: Stefan Schmidt --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 301330e02bca..a09e61268c08 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8333,7 +8333,7 @@ M: Alexander Aring M: Stefan Schmidt L: linux-wpan@vger.kernel.org S: Maintained -W: http://wpan.cakelab.org/ +W: https://linux-wpan.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next.git F: Documentation/networking/ieee802154.rst From 6564cfefb01c4c5b8c357f300feac5cb1585e1a9 Mon Sep 17 00:00:00 2001 From: Flavio Suligoi Date: Fri, 19 Jun 2020 11:18:11 +0200 Subject: [PATCH 250/618] net: ethernet: oki-semi: pch_gbe: fix spelling mistake Fix typo: "Triger" --> "Trigger" Signed-off-by: Flavio Suligoi Signed-off-by: David S. Miller --- drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h index 32b9d7705404..55cef5b16aa5 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h @@ -147,7 +147,7 @@ struct pch_gbe_regs { #define PCH_GBE_RH_ALM_FULL_8 0x00001000 /* 8 words */ #define PCH_GBE_RH_ALM_FULL_16 0x00002000 /* 16 words */ #define PCH_GBE_RH_ALM_FULL_32 0x00003000 /* 32 words */ -/* RX FIFO Read Triger Threshold */ +/* RX FIFO Read Trigger Threshold */ #define PCH_GBE_RH_RD_TRG_4 0x00000000 /* 4 words */ #define PCH_GBE_RH_RD_TRG_8 0x00000200 /* 8 words */ #define PCH_GBE_RH_RD_TRG_16 0x00000400 /* 16 words */ From 5a8d7f126c97d04d893f5e5be2b286437a0d01b0 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 19 Jun 2020 11:47:46 -0700 Subject: [PATCH 251/618] of: of_mdio: Correct loop scanning logic Commit 209c65b61d94 ("drivers/of/of_mdio.c:fix of_mdiobus_register()") introduced a break of the loop on the premise that a successful registration should exit the loop. The premise is correct but not to code, because rc && rc != -ENODEV is just a special error condition, that means we would exit the loop even with rc == -ENODEV which is absolutely not correct since this is the error code to indicate to the MDIO bus layer that scanning should continue. Fix this by explicitly checking for rc = 0 as the only valid condition to break out of the loop. Fixes: 209c65b61d94 ("drivers/of/of_mdio.c:fix of_mdiobus_register()") Reviewed-by: Andrew Lunn Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/of/of_mdio.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index a04afe79529c..ef6f818ce5b3 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -314,10 +314,15 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) child, addr); if (of_mdiobus_child_is_phy(child)) { + /* -ENODEV is the return code that PHYLIB has + * standardized on to indicate that bus + * scanning should continue. + */ rc = of_mdiobus_register_phy(mdio, child, addr); - if (rc && rc != -ENODEV) + if (!rc) + break; + if (rc != -ENODEV) goto unregister; - break; } } } From b2ffc75e2e990b09903f9d15ccd53bc5f3a4217c Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 19 Jun 2020 11:47:47 -0700 Subject: [PATCH 252/618] net: phy: Check harder for errors in get_phy_id() Commit 02a6efcab675 ("net: phy: allow scanning busses with missing phys") added a special condition to return -ENODEV in case -ENODEV or -EIO was returned from the first read of the MII_PHYSID1 register. In case the MDIO bus data line pull-up is not strong enough, the MDIO bus controller will not flag this as a read error. This can happen when a pluggable daughter card is not connected and weak internal pull-ups are used (since that is the only option, otherwise the pins are floating). The second read of MII_PHYSID2 will be correctly flagged an error though, but now we will return -EIO which will be treated as a hard error, thus preventing MDIO bus scanning loops to continue succesfully. Apply the same logic to both register reads, thus allowing the scanning logic to proceed. Fixes: 02a6efcab675 ("net: phy: allow scanning busses with missing phys") Reviewed-by: Andrew Lunn Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 04946de74fa0..85ba95b598b5 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -794,8 +794,10 @@ static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id, /* Grab the bits from PHYIR2, and put them in the lower half */ phy_reg = mdiobus_read(bus, addr, MII_PHYSID2); - if (phy_reg < 0) - return -EIO; + if (phy_reg < 0) { + /* returning -ENODEV doesn't stop bus scanning */ + return (phy_reg == -EIO || phy_reg == -ENODEV) ? -ENODEV : -EIO; + } *phy_id |= phy_reg; From faa620876b01d6744f1599e279042bb8149247ab Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Thu, 18 Jun 2020 11:37:40 +0300 Subject: [PATCH 253/618] net: macb: undo operations in case of failure Undo previously done operation in case macb_phylink_connect() fails. Since macb_reset_hw() is the 1st undo operation the napi_exit label was renamed to reset_hw. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Claudiu Beznea Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 67933079aeea..257c4920cb88 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -2558,7 +2558,7 @@ static int macb_open(struct net_device *dev) err = macb_phylink_connect(bp); if (err) - goto napi_exit; + goto reset_hw; netif_tx_start_all_queues(dev); @@ -2567,9 +2567,11 @@ static int macb_open(struct net_device *dev) return 0; -napi_exit: +reset_hw: + macb_reset_hw(bp); for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue) napi_disable(&queue->napi); + macb_free_consistent(bp); pm_exit: pm_runtime_put_sync(&bp->pdev->dev); return err; From 9deba33f1b7266a3870c9da31f787b605748fc0c Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Thu, 18 Jun 2020 12:16:52 +0300 Subject: [PATCH 254/618] enetc: Fix HW_VLAN_CTAG_TX|RX toggling VLAN tag insertion/extraction offload is correctly activated at probe time but deactivation of this feature (i.e. via ethtool) is broken. Toggling works only for Tx/Rx ring 0 of a PF, and is ignored for the other rings, including the VF rings. To fix this, the existing VLAN offload toggling code was extended to all the rings assigned to a netdevice, instead of the default ring 0 (likely a leftover from the early validation days of this feature). And the code was moved to the common set_features() function to fix toggling for the VF driver too. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/enetc/enetc.c | 26 +++++++++++++++++++ .../net/ethernet/freescale/enetc/enetc_hw.h | 16 ++++++------ .../net/ethernet/freescale/enetc/enetc_pf.c | 8 ------ 3 files changed, 34 insertions(+), 16 deletions(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c index 298c55786fd9..96831f49925c 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc.c +++ b/drivers/net/ethernet/freescale/enetc/enetc.c @@ -1595,6 +1595,24 @@ static int enetc_set_psfp(struct net_device *ndev, int en) return 0; } +static void enetc_enable_rxvlan(struct net_device *ndev, bool en) +{ + struct enetc_ndev_priv *priv = netdev_priv(ndev); + int i; + + for (i = 0; i < priv->num_rx_rings; i++) + enetc_bdr_enable_rxvlan(&priv->si->hw, i, en); +} + +static void enetc_enable_txvlan(struct net_device *ndev, bool en) +{ + struct enetc_ndev_priv *priv = netdev_priv(ndev); + int i; + + for (i = 0; i < priv->num_tx_rings; i++) + enetc_bdr_enable_txvlan(&priv->si->hw, i, en); +} + int enetc_set_features(struct net_device *ndev, netdev_features_t features) { @@ -1604,6 +1622,14 @@ int enetc_set_features(struct net_device *ndev, if (changed & NETIF_F_RXHASH) enetc_set_rss(ndev, !!(features & NETIF_F_RXHASH)); + if (changed & NETIF_F_HW_VLAN_CTAG_RX) + enetc_enable_rxvlan(ndev, + !!(features & NETIF_F_HW_VLAN_CTAG_RX)); + + if (changed & NETIF_F_HW_VLAN_CTAG_TX) + enetc_enable_txvlan(ndev, + !!(features & NETIF_F_HW_VLAN_CTAG_TX)); + if (changed & NETIF_F_HW_TC) err = enetc_set_psfp(ndev, !!(features & NETIF_F_HW_TC)); diff --git a/drivers/net/ethernet/freescale/enetc/enetc_hw.h b/drivers/net/ethernet/freescale/enetc/enetc_hw.h index 6314051bc6c1..ce0d321c0639 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h +++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h @@ -531,22 +531,22 @@ struct enetc_msg_cmd_header { /* Common H/W utility functions */ -static inline void enetc_enable_rxvlan(struct enetc_hw *hw, int si_idx, - bool en) +static inline void enetc_bdr_enable_rxvlan(struct enetc_hw *hw, int idx, + bool en) { - u32 val = enetc_rxbdr_rd(hw, si_idx, ENETC_RBMR); + u32 val = enetc_rxbdr_rd(hw, idx, ENETC_RBMR); val = (val & ~ENETC_RBMR_VTE) | (en ? ENETC_RBMR_VTE : 0); - enetc_rxbdr_wr(hw, si_idx, ENETC_RBMR, val); + enetc_rxbdr_wr(hw, idx, ENETC_RBMR, val); } -static inline void enetc_enable_txvlan(struct enetc_hw *hw, int si_idx, - bool en) +static inline void enetc_bdr_enable_txvlan(struct enetc_hw *hw, int idx, + bool en) { - u32 val = enetc_txbdr_rd(hw, si_idx, ENETC_TBMR); + u32 val = enetc_txbdr_rd(hw, idx, ENETC_TBMR); val = (val & ~ENETC_TBMR_VIH) | (en ? ENETC_TBMR_VIH : 0); - enetc_txbdr_wr(hw, si_idx, ENETC_TBMR, val); + enetc_txbdr_wr(hw, idx, ENETC_TBMR, val); } static inline void enetc_set_bdr_prio(struct enetc_hw *hw, int bdr_idx, diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index 824d211ec00f..4fac57dbb3c8 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -649,14 +649,6 @@ static int enetc_pf_set_features(struct net_device *ndev, netdev_features_t changed = ndev->features ^ features; struct enetc_ndev_priv *priv = netdev_priv(ndev); - if (changed & NETIF_F_HW_VLAN_CTAG_RX) - enetc_enable_rxvlan(&priv->si->hw, 0, - !!(features & NETIF_F_HW_VLAN_CTAG_RX)); - - if (changed & NETIF_F_HW_VLAN_CTAG_TX) - enetc_enable_txvlan(&priv->si->hw, 0, - !!(features & NETIF_F_HW_VLAN_CTAG_TX)); - if (changed & NETIF_F_HW_VLAN_CTAG_FILTER) { struct enetc_pf *pf = enetc_si_priv(priv->si); From 56c09de347e40804fc8dad155272fb9609e0a97b Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Thu, 18 Jun 2020 12:13:22 +0200 Subject: [PATCH 255/618] geneve: allow changing DF behavior after creation Currently, trying to change the DF parameter of a geneve device does nothing: # ip -d link show geneve1 14: geneve1: link/ether geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 # ip link set geneve1 type geneve id 1 df unset # ip -d link show geneve1 14: geneve1: link/ether geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 We just need to update the value in geneve_changelink. Fixes: a025fb5f49ad ("geneve: Allow configuration of DF behaviour") Signed-off-by: Sabrina Dubroca Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller --- drivers/net/geneve.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 75266580b586..4661ef865807 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -1649,6 +1649,7 @@ static int geneve_changelink(struct net_device *dev, struct nlattr *tb[], geneve->collect_md = metadata; geneve->use_udp6_rx_checksums = use_udp6_rx_checksums; geneve->ttl_inherit = ttl_inherit; + geneve->df = df; geneve_unquiesce(geneve, gs4, gs6); return 0; From 26f2eb27d081081dbea6d3c11602c9ece36f4d9c Mon Sep 17 00:00:00 2001 From: wenxu Date: Thu, 18 Jun 2020 20:49:08 +0800 Subject: [PATCH 256/618] flow_offload: add flow_indr_block_cb_alloc/remove function Add flow_indr_block_cb_alloc/remove function for next fix patch. Signed-off-by: wenxu Signed-off-by: David S. Miller --- include/net/flow_offload.h | 13 +++++++++++++ net/core/flow_offload.c | 21 +++++++++++++++++++++ 2 files changed, 34 insertions(+) diff --git a/include/net/flow_offload.h b/include/net/flow_offload.h index f2c8311a0433..bf4343042956 100644 --- a/include/net/flow_offload.h +++ b/include/net/flow_offload.h @@ -467,6 +467,12 @@ struct flow_block_cb { struct flow_block_cb *flow_block_cb_alloc(flow_setup_cb_t *cb, void *cb_ident, void *cb_priv, void (*release)(void *cb_priv)); +struct flow_block_cb *flow_indr_block_cb_alloc(flow_setup_cb_t *cb, + void *cb_ident, void *cb_priv, + void (*release)(void *cb_priv), + struct flow_block_offload *bo, + struct net_device *dev, void *data, + void (*cleanup)(struct flow_block_cb *block_cb)); void flow_block_cb_free(struct flow_block_cb *block_cb); struct flow_block_cb *flow_block_cb_lookup(struct flow_block *block, @@ -488,6 +494,13 @@ static inline void flow_block_cb_remove(struct flow_block_cb *block_cb, list_move(&block_cb->list, &offload->cb_list); } +static inline void flow_indr_block_cb_remove(struct flow_block_cb *block_cb, + struct flow_block_offload *offload) +{ + list_del(&block_cb->indr.list); + list_move(&block_cb->list, &offload->cb_list); +} + bool flow_block_cb_is_busy(flow_setup_cb_t *cb, void *cb_ident, struct list_head *driver_block_list); diff --git a/net/core/flow_offload.c b/net/core/flow_offload.c index 0cfc35e6be28..1fd781d155b4 100644 --- a/net/core/flow_offload.c +++ b/net/core/flow_offload.c @@ -437,6 +437,27 @@ static void flow_block_indr_init(struct flow_block_cb *flow_block, flow_block->indr.cleanup = cleanup; } +struct flow_block_cb *flow_indr_block_cb_alloc(flow_setup_cb_t *cb, + void *cb_ident, void *cb_priv, + void (*release)(void *cb_priv), + struct flow_block_offload *bo, + struct net_device *dev, void *data, + void (*cleanup)(struct flow_block_cb *block_cb)) +{ + struct flow_block_cb *block_cb; + + block_cb = flow_block_cb_alloc(cb, cb_ident, cb_priv, release); + if (IS_ERR(block_cb)) + goto out; + + flow_block_indr_init(block_cb, bo, dev, data, cleanup); + list_add(&block_cb->indr.list, &flow_block_indr_list); + +out: + return block_cb; +} +EXPORT_SYMBOL(flow_indr_block_cb_alloc); + static void __flow_block_indr_binding(struct flow_block_offload *bo, struct net_device *dev, void *data, void (*cleanup)(struct flow_block_cb *block_cb)) From 66f1939a1b705305df820d65f4d9a8457d05759c Mon Sep 17 00:00:00 2001 From: wenxu Date: Thu, 18 Jun 2020 20:49:09 +0800 Subject: [PATCH 257/618] flow_offload: use flow_indr_block_cb_alloc/remove function Prepare fix the bug in the next patch. use flow_indr_block_cb_alloc/remove function and remove the __flow_block_indr_binding. Signed-off-by: wenxu Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c | 19 ++++++++++------ .../ethernet/mellanox/mlx5/core/en/rep/tc.c | 21 ++++++++++++------ .../net/ethernet/netronome/nfp/flower/main.h | 4 +++- .../ethernet/netronome/nfp/flower/offload.c | 18 +++++++++------ include/net/flow_offload.h | 4 +++- net/core/flow_offload.c | 22 +------------------ 6 files changed, 44 insertions(+), 44 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c index 0eef4f5e4a46..3e3a8841689d 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c @@ -1889,7 +1889,8 @@ static void bnxt_tc_setup_indr_rel(void *cb_priv) } static int bnxt_tc_setup_indr_block(struct net_device *netdev, struct bnxt *bp, - struct flow_block_offload *f) + struct flow_block_offload *f, void *data, + void (*cleanup)(struct flow_block_cb *block_cb)) { struct bnxt_flower_indr_block_cb_priv *cb_priv; struct flow_block_cb *block_cb; @@ -1907,9 +1908,10 @@ static int bnxt_tc_setup_indr_block(struct net_device *netdev, struct bnxt *bp, cb_priv->bp = bp; list_add(&cb_priv->list, &bp->tc_indr_block_list); - block_cb = flow_block_cb_alloc(bnxt_tc_setup_indr_block_cb, - cb_priv, cb_priv, - bnxt_tc_setup_indr_rel); + block_cb = flow_indr_block_cb_alloc(bnxt_tc_setup_indr_block_cb, + cb_priv, cb_priv, + bnxt_tc_setup_indr_rel, f, + netdev, data, cleanup); if (IS_ERR(block_cb)) { list_del(&cb_priv->list); kfree(cb_priv); @@ -1930,7 +1932,7 @@ static int bnxt_tc_setup_indr_block(struct net_device *netdev, struct bnxt *bp, if (!block_cb) return -ENOENT; - flow_block_cb_remove(block_cb, f); + flow_indr_block_cb_remove(block_cb, f); list_del(&block_cb->driver_list); break; default: @@ -1945,14 +1947,17 @@ static bool bnxt_is_netdev_indr_offload(struct net_device *netdev) } static int bnxt_tc_setup_indr_cb(struct net_device *netdev, void *cb_priv, - enum tc_setup_type type, void *type_data) + enum tc_setup_type type, void *type_data, + void *data, + void (*cleanup)(struct flow_block_cb *block_cb)) { if (!bnxt_is_netdev_indr_offload(netdev)) return -EOPNOTSUPP; switch (type) { case TC_SETUP_BLOCK: - return bnxt_tc_setup_indr_block(netdev, cb_priv, type_data); + return bnxt_tc_setup_indr_block(netdev, cb_priv, type_data, data, + cleanup); default: break; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c index 80713123de5c..d629864fc996 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c @@ -407,7 +407,9 @@ static int mlx5e_rep_indr_setup_block(struct net_device *netdev, struct mlx5e_rep_priv *rpriv, struct flow_block_offload *f, - flow_setup_cb_t *setup_cb) + flow_setup_cb_t *setup_cb, + void *data, + void (*cleanup)(struct flow_block_cb *block_cb)) { struct mlx5e_priv *priv = netdev_priv(rpriv->netdev); struct mlx5e_rep_indr_block_priv *indr_priv; @@ -438,8 +440,9 @@ mlx5e_rep_indr_setup_block(struct net_device *netdev, list_add(&indr_priv->list, &rpriv->uplink_priv.tc_indr_block_priv_list); - block_cb = flow_block_cb_alloc(setup_cb, indr_priv, indr_priv, - mlx5e_rep_indr_block_unbind); + block_cb = flow_indr_block_cb_alloc(setup_cb, indr_priv, indr_priv, + mlx5e_rep_indr_block_unbind, + f, netdev, data, cleanup); if (IS_ERR(block_cb)) { list_del(&indr_priv->list); kfree(indr_priv); @@ -458,7 +461,7 @@ mlx5e_rep_indr_setup_block(struct net_device *netdev, if (!block_cb) return -ENOENT; - flow_block_cb_remove(block_cb, f); + flow_indr_block_cb_remove(block_cb, f); list_del(&block_cb->driver_list); return 0; default: @@ -469,15 +472,19 @@ mlx5e_rep_indr_setup_block(struct net_device *netdev, static int mlx5e_rep_indr_setup_cb(struct net_device *netdev, void *cb_priv, - enum tc_setup_type type, void *type_data) + enum tc_setup_type type, void *type_data, + void *data, + void (*cleanup)(struct flow_block_cb *block_cb)) { switch (type) { case TC_SETUP_BLOCK: return mlx5e_rep_indr_setup_block(netdev, cb_priv, type_data, - mlx5e_rep_indr_setup_tc_cb); + mlx5e_rep_indr_setup_tc_cb, + data, cleanup); case TC_SETUP_FT: return mlx5e_rep_indr_setup_block(netdev, cb_priv, type_data, - mlx5e_rep_indr_setup_ft_cb); + mlx5e_rep_indr_setup_ft_cb, + data, cleanup); default: return -EOPNOTSUPP; } diff --git a/drivers/net/ethernet/netronome/nfp/flower/main.h b/drivers/net/ethernet/netronome/nfp/flower/main.h index 6c3dc3baf387..56b3b68e273e 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/main.h +++ b/drivers/net/ethernet/netronome/nfp/flower/main.h @@ -459,7 +459,9 @@ int nfp_flower_setup_qos_offload(struct nfp_app *app, struct net_device *netdev, struct tc_cls_matchall_offload *flow); void nfp_flower_stats_rlim_reply(struct nfp_app *app, struct sk_buff *skb); int nfp_flower_indr_setup_tc_cb(struct net_device *netdev, void *cb_priv, - enum tc_setup_type type, void *type_data); + enum tc_setup_type type, void *type_data, + void *data, + void (*cleanup)(struct flow_block_cb *block_cb)); int nfp_flower_setup_indr_block_cb(enum tc_setup_type type, void *type_data, void *cb_priv); diff --git a/drivers/net/ethernet/netronome/nfp/flower/offload.c b/drivers/net/ethernet/netronome/nfp/flower/offload.c index 695d24b9dd92..95c75250c355 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/offload.c +++ b/drivers/net/ethernet/netronome/nfp/flower/offload.c @@ -1647,7 +1647,8 @@ static void nfp_flower_setup_indr_tc_release(void *cb_priv) static int nfp_flower_setup_indr_tc_block(struct net_device *netdev, struct nfp_app *app, - struct flow_block_offload *f) + struct flow_block_offload *f, void *data, + void (*cleanup)(struct flow_block_cb *block_cb)) { struct nfp_flower_indr_block_cb_priv *cb_priv; struct nfp_flower_priv *priv = app->priv; @@ -1676,9 +1677,10 @@ nfp_flower_setup_indr_tc_block(struct net_device *netdev, struct nfp_app *app, cb_priv->app = app; list_add(&cb_priv->list, &priv->indr_block_cb_priv); - block_cb = flow_block_cb_alloc(nfp_flower_setup_indr_block_cb, - cb_priv, cb_priv, - nfp_flower_setup_indr_tc_release); + block_cb = flow_indr_block_cb_alloc(nfp_flower_setup_indr_block_cb, + cb_priv, cb_priv, + nfp_flower_setup_indr_tc_release, + f, netdev, data, cleanup); if (IS_ERR(block_cb)) { list_del(&cb_priv->list); kfree(cb_priv); @@ -1699,7 +1701,7 @@ nfp_flower_setup_indr_tc_block(struct net_device *netdev, struct nfp_app *app, if (!block_cb) return -ENOENT; - flow_block_cb_remove(block_cb, f); + flow_indr_block_cb_remove(block_cb, f); list_del(&block_cb->driver_list); return 0; default: @@ -1710,7 +1712,9 @@ nfp_flower_setup_indr_tc_block(struct net_device *netdev, struct nfp_app *app, int nfp_flower_indr_setup_tc_cb(struct net_device *netdev, void *cb_priv, - enum tc_setup_type type, void *type_data) + enum tc_setup_type type, void *type_data, + void *data, + void (*cleanup)(struct flow_block_cb *block_cb)) { if (!nfp_fl_is_netdev_to_offload(netdev)) return -EOPNOTSUPP; @@ -1718,7 +1722,7 @@ nfp_flower_indr_setup_tc_cb(struct net_device *netdev, void *cb_priv, switch (type) { case TC_SETUP_BLOCK: return nfp_flower_setup_indr_tc_block(netdev, cb_priv, - type_data); + type_data, data, cleanup); default: return -EOPNOTSUPP; } diff --git a/include/net/flow_offload.h b/include/net/flow_offload.h index bf4343042956..1961c7982273 100644 --- a/include/net/flow_offload.h +++ b/include/net/flow_offload.h @@ -545,7 +545,9 @@ static inline void flow_block_init(struct flow_block *flow_block) } typedef int flow_indr_block_bind_cb_t(struct net_device *dev, void *cb_priv, - enum tc_setup_type type, void *type_data); + enum tc_setup_type type, void *type_data, + void *data, + void (*cleanup)(struct flow_block_cb *block_cb)); int flow_indr_dev_register(flow_indr_block_bind_cb_t *cb, void *cb_priv); void flow_indr_dev_unregister(flow_indr_block_bind_cb_t *cb, void *cb_priv, diff --git a/net/core/flow_offload.c b/net/core/flow_offload.c index 1fd781d155b4..ddd958c6040e 100644 --- a/net/core/flow_offload.c +++ b/net/core/flow_offload.c @@ -458,25 +458,6 @@ struct flow_block_cb *flow_indr_block_cb_alloc(flow_setup_cb_t *cb, } EXPORT_SYMBOL(flow_indr_block_cb_alloc); -static void __flow_block_indr_binding(struct flow_block_offload *bo, - struct net_device *dev, void *data, - void (*cleanup)(struct flow_block_cb *block_cb)) -{ - struct flow_block_cb *block_cb; - - list_for_each_entry(block_cb, &bo->cb_list, list) { - switch (bo->command) { - case FLOW_BLOCK_BIND: - flow_block_indr_init(block_cb, bo, dev, data, cleanup); - list_add(&block_cb->indr.list, &flow_block_indr_list); - break; - case FLOW_BLOCK_UNBIND: - list_del(&block_cb->indr.list); - break; - } - } -} - int flow_indr_dev_setup_offload(struct net_device *dev, enum tc_setup_type type, void *data, struct flow_block_offload *bo, @@ -486,9 +467,8 @@ int flow_indr_dev_setup_offload(struct net_device *dev, mutex_lock(&flow_indr_block_lock); list_for_each_entry(this, &flow_block_indr_dev_list, list) - this->cb(dev, this->cb_priv, type, bo); + this->cb(dev, this->cb_priv, type, bo, data, cleanup); - __flow_block_indr_binding(bo, dev, data, cleanup); mutex_unlock(&flow_indr_block_lock); return list_empty(&bo->cb_list) ? -EOPNOTSUPP : 0; From a1db217861f33b8d9ea8171bcacee51186e2d5ba Mon Sep 17 00:00:00 2001 From: wenxu Date: Thu, 18 Jun 2020 20:49:10 +0800 Subject: [PATCH 258/618] net: flow_offload: fix flow_indr_dev_unregister path If the representor is removed, then identify the indirect flow_blocks that need to be removed by the release callback and the port representor structure. To identify the port representor structure, a new indr.cb_priv field needs to be introduced. The flow_block also needs to be removed from the driver list from the cleanup path. Fixes: 1fac52da5942 ("net: flow_offload: consolidate indirect flow_block infrastructure") Signed-off-by: wenxu Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c | 4 ++-- .../net/ethernet/mellanox/mlx5/core/en/rep/tc.c | 5 +++-- drivers/net/ethernet/netronome/nfp/flower/main.c | 2 +- drivers/net/ethernet/netronome/nfp/flower/main.h | 3 +-- .../net/ethernet/netronome/nfp/flower/offload.c | 8 ++++---- include/net/flow_offload.h | 4 +++- net/core/flow_offload.c | 16 ++++++++++------ net/netfilter/nf_flow_table_offload.c | 1 + net/netfilter/nf_tables_offload.c | 1 + net/sched/cls_api.c | 1 + 10 files changed, 27 insertions(+), 18 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c index 3e3a8841689d..4a11c1e7cc02 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c @@ -1911,7 +1911,7 @@ static int bnxt_tc_setup_indr_block(struct net_device *netdev, struct bnxt *bp, block_cb = flow_indr_block_cb_alloc(bnxt_tc_setup_indr_block_cb, cb_priv, cb_priv, bnxt_tc_setup_indr_rel, f, - netdev, data, cleanup); + netdev, data, bp, cleanup); if (IS_ERR(block_cb)) { list_del(&cb_priv->list); kfree(cb_priv); @@ -2079,7 +2079,7 @@ void bnxt_shutdown_tc(struct bnxt *bp) return; flow_indr_dev_unregister(bnxt_tc_setup_indr_cb, bp, - bnxt_tc_setup_indr_block_cb); + bnxt_tc_setup_indr_rel); rhashtable_destroy(&tc_info->flow_table); rhashtable_destroy(&tc_info->l2_table); rhashtable_destroy(&tc_info->decap_l2_table); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c index d629864fc996..eefeb1cdc2ee 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c @@ -442,7 +442,8 @@ mlx5e_rep_indr_setup_block(struct net_device *netdev, block_cb = flow_indr_block_cb_alloc(setup_cb, indr_priv, indr_priv, mlx5e_rep_indr_block_unbind, - f, netdev, data, cleanup); + f, netdev, data, rpriv, + cleanup); if (IS_ERR(block_cb)) { list_del(&indr_priv->list); kfree(indr_priv); @@ -503,7 +504,7 @@ int mlx5e_rep_tc_netdevice_event_register(struct mlx5e_rep_priv *rpriv) void mlx5e_rep_tc_netdevice_event_unregister(struct mlx5e_rep_priv *rpriv) { flow_indr_dev_unregister(mlx5e_rep_indr_setup_cb, rpriv, - mlx5e_rep_indr_setup_tc_cb); + mlx5e_rep_indr_block_unbind); } #if IS_ENABLED(CONFIG_NET_TC_SKB_EXT) diff --git a/drivers/net/ethernet/netronome/nfp/flower/main.c b/drivers/net/ethernet/netronome/nfp/flower/main.c index c39327677a7d..bb448c82cdc2 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/main.c +++ b/drivers/net/ethernet/netronome/nfp/flower/main.c @@ -861,7 +861,7 @@ static void nfp_flower_clean(struct nfp_app *app) flush_work(&app_priv->cmsg_work); flow_indr_dev_unregister(nfp_flower_indr_setup_tc_cb, app, - nfp_flower_setup_indr_block_cb); + nfp_flower_setup_indr_tc_release); if (app_priv->flower_ext_feats & NFP_FL_FEATS_VF_RLIM) nfp_flower_qos_cleanup(app); diff --git a/drivers/net/ethernet/netronome/nfp/flower/main.h b/drivers/net/ethernet/netronome/nfp/flower/main.h index 56b3b68e273e..7f54a620acad 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/main.h +++ b/drivers/net/ethernet/netronome/nfp/flower/main.h @@ -462,8 +462,7 @@ int nfp_flower_indr_setup_tc_cb(struct net_device *netdev, void *cb_priv, enum tc_setup_type type, void *type_data, void *data, void (*cleanup)(struct flow_block_cb *block_cb)); -int nfp_flower_setup_indr_block_cb(enum tc_setup_type type, void *type_data, - void *cb_priv); +void nfp_flower_setup_indr_tc_release(void *cb_priv); void __nfp_flower_non_repr_priv_get(struct nfp_flower_non_repr_priv *non_repr_priv); diff --git a/drivers/net/ethernet/netronome/nfp/flower/offload.c b/drivers/net/ethernet/netronome/nfp/flower/offload.c index 95c75250c355..d7340dc09b4c 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/offload.c +++ b/drivers/net/ethernet/netronome/nfp/flower/offload.c @@ -1619,8 +1619,8 @@ nfp_flower_indr_block_cb_priv_lookup(struct nfp_app *app, return NULL; } -int nfp_flower_setup_indr_block_cb(enum tc_setup_type type, - void *type_data, void *cb_priv) +static int nfp_flower_setup_indr_block_cb(enum tc_setup_type type, + void *type_data, void *cb_priv) { struct nfp_flower_indr_block_cb_priv *priv = cb_priv; struct flow_cls_offload *flower = type_data; @@ -1637,7 +1637,7 @@ int nfp_flower_setup_indr_block_cb(enum tc_setup_type type, } } -static void nfp_flower_setup_indr_tc_release(void *cb_priv) +void nfp_flower_setup_indr_tc_release(void *cb_priv) { struct nfp_flower_indr_block_cb_priv *priv = cb_priv; @@ -1680,7 +1680,7 @@ nfp_flower_setup_indr_tc_block(struct net_device *netdev, struct nfp_app *app, block_cb = flow_indr_block_cb_alloc(nfp_flower_setup_indr_block_cb, cb_priv, cb_priv, nfp_flower_setup_indr_tc_release, - f, netdev, data, cleanup); + f, netdev, data, app, cleanup); if (IS_ERR(block_cb)) { list_del(&cb_priv->list); kfree(cb_priv); diff --git a/include/net/flow_offload.h b/include/net/flow_offload.h index 1961c7982273..6315324b9dc2 100644 --- a/include/net/flow_offload.h +++ b/include/net/flow_offload.h @@ -450,6 +450,7 @@ struct flow_block_indr { struct net_device *dev; enum flow_block_binder_type binder_type; void *data; + void *cb_priv; void (*cleanup)(struct flow_block_cb *block_cb); }; @@ -472,6 +473,7 @@ struct flow_block_cb *flow_indr_block_cb_alloc(flow_setup_cb_t *cb, void (*release)(void *cb_priv), struct flow_block_offload *bo, struct net_device *dev, void *data, + void *indr_cb_priv, void (*cleanup)(struct flow_block_cb *block_cb)); void flow_block_cb_free(struct flow_block_cb *block_cb); @@ -551,7 +553,7 @@ typedef int flow_indr_block_bind_cb_t(struct net_device *dev, void *cb_priv, int flow_indr_dev_register(flow_indr_block_bind_cb_t *cb, void *cb_priv); void flow_indr_dev_unregister(flow_indr_block_bind_cb_t *cb, void *cb_priv, - flow_setup_cb_t *setup_cb); + void (*release)(void *cb_priv)); int flow_indr_dev_setup_offload(struct net_device *dev, enum tc_setup_type type, void *data, struct flow_block_offload *bo, diff --git a/net/core/flow_offload.c b/net/core/flow_offload.c index ddd958c6040e..b739cfab796e 100644 --- a/net/core/flow_offload.c +++ b/net/core/flow_offload.c @@ -372,14 +372,15 @@ int flow_indr_dev_register(flow_indr_block_bind_cb_t *cb, void *cb_priv) } EXPORT_SYMBOL(flow_indr_dev_register); -static void __flow_block_indr_cleanup(flow_setup_cb_t *setup_cb, void *cb_priv, +static void __flow_block_indr_cleanup(void (*release)(void *cb_priv), + void *cb_priv, struct list_head *cleanup_list) { struct flow_block_cb *this, *next; list_for_each_entry_safe(this, next, &flow_block_indr_list, indr.list) { - if (this->cb == setup_cb && - this->cb_priv == cb_priv) { + if (this->release == release && + this->indr.cb_priv == cb_priv) { list_move(&this->indr.list, cleanup_list); return; } @@ -397,7 +398,7 @@ static void flow_block_indr_notify(struct list_head *cleanup_list) } void flow_indr_dev_unregister(flow_indr_block_bind_cb_t *cb, void *cb_priv, - flow_setup_cb_t *setup_cb) + void (*release)(void *cb_priv)) { struct flow_indr_dev *this, *next, *indr_dev = NULL; LIST_HEAD(cleanup_list); @@ -418,7 +419,7 @@ void flow_indr_dev_unregister(flow_indr_block_bind_cb_t *cb, void *cb_priv, return; } - __flow_block_indr_cleanup(setup_cb, cb_priv, &cleanup_list); + __flow_block_indr_cleanup(release, cb_priv, &cleanup_list); mutex_unlock(&flow_indr_block_lock); flow_block_indr_notify(&cleanup_list); @@ -429,10 +430,12 @@ EXPORT_SYMBOL(flow_indr_dev_unregister); static void flow_block_indr_init(struct flow_block_cb *flow_block, struct flow_block_offload *bo, struct net_device *dev, void *data, + void *cb_priv, void (*cleanup)(struct flow_block_cb *block_cb)) { flow_block->indr.binder_type = bo->binder_type; flow_block->indr.data = data; + flow_block->indr.cb_priv = cb_priv; flow_block->indr.dev = dev; flow_block->indr.cleanup = cleanup; } @@ -442,6 +445,7 @@ struct flow_block_cb *flow_indr_block_cb_alloc(flow_setup_cb_t *cb, void (*release)(void *cb_priv), struct flow_block_offload *bo, struct net_device *dev, void *data, + void *indr_cb_priv, void (*cleanup)(struct flow_block_cb *block_cb)) { struct flow_block_cb *block_cb; @@ -450,7 +454,7 @@ struct flow_block_cb *flow_indr_block_cb_alloc(flow_setup_cb_t *cb, if (IS_ERR(block_cb)) goto out; - flow_block_indr_init(block_cb, bo, dev, data, cleanup); + flow_block_indr_init(block_cb, bo, dev, data, indr_cb_priv, cleanup); list_add(&block_cb->indr.list, &flow_block_indr_list); out: diff --git a/net/netfilter/nf_flow_table_offload.c b/net/netfilter/nf_flow_table_offload.c index 62651e6683f6..5fff1e040168 100644 --- a/net/netfilter/nf_flow_table_offload.c +++ b/net/netfilter/nf_flow_table_offload.c @@ -950,6 +950,7 @@ static void nf_flow_table_indr_cleanup(struct flow_block_cb *block_cb) nf_flow_table_gc_cleanup(flowtable, dev); down_write(&flowtable->flow_block_lock); list_del(&block_cb->list); + list_del(&block_cb->driver_list); flow_block_cb_free(block_cb); up_write(&flowtable->flow_block_lock); } diff --git a/net/netfilter/nf_tables_offload.c b/net/netfilter/nf_tables_offload.c index 185fc82c99aa..c7cf1cde46de 100644 --- a/net/netfilter/nf_tables_offload.c +++ b/net/netfilter/nf_tables_offload.c @@ -296,6 +296,7 @@ static void nft_indr_block_cleanup(struct flow_block_cb *block_cb) nft_flow_block_offload_init(&bo, dev_net(dev), FLOW_BLOCK_UNBIND, basechain, &extack); mutex_lock(&net->nft.commit_mutex); + list_del(&block_cb->driver_list); list_move(&block_cb->list, &bo.cb_list); nft_flow_offload_unbind(&bo, basechain); mutex_unlock(&net->nft.commit_mutex); diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index a00a203b2ef5..f8028d73edf1 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -652,6 +652,7 @@ static void tc_block_indr_cleanup(struct flow_block_cb *block_cb) &block->flow_block, tcf_block_shared(block), &extack); down_write(&block->cb_lock); + list_del(&block_cb->driver_list); list_move(&block_cb->list, &bo.cb_list); up_write(&block->cb_lock); rtnl_lock(); From 3c005110d4083c52ff6c99018127adf92f3f23aa Mon Sep 17 00:00:00 2001 From: wenxu Date: Thu, 18 Jun 2020 20:49:11 +0800 Subject: [PATCH 259/618] net/sched: cls_api: fix nooffloaddevcnt warning dmesg log The block->nooffloaddevcnt should always count for indr block. even the indr block offload successful. The representor maybe gone away and the ingress qdisc can work in software mode. block->nooffloaddevcnt warning with following dmesg log: [ 760.667058] ##################################################### [ 760.668186] ## TEST test-ecmp-add-vxlan-encap-disable-sriov.sh ## [ 760.669179] ##################################################### [ 761.780655] :test: Fedora 30 (Thirty) [ 761.783794] :test: Linux reg-r-vrt-018-180 5.7.0+ [ 761.822890] :test: NIC ens1f0 FW 16.26.6000 PCI 0000:81:00.0 DEVICE 0x1019 ConnectX-5 Ex [ 761.860244] mlx5_core 0000:81:00.0 ens1f0: Link up [ 761.880693] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f0: link becomes ready [ 762.059732] mlx5_core 0000:81:00.1 ens1f1: Link up [ 762.234341] :test: unbind vfs of ens1f0 [ 762.257825] :test: Change ens1f0 eswitch (0000:81:00.0) mode to switchdev [ 762.291363] :test: unbind vfs of ens1f1 [ 762.306914] :test: Change ens1f1 eswitch (0000:81:00.1) mode to switchdev [ 762.309237] mlx5_core 0000:81:00.1: E-Switch: Disable: mode(LEGACY), nvfs(2), active vports(3) [ 763.282598] mlx5_core 0000:81:00.1: E-Switch: Supported tc offload range - chains: 4294967294, prios: 4294967295 [ 763.362825] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0) [ 763.444465] mlx5_core 0000:81:00.1 ens1f1: renamed from eth0 [ 763.460088] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0) [ 763.502586] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0) [ 763.552429] ens1f1_0: renamed from eth0 [ 763.569569] mlx5_core 0000:81:00.1: E-Switch: Enable: mode(OFFLOADS), nvfs(2), active vports(3) [ 763.629694] ens1f1_1: renamed from eth1 [ 764.631552] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1_0: link becomes ready [ 764.670841] :test: unbind vfs of ens1f0 [ 764.681966] :test: unbind vfs of ens1f1 [ 764.726762] mlx5_core 0000:81:00.0 ens1f0: Link up [ 764.766511] mlx5_core 0000:81:00.1 ens1f1: Link up [ 764.797325] :test: Add multipath vxlan encap rule and disable sriov [ 764.798544] :test: config multipath route [ 764.812732] mlx5_core 0000:81:00.0: lag map port 1:2 port 2:2 [ 764.874556] mlx5_core 0000:81:00.0: modify lag map port 1:1 port 2:2 [ 765.603681] :test: OK [ 765.659048] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1_1: link becomes ready [ 765.675085] :test: verify rule in hw [ 765.694237] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f0: link becomes ready [ 765.711892] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1: link becomes ready [ 766.979230] :test: OK [ 768.125419] :test: OK [ 768.127519] :test: - disable sriov ens1f1 [ 768.131160] pci 0000:81:02.2: Removing from iommu group 75 [ 768.132646] pci 0000:81:02.3: Removing from iommu group 76 [ 769.179749] mlx5_core 0000:81:00.1: E-Switch: Disable: mode(OFFLOADS), nvfs(2), active vports(3) [ 769.455627] mlx5_core 0000:81:00.0: modify lag map port 1:1 port 2:1 [ 769.703990] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0) [ 769.988637] mlx5_core 0000:81:00.1 ens1f1: renamed from eth0 [ 769.990022] :test: - disable sriov ens1f0 [ 769.994922] pci 0000:81:00.2: Removing from iommu group 73 [ 769.997048] pci 0000:81:00.3: Removing from iommu group 74 [ 771.035813] mlx5_core 0000:81:00.0: E-Switch: Disable: mode(OFFLOADS), nvfs(2), active vports(3) [ 771.339091] ------------[ cut here ]------------ [ 771.340812] WARNING: CPU: 6 PID: 3448 at net/sched/cls_api.c:749 tcf_block_offload_unbind.isra.0+0x5c/0x60 [ 771.341728] Modules linked in: act_mirred act_tunnel_key cls_flower dummy vxlan ip6_udp_tunnel udp_tunnel sch_ingress nfsv3 nfs_acl nfs lockd grace fscache tun bridge stp llc sunrpc rdma_ucm rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp mlxfw act_ct nf_flow_table kvm_intel nf_nat kvm nf_conntrack irqbypass crct10dif_pclmul igb crc32_pclmul nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 crc32c_intel ghash_clmulni_intel ptp ipmi_ssif intel_cstate pps_c ore ses intel_uncore mei_me iTCO_wdt joydev ipmi_si iTCO_vendor_support i2c_i801 enclosure mei ioatdma dca lpc_ich wmi ipmi_devintf pcspkr acpi_power_meter ipmi_msghandler acpi_pad ast i2c_algo_bit drm_vram_helper drm_kms_helper drm_ttm_helper ttm drm mpt3sas raid_class scsi_transport_sas [ 771.347818] CPU: 6 PID: 3448 Comm: test-ecmp-add-v Not tainted 5.7.0+ #1146 [ 771.348727] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 771.349646] RIP: 0010:tcf_block_offload_unbind.isra.0+0x5c/0x60 [ 771.350553] Code: 4a fd ff ff 83 f8 a1 74 0e 5b 4c 89 e7 5d 41 5c 41 5d e9 07 93 89 ff 8b 83 a0 00 00 00 8d 50 ff 89 93 a0 00 00 00 85 c0 75 df <0f> 0b eb db 0f 1f 44 00 00 41 57 41 56 41 55 41 89 cd 41 54 49 89 [ 771.352420] RSP: 0018:ffffb33144cd3b00 EFLAGS: 00010246 [ 771.353353] RAX: 0000000000000000 RBX: ffff8b37cf4b2800 RCX: 0000000000000000 [ 771.354294] RDX: 00000000ffffffff RSI: ffff8b3b9aad0000 RDI: ffffffff8d5c6e20 [ 771.355245] RBP: ffff8b37eb546948 R08: ffffffffc0b7a348 R09: ffff8b3b9aad0000 [ 771.356189] R10: 0000000000000001 R11: ffff8b3ba7a0a1c0 R12: ffff8b37cf4b2850 [ 771.357123] R13: ffff8b3b9aad0000 R14: ffff8b37cf4b2820 R15: ffff8b37cf4b2820 [ 771.358039] FS: 00007f8a19b6e740(0000) GS:ffff8b3befa00000(0000) knlGS:0000000000000000 [ 771.358965] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 771.359885] CR2: 00007f3afb91c1a0 CR3: 000000045133c004 CR4: 00000000001606e0 [ 771.360825] Call Trace: [ 771.361764] __tcf_block_put+0x84/0x150 [ 771.362712] ingress_destroy+0x1b/0x20 [sch_ingress] [ 771.363658] qdisc_destroy+0x3e/0xc0 [ 771.364594] dev_shutdown+0x7a/0xa5 [ 771.365522] rollback_registered_many+0x20d/0x530 [ 771.366458] ? netdev_upper_dev_unlink+0x15d/0x1c0 [ 771.367387] unregister_netdevice_many.part.0+0xf/0x70 [ 771.368310] vxlan_netdevice_event+0xa4/0x110 [vxlan] [ 771.369454] notifier_call_chain+0x4c/0x70 [ 771.370579] rollback_registered_many+0x2f5/0x530 [ 771.371719] rollback_registered+0x56/0x90 [ 771.372843] unregister_netdevice_queue+0x73/0xb0 [ 771.373982] unregister_netdev+0x18/0x20 [ 771.375168] mlx5e_vport_rep_unload+0x56/0xc0 [mlx5_core] [ 771.376327] esw_offloads_disable+0x81/0x90 [mlx5_core] [ 771.377512] mlx5_eswitch_disable_locked.cold+0xcb/0x1af [mlx5_core] [ 771.378679] mlx5_eswitch_disable+0x44/0x60 [mlx5_core] [ 771.379822] mlx5_device_disable_sriov+0xad/0xb0 [mlx5_core] [ 771.380968] mlx5_core_sriov_configure+0xc1/0xe0 [mlx5_core] [ 771.382087] sriov_numvfs_store+0xfc/0x130 [ 771.383195] kernfs_fop_write+0xce/0x1b0 [ 771.384302] vfs_write+0xb6/0x1a0 [ 771.385410] ksys_write+0x5f/0xe0 [ 771.386500] do_syscall_64+0x5b/0x1d0 [ 771.387569] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 0fdcf78d5973 ("net: use flow_indr_dev_setup_offload()") Signed-off-by: wenxu Signed-off-by: David S. Miller --- net/sched/cls_api.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-) diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index f8028d73edf1..faa78b7dd962 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -672,25 +672,29 @@ static int tcf_block_offload_cmd(struct tcf_block *block, struct netlink_ext_ack *extack) { struct flow_block_offload bo = {}; - int err; tcf_block_offload_init(&bo, dev, command, ei->binder_type, &block->flow_block, tcf_block_shared(block), extack); - if (dev->netdev_ops->ndo_setup_tc) - err = dev->netdev_ops->ndo_setup_tc(dev, TC_SETUP_BLOCK, &bo); - else - err = flow_indr_dev_setup_offload(dev, TC_SETUP_BLOCK, block, - &bo, tc_block_indr_cleanup); + if (dev->netdev_ops->ndo_setup_tc) { + int err; - if (err < 0) { - if (err != -EOPNOTSUPP) - NL_SET_ERR_MSG(extack, "Driver ndo_setup_tc failed"); - return err; + err = dev->netdev_ops->ndo_setup_tc(dev, TC_SETUP_BLOCK, &bo); + if (err < 0) { + if (err != -EOPNOTSUPP) + NL_SET_ERR_MSG(extack, "Driver ndo_setup_tc failed"); + return err; + } + + return tcf_block_setup(block, &bo); } - return tcf_block_setup(block, &bo); + flow_indr_dev_setup_offload(dev, TC_SETUP_BLOCK, block, &bo, + tc_block_indr_cleanup); + tcf_block_setup(block, &bo); + + return -EOPNOTSUPP; } static int tcf_block_offload_bind(struct tcf_block *block, struct Qdisc *q, From 5948378b26d89f8aa5eac37629dbd0616ce8d7a7 Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Thu, 18 Jun 2020 10:43:46 -0500 Subject: [PATCH 260/618] ibmveth: Fix max MTU limit The max MTU limit defined for ibmveth is not accounting for virtual ethernet buffer overhead, which is twenty-two additional bytes set aside for the ethernet header and eight additional bytes of an opaque handle reserved for use by the hypervisor. Update the max MTU to reflect this overhead. Fixes: d894be57ca92 ("ethernet: use net core MTU range checking in more drivers") Fixes: 110447f8269a ("ethernet: fix min/max MTU typos") Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmveth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c index 96d36ae5049e..c5c732601e35 100644 --- a/drivers/net/ethernet/ibm/ibmveth.c +++ b/drivers/net/ethernet/ibm/ibmveth.c @@ -1715,7 +1715,7 @@ static int ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id) } netdev->min_mtu = IBMVETH_MIN_MTU; - netdev->max_mtu = ETH_MAX_MTU; + netdev->max_mtu = ETH_MAX_MTU - IBMVETH_BUFF_OH; memcpy(netdev->dev_addr, mac_addr_p, ETH_ALEN); From ca8826095e4d4afc0ccaead27bba6e4b623a12ae Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Thu, 18 Jun 2020 12:40:43 -0400 Subject: [PATCH 261/618] selftests/net: report etf errors correctly The ETF qdisc can queue skbs that it could not pace on the errqueue. Address a few issues in the selftest - recv buffer size was too small, and incorrectly calculated - compared errno to ee_code instead of ee_errno - missed invalid request error type v2: - fix a few checkpatch --strict indentation warnings Fixes: ea6a547669b3 ("selftests/net: make so_txtime more robust to timer variance") Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller --- tools/testing/selftests/net/so_txtime.c | 33 +++++++++++++++++++------ 1 file changed, 26 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/net/so_txtime.c b/tools/testing/selftests/net/so_txtime.c index 383bac05ac32..ceaad78e9667 100644 --- a/tools/testing/selftests/net/so_txtime.c +++ b/tools/testing/selftests/net/so_txtime.c @@ -15,8 +15,9 @@ #include #include #include +#include #include -#include +#include #include #include #include @@ -140,8 +141,8 @@ static void do_recv_errqueue_timeout(int fdt) { char control[CMSG_SPACE(sizeof(struct sock_extended_err)) + CMSG_SPACE(sizeof(struct sockaddr_in6))] = {0}; - char data[sizeof(struct ipv6hdr) + - sizeof(struct tcphdr) + 1]; + char data[sizeof(struct ethhdr) + sizeof(struct ipv6hdr) + + sizeof(struct udphdr) + 1]; struct sock_extended_err *err; struct msghdr msg = {0}; struct iovec iov = {0}; @@ -159,6 +160,8 @@ static void do_recv_errqueue_timeout(int fdt) msg.msg_controllen = sizeof(control); while (1) { + const char *reason; + ret = recvmsg(fdt, &msg, MSG_ERRQUEUE); if (ret == -1 && errno == EAGAIN) break; @@ -176,14 +179,30 @@ static void do_recv_errqueue_timeout(int fdt) err = (struct sock_extended_err *)CMSG_DATA(cm); if (err->ee_origin != SO_EE_ORIGIN_TXTIME) error(1, 0, "errqueue: origin 0x%x\n", err->ee_origin); - if (err->ee_code != ECANCELED) - error(1, 0, "errqueue: code 0x%x\n", err->ee_code); + + switch (err->ee_errno) { + case ECANCELED: + if (err->ee_code != SO_EE_CODE_TXTIME_MISSED) + error(1, 0, "errqueue: unknown ECANCELED %u\n", + err->ee_code); + reason = "missed txtime"; + break; + case EINVAL: + if (err->ee_code != SO_EE_CODE_TXTIME_INVALID_PARAM) + error(1, 0, "errqueue: unknown EINVAL %u\n", + err->ee_code); + reason = "invalid txtime"; + break; + default: + error(1, 0, "errqueue: errno %u code %u\n", + err->ee_errno, err->ee_code); + }; tstamp = ((int64_t) err->ee_data) << 32 | err->ee_info; tstamp -= (int64_t) glob_tstart; tstamp /= 1000 * 1000; - fprintf(stderr, "send: pkt %c at %" PRId64 "ms dropped\n", - data[ret - 1], tstamp); + fprintf(stderr, "send: pkt %c at %" PRId64 "ms dropped: %s\n", + data[ret - 1], tstamp, reason); msg.msg_flags = 0; msg.msg_controllen = sizeof(control); From b59eabd23ee53e8c3492602722e1697f9a2f63ad Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Thu, 18 Jun 2020 10:29:04 -0700 Subject: [PATCH 262/618] ionic: tame the watchdog timer on reconfig Even with moving netif_tx_disable() to an earlier point when taking down the queues for a reconfiguration, we still end up with the occasional netdev watchdog Tx Timeout complaint. The old method of using netif_trans_update() works fine for queue 0, but has no effect on the remaining queues. Using netif_device_detach() allows us to signal to the watchdog to ignore us for the moment. Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support") Signed-off-by: Shannon Nelson Acked-by: Jonathan Toppins Signed-off-by: David S. Miller --- drivers/net/ethernet/pensando/ionic/ionic_lif.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c index 8f29ef133743..aaa00edd9d5b 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c @@ -1694,15 +1694,15 @@ static void ionic_stop_queues(struct ionic_lif *lif) if (!test_and_clear_bit(IONIC_LIF_F_UP, lif->state)) return; - ionic_txrx_disable(lif); netif_tx_disable(lif->netdev); + ionic_txrx_disable(lif); } int ionic_stop(struct net_device *netdev) { struct ionic_lif *lif = netdev_priv(netdev); - if (!netif_device_present(netdev)) + if (test_bit(IONIC_LIF_F_FW_RESET, lif->state)) return 0; ionic_stop_queues(lif); @@ -1985,18 +1985,19 @@ int ionic_reset_queues(struct ionic_lif *lif) bool running; int err = 0; - /* Put off the next watchdog timeout */ - netif_trans_update(lif->netdev); - err = ionic_wait_for_bit(lif, IONIC_LIF_F_QUEUE_RESET); if (err) return err; running = netif_running(lif->netdev); - if (running) + if (running) { + netif_device_detach(lif->netdev); err = ionic_stop(lif->netdev); - if (!err && running) + } + if (!err && running) { ionic_open(lif->netdev); + netif_device_attach(lif->netdev); + } clear_bit(IONIC_LIF_F_QUEUE_RESET, lif->state); From 8b40eb73509f5704a0e8cd25de0163876299f1a7 Mon Sep 17 00:00:00 2001 From: Dany Madden Date: Thu, 18 Jun 2020 15:24:13 -0400 Subject: [PATCH 263/618] ibmvnic: continue to init in CRQ reset returns H_CLOSED Continue the reset path when partner adapter is not ready or H_CLOSED is returned from reset crq. This patch allows the CRQ init to proceed to establish a valid CRQ for traffic to flow after reset. Signed-off-by: Dany Madden Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 2baf7b3ff4cb..0fd7eae25fe9 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1971,13 +1971,18 @@ static int do_reset(struct ibmvnic_adapter *adapter, release_sub_crqs(adapter, 1); } else { rc = ibmvnic_reset_crq(adapter); - if (!rc) + if (rc == H_CLOSED || rc == H_SUCCESS) { rc = vio_enable_interrupts(adapter->vdev); + if (rc) + netdev_err(adapter->netdev, + "Reset failed to enable interrupts. rc=%d\n", + rc); + } } if (rc) { netdev_err(adapter->netdev, - "Couldn't initialize crq. rc=%d\n", rc); + "Reset couldn't initialize crq. rc=%d\n", rc); goto out; } From 89fbd26cca7ec9e82ec4787a4b6e95939b57d073 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Thu, 18 Jun 2020 23:25:50 +0200 Subject: [PATCH 264/618] r8169: fix firmware not resetting tp->ocp_base Typically the firmware takes care that tp->ocp_base is reset to its default value. That's not the case (at least) for RTL8117. As a result subsequent PHY access reads/writes the wrong page and the link is broken. Fix this be resetting tp->ocp_base explicitly. Fixes: 229c1e0dfd3d ("r8169: load firmware for RTL8168fp/RTL8117") Reported-by: Aaron Ma Tested-by: Aaron Ma Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index dad84ecf5a77..b660ddbe4025 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -2114,8 +2114,11 @@ static void rtl_release_firmware(struct rtl8169_private *tp) void r8169_apply_firmware(struct rtl8169_private *tp) { /* TODO: release firmware if rtl_fw_write_firmware signals failure. */ - if (tp->rtl_fw) + if (tp->rtl_fw) { rtl_fw_write_firmware(tp, tp->rtl_fw); + /* At least one firmware doesn't reset tp->ocp_base. */ + tp->ocp_base = OCP_STD_PHY_BASE; + } } static void rtl8168_config_eee_mac(struct rtl8169_private *tp) From 54eeea0d707d4e6efb02f5a7896d6788472a2da4 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Fri, 19 Jun 2020 11:24:45 +0800 Subject: [PATCH 265/618] tc-testing: update geneve options match in tunnel_key unit tests Since iproute2 commit f72c3ad00f3b ("tc: m_tunnel_key: add options support for vxlan"), the geneve opt output use key word "geneve_opts" instead of "geneve_opt". To make compatibility for both old and new iproute2, let's accept both "geneve_opt" and "geneve_opts". Suggested-by: Davide Caratti Signed-off-by: Hangbin Liu Reviewed-by: Simon Horman Tested-by: Davide Caratti Signed-off-by: David S. Miller --- .../tc-testing/tc-tests/actions/tunnel_key.json | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json b/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json index fbeb9197697d..7357c58fa2dc 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json @@ -629,7 +629,7 @@ "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 dst_port 6081 geneve_opts 0102:80:00880022 index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action tunnel_key index 1", - "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt 0102:80:00880022.*index 1", + "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt[s]? 0102:80:00880022.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action tunnel_key" @@ -653,7 +653,7 @@ "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 dst_port 6081 geneve_opts 0102:80:00880022,0408:42:0040007611223344,0111:02:1020304011223344 index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action tunnel_key index 1", - "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt 0102:80:00880022,0408:42:0040007611223344,0111:02:1020304011223344.*index 1", + "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt[s]? 0102:80:00880022,0408:42:0040007611223344,0111:02:1020304011223344.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action tunnel_key" @@ -677,7 +677,7 @@ "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 dst_port 6081 geneve_opts 824212:80:00880022 index 1", "expExitCode": "255", "verifyCmd": "$TC actions get action tunnel_key index 1", - "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt 824212:80:00880022.*index 1", + "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt[s]? 824212:80:00880022.*index 1", "matchCount": "0", "teardown": [ "$TC actions flush action tunnel_key" @@ -701,7 +701,7 @@ "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 dst_port 6081 geneve_opts 0102:4224:00880022 index 1", "expExitCode": "255", "verifyCmd": "$TC actions get action tunnel_key index 1", - "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt 0102:4224:00880022.*index 1", + "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt[s]? 0102:4224:00880022.*index 1", "matchCount": "0", "teardown": [ "$TC actions flush action tunnel_key" @@ -725,7 +725,7 @@ "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 dst_port 6081 geneve_opts 0102:80:4288 index 1", "expExitCode": "255", "verifyCmd": "$TC actions get action tunnel_key index 1", - "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt 0102:80:4288.*index 1", + "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt[s]? 0102:80:4288.*index 1", "matchCount": "0", "teardown": [ "$TC actions flush action tunnel_key" @@ -749,7 +749,7 @@ "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 dst_port 6081 geneve_opts 0102:80:4288428822 index 1", "expExitCode": "255", "verifyCmd": "$TC actions get action tunnel_key index 1", - "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt 0102:80:4288428822.*index 1", + "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt[s]? 0102:80:4288428822.*index 1", "matchCount": "0", "teardown": [ "$TC actions flush action tunnel_key" @@ -773,7 +773,7 @@ "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 dst_port 6081 geneve_opts 0102:80:00880022,0408:42: index 1", "expExitCode": "255", "verifyCmd": "$TC actions get action tunnel_key index 1", - "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt 0102:80:00880022,0408:42:.*index 1", + "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt[s]? 0102:80:00880022,0408:42:.*index 1", "matchCount": "0", "teardown": [ "$TC actions flush action tunnel_key" From 5f9af404eec82981c4345c9943be48422234e7ab Mon Sep 17 00:00:00 2001 From: Daniel Gomez Date: Mon, 18 May 2020 22:16:46 +0200 Subject: [PATCH 266/618] drm: rcar-du: Fix build error Select DRM_KMS_HELPER dependency. Build error when DRM_KMS_HELPER is not selected: drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xd48): undefined reference to `drm_atomic_helper_bridge_duplicate_state' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xd50): undefined reference to `drm_atomic_helper_bridge_destroy_state' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xd70): undefined reference to `drm_atomic_helper_bridge_reset' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xdc8): undefined reference to `drm_atomic_helper_connector_reset' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xde0): undefined reference to `drm_helper_probe_single_connector_modes' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xe08): undefined reference to `drm_atomic_helper_connector_duplicate_state' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xe10): undefined reference to `drm_atomic_helper_connector_destroy_state' Fixes: c6a27fa41fab ("drm: rcar-du: Convert LVDS encoder code to bridge driver") Cc: Signed-off-by: Daniel Gomez Reviewed-by: Emil Velikov Reviewed-by: Kieran Bingham Reviewed-by: Laurent Pinchart Signed-off-by: Laurent Pinchart --- drivers/gpu/drm/rcar-du/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig index 0919f1f159a4..f65d1489dc50 100644 --- a/drivers/gpu/drm/rcar-du/Kconfig +++ b/drivers/gpu/drm/rcar-du/Kconfig @@ -31,6 +31,7 @@ config DRM_RCAR_DW_HDMI config DRM_RCAR_LVDS tristate "R-Car DU LVDS Encoder Support" depends on DRM && DRM_BRIDGE && OF + select DRM_KMS_HELPER select DRM_PANEL select OF_FLATTREE select OF_OVERLAY From 0041cd5a50442db6e456b145892a0eaf2dff061f Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 19 Jun 2020 23:38:16 +0100 Subject: [PATCH 267/618] rxrpc: Fix notification call on completion of discarded calls When preallocated service calls are being discarded, they're passed to ->discard_new_call() to have the caller clean up any attached higher-layer preallocated pieces before being marked completed. However, the act of marking them completed now invokes the call's notification function - which causes a problem because that function might assume that the previously freed pieces of memory are still there. Fix this by setting a dummy notification function on the socket after calling ->discard_new_call(). This results in the following kasan message when the kafs module is removed. ================================================================== BUG: KASAN: use-after-free in afs_wake_up_async_call+0x6aa/0x770 fs/afs/rxrpc.c:707 Write of size 1 at addr ffff8880946c39e4 by task kworker/u4:1/21 CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.8.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x18f/0x20d lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 afs_wake_up_async_call+0x6aa/0x770 fs/afs/rxrpc.c:707 rxrpc_notify_socket+0x1db/0x5d0 net/rxrpc/recvmsg.c:40 __rxrpc_set_call_completion.part.0+0x172/0x410 net/rxrpc/recvmsg.c:76 __rxrpc_call_completed net/rxrpc/recvmsg.c:112 [inline] rxrpc_call_completed+0xca/0xf0 net/rxrpc/recvmsg.c:111 rxrpc_discard_prealloc+0x781/0xab0 net/rxrpc/call_accept.c:233 rxrpc_listen+0x147/0x360 net/rxrpc/af_rxrpc.c:245 afs_close_socket+0x95/0x320 fs/afs/rxrpc.c:110 afs_net_exit+0x1bc/0x310 fs/afs/main.c:155 ops_exit_list.isra.0+0xa8/0x150 net/core/net_namespace.c:186 cleanup_net+0x511/0xa50 net/core/net_namespace.c:603 process_one_work+0x965/0x1690 kernel/workqueue.c:2269 worker_thread+0x96/0xe10 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:291 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 Allocated by task 6820: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:467 kmem_cache_alloc_trace+0x153/0x7d0 mm/slab.c:3551 kmalloc include/linux/slab.h:555 [inline] kzalloc include/linux/slab.h:669 [inline] afs_alloc_call+0x55/0x630 fs/afs/rxrpc.c:141 afs_charge_preallocation+0xe9/0x2d0 fs/afs/rxrpc.c:757 afs_open_socket+0x292/0x360 fs/afs/rxrpc.c:92 afs_net_init+0xa6c/0xe30 fs/afs/main.c:125 ops_init+0xaf/0x420 net/core/net_namespace.c:151 setup_net+0x2de/0x860 net/core/net_namespace.c:341 copy_net_ns+0x293/0x590 net/core/net_namespace.c:482 create_new_namespaces+0x3fb/0xb30 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xbd/0x1f0 kernel/nsproxy.c:231 ksys_unshare+0x43d/0x8e0 kernel/fork.c:2983 __do_sys_unshare kernel/fork.c:3051 [inline] __se_sys_unshare kernel/fork.c:3049 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3049 do_syscall_64+0x60/0xe0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 21: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0xf7/0x140 mm/kasan/common.c:455 __cache_free mm/slab.c:3426 [inline] kfree+0x109/0x2b0 mm/slab.c:3757 afs_put_call+0x585/0xa40 fs/afs/rxrpc.c:190 rxrpc_discard_prealloc+0x764/0xab0 net/rxrpc/call_accept.c:230 rxrpc_listen+0x147/0x360 net/rxrpc/af_rxrpc.c:245 afs_close_socket+0x95/0x320 fs/afs/rxrpc.c:110 afs_net_exit+0x1bc/0x310 fs/afs/main.c:155 ops_exit_list.isra.0+0xa8/0x150 net/core/net_namespace.c:186 cleanup_net+0x511/0xa50 net/core/net_namespace.c:603 process_one_work+0x965/0x1690 kernel/workqueue.c:2269 worker_thread+0x96/0xe10 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:291 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 The buggy address belongs to the object at ffff8880946c3800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 484 bytes inside of 1024-byte region [ffff8880946c3800, ffff8880946c3c00) The buggy address belongs to the page: page:ffffea000251b0c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0002546508 ffffea00024fa248 ffff8880aa000c40 raw: 0000000000000000 ffff8880946c3000 0000000100000002 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880946c3880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880946c3900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880946c3980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880946c3a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880946c3a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Reported-by: syzbot+d3eccef36ddbd02713e9@syzkaller.appspotmail.com Fixes: 5ac0d62226a0 ("rxrpc: Fix missing notification") Signed-off-by: David Howells Signed-off-by: David S. Miller --- net/rxrpc/call_accept.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/rxrpc/call_accept.c b/net/rxrpc/call_accept.c index b7611cc159e5..032ed76c0166 100644 --- a/net/rxrpc/call_accept.c +++ b/net/rxrpc/call_accept.c @@ -22,6 +22,11 @@ #include #include "ar-internal.h" +static void rxrpc_dummy_notify(struct sock *sk, struct rxrpc_call *call, + unsigned long user_call_ID) +{ +} + /* * Preallocate a single service call, connection and peer and, if possible, * give them a user ID and attach the user's side of the ID to them. @@ -228,6 +233,8 @@ void rxrpc_discard_prealloc(struct rxrpc_sock *rx) if (rx->discard_new_call) { _debug("discard %lx", call->user_call_ID); rx->discard_new_call(call, call->user_call_ID); + if (call->notify_rx) + call->notify_rx = rxrpc_dummy_notify; rxrpc_put_call(call, rxrpc_call_put_kernel); } rxrpc_call_completed(call); From 67c20de35a3cc2e2cd940f95ebd85ed0a765315a Mon Sep 17 00:00:00 2001 From: Rob Gill Date: Sat, 20 Jun 2020 02:08:25 +0000 Subject: [PATCH 268/618] net: Add MODULE_DESCRIPTION entries to network modules The user tool modinfo is used to get information on kernel modules, including a description where it is available. This patch adds a brief MODULE_DESCRIPTION to the following modules: 9p drop_monitor esp4_offload esp6_offload fou fou6 ila sch_fq sch_fq_codel sch_hhf Signed-off-by: Rob Gill Signed-off-by: David S. Miller --- net/9p/mod.c | 1 + net/core/drop_monitor.c | 1 + net/ipv4/esp4_offload.c | 1 + net/ipv4/fou.c | 1 + net/ipv6/esp6_offload.c | 1 + net/ipv6/fou6.c | 1 + net/ipv6/ila/ila_main.c | 1 + net/sched/sch_fq.c | 1 + net/sched/sch_fq_codel.c | 1 + net/sched/sch_hhf.c | 1 + 10 files changed, 10 insertions(+) diff --git a/net/9p/mod.c b/net/9p/mod.c index c1b62428da7b..5126566850bd 100644 --- a/net/9p/mod.c +++ b/net/9p/mod.c @@ -189,3 +189,4 @@ MODULE_AUTHOR("Latchesar Ionkov "); MODULE_AUTHOR("Eric Van Hensbergen "); MODULE_AUTHOR("Ron Minnich "); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Plan 9 Resource Sharing Support (9P2000)"); diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c index 2ee7bc4c9e03..b09bebeadf0b 100644 --- a/net/core/drop_monitor.c +++ b/net/core/drop_monitor.c @@ -1721,3 +1721,4 @@ module_exit(exit_net_drop_monitor); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Neil Horman "); MODULE_ALIAS_GENL_FAMILY("NET_DM"); +MODULE_DESCRIPTION("Monitoring code for network dropped packet alerts"); diff --git a/net/ipv4/esp4_offload.c b/net/ipv4/esp4_offload.c index d14133eac476..5bda5aeda579 100644 --- a/net/ipv4/esp4_offload.c +++ b/net/ipv4/esp4_offload.c @@ -361,3 +361,4 @@ module_exit(esp4_offload_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Steffen Klassert "); MODULE_ALIAS_XFRM_OFFLOAD_TYPE(AF_INET, XFRM_PROTO_ESP); +MODULE_DESCRIPTION("IPV4 GSO/GRO offload support"); diff --git a/net/ipv4/fou.c b/net/ipv4/fou.c index dcc79ff54b41..abd083415f89 100644 --- a/net/ipv4/fou.c +++ b/net/ipv4/fou.c @@ -1304,3 +1304,4 @@ module_init(fou_init); module_exit(fou_fini); MODULE_AUTHOR("Tom Herbert "); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Foo over UDP"); diff --git a/net/ipv6/esp6_offload.c b/net/ipv6/esp6_offload.c index 55addea1948f..1ca516fb30e1 100644 --- a/net/ipv6/esp6_offload.c +++ b/net/ipv6/esp6_offload.c @@ -395,3 +395,4 @@ module_exit(esp6_offload_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Steffen Klassert "); MODULE_ALIAS_XFRM_OFFLOAD_TYPE(AF_INET6, XFRM_PROTO_ESP); +MODULE_DESCRIPTION("IPV6 GSO/GRO offload support"); diff --git a/net/ipv6/fou6.c b/net/ipv6/fou6.c index 091f94184dc1..430518ae26fa 100644 --- a/net/ipv6/fou6.c +++ b/net/ipv6/fou6.c @@ -224,3 +224,4 @@ module_init(fou6_init); module_exit(fou6_fini); MODULE_AUTHOR("Tom Herbert "); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Foo over UDP (IPv6)"); diff --git a/net/ipv6/ila/ila_main.c b/net/ipv6/ila/ila_main.c index 257d2b681246..36c58aa257e8 100644 --- a/net/ipv6/ila/ila_main.c +++ b/net/ipv6/ila/ila_main.c @@ -120,3 +120,4 @@ module_init(ila_init); module_exit(ila_fini); MODULE_AUTHOR("Tom Herbert "); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("IPv6: Identifier Locator Addressing (ILA)"); diff --git a/net/sched/sch_fq.c b/net/sched/sch_fq.c index 8f06a808c59a..2fb76fc0cc31 100644 --- a/net/sched/sch_fq.c +++ b/net/sched/sch_fq.c @@ -1075,3 +1075,4 @@ module_init(fq_module_init) module_exit(fq_module_exit) MODULE_AUTHOR("Eric Dumazet"); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Fair Queue Packet Scheduler"); diff --git a/net/sched/sch_fq_codel.c b/net/sched/sch_fq_codel.c index 436160be9c18..459a784056c0 100644 --- a/net/sched/sch_fq_codel.c +++ b/net/sched/sch_fq_codel.c @@ -721,3 +721,4 @@ module_init(fq_codel_module_init) module_exit(fq_codel_module_exit) MODULE_AUTHOR("Eric Dumazet"); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Fair Queue CoDel discipline"); diff --git a/net/sched/sch_hhf.c b/net/sched/sch_hhf.c index be35f03b657b..420ede875322 100644 --- a/net/sched/sch_hhf.c +++ b/net/sched/sch_hhf.c @@ -721,3 +721,4 @@ module_exit(hhf_module_exit) MODULE_AUTHOR("Terry Lam"); MODULE_AUTHOR("Nandita Dukkipati"); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Heavy-Hitter Filter (HHF)"); From efb94790852ae673b18efde1b171d284689ff333 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Mon, 15 Jun 2020 08:19:34 -0500 Subject: [PATCH 269/618] drm/panel-simple: fix connector type for LogicPD Type28 Display The LogicPD Type28 display used by several Logic PD products has not worked since v5.6. The connector type for the LogicPD Type 28 display is missing and drm_panel_bridge_add() requires connector type to be set. Signed-off-by: Adam Ford Fixes: 0d35408afbeb ("drm/panel: simple: Add Logic PD Type 28 display support") Cc: Adam Ford Cc: Sam Ravnborg Cc: Thierry Reding Cc: dri-devel@lists.freedesktop.org Cc: # v5.6+ Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200615131934.12440-1-aford173@gmail.com --- drivers/gpu/drm/panel/panel-simple.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index b6ecd1552132..334e9de5b2c8 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2495,6 +2495,7 @@ static const struct panel_desc logicpd_type_28 = { .bus_format = MEDIA_BUS_FMT_RGB888_1X24, .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE | DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE, + .connector_type = DRM_MODE_CONNECTOR_DPI, }; static const struct panel_desc mitsubishi_aa070mc01 = { From 8a4f5e1185db61bce6ce3a5dce6381a77bcf94e6 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 9 Jun 2020 13:28:09 +0300 Subject: [PATCH 270/618] drm/panel-simple: fix connector type for newhaven_nhd_43_480272ef_atxl Add connector type for newhaven_nhd_43_480272ef_atxl, as drm_panel_bridge_add() requires connector type to be set. Signed-off-by: Tomi Valkeinen Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200609102809.753203-1-tomi.valkeinen@ti.com --- drivers/gpu/drm/panel/panel-simple.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 334e9de5b2c8..5178f87d6574 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2664,6 +2664,7 @@ static const struct panel_desc newhaven_nhd_43_480272ef_atxl = { .bus_format = MEDIA_BUS_FMT_RGB888_1X24, .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE, + .connector_type = DRM_MODE_CONNECTOR_DPI, }; static const struct display_timing nlt_nl192108ac18_02d_timing = { From 7f757cb6b2fc0ad704d0ca0b7b5a2729aca35580 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 9 Jun 2020 11:29:43 +0200 Subject: [PATCH 271/618] video: fbdev: uvesafb: fix "noblank" option handling Fix the recent regression. Fixes: dbc7ece12a38 ("video: uvesafb: use true,false for bool variables") Cc: Jason Yan Reviewed-by: Sam Ravnborg Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/81c9f140-d6fb-803a-18c8-04dae1007ab3@samsung.com --- drivers/video/fbdev/uvesafb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/fbdev/uvesafb.c b/drivers/video/fbdev/uvesafb.c index bee29aadc646..def14ac0ebe1 100644 --- a/drivers/video/fbdev/uvesafb.c +++ b/drivers/video/fbdev/uvesafb.c @@ -1836,7 +1836,7 @@ static int uvesafb_setup(char *options) else if (!strcmp(this_opt, "noedid")) noedid = true; else if (!strcmp(this_opt, "noblank")) - blank = true; + blank = false; else if (!strncmp(this_opt, "vtotal:", 7)) vram_total = simple_strtoul(this_opt + 7, NULL, 0); else if (!strncmp(this_opt, "vremap:", 7)) From 77577de64167aa0643d47ffbaacf3642632b321b Mon Sep 17 00:00:00 2001 From: Xiyu Yang Date: Sat, 13 Jun 2020 20:27:09 +0800 Subject: [PATCH 272/618] cifs: Fix cached_fid refcnt leak in open_shroot open_shroot() invokes kref_get(), which increases the refcount of the "tcon->crfid" object. When open_shroot() returns not zero, it means the open operation failed and close_shroot() will not be called to decrement the refcount of the "tcon->crfid". The reference counting issue happens in one normal path of open_shroot(). When the cached root have been opened successfully in a concurrent process, the function increases the refcount and jump to "oshr_free" to return. However the current return value "rc" may not equal to 0, thus the increased refcount will not be balanced outside the function, causing a refcnt leak. Fix this issue by setting the value of "rc" to 0 before jumping to "oshr_free" label. Signed-off-by: Xiyu Yang Signed-off-by: Xin Tan Signed-off-by: Steve French CC: Stable --- fs/cifs/smb2ops.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index 736d86b8a910..28553d45604e 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -763,6 +763,7 @@ int open_shroot(unsigned int xid, struct cifs_tcon *tcon, /* close extra handle outside of crit sec */ SMB2_close(xid, tcon, fid.persistent_fid, fid.volatile_fid); } + rc = 0; goto oshr_free; } From 7e4773f73dcfb92e7e33532162f722ec291e75a4 Mon Sep 17 00:00:00 2001 From: Arseny Solokha Date: Sat, 13 Jun 2020 23:28:01 +0700 Subject: [PATCH 273/618] powerpc/fsl_booke/32: Fix build with CONFIG_RANDOMIZE_BASE Building the current 5.8 kernel for an e500 machine with CONFIG_RANDOMIZE_BASE=y and CONFIG_BLOCK=n yields the following failure: arch/powerpc/mm/nohash/kaslr_booke.c: In function 'kaslr_early_init': arch/powerpc/mm/nohash/kaslr_booke.c:387:2: error: implicit declaration of function 'flush_icache_range'; did you mean 'flush_tlb_range'? Indeed, including asm/cacheflush.h into kaslr_booke.c fixes the build. Fixes: 2b0e86cc5de6 ("powerpc/fsl_booke/32: implement KASLR infrastructure") Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Arseny Solokha Reviewed-by: Jason Yan Acked-by: Scott Wood [mpe: Tweak change log to mention CONFIG_BLOCK=n] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200613162801.1946619-1-asolokha@kb.kras.ru --- arch/powerpc/mm/nohash/kaslr_booke.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/mm/nohash/kaslr_booke.c b/arch/powerpc/mm/nohash/kaslr_booke.c index 4a75f2d9bf0e..bce0e5349978 100644 --- a/arch/powerpc/mm/nohash/kaslr_booke.c +++ b/arch/powerpc/mm/nohash/kaslr_booke.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include From c1ed1754f271f6b7acb1bfdc8cfb62220fbed423 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Thu, 11 Jun 2020 17:31:59 +0530 Subject: [PATCH 274/618] powerpc/kvm/book3s64: Fix kernel crash with nested kvm & DEBUG_VIRTUAL With CONFIG_DEBUG_VIRTUAL=y, __pa() checks for addr value and if it's less than PAGE_OFFSET it leads to a BUG(). #define __pa(x) ({ VIRTUAL_BUG_ON((unsigned long)(x) < PAGE_OFFSET); (unsigned long)(x) & 0x0fffffffffffffffUL; }) kernel BUG at arch/powerpc/kvm/book3s_64_mmu_radix.c:43! cpu 0x70: Vector: 700 (Program Check) at [c0000018a2187360] pc: c000000000161b30: __kvmhv_copy_tofrom_guest_radix+0x130/0x1f0 lr: c000000000161d5c: kvmhv_copy_from_guest_radix+0x3c/0x80 ... kvmhv_copy_from_guest_radix+0x3c/0x80 kvmhv_load_from_eaddr+0x48/0xc0 kvmppc_ld+0x98/0x1e0 kvmppc_load_last_inst+0x50/0x90 kvmppc_hv_emulate_mmio+0x288/0x2b0 kvmppc_book3s_radix_page_fault+0xd8/0x2b0 kvmppc_book3s_hv_page_fault+0x37c/0x1050 kvmppc_vcpu_run_hv+0xbb8/0x1080 kvmppc_vcpu_run+0x34/0x50 kvm_arch_vcpu_ioctl_run+0x2fc/0x410 kvm_vcpu_ioctl+0x2b4/0x8f0 ksys_ioctl+0xf4/0x150 sys_ioctl+0x28/0x80 system_call_exception+0x104/0x1d0 system_call_common+0xe8/0x214 kvmhv_copy_tofrom_guest_radix() uses a NULL value for to/from to indicate direction of copy. Avoid calling __pa() if the value is NULL to avoid the BUG(). Signed-off-by: Aneesh Kumar K.V [mpe: Massage change log a bit to mention CONFIG_DEBUG_VIRTUAL] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200611120159.680284-1-aneesh.kumar@linux.ibm.com --- arch/powerpc/kvm/book3s_64_mmu_radix.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kvm/book3s_64_mmu_radix.c b/arch/powerpc/kvm/book3s_64_mmu_radix.c index e738ea652192..6a73714759ba 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_radix.c +++ b/arch/powerpc/kvm/book3s_64_mmu_radix.c @@ -40,7 +40,8 @@ unsigned long __kvmhv_copy_tofrom_guest_radix(int lpid, int pid, /* Can't access quadrants 1 or 2 in non-HV mode, call the HV to do it */ if (kvmhv_on_pseries()) return plpar_hcall_norets(H_COPY_TOFROM_GUEST, lpid, pid, eaddr, - __pa(to), __pa(from), n); + (to != NULL) ? __pa(to): 0, + (from != NULL) ? __pa(from): 0, n); quadrant = 1; if (!pid) From 7684580d45bd3d84ed9b453a4cadf7a9a5605a3f Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 22 Jun 2020 13:05:40 +0200 Subject: [PATCH 275/618] spi: spi-fsl-dspi: Fix lockup if device is removed during SPI transfer During device removal, the driver should unregister the SPI controller and stop the hardware. Otherwise the dspi_transfer_one_message() could wait on completion infinitely. Additionally, calling spi_unregister_controller() first in device removal reverse-matches the probe function, where SPI controller is registered at the end. Fixes: 05209f457069 ("spi: fsl-dspi: add missing clk_disable_unprepare() in dspi_remove()") Reported-by: Vladimir Oltean Signed-off-by: Krzysztof Kozlowski Cc: Link: https://lore.kernel.org/r/20200622110543.5035-1-krzk@kernel.org Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-dspi.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 58190c94561f..ec0fd0d366eb 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -1434,9 +1434,18 @@ static int dspi_remove(struct platform_device *pdev) struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr); /* Disconnect from the SPI framework */ + spi_unregister_controller(dspi->ctlr); + + /* Disable RX and TX */ + regmap_update_bits(dspi->regmap, SPI_MCR, + SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF, + SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF); + + /* Stop Running */ + regmap_update_bits(dspi->regmap, SPI_MCR, SPI_MCR_HALT, SPI_MCR_HALT); + dspi_release_dma(dspi); clk_disable_unprepare(dspi->clk); - spi_unregister_controller(dspi->ctlr); return 0; } From 3c525b69e8c1a9a6944e976603c7a1a713e728f9 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 22 Jun 2020 13:05:41 +0200 Subject: [PATCH 276/618] spi: spi-fsl-dspi: Fix lockup if device is shutdown during SPI transfer During shutdown, the driver should unregister the SPI controller and stop the hardware. Otherwise the dspi_transfer_one_message() could wait on completion infinitely. Additionally, calling spi_unregister_controller() first in device shutdown reverse-matches the probe function, where SPI controller is registered at the end. Fixes: dc234825997e ("spi: spi-fsl-dspi: Adding shutdown hook") Reported-by: Vladimir Oltean Signed-off-by: Krzysztof Kozlowski Tested-by: Vladimir Oltean Reviewed-by: Vladimir Oltean Cc: Link: https://lore.kernel.org/r/20200622110543.5035-2-krzk@kernel.org Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-dspi.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index ec0fd0d366eb..ec7919d9c0d9 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -1452,20 +1452,7 @@ static int dspi_remove(struct platform_device *pdev) static void dspi_shutdown(struct platform_device *pdev) { - struct spi_controller *ctlr = platform_get_drvdata(pdev); - struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr); - - /* Disable RX and TX */ - regmap_update_bits(dspi->regmap, SPI_MCR, - SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF, - SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF); - - /* Stop Running */ - regmap_update_bits(dspi->regmap, SPI_MCR, SPI_MCR_HALT, SPI_MCR_HALT); - - dspi_release_dma(dspi); - clk_disable_unprepare(dspi->clk); - spi_unregister_controller(dspi->ctlr); + dspi_remove(pdev); } static struct platform_driver fsl_dspi_driver = { From 3d87b613d6a3c6f0980e877ab0895785a2dde581 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 22 Jun 2020 13:05:42 +0200 Subject: [PATCH 277/618] spi: spi-fsl-dspi: Fix external abort on interrupt in resume or exit paths If shared interrupt comes late, during probe error path or device remove (could be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler dspi_interrupt() will access registers with the clock being disabled. This leads to external abort on non-linefetch on Toradex Colibri VF50 module (with Vybrid VF5xx): $ echo 4002d000.spi > /sys/devices/platform/soc/40000000.bus/4002d000.spi/driver/unbind Unhandled fault: external abort on non-linefetch (0x1008) at 0x8887f02c Internal error: : 1008 [#1] ARM Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) Backtrace: (regmap_mmio_read32le) (regmap_mmio_read) (_regmap_bus_reg_read) (_regmap_read) (regmap_read) (dspi_interrupt) (free_irq) (devm_irq_release) (release_nodes) (devres_release_all) (device_release_driver_internal) The resource-managed framework should not be used for shared interrupt handling, because the interrupt handler might be called after releasing other resources and disabling clocks. Similar bug could happen during suspend - the shared interrupt handler could be invoked after suspending the device. Each device sharing this interrupt line should disable the IRQ during suspend so handler will be invoked only in following cases: 1. None suspended, 2. All devices resumed. Fixes: 349ad66c0ab0 ("spi:Add Freescale DSPI driver for Vybrid VF610 platform") Signed-off-by: Krzysztof Kozlowski Tested-by: Vladimir Oltean Reviewed-by: Vladimir Oltean Cc: Link: https://lore.kernel.org/r/20200622110543.5035-3-krzk@kernel.org Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-dspi.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index ec7919d9c0d9..e0b30e4b1b69 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -1109,6 +1109,8 @@ static int dspi_suspend(struct device *dev) struct spi_controller *ctlr = dev_get_drvdata(dev); struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr); + if (dspi->irq) + disable_irq(dspi->irq); spi_controller_suspend(ctlr); clk_disable_unprepare(dspi->clk); @@ -1129,6 +1131,8 @@ static int dspi_resume(struct device *dev) if (ret) return ret; spi_controller_resume(ctlr); + if (dspi->irq) + enable_irq(dspi->irq); return 0; } @@ -1385,8 +1389,8 @@ static int dspi_probe(struct platform_device *pdev) goto poll_mode; } - ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt, - IRQF_SHARED, pdev->name, dspi); + ret = request_threaded_irq(dspi->irq, dspi_interrupt, NULL, + IRQF_SHARED, pdev->name, dspi); if (ret < 0) { dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n"); goto out_clk_put; @@ -1400,7 +1404,7 @@ static int dspi_probe(struct platform_device *pdev) ret = dspi_request_dma(dspi, res->start); if (ret < 0) { dev_err(&pdev->dev, "can't get dma channels\n"); - goto out_clk_put; + goto out_free_irq; } } @@ -1415,11 +1419,14 @@ static int dspi_probe(struct platform_device *pdev) ret = spi_register_controller(ctlr); if (ret != 0) { dev_err(&pdev->dev, "Problem registering DSPI ctlr\n"); - goto out_clk_put; + goto out_free_irq; } return ret; +out_free_irq: + if (dspi->irq) + free_irq(dspi->irq, dspi); out_clk_put: clk_disable_unprepare(dspi->clk); out_ctlr_put: @@ -1445,6 +1452,8 @@ static int dspi_remove(struct platform_device *pdev) regmap_update_bits(dspi->regmap, SPI_MCR, SPI_MCR_HALT, SPI_MCR_HALT); dspi_release_dma(dspi); + if (dspi->irq) + free_irq(dspi->irq, dspi); clk_disable_unprepare(dspi->clk); return 0; From f148915f91fccd8c3df1b0bff7d1c8458cad3be5 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 22 Jun 2020 13:05:43 +0200 Subject: [PATCH 278/618] spi: spi-fsl-dspi: Initialize completion before possible interrupt The interrupt handler calls completion and is IRQ requested before the completion is initialized. Logically it should be the other way. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20200622110543.5035-4-krzk@kernel.org Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-dspi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index e0b30e4b1b69..91c6affe139c 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -1389,6 +1389,8 @@ static int dspi_probe(struct platform_device *pdev) goto poll_mode; } + init_completion(&dspi->xfer_done); + ret = request_threaded_irq(dspi->irq, dspi_interrupt, NULL, IRQF_SHARED, pdev->name, dspi); if (ret < 0) { @@ -1396,8 +1398,6 @@ static int dspi_probe(struct platform_device *pdev) goto out_clk_put; } - init_completion(&dspi->xfer_done); - poll_mode: if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) { From 2acc5cae292355f5f18ad377a2a966e7f03c8fec Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 15 Jun 2020 09:20:52 -0400 Subject: [PATCH 279/618] xprtrdma: Prevent dereferencing r_xprt->rx_ep after it is freed r_xprt->rx_ep is known to be good while the transport's send lock is held. Otherwise additional references on rx_ep must be held when it is used outside of that lock's critical sections. For now, bump the rx_ep reference count once whenever there is at least one outstanding Receive WR. This avoids the memory bandwidth overhead of taking and releasing the reference count for every ib_post_recv() and Receive completion. Signed-off-by: Chuck Lever Signed-off-by: Anna Schumaker --- net/sunrpc/xprtrdma/verbs.c | 33 +++++++++++++++++++++++---------- 1 file changed, 23 insertions(+), 10 deletions(-) diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c index 2ae348377806..b021baa4b28d 100644 --- a/net/sunrpc/xprtrdma/verbs.c +++ b/net/sunrpc/xprtrdma/verbs.c @@ -84,7 +84,8 @@ static void rpcrdma_rep_destroy(struct rpcrdma_rep *rep); static void rpcrdma_reps_unmap(struct rpcrdma_xprt *r_xprt); static void rpcrdma_mrs_create(struct rpcrdma_xprt *r_xprt); static void rpcrdma_mrs_destroy(struct rpcrdma_xprt *r_xprt); -static int rpcrdma_ep_destroy(struct rpcrdma_ep *ep); +static void rpcrdma_ep_get(struct rpcrdma_ep *ep); +static int rpcrdma_ep_put(struct rpcrdma_ep *ep); static struct rpcrdma_regbuf * rpcrdma_regbuf_alloc(size_t size, enum dma_data_direction direction, gfp_t flags); @@ -97,7 +98,8 @@ static void rpcrdma_regbuf_free(struct rpcrdma_regbuf *rb); */ static void rpcrdma_xprt_drain(struct rpcrdma_xprt *r_xprt) { - struct rdma_cm_id *id = r_xprt->rx_ep->re_id; + struct rpcrdma_ep *ep = r_xprt->rx_ep; + struct rdma_cm_id *id = ep->re_id; /* Flush Receives, then wait for deferred Reply work * to complete. @@ -108,6 +110,8 @@ static void rpcrdma_xprt_drain(struct rpcrdma_xprt *r_xprt) * local invalidations. */ ib_drain_sq(id->qp); + + rpcrdma_ep_put(ep); } /** @@ -266,7 +270,7 @@ rpcrdma_cm_event_handler(struct rdma_cm_id *id, struct rdma_cm_event *event) xprt_force_disconnect(xprt); goto disconnected; case RDMA_CM_EVENT_ESTABLISHED: - kref_get(&ep->re_kref); + rpcrdma_ep_get(ep); ep->re_connect_status = 1; rpcrdma_update_cm_private(ep, &event->param.conn); trace_xprtrdma_inline_thresh(ep); @@ -289,7 +293,7 @@ rpcrdma_cm_event_handler(struct rdma_cm_id *id, struct rdma_cm_event *event) ep->re_connect_status = -ECONNABORTED; disconnected: xprt_force_disconnect(xprt); - return rpcrdma_ep_destroy(ep); + return rpcrdma_ep_put(ep); default: break; } @@ -345,7 +349,7 @@ static struct rdma_cm_id *rpcrdma_create_id(struct rpcrdma_xprt *r_xprt, return ERR_PTR(rc); } -static void rpcrdma_ep_put(struct kref *kref) +static void rpcrdma_ep_destroy(struct kref *kref) { struct rpcrdma_ep *ep = container_of(kref, struct rpcrdma_ep, re_kref); @@ -369,13 +373,18 @@ static void rpcrdma_ep_put(struct kref *kref) module_put(THIS_MODULE); } +static noinline void rpcrdma_ep_get(struct rpcrdma_ep *ep) +{ + kref_get(&ep->re_kref); +} + /* Returns: * %0 if @ep still has a positive kref count, or * %1 if @ep was destroyed successfully. */ -static int rpcrdma_ep_destroy(struct rpcrdma_ep *ep) +static noinline int rpcrdma_ep_put(struct rpcrdma_ep *ep) { - return kref_put(&ep->re_kref, rpcrdma_ep_put); + return kref_put(&ep->re_kref, rpcrdma_ep_destroy); } static int rpcrdma_ep_create(struct rpcrdma_xprt *r_xprt) @@ -492,7 +501,7 @@ static int rpcrdma_ep_create(struct rpcrdma_xprt *r_xprt) return 0; out_destroy: - rpcrdma_ep_destroy(ep); + rpcrdma_ep_put(ep); rdma_destroy_id(id); out_free: kfree(ep); @@ -521,8 +530,12 @@ int rpcrdma_xprt_connect(struct rpcrdma_xprt *r_xprt) ep->re_connect_status = 0; xprt_clear_connected(xprt); - rpcrdma_reset_cwnd(r_xprt); + + /* Bump the ep's reference count while there are + * outstanding Receives. + */ + rpcrdma_ep_get(ep); rpcrdma_post_recvs(r_xprt, true); rc = rpcrdma_sendctxs_create(r_xprt); @@ -587,7 +600,7 @@ void rpcrdma_xprt_disconnect(struct rpcrdma_xprt *r_xprt) rpcrdma_mrs_destroy(r_xprt); rpcrdma_sendctxs_destroy(r_xprt); - if (rpcrdma_ep_destroy(ep)) + if (rpcrdma_ep_put(ep)) rdma_destroy_id(id); r_xprt->rx_ep = NULL; From 2d97f4637666704953dfbb10322c2b73bb53d5e7 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 15 Jun 2020 09:20:57 -0400 Subject: [PATCH 280/618] xprtrdma: Use re_connect_status safely in rpcrdma_xprt_connect() Clean up: Sometimes creating a fresh rpcrdma_ep can fail. That's why xprt_rdma_connect() always checks if the r_xprt->rx_ep pointer is valid before dereferencing it. Instead, xprt_rdma_connect() can simply check rpcrdma_xprt_connect()'s return value. Also, there's no need to set re_connect_status to zero just after the rpcrdma_ep is created, since it is allocated with kzalloc. Signed-off-by: Chuck Lever Signed-off-by: Anna Schumaker --- net/sunrpc/xprtrdma/transport.c | 2 +- net/sunrpc/xprtrdma/verbs.c | 3 --- 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c index 0c4af7f5e241..14165b673b20 100644 --- a/net/sunrpc/xprtrdma/transport.c +++ b/net/sunrpc/xprtrdma/transport.c @@ -242,7 +242,7 @@ xprt_rdma_connect_worker(struct work_struct *work) rc = rpcrdma_xprt_connect(r_xprt); xprt_clear_connecting(xprt); - if (r_xprt->rx_ep && r_xprt->rx_ep->re_connect_status > 0) { + if (!rc) { xprt->connect_cookie++; xprt->stat.connect_count++; xprt->stat.connect_time += (long)jiffies - diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c index b021baa4b28d..b172e43cb204 100644 --- a/net/sunrpc/xprtrdma/verbs.c +++ b/net/sunrpc/xprtrdma/verbs.c @@ -528,7 +528,6 @@ int rpcrdma_xprt_connect(struct rpcrdma_xprt *r_xprt) return rc; ep = r_xprt->rx_ep; - ep->re_connect_status = 0; xprt_clear_connected(xprt); rpcrdma_reset_cwnd(r_xprt); @@ -565,8 +564,6 @@ int rpcrdma_xprt_connect(struct rpcrdma_xprt *r_xprt) rpcrdma_mrs_create(r_xprt); out: - if (rc) - ep->re_connect_status = rc; trace_xprtrdma_connect(r_xprt, rc); return rc; } From f423f755f41e4944fb4cd1c259cbf2ba3608d647 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 15 Jun 2020 09:21:02 -0400 Subject: [PATCH 281/618] xprtrdma: Clean up synopsis of rpcrdma_flush_disconnect() Refactor: Pass struct rpcrdma_xprt instead of an IB layer object. Signed-off-by: Chuck Lever Signed-off-by: Anna Schumaker --- net/sunrpc/xprtrdma/frwr_ops.c | 8 ++++---- net/sunrpc/xprtrdma/verbs.c | 12 ++++++------ net/sunrpc/xprtrdma/xprt_rdma.h | 2 +- 3 files changed, 11 insertions(+), 11 deletions(-) diff --git a/net/sunrpc/xprtrdma/frwr_ops.c b/net/sunrpc/xprtrdma/frwr_ops.c index ef997880e17a..b647562a26dd 100644 --- a/net/sunrpc/xprtrdma/frwr_ops.c +++ b/net/sunrpc/xprtrdma/frwr_ops.c @@ -367,7 +367,7 @@ static void frwr_wc_fastreg(struct ib_cq *cq, struct ib_wc *wc) trace_xprtrdma_wc_fastreg(wc, frwr); /* The MR will get recycled when the associated req is retransmitted */ - rpcrdma_flush_disconnect(cq, wc); + rpcrdma_flush_disconnect(cq->cq_context, wc); } /** @@ -452,7 +452,7 @@ static void frwr_wc_localinv(struct ib_cq *cq, struct ib_wc *wc) trace_xprtrdma_wc_li(wc, frwr); __frwr_release_mr(wc, mr); - rpcrdma_flush_disconnect(cq, wc); + rpcrdma_flush_disconnect(cq->cq_context, wc); } /** @@ -474,7 +474,7 @@ static void frwr_wc_localinv_wake(struct ib_cq *cq, struct ib_wc *wc) __frwr_release_mr(wc, mr); complete(&frwr->fr_linv_done); - rpcrdma_flush_disconnect(cq, wc); + rpcrdma_flush_disconnect(cq->cq_context, wc); } /** @@ -582,7 +582,7 @@ static void frwr_wc_localinv_done(struct ib_cq *cq, struct ib_wc *wc) smp_rmb(); rpcrdma_complete_rqst(rep); - rpcrdma_flush_disconnect(cq, wc); + rpcrdma_flush_disconnect(cq->cq_context, wc); } /** diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c index b172e43cb204..7a112612fc8f 100644 --- a/net/sunrpc/xprtrdma/verbs.c +++ b/net/sunrpc/xprtrdma/verbs.c @@ -132,14 +132,13 @@ static void rpcrdma_qp_event_handler(struct ib_event *event, void *context) /** * rpcrdma_flush_disconnect - Disconnect on flushed completion - * @cq: completion queue + * @r_xprt: transport to disconnect * @wc: work completion entry * * Must be called in process context. */ -void rpcrdma_flush_disconnect(struct ib_cq *cq, struct ib_wc *wc) +void rpcrdma_flush_disconnect(struct rpcrdma_xprt *r_xprt, struct ib_wc *wc) { - struct rpcrdma_xprt *r_xprt = cq->cq_context; struct rpc_xprt *xprt = &r_xprt->rx_xprt; if (wc->status != IB_WC_SUCCESS && @@ -160,11 +159,12 @@ static void rpcrdma_wc_send(struct ib_cq *cq, struct ib_wc *wc) struct ib_cqe *cqe = wc->wr_cqe; struct rpcrdma_sendctx *sc = container_of(cqe, struct rpcrdma_sendctx, sc_cqe); + struct rpcrdma_xprt *r_xprt = cq->cq_context; /* WARNING: Only wr_cqe and status are reliable at this point */ trace_xprtrdma_wc_send(sc, wc); - rpcrdma_sendctx_put_locked((struct rpcrdma_xprt *)cq->cq_context, sc); - rpcrdma_flush_disconnect(cq, wc); + rpcrdma_sendctx_put_locked(r_xprt, sc); + rpcrdma_flush_disconnect(r_xprt, wc); } /** @@ -199,7 +199,7 @@ static void rpcrdma_wc_receive(struct ib_cq *cq, struct ib_wc *wc) return; out_flushed: - rpcrdma_flush_disconnect(cq, wc); + rpcrdma_flush_disconnect(r_xprt, wc); rpcrdma_rep_destroy(rep); } diff --git a/net/sunrpc/xprtrdma/xprt_rdma.h b/net/sunrpc/xprtrdma/xprt_rdma.h index 0a16fdb09b2c..098d05a62ead 100644 --- a/net/sunrpc/xprtrdma/xprt_rdma.h +++ b/net/sunrpc/xprtrdma/xprt_rdma.h @@ -446,7 +446,7 @@ extern unsigned int xprt_rdma_memreg_strategy; /* * Endpoint calls - xprtrdma/verbs.c */ -void rpcrdma_flush_disconnect(struct ib_cq *cq, struct ib_wc *wc); +void rpcrdma_flush_disconnect(struct rpcrdma_xprt *r_xprt, struct ib_wc *wc); int rpcrdma_xprt_connect(struct rpcrdma_xprt *r_xprt); void rpcrdma_xprt_disconnect(struct rpcrdma_xprt *r_xprt); From c487eb7d8e41579d87216ce43152acd336f2c4aa Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 15 Jun 2020 09:21:07 -0400 Subject: [PATCH 282/618] xprtrdma: Clean up disconnect 1. Ensure that only rpcrdma_cm_event_handler() modifies ep->re_connect_status to avoid racy changes to that field. 2. Ensure that xprt_force_disconnect() is invoked only once as a transport is closed or destroyed. Signed-off-by: Chuck Lever Signed-off-by: Anna Schumaker --- net/sunrpc/xprtrdma/verbs.c | 23 +++++++++++++---------- net/sunrpc/xprtrdma/xprt_rdma.h | 1 + 2 files changed, 14 insertions(+), 10 deletions(-) diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c index 7a112612fc8f..2198c8ec8dff 100644 --- a/net/sunrpc/xprtrdma/verbs.c +++ b/net/sunrpc/xprtrdma/verbs.c @@ -130,6 +130,16 @@ static void rpcrdma_qp_event_handler(struct ib_event *event, void *context) trace_xprtrdma_qp_event(ep, event); } +/* Ensure xprt_force_disconnect() is invoked exactly once when a + * connection is closed or lost. (The important thing is it needs + * to be invoked "at least" once). + */ +static void rpcrdma_force_disconnect(struct rpcrdma_ep *ep) +{ + if (atomic_add_unless(&ep->re_force_disconnect, 1, 1)) + xprt_force_disconnect(ep->re_xprt); +} + /** * rpcrdma_flush_disconnect - Disconnect on flushed completion * @r_xprt: transport to disconnect @@ -139,13 +149,8 @@ static void rpcrdma_qp_event_handler(struct ib_event *event, void *context) */ void rpcrdma_flush_disconnect(struct rpcrdma_xprt *r_xprt, struct ib_wc *wc) { - struct rpc_xprt *xprt = &r_xprt->rx_xprt; - - if (wc->status != IB_WC_SUCCESS && - r_xprt->rx_ep->re_connect_status == 1) { - r_xprt->rx_ep->re_connect_status = -ECONNABORTED; - xprt_force_disconnect(xprt); - } + if (wc->status != IB_WC_SUCCESS) + rpcrdma_force_disconnect(r_xprt->rx_ep); } /** @@ -243,7 +248,6 @@ rpcrdma_cm_event_handler(struct rdma_cm_id *id, struct rdma_cm_event *event) { struct sockaddr *sap = (struct sockaddr *)&id->route.addr.dst_addr; struct rpcrdma_ep *ep = id->context; - struct rpc_xprt *xprt = ep->re_xprt; might_sleep(); @@ -267,7 +271,6 @@ rpcrdma_cm_event_handler(struct rdma_cm_id *id, struct rdma_cm_event *event) /* fall through */ case RDMA_CM_EVENT_ADDR_CHANGE: ep->re_connect_status = -ENODEV; - xprt_force_disconnect(xprt); goto disconnected; case RDMA_CM_EVENT_ESTABLISHED: rpcrdma_ep_get(ep); @@ -292,7 +295,7 @@ rpcrdma_cm_event_handler(struct rdma_cm_id *id, struct rdma_cm_event *event) case RDMA_CM_EVENT_DISCONNECTED: ep->re_connect_status = -ECONNABORTED; disconnected: - xprt_force_disconnect(xprt); + rpcrdma_force_disconnect(ep); return rpcrdma_ep_put(ep); default: break; diff --git a/net/sunrpc/xprtrdma/xprt_rdma.h b/net/sunrpc/xprtrdma/xprt_rdma.h index 098d05a62ead..43974ef39a50 100644 --- a/net/sunrpc/xprtrdma/xprt_rdma.h +++ b/net/sunrpc/xprtrdma/xprt_rdma.h @@ -82,6 +82,7 @@ struct rpcrdma_ep { unsigned int re_max_inline_recv; int re_async_rc; int re_connect_status; + atomic_t re_force_disconnect; struct ib_qp_init_attr re_attr; wait_queue_head_t re_connect_wait; struct rpc_xprt *re_xprt; From 7b2182ec381f8ea15c7eb1266d6b5d7da620ad93 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 15 Jun 2020 09:21:13 -0400 Subject: [PATCH 283/618] xprtrdma: Fix handling of RDMA_ERROR replies The RPC client currently doesn't handle ERR_CHUNK replies correctly. rpcrdma_complete_rqst() incorrectly passes a negative number to xprt_complete_rqst() as the number of bytes copied. Instead, set task->tk_status to the error value, and return zero bytes copied. In these cases, return -EIO rather than -EREMOTEIO. The RPC client's finite state machine doesn't know what to do with -EREMOTEIO. Additional clean ups: - Don't double-count RDMA_ERROR replies - Remove a stale comment Signed-off-by: Chuck Lever Cc: Signed-off-by: Anna Schumaker --- net/sunrpc/xprtrdma/rpc_rdma.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/net/sunrpc/xprtrdma/rpc_rdma.c b/net/sunrpc/xprtrdma/rpc_rdma.c index 2081c8fbfa48..935bbef2f7be 100644 --- a/net/sunrpc/xprtrdma/rpc_rdma.c +++ b/net/sunrpc/xprtrdma/rpc_rdma.c @@ -1349,8 +1349,7 @@ rpcrdma_decode_error(struct rpcrdma_xprt *r_xprt, struct rpcrdma_rep *rep, be32_to_cpup(p), be32_to_cpu(rep->rr_xid)); } - r_xprt->rx_stats.bad_reply_count++; - return -EREMOTEIO; + return -EIO; } /* Perform XID lookup, reconstruction of the RPC reply, and @@ -1387,13 +1386,11 @@ void rpcrdma_complete_rqst(struct rpcrdma_rep *rep) spin_unlock(&xprt->queue_lock); return; -/* If the incoming reply terminated a pending RPC, the next - * RPC call will post a replacement receive buffer as it is - * being marshaled. - */ out_badheader: trace_xprtrdma_reply_hdr(rep); r_xprt->rx_stats.bad_reply_count++; + rqst->rq_task->tk_status = status; + status = 0; goto out; } From 75b0cea7bf307f362057cc778efe89af4c615354 Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Mon, 15 Jun 2020 04:43:32 -0600 Subject: [PATCH 284/618] ACPI: configfs: Disallow loading ACPI tables when locked down Like other vectors already patched, this one here allows the root user to load ACPI tables, which enables arbitrary physical address writes, which in turn makes it possible to disable lockdown. Prevents this by checking the lockdown status before allowing a new ACPI table to be installed. The link in the trailer shows a PoC of how this might be used. Link: https://git.zx2c4.com/american-unsigned-language/tree/american-unsigned-language-2.sh Cc: 5.4+ # 5.4+ Signed-off-by: Jason A. Donenfeld Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_configfs.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/acpi_configfs.c b/drivers/acpi/acpi_configfs.c index ece8c1a921cc..88c8af455ea3 100644 --- a/drivers/acpi/acpi_configfs.c +++ b/drivers/acpi/acpi_configfs.c @@ -11,6 +11,7 @@ #include #include #include +#include #include "acpica/accommon.h" #include "acpica/actables.h" @@ -28,7 +29,10 @@ static ssize_t acpi_table_aml_write(struct config_item *cfg, { const struct acpi_table_header *header = data; struct acpi_table *table; - int ret; + int ret = security_locked_down(LOCKDOWN_ACPI_TABLES); + + if (ret) + return ret; table = container_of(cfg, struct acpi_table, cfg); From e6d701dca9893990d999fd145e3e07223c002b06 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Thu, 11 Jun 2020 21:51:50 -0700 Subject: [PATCH 285/618] ACPI: sysfs: Fix pm_profile_attr type When running a kernel with Clang's Control Flow Integrity implemented, there is a violation that happens when accessing /sys/firmware/acpi/pm_profile: $ cat /sys/firmware/acpi/pm_profile 0 $ dmesg ... [ 17.352564] ------------[ cut here ]------------ [ 17.352568] CFI failure (target: acpi_show_profile+0x0/0x8): [ 17.352572] WARNING: CPU: 3 PID: 497 at kernel/cfi.c:29 __cfi_check_fail+0x33/0x40 [ 17.352573] Modules linked in: [ 17.352575] CPU: 3 PID: 497 Comm: cat Tainted: G W 5.7.0-microsoft-standard+ #1 [ 17.352576] RIP: 0010:__cfi_check_fail+0x33/0x40 [ 17.352577] Code: 48 c7 c7 50 b3 85 84 48 c7 c6 50 0a 4e 84 e8 a4 d8 60 00 85 c0 75 02 5b c3 48 c7 c7 dc 5e 49 84 48 89 de 31 c0 e8 7d 06 eb ff <0f> 0b 5b c3 00 00 cc cc 00 00 cc cc 00 85 f6 74 25 41 b9 ea ff ff [ 17.352577] RSP: 0018:ffffaa6dc3c53d30 EFLAGS: 00010246 [ 17.352578] RAX: 331267e0c06cee00 RBX: ffffffff83d85890 RCX: ffffffff8483a6f8 [ 17.352579] RDX: ffff9cceabbb37c0 RSI: 0000000000000082 RDI: ffffffff84bb9e1c [ 17.352579] RBP: ffffffff845b2bc8 R08: 0000000000000001 R09: ffff9cceabbba200 [ 17.352579] R10: 000000000000019d R11: 0000000000000000 R12: ffff9cc947766f00 [ 17.352580] R13: ffffffff83d6bd50 R14: ffff9ccc6fa80000 R15: ffffffff845bd328 [ 17.352582] FS: 00007fdbc8d13580(0000) GS:ffff9cce91ac0000(0000) knlGS:0000000000000000 [ 17.352582] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 17.352583] CR2: 00007fdbc858e000 CR3: 00000005174d0000 CR4: 0000000000340ea0 [ 17.352584] Call Trace: [ 17.352586] ? rev_id_show+0x8/0x8 [ 17.352587] ? __cfi_check+0x45bac/0x4b640 [ 17.352589] ? kobj_attr_show+0x73/0x80 [ 17.352590] ? sysfs_kf_seq_show+0xc1/0x140 [ 17.352592] ? ext4_seq_options_show.cfi_jt+0x8/0x8 [ 17.352593] ? seq_read+0x180/0x600 [ 17.352595] ? sysfs_create_file_ns.cfi_jt+0x10/0x10 [ 17.352596] ? tlbflush_read_file+0x8/0x8 [ 17.352597] ? __vfs_read+0x6b/0x220 [ 17.352598] ? handle_mm_fault+0xa23/0x11b0 [ 17.352599] ? vfs_read+0xa2/0x130 [ 17.352599] ? ksys_read+0x6a/0xd0 [ 17.352601] ? __do_sys_getpgrp+0x8/0x8 [ 17.352602] ? do_syscall_64+0x72/0x120 [ 17.352603] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 17.352604] ---[ end trace 7b1fa81dc897e419 ]--- When /sys/firmware/acpi/pm_profile is read, sysfs_kf_seq_show is called, which in turn calls kobj_attr_show, which gets the ->show callback member by calling container_of on attr (casting it to struct kobj_attribute) then calls it. There is a CFI violation because pm_profile_attr is of type struct device_attribute but kobj_attr_show calls ->show expecting it to be from struct kobj_attribute. CFI checking ensures that function pointer types match when doing indirect calls. Fix pm_profile_attr to be defined in terms of kobj_attribute so there is no violation or mismatch. Fixes: 362b646062b2 ("ACPI: Export FADT pm_profile integer value to userspace") Link: https://github.com/ClangBuiltLinux/linux/issues/1051 Reported-by: yuu ichii Signed-off-by: Nathan Chancellor Cc: 3.10+ # 3.10+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/sysfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index 3a89909b50a6..76c668c05fa0 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -938,13 +938,13 @@ static void __exit interrupt_stats_exit(void) } static ssize_t -acpi_show_profile(struct device *dev, struct device_attribute *attr, +acpi_show_profile(struct kobject *kobj, struct kobj_attribute *attr, char *buf) { return sprintf(buf, "%d\n", acpi_gbl_FADT.preferred_profile); } -static const struct device_attribute pm_profile_attr = +static const struct kobj_attribute pm_profile_attr = __ATTR(pm_profile, S_IRUGO, acpi_show_profile, NULL); static ssize_t hotplug_enabled_show(struct kobject *kobj, From 24eae8ebfb29ca54980764245ffb8aa218666ff6 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Wed, 27 May 2020 14:05:28 +0800 Subject: [PATCH 286/618] vdpa: fix typos in the comments for __vdpa_alloc_device() Fix two typos in the comments for __vdpa_alloc_device(). Signed-off-by: Jason Wang Link: https://lore.kernel.org/r/20200527060528.9100-1-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin --- drivers/vdpa/vdpa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c index ff6562f602e0..de211ef3738c 100644 --- a/drivers/vdpa/vdpa.c +++ b/drivers/vdpa/vdpa.c @@ -63,7 +63,7 @@ static void vdpa_release_dev(struct device *d) * @config: the bus operations that is supported by this device * @size: size of the parent structure that contains private data * - * Drvier should use vdap_alloc_device() wrapper macro instead of + * Driver should use vdpa_alloc_device() wrapper macro instead of * using this directly. * * Returns an error when parent/config/dma_dev is not set or fail to get From c09cc2c319863f620caf5e723db496eed55f7c7f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 10 Jun 2020 11:58:52 +0300 Subject: [PATCH 287/618] vhost_vdpa: Fix potential underflow in vhost_vdpa_mmap() The "vma->vm_pgoff" variable is an unsigned long so if it's larger than INT_MAX then "index" can be negative leading to an underflow. Fix this by changing the type of "index" to "unsigned long". Fixes: ddd89d0a059d ("vhost_vdpa: support doorbell mapping via mmap") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20200610085852.GB5439@mwanda Signed-off-by: Michael S. Tsirkin --- drivers/vhost/vdpa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c index 7580e34f76c1..a54b60d6623f 100644 --- a/drivers/vhost/vdpa.c +++ b/drivers/vhost/vdpa.c @@ -818,7 +818,7 @@ static int vhost_vdpa_mmap(struct file *file, struct vm_area_struct *vma) struct vdpa_device *vdpa = v->vdpa; const struct vdpa_config_ops *ops = vdpa->config; struct vdpa_notification_area notify; - int index = vma->vm_pgoff; + unsigned long index = vma->vm_pgoff; if (vma->vm_end - vma->vm_start != PAGE_SIZE) return -EINVAL; From 1c3d69ab5348b661616992206357a3ebf19b1008 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 10 Jun 2020 11:59:11 +0300 Subject: [PATCH 288/618] virtio-mem: silence a static checker warning Smatch complains that "rc" can be uninitialized if we hit the "break;" statement on the first iteration through the loop. I suspect that this can't happen in real life, but returning a zero literal is cleaner and silence the static checker warning. Fixes: 5f1f79bbc9e2 ("virtio-mem: Paravirtualized memory hotplug") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20200610085911.GC5439@mwanda Signed-off-by: Michael S. Tsirkin --- drivers/virtio/virtio_mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/virtio/virtio_mem.c b/drivers/virtio/virtio_mem.c index 50c689f25045..5210ff0c5681 100644 --- a/drivers/virtio/virtio_mem.c +++ b/drivers/virtio/virtio_mem.c @@ -1192,7 +1192,7 @@ static int virtio_mem_mb_plug_any_sb(struct virtio_mem *vm, unsigned long mb_id, VIRTIO_MEM_MB_STATE_OFFLINE); } - return rc; + return 0; } /* From b3562c6087b585abba53d906f127d6fd5a92829c Mon Sep 17 00:00:00 2001 From: David Hildenbrand Date: Thu, 11 Jun 2020 11:35:18 +0200 Subject: [PATCH 289/618] virtio-mem: add memory via add_memory_driver_managed() Virtio-mem managed memory is always detected and added by the virtio-mem driver, never using something like the firmware-provided memory map. This is the case after an ordinary system reboot, and has to be guaranteed after kexec. Especially, virtio-mem added memory resources can contain inaccessible parts ("unblocked memory blocks"), blindly forwarding them to a kexec kernel is dangerous, as unplugged memory will get accessed (esp. written). Let's use the new way of adding special driver-managed memory introduced in commit 7b7b27214bba ("mm/memory_hotplug: introduce add_memory_driver_managed()"). This will result in no entries in /sys/firmware/memmap ("raw firmware- provided memory map"), the memory resource will be flagged IORESOURCE_MEM_DRIVER_MANAGED (esp., kexec_file_load() will not place kexec images on this memory), and it is exposed as "System RAM (virtio_mem)" in /proc/iomem, so esp. kexec-tools can properly handle it. Example /proc/iomem before this change: [...] 140000000-333ffffff : virtio0 140000000-147ffffff : System RAM 334000000-533ffffff : virtio1 338000000-33fffffff : System RAM 340000000-347ffffff : System RAM 348000000-34fffffff : System RAM [...] Example /proc/iomem after this change: [...] 140000000-333ffffff : virtio0 140000000-147ffffff : System RAM (virtio_mem) 334000000-533ffffff : virtio1 338000000-33fffffff : System RAM (virtio_mem) 340000000-347ffffff : System RAM (virtio_mem) 348000000-34fffffff : System RAM (virtio_mem) [...] Cc: "Michael S. Tsirkin" Cc: Pankaj Gupta Cc: teawater Fixes: 5f1f79bbc9e26 ("virtio-mem: Paravirtualized memory hotplug") Signed-off-by: David Hildenbrand Link: https://lore.kernel.org/r/20200611093518.5737-1-david@redhat.com Signed-off-by: Michael S. Tsirkin Reviewed-by: Pankaj Gupta --- drivers/virtio/virtio_mem.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) diff --git a/drivers/virtio/virtio_mem.c b/drivers/virtio/virtio_mem.c index 5210ff0c5681..f26f5f64ae82 100644 --- a/drivers/virtio/virtio_mem.c +++ b/drivers/virtio/virtio_mem.c @@ -101,6 +101,11 @@ struct virtio_mem { /* The parent resource for all memory added via this device. */ struct resource *parent_resource; + /* + * Copy of "System RAM (virtio_mem)" to be used for + * add_memory_driver_managed(). + */ + const char *resource_name; /* Summary of all memory block states. */ unsigned long nb_mb_state[VIRTIO_MEM_MB_STATE_COUNT]; @@ -414,8 +419,20 @@ static int virtio_mem_mb_add(struct virtio_mem *vm, unsigned long mb_id) if (nid == NUMA_NO_NODE) nid = memory_add_physaddr_to_nid(addr); + /* + * When force-unloading the driver and we still have memory added to + * Linux, the resource name has to stay. + */ + if (!vm->resource_name) { + vm->resource_name = kstrdup_const("System RAM (virtio_mem)", + GFP_KERNEL); + if (!vm->resource_name) + return -ENOMEM; + } + dev_dbg(&vm->vdev->dev, "adding memory block: %lu\n", mb_id); - return add_memory(nid, addr, memory_block_size_bytes()); + return add_memory_driver_managed(nid, addr, memory_block_size_bytes(), + vm->resource_name); } /* @@ -1890,10 +1907,12 @@ static void virtio_mem_remove(struct virtio_device *vdev) vm->nb_mb_state[VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL] || vm->nb_mb_state[VIRTIO_MEM_MB_STATE_ONLINE] || vm->nb_mb_state[VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL] || - vm->nb_mb_state[VIRTIO_MEM_MB_STATE_ONLINE_MOVABLE]) + vm->nb_mb_state[VIRTIO_MEM_MB_STATE_ONLINE_MOVABLE]) { dev_warn(&vdev->dev, "device still has system memory added\n"); - else + } else { virtio_mem_delete_resource(vm); + kfree_const(vm->resource_name); + } /* remove all tracking data - no locking needed */ vfree(vm->mb_state); From 633fae33d562dc2538cc3d6033a2d5e277050783 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Eugenio=20P=C3=A9rez?= Date: Sat, 18 Apr 2020 12:22:11 +0200 Subject: [PATCH 290/618] tools/virtio: Add --batch option MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This allow to test vhost having >1 buffers in flight Signed-off-by: Eugenio Pérez Link: https://lore.kernel.org/r/20200401183118.8334-5-eperezma@redhat.com Signed-off-by: Michael S. Tsirkin Link: https://lore.kernel.org/r/20200418102217.32327-3-eperezma@redhat.com Signed-off-by: Michael S. Tsirkin --- tools/virtio/virtio_test.c | 47 ++++++++++++++++++++++++++++++-------- 1 file changed, 37 insertions(+), 10 deletions(-) diff --git a/tools/virtio/virtio_test.c b/tools/virtio/virtio_test.c index b427def67e7e..c30de9088f3c 100644 --- a/tools/virtio/virtio_test.c +++ b/tools/virtio/virtio_test.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #define _GNU_SOURCE #include +#include #include #include #include @@ -152,11 +153,11 @@ static void wait_for_interrupt(struct vdev_info *dev) } static void run_test(struct vdev_info *dev, struct vq_info *vq, - bool delayed, int bufs) + bool delayed, int batch, int bufs) { struct scatterlist sl; long started = 0, completed = 0; - long completed_before; + long completed_before, started_before; int r, test = 1; unsigned len; long long spurious = 0; @@ -165,28 +166,42 @@ static void run_test(struct vdev_info *dev, struct vq_info *vq, for (;;) { virtqueue_disable_cb(vq->vq); completed_before = completed; + started_before = started; do { - if (started < bufs) { + while (started < bufs && + (started - completed) < batch) { sg_init_one(&sl, dev->buf, dev->buf_size); r = virtqueue_add_outbuf(vq->vq, &sl, 1, dev->buf + started, GFP_ATOMIC); - if (likely(r == 0)) { - ++started; - if (unlikely(!virtqueue_kick(vq->vq))) + if (unlikely(r != 0)) { + if (r == -ENOSPC && + started > started_before) + r = 0; + else r = -1; + break; } - } else + + ++started; + + if (unlikely(!virtqueue_kick(vq->vq))) { + r = -1; + break; + } + } + + if (started >= bufs) r = -1; /* Flush out completed bufs if any */ - if (virtqueue_get_buf(vq->vq, &len)) { + while (virtqueue_get_buf(vq->vq, &len)) { ++completed; r = 0; } } while (r == 0); - if (completed == completed_before) + if (completed == completed_before && started == started_before) ++spurious; assert(completed <= bufs); assert(started <= bufs); @@ -244,6 +259,11 @@ const struct option longopts[] = { .name = "no-delayed-interrupt", .val = 'd', }, + { + .name = "batch", + .val = 'b', + .has_arg = required_argument, + }, { } }; @@ -255,6 +275,7 @@ static void help(void) " [--no-event-idx]" " [--no-virtio-1]" " [--delayed-interrupt]" + " [--batch=N]" "\n"); } @@ -263,6 +284,7 @@ int main(int argc, char **argv) struct vdev_info dev; unsigned long long features = (1ULL << VIRTIO_RING_F_INDIRECT_DESC) | (1ULL << VIRTIO_RING_F_EVENT_IDX) | (1ULL << VIRTIO_F_VERSION_1); + long batch = 1; int o; bool delayed = false; @@ -289,6 +311,11 @@ int main(int argc, char **argv) case 'D': delayed = true; break; + case 'b': + batch = strtol(optarg, NULL, 10); + assert(batch > 0); + assert(batch < (long)INT_MAX + 1); + break; default: assert(0); break; @@ -298,6 +325,6 @@ int main(int argc, char **argv) done: vdev_info_init(&dev, features); vq_info_add(&dev, 256); - run_test(&dev, &dev.vqs[0], delayed, 0x100000); + run_test(&dev, &dev.vqs[0], delayed, batch, 0x100000); return 0; } From 7add78b2a6b76d98fcf35e981c5f84b3c91459f5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Eugenio=20P=C3=A9rez?= Date: Sat, 18 Apr 2020 12:22:12 +0200 Subject: [PATCH 291/618] tools/virtio: Add --batch=random option MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit So we can test with non-deterministic batches in flight. Signed-off-by: Eugenio Pérez Link: https://lore.kernel.org/r/20200418102217.32327-4-eperezma@redhat.com Signed-off-by: Michael S. Tsirkin --- tools/virtio/virtio_test.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/tools/virtio/virtio_test.c b/tools/virtio/virtio_test.c index c30de9088f3c..4a2b9d11f287 100644 --- a/tools/virtio/virtio_test.c +++ b/tools/virtio/virtio_test.c @@ -19,6 +19,8 @@ #include #include "../../drivers/vhost/test.h" +#define RANDOM_BATCH -1 + /* Unused */ void *__kmalloc_fake, *__kfree_ignore_start, *__kfree_ignore_end; @@ -161,6 +163,7 @@ static void run_test(struct vdev_info *dev, struct vq_info *vq, int r, test = 1; unsigned len; long long spurious = 0; + const bool random_batch = batch == RANDOM_BATCH; r = ioctl(dev->control, VHOST_TEST_RUN, &test); assert(r >= 0); for (;;) { @@ -168,6 +171,9 @@ static void run_test(struct vdev_info *dev, struct vq_info *vq, completed_before = completed; started_before = started; do { + if (random_batch) + batch = (random() % vq->vring.num) + 1; + while (started < bufs && (started - completed) < batch) { sg_init_one(&sl, dev->buf, dev->buf_size); @@ -275,7 +281,7 @@ static void help(void) " [--no-event-idx]" " [--no-virtio-1]" " [--delayed-interrupt]" - " [--batch=N]" + " [--batch=random/N]" "\n"); } @@ -312,9 +318,13 @@ int main(int argc, char **argv) delayed = true; break; case 'b': - batch = strtol(optarg, NULL, 10); - assert(batch > 0); - assert(batch < (long)INT_MAX + 1); + if (0 == strcmp(optarg, "random")) { + batch = RANDOM_BATCH; + } else { + batch = strtol(optarg, NULL, 10); + assert(batch > 0); + assert(batch < (long)INT_MAX + 1); + } break; default: assert(0); From 264ee5aa81ec87eebfb0e2fb70cc0a38df80bab2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Eugenio=20P=C3=A9rez?= Date: Sat, 18 Apr 2020 12:22:13 +0200 Subject: [PATCH 292/618] tools/virtio: Add --reset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently, it only removes and add backend, but it will reset vq position in future commits. Signed-off-by: Eugenio Pérez Link: https://lore.kernel.org/r/20200418102217.32327-5-eperezma@redhat.com Signed-off-by: Michael S. Tsirkin --- drivers/vhost/test.c | 57 ++++++++++++++++++++++++++++++++++++++ drivers/vhost/test.h | 1 + tools/virtio/virtio_test.c | 41 ++++++++++++++++++++++++--- 3 files changed, 95 insertions(+), 4 deletions(-) diff --git a/drivers/vhost/test.c b/drivers/vhost/test.c index 0466921f4772..a09dedc79f68 100644 --- a/drivers/vhost/test.c +++ b/drivers/vhost/test.c @@ -263,9 +263,62 @@ static int vhost_test_set_features(struct vhost_test *n, u64 features) return 0; } +static long vhost_test_set_backend(struct vhost_test *n, unsigned index, int fd) +{ + static void *backend; + + const bool enable = fd != -1; + struct vhost_virtqueue *vq; + int r; + + mutex_lock(&n->dev.mutex); + r = vhost_dev_check_owner(&n->dev); + if (r) + goto err; + + if (index >= VHOST_TEST_VQ_MAX) { + r = -ENOBUFS; + goto err; + } + vq = &n->vqs[index]; + mutex_lock(&vq->mutex); + + /* Verify that ring has been setup correctly. */ + if (!vhost_vq_access_ok(vq)) { + r = -EFAULT; + goto err_vq; + } + if (!enable) { + vhost_poll_stop(&vq->poll); + backend = vhost_vq_get_backend(vq); + vhost_vq_set_backend(vq, NULL); + } else { + vhost_vq_set_backend(vq, backend); + r = vhost_vq_init_access(vq); + if (r == 0) + r = vhost_poll_start(&vq->poll, vq->kick); + } + + mutex_unlock(&vq->mutex); + + if (enable) { + vhost_test_flush_vq(n, index); + } + + mutex_unlock(&n->dev.mutex); + return 0; + +err_vq: + mutex_unlock(&vq->mutex); +err: + mutex_unlock(&n->dev.mutex); + return r; +} + static long vhost_test_ioctl(struct file *f, unsigned int ioctl, unsigned long arg) { + struct vhost_vring_file backend; struct vhost_test *n = f->private_data; void __user *argp = (void __user *)arg; u64 __user *featurep = argp; @@ -277,6 +330,10 @@ static long vhost_test_ioctl(struct file *f, unsigned int ioctl, if (copy_from_user(&test, argp, sizeof test)) return -EFAULT; return vhost_test_run(n, test); + case VHOST_TEST_SET_BACKEND: + if (copy_from_user(&backend, argp, sizeof backend)) + return -EFAULT; + return vhost_test_set_backend(n, backend.index, backend.fd); case VHOST_GET_FEATURES: features = VHOST_FEATURES; if (copy_to_user(featurep, &features, sizeof features)) diff --git a/drivers/vhost/test.h b/drivers/vhost/test.h index 7dd265bfdf81..822bc4bee03a 100644 --- a/drivers/vhost/test.h +++ b/drivers/vhost/test.h @@ -4,5 +4,6 @@ /* Start a given test on the virtio null device. 0 stops all tests. */ #define VHOST_TEST_RUN _IOW(VHOST_VIRTIO, 0x31, int) +#define VHOST_TEST_SET_BACKEND _IOW(VHOST_VIRTIO, 0x32, int) #endif diff --git a/tools/virtio/virtio_test.c b/tools/virtio/virtio_test.c index 4a2b9d11f287..6bc3e172cc9b 100644 --- a/tools/virtio/virtio_test.c +++ b/tools/virtio/virtio_test.c @@ -46,6 +46,9 @@ struct vdev_info { struct vhost_memory *mem; }; +static const struct vhost_vring_file no_backend = { .fd = -1 }, + backend = { .fd = 1 }; + bool vq_notify(struct virtqueue *vq) { struct vq_info *info = vq->priv; @@ -155,10 +158,10 @@ static void wait_for_interrupt(struct vdev_info *dev) } static void run_test(struct vdev_info *dev, struct vq_info *vq, - bool delayed, int batch, int bufs) + bool delayed, int batch, int reset_n, int bufs) { struct scatterlist sl; - long started = 0, completed = 0; + long started = 0, completed = 0, next_reset = reset_n; long completed_before, started_before; int r, test = 1; unsigned len; @@ -171,6 +174,7 @@ static void run_test(struct vdev_info *dev, struct vq_info *vq, completed_before = completed; started_before = started; do { + const bool reset = reset_n && completed > next_reset; if (random_batch) batch = (random() % vq->vring.num) + 1; @@ -200,12 +204,26 @@ static void run_test(struct vdev_info *dev, struct vq_info *vq, if (started >= bufs) r = -1; + if (reset) { + r = ioctl(dev->control, VHOST_TEST_SET_BACKEND, + &no_backend); + assert(!r); + } + /* Flush out completed bufs if any */ while (virtqueue_get_buf(vq->vq, &len)) { ++completed; r = 0; } + if (reset) { + r = ioctl(dev->control, VHOST_TEST_SET_BACKEND, + &backend); + assert(!r); + + while (completed > next_reset) + next_reset += completed; + } } while (r == 0); if (completed == completed_before && started == started_before) ++spurious; @@ -270,6 +288,11 @@ const struct option longopts[] = { .val = 'b', .has_arg = required_argument, }, + { + .name = "reset", + .val = 'r', + .has_arg = optional_argument, + }, { } }; @@ -282,6 +305,7 @@ static void help(void) " [--no-virtio-1]" " [--delayed-interrupt]" " [--batch=random/N]" + " [--reset=N]" "\n"); } @@ -290,7 +314,7 @@ int main(int argc, char **argv) struct vdev_info dev; unsigned long long features = (1ULL << VIRTIO_RING_F_INDIRECT_DESC) | (1ULL << VIRTIO_RING_F_EVENT_IDX) | (1ULL << VIRTIO_F_VERSION_1); - long batch = 1; + long batch = 1, reset = 0; int o; bool delayed = false; @@ -326,6 +350,15 @@ int main(int argc, char **argv) assert(batch < (long)INT_MAX + 1); } break; + case 'r': + if (!optarg) { + reset = 1; + } else { + reset = strtol(optarg, NULL, 10); + assert(reset > 0); + assert(reset < (long)INT_MAX + 1); + } + break; default: assert(0); break; @@ -335,6 +368,6 @@ int main(int argc, char **argv) done: vdev_info_init(&dev, features); vq_info_add(&dev, 256); - run_test(&dev, &dev.vqs[0], delayed, batch, 0x100000); + run_test(&dev, &dev.vqs[0], delayed, batch, reset, 0x100000); return 0; } From 4cfb93935337d8f9680d865b0987583e462cfcc7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Eugenio=20P=C3=A9rez?= Date: Sat, 18 Apr 2020 12:22:14 +0200 Subject: [PATCH 293/618] tools/virtio: Use __vring_new_virtqueue in virtio_test.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As updated in ("2a2d1382fe9d virtio: Add improved queue allocation API") Signed-off-by: Eugenio Pérez Link: https://lore.kernel.org/r/20200418102217.32327-6-eperezma@redhat.com Signed-off-by: Michael S. Tsirkin --- tools/virtio/virtio_test.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/tools/virtio/virtio_test.c b/tools/virtio/virtio_test.c index 6bc3e172cc9b..0a247ba3b899 100644 --- a/tools/virtio/virtio_test.c +++ b/tools/virtio/virtio_test.c @@ -105,10 +105,9 @@ static void vq_info_add(struct vdev_info *dev, int num) assert(r >= 0); memset(info->ring, 0, vring_size(num, 4096)); vring_init(&info->vring, num, info->ring, 4096); - info->vq = vring_new_virtqueue(info->idx, - info->vring.num, 4096, &dev->vdev, - true, false, info->ring, - vq_notify, vq_callback, "test"); + info->vq = + __vring_new_virtqueue(info->idx, info->vring, &dev->vdev, true, + false, vq_notify, vq_callback, "test"); assert(info->vq); info->vq->priv = info; vhost_vq_setup(dev, info); From 6741239260293e46a32a141fb61bf2c062b0b6ed Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Eugenio=20P=C3=A9rez?= Date: Sat, 18 Apr 2020 12:22:15 +0200 Subject: [PATCH 294/618] tools/virtio: Extract virtqueue initialization in vq_reset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit So we can reset after that in the main loop. Signed-off-by: Eugenio Pérez Link: https://lore.kernel.org/r/20200418102217.32327-7-eperezma@redhat.com Signed-off-by: Michael S. Tsirkin --- tools/virtio/virtio_test.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/tools/virtio/virtio_test.c b/tools/virtio/virtio_test.c index 0a247ba3b899..bc16c818bda3 100644 --- a/tools/virtio/virtio_test.c +++ b/tools/virtio/virtio_test.c @@ -94,6 +94,19 @@ void vhost_vq_setup(struct vdev_info *dev, struct vq_info *info) assert(r >= 0); } +static void vq_reset(struct vq_info *info, int num, struct virtio_device *vdev) +{ + if (info->vq) + vring_del_virtqueue(info->vq); + + memset(info->ring, 0, vring_size(num, 4096)); + vring_init(&info->vring, num, info->ring, 4096); + info->vq = __vring_new_virtqueue(info->idx, info->vring, vdev, true, + false, vq_notify, vq_callback, "test"); + assert(info->vq); + info->vq->priv = info; +} + static void vq_info_add(struct vdev_info *dev, int num) { struct vq_info *info = &dev->vqs[dev->nvqs]; @@ -103,13 +116,7 @@ static void vq_info_add(struct vdev_info *dev, int num) info->call = eventfd(0, EFD_NONBLOCK); r = posix_memalign(&info->ring, 4096, vring_size(num, 4096)); assert(r >= 0); - memset(info->ring, 0, vring_size(num, 4096)); - vring_init(&info->vring, num, info->ring, 4096); - info->vq = - __vring_new_virtqueue(info->idx, info->vring, &dev->vdev, true, - false, vq_notify, vq_callback, "test"); - assert(info->vq); - info->vq->priv = info; + vq_reset(info, num, &dev->vdev); vhost_vq_setup(dev, info); dev->fds[info->idx].fd = info->call; dev->fds[info->idx].events = POLLIN; From 1d8bf5c3a3a1b90c39ccbafb3aa63ffc5196b142 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Eugenio=20P=C3=A9rez?= Date: Sat, 18 Apr 2020 12:22:16 +0200 Subject: [PATCH 295/618] tools/virtio: Reset index in virtio_test --reset. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This way behavior for vhost is more like a VM. Signed-off-by: Eugenio Pérez Link: https://lore.kernel.org/r/20200418102217.32327-8-eperezma@redhat.com Signed-off-by: Michael S. Tsirkin --- tools/virtio/virtio_test.c | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-) diff --git a/tools/virtio/virtio_test.c b/tools/virtio/virtio_test.c index bc16c818bda3..82902fc3ba2a 100644 --- a/tools/virtio/virtio_test.c +++ b/tools/virtio/virtio_test.c @@ -48,6 +48,7 @@ struct vdev_info { static const struct vhost_vring_file no_backend = { .fd = -1 }, backend = { .fd = 1 }; +static const struct vhost_vring_state null_state = {}; bool vq_notify(struct virtqueue *vq) { @@ -173,14 +174,19 @@ static void run_test(struct vdev_info *dev, struct vq_info *vq, unsigned len; long long spurious = 0; const bool random_batch = batch == RANDOM_BATCH; + r = ioctl(dev->control, VHOST_TEST_RUN, &test); assert(r >= 0); + if (!reset_n) { + next_reset = INT_MAX; + } + for (;;) { virtqueue_disable_cb(vq->vq); completed_before = completed; started_before = started; do { - const bool reset = reset_n && completed > next_reset; + const bool reset = completed > next_reset; if (random_batch) batch = (random() % vq->vring.num) + 1; @@ -223,10 +229,24 @@ static void run_test(struct vdev_info *dev, struct vq_info *vq, } if (reset) { + struct vhost_vring_state s = { .index = 0 }; + + vq_reset(vq, vq->vring.num, &dev->vdev); + + r = ioctl(dev->control, VHOST_GET_VRING_BASE, + &s); + assert(!r); + + s.num = 0; + r = ioctl(dev->control, VHOST_SET_VRING_BASE, + &null_state); + assert(!r); + r = ioctl(dev->control, VHOST_TEST_SET_BACKEND, &backend); assert(!r); + started = completed; while (completed > next_reset) next_reset += completed; } @@ -248,7 +268,9 @@ static void run_test(struct vdev_info *dev, struct vq_info *vq, test = 0; r = ioctl(dev->control, VHOST_TEST_RUN, &test); assert(r >= 0); - fprintf(stderr, "spurious wakeups: 0x%llx\n", spurious); + fprintf(stderr, + "spurious wakeups: 0x%llx started=0x%lx completed=0x%lx\n", + spurious, started, completed); } const char optstring[] = "h"; From cb91909e48a4809261ef4e967464e2009b214f06 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Eugenio=20P=C3=A9rez?= Date: Sat, 18 Apr 2020 12:22:17 +0200 Subject: [PATCH 296/618] tools/virtio: Use tools/include/list.h instead of stubs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It should not make any significant difference but reduce stub code. Signed-off-by: Eugenio Pérez Link: https://lore.kernel.org/r/20200418102217.32327-9-eperezma@redhat.com Signed-off-by: Michael S. Tsirkin --- tools/virtio/linux/kernel.h | 7 +------ tools/virtio/linux/virtio.h | 5 ++--- tools/virtio/virtio_test.c | 1 + tools/virtio/vringh_test.c | 2 ++ 4 files changed, 6 insertions(+), 9 deletions(-) diff --git a/tools/virtio/linux/kernel.h b/tools/virtio/linux/kernel.h index 6683b4a70b05..caab980211a6 100644 --- a/tools/virtio/linux/kernel.h +++ b/tools/virtio/linux/kernel.h @@ -11,6 +11,7 @@ #include #include +#include #include #include #include @@ -135,10 +136,4 @@ static inline void free_page(unsigned long addr) (void) (&_min1 == &_min2); \ _min1 < _min2 ? _min1 : _min2; }) -/* TODO: empty stubs for now. Broken but enough for virtio_ring.c */ -#define list_add_tail(a, b) do {} while (0) -#define list_del(a) do {} while (0) -#define list_for_each_entry(a, b, c) while (0) -/* end of stubs */ - #endif /* KERNEL_H */ diff --git a/tools/virtio/linux/virtio.h b/tools/virtio/linux/virtio.h index b751350d4ce8..5d90254ddae4 100644 --- a/tools/virtio/linux/virtio.h +++ b/tools/virtio/linux/virtio.h @@ -11,12 +11,11 @@ struct device { struct virtio_device { struct device dev; u64 features; + struct list_head vqs; }; struct virtqueue { - /* TODO: commented as list macros are empty stubs for now. - * Broken but enough for virtio_ring.c - * struct list_head list; */ + struct list_head list; void (*callback)(struct virtqueue *vq); const char *name; struct virtio_device *vdev; diff --git a/tools/virtio/virtio_test.c b/tools/virtio/virtio_test.c index 82902fc3ba2a..cb3f29c09aff 100644 --- a/tools/virtio/virtio_test.c +++ b/tools/virtio/virtio_test.c @@ -129,6 +129,7 @@ static void vdev_info_init(struct vdev_info* dev, unsigned long long features) int r; memset(dev, 0, sizeof *dev); dev->vdev.features = features; + INIT_LIST_HEAD(&dev->vdev.vqs); dev->buf_size = 1024; dev->buf = malloc(dev->buf_size); assert(dev->buf); diff --git a/tools/virtio/vringh_test.c b/tools/virtio/vringh_test.c index 293653463303..fa87b58bd5fa 100644 --- a/tools/virtio/vringh_test.c +++ b/tools/virtio/vringh_test.c @@ -307,6 +307,7 @@ static int parallel_test(u64 features, close(to_host[0]); gvdev.vdev.features = features; + INIT_LIST_HEAD(&gvdev.vdev.vqs); gvdev.to_host_fd = to_host[1]; gvdev.notifies = 0; @@ -453,6 +454,7 @@ int main(int argc, char *argv[]) getrange = getrange_iov; vdev.features = 0; + INIT_LIST_HEAD(&vdev.vqs); while (argv[1]) { if (strcmp(argv[1], "--indirect") == 0) From af28dfacbe00d53df5dec2bf50640df33138b1fe Mon Sep 17 00:00:00 2001 From: Igor Mammedov Date: Mon, 22 Jun 2020 12:08:30 -0400 Subject: [PATCH 297/618] kvm: lapic: fix broken vcpu hotplug Guest fails to online hotplugged CPU with error smpboot: do_boot_cpu failed(-1) to wakeup CPU#4 It's caused by the fact that kvm_apic_set_state(), which used to call recalculate_apic_map() unconditionally and pulled hotplugged CPU into apic map, is updating map conditionally on state changes. In this case the APIC map is not considered dirty and the is not updated. Fix the issue by forcing unconditional update from kvm_apic_set_state(), like it used to be. Fixes: 4abaffce4d25a ("KVM: LAPIC: Recalculate apic map in batch") Cc: stable@vger.kernel.org Signed-off-by: Igor Mammedov Message-Id: <20200622160830.426022-1-imammedo@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/lapic.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 34a7e0533dad..6dc177da19da 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -2567,6 +2567,7 @@ int kvm_apic_set_state(struct kvm_vcpu *vcpu, struct kvm_lapic_state *s) } memcpy(vcpu->arch.apic->regs, s->regs, sizeof(*s)); + apic->vcpu->kvm->arch.apic_map_dirty = true; kvm_recalculate_apic_map(vcpu->kvm); kvm_apic_set_version(vcpu); From 4bc799dcb67066e0531004d5bdbe755bb02b5488 Mon Sep 17 00:00:00 2001 From: Sami Tolvanen Date: Mon, 15 Jun 2020 11:12:32 -0700 Subject: [PATCH 298/618] security: fix the key_permission LSM hook function type Commit 8c0637e950d6 ("keys: Make the KEY_NEED_* perms an enum rather than a mask") changed the type of the key_permission callback functions, but didn't change the type of the hook, which trips indirect call checking with Control-Flow Integrity (CFI). This change fixes the issue by changing the hook type to match the functions. Fixes: 8c0637e950d6 ("keys: Make the KEY_NEED_* perms an enum rather than a mask") Signed-off-by: Sami Tolvanen Acked-by: Kees Cook Signed-off-by: James Morris --- include/linux/lsm_hook_defs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/lsm_hook_defs.h b/include/linux/lsm_hook_defs.h index 6791813cd439..24f6683f1cfc 100644 --- a/include/linux/lsm_hook_defs.h +++ b/include/linux/lsm_hook_defs.h @@ -360,7 +360,7 @@ LSM_HOOK(int, 0, key_alloc, struct key *key, const struct cred *cred, unsigned long flags) LSM_HOOK(void, LSM_RET_VOID, key_free, struct key *key) LSM_HOOK(int, 0, key_permission, key_ref_t key_ref, const struct cred *cred, - unsigned perm) + enum key_need_perm need_perm) LSM_HOOK(int, 0, key_getsecurity, struct key *key, char **_buffer) #endif /* CONFIG_KEYS */ From c1d869d64a1955817c4d6fff08ecbbe8e59d36f8 Mon Sep 17 00:00:00 2001 From: Mark Zhang Date: Sun, 21 Jun 2020 14:00:00 +0300 Subject: [PATCH 299/618] RDMA/counter: Query a counter before release Query a dynamically-allocated counter before release it, to update it's hwcounters and log all of them into history data. Otherwise all values of these hwcounters will be lost. Fixes: f34a55e497e8 ("RDMA/core: Get sum value of all counters when perform a sysfs stat read") Link: https://lore.kernel.org/r/20200621110000.56059-1-leon@kernel.org Signed-off-by: Mark Zhang Reviewed-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/counters.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/core/counters.c b/drivers/infiniband/core/counters.c index 2257d7f7810f..738d1faf4bba 100644 --- a/drivers/infiniband/core/counters.c +++ b/drivers/infiniband/core/counters.c @@ -202,7 +202,7 @@ static int __rdma_counter_unbind_qp(struct ib_qp *qp) return ret; } -static void counter_history_stat_update(const struct rdma_counter *counter) +static void counter_history_stat_update(struct rdma_counter *counter) { struct ib_device *dev = counter->device; struct rdma_port_counter *port_counter; @@ -212,6 +212,8 @@ static void counter_history_stat_update(const struct rdma_counter *counter) if (!port_counter->hstats) return; + rdma_counter_query_stats(counter); + for (i = 0; i < counter->stats->num_counters; i++) port_counter->hstats->value[i] += counter->stats->value[i]; } From 44d527170731c75587e95052f3eea72b8c651daf Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Mon, 22 Jun 2020 16:37:42 +0200 Subject: [PATCH 300/618] KVM: LAPIC: ensure APIC map is up to date on concurrent update requests The following race can cause lost map update events: cpu1 cpu2 apic_map_dirty = true ------------------------------------------------------------ kvm_recalculate_apic_map: pass check mutex_lock(&kvm->arch.apic_map_lock); if (!kvm->arch.apic_map_dirty) and in process of updating map ------------------------------------------------------------- other calls to apic_map_dirty = true might be too late for affected cpu ------------------------------------------------------------- apic_map_dirty = false ------------------------------------------------------------- kvm_recalculate_apic_map: bail out on if (!kvm->arch.apic_map_dirty) To fix it, record the beginning of an update of the APIC map in apic_map_dirty. If another APIC map change switches apic_map_dirty back to DIRTY during the update, kvm_recalculate_apic_map should not make it CLEAN, and the other caller will go through the slow path. Reported-by: Igor Mammedov Signed-off-by: Paolo Bonzini --- arch/x86/include/asm/kvm_host.h | 2 +- arch/x86/kvm/lapic.c | 51 ++++++++++++++++++++------------- 2 files changed, 32 insertions(+), 21 deletions(-) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index f8998e97457f..f852ee350beb 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -943,7 +943,7 @@ struct kvm_arch { atomic_t vapics_in_nmi_mode; struct mutex apic_map_lock; struct kvm_apic_map *apic_map; - bool apic_map_dirty; + atomic_t apic_map_dirty; bool apic_access_page_done; unsigned long apicv_inhibit_reasons; diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 6dc177da19da..5bf72fc86a8e 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -169,6 +169,18 @@ static void kvm_apic_map_free(struct rcu_head *rcu) kvfree(map); } +/* + * CLEAN -> DIRTY and UPDATE_IN_PROGRESS -> DIRTY changes happen without a lock. + * + * DIRTY -> UPDATE_IN_PROGRESS and UPDATE_IN_PROGRESS -> CLEAN happen with + * apic_map_lock_held. + */ +enum { + CLEAN, + UPDATE_IN_PROGRESS, + DIRTY +}; + void kvm_recalculate_apic_map(struct kvm *kvm) { struct kvm_apic_map *new, *old = NULL; @@ -176,17 +188,17 @@ void kvm_recalculate_apic_map(struct kvm *kvm) int i; u32 max_id = 255; /* enough space for any xAPIC ID */ - if (!kvm->arch.apic_map_dirty) { - /* - * Read kvm->arch.apic_map_dirty before - * kvm->arch.apic_map - */ - smp_rmb(); + /* Read kvm->arch.apic_map_dirty before kvm->arch.apic_map. */ + if (atomic_read_acquire(&kvm->arch.apic_map_dirty) == CLEAN) return; - } mutex_lock(&kvm->arch.apic_map_lock); - if (!kvm->arch.apic_map_dirty) { + /* + * Read kvm->arch.apic_map_dirty before kvm->arch.apic_map + * (if clean) or the APIC registers (if dirty). + */ + if (atomic_cmpxchg_acquire(&kvm->arch.apic_map_dirty, + DIRTY, UPDATE_IN_PROGRESS) == CLEAN) { /* Someone else has updated the map. */ mutex_unlock(&kvm->arch.apic_map_lock); return; @@ -256,11 +268,11 @@ void kvm_recalculate_apic_map(struct kvm *kvm) lockdep_is_held(&kvm->arch.apic_map_lock)); rcu_assign_pointer(kvm->arch.apic_map, new); /* - * Write kvm->arch.apic_map before - * clearing apic->apic_map_dirty + * Write kvm->arch.apic_map before clearing apic->apic_map_dirty. + * If another update has come in, leave it DIRTY. */ - smp_wmb(); - kvm->arch.apic_map_dirty = false; + atomic_cmpxchg_release(&kvm->arch.apic_map_dirty, + UPDATE_IN_PROGRESS, CLEAN); mutex_unlock(&kvm->arch.apic_map_lock); if (old) @@ -282,20 +294,20 @@ static inline void apic_set_spiv(struct kvm_lapic *apic, u32 val) else static_key_slow_inc(&apic_sw_disabled.key); - apic->vcpu->kvm->arch.apic_map_dirty = true; + atomic_set_release(&apic->vcpu->kvm->arch.apic_map_dirty, DIRTY); } } static inline void kvm_apic_set_xapic_id(struct kvm_lapic *apic, u8 id) { kvm_lapic_set_reg(apic, APIC_ID, id << 24); - apic->vcpu->kvm->arch.apic_map_dirty = true; + atomic_set_release(&apic->vcpu->kvm->arch.apic_map_dirty, DIRTY); } static inline void kvm_apic_set_ldr(struct kvm_lapic *apic, u32 id) { kvm_lapic_set_reg(apic, APIC_LDR, id); - apic->vcpu->kvm->arch.apic_map_dirty = true; + atomic_set_release(&apic->vcpu->kvm->arch.apic_map_dirty, DIRTY); } static inline u32 kvm_apic_calc_x2apic_ldr(u32 id) @@ -311,7 +323,7 @@ static inline void kvm_apic_set_x2apic_id(struct kvm_lapic *apic, u32 id) kvm_lapic_set_reg(apic, APIC_ID, id); kvm_lapic_set_reg(apic, APIC_LDR, ldr); - apic->vcpu->kvm->arch.apic_map_dirty = true; + atomic_set_release(&apic->vcpu->kvm->arch.apic_map_dirty, DIRTY); } static inline int apic_lvt_enabled(struct kvm_lapic *apic, int lvt_type) @@ -1976,7 +1988,7 @@ int kvm_lapic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val) case APIC_DFR: if (!apic_x2apic_mode(apic)) { kvm_lapic_set_reg(apic, APIC_DFR, val | 0x0FFFFFFF); - apic->vcpu->kvm->arch.apic_map_dirty = true; + atomic_set_release(&apic->vcpu->kvm->arch.apic_map_dirty, DIRTY); } else ret = 1; break; @@ -2232,7 +2244,7 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value) static_key_slow_dec_deferred(&apic_hw_disabled); } else { static_key_slow_inc(&apic_hw_disabled.key); - vcpu->kvm->arch.apic_map_dirty = true; + atomic_set_release(&apic->vcpu->kvm->arch.apic_map_dirty, DIRTY); } } @@ -2273,7 +2285,6 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event) if (!apic) return; - vcpu->kvm->arch.apic_map_dirty = false; /* Stop the timer in case it's a reset to an active apic */ hrtimer_cancel(&apic->lapic_timer.timer); @@ -2567,7 +2578,7 @@ int kvm_apic_set_state(struct kvm_vcpu *vcpu, struct kvm_lapic_state *s) } memcpy(vcpu->arch.apic->regs, s->regs, sizeof(*s)); - apic->vcpu->kvm->arch.apic_map_dirty = true; + atomic_set_release(&apic->vcpu->kvm->arch.apic_map_dirty, DIRTY); kvm_recalculate_apic_map(vcpu->kvm); kvm_apic_set_version(vcpu); From 312d16c7c06174f44f96ef4a61c2936e6e360414 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Mon, 22 Jun 2020 17:14:35 +0200 Subject: [PATCH 301/618] KVM: x86/mmu: Avoid mixing gpa_t with gfn_t in walk_addr_generic() translate_gpa() returns a GPA, assigning it to 'real_gfn' seems obviously wrong. There is no real issue because both 'gpa_t' and 'gfn_t' are u64 and we don't use the value in 'real_gfn' as a GFN, we do real_gfn = gpa_to_gfn(real_gfn); instead. 'If you see a "buffalo" sign on an elephant's cage, do not trust your eyes', but let's fix it for good. No functional change intended. Signed-off-by: Vitaly Kuznetsov Message-Id: <20200622151435.752560-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/mmu/paging_tmpl.h | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/arch/x86/kvm/mmu/paging_tmpl.h b/arch/x86/kvm/mmu/paging_tmpl.h index a6d484ea110b..58234bfaca07 100644 --- a/arch/x86/kvm/mmu/paging_tmpl.h +++ b/arch/x86/kvm/mmu/paging_tmpl.h @@ -360,7 +360,6 @@ static int FNAME(walk_addr_generic)(struct guest_walker *walker, ++walker->level; do { - gfn_t real_gfn; unsigned long host_addr; pt_access = pte_access; @@ -375,7 +374,7 @@ static int FNAME(walk_addr_generic)(struct guest_walker *walker, walker->table_gfn[walker->level - 1] = table_gfn; walker->pte_gpa[walker->level - 1] = pte_gpa; - real_gfn = mmu->translate_gpa(vcpu, gfn_to_gpa(table_gfn), + real_gpa = mmu->translate_gpa(vcpu, gfn_to_gpa(table_gfn), nested_access, &walker->fault); @@ -389,12 +388,10 @@ static int FNAME(walk_addr_generic)(struct guest_walker *walker, * information to fix the exit_qualification or exit_info_1 * fields. */ - if (unlikely(real_gfn == UNMAPPED_GVA)) + if (unlikely(real_gpa == UNMAPPED_GVA)) return 0; - real_gfn = gpa_to_gfn(real_gfn); - - host_addr = kvm_vcpu_gfn_to_hva_prot(vcpu, real_gfn, + host_addr = kvm_vcpu_gfn_to_hva_prot(vcpu, gpa_to_gfn(real_gpa), &walker->pte_writable[walker->level - 1]); if (unlikely(kvm_is_error_hva(host_addr))) goto error; From 6eefa839c4dddf2149e9f5f6f1aa3e1191c8db9c Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Sun, 21 Jun 2020 14:59:59 +0300 Subject: [PATCH 302/618] RDMA/mlx5: Protect from kernel crash if XRC_TGT doesn't have udata Don't deref udata if it is NULL BUG: kernel NULL pointer dereference, address: 0000000000000030 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 SMP PTI CPU: 2 PID: 1592 Comm: python3 Not tainted 5.7.0-rc6+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:create_qp+0x39e/0xae0 [mlx5_ib] Code: c0 0d 00 00 bf 10 01 00 00 e8 be a9 e4 e0 48 85 c0 49 89 c2 0f 84 0c 07 00 00 41 8b 85 74 63 01 00 0f c8 a9 00 00 00 10 74 0a <41> 8b 46 30 0f c8 41 89 42 14 41 8b 52 18 41 0f b6 4a 1c 0f ca 89 RSP: 0018:ffffc9000067f8b0 EFLAGS: 00010206 RAX: 0000000010170000 RBX: ffff888441313000 RCX: 0000000000000000 RDX: 0000000000000200 RSI: 0000000000000000 RDI: ffff88845b1d4400 RBP: ffffc9000067fa60 R08: 0000000000000200 R09: ffff88845b1d4200 R10: ffff88845b1d4200 R11: ffff888441313000 R12: ffffc9000067f950 R13: ffff88846ac00140 R14: 0000000000000000 R15: ffff88846c2bc000 FS: 00007faa1a3c0540(0000) GS:ffff88846fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000446dca003 CR4: 0000000000760ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 mlx5_ib_create_qp+0x897/0xfa0 [mlx5_ib] ib_create_qp+0x9e/0x300 [ib_core] create_qp+0x92d/0xb20 [ib_uverbs] ? ib_uverbs_cq_event_handler+0x30/0x30 [ib_uverbs] ? release_resource+0x30/0x30 ib_uverbs_create_qp+0xc4/0xe0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xc8/0xf0 [ib_uverbs] ib_uverbs_run_method+0x223/0x770 [ib_uverbs] ? track_pfn_remap+0xa7/0x100 ? uverbs_disassociate_api+0xd0/0xd0 [ib_uverbs] ? remap_pfn_range+0x358/0x490 ib_uverbs_cmd_verbs.isra.6+0x19b/0x370 [ib_uverbs] ? rdma_umap_priv_init+0x82/0xe0 [ib_core] ? vm_mmap_pgoff+0xec/0x120 ib_uverbs_ioctl+0xc0/0x120 [ib_uverbs] ksys_ioctl+0x92/0xb0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x48/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: e383085c2425 ("RDMA/mlx5: Set ECE options during QP create") Link: https://lore.kernel.org/r/20200621115959.60126-1-leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/qp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index a7fcb00e37a5..f939c9b769f0 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -1862,7 +1862,7 @@ static int create_xrc_tgt_qp(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp, if (!in) return -ENOMEM; - if (MLX5_CAP_GEN(mdev, ece_support)) + if (MLX5_CAP_GEN(mdev, ece_support) && ucmd) MLX5_SET(create_qp_in, in, ece, ucmd->ece_options); qpc = MLX5_ADDR_OF(create_qp_in, in, qpc); From 116a1b9f1cb769b83e5adff323f977a62b1dcb2e Mon Sep 17 00:00:00 2001 From: Shay Drory Date: Sun, 21 Jun 2020 13:47:35 +0300 Subject: [PATCH 303/618] IB/mad: Fix use after free when destroying MAD agent Currently, when RMPP MADs are processed while the MAD agent is destroyed, it could result in use after free of rmpp_recv, as decribed below: cpu-0 cpu-1 ----- ----- ib_mad_recv_done() ib_mad_complete_recv() ib_process_rmpp_recv_wc() unregister_mad_agent() ib_cancel_rmpp_recvs() cancel_delayed_work() process_rmpp_data() start_rmpp() queue_delayed_work(rmpp_recv->cleanup_work) destroy_rmpp_recv() free_rmpp_recv() cleanup_work()[1] spin_lock_irqsave(&rmpp_recv->agent->lock) <-- use after free [1] cleanup_work() == recv_cleanup_handler Fix it by waiting for the MAD agent reference count becoming zero before calling to ib_cancel_rmpp_recvs(). Fixes: 9a41e38a467c ("IB/mad: Use IDR for agent IDs") Link: https://lore.kernel.org/r/20200621104738.54850-2-leon@kernel.org Signed-off-by: Shay Drory Reviewed-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/mad.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index 5e080191a725..a09f8e3c7f3f 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -509,10 +509,10 @@ static void unregister_mad_agent(struct ib_mad_agent_private *mad_agent_priv) xa_erase(&ib_mad_clients, mad_agent_priv->agent.hi_tid); flush_workqueue(port_priv->wq); - ib_cancel_rmpp_recvs(mad_agent_priv); deref_mad_agent(mad_agent_priv); wait_for_completion(&mad_agent_priv->comp); + ib_cancel_rmpp_recvs(mad_agent_priv); ib_mad_agent_security_cleanup(&mad_agent_priv->agent); From b0c34bde72a59c05e826bf0a5aeca0d73f38f791 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 21 Jun 2020 17:06:30 +0200 Subject: [PATCH 304/618] MAINTAINERS: update email address for Felix Fietkau The old address has been bouncing for a while now Signed-off-by: Felix Fietkau Signed-off-by: David S. Miller --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index a09e61268c08..352904042a0d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10808,7 +10808,7 @@ F: Documentation/devicetree/bindings/dma/mtk-* F: drivers/dma/mediatek/ MEDIATEK ETHERNET DRIVER -M: Felix Fietkau +M: Felix Fietkau M: John Crispin M: Sean Wang M: Mark Lee From 2dbebf7ae1ed9a420d954305e2c9d5ed39ec57c3 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Mon, 22 Jun 2020 14:58:29 -0700 Subject: [PATCH 305/618] KVM: nVMX: Plumb L2 GPA through to PML emulation Explicitly pass the L2 GPA to kvm_arch_write_log_dirty(), which for all intents and purposes is vmx_write_pml_buffer(), instead of having the latter pull the GPA from vmcs.GUEST_PHYSICAL_ADDRESS. If the dirty bit update is the result of KVM emulation (rare for L2), then the GPA in the VMCS may be stale and/or hold a completely unrelated GPA. Fixes: c5f983f6e8455 ("nVMX: Implement emulated Page Modification Logging") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Message-Id: <20200622215832.22090-2-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini --- arch/x86/include/asm/kvm_host.h | 2 +- arch/x86/kvm/mmu.h | 2 +- arch/x86/kvm/mmu/mmu.c | 4 ++-- arch/x86/kvm/mmu/paging_tmpl.h | 7 ++++--- arch/x86/kvm/vmx/vmx.c | 6 +++--- 5 files changed, 11 insertions(+), 10 deletions(-) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index f852ee350beb..be5363b21540 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -1220,7 +1220,7 @@ struct kvm_x86_ops { void (*enable_log_dirty_pt_masked)(struct kvm *kvm, struct kvm_memory_slot *slot, gfn_t offset, unsigned long mask); - int (*write_log_dirty)(struct kvm_vcpu *vcpu); + int (*write_log_dirty)(struct kvm_vcpu *vcpu, gpa_t l2_gpa); /* pmu operations of sub-arch */ const struct kvm_pmu_ops *pmu_ops; diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h index 0ad06bfe2c2c..444bb9c54548 100644 --- a/arch/x86/kvm/mmu.h +++ b/arch/x86/kvm/mmu.h @@ -222,7 +222,7 @@ void kvm_mmu_gfn_disallow_lpage(struct kvm_memory_slot *slot, gfn_t gfn); void kvm_mmu_gfn_allow_lpage(struct kvm_memory_slot *slot, gfn_t gfn); bool kvm_mmu_slot_gfn_write_protect(struct kvm *kvm, struct kvm_memory_slot *slot, u64 gfn); -int kvm_arch_write_log_dirty(struct kvm_vcpu *vcpu); +int kvm_arch_write_log_dirty(struct kvm_vcpu *vcpu, gpa_t l2_gpa); int kvm_mmu_post_init_vm(struct kvm *kvm); void kvm_mmu_pre_destroy_vm(struct kvm *kvm); diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c index fdd05c233308..76817d13c86e 100644 --- a/arch/x86/kvm/mmu/mmu.c +++ b/arch/x86/kvm/mmu/mmu.c @@ -1745,10 +1745,10 @@ void kvm_arch_mmu_enable_log_dirty_pt_masked(struct kvm *kvm, * Emulate arch specific page modification logging for the * nested hypervisor */ -int kvm_arch_write_log_dirty(struct kvm_vcpu *vcpu) +int kvm_arch_write_log_dirty(struct kvm_vcpu *vcpu, gpa_t l2_gpa) { if (kvm_x86_ops.write_log_dirty) - return kvm_x86_ops.write_log_dirty(vcpu); + return kvm_x86_ops.write_log_dirty(vcpu, l2_gpa); return 0; } diff --git a/arch/x86/kvm/mmu/paging_tmpl.h b/arch/x86/kvm/mmu/paging_tmpl.h index 58234bfaca07..bd70ece1ef8b 100644 --- a/arch/x86/kvm/mmu/paging_tmpl.h +++ b/arch/x86/kvm/mmu/paging_tmpl.h @@ -235,7 +235,7 @@ static inline unsigned FNAME(gpte_access)(u64 gpte) static int FNAME(update_accessed_dirty_bits)(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu, struct guest_walker *walker, - int write_fault) + gpa_t addr, int write_fault) { unsigned level, index; pt_element_t pte, orig_pte; @@ -260,7 +260,7 @@ static int FNAME(update_accessed_dirty_bits)(struct kvm_vcpu *vcpu, !(pte & PT_GUEST_DIRTY_MASK)) { trace_kvm_mmu_set_dirty_bit(table_gfn, index, sizeof(pte)); #if PTTYPE == PTTYPE_EPT - if (kvm_arch_write_log_dirty(vcpu)) + if (kvm_arch_write_log_dirty(vcpu, addr)) return -EINVAL; #endif pte |= PT_GUEST_DIRTY_MASK; @@ -454,7 +454,8 @@ static int FNAME(walk_addr_generic)(struct guest_walker *walker, (PT_GUEST_DIRTY_SHIFT - PT_GUEST_ACCESSED_SHIFT); if (unlikely(!accessed_dirty)) { - ret = FNAME(update_accessed_dirty_bits)(vcpu, mmu, walker, write_fault); + ret = FNAME(update_accessed_dirty_bits)(vcpu, mmu, walker, + addr, write_fault); if (unlikely(ret < 0)) goto error; else if (ret) diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index b1a23ad986ff..ad0ac8bc85d9 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -7500,11 +7500,11 @@ static void vmx_flush_log_dirty(struct kvm *kvm) kvm_flush_pml_buffers(kvm); } -static int vmx_write_pml_buffer(struct kvm_vcpu *vcpu) +static int vmx_write_pml_buffer(struct kvm_vcpu *vcpu, gpa_t gpa) { struct vmcs12 *vmcs12; struct vcpu_vmx *vmx = to_vmx(vcpu); - gpa_t gpa, dst; + gpa_t dst; if (is_guest_mode(vcpu)) { WARN_ON_ONCE(vmx->nested.pml_full); @@ -7523,7 +7523,7 @@ static int vmx_write_pml_buffer(struct kvm_vcpu *vcpu) return 1; } - gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS) & ~0xFFFull; + gpa &= ~0xFFFull; dst = vmcs12->pml_address + sizeof(u64) * vmcs12->guest_pml_index; if (kvm_write_guest_page(vcpu->kvm, gpa_to_gfn(dst), &gpa, From 6d61f483f148b856d47a6c96d5d84054d5a9f849 Mon Sep 17 00:00:00 2001 From: Dejin Zheng Date: Sat, 20 Jun 2020 22:55:34 +0800 Subject: [PATCH 306/618] net: phy: smsc: fix printing too many logs Commit 7ae7ad2f11ef47 ("net: phy: smsc: use phy_read_poll_timeout() to simplify the code") will print a lot of logs as follows when Ethernet cable is not connected: [ 4.473105] SMSC LAN8710/LAN8720 2188000.ethernet-1:00: lan87xx_read_status failed: -110 When wait 640 ms for check ENERGYON bit, the timeout should not be regarded as an actual error and an error message also should not be printed. due to a hardware bug in LAN87XX device, it leads to unstable detection of plugging in Ethernet cable when LAN87xx is in Energy Detect Power-Down mode. the workaround for it involves, when the link is down, and at each read_status() call: - disable EDPD mode, forcing the PHY out of low-power mode - waiting 640ms to see if we have any energy detected from the media - re-enable entry to EDPD mode This is presumably enough to allow the PHY to notice that a cable is connected, and resume normal operations to negotiate with the partner. The problem is that when no media is detected, the 640ms wait times out and this commit was modified to prints an error message. it is an inappropriate conversion by used phy_read_poll_timeout() to introduce this bug. so fix this issue by use read_poll_timeout() to replace phy_read_poll_timeout(). Fixes: 7ae7ad2f11ef47 ("net: phy: smsc: use phy_read_poll_timeout() to simplify the code") Reported-by: Kevin Groeneveld Signed-off-by: Dejin Zheng Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/smsc.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 93da7d3d0954..74568ae16125 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -122,10 +122,13 @@ static int lan87xx_read_status(struct phy_device *phydev) if (rc < 0) return rc; - /* Wait max 640 ms to detect energy */ - phy_read_poll_timeout(phydev, MII_LAN83C185_CTRL_STATUS, rc, - rc & MII_LAN83C185_ENERGYON, 10000, - 640000, true); + /* Wait max 640 ms to detect energy and the timeout is not + * an actual error. + */ + read_poll_timeout(phy_read, rc, + rc & MII_LAN83C185_ENERGYON || rc < 0, + 10000, 640000, true, phydev, + MII_LAN83C185_CTRL_STATUS); if (rc < 0) return rc; From f3fe412b0a634286a6a3753c3f9ff201e6bec716 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Sun, 21 Jun 2020 11:29:17 +0300 Subject: [PATCH 307/618] mlxsw: spectrum: Do not rely on machine endianness The second commit cited below performed a cast of 'u32 buffsize' to '(u16 *)' when calling mlxsw_sp_port_headroom_8x_adjust(): mlxsw_sp_port_headroom_8x_adjust(mlxsw_sp_port, (u16 *) &buffsize); Colin noted that this will behave differently on big endian architectures compared to little endian architectures. Fix this by following Colin's suggestion and have the function accept and return 'u32' instead of passing the current size by reference. Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Fixes: 60833d54d56c ("mlxsw: spectrum: Adjust headroom buffers for 8x ports") Signed-off-by: Ido Schimmel Reported-by: Colin Ian King Suggested-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 4 ++-- drivers/net/ethernet/mellanox/mlxsw/spectrum.h | 8 +++----- drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c | 2 +- drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c | 2 +- 4 files changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 55af877763ed..029ea344ad65 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -978,10 +978,10 @@ int __mlxsw_sp_port_headroom_set(struct mlxsw_sp_port *mlxsw_sp_port, int mtu, lossy = !(pfc || pause_en); thres_cells = mlxsw_sp_pg_buf_threshold_get(mlxsw_sp, mtu); - mlxsw_sp_port_headroom_8x_adjust(mlxsw_sp_port, &thres_cells); + thres_cells = mlxsw_sp_port_headroom_8x_adjust(mlxsw_sp_port, thres_cells); delay_cells = mlxsw_sp_pg_buf_delay_get(mlxsw_sp, mtu, delay, pfc, pause_en); - mlxsw_sp_port_headroom_8x_adjust(mlxsw_sp_port, &delay_cells); + delay_cells = mlxsw_sp_port_headroom_8x_adjust(mlxsw_sp_port, delay_cells); total_cells = thres_cells + delay_cells; taken_headroom_cells += total_cells; diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h index 6e87457dd635..3abe3e7d89bc 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h @@ -374,17 +374,15 @@ mlxsw_sp_port_vlan_find_by_vid(const struct mlxsw_sp_port *mlxsw_sp_port, return NULL; } -static inline void +static inline u32 mlxsw_sp_port_headroom_8x_adjust(const struct mlxsw_sp_port *mlxsw_sp_port, - u16 *p_size) + u32 size_cells) { /* Ports with eight lanes use two headroom buffers between which the * configured headroom size is split. Therefore, multiply the calculated * headroom size by two. */ - if (mlxsw_sp_port->mapping.width != 8) - return; - *p_size *= 2; + return mlxsw_sp_port->mapping.width == 8 ? 2 * size_cells : size_cells; } enum mlxsw_sp_flood_type { diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c index f25a8b084b4b..6f84557a5a6f 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c @@ -312,7 +312,7 @@ static int mlxsw_sp_port_pb_init(struct mlxsw_sp_port *mlxsw_sp_port) if (i == MLXSW_SP_PB_UNUSED) continue; - mlxsw_sp_port_headroom_8x_adjust(mlxsw_sp_port, &size); + size = mlxsw_sp_port_headroom_8x_adjust(mlxsw_sp_port, size); mlxsw_reg_pbmc_lossy_buffer_pack(pbmc_pl, i, size); } mlxsw_reg_pbmc_lossy_buffer_pack(pbmc_pl, diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c index f843545d3478..92351a79addc 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c @@ -782,7 +782,7 @@ mlxsw_sp_span_port_buffer_update(struct mlxsw_sp_port *mlxsw_sp_port, u16 mtu) speed = 0; buffsize = mlxsw_sp_span_buffsize_get(mlxsw_sp, speed, mtu); - mlxsw_sp_port_headroom_8x_adjust(mlxsw_sp_port, (u16 *) &buffsize); + buffsize = mlxsw_sp_port_headroom_8x_adjust(mlxsw_sp_port, buffsize); mlxsw_reg_sbib_pack(sbib_pl, mlxsw_sp_port->local_port, buffsize); return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sbib), sbib_pl); } From b835a71ef64a61383c414d6bf2896d2c0161deca Mon Sep 17 00:00:00 2001 From: Tuomas Tynkkynen Date: Sun, 21 Jun 2020 13:43:26 +0300 Subject: [PATCH 308/618] usbnet: smsc95xx: Fix use-after-free after removal Syzbot reports an use-after-free in workqueue context: BUG: KASAN: use-after-free in mutex_unlock+0x19/0x40 kernel/locking/mutex.c:737 mutex_unlock+0x19/0x40 kernel/locking/mutex.c:737 __smsc95xx_mdio_read drivers/net/usb/smsc95xx.c:217 [inline] smsc95xx_mdio_read+0x583/0x870 drivers/net/usb/smsc95xx.c:278 check_carrier+0xd1/0x2e0 drivers/net/usb/smsc95xx.c:644 process_one_work+0x777/0xf90 kernel/workqueue.c:2274 worker_thread+0xa8f/0x1430 kernel/workqueue.c:2420 kthread+0x2df/0x300 kernel/kthread.c:255 It looks like that smsc95xx_unbind() is freeing the structures that are still in use by the concurrently running workqueue callback. Thus switch to using cancel_delayed_work_sync() to ensure the work callback really is no longer active. Reported-by: syzbot+29dc7d4ae19b703ff947@syzkaller.appspotmail.com Signed-off-by: Tuomas Tynkkynen Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 355be77f4241..3cf4dc3433f9 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1324,7 +1324,7 @@ static void smsc95xx_unbind(struct usbnet *dev, struct usb_interface *intf) struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]); if (pdata) { - cancel_delayed_work(&pdata->carrier_check); + cancel_delayed_work_sync(&pdata->carrier_check); netif_dbg(dev, ifdown, dev->net, "free pdata\n"); kfree(pdata); pdata = NULL; From bf09fb6cba4f7099620cc9ed32d94c27c4af992e Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Mon, 22 Jun 2020 17:51:35 -0700 Subject: [PATCH 309/618] KVM: VMX: Stop context switching MSR_IA32_UMWAIT_CONTROL Remove support for context switching between the guest's and host's desired UMWAIT_CONTROL. Propagating the guest's value to hardware isn't required for correct functionality, e.g. KVM intercepts reads and writes to the MSR, and the latency effects of the settings controlled by the MSR are not architecturally visible. As a general rule, KVM should not allow the guest to control power management settings unless explicitly enabled by userspace, e.g. see KVM_CAP_X86_DISABLE_EXITS. E.g. Intel's SDM explicitly states that C0.2 can improve the performance of SMT siblings. A devious guest could disable C0.2 so as to improve the performance of their workloads at the detriment to workloads running in the host or on other VMs. Wholesale removal of UMWAIT_CONTROL context switching also fixes a race condition where updates from the host may cause KVM to enter the guest with the incorrect value. Because updates are are propagated to all CPUs via IPI (SMP function callback), the value in hardware may be stale with respect to the cached value and KVM could enter the guest with the wrong value in hardware. As above, the guest can't observe the bad value, but it's a weird and confusing wart in the implementation. Removal also fixes the unnecessary usage of VMX's atomic load/store MSR lists. Using the lists is only necessary for MSRs that are required for correct functionality immediately upon VM-Enter/VM-Exit, e.g. EFER on old hardware, or for MSRs that need to-the-uop precision, e.g. perf related MSRs. For UMWAIT_CONTROL, the effects are only visible in the kernel via TPAUSE/delay(), and KVM doesn't do any form of delay in vcpu_vmx_run(). Using the atomic lists is undesirable as they are more expensive than direct RDMSR/WRMSR. Furthermore, even if giving the guest control of the MSR is legitimate, e.g. in pass-through scenarios, it's not clear that the benefits would outweigh the overhead. E.g. saving and restoring an MSR across a VMX roundtrip costs ~250 cycles, and if the guest diverged from the host that cost would be paid on every run of the guest. In other words, if there is a legitimate use case then it should be enabled by a new per-VM capability. Note, KVM still needs to emulate MSR_IA32_UMWAIT_CONTROL so that it can correctly expose other WAITPKG features to the guest, e.g. TPAUSE, UMWAIT and UMONITOR. Fixes: 6e3ba4abcea56 ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL") Cc: stable@vger.kernel.org Cc: Jingqi Liu Cc: Tao Xu Signed-off-by: Sean Christopherson Message-Id: <20200623005135.10414-1-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini --- arch/x86/include/asm/mwait.h | 2 -- arch/x86/kernel/cpu/umwait.c | 6 ------ arch/x86/kvm/vmx/vmx.c | 18 ------------------ 3 files changed, 26 deletions(-) diff --git a/arch/x86/include/asm/mwait.h b/arch/x86/include/asm/mwait.h index 73d997aa2966..e039a933aca3 100644 --- a/arch/x86/include/asm/mwait.h +++ b/arch/x86/include/asm/mwait.h @@ -25,8 +25,6 @@ #define TPAUSE_C01_STATE 1 #define TPAUSE_C02_STATE 0 -u32 get_umwait_control_msr(void); - static inline void __monitor(const void *eax, unsigned long ecx, unsigned long edx) { diff --git a/arch/x86/kernel/cpu/umwait.c b/arch/x86/kernel/cpu/umwait.c index 300e3fd5ade3..ec8064c0ae03 100644 --- a/arch/x86/kernel/cpu/umwait.c +++ b/arch/x86/kernel/cpu/umwait.c @@ -18,12 +18,6 @@ */ static u32 umwait_control_cached = UMWAIT_CTRL_VAL(100000, UMWAIT_C02_ENABLE); -u32 get_umwait_control_msr(void) -{ - return umwait_control_cached; -} -EXPORT_SYMBOL_GPL(get_umwait_control_msr); - /* * Cache the original IA32_UMWAIT_CONTROL MSR value which is configured by * hardware or BIOS before kernel boot. diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index ad0ac8bc85d9..cb22f33bf1d8 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -6606,23 +6606,6 @@ static void atomic_switch_perf_msrs(struct vcpu_vmx *vmx) msrs[i].host, false); } -static void atomic_switch_umwait_control_msr(struct vcpu_vmx *vmx) -{ - u32 host_umwait_control; - - if (!vmx_has_waitpkg(vmx)) - return; - - host_umwait_control = get_umwait_control_msr(); - - if (vmx->msr_ia32_umwait_control != host_umwait_control) - add_atomic_switch_msr(vmx, MSR_IA32_UMWAIT_CONTROL, - vmx->msr_ia32_umwait_control, - host_umwait_control, false); - else - clear_atomic_switch_msr(vmx, MSR_IA32_UMWAIT_CONTROL); -} - static void vmx_update_hv_timer(struct kvm_vcpu *vcpu) { struct vcpu_vmx *vmx = to_vmx(vcpu); @@ -6729,7 +6712,6 @@ static fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu) pt_guest_enter(vmx); atomic_switch_perf_msrs(vmx); - atomic_switch_umwait_control_msr(vmx); if (enable_preemption_timer) vmx_update_hv_timer(vcpu); From 04a2c05179b732a4c097f0a9c701ef4c9a37e1e3 Mon Sep 17 00:00:00 2001 From: Frieder Schrempf Date: Thu, 28 May 2020 14:43:42 +0000 Subject: [PATCH 310/618] ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM The watchdog's WDOG_ANY signal is used to trigger a POR of the SoC, if a soft reset is issued. As the SoM hardware connects the WDOG_ANY and the POR signals, the watchdog node itself and the pin configuration should be part of the common SoM devicetree. Let's move it from the baseboard's devicetree to its proper place. Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards") Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi | 13 ------------- .../boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi | 13 +++++++++++++ 2 files changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi index f05e91841202..53a25fba34f6 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi @@ -232,13 +232,6 @@ &usdhc2 { status = "okay"; }; -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; -}; - &iomuxc { pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>; @@ -409,10 +402,4 @@ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 >; }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi index a17af4d9bfdf..fc316408721d 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi @@ -57,6 +57,13 @@ &qspi { status = "okay"; }; +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reset_out>; @@ -106,4 +113,10 @@ pinctrl_reset_out: rstoutgrp { MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 >; }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0 + >; + }; }; From d22a16cc92e04d053fd807ef3587e4f135e4206f Mon Sep 17 00:00:00 2001 From: Frieder Schrempf Date: Thu, 28 May 2020 14:43:43 +0000 Subject: [PATCH 311/618] ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain The WDOG_ANY signal is connected to the RESET_IN signal of the SoM and baseboard. It is currently configured as push-pull, which means that if some external device like a programmer wants to assert the RESET_IN signal by pulling it to ground, it drives against the high level WDOG_ANY output of the SoC. To fix this we set the WDOG_ANY signal to open-drain configuration. That way we make sure that the RESET_IN can be asserted by the watchdog as well as by external devices. Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards") Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi index fc316408721d..61ba21a605a8 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi @@ -116,7 +116,7 @@ MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 pinctrl_wdog: wdoggrp { fsl,pins = < - MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0 + MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x18b0 >; }; }; From de0083c7ed7dba036d1ed6e012157649d45313c8 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Sun, 21 Jun 2020 13:46:25 +0000 Subject: [PATCH 312/618] hsr: avoid to create proc file after unregister When an interface is being deleted, "/proc/net/dev_snmp6/" is deleted. The function for this is addrconf_ifdown() in the addrconf_notify() and it is called by notification, which is NETDEV_UNREGISTER. But, if NETDEV_CHANGEMTU is triggered after NETDEV_UNREGISTER, this proc file will be created again. This recreated proc file will be deleted by netdev_wati_allrefs(). Before netdev_wait_allrefs() is called, creating a new HSR interface routine can be executed and It tries to create a proc file but it will find an un-deleted proc file. At this point, it warns about it. To avoid this situation, it can use ->dellink() instead of ->ndo_uninit() to release resources because ->dellink() is called before NETDEV_UNREGISTER. So, a proc file will not be recreated. Test commands ip link add dummy0 type dummy ip link add dummy1 type dummy ip link set dummy0 mtu 1300 #SHELL1 while : do ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 done #SHELL2 while : do ip link del hsr0 done Splat looks like: [ 9888.980852][ T2752] proc_dir_entry 'dev_snmp6/hsr0' already registered [ 9888.981797][ C2] WARNING: CPU: 2 PID: 2752 at fs/proc/generic.c:372 proc_register+0x2d5/0x430 [ 9888.981798][ C2] Modules linked in: hsr dummy veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6x [ 9888.981814][ C2] CPU: 2 PID: 2752 Comm: ip Tainted: G W 5.8.0-rc1+ #616 [ 9888.981815][ C2] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 9888.981816][ C2] RIP: 0010:proc_register+0x2d5/0x430 [ 9888.981818][ C2] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 65 01 00 00 49 8b b5 e0 00 00 00 48 89 ea 40 [ 9888.981819][ C2] RSP: 0018:ffff8880628dedf0 EFLAGS: 00010286 [ 9888.981821][ C2] RAX: dffffc0000000008 RBX: ffff888028c69170 RCX: ffffffffaae09a62 [ 9888.981822][ C2] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88806c9f75ac [ 9888.981823][ C2] RBP: ffff888028c693f4 R08: ffffed100d9401bd R09: ffffed100d9401bd [ 9888.981824][ C2] R10: ffffffffaddf406f R11: 0000000000000001 R12: ffff888028c69308 [ 9888.981825][ C2] R13: ffff8880663584c8 R14: dffffc0000000000 R15: ffffed100518d27e [ 9888.981827][ C2] FS: 00007f3876b3b0c0(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 9888.981828][ C2] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9888.981829][ C2] CR2: 00007f387601a8c0 CR3: 000000004101a002 CR4: 00000000000606e0 [ 9888.981830][ C2] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 9888.981831][ C2] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 9888.981832][ C2] Call Trace: [ 9888.981833][ C2] ? snmp6_seq_show+0x180/0x180 [ 9888.981834][ C2] proc_create_single_data+0x7c/0xa0 [ 9888.981835][ C2] snmp6_register_dev+0xb0/0x130 [ 9888.981836][ C2] ipv6_add_dev+0x4b7/0xf60 [ 9888.981837][ C2] addrconf_notify+0x684/0x1ca0 [ 9888.981838][ C2] ? __mutex_unlock_slowpath+0xd0/0x670 [ 9888.981839][ C2] ? kasan_unpoison_shadow+0x30/0x40 [ 9888.981840][ C2] ? wait_for_completion+0x250/0x250 [ 9888.981841][ C2] ? inet6_ifinfo_notify+0x100/0x100 [ 9888.981842][ C2] ? dropmon_net_event+0x227/0x410 [ 9888.981843][ C2] ? notifier_call_chain+0x90/0x160 [ 9888.981844][ C2] ? inet6_ifinfo_notify+0x100/0x100 [ 9888.981845][ C2] notifier_call_chain+0x90/0x160 [ 9888.981846][ C2] register_netdevice+0xbe5/0x1070 [ ... ] Reported-by: syzbot+1d51c8b74efa4c44adeb@syzkaller.appspotmail.com Fixes: e0a4b99773d3 ("hsr: use upper/lower device infrastructure") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller --- net/hsr/hsr_device.c | 21 +-------------------- net/hsr/hsr_device.h | 2 +- net/hsr/hsr_main.c | 9 ++++++--- net/hsr/hsr_netlink.c | 17 +++++++++++++++++ 4 files changed, 25 insertions(+), 24 deletions(-) diff --git a/net/hsr/hsr_device.c b/net/hsr/hsr_device.c index cd99f548e440..478852ef98ef 100644 --- a/net/hsr/hsr_device.c +++ b/net/hsr/hsr_device.c @@ -339,7 +339,7 @@ static void hsr_announce(struct timer_list *t) rcu_read_unlock(); } -static void hsr_del_ports(struct hsr_priv *hsr) +void hsr_del_ports(struct hsr_priv *hsr) { struct hsr_port *port; @@ -356,31 +356,12 @@ static void hsr_del_ports(struct hsr_priv *hsr) hsr_del_port(port); } -/* This has to be called after all the readers are gone. - * Otherwise we would have to check the return value of - * hsr_port_get_hsr(). - */ -static void hsr_dev_destroy(struct net_device *hsr_dev) -{ - struct hsr_priv *hsr = netdev_priv(hsr_dev); - - hsr_debugfs_term(hsr); - hsr_del_ports(hsr); - - del_timer_sync(&hsr->prune_timer); - del_timer_sync(&hsr->announce_timer); - - hsr_del_self_node(hsr); - hsr_del_nodes(&hsr->node_db); -} - static const struct net_device_ops hsr_device_ops = { .ndo_change_mtu = hsr_dev_change_mtu, .ndo_open = hsr_dev_open, .ndo_stop = hsr_dev_close, .ndo_start_xmit = hsr_dev_xmit, .ndo_fix_features = hsr_fix_features, - .ndo_uninit = hsr_dev_destroy, }; static struct device_type hsr_type = { diff --git a/net/hsr/hsr_device.h b/net/hsr/hsr_device.h index a099d7de7e79..b8f9262ed101 100644 --- a/net/hsr/hsr_device.h +++ b/net/hsr/hsr_device.h @@ -11,6 +11,7 @@ #include #include "hsr_main.h" +void hsr_del_ports(struct hsr_priv *hsr); void hsr_dev_setup(struct net_device *dev); int hsr_dev_finalize(struct net_device *hsr_dev, struct net_device *slave[2], unsigned char multicast_spec, u8 protocol_version, @@ -18,5 +19,4 @@ int hsr_dev_finalize(struct net_device *hsr_dev, struct net_device *slave[2], void hsr_check_carrier_and_operstate(struct hsr_priv *hsr); bool is_hsr_master(struct net_device *dev); int hsr_get_max_mtu(struct hsr_priv *hsr); - #endif /* __HSR_DEVICE_H */ diff --git a/net/hsr/hsr_main.c b/net/hsr/hsr_main.c index e2564de67603..144da15f0a81 100644 --- a/net/hsr/hsr_main.c +++ b/net/hsr/hsr_main.c @@ -6,6 +6,7 @@ */ #include +#include #include #include #include @@ -100,8 +101,10 @@ static int hsr_netdev_notify(struct notifier_block *nb, unsigned long event, master = hsr_port_get_hsr(port->hsr, HSR_PT_MASTER); hsr_del_port(port); if (hsr_slave_empty(master->hsr)) { - unregister_netdevice_queue(master->dev, - &list_kill); + const struct rtnl_link_ops *ops; + + ops = master->dev->rtnl_link_ops; + ops->dellink(master->dev, &list_kill); unregister_netdevice_many(&list_kill); } } @@ -144,9 +147,9 @@ static int __init hsr_init(void) static void __exit hsr_exit(void) { - unregister_netdevice_notifier(&hsr_nb); hsr_netlink_exit(); hsr_debugfs_remove_root(); + unregister_netdevice_notifier(&hsr_nb); } module_init(hsr_init); diff --git a/net/hsr/hsr_netlink.c b/net/hsr/hsr_netlink.c index 1decb25f6764..6e14b7d22639 100644 --- a/net/hsr/hsr_netlink.c +++ b/net/hsr/hsr_netlink.c @@ -83,6 +83,22 @@ static int hsr_newlink(struct net *src_net, struct net_device *dev, return hsr_dev_finalize(dev, link, multicast_spec, hsr_version, extack); } +static void hsr_dellink(struct net_device *dev, struct list_head *head) +{ + struct hsr_priv *hsr = netdev_priv(dev); + + del_timer_sync(&hsr->prune_timer); + del_timer_sync(&hsr->announce_timer); + + hsr_debugfs_term(hsr); + hsr_del_ports(hsr); + + hsr_del_self_node(hsr); + hsr_del_nodes(&hsr->node_db); + + unregister_netdevice_queue(dev, head); +} + static int hsr_fill_info(struct sk_buff *skb, const struct net_device *dev) { struct hsr_priv *hsr = netdev_priv(dev); @@ -118,6 +134,7 @@ static struct rtnl_link_ops hsr_link_ops __read_mostly = { .priv_size = sizeof(struct hsr_priv), .setup = hsr_dev_setup, .newlink = hsr_newlink, + .dellink = hsr_dellink, .fill_info = hsr_fill_info, }; From 21a739c64d3e9871186483a0cc3e7b52638c3d59 Mon Sep 17 00:00:00 2001 From: Gaurav Singh Date: Sun, 21 Jun 2020 11:30:17 -0400 Subject: [PATCH 313/618] ethtool: Fix check in ethtool_rx_flow_rule_create Fix check in ethtool_rx_flow_rule_create Fixes: eca4205f9ec3 ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator") Signed-off-by: Gaurav Singh Signed-off-by: David S. Miller --- net/ethtool/ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ethtool/ioctl.c b/net/ethtool/ioctl.c index b5df90c981c2..21d5fc0f6bb3 100644 --- a/net/ethtool/ioctl.c +++ b/net/ethtool/ioctl.c @@ -2978,7 +2978,7 @@ ethtool_rx_flow_rule_create(const struct ethtool_rx_flow_spec_input *input) sizeof(match->mask.ipv6.dst)); } if (memcmp(v6_m_spec->ip6src, &zero_addr, sizeof(zero_addr)) || - memcmp(v6_m_spec->ip6src, &zero_addr, sizeof(zero_addr))) { + memcmp(v6_m_spec->ip6dst, &zero_addr, sizeof(zero_addr))) { match->dissector.used_keys |= BIT(FLOW_DISSECTOR_KEY_IPV6_ADDRS); match->dissector.offset[FLOW_DISSECTOR_KEY_IPV6_ADDRS] = From b562f58bbc12444219b74a5d6524977a3d87a022 Mon Sep 17 00:00:00 2001 From: Geliang Tang Date: Mon, 22 Jun 2020 19:45:58 +0800 Subject: [PATCH 314/618] mptcp: drop sndr_key in mptcp_syn_options In RFC 8684, we don't need to send sndr_key in SYN package anymore, so drop it. Fixes: cc7972ea1932 ("mptcp: parse and emit MP_CAPABLE option according to v1 spec") Signed-off-by: Geliang Tang Reviewed-by: Matthieu Baerts Signed-off-by: David S. Miller --- net/mptcp/options.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/mptcp/options.c b/net/mptcp/options.c index 490b92534afc..df9a51425c6f 100644 --- a/net/mptcp/options.c +++ b/net/mptcp/options.c @@ -336,9 +336,7 @@ bool mptcp_syn_options(struct sock *sk, const struct sk_buff *skb, */ subflow->snd_isn = TCP_SKB_CB(skb)->end_seq; if (subflow->request_mptcp) { - pr_debug("local_key=%llu", subflow->local_key); opts->suboptions = OPTION_MPTCP_MPC_SYN; - opts->sndr_key = subflow->local_key; *size = TCPOLEN_MPTCP_MPC_SYN; return true; } else if (subflow->request_join) { From 26ac10be3c80a26d03c950b7387c4b9566c260b6 Mon Sep 17 00:00:00 2001 From: Aiden Leong Date: Mon, 22 Jun 2020 20:04:58 -0700 Subject: [PATCH 315/618] GUE: Fix a typo Fix a typo in gue.h Signed-off-by: Aiden Leong Signed-off-by: David S. Miller --- include/net/gue.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/gue.h b/include/net/gue.h index 3a6595bfa641..e42402f180b7 100644 --- a/include/net/gue.h +++ b/include/net/gue.h @@ -21,7 +21,7 @@ * | | * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * - * C bit indicates contol message when set, data message when unset. + * C bit indicates control message when set, data message when unset. * For a control message, proto/ctype is interpreted as a type of * control message. For data messages, proto/ctype is the IP protocol * of the next header. From d35d3660e065b69fdb8bf512f3d899f350afce52 Mon Sep 17 00:00:00 2001 From: Todd Kjos Date: Mon, 22 Jun 2020 13:07:15 -0700 Subject: [PATCH 316/618] binder: fix null deref of proc->context The binder driver makes the assumption proc->context pointer is invariant after initialization (as documented in the kerneldoc header for struct proc). However, in commit f0fe2c0f050d ("binder: prevent UAF for binderfs devices II") proc->context is set to NULL during binder_deferred_release(). Another proc was in the middle of setting up a transaction to the dying process and crashed on a NULL pointer deref on "context" which is a local set to &proc->context: new_ref->data.desc = (node == context->binder_context_mgr_node) ? 0 : 1; Here's the stack: [ 5237.855435] Call trace: [ 5237.855441] binder_get_ref_for_node_olocked+0x100/0x2ec [ 5237.855446] binder_inc_ref_for_node+0x140/0x280 [ 5237.855451] binder_translate_binder+0x1d0/0x388 [ 5237.855456] binder_transaction+0x2228/0x3730 [ 5237.855461] binder_thread_write+0x640/0x25bc [ 5237.855466] binder_ioctl_write_read+0xb0/0x464 [ 5237.855471] binder_ioctl+0x30c/0x96c [ 5237.855477] do_vfs_ioctl+0x3e0/0x700 [ 5237.855482] __arm64_sys_ioctl+0x78/0xa4 [ 5237.855488] el0_svc_common+0xb4/0x194 [ 5237.855493] el0_svc_handler+0x74/0x98 [ 5237.855497] el0_svc+0x8/0xc The fix is to move the kfree of the binder_device to binder_free_proc() so the binder_device is freed when we know there are no references remaining on the binder_proc. Fixes: f0fe2c0f050d ("binder: prevent UAF for binderfs devices II") Acked-by: Christian Brauner Signed-off-by: Todd Kjos Cc: stable Link: https://lore.kernel.org/r/20200622200715.114382-1-tkjos@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/android/binder.c b/drivers/android/binder.c index e47c8a4c83db..f50c5f182bb5 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -4686,8 +4686,15 @@ static struct binder_thread *binder_get_thread(struct binder_proc *proc) static void binder_free_proc(struct binder_proc *proc) { + struct binder_device *device; + BUG_ON(!list_empty(&proc->todo)); BUG_ON(!list_empty(&proc->delivered_death)); + device = container_of(proc->context, struct binder_device, context); + if (refcount_dec_and_test(&device->ref)) { + kfree(proc->context->name); + kfree(device); + } binder_alloc_deferred_release(&proc->alloc); put_task_struct(proc->tsk); binder_stats_deleted(BINDER_STAT_PROC); @@ -5406,7 +5413,6 @@ static int binder_node_release(struct binder_node *node, int refs) static void binder_deferred_release(struct binder_proc *proc) { struct binder_context *context = proc->context; - struct binder_device *device; struct rb_node *n; int threads, nodes, incoming_refs, outgoing_refs, active_transactions; @@ -5423,12 +5429,6 @@ static void binder_deferred_release(struct binder_proc *proc) context->binder_context_mgr_node = NULL; } mutex_unlock(&context->context_mgr_node_lock); - device = container_of(proc->context, struct binder_device, context); - if (refcount_dec_and_test(&device->ref)) { - kfree(context->name); - kfree(device); - } - proc->context = NULL; binder_inner_proc_lock(proc); /* * Make sure proc stays alive after we From f76d77f50b343bc7f7d01e4c2771d43fb074f617 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Fri, 19 Jun 2020 19:51:15 +0300 Subject: [PATCH 317/618] mei: me: disable mei interface on Mehlow server platforms For SPS firmware versions 5.0 and newer the way detection has changed. The detection is done now via PCI_CFG_HFS_3 register. To prevent conflict the previous method will get sps_4 suffix Disable both CNP_H and CNP_H_3 interfaces. CNP_H_3 requires a separate configuration as it doesn't support DMA. Cc: Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20200619165121.2145330-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hw-me-regs.h | 2 ++ drivers/misc/mei/hw-me.c | 60 +++++++++++++++++++++++++++++++---- drivers/misc/mei/hw-me.h | 13 +++++--- drivers/misc/mei/pci-me.c | 16 +++++----- 4 files changed, 73 insertions(+), 18 deletions(-) diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index 9392934e3a06..01b1bf74f262 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -107,6 +107,8 @@ # define PCI_CFG_HFS_1_D0I3_MSK 0x80000000 #define PCI_CFG_HFS_2 0x48 #define PCI_CFG_HFS_3 0x60 +# define PCI_CFG_HFS_3_FW_SKU_MSK 0x00000070 +# define PCI_CFG_HFS_3_FW_SKU_SPS 0x00000060 #define PCI_CFG_HFS_4 0x64 #define PCI_CFG_HFS_5 0x68 #define PCI_CFG_HFS_6 0x6C diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c index f620442addf5..f8155c1e811d 100644 --- a/drivers/misc/mei/hw-me.c +++ b/drivers/misc/mei/hw-me.c @@ -1366,7 +1366,7 @@ static bool mei_me_fw_type_nm(struct pci_dev *pdev) #define MEI_CFG_FW_NM \ .quirk_probe = mei_me_fw_type_nm -static bool mei_me_fw_type_sps(struct pci_dev *pdev) +static bool mei_me_fw_type_sps_4(struct pci_dev *pdev) { u32 reg; unsigned int devfn; @@ -1382,7 +1382,36 @@ static bool mei_me_fw_type_sps(struct pci_dev *pdev) return (reg & 0xf0000) == 0xf0000; } -#define MEI_CFG_FW_SPS \ +#define MEI_CFG_FW_SPS_4 \ + .quirk_probe = mei_me_fw_type_sps_4 + +/** + * mei_me_fw_sku_sps() - check for sps sku + * + * Read ME FW Status register to check for SPS Firmware. + * The SPS FW is only signaled in pci function 0 + * + * @pdev: pci device + * + * Return: true in case of SPS firmware + */ +static bool mei_me_fw_type_sps(struct pci_dev *pdev) +{ + u32 reg; + u32 fw_type; + unsigned int devfn; + + devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0); + pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_3, ®); + trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_3", PCI_CFG_HFS_3, reg); + fw_type = (reg & PCI_CFG_HFS_3_FW_SKU_MSK); + + dev_dbg(&pdev->dev, "fw type is %d\n", fw_type); + + return fw_type == PCI_CFG_HFS_3_FW_SKU_SPS; +} + +#define MEI_CFG_FW_SPS \ .quirk_probe = mei_me_fw_type_sps #define MEI_CFG_FW_VER_SUPP \ @@ -1452,10 +1481,17 @@ static const struct mei_cfg mei_me_pch8_cfg = { }; /* PCH8 Lynx Point with quirk for SPS Firmware exclusion */ -static const struct mei_cfg mei_me_pch8_sps_cfg = { +static const struct mei_cfg mei_me_pch8_sps_4_cfg = { MEI_CFG_PCH8_HFS, MEI_CFG_FW_VER_SUPP, - MEI_CFG_FW_SPS, + MEI_CFG_FW_SPS_4, +}; + +/* LBG with quirk for SPS (4.0) Firmware exclusion */ +static const struct mei_cfg mei_me_pch12_sps_4_cfg = { + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_FW_SPS_4, }; /* Cannon Lake and newer devices */ @@ -1465,8 +1501,18 @@ static const struct mei_cfg mei_me_pch12_cfg = { MEI_CFG_DMA_128, }; -/* LBG with quirk for SPS Firmware exclusion */ +/* Cannon Lake with quirk for SPS 5.0 and newer Firmware exclusion */ static const struct mei_cfg mei_me_pch12_sps_cfg = { + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_DMA_128, + MEI_CFG_FW_SPS, +}; + +/* Cannon Lake with quirk for SPS 5.0 and newer Firmware exclusion + * w/o DMA support + */ +static const struct mei_cfg mei_me_pch12_nodma_sps_cfg = { MEI_CFG_PCH8_HFS, MEI_CFG_FW_VER_SUPP, MEI_CFG_FW_SPS, @@ -1492,9 +1538,11 @@ static const struct mei_cfg *const mei_cfg_list[] = { [MEI_ME_PCH7_CFG] = &mei_me_pch7_cfg, [MEI_ME_PCH_CPT_PBG_CFG] = &mei_me_pch_cpt_pbg_cfg, [MEI_ME_PCH8_CFG] = &mei_me_pch8_cfg, - [MEI_ME_PCH8_SPS_CFG] = &mei_me_pch8_sps_cfg, + [MEI_ME_PCH8_SPS_4_CFG] = &mei_me_pch8_sps_4_cfg, [MEI_ME_PCH12_CFG] = &mei_me_pch12_cfg, + [MEI_ME_PCH12_SPS_4_CFG] = &mei_me_pch12_sps_4_cfg, [MEI_ME_PCH12_SPS_CFG] = &mei_me_pch12_sps_cfg, + [MEI_ME_PCH12_SPS_NODMA_CFG] = &mei_me_pch12_nodma_sps_cfg, [MEI_ME_PCH15_CFG] = &mei_me_pch15_cfg, }; diff --git a/drivers/misc/mei/hw-me.h b/drivers/misc/mei/hw-me.h index b6b94e211464..52e0c6d578f2 100644 --- a/drivers/misc/mei/hw-me.h +++ b/drivers/misc/mei/hw-me.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Copyright (c) 2012-2019, Intel Corporation. All rights reserved. + * Copyright (c) 2012-2020, Intel Corporation. All rights reserved. * Intel Management Engine Interface (Intel MEI) Linux driver */ @@ -76,11 +76,14 @@ struct mei_me_hw { * with quirk for Node Manager exclusion. * @MEI_ME_PCH8_CFG: Platform Controller Hub Gen8 and newer * client platforms. - * @MEI_ME_PCH8_SPS_CFG: Platform Controller Hub Gen8 and newer + * @MEI_ME_PCH8_SPS_4_CFG: Platform Controller Hub Gen8 and newer * servers platforms with quirk for * SPS firmware exclusion. * @MEI_ME_PCH12_CFG: Platform Controller Hub Gen12 and newer - * @MEI_ME_PCH12_SPS_CFG: Platform Controller Hub Gen12 and newer + * @MEI_ME_PCH12_SPS_4_CFG:Platform Controller Hub Gen12 up to 4.0 + * servers platforms with quirk for + * SPS firmware exclusion. + * @MEI_ME_PCH12_SPS_CFG: Platform Controller Hub Gen12 5.0 and newer * servers platforms with quirk for * SPS firmware exclusion. * @MEI_ME_PCH15_CFG: Platform Controller Hub Gen15 and newer @@ -94,9 +97,11 @@ enum mei_cfg_idx { MEI_ME_PCH7_CFG, MEI_ME_PCH_CPT_PBG_CFG, MEI_ME_PCH8_CFG, - MEI_ME_PCH8_SPS_CFG, + MEI_ME_PCH8_SPS_4_CFG, MEI_ME_PCH12_CFG, + MEI_ME_PCH12_SPS_4_CFG, MEI_ME_PCH12_SPS_CFG, + MEI_ME_PCH12_SPS_NODMA_CFG, MEI_ME_PCH15_CFG, MEI_ME_NUM_CFG, }; diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index 71f795b510ce..1bcc724a18aa 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -59,18 +59,18 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_PPT_1, MEI_ME_PCH7_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_PPT_2, MEI_ME_PCH7_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_PPT_3, MEI_ME_PCH7_CFG)}, - {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_H, MEI_ME_PCH8_SPS_CFG)}, - {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_W, MEI_ME_PCH8_SPS_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_H, MEI_ME_PCH8_SPS_4_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_W, MEI_ME_PCH8_SPS_4_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_LP, MEI_ME_PCH8_CFG)}, - {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_HR, MEI_ME_PCH8_SPS_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_HR, MEI_ME_PCH8_SPS_4_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_WPT_LP, MEI_ME_PCH8_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_WPT_LP_2, MEI_ME_PCH8_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_SPT, MEI_ME_PCH8_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_2, MEI_ME_PCH8_CFG)}, - {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H, MEI_ME_PCH8_SPS_CFG)}, - {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H_2, MEI_ME_PCH8_SPS_CFG)}, - {MEI_PCI_DEVICE(MEI_DEV_ID_LBG, MEI_ME_PCH12_SPS_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H, MEI_ME_PCH8_SPS_4_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H_2, MEI_ME_PCH8_SPS_4_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_LBG, MEI_ME_PCH12_SPS_4_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_BXT_M, MEI_ME_PCH8_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_APL_I, MEI_ME_PCH8_CFG)}, @@ -84,8 +84,8 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP, MEI_ME_PCH12_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP_3, MEI_ME_PCH8_CFG)}, - {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H, MEI_ME_PCH12_CFG)}, - {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H_3, MEI_ME_PCH8_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H, MEI_ME_PCH12_SPS_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H_3, MEI_ME_PCH12_SPS_NODMA_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_CMP_LP, MEI_ME_PCH12_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_CMP_LP_3, MEI_ME_PCH8_CFG)}, From 8c289ea064165237891a7b4be77b74d5cba8fa99 Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Fri, 19 Jun 2020 19:51:21 +0300 Subject: [PATCH 318/618] mei: me: add tiger lake point device ids for H platforms. Add Tiger Lake device ids H for HECI1. TGH_H is also used in Tatlow SPS platform we need to disable the mei interface there. Cc: Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20200619165121.2145330-7-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hw-me-regs.h | 1 + drivers/misc/mei/hw-me.c | 10 ++++++++++ drivers/misc/mei/hw-me.h | 4 ++++ drivers/misc/mei/pci-me.c | 1 + 4 files changed, 16 insertions(+) diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index 01b1bf74f262..7becfc768bbc 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -94,6 +94,7 @@ #define MEI_DEV_ID_JSP_N 0x4DE0 /* Jasper Lake Point N */ #define MEI_DEV_ID_TGP_LP 0xA0E0 /* Tiger Lake Point LP */ +#define MEI_DEV_ID_TGP_H 0x43E0 /* Tiger Lake Point H */ #define MEI_DEV_ID_MCC 0x4B70 /* Mule Creek Canyon (EHL) */ #define MEI_DEV_ID_MCC_4 0x4B75 /* Mule Creek Canyon 4 (EHL) */ diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c index f8155c1e811d..7649710a2ab9 100644 --- a/drivers/misc/mei/hw-me.c +++ b/drivers/misc/mei/hw-me.c @@ -1526,6 +1526,15 @@ static const struct mei_cfg mei_me_pch15_cfg = { MEI_CFG_TRC, }; +/* Tiger Lake with quirk for SPS 5.0 and newer Firmware exclusion */ +static const struct mei_cfg mei_me_pch15_sps_cfg = { + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_DMA_128, + MEI_CFG_TRC, + MEI_CFG_FW_SPS, +}; + /* * mei_cfg_list - A list of platform platform specific configurations. * Note: has to be synchronized with enum mei_cfg_idx. @@ -1544,6 +1553,7 @@ static const struct mei_cfg *const mei_cfg_list[] = { [MEI_ME_PCH12_SPS_CFG] = &mei_me_pch12_sps_cfg, [MEI_ME_PCH12_SPS_NODMA_CFG] = &mei_me_pch12_nodma_sps_cfg, [MEI_ME_PCH15_CFG] = &mei_me_pch15_cfg, + [MEI_ME_PCH15_SPS_CFG] = &mei_me_pch15_sps_cfg, }; const struct mei_cfg *mei_me_get_cfg(kernel_ulong_t idx) diff --git a/drivers/misc/mei/hw-me.h b/drivers/misc/mei/hw-me.h index 52e0c6d578f2..6a8973649c49 100644 --- a/drivers/misc/mei/hw-me.h +++ b/drivers/misc/mei/hw-me.h @@ -87,6 +87,9 @@ struct mei_me_hw { * servers platforms with quirk for * SPS firmware exclusion. * @MEI_ME_PCH15_CFG: Platform Controller Hub Gen15 and newer + * @MEI_ME_PCH15_SPS_CFG: Platform Controller Hub Gen15 and newer + * servers platforms with quirk for + * SPS firmware exclusion. * @MEI_ME_NUM_CFG: Upper Sentinel. */ enum mei_cfg_idx { @@ -103,6 +106,7 @@ enum mei_cfg_idx { MEI_ME_PCH12_SPS_CFG, MEI_ME_PCH12_SPS_NODMA_CFG, MEI_ME_PCH15_CFG, + MEI_ME_PCH15_SPS_CFG, MEI_ME_NUM_CFG, }; diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index 1bcc724a18aa..2a3f2fd5df50 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -96,6 +96,7 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_ICP_LP, MEI_ME_PCH12_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_TGP_LP, MEI_ME_PCH15_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_TGP_H, MEI_ME_PCH15_SPS_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_JSP_N, MEI_ME_PCH15_CFG)}, From 9486727f5981a5ec5c0b699fb1777451bd6786e4 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Tue, 23 Jun 2020 07:13:40 +0800 Subject: [PATCH 319/618] iommu/vt-d: Make Intel SVM code 64-bit only Current Intel SVM is designed by setting the pgd_t of the processor page table to FLPTR field of the PASID entry. The first level translation only supports 4 and 5 level paging structures, hence it's infeasible for the IOMMU to share a processor's page table when it's running in 32-bit mode. Let's disable 32bit support for now and claim support only when all the missing pieces are ready in the future. Fixes: 1c4f88b7f1f92 ("iommu/vt-d: Shared virtual address in scalable mode") Suggested-by: Joerg Roedel Signed-off-by: Lu Baolu Link: https://lore.kernel.org/r/20200622231345.29722-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel --- drivers/iommu/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index b510f67dfa49..6dc49ed8377a 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -211,7 +211,7 @@ config INTEL_IOMMU_DEBUGFS config INTEL_IOMMU_SVM bool "Support for Shared Virtual Memory with Intel IOMMU" - depends on INTEL_IOMMU && X86 + depends on INTEL_IOMMU && X86_64 select PCI_PASID select PCI_PRI select MMU_NOTIFIER From 16ecf10e815d70d11d2300243f4a3b4c7c5acac7 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Tue, 23 Jun 2020 07:13:41 +0800 Subject: [PATCH 320/618] iommu/vt-d: Set U/S bit in first level page table by default When using first-level translation for IOVA, currently the U/S bit in the page table is cleared which implies DMA requests with user privilege are blocked. As the result, following error messages might be observed when passing through a device to user level: DMAR: DRHD: handling fault status reg 3 DMAR: [DMA Read] Request device [41:00.0] PASID 1 fault addr 7ecdcd000 [fault reason 129] SM: U/S set 0 for first-level translation with user privilege This fixes it by setting U/S bit in the first level page table and makes IOVA over first level compatible with previous second-level translation. Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level") Reported-by: Xin Zeng Signed-off-by: Lu Baolu Link: https://lore.kernel.org/r/20200622231345.29722-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel --- drivers/iommu/intel/iommu.c | 5 ++--- include/linux/intel-iommu.h | 1 + 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 9129663a7406..0fa394f7bbf9 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -921,7 +921,7 @@ static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain, domain_flush_cache(domain, tmp_page, VTD_PAGE_SIZE); pteval = ((uint64_t)virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE; if (domain_use_first_level(domain)) - pteval |= DMA_FL_PTE_XD; + pteval |= DMA_FL_PTE_XD | DMA_FL_PTE_US; if (cmpxchg64(&pte->val, 0ULL, pteval)) /* Someone else set it while we were thinking; use theirs. */ free_pgtable_page(tmp_page); @@ -1951,7 +1951,6 @@ static inline void context_set_sm_rid2pasid(struct context_entry *context, unsigned long pasid) { context->hi |= pasid & ((1 << 20) - 1); - context->hi |= (1 << 20); } /* @@ -2243,7 +2242,7 @@ static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn, attr = prot & (DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP); if (domain_use_first_level(domain)) - attr |= DMA_FL_PTE_PRESENT | DMA_FL_PTE_XD; + attr |= DMA_FL_PTE_PRESENT | DMA_FL_PTE_XD | DMA_FL_PTE_US; if (!sg) { sg_res = nr_pages; diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index 4100bd224f5c..3e8fa1c7a1e6 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -41,6 +41,7 @@ #define DMA_PTE_SNP BIT_ULL(11) #define DMA_FL_PTE_PRESENT BIT_ULL(0) +#define DMA_FL_PTE_US BIT_ULL(2) #define DMA_FL_PTE_XD BIT_ULL(63) #define ADDR_WIDTH_5LEVEL (57) From 67e8a5b18d41af9298db5c17193f671f235cce01 Mon Sep 17 00:00:00 2001 From: Rajat Jain Date: Tue, 23 Jun 2020 07:13:42 +0800 Subject: [PATCH 321/618] iommu/vt-d: Don't apply gfx quirks to untrusted devices Currently, an external malicious PCI device can masquerade the VID:PID of faulty gfx devices, and thus apply iommu quirks to effectively disable the IOMMU restrictions for itself. Thus we need to ensure that the device we are applying quirks to, is indeed an internal trusted device. Signed-off-by: Rajat Jain Reviewed-by: Ashok Raj Reviewed-by: Mika Westerberg Acked-by: Lu Baolu Link: https://lore.kernel.org/r/20200622231345.29722-4-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel --- drivers/iommu/intel/iommu.c | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 0fa394f7bbf9..66d07b1a3be2 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -6020,6 +6020,23 @@ intel_iommu_domain_set_attr(struct iommu_domain *domain, return ret; } +/* + * Check that the device does not live on an external facing PCI port that is + * marked as untrusted. Such devices should not be able to apply quirks and + * thus not be able to bypass the IOMMU restrictions. + */ +static bool risky_device(struct pci_dev *pdev) +{ + if (pdev->untrusted) { + pci_info(pdev, + "Skipping IOMMU quirk for dev [%04X:%04X] on untrusted PCI link\n", + pdev->vendor, pdev->device); + pci_info(pdev, "Please check with your BIOS/Platform vendor about this\n"); + return true; + } + return false; +} + const struct iommu_ops intel_iommu_ops = { .capable = intel_iommu_capable, .domain_alloc = intel_iommu_domain_alloc, @@ -6059,6 +6076,9 @@ const struct iommu_ops intel_iommu_ops = { static void quirk_iommu_igfx(struct pci_dev *dev) { + if (risky_device(dev)) + return; + pci_info(dev, "Disabling IOMMU for graphics on this chipset\n"); dmar_map_gfx = 0; } @@ -6100,6 +6120,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x163D, quirk_iommu_igfx); static void quirk_iommu_rwbf(struct pci_dev *dev) { + if (risky_device(dev)) + return; + /* * Mobile 4 Series Chipset neglects to set RWBF capability, * but needs it. Same seems to hold for the desktop versions. @@ -6130,6 +6153,9 @@ static void quirk_calpella_no_shadow_gtt(struct pci_dev *dev) { unsigned short ggc; + if (risky_device(dev)) + return; + if (pci_read_config_word(dev, GGC, &ggc)) return; @@ -6163,6 +6189,12 @@ static void __init check_tylersburg_isoch(void) pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x3a3e, NULL); if (!pdev) return; + + if (risky_device(pdev)) { + pci_dev_put(pdev); + return; + } + pci_dev_put(pdev); /* System Management Registers. Might be hidden, in which case @@ -6172,6 +6204,11 @@ static void __init check_tylersburg_isoch(void) if (!pdev) return; + if (risky_device(pdev)) { + pci_dev_put(pdev); + return; + } + if (pci_read_config_dword(pdev, 0x188, &vtisochctrl)) { pci_dev_put(pdev); return; From 50310600ebda74b9988467e2e6128711c7ba56fc Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Tue, 23 Jun 2020 07:13:43 +0800 Subject: [PATCH 322/618] iommu/vt-d: Enable PCI ACS for platform opt in hint PCI ACS is disabled if Intel IOMMU is off by default or intel_iommu=off is used in command line. Unfortunately, Intel IOMMU will be forced on if there're devices sitting on an external facing PCI port that is marked as untrusted (for example, thunderbolt peripherals). That means, PCI ACS is disabled while Intel IOMMU is forced on to isolate those devices. As the result, the devices of an MFD will be grouped by a single group even the ACS is supported on device. [ 0.691263] pci 0000:00:07.1: Adding to iommu group 3 [ 0.691277] pci 0000:00:07.2: Adding to iommu group 3 [ 0.691292] pci 0000:00:07.3: Adding to iommu group 3 Fix it by requesting PCI ACS when Intel IOMMU is detected with platform opt in hint. Fixes: 89a6079df791a ("iommu/vt-d: Force IOMMU on for platform opt in hint") Co-developed-by: Lalithambika Krishnakumar Signed-off-by: Lalithambika Krishnakumar Signed-off-by: Lu Baolu Reviewed-by: Mika Westerberg Cc: Mika Westerberg Cc: Ashok Raj Link: https://lore.kernel.org/r/20200622231345.29722-5-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel --- drivers/iommu/intel/dmar.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c index cc46dff98fa0..683b812c5c47 100644 --- a/drivers/iommu/intel/dmar.c +++ b/drivers/iommu/intel/dmar.c @@ -898,7 +898,8 @@ int __init detect_intel_iommu(void) if (!ret) ret = dmar_walk_dmar_table((struct acpi_table_dmar *)dmar_tbl, &validate_drhd_cb); - if (!ret && !no_iommu && !iommu_detected && !dmar_disabled) { + if (!ret && !no_iommu && !iommu_detected && + (!dmar_disabled || dmar_platform_optin())) { iommu_detected = 1; /* Make sure ACS will be enabled */ pci_request_acs(); From 04c00956ee3cd138fd38560a91452a804a8c5550 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Tue, 23 Jun 2020 07:13:44 +0800 Subject: [PATCH 323/618] iommu/vt-d: Update scalable mode paging structure coherency The Scalable-mode Page-walk Coherency (SMPWC) field in the VT-d extended capability register indicates the hardware coherency behavior on paging structures accessed through the pasid table entry. This is ignored in current code and using ECAP.C instead which is only valid in legacy mode. Fix this so that paging structure updates could be manually flushed from the cache line if hardware page walking is not snooped. Fixes: 765b6a98c1de3 ("iommu/vt-d: Enumerate the scalable mode capability") Signed-off-by: Lu Baolu Cc: Ashok Raj Cc: Kevin Tian Cc: Jacob Pan Link: https://lore.kernel.org/r/20200622231345.29722-6-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel --- drivers/iommu/intel/iommu.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 66d07b1a3be2..f16bf63ea9fd 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -612,6 +612,12 @@ struct intel_iommu *domain_get_iommu(struct dmar_domain *domain) return g_iommus[iommu_id]; } +static inline bool iommu_paging_structure_coherency(struct intel_iommu *iommu) +{ + return sm_supported(iommu) ? + ecap_smpwc(iommu->ecap) : ecap_coherent(iommu->ecap); +} + static void domain_update_iommu_coherency(struct dmar_domain *domain) { struct dmar_drhd_unit *drhd; @@ -623,7 +629,7 @@ static void domain_update_iommu_coherency(struct dmar_domain *domain) for_each_domain_iommu(i, domain) { found = true; - if (!ecap_coherent(g_iommus[i]->ecap)) { + if (!iommu_paging_structure_coherency(g_iommus[i])) { domain->iommu_coherency = 0; break; } @@ -634,7 +640,7 @@ static void domain_update_iommu_coherency(struct dmar_domain *domain) /* No hardware attached; use lowest common denominator */ rcu_read_lock(); for_each_active_iommu(iommu, drhd) { - if (!ecap_coherent(iommu->ecap)) { + if (!iommu_paging_structure_coherency(iommu)) { domain->iommu_coherency = 0; break; } @@ -2094,7 +2100,8 @@ static int domain_context_mapping_one(struct dmar_domain *domain, context_set_fault_enable(context); context_set_present(context); - domain_flush_cache(domain, context, sizeof(*context)); + if (!ecap_coherent(iommu->ecap)) + clflush_cache_range(context, sizeof(*context)); /* * It's a non-present to present mapping. If hardware doesn't cache From 48f0bcfb7aad2c6eb4c1e66476b58475aa14393e Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Tue, 23 Jun 2020 07:13:45 +0800 Subject: [PATCH 324/618] iommu/vt-d: Fix misuse of iommu_domain_identity_map() The iommu_domain_identity_map() helper takes start/end PFN as arguments. Fix a misuse case where the start and end addresses are passed. Fixes: e70b081c6f376 ("iommu/vt-d: Remove IOVA handling code from the non-dma_ops path") Reported-by: Alex Williamson Signed-off-by: Lu Baolu Reviewed-by: Jerry Snitselaar Cc: Tom Murphy Link: https://lore.kernel.org/r/20200622231345.29722-7-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel --- drivers/iommu/intel/iommu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index f16bf63ea9fd..d759e7234e98 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -2701,7 +2701,9 @@ static int __init si_domain_init(int hw) end >> agaw_to_width(si_domain->agaw))) continue; - ret = iommu_domain_identity_map(si_domain, start, end); + ret = iommu_domain_identity_map(si_domain, + mm_to_dma_pfn(start >> PAGE_SHIFT), + mm_to_dma_pfn(end >> PAGE_SHIFT)); if (ret) return ret; } From bf10bd0be53282183f374af23577b18b5fbf7801 Mon Sep 17 00:00:00 2001 From: Xiaoyao Li Date: Tue, 16 Jun 2020 15:33:07 +0800 Subject: [PATCH 325/618] KVM: X86: Fix MSR range of APIC registers in X2APIC mode Only MSR address range 0x800 through 0x8ff is architecturally reserved and dedicated for accessing APIC registers in x2APIC mode. Fixes: 0105d1a52640 ("KVM: x2apic interface to lapic") Signed-off-by: Xiaoyao Li Message-Id: <20200616073307.16440-1-xiaoyao.li@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Sean Christopherson Reviewed-by: Jim Mattson Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 00c88c2f34e4..29d9b078ce69 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2856,7 +2856,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) return kvm_mtrr_set_msr(vcpu, msr, data); case MSR_IA32_APICBASE: return kvm_set_apic_base(vcpu, msr_info); - case APIC_BASE_MSR ... APIC_BASE_MSR + 0x3ff: + case APIC_BASE_MSR ... APIC_BASE_MSR + 0xff: return kvm_x2apic_msr_write(vcpu, msr, data); case MSR_IA32_TSCDEADLINE: kvm_set_lapic_tscdeadline_msr(vcpu, data); @@ -3196,7 +3196,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) case MSR_IA32_APICBASE: msr_info->data = kvm_get_apic_base(vcpu); break; - case APIC_BASE_MSR ... APIC_BASE_MSR + 0x3ff: + case APIC_BASE_MSR ... APIC_BASE_MSR + 0xff: return kvm_x2apic_msr_read(vcpu, msr_info->index, &msr_info->data); case MSR_IA32_TSCDEADLINE: msr_info->data = kvm_get_lapic_tscdeadline_msr(vcpu); From 26769f96e6231095f6b1cc3090c903280d44bb57 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Tue, 16 Jun 2020 08:47:41 -0300 Subject: [PATCH 326/618] KVM: x86: allow TSC to differ by NTP correction bounds without TSC scaling The Linux TSC calibration procedure is subject to small variations (its common to see +-1 kHz difference between reboots on a given CPU, for example). So migrating a guest between two hosts with identical processor can fail, in case of a small variation in calibrated TSC between them. Without TSC scaling, the current kernel interface will either return an error (if user_tsc_khz <= tsc_khz) or enable TSC catchup mode. This change enables the following TSC tolerance check to accept KVM_SET_TSC_KHZ within tsc_tolerance_ppm (which is 250ppm by default). /* * Compute the variation in TSC rate which is acceptable * within the range of tolerance and decide if the * rate being applied is within that bounds of the hardware * rate. If so, no scaling or compensation need be done. */ thresh_lo = adjust_tsc_khz(tsc_khz, -tsc_tolerance_ppm); thresh_hi = adjust_tsc_khz(tsc_khz, tsc_tolerance_ppm); if (user_tsc_khz < thresh_lo || user_tsc_khz > thresh_hi) { pr_debug("kvm: requested TSC rate %u falls outside tolerance [%u,%u]\n", user_tsc_khz, thresh_lo, thresh_hi); use_scaling = 1; } NTP daemon in the guest can correct this difference (NTP can correct upto 500ppm). Signed-off-by: Marcelo Tosatti Message-Id: <20200616114741.GA298183@fuller.cnet> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 29d9b078ce69..3b92db412335 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -4603,7 +4603,8 @@ long kvm_arch_vcpu_ioctl(struct file *filp, r = -EINVAL; user_tsc_khz = (u32)arg; - if (user_tsc_khz >= kvm_max_guest_tsc_khz) + if (kvm_has_tsc_control && + user_tsc_khz >= kvm_max_guest_tsc_khz) goto out; if (user_tsc_khz == 0) From e4553b4976d1178c13da295cb5c7b21f55baf8f9 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Tue, 16 Jun 2020 20:41:23 -0700 Subject: [PATCH 327/618] KVM: VMX: Remove vcpu_vmx's defunct copy of host_pkru Remove vcpu_vmx.host_pkru, which got left behind when PKRU support was moved to common x86 code. No functional change intended. Fixes: 37486135d3a7b ("KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c") Signed-off-by: Sean Christopherson Message-Id: <20200617034123.25647-1-sean.j.christopherson@intel.com> Reviewed-by: Vitaly Kuznetsov Reviewed-by: Jim Mattson Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx/vmx.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h index 8a83b5edc820..639798e4a6ca 100644 --- a/arch/x86/kvm/vmx/vmx.h +++ b/arch/x86/kvm/vmx/vmx.h @@ -288,8 +288,6 @@ struct vcpu_vmx { u64 current_tsc_ratio; - u32 host_pkru; - unsigned long host_debugctlmsr; /* From 73094608b8e214952444fb104651704c98a37aeb Mon Sep 17 00:00:00 2001 From: Christoffer Nielsen Date: Fri, 19 Jun 2020 13:48:22 +0200 Subject: [PATCH 328/618] ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Flight S Similar to the Kingston HyperX AMP, the Kingston HyperX Cloud Alpha S (0951:0x16ea) uses two interfaces, but only the second interface contains the capture stream. This patch delays the registration until the second interface appears. Signed-off-by: Christoffer Nielsen Cc: Link: https://lore.kernel.org/r/CAOtG2YHOM3zy+ed9KS-J4HkZo_QGzcUG9MigSp4e4_-13r6B=Q@mail.gmail.com Signed-off-by: Takashi Iwai --- sound/usb/quirks.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index c495e720e2f1..54d4b4b5bd11 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1857,6 +1857,7 @@ struct registration_quirk { static const struct registration_quirk registration_quirks[] = { REG_QUIRK_ENTRY(0x0951, 0x16d8, 2), /* Kingston HyperX AMP */ REG_QUIRK_ENTRY(0x0951, 0x16ed, 2), /* Kingston HyperX Cloud Alpha S */ + REG_QUIRK_ENTRY(0x0951, 0x16ea, 2), /* Kingston HyperX Cloud Flight S */ { 0 } /* terminator */ }; From 6c22bc18a3b93a38018844636557ad02e588e055 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 31 May 2020 11:30:24 +0200 Subject: [PATCH 329/618] drm: panel-orientation-quirks: Add quirk for Asus T101HA panel Like the Asus T100HA the Asus T101HA also uses a panel which has been mounted 90 degrees rotated, albeit in the opposite direction. Add a quirk for this. Reviewed-by: Emil Velikov Signed-off-by: Hans de Goede Link: https://patchwork.freedesktop.org/patch/msgid/20200531093025.28050-1-hdegoede@redhat.com --- drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c index ffd95bfeaa94..d11d83703931 100644 --- a/drivers/gpu/drm/drm_panel_orientation_quirks.c +++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c @@ -121,6 +121,12 @@ static const struct dmi_system_id orientation_data[] = { DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100HAN"), }, .driver_data = (void *)&asus_t100ha, + }, { /* Asus T101HA */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T101HA"), + }, + .driver_data = (void *)&lcd800x1280_rightside_up, }, { /* GPD MicroPC (generic strings, also match on bios date) */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Default string"), From a05caf9e62a85d12da27e814ac13195f4683f21c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 31 May 2020 11:30:25 +0200 Subject: [PATCH 330/618] drm: panel-orientation-quirks: Use generic orientation-data for Acer S1003 The Acer S1003 has proper DMI strings for sys-vendor and product-name, so we do not need to match by BIOS-date. This means that the Acer S1003 can use the generic lcd800x1280_rightside_up drm_dmi_panel_orientation_data struct which is also used by other quirks. Reviewed-by: Emil Velikov Signed-off-by: Hans de Goede Link: https://patchwork.freedesktop.org/patch/msgid/20200531093025.28050-2-hdegoede@redhat.com --- drivers/gpu/drm/drm_panel_orientation_quirks.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c index d11d83703931..d00ea384dcbf 100644 --- a/drivers/gpu/drm/drm_panel_orientation_quirks.c +++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c @@ -30,12 +30,6 @@ struct drm_dmi_panel_orientation_data { int orientation; }; -static const struct drm_dmi_panel_orientation_data acer_s1003 = { - .width = 800, - .height = 1280, - .orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP, -}; - static const struct drm_dmi_panel_orientation_data asus_t100ha = { .width = 800, .height = 1280, @@ -114,7 +108,7 @@ static const struct dmi_system_id orientation_data[] = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "One S1003"), }, - .driver_data = (void *)&acer_s1003, + .driver_data = (void *)&lcd800x1280_rightside_up, }, { /* Asus T100HA */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), From c95c9693b112f312b59c5d100fd09a1349970fab Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Wed, 10 Jun 2020 18:03:02 +0800 Subject: [PATCH 331/618] soc: imx8m: Correct i.MX8MP UID fuse offset Correct i.MX8MP UID fuse offset according to fuse map: UID_LOW: 0x420 UID_HIGH: 0x430 Fixes: fc40200ebf82 ("soc: imx: increase build coverage for imx8m soc driver") Fixes: 18f662a73862 ("soc: imx: Add i.MX8MP SoC driver support") Signed-off-by: Anson Huang Reviewed-by: Iuliana Prodan Signed-off-by: Shawn Guo --- drivers/soc/imx/soc-imx8m.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/soc/imx/soc-imx8m.c b/drivers/soc/imx/soc-imx8m.c index 7b0759adb47d..0bc831499bd8 100644 --- a/drivers/soc/imx/soc-imx8m.c +++ b/drivers/soc/imx/soc-imx8m.c @@ -22,6 +22,8 @@ #define OCOTP_UID_LOW 0x410 #define OCOTP_UID_HIGH 0x420 +#define IMX8MP_OCOTP_UID_OFFSET 0x10 + /* Same as ANADIG_DIGPROG_IMX7D */ #define ANADIG_DIGPROG_IMX8MM 0x800 @@ -87,6 +89,8 @@ static void __init imx8mm_soc_uid(void) { void __iomem *ocotp_base; struct device_node *np; + u32 offset = of_machine_is_compatible("fsl,imx8mp") ? + IMX8MP_OCOTP_UID_OFFSET : 0; np = of_find_compatible_node(NULL, NULL, "fsl,imx8mm-ocotp"); if (!np) @@ -95,9 +99,9 @@ static void __init imx8mm_soc_uid(void) ocotp_base = of_iomap(np, 0); WARN_ON(!ocotp_base); - soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH); + soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH + offset); soc_uid <<= 32; - soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW); + soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW + offset); iounmap(ocotp_base); of_node_put(np); From e64a1618af8566d20991607913a4d90d39b30118 Mon Sep 17 00:00:00 2001 From: Sven Schnelle Date: Wed, 17 Jun 2020 17:30:28 +0200 Subject: [PATCH 332/618] s390: fix system call single stepping When single stepping an svc instruction on s390, the kernel is entered with a PER program check interruption. The program check handler than jumps to the system call handler by reloading the PSW. The code didn't set GPR13 to the thread pointer in struct task_struct. This made the kernel access invalid memory while trying to fetch the syscall function address. Fix this by always assigned GPR13 after .Lsysc_per. Fixes: 0b0ed657fe00 ("s390: remove critical section cleanup from entry.S") Reported-and-tested-by: Christian Borntraeger Signed-off-by: Sven Schnelle Reviewed-by: Heiko Carstens Signed-off-by: Heiko Carstens --- arch/s390/kernel/entry.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 496f74d98473..969b35b177dd 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -378,9 +378,9 @@ ENTRY(system_call) stmg %r8,%r15,__LC_SAVE_AREA_SYNC BPOFF lg %r12,__LC_CURRENT - lghi %r13,__TASK_thread lghi %r14,_PIF_SYSCALL .Lsysc_per: + lghi %r13,__TASK_thread lg %r15,__LC_KERNEL_STACK la %r11,STACK_FRAME_OVERHEAD(%r15) # pointer to pt_regs UPDATE_VTIME %r8,%r9,__LC_SYNC_ENTER_TIMER From 998f5bbe3dbdab81c1cfb1aef7c3892f5d24f6c7 Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Wed, 17 Jun 2020 15:05:49 +0200 Subject: [PATCH 333/618] s390/kasan: fix early pgm check handler execution Currently if early_pgm_check_handler is called it ends up in pgm check loop. The problem is that early_pgm_check_handler is instrumented by KASAN but executed without DAT flag enabled which leads to addressing exception when KASAN checks try to access shadow memory. Fix that by executing early handlers with DAT flag on under KASAN as expected. Reported-and-tested-by: Alexander Egorenkov Reviewed-by: Heiko Carstens Signed-off-by: Vasily Gorbik Signed-off-by: Heiko Carstens --- arch/s390/kernel/early.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index cd241ee66eff..078277231858 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -170,6 +170,8 @@ static noinline __init void setup_lowcore_early(void) psw_t psw; psw.mask = PSW_MASK_BASE | PSW_DEFAULT_KEY | PSW_MASK_EA | PSW_MASK_BA; + if (IS_ENABLED(CONFIG_KASAN)) + psw.mask |= PSW_MASK_DAT; psw.addr = (unsigned long) s390_base_ext_handler; S390_lowcore.external_new_psw = psw; psw.addr = (unsigned long) s390_base_pgm_handler; From 827c4913923e0b441ba07ba4cc41e01181102303 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Tue, 31 Mar 2020 05:57:23 -0400 Subject: [PATCH 334/618] s390/debug: avoid kernel warning on too large number of pages When specifying insanely large debug buffers a kernel warning is printed. The debug code does handle the error gracefully, though. Instead of duplicating the check let us silence the warning to avoid crashes when panic_on_warn is used. Signed-off-by: Christian Borntraeger Reviewed-by: Heiko Carstens Signed-off-by: Heiko Carstens --- arch/s390/kernel/debug.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index 636446003a06..263075a1af36 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -198,9 +198,10 @@ static debug_entry_t ***debug_areas_alloc(int pages_per_area, int nr_areas) if (!areas) goto fail_malloc_areas; for (i = 0; i < nr_areas; i++) { + /* GFP_NOWARN to avoid user triggerable WARN, we handle fails */ areas[i] = kmalloc_array(pages_per_area, sizeof(debug_entry_t *), - GFP_KERNEL); + GFP_KERNEL | __GFP_NOWARN); if (!areas[i]) goto fail_malloc_areas2; for (j = 0; j < pages_per_area; j++) { From 1a2b3357e860d890f8045367b179c7e7e802cd71 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Thu, 11 Jun 2020 12:20:32 -0700 Subject: [PATCH 335/618] dma-direct: add missing set_memory_decrypted() for coherent mapping When a coherent mapping is created in dma_direct_alloc_pages(), it needs to be decrypted if the device requires unencrypted DMA before returning. Fixes: 3acac065508f ("dma-mapping: merge the generic remapping helpers into dma-direct") Signed-off-by: David Rientjes Signed-off-by: Christoph Hellwig --- kernel/dma/direct.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c index 2f69bfdbe315..93f578a8e613 100644 --- a/kernel/dma/direct.c +++ b/kernel/dma/direct.c @@ -195,6 +195,12 @@ void *dma_direct_alloc_pages(struct device *dev, size_t size, __builtin_return_address(0)); if (!ret) goto out_free_pages; + if (force_dma_unencrypted(dev)) { + err = set_memory_decrypted((unsigned long)ret, + 1 << get_order(size)); + if (err) + goto out_free_pages; + } memset(ret, 0, size); goto done; } From d07ae4c486908615ab336b987c7c367d132fd844 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 18 Jun 2020 17:23:31 +0200 Subject: [PATCH 336/618] dma-mapping: DMA_COHERENT_POOL should select GENERIC_ALLOCATOR The dma coherent pool code needs genalloc. Move the select over from DMA_REMAP, which doesn't actually need it. Fixes: dbed452a078d ("dma-pool: decouple DMA_REMAP from DMA_COHERENT_POOL") Reported-by: kernel test robot Signed-off-by: Christoph Hellwig Acked-by: David Rientjes --- kernel/dma/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/dma/Kconfig b/kernel/dma/Kconfig index 14ef8e1bdefe..1da3f44f2565 100644 --- a/kernel/dma/Kconfig +++ b/kernel/dma/Kconfig @@ -75,12 +75,12 @@ config DMA_NONCOHERENT_MMAP bool config DMA_COHERENT_POOL + select GENERIC_ALLOCATOR bool config DMA_REMAP bool depends on MMU - select GENERIC_ALLOCATOR select DMA_NONCOHERENT_MMAP config DMA_DIRECT_REMAP From 8e36baf97b252cdcafa53589e8227cbb1e85f0b0 Mon Sep 17 00:00:00 2001 From: Eric Auger Date: Tue, 23 Jun 2020 14:07:55 +0200 Subject: [PATCH 337/618] dma-remap: align the size in dma_common_*_remap() Running a guest with a virtio-iommu protecting virtio devices is broken since commit 515e5b6d90d4 ("dma-mapping: use vmap insted of reimplementing it"). Before the conversion, the size was page aligned in __get_vm_area_node(). Doing so fixes the regression. Fixes: 515e5b6d90d4 ("dma-mapping: use vmap insted of reimplementing it") Signed-off-by: Eric Auger Signed-off-by: Christoph Hellwig --- kernel/dma/remap.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/dma/remap.c b/kernel/dma/remap.c index e739a6eea6e7..78b23f089cf1 100644 --- a/kernel/dma/remap.c +++ b/kernel/dma/remap.c @@ -24,7 +24,8 @@ void *dma_common_pages_remap(struct page **pages, size_t size, { void *vaddr; - vaddr = vmap(pages, size >> PAGE_SHIFT, VM_DMA_COHERENT, prot); + vaddr = vmap(pages, PAGE_ALIGN(size) >> PAGE_SHIFT, + VM_DMA_COHERENT, prot); if (vaddr) find_vm_area(vaddr)->pages = pages; return vaddr; @@ -37,7 +38,7 @@ void *dma_common_pages_remap(struct page **pages, size_t size, void *dma_common_contiguous_remap(struct page *page, size_t size, pgprot_t prot, const void *caller) { - int count = size >> PAGE_SHIFT; + int count = PAGE_ALIGN(size) >> PAGE_SHIFT; struct page **pages; void *vaddr; int i; From 87676cfca14171fc4c99d96ae2f3e87780488ac4 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 22 Jun 2020 20:24:22 +0100 Subject: [PATCH 338/618] arm64: vdso: Disable dwarf unwinding through the sigreturn trampoline Commit 7e9f5e6629f6 ("arm64: vdso: Add --eh-frame-hdr to ldflags") results in a .eh_frame_hdr section for the vDSO, which in turn causes the libgcc unwinder to unwind out of signal handlers using the .eh_frame information populated by our .cfi directives. In conjunction with a4eb355a3fda ("arm64: vdso: Fix CFI directives in sigreturn trampoline"), this has been shown to cause segmentation faults originating from within the unwinder during thread cancellation: | Thread 14 "virtio-net-rx" received signal SIGSEGV, Segmentation fault. | 0x0000000000435e24 in uw_frame_state_for () | (gdb) bt | #0 0x0000000000435e24 in uw_frame_state_for () | #1 0x0000000000436e88 in _Unwind_ForcedUnwind_Phase2 () | #2 0x00000000004374d8 in _Unwind_ForcedUnwind () | #3 0x0000000000428400 in __pthread_unwind (buf=) at unwind.c:121 | #4 0x0000000000429808 in __do_cancel () at ./pthreadP.h:304 | #5 sigcancel_handler (sig=32, si=0xffff33c743f0, ctx=) at nptl-init.c:200 | #6 sigcancel_handler (sig=, si=0xffff33c743f0, ctx=) at nptl-init.c:165 | #7 | #8 futex_wait_cancelable (private=0, expected=0, futex_word=0x3890b708) at ../sysdeps/unix/sysv/linux/futex-internal.h:88 After considerable bashing of heads, it appears that our CFI directives for unwinding out of the sigreturn trampoline are only processed by libgcc when both a .eh_frame_hdr section is present *and* the mysterious NOP is covered by an entry in .eh_frame. With both of these now in place, it has highlighted that our CFI directives are not comprehensive enough to restore the stack pointer of the interrupted context. This results in libgcc falling back to an arm64-specific unwinder after computing a bogus PC value from the unwind tables. The unwinder promptly dereferences this bogus address in an attempt to see if the pointed-to instruction sequence looks like the sigreturn trampoline. Restore the old unwind behaviour, which relied solely on heuristics in the unwinder, by removing the .eh_frame_hdr section from the vDSO and commenting out the insufficient CFI directives for now. Add comments to explain the current, miserable state of affairs. Cc: Tamas Zsoldos Cc: Szabolcs Nagy Cc: Catalin Marinas Cc: Daniel Kiss Acked-by: Dave Martin Reviewed-by: Vincenzo Frascino Reviewed-by: Ard Biesheuvel Reported-by: Ard Biesheuvel Signed-off-by: Will Deacon --- arch/arm64/kernel/vdso/Makefile | 2 +- arch/arm64/kernel/vdso/sigreturn.S | 54 +++++++++++++++++++----------- 2 files changed, 35 insertions(+), 21 deletions(-) diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile index 556d424c6f52..1e5a940532da 100644 --- a/arch/arm64/kernel/vdso/Makefile +++ b/arch/arm64/kernel/vdso/Makefile @@ -24,7 +24,7 @@ btildflags-$(CONFIG_ARM64_BTI_KERNEL) += -z force-bti # routines, as x86 does (see 6f121e548f83 ("x86, vdso: Reimplement vdso.so # preparation in build-time C")). ldflags-y := -shared -nostdlib -soname=linux-vdso.so.1 --hash-style=sysv \ - -Bsymbolic --eh-frame-hdr --build-id -n $(btildflags-y) -T + -Bsymbolic --no-eh-frame-hdr --build-id -n $(btildflags-y) -T ccflags-y := -fno-common -fno-builtin -fno-stack-protector -ffixed-x18 ccflags-y += -DDISABLE_BRANCH_PROFILING diff --git a/arch/arm64/kernel/vdso/sigreturn.S b/arch/arm64/kernel/vdso/sigreturn.S index 620a3ef837b7..0e18729abc3b 100644 --- a/arch/arm64/kernel/vdso/sigreturn.S +++ b/arch/arm64/kernel/vdso/sigreturn.S @@ -18,29 +18,40 @@ .text +/* + * NOTE!!! You may notice that all of the .cfi directives in this file have + * been commented out. This is because they have been shown to trigger segfaults + * in libgcc when unwinding out of a SIGCANCEL handler to invoke pthread + * cleanup handlers during the thread cancellation dance. By omitting the + * directives, we trigger an arm64-specific fallback path in the unwinder which + * recognises the signal frame and restores many of the registers directly from + * the sigcontext. Re-enabling the cfi directives here therefore needs to be + * much more comprehensive to reduce the risk of further regressions. + */ + /* Ensure that the mysterious NOP can be associated with a function. */ - .cfi_startproc +// .cfi_startproc /* - * .cfi_signal_frame causes the corresponding Frame Description Entry in the - * .eh_frame section to be annotated as a signal frame. This allows DWARF - * unwinders (e.g. libstdc++) to implement _Unwind_GetIPInfo(), which permits - * unwinding out of the signal trampoline without the need for the mysterious - * NOP. + * .cfi_signal_frame causes the corresponding Frame Description Entry (FDE) in + * the .eh_frame section to be annotated as a signal frame. This allows DWARF + * unwinders (e.g. libstdc++) to implement _Unwind_GetIPInfo() and identify + * the next frame using the unmodified return address instead of subtracting 1, + * which may yield the wrong FDE. */ - .cfi_signal_frame +// .cfi_signal_frame /* * Tell the unwinder where to locate the frame record linking back to the - * interrupted context. We don't provide unwind info for registers other - * than the frame pointer and the link register here; in practice, this - * is sufficient for unwinding in C/C++ based runtimes and the values in - * the sigcontext may have been modified by this point anyway. Debuggers + * interrupted context. We don't provide unwind info for registers other than + * the frame pointer and the link register here; in practice, this is likely to + * be insufficient for unwinding in C/C++ based runtimes, especially without a + * means to restore the stack pointer. Thankfully, unwinders and debuggers * already have baked-in strategies for attempting to unwind out of signals. */ - .cfi_def_cfa x29, 0 - .cfi_offset x29, 0 * 8 - .cfi_offset x30, 1 * 8 +// .cfi_def_cfa x29, 0 +// .cfi_offset x29, 0 * 8 +// .cfi_offset x30, 1 * 8 /* * This mysterious NOP is required for some unwinders (e.g. libc++) that @@ -51,16 +62,19 @@ nop // Mysterious NOP /* - * GDB relies on being able to identify the sigreturn instruction sequence to - * unwind from signal handlers. We cannot, therefore, use SYM_FUNC_START() - * here, as it will emit a BTI C instruction and break the unwinder. Thankfully, - * this function is only ever called from a RET and so omitting the landing pad - * is perfectly fine. + * GDB, libgcc and libunwind rely on being able to identify the sigreturn + * instruction sequence to unwind from signal handlers. We cannot, therefore, + * use SYM_FUNC_START() here, as it will emit a BTI C instruction and break the + * unwinder. Thankfully, this function is only ever called from a RET and so + * omitting the landing pad is perfectly fine. */ SYM_CODE_START(__kernel_rt_sigreturn) +// PLEASE DO NOT MODIFY mov x8, #__NR_rt_sigreturn +// PLEASE DO NOT MODIFY svc #0 - .cfi_endproc +// PLEASE DO NOT MODIFY +// .cfi_endproc SYM_CODE_END(__kernel_rt_sigreturn) emit_aarch64_feature_1_and From a39060b009ca0b5b5fe0c0dab85ed437531aab52 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 22 Jun 2020 12:35:41 +0100 Subject: [PATCH 339/618] arm64: compat: Allow 32-bit vdso and sigpage to co-exist In preparation for removing the signal trampoline from the compat vDSO, allow the sigpage and the compat vDSO to co-exist. For the moment the vDSO signal trampoline will still be used when built. Subsequent patches will move to the sigpage consistently. Acked-by: Dave Martin Reviewed-by: Vincenzo Frascino Reviewed-by: Ard Biesheuvel Reviewed-by: Mark Rutland Signed-off-by: Will Deacon --- arch/arm64/include/asm/mmu.h | 3 ++ arch/arm64/kernel/Makefile | 2 -- arch/arm64/kernel/signal32.c | 2 +- arch/arm64/kernel/vdso.c | 61 +++++++++++++++++------------------- 4 files changed, 32 insertions(+), 36 deletions(-) diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h index 68140fdd89d6..8444df000181 100644 --- a/arch/arm64/include/asm/mmu.h +++ b/arch/arm64/include/asm/mmu.h @@ -19,6 +19,9 @@ typedef struct { atomic64_t id; +#ifdef CONFIG_COMPAT + void *sigpage; +#endif void *vdso; unsigned long flags; } mm_context_t; diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 151f28521f1e..a561cbb91d4d 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -29,9 +29,7 @@ $(obj)/%.stub.o: $(obj)/%.o FORCE obj-$(CONFIG_COMPAT) += sys32.o signal32.o \ sys_compat.o -ifneq ($(CONFIG_COMPAT_VDSO), y) obj-$(CONFIG_COMPAT) += sigreturn32.o -endif obj-$(CONFIG_KUSER_HELPERS) += kuser32.o obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o entry-ftrace.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c index 82feca6f7052..0aa0b33744de 100644 --- a/arch/arm64/kernel/signal32.c +++ b/arch/arm64/kernel/signal32.c @@ -371,7 +371,7 @@ static void compat_setup_return(struct pt_regs *regs, struct k_sigaction *ka, if (ka->sa.sa_flags & SA_SIGINFO) idx += 3; - retcode = (unsigned long)current->mm->context.vdso + + retcode = (unsigned long)current->mm->context.sigpage + (idx << 2) + thumb; #endif } diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c index 4e016574bd91..e546df0efefb 100644 --- a/arch/arm64/kernel/vdso.c +++ b/arch/arm64/kernel/vdso.c @@ -191,15 +191,12 @@ enum aarch32_map { #ifdef CONFIG_COMPAT_VDSO AA32_MAP_VVAR, AA32_MAP_VDSO, -#else - AA32_MAP_SIGPAGE #endif + AA32_MAP_SIGPAGE }; static struct page *aarch32_vectors_page __ro_after_init; -#ifndef CONFIG_COMPAT_VDSO static struct page *aarch32_sig_page __ro_after_init; -#endif static struct vm_special_mapping aarch32_vdso_maps[] = { [AA32_MAP_VECTORS] = { @@ -214,12 +211,11 @@ static struct vm_special_mapping aarch32_vdso_maps[] = { .name = "[vdso]", .mremap = aarch32_vdso_mremap, }, -#else +#endif /* CONFIG_COMPAT_VDSO */ [AA32_MAP_SIGPAGE] = { .name = "[sigpage]", /* ABI */ .pages = &aarch32_sig_page, }, -#endif /* CONFIG_COMPAT_VDSO */ }; static int aarch32_alloc_kuser_vdso_page(void) @@ -242,27 +238,11 @@ static int aarch32_alloc_kuser_vdso_page(void) return 0; } -#ifdef CONFIG_COMPAT_VDSO -static int __aarch32_alloc_vdso_pages(void) -{ - int ret; - - vdso_info[VDSO_ABI_AA32].dm = &aarch32_vdso_maps[AA32_MAP_VVAR]; - vdso_info[VDSO_ABI_AA32].cm = &aarch32_vdso_maps[AA32_MAP_VDSO]; - - ret = __vdso_init(VDSO_ABI_AA32); - if (ret) - return ret; - - return aarch32_alloc_kuser_vdso_page(); -} -#else -static int __aarch32_alloc_vdso_pages(void) +static int aarch32_alloc_sigpage(void) { extern char __aarch32_sigret_code_start[], __aarch32_sigret_code_end[]; int sigret_sz = __aarch32_sigret_code_end - __aarch32_sigret_code_start; unsigned long sigpage; - int ret; sigpage = get_zeroed_page(GFP_ATOMIC); if (!sigpage) @@ -271,18 +251,34 @@ static int __aarch32_alloc_vdso_pages(void) memcpy((void *)sigpage, __aarch32_sigret_code_start, sigret_sz); aarch32_sig_page = virt_to_page(sigpage); flush_dcache_page(aarch32_sig_page); + return 0; +} - ret = aarch32_alloc_kuser_vdso_page(); - if (ret) - free_page(sigpage); +#ifdef CONFIG_COMPAT_VDSO +static int __aarch32_alloc_vdso_pages(void) +{ + vdso_info[VDSO_ABI_AA32].dm = &aarch32_vdso_maps[AA32_MAP_VVAR]; + vdso_info[VDSO_ABI_AA32].cm = &aarch32_vdso_maps[AA32_MAP_VDSO]; - return ret; + return __vdso_init(VDSO_ABI_AA32); } #endif /* CONFIG_COMPAT_VDSO */ static int __init aarch32_alloc_vdso_pages(void) { - return __aarch32_alloc_vdso_pages(); + int ret; + +#ifdef CONFIG_COMPAT_VDSO + ret = __aarch32_alloc_vdso_pages(); + if (ret) + return ret; +#endif + + ret = aarch32_alloc_sigpage(); + if (ret) + return ret; + + return aarch32_alloc_kuser_vdso_page(); } arch_initcall(aarch32_alloc_vdso_pages); @@ -305,7 +301,6 @@ static int aarch32_kuser_helpers_setup(struct mm_struct *mm) return PTR_ERR_OR_ZERO(ret); } -#ifndef CONFIG_COMPAT_VDSO static int aarch32_sigreturn_setup(struct mm_struct *mm) { unsigned long addr; @@ -328,12 +323,11 @@ static int aarch32_sigreturn_setup(struct mm_struct *mm) if (IS_ERR(ret)) goto out; - mm->context.vdso = (void *)addr; + mm->context.sigpage = (void *)addr; out: return PTR_ERR_OR_ZERO(ret); } -#endif /* !CONFIG_COMPAT_VDSO */ int aarch32_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) { @@ -352,10 +346,11 @@ int aarch32_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) mm, bprm, uses_interp); -#else - ret = aarch32_sigreturn_setup(mm); + if (ret) + goto out; #endif /* CONFIG_COMPAT_VDSO */ + ret = aarch32_sigreturn_setup(mm); out: mmap_write_unlock(mm); return ret; From 8e411be6aad1387f40d60cb2c11d3260222c590b Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 22 Jun 2020 13:09:49 +0100 Subject: [PATCH 340/618] arm64: compat: Always use sigpage for sigreturn trampoline The 32-bit sigreturn trampoline in the compat sigpage matches the binary representation of the arch/arm/ sigpage exactly. This is important for debuggers (e.g. GDB) and unwinders (e.g. libunwind) since they rely on matching the instruction sequence in order to identify that they are unwinding through a signal. The same cannot be said for the sigreturn trampoline in the compat vDSO, which defeats the unwinder heuristics and instead attempts to use unwind directives for the unwinding. This is in contrast to arch/arm/, which never uses the vDSO for sigreturn. Ensure compatibility with arch/arm/ and existing unwinders by always using the sigpage for the sigreturn trampoline, regardless of the presence of the compat vDSO. Reviewed-by: Vincenzo Frascino Reviewed-by: Ard Biesheuvel Reviewed-by: Mark Rutland Signed-off-by: Will Deacon --- arch/arm64/kernel/signal32.c | 25 ------------------------- 1 file changed, 25 deletions(-) diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c index 0aa0b33744de..2f507f565c48 100644 --- a/arch/arm64/kernel/signal32.c +++ b/arch/arm64/kernel/signal32.c @@ -342,30 +342,6 @@ static void compat_setup_return(struct pt_regs *regs, struct k_sigaction *ka, retcode = ptr_to_compat(ka->sa.sa_restorer); } else { /* Set up sigreturn pointer */ -#ifdef CONFIG_COMPAT_VDSO - void *vdso_base = current->mm->context.vdso; - void *vdso_trampoline; - - if (ka->sa.sa_flags & SA_SIGINFO) { - if (thumb) { - vdso_trampoline = VDSO_SYMBOL(vdso_base, - compat_rt_sigreturn_thumb); - } else { - vdso_trampoline = VDSO_SYMBOL(vdso_base, - compat_rt_sigreturn_arm); - } - } else { - if (thumb) { - vdso_trampoline = VDSO_SYMBOL(vdso_base, - compat_sigreturn_thumb); - } else { - vdso_trampoline = VDSO_SYMBOL(vdso_base, - compat_sigreturn_arm); - } - } - - retcode = ptr_to_compat(vdso_trampoline) + thumb; -#else unsigned int idx = thumb << 1; if (ka->sa.sa_flags & SA_SIGINFO) @@ -373,7 +349,6 @@ static void compat_setup_return(struct pt_regs *regs, struct k_sigaction *ka, retcode = (unsigned long)current->mm->context.sigpage + (idx << 2) + thumb; -#endif } regs->regs[0] = usig; From 2d071968a4052e58681ace6488e2625b2a30a7f7 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 22 Jun 2020 13:13:58 +0100 Subject: [PATCH 341/618] arm64: compat: Remove 32-bit sigreturn code from the vDSO The sigreturn code in the compat vDSO is unused. Remove it. Reviewed-by: Vincenzo Frascino Reviewed-by: Ard Biesheuvel Reviewed-by: Mark Rutland Signed-off-by: Will Deacon --- arch/arm64/kernel/vdso32/Makefile | 1 - arch/arm64/kernel/vdso32/sigreturn.S | 58 ---------------------------- arch/arm64/kernel/vdso32/vdso.lds.S | 12 ------ 3 files changed, 71 deletions(-) delete mode 100644 arch/arm64/kernel/vdso32/sigreturn.S diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile index 7ea1e827e505..d88148bef6b0 100644 --- a/arch/arm64/kernel/vdso32/Makefile +++ b/arch/arm64/kernel/vdso32/Makefile @@ -140,7 +140,6 @@ hostprogs := $(munge) c-obj-vdso := note.o c-obj-vdso-gettimeofday := vgettimeofday.o -asm-obj-vdso := sigreturn.o ifneq ($(c-gettimeofday-y),) VDSO_CFLAGS_gettimeofday_o += -include $(c-gettimeofday-y) diff --git a/arch/arm64/kernel/vdso32/sigreturn.S b/arch/arm64/kernel/vdso32/sigreturn.S deleted file mode 100644 index b0091064c3d6..000000000000 --- a/arch/arm64/kernel/vdso32/sigreturn.S +++ /dev/null @@ -1,58 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * This file provides both A32 and T32 versions, in accordance with the - * arm sigreturn code. - * - * Please read the comments in arch/arm64/kernel/vdso/sigreturn.S to - * understand some of the craziness in here. - * - * Copyright (C) 2018 ARM Limited - */ - -#include -#include -#include - - .text - - .arm - .fnstart - .save {r0-r15} - .pad #COMPAT_SIGFRAME_REGS_OFFSET - nop -SYM_CODE_START(__kernel_sigreturn_arm) - mov r7, #__NR_compat_sigreturn - svc #0 - .fnend -SYM_CODE_END(__kernel_sigreturn_arm) - - .fnstart - .save {r0-r15} - .pad #COMPAT_RT_SIGFRAME_REGS_OFFSET - nop -SYM_CODE_START(__kernel_rt_sigreturn_arm) - mov r7, #__NR_compat_rt_sigreturn - svc #0 - .fnend -SYM_CODE_END(__kernel_rt_sigreturn_arm) - - .thumb - .fnstart - .save {r0-r15} - .pad #COMPAT_SIGFRAME_REGS_OFFSET - nop -SYM_CODE_START(__kernel_sigreturn_thumb) - mov r7, #__NR_compat_sigreturn - svc #0 - .fnend -SYM_CODE_END(__kernel_sigreturn_thumb) - - .fnstart - .save {r0-r15} - .pad #COMPAT_RT_SIGFRAME_REGS_OFFSET - nop -SYM_CODE_START(__kernel_rt_sigreturn_thumb) - mov r7, #__NR_compat_rt_sigreturn - svc #0 - .fnend -SYM_CODE_END(__kernel_rt_sigreturn_thumb) diff --git a/arch/arm64/kernel/vdso32/vdso.lds.S b/arch/arm64/kernel/vdso32/vdso.lds.S index a3944927eaeb..337d03522048 100644 --- a/arch/arm64/kernel/vdso32/vdso.lds.S +++ b/arch/arm64/kernel/vdso32/vdso.lds.S @@ -64,19 +64,7 @@ VERSION __vdso_clock_gettime; __vdso_gettimeofday; __vdso_clock_getres; - __kernel_sigreturn_arm; - __kernel_sigreturn_thumb; - __kernel_rt_sigreturn_arm; - __kernel_rt_sigreturn_thumb; __vdso_clock_gettime64; local: *; }; } - -/* - * Make the sigreturn code visible to the kernel. - */ -VDSO_compat_sigreturn_arm = __kernel_sigreturn_arm; -VDSO_compat_sigreturn_thumb = __kernel_sigreturn_thumb; -VDSO_compat_rt_sigreturn_arm = __kernel_rt_sigreturn_arm; -VDSO_compat_rt_sigreturn_thumb = __kernel_rt_sigreturn_thumb; From a32a1fc99807244d920d274adc46ba04b538cc8a Mon Sep 17 00:00:00 2001 From: Macpaul Lin Date: Tue, 23 Jun 2020 19:03:23 +0800 Subject: [PATCH 342/618] ALSA: usb-audio: add quirk for Samsung USBC Headset (AKG) We've found Samsung USBC Headset (AKG) (VID: 0x04e8, PID: 0xa051) need a tiny delay after each class compliant request. Otherwise the device might not be able to be recognized each times. Signed-off-by: Chihhao Chen Signed-off-by: Macpaul Lin Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1592910203-24035-1-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Takashi Iwai --- sound/usb/quirks.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 54d4b4b5bd11..fca72730a802 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1674,6 +1674,14 @@ void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe, chip->usb_id == USB_ID(0x0951, 0x16ad)) && (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) usleep_range(1000, 2000); + + /* + * Samsung USBC Headset (AKG) need a tiny delay after each + * class compliant request. (Model number: AAM625R or AAM627R) + */ + if (chip->usb_id == USB_ID(0x04e8, 0xa051) && + (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) + usleep_range(5000, 6000); } /* From 81e6737518a1e392ead4e568a4ee70bb7c371458 Mon Sep 17 00:00:00 2001 From: Chen Yu Date: Tue, 23 Jun 2020 14:31:31 +0800 Subject: [PATCH 343/618] PM: s2idle: Clear _TIF_POLLING_NRFLAG before suspend to idle Suspend to idle was found to not work on Goldmont CPU recently. The issue happens due to: 1. On Goldmont the CPU in idle can only be woken up via IPIs, not POLLING mode, due to commit 08e237fa56a1 ("x86/cpu: Add workaround for MONITOR instruction erratum on Goldmont based CPUs") 2. When the CPU is entering suspend to idle process, the _TIF_POLLING_NRFLAG remains on, because cpuidle_enter_s2idle() doesn't match call_cpuidle() exactly. 3. Commit b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()") makes use of _TIF_POLLING_NRFLAG to avoid sending IPIs to idle CPUs. 4. As a result, some IPIs related functions might not work well during suspend to idle on Goldmont. For example, one suspected victim: tick_unfreeze() -> timekeeping_resume() -> hrtimers_resume() -> clock_was_set() -> on_each_cpu() might wait forever, because the IPIs will not be sent to the CPUs which are sleeping with _TIF_POLLING_NRFLAG set, and Goldmont CPU could not be woken up by only setting _TIF_NEED_RESCHED on the monitor address. To avoid that, clear the _TIF_POLLING_NRFLAG flag before invoking enter_s2idle_proper() in cpuidle_enter_s2idle() in analogy with the call_cpuidle() code flow. Fixes: b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()") Suggested-by: Peter Zijlstra (Intel) Suggested-by: Rafael J. Wysocki Reported-by: kbuild test robot Signed-off-by: Chen Yu [ rjw: Subject / changelog ] Signed-off-by: Rafael J. Wysocki --- drivers/cpuidle/cpuidle.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index c149d9e20dfd..e092789187c6 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -186,7 +187,7 @@ int cpuidle_enter_s2idle(struct cpuidle_driver *drv, struct cpuidle_device *dev) * be frozen safely. */ index = find_deepest_state(drv, dev, U64_MAX, 0, true); - if (index > 0) + if (index > 0 && !current_clr_polling_and_test()) enter_s2idle_proper(drv, dev, index); return index; From 4dc9b282bf5fc80b1761bac467adf78cd417b777 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 19 Jun 2020 13:35:50 +0100 Subject: [PATCH 344/618] arm64: Depend on newer binutils when building PAC Versions of binutils prior to 2.33.1 don't understand the ELF notes that are added by modern compilers to indicate the PAC and BTI options used to build the code. This causes them to emit large numbers of warnings in the form: aarch64-linux-gnu-nm: warning: .tmp_vmlinux.kallsyms2: unsupported GNU_PROPERTY_TYPE (5) type: 0xc0000000 during the kernel build which is currently causing quite a bit of disruption for automated build testing using clang. In commit 15cd0e675f3f76b (arm64: Kconfig: ptrauth: Add binutils version check to fix mismatch) we added a dependency on binutils to avoid this issue when building with versions of GCC that emit the notes but did not do so for clang as it was believed that the existing check for .cfi_negate_ra_state was already requiring a new enough binutils. This does not appear to be the case for some versions of binutils (eg, the binutils in Debian 10) so instead refactor so we require a new enough GNU binutils in all cases other than when we are using an old GCC version that does not emit notes. Other, more exotic, combinations of tools are possible such as using clang, lld and gas together are possible and may have further problems but rather than adding further version checks it looks like the most robust thing will be to just test that we can build cleanly with the configured tools but that will require more review and discussion so do this for now to address the immediate problem disrupting build testing. Reported-by: KernelCI Reported-by: Nick Desaulniers Signed-off-by: Mark Brown Reviewed-by: Nick Desaulniers Link: https://github.com/ClangBuiltLinux/linux/issues/1054 Link: https://lore.kernel.org/r/20200619123550.48098-1-broonie@kernel.org Signed-off-by: Will Deacon --- arch/arm64/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 4ae2419c14a8..e391e6580bf7 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -1518,9 +1518,9 @@ config ARM64_PTR_AUTH default y depends on !KVM || ARM64_VHE depends on (CC_HAS_SIGN_RETURN_ADDRESS || CC_HAS_BRANCH_PROT_PAC_RET) && AS_HAS_PAC - # GCC 9.1 and later inserts a .note.gnu.property section note for PAC + # Modern compilers insert a .note.gnu.property section note for PAC # which is only understood by binutils starting with version 2.33.1. - depends on !CC_IS_GCC || GCC_VERSION < 90100 || LD_VERSION >= 233010000 + depends on LD_IS_LLD || LD_VERSION >= 233010000 || (CC_IS_GCC && GCC_VERSION < 90100) depends on !CC_IS_CLANG || AS_HAS_CFI_NEGATE_RA_STATE depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_REGS) help From 097350d1c6e1f5808cae142006f18a0bbc57018d Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" Date: Mon, 22 Jun 2020 15:18:15 -0400 Subject: [PATCH 345/618] ring-buffer: Zero out time extend if it is nested and not absolute Currently the ring buffer makes events that happen in interrupts that preempt another event have a delta of zero. (Hopefully we can change this soon). But this is to deal with the races of updating a global counter with lockless and nesting functions updating deltas. With the addition of absolute time stamps, the time extend didn't follow this rule. A time extend can happen if two events happen longer than 2^27 nanoseconds appart, as the delta time field in each event is only 27 bits. If that happens, then a time extend is injected with 2^59 bits of nanoseconds to use (18 years). But if the 2^27 nanoseconds happen between two events, and as it is writing the event, an interrupt triggers, it will see the 2^27 difference as well and inject a time extend of its own. But a recent change made the time extend logic not take into account the nesting, and this can cause two time extend deltas to happen moving the time stamp much further ahead than the current time. This gets all reset when the ring buffer moves to the next page, but that can cause time to appear to go backwards. This was observed in a trace-cmd recording, and since the data is saved in a file, with trace-cmd report --debug, it was possible to see that this indeed did happen! bash-52501 110d... 81778.908247: sched_switch: bash:52501 [120] S ==> swapper/110:0 [120] [12770284:0x2e8:64] -0 110d... 81778.908757: sched_switch: swapper/110:0 [120] R ==> bash:52501 [120] [509947:0x32c:64] TIME EXTEND: delta:306454770 length:0 bash-52501 110.... 81779.215212: sched_swap_numa: src_pid=52501 src_tgid=52388 src_ngid=52501 src_cpu=110 src_nid=2 dst_pid=52509 dst_tgid=52388 dst_ngid=52501 dst_cpu=49 dst_nid=1 [0:0x378:48] TIME EXTEND: delta:306458165 length:0 bash-52501 110dNh. 81779.521670: sched_wakeup: migration/110:565 [0] success=1 CPU:110 [0:0x3b4:40] and at the next page, caused the time to go backwards: bash-52504 110d... 81779.685411: sched_switch: bash:52504 [120] S ==> swapper/110:0 [120] [8347057:0xfb4:64] CPU:110 [SUBBUFFER START] [81779379165886:0x1320000] -0 110dN.. 81779.379166: sched_wakeup: bash:52504 [120] success=1 CPU:110 [0:0x10:40] -0 110d... 81779.379167: sched_switch: swapper/110:0 [120] R ==> bash:52504 [120] [1168:0x3c:64] Link: https://lkml.kernel.org/r/20200622151815.345d1bf5@oasis.local.home Cc: Ingo Molnar Cc: Andrew Morton Cc: Tom Zanussi Cc: stable@vger.kernel.org Fixes: dc4e2801d400b ("ring-buffer: Redefine the unimplemented RINGBUF_TYPE_TIME_STAMP") Reported-by: Julia Lawall Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/ring_buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index b8e1ca48be50..00867ff82412 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -2427,7 +2427,7 @@ rb_update_event(struct ring_buffer_per_cpu *cpu_buffer, if (unlikely(info->add_timestamp)) { bool abs = ring_buffer_time_stamp_abs(cpu_buffer->buffer); - event = rb_add_time_stamp(event, info->delta, abs); + event = rb_add_time_stamp(event, abs ? info->delta : delta, abs); length -= RB_LEN_TIME_EXTEND; delta = 0; } From 589bab6bb30c8cd43a7da6dcf43cc3a586cc2e25 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 12 Jun 2020 11:09:57 -0700 Subject: [PATCH 346/618] cpufreq: intel_pstate: Add one more OOB control bit Add one more bit for OOB (Out Of Band) enabling of P-states. If OOB handling of P-states is enabled, intel_pstate shouldn't load. Currently, only "BIT(8) == 1" of the MSR MSR_MISC_PWR_MGMT is considered as OOB, but "BIT(18) == 1" needs to be taken into consideration as OOB condition too. Signed-off-by: Srinivas Pandruvada [ rjw: Add an empty code line, edit subject and changelog ] Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 8e23a698ce04..e771e8b4f99f 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -2677,6 +2677,8 @@ static struct acpi_platform_list plat_info[] __initdata = { { } /* End */ }; +#define BITMASK_OOB (BIT(8) | BIT(18)) + static bool __init intel_pstate_platform_pwr_mgmt_exists(void) { const struct x86_cpu_id *id; @@ -2686,8 +2688,9 @@ static bool __init intel_pstate_platform_pwr_mgmt_exists(void) id = x86_match_cpu(intel_pstate_cpu_oob_ids); if (id) { rdmsrl(MSR_MISC_PWR_MGMT, misc_pwr); - if (misc_pwr & (1 << 8)) { - pr_debug("Bit 8 in the MISC_PWR_MGMT MSR set\n"); + if (misc_pwr & BITMASK_OOB) { + pr_debug("Bit 8 or 18 in the MISC_PWR_MGMT MSR set\n"); + pr_debug("P states are controlled in Out of Band mode by the firmware/hardware\n"); return true; } } From 0659d4205db4d0225efd8f83291cbacfcdea030c Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 21 Jun 2020 10:18:54 +0200 Subject: [PATCH 347/618] PM: sleep: core: mark 2 functions as __init to save some memory 'early_resume_init()' and 'late_resume_init() 'are only called respectively via 'early_resume_init' and 'late_resume_init'. They can be marked as __init to save a few bytes of memory. Signed-off-by: Christophe JAILLET [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki --- drivers/base/power/trace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/base/power/trace.c b/drivers/base/power/trace.c index 977d27bd1a22..a97f33d0c59f 100644 --- a/drivers/base/power/trace.c +++ b/drivers/base/power/trace.c @@ -265,14 +265,14 @@ static struct notifier_block pm_trace_nb = { .notifier_call = pm_trace_notify, }; -static int early_resume_init(void) +static int __init early_resume_init(void) { hash_value_early_read = read_magic_time(); register_pm_notifier(&pm_trace_nb); return 0; } -static int late_resume_init(void) +static int __init late_resume_init(void) { unsigned int val = hash_value_early_read; unsigned int user, file, dev; From 95a3d8f3af9b0d63b43f221b630beaab9739d13a Mon Sep 17 00:00:00 2001 From: Zhang Xiaoxu Date: Mon, 22 Jun 2020 05:30:19 -0400 Subject: [PATCH 348/618] cifs: Fix double add page to memcg when cifs_readpages When xfstests generic/451, there is an BUG at mm/memcontrol.c: page:ffffea000560f2c0 refcount:2 mapcount:0 mapping:000000008544e0ea index:0xf mapping->aops:cifs_addr_ops dentry name:"tst-aio-dio-cycle-write.451" flags: 0x2fffff80000001(locked) raw: 002fffff80000001 ffffc90002023c50 ffffea0005280088 ffff88815cda0210 raw: 000000000000000f 0000000000000000 00000002ffffffff ffff88817287d000 page dumped because: VM_BUG_ON_PAGE(page->mem_cgroup) page->mem_cgroup:ffff88817287d000 ------------[ cut here ]------------ kernel BUG at mm/memcontrol.c:2659! invalid opcode: 0000 [#1] SMP CPU: 2 PID: 2038 Comm: xfs_io Not tainted 5.8.0-rc1 #44 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_ 073836-buildvm-ppc64le-16.ppc.4 RIP: 0010:commit_charge+0x35/0x50 Code: 0d 48 83 05 54 b2 02 05 01 48 89 77 38 c3 48 c7 c6 78 4a ea ba 48 83 05 38 b2 02 05 01 e8 63 0d9 RSP: 0018:ffffc90002023a50 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff88817287d000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88817ac97ea0 RDI: ffff88817ac97ea0 RBP: ffffea000560f2c0 R08: 0000000000000203 R09: 0000000000000005 R10: 0000000000000030 R11: ffffc900020237a8 R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000000001 R15: ffff88815a1272c0 FS: 00007f5071ab0800(0000) GS:ffff88817ac80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055efcd5ca000 CR3: 000000015d312000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mem_cgroup_charge+0x166/0x4f0 __add_to_page_cache_locked+0x4a9/0x710 add_to_page_cache_locked+0x15/0x20 cifs_readpages+0x217/0x1270 read_pages+0x29a/0x670 page_cache_readahead_unbounded+0x24f/0x390 __do_page_cache_readahead+0x3f/0x60 ondemand_readahead+0x1f1/0x470 page_cache_async_readahead+0x14c/0x170 generic_file_buffered_read+0x5df/0x1100 generic_file_read_iter+0x10c/0x1d0 cifs_strict_readv+0x139/0x170 new_sync_read+0x164/0x250 __vfs_read+0x39/0x60 vfs_read+0xb5/0x1e0 ksys_pread64+0x85/0xf0 __x64_sys_pread64+0x22/0x30 do_syscall_64+0x69/0x150 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f5071fcb1af Code: Bad RIP value. RSP: 002b:00007ffde2cdb8e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000011 RAX: ffffffffffffffda RBX: 00007ffde2cdb990 RCX: 00007f5071fcb1af RDX: 0000000000001000 RSI: 000055efcd5ca000 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000001000 R11: 0000000000000293 R12: 0000000000000001 R13: 000000000009f000 R14: 0000000000000000 R15: 0000000000001000 Modules linked in: ---[ end trace 725fa14a3e1af65c ]--- Since commit 3fea5a499d57 ("mm: memcontrol: convert page cache to a new mem_cgroup_charge() API") not cancel the page charge, the pages maybe double add to pagecache: thread1 | thread2 cifs_readpages readpages_get_pages add_to_page_cache_locked(head,index=n)=0 | readpages_get_pages | add_to_page_cache_locked(head,index=n+1)=0 add_to_page_cache_locked(head, index=n+1)=-EEXIST then, will next loop with list head page's index=n+1 and the page->mapping not NULL readpages_get_pages add_to_page_cache_locked(head, index=n+1) commit_charge VM_BUG_ON_PAGE So, we should not do the next loop when any page add to page cache failed. Reported-by: Hulk Robot Signed-off-by: Zhang Xiaoxu Signed-off-by: Steve French Acked-by: Ronnie Sahlberg --- fs/cifs/file.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 4fe757cfc360..9b0f8f33f832 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -4336,7 +4336,8 @@ readpages_get_pages(struct address_space *mapping, struct list_head *page_list, break; __SetPageLocked(page); - if (add_to_page_cache_locked(page, mapping, page->index, gfp)) { + rc = add_to_page_cache_locked(page, mapping, page->index, gfp); + if (rc) { __ClearPageLocked(page); break; } @@ -4352,6 +4353,7 @@ static int cifs_readpages(struct file *file, struct address_space *mapping, struct list_head *page_list, unsigned num_pages) { int rc; + int err = 0; struct list_head tmplist; struct cifsFileInfo *open_file = file->private_data; struct cifs_sb_info *cifs_sb = CIFS_FILE_SB(file); @@ -4396,7 +4398,7 @@ static int cifs_readpages(struct file *file, struct address_space *mapping, * the order of declining indexes. When we put the pages in * the rdata->pages, then we want them in increasing order. */ - while (!list_empty(page_list)) { + while (!list_empty(page_list) && !err) { unsigned int i, nr_pages, bytes, rsize; loff_t offset; struct page *page, *tpage; @@ -4429,9 +4431,10 @@ static int cifs_readpages(struct file *file, struct address_space *mapping, return 0; } - rc = readpages_get_pages(mapping, page_list, rsize, &tmplist, + nr_pages = 0; + err = readpages_get_pages(mapping, page_list, rsize, &tmplist, &nr_pages, &offset, &bytes); - if (rc) { + if (!nr_pages) { add_credits_and_wake_if(server, credits, 0); break; } From 842ec61f4006a6477a9deaedd69131e9f46e4cb5 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 13 May 2020 16:07:24 +0200 Subject: [PATCH 349/618] drm/sun4i: mixer: Call of_dma_configure if there's an IOMMU The main DRM device is actually a virtual device so it doesn't have the iommus property, which is instead on the DMA masters, in this case the mixers. Add a call to of_dma_configure with the mixers DT node but on the DRM virtual device to configure it in the same way than the mixers. Reviewed-by: Paul Kocialkowski Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/9a4daf438dd3f2fe07afb23688bfb793a0613d7d.1589378833.git-series.maxime@cerno.tech (cherry picked from commit b718102dbdfd0285ad559687a30e27cc9124e592) [Maxime: Applied to -fixes since it missed the merge window and display is broken without it] Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun8i_mixer.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c b/drivers/gpu/drm/sun4i/sun8i_mixer.c index 56cc037fd312..cc4fb916318f 100644 --- a/drivers/gpu/drm/sun4i/sun8i_mixer.c +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c @@ -363,6 +363,19 @@ static int sun8i_mixer_bind(struct device *dev, struct device *master, mixer->engine.ops = &sun8i_engine_ops; mixer->engine.node = dev->of_node; + if (of_find_property(dev->of_node, "iommus", NULL)) { + /* + * This assume we have the same DMA constraints for + * all our the mixers in our pipeline. This sounds + * bad, but it has always been the case for us, and + * DRM doesn't do per-device allocation either, so we + * would need to fix DRM first... + */ + ret = of_dma_configure(drm->dev, dev->of_node, true); + if (ret) + return ret; + } + /* * While this function can fail, we shouldn't do anything * if this happens. Some early DE2 DT entries don't provide From b772f07add1c0b22e02c0f1e96f647560679d3a9 Mon Sep 17 00:00:00 2001 From: Xuan Zhuo Date: Tue, 23 Jun 2020 19:34:06 +0800 Subject: [PATCH 350/618] io_uring: fix io_sq_thread no schedule when busy When the user consumes and generates sqe at a fast rate, io_sqring_entries can always get sqe, and ret will not be equal to -EBUSY, so that io_sq_thread will never call cond_resched or schedule, and then we will get the following system error prompt: rcu: INFO: rcu_sched self-detected stall on CPU or watchdog: BUG: soft lockup-CPU#23 stuck for 112s! [io_uring-sq:1863] This patch checks whether need to call cond_resched() by checking the need_resched() function every cycle. Suggested-by: Jens Axboe Signed-off-by: Xuan Zhuo Signed-off-by: Jens Axboe --- fs/io_uring.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index a78201b96179..9de9db70b928 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -6011,7 +6011,7 @@ static int io_sq_thread(void *data) * If submit got -EBUSY, flag us as needing the application * to enter the kernel to reap and flush events. */ - if (!to_submit || ret == -EBUSY) { + if (!to_submit || ret == -EBUSY || need_resched()) { /* * Drop cur_mm before scheduling, we can't hold it for * long periods (or over schedule()). Do this before @@ -6027,7 +6027,7 @@ static int io_sq_thread(void *data) * more IO, we should wait for the application to * reap events and wake us up. */ - if (!list_empty(&ctx->poll_list) || + if (!list_empty(&ctx->poll_list) || need_resched() || (!time_after(jiffies, timeout) && ret != -EBUSY && !percpu_ref_is_dying(&ctx->refs))) { if (current->task_works) From 852f71942ce71fd9a2bb25667bda53afeb97dcb6 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 23 Jun 2020 12:15:01 +0300 Subject: [PATCH 351/618] i2c: designware: Adjust bus speed independently of ACPI John Stultz reported that commit f9288fcc5c615 ("i2c: designware: Move ACPI parts into common module") caused a regression on the HiKey board where adv7511 HDMI bridge driver wasn't probing anymore due the I2C bus failed to start. It seems the change caused the bus speed being zero when CONFIG_ACPI not set and neither speed based on "clock-frequency" device property or default fast mode is set. Fix this by splitting i2c_dw_acpi_adjust_bus_speed() to i2c_dw_acpi_round_bus_speed() and i2c_dw_adjust_bus_speed(), where the latter one has the code that runs independently of ACPI. Fixes: f9288fcc5c615 ("i2c: designware: Move ACPI parts into common module") Reported-by: John Stultz Signed-off-by: Andy Shevchenko Acked-by: Jarkko Nikula Tested-by: John Stultz Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-common.c | 25 ++++++++++++++------- drivers/i2c/busses/i2c-designware-core.h | 3 +-- drivers/i2c/busses/i2c-designware-pcidrv.c | 2 +- drivers/i2c/busses/i2c-designware-platdrv.c | 2 +- 4 files changed, 20 insertions(+), 12 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c index e3a8640db7da..3c19aada4b30 100644 --- a/drivers/i2c/busses/i2c-designware-common.c +++ b/drivers/i2c/busses/i2c-designware-common.c @@ -286,10 +286,8 @@ int i2c_dw_acpi_configure(struct device *device) } EXPORT_SYMBOL_GPL(i2c_dw_acpi_configure); -void i2c_dw_acpi_adjust_bus_speed(struct device *device) +static u32 i2c_dw_acpi_round_bus_speed(struct device *device) { - struct dw_i2c_dev *dev = dev_get_drvdata(device); - struct i2c_timings *t = &dev->timings; u32 acpi_speed; int i; @@ -300,9 +298,22 @@ void i2c_dw_acpi_adjust_bus_speed(struct device *device) */ for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) { if (acpi_speed >= supported_speeds[i]) - break; + return supported_speeds[i]; } - acpi_speed = i < ARRAY_SIZE(supported_speeds) ? supported_speeds[i] : 0; + + return 0; +} + +#else /* CONFIG_ACPI */ + +static inline u32 i2c_dw_acpi_round_bus_speed(struct device *device) { return 0; } + +#endif /* CONFIG_ACPI */ + +void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev) +{ + u32 acpi_speed = i2c_dw_acpi_round_bus_speed(dev->dev); + struct i2c_timings *t = &dev->timings; /* * Find bus speed from the "clock-frequency" device property, ACPI @@ -315,9 +326,7 @@ void i2c_dw_acpi_adjust_bus_speed(struct device *device) else t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ; } -EXPORT_SYMBOL_GPL(i2c_dw_acpi_adjust_bus_speed); - -#endif /* CONFIG_ACPI */ +EXPORT_SYMBOL_GPL(i2c_dw_adjust_bus_speed); u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset) { diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 556673a1f61b..eb5ef4d0f463 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -361,11 +361,10 @@ static inline int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) { return 0; #endif int i2c_dw_validate_speed(struct dw_i2c_dev *dev); +void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev); #if IS_ENABLED(CONFIG_ACPI) int i2c_dw_acpi_configure(struct device *device); -void i2c_dw_acpi_adjust_bus_speed(struct device *device); #else static inline int i2c_dw_acpi_configure(struct device *device) { return -ENODEV; } -static inline void i2c_dw_acpi_adjust_bus_speed(struct device *device) {} #endif diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 947c096f86e3..8522134f9ea9 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -240,7 +240,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, } } - i2c_dw_acpi_adjust_bus_speed(&pdev->dev); + i2c_dw_adjust_bus_speed(dev); if (has_acpi_companion(&pdev->dev)) i2c_dw_acpi_configure(&pdev->dev); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 0de4e302fc6a..c2efaaaac252 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -228,7 +228,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) else i2c_parse_fw_timings(&pdev->dev, t, false); - i2c_dw_acpi_adjust_bus_speed(&pdev->dev); + i2c_dw_adjust_bus_speed(dev); if (pdev->dev.of_node) dw_i2c_of_configure(pdev); From 2464bc7c2897b7549146a743045089d3aea7b85b Mon Sep 17 00:00:00 2001 From: Horatiu Vultur Date: Tue, 23 Jun 2020 11:05:40 +0200 Subject: [PATCH 352/618] bridge: uapi: mrp: Fix MRP_PORT_ROLE Currently the MRP_PORT_ROLE_NONE has the value 0x2 but this is in conflict with the IEC 62439-2 standard. The standard defines the following port roles: primary (0x0), secondary(0x1), interconnect(0x2). Therefore remove the port role none. Fixes: 4714d13791f831 ("bridge: uapi: mrp: Add mrp attributes.") Signed-off-by: Horatiu Vultur Signed-off-by: David S. Miller --- include/uapi/linux/mrp_bridge.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/uapi/linux/mrp_bridge.h b/include/uapi/linux/mrp_bridge.h index 84f15f48a7cb..bee366540212 100644 --- a/include/uapi/linux/mrp_bridge.h +++ b/include/uapi/linux/mrp_bridge.h @@ -36,7 +36,6 @@ enum br_mrp_port_state_type { enum br_mrp_port_role_type { BR_MRP_PORT_ROLE_PRIMARY, BR_MRP_PORT_ROLE_SECONDARY, - BR_MRP_PORT_ROLE_NONE, }; enum br_mrp_tlv_header_type { From 7882c895b71b8cd6c81946fcc8e13d15a2841de7 Mon Sep 17 00:00:00 2001 From: Horatiu Vultur Date: Tue, 23 Jun 2020 11:05:41 +0200 Subject: [PATCH 353/618] bridge: mrp: Validate when setting the port role This patch adds specific checks for primary(0x0) and secondary(0x1) when setting the port role. For any other value the function 'br_mrp_set_port_role' will return -EINVAL. Fixes: 20f6a05ef63594 ("bridge: mrp: Rework the MRP netlink interface") Signed-off-by: Horatiu Vultur Signed-off-by: David S. Miller --- net/bridge/br_mrp.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/net/bridge/br_mrp.c b/net/bridge/br_mrp.c index 24986ec7d38c..779e1eb75443 100644 --- a/net/bridge/br_mrp.c +++ b/net/bridge/br_mrp.c @@ -411,10 +411,16 @@ int br_mrp_set_port_role(struct net_bridge_port *p, if (!mrp) return -EINVAL; - if (role == BR_MRP_PORT_ROLE_PRIMARY) + switch (role) { + case BR_MRP_PORT_ROLE_PRIMARY: rcu_assign_pointer(mrp->p_port, p); - else + break; + case BR_MRP_PORT_ROLE_SECONDARY: rcu_assign_pointer(mrp->s_port, p); + break; + default: + return -EINVAL; + } br_mrp_port_switchdev_set_role(p, role); From 558b353c9c2a717509f291c066c6bd8f5f5e21be Mon Sep 17 00:00:00 2001 From: Frank Werner-Krippendorf Date: Tue, 23 Jun 2020 03:59:44 -0600 Subject: [PATCH 354/618] wireguard: noise: do not assign initiation time in if condition Fixes an error condition reported by checkpatch.pl which caused by assigning a variable in an if condition in wg_noise_handshake_consume_ initiation(). Signed-off-by: Frank Werner-Krippendorf Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller --- drivers/net/wireguard/noise.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireguard/noise.c b/drivers/net/wireguard/noise.c index 626433690abb..201a22681945 100644 --- a/drivers/net/wireguard/noise.c +++ b/drivers/net/wireguard/noise.c @@ -617,8 +617,8 @@ wg_noise_handshake_consume_initiation(struct message_handshake_initiation *src, memcpy(handshake->hash, hash, NOISE_HASH_LEN); memcpy(handshake->chaining_key, chaining_key, NOISE_HASH_LEN); handshake->remote_index = src->sender_index; - if ((s64)(handshake->last_initiation_consumption - - (initiation_consumption = ktime_get_coarse_boottime_ns())) < 0) + initiation_consumption = ktime_get_coarse_boottime_ns(); + if ((s64)(handshake->last_initiation_consumption - initiation_consumption) < 0) handshake->last_initiation_consumption = initiation_consumption; handshake->state = HANDSHAKE_CONSUMED_INITIATION; up_write(&handshake->lock); From 900575aa33a3eaaef802b31de187a85c4a4b4bd0 Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Tue, 23 Jun 2020 03:59:45 -0600 Subject: [PATCH 355/618] wireguard: device: avoid circular netns references Before, we took a reference to the creating netns if the new netns was different. This caused issues with circular references, with two wireguard interfaces swapping namespaces. The solution is to rather not take any extra references at all, but instead simply invalidate the creating netns pointer when that netns is deleted. In order to prevent this from happening again, this commit improves the rough object leak tracking by allowing it to account for created and destroyed interfaces, aside from just peers and keys. That then makes it possible to check for the object leak when having two interfaces take a reference to each others' namespaces. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller --- drivers/net/wireguard/device.c | 58 ++++++++++------------ drivers/net/wireguard/device.h | 3 +- drivers/net/wireguard/netlink.c | 14 ++++-- drivers/net/wireguard/socket.c | 25 +++++++--- tools/testing/selftests/wireguard/netns.sh | 13 ++++- 5 files changed, 67 insertions(+), 46 deletions(-) diff --git a/drivers/net/wireguard/device.c b/drivers/net/wireguard/device.c index 3ac3f8570ca1..a8f151b1b5fa 100644 --- a/drivers/net/wireguard/device.c +++ b/drivers/net/wireguard/device.c @@ -45,17 +45,18 @@ static int wg_open(struct net_device *dev) if (dev_v6) dev_v6->cnf.addr_gen_mode = IN6_ADDR_GEN_MODE_NONE; + mutex_lock(&wg->device_update_lock); ret = wg_socket_init(wg, wg->incoming_port); if (ret < 0) - return ret; - mutex_lock(&wg->device_update_lock); + goto out; list_for_each_entry(peer, &wg->peer_list, peer_list) { wg_packet_send_staged_packets(peer); if (peer->persistent_keepalive_interval) wg_packet_send_keepalive(peer); } +out: mutex_unlock(&wg->device_update_lock); - return 0; + return ret; } #ifdef CONFIG_PM_SLEEP @@ -225,6 +226,7 @@ static void wg_destruct(struct net_device *dev) list_del(&wg->device_list); rtnl_unlock(); mutex_lock(&wg->device_update_lock); + rcu_assign_pointer(wg->creating_net, NULL); wg->incoming_port = 0; wg_socket_reinit(wg, NULL, NULL); /* The final references are cleared in the below calls to destroy_workqueue. */ @@ -240,13 +242,11 @@ static void wg_destruct(struct net_device *dev) skb_queue_purge(&wg->incoming_handshakes); free_percpu(dev->tstats); free_percpu(wg->incoming_handshakes_worker); - if (wg->have_creating_net_ref) - put_net(wg->creating_net); kvfree(wg->index_hashtable); kvfree(wg->peer_hashtable); mutex_unlock(&wg->device_update_lock); - pr_debug("%s: Interface deleted\n", dev->name); + pr_debug("%s: Interface destroyed\n", dev->name); free_netdev(dev); } @@ -292,7 +292,7 @@ static int wg_newlink(struct net *src_net, struct net_device *dev, struct wg_device *wg = netdev_priv(dev); int ret = -ENOMEM; - wg->creating_net = src_net; + rcu_assign_pointer(wg->creating_net, src_net); init_rwsem(&wg->static_identity.lock); mutex_init(&wg->socket_update_lock); mutex_init(&wg->device_update_lock); @@ -393,30 +393,26 @@ static struct rtnl_link_ops link_ops __read_mostly = { .newlink = wg_newlink, }; -static int wg_netdevice_notification(struct notifier_block *nb, - unsigned long action, void *data) +static void wg_netns_pre_exit(struct net *net) { - struct net_device *dev = ((struct netdev_notifier_info *)data)->dev; - struct wg_device *wg = netdev_priv(dev); + struct wg_device *wg; - ASSERT_RTNL(); - - if (action != NETDEV_REGISTER || dev->netdev_ops != &netdev_ops) - return 0; - - if (dev_net(dev) == wg->creating_net && wg->have_creating_net_ref) { - put_net(wg->creating_net); - wg->have_creating_net_ref = false; - } else if (dev_net(dev) != wg->creating_net && - !wg->have_creating_net_ref) { - wg->have_creating_net_ref = true; - get_net(wg->creating_net); + rtnl_lock(); + list_for_each_entry(wg, &device_list, device_list) { + if (rcu_access_pointer(wg->creating_net) == net) { + pr_debug("%s: Creating namespace exiting\n", wg->dev->name); + netif_carrier_off(wg->dev); + mutex_lock(&wg->device_update_lock); + rcu_assign_pointer(wg->creating_net, NULL); + wg_socket_reinit(wg, NULL, NULL); + mutex_unlock(&wg->device_update_lock); + } } - return 0; + rtnl_unlock(); } -static struct notifier_block netdevice_notifier = { - .notifier_call = wg_netdevice_notification +static struct pernet_operations pernet_ops = { + .pre_exit = wg_netns_pre_exit }; int __init wg_device_init(void) @@ -429,18 +425,18 @@ int __init wg_device_init(void) return ret; #endif - ret = register_netdevice_notifier(&netdevice_notifier); + ret = register_pernet_device(&pernet_ops); if (ret) goto error_pm; ret = rtnl_link_register(&link_ops); if (ret) - goto error_netdevice; + goto error_pernet; return 0; -error_netdevice: - unregister_netdevice_notifier(&netdevice_notifier); +error_pernet: + unregister_pernet_device(&pernet_ops); error_pm: #ifdef CONFIG_PM_SLEEP unregister_pm_notifier(&pm_notifier); @@ -451,7 +447,7 @@ int __init wg_device_init(void) void wg_device_uninit(void) { rtnl_link_unregister(&link_ops); - unregister_netdevice_notifier(&netdevice_notifier); + unregister_pernet_device(&pernet_ops); #ifdef CONFIG_PM_SLEEP unregister_pm_notifier(&pm_notifier); #endif diff --git a/drivers/net/wireguard/device.h b/drivers/net/wireguard/device.h index b15a8be9d816..4d0144e16947 100644 --- a/drivers/net/wireguard/device.h +++ b/drivers/net/wireguard/device.h @@ -40,7 +40,7 @@ struct wg_device { struct net_device *dev; struct crypt_queue encrypt_queue, decrypt_queue; struct sock __rcu *sock4, *sock6; - struct net *creating_net; + struct net __rcu *creating_net; struct noise_static_identity static_identity; struct workqueue_struct *handshake_receive_wq, *handshake_send_wq; struct workqueue_struct *packet_crypt_wq; @@ -56,7 +56,6 @@ struct wg_device { unsigned int num_peers, device_update_gen; u32 fwmark; u16 incoming_port; - bool have_creating_net_ref; }; int wg_device_init(void); diff --git a/drivers/net/wireguard/netlink.c b/drivers/net/wireguard/netlink.c index 802099c8828a..20a4f3c0a0a1 100644 --- a/drivers/net/wireguard/netlink.c +++ b/drivers/net/wireguard/netlink.c @@ -511,11 +511,15 @@ static int wg_set_device(struct sk_buff *skb, struct genl_info *info) if (flags & ~__WGDEVICE_F_ALL) goto out; - ret = -EPERM; - if ((info->attrs[WGDEVICE_A_LISTEN_PORT] || - info->attrs[WGDEVICE_A_FWMARK]) && - !ns_capable(wg->creating_net->user_ns, CAP_NET_ADMIN)) - goto out; + if (info->attrs[WGDEVICE_A_LISTEN_PORT] || info->attrs[WGDEVICE_A_FWMARK]) { + struct net *net; + rcu_read_lock(); + net = rcu_dereference(wg->creating_net); + ret = !net || !ns_capable(net->user_ns, CAP_NET_ADMIN) ? -EPERM : 0; + rcu_read_unlock(); + if (ret) + goto out; + } ++wg->device_update_gen; diff --git a/drivers/net/wireguard/socket.c b/drivers/net/wireguard/socket.c index f9018027fc13..c33e2c81635f 100644 --- a/drivers/net/wireguard/socket.c +++ b/drivers/net/wireguard/socket.c @@ -347,6 +347,7 @@ static void set_sock_opts(struct socket *sock) int wg_socket_init(struct wg_device *wg, u16 port) { + struct net *net; int ret; struct udp_tunnel_sock_cfg cfg = { .sk_user_data = wg, @@ -371,37 +372,47 @@ int wg_socket_init(struct wg_device *wg, u16 port) }; #endif + rcu_read_lock(); + net = rcu_dereference(wg->creating_net); + net = net ? maybe_get_net(net) : NULL; + rcu_read_unlock(); + if (unlikely(!net)) + return -ENONET; + #if IS_ENABLED(CONFIG_IPV6) retry: #endif - ret = udp_sock_create(wg->creating_net, &port4, &new4); + ret = udp_sock_create(net, &port4, &new4); if (ret < 0) { pr_err("%s: Could not create IPv4 socket\n", wg->dev->name); - return ret; + goto out; } set_sock_opts(new4); - setup_udp_tunnel_sock(wg->creating_net, new4, &cfg); + setup_udp_tunnel_sock(net, new4, &cfg); #if IS_ENABLED(CONFIG_IPV6) if (ipv6_mod_enabled()) { port6.local_udp_port = inet_sk(new4->sk)->inet_sport; - ret = udp_sock_create(wg->creating_net, &port6, &new6); + ret = udp_sock_create(net, &port6, &new6); if (ret < 0) { udp_tunnel_sock_release(new4); if (ret == -EADDRINUSE && !port && retries++ < 100) goto retry; pr_err("%s: Could not create IPv6 socket\n", wg->dev->name); - return ret; + goto out; } set_sock_opts(new6); - setup_udp_tunnel_sock(wg->creating_net, new6, &cfg); + setup_udp_tunnel_sock(net, new6, &cfg); } #endif wg_socket_reinit(wg, new4->sk, new6 ? new6->sk : NULL); - return 0; + ret = 0; +out: + put_net(net); + return ret; } void wg_socket_reinit(struct wg_device *wg, struct sock *new4, diff --git a/tools/testing/selftests/wireguard/netns.sh b/tools/testing/selftests/wireguard/netns.sh index 17a1f53ceba0..d77f4829f1e0 100755 --- a/tools/testing/selftests/wireguard/netns.sh +++ b/tools/testing/selftests/wireguard/netns.sh @@ -587,9 +587,20 @@ ip0 link set wg0 up kill $ncat_pid ip0 link del wg0 +# Ensure there aren't circular reference loops +ip1 link add wg1 type wireguard +ip2 link add wg2 type wireguard +ip1 link set wg1 netns $netns2 +ip2 link set wg2 netns $netns1 +pp ip netns delete $netns1 +pp ip netns delete $netns2 +pp ip netns add $netns1 +pp ip netns add $netns2 + +sleep 2 # Wait for cleanup and grace periods declare -A objects while read -t 0.1 -r line 2>/dev/null || [[ $? -ne 142 ]]; do - [[ $line =~ .*(wg[0-9]+:\ [A-Z][a-z]+\ [0-9]+)\ .*(created|destroyed).* ]] || continue + [[ $line =~ .*(wg[0-9]+:\ [A-Z][a-z]+\ ?[0-9]*)\ .*(created|destroyed).* ]] || continue objects["${BASH_REMATCH[1]}"]+="${BASH_REMATCH[2]}" done < /dev/kmsg alldeleted=1 From b4730ae6a443afe611afb4fb651c885c51003c15 Mon Sep 17 00:00:00 2001 From: Alexander Lobakin Date: Tue, 23 Jun 2020 10:43:48 +0000 Subject: [PATCH 356/618] net: ethtool: add missing string for NETIF_F_GSO_TUNNEL_REMCSUM Commit e585f2363637 ("udp: Changes to udp_offload to support remote checksum offload") added new GSO type and a corresponding netdev feature, but missed Ethtool's 'netdev_features_strings' table. Give it a name so it will be exposed to userspace and become available for manual configuration. v3: - decouple from "netdev_features_strings[] cleanup" series; - no functional changes. v2: - don't split the "Fixes:" tag across lines; - no functional changes. Fixes: e585f2363637 ("udp: Changes to udp_offload to support remote checksum offload") Signed-off-by: Alexander Lobakin Signed-off-by: David S. Miller --- net/ethtool/common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ethtool/common.c b/net/ethtool/common.c index 47f63526818e..aaecfc916a4d 100644 --- a/net/ethtool/common.c +++ b/net/ethtool/common.c @@ -40,6 +40,7 @@ const char netdev_features_strings[NETDEV_FEATURE_COUNT][ETH_GSTRING_LEN] = { [NETIF_F_GSO_UDP_TUNNEL_BIT] = "tx-udp_tnl-segmentation", [NETIF_F_GSO_UDP_TUNNEL_CSUM_BIT] = "tx-udp_tnl-csum-segmentation", [NETIF_F_GSO_PARTIAL_BIT] = "tx-gso-partial", + [NETIF_F_GSO_TUNNEL_REMCSUM_BIT] = "tx-tunnel-remcsum-segmentation", [NETIF_F_GSO_SCTP_BIT] = "tx-sctp-segmentation", [NETIF_F_GSO_ESP_BIT] = "tx-esp-segmentation", [NETIF_F_GSO_UDP_L4_BIT] = "tx-udp-segmentation", From 97dd1abd026ae4e6a82fa68645928404ad483409 Mon Sep 17 00:00:00 2001 From: Alexander Lobakin Date: Tue, 23 Jun 2020 16:51:29 +0300 Subject: [PATCH 357/618] net: qed: fix left elements count calculation qed_chain_get_element_left{,_u32} returned 0 when the difference between producer and consumer page count was equal to the total page count. Fix this by conditional expanding of producer value (vs unconditional). This allowed to eliminate normalizaton against total page count, which was the cause of this bug. Misc: replace open-coded constants with common defines. Fixes: a91eb52abb50 ("qed: Revisit chain implementation") Signed-off-by: Alexander Lobakin Signed-off-by: Igor Russkikh Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- include/linux/qed/qed_chain.h | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/include/linux/qed/qed_chain.h b/include/linux/qed/qed_chain.h index 733fad7dfbed..6d15040c642c 100644 --- a/include/linux/qed/qed_chain.h +++ b/include/linux/qed/qed_chain.h @@ -207,28 +207,34 @@ static inline u32 qed_chain_get_cons_idx_u32(struct qed_chain *p_chain) static inline u16 qed_chain_get_elem_left(struct qed_chain *p_chain) { + u16 elem_per_page = p_chain->elem_per_page; + u32 prod = p_chain->u.chain16.prod_idx; + u32 cons = p_chain->u.chain16.cons_idx; u16 used; - used = (u16) (((u32)0x10000 + - (u32)p_chain->u.chain16.prod_idx) - - (u32)p_chain->u.chain16.cons_idx); + if (prod < cons) + prod += (u32)U16_MAX + 1; + + used = (u16)(prod - cons); if (p_chain->mode == QED_CHAIN_MODE_NEXT_PTR) - used -= p_chain->u.chain16.prod_idx / p_chain->elem_per_page - - p_chain->u.chain16.cons_idx / p_chain->elem_per_page; + used -= prod / elem_per_page - cons / elem_per_page; return (u16)(p_chain->capacity - used); } static inline u32 qed_chain_get_elem_left_u32(struct qed_chain *p_chain) { + u16 elem_per_page = p_chain->elem_per_page; + u64 prod = p_chain->u.chain32.prod_idx; + u64 cons = p_chain->u.chain32.cons_idx; u32 used; - used = (u32) (((u64)0x100000000ULL + - (u64)p_chain->u.chain32.prod_idx) - - (u64)p_chain->u.chain32.cons_idx); + if (prod < cons) + prod += (u64)U32_MAX + 1; + + used = (u32)(prod - cons); if (p_chain->mode == QED_CHAIN_MODE_NEXT_PTR) - used -= p_chain->u.chain32.prod_idx / p_chain->elem_per_page - - p_chain->u.chain32.cons_idx / p_chain->elem_per_page; + used -= (u32)(prod / elem_per_page - cons / elem_per_page); return p_chain->capacity - used; } From 31333c1a2521ff4b4ceb0c29de492549cd4a8de3 Mon Sep 17 00:00:00 2001 From: Alexander Lobakin Date: Tue, 23 Jun 2020 16:51:30 +0300 Subject: [PATCH 358/618] net: qed: fix async event callbacks unregistering qed_spq_unregister_async_cb() should be called before qed_rdma_info_free() to avoid crash-spawning uses-after-free. Instead of calling it from each subsystem exit code, do it in one place on PF down. Fixes: 291d57f67d24 ("qed: Fix rdma_info structure allocation") Signed-off-by: Alexander Lobakin Signed-off-by: Igor Russkikh Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 9 +++++++-- drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 2 -- drivers/net/ethernet/qlogic/qed/qed_roce.c | 1 - 3 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 1eebf30fa798..b41ada668948 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -1368,6 +1368,8 @@ static void qed_dbg_user_data_free(struct qed_hwfn *p_hwfn) void qed_resc_free(struct qed_dev *cdev) { + struct qed_rdma_info *rdma_info; + struct qed_hwfn *p_hwfn; int i; if (IS_VF(cdev)) { @@ -1385,7 +1387,8 @@ void qed_resc_free(struct qed_dev *cdev) qed_llh_free(cdev); for_each_hwfn(cdev, i) { - struct qed_hwfn *p_hwfn = &cdev->hwfns[i]; + p_hwfn = cdev->hwfns + i; + rdma_info = p_hwfn->p_rdma_info; qed_cxt_mngr_free(p_hwfn); qed_qm_info_free(p_hwfn); @@ -1404,8 +1407,10 @@ void qed_resc_free(struct qed_dev *cdev) qed_ooo_free(p_hwfn); } - if (QED_IS_RDMA_PERSONALITY(p_hwfn)) + if (QED_IS_RDMA_PERSONALITY(p_hwfn) && rdma_info) { + qed_spq_unregister_async_cb(p_hwfn, rdma_info->proto); qed_rdma_info_free(p_hwfn); + } qed_iov_free(p_hwfn); qed_l2_free(p_hwfn); diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c index d2fe61a5cf56..5409a2da6106 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c @@ -2836,8 +2836,6 @@ int qed_iwarp_stop(struct qed_hwfn *p_hwfn) if (rc) return rc; - qed_spq_unregister_async_cb(p_hwfn, PROTOCOLID_IWARP); - return qed_iwarp_ll2_stop(p_hwfn); } diff --git a/drivers/net/ethernet/qlogic/qed/qed_roce.c b/drivers/net/ethernet/qlogic/qed/qed_roce.c index 4566815f7b87..7271dd7166e5 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_roce.c +++ b/drivers/net/ethernet/qlogic/qed/qed_roce.c @@ -113,7 +113,6 @@ void qed_roce_stop(struct qed_hwfn *p_hwfn) break; } } - qed_spq_unregister_async_cb(p_hwfn, PROTOCOLID_ROCE); } static void qed_rdma_copy_gids(struct qed_rdma_qp *qp, __le32 *src_gid, From 4079c7f7a2a00ab403c177ce723b560de59139c3 Mon Sep 17 00:00:00 2001 From: Alexander Lobakin Date: Tue, 23 Jun 2020 16:51:31 +0300 Subject: [PATCH 359/618] net: qede: stop adding events on an already destroyed workqueue Set rdma_wq pointer to NULL after destroying the workqueue and check for it when adding new events to fix crashes on driver unload. Fixes: cee9fbd8e2e9 ("qede: Add qedr framework") Signed-off-by: Alexander Lobakin Signed-off-by: Igor Russkikh Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_rdma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qede/qede_rdma.c b/drivers/net/ethernet/qlogic/qede/qede_rdma.c index 2d873ae8a234..668ccc9d49f8 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_rdma.c +++ b/drivers/net/ethernet/qlogic/qede/qede_rdma.c @@ -105,6 +105,7 @@ static void qede_rdma_destroy_wq(struct qede_dev *edev) qede_rdma_cleanup_event(edev); destroy_workqueue(edev->rdma_info.rdma_wq); + edev->rdma_info.rdma_wq = NULL; } int qede_rdma_dev_add(struct qede_dev *edev, bool recovery) @@ -325,7 +326,7 @@ static void qede_rdma_add_event(struct qede_dev *edev, if (edev->rdma_info.exp_recovery) return; - if (!edev->rdma_info.qedr_dev) + if (!edev->rdma_info.qedr_dev || !edev->rdma_info.rdma_wq) return; /* We don't want the cleanup flow to start while we're allocating and From ccd7c7ce167a21dbf2b698ffcf00f11d96d44f9b Mon Sep 17 00:00:00 2001 From: Alexander Lobakin Date: Tue, 23 Jun 2020 16:51:32 +0300 Subject: [PATCH 360/618] net: qed: fix NVMe login fails over VFs 25ms sleep cycles in waiting for PF response are excessive and may lead to different timeout failures. Start to wait with short udelays, and in most cases polling will end here. If the time was not sufficient, switch to msleeps. usleep_range() may go far beyond 100us depending on platform and tick configuration, hence atomic udelays for consistency. Also add explicit DMA barriers since 'done' always comes from a shared request-response DMA pool, and note that in the comment nearby. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin Signed-off-by: Igor Russkikh Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_vf.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_vf.c b/drivers/net/ethernet/qlogic/qed/qed_vf.c index 856051f50eb7..adc2c8f3d48e 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_vf.c +++ b/drivers/net/ethernet/qlogic/qed/qed_vf.c @@ -81,12 +81,17 @@ static void qed_vf_pf_req_end(struct qed_hwfn *p_hwfn, int req_status) mutex_unlock(&(p_hwfn->vf_iov_info->mutex)); } +#define QED_VF_CHANNEL_USLEEP_ITERATIONS 90 +#define QED_VF_CHANNEL_USLEEP_DELAY 100 +#define QED_VF_CHANNEL_MSLEEP_ITERATIONS 10 +#define QED_VF_CHANNEL_MSLEEP_DELAY 25 + static int qed_send_msg2pf(struct qed_hwfn *p_hwfn, u8 *done, u32 resp_size) { union vfpf_tlvs *p_req = p_hwfn->vf_iov_info->vf2pf_request; struct ustorm_trigger_vf_zone trigger; struct ustorm_vf_zone *zone_data; - int rc = 0, time = 100; + int iter, rc = 0; zone_data = (struct ustorm_vf_zone *)PXP_VF_BAR0_START_USDM_ZONE_B; @@ -126,11 +131,19 @@ static int qed_send_msg2pf(struct qed_hwfn *p_hwfn, u8 *done, u32 resp_size) REG_WR(p_hwfn, (uintptr_t)&zone_data->trigger, *((u32 *)&trigger)); /* When PF would be done with the response, it would write back to the - * `done' address. Poll until then. + * `done' address from a coherent DMA zone. Poll until then. */ - while ((!*done) && time) { - msleep(25); - time--; + + iter = QED_VF_CHANNEL_USLEEP_ITERATIONS; + while (!*done && iter--) { + udelay(QED_VF_CHANNEL_USLEEP_DELAY); + dma_rmb(); + } + + iter = QED_VF_CHANNEL_MSLEEP_ITERATIONS; + while (!*done && iter--) { + msleep(QED_VF_CHANNEL_MSLEEP_DELAY); + dma_rmb(); } if (!*done) { From d434d02f7e7c24c721365fd594ed781acb18e0da Mon Sep 17 00:00:00 2001 From: Alexander Lobakin Date: Tue, 23 Jun 2020 16:51:33 +0300 Subject: [PATCH 361/618] net: qed: fix excessive QM ILT lines consumption This is likely a copy'n'paste mistake. The amount of ILT lines to reserve for a single VF was being multiplied by the total VFs count. This led to a huge redundancy in reservation and potential lines drainouts. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin Signed-off-by: Igor Russkikh Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_cxt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.c b/drivers/net/ethernet/qlogic/qed/qed_cxt.c index 7b76667acaba..c0a769b5358c 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c +++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c @@ -271,7 +271,7 @@ static void qed_cxt_qm_iids(struct qed_hwfn *p_hwfn, vf_tids += segs[NUM_TASK_PF_SEGMENTS].count; } - iids->vf_cids += vf_cids * p_mngr->vf_count; + iids->vf_cids = vf_cids; iids->tids += vf_tids * p_mngr->vf_count; DP_VERBOSE(p_hwfn, QED_MSG_ILT, From 1c85f394c2206ea3835f43534d5675f0574e1b70 Mon Sep 17 00:00:00 2001 From: Alexander Lobakin Date: Tue, 23 Jun 2020 16:51:34 +0300 Subject: [PATCH 362/618] net: qede: fix PTP initialization on recovery Currently PTP cyclecounter and timecounter are initialized only on the first probing and are cleaned up during removal. This means that PTP becomes non-functional after device recovery. Fix this by unconditional PTP initialization on probing and clearing Tx pending bit on exiting. Fixes: ccc67ef50b90 ("qede: Error recovery process") Signed-off-by: Alexander Lobakin Signed-off-by: Igor Russkikh Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_main.c | 2 +- drivers/net/ethernet/qlogic/qede/qede_ptp.c | 29 ++++++++------------ drivers/net/ethernet/qlogic/qede/qede_ptp.h | 2 +- 3 files changed, 14 insertions(+), 19 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 756c05eb96f3..f6ff31e73ebe 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -1229,7 +1229,7 @@ static int __qede_probe(struct pci_dev *pdev, u32 dp_module, u8 dp_level, /* PTP not supported on VFs */ if (!is_vf) - qede_ptp_enable(edev, (mode == QEDE_PROBE_NORMAL)); + qede_ptp_enable(edev); edev->ops->register_ops(cdev, &qede_ll_ops, edev); diff --git a/drivers/net/ethernet/qlogic/qede/qede_ptp.c b/drivers/net/ethernet/qlogic/qede/qede_ptp.c index 4c7f7a7fc151..cd5841a9415e 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_ptp.c +++ b/drivers/net/ethernet/qlogic/qede/qede_ptp.c @@ -412,6 +412,7 @@ void qede_ptp_disable(struct qede_dev *edev) if (ptp->tx_skb) { dev_kfree_skb_any(ptp->tx_skb); ptp->tx_skb = NULL; + clear_bit_unlock(QEDE_FLAGS_PTP_TX_IN_PRORGESS, &edev->flags); } /* Disable PTP in HW */ @@ -423,7 +424,7 @@ void qede_ptp_disable(struct qede_dev *edev) edev->ptp = NULL; } -static int qede_ptp_init(struct qede_dev *edev, bool init_tc) +static int qede_ptp_init(struct qede_dev *edev) { struct qede_ptp *ptp; int rc; @@ -444,25 +445,19 @@ static int qede_ptp_init(struct qede_dev *edev, bool init_tc) /* Init work queue for Tx timestamping */ INIT_WORK(&ptp->work, qede_ptp_task); - /* Init cyclecounter and timecounter. This is done only in the first - * load. If done in every load, PTP application will fail when doing - * unload / load (e.g. MTU change) while it is running. - */ - if (init_tc) { - memset(&ptp->cc, 0, sizeof(ptp->cc)); - ptp->cc.read = qede_ptp_read_cc; - ptp->cc.mask = CYCLECOUNTER_MASK(64); - ptp->cc.shift = 0; - ptp->cc.mult = 1; + /* Init cyclecounter and timecounter */ + memset(&ptp->cc, 0, sizeof(ptp->cc)); + ptp->cc.read = qede_ptp_read_cc; + ptp->cc.mask = CYCLECOUNTER_MASK(64); + ptp->cc.shift = 0; + ptp->cc.mult = 1; - timecounter_init(&ptp->tc, &ptp->cc, - ktime_to_ns(ktime_get_real())); - } + timecounter_init(&ptp->tc, &ptp->cc, ktime_to_ns(ktime_get_real())); - return rc; + return 0; } -int qede_ptp_enable(struct qede_dev *edev, bool init_tc) +int qede_ptp_enable(struct qede_dev *edev) { struct qede_ptp *ptp; int rc; @@ -483,7 +478,7 @@ int qede_ptp_enable(struct qede_dev *edev, bool init_tc) edev->ptp = ptp; - rc = qede_ptp_init(edev, init_tc); + rc = qede_ptp_init(edev); if (rc) goto err1; diff --git a/drivers/net/ethernet/qlogic/qede/qede_ptp.h b/drivers/net/ethernet/qlogic/qede/qede_ptp.h index 691a14c4b2c5..89c7f3cf3ee2 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_ptp.h +++ b/drivers/net/ethernet/qlogic/qede/qede_ptp.h @@ -41,7 +41,7 @@ void qede_ptp_rx_ts(struct qede_dev *edev, struct sk_buff *skb); void qede_ptp_tx_ts(struct qede_dev *edev, struct sk_buff *skb); int qede_ptp_hw_ts(struct qede_dev *edev, struct ifreq *req); void qede_ptp_disable(struct qede_dev *edev); -int qede_ptp_enable(struct qede_dev *edev, bool init_tc); +int qede_ptp_enable(struct qede_dev *edev); int qede_ptp_get_ts_info(struct qede_dev *edev, struct ethtool_ts_info *ts); static inline void qede_ptp_record_rx_ts(struct qede_dev *edev, From ec6c80590bde6b5dfa4970fffa3572f1acd313ca Mon Sep 17 00:00:00 2001 From: Alexander Lobakin Date: Tue, 23 Jun 2020 16:51:35 +0300 Subject: [PATCH 363/618] net: qede: fix use-after-free on recovery and AER handling Set edev->cdev pointer to NULL after calling remove() callback to avoid using of already freed object. Fixes: ccc67ef50b90 ("qede: Error recovery process") Signed-off-by: Alexander Lobakin Signed-off-by: Igor Russkikh Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index f6ff31e73ebe..29e285430f99 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -1318,6 +1318,7 @@ static void __qede_remove(struct pci_dev *pdev, enum qede_remove_mode mode) if (system_state == SYSTEM_POWER_OFF) return; qed_ops->common->remove(cdev); + edev->cdev = NULL; /* Since this can happen out-of-sync with other flows, * don't release the netdevice until after slowpath stop From c221dd1831732449f844e03631a34fd21c2b9429 Mon Sep 17 00:00:00 2001 From: Alexander Lobakin Date: Tue, 23 Jun 2020 16:51:36 +0300 Subject: [PATCH 364/618] net: qed: reset ILT block sizes before recomputing to fix crashes Sizes of all ILT blocks must be reset before ILT recomputing when disabling clients, or memory allocation may exceed ILT shadow array and provoke system crashes. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin Signed-off-by: Igor Russkikh Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_cxt.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.c b/drivers/net/ethernet/qlogic/qed/qed_cxt.c index c0a769b5358c..08ba9d54ab63 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c +++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c @@ -465,6 +465,20 @@ static struct qed_ilt_cli_blk *qed_cxt_set_blk(struct qed_ilt_cli_blk *p_blk) return p_blk; } +static void qed_cxt_ilt_blk_reset(struct qed_hwfn *p_hwfn) +{ + struct qed_ilt_client_cfg *clients = p_hwfn->p_cxt_mngr->clients; + u32 cli_idx, blk_idx; + + for (cli_idx = 0; cli_idx < MAX_ILT_CLIENTS; cli_idx++) { + for (blk_idx = 0; blk_idx < ILT_CLI_PF_BLOCKS; blk_idx++) + clients[cli_idx].pf_blks[blk_idx].total_size = 0; + + for (blk_idx = 0; blk_idx < ILT_CLI_VF_BLOCKS; blk_idx++) + clients[cli_idx].vf_blks[blk_idx].total_size = 0; + } +} + int qed_cxt_cfg_ilt_compute(struct qed_hwfn *p_hwfn, u32 *line_count) { struct qed_cxt_mngr *p_mngr = p_hwfn->p_cxt_mngr; @@ -484,6 +498,11 @@ int qed_cxt_cfg_ilt_compute(struct qed_hwfn *p_hwfn, u32 *line_count) p_mngr->pf_start_line = RESC_START(p_hwfn, QED_ILT); + /* Reset all ILT blocks at the beginning of ILT computing in order + * to prevent memory allocation for irrelevant blocks afterwards. + */ + qed_cxt_ilt_blk_reset(p_hwfn); + DP_VERBOSE(p_hwfn, QED_MSG_ILT, "hwfn [%d] - Set context manager starting line to be 0x%08x\n", p_hwfn->my_id, p_hwfn->p_cxt_mngr->pf_start_line); From 10f468ea5c481b3a60cc291c4dfdc7bb338abb74 Mon Sep 17 00:00:00 2001 From: Alexander Lobakin Date: Tue, 23 Jun 2020 16:51:37 +0300 Subject: [PATCH 365/618] net: qed: fix "maybe uninitialized" warning Variable 'abs_ppfid' in qed_dev.c:qed_llh_add_mac_filter() always gets printed, but is initialized only under 'ref_cnt == 1' condition. This results in: In file included from ./include/linux/kernel.h:15:0, from ./include/asm-generic/bug.h:19, from ./arch/x86/include/asm/bug.h:86, from ./include/linux/bug.h:5, from ./include/linux/io.h:11, from drivers/net/ethernet/qlogic/qed/qed_dev.c:35: drivers/net/ethernet/qlogic/qed/qed_dev.c: In function 'qed_llh_add_mac_filter': ./include/linux/printk.h:358:2: warning: 'abs_ppfid' may be used uninitialized in this function [-Wmaybe-uninitialized] printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~ drivers/net/ethernet/qlogic/qed/qed_dev.c:983:17: note: 'abs_ppfid' was declared here u8 filter_idx, abs_ppfid; ^~~~~~~~~ ...under W=1+. Fix this by initializing it with zero. Fixes: 79284adeb99e ("qed: Add llh ppfid interface and 100g support for offload protocols") Signed-off-by: Alexander Lobakin Signed-off-by: Igor Russkikh Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index b41ada668948..3aa51374e727 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -980,7 +980,7 @@ int qed_llh_add_mac_filter(struct qed_dev *cdev, struct qed_hwfn *p_hwfn = QED_LEADING_HWFN(cdev); struct qed_ptt *p_ptt = qed_ptt_acquire(p_hwfn); union qed_llh_filter filter = {}; - u8 filter_idx, abs_ppfid; + u8 filter_idx, abs_ppfid = 0; u32 high, low, ref_cnt; int rc = 0; From ee434a4f9f5ea15b0f84bddd8c012838cf9472c5 Mon Sep 17 00:00:00 2001 From: John van der Kamp Date: Tue, 23 Jun 2020 23:30:54 +0200 Subject: [PATCH 366/618] drm/amdgpu/display: Unlock mutex on error Make sure we pass through ret label to unlock the mutex. Signed-off-by: John van der Kamp Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c index dcf84a61de37..949d10ef8304 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c @@ -510,8 +510,10 @@ static ssize_t srm_data_read(struct file *filp, struct kobject *kobj, struct bin srm = psp_get_srm(work->hdcp.config.psp.handle, &srm_version, &srm_size); - if (!srm) - return -EINVAL; + if (!srm) { + ret = -EINVAL; + goto ret; + } if (pos >= srm_size) ret = 0; From 11d8cd5c9f3b46f397f889cefdb66795518aaebd Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Wed, 24 Jun 2020 01:51:31 +0530 Subject: [PATCH 367/618] cxgb4: move handling L2T ARP failures to caller Move code handling L2T ARP failures to the only caller. Fixes following sparse warning: skbuff.h:2091:29: warning: context imbalance in 'handle_failed_resolution' - unexpected unlock Fixes: 749cb5fe48bb ("cxgb4: Replace arpq_head/arpq_tail with SKB double link-list code") Signed-off-by: Rahul Lakkireddy Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/l2t.c | 52 +++++++++++------------- 1 file changed, 24 insertions(+), 28 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/l2t.c b/drivers/net/ethernet/chelsio/cxgb4/l2t.c index 72b37a66c7d8..0ed20a9cca14 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/l2t.c +++ b/drivers/net/ethernet/chelsio/cxgb4/l2t.c @@ -502,41 +502,20 @@ u64 cxgb4_select_ntuple(struct net_device *dev, } EXPORT_SYMBOL(cxgb4_select_ntuple); -/* - * Called when address resolution fails for an L2T entry to handle packets - * on the arpq head. If a packet specifies a failure handler it is invoked, - * otherwise the packet is sent to the device. - */ -static void handle_failed_resolution(struct adapter *adap, struct l2t_entry *e) -{ - struct sk_buff *skb; - - while ((skb = __skb_dequeue(&e->arpq)) != NULL) { - const struct l2t_skb_cb *cb = L2T_SKB_CB(skb); - - spin_unlock(&e->lock); - if (cb->arp_err_handler) - cb->arp_err_handler(cb->handle, skb); - else - t4_ofld_send(adap, skb); - spin_lock(&e->lock); - } -} - /* * Called when the host's neighbor layer makes a change to some entry that is * loaded into the HW L2 table. */ void t4_l2t_update(struct adapter *adap, struct neighbour *neigh) { - struct l2t_entry *e; - struct sk_buff_head *arpq = NULL; - struct l2t_data *d = adap->l2t; unsigned int addr_len = neigh->tbl->key_len; u32 *addr = (u32 *) neigh->primary_key; - int ifidx = neigh->dev->ifindex; - int hash = addr_hash(d, addr, addr_len, ifidx); + int hash, ifidx = neigh->dev->ifindex; + struct sk_buff_head *arpq = NULL; + struct l2t_data *d = adap->l2t; + struct l2t_entry *e; + hash = addr_hash(d, addr, addr_len, ifidx); read_lock_bh(&d->lock); for (e = d->l2tab[hash].first; e; e = e->next) if (!addreq(e, addr) && e->ifindex == ifidx) { @@ -569,8 +548,25 @@ void t4_l2t_update(struct adapter *adap, struct neighbour *neigh) write_l2e(adap, e, 0); } - if (arpq) - handle_failed_resolution(adap, e); + if (arpq) { + struct sk_buff *skb; + + /* Called when address resolution fails for an L2T + * entry to handle packets on the arpq head. If a + * packet specifies a failure handler it is invoked, + * otherwise the packet is sent to the device. + */ + while ((skb = __skb_dequeue(&e->arpq)) != NULL) { + const struct l2t_skb_cb *cb = L2T_SKB_CB(skb); + + spin_unlock(&e->lock); + if (cb->arp_err_handler) + cb->arp_err_handler(cb->handle, skb); + else + t4_ofld_send(adap, skb); + spin_lock(&e->lock); + } + } spin_unlock_bh(&e->lock); } From 030c98824deaba205787af501a074b3d7f46e32e Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Wed, 24 Jun 2020 01:51:32 +0530 Subject: [PATCH 368/618] cxgb4: move PTP lock and unlock to caller in Tx path Check for whether PTP is enabled or not at the caller and perform locking/unlocking at the caller. Fixes following sparse warning: sge.c:1641:26: warning: context imbalance in 'cxgb4_eth_xmit' - different lock contexts for basic block Fixes: a456950445a0 ("cxgb4: time stamping interface for PTP") Signed-off-by: Rahul Lakkireddy Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/sge.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index 1359158652b7..f7b5a2f11001 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -1425,12 +1425,10 @@ static netdev_tx_t cxgb4_eth_xmit(struct sk_buff *skb, struct net_device *dev) qidx = skb_get_queue_mapping(skb); if (ptp_enabled) { - spin_lock(&adap->ptp_lock); if (!(adap->ptp_tx_skb)) { skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; adap->ptp_tx_skb = skb_get(skb); } else { - spin_unlock(&adap->ptp_lock); goto out_free; } q = &adap->sge.ptptxq; @@ -1444,11 +1442,8 @@ static netdev_tx_t cxgb4_eth_xmit(struct sk_buff *skb, struct net_device *dev) #ifdef CONFIG_CHELSIO_T4_FCOE ret = cxgb_fcoe_offload(skb, adap, pi, &cntrl); - if (unlikely(ret == -ENOTSUPP)) { - if (ptp_enabled) - spin_unlock(&adap->ptp_lock); + if (unlikely(ret == -EOPNOTSUPP)) goto out_free; - } #endif /* CONFIG_CHELSIO_T4_FCOE */ chip_ver = CHELSIO_CHIP_VERSION(adap->params.chip); @@ -1461,8 +1456,6 @@ static netdev_tx_t cxgb4_eth_xmit(struct sk_buff *skb, struct net_device *dev) dev_err(adap->pdev_dev, "%s: Tx ring %u full while queue awake!\n", dev->name, qidx); - if (ptp_enabled) - spin_unlock(&adap->ptp_lock); return NETDEV_TX_BUSY; } @@ -1481,8 +1474,6 @@ static netdev_tx_t cxgb4_eth_xmit(struct sk_buff *skb, struct net_device *dev) unlikely(cxgb4_map_skb(adap->pdev_dev, skb, sgl_sdesc->addr) < 0)) { memset(sgl_sdesc->addr, 0, sizeof(sgl_sdesc->addr)); q->mapping_err++; - if (ptp_enabled) - spin_unlock(&adap->ptp_lock); goto out_free; } @@ -1630,8 +1621,6 @@ static netdev_tx_t cxgb4_eth_xmit(struct sk_buff *skb, struct net_device *dev) txq_advance(&q->q, ndesc); cxgb4_ring_tx_db(adap, &q->q, ndesc); - if (ptp_enabled) - spin_unlock(&adap->ptp_lock); return NETDEV_TX_OK; out_free: @@ -2377,6 +2366,16 @@ netdev_tx_t t4_start_xmit(struct sk_buff *skb, struct net_device *dev) if (unlikely(qid >= pi->nqsets)) return cxgb4_ethofld_xmit(skb, dev); + if (is_ptp_enabled(skb, dev)) { + struct adapter *adap = netdev2adap(dev); + netdev_tx_t ret; + + spin_lock(&adap->ptp_lock); + ret = cxgb4_eth_xmit(skb, dev); + spin_unlock(&adap->ptp_lock); + return ret; + } + return cxgb4_eth_xmit(skb, dev); } From 589b1c9c166dce120e27b32a83a78f55464a7ef9 Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Wed, 24 Jun 2020 01:51:33 +0530 Subject: [PATCH 369/618] cxgb4: use unaligned conversion for fetching timestamp Use get_unaligned_be64() to fetch the timestamp needed for ns_to_ktime() conversion. Fixes following sparse warning: sge.c:3282:43: warning: cast to restricted __be64 Fixes: a456950445a0 ("cxgb4: time stamping interface for PTP") Signed-off-by: Rahul Lakkireddy Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/sge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index f7b5a2f11001..3c8b4b153ec4 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -3312,7 +3312,7 @@ static noinline int t4_systim_to_hwstamp(struct adapter *adapter, hwtstamps = skb_hwtstamps(skb); memset(hwtstamps, 0, sizeof(*hwtstamps)); - hwtstamps->hwtstamp = ns_to_ktime(be64_to_cpu(*((u64 *)data))); + hwtstamps->hwtstamp = ns_to_ktime(get_unaligned_be64(data)); return RX_PTP_PKT_SUC; } From 27f78cb245abdb86735529c13b0a579f57829e71 Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Wed, 24 Jun 2020 01:51:34 +0530 Subject: [PATCH 370/618] cxgb4: parse TC-U32 key values and masks natively TC-U32 passes all keys values and masks in __be32 format. The parser already expects this and hence pass the value and masks in __be32 natively to the parser. Fixes following sparse warnings in several places: cxgb4_tc_u32.c:57:21: warning: incorrect type in assignment (different base types) cxgb4_tc_u32.c:57:21: expected unsigned int [usertype] val cxgb4_tc_u32.c:57:21: got restricted __be32 [usertype] val cxgb4_tc_u32_parse.h:48:24: warning: cast to restricted __be32 Fixes: 2e8aad7bf203 ("cxgb4: add parser to translate u32 filters to internal spec") Signed-off-by: Rahul Lakkireddy Signed-off-by: David S. Miller --- .../net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c | 18 +-- .../chelsio/cxgb4/cxgb4_tc_u32_parse.h | 122 ++++++++++++------ 2 files changed, 91 insertions(+), 49 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c index 3f3c11e54d97..dede02505ceb 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c @@ -48,7 +48,7 @@ static int fill_match_fields(struct adapter *adap, bool next_header) { unsigned int i, j; - u32 val, mask; + __be32 val, mask; int off, err; bool found; @@ -228,7 +228,7 @@ int cxgb4_config_knode(struct net_device *dev, struct tc_cls_u32_offload *cls) const struct cxgb4_next_header *next; bool found = false; unsigned int i, j; - u32 val, mask; + __be32 val, mask; int off; if (t->table[link_uhtid - 1].link_handle) { @@ -242,10 +242,10 @@ int cxgb4_config_knode(struct net_device *dev, struct tc_cls_u32_offload *cls) /* Try to find matches that allow jumps to next header. */ for (i = 0; next[i].jump; i++) { - if (next[i].offoff != cls->knode.sel->offoff || - next[i].shift != cls->knode.sel->offshift || - next[i].mask != cls->knode.sel->offmask || - next[i].offset != cls->knode.sel->off) + if (next[i].sel.offoff != cls->knode.sel->offoff || + next[i].sel.offshift != cls->knode.sel->offshift || + next[i].sel.offmask != cls->knode.sel->offmask || + next[i].sel.off != cls->knode.sel->off) continue; /* Found a possible candidate. Find a key that @@ -257,9 +257,9 @@ int cxgb4_config_knode(struct net_device *dev, struct tc_cls_u32_offload *cls) val = cls->knode.sel->keys[j].val; mask = cls->knode.sel->keys[j].mask; - if (next[i].match_off == off && - next[i].match_val == val && - next[i].match_mask == mask) { + if (next[i].key.off == off && + next[i].key.val == val && + next[i].key.mask == mask) { found = true; break; } diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h index 125868c6770a..f59dd4b2ae6f 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h @@ -38,12 +38,12 @@ struct cxgb4_match_field { int off; /* Offset from the beginning of the header to match */ /* Fill the value/mask pair in the spec if matched */ - int (*val)(struct ch_filter_specification *f, u32 val, u32 mask); + int (*val)(struct ch_filter_specification *f, __be32 val, __be32 mask); }; /* IPv4 match fields */ static inline int cxgb4_fill_ipv4_tos(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { f->val.tos = (ntohl(val) >> 16) & 0x000000FF; f->mask.tos = (ntohl(mask) >> 16) & 0x000000FF; @@ -52,7 +52,7 @@ static inline int cxgb4_fill_ipv4_tos(struct ch_filter_specification *f, } static inline int cxgb4_fill_ipv4_frag(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { u32 mask_val; u8 frag_val; @@ -74,7 +74,7 @@ static inline int cxgb4_fill_ipv4_frag(struct ch_filter_specification *f, } static inline int cxgb4_fill_ipv4_proto(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { f->val.proto = (ntohl(val) >> 16) & 0x000000FF; f->mask.proto = (ntohl(mask) >> 16) & 0x000000FF; @@ -83,7 +83,7 @@ static inline int cxgb4_fill_ipv4_proto(struct ch_filter_specification *f, } static inline int cxgb4_fill_ipv4_src_ip(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.fip[0], &val, sizeof(u32)); memcpy(&f->mask.fip[0], &mask, sizeof(u32)); @@ -92,7 +92,7 @@ static inline int cxgb4_fill_ipv4_src_ip(struct ch_filter_specification *f, } static inline int cxgb4_fill_ipv4_dst_ip(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.lip[0], &val, sizeof(u32)); memcpy(&f->mask.lip[0], &mask, sizeof(u32)); @@ -111,7 +111,7 @@ static const struct cxgb4_match_field cxgb4_ipv4_fields[] = { /* IPv6 match fields */ static inline int cxgb4_fill_ipv6_tos(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { f->val.tos = (ntohl(val) >> 20) & 0x000000FF; f->mask.tos = (ntohl(mask) >> 20) & 0x000000FF; @@ -120,7 +120,7 @@ static inline int cxgb4_fill_ipv6_tos(struct ch_filter_specification *f, } static inline int cxgb4_fill_ipv6_proto(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { f->val.proto = (ntohl(val) >> 8) & 0x000000FF; f->mask.proto = (ntohl(mask) >> 8) & 0x000000FF; @@ -129,7 +129,7 @@ static inline int cxgb4_fill_ipv6_proto(struct ch_filter_specification *f, } static inline int cxgb4_fill_ipv6_src_ip0(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.fip[0], &val, sizeof(u32)); memcpy(&f->mask.fip[0], &mask, sizeof(u32)); @@ -138,7 +138,7 @@ static inline int cxgb4_fill_ipv6_src_ip0(struct ch_filter_specification *f, } static inline int cxgb4_fill_ipv6_src_ip1(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.fip[4], &val, sizeof(u32)); memcpy(&f->mask.fip[4], &mask, sizeof(u32)); @@ -147,7 +147,7 @@ static inline int cxgb4_fill_ipv6_src_ip1(struct ch_filter_specification *f, } static inline int cxgb4_fill_ipv6_src_ip2(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.fip[8], &val, sizeof(u32)); memcpy(&f->mask.fip[8], &mask, sizeof(u32)); @@ -156,7 +156,7 @@ static inline int cxgb4_fill_ipv6_src_ip2(struct ch_filter_specification *f, } static inline int cxgb4_fill_ipv6_src_ip3(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.fip[12], &val, sizeof(u32)); memcpy(&f->mask.fip[12], &mask, sizeof(u32)); @@ -165,7 +165,7 @@ static inline int cxgb4_fill_ipv6_src_ip3(struct ch_filter_specification *f, } static inline int cxgb4_fill_ipv6_dst_ip0(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.lip[0], &val, sizeof(u32)); memcpy(&f->mask.lip[0], &mask, sizeof(u32)); @@ -174,7 +174,7 @@ static inline int cxgb4_fill_ipv6_dst_ip0(struct ch_filter_specification *f, } static inline int cxgb4_fill_ipv6_dst_ip1(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.lip[4], &val, sizeof(u32)); memcpy(&f->mask.lip[4], &mask, sizeof(u32)); @@ -183,7 +183,7 @@ static inline int cxgb4_fill_ipv6_dst_ip1(struct ch_filter_specification *f, } static inline int cxgb4_fill_ipv6_dst_ip2(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.lip[8], &val, sizeof(u32)); memcpy(&f->mask.lip[8], &mask, sizeof(u32)); @@ -192,7 +192,7 @@ static inline int cxgb4_fill_ipv6_dst_ip2(struct ch_filter_specification *f, } static inline int cxgb4_fill_ipv6_dst_ip3(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.lip[12], &val, sizeof(u32)); memcpy(&f->mask.lip[12], &mask, sizeof(u32)); @@ -216,7 +216,7 @@ static const struct cxgb4_match_field cxgb4_ipv6_fields[] = { /* TCP/UDP match */ static inline int cxgb4_fill_l4_ports(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { f->val.fport = ntohl(val) >> 16; f->mask.fport = ntohl(mask) >> 16; @@ -237,19 +237,13 @@ static const struct cxgb4_match_field cxgb4_udp_fields[] = { }; struct cxgb4_next_header { - unsigned int offset; /* Offset to next header */ - /* offset, shift, and mask added to offset above + /* Offset, shift, and mask added to beginning of the header * to get to next header. Useful when using a header * field's value to jump to next header such as IHL field * in IPv4 header. */ - unsigned int offoff; - u32 shift; - u32 mask; - /* match criteria to make this jump */ - unsigned int match_off; - u32 match_val; - u32 match_mask; + struct tc_u32_sel sel; + struct tc_u32_key key; /* location of jump to make */ const struct cxgb4_match_field *jump; }; @@ -258,26 +252,74 @@ struct cxgb4_next_header { * IPv4 header. */ static const struct cxgb4_next_header cxgb4_ipv4_jumps[] = { - { .offset = 0, .offoff = 0, .shift = 6, .mask = 0xF, - .match_off = 8, .match_val = 0x600, .match_mask = 0xFF00, - .jump = cxgb4_tcp_fields }, - { .offset = 0, .offoff = 0, .shift = 6, .mask = 0xF, - .match_off = 8, .match_val = 0x1100, .match_mask = 0xFF00, - .jump = cxgb4_udp_fields }, - { .jump = NULL } + { + /* TCP Jump */ + .sel = { + .off = 0, + .offoff = 0, + .offshift = 6, + .offmask = cpu_to_be16(0x0f00), + }, + .key = { + .off = 8, + .val = cpu_to_be32(0x00060000), + .mask = cpu_to_be32(0x00ff0000), + }, + .jump = cxgb4_tcp_fields, + }, + { + /* UDP Jump */ + .sel = { + .off = 0, + .offoff = 0, + .offshift = 6, + .offmask = cpu_to_be16(0x0f00), + }, + .key = { + .off = 8, + .val = cpu_to_be32(0x00110000), + .mask = cpu_to_be32(0x00ff0000), + }, + .jump = cxgb4_udp_fields, + }, + { .jump = NULL }, }; /* Accept a rule with a jump directly past the 40 Bytes of IPv6 fixed header * to get to transport layer header. */ static const struct cxgb4_next_header cxgb4_ipv6_jumps[] = { - { .offset = 0x28, .offoff = 0, .shift = 0, .mask = 0, - .match_off = 4, .match_val = 0x60000, .match_mask = 0xFF0000, - .jump = cxgb4_tcp_fields }, - { .offset = 0x28, .offoff = 0, .shift = 0, .mask = 0, - .match_off = 4, .match_val = 0x110000, .match_mask = 0xFF0000, - .jump = cxgb4_udp_fields }, - { .jump = NULL } + { + /* TCP Jump */ + .sel = { + .off = 40, + .offoff = 0, + .offshift = 0, + .offmask = 0, + }, + .key = { + .off = 4, + .val = cpu_to_be32(0x00000600), + .mask = cpu_to_be32(0x0000ff00), + }, + .jump = cxgb4_tcp_fields, + }, + { + /* UDP Jump */ + .sel = { + .off = 40, + .offoff = 0, + .offshift = 0, + .offmask = 0, + }, + .key = { + .off = 4, + .val = cpu_to_be32(0x00001100), + .mask = cpu_to_be32(0x0000ff00), + }, + .jump = cxgb4_udp_fields, + }, + { .jump = NULL }, }; struct cxgb4_link { From 63b53b0b99cd5f2d9754a21eda2ed8e706646cc9 Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Wed, 24 Jun 2020 01:51:35 +0530 Subject: [PATCH 371/618] cxgb4: fix endian conversions for L4 ports in filters The source and destination L4 ports in filter offload need to be in CPU endian. They will finally be converted to Big Endian after all operations are done and before giving them to hardware. The L4 ports for NAT are expected to be passed as a byte stream TCB. So, treat them as such. Fixes following sparse warnings in several places: cxgb4_tc_flower.c:159:33: warning: cast from restricted __be16 cxgb4_tc_flower.c:159:33: warning: incorrect type in argument 1 (different base types) cxgb4_tc_flower.c:159:33: expected unsigned short [usertype] val cxgb4_tc_flower.c:159:33: got restricted __be16 [usertype] dst Fixes: dca4faeb812f ("cxgb4: Add LE hash collision bug fix path in LLD driver") Fixes: 62488e4b53ae ("cxgb4: add basic tc flower offload support") Fixes: 557ccbf9dfa8 ("cxgb4: add tc flower support for L3/L4 rewrite") Signed-off-by: Rahul Lakkireddy Signed-off-by: David S. Miller --- .../net/ethernet/chelsio/cxgb4/cxgb4_filter.c | 15 +++++++--- .../net/ethernet/chelsio/cxgb4/cxgb4_main.c | 2 +- .../ethernet/chelsio/cxgb4/cxgb4_tc_flower.c | 30 +++++++------------ 3 files changed, 22 insertions(+), 25 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c index 796555255207..c6bf2648fe42 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c @@ -165,6 +165,9 @@ static void set_nat_params(struct adapter *adap, struct filter_entry *f, unsigned int tid, bool dip, bool sip, bool dp, bool sp) { + u8 *nat_lp = (u8 *)&f->fs.nat_lport; + u8 *nat_fp = (u8 *)&f->fs.nat_fport; + if (dip) { if (f->fs.type) { set_tcb_field(adap, f, tid, TCB_SND_UNA_RAW_W, @@ -236,8 +239,9 @@ static void set_nat_params(struct adapter *adap, struct filter_entry *f, } set_tcb_field(adap, f, tid, TCB_PDU_HDR_LEN_W, WORD_MASK, - (dp ? f->fs.nat_lport : 0) | - (sp ? f->fs.nat_fport << 16 : 0), 1); + (dp ? (nat_lp[1] | nat_lp[0] << 8) : 0) | + (sp ? (nat_fp[1] << 16 | nat_fp[0] << 24) : 0), + 1); } /* Validate filter spec against configuration done on the card. */ @@ -909,6 +913,9 @@ int set_filter_wr(struct adapter *adapter, int fidx) fwr->fpm = htons(f->fs.mask.fport); if (adapter->params.filter2_wr_support) { + u8 *nat_lp = (u8 *)&f->fs.nat_lport; + u8 *nat_fp = (u8 *)&f->fs.nat_fport; + fwr->natmode_to_ulp_type = FW_FILTER2_WR_ULP_TYPE_V(f->fs.nat_mode ? ULP_MODE_TCPDDP : @@ -916,8 +923,8 @@ int set_filter_wr(struct adapter *adapter, int fidx) FW_FILTER2_WR_NATMODE_V(f->fs.nat_mode); memcpy(fwr->newlip, f->fs.nat_lip, sizeof(fwr->newlip)); memcpy(fwr->newfip, f->fs.nat_fip, sizeof(fwr->newfip)); - fwr->newlport = htons(f->fs.nat_lport); - fwr->newfport = htons(f->fs.nat_fport); + fwr->newlport = htons(nat_lp[1] | nat_lp[0] << 8); + fwr->newfport = htons(nat_fp[1] | nat_fp[0] << 8); } /* Mark the filter as "pending" and ship off the Filter Work Request. diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 854b1717a70d..1e66159de079 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -2609,7 +2609,7 @@ int cxgb4_create_server_filter(const struct net_device *dev, unsigned int stid, /* Clear out filter specifications */ memset(&f->fs, 0, sizeof(struct ch_filter_specification)); - f->fs.val.lport = cpu_to_be16(sport); + f->fs.val.lport = be16_to_cpu(sport); f->fs.mask.lport = ~0; val = (u8 *)&sip; if ((val[0] | val[1] | val[2] | val[3]) != 0) { diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c index 4a5fa9eba0b6..59b65d4db086 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c @@ -58,10 +58,6 @@ static struct ch_tc_pedit_fields pedits[] = { PEDIT_FIELDS(IP6_, DST_63_32, 4, nat_lip, 4), PEDIT_FIELDS(IP6_, DST_95_64, 4, nat_lip, 8), PEDIT_FIELDS(IP6_, DST_127_96, 4, nat_lip, 12), - PEDIT_FIELDS(TCP_, SPORT, 2, nat_fport, 0), - PEDIT_FIELDS(TCP_, DPORT, 2, nat_lport, 0), - PEDIT_FIELDS(UDP_, SPORT, 2, nat_fport, 0), - PEDIT_FIELDS(UDP_, DPORT, 2, nat_lport, 0), }; static struct ch_tc_flower_entry *allocate_flower_entry(void) @@ -156,14 +152,14 @@ static void cxgb4_process_flow_match(struct net_device *dev, struct flow_match_ports match; flow_rule_match_ports(rule, &match); - fs->val.lport = cpu_to_be16(match.key->dst); - fs->mask.lport = cpu_to_be16(match.mask->dst); - fs->val.fport = cpu_to_be16(match.key->src); - fs->mask.fport = cpu_to_be16(match.mask->src); + fs->val.lport = be16_to_cpu(match.key->dst); + fs->mask.lport = be16_to_cpu(match.mask->dst); + fs->val.fport = be16_to_cpu(match.key->src); + fs->mask.fport = be16_to_cpu(match.mask->src); /* also initialize nat_lport/fport to same values */ - fs->nat_lport = cpu_to_be16(match.key->dst); - fs->nat_fport = cpu_to_be16(match.key->src); + fs->nat_lport = fs->val.lport; + fs->nat_fport = fs->val.fport; } if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_IP)) { @@ -354,12 +350,9 @@ static void process_pedit_field(struct ch_filter_specification *fs, u32 val, switch (offset) { case PEDIT_TCP_SPORT_DPORT: if (~mask & PEDIT_TCP_UDP_SPORT_MASK) - offload_pedit(fs, cpu_to_be32(val) >> 16, - cpu_to_be32(mask) >> 16, - TCP_SPORT); + fs->nat_fport = val; else - offload_pedit(fs, cpu_to_be32(val), - cpu_to_be32(mask), TCP_DPORT); + fs->nat_lport = val >> 16; } fs->nat_mode = NAT_MODE_ALL; break; @@ -367,12 +360,9 @@ static void process_pedit_field(struct ch_filter_specification *fs, u32 val, switch (offset) { case PEDIT_UDP_SPORT_DPORT: if (~mask & PEDIT_TCP_UDP_SPORT_MASK) - offload_pedit(fs, cpu_to_be32(val) >> 16, - cpu_to_be32(mask) >> 16, - UDP_SPORT); + fs->nat_fport = val; else - offload_pedit(fs, cpu_to_be32(val), - cpu_to_be32(mask), UDP_DPORT); + fs->nat_lport = val >> 16; } fs->nat_mode = NAT_MODE_ALL; } From f286dd8eaad5a2758750f407ab079298e0bcc8a5 Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Wed, 24 Jun 2020 01:51:36 +0530 Subject: [PATCH 372/618] cxgb4: use correct type for all-mask IP address comparison Use correct type to check for all-mask exact match IP addresses. Fixes following sparse warnings due to big endian value checks against 0xffffffff in is_addr_all_mask(): cxgb4_filter.c:977:25: warning: restricted __be32 degrades to integer cxgb4_filter.c:983:37: warning: restricted __be32 degrades to integer cxgb4_filter.c:984:37: warning: restricted __be32 degrades to integer cxgb4_filter.c:985:37: warning: restricted __be32 degrades to integer cxgb4_filter.c:986:37: warning: restricted __be32 degrades to integer Fixes: 3eb8b62d5a26 ("cxgb4: add support to create hash-filters via tc-flower offload") Signed-off-by: Rahul Lakkireddy Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c index c6bf2648fe42..7a7f61a8cdf4 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c @@ -1112,16 +1112,16 @@ static bool is_addr_all_mask(u8 *ipmask, int family) struct in_addr *addr; addr = (struct in_addr *)ipmask; - if (addr->s_addr == 0xffffffff) + if (ntohl(addr->s_addr) == 0xffffffff) return true; } else if (family == AF_INET6) { struct in6_addr *addr6; addr6 = (struct in6_addr *)ipmask; - if (addr6->s6_addr32[0] == 0xffffffff && - addr6->s6_addr32[1] == 0xffffffff && - addr6->s6_addr32[2] == 0xffffffff && - addr6->s6_addr32[3] == 0xffffffff) + if (ntohl(addr6->s6_addr32[0]) == 0xffffffff && + ntohl(addr6->s6_addr32[1]) == 0xffffffff && + ntohl(addr6->s6_addr32[2]) == 0xffffffff && + ntohl(addr6->s6_addr32[3]) == 0xffffffff) return true; } return false; From 1992ded5d111997877a9a25205976d8d03c46814 Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Wed, 24 Jun 2020 01:51:37 +0530 Subject: [PATCH 373/618] cxgb4: fix SGE queue dump destination buffer context The data in destination buffer is expected to be be parsed in big endian. So, use the right context. Fixes following sparse warning: cudbg_lib.c:2041:44: warning: incorrect type in assignment (different base types) cudbg_lib.c:2041:44: expected unsigned long long [usertype] cudbg_lib.c:2041:44: got restricted __be64 [usertype] Fixes: 736c3b94474e ("cxgb4: collect egress and ingress SGE queue contexts") Signed-off-by: Rahul Lakkireddy Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c b/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c index 7b9cd69f9844..d8ab8e366818 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c @@ -1975,7 +1975,6 @@ int cudbg_collect_dump_context(struct cudbg_init *pdbg_init, u8 mem_type[CTXT_INGRESS + 1] = { 0 }; struct cudbg_buffer temp_buff = { 0 }; struct cudbg_ch_cntxt *buff; - u64 *dst_off, *src_off; u8 *ctx_buf; u8 i, k; int rc; @@ -2044,8 +2043,11 @@ int cudbg_collect_dump_context(struct cudbg_init *pdbg_init, } for (j = 0; j < max_ctx_qid; j++) { + __be64 *dst_off; + u64 *src_off; + src_off = (u64 *)(ctx_buf + j * SGE_CTXT_SIZE); - dst_off = (u64 *)buff->data; + dst_off = (__be64 *)buff->data; /* The data is stored in 64-bit cpu order. Convert it * to big endian before parsing. From 2f6670165d22406467c667e9454e558bc75b933e Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Wed, 24 Jun 2020 01:51:38 +0530 Subject: [PATCH 374/618] cxgb4: remove cast when saving IPv4 partial checksum The checksum field in IPv4 header is in __sum16 and ip_fast_csum() also returns __sum16. So, no need to cast it to u16. Fixes following sparse warning: sge.c:1539:47: warning: cast from restricted __sum16 sge.c:1539:44: warning: incorrect type in assignment (different base types) sge.c:1539:44: expected restricted __sum16 [usertype] check sge.c:1539:44: got unsigned short [usertype] Fixes: d0a1299c6bf7 ("cxgb4: add support for vxlan segmentation offload") Signed-off-by: Rahul Lakkireddy Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/sge.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index 3c8b4b153ec4..72ff46b16704 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -1524,8 +1524,7 @@ static netdev_tx_t cxgb4_eth_xmit(struct sk_buff *skb, struct net_device *dev) if (iph->version == 4) { iph->check = 0; iph->tot_len = 0; - iph->check = (u16)(~ip_fast_csum((u8 *)iph, - iph->ihl)); + iph->check = ~ip_fast_csum((u8 *)iph, iph->ihl); } if (skb->ip_summed == CHECKSUM_PARTIAL) cntrl = hwcsum(adap->params.chip, skb); From bab3bcf3e9873e1e6e9cb39c1f55a05fb10415a4 Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Wed, 24 Jun 2020 01:51:39 +0530 Subject: [PATCH 375/618] cxgb4: move DCB version extern to header file Move the DCB version string array extern to header file. Fixes following sparse warning: cxgb4_dcb.c:13:12: warning: symbol 'dcb_ver_array' was not declared. Should it be static? Fixes: ebddd97afb89 ("cxgb4: add support to display DCB info") Signed-off-by: Rahul Lakkireddy Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h | 3 +++ drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c | 1 - 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h index d3c654b9989b..80c6627fe981 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h @@ -136,6 +136,9 @@ static inline __u8 bitswap_1(unsigned char val) ((val & 0x02) << 5) | ((val & 0x01) << 7); } + +extern const char * const dcb_ver_array[]; + #define CXGB4_DCB_ENABLED true #else /* !CONFIG_CHELSIO_T4_DCB */ diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c index 828499256004..b477b8842905 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c @@ -2379,7 +2379,6 @@ static const struct file_operations rss_vf_config_debugfs_fops = { }; #ifdef CONFIG_CHELSIO_T4_DCB -extern char *dcb_ver_array[]; /* Data Center Briging information for each port. */ From 00e31cfc8995de2a15352522fc672922a23b435e Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Wed, 24 Jun 2020 01:51:40 +0530 Subject: [PATCH 376/618] cxgb4: fix set but unused variable when DCB is disabled Remove the set but unused variable when DCB is disabled. Instead, do the calculation directly inline. Fixes following warning in make W=1: cxgb4_main.c: In function 'cfg_queues': cxgb4_main.c:5380:29: warning: variable 'n1g' set but not used [-Wunused-but-set-variable] u32 i, n10g = 0, qidx = 0, n1g = 0; ^ Fixes: 116ca924aea6 ("cxgb4: fix checks for max queues to allocate") Signed-off-by: Rahul Lakkireddy Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 1e66159de079..472e7c9e47bd 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -5377,10 +5377,10 @@ static inline bool is_x_10g_port(const struct link_config *lc) static int cfg_queues(struct adapter *adap) { u32 avail_qsets, avail_eth_qsets, avail_uld_qsets; - u32 i, n10g = 0, qidx = 0, n1g = 0; u32 ncpus = num_online_cpus(); u32 niqflint, neq, num_ulds; struct sge *s = &adap->sge; + u32 i, n10g = 0, qidx = 0; u32 q10g = 0, q1g; /* Reduce memory usage in kdump environment, disable all offload. */ @@ -5426,7 +5426,6 @@ static int cfg_queues(struct adapter *adap) if (n10g) q10g = (avail_eth_qsets - (adap->params.nports - n10g)) / n10g; - n1g = adap->params.nports - n10g; #ifdef CONFIG_CHELSIO_T4_DCB /* For Data Center Bridging support we need to be able to support up * to 8 Traffic Priorities; each of which will be assigned to its @@ -5444,7 +5443,8 @@ static int cfg_queues(struct adapter *adap) else q10g = max(8U, q10g); - while ((q10g * n10g) > (avail_eth_qsets - n1g * q1g)) + while ((q10g * n10g) > + (avail_eth_qsets - (adap->params.nports - n10g) * q1g)) q10g--; #else /* !CONFIG_CHELSIO_T4_DCB */ From 29bbf5d7f5efe84f94bc66c6c24614f812a95f62 Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Wed, 24 Jun 2020 01:51:41 +0530 Subject: [PATCH 377/618] cxgb4: update kernel-doc line comments Update several kernel-doc line comments to fix warnings reported by make W=1. Fixes following class of warnings reported by make W=1 in several places: l2t.c:616: warning: Cannot understand * @dev: net_device pointer t4_hw.c:3175: warning: Function parameter or member 'adap' not described in 't4_get_exprom_version' t4_hw.c:3175: warning: Excess function parameter 'adapter' description in 't4_get_exprom_version' Fixes: 56d36be4dd5f ("cxgb4: Add HW and FW support code") Fixes: fd3a47900b6f ("cxgb4: Add packet queues and packet DMA code") Fixes: 26f7cbc0a5a4 ("cxgb4: Don't attempt to upgrade T4 firmware when cxgb4 will end up as a slave") Fixes: 793dad94e745 ("RDMA/cxgb4: Fix bug for active and passive LE hash collision path") Fixes: ba3f8cd55f2a ("cxgb4: Add support in cxgb4 to get expansion rom version via ethtool") Fixes: f7502659cec8 ("cxgb4: Add API to alloc l2t entry; also update existing ones") Fixes: ddc7740d9a7c ("cxgb4: Decode link down reason code obtained from firmware") Fixes: 193c4c2845f7 ("cxgb4: Update T6 Buffer Group and Channel Mappings") Fixes: 8f46d46715a1 ("cxgb4: Use Firmware params to get buffer-group map") Fixes: a456950445a0 ("cxgb4: time stamping interface for PTP") Fixes: 9c33e4208bce ("cxgb4: Add PTP Hardware Clock (PHC) support") Fixes: c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Fixes: 5ccf9d049615 ("cxgb4: update API for TP indirect register access") Fixes: 3bdb376e6944 ("cxgb4: introduce SMT ops to prepare for SMAC rewrite support") Fixes: 736c3b94474e ("cxgb4: collect egress and ingress SGE queue contexts") Fixes: f56ec6766dcf ("cxgb4: Add support for ethtool i2c dump") Fixes: 9d5fd927d20b ("cxgb4/cxgb4vf: add support for ndo_set_vf_vlan") Fixes: 98f3697f8d41 ("cxgb4: add tc flower match support for tunnel VNI") Fixes: 02d805dc5fe3 ("cxgb4: use new fw interface to get the VIN and smt index") Fixes: 3f8cfd0d95e6 ("cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()") Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Fixes: 0e395b3cb1fb ("cxgb4: add FLOWC based QoS offload") Signed-off-by: Rahul Lakkireddy Signed-off-by: David S. Miller --- .../ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 2 +- .../net/ethernet/chelsio/cxgb4/cxgb4_main.c | 3 +- .../net/ethernet/chelsio/cxgb4/cxgb4_ptp.c | 3 +- drivers/net/ethernet/chelsio/cxgb4/l2t.c | 1 + drivers/net/ethernet/chelsio/cxgb4/sched.c | 2 +- drivers/net/ethernet/chelsio/cxgb4/sge.c | 19 +++++----- drivers/net/ethernet/chelsio/cxgb4/smt.c | 2 ++ drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 36 +++++++++---------- 8 files changed, 38 insertions(+), 30 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c index 9fd496732b2c..f27be1132d37 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c @@ -588,7 +588,7 @@ static void fw_caps_to_lmm(enum fw_port_type port_type, /** * lmm_to_fw_caps - translate ethtool Link Mode Mask to Firmware * capabilities - * @et_lmm: ethtool Link Mode Mask + * @link_mode_mask: ethtool Link Mode Mask * * Translate ethtool Link Mode Mask into a Firmware Port capabilities * value. diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 472e7c9e47bd..0329a6b52087 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -449,7 +449,7 @@ static int set_rxmode(struct net_device *dev, int mtu, bool sleep_ok) * or -1 * @addr: the new MAC address value * @persist: whether a new MAC allocation should be persistent - * @add_smt: if true also add the address to the HW SMT + * @smt_idx: the destination to store the new SMT index. * * Modifies an MPS filter and sets it to the new MAC address if * @tcam_idx >= 0, or adds the MAC address to a new filter if @@ -1615,6 +1615,7 @@ static int tid_init(struct tid_info *t) * @stid: the server TID * @sip: local IP address to bind server to * @sport: the server's TCP port + * @vlan: the VLAN header information * @queue: queue to direct messages from this server to * * Create an IP server for the given port and address. diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c index f5bc996ac77d..70dbee89118e 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c @@ -194,6 +194,7 @@ int cxgb4_ptp_redirect_rx_packet(struct adapter *adapter, struct port_info *pi) } /** + * cxgb4_ptp_adjfreq - Adjust frequency of PHC cycle counter * @ptp: ptp clock structure * @ppb: Desired frequency change in parts per billion * @@ -229,7 +230,7 @@ static int cxgb4_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb) /** * cxgb4_ptp_fineadjtime - Shift the time of the hardware clock - * @ptp: ptp clock structure + * @adapter: board private structure * @delta: Desired change in nanoseconds * * Adjust the timer by resetting the timecounter structure. diff --git a/drivers/net/ethernet/chelsio/cxgb4/l2t.c b/drivers/net/ethernet/chelsio/cxgb4/l2t.c index 0ed20a9cca14..c4864125fe02 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/l2t.c +++ b/drivers/net/ethernet/chelsio/cxgb4/l2t.c @@ -609,6 +609,7 @@ struct l2t_entry *t4_l2t_alloc_switching(struct adapter *adap, u16 vlan, } /** + * cxgb4_l2t_alloc_switching - Allocates an L2T entry for switch filters * @dev: net_device pointer * @vlan: VLAN Id * @port: Associated port diff --git a/drivers/net/ethernet/chelsio/cxgb4/sched.c b/drivers/net/ethernet/chelsio/cxgb4/sched.c index fde93c50cfec..a1b14468d1ff 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sched.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sched.c @@ -598,7 +598,7 @@ struct sched_class *cxgb4_sched_class_alloc(struct net_device *dev, /** * cxgb4_sched_class_free - free a scheduling class * @dev: net_device pointer - * @e: scheduling class + * @classid: scheduling class id to free * * Frees a scheduling class if there are no users. */ diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index 72ff46b16704..32a45dc51ed7 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -302,7 +302,7 @@ static void deferred_unmap_destructor(struct sk_buff *skb) /** * free_tx_desc - reclaims Tx descriptors and their buffers - * @adapter: the adapter + * @adap: the adapter * @q: the Tx queue to reclaim descriptors from * @n: the number of descriptors to reclaim * @unmap: whether the buffers should be unmapped for DMA @@ -722,6 +722,7 @@ static inline unsigned int flits_to_desc(unsigned int n) /** * is_eth_imm - can an Ethernet packet be sent as immediate data? * @skb: the packet + * @chip_ver: chip version * * Returns whether an Ethernet packet is small enough to fit as * immediate data. Return value corresponds to headroom required. @@ -749,6 +750,7 @@ static inline int is_eth_imm(const struct sk_buff *skb, unsigned int chip_ver) /** * calc_tx_flits - calculate the number of flits for a packet Tx WR * @skb: the packet + * @chip_ver: chip version * * Returns the number of flits needed for a Tx WR for the given Ethernet * packet, including the needed WR and CPL headers. @@ -804,6 +806,7 @@ static inline unsigned int calc_tx_flits(const struct sk_buff *skb, /** * calc_tx_descs - calculate the number of Tx descriptors for a packet * @skb: the packet + * @chip_ver: chip version * * Returns the number of Tx descriptors needed for the given Ethernet * packet, including the needed WR and CPL headers. @@ -2408,9 +2411,9 @@ static void eosw_txq_flush_pending_skbs(struct sge_eosw_txq *eosw_txq) /** * cxgb4_ethofld_send_flowc - Send ETHOFLD flowc request to bind eotid to tc. - * @dev - netdevice - * @eotid - ETHOFLD tid to bind/unbind - * @tc - traffic class. If set to FW_SCHED_CLS_NONE, then unbinds the @eotid + * @dev: netdevice + * @eotid: ETHOFLD tid to bind/unbind + * @tc: traffic class. If set to FW_SCHED_CLS_NONE, then unbinds the @eotid * * Send a FLOWC work request to bind an ETHOFLD TID to a traffic class. * If @tc is set to FW_SCHED_CLS_NONE, then the @eotid is unbound from @@ -2689,7 +2692,6 @@ static inline unsigned int calc_tx_flits_ofld(const struct sk_buff *skb) /** * txq_stop_maperr - stop a Tx queue due to I/O MMU exhaustion - * @adap: the adapter * @q: the queue to stop * * Mark a Tx queue stopped due to I/O MMU exhaustion and resulting @@ -3284,7 +3286,7 @@ enum { /** * t4_systim_to_hwstamp - read hardware time stamp - * @adap: the adapter + * @adapter: the adapter * @skb: the packet * * Read Time Stamp from MPS packet and insert in skb which @@ -3318,8 +3320,9 @@ static noinline int t4_systim_to_hwstamp(struct adapter *adapter, /** * t4_rx_hststamp - Recv PTP Event Message - * @adap: the adapter + * @adapter: the adapter * @rsp: the response queue descriptor holding the RX_PKT message + * @rxq: the response queue holding the RX_PKT message * @skb: the packet * * PTP enabled and MPS packet, read HW timestamp @@ -3343,7 +3346,7 @@ static int t4_rx_hststamp(struct adapter *adapter, const __be64 *rsp, /** * t4_tx_hststamp - Loopback PTP Transmit Event Message - * @adap: the adapter + * @adapter: the adapter * @skb: the packet * @dev: the ingress net device * diff --git a/drivers/net/ethernet/chelsio/cxgb4/smt.c b/drivers/net/ethernet/chelsio/cxgb4/smt.c index 01c65d13fc0e..cbe72ed27b1e 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/smt.c +++ b/drivers/net/ethernet/chelsio/cxgb4/smt.c @@ -103,6 +103,7 @@ static void t4_smte_free(struct smt_entry *e) } /** + * cxgb4_smt_release - Release SMT entry * @e: smt entry to release * * Releases ref count and frees up an smt entry from SMT table @@ -231,6 +232,7 @@ static struct smt_entry *t4_smt_alloc_switching(struct adapter *adap, u16 pfvf, } /** + * cxgb4_smt_alloc_switching - Allocates an SMT entry for switch filters. * @dev: net_device pointer * @smac: MAC address to add to SMT * Returns pointer to the SMT entry created diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 1c8068c02728..1aa6dc10dc0b 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -3163,7 +3163,7 @@ int t4_get_tp_version(struct adapter *adapter, u32 *vers) /** * t4_get_exprom_version - return the Expansion ROM version (if any) - * @adapter: the adapter + * @adap: the adapter * @vers: where to place the version * * Reads the Expansion ROM header from FLASH and returns the version @@ -5310,7 +5310,7 @@ static unsigned int t4_use_ldst(struct adapter *adap) * @cmd: TP fw ldst address space type * @vals: where the indirect register values are stored/written * @nregs: how many indirect registers to read/write - * @start_idx: index of first indirect register to read/write + * @start_index: index of first indirect register to read/write * @rw: Read (1) or Write (0) * @sleep_ok: if true we may sleep while awaiting command completion * @@ -6115,7 +6115,7 @@ void t4_pmrx_get_stats(struct adapter *adap, u32 cnt[], u64 cycles[]) /** * compute_mps_bg_map - compute the MPS Buffer Group Map for a Port - * @adap: the adapter + * @adapter: the adapter * @pidx: the port index * * Computes and returns a bitmap indicating which MPS buffer groups are @@ -6252,7 +6252,7 @@ static unsigned int t4_get_tp_e2c_map(struct adapter *adapter, int pidx) /** * t4_get_tp_ch_map - return TP ingress channels associated with a port - * @adapter: the adapter + * @adap: the adapter * @pidx: the port index * * Returns a bitmap indicating which TP Ingress Channels are associated @@ -6589,7 +6589,7 @@ int t4_mdio_rd(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, * @phy_addr: the PHY address * @mmd: the PHY MMD to access (0 for clause 22 PHYs) * @reg: the register to write - * @valp: value to write + * @val: value to write * * Issues a FW command through the given mailbox to write a PHY register. */ @@ -6615,7 +6615,7 @@ int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, /** * t4_sge_decode_idma_state - decode the idma state - * @adap: the adapter + * @adapter: the adapter * @state: the state idma is stuck in */ void t4_sge_decode_idma_state(struct adapter *adapter, int state) @@ -6782,7 +6782,7 @@ void t4_sge_decode_idma_state(struct adapter *adapter, int state) * t4_sge_ctxt_flush - flush the SGE context cache * @adap: the adapter * @mbox: mailbox to use for the FW command - * @ctx_type: Egress or Ingress + * @ctxt_type: Egress or Ingress * * Issues a FW command through the given mailbox to flush the * SGE context cache. @@ -6809,7 +6809,7 @@ int t4_sge_ctxt_flush(struct adapter *adap, unsigned int mbox, int ctxt_type) /** * t4_read_sge_dbqtimers - read SGE Doorbell Queue Timer values - * @adap - the adapter + * @adap: the adapter * @ndbqtimers: size of the provided SGE Doorbell Queue Timer table * @dbqtimers: SGE Doorbell Queue Timer table * @@ -7092,6 +7092,7 @@ static int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force) /** * t4_fw_restart - restart the firmware by taking the uP out of RESET * @adap: the adapter + * @mbox: mailbox to use for the FW command * @reset: if we want to do a RESET to restart things * * Restart firmware previously halted by t4_fw_halt(). On successful @@ -7630,6 +7631,8 @@ int t4_cfg_pfvf(struct adapter *adap, unsigned int mbox, unsigned int pf, * @nmac: number of MAC addresses needed (1 to 5) * @mac: the MAC addresses of the VI * @rss_size: size of RSS table slice associated with this VI + * @vivld: the destination to store the VI Valid value. + * @vin: the destination to store the VIN value. * * Allocates a virtual interface for the given physical port. If @mac is * not %NULL it contains the MAC addresses of the VI as assigned by FW. @@ -7848,7 +7851,7 @@ int t4_free_raw_mac_filt(struct adapter *adap, unsigned int viid, * t4_alloc_encap_mac_filt - Adds a mac entry in mps tcam with VNI support * @adap: the adapter * @viid: the VI id - * @mac: the MAC address + * @addr: the MAC address * @mask: the mask * @vni: the VNI id for the tunnel protocol * @vni_mask: mask for the VNI id @@ -7897,11 +7900,11 @@ int t4_alloc_encap_mac_filt(struct adapter *adap, unsigned int viid, * t4_alloc_raw_mac_filt - Adds a mac entry in mps tcam * @adap: the adapter * @viid: the VI id - * @mac: the MAC address + * @addr: the MAC address * @mask: the mask * @idx: index at which to add this entry - * @port_id: the port index * @lookup_type: MAC address for inner (1) or outer (0) header + * @port_id: the port index * @sleep_ok: call is allowed to sleep * * Adds the mac entry at the specified index using raw mac interface. @@ -8126,7 +8129,7 @@ int t4_free_mac_filt(struct adapter *adap, unsigned int mbox, * @idx: index of existing filter for old value of MAC address, or -1 * @addr: the new MAC address value * @persist: whether a new MAC allocation should be persistent - * @add_smt: if true also add the address to the HW SMT + * @smt_idx: the destination to store the new SMT index. * * Modifies an exact-match filter and sets it to the new MAC address. * Note that in general it is not possible to modify the value of a given @@ -8448,7 +8451,6 @@ int t4_ofld_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, /** * t4_link_down_rc_str - return a string for a Link Down Reason Code - * @adap: the adapter * @link_down_rc: Link Down Reason Code * * Returns a string representation of the Link Down Reason Code. @@ -8472,9 +8474,7 @@ static const char *t4_link_down_rc_str(unsigned char link_down_rc) return reason[link_down_rc]; } -/** - * Return the highest speed set in the port capabilities, in Mb/s. - */ +/* Return the highest speed set in the port capabilities, in Mb/s. */ static unsigned int fwcap_to_speed(fw_port_cap32_t caps) { #define TEST_SPEED_RETURN(__caps_speed, __speed) \ @@ -9110,7 +9110,6 @@ static int t4_get_flash_params(struct adapter *adap) /** * t4_prep_adapter - prepare SW and HW for operation * @adapter: the adapter - * @reset: if true perform a HW reset * * Initialize adapter SW state for the various HW modules, set initial * values for some adapter tunables, take PHYs out of reset, and @@ -10395,6 +10394,7 @@ int t4_sched_params(struct adapter *adapter, u8 type, u8 level, u8 mode, /** * t4_i2c_rd - read I2C data from adapter * @adap: the adapter + * @mbox: mailbox to use for the FW command * @port: Port number if per-port device; <0 if not * @devid: per-port device ID or absolute device ID * @offset: byte offset into device I2C space @@ -10450,7 +10450,7 @@ int t4_i2c_rd(struct adapter *adap, unsigned int mbox, int port, /** * t4_set_vlan_acl - Set a VLAN id for the specified VF - * @adapter: the adapter + * @adap: the adapter * @mbox: mailbox to use for the FW command * @vf: one of the VFs instantiated by the specified PF * @vlan: The vlanid to be set From 20bb0c8f2c446c55f5a4e296beaa77d62ffe2d1e Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Wed, 24 Jun 2020 01:51:42 +0530 Subject: [PATCH 378/618] cxgb4vf: update kernel-doc line comments Update several kernel-doc line comments to fix warnings reported by make W=1. Fixes following class of warnings reported by make W=1 in several places: cxgb4vf_main.c:275: warning: Function parameter or member 'persistent' not described in 'cxgb4vf_change_mac' cxgb4vf_main.c:275: warning: Excess function parameter 'persist' description in 'cxgb4vf_change_mac' Fixes: 16f8bd4be754 ("cxgb4vf: Add core T4 PCI-E SR-IOV Virtual Function hardware definitions and device communication code") Fixes: c6e0d91464da ("cxgb4vf: Add T4 Virtual Function Scatter-Gather Engine DMA code") Fixes: e0a8b34a9cc4 ("cxgb4vf: Add and initialize some sge params for VF driver") Fixes: c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Fixes: 0e23daeb6407 ("drivers/net: chelsio/cxgb*: Convert timers to use timer_setup()") Fixes: 3f8cfd0d95e6 ("cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()") Signed-off-by: Rahul Lakkireddy Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 3 +-- drivers/net/ethernet/chelsio/cxgb4vf/sge.c | 7 ++++--- drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c | 9 +++------ 3 files changed, 8 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c index cec865a97464..a7641be9094f 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c @@ -260,8 +260,7 @@ static int cxgb4vf_set_addr_hash(struct port_info *pi) * @tcam_idx: TCAM index of existing filter for old value of MAC address, * or -1 * @addr: the new MAC address value - * @persist: whether a new MAC allocation should be persistent - * @add_smt: if true also add the address to the HW SMT + * @persistent: whether a new MAC allocation should be persistent * * Modifies an MPS filter and sets it to the new MAC address if * @tcam_idx >= 0, or adds the MAC address to a new filter if diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c index f71c973398ec..8c3d6e11a4bf 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c @@ -1692,7 +1692,7 @@ static inline bool is_new_response(const struct rsp_ctrl *rc, * restore_rx_bufs - put back a packet's RX buffers * @gl: the packet gather list * @fl: the SGE Free List - * @nfrags: how many fragments in @si + * @frags: how many fragments in @si * * Called when we find out that the current packet, @si, can't be * processed right away for some reason. This is a very rare event and @@ -2054,7 +2054,7 @@ irq_handler_t t4vf_intr_handler(struct adapter *adapter) /** * sge_rx_timer_cb - perform periodic maintenance of SGE RX queues - * @data: the adapter + * @t: Rx timer * * Runs periodically from a timer to perform maintenance of SGE RX queues. * @@ -2113,7 +2113,7 @@ static void sge_rx_timer_cb(struct timer_list *t) /** * sge_tx_timer_cb - perform periodic maintenance of SGE Tx queues - * @data: the adapter + * @t: Tx timer * * Runs periodically from a timer to perform maintenance of SGE TX queues. * @@ -2405,6 +2405,7 @@ int t4vf_sge_alloc_rxq(struct adapter *adapter, struct sge_rspq *rspq, * t4vf_sge_alloc_eth_txq - allocate an SGE Ethernet TX Queue * @adapter: the adapter * @txq: pointer to the new txq to be filled in + * @dev: the network device * @devq: the network TX queue associated with the new txq * @iqid: the relative ingress queue ID to which events relating to * the new txq should be directed diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c index 9d49ff211cc1..a31b87390b50 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c @@ -389,9 +389,7 @@ static inline enum cc_fec fwcap_to_cc_fec(fw_port_cap32_t fw_fec) return cc_fec; } -/** - * Return the highest speed set in the port capabilities, in Mb/s. - */ +/* Return the highest speed set in the port capabilities, in Mb/s. */ static unsigned int fwcap_to_speed(fw_port_cap32_t caps) { #define TEST_SPEED_RETURN(__caps_speed, __speed) \ @@ -1467,6 +1465,7 @@ int t4vf_identify_port(struct adapter *adapter, unsigned int viid, * @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change * @vlanex: 1 to enable hardware VLAN Tag extraction, 0 to disable it, * -1 no change + * @sleep_ok: call is allowed to sleep * * Sets Rx properties of a virtual interface. */ @@ -1906,7 +1905,7 @@ static const char *t4vf_link_down_rc_str(unsigned char link_down_rc) /** * t4vf_handle_get_port_info - process a FW reply message * @pi: the port info - * @rpl: start of the FW message + * @cmd: start of the FW message * * Processes a GET_PORT_INFO FW reply message. */ @@ -2137,8 +2136,6 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl) return 0; } -/** - */ int t4vf_prep_adapter(struct adapter *adapter) { int err; From 23e390cdbe6f85827a43d38f9288dcd3066fa376 Mon Sep 17 00:00:00 2001 From: KP Singh Date: Mon, 22 Jun 2020 00:21:35 +0200 Subject: [PATCH 379/618] security: Fix hook iteration and default value for inode_copy_up_xattr inode_copy_up_xattr returns 0 to indicate the acceptance of the xattr and 1 to reject it. If the LSM does not know about the xattr, it's expected to return -EOPNOTSUPP, which is the correct default value for this hook. BPF LSM, currently, uses 0 as the default value and thereby falsely allows all overlay fs xattributes to be copied up. The iteration logic is also updated from the "bail-on-fail" call_int_hook to continue on the non-decisive -EOPNOTSUPP and bail out on other values. Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks") Signed-off-by: KP Singh Signed-off-by: James Morris --- include/linux/lsm_hook_defs.h | 2 +- security/security.c | 17 ++++++++++++++++- 2 files changed, 17 insertions(+), 2 deletions(-) diff --git a/include/linux/lsm_hook_defs.h b/include/linux/lsm_hook_defs.h index 24f6683f1cfc..af998f93d256 100644 --- a/include/linux/lsm_hook_defs.h +++ b/include/linux/lsm_hook_defs.h @@ -150,7 +150,7 @@ LSM_HOOK(int, 0, inode_listsecurity, struct inode *inode, char *buffer, size_t buffer_size) LSM_HOOK(void, LSM_RET_VOID, inode_getsecid, struct inode *inode, u32 *secid) LSM_HOOK(int, 0, inode_copy_up, struct dentry *src, struct cred **new) -LSM_HOOK(int, 0, inode_copy_up_xattr, const char *name) +LSM_HOOK(int, -EOPNOTSUPP, inode_copy_up_xattr, const char *name) LSM_HOOK(int, 0, kernfs_init_security, struct kernfs_node *kn_dir, struct kernfs_node *kn) LSM_HOOK(int, 0, file_permission, struct file *file, int mask) diff --git a/security/security.c b/security/security.c index 0ce3e73edd42..70a7ad357bc6 100644 --- a/security/security.c +++ b/security/security.c @@ -1414,7 +1414,22 @@ EXPORT_SYMBOL(security_inode_copy_up); int security_inode_copy_up_xattr(const char *name) { - return call_int_hook(inode_copy_up_xattr, -EOPNOTSUPP, name); + struct security_hook_list *hp; + int rc; + + /* + * The implementation can return 0 (accept the xattr), 1 (discard the + * xattr), -EOPNOTSUPP if it does not know anything about the xattr or + * any other error code incase of an error. + */ + hlist_for_each_entry(hp, + &security_hook_heads.inode_copy_up_xattr, list) { + rc = hp->hook.inode_copy_up_xattr(name); + if (rc != LSM_RET_DEFAULT(inode_copy_up_xattr)) + return rc; + } + + return LSM_RET_DEFAULT(inode_copy_up_xattr); } EXPORT_SYMBOL(security_inode_copy_up_xattr); From 6b69040247e14b43419a520f841f2b3052833df9 Mon Sep 17 00:00:00 2001 From: Zhang Xiaoxu Date: Tue, 23 Jun 2020 07:31:54 -0400 Subject: [PATCH 380/618] cifs/smb3: Fix data inconsistent when zero file range CIFS implements the fallocate(FALLOC_FL_ZERO_RANGE) with send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the remote file to zero, but local page cache not update, then the data inconsistent with server, which leads the xfstest generic/008 failed. So we need to remove the local page caches before send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. After next read, it will re-cache it. Fixes: 30175628bf7f5 ("[SMB3] Enable fallocate -z support for SMB3 mounts") Reported-by: Hulk Robot Signed-off-by: Zhang Xiaoxu Reviewed-by: Pavel Shilovsky Cc: stable@vger.kernel.org # v3.17 Signed-off-by: Steve French --- fs/cifs/smb2ops.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index 28553d45604e..876a0d9e3d46 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -3188,6 +3188,11 @@ static long smb3_zero_range(struct file *file, struct cifs_tcon *tcon, trace_smb3_zero_enter(xid, cfile->fid.persistent_fid, tcon->tid, ses->Suid, offset, len); + /* + * We zero the range through ioctl, so we need remove the page caches + * first, otherwise the data may be inconsistent with the server. + */ + truncate_pagecache_range(inode, offset, offset + len - 1); /* if file not oplocked can't be sure whether asking to extend size */ if (!CIFS_CACHE_READ(cifsi)) From acc91c2d8de4ef46ed751c5f9df99ed9a109b100 Mon Sep 17 00:00:00 2001 From: Zhang Xiaoxu Date: Tue, 23 Jun 2020 07:31:53 -0400 Subject: [PATCH 381/618] cifs/smb3: Fix data inconsistent when punch hole When punch hole success, we also can read old data from file: # strace -e trace=pread64,fallocate xfs_io -f -c "pread 20 40" \ -c "fpunch 20 40" -c"pread 20 40" file pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40 fallocate(3, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 20, 40) = 0 pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40 CIFS implements the fallocate(FALLOCATE_FL_PUNCH_HOLE) with send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the remote file to zero, but local page caches not updated, then the local page caches inconsistent with server. Also can be found by xfstests generic/316. So, we need to remove the page caches before send the SMB ioctl(FSCTL_SET_ZERO_DATA) to server. Fixes: 31742c5a33176 ("enable fallocate punch hole ("fallocate -p") for SMB3") Suggested-by: Pavel Shilovsky Reviewed-by: Pavel Shilovsky Signed-off-by: Zhang Xiaoxu Cc: stable@vger.kernel.org # v3.17 Signed-off-by: Steve French --- fs/cifs/smb2ops.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index 876a0d9e3d46..d9fdafa5eb60 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -3259,6 +3259,12 @@ static long smb3_punch_hole(struct file *file, struct cifs_tcon *tcon, return rc; } + /* + * We implement the punch hole through ioctl, so we need remove the page + * caches first, otherwise the data may be inconsistent with the server. + */ + truncate_pagecache_range(inode, offset, offset + len - 1); + cifs_dbg(FYI, "Offset %lld len %lld\n", offset, len); fsctl_buf.FileOffset = cpu_to_le64(offset); From 5618303d8516f8ac5ecfe53ee8e8bc9a40eaf066 Mon Sep 17 00:00:00 2001 From: Zhang Xiaoxu Date: Fri, 19 Jun 2020 22:51:29 -0400 Subject: [PATCH 382/618] cifs: update ctime and mtime during truncate As the man description of the truncate, if the size changed, then the st_ctime and st_mtime fields should be updated. But in cifs, we doesn't do it. It lead the xfstests generic/313 failed. So, add the ATTR_MTIME|ATTR_CTIME flags on attrs when change the file size Reported-by: Hulk Robot Signed-off-by: Zhang Xiaoxu Signed-off-by: Steve French --- fs/cifs/inode.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 583f5e4008c2..ce95801e9b66 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -2535,6 +2535,15 @@ cifs_set_file_size(struct inode *inode, struct iattr *attrs, if (rc == 0) { cifsInode->server_eof = attrs->ia_size; cifs_setsize(inode, attrs->ia_size); + + /* + * The man page of truncate says if the size changed, + * then the st_ctime and st_mtime fields for the file + * are updated. + */ + attrs->ia_ctime = attrs->ia_mtime = current_time(inode); + attrs->ia_valid |= ATTR_CTIME | ATTR_MTIME; + cifs_truncate_page(inode->i_mapping, inode->i_size); } From bf1028a41eaf0ce39518cbdda34cdb717f16364a Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 15 Jun 2020 17:41:12 -0500 Subject: [PATCH 383/618] cifs: misc: Use array_size() in if-statement controlling expression Use array_size() instead of the open-coded version in the controlling expression of the if statement. Also, while there, use the preferred form for passing a size of a struct. The alternative form where struct name is spelled out hurts readability and introduces an opportunity for a bug when the pointer variable type is changed but the corresponding sizeof that is passed as argument is not. This issue was found with the help of Coccinelle and, audited and fixed manually. Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83 Signed-off-by: Gustavo A. R. Silva Signed-off-by: Steve French Reviewed-by: Aurelien Aptel Reviewed-by: Kees Cook Signed-off-by: Steve French --- fs/cifs/misc.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 56791a692c8b..e44d049142d0 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -844,28 +844,26 @@ setup_aio_ctx_iter(struct cifs_aio_ctx *ctx, struct iov_iter *iter, int rw) struct bio_vec *bv = NULL; if (iov_iter_is_kvec(iter)) { - memcpy(&ctx->iter, iter, sizeof(struct iov_iter)); + memcpy(&ctx->iter, iter, sizeof(*iter)); ctx->len = count; iov_iter_advance(iter, count); return 0; } - if (max_pages * sizeof(struct bio_vec) <= CIFS_AIO_KMALLOC_LIMIT) - bv = kmalloc_array(max_pages, sizeof(struct bio_vec), - GFP_KERNEL); + if (array_size(max_pages, sizeof(*bv)) <= CIFS_AIO_KMALLOC_LIMIT) + bv = kmalloc_array(max_pages, sizeof(*bv), GFP_KERNEL); if (!bv) { - bv = vmalloc(array_size(max_pages, sizeof(struct bio_vec))); + bv = vmalloc(array_size(max_pages, sizeof(*bv))); if (!bv) return -ENOMEM; } - if (max_pages * sizeof(struct page *) <= CIFS_AIO_KMALLOC_LIMIT) - pages = kmalloc_array(max_pages, sizeof(struct page *), - GFP_KERNEL); + if (array_size(max_pages, sizeof(*pages)) <= CIFS_AIO_KMALLOC_LIMIT) + pages = kmalloc_array(max_pages, sizeof(*pages), GFP_KERNEL); if (!pages) { - pages = vmalloc(array_size(max_pages, sizeof(struct page *))); + pages = vmalloc(array_size(max_pages, sizeof(*pages))); if (!pages) { kvfree(bv); return -ENOMEM; From 586745f1598ccf71b0a5a6df2222dee0a865954e Mon Sep 17 00:00:00 2001 From: yu kuai Date: Thu, 4 Jun 2020 20:42:06 +0800 Subject: [PATCH 384/618] ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() if of_find_device_by_node() succeed, imx_suspend_alloc_ocram() doesn't have a corresponding put_device(). Thus add a jump target to fix the exception handling for this function implementation. Fixes: 1579c7b9fe01 ("ARM: imx53: Set DDR pins to high impedance when in suspend to RAM.") Signed-off-by: yu kuai Signed-off-by: Shawn Guo --- arch/arm/mach-imx/pm-imx5.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c index f057df813f83..e9962b48e30c 100644 --- a/arch/arm/mach-imx/pm-imx5.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -295,14 +295,14 @@ static int __init imx_suspend_alloc_ocram( if (!ocram_pool) { pr_warn("%s: ocram pool unavailable!\n", __func__); ret = -ENODEV; - goto put_node; + goto put_device; } ocram_base = gen_pool_alloc(ocram_pool, size); if (!ocram_base) { pr_warn("%s: unable to alloc ocram!\n", __func__); ret = -ENOMEM; - goto put_node; + goto put_device; } phys = gen_pool_virt_to_phys(ocram_pool, ocram_base); @@ -312,6 +312,8 @@ static int __init imx_suspend_alloc_ocram( if (virt_out) *virt_out = virt; +put_device: + put_device(&pdev->dev); put_node: of_node_put(node); From 4845446036fc9c13f43b54a65c9b757c14f5141b Mon Sep 17 00:00:00 2001 From: yu kuai Date: Thu, 4 Jun 2020 20:54:49 +0800 Subject: [PATCH 385/618] ARM: imx6: add missing put_device() call in imx6q_suspend_init() if of_find_device_by_node() succeed, imx6q_suspend_init() doesn't have a corresponding put_device(). Thus add a jump target to fix the exception handling for this function implementation. Signed-off-by: yu kuai Signed-off-by: Shawn Guo --- arch/arm/mach-imx/pm-imx6.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index dd34dff13762..40c74b4c4d73 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -493,14 +493,14 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) if (!ocram_pool) { pr_warn("%s: ocram pool unavailable!\n", __func__); ret = -ENODEV; - goto put_node; + goto put_device; } ocram_base = gen_pool_alloc(ocram_pool, MX6Q_SUSPEND_OCRAM_SIZE); if (!ocram_base) { pr_warn("%s: unable to alloc ocram!\n", __func__); ret = -ENOMEM; - goto put_node; + goto put_device; } ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base); @@ -523,7 +523,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) ret = imx6_pm_get_base(&pm_info->mmdc_base, socdata->mmdc_compat); if (ret) { pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret); - goto put_node; + goto put_device; } ret = imx6_pm_get_base(&pm_info->src_base, socdata->src_compat); @@ -570,7 +570,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) &imx6_suspend, MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info)); - goto put_node; + goto put_device; pl310_cache_map_failed: iounmap(pm_info->gpc_base.vbase); @@ -580,6 +580,8 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) iounmap(pm_info->src_base.vbase); src_map_failed: iounmap(pm_info->mmdc_base.vbase); +put_device: + put_device(&pdev->dev); put_node: of_node_put(node); From 3c597282887fd55181578996dca52ce697d985a5 Mon Sep 17 00:00:00 2001 From: Gao Xiang Date: Fri, 19 Jun 2020 07:43:49 +0800 Subject: [PATCH 386/618] erofs: fix partially uninitialized misuse in z_erofs_onlinepage_fixup Hongyu reported "id != index" in z_erofs_onlinepage_fixup() with specific aarch64 environment easily, which wasn't shown before. After digging into that, I found that high 32 bits of page->private was set to 0xaaaaaaaa rather than 0 (due to z_erofs_onlinepage_init behavior with specific compiler options). Actually we only use low 32 bits to keep the page information since page->private is only 4 bytes on most 32-bit platforms. However z_erofs_onlinepage_fixup() uses the upper 32 bits by mistake. Let's fix it now. Reported-and-tested-by: Hongyu Jin Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support") Cc: # 4.19+ Reviewed-by: Chao Yu Link: https://lore.kernel.org/r/20200618234349.22553-1-hsiangkao@aol.com Signed-off-by: Gao Xiang --- fs/erofs/zdata.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fs/erofs/zdata.h b/fs/erofs/zdata.h index 7824f5563a55..9b66c28b3ae9 100644 --- a/fs/erofs/zdata.h +++ b/fs/erofs/zdata.h @@ -144,22 +144,22 @@ static inline void z_erofs_onlinepage_init(struct page *page) static inline void z_erofs_onlinepage_fixup(struct page *page, uintptr_t index, bool down) { - unsigned long *p, o, v, id; -repeat: - p = &page_private(page); - o = READ_ONCE(*p); + union z_erofs_onlinepage_converter u = { .v = &page_private(page) }; + int orig, orig_index, val; - id = o >> Z_EROFS_ONLINEPAGE_INDEX_SHIFT; - if (id) { +repeat: + orig = atomic_read(u.o); + orig_index = orig >> Z_EROFS_ONLINEPAGE_INDEX_SHIFT; + if (orig_index) { if (!index) return; - DBG_BUGON(id != index); + DBG_BUGON(orig_index != index); } - v = (index << Z_EROFS_ONLINEPAGE_INDEX_SHIFT) | - ((o & Z_EROFS_ONLINEPAGE_COUNT_MASK) + (unsigned int)down); - if (cmpxchg(p, o, v) != o) + val = (index << Z_EROFS_ONLINEPAGE_INDEX_SHIFT) | + ((orig & Z_EROFS_ONLINEPAGE_COUNT_MASK) + (unsigned int)down); + if (atomic_cmpxchg(u.o, orig, val) != orig) goto repeat; } From 6c95503c292610ff2898b4271c510c16efdcd4e1 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Sat, 20 Jun 2020 12:45:54 +0900 Subject: [PATCH 387/618] tracing/boot: Fix config dependency for synthedic event Since commit 726721a51838 ("tracing: Move synthetic events to a separate file") decoupled synthetic event from histogram, boot-time tracing also has to check CONFIG_SYNTH_EVENT instead of CONFIG_HIST_TRIGGERS. Link: http://lkml.kernel.org/r/159262475441.185015.5300725180746017555.stgit@devnote2 Fixes: 726721a51838 ("tracing: Move synthetic events to a separate file") Reviewed-by: Tom Zanussi Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_boot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace_boot.c b/kernel/trace/trace_boot.c index 9de29bb45a27..8b5490cb02bb 100644 --- a/kernel/trace/trace_boot.c +++ b/kernel/trace/trace_boot.c @@ -120,7 +120,7 @@ trace_boot_add_kprobe_event(struct xbc_node *node, const char *event) } #endif -#ifdef CONFIG_HIST_TRIGGERS +#ifdef CONFIG_SYNTH_EVENTS static int __init trace_boot_add_synth_event(struct xbc_node *node, const char *event) { From 6784beada631800f2c5afd567e5628c843362cee Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Sat, 20 Jun 2020 12:46:03 +0900 Subject: [PATCH 388/618] tracing: Fix event trigger to accept redundant spaces Fix the event trigger to accept redundant spaces in the trigger input. For example, these return -EINVAL echo " traceon" > events/ftrace/print/trigger echo "traceon if common_pid == 0" > events/ftrace/print/trigger echo "disable_event:kmem:kmalloc " > events/ftrace/print/trigger But these are hard to find what is wrong. To fix this issue, use skip_spaces() to remove spaces in front of actual tokens, and set NULL if there is no token. Link: http://lkml.kernel.org/r/159262476352.185015.5261566783045364186.stgit@devnote2 Cc: Tom Zanussi Cc: stable@vger.kernel.org Fixes: 85f2b08268c0 ("tracing: Add basic event trigger framework") Reviewed-by: Tom Zanussi Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_events_trigger.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace_events_trigger.c b/kernel/trace/trace_events_trigger.c index 3a74736da363..f725802160c0 100644 --- a/kernel/trace/trace_events_trigger.c +++ b/kernel/trace/trace_events_trigger.c @@ -216,11 +216,17 @@ static int event_trigger_regex_open(struct inode *inode, struct file *file) int trigger_process_regex(struct trace_event_file *file, char *buff) { - char *command, *next = buff; + char *command, *next; struct event_command *p; int ret = -EINVAL; + next = buff = skip_spaces(buff); command = strsep(&next, ": \t"); + if (next) { + next = skip_spaces(next); + if (!*next) + next = NULL; + } command = (command[0] != '!') ? command : command + 1; mutex_lock(&trigger_cmd_mutex); @@ -630,8 +636,14 @@ event_trigger_callback(struct event_command *cmd_ops, int ret; /* separate the trigger from the filter (t:n [if filter]) */ - if (param && isdigit(param[0])) + if (param && isdigit(param[0])) { trigger = strsep(¶m, " \t"); + if (param) { + param = skip_spaces(param); + if (!*param) + param = NULL; + } + } trigger_ops = cmd_ops->get_trigger_ops(cmd, trigger); @@ -1368,6 +1380,11 @@ int event_enable_trigger_func(struct event_command *cmd_ops, trigger = strsep(¶m, " \t"); if (!trigger) return -EINVAL; + if (param) { + param = skip_spaces(param); + if (!*param) + param = NULL; + } system = strsep(&trigger, ":"); if (!trigger) From 20dc3847cc2fc886ee4eb9112e6e2fad9419b0c7 Mon Sep 17 00:00:00 2001 From: Sascha Ortmann Date: Thu, 18 Jun 2020 18:33:01 +0200 Subject: [PATCH 389/618] tracing/boottime: Fix kprobe multiple events Fix boottime kprobe events to report and abort after each failure when adding probes. As an example, when we try to set multiprobe kprobe events in bootconfig like this: ftrace.event.kprobes.vfsevents { probes = "vfs_read $arg1 $arg2,, !error! not reported;?", // leads to error "vfs_write $arg1 $arg2" } This will not work as expected. After commit da0f1f4167e3af69e ("tracing/boottime: Fix kprobe event API usage"), the function trace_boot_add_kprobe_event will not produce any error message when adding a probe fails at kprobe_event_gen_cmd_start. Furthermore, we continue to add probes when kprobe_event_gen_cmd_end fails (and kprobe_event_gen_cmd_start did not fail). In this case the function even returns successfully when the last call to kprobe_event_gen_cmd_end is successful. The behaviour of reporting and aborting after failures is not consistent. The function trace_boot_add_kprobe_event now reports each failure and stops adding probes immediately. Link: https://lkml.kernel.org/r/20200618163301.25854-1-sascha.ortmann@stud.uni-hannover.de Cc: stable@vger.kernel.org Cc: linux-kernel@i4.cs.fau.de Co-developed-by: Maximilian Werner Fixes: da0f1f4167e3 ("tracing/boottime: Fix kprobe event API usage") Acked-by: Masami Hiramatsu Signed-off-by: Maximilian Werner Signed-off-by: Sascha Ortmann Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_boot.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace_boot.c b/kernel/trace/trace_boot.c index 8b5490cb02bb..fa0fc08c6ef8 100644 --- a/kernel/trace/trace_boot.c +++ b/kernel/trace/trace_boot.c @@ -101,12 +101,16 @@ trace_boot_add_kprobe_event(struct xbc_node *node, const char *event) kprobe_event_cmd_init(&cmd, buf, MAX_BUF_LEN); ret = kprobe_event_gen_cmd_start(&cmd, event, val); - if (ret) + if (ret) { + pr_err("Failed to generate probe: %s\n", buf); break; + } ret = kprobe_event_gen_cmd_end(&cmd); - if (ret) + if (ret) { pr_err("Failed to add probe: %s\n", buf); + break; + } } return ret; From d0ad2ea2bc185835f8a749302ad07b70528d2a09 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 23 Jun 2020 19:01:35 -0400 Subject: [PATCH 390/618] bnxt_en: Store the running firmware version code. We currently only store the firmware version as a string for ethtool and devlink info. Store it also as a version code. The next 2 patches will need to check the firmware major version to determine some workarounds. We also use the 16-bit firmware version fields if the firmware is newer and provides the 16-bit fields. Reviewed-by: Edwin Peer Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 22 ++++++++++++++++++---- drivers/net/ethernet/broadcom/bnxt/bnxt.h | 4 ++++ 2 files changed, 22 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index b93e05f91d77..0ad8d490975e 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -7240,8 +7240,9 @@ static int __bnxt_hwrm_ver_get(struct bnxt *bp, bool silent) static int bnxt_hwrm_ver_get(struct bnxt *bp) { struct hwrm_ver_get_output *resp = bp->hwrm_cmd_resp_addr; + u16 fw_maj, fw_min, fw_bld, fw_rsv; u32 dev_caps_cfg, hwrm_ver; - int rc; + int rc, len; bp->hwrm_max_req_len = HWRM_MAX_REQ_LEN; mutex_lock(&bp->hwrm_cmd_lock); @@ -7273,9 +7274,22 @@ static int bnxt_hwrm_ver_get(struct bnxt *bp) resp->hwrm_intf_maj_8b, resp->hwrm_intf_min_8b, resp->hwrm_intf_upd_8b); - snprintf(bp->fw_ver_str, BC_HWRM_STR_LEN, "%d.%d.%d.%d", - resp->hwrm_fw_maj_8b, resp->hwrm_fw_min_8b, - resp->hwrm_fw_bld_8b, resp->hwrm_fw_rsvd_8b); + fw_maj = le16_to_cpu(resp->hwrm_fw_major); + if (bp->hwrm_spec_code > 0x10803 && fw_maj) { + fw_min = le16_to_cpu(resp->hwrm_fw_minor); + fw_bld = le16_to_cpu(resp->hwrm_fw_build); + fw_rsv = le16_to_cpu(resp->hwrm_fw_patch); + len = FW_VER_STR_LEN; + } else { + fw_maj = resp->hwrm_fw_maj_8b; + fw_min = resp->hwrm_fw_min_8b; + fw_bld = resp->hwrm_fw_bld_8b; + fw_rsv = resp->hwrm_fw_rsvd_8b; + len = BC_HWRM_STR_LEN; + } + bp->fw_ver_code = BNXT_FW_VER_CODE(fw_maj, fw_min, fw_bld, fw_rsv); + snprintf(bp->fw_ver_str, len, "%d.%d.%d.%d", fw_maj, fw_min, fw_bld, + fw_rsv); if (strlen(resp->active_pkg_name)) { int fw_ver_len = strlen(bp->fw_ver_str); diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index 9e173d74b72a..858440e1dcdc 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -1746,6 +1746,10 @@ struct bnxt { #define PHY_VER_STR_LEN (FW_VER_STR_LEN - BC_HWRM_STR_LEN) char fw_ver_str[FW_VER_STR_LEN]; char hwrm_ver_supp[FW_VER_STR_LEN]; + u64 fw_ver_code; +#define BNXT_FW_VER_CODE(maj, min, bld, rsv) \ + ((u64)(maj) << 48 | (u64)(min) << 32 | (u64)(bld) << 16 | (rsv)) + __be16 vxlan_port; u8 vxlan_port_cnt; __le16 vxlan_fw_dst_port_id; From fed7edd18143c68c63ea049999a7e861123de6de Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 23 Jun 2020 19:01:36 -0400 Subject: [PATCH 391/618] bnxt_en: Do not enable legacy TX push on older firmware. Older firmware may not support legacy TX push properly and may not be disabling it. So we check certain firmware versions that may have this problem and disable legacy TX push unconditionally. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Edwin Peer Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 ++- drivers/net/ethernet/broadcom/bnxt/bnxt.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 0ad8d490975e..f8c50b1d2331 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -6976,7 +6976,8 @@ static int __bnxt_hwrm_func_qcaps(struct bnxt *bp) bp->fw_cap |= BNXT_FW_CAP_ERR_RECOVER_RELOAD; bp->tx_push_thresh = 0; - if (flags & FUNC_QCAPS_RESP_FLAGS_PUSH_MODE_SUPPORTED) + if ((flags & FUNC_QCAPS_RESP_FLAGS_PUSH_MODE_SUPPORTED) && + BNXT_FW_MAJ(bp) > 217) bp->tx_push_thresh = BNXT_TX_PUSH_THRESH; hw_resc->max_rsscos_ctxs = le16_to_cpu(resp->max_rsscos_ctx); diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index 858440e1dcdc..78e2fd63ac3d 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -1749,6 +1749,7 @@ struct bnxt { u64 fw_ver_code; #define BNXT_FW_VER_CODE(maj, min, bld, rsv) \ ((u64)(maj) << 48 | (u64)(min) << 32 | (u64)(bld) << 16 | (rsv)) +#define BNXT_FW_MAJ(bp) ((bp)->fw_ver_code >> 48) __be16 vxlan_port; u8 vxlan_port_cnt; From c2dec363feb41544a76c8083aca2378990e17166 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 23 Jun 2020 19:01:37 -0400 Subject: [PATCH 392/618] bnxt_en: Fix statistics counters issue during ifdown with older firmware. On older firmware, the hardware statistics are not cleared when the driver frees the hardware stats contexts during ifdown. The driver expects these stats to be cleared and saves a copy before freeing the stats contexts. During the next ifup, the driver will likely allocate the same hardware stats contexts and this will cause a big increase in the counters as the old counters are added back to the saved counters. We fix it by making an additional firmware call to clear the counters before freeing the hw stats contexts when the firmware is the older 20.x firmware. Fixes: b8875ca356f1 ("bnxt_en: Save ring statistics before reset.") Reported-by: Jakub Kicinski Reviewed-by: Vasundhara Volam Signed-off-by: Michael Chan Tested-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index f8c50b1d2331..6dc7cc4df9e8 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -6292,6 +6292,7 @@ int bnxt_hwrm_set_coal(struct bnxt *bp) static void bnxt_hwrm_stat_ctx_free(struct bnxt *bp) { + struct hwrm_stat_ctx_clr_stats_input req0 = {0}; struct hwrm_stat_ctx_free_input req = {0}; int i; @@ -6301,6 +6302,7 @@ static void bnxt_hwrm_stat_ctx_free(struct bnxt *bp) if (BNXT_CHIP_TYPE_NITRO_A0(bp)) return; + bnxt_hwrm_cmd_hdr_init(bp, &req0, HWRM_STAT_CTX_CLR_STATS, -1, -1); bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_STAT_CTX_FREE, -1, -1); mutex_lock(&bp->hwrm_cmd_lock); @@ -6310,7 +6312,11 @@ static void bnxt_hwrm_stat_ctx_free(struct bnxt *bp) if (cpr->hw_stats_ctx_id != INVALID_STATS_CTX_ID) { req.stat_ctx_id = cpu_to_le32(cpr->hw_stats_ctx_id); - + if (BNXT_FW_MAJ(bp) <= 20) { + req0.stat_ctx_id = req.stat_ctx_id; + _hwrm_send_message(bp, &req0, sizeof(req0), + HWRM_CMD_TIMEOUT); + } _hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT); From c55e28a8b43fcd7dc71868bd165705bc7741a7ca Mon Sep 17 00:00:00 2001 From: Vasundhara Volam Date: Tue, 23 Jun 2020 19:01:38 -0400 Subject: [PATCH 393/618] bnxt_en: Read VPD info only for PFs Virtual functions does not have VPD information. This patch modifies calling bnxt_read_vpd_info() only for PFs and avoids an unnecessary error log. Fixes: a0d0fd70fed5 ("bnxt_en: Read partno and serialno of the board from VPD") Signed-off-by: Vasundhara Volam Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 6dc7cc4df9e8..6a884df44612 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -11913,7 +11913,8 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) dev->ethtool_ops = &bnxt_ethtool_ops; pci_set_drvdata(pdev, dev); - bnxt_vpd_read_info(bp); + if (BNXT_PF(bp)) + bnxt_vpd_read_info(bp); rc = bnxt_alloc_hwrm_resources(bp); if (rc) From 4b973f49830d74de36b5f4a75c07f6658524d2e4 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 24 Jun 2020 03:25:45 +0200 Subject: [PATCH 394/618] net: ethtool: Handle missing cable test TDR parameters A last minute change put the TDR cable test parameters into a nest. The validation is not sufficient, resulting in an oops if the nest is missing. Set default values first, then update them if the nest is provided. Fixes: f2bc8ad31a7f ("net: ethtool: Allow PHY cable test TDR data to configured") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- net/ethtool/cabletest.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/net/ethtool/cabletest.c b/net/ethtool/cabletest.c index 7b7a0456c15c..7194956aa09e 100644 --- a/net/ethtool/cabletest.c +++ b/net/ethtool/cabletest.c @@ -234,6 +234,14 @@ static int ethnl_act_cable_test_tdr_cfg(const struct nlattr *nest, struct nlattr *tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_MAX + 1]; int ret; + cfg->first = 100; + cfg->step = 100; + cfg->last = MAX_CABLE_LENGTH_CM; + cfg->pair = PHY_PAIR_ALL; + + if (!nest) + return 0; + ret = nla_parse_nested(tb, ETHTOOL_A_CABLE_TEST_TDR_CFG_MAX, nest, cable_test_tdr_act_cfg_policy, info->extack); if (ret < 0) @@ -242,17 +250,12 @@ static int ethnl_act_cable_test_tdr_cfg(const struct nlattr *nest, if (tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_FIRST]) cfg->first = nla_get_u32( tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_FIRST]); - else - cfg->first = 100; + if (tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_LAST]) cfg->last = nla_get_u32(tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_LAST]); - else - cfg->last = MAX_CABLE_LENGTH_CM; if (tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_STEP]) cfg->step = nla_get_u32(tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_STEP]); - else - cfg->step = 100; if (tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR]) { cfg->pair = nla_get_u8(tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR]); @@ -263,8 +266,6 @@ static int ethnl_act_cable_test_tdr_cfg(const struct nlattr *nest, "invalid pair parameter"); return -EINVAL; } - } else { - cfg->pair = PHY_PAIR_ALL; } if (cfg->first > MAX_CABLE_LENGTH_CM) { From ef2e3ec520a8c20661ca4e7d17a5c7110d3a7828 Mon Sep 17 00:00:00 2001 From: Daniel Wagner Date: Thu, 4 Jun 2020 12:07:45 +0200 Subject: [PATCH 395/618] scsi: qla2xxx: Set NVMe status code for failed NVMe FCP request The qla2xxx driver knows when request was processed successfully or not. But it always sets the NVMe status code to 0/NVME_SC_SUCCESS. The upper layer needs to figure out from the rcv_rsplen and transferred_length variables if the request was transferred successfully. This is not always possible, e.g. when the request data length is 0, the transferred_length is also set 0 which is interpreted as success in nvme_fc_fcpio_done(). Let's inform the upper layer (nvme_fc_fcpio_done()) when something went wrong. nvme_fc_fcpio_done() maps all non-NVME_SC_SUCCESS status codes to NVME_SC_HOST_PATH_ERROR. There isn't any benefit to map the QLA status code to the NVMe status code. Therefore, use NVME_SC_INTERNAL to indicate an error which aligns it with the lpfc driver. Link: https://lore.kernel.org/r/20200604100745.89250-1-dwagner@suse.de Reviewed-by: Himanshu Madhani Reviewed-by: Hannes Reinecke Signed-off-by: Daniel Wagner Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_nvme.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c index d66d47a0f958..fa695a4007f8 100644 --- a/drivers/scsi/qla2xxx/qla_nvme.c +++ b/drivers/scsi/qla2xxx/qla_nvme.c @@ -139,11 +139,12 @@ static void qla_nvme_release_fcp_cmd_kref(struct kref *kref) sp->priv = NULL; if (priv->comp_status == QLA_SUCCESS) { fd->rcv_rsplen = le16_to_cpu(nvme->u.nvme.rsp_pyld_len); + fd->status = NVME_SC_SUCCESS; } else { fd->rcv_rsplen = 0; fd->transferred_length = 0; + fd->status = NVME_SC_INTERNAL; } - fd->status = 0; spin_unlock_irqrestore(&priv->cmd_lock, flags); fd->done(fd); From 41b14fb8724d5a4b382a63cb4a1a61880347ccb8 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Mon, 22 Jun 2020 23:26:04 +0300 Subject: [PATCH 396/618] net: Do not clear the sock TX queue in sk_set_socket() Clearing the sock TX queue in sk_set_socket() might cause unexpected out-of-order transmit when called from sock_orphan(), as outstanding packets can pick a different TX queue and bypass the ones already queued. This is undesired in general. More specifically, it breaks the in-order scheduling property guarantee for device-offloaded TLS sockets. Remove the call to sk_tx_queue_clear() in sk_set_socket(), and add it explicitly only where needed. Fixes: e022f0b4a03f ("net: Introduce sk_tx_queue_mapping") Signed-off-by: Tariq Toukan Reviewed-by: Boris Pismenny Signed-off-by: David S. Miller --- include/net/sock.h | 1 - net/core/sock.c | 2 ++ 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/include/net/sock.h b/include/net/sock.h index c53cc42b5ab9..3428619faae4 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1848,7 +1848,6 @@ static inline int sk_rx_queue_get(const struct sock *sk) static inline void sk_set_socket(struct sock *sk, struct socket *sock) { - sk_tx_queue_clear(sk); sk->sk_socket = sock; } diff --git a/net/core/sock.c b/net/core/sock.c index 94391da27754..d832c650287c 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1767,6 +1767,7 @@ struct sock *sk_alloc(struct net *net, int family, gfp_t priority, cgroup_sk_alloc(&sk->sk_cgrp_data); sock_update_classid(&sk->sk_cgrp_data); sock_update_netprioidx(&sk->sk_cgrp_data); + sk_tx_queue_clear(sk); } return sk; @@ -1990,6 +1991,7 @@ struct sock *sk_clone_lock(const struct sock *sk, const gfp_t priority) */ sk_refcnt_debug_inc(newsk); sk_set_socket(newsk, NULL); + sk_tx_queue_clear(newsk); RCU_INIT_POINTER(newsk->sk_wq, NULL); if (newsk->sk_prot->sockets_allocated) From 632f24f09d5b7c8a2f94932c3391ca957ae76cc4 Mon Sep 17 00:00:00 2001 From: Roman Bolshakov Date: Fri, 5 Jun 2020 17:44:37 +0300 Subject: [PATCH 397/618] scsi: qla2xxx: Keep initiator ports after RSCN The driver performs SCR (state change registration) in all modes including pure target mode. For each RSCN, scan_needed flag is set in qla2x00_handle_rscn() for the port mentioned in the RSCN and fabric rescan is scheduled. During the rescan, GNN_FT handler, qla24xx_async_gnnft_done() deletes session of the port that caused the RSCN. In target mode, the session deletion has an impact on ATIO handler, qlt_24xx_atio_pkt(). Target responds with SAM STATUS BUSY to I/O incoming from the deleted session. qlt_handle_cmd_for_atio() and qlt_handle_task_mgmt() return -EFAULT if they are not able to find session of the command/TMF, and that results in invocation of qlt_send_busy(): qlt_24xx_atio_pkt_all_vps: qla_target(0): type 6 ox_id 0014 qla_target(0): Unable to send command to target, sending BUSY status Such response causes command timeout on the initiator. Error handler thread on the initiator will be spawned to abort the commands: scsi 23:0:0:0: tag#0 abort scheduled scsi 23:0:0:0: tag#0 aborting command qla2xxx [0000:af:00.0]-188c:23: Entered qla24xx_abort_command. qla2xxx [0000:af:00.0]-801c:23: Abort command issued nexus=23:0:0 -- 0 2003. Command abort is rejected by target and fails (2003), error handler then tries to perform DEVICE RESET and TARGET RESET but they're also doomed to fail because TMFs are ignored for the deleted sessions. Then initiator makes BUS RESET that resets the link via qla2x00_full_login_lip(). BUS RESET succeeds and brings initiator port up, SAN switch detects that and sends RSCN to the target port and it fails again the same way as described above. It never goes out of the loop. The change breaks the RSCN loop by keeping initiator sessions mentioned in RSCN payload in all modes, including dual and pure target mode. Link: https://lore.kernel.org/r/20200605144435.27023-1-r.bolshakov@yadro.com Fixes: 2037ce49d30a ("scsi: qla2xxx: Fix stale session") Cc: Quinn Tran Cc: Arun Easi Cc: Nilesh Javali Cc: Bart Van Assche Cc: Daniel Wagner Cc: Himanshu Madhani Cc: Martin Wilck Cc: stable@vger.kernel.org # v5.4+ Reviewed-by: Daniel Wagner Reviewed-by: Shyam Sundar Reviewed-by: Himanshu Madhani Signed-off-by: Roman Bolshakov Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_gs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index 42c3ad27f1cb..df670fba2ab8 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -3496,7 +3496,9 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp) qla2x00_clear_loop_id(fcport); fcport->flags |= FCF_FABRIC_DEVICE; } else if (fcport->d_id.b24 != rp->id.b24 || - fcport->scan_needed) { + (fcport->scan_needed && + fcport->port_type != FCT_INITIATOR && + fcport->port_type != FCT_NVME_INITIATOR)) { qlt_schedule_sess_for_deletion(fcport); } fcport->d_id.b24 = rp->id.b24; From aad4b4d15f30de087c5972cfb767fadb5dbc3c52 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 20 Jun 2020 09:13:02 +0200 Subject: [PATCH 398/618] scsi: libata: Fix the ata_scsi_dma_need_drain stub We not only need the stub when libata is disabled, but also if it is modular and there are built-in SAS drivers (which can happen when SCSI_SAS_ATA is disabled). Link: https://lore.kernel.org/r/20200620071302.462974-2-hch@lst.de Fixes: b8f1d1e05817 ("scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers") Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- include/linux/libata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/libata.h b/include/linux/libata.h index 042e584daca7..c57bf6749681 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1092,7 +1092,7 @@ extern int ata_scsi_ioctl(struct scsi_device *dev, unsigned int cmd, #define ATA_SCSI_COMPAT_IOCTL /* empty */ #endif extern int ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd); -#if IS_ENABLED(CONFIG_ATA) +#if IS_REACHABLE(CONFIG_ATA) bool ata_scsi_dma_need_drain(struct request *rq); #else #define ata_scsi_dma_need_drain NULL From c718af2d00a37587b09e5958d142da7569f3d55b Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 23 Jun 2020 17:47:23 +0100 Subject: [PATCH 399/618] net: phylink: fix ethtool -A with attached PHYs Fix a phylink's ethtool set_pauseparam support deadlock caused by phylib interacting with phylink: we must not hold the state lock while calling phylib functions that may call into phylink_phy_change(). Fixes: f904f15ea9b5 ("net: phylink: allow ethtool -A to change flow control advertisement") Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/phylink.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 0ab65fb75258..453f9a399bb1 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -1502,18 +1502,20 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl, linkmode_set_pause(config->advertising, pause->tx_pause, pause->rx_pause); - /* If we have a PHY, phylib will call our link state function if the - * mode has changed, which will trigger a resolve and update the MAC - * configuration. + if (!pl->phydev && !test_bit(PHYLINK_DISABLE_STOPPED, + &pl->phylink_disable_state)) + phylink_pcs_config(pl, true, &pl->link_config); + + mutex_unlock(&pl->state_mutex); + + /* If we have a PHY, a change of the pause frame advertisement will + * cause phylib to renegotiate (if AN is enabled) which will in turn + * call our phylink_phy_change() and trigger a resolve. Note that + * we can't hold our state mutex while calling phy_set_asym_pause(). */ - if (pl->phydev) { + if (pl->phydev) phy_set_asym_pause(pl->phydev, pause->rx_pause, pause->tx_pause); - } else if (!test_bit(PHYLINK_DISABLE_STOPPED, - &pl->phylink_disable_state)) { - phylink_pcs_config(pl, true, &pl->link_config); - } - mutex_unlock(&pl->state_mutex); return 0; } From 2e919bc446faee429ac862a6cdb5e40017051f6b Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 23 Jun 2020 17:47:29 +0100 Subject: [PATCH 400/618] net: phylink: ensure manual pause mode configuration takes effect We have been relying on link events and mac_config() when the manual pause modes are changed. With recent developments, such as moving the programming of link state to mac_link_up(), this no longer works. To ensure that we update the MAC, we must generate a link-down followed by a link-up event; we can do that by setting mac_link_dropped and triggering a resolve. Fixes: 91a208f2185a ("net: phylink: propagate resolved link config via mac_link_up()") Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/phylink.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-) diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 453f9a399bb1..3b7c70e6c5dd 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -1463,6 +1463,8 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl, struct ethtool_pauseparam *pause) { struct phylink_link_state *config = &pl->link_config; + bool manual_changed; + int pause_state; ASSERT_RTNL(); @@ -1477,15 +1479,15 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl, !pause->autoneg && pause->rx_pause != pause->tx_pause) return -EINVAL; - mutex_lock(&pl->state_mutex); - config->pause = 0; + pause_state = 0; if (pause->autoneg) - config->pause |= MLO_PAUSE_AN; + pause_state |= MLO_PAUSE_AN; if (pause->rx_pause) - config->pause |= MLO_PAUSE_RX; + pause_state |= MLO_PAUSE_RX; if (pause->tx_pause) - config->pause |= MLO_PAUSE_TX; + pause_state |= MLO_PAUSE_TX; + mutex_lock(&pl->state_mutex); /* * See the comments for linkmode_set_pause(), wrt the deficiencies * with the current implementation. A solution to this issue would @@ -1502,6 +1504,12 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl, linkmode_set_pause(config->advertising, pause->tx_pause, pause->rx_pause); + manual_changed = (config->pause ^ pause_state) & MLO_PAUSE_AN || + (!(pause_state & MLO_PAUSE_AN) && + (config->pause ^ pause_state) & MLO_PAUSE_TXRX_MASK); + + config->pause = pause_state; + if (!pl->phydev && !test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) phylink_pcs_config(pl, true, &pl->link_config); @@ -1517,6 +1525,15 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl, phy_set_asym_pause(pl->phydev, pause->rx_pause, pause->tx_pause); + /* If the manual pause settings changed, make sure we trigger a + * resolve to update their state; we can not guarantee that the + * link will cycle. + */ + if (manual_changed) { + pl->mac_link_dropped = true; + phylink_run_resolve(pl); + } + return 0; } EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam); From 46da547e21d6cefceec3fb3dba5ebbca056627fc Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Tue, 23 Jun 2020 10:41:22 +0200 Subject: [PATCH 401/618] scsi: lpfc: Avoid another null dereference in lpfc_sli4_hba_unset() Commit cdb42becdd40 ("scsi: lpfc: Replace io_channels for nvme and fcp with general hdw_queues per cpu") has introduced static checker warnings for potential null dereferences in 'lpfc_sli4_hba_unset()' and commit 1ffdd2c0440d ("scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset") has tried to fix it. However, yet another potential null dereference is remaining. This commit fixes it. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. Link: https://lore.kernel.org/r/20200623084122.30633-1-sjpark@amazon.com Fixes: 1ffdd2c0440d ("scsi: lpfc: resolve static checker warning inlpfc_sli4_hba_unset") Fixes: cdb42becdd40 ("scsi: lpfc: Replace io_channels for nvme and fcp with general hdw_queues per cpu") Reviewed-by: James Smart Signed-off-by: SeongJae Park Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_init.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 69a5249e007a..6637f84a3d1b 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -11878,7 +11878,8 @@ lpfc_sli4_hba_unset(struct lpfc_hba *phba) lpfc_sli4_xri_exchange_busy_wait(phba); /* per-phba callback de-registration for hotplug event */ - lpfc_cpuhp_remove(phba); + if (phba->pport) + lpfc_cpuhp_remove(phba); /* Disable PCI subsystem interrupt */ lpfc_sli4_disable_intr(phba); From 936e6b85da0476dd2edac7c51c68072da9fb4ba2 Mon Sep 17 00:00:00 2001 From: Steffen Maier Date: Tue, 23 Jun 2020 16:02:42 +0200 Subject: [PATCH 402/618] scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action Suppose that, for unrelated reasons, FSF requests on behalf of recovery are very slow and can run into the ERP timeout. In the case at hand, we did adapter recovery to a large degree. However due to the slowness a LUN open is pending so the corresponding fc_rport remains blocked. After fast_io_fail_tmo we trigger close physical port recovery for the port under which the LUN should have been opened. The new higher order port recovery dismisses the pending LUN open ERP action and dismisses the pending LUN open FSF request. Such dismissal decouples the ERP action from the pending corresponding FSF request by setting zfcp_fsf_req->erp_action to NULL (among other things) [zfcp_erp_strategy_check_fsfreq()]. If now the ERP timeout for the pending open LUN request runs out, we must not use zfcp_fsf_req->erp_action in the ERP timeout handler. This is a problem since v4.15 commit 75492a51568b ("s390/scsi: Convert timers to use timer_setup()"). Before that we intentionally only passed zfcp_erp_action as context argument to zfcp_erp_timeout_handler(). Note: The lifetime of the corresponding zfcp_fsf_req object continues until a (late) response or an (unrelated) adapter recovery. Just like the regular response path ignores dismissed requests [zfcp_fsf_req_complete() => zfcp_fsf_protstatus_eval() => return early] the ERP timeout handler now needs to ignore dismissed requests. So simply return early in the ERP timeout handler if the FSF request is marked as dismissed in its status flags. To protect against the race where zfcp_erp_strategy_check_fsfreq() dismisses and sets zfcp_fsf_req->erp_action to NULL after our previous status flag check, return early if zfcp_fsf_req->erp_action is NULL. After all, the former ERP action does not need to be woken up as that was already done as part of the dismissal above [zfcp_erp_action_dismiss()]. This fixes the following panic due to kernel page fault in IRQ context: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000483 Fault in home space mode while using kernel ASCE. AS:000009859238c00b R2:00000e3e7ffd000b R3:00000e3e7ffcc007 S:00000e3e7ffd7000 P:000000000000013d Oops: 0004 ilc:2 [#1] SMP Modules linked in: ... CPU: 82 PID: 311273 Comm: stress Kdump: loaded Tainted: G E X ... Hardware name: IBM 8561 T01 701 (LPAR) Krnl PSW : 0404c00180000000 001fffff80549be0 (zfcp_erp_notify+0x40/0xc0 [zfcp]) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000080 00000e3d00000000 00000000000000f0 0000000000030000 000000010028e700 000000000400a39c 000000010028e700 00000e3e7cf87e02 0000000010000000 0700098591cb67f0 0000000000000000 0000000000000000 0000033840e9a000 0000000000000000 001fffe008d6bc18 001fffe008d6bbc8 Krnl Code: 001fffff80549bd4: a7180000 lhi %r1,0 001fffff80549bd8: 4120a0f0 la %r2,240(%r10) #001fffff80549bdc: a53e0003 llilh %r3,3 >001fffff80549be0: ba132000 cs %r1,%r3,0(%r2) 001fffff80549be4: a7740037 brc 7,1fffff80549c52 001fffff80549be8: e320b0180004 lg %r2,24(%r11) 001fffff80549bee: e31020e00004 lg %r1,224(%r2) 001fffff80549bf4: 412020e0 la %r2,224(%r2) Call Trace: [<001fffff80549be0>] zfcp_erp_notify+0x40/0xc0 [zfcp] [<00000985915e26f0>] call_timer_fn+0x38/0x190 [<00000985915e2944>] expire_timers+0xfc/0x190 [<00000985915e2ac4>] run_timer_softirq+0xec/0x218 [<0000098591ca7c4c>] __do_softirq+0x144/0x398 [<00000985915110aa>] do_softirq_own_stack+0x72/0x88 [<0000098591551b58>] irq_exit+0xb0/0xb8 [<0000098591510c6a>] do_IRQ+0x82/0xb0 [<0000098591ca7140>] ext_int_handler+0x128/0x12c [<0000098591722d98>] clear_subpage.constprop.13+0x38/0x60 ([<000009859172ae4c>] clear_huge_page+0xec/0x250) [<000009859177e7a2>] do_huge_pmd_anonymous_page+0x32a/0x768 [<000009859172a712>] __handle_mm_fault+0x88a/0x900 [<000009859172a860>] handle_mm_fault+0xd8/0x1b0 [<0000098591529ef6>] do_dat_exception+0x136/0x3e8 [<0000098591ca6d34>] pgm_check_handler+0x1c8/0x220 Last Breaking-Event-Address: [<001fffff80549c88>] zfcp_erp_timeout_handler+0x10/0x18 [zfcp] Kernel panic - not syncing: Fatal exception in interrupt Link: https://lore.kernel.org/r/20200623140242.98864-1-maier@linux.ibm.com Fixes: 75492a51568b ("s390/scsi: Convert timers to use timer_setup()") Cc: #4.15+ Reviewed-by: Julian Wiedmann Signed-off-by: Steffen Maier Signed-off-by: Martin K. Petersen --- drivers/s390/scsi/zfcp_erp.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index db320dab1fee..79f6e8fb03ca 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -577,7 +577,10 @@ static void zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *act) ZFCP_STATUS_ERP_TIMEDOUT)) { req->status |= ZFCP_STATUS_FSFREQ_DISMISSED; zfcp_dbf_rec_run("erscf_1", act); - req->erp_action = NULL; + /* lock-free concurrent access with + * zfcp_erp_timeout_handler() + */ + WRITE_ONCE(req->erp_action, NULL); } if (act->status & ZFCP_STATUS_ERP_TIMEDOUT) zfcp_dbf_rec_run("erscf_2", act); @@ -613,8 +616,14 @@ void zfcp_erp_notify(struct zfcp_erp_action *erp_action, unsigned long set_mask) void zfcp_erp_timeout_handler(struct timer_list *t) { struct zfcp_fsf_req *fsf_req = from_timer(fsf_req, t, timer); - struct zfcp_erp_action *act = fsf_req->erp_action; + struct zfcp_erp_action *act; + if (fsf_req->status & ZFCP_STATUS_FSFREQ_DISMISSED) + return; + /* lock-free concurrent access with zfcp_erp_strategy_check_fsfreq() */ + act = READ_ONCE(fsf_req->erp_action); + if (!act) + return; zfcp_erp_notify(act, ZFCP_STATUS_ERP_TIMEDOUT); } From afe89f115e84edbc76d316759e206580a06c6973 Mon Sep 17 00:00:00 2001 From: Tomas Henzl Date: Tue, 16 Jun 2020 17:04:46 +0200 Subject: [PATCH 403/618] scsi: mptscsih: Fix read sense data size The sense data buffer in sense_buf_pool is allocated with size of MPT_SENSE_BUFFER_ALLOC(64) (multiplied by req_depth) while SNS_LEN(sc)(96) is used when reading the data. That may lead to a read from unallocated area, sometimes from another (unallocated) page. To fix this, limit the read size to MPT_SENSE_BUFFER_ALLOC. Link: https://lore.kernel.org/r/20200616150446.4840-1-thenzl@redhat.com Co-developed-by: Stanislav Saner Signed-off-by: Stanislav Saner Signed-off-by: Tomas Henzl Signed-off-by: Martin K. Petersen --- drivers/message/fusion/mptscsih.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index f0737c57ed5f..1491561d2e5c 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -118,8 +118,6 @@ int mptscsih_suspend(struct pci_dev *pdev, pm_message_t state); int mptscsih_resume(struct pci_dev *pdev); #endif -#define SNS_LEN(scp) SCSI_SENSE_BUFFERSIZE - /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* @@ -2422,7 +2420,7 @@ mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR /* Copy the sense received into the scsi command block. */ req_index = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); sense_data = ((u8 *)ioc->sense_buf_pool + (req_index * MPT_SENSE_BUFFER_ALLOC)); - memcpy(sc->sense_buffer, sense_data, SNS_LEN(sc)); + memcpy(sc->sense_buffer, sense_data, MPT_SENSE_BUFFER_ALLOC); /* Log SMART data (asc = 0x5D, non-IM case only) if required. */ From 64536abc62c17ef6c7b0f17b820de9923b80e745 Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Wed, 27 May 2020 12:38:16 +0300 Subject: [PATCH 404/618] habanalabs: block scalar load_and_exe on external queue In Gaudi, the user can't execute scalar load_and_exe on external queue because it can be a security hole. The driver doesn't parse the commands being loaded and it can be msg_prot, which the user isn't allowed to use. Reviewed-by: Tomer Tayar Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/gaudi/gaudi.c | 25 ++++++++++++++++++- .../habanalabs/include/gaudi/gaudi_packets.h | 3 +++ 2 files changed, 27 insertions(+), 1 deletion(-) diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c index 61f88e9884ce..f34ac8d35a14 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi.c +++ b/drivers/misc/habanalabs/gaudi/gaudi.c @@ -3790,6 +3790,25 @@ static int gaudi_validate_dma_pkt_no_mmu(struct hl_device *hdev, src_in_host); } +static int gaudi_validate_load_and_exe_pkt(struct hl_device *hdev, + struct hl_cs_parser *parser, + struct packet_load_and_exe *user_pkt) +{ + u32 cfg; + + cfg = le32_to_cpu(user_pkt->cfg); + + if (cfg & GAUDI_PKT_LOAD_AND_EXE_CFG_DST_MASK) { + dev_err(hdev->dev, + "User not allowed to use Load and Execute\n"); + return -EPERM; + } + + parser->patched_cb_size += sizeof(struct packet_load_and_exe); + + return 0; +} + static int gaudi_validate_cb(struct hl_device *hdev, struct hl_cs_parser *parser, bool is_mmu) { @@ -3838,6 +3857,11 @@ static int gaudi_validate_cb(struct hl_device *hdev, rc = -EPERM; break; + case PACKET_LOAD_AND_EXE: + rc = gaudi_validate_load_and_exe_pkt(hdev, parser, + (struct packet_load_and_exe *) user_pkt); + break; + case PACKET_LIN_DMA: parser->contains_dma_pkt = true; if (is_mmu) @@ -3855,7 +3879,6 @@ static int gaudi_validate_cb(struct hl_device *hdev, case PACKET_FENCE: case PACKET_NOP: case PACKET_ARB_POINT: - case PACKET_LOAD_AND_EXE: parser->patched_cb_size += pkt_size; break; diff --git a/drivers/misc/habanalabs/include/gaudi/gaudi_packets.h b/drivers/misc/habanalabs/include/gaudi/gaudi_packets.h index 9a5800b0086b..0f0cd067bb43 100644 --- a/drivers/misc/habanalabs/include/gaudi/gaudi_packets.h +++ b/drivers/misc/habanalabs/include/gaudi/gaudi_packets.h @@ -197,6 +197,9 @@ struct packet_wait { __le32 ctl; }; +#define GAUDI_PKT_LOAD_AND_EXE_CFG_DST_SHIFT 0 +#define GAUDI_PKT_LOAD_AND_EXE_CFG_DST_MASK 0x00000001 + struct packet_load_and_exe { __le32 cfg; __le32 ctl; From cfd4176dc0bbbd3d01d6764cd85e1f1705b35548 Mon Sep 17 00:00:00 2001 From: Omer Shpigelman Date: Wed, 3 Jun 2020 13:03:35 +0300 Subject: [PATCH 405/618] habanalabs: use PI in MMU cache invalidation The PS flow for MMU cache invalidation caused timeouts in stress tests. Use PS + PI flow so no timeouts should happen whatsoever. Signed-off-by: Omer Shpigelman Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/gaudi/gaudi.c | 8 ++++++++ drivers/misc/habanalabs/gaudi/gaudiP.h | 3 +++ 2 files changed, 11 insertions(+) diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c index f34ac8d35a14..211547d4f8a7 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi.c +++ b/drivers/misc/habanalabs/gaudi/gaudi.c @@ -2725,6 +2725,12 @@ static int gaudi_mmu_init(struct hl_device *hdev) WREG32(mmSTLB_HOP_CONFIGURATION, hdev->mmu_huge_page_opt ? 0x30440 : 0x40440); + /* + * The H/W expects the first PI after init to be 1. After wraparound + * we'll write 0. + */ + gaudi->mmu_cache_inv_pi = 1; + gaudi->hw_cap_initialized |= HW_CAP_MMU; return 0; @@ -6017,6 +6023,8 @@ static int gaudi_mmu_invalidate_cache(struct hl_device *hdev, bool is_hard, mutex_lock(&hdev->mmu_cache_lock); /* L0 & L1 invalidation */ + WREG32(mmSTLB_INV_PS, 3); + WREG32(mmSTLB_CACHE_INV, gaudi->mmu_cache_inv_pi++); WREG32(mmSTLB_INV_PS, 2); rc = hl_poll_timeout( diff --git a/drivers/misc/habanalabs/gaudi/gaudiP.h b/drivers/misc/habanalabs/gaudi/gaudiP.h index a46530d375fa..41a8d9bff6bf 100644 --- a/drivers/misc/habanalabs/gaudi/gaudiP.h +++ b/drivers/misc/habanalabs/gaudi/gaudiP.h @@ -229,6 +229,8 @@ struct gaudi_internal_qman_info { * @multi_msi_mode: whether we are working in multi MSI single MSI mode. * Multi MSI is possible only with IOMMU enabled. * @ext_queue_idx: helper index for external queues initialization. + * @mmu_cache_inv_pi: PI for MMU cache invalidation flow. The H/W expects an + * 8-bit value so use u8. */ struct gaudi_device { int (*armcp_info_get)(struct hl_device *hdev); @@ -248,6 +250,7 @@ struct gaudi_device { u32 hw_cap_initialized; u8 multi_msi_mode; u8 ext_queue_idx; + u8 mmu_cache_inv_pi; }; void gaudi_init_security(struct hl_device *hdev); From dd2fde10934fd0f21e144cf7fbb76564d1d57c77 Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Sun, 7 Jun 2020 08:21:48 +0300 Subject: [PATCH 406/618] habanalabs: rename mmu_write() to mmu_asid_va_write() The function name conflicts with a static inline function in arch/m68k/include/asm/mcfmmu.h Reported-by: kernel test robot Reviewed-by: Tomer Tayar Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/misc/habanalabs/debugfs.c b/drivers/misc/habanalabs/debugfs.c index 3c8dcdfba20c..fc4372c18ce2 100644 --- a/drivers/misc/habanalabs/debugfs.c +++ b/drivers/misc/habanalabs/debugfs.c @@ -480,7 +480,7 @@ static int mmu_show(struct seq_file *s, void *data) return 0; } -static ssize_t mmu_write(struct file *file, const char __user *buf, +static ssize_t mmu_asid_va_write(struct file *file, const char __user *buf, size_t count, loff_t *f_pos) { struct seq_file *s = file->private_data; @@ -1125,7 +1125,7 @@ static const struct hl_info_list hl_debugfs_list[] = { {"command_submission_jobs", command_submission_jobs_show, NULL}, {"userptr", userptr_show, NULL}, {"vm", vm_show, NULL}, - {"mmu", mmu_show, mmu_write}, + {"mmu", mmu_show, mmu_asid_va_write}, {"engines", engines_show, NULL} }; From 647e835e67421ee47b0ff8acc2808de86f7d5e01 Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Sun, 7 Jun 2020 11:26:48 +0300 Subject: [PATCH 407/618] habanalabs: increase GAUDI QMAN ARB WDT timeout The current timeout is too low for some of the workloads and we see false errors as a result. Reviewed-by: Tomer Tayar Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/gaudi/gaudi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c index 211547d4f8a7..69317d2ebdfa 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi.c +++ b/drivers/misc/habanalabs/gaudi/gaudi.c @@ -96,7 +96,7 @@ #define GAUDI_NUM_OF_QM_ARB_ERR_CAUSE 3 -#define GAUDI_ARB_WDT_TIMEOUT 0x400000 +#define GAUDI_ARB_WDT_TIMEOUT 0x1000000 static const char gaudi_irq_name[GAUDI_MSI_ENTRIES][GAUDI_MAX_STRING_LEN] = { "gaudi cq 0_0", "gaudi cq 0_1", "gaudi cq 0_2", "gaudi cq 0_3", From 3292055c85aa02723b7b7a1114c4c91deefad5e4 Mon Sep 17 00:00:00 2001 From: Ofir Bitton Date: Thu, 11 Jun 2020 11:43:23 +0300 Subject: [PATCH 408/618] habanalabs: Correct handling when failing to enqueue CB The fence release flow is different if the CS was never submitted. In that case, we don't have an hw_sob object attached that we need to "put". While if the CS was aborted, we do need to "put" the hw_sob. Signed-off-by: Ofir Bitton Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/command_submission.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/misc/habanalabs/command_submission.c b/drivers/misc/habanalabs/command_submission.c index f82974a916c3..b0f62cbbdc87 100644 --- a/drivers/misc/habanalabs/command_submission.c +++ b/drivers/misc/habanalabs/command_submission.c @@ -62,6 +62,12 @@ static void hl_fence_release(struct dma_fence *fence) container_of(fence, struct hl_cs_compl, base_fence); struct hl_device *hdev = hl_cs_cmpl->hdev; + /* EBUSY means the CS was never submitted and hence we don't have + * an attached hw_sob object that we should handle here + */ + if (fence->error == -EBUSY) + goto free; + if ((hl_cs_cmpl->type == CS_TYPE_SIGNAL) || (hl_cs_cmpl->type == CS_TYPE_WAIT)) { @@ -92,6 +98,7 @@ static void hl_fence_release(struct dma_fence *fence) kref_put(&hl_cs_cmpl->hw_sob->kref, hl_sob_reset); } +free: kfree_rcu(hl_cs_cmpl, base_fence.rcu); } @@ -328,10 +335,16 @@ static void cs_do_release(struct kref *ref) hl_ctx_put(cs->ctx); + /* We need to mark an error for not submitted because in that case + * the dma fence release flow is different. Mainly, we don't need + * to handle hw_sob for signal/wait + */ if (cs->timedout) dma_fence_set_error(cs->fence, -ETIMEDOUT); else if (cs->aborted) dma_fence_set_error(cs->fence, -EIO); + else if (!cs->submitted) + dma_fence_set_error(cs->fence, -EBUSY); dma_fence_signal(cs->fence); dma_fence_put(cs->fence); From a721321446432c3899aeca16cc6ddc30422b7f74 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 24 Jun 2020 14:06:54 +0800 Subject: [PATCH 409/618] soc: imx8m: fix build warning Fix the build warning with x86_64-randconfig >> drivers/soc/imx/soc-imx8m.c:150:34: warning: unused variable >> 'imx8_soc_match' [-Wunused-const-variable] static const struct of_device_id imx8_soc_match[] = { ^ Fixes: fc40200ebf82 ("soc: imx: increase build coverage for imx8m soc driver") Reported-by: kernel test robot Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- drivers/soc/imx/soc-imx8m.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soc/imx/soc-imx8m.c b/drivers/soc/imx/soc-imx8m.c index 0bc831499bd8..cc57a384d74d 100644 --- a/drivers/soc/imx/soc-imx8m.c +++ b/drivers/soc/imx/soc-imx8m.c @@ -150,7 +150,7 @@ static const struct imx8_soc_data imx8mp_soc_data = { .soc_revision = imx8mm_soc_revision, }; -static const struct of_device_id imx8_soc_match[] = { +static __maybe_unused const struct of_device_id imx8_soc_match[] = { { .compatible = "fsl,imx8mq", .data = &imx8mq_soc_data, }, { .compatible = "fsl,imx8mm", .data = &imx8mm_soc_data, }, { .compatible = "fsl,imx8mn", .data = &imx8mn_soc_data, }, From b51e1cf64f93acebb6d8afbacd648a6ecefc39b4 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 23 Jun 2020 11:09:16 +0800 Subject: [PATCH 410/618] usb: cdns3: ep0: fix the test mode set incorrectly The 'tmode' is ctrl->wIndex, changing it as the real test mode value for register assignment. Cc: Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reviewed-by: Jun Li Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/cdns3/ep0.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c index 82645a2a0f52..04e49582fb55 100644 --- a/drivers/usb/cdns3/ep0.c +++ b/drivers/usb/cdns3/ep0.c @@ -327,7 +327,8 @@ static int cdns3_ep0_feature_handle_device(struct cdns3_device *priv_dev, if (!set || (tmode & 0xff) != 0) return -EINVAL; - switch (tmode >> 8) { + tmode >>= 8; + switch (tmode) { case TEST_J: case TEST_K: case TEST_SE0_NAK: From ba3a80fe0fb67d8790f62b7bc60df97406d89871 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 23 Jun 2020 11:09:17 +0800 Subject: [PATCH 411/618] usb: cdns3: trace: using correct dir value It should use the correct direction value from register, not depends on previous software setting. It fixed the EP number wrong issue at trace when the TRBERR interrupt occurs for EP0IN. When the EP0IN IOC has finished, software prepares the setup packet request, the expected direction is OUT, but at that time, the TRBERR for EP0IN may occur since it is DMULT mode, the DMA does not stop until TRBERR has met. Cc: Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reviewed-by: Pawel Laszczak Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/cdns3/trace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/cdns3/trace.h b/drivers/usb/cdns3/trace.h index 8d121e207fd8..755c56582257 100644 --- a/drivers/usb/cdns3/trace.h +++ b/drivers/usb/cdns3/trace.h @@ -156,7 +156,7 @@ DECLARE_EVENT_CLASS(cdns3_log_ep0_irq, __dynamic_array(char, str, CDNS3_MSG_MAX) ), TP_fast_assign( - __entry->ep_dir = priv_dev->ep0_data_dir; + __entry->ep_dir = priv_dev->selected_ep; __entry->ep_sts = ep_sts; ), TP_printk("%s", cdns3_decode_ep0_irq(__get_str(str), From 2587a029fa2a877d0a8dda955ef1b24c94b4bd0e Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 23 Jun 2020 11:09:18 +0800 Subject: [PATCH 412/618] usb: cdns3: ep0: add spinlock for cdns3_check_new_setup The other thread may access other endpoints when the cdns3_check_new_setup is handling, add spinlock to protect it. Cc: Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reviewed-by: Pawel Laszczak Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/cdns3/ep0.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c index 04e49582fb55..61ec5bb2b0ca 100644 --- a/drivers/usb/cdns3/ep0.c +++ b/drivers/usb/cdns3/ep0.c @@ -705,15 +705,17 @@ static int cdns3_gadget_ep0_queue(struct usb_ep *ep, int ret = 0; u8 zlp = 0; + spin_lock_irqsave(&priv_dev->lock, flags); trace_cdns3_ep0_queue(priv_dev, request); /* cancel the request if controller receive new SETUP packet. */ - if (cdns3_check_new_setup(priv_dev)) + if (cdns3_check_new_setup(priv_dev)) { + spin_unlock_irqrestore(&priv_dev->lock, flags); return -ECONNRESET; + } /* send STATUS stage. Should be called only for SET_CONFIGURATION */ if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE) { - spin_lock_irqsave(&priv_dev->lock, flags); cdns3_select_ep(priv_dev, 0x00); erdy_sent = !priv_dev->hw_configured_flag; @@ -738,7 +740,6 @@ static int cdns3_gadget_ep0_queue(struct usb_ep *ep, return 0; } - spin_lock_irqsave(&priv_dev->lock, flags); if (!list_empty(&priv_ep->pending_req_list)) { dev_err(priv_dev->dev, "can't handle multiple requests for ep0\n"); From 2655971ad4b34e97dd921df16bb0b08db9449df7 Mon Sep 17 00:00:00 2001 From: Aditya Pakki Date: Sat, 13 Jun 2020 22:15:25 -0500 Subject: [PATCH 413/618] usb: dwc3: pci: Fix reference count leak in dwc3_pci_resume_work dwc3_pci_resume_work() calls pm_runtime_get_sync() that increments the reference counter. In case of failure, decrement the reference before returning. Signed-off-by: Aditya Pakki Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index b67372737dc9..96c05b121fac 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -206,8 +206,10 @@ static void dwc3_pci_resume_work(struct work_struct *work) int ret; ret = pm_runtime_get_sync(&dwc3->dev); - if (ret) + if (ret) { + pm_runtime_put_sync_autosuspend(&dwc3->dev); return; + } pm_runtime_mark_last_busy(&dwc3->dev); pm_runtime_put_sync_autosuspend(&dwc3->dev); From d410912ef63714fad404f34baa72e5ceb0466e62 Mon Sep 17 00:00:00 2001 From: Tang Bin Date: Thu, 28 May 2020 19:47:17 +0800 Subject: [PATCH 414/618] usb: phy: tegra: Fix unnecessary check in tegra_usb_phy_probe() In the function tegra_usb_phy_probe(), if usb_add_phy_dev() failed, the return value will be given to err, and if usb_add_phy_dev() succeed, the return value will be zero. Thus it is unnecessary to repeated check here. Signed-off-by: Zhang Shengju Signed-off-by: Tang Bin Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-tegra-usb.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c index cffe2aced488..03a333797382 100644 --- a/drivers/usb/phy/phy-tegra-usb.c +++ b/drivers/usb/phy/phy-tegra-usb.c @@ -1199,11 +1199,7 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) platform_set_drvdata(pdev, tegra_phy); - err = usb_add_phy_dev(&tegra_phy->u_phy); - if (err) - return err; - - return 0; + return usb_add_phy_dev(&tegra_phy->u_phy); } static int tegra_usb_phy_remove(struct platform_device *pdev) From e55f3c37cb8d31c7e301f46396b2ac6a19eb3a7c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 15 Jun 2020 14:27:19 +0300 Subject: [PATCH 415/618] usb: gadget: udc: Potential Oops in error handling code If this is in "transceiver" mode the the ->qwork isn't required and is a NULL pointer. This can lead to a NULL dereference when we call destroy_workqueue(udc->qwork). Fixes: 3517c31a8ece ("usb: gadget: mv_udc: use devm_xxx for probe") Signed-off-by: Dan Carpenter Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/mv_udc_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c index cafde053788b..80a1b52c656e 100644 --- a/drivers/usb/gadget/udc/mv_udc_core.c +++ b/drivers/usb/gadget/udc/mv_udc_core.c @@ -2313,7 +2313,8 @@ static int mv_udc_probe(struct platform_device *pdev) return 0; err_create_workqueue: - destroy_workqueue(udc->qwork); + if (udc->qwork) + destroy_workqueue(udc->qwork); err_destroy_dma: dma_pool_destroy(udc->dtd_pool); err_free_dma: From cd37c6976f6a5b681a900e74ff9d15062855bf87 Mon Sep 17 00:00:00 2001 From: Anand Moon Date: Tue, 23 Jun 2020 07:46:37 +0000 Subject: [PATCH 416/618] Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk" This reverts commit 07f6842341abe978e6375078f84506ec3280ece5. Since SCLK_SCLK_USBD300 suspend clock need to be configured for phy module, I wrongly mapped this clock to DWC3 code. Cc: Felipe Balbi Cc: Greg Kroah-Hartman Signed-off-by: Anand Moon Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-exynos.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index 48b68b6f0dc8..90bb022737da 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -162,12 +162,6 @@ static const struct dwc3_exynos_driverdata exynos5250_drvdata = { .suspend_clk_idx = -1, }; -static const struct dwc3_exynos_driverdata exynos5420_drvdata = { - .clk_names = { "usbdrd30", "usbdrd30_susp_clk"}, - .num_clks = 2, - .suspend_clk_idx = 1, -}; - static const struct dwc3_exynos_driverdata exynos5433_drvdata = { .clk_names = { "aclk", "susp_clk", "pipe_pclk", "phyclk" }, .num_clks = 4, @@ -184,9 +178,6 @@ static const struct of_device_id exynos_dwc3_match[] = { { .compatible = "samsung,exynos5250-dwusb3", .data = &exynos5250_drvdata, - }, { - .compatible = "samsung,exynos5420-dwusb3", - .data = &exynos5420_drvdata, }, { .compatible = "samsung,exynos5433-dwusb3", .data = &exynos5433_drvdata, From ce04326edd59d7902d7ef3a9d853864096e0cd1a Mon Sep 17 00:00:00 2001 From: Omer Shpigelman Date: Tue, 16 Jun 2020 17:56:27 +0300 Subject: [PATCH 417/618] habanalabs: increase h/w timer when checking idle In GAUDI the current timer value for the hardware to check if it is in IDLE state is too low. As a result, there are occasions where the H/W wrongly reports it is not IDLE. The driver checks that before submitting work on behalf of the driver during initialization, so a false report might cause the driver to fail during device initialization. Signed-off-by: Omer Shpigelman Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/gaudi/gaudi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c index 69317d2ebdfa..834470d10b46 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi.c +++ b/drivers/misc/habanalabs/gaudi/gaudi.c @@ -1893,6 +1893,8 @@ static void gaudi_init_pci_dma_qman(struct hl_device *hdev, int dma_id, WREG32(mmDMA0_QM_CP_MSG_BASE3_ADDR_LO_0 + q_off, so_base_ws_lo); WREG32(mmDMA0_QM_CP_MSG_BASE3_ADDR_HI_0 + q_off, so_base_ws_hi); + WREG32(mmDMA0_QM_CP_BARRIER_CFG_0 + q_off, 0x100); + /* The following configuration is needed only once per QMAN */ if (qman_id == 0) { /* Configure RAZWI IRQ */ From 49a3b0e1c05ab3601100a723f7ea207dc99a492a Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 24 Jun 2020 13:23:10 +0100 Subject: [PATCH 418/618] arm64: vdso: Only pass --no-eh-frame-hdr when linker supports it Commit 87676cfca141 ("arm64: vdso: Disable dwarf unwinding through the sigreturn trampoline") unconditionally passes the '--no-eh-frame-hdr' option to the linker when building the native vDSO in an attempt to prevent generation of the .eh_frame_hdr section, the presence of which has been implicated in segfaults originating from the libgcc unwinder. Unfortunately, not all versions of binutils support this option, which has been shown to cause build failures in linux-next: | CALL scripts/atomic/check-atomics.sh | CALL scripts/checksyscalls.sh | LD arch/arm64/kernel/vdso/vdso.so.dbg | ld: unrecognized option '--no-eh-frame-hdr' | ld: use the --help option for usage information | arch/arm64/kernel/vdso/Makefile:64: recipe for target | 'arch/arm64/kernel/vdso/vdso.so.dbg' failed | make[1]: *** [arch/arm64/kernel/vdso/vdso.so.dbg] Error 1 | arch/arm64/Makefile:175: recipe for target 'vdso_prepare' failed | make: *** [vdso_prepare] Error 2 Only link the vDSO with '--no-eh-frame-hdr' when the linker supports it. If we end up with the section due to linker defaults, the absence of CFI information in the sigreturn trampoline will prevent the unwinder from breaking. Link: https://lore.kernel.org/r/7a7e31a8-9a7b-2428-ad83-2264f20bdc2d@hisilicon.com Fixes: 87676cfca141 ("arm64: vdso: Disable dwarf unwinding through the sigreturn trampoline") Reported-by: Shaokun Zhang Tested-by: Jon Hunter Signed-off-by: Will Deacon --- arch/arm64/kernel/vdso/Makefile | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile index 1e5a940532da..97d3d3632093 100644 --- a/arch/arm64/kernel/vdso/Makefile +++ b/arch/arm64/kernel/vdso/Makefile @@ -23,8 +23,9 @@ btildflags-$(CONFIG_ARM64_BTI_KERNEL) += -z force-bti # potential future proofing if we end up with internal calls to the exported # routines, as x86 does (see 6f121e548f83 ("x86, vdso: Reimplement vdso.so # preparation in build-time C")). -ldflags-y := -shared -nostdlib -soname=linux-vdso.so.1 --hash-style=sysv \ - -Bsymbolic --no-eh-frame-hdr --build-id -n $(btildflags-y) -T +ldflags-y := -shared -nostdlib -soname=linux-vdso.so.1 --hash-style=sysv \ + -Bsymbolic $(call ld-option, --no-eh-frame-hdr) --build-id -n \ + $(btildflags-y) -T ccflags-y := -fno-common -fno-builtin -fno-stack-protector -ffixed-x18 ccflags-y += -DDISABLE_BRANCH_PROFILING From 220345e98f1cdc768eeb6e3364a0fa7ab9647fe7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 24 Jun 2020 14:23:40 +0200 Subject: [PATCH 419/618] ALSA: usb-audio: Fix OOB access of mixer element list The USB-audio mixer code holds a linked list of usb_mixer_elem_list, and several operations are performed for each mixer element. A few of them (snd_usb_mixer_notify_id() and snd_usb_mixer_interrupt_v2()) assume each mixer element being a usb_mixer_elem_info object that is a subclass of usb_mixer_elem_list, cast via container_of() and access it members. This may result in an out-of-bound access when a non-standard list element has been added, as spotted by syzkaller recently. This patch adds a new field, is_std_info, in usb_mixer_elem_list to indicate that the element is the usb_mixer_elem_info type or not, and skip the access to such an element if needed. Reported-by: syzbot+fb14314433463ad51625@syzkaller.appspotmail.com Reported-by: syzbot+2405ca3401e943c538b5@syzkaller.appspotmail.com Cc: Link: https://lore.kernel.org/r/20200624122340.9615-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/usb/mixer.c | 15 +++++++++++---- sound/usb/mixer.h | 9 +++++++-- sound/usb/mixer_quirks.c | 3 ++- 3 files changed, 20 insertions(+), 7 deletions(-) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 15769f266790..eab0fd4fd7c3 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -581,8 +581,9 @@ static int check_matrix_bitmap(unsigned char *bmap, * if failed, give up and free the control instance. */ -int snd_usb_mixer_add_control(struct usb_mixer_elem_list *list, - struct snd_kcontrol *kctl) +int snd_usb_mixer_add_list(struct usb_mixer_elem_list *list, + struct snd_kcontrol *kctl, + bool is_std_info) { struct usb_mixer_interface *mixer = list->mixer; int err; @@ -596,6 +597,7 @@ int snd_usb_mixer_add_control(struct usb_mixer_elem_list *list, return err; } list->kctl = kctl; + list->is_std_info = is_std_info; list->next_id_elem = mixer->id_elems[list->id]; mixer->id_elems[list->id] = list; return 0; @@ -3234,8 +3236,11 @@ void snd_usb_mixer_notify_id(struct usb_mixer_interface *mixer, int unitid) unitid = delegate_notify(mixer, unitid, NULL, NULL); for_each_mixer_elem(list, mixer, unitid) { - struct usb_mixer_elem_info *info = - mixer_elem_list_to_info(list); + struct usb_mixer_elem_info *info; + + if (!list->is_std_info) + continue; + info = mixer_elem_list_to_info(list); /* invalidate cache, so the value is read from the device */ info->cached = 0; snd_ctl_notify(mixer->chip->card, SNDRV_CTL_EVENT_MASK_VALUE, @@ -3315,6 +3320,8 @@ static void snd_usb_mixer_interrupt_v2(struct usb_mixer_interface *mixer, if (!list->kctl) continue; + if (!list->is_std_info) + continue; info = mixer_elem_list_to_info(list); if (count > 1 && info->control != control) diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h index 41ec9dc4139b..c29e27ac43a7 100644 --- a/sound/usb/mixer.h +++ b/sound/usb/mixer.h @@ -66,6 +66,7 @@ struct usb_mixer_elem_list { struct usb_mixer_elem_list *next_id_elem; /* list of controls with same id */ struct snd_kcontrol *kctl; unsigned int id; + bool is_std_info; usb_mixer_elem_dump_func_t dump; usb_mixer_elem_resume_func_t resume; }; @@ -103,8 +104,12 @@ void snd_usb_mixer_notify_id(struct usb_mixer_interface *mixer, int unitid); int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval, int request, int validx, int value_set); -int snd_usb_mixer_add_control(struct usb_mixer_elem_list *list, - struct snd_kcontrol *kctl); +int snd_usb_mixer_add_list(struct usb_mixer_elem_list *list, + struct snd_kcontrol *kctl, + bool is_std_info); + +#define snd_usb_mixer_add_control(list, kctl) \ + snd_usb_mixer_add_list(list, kctl, true) void snd_usb_mixer_elem_init_std(struct usb_mixer_elem_list *list, struct usb_mixer_interface *mixer, diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index b6bcf2f92383..cec1cfd7edb7 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -158,7 +158,8 @@ static int add_single_ctl_with_resume(struct usb_mixer_interface *mixer, return -ENOMEM; } kctl->private_free = snd_usb_mixer_elem_free; - return snd_usb_mixer_add_control(list, kctl); + /* don't use snd_usb_mixer_add_control() here, this is a special list element */ + return snd_usb_mixer_add_list(list, kctl, false); } /* From e56404e8e475c91489b2cca57f2c1b2bc5edf6b2 Mon Sep 17 00:00:00 2001 From: Alexander Popov Date: Wed, 24 Jun 2020 15:33:28 +0300 Subject: [PATCH 420/618] arm64: vdso: Don't use gcc plugins for building vgettimeofday.c Don't use gcc plugins for building arch/arm64/kernel/vdso/vgettimeofday.c to avoid unneeded instrumentation. Signed-off-by: Alexander Popov Link: https://lore.kernel.org/r/20200624123330.83226-4-alex.popov@linux.com Signed-off-by: Will Deacon --- arch/arm64/kernel/vdso/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile index 97d3d3632093..45d5cfe46429 100644 --- a/arch/arm64/kernel/vdso/Makefile +++ b/arch/arm64/kernel/vdso/Makefile @@ -30,7 +30,7 @@ ldflags-y := -shared -nostdlib -soname=linux-vdso.so.1 --hash-style=sysv \ ccflags-y := -fno-common -fno-builtin -fno-stack-protector -ffixed-x18 ccflags-y += -DDISABLE_BRANCH_PROFILING -CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS) +CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS) $(GCC_PLUGINS_CFLAGS) KBUILD_CFLAGS += $(DISABLE_LTO) KASAN_SANITIZE := n UBSAN_SANITIZE := n From 2d21889f8b5c50f65f5162bc972b0b1626b97be2 Mon Sep 17 00:00:00 2001 From: Jean-Philippe Brucker Date: Wed, 24 Jun 2020 13:22:54 +0200 Subject: [PATCH 421/618] arm64: Don't insert a BTI instruction at inner labels Some ftrace features are broken since commit 714a8d02ca4d ("arm64: asm: Override SYM_FUNC_START when building the kernel with BTI"). For example the function_graph tracer: $ echo function_graph > /sys/kernel/debug/tracing/current_tracer [ 36.107016] WARNING: CPU: 0 PID: 115 at kernel/trace/ftrace.c:2691 ftrace_modify_all_code+0xc8/0x14c When ftrace_modify_graph_caller() attempts to write a branch at ftrace_graph_call, it finds the "BTI J" instruction inserted by SYM_INNER_LABEL() instead of a NOP, and aborts. It turns out we don't currently need the BTI landing pads inserted by SYM_INNER_LABEL: * ftrace_call and ftrace_graph_call are only used for runtime patching of the active tracer. The patched code is not reached from a branch. * install_el2_stub is reached from a CBZ instruction, which doesn't change PSTATE.BTYPE. * __guest_exit is reached from B instructions in the hyp-entry vectors, which aren't subject to BTI checks either. Remove the BTI annotation from SYM_INNER_LABEL. Fixes: 714a8d02ca4d ("arm64: asm: Override SYM_FUNC_START when building the kernel with BTI") Signed-off-by: Jean-Philippe Brucker Reviewed-by: Mark Brown Link: https://lore.kernel.org/r/20200624112253.1602786-1-jean-philippe@linaro.org Signed-off-by: Will Deacon --- arch/arm64/include/asm/linkage.h | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/arm64/include/asm/linkage.h b/arch/arm64/include/asm/linkage.h index 81fefd2a1d02..ba89a9af820a 100644 --- a/arch/arm64/include/asm/linkage.h +++ b/arch/arm64/include/asm/linkage.h @@ -12,7 +12,6 @@ * instead. */ #define BTI_C hint 34 ; -#define BTI_J hint 36 ; /* * When using in-kernel BTI we need to ensure that PCS-conformant assembly @@ -43,11 +42,6 @@ SYM_START(name, SYM_L_WEAK, SYM_A_NONE) \ BTI_C -#define SYM_INNER_LABEL(name, linkage) \ - .type name SYM_T_NONE ASM_NL \ - SYM_ENTRY(name, linkage, SYM_A_NONE) \ - BTI_J - #endif /* From f4617be35b4b547e82d30993f56d631dfc2d5f88 Mon Sep 17 00:00:00 2001 From: Sai Prakash Ranjan Date: Wed, 24 Jun 2020 18:04:06 +0530 Subject: [PATCH 422/618] arm64: kpti: Add KRYO{3, 4}XX silver CPU cores to kpti safelist QCOM KRYO{3,4}XX silver/LITTLE CPU cores are based on Cortex-A55 and are meltdown safe, hence add them to kpti_safe_list[]. Signed-off-by: Sai Prakash Ranjan Link: https://lore.kernel.org/r/20200624123406.3472-1-saiprakash.ranjan@codeaurora.org Signed-off-by: Will Deacon --- arch/arm64/kernel/cpufeature.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 4ae41670c2e6..9f63053a63a9 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -1290,6 +1290,8 @@ static bool unmap_kernel_at_el0(const struct arm64_cpu_capabilities *entry, MIDR_ALL_VERSIONS(MIDR_CORTEX_A73), MIDR_ALL_VERSIONS(MIDR_HISI_TSV110), MIDR_ALL_VERSIONS(MIDR_NVIDIA_CARMEL), + MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_3XX_SILVER), + MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_4XX_SILVER), { /* sentinel */ } }; char const *str = "kpti command line option"; From cb944f02d0d8c5a5f38119242325fe26504d33d2 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 24 Jun 2020 11:49:33 +0100 Subject: [PATCH 423/618] kselftest: arm64: Remove redundant clean target The arm64 signal tests generate warnings during build since both they and the toplevel lib.mk define a clean target: Makefile:25: warning: overriding recipe for target 'clean' ../../lib.mk:126: warning: ignoring old recipe for target 'clean' Since the inclusion of lib.mk is in the signal Makefile there is no situation where this warning could be avoided so just remove the redundant clean target. Signed-off-by: Mark Brown Link: https://lore.kernel.org/r/20200624104933.21125-1-broonie@kernel.org Signed-off-by: Will Deacon --- tools/testing/selftests/arm64/signal/Makefile | 4 ---- 1 file changed, 4 deletions(-) diff --git a/tools/testing/selftests/arm64/signal/Makefile b/tools/testing/selftests/arm64/signal/Makefile index b497cfea4643..ac4ad0005715 100644 --- a/tools/testing/selftests/arm64/signal/Makefile +++ b/tools/testing/selftests/arm64/signal/Makefile @@ -21,10 +21,6 @@ include ../../lib.mk $(TEST_GEN_PROGS): $(PROGS) cp $(PROGS) $(OUTPUT)/ -clean: - $(CLEAN) - rm -f $(PROGS) - # Common test-unit targets to build common-layout test-cases executables # Needs secondary expansion to properly include the testcase c-file in pre-reqs .SECONDEXPANSION: From c0e2a0341cd8ccd213ffc6c7f9cd52a31466cba9 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 23 Jun 2020 11:09:16 +0800 Subject: [PATCH 424/618] usb: cdns3: ep0: fix the test mode set incorrectly The 'tmode' is ctrl->wIndex, changing it as the real test mode value for register assignment. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: Reviewed-by: Jun Li Reviewed-by: Pawel Laszczak Signed-off-by: Peter Chen Link: https://lore.kernel.org/r/20200623030918.8409-2-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/cdns3/ep0.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c index 82645a2a0f52..04e49582fb55 100644 --- a/drivers/usb/cdns3/ep0.c +++ b/drivers/usb/cdns3/ep0.c @@ -327,7 +327,8 @@ static int cdns3_ep0_feature_handle_device(struct cdns3_device *priv_dev, if (!set || (tmode & 0xff) != 0) return -EINVAL; - switch (tmode >> 8) { + tmode >>= 8; + switch (tmode) { case TEST_J: case TEST_K: case TEST_SE0_NAK: From 813072b67ee97659807049d014c9d4e36fd62e94 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 23 Jun 2020 11:09:17 +0800 Subject: [PATCH 425/618] usb: cdns3: trace: using correct dir value It should use the correct direction value from register, not depends on previous software setting. It fixed the EP number wrong issue at trace when the TRBERR interrupt occurs for EP0IN. When the EP0IN IOC has finished, software prepares the setup packet request, the expected direction is OUT, but at that time, the TRBERR for EP0IN may occur since it is DMULT mode, the DMA does not stop until TRBERR has met. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: Reviewed-by: Pawel Laszczak Signed-off-by: Peter Chen Link: https://lore.kernel.org/r/20200623030918.8409-3-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/cdns3/trace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/cdns3/trace.h b/drivers/usb/cdns3/trace.h index 8d121e207fd8..755c56582257 100644 --- a/drivers/usb/cdns3/trace.h +++ b/drivers/usb/cdns3/trace.h @@ -156,7 +156,7 @@ DECLARE_EVENT_CLASS(cdns3_log_ep0_irq, __dynamic_array(char, str, CDNS3_MSG_MAX) ), TP_fast_assign( - __entry->ep_dir = priv_dev->ep0_data_dir; + __entry->ep_dir = priv_dev->selected_ep; __entry->ep_sts = ep_sts; ), TP_printk("%s", cdns3_decode_ep0_irq(__get_str(str), From d0b78265cac9d8b5f7d5c97fa44860d6ab952dc8 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 23 Jun 2020 11:09:18 +0800 Subject: [PATCH 426/618] usb: cdns3: ep0: add spinlock for cdns3_check_new_setup The other thread may access other endpoints when the cdns3_check_new_setup is handling, add spinlock to protect it. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: Reviewed-by: Pawel Laszczak Signed-off-by: Peter Chen Link: https://lore.kernel.org/r/20200623030918.8409-4-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/cdns3/ep0.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c index 04e49582fb55..61ec5bb2b0ca 100644 --- a/drivers/usb/cdns3/ep0.c +++ b/drivers/usb/cdns3/ep0.c @@ -705,15 +705,17 @@ static int cdns3_gadget_ep0_queue(struct usb_ep *ep, int ret = 0; u8 zlp = 0; + spin_lock_irqsave(&priv_dev->lock, flags); trace_cdns3_ep0_queue(priv_dev, request); /* cancel the request if controller receive new SETUP packet. */ - if (cdns3_check_new_setup(priv_dev)) + if (cdns3_check_new_setup(priv_dev)) { + spin_unlock_irqrestore(&priv_dev->lock, flags); return -ECONNRESET; + } /* send STATUS stage. Should be called only for SET_CONFIGURATION */ if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE) { - spin_lock_irqsave(&priv_dev->lock, flags); cdns3_select_ep(priv_dev, 0x00); erdy_sent = !priv_dev->hw_configured_flag; @@ -738,7 +740,6 @@ static int cdns3_gadget_ep0_queue(struct usb_ep *ep, return 0; } - spin_lock_irqsave(&priv_dev->lock, flags); if (!list_empty(&priv_ep->pending_req_list)) { dev_err(priv_dev->dev, "can't handle multiple requests for ep0\n"); From dceea67058fe22075db3aed62d5cb62092be5053 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Wed, 24 Jun 2020 16:59:45 +0300 Subject: [PATCH 427/618] xhci: Fix incorrect EP_STATE_MASK EP_STATE_MASK should be 0x7 instead of 0xf xhci spec 6.2.3 shows that the EP state field in the endpoint context data structure consist of bits [2:0]. The old value included a bit from the next field which fortunately is a RsvdZ region. So hopefully this hasn't caused too much harm Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 2c6c4f8d1ee1..c295e8a7f5ae 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -716,7 +716,7 @@ struct xhci_ep_ctx { * 4 - TRB error * 5-7 - reserved */ -#define EP_STATE_MASK (0xf) +#define EP_STATE_MASK (0x7) #define EP_STATE_DISABLED 0 #define EP_STATE_RUNNING 1 #define EP_STATE_HALTED 2 From a73d9d9cfc3cfceabd91fb0b0c13e4062b6dbcd7 Mon Sep 17 00:00:00 2001 From: Al Cooper Date: Wed, 24 Jun 2020 16:59:46 +0300 Subject: [PATCH 428/618] xhci: Fix enumeration issue when setting max packet size for FS devices. Unable to complete the enumeration of a USB TV Tuner device. Per XHCI spec (4.6.5), the EP state field of the input context shall be cleared for a set address command. In the special case of an FS device that has "MaxPacketSize0 = 8", the Linux XHCI driver does not do this before evaluating the context. With an XHCI controller that checks the EP state field for parameter context error this causes a problem in cases such as the device getting reset again after enumeration. When that field is cleared, the problem does not occur. This was found and fixed by Sasi Kumar. Cc: stable@vger.kernel.org Signed-off-by: Al Cooper Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index bee5deccc83d..03b64b73eb99 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1430,6 +1430,7 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id, xhci->devs[slot_id]->out_ctx, ep_index); ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index); + ep_ctx->ep_info &= cpu_to_le32(~EP_STATE_MASK);/* must clear */ ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK); ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size)); From a24d5072e87457a14023ee1dd3fc8b1e76f899ef Mon Sep 17 00:00:00 2001 From: Macpaul Lin Date: Wed, 24 Jun 2020 16:59:47 +0300 Subject: [PATCH 429/618] usb: host: xhci-mtk: avoid runtime suspend when removing hcd When runtime suspend was enabled, runtime suspend might happen when xhci is removing hcd. This might cause kernel panic when hcd has been freed but runtime pm suspend related handle need to reference it. Signed-off-by: Macpaul Lin Reviewed-by: Chunfeng Yun Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mtk.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index bfbdb3ceed29..4311d4c9b68d 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -587,6 +587,9 @@ static int xhci_mtk_remove(struct platform_device *dev) struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct usb_hcd *shared_hcd = xhci->shared_hcd; + pm_runtime_put_noidle(&dev->dev); + pm_runtime_disable(&dev->dev); + usb_remove_hcd(shared_hcd); xhci->shared_hcd = NULL; device_init_wakeup(&dev->dev, false); @@ -597,8 +600,6 @@ static int xhci_mtk_remove(struct platform_device *dev) xhci_mtk_sch_exit(mtk); xhci_mtk_clks_disable(mtk); xhci_mtk_ldos_disable(mtk); - pm_runtime_put_sync(&dev->dev); - pm_runtime_disable(&dev->dev); return 0; } From f0c472a6da51f9fac15e80fe2fd9c83b68754cff Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Wed, 24 Jun 2020 16:59:48 +0300 Subject: [PATCH 430/618] xhci: Return if xHCI doesn't support LPM Just return if xHCI is quirked to disable LPM. We can save some time from reading registers and doing spinlocks. Add stable tag as we want this patch together with the next one, "Poll for U0 after disabling USB2 LPM" which fixes a suspend issue for some USB2 LPM devices Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 03b64b73eb99..f97106e2860f 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4391,6 +4391,9 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, int hird, exit_latency; int ret; + if (xhci->quirks & XHCI_HW_LPM_DISABLE) + return -EPERM; + if (hcd->speed >= HCD_USB3 || !xhci->hw_lpm_support || !udev->lpm_capable) return -EPERM; @@ -4413,7 +4416,7 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", enable ? "enable" : "disable", port_num + 1); - if (enable && !(xhci->quirks & XHCI_HW_LPM_DISABLE)) { + if (enable) { /* Host supports BESL timeout instead of HIRD */ if (udev->usb2_hw_lpm_besl_capable) { /* if device doesn't have a preferred BESL value use a From b3d71abd135e6919ca0b6cab463738472653ddfb Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Wed, 24 Jun 2020 16:59:49 +0300 Subject: [PATCH 431/618] xhci: Poll for U0 after disabling USB2 LPM USB2 devices with LPM enabled may interrupt the system suspend: [ 932.510475] usb 1-7: usb suspend, wakeup 0 [ 932.510549] hub 1-0:1.0: hub_suspend [ 932.510581] usb usb1: bus suspend, wakeup 0 [ 932.510590] xhci_hcd 0000:00:14.0: port 9 not suspended [ 932.510593] xhci_hcd 0000:00:14.0: port 8 not suspended .. [ 932.520323] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x400e03 .. [ 932.591405] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16 [ 932.591414] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -16 [ 932.591418] PM: Device 0000:00:14.0 failed to suspend async: error -16 During system suspend, USB core will let HC suspends the device if it doesn't have remote wakeup enabled and doesn't have any children. However, from the log above we can see that the usb 1-7 doesn't get bus suspended due to not in U0. After a while the port finished U2 -> U0 transition, interrupts the suspend process. The observation is that after disabling LPM, port doesn't transit to U0 immediately and can linger in U2. xHCI spec 4.23.5.2 states that the maximum exit latency for USB2 LPM should be BESL + 10us. The BESL for the affected device is advertised as 400us, which is still not enough based on my testing result. So let's use the maximum permitted latency, 10000, to poll for U0 status to solve the issue. Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index f97106e2860f..ed468eed299c 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4475,6 +4475,9 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, mutex_lock(hcd->bandwidth_mutex); xhci_change_max_exit_latency(xhci, udev, 0); mutex_unlock(hcd->bandwidth_mutex); + readl_poll_timeout(ports[port_num]->addr, pm_val, + (pm_val & PORT_PLS_MASK) == XDEV_U0, + 100, 10000); return 0; } } From ad38beb373a14e082f4e64b68c0b6e6b09764680 Mon Sep 17 00:00:00 2001 From: Anand Moon Date: Tue, 23 Jun 2020 07:46:37 +0000 Subject: [PATCH 432/618] Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk" This reverts commit 07f6842341abe978e6375078f84506ec3280ece5. Since SCLK_SCLK_USBD300 suspend clock need to be configured for phy module, I wrongly mapped this clock to DWC3 code. Cc: Felipe Balbi Cc: Greg Kroah-Hartman Signed-off-by: Anand Moon Cc: stable Fixes: 07f6842341ab ("usb: dwc3: exynos: Add support for Exynos5422 suspend clk") Link: https://lore.kernel.org/r/20200623074637.756-1-linux.amoon@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-exynos.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index 48b68b6f0dc8..90bb022737da 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -162,12 +162,6 @@ static const struct dwc3_exynos_driverdata exynos5250_drvdata = { .suspend_clk_idx = -1, }; -static const struct dwc3_exynos_driverdata exynos5420_drvdata = { - .clk_names = { "usbdrd30", "usbdrd30_susp_clk"}, - .num_clks = 2, - .suspend_clk_idx = 1, -}; - static const struct dwc3_exynos_driverdata exynos5433_drvdata = { .clk_names = { "aclk", "susp_clk", "pipe_pclk", "phyclk" }, .num_clks = 4, @@ -184,9 +178,6 @@ static const struct of_device_id exynos_dwc3_match[] = { { .compatible = "samsung,exynos5250-dwusb3", .data = &exynos5250_drvdata, - }, { - .compatible = "samsung,exynos5420-dwusb3", - .data = &exynos5420_drvdata, }, { .compatible = "samsung,exynos5433-dwusb3", .data = &exynos5433_drvdata, From 35f760b44b1b9cb16a306bdcc7220fbbf78c4789 Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Mon, 22 Jun 2020 23:31:22 +0300 Subject: [PATCH 433/618] drm/radeon: fix fb_div check in ni_init_smc_spll_table() clk_s is checked twice in a row in ni_init_smc_spll_table(). fb_div should be checked instead. Fixes: 69e0b57a91ad ("drm/radeon/kms: add dpm support for cayman (v5)") Cc: stable@vger.kernel.org Signed-off-by: Denis Efremov Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/ni_dpm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/ni_dpm.c b/drivers/gpu/drm/radeon/ni_dpm.c index b57c37ddd164..c7fbb7932f37 100644 --- a/drivers/gpu/drm/radeon/ni_dpm.c +++ b/drivers/gpu/drm/radeon/ni_dpm.c @@ -2127,7 +2127,7 @@ static int ni_init_smc_spll_table(struct radeon_device *rdev) if (clk_s & ~(SMC_NISLANDS_SPLL_DIV_TABLE_CLKS_MASK >> SMC_NISLANDS_SPLL_DIV_TABLE_CLKS_SHIFT)) ret = -EINVAL; - if (clk_s & ~(SMC_NISLANDS_SPLL_DIV_TABLE_CLKS_MASK >> SMC_NISLANDS_SPLL_DIV_TABLE_CLKS_SHIFT)) + if (fb_div & ~(SMC_NISLANDS_SPLL_DIV_TABLE_FBDIV_MASK >> SMC_NISLANDS_SPLL_DIV_TABLE_FBDIV_SHIFT)) ret = -EINVAL; if (clk_v & ~(SMC_NISLANDS_SPLL_DIV_TABLE_CLKV_MASK >> SMC_NISLANDS_SPLL_DIV_TABLE_CLKV_SHIFT)) From 0b8eb629a700c0ef15a437758db8255f8444e76c Mon Sep 17 00:00:00 2001 From: Chengguang Xu Date: Wed, 24 Jun 2020 18:21:39 +0800 Subject: [PATCH 434/618] block: release bip in a right way in error path Release bip using kfree() in error path when that was allocated by kmalloc(). Signed-off-by: Chengguang Xu Reviewed-by: Christoph Hellwig Acked-by: Martin K. Petersen Signed-off-by: Jens Axboe --- block/bio-integrity.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/block/bio-integrity.c b/block/bio-integrity.c index 23632a33ed39..4707e90b8ee5 100644 --- a/block/bio-integrity.c +++ b/block/bio-integrity.c @@ -24,6 +24,18 @@ void blk_flush_integrity(void) flush_workqueue(kintegrityd_wq); } +void __bio_integrity_free(struct bio_set *bs, struct bio_integrity_payload *bip) +{ + if (bs && mempool_initialized(&bs->bio_integrity_pool)) { + if (bip->bip_vec) + bvec_free(&bs->bvec_integrity_pool, bip->bip_vec, + bip->bip_slab); + mempool_free(bip, &bs->bio_integrity_pool); + } else { + kfree(bip); + } +} + /** * bio_integrity_alloc - Allocate integrity payload and attach it to bio * @bio: bio to attach integrity metadata to @@ -78,7 +90,7 @@ struct bio_integrity_payload *bio_integrity_alloc(struct bio *bio, return bip; err: - mempool_free(bip, &bs->bio_integrity_pool); + __bio_integrity_free(bs, bip); return ERR_PTR(-ENOMEM); } EXPORT_SYMBOL(bio_integrity_alloc); @@ -99,14 +111,7 @@ void bio_integrity_free(struct bio *bio) kfree(page_address(bip->bip_vec->bv_page) + bip->bip_vec->bv_offset); - if (bs && mempool_initialized(&bs->bio_integrity_pool)) { - bvec_free(&bs->bvec_integrity_pool, bip->bip_vec, bip->bip_slab); - - mempool_free(bip, &bs->bio_integrity_pool); - } else { - kfree(bip); - } - + __bio_integrity_free(bs, bip); bio->bi_integrity = NULL; bio->bi_opf &= ~REQ_INTEGRITY; } From ea0efd687b01355cd799c8643d0c636ba4859ffc Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Thu, 18 Jun 2020 21:11:17 +0900 Subject: [PATCH 435/618] usb: renesas_usbhs: getting residue from callback_result This driver assumed that dmaengine_tx_status() could return the residue even if the transfer was completed. However, this was not correct usage [1] and this caused to break getting the residue after the commit 24461d9792c2 ("dmaengine: virt-dma: Fix access after free in vchan_complete()") actually. So, this is possible to get wrong received size if the usb controller gets a short packet. For example, g_zero driver causes "bad OUT byte" errors. The usb-dmac driver will support the callback_result, so this driver can use it to get residue correctly. Note that even if the usb-dmac driver has not supported the callback_result yet, this patch doesn't cause any side-effects. [1] https://lore.kernel.org/dmaengine/20200616165550.GP2324254@vkoul-mobl/ Reported-by: Hien Dang Fixes: 24461d9792c2 ("dmaengine: virt-dma: Fix access after free in vchan_complete()") Signed-off-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/1592482277-19563-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/renesas_usbhs/fifo.c | 23 +++++++++++++---------- drivers/usb/renesas_usbhs/fifo.h | 2 +- 2 files changed, 14 insertions(+), 11 deletions(-) diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index 01c6a48c41bc..ac9a81ae8216 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -803,7 +803,8 @@ static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map) return info->dma_map_ctrl(chan->device->dev, pkt, map); } -static void usbhsf_dma_complete(void *arg); +static void usbhsf_dma_complete(void *arg, + const struct dmaengine_result *result); static void usbhsf_dma_xfer_preparing(struct usbhs_pkt *pkt) { struct usbhs_pipe *pipe = pkt->pipe; @@ -813,6 +814,7 @@ static void usbhsf_dma_xfer_preparing(struct usbhs_pkt *pkt) struct dma_chan *chan; struct device *dev = usbhs_priv_to_dev(priv); enum dma_transfer_direction dir; + dma_cookie_t cookie; fifo = usbhs_pipe_to_fifo(pipe); if (!fifo) @@ -827,11 +829,11 @@ static void usbhsf_dma_xfer_preparing(struct usbhs_pkt *pkt) if (!desc) return; - desc->callback = usbhsf_dma_complete; - desc->callback_param = pipe; + desc->callback_result = usbhsf_dma_complete; + desc->callback_param = pkt; - pkt->cookie = dmaengine_submit(desc); - if (pkt->cookie < 0) { + cookie = dmaengine_submit(desc); + if (cookie < 0) { dev_err(dev, "Failed to submit dma descriptor\n"); return; } @@ -1152,12 +1154,10 @@ static size_t usbhs_dma_calc_received_size(struct usbhs_pkt *pkt, struct dma_chan *chan, int dtln) { struct usbhs_pipe *pipe = pkt->pipe; - struct dma_tx_state state; size_t received_size; int maxp = usbhs_pipe_get_maxpacket(pipe); - dmaengine_tx_status(chan, pkt->cookie, &state); - received_size = pkt->length - state.residue; + received_size = pkt->length - pkt->dma_result->residue; if (dtln) { received_size -= USBHS_USB_DMAC_XFER_SIZE; @@ -1363,13 +1363,16 @@ static int usbhsf_irq_ready(struct usbhs_priv *priv, return 0; } -static void usbhsf_dma_complete(void *arg) +static void usbhsf_dma_complete(void *arg, + const struct dmaengine_result *result) { - struct usbhs_pipe *pipe = arg; + struct usbhs_pkt *pkt = arg; + struct usbhs_pipe *pipe = pkt->pipe; struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); struct device *dev = usbhs_priv_to_dev(priv); int ret; + pkt->dma_result = result; ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_DMA_DONE); if (ret < 0) dev_err(dev, "dma_complete run_error %d : %d\n", diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h index 7d3700bf41d9..039a2b993157 100644 --- a/drivers/usb/renesas_usbhs/fifo.h +++ b/drivers/usb/renesas_usbhs/fifo.h @@ -50,7 +50,7 @@ struct usbhs_pkt { struct usbhs_pkt *pkt); struct work_struct work; dma_addr_t dma; - dma_cookie_t cookie; + const struct dmaengine_result *dma_result; void *buf; int length; int trans; From 4fea243ebce40e2e4193d7d25eabfd963c46ef8c Mon Sep 17 00:00:00 2001 From: Max Gurtovoy Date: Tue, 16 Jun 2020 12:34:21 +0300 Subject: [PATCH 436/618] nvme: set initial value for controller's numa node Initialize the node to NUMA_NO_NODE value. Transports that are aware of numa node affinity can override it (e.g. RDMA transport set the affinity according to the RDMA HCA). Signed-off-by: Max Gurtovoy Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index c2c5bc4fb702..915fa2e609eb 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -4174,6 +4174,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctrl, struct device *dev, ctrl->dev = dev; ctrl->ops = ops; ctrl->quirks = quirks; + ctrl->numa_node = NUMA_NO_NODE; INIT_WORK(&ctrl->scan_work, nvme_scan_work); INIT_WORK(&ctrl->async_event_work, nvme_async_event_work); INIT_WORK(&ctrl->fw_act_work, nvme_fw_act_work); From 635333e400e2e678258ea45232415cdadadd7818 Mon Sep 17 00:00:00 2001 From: Max Gurtovoy Date: Tue, 16 Jun 2020 12:34:22 +0300 Subject: [PATCH 437/618] nvme-pci: override the value of the controller's numa node Set the node value according to the PCI device numa node. Signed-off-by: Max Gurtovoy Signed-off-by: Christoph Hellwig --- drivers/nvme/host/pci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index e2bacd369a88..46dc530d461c 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1669,6 +1669,8 @@ static int nvme_pci_configure_admin_queue(struct nvme_dev *dev) if (result) return result; + dev->ctrl.numa_node = dev_to_node(dev->dev); + nvmeq = &dev->queues[0]; aqa = nvmeq->q_depth - 1; aqa |= aqa << 16; From d4ec47f120537c75184c3dc939d3b2e1bcc8b260 Mon Sep 17 00:00:00 2001 From: Max Gurtovoy Date: Tue, 16 Jun 2020 12:34:23 +0300 Subject: [PATCH 438/618] nvme-pci: initialize tagset numa value to the value of the ctrl Both admin's and drive's tagsets should be set according the numa node of the controller. Signed-off-by: Max Gurtovoy Signed-off-by: Christoph Hellwig --- drivers/nvme/host/pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 46dc530d461c..b1d18f0633c7 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1593,7 +1593,7 @@ static int nvme_alloc_admin_tags(struct nvme_dev *dev) dev->admin_tagset.queue_depth = NVME_AQ_MQ_TAG_DEPTH; dev->admin_tagset.timeout = ADMIN_TIMEOUT; - dev->admin_tagset.numa_node = dev_to_node(dev->dev); + dev->admin_tagset.numa_node = dev->ctrl.numa_node; dev->admin_tagset.cmd_size = sizeof(struct nvme_iod); dev->admin_tagset.flags = BLK_MQ_F_NO_SCHED; dev->admin_tagset.driver_data = dev; @@ -2259,7 +2259,7 @@ static void nvme_dev_add(struct nvme_dev *dev) if (dev->io_queues[HCTX_TYPE_POLL]) dev->tagset.nr_maps++; dev->tagset.timeout = NVME_IO_TIMEOUT; - dev->tagset.numa_node = dev_to_node(dev->dev); + dev->tagset.numa_node = dev->ctrl.numa_node; dev->tagset.queue_depth = min_t(int, dev->q_depth, BLK_MQ_MAX_DEPTH) - 1; dev->tagset.cmd_size = sizeof(struct nvme_iod); From 610c823510f7d05a4ddb7bba00893e455bbef9dc Mon Sep 17 00:00:00 2001 From: Max Gurtovoy Date: Tue, 16 Jun 2020 12:34:24 +0300 Subject: [PATCH 439/618] nvme-tcp: initialize tagset numa value to the value of the ctrl Both admin's and drive's tagsets should be set according the numa node of the controller. Signed-off-by: Max Gurtovoy Signed-off-by: Christoph Hellwig --- drivers/nvme/host/tcp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index 3345ec7efaff..79ef2b8e2b3c 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -1532,7 +1532,7 @@ static struct blk_mq_tag_set *nvme_tcp_alloc_tagset(struct nvme_ctrl *nctrl, set->ops = &nvme_tcp_admin_mq_ops; set->queue_depth = NVME_AQ_MQ_TAG_DEPTH; set->reserved_tags = 2; /* connect + keep-alive */ - set->numa_node = NUMA_NO_NODE; + set->numa_node = nctrl->numa_node; set->flags = BLK_MQ_F_BLOCKING; set->cmd_size = sizeof(struct nvme_tcp_request); set->driver_data = ctrl; @@ -1544,7 +1544,7 @@ static struct blk_mq_tag_set *nvme_tcp_alloc_tagset(struct nvme_ctrl *nctrl, set->ops = &nvme_tcp_mq_ops; set->queue_depth = nctrl->sqsize + 1; set->reserved_tags = 1; /* fabric connect */ - set->numa_node = NUMA_NO_NODE; + set->numa_node = nctrl->numa_node; set->flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_BLOCKING; set->cmd_size = sizeof(struct nvme_tcp_request); set->driver_data = ctrl; From 1b4ad7a50ab06573aa8841217d6a472dc1db2d85 Mon Sep 17 00:00:00 2001 From: Max Gurtovoy Date: Tue, 16 Jun 2020 12:34:25 +0300 Subject: [PATCH 440/618] nvme-loop: initialize tagset numa value to the value of the ctrl Both admin's and drive's tagsets should be set according the numa node of the controller. Signed-off-by: Max Gurtovoy Signed-off-by: Christoph Hellwig --- drivers/nvme/target/loop.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c index 0d54e730cbf2..6344e73c9354 100644 --- a/drivers/nvme/target/loop.c +++ b/drivers/nvme/target/loop.c @@ -340,7 +340,7 @@ static int nvme_loop_configure_admin_queue(struct nvme_loop_ctrl *ctrl) ctrl->admin_tag_set.ops = &nvme_loop_admin_mq_ops; ctrl->admin_tag_set.queue_depth = NVME_AQ_MQ_TAG_DEPTH; ctrl->admin_tag_set.reserved_tags = 2; /* connect + keep-alive */ - ctrl->admin_tag_set.numa_node = NUMA_NO_NODE; + ctrl->admin_tag_set.numa_node = ctrl->ctrl.numa_node; ctrl->admin_tag_set.cmd_size = sizeof(struct nvme_loop_iod) + NVME_INLINE_SG_CNT * sizeof(struct scatterlist); ctrl->admin_tag_set.driver_data = ctrl; @@ -512,7 +512,7 @@ static int nvme_loop_create_io_queues(struct nvme_loop_ctrl *ctrl) ctrl->tag_set.ops = &nvme_loop_mq_ops; ctrl->tag_set.queue_depth = ctrl->ctrl.opts->queue_size; ctrl->tag_set.reserved_tags = 1; /* fabric connect */ - ctrl->tag_set.numa_node = NUMA_NO_NODE; + ctrl->tag_set.numa_node = ctrl->ctrl.numa_node; ctrl->tag_set.flags = BLK_MQ_F_SHOULD_MERGE; ctrl->tag_set.cmd_size = sizeof(struct nvme_loop_iod) + NVME_INLINE_SG_CNT * sizeof(struct scatterlist); From 032a9966a22a3596addf81dacf0c1736dfedc32a Mon Sep 17 00:00:00 2001 From: Max Gurtovoy Date: Tue, 23 Jun 2020 17:55:25 +0300 Subject: [PATCH 441/618] nvme-rdma: assign completion vector correctly The completion vector index that is given during CQ creation can't exceed the number of support vectors by the underlying RDMA device. This violation currently can accure, for example, in case one will try to connect with N regular read/write queues and M poll queues and the sum of N + M > num_supported_vectors. This will lead to failure in establish a connection to remote target. Instead, in that case, share a completion vector between queues. Signed-off-by: Max Gurtovoy Signed-off-by: Christoph Hellwig --- drivers/nvme/host/rdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index f8f856dc0c67..13506a87a444 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -470,7 +470,7 @@ static int nvme_rdma_create_queue_ib(struct nvme_rdma_queue *queue) * Spread I/O queues completion vectors according their queue index. * Admin queues can always go on completion vector 0. */ - comp_vector = idx == 0 ? idx : idx - 1; + comp_vector = (idx == 0 ? idx : idx - 1) % ibdev->num_comp_vectors; /* Polling queues need direct cq polling context */ if (nvme_rdma_poll_queue(queue)) From 3b4b19721ec652ad2c4fe51dfbe5124212b5f581 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Wed, 24 Jun 2020 01:53:08 -0700 Subject: [PATCH 442/618] nvme: fix possible deadlock when I/O is blocked Revert fab7772bfbcf ("nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns") When adding a new namespace to the head disk (via nvme_mpath_set_live) we will see partition scan which triggers I/O on the mpath device node. This process will usually be triggered from the scan_work which holds the scan_lock. If I/O blocks (if we got ana change currently have only available paths but none are accessible) this can deadlock on the head disk bd_mutex as both partition scan I/O takes it, and head disk revalidation takes it to check for resize (also triggered from scan_work on a different path). See trace [1]. The mpath disk revalidation was originally added to detect online disk size change, but this is no longer needed since commit cb224c3af4df ("nvme: Convert to use set_capacity_revalidate_and_notify") which already updates resize info without unnecessarily revalidating the disk (the mpath disk doesn't even implement .revalidate_disk fop). [1]: -- kernel: INFO: task kworker/u65:9:494 blocked for more than 241 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u65:9 D 0 494 2 0x80004000 kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: schedule_preempt_disabled+0xe/0x10 kernel: __mutex_lock.isra.0+0x182/0x4f0 kernel: __mutex_lock_slowpath+0x13/0x20 kernel: mutex_lock+0x2e/0x40 kernel: revalidate_disk+0x63/0xa0 kernel: __nvme_revalidate_disk+0xfe/0x110 [nvme_core] kernel: nvme_revalidate_disk+0xa4/0x160 [nvme_core] kernel: ? evict+0x14c/0x1b0 kernel: revalidate_disk+0x2b/0xa0 kernel: nvme_validate_ns+0x49/0x940 [nvme_core] kernel: ? blk_mq_free_request+0xd2/0x100 kernel: ? __nvme_submit_sync_cmd+0xbe/0x1e0 [nvme_core] kernel: nvme_scan_work+0x24f/0x380 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x249/0x400 kernel: kthread+0x104/0x140 kernel: ? process_one_work+0x380/0x380 kernel: ? kthread_park+0x80/0x80 kernel: ret_from_fork+0x1f/0x40 ... kernel: INFO: task kworker/u65:1:2630 blocked for more than 241 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u65:1 D 0 2630 2 0x80004000 kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: io_schedule+0x16/0x40 kernel: do_read_cache_page+0x438/0x830 kernel: ? __switch_to_asm+0x34/0x70 kernel: ? file_fdatawait_range+0x30/0x30 kernel: read_cache_page+0x12/0x20 kernel: read_dev_sector+0x27/0xc0 kernel: read_lba+0xc1/0x220 kernel: ? kmem_cache_alloc_trace+0x19c/0x230 kernel: efi_partition+0x1e6/0x708 kernel: ? vsnprintf+0x39e/0x4e0 kernel: ? snprintf+0x49/0x60 kernel: check_partition+0x154/0x244 kernel: rescan_partitions+0xae/0x280 kernel: __blkdev_get+0x40f/0x560 kernel: blkdev_get+0x3d/0x140 kernel: __device_add_disk+0x388/0x480 kernel: device_add_disk+0x13/0x20 kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core] kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core] kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core] kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core] kernel: ? nvme_update_ns_ana_state+0x60/0x60 [nvme_core] kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core] kernel: nvme_validate_ns+0x396/0x940 [nvme_core] kernel: ? blk_mq_free_request+0xd2/0x100 kernel: nvme_scan_work+0x24f/0x380 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x249/0x400 kernel: kthread+0x104/0x140 kernel: ? process_one_work+0x380/0x380 kernel: ? kthread_park+0x80/0x80 kernel: ret_from_fork+0x1f/0x40 -- Fixes: fab7772bfbcf ("nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns") Signed-off-by: Anton Eidelman Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 915fa2e609eb..28f4388c1337 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1974,7 +1974,6 @@ static int __nvme_revalidate_disk(struct gendisk *disk, struct nvme_id_ns *id) if (ns->head->disk) { nvme_update_disk_info(ns->head->disk, ns, id); blk_queue_stack_limits(ns->head->disk->queue, ns->queue); - revalidate_disk(ns->head->disk); } #endif return 0; From 489dd102a2c7c94d783a35f9412eb085b8da1aa4 Mon Sep 17 00:00:00 2001 From: Anton Eidelman Date: Wed, 24 Jun 2020 01:53:09 -0700 Subject: [PATCH 443/618] nvme-multipath: fix deadlock between ana_work and scan_work When scan_work calls nvme_mpath_add_disk() this holds ana_lock and invokes nvme_parse_ana_log(), which may issue IO in device_add_disk() and hang waiting for an accessible path. While nvme_mpath_set_live() only called when nvme_state_is_live(), a transition may cause NVME_SC_ANA_TRANSITION and requeue the IO. In order to recover and complete the IO ana_work on the same ctrl should be able to update the path state and remove NVME_NS_ANA_PENDING. The deadlock occurs because scan_work keeps holding ana_lock, so ana_work hangs [1]. Fix: Now nvme_mpath_add_disk() uses nvme_parse_ana_log() to obtain a copy of the ANA group desc, and then calls nvme_update_ns_ana_state() without holding ana_lock. [1]: kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: io_schedule+0x16/0x40 kernel: do_read_cache_page+0x438/0x830 kernel: read_cache_page+0x12/0x20 kernel: read_dev_sector+0x27/0xc0 kernel: read_lba+0xc1/0x220 kernel: efi_partition+0x1e6/0x708 kernel: check_partition+0x154/0x244 kernel: rescan_partitions+0xae/0x280 kernel: __blkdev_get+0x40f/0x560 kernel: blkdev_get+0x3d/0x140 kernel: __device_add_disk+0x388/0x480 kernel: device_add_disk+0x13/0x20 kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core] kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core] kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core] kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core] kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core] kernel: nvme_validate_ns+0x396/0x940 [nvme_core] kernel: nvme_scan_work+0x24f/0x380 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x249/0x400 kernel: kthread+0x104/0x140 kernel: Workqueue: nvme-wq nvme_ana_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: schedule_preempt_disabled+0xe/0x10 kernel: __mutex_lock.isra.0+0x182/0x4f0 kernel: ? __switch_to_asm+0x34/0x70 kernel: ? select_task_rq_fair+0x1aa/0x5c0 kernel: ? kvm_sched_clock_read+0x11/0x20 kernel: ? sched_clock+0x9/0x10 kernel: __mutex_lock_slowpath+0x13/0x20 kernel: mutex_lock+0x2e/0x40 kernel: nvme_read_ana_log+0x3a/0x100 [nvme_core] kernel: nvme_ana_work+0x15/0x20 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x4d/0x400 kernel: kthread+0x104/0x140 kernel: ? process_one_work+0x380/0x380 kernel: ? kthread_park+0x80/0x80 kernel: ret_from_fork+0x35/0x40 Fixes: 0d0b660f214d ("nvme: add ANA support") Signed-off-by: Anton Eidelman Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig --- drivers/nvme/host/multipath.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c index da78e499947a..0ef183c1153e 100644 --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -640,26 +640,34 @@ static ssize_t ana_state_show(struct device *dev, struct device_attribute *attr, } DEVICE_ATTR_RO(ana_state); -static int nvme_set_ns_ana_state(struct nvme_ctrl *ctrl, +static int nvme_lookup_ana_group_desc(struct nvme_ctrl *ctrl, struct nvme_ana_group_desc *desc, void *data) { - struct nvme_ns *ns = data; + struct nvme_ana_group_desc *dst = data; - if (ns->ana_grpid == le32_to_cpu(desc->grpid)) { - nvme_update_ns_ana_state(desc, ns); - return -ENXIO; /* just break out of the loop */ - } + if (desc->grpid != dst->grpid) + return 0; - return 0; + *dst = *desc; + return -ENXIO; /* just break out of the loop */ } void nvme_mpath_add_disk(struct nvme_ns *ns, struct nvme_id_ns *id) { if (nvme_ctrl_use_ana(ns->ctrl)) { + struct nvme_ana_group_desc desc = { + .grpid = id->anagrpid, + .state = 0, + }; + mutex_lock(&ns->ctrl->ana_lock); ns->ana_grpid = le32_to_cpu(id->anagrpid); - nvme_parse_ana_log(ns->ctrl, ns, nvme_set_ns_ana_state); + nvme_parse_ana_log(ns->ctrl, &desc, nvme_lookup_ana_group_desc); mutex_unlock(&ns->ctrl->ana_lock); + if (desc.state) { + /* found the group desc: update */ + nvme_update_ns_ana_state(&desc, ns); + } } else { mutex_lock(&ns->head->lock); ns->ana_state = NVME_ANA_OPTIMIZED; From e164471dcf19308d154adb69e7760d8ba426a77f Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Wed, 24 Jun 2020 01:53:10 -0700 Subject: [PATCH 444/618] nvme: don't protect ns mutation with ns->head->lock Right now ns->head->lock is protecting namespace mutation which is wrong and unneeded. Move it to only protect against head mutations. While we're at it, remove unnecessary ns->head reference as we already have head pointer. The problem with this is that the head->lock spans mpath disk node I/O that may block under some conditions (if for example the controller is disconnecting or the path became inaccessible), The locking scheme does not allow any other path to enable itself, preventing blocked I/O to complete and forward-progress from there. This is a preparation patch for the fix in a subsequent patch where the disk I/O will also be done outside the head->lock. Fixes: 0d0b660f214d ("nvme: add ANA support") Signed-off-by: Anton Eidelman Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig --- drivers/nvme/host/multipath.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c index 0ef183c1153e..5c48a38aebf8 100644 --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -409,11 +409,10 @@ static void nvme_mpath_set_live(struct nvme_ns *ns) { struct nvme_ns_head *head = ns->head; - lockdep_assert_held(&ns->head->lock); - if (!head->disk) return; + mutex_lock(&head->lock); if (!(head->disk->flags & GENHD_FL_UP)) device_add_disk(&head->subsys->dev, head->disk, nvme_ns_id_attr_groups); @@ -426,9 +425,10 @@ static void nvme_mpath_set_live(struct nvme_ns *ns) __nvme_find_path(head, node); srcu_read_unlock(&head->srcu, srcu_idx); } + mutex_unlock(&head->lock); - synchronize_srcu(&ns->head->srcu); - kblockd_schedule_work(&ns->head->requeue_work); + synchronize_srcu(&head->srcu); + kblockd_schedule_work(&head->requeue_work); } static int nvme_parse_ana_log(struct nvme_ctrl *ctrl, void *data, @@ -483,14 +483,12 @@ static inline bool nvme_state_is_live(enum nvme_ana_state state) static void nvme_update_ns_ana_state(struct nvme_ana_group_desc *desc, struct nvme_ns *ns) { - mutex_lock(&ns->head->lock); ns->ana_grpid = le32_to_cpu(desc->grpid); ns->ana_state = desc->state; clear_bit(NVME_NS_ANA_PENDING, &ns->flags); if (nvme_state_is_live(ns->ana_state)) nvme_mpath_set_live(ns); - mutex_unlock(&ns->head->lock); } static int nvme_update_ana_state(struct nvme_ctrl *ctrl, @@ -669,10 +667,8 @@ void nvme_mpath_add_disk(struct nvme_ns *ns, struct nvme_id_ns *id) nvme_update_ns_ana_state(&desc, ns); } } else { - mutex_lock(&ns->head->lock); ns->ana_state = NVME_ANA_OPTIMIZED; nvme_mpath_set_live(ns); - mutex_unlock(&ns->head->lock); } if (bdi_cap_stable_pages_required(ns->queue->backing_dev_info)) { From d8a22f85609fadb46ba699e0136cc3ebdeebff79 Mon Sep 17 00:00:00 2001 From: Anton Eidelman Date: Wed, 24 Jun 2020 01:53:11 -0700 Subject: [PATCH 445/618] nvme-multipath: fix deadlock due to head->lock In the following scenario scan_work and ana_work will deadlock: When scan_work calls nvme_mpath_add_disk() this holds ana_lock and invokes nvme_parse_ana_log(), which may issue IO in device_add_disk() and hang waiting for an accessible path. While nvme_mpath_set_live() only called when nvme_state_is_live(), a transition may cause NVME_SC_ANA_TRANSITION and requeue the IO. Since nvme_mpath_set_live() holds ns->head->lock, an ana_work on ANY ctrl will not be able to complete nvme_mpath_set_live() on the same ns->head, which is required in order to update the new accessible path and remove NVME_NS_ANA_PENDING.. Therefore IO never completes: deadlock [1]. Fix: Move device_add_disk out of the head->lock and protect it with an atomic test_and_set for a new NVME_NS_HEAD_HAS_DISK bit. [1]: kernel: INFO: task kworker/u8:2:160 blocked for more than 120 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u8:2 D 0 160 2 0x80004000 kernel: Workqueue: nvme-wq nvme_ana_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: schedule_preempt_disabled+0xe/0x10 kernel: __mutex_lock.isra.0+0x182/0x4f0 kernel: __mutex_lock_slowpath+0x13/0x20 kernel: mutex_lock+0x2e/0x40 kernel: nvme_update_ns_ana_state+0x22/0x60 [nvme_core] kernel: nvme_update_ana_state+0xca/0xe0 [nvme_core] kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core] kernel: nvme_read_ana_log+0x76/0x100 [nvme_core] kernel: nvme_ana_work+0x15/0x20 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x4d/0x400 kernel: kthread+0x104/0x140 kernel: ret_from_fork+0x35/0x40 kernel: INFO: task kworker/u8:4:439 blocked for more than 120 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u8:4 D 0 439 2 0x80004000 kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: io_schedule+0x16/0x40 kernel: do_read_cache_page+0x438/0x830 kernel: read_cache_page+0x12/0x20 kernel: read_dev_sector+0x27/0xc0 kernel: read_lba+0xc1/0x220 kernel: efi_partition+0x1e6/0x708 kernel: check_partition+0x154/0x244 kernel: rescan_partitions+0xae/0x280 kernel: __blkdev_get+0x40f/0x560 kernel: blkdev_get+0x3d/0x140 kernel: __device_add_disk+0x388/0x480 kernel: device_add_disk+0x13/0x20 kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core] kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core] kernel: nvme_mpath_add_disk+0xbe/0x100 [nvme_core] kernel: nvme_validate_ns+0x396/0x940 [nvme_core] kernel: nvme_scan_work+0x256/0x390 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x4d/0x400 kernel: kthread+0x104/0x140 kernel: ret_from_fork+0x35/0x40 Fixes: 0d0b660f214d ("nvme: add ANA support") Signed-off-by: Anton Eidelman Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig --- drivers/nvme/host/multipath.c | 4 ++-- drivers/nvme/host/nvme.h | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c index 5c48a38aebf8..79c8caced81f 100644 --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -412,11 +412,11 @@ static void nvme_mpath_set_live(struct nvme_ns *ns) if (!head->disk) return; - mutex_lock(&head->lock); - if (!(head->disk->flags & GENHD_FL_UP)) + if (!test_and_set_bit(NVME_NSHEAD_DISK_LIVE, &head->flags)) device_add_disk(&head->subsys->dev, head->disk, nvme_ns_id_attr_groups); + mutex_lock(&head->lock); if (nvme_path_is_optimized(ns)) { int node, srcu_idx; diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index c0f4226d3299..2ef8d501e2a8 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -364,6 +364,8 @@ struct nvme_ns_head { spinlock_t requeue_lock; struct work_struct requeue_work; struct mutex lock; + unsigned long flags; +#define NVME_NSHEAD_DISK_LIVE 0 struct nvme_ns __rcu *current_path[]; #endif }; From c31244669f57963b6ce133a5555b118fc50aec95 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Wed, 24 Jun 2020 01:53:12 -0700 Subject: [PATCH 446/618] nvme-multipath: fix bogus request queue reference put The mpath disk node takes a reference on the request mpath request queue when adding live path to the mpath gendisk. However if we connected to an inaccessible path device_add_disk is not called, so if we disconnect and remove the mpath gendisk we endup putting an reference on the request queue that was never taken [1]. Fix that to check if we ever added a live path (using NVME_NS_HEAD_HAS_DISK flag) and if not, clear the disk->queue reference. [1]: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 1372 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0 CPU: 1 PID: 1372 Comm: nvme Tainted: G O 5.7.0-rc2+ #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:refcount_warn_saturate+0xa6/0xf0 RSP: 0018:ffffb29e8053bdc0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8b7a2f4fc060 RCX: 0000000000000007 RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8b7a3ec99980 RBP: ffff8b7a2f4fc000 R08: 00000000000002e1 R09: 0000000000000004 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: fffffffffffffff2 R14: ffffb29e8053bf08 R15: ffff8b7a320e2da0 FS: 00007f135d4ca800(0000) GS:ffff8b7a3ec80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005651178c0c30 CR3: 000000003b650005 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: disk_release+0xa2/0xc0 device_release+0x28/0x80 kobject_put+0xa5/0x1b0 nvme_put_ns_head+0x26/0x70 [nvme_core] nvme_put_ns+0x30/0x60 [nvme_core] nvme_remove_namespaces+0x9b/0xe0 [nvme_core] nvme_do_delete_ctrl+0x43/0x5c [nvme_core] nvme_sysfs_delete.cold+0x8/0xd [nvme_core] kernfs_fop_write+0xc1/0x1a0 vfs_write+0xb6/0x1a0 ksys_write+0x5f/0xe0 do_syscall_64+0x52/0x1a0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported-by: Anton Eidelman Tested-by: Anton Eidelman Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig --- drivers/nvme/host/multipath.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c index 79c8caced81f..18d084ed497e 100644 --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -690,6 +690,14 @@ void nvme_mpath_remove_disk(struct nvme_ns_head *head) kblockd_schedule_work(&head->requeue_work); flush_work(&head->requeue_work); blk_cleanup_queue(head->disk->queue); + if (!test_bit(NVME_NSHEAD_DISK_LIVE, &head->flags)) { + /* + * if device_add_disk wasn't called, prevent + * disk release to put a bogus reference on the + * request queue + */ + head->disk->queue = NULL; + } put_disk(head->disk); } From b46925a24a9ca7db03655657565e03d2de3027c8 Mon Sep 17 00:00:00 2001 From: Dennis Dalessandro Date: Tue, 23 Jun 2020 16:32:24 -0400 Subject: [PATCH 447/618] IB/hfi1: Restore kfree in dummy_netdev cleanup We need to do some rework on the dummy netdev. Calling the free_netdev() would normally make sense, and that will be addressed in an upcoming patch. For now just revert the behavior to what it was before keeping the unused variable removal part of the patch. The dd->dumm_netdev is mainly used for packet receiving through alloc_netdev_mqs() for typical net devices. A a result, it should be freed with kfree instead of free_netdev() that leads to a crash when unloading the hfi1 module: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000000855b54067 P4D 8000000855b54067 PUD 84a4f5067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 73 PID: 10299 Comm: modprobe Not tainted 5.6.0-rc5+ #1 Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0016.033120161139 03/31/2016 RIP: 0010:__hw_addr_flush+0x12/0x80 Code: 40 00 48 83 c4 08 4c 89 e7 5b 5d 41 5c e9 76 77 18 00 66 0f 1f 44 00 00 0f 1f 44 00 00 41 54 49 89 fc 55 53 48 8b 1f 48 39 df <48> 8b 2b 75 08 eb 4a 48 89 eb 48 89 c5 48 89 df e8 99 bf d0 ff 84 RSP: 0018:ffffb40e08783db8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000002 RDX: ffffb40e00000000 RSI: 0000000000000246 RDI: ffff88ab13662298 RBP: ffff88ab13662000 R08: 0000000000001549 R09: 0000000000001549 R10: 0000000000000001 R11: 0000000000aaaaaa R12: ffff88ab13662298 R13: ffff88ab1b259e20 R14: ffff88ab1b259e42 R15: 0000000000000000 FS: 00007fb39b534740(0000) GS:ffff88b31f940000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000084d3ea004 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dev_addr_flush+0x15/0x30 free_netdev+0x7e/0x130 hfi1_netdev_free+0x59/0x70 [hfi1] remove_one+0x65/0x110 [hfi1] pci_device_remove+0x3b/0xc0 device_release_driver_internal+0xec/0x1b0 driver_detach+0x46/0x90 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x26/0xa0 hfi1_mod_cleanup+0xc/0xd54 [hfi1] __x64_sys_delete_module+0x16c/0x260 ? exit_to_usermode_loop+0xa4/0xc0 do_syscall_64+0x5b/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 193ba03141bb ("IB/hfi1: Use free_netdev() in hfi1_netdev_free()") Link: https://lore.kernel.org/r/20200623203224.106975.16926.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn Signed-off-by: Kaike Wan Signed-off-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hfi1/netdev_rx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/hfi1/netdev_rx.c b/drivers/infiniband/hw/hfi1/netdev_rx.c index 63688e85e8da..6d263c9749b3 100644 --- a/drivers/infiniband/hw/hfi1/netdev_rx.c +++ b/drivers/infiniband/hw/hfi1/netdev_rx.c @@ -373,7 +373,7 @@ void hfi1_netdev_free(struct hfi1_devdata *dd) { if (dd->dummy_netdev) { dd_dev_info(dd, "hfi1 netdev freed\n"); - free_netdev(dd->dummy_netdev); + kfree(dd->dummy_netdev); dd->dummy_netdev = NULL; } } From 822fbd37410639acdae368ea55477ddd3498651d Mon Sep 17 00:00:00 2001 From: Dennis Dalessandro Date: Tue, 23 Jun 2020 16:32:30 -0400 Subject: [PATCH 448/618] IB/hfi1: Fix module use count flaw due to leftover module put calls When the try_module_get calls were removed from opening and closing of the i2c debugfs file, the corresponding module_put calls were missed. This results in an inaccurate module use count that requires a power cycle to fix. Fixes: 09fbca8e6240 ("IB/hfi1: No need to use try_module_get for debugfs") Link: https://lore.kernel.org/r/20200623203230.106975.76240.stgit@awfm-01.aw.intel.com Cc: Reviewed-by: Kaike Wan Reviewed-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hfi1/debugfs.c | 19 ++----------------- 1 file changed, 2 insertions(+), 17 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/debugfs.c b/drivers/infiniband/hw/hfi1/debugfs.c index 4633a0ce1a8c..2ced236e1553 100644 --- a/drivers/infiniband/hw/hfi1/debugfs.c +++ b/drivers/infiniband/hw/hfi1/debugfs.c @@ -985,15 +985,10 @@ static ssize_t qsfp2_debugfs_read(struct file *file, char __user *buf, static int __i2c_debugfs_open(struct inode *in, struct file *fp, u32 target) { struct hfi1_pportdata *ppd; - int ret; ppd = private2ppd(fp); - ret = acquire_chip_resource(ppd->dd, i2c_target(target), 0); - if (ret) /* failed - release the module */ - module_put(THIS_MODULE); - - return ret; + return acquire_chip_resource(ppd->dd, i2c_target(target), 0); } static int i2c1_debugfs_open(struct inode *in, struct file *fp) @@ -1013,7 +1008,6 @@ static int __i2c_debugfs_release(struct inode *in, struct file *fp, u32 target) ppd = private2ppd(fp); release_chip_resource(ppd->dd, i2c_target(target)); - module_put(THIS_MODULE); return 0; } @@ -1031,18 +1025,10 @@ static int i2c2_debugfs_release(struct inode *in, struct file *fp) static int __qsfp_debugfs_open(struct inode *in, struct file *fp, u32 target) { struct hfi1_pportdata *ppd; - int ret; - - if (!try_module_get(THIS_MODULE)) - return -ENODEV; ppd = private2ppd(fp); - ret = acquire_chip_resource(ppd->dd, i2c_target(target), 0); - if (ret) /* failed - release the module */ - module_put(THIS_MODULE); - - return ret; + return acquire_chip_resource(ppd->dd, i2c_target(target), 0); } static int qsfp1_debugfs_open(struct inode *in, struct file *fp) @@ -1062,7 +1048,6 @@ static int __qsfp_debugfs_release(struct inode *in, struct file *fp, u32 target) ppd = private2ppd(fp); release_chip_resource(ppd->dd, i2c_target(target)); - module_put(THIS_MODULE); return 0; } From 82172b765530f84b4b9da929f2dcf46f2b7b232b Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Tue, 23 Jun 2020 16:43:22 -0400 Subject: [PATCH 449/618] IB/hfi1: Correct -EBUSY handling in tx code The current code mishandles -EBUSY in two ways: - The flow change doesn't test the return from the flush and runs on to process the current packet racing with the wakeup processing - The -EBUSY handling for a single packet inserts the tx into the txlist after the submit call, racing with the same wakeup processing Fix the first by dropping the skb and returning NETDEV_TX_OK. Fix the second by insuring the the list entry within the txreq is inited when allocated. This enables the sleep routine to detect that the txreq has used the non-list api and queue the packet to the txlist. Both flaws can lead to having the flushing thread executing in causing two threads to manipulate the txlist. Fixes: d99dc602e2a5 ("IB/hfi1: Add functions to transmit datagram ipoib packets") Link: https://lore.kernel.org/r/20200623204321.108092.83898.stgit@awfm-01.aw.intel.com Reviewed-by: Kaike Wan Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hfi1/ipoib_tx.c | 33 ++++++++++++++------------- 1 file changed, 17 insertions(+), 16 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/ipoib_tx.c b/drivers/infiniband/hw/hfi1/ipoib_tx.c index 175290c56db9..76dcb5624aa6 100644 --- a/drivers/infiniband/hw/hfi1/ipoib_tx.c +++ b/drivers/infiniband/hw/hfi1/ipoib_tx.c @@ -369,6 +369,7 @@ static struct ipoib_txreq *hfi1_ipoib_send_dma_common(struct net_device *dev, tx->priv = priv; tx->txq = txp->txq; tx->skb = skb; + INIT_LIST_HEAD(&tx->txreq.list); hfi1_ipoib_build_ib_tx_headers(tx, txp); @@ -469,6 +470,7 @@ static int hfi1_ipoib_send_dma_single(struct net_device *dev, ret = hfi1_ipoib_submit_tx(txq, tx); if (likely(!ret)) { +tx_ok: trace_sdma_output_ibhdr(tx->priv->dd, &tx->sdma_hdr.hdr, ib_is_sc5(txp->flow.sc5)); @@ -478,20 +480,8 @@ static int hfi1_ipoib_send_dma_single(struct net_device *dev, txq->pkts_sent = false; - if (ret == -EBUSY) { - list_add_tail(&tx->txreq.list, &txq->tx_list); - - trace_sdma_output_ibhdr(tx->priv->dd, - &tx->sdma_hdr.hdr, - ib_is_sc5(txp->flow.sc5)); - hfi1_ipoib_check_queue_depth(txq); - return NETDEV_TX_OK; - } - - if (ret == -ECOMM) { - hfi1_ipoib_check_queue_depth(txq); - return NETDEV_TX_OK; - } + if (ret == -EBUSY || ret == -ECOMM) + goto tx_ok; sdma_txclean(priv->dd, &tx->txreq); dev_kfree_skb_any(skb); @@ -509,9 +499,17 @@ static int hfi1_ipoib_send_dma_list(struct net_device *dev, struct ipoib_txreq *tx; /* Has the flow change ? */ - if (txq->flow.as_int != txp->flow.as_int) - (void)hfi1_ipoib_flush_tx_list(dev, txq); + if (txq->flow.as_int != txp->flow.as_int) { + int ret; + ret = hfi1_ipoib_flush_tx_list(dev, txq); + if (unlikely(ret)) { + if (ret == -EBUSY) + ++dev->stats.tx_dropped; + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + } tx = hfi1_ipoib_send_dma_common(dev, skb, txp); if (IS_ERR(tx)) { int ret = PTR_ERR(tx); @@ -612,6 +610,9 @@ static int hfi1_ipoib_sdma_sleep(struct sdma_engine *sde, netif_stop_subqueue(txq->priv->netdev, txq->q_idx); + if (list_empty(&txreq->list)) + /* came from non-list submit */ + list_add_tail(&txreq->list, &txq->tx_list); if (list_empty(&txq->wait.list)) iowait_queue(pkts_sent, wait->iow, &sde->dmawait); From 38fd98afeeb79d3b148db49f81f2ec6a37a4ee00 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Tue, 23 Jun 2020 16:43:28 -0400 Subject: [PATCH 450/618] IB/hfi1: Add atomic triggered sleep/wakeup When running iperf in a two host configuration the following trace can occur: [ 319.728730] NETDEV WATCHDOG: ib0 (hfi1): transmit queue 0 timed out The issue happens because the current implementation relies on the netif txq being stopped to control the flushing of the tx list. There are two resources that the transmit logic can wait on and stop the txq: - SDMA descriptors - Ring space to hold completions The ring space is tested on the sending side and relieved when the ring is consumed in the napi tx reaping. Unfortunately, that reaping can run conncurrently with the workqueue flushing of the txlist. If the txq is started just before the workitem executes, the txlist will never be flushed, leading to the txq being stuck. Fix by: - Adding sleep/wakeup wrappers * Use an atomic to control the call to the netif routines inside the wrappers - Use another atomic to record ring space exhaustion * Only wakeup when the a ring space exhaustion has happened and it relieved Add additional wrappers to clarify the ring space resource handling. Fixes: d99dc602e2a5 ("IB/hfi1: Add functions to transmit datagram ipoib packets") Link: https://lore.kernel.org/r/20200623204327.108092.4024.stgit@awfm-01.aw.intel.com Reviewed-by: Kaike Wan Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hfi1/ipoib.h | 6 +++ drivers/infiniband/hw/hfi1/ipoib_tx.c | 67 +++++++++++++++++++-------- 2 files changed, 53 insertions(+), 20 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/ipoib.h b/drivers/infiniband/hw/hfi1/ipoib.h index 185c9b02c974..b8c9d0a003fb 100644 --- a/drivers/infiniband/hw/hfi1/ipoib.h +++ b/drivers/infiniband/hw/hfi1/ipoib.h @@ -67,6 +67,9 @@ struct hfi1_ipoib_circ_buf { * @sde: sdma engine * @tx_list: tx request list * @sent_txreqs: count of txreqs posted to sdma + * @stops: count of stops of queue + * @ring_full: ring has been filled + * @no_desc: descriptor shortage seen * @flow: tracks when list needs to be flushed for a flow change * @q_idx: ipoib Tx queue index * @pkts_sent: indicator packets have been sent from this queue @@ -80,6 +83,9 @@ struct hfi1_ipoib_txq { struct sdma_engine *sde; struct list_head tx_list; u64 sent_txreqs; + atomic_t stops; + atomic_t ring_full; + atomic_t no_desc; union hfi1_ipoib_flow flow; u8 q_idx; bool pkts_sent; diff --git a/drivers/infiniband/hw/hfi1/ipoib_tx.c b/drivers/infiniband/hw/hfi1/ipoib_tx.c index 76dcb5624aa6..9df292b51a05 100644 --- a/drivers/infiniband/hw/hfi1/ipoib_tx.c +++ b/drivers/infiniband/hw/hfi1/ipoib_tx.c @@ -55,23 +55,48 @@ static u64 hfi1_ipoib_txreqs(const u64 sent, const u64 completed) return sent - completed; } +static u64 hfi1_ipoib_used(struct hfi1_ipoib_txq *txq) +{ + return hfi1_ipoib_txreqs(txq->sent_txreqs, + atomic64_read(&txq->complete_txreqs)); +} + +static void hfi1_ipoib_stop_txq(struct hfi1_ipoib_txq *txq) +{ + if (atomic_inc_return(&txq->stops) == 1) + netif_stop_subqueue(txq->priv->netdev, txq->q_idx); +} + +static void hfi1_ipoib_wake_txq(struct hfi1_ipoib_txq *txq) +{ + if (atomic_dec_and_test(&txq->stops)) + netif_wake_subqueue(txq->priv->netdev, txq->q_idx); +} + +static uint hfi1_ipoib_ring_hwat(struct hfi1_ipoib_txq *txq) +{ + return min_t(uint, txq->priv->netdev->tx_queue_len, + txq->tx_ring.max_items - 1); +} + +static uint hfi1_ipoib_ring_lwat(struct hfi1_ipoib_txq *txq) +{ + return min_t(uint, txq->priv->netdev->tx_queue_len, + txq->tx_ring.max_items) >> 1; +} + static void hfi1_ipoib_check_queue_depth(struct hfi1_ipoib_txq *txq) { - if (unlikely(hfi1_ipoib_txreqs(++txq->sent_txreqs, - atomic64_read(&txq->complete_txreqs)) >= - min_t(unsigned int, txq->priv->netdev->tx_queue_len, - txq->tx_ring.max_items - 1))) - netif_stop_subqueue(txq->priv->netdev, txq->q_idx); + ++txq->sent_txreqs; + if (hfi1_ipoib_used(txq) >= hfi1_ipoib_ring_hwat(txq) && + !atomic_xchg(&txq->ring_full, 1)) + hfi1_ipoib_stop_txq(txq); } static void hfi1_ipoib_check_queue_stopped(struct hfi1_ipoib_txq *txq) { struct net_device *dev = txq->priv->netdev; - /* If the queue is already running just return */ - if (likely(!__netif_subqueue_stopped(dev, txq->q_idx))) - return; - /* If shutting down just return as queue state is irrelevant */ if (unlikely(dev->reg_state != NETREG_REGISTERED)) return; @@ -86,11 +111,9 @@ static void hfi1_ipoib_check_queue_stopped(struct hfi1_ipoib_txq *txq) * Use the minimum of the current tx_queue_len or the rings max txreqs * to protect against ring overflow. */ - if (hfi1_ipoib_txreqs(txq->sent_txreqs, - atomic64_read(&txq->complete_txreqs)) - < min_t(unsigned int, dev->tx_queue_len, - txq->tx_ring.max_items) >> 1) - netif_wake_subqueue(dev, txq->q_idx); + if (hfi1_ipoib_used(txq) < hfi1_ipoib_ring_lwat(txq) && + atomic_xchg(&txq->ring_full, 0)) + hfi1_ipoib_wake_txq(txq); } static void hfi1_ipoib_free_tx(struct ipoib_txreq *tx, int budget) @@ -608,13 +631,14 @@ static int hfi1_ipoib_sdma_sleep(struct sdma_engine *sde, return -EAGAIN; } - netif_stop_subqueue(txq->priv->netdev, txq->q_idx); - if (list_empty(&txreq->list)) /* came from non-list submit */ list_add_tail(&txreq->list, &txq->tx_list); - if (list_empty(&txq->wait.list)) + if (list_empty(&txq->wait.list)) { + if (!atomic_xchg(&txq->no_desc, 1)) + hfi1_ipoib_stop_txq(txq); iowait_queue(pkts_sent, wait->iow, &sde->dmawait); + } write_sequnlock(&sde->waitlock); return -EBUSY; @@ -649,9 +673,9 @@ static void hfi1_ipoib_flush_txq(struct work_struct *work) struct net_device *dev = txq->priv->netdev; if (likely(dev->reg_state == NETREG_REGISTERED) && - likely(__netif_subqueue_stopped(dev, txq->q_idx)) && likely(!hfi1_ipoib_flush_tx_list(dev, txq))) - netif_wake_subqueue(dev, txq->q_idx); + if (atomic_xchg(&txq->no_desc, 0)) + hfi1_ipoib_wake_txq(txq); } int hfi1_ipoib_txreq_init(struct hfi1_ipoib_dev_priv *priv) @@ -705,6 +729,9 @@ int hfi1_ipoib_txreq_init(struct hfi1_ipoib_dev_priv *priv) txq->sde = NULL; INIT_LIST_HEAD(&txq->tx_list); atomic64_set(&txq->complete_txreqs, 0); + atomic_set(&txq->stops, 0); + atomic_set(&txq->ring_full, 0); + atomic_set(&txq->no_desc, 0); txq->q_idx = i; txq->flow.tx_queue = 0xff; txq->flow.sc5 = 0xff; @@ -770,7 +797,7 @@ static void hfi1_ipoib_drain_tx_list(struct hfi1_ipoib_txq *txq) atomic64_inc(complete_txreqs); } - if (hfi1_ipoib_txreqs(txq->sent_txreqs, atomic64_read(complete_txreqs))) + if (hfi1_ipoib_used(txq)) dd_dev_warn(txq->priv->dd, "txq %d not empty found %llu requests\n", txq->q_idx, From dc5bdb68b5b369d5bc7d1de96fa64cc1737a6320 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 24 Jun 2020 11:29:10 +0200 Subject: [PATCH 451/618] drm/fb-helper: Fix vt restore MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In the past we had a pile of hacks to orchestrate access between fbdev emulation and native kms clients. We've tried to streamline this, by always preferring the kms side above fbdev calls when a drm master exists, because drm master controls access to the display resources. Unfortunately this breaks existing userspace, specifically Xorg. When exiting Xorg first restores the console to text mode using the KDSET ioctl on the vt. This does nothing, because a drm master is still around. Then it drops the drm master status, which again does nothing, because logind is keeping additional drm fd open to be able to orchestrate vt switches. In the past this is the point where fbdev was restored, as part of the ->lastclose hook on the drm side. Now to fix this regression we don't want to go back to letting fbdev restore things whenever it feels like, or to the pile of hacks we've had before. Instead try and go with a minimal exception to make the KDSET case work again, and nothing else. This means that if userspace does a KDSET call when switching between graphical compositors, there will be some flickering with fbcon showing up for a bit. But a) that's not a regression and b) userspace can fix it by improving the vt switching dance - logind should have all the information it needs. While pondering all this I'm also wondering wheter we should have a SWITCH_MASTER ioctl to allow race-free master status handover. But that's for another day. v2: Somehow forgot to cc all the fbdev people. v3: Fix typo Alex spotted. Reviewed-by: Alex Deucher Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208179 Cc: shlomo@fastmail.com Reported-and-Tested-by: shlomo@fastmail.com Cc: Michel Dänzer Fixes: 64914da24ea9 ("drm/fbdev-helper: don't force restores") Cc: Noralf Trønnes Cc: Thomas Zimmermann Cc: Daniel Vetter Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: David Airlie Cc: Daniel Vetter Cc: dri-devel@lists.freedesktop.org Cc: # v5.7+ Cc: Bartlomiej Zolnierkiewicz Cc: Geert Uytterhoeven Cc: Nathan Chancellor Cc: Qiujun Huang Cc: Peter Rosin Cc: linux-fbdev@vger.kernel.org Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20200624092910.3280448-1-daniel.vetter@ffwll.ch --- drivers/gpu/drm/drm_fb_helper.c | 79 +++++++++++++++++++++++--------- drivers/video/fbdev/core/fbcon.c | 3 +- include/uapi/linux/fb.h | 1 + 3 files changed, 60 insertions(+), 23 deletions(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 170aa7689110..5609e164805f 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -227,6 +227,42 @@ int drm_fb_helper_debug_leave(struct fb_info *info) } EXPORT_SYMBOL(drm_fb_helper_debug_leave); +static int +__drm_fb_helper_restore_fbdev_mode_unlocked(struct drm_fb_helper *fb_helper, + bool force) +{ + bool do_delayed; + int ret; + + if (!drm_fbdev_emulation || !fb_helper) + return -ENODEV; + + if (READ_ONCE(fb_helper->deferred_setup)) + return 0; + + mutex_lock(&fb_helper->lock); + if (force) { + /* + * Yes this is the _locked version which expects the master lock + * to be held. But for forced restores we're intentionally + * racing here, see drm_fb_helper_set_par(). + */ + ret = drm_client_modeset_commit_locked(&fb_helper->client); + } else { + ret = drm_client_modeset_commit(&fb_helper->client); + } + + do_delayed = fb_helper->delayed_hotplug; + if (do_delayed) + fb_helper->delayed_hotplug = false; + mutex_unlock(&fb_helper->lock); + + if (do_delayed) + drm_fb_helper_hotplug_event(fb_helper); + + return ret; +} + /** * drm_fb_helper_restore_fbdev_mode_unlocked - restore fbdev configuration * @fb_helper: driver-allocated fbdev helper, can be NULL @@ -240,27 +276,7 @@ EXPORT_SYMBOL(drm_fb_helper_debug_leave); */ int drm_fb_helper_restore_fbdev_mode_unlocked(struct drm_fb_helper *fb_helper) { - bool do_delayed; - int ret; - - if (!drm_fbdev_emulation || !fb_helper) - return -ENODEV; - - if (READ_ONCE(fb_helper->deferred_setup)) - return 0; - - mutex_lock(&fb_helper->lock); - ret = drm_client_modeset_commit(&fb_helper->client); - - do_delayed = fb_helper->delayed_hotplug; - if (do_delayed) - fb_helper->delayed_hotplug = false; - mutex_unlock(&fb_helper->lock); - - if (do_delayed) - drm_fb_helper_hotplug_event(fb_helper); - - return ret; + return __drm_fb_helper_restore_fbdev_mode_unlocked(fb_helper, false); } EXPORT_SYMBOL(drm_fb_helper_restore_fbdev_mode_unlocked); @@ -1318,6 +1334,7 @@ int drm_fb_helper_set_par(struct fb_info *info) { struct drm_fb_helper *fb_helper = info->par; struct fb_var_screeninfo *var = &info->var; + bool force; if (oops_in_progress) return -EBUSY; @@ -1327,7 +1344,25 @@ int drm_fb_helper_set_par(struct fb_info *info) return -EINVAL; } - drm_fb_helper_restore_fbdev_mode_unlocked(fb_helper); + /* + * Normally we want to make sure that a kms master takes precedence over + * fbdev, to avoid fbdev flickering and occasionally stealing the + * display status. But Xorg first sets the vt back to text mode using + * the KDSET IOCTL with KD_TEXT, and only after that drops the master + * status when exiting. + * + * In the past this was caught by drm_fb_helper_lastclose(), but on + * modern systems where logind always keeps a drm fd open to orchestrate + * the vt switching, this doesn't work. + * + * To not break the userspace ABI we have this special case here, which + * is only used for the above case. Everything else uses the normal + * commit function, which ensures that we never steal the display from + * an active drm master. + */ + force = var->activate & FB_ACTIVATE_KD_TEXT; + + __drm_fb_helper_restore_fbdev_mode_unlocked(fb_helper, force); return 0; } diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c index 9d28a8e3328f..e2a490c5ae08 100644 --- a/drivers/video/fbdev/core/fbcon.c +++ b/drivers/video/fbdev/core/fbcon.c @@ -2402,7 +2402,8 @@ static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch) ops->graphics = 1; if (!blank) { - var.activate = FB_ACTIVATE_NOW | FB_ACTIVATE_FORCE; + var.activate = FB_ACTIVATE_NOW | FB_ACTIVATE_FORCE | + FB_ACTIVATE_KD_TEXT; fb_set_var(info, &var); ops->graphics = 0; ops->var = info->var; diff --git a/include/uapi/linux/fb.h b/include/uapi/linux/fb.h index b6aac7ee1f67..4c14e8be7267 100644 --- a/include/uapi/linux/fb.h +++ b/include/uapi/linux/fb.h @@ -205,6 +205,7 @@ struct fb_bitfield { #define FB_ACTIVATE_ALL 64 /* change all VCs on this fb */ #define FB_ACTIVATE_FORCE 128 /* force apply even when no change*/ #define FB_ACTIVATE_INV_MODE 256 /* invalidate videomode */ +#define FB_ACTIVATE_KD_TEXT 512 /* for KDSET vt ioctl */ #define FB_ACCELF_TEXT 1 /* (OBSOLETE) see fb_info.flags and vc_mode */ From 17843655708e1941c0653af3cd61be6948e36f43 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Tue, 23 Jun 2020 18:33:15 +0200 Subject: [PATCH 452/618] openvswitch: take into account de-fragmentation/gso_size in execute_check_pkt_len ovs connection tracking module performs de-fragmentation on incoming fragmented traffic. Take info account if traffic has been de-fragmented in execute_check_pkt_len action otherwise we will perform the wrong nested action considering the original packet size. This issue typically occurs if ovs-vswitchd adds a rule in the pipeline that requires connection tracking (e.g. OVN stateful ACLs) before execute_check_pkt_len action. Moreover take into account GSO fragment size for GSO packet in execute_check_pkt_len routine Fixes: 4d5ec89fc8d14 ("net: openvswitch: Add a new action check_pkt_len") Signed-off-by: Lorenzo Bianconi Signed-off-by: David S. Miller --- net/openvswitch/actions.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c index fc0efd8833c8..2611657f40ca 100644 --- a/net/openvswitch/actions.c +++ b/net/openvswitch/actions.c @@ -1169,9 +1169,10 @@ static int execute_check_pkt_len(struct datapath *dp, struct sk_buff *skb, struct sw_flow_key *key, const struct nlattr *attr, bool last) { + struct ovs_skb_cb *ovs_cb = OVS_CB(skb); const struct nlattr *actions, *cpl_arg; + int len, max_len, rem = nla_len(attr); const struct check_pkt_len_arg *arg; - int rem = nla_len(attr); bool clone_flow_key; /* The first netlink attribute in 'attr' is always @@ -1180,7 +1181,11 @@ static int execute_check_pkt_len(struct datapath *dp, struct sk_buff *skb, cpl_arg = nla_data(attr); arg = nla_data(cpl_arg); - if (skb->len <= arg->pkt_len) { + len = ovs_cb->mru ? ovs_cb->mru + skb->mac_len : skb->len; + max_len = arg->pkt_len; + + if ((skb_is_gso(skb) && skb_gso_validate_mac_len(skb, max_len)) || + len <= max_len) { /* Second netlink attribute in 'attr' is always * 'OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_LESS_EQUAL'. */ From 1ed9ec9b08addbd8d3e36d5f4a652d8590a6ddb7 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Sat, 20 Jun 2020 21:39:25 +0200 Subject: [PATCH 453/618] dsa: Allow forwarding of redirected IGMP traffic The driver for Marvell switches puts all ports in IGMP snooping mode which results in all IGMP/MLD frames that ingress on the ports to be forwarded to the CPU only. The bridge code in the kernel can then interpret these frames and act upon them, for instance by updating the mdb in the switch to reflect multicast memberships of stations connected to the ports. However, the IGMP/MLD frames must then also be forwarded to other ports of the bridge so external IGMP queriers can track membership reports, and external multicast clients can receive query reports from foreign IGMP queriers. Currently, this is impossible as the EDSA tagger sets offload_fwd_mark on the skb when it unwraps the tagged frames, and that will make the switchdev layer prevent the skb from egressing on any other port of the same switch. To fix that, look at the To_CPU code in the DSA header and make forwarding of the frame possible for trapped IGMP packets. Introduce some #defines for the frame types to make the code a bit more comprehensive. This was tested on a Marvell 88E6352 variant. Signed-off-by: Daniel Mack Reviewed-by: Andrew Lunn Tested-by: Andrew Lunn Signed-off-by: David S. Miller --- net/dsa/tag_edsa.c | 37 ++++++++++++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-) diff --git a/net/dsa/tag_edsa.c b/net/dsa/tag_edsa.c index e8eaa804ccb9..d6200ff98200 100644 --- a/net/dsa/tag_edsa.c +++ b/net/dsa/tag_edsa.c @@ -13,6 +13,16 @@ #define DSA_HLEN 4 #define EDSA_HLEN 8 +#define FRAME_TYPE_TO_CPU 0x00 +#define FRAME_TYPE_FORWARD 0x03 + +#define TO_CPU_CODE_MGMT_TRAP 0x00 +#define TO_CPU_CODE_FRAME2REG 0x01 +#define TO_CPU_CODE_IGMP_MLD_TRAP 0x02 +#define TO_CPU_CODE_POLICY_TRAP 0x03 +#define TO_CPU_CODE_ARP_MIRROR 0x04 +#define TO_CPU_CODE_POLICY_MIRROR 0x05 + static struct sk_buff *edsa_xmit(struct sk_buff *skb, struct net_device *dev) { struct dsa_port *dp = dsa_slave_to_port(dev); @@ -77,6 +87,8 @@ static struct sk_buff *edsa_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt) { u8 *edsa_header; + int frame_type; + int code; int source_device; int source_port; @@ -91,8 +103,29 @@ static struct sk_buff *edsa_rcv(struct sk_buff *skb, struct net_device *dev, /* * Check that frame type is either TO_CPU or FORWARD. */ - if ((edsa_header[0] & 0xc0) != 0x00 && (edsa_header[0] & 0xc0) != 0xc0) + frame_type = edsa_header[0] >> 6; + + switch (frame_type) { + case FRAME_TYPE_TO_CPU: + code = (edsa_header[1] & 0x6) | ((edsa_header[2] >> 4) & 1); + + /* + * Mark the frame to never egress on any port of the same switch + * unless it's a trapped IGMP/MLD packet, in which case the + * bridge might want to forward it. + */ + if (code != TO_CPU_CODE_IGMP_MLD_TRAP) + skb->offload_fwd_mark = 1; + + break; + + case FRAME_TYPE_FORWARD: + skb->offload_fwd_mark = 1; + break; + + default: return NULL; + } /* * Determine source device and port. @@ -156,8 +189,6 @@ static struct sk_buff *edsa_rcv(struct sk_buff *skb, struct net_device *dev, 2 * ETH_ALEN); } - skb->offload_fwd_mark = 1; - return skb; } From d3d239dcb8aae6d7b10642d292b404e57604f7ea Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 24 Jun 2020 09:00:44 +0200 Subject: [PATCH 454/618] net: ethernet: mvneta: Do not error out in non serdes modes In mvneta_config_interface() the RGMII modes are catched by the default case which is an error return. The RGMII modes are valid modes for the driver, so instead of returning an error add a break statement to return successfully. This avoids this warning for non comphy SoCs which use RGMII, like SolidRun Clearfog: WARNING: CPU: 0 PID: 268 at drivers/net/ethernet/marvell/mvneta.c:3512 mvneta_start_dev+0x220/0x23c Fixes: b4748553f53f ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy") Signed-off-by: Sascha Hauer Reviewed-by: Russell King Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index af6000172848..c4552f868157 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -3571,7 +3571,7 @@ static int mvneta_config_interface(struct mvneta_port *pp, MVNETA_HSGMII_SERDES_PROTO); break; default: - return -EINVAL; + break; } } From 41c2b6b4f0f807803bb49f65835d136941a70f85 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 24 Jun 2020 09:00:45 +0200 Subject: [PATCH 455/618] net: ethernet: mvneta: Add back interface mode validation When writing the serdes configuration register was moved to mvneta_config_interface() the whole code block was removed from mvneta_port_power_up() in the assumption that its only purpose was to write the serdes configuration register. As mentioned by Russell King its purpose was also to check for valid interface modes early so that later in the driver we do not have to care for unexpected interface modes. Add back the test to let the driver bail out early on unhandled interface modes. Fixes: b4748553f53f ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy") Signed-off-by: Sascha Hauer Reviewed-by: Russell King Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index c4552f868157..c639e3a29302 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -5009,10 +5009,18 @@ static void mvneta_conf_mbus_windows(struct mvneta_port *pp, } /* Power up the port */ -static void mvneta_port_power_up(struct mvneta_port *pp, int phy_mode) +static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode) { /* MAC Cause register should be cleared */ mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0); + + if (phy_mode != PHY_INTERFACE_MODE_QSGMII && + phy_mode != PHY_INTERFACE_MODE_SGMII && + !phy_interface_mode_is_8023z(phy_mode) && + !phy_interface_mode_is_rgmii(phy_mode)) + return -EINVAL; + + return 0; } /* Device initialization routine */ @@ -5198,7 +5206,11 @@ static int mvneta_probe(struct platform_device *pdev) if (err < 0) goto err_netdev; - mvneta_port_power_up(pp, phy_mode); + err = mvneta_port_power_up(pp, pp->phy_interface); + if (err < 0) { + dev_err(&pdev->dev, "can't power up port\n"); + return err; + } /* Armada3700 network controller does not support per-cpu * operation, so only single NAPI should be initialized. @@ -5352,7 +5364,11 @@ static int mvneta_resume(struct device *device) } } mvneta_defaults_set(pp); - mvneta_port_power_up(pp, pp->phy_interface); + err = mvneta_port_power_up(pp, pp->phy_interface); + if (err < 0) { + dev_err(device, "can't power up port\n"); + return err; + } netif_device_attach(dev); From 3dd4ef1bdbac959bb20faec93937720ddd9917c6 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Wed, 24 Jun 2020 15:58:24 +0800 Subject: [PATCH 456/618] net: phy: make phy_disable_interrupts() non-static We face an issue with rtl8211f, a pin is shared between INTB and PMEB, and the PHY Register Accessible Interrupt is enabled by default, so the INTB/PMEB pin is always active in polling mode case. As Heiner pointed out "I was thinking about calling phy_disable_interrupts() in phy_init_hw(), to have a defined init state as we don't know in which state the PHY is if the PHY driver is loaded. We shouldn't assume that it's the chip power-on defaults, BIOS or boot loader could have changed this. Or in case of dual-boot systems the other OS could leave the PHY in whatever state." Make phy_disable_interrupts() non-static so that it could be used in phy_init_hw() to have a defined init state. Suggested-by: Heiner Kallweit Signed-off-by: Jisheng Zhang Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 2 +- include/linux/phy.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 1de3938628f4..56cfae950472 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -840,7 +840,7 @@ static void phy_error(struct phy_device *phydev) * phy_disable_interrupts - Disable the PHY interrupts from the PHY side * @phydev: target phy_device struct */ -static int phy_disable_interrupts(struct phy_device *phydev) +int phy_disable_interrupts(struct phy_device *phydev) { int err; diff --git a/include/linux/phy.h b/include/linux/phy.h index 8c05d0fb5c00..b693b609b2f5 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -1416,6 +1416,7 @@ int phy_ethtool_ksettings_set(struct phy_device *phydev, int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd); int phy_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd); +int phy_disable_interrupts(struct phy_device *phydev); void phy_request_interrupt(struct phy_device *phydev); void phy_free_interrupt(struct phy_device *phydev); void phy_print_status(struct phy_device *phydev); From 9886a4dbd2aacf4b044e294e4cdebb43992d44b1 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Wed, 24 Jun 2020 15:59:23 +0800 Subject: [PATCH 457/618] net: phy: call phy_disable_interrupts() in phy_init_hw() Call phy_disable_interrupts() in phy_init_hw() to "have a defined init state as we don't know in which state the PHY is if the PHY driver is loaded. We shouldn't assume that it's the chip power-on defaults, BIOS or boot loader could have changed this. Or in case of dual-boot systems the other OS could leave the PHY in whatever state." as pointed out by Heiner. Suggested-by: Heiner Kallweit Signed-off-by: Jisheng Zhang Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 85ba95b598b5..b4978c5fb2ca 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1092,6 +1092,10 @@ int phy_init_hw(struct phy_device *phydev) if (ret < 0) return ret; + ret = phy_disable_interrupts(phydev); + if (ret) + return ret; + if (phydev->drv->config_init) ret = phydev->drv->config_init(phydev); From a51243860893615b457b149da1ef5df0a4f1ffc2 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 24 Jun 2020 11:13:02 +0100 Subject: [PATCH 458/618] qed: add missing error test for DBG_STATUS_NO_MATCHING_FRAMING_MODE The error DBG_STATUS_NO_MATCHING_FRAMING_MODE was added to the enum enum dbg_status however there is a missing corresponding entry for this in the array s_status_str. This causes an out-of-bounds read when indexing into the last entry of s_status_str. Fix this by adding in the missing entry. Addresses-Coverity: ("Out-of-bounds read"). Fixes: 2d22bc8354b1 ("qed: FW 8.42.2.0 debug features") Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_debug.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_debug.c b/drivers/net/ethernet/qlogic/qed/qed_debug.c index 57a0dab88431..81e8fbe4a05b 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_debug.c +++ b/drivers/net/ethernet/qlogic/qed/qed_debug.c @@ -5568,7 +5568,8 @@ static const char * const s_status_str[] = { /* DBG_STATUS_INVALID_FILTER_TRIGGER_DWORDS */ "The filter/trigger constraint dword offsets are not enabled for recording", - + /* DBG_STATUS_NO_MATCHING_FRAMING_MODE */ + "No matching framing mode", /* DBG_STATUS_VFC_READ_ERROR */ "Error reading from VFC", From edfaf6fa73f15568d4337f208b2333f647c35810 Mon Sep 17 00:00:00 2001 From: Wenhui Sheng Date: Thu, 18 Jun 2020 15:37:04 +0800 Subject: [PATCH 459/618] drm/amdgpu: add fw release for sdma v5_0 sdma fw isn't released when module exit Reviewed-by: Hawking Zhang Signed-off-by: Wenhui Sheng Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c index b544baf306f2..5d71c23e2640 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c @@ -1298,8 +1298,12 @@ static int sdma_v5_0_sw_fini(void *handle) struct amdgpu_device *adev = (struct amdgpu_device *)handle; int i; - for (i = 0; i < adev->sdma.num_instances; i++) + for (i = 0; i < adev->sdma.num_instances; i++) { + if (adev->sdma.instance[i].fw != NULL) + release_firmware(adev->sdma.instance[i].fw); + amdgpu_ring_fini(&adev->sdma.instance[i].ring); + } return 0; } From 5ae9c378c3d88b40af72f8e8f961808e29f3e70b Mon Sep 17 00:00:00 2001 From: Stylon Wang Date: Mon, 1 Jun 2020 16:12:09 +0800 Subject: [PATCH 460/618] drm/amd/display: Enable output_bpc property on all outputs [Why] Connector property output_bpc is available on DP/eDP only. New IGT tests would benifit if this property works on HDMI. [How] Enable this read-only property on all types of connectors. Signed-off-by: Stylon Wang Reviewed-by: Nicholas Kazlauskas Acked-by: Rodrigo Siqueira Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c index 076af267b488..1d692f4f42f3 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c @@ -1058,7 +1058,6 @@ static const struct { {"link_settings", &dp_link_settings_debugfs_fops}, {"phy_settings", &dp_phy_settings_debugfs_fop}, {"test_pattern", &dp_phy_test_pattern_fops}, - {"output_bpc", &output_bpc_fops}, {"vrr_range", &vrr_range_fops}, #ifdef CONFIG_DRM_AMD_DC_HDCP {"hdcp_sink_capability", &hdcp_sink_capability_fops}, @@ -1142,6 +1141,9 @@ void connector_debugfs_init(struct amdgpu_dm_connector *connector) debugfs_create_file_unsafe("force_yuv420_output", 0644, dir, connector, &force_yuv420_output_fops); + debugfs_create_file("output_bpc", 0644, dir, connector, + &output_bpc_fops); + connector->debugfs_dpcd_address = 0; connector->debugfs_dpcd_size = 0; From fa7041d9d2fc7401cece43f305eb5b87b7017fc4 Mon Sep 17 00:00:00 2001 From: Stylon Wang Date: Fri, 12 Jun 2020 19:04:18 +0800 Subject: [PATCH 461/618] drm/amd/display: Fix ineffective setting of max bpc property [Why] Regression was introduced where setting max bpc property has no effect on the atomic check and final commit. It has the same effect as max bpc being stuck at 8. [How] Correctly propagate max bpc with the new connector state. Signed-off-by: Stylon Wang Reviewed-by: Nicholas Kazlauskas Acked-by: Rodrigo Siqueira Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 7ced9f87be97..10ac8076d4f2 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -5024,7 +5024,8 @@ create_validate_stream_for_sink(struct amdgpu_dm_connector *aconnector, struct drm_connector *connector = &aconnector->base; struct amdgpu_device *adev = connector->dev->dev_private; struct dc_stream_state *stream; - int requested_bpc = connector->state ? connector->state->max_requested_bpc : 8; + const struct drm_connector_state *drm_state = dm_state ? &dm_state->base : NULL; + int requested_bpc = drm_state ? drm_state->max_requested_bpc : 8; enum dc_status dc_result = DC_OK; do { From b5b78a6c8d8cb9c307bc6b16a754603424459d6e Mon Sep 17 00:00:00 2001 From: Bernard Zhao Date: Sat, 20 Jun 2020 17:11:52 +0800 Subject: [PATCH 462/618] drm/amd: fix potential memleak in err branch The function kobject_init_and_add alloc memory like: kobject_init_and_add->kobject_add_varg->kobject_set_name_vargs ->kvasprintf_const->kstrdup_const->kstrdup->kmalloc_track_caller ->kmalloc_slab, in err branch this memory not free. If use kmemleak, this path maybe catched. These changes are to add kobject_put in kobject_init_and_add failed branch, fix potential memleak. Signed-off-by: Bernard Zhao Reviewed-by: Felix Kuehling Signed-off-by: Felix Kuehling Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_process.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process.c b/drivers/gpu/drm/amd/amdkfd/kfd_process.c index d27221ddcdeb..0e0c42e9f6a3 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_process.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_process.c @@ -428,6 +428,7 @@ struct kfd_process *kfd_create_process(struct file *filep) (int)process->lead_thread->pid); if (ret) { pr_warn("Creating procfs pid directory failed"); + kobject_put(process->kobj); goto out; } From 715028460082d07a7ec6fcd87b14b46784346a72 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 10 Jun 2020 21:51:11 +0100 Subject: [PATCH 463/618] netfilter: ipset: fix unaligned atomic access When using ip_set with counters and comment, traffic causes the kernel to panic on 32-bit ARM: Alignment trap: not handling instruction e1b82f9f at [] Unhandled fault: alignment exception (0x221) at 0xea08133c PC is at ip_set_match_extensions+0xe0/0x224 [ip_set] The problem occurs when we try to update the 64-bit counters - the faulting address above is not 64-bit aligned. The problem occurs due to the way elements are allocated, for example: set->dsize = ip_set_elem_len(set, tb, 0, 0); map = ip_set_alloc(sizeof(*map) + elements * set->dsize); If the element has a requirement for a member to be 64-bit aligned, and set->dsize is not a multiple of 8, but is a multiple of four, then every odd numbered elements will be misaligned - and hitting an atomic64_add() on that element will cause the kernel to panic. ip_set_elem_len() must return a size that is rounded to the maximum alignment of any extension field stored in the element. This change ensures that is the case. Fixes: 95ad1f4a9358 ("netfilter: ipset: Fix extension alignment") Signed-off-by: Russell King Acked-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipset/ip_set_core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c index 340cb955af25..56621d6bfd29 100644 --- a/net/netfilter/ipset/ip_set_core.c +++ b/net/netfilter/ipset/ip_set_core.c @@ -460,6 +460,8 @@ ip_set_elem_len(struct ip_set *set, struct nlattr *tb[], size_t len, for (id = 0; id < IPSET_EXT_ID_MAX; id++) { if (!add_extension(id, cadt_flags, tb)) continue; + if (align < ip_set_extensions[id].align) + align = ip_set_extensions[id].align; len = ALIGN(len, ip_set_extensions[id].align); set->offset[id] = len; set->extensions |= ip_set_extensions[id].type; From 4cacc39516784670aa09833a9ec8bf3e90bef561 Mon Sep 17 00:00:00 2001 From: Rob Gill Date: Sun, 21 Jun 2020 05:27:36 +0000 Subject: [PATCH 464/618] netfilter: Add MODULE_DESCRIPTION entries to kernel modules The user tool modinfo is used to get information on kernel modules, including a description where it is available. This patch adds a brief MODULE_DESCRIPTION to netfilter kernel modules (descriptions taken from Kconfig file or code comments) Signed-off-by: Rob Gill Signed-off-by: Pablo Neira Ayuso --- net/bridge/netfilter/nft_meta_bridge.c | 1 + net/bridge/netfilter/nft_reject_bridge.c | 1 + net/ipv4/netfilter/ipt_SYNPROXY.c | 1 + net/ipv4/netfilter/nf_flow_table_ipv4.c | 1 + net/ipv4/netfilter/nft_dup_ipv4.c | 1 + net/ipv4/netfilter/nft_fib_ipv4.c | 1 + net/ipv4/netfilter/nft_reject_ipv4.c | 1 + net/ipv6/netfilter/ip6t_SYNPROXY.c | 1 + net/ipv6/netfilter/nf_flow_table_ipv6.c | 1 + net/ipv6/netfilter/nft_dup_ipv6.c | 1 + net/ipv6/netfilter/nft_fib_ipv6.c | 1 + net/ipv6/netfilter/nft_reject_ipv6.c | 1 + net/netfilter/nf_dup_netdev.c | 1 + net/netfilter/nf_flow_table_core.c | 1 + net/netfilter/nf_flow_table_inet.c | 1 + net/netfilter/nf_synproxy_core.c | 1 + net/netfilter/nfnetlink.c | 1 + net/netfilter/nft_compat.c | 1 + net/netfilter/nft_connlimit.c | 1 + net/netfilter/nft_counter.c | 1 + net/netfilter/nft_ct.c | 1 + net/netfilter/nft_dup_netdev.c | 1 + net/netfilter/nft_fib_inet.c | 1 + net/netfilter/nft_fib_netdev.c | 1 + net/netfilter/nft_flow_offload.c | 1 + net/netfilter/nft_hash.c | 1 + net/netfilter/nft_limit.c | 1 + net/netfilter/nft_log.c | 1 + net/netfilter/nft_masq.c | 1 + net/netfilter/nft_nat.c | 1 + net/netfilter/nft_numgen.c | 1 + net/netfilter/nft_objref.c | 1 + net/netfilter/nft_osf.c | 1 + net/netfilter/nft_queue.c | 1 + net/netfilter/nft_quota.c | 1 + net/netfilter/nft_redir.c | 1 + net/netfilter/nft_reject.c | 1 + net/netfilter/nft_reject_inet.c | 1 + net/netfilter/nft_synproxy.c | 1 + net/netfilter/nft_tunnel.c | 1 + net/netfilter/xt_nat.c | 1 + 41 files changed, 41 insertions(+) diff --git a/net/bridge/netfilter/nft_meta_bridge.c b/net/bridge/netfilter/nft_meta_bridge.c index 7c9e92b2f806..8e8ffac037cd 100644 --- a/net/bridge/netfilter/nft_meta_bridge.c +++ b/net/bridge/netfilter/nft_meta_bridge.c @@ -155,3 +155,4 @@ module_exit(nft_meta_bridge_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("wenxu "); MODULE_ALIAS_NFT_AF_EXPR(AF_BRIDGE, "meta"); +MODULE_DESCRIPTION("Support for bridge dedicated meta key"); diff --git a/net/bridge/netfilter/nft_reject_bridge.c b/net/bridge/netfilter/nft_reject_bridge.c index f48cf4cfb80f..deae2c9a0f69 100644 --- a/net/bridge/netfilter/nft_reject_bridge.c +++ b/net/bridge/netfilter/nft_reject_bridge.c @@ -455,3 +455,4 @@ module_exit(nft_reject_bridge_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pablo Neira Ayuso "); MODULE_ALIAS_NFT_AF_EXPR(AF_BRIDGE, "reject"); +MODULE_DESCRIPTION("Reject packets from bridge via nftables"); diff --git a/net/ipv4/netfilter/ipt_SYNPROXY.c b/net/ipv4/netfilter/ipt_SYNPROXY.c index 748dc3ce58d3..f2984c7eef40 100644 --- a/net/ipv4/netfilter/ipt_SYNPROXY.c +++ b/net/ipv4/netfilter/ipt_SYNPROXY.c @@ -118,3 +118,4 @@ module_exit(synproxy_tg4_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Patrick McHardy "); +MODULE_DESCRIPTION("Intercept TCP connections and establish them using syncookies"); diff --git a/net/ipv4/netfilter/nf_flow_table_ipv4.c b/net/ipv4/netfilter/nf_flow_table_ipv4.c index e32e41b99f0f..aba65fe90345 100644 --- a/net/ipv4/netfilter/nf_flow_table_ipv4.c +++ b/net/ipv4/netfilter/nf_flow_table_ipv4.c @@ -34,3 +34,4 @@ module_exit(nf_flow_ipv4_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pablo Neira Ayuso "); MODULE_ALIAS_NF_FLOWTABLE(AF_INET); +MODULE_DESCRIPTION("Netfilter flow table support"); diff --git a/net/ipv4/netfilter/nft_dup_ipv4.c b/net/ipv4/netfilter/nft_dup_ipv4.c index abf89b972094..bcdb37f86a94 100644 --- a/net/ipv4/netfilter/nft_dup_ipv4.c +++ b/net/ipv4/netfilter/nft_dup_ipv4.c @@ -107,3 +107,4 @@ module_exit(nft_dup_ipv4_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pablo Neira Ayuso "); MODULE_ALIAS_NFT_AF_EXPR(AF_INET, "dup"); +MODULE_DESCRIPTION("IPv4 nftables packet duplication support"); diff --git a/net/ipv4/netfilter/nft_fib_ipv4.c b/net/ipv4/netfilter/nft_fib_ipv4.c index ce294113dbcd..03df986217b7 100644 --- a/net/ipv4/netfilter/nft_fib_ipv4.c +++ b/net/ipv4/netfilter/nft_fib_ipv4.c @@ -210,3 +210,4 @@ module_exit(nft_fib4_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Florian Westphal "); MODULE_ALIAS_NFT_AF_EXPR(2, "fib"); +MODULE_DESCRIPTION("nftables fib / ip route lookup support"); diff --git a/net/ipv4/netfilter/nft_reject_ipv4.c b/net/ipv4/netfilter/nft_reject_ipv4.c index 7e6fd5cde50f..e408f813f5d8 100644 --- a/net/ipv4/netfilter/nft_reject_ipv4.c +++ b/net/ipv4/netfilter/nft_reject_ipv4.c @@ -71,3 +71,4 @@ module_exit(nft_reject_ipv4_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Patrick McHardy "); MODULE_ALIAS_NFT_AF_EXPR(AF_INET, "reject"); +MODULE_DESCRIPTION("IPv4 packet rejection for nftables"); diff --git a/net/ipv6/netfilter/ip6t_SYNPROXY.c b/net/ipv6/netfilter/ip6t_SYNPROXY.c index fd1f52a21bf1..d51d0c3e5fe9 100644 --- a/net/ipv6/netfilter/ip6t_SYNPROXY.c +++ b/net/ipv6/netfilter/ip6t_SYNPROXY.c @@ -121,3 +121,4 @@ module_exit(synproxy_tg6_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Patrick McHardy "); +MODULE_DESCRIPTION("Intercept IPv6 TCP connections and establish them using syncookies"); diff --git a/net/ipv6/netfilter/nf_flow_table_ipv6.c b/net/ipv6/netfilter/nf_flow_table_ipv6.c index a8566ee12e83..667b8af2546a 100644 --- a/net/ipv6/netfilter/nf_flow_table_ipv6.c +++ b/net/ipv6/netfilter/nf_flow_table_ipv6.c @@ -35,3 +35,4 @@ module_exit(nf_flow_ipv6_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pablo Neira Ayuso "); MODULE_ALIAS_NF_FLOWTABLE(AF_INET6); +MODULE_DESCRIPTION("Netfilter flow table IPv6 module"); diff --git a/net/ipv6/netfilter/nft_dup_ipv6.c b/net/ipv6/netfilter/nft_dup_ipv6.c index 2af32200507d..8b5193efb1f1 100644 --- a/net/ipv6/netfilter/nft_dup_ipv6.c +++ b/net/ipv6/netfilter/nft_dup_ipv6.c @@ -105,3 +105,4 @@ module_exit(nft_dup_ipv6_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pablo Neira Ayuso "); MODULE_ALIAS_NFT_AF_EXPR(AF_INET6, "dup"); +MODULE_DESCRIPTION("IPv6 nftables packet duplication support"); diff --git a/net/ipv6/netfilter/nft_fib_ipv6.c b/net/ipv6/netfilter/nft_fib_ipv6.c index 7ece86afd079..e204163c7036 100644 --- a/net/ipv6/netfilter/nft_fib_ipv6.c +++ b/net/ipv6/netfilter/nft_fib_ipv6.c @@ -255,3 +255,4 @@ module_exit(nft_fib6_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Florian Westphal "); MODULE_ALIAS_NFT_AF_EXPR(10, "fib"); +MODULE_DESCRIPTION("nftables fib / ipv6 route lookup support"); diff --git a/net/ipv6/netfilter/nft_reject_ipv6.c b/net/ipv6/netfilter/nft_reject_ipv6.c index 680a28ce29fd..c1098a1968e1 100644 --- a/net/ipv6/netfilter/nft_reject_ipv6.c +++ b/net/ipv6/netfilter/nft_reject_ipv6.c @@ -72,3 +72,4 @@ module_exit(nft_reject_ipv6_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Patrick McHardy "); MODULE_ALIAS_NFT_AF_EXPR(AF_INET6, "reject"); +MODULE_DESCRIPTION("IPv6 packet rejection for nftables"); diff --git a/net/netfilter/nf_dup_netdev.c b/net/netfilter/nf_dup_netdev.c index f108a76925dd..2b01a151eaa8 100644 --- a/net/netfilter/nf_dup_netdev.c +++ b/net/netfilter/nf_dup_netdev.c @@ -73,3 +73,4 @@ EXPORT_SYMBOL_GPL(nft_fwd_dup_netdev_offload); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pablo Neira Ayuso "); +MODULE_DESCRIPTION("Netfilter packet duplication support"); diff --git a/net/netfilter/nf_flow_table_core.c b/net/netfilter/nf_flow_table_core.c index afa85171df38..b1eb5272b379 100644 --- a/net/netfilter/nf_flow_table_core.c +++ b/net/netfilter/nf_flow_table_core.c @@ -594,3 +594,4 @@ module_exit(nf_flow_table_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pablo Neira Ayuso "); +MODULE_DESCRIPTION("Netfilter flow table module"); diff --git a/net/netfilter/nf_flow_table_inet.c b/net/netfilter/nf_flow_table_inet.c index 88bedf1ff1ae..bc4126d8ef65 100644 --- a/net/netfilter/nf_flow_table_inet.c +++ b/net/netfilter/nf_flow_table_inet.c @@ -72,3 +72,4 @@ module_exit(nf_flow_inet_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pablo Neira Ayuso "); MODULE_ALIAS_NF_FLOWTABLE(1); /* NFPROTO_INET */ +MODULE_DESCRIPTION("Netfilter flow table mixed IPv4/IPv6 module"); diff --git a/net/netfilter/nf_synproxy_core.c b/net/netfilter/nf_synproxy_core.c index b9cbe1e2453e..ebcdc8e54476 100644 --- a/net/netfilter/nf_synproxy_core.c +++ b/net/netfilter/nf_synproxy_core.c @@ -1237,3 +1237,4 @@ EXPORT_SYMBOL_GPL(nf_synproxy_ipv6_fini); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Patrick McHardy "); +MODULE_DESCRIPTION("nftables SYNPROXY expression support"); diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c index 99127e2d95a8..5f24edf95830 100644 --- a/net/netfilter/nfnetlink.c +++ b/net/netfilter/nfnetlink.c @@ -33,6 +33,7 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Harald Welte "); MODULE_ALIAS_NET_PF_PROTO(PF_NETLINK, NETLINK_NETFILTER); +MODULE_DESCRIPTION("Netfilter messages via netlink socket"); #define nfnl_dereference_protected(id) \ rcu_dereference_protected(table[(id)].subsys, \ diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c index f9adca62ccb3..aa1a066cb74b 100644 --- a/net/netfilter/nft_compat.c +++ b/net/netfilter/nft_compat.c @@ -902,3 +902,4 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pablo Neira Ayuso "); MODULE_ALIAS_NFT_EXPR("match"); MODULE_ALIAS_NFT_EXPR("target"); +MODULE_DESCRIPTION("x_tables over nftables support"); diff --git a/net/netfilter/nft_connlimit.c b/net/netfilter/nft_connlimit.c index 69d6173f91e2..7d0761fad37e 100644 --- a/net/netfilter/nft_connlimit.c +++ b/net/netfilter/nft_connlimit.c @@ -280,3 +280,4 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pablo Neira Ayuso"); MODULE_ALIAS_NFT_EXPR("connlimit"); MODULE_ALIAS_NFT_OBJ(NFT_OBJECT_CONNLIMIT); +MODULE_DESCRIPTION("nftables connlimit rule support"); diff --git a/net/netfilter/nft_counter.c b/net/netfilter/nft_counter.c index f6d4d0fa23a6..85ed461ec24e 100644 --- a/net/netfilter/nft_counter.c +++ b/net/netfilter/nft_counter.c @@ -303,3 +303,4 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Patrick McHardy "); MODULE_ALIAS_NFT_EXPR("counter"); MODULE_ALIAS_NFT_OBJ(NFT_OBJECT_COUNTER); +MODULE_DESCRIPTION("nftables counter rule support"); diff --git a/net/netfilter/nft_ct.c b/net/netfilter/nft_ct.c index faea72c2df32..77258af1fce0 100644 --- a/net/netfilter/nft_ct.c +++ b/net/netfilter/nft_ct.c @@ -1345,3 +1345,4 @@ MODULE_ALIAS_NFT_EXPR("notrack"); MODULE_ALIAS_NFT_OBJ(NFT_OBJECT_CT_HELPER); MODULE_ALIAS_NFT_OBJ(NFT_OBJECT_CT_TIMEOUT); MODULE_ALIAS_NFT_OBJ(NFT_OBJECT_CT_EXPECT); +MODULE_DESCRIPTION("Netfilter nf_tables conntrack module"); diff --git a/net/netfilter/nft_dup_netdev.c b/net/netfilter/nft_dup_netdev.c index c2e78c160fd7..40788b3f1071 100644 --- a/net/netfilter/nft_dup_netdev.c +++ b/net/netfilter/nft_dup_netdev.c @@ -102,3 +102,4 @@ module_exit(nft_dup_netdev_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pablo Neira Ayuso "); MODULE_ALIAS_NFT_AF_EXPR(5, "dup"); +MODULE_DESCRIPTION("nftables netdev packet duplication support"); diff --git a/net/netfilter/nft_fib_inet.c b/net/netfilter/nft_fib_inet.c index 465432e0531b..a88d44e163d1 100644 --- a/net/netfilter/nft_fib_inet.c +++ b/net/netfilter/nft_fib_inet.c @@ -76,3 +76,4 @@ module_exit(nft_fib_inet_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Florian Westphal "); MODULE_ALIAS_NFT_AF_EXPR(1, "fib"); +MODULE_DESCRIPTION("nftables fib inet support"); diff --git a/net/netfilter/nft_fib_netdev.c b/net/netfilter/nft_fib_netdev.c index a2e726ae7f07..3f3478abd845 100644 --- a/net/netfilter/nft_fib_netdev.c +++ b/net/netfilter/nft_fib_netdev.c @@ -85,3 +85,4 @@ module_exit(nft_fib_netdev_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pablo M. Bermudo Garay "); MODULE_ALIAS_NFT_AF_EXPR(5, "fib"); +MODULE_DESCRIPTION("nftables netdev fib lookups support"); diff --git a/net/netfilter/nft_flow_offload.c b/net/netfilter/nft_flow_offload.c index b70b48996801..3b9b97aa4b32 100644 --- a/net/netfilter/nft_flow_offload.c +++ b/net/netfilter/nft_flow_offload.c @@ -286,3 +286,4 @@ module_exit(nft_flow_offload_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pablo Neira Ayuso "); MODULE_ALIAS_NFT_EXPR("flow_offload"); +MODULE_DESCRIPTION("nftables hardware flow offload module"); diff --git a/net/netfilter/nft_hash.c b/net/netfilter/nft_hash.c index b836d550b919..96371d878e7e 100644 --- a/net/netfilter/nft_hash.c +++ b/net/netfilter/nft_hash.c @@ -248,3 +248,4 @@ module_exit(nft_hash_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Laura Garcia "); MODULE_ALIAS_NFT_EXPR("hash"); +MODULE_DESCRIPTION("Netfilter nftables hash module"); diff --git a/net/netfilter/nft_limit.c b/net/netfilter/nft_limit.c index 35b67d7e3694..0e2c315c3b5e 100644 --- a/net/netfilter/nft_limit.c +++ b/net/netfilter/nft_limit.c @@ -372,3 +372,4 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Patrick McHardy "); MODULE_ALIAS_NFT_EXPR("limit"); MODULE_ALIAS_NFT_OBJ(NFT_OBJECT_LIMIT); +MODULE_DESCRIPTION("nftables limit expression support"); diff --git a/net/netfilter/nft_log.c b/net/netfilter/nft_log.c index fe4831f2258f..57899454a530 100644 --- a/net/netfilter/nft_log.c +++ b/net/netfilter/nft_log.c @@ -298,3 +298,4 @@ module_exit(nft_log_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Patrick McHardy "); MODULE_ALIAS_NFT_EXPR("log"); +MODULE_DESCRIPTION("Netfilter nf_tables log module"); diff --git a/net/netfilter/nft_masq.c b/net/netfilter/nft_masq.c index bc9fd98c5d6d..71390b727040 100644 --- a/net/netfilter/nft_masq.c +++ b/net/netfilter/nft_masq.c @@ -305,3 +305,4 @@ module_exit(nft_masq_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Arturo Borrero Gonzalez "); MODULE_ALIAS_NFT_EXPR("masq"); +MODULE_DESCRIPTION("Netfilter nftables masquerade expression support"); diff --git a/net/netfilter/nft_nat.c b/net/netfilter/nft_nat.c index 23a7bfd10521..4bcf33b049c4 100644 --- a/net/netfilter/nft_nat.c +++ b/net/netfilter/nft_nat.c @@ -402,3 +402,4 @@ module_exit(nft_nat_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Tomasz Bursztyka "); MODULE_ALIAS_NFT_EXPR("nat"); +MODULE_DESCRIPTION("Network Address Translation support"); diff --git a/net/netfilter/nft_numgen.c b/net/netfilter/nft_numgen.c index 48edb9d5f012..f1fc824f9737 100644 --- a/net/netfilter/nft_numgen.c +++ b/net/netfilter/nft_numgen.c @@ -217,3 +217,4 @@ module_exit(nft_ng_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Laura Garcia "); MODULE_ALIAS_NFT_EXPR("numgen"); +MODULE_DESCRIPTION("nftables number generator module"); diff --git a/net/netfilter/nft_objref.c b/net/netfilter/nft_objref.c index bfd18d2b65a2..5f9207a9f485 100644 --- a/net/netfilter/nft_objref.c +++ b/net/netfilter/nft_objref.c @@ -252,3 +252,4 @@ module_exit(nft_objref_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pablo Neira Ayuso "); MODULE_ALIAS_NFT_EXPR("objref"); +MODULE_DESCRIPTION("nftables stateful object reference module"); diff --git a/net/netfilter/nft_osf.c b/net/netfilter/nft_osf.c index b42247aa48a9..c261d57a666a 100644 --- a/net/netfilter/nft_osf.c +++ b/net/netfilter/nft_osf.c @@ -149,3 +149,4 @@ module_exit(nft_osf_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Fernando Fernandez "); MODULE_ALIAS_NFT_EXPR("osf"); +MODULE_DESCRIPTION("nftables passive OS fingerprint support"); diff --git a/net/netfilter/nft_queue.c b/net/netfilter/nft_queue.c index 5ece0a6aa8c3..23265d757acb 100644 --- a/net/netfilter/nft_queue.c +++ b/net/netfilter/nft_queue.c @@ -216,3 +216,4 @@ module_exit(nft_queue_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Eric Leblond "); MODULE_ALIAS_NFT_EXPR("queue"); +MODULE_DESCRIPTION("Netfilter nftables queue module"); diff --git a/net/netfilter/nft_quota.c b/net/netfilter/nft_quota.c index 4413690591f2..0363f533a42b 100644 --- a/net/netfilter/nft_quota.c +++ b/net/netfilter/nft_quota.c @@ -254,3 +254,4 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pablo Neira Ayuso "); MODULE_ALIAS_NFT_EXPR("quota"); MODULE_ALIAS_NFT_OBJ(NFT_OBJECT_QUOTA); +MODULE_DESCRIPTION("Netfilter nftables quota module"); diff --git a/net/netfilter/nft_redir.c b/net/netfilter/nft_redir.c index 5b779171565c..2056051c0af0 100644 --- a/net/netfilter/nft_redir.c +++ b/net/netfilter/nft_redir.c @@ -292,3 +292,4 @@ module_exit(nft_redir_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Arturo Borrero Gonzalez "); MODULE_ALIAS_NFT_EXPR("redir"); +MODULE_DESCRIPTION("Netfilter nftables redirect support"); diff --git a/net/netfilter/nft_reject.c b/net/netfilter/nft_reject.c index 00f865fb80ca..86eafbb0fdd0 100644 --- a/net/netfilter/nft_reject.c +++ b/net/netfilter/nft_reject.c @@ -119,3 +119,4 @@ EXPORT_SYMBOL_GPL(nft_reject_icmpv6_code); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Patrick McHardy "); +MODULE_DESCRIPTION("Netfilter x_tables over nftables module"); diff --git a/net/netfilter/nft_reject_inet.c b/net/netfilter/nft_reject_inet.c index f41f414b72d1..cf8f2646e93c 100644 --- a/net/netfilter/nft_reject_inet.c +++ b/net/netfilter/nft_reject_inet.c @@ -149,3 +149,4 @@ module_exit(nft_reject_inet_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Patrick McHardy "); MODULE_ALIAS_NFT_AF_EXPR(1, "reject"); +MODULE_DESCRIPTION("Netfilter nftables reject inet support"); diff --git a/net/netfilter/nft_synproxy.c b/net/netfilter/nft_synproxy.c index e2c1fc608841..4fda8b3f1762 100644 --- a/net/netfilter/nft_synproxy.c +++ b/net/netfilter/nft_synproxy.c @@ -388,3 +388,4 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Fernando Fernandez "); MODULE_ALIAS_NFT_EXPR("synproxy"); MODULE_ALIAS_NFT_OBJ(NFT_OBJECT_SYNPROXY); +MODULE_DESCRIPTION("nftables SYNPROXY expression support"); diff --git a/net/netfilter/nft_tunnel.c b/net/netfilter/nft_tunnel.c index 30be5787fbde..d3eb953d0333 100644 --- a/net/netfilter/nft_tunnel.c +++ b/net/netfilter/nft_tunnel.c @@ -719,3 +719,4 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pablo Neira Ayuso "); MODULE_ALIAS_NFT_EXPR("tunnel"); MODULE_ALIAS_NFT_OBJ(NFT_OBJECT_TUNNEL); +MODULE_DESCRIPTION("nftables tunnel expression support"); diff --git a/net/netfilter/xt_nat.c b/net/netfilter/xt_nat.c index a8e5f6c8db7a..b4f7bbc3f3ca 100644 --- a/net/netfilter/xt_nat.c +++ b/net/netfilter/xt_nat.c @@ -244,3 +244,4 @@ MODULE_ALIAS("ipt_SNAT"); MODULE_ALIAS("ipt_DNAT"); MODULE_ALIAS("ip6t_SNAT"); MODULE_ALIAS("ip6t_DNAT"); +MODULE_DESCRIPTION("SNAT and DNAT targets support"); From 1cbf90985f7448f1b0dd630e17ee1070f7d58665 Mon Sep 17 00:00:00 2001 From: David Wilder Date: Mon, 22 Jun 2020 10:10:11 -0700 Subject: [PATCH 465/618] netfilter: iptables: Split ipt_unregister_table() into pre_exit and exit helpers. The pre_exit will un-register the underlying hook and .exit will do the table freeing. The netns core does an unconditional synchronize_rcu after the pre_exit hooks insuring no packets are in flight that have picked up the pointer before completing the un-register. Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default") Signed-off-by: David Wilder Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter_ipv4/ip_tables.h | 6 ++++++ net/ipv4/netfilter/ip_tables.c | 15 ++++++++++++++- 2 files changed, 20 insertions(+), 1 deletion(-) diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h index b394bd4f68a3..c4676d6feeff 100644 --- a/include/linux/netfilter_ipv4/ip_tables.h +++ b/include/linux/netfilter_ipv4/ip_tables.h @@ -25,6 +25,12 @@ int ipt_register_table(struct net *net, const struct xt_table *table, const struct ipt_replace *repl, const struct nf_hook_ops *ops, struct xt_table **res); + +void ipt_unregister_table_pre_exit(struct net *net, struct xt_table *table, + const struct nf_hook_ops *ops); + +void ipt_unregister_table_exit(struct net *net, struct xt_table *table); + void ipt_unregister_table(struct net *net, struct xt_table *table, const struct nf_hook_ops *ops); diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c index c2670eaa74e6..5bf9fa06aee0 100644 --- a/net/ipv4/netfilter/ip_tables.c +++ b/net/ipv4/netfilter/ip_tables.c @@ -1797,11 +1797,22 @@ int ipt_register_table(struct net *net, const struct xt_table *table, return ret; } +void ipt_unregister_table_pre_exit(struct net *net, struct xt_table *table, + const struct nf_hook_ops *ops) +{ + nf_unregister_net_hooks(net, ops, hweight32(table->valid_hooks)); +} + +void ipt_unregister_table_exit(struct net *net, struct xt_table *table) +{ + __ipt_unregister_table(net, table); +} + void ipt_unregister_table(struct net *net, struct xt_table *table, const struct nf_hook_ops *ops) { if (ops) - nf_unregister_net_hooks(net, ops, hweight32(table->valid_hooks)); + ipt_unregister_table_pre_exit(net, table, ops); __ipt_unregister_table(net, table); } @@ -1958,6 +1969,8 @@ static void __exit ip_tables_fini(void) EXPORT_SYMBOL(ipt_register_table); EXPORT_SYMBOL(ipt_unregister_table); +EXPORT_SYMBOL(ipt_unregister_table_pre_exit); +EXPORT_SYMBOL(ipt_unregister_table_exit); EXPORT_SYMBOL(ipt_do_table); module_init(ip_tables_init); module_exit(ip_tables_fini); From cf4cbc610bfa29a88cd71ca638a890f8c565a22e Mon Sep 17 00:00:00 2001 From: David Wilder Date: Mon, 22 Jun 2020 10:10:12 -0700 Subject: [PATCH 466/618] netfilter: iptables: Add a .pre_exit hook in all iptable_foo.c. Using new helpers ipt_unregister_table_pre_exit() and ipt_unregister_table_exit(). Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default") Signed-off-by: David Wilder Signed-off-by: Pablo Neira Ayuso --- net/ipv4/netfilter/iptable_filter.c | 10 +++++++++- net/ipv4/netfilter/iptable_mangle.c | 10 +++++++++- net/ipv4/netfilter/iptable_nat.c | 10 ++++++++-- net/ipv4/netfilter/iptable_raw.c | 10 +++++++++- net/ipv4/netfilter/iptable_security.c | 11 +++++++++-- 5 files changed, 44 insertions(+), 7 deletions(-) diff --git a/net/ipv4/netfilter/iptable_filter.c b/net/ipv4/netfilter/iptable_filter.c index 9d54b4017e50..8f7bc1ee7453 100644 --- a/net/ipv4/netfilter/iptable_filter.c +++ b/net/ipv4/netfilter/iptable_filter.c @@ -72,16 +72,24 @@ static int __net_init iptable_filter_net_init(struct net *net) return 0; } +static void __net_exit iptable_filter_net_pre_exit(struct net *net) +{ + if (net->ipv4.iptable_filter) + ipt_unregister_table_pre_exit(net, net->ipv4.iptable_filter, + filter_ops); +} + static void __net_exit iptable_filter_net_exit(struct net *net) { if (!net->ipv4.iptable_filter) return; - ipt_unregister_table(net, net->ipv4.iptable_filter, filter_ops); + ipt_unregister_table_exit(net, net->ipv4.iptable_filter); net->ipv4.iptable_filter = NULL; } static struct pernet_operations iptable_filter_net_ops = { .init = iptable_filter_net_init, + .pre_exit = iptable_filter_net_pre_exit, .exit = iptable_filter_net_exit, }; diff --git a/net/ipv4/netfilter/iptable_mangle.c b/net/ipv4/netfilter/iptable_mangle.c index bb9266ea3785..f703a717ab1d 100644 --- a/net/ipv4/netfilter/iptable_mangle.c +++ b/net/ipv4/netfilter/iptable_mangle.c @@ -100,15 +100,23 @@ static int __net_init iptable_mangle_table_init(struct net *net) return ret; } +static void __net_exit iptable_mangle_net_pre_exit(struct net *net) +{ + if (net->ipv4.iptable_mangle) + ipt_unregister_table_pre_exit(net, net->ipv4.iptable_mangle, + mangle_ops); +} + static void __net_exit iptable_mangle_net_exit(struct net *net) { if (!net->ipv4.iptable_mangle) return; - ipt_unregister_table(net, net->ipv4.iptable_mangle, mangle_ops); + ipt_unregister_table_exit(net, net->ipv4.iptable_mangle); net->ipv4.iptable_mangle = NULL; } static struct pernet_operations iptable_mangle_net_ops = { + .pre_exit = iptable_mangle_net_pre_exit, .exit = iptable_mangle_net_exit, }; diff --git a/net/ipv4/netfilter/iptable_nat.c b/net/ipv4/netfilter/iptable_nat.c index ad33687b7444..b0143b109f25 100644 --- a/net/ipv4/netfilter/iptable_nat.c +++ b/net/ipv4/netfilter/iptable_nat.c @@ -113,16 +113,22 @@ static int __net_init iptable_nat_table_init(struct net *net) return ret; } +static void __net_exit iptable_nat_net_pre_exit(struct net *net) +{ + if (net->ipv4.nat_table) + ipt_nat_unregister_lookups(net); +} + static void __net_exit iptable_nat_net_exit(struct net *net) { if (!net->ipv4.nat_table) return; - ipt_nat_unregister_lookups(net); - ipt_unregister_table(net, net->ipv4.nat_table, NULL); + ipt_unregister_table_exit(net, net->ipv4.nat_table); net->ipv4.nat_table = NULL; } static struct pernet_operations iptable_nat_net_ops = { + .pre_exit = iptable_nat_net_pre_exit, .exit = iptable_nat_net_exit, }; diff --git a/net/ipv4/netfilter/iptable_raw.c b/net/ipv4/netfilter/iptable_raw.c index 69697eb4bfc6..9abfe6bf2cb9 100644 --- a/net/ipv4/netfilter/iptable_raw.c +++ b/net/ipv4/netfilter/iptable_raw.c @@ -67,15 +67,23 @@ static int __net_init iptable_raw_table_init(struct net *net) return ret; } +static void __net_exit iptable_raw_net_pre_exit(struct net *net) +{ + if (net->ipv4.iptable_raw) + ipt_unregister_table_pre_exit(net, net->ipv4.iptable_raw, + rawtable_ops); +} + static void __net_exit iptable_raw_net_exit(struct net *net) { if (!net->ipv4.iptable_raw) return; - ipt_unregister_table(net, net->ipv4.iptable_raw, rawtable_ops); + ipt_unregister_table_exit(net, net->ipv4.iptable_raw); net->ipv4.iptable_raw = NULL; } static struct pernet_operations iptable_raw_net_ops = { + .pre_exit = iptable_raw_net_pre_exit, .exit = iptable_raw_net_exit, }; diff --git a/net/ipv4/netfilter/iptable_security.c b/net/ipv4/netfilter/iptable_security.c index ac633c1db97e..415c1975d770 100644 --- a/net/ipv4/netfilter/iptable_security.c +++ b/net/ipv4/netfilter/iptable_security.c @@ -62,16 +62,23 @@ static int __net_init iptable_security_table_init(struct net *net) return ret; } +static void __net_exit iptable_security_net_pre_exit(struct net *net) +{ + if (net->ipv4.iptable_security) + ipt_unregister_table_pre_exit(net, net->ipv4.iptable_security, + sectbl_ops); +} + static void __net_exit iptable_security_net_exit(struct net *net) { if (!net->ipv4.iptable_security) return; - - ipt_unregister_table(net, net->ipv4.iptable_security, sectbl_ops); + ipt_unregister_table_exit(net, net->ipv4.iptable_security); net->ipv4.iptable_security = NULL; } static struct pernet_operations iptable_security_net_ops = { + .pre_exit = iptable_security_net_pre_exit, .exit = iptable_security_net_exit, }; From 57ea5f18882a3d7cf6135fa8c949a37c89395837 Mon Sep 17 00:00:00 2001 From: David Wilder Date: Mon, 22 Jun 2020 10:10:13 -0700 Subject: [PATCH 467/618] netfilter: ip6tables: Split ip6t_unregister_table() into pre_exit and exit helpers. The pre_exit will un-register the underlying hook and .exit will do the table freeing. The netns core does an unconditional synchronize_rcu after the pre_exit hooks insuring no packets are in flight that have picked up the pointer before completing the un-register. Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default") Signed-off-by: David Wilder Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter_ipv6/ip6_tables.h | 3 +++ net/ipv6/netfilter/ip6_tables.c | 15 ++++++++++++++- 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h index 8225f7821a29..1547d5f9ae06 100644 --- a/include/linux/netfilter_ipv6/ip6_tables.h +++ b/include/linux/netfilter_ipv6/ip6_tables.h @@ -29,6 +29,9 @@ int ip6t_register_table(struct net *net, const struct xt_table *table, const struct nf_hook_ops *ops, struct xt_table **res); void ip6t_unregister_table(struct net *net, struct xt_table *table, const struct nf_hook_ops *ops); +void ip6t_unregister_table_pre_exit(struct net *net, struct xt_table *table, + const struct nf_hook_ops *ops); +void ip6t_unregister_table_exit(struct net *net, struct xt_table *table); extern unsigned int ip6t_do_table(struct sk_buff *skb, const struct nf_hook_state *state, struct xt_table *table); diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c index e27393498ecb..e96a431549bc 100644 --- a/net/ipv6/netfilter/ip6_tables.c +++ b/net/ipv6/netfilter/ip6_tables.c @@ -1807,11 +1807,22 @@ int ip6t_register_table(struct net *net, const struct xt_table *table, return ret; } +void ip6t_unregister_table_pre_exit(struct net *net, struct xt_table *table, + const struct nf_hook_ops *ops) +{ + nf_unregister_net_hooks(net, ops, hweight32(table->valid_hooks)); +} + +void ip6t_unregister_table_exit(struct net *net, struct xt_table *table) +{ + __ip6t_unregister_table(net, table); +} + void ip6t_unregister_table(struct net *net, struct xt_table *table, const struct nf_hook_ops *ops) { if (ops) - nf_unregister_net_hooks(net, ops, hweight32(table->valid_hooks)); + ip6t_unregister_table_pre_exit(net, table, ops); __ip6t_unregister_table(net, table); } @@ -1969,6 +1980,8 @@ static void __exit ip6_tables_fini(void) EXPORT_SYMBOL(ip6t_register_table); EXPORT_SYMBOL(ip6t_unregister_table); +EXPORT_SYMBOL(ip6t_unregister_table_pre_exit); +EXPORT_SYMBOL(ip6t_unregister_table_exit); EXPORT_SYMBOL(ip6t_do_table); module_init(ip6_tables_init); From 5f027bc74a9be2e53233de4ebcd2f90390b50a62 Mon Sep 17 00:00:00 2001 From: David Wilder Date: Mon, 22 Jun 2020 10:10:14 -0700 Subject: [PATCH 468/618] netfilter: ip6tables: Add a .pre_exit hook in all ip6table_foo.c. Using new helpers ip6t_unregister_table_pre_exit() and ip6t_unregister_table_exit(). Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default") Signed-off-by: David Wilder Signed-off-by: Pablo Neira Ayuso --- net/ipv6/netfilter/ip6table_filter.c | 10 +++++++++- net/ipv6/netfilter/ip6table_mangle.c | 10 +++++++++- net/ipv6/netfilter/ip6table_nat.c | 10 ++++++++-- net/ipv6/netfilter/ip6table_raw.c | 10 +++++++++- net/ipv6/netfilter/ip6table_security.c | 10 +++++++++- 5 files changed, 44 insertions(+), 6 deletions(-) diff --git a/net/ipv6/netfilter/ip6table_filter.c b/net/ipv6/netfilter/ip6table_filter.c index 32667f5d5a33..88337b51ffbf 100644 --- a/net/ipv6/netfilter/ip6table_filter.c +++ b/net/ipv6/netfilter/ip6table_filter.c @@ -73,16 +73,24 @@ static int __net_init ip6table_filter_net_init(struct net *net) return 0; } +static void __net_exit ip6table_filter_net_pre_exit(struct net *net) +{ + if (net->ipv6.ip6table_filter) + ip6t_unregister_table_pre_exit(net, net->ipv6.ip6table_filter, + filter_ops); +} + static void __net_exit ip6table_filter_net_exit(struct net *net) { if (!net->ipv6.ip6table_filter) return; - ip6t_unregister_table(net, net->ipv6.ip6table_filter, filter_ops); + ip6t_unregister_table_exit(net, net->ipv6.ip6table_filter); net->ipv6.ip6table_filter = NULL; } static struct pernet_operations ip6table_filter_net_ops = { .init = ip6table_filter_net_init, + .pre_exit = ip6table_filter_net_pre_exit, .exit = ip6table_filter_net_exit, }; diff --git a/net/ipv6/netfilter/ip6table_mangle.c b/net/ipv6/netfilter/ip6table_mangle.c index 070afb97fa2b..1a2748611e00 100644 --- a/net/ipv6/netfilter/ip6table_mangle.c +++ b/net/ipv6/netfilter/ip6table_mangle.c @@ -93,16 +93,24 @@ static int __net_init ip6table_mangle_table_init(struct net *net) return ret; } +static void __net_exit ip6table_mangle_net_pre_exit(struct net *net) +{ + if (net->ipv6.ip6table_mangle) + ip6t_unregister_table_pre_exit(net, net->ipv6.ip6table_mangle, + mangle_ops); +} + static void __net_exit ip6table_mangle_net_exit(struct net *net) { if (!net->ipv6.ip6table_mangle) return; - ip6t_unregister_table(net, net->ipv6.ip6table_mangle, mangle_ops); + ip6t_unregister_table_exit(net, net->ipv6.ip6table_mangle); net->ipv6.ip6table_mangle = NULL; } static struct pernet_operations ip6table_mangle_net_ops = { + .pre_exit = ip6table_mangle_net_pre_exit, .exit = ip6table_mangle_net_exit, }; diff --git a/net/ipv6/netfilter/ip6table_nat.c b/net/ipv6/netfilter/ip6table_nat.c index 0f4875952efc..0a23265e3caa 100644 --- a/net/ipv6/netfilter/ip6table_nat.c +++ b/net/ipv6/netfilter/ip6table_nat.c @@ -114,16 +114,22 @@ static int __net_init ip6table_nat_table_init(struct net *net) return ret; } +static void __net_exit ip6table_nat_net_pre_exit(struct net *net) +{ + if (net->ipv6.ip6table_nat) + ip6t_nat_unregister_lookups(net); +} + static void __net_exit ip6table_nat_net_exit(struct net *net) { if (!net->ipv6.ip6table_nat) return; - ip6t_nat_unregister_lookups(net); - ip6t_unregister_table(net, net->ipv6.ip6table_nat, NULL); + ip6t_unregister_table_exit(net, net->ipv6.ip6table_nat); net->ipv6.ip6table_nat = NULL; } static struct pernet_operations ip6table_nat_net_ops = { + .pre_exit = ip6table_nat_net_pre_exit, .exit = ip6table_nat_net_exit, }; diff --git a/net/ipv6/netfilter/ip6table_raw.c b/net/ipv6/netfilter/ip6table_raw.c index a22100b1cf2c..8f9e742226f7 100644 --- a/net/ipv6/netfilter/ip6table_raw.c +++ b/net/ipv6/netfilter/ip6table_raw.c @@ -66,15 +66,23 @@ static int __net_init ip6table_raw_table_init(struct net *net) return ret; } +static void __net_exit ip6table_raw_net_pre_exit(struct net *net) +{ + if (net->ipv6.ip6table_raw) + ip6t_unregister_table_pre_exit(net, net->ipv6.ip6table_raw, + rawtable_ops); +} + static void __net_exit ip6table_raw_net_exit(struct net *net) { if (!net->ipv6.ip6table_raw) return; - ip6t_unregister_table(net, net->ipv6.ip6table_raw, rawtable_ops); + ip6t_unregister_table_exit(net, net->ipv6.ip6table_raw); net->ipv6.ip6table_raw = NULL; } static struct pernet_operations ip6table_raw_net_ops = { + .pre_exit = ip6table_raw_net_pre_exit, .exit = ip6table_raw_net_exit, }; diff --git a/net/ipv6/netfilter/ip6table_security.c b/net/ipv6/netfilter/ip6table_security.c index a74335fe2bd9..5e8c48fed032 100644 --- a/net/ipv6/netfilter/ip6table_security.c +++ b/net/ipv6/netfilter/ip6table_security.c @@ -61,15 +61,23 @@ static int __net_init ip6table_security_table_init(struct net *net) return ret; } +static void __net_exit ip6table_security_net_pre_exit(struct net *net) +{ + if (net->ipv6.ip6table_security) + ip6t_unregister_table_pre_exit(net, net->ipv6.ip6table_security, + sectbl_ops); +} + static void __net_exit ip6table_security_net_exit(struct net *net) { if (!net->ipv6.ip6table_security) return; - ip6t_unregister_table(net, net->ipv6.ip6table_security, sectbl_ops); + ip6t_unregister_table_exit(net, net->ipv6.ip6table_security); net->ipv6.ip6table_security = NULL; } static struct pernet_operations ip6table_security_net_ops = { + .pre_exit = ip6table_security_net_pre_exit, .exit = ip6table_security_net_exit, }; From 619ae8e0697a6fb85b99b19137590c7c337c579e Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Mon, 22 Jun 2020 10:28:32 +0200 Subject: [PATCH 469/618] selftests: netfilter: add test case for conntrack helper assignment check that 'nft ... ct helper set ' works: 1. configure ftp helper via nft and assign it to connections on port 2121 2. check with 'conntrack -L' that the next connection has the ftp helper attached to it. Also add a test for auto-assign (old behaviour). Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- tools/testing/selftests/netfilter/Makefile | 2 +- .../netfilter/nft_conntrack_helper.sh | 175 ++++++++++++++++++ 2 files changed, 176 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/netfilter/nft_conntrack_helper.sh diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile index 9c0f758310fe..a179f0dca8ce 100644 --- a/tools/testing/selftests/netfilter/Makefile +++ b/tools/testing/selftests/netfilter/Makefile @@ -3,7 +3,7 @@ TEST_PROGS := nft_trans_stress.sh nft_nat.sh bridge_brouter.sh \ conntrack_icmp_related.sh nft_flowtable.sh ipvs.sh \ - nft_concat_range.sh \ + nft_concat_range.sh nft_conntrack_helper.sh \ nft_queue.sh LDLIBS = -lmnl diff --git a/tools/testing/selftests/netfilter/nft_conntrack_helper.sh b/tools/testing/selftests/netfilter/nft_conntrack_helper.sh new file mode 100755 index 000000000000..edf0a48da6bf --- /dev/null +++ b/tools/testing/selftests/netfilter/nft_conntrack_helper.sh @@ -0,0 +1,175 @@ +#!/bin/bash +# +# This tests connection tracking helper assignment: +# 1. can attach ftp helper to a connection from nft ruleset. +# 2. auto-assign still works. +# +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +ret=0 + +sfx=$(mktemp -u "XXXXXXXX") +ns1="ns1-$sfx" +ns2="ns2-$sfx" +testipv6=1 + +cleanup() +{ + ip netns del ${ns1} + ip netns del ${ns2} +} + +nft --version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +conntrack -V > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without conntrack tool" + exit $ksft_skip +fi + +which nc >/dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without netcat tool" + exit $ksft_skip +fi + +trap cleanup EXIT + +ip netns add ${ns1} +ip netns add ${ns2} + +ip link add veth0 netns ${ns1} type veth peer name veth0 netns ${ns2} > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: No virtual ethernet pair device support in kernel" + exit $ksft_skip +fi + +ip -net ${ns1} link set lo up +ip -net ${ns1} link set veth0 up + +ip -net ${ns2} link set lo up +ip -net ${ns2} link set veth0 up + +ip -net ${ns1} addr add 10.0.1.1/24 dev veth0 +ip -net ${ns1} addr add dead:1::1/64 dev veth0 + +ip -net ${ns2} addr add 10.0.1.2/24 dev veth0 +ip -net ${ns2} addr add dead:1::2/64 dev veth0 + +load_ruleset_family() { + local family=$1 + local ns=$2 + +ip netns exec ${ns} nft -f - < /dev/null |grep -q 'helper=ftp' + if [ $? -ne 0 ] ; then + echo "FAIL: ${netns} did not show attached helper $message" 1>&2 + ret=1 + fi + + echo "PASS: ${netns} connection on port $port has ftp helper attached" 1>&2 + return 0 +} + +test_helper() +{ + local port=$1 + local msg=$2 + + sleep 3 | ip netns exec ${ns2} nc -w 2 -l -p $port > /dev/null & + + sleep 1 + sleep 1 | ip netns exec ${ns1} nc -w 2 10.0.1.2 $port > /dev/null & + + check_for_helper "$ns1" "ip $msg" $port + check_for_helper "$ns2" "ip $msg" $port + + wait + + if [ $testipv6 -eq 0 ] ;then + return 0 + fi + + ip netns exec ${ns1} conntrack -F 2> /dev/null + ip netns exec ${ns2} conntrack -F 2> /dev/null + + sleep 3 | ip netns exec ${ns2} nc -w 2 -6 -l -p $port > /dev/null & + + sleep 1 + sleep 1 | ip netns exec ${ns1} nc -w 2 -6 dead:1::2 $port > /dev/null & + + check_for_helper "$ns1" "ipv6 $msg" $port + check_for_helper "$ns2" "ipv6 $msg" $port + + wait +} + +load_ruleset_family ip ${ns1} +if [ $? -ne 0 ];then + echo "FAIL: ${ns1} cannot load ip ruleset" 1>&2 + exit 1 +fi + +load_ruleset_family ip6 ${ns1} +if [ $? -ne 0 ];then + echo "SKIP: ${ns1} cannot load ip6 ruleset" 1>&2 + testipv6=0 +fi + +load_ruleset_family inet ${ns2} +if [ $? -ne 0 ];then + echo "SKIP: ${ns1} cannot load inet ruleset" 1>&2 + load_ruleset_family ip ${ns2} + if [ $? -ne 0 ];then + echo "FAIL: ${ns2} cannot load ip ruleset" 1>&2 + exit 1 + fi + + if [ $testipv6 -eq 1 ] ;then + load_ruleset_family ip6 ${ns2} + if [ $? -ne 0 ];then + echo "FAIL: ${ns2} cannot load ip6 ruleset" 1>&2 + exit 1 + fi + fi +fi + +test_helper 2121 "set via ruleset" +ip netns exec ${ns1} sysctl -q 'net.netfilter.nf_conntrack_helper=1' +ip netns exec ${ns2} sysctl -q 'net.netfilter.nf_conntrack_helper=1' +test_helper 21 "auto-assign" + +exit $ret From 20c59ce010f84300f6c655d32db2610d3433f85c Mon Sep 17 00:00:00 2001 From: Maurizio Drocco Date: Tue, 23 Jun 2020 11:57:32 -0400 Subject: [PATCH 470/618] ima: extend boot_aggregate with kernel measurements Registers 8-9 are used to store measurements of the kernel and its command line (e.g., grub2 bootloader with tpm module enabled). IMA should include them in the boot aggregate. Registers 8-9 should be only included in non-SHA1 digests to avoid ambiguity. Signed-off-by: Maurizio Drocco Reviewed-by: Bruno Meneguele Tested-by: Bruno Meneguele (TPM 1.2, TPM 2.0) Signed-off-by: Mimi Zohar --- security/integrity/ima/ima.h | 2 +- security/integrity/ima/ima_crypto.c | 15 ++++++++++++++- 2 files changed, 15 insertions(+), 2 deletions(-) diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h index df93ac258e01..9d94080bdad8 100644 --- a/security/integrity/ima/ima.h +++ b/security/integrity/ima/ima.h @@ -30,7 +30,7 @@ enum ima_show_type { IMA_SHOW_BINARY, IMA_SHOW_BINARY_NO_FIELD_LEN, IMA_SHOW_BINARY_OLD_STRING_FMT, IMA_SHOW_ASCII }; -enum tpm_pcrs { TPM_PCR0 = 0, TPM_PCR8 = 8 }; +enum tpm_pcrs { TPM_PCR0 = 0, TPM_PCR8 = 8, TPM_PCR10 = 10 }; /* digest size for IMA, fits SHA1 or MD5 */ #define IMA_DIGEST_SIZE SHA1_DIGEST_SIZE diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c index 220b14920c37..011c3c76af86 100644 --- a/security/integrity/ima/ima_crypto.c +++ b/security/integrity/ima/ima_crypto.c @@ -823,13 +823,26 @@ static int ima_calc_boot_aggregate_tfm(char *digest, u16 alg_id, if (rc != 0) return rc; - /* cumulative sha1 over tpm registers 0-7 */ + /* cumulative digest over TPM registers 0-7 */ for (i = TPM_PCR0; i < TPM_PCR8; i++) { ima_pcrread(i, &d); /* now accumulate with current aggregate */ rc = crypto_shash_update(shash, d.digest, crypto_shash_digestsize(tfm)); } + /* + * Extend cumulative digest over TPM registers 8-9, which contain + * measurement for the kernel command line (reg. 8) and image (reg. 9) + * in a typical PCR allocation. Registers 8-9 are only included in + * non-SHA1 boot_aggregate digests to avoid ambiguity. + */ + if (alg_id != TPM_ALG_SHA1) { + for (i = TPM_PCR8; i < TPM_PCR10; i++) { + ima_pcrread(i, &d); + rc = crypto_shash_update(shash, d.digest, + crypto_shash_digestsize(tfm)); + } + } if (!rc) crypto_shash_final(shash, digest); return rc; From 673bafd5b8b0ec9b1e2eedca2a2be6b44ee5ba9c Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Wed, 24 Jun 2020 18:14:53 -0700 Subject: [PATCH 471/618] net: bcmgenet: re-remove bcmgenet_hfb_add_filter This function was originally removed by Baoyou Xie in commit e2072600a241 ("net: bcmgenet: remove unused function in bcmgenet.c") to prevent a build warning. Some of the functions removed by Baoyou Xie are now used for WAKE_FILTER support so his commit was reverted, but this function is still unused and the kbuild test robot dutifully reported the warning. This commit once again removes the remaining unused hfb functions. Fixes: 14da1510fedc ("Revert "net: bcmgenet: remove unused function in bcmgenet.c"") Reported-by: kbuild test robot Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/genet/bcmgenet.c | 77 ------------------- 1 file changed, 77 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index ff31da0ed846..f1fa11665319 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -459,17 +459,6 @@ static inline void bcmgenet_rdma_ring_writel(struct bcmgenet_priv *priv, genet_dma_ring_regs[r]); } -static bool bcmgenet_hfb_is_filter_enabled(struct bcmgenet_priv *priv, - u32 f_index) -{ - u32 offset; - u32 reg; - - offset = HFB_FLT_ENABLE_V3PLUS + (f_index < 32) * sizeof(u32); - reg = bcmgenet_hfb_reg_readl(priv, offset); - return !!(reg & (1 << (f_index % 32))); -} - static void bcmgenet_hfb_enable_filter(struct bcmgenet_priv *priv, u32 f_index) { u32 offset; @@ -533,19 +522,6 @@ static void bcmgenet_hfb_set_filter_length(struct bcmgenet_priv *priv, bcmgenet_hfb_reg_writel(priv, reg, offset); } -static int bcmgenet_hfb_find_unused_filter(struct bcmgenet_priv *priv) -{ - u32 f_index; - - /* First MAX_NUM_OF_FS_RULES are reserved for Rx NFC filters */ - for (f_index = MAX_NUM_OF_FS_RULES; - f_index < priv->hw_params->hfb_filter_cnt; f_index++) - if (!bcmgenet_hfb_is_filter_enabled(priv, f_index)) - return f_index; - - return -ENOMEM; -} - static int bcmgenet_hfb_validate_mask(void *mask, size_t size) { while (size) { @@ -744,59 +720,6 @@ static int bcmgenet_hfb_create_rxnfc_filter(struct bcmgenet_priv *priv, return err; } -/* bcmgenet_hfb_add_filter - * - * Add new filter to Hardware Filter Block to match and direct Rx traffic to - * desired Rx queue. - * - * f_data is an array of unsigned 32-bit integers where each 32-bit integer - * provides filter data for 2 bytes (4 nibbles) of Rx frame: - * - * bits 31:20 - unused - * bit 19 - nibble 0 match enable - * bit 18 - nibble 1 match enable - * bit 17 - nibble 2 match enable - * bit 16 - nibble 3 match enable - * bits 15:12 - nibble 0 data - * bits 11:8 - nibble 1 data - * bits 7:4 - nibble 2 data - * bits 3:0 - nibble 3 data - * - * Example: - * In order to match: - * - Ethernet frame type = 0x0800 (IP) - * - IP version field = 4 - * - IP protocol field = 0x11 (UDP) - * - * The following filter is needed: - * u32 hfb_filter_ipv4_udp[] = { - * Rx frame offset 0x00: 0x00000000, 0x00000000, 0x00000000, 0x00000000, - * Rx frame offset 0x08: 0x00000000, 0x00000000, 0x000F0800, 0x00084000, - * Rx frame offset 0x10: 0x00000000, 0x00000000, 0x00000000, 0x00030011, - * }; - * - * To add the filter to HFB and direct the traffic to Rx queue 0, call: - * bcmgenet_hfb_add_filter(priv, hfb_filter_ipv4_udp, - * ARRAY_SIZE(hfb_filter_ipv4_udp), 0); - */ -int bcmgenet_hfb_add_filter(struct bcmgenet_priv *priv, u32 *f_data, - u32 f_length, u32 rx_queue) -{ - int f_index; - - f_index = bcmgenet_hfb_find_unused_filter(priv); - if (f_index < 0) - return -ENOMEM; - - if (f_length > priv->hw_params->hfb_filter_size) - return -EINVAL; - - bcmgenet_hfb_set_filter(priv, f_data, f_length, rx_queue, f_index); - bcmgenet_hfb_enable_filter(priv, f_index); - - return 0; -} - /* bcmgenet_hfb_clear * * Clear Hardware Filter Block and disable all filtering. From d966d2efb643a8ba925e910bfc10e19c8b018de7 Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Wed, 24 Jun 2020 18:14:54 -0700 Subject: [PATCH 472/618] net: bcmgenet: use __be16 for htons(ETH_P_IP) The 16-bit value that holds a short in network byte order should be declared as a restricted big endian type to allow type checks to succeed during assignment. Fixes: 3e370952287c ("net: bcmgenet: add support for ethtool rxnfc flows") Reported-by: kbuild test robot Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index f1fa11665319..c63f01e2bb03 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -610,8 +610,9 @@ static int bcmgenet_hfb_create_rxnfc_filter(struct bcmgenet_priv *priv, { struct ethtool_rx_flow_spec *fs = &rule->fs; int err = 0, offset = 0, f_length = 0; - u16 val_16, mask_16; u8 val_8, mask_8; + __be16 val_16; + u16 mask_16; size_t size; u32 *f_data; From 20d1f2d1b024f6be199a3bedf1578a1d21592bc5 Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Wed, 24 Jun 2020 18:14:55 -0700 Subject: [PATCH 473/618] net: bcmgenet: use hardware padding of runt frames When commit 474ea9cafc45 ("net: bcmgenet: correctly pad short packets") added the call to skb_padto() it should have been located before the nr_frags parameter was read since that value could be changed when padding packets with lengths between 55 and 59 bytes (inclusive). The use of a stale nr_frags value can cause corruption of the pad data when tx-scatter-gather is enabled. This corruption of the pad can cause invalid checksum computation when hardware offload of tx-checksum is also enabled. Since the original reason for the padding was corrected by commit 7dd399130efb ("net: bcmgenet: fix skb_len in bcmgenet_xmit_single()") we can remove the software padding all together and make use of hardware padding of short frames as long as the hardware also always appends the FCS value to the frame. Fixes: 474ea9cafc45 ("net: bcmgenet: correctly pad short packets") Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index c63f01e2bb03..af924a8b885f 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2042,11 +2042,6 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev) goto out; } - if (skb_padto(skb, ETH_ZLEN)) { - ret = NETDEV_TX_OK; - goto out; - } - /* Retain how many bytes will be sent on the wire, without TSB inserted * by transmit checksum offload */ @@ -2093,6 +2088,9 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev) len_stat = (size << DMA_BUFLENGTH_SHIFT) | (priv->hw_params->qtag_mask << DMA_TX_QTAG_SHIFT); + /* Note: if we ever change from DMA_TX_APPEND_CRC below we + * will need to restore software padding of "runt" packets + */ if (!i) { len_stat |= DMA_TX_APPEND_CRC | DMA_SOP; if (skb->ip_summed == CHECKSUM_PARTIAL) From 9d71b344f86f4264a5fae43c997a630e93c0de9b Mon Sep 17 00:00:00 2001 From: Sumit Garg Date: Thu, 4 Jun 2020 15:31:16 +0530 Subject: [PATCH 474/618] kdb: Re-factor kdb_printf() message write code Re-factor kdb_printf() message write code in order to avoid duplication of code and thereby increase readability. Signed-off-by: Sumit Garg Reviewed-by: Douglas Anderson Reviewed-by: Petr Mladek Link: https://lore.kernel.org/r/1591264879-25920-2-git-send-email-sumit.garg@linaro.org Signed-off-by: Daniel Thompson --- kernel/debug/kdb/kdb_io.c | 57 +++++++++++++++++++-------------------- 1 file changed, 28 insertions(+), 29 deletions(-) diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c index 924bc9298a42..2d42a02de40e 100644 --- a/kernel/debug/kdb/kdb_io.c +++ b/kernel/debug/kdb/kdb_io.c @@ -542,6 +542,29 @@ static int kdb_search_string(char *searched, char *searchfor) return 0; } +static void kdb_msg_write(const char *msg, int msg_len) +{ + struct console *c; + + if (msg_len == 0) + return; + + if (dbg_io_ops && !dbg_io_ops->is_console) { + const char *cp = msg; + int len = msg_len; + + while (len--) { + dbg_io_ops->write_char(*cp); + cp++; + } + } + + for_each_console(c) { + c->write(c, msg, msg_len); + touch_nmi_watchdog(); + } +} + int vkdb_printf(enum kdb_msgsrc src, const char *fmt, va_list ap) { int diag; @@ -553,7 +576,6 @@ int vkdb_printf(enum kdb_msgsrc src, const char *fmt, va_list ap) int this_cpu, old_cpu; char *cp, *cp2, *cphold = NULL, replaced_byte = ' '; char *moreprompt = "more> "; - struct console *c; unsigned long uninitialized_var(flags); /* Serialize kdb_printf if multiple cpus try to write at once. @@ -687,22 +709,11 @@ int vkdb_printf(enum kdb_msgsrc src, const char *fmt, va_list ap) */ retlen = strlen(kdb_buffer); cp = (char *) printk_skip_headers(kdb_buffer); - if (!dbg_kdb_mode && kgdb_connected) { + if (!dbg_kdb_mode && kgdb_connected) gdbstub_msg_write(cp, retlen - (cp - kdb_buffer)); - } else { - if (dbg_io_ops && !dbg_io_ops->is_console) { - len = retlen - (cp - kdb_buffer); - cp2 = cp; - while (len--) { - dbg_io_ops->write_char(*cp2); - cp2++; - } - } - for_each_console(c) { - c->write(c, cp, retlen - (cp - kdb_buffer)); - touch_nmi_watchdog(); - } - } + else + kdb_msg_write(cp, retlen - (cp - kdb_buffer)); + if (logging) { saved_loglevel = console_loglevel; console_loglevel = CONSOLE_LOGLEVEL_SILENT; @@ -751,19 +762,7 @@ int vkdb_printf(enum kdb_msgsrc src, const char *fmt, va_list ap) moreprompt = "more> "; kdb_input_flush(); - - if (dbg_io_ops && !dbg_io_ops->is_console) { - len = strlen(moreprompt); - cp = moreprompt; - while (len--) { - dbg_io_ops->write_char(*cp); - cp++; - } - } - for_each_console(c) { - c->write(c, moreprompt, strlen(moreprompt)); - touch_nmi_watchdog(); - } + kdb_msg_write(moreprompt, strlen(moreprompt)); if (logging) printk("%s", moreprompt); From e8857288bb620d594c94a219148d18562e52b06e Mon Sep 17 00:00:00 2001 From: Sumit Garg Date: Thu, 4 Jun 2020 15:31:17 +0530 Subject: [PATCH 475/618] kdb: Check status of console prior to invoking handlers Check if a console is enabled prior to invoking corresponding write handler. Suggested-by: Sergey Senozhatsky Signed-off-by: Sumit Garg Reviewed-by: Daniel Thompson Reviewed-by: Douglas Anderson Reviewed-by: Petr Mladek Link: https://lore.kernel.org/r/1591264879-25920-3-git-send-email-sumit.garg@linaro.org Signed-off-by: Daniel Thompson --- kernel/debug/kdb/kdb_io.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c index 2d42a02de40e..58b7d256d0a4 100644 --- a/kernel/debug/kdb/kdb_io.c +++ b/kernel/debug/kdb/kdb_io.c @@ -560,6 +560,8 @@ static void kdb_msg_write(const char *msg, int msg_len) } for_each_console(c) { + if (!(c->flags & CON_ENABLED)) + continue; c->write(c, msg, msg_len); touch_nmi_watchdog(); } From 2a78b85b70f9c3d450619d369d349ba861320510 Mon Sep 17 00:00:00 2001 From: Sumit Garg Date: Thu, 4 Jun 2020 15:31:18 +0530 Subject: [PATCH 476/618] kdb: Make kdb_printf() console handling more robust While rounding up CPUs via NMIs, its possible that a rounded up CPU maybe holding a console port lock leading to kgdb master CPU stuck in a deadlock during invocation of console write operations. A similar deadlock could also be possible while using synchronous breakpoints. So in order to avoid such a deadlock, set oops_in_progress to encourage the console drivers to disregard their internal spin locks: in the current calling context the risk of deadlock is a bigger problem than risks due to re-entering the console driver. We operate directly on oops_in_progress rather than using bust_spinlocks() because the calls bust_spinlocks() makes on exit are not appropriate for this calling context. Suggested-by: Sergey Senozhatsky Signed-off-by: Sumit Garg Reviewed-by: Douglas Anderson Reviewed-by: Petr Mladek Link: https://lore.kernel.org/r/1591264879-25920-4-git-send-email-sumit.garg@linaro.org Signed-off-by: Daniel Thompson --- kernel/debug/kdb/kdb_io.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c index 58b7d256d0a4..0e4f2eda96d8 100644 --- a/kernel/debug/kdb/kdb_io.c +++ b/kernel/debug/kdb/kdb_io.c @@ -562,7 +562,18 @@ static void kdb_msg_write(const char *msg, int msg_len) for_each_console(c) { if (!(c->flags & CON_ENABLED)) continue; + /* + * Set oops_in_progress to encourage the console drivers to + * disregard their internal spin locks: in the current calling + * context the risk of deadlock is a bigger problem than risks + * due to re-entering the console driver. We operate directly on + * oops_in_progress rather than using bust_spinlocks() because + * the calls bust_spinlocks() makes on exit are not appropriate + * for this calling context. + */ + ++oops_in_progress; c->write(c, msg, msg_len); + --oops_in_progress; touch_nmi_watchdog(); } } From acf7b0bf7dcf5a96d9b44a0997227c7210d995c1 Mon Sep 17 00:00:00 2001 From: Marco Elver Date: Tue, 23 Jun 2020 13:24:48 +0200 Subject: [PATCH 477/618] kasan: Fix required compiler version The first working GCC version to satisfy CC_HAS_WORKING_NOSANITIZE_ADDRESS is GCC 8.3.0. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=89124 Reported-by: Stephen Rothwell Signed-off-by: Marco Elver Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20200623112448.GA208112@elver.google.com --- lib/Kconfig.kasan | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/Kconfig.kasan b/lib/Kconfig.kasan index af0dd09f91e9..34b84bcbd3d9 100644 --- a/lib/Kconfig.kasan +++ b/lib/Kconfig.kasan @@ -16,7 +16,7 @@ config CC_HAS_KASAN_SW_TAGS def_bool $(cc-option, -fsanitize=kernel-hwaddress) config CC_HAS_WORKING_NOSANITIZE_ADDRESS - def_bool !CC_IS_GCC || GCC_VERSION >= 80000 + def_bool !CC_IS_GCC || GCC_VERSION >= 80300 config KASAN bool "KASAN: runtime memory debugger" From 734d099ba644f5a92c70efa3d54d0ba2500ce162 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 17 Jun 2020 18:22:31 +0200 Subject: [PATCH 478/618] objtool: Don't consider vmlinux a C-file Avoids issuing C-file warnings for vmlinux. Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20200618144801.701257527@infradead.org --- tools/objtool/check.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/objtool/check.c b/tools/objtool/check.c index 3e214f879ada..d8eaa7dc53d5 100644 --- a/tools/objtool/check.c +++ b/tools/objtool/check.c @@ -2772,7 +2772,7 @@ int check(const char *_objname, bool orc) INIT_LIST_HEAD(&file.insn_list); hash_init(file.insn_hash); - file.c_file = find_section_by_name(file.elf, ".comment"); + file.c_file = !vmlinux && find_section_by_name(file.elf, ".comment"); file.ignore_unreachables = no_unreachable; file.hints = false; From e3a9e681adb779b39565a28b3252c3be1033f994 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 17 Jun 2020 18:21:16 +0200 Subject: [PATCH 479/618] x86/entry: Fixup bad_iret vs noinstr vmlinux.o: warning: objtool: fixup_bad_iret()+0x8e: call to memcpy() leaves .noinstr.text section Worse, when KASAN there is no telling what memcpy() actually is. Force the use of __memcpy() which is our assmebly implementation. Reported-by: Marco Elver Suggested-by: Marco Elver Signed-off-by: Peter Zijlstra (Intel) Tested-by: Marco Elver Link: https://lkml.kernel.org/r/20200618144801.760070502@infradead.org --- arch/x86/kernel/traps.c | 6 +++--- arch/x86/lib/memcpy_64.S | 4 ++++ 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index af75109485c2..a7d157090572 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -690,13 +690,13 @@ struct bad_iret_stack *fixup_bad_iret(struct bad_iret_stack *s) (struct bad_iret_stack *)__this_cpu_read(cpu_tss_rw.x86_tss.sp0) - 1; /* Copy the IRET target to the temporary storage. */ - memcpy(&tmp.regs.ip, (void *)s->regs.sp, 5*8); + __memcpy(&tmp.regs.ip, (void *)s->regs.sp, 5*8); /* Copy the remainder of the stack from the current stack. */ - memcpy(&tmp, s, offsetof(struct bad_iret_stack, regs.ip)); + __memcpy(&tmp, s, offsetof(struct bad_iret_stack, regs.ip)); /* Update the entry stack */ - memcpy(new_stack, &tmp, sizeof(tmp)); + __memcpy(new_stack, &tmp, sizeof(tmp)); BUG_ON(!user_mode(&new_stack->regs)); return new_stack; diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S index 56b243b14c3a..bbcc05bcefad 100644 --- a/arch/x86/lib/memcpy_64.S +++ b/arch/x86/lib/memcpy_64.S @@ -8,6 +8,8 @@ #include #include +.pushsection .noinstr.text, "ax" + /* * We build a jump to memcpy_orig by default which gets NOPped out on * the majority of x86 CPUs which set REP_GOOD. In addition, CPUs which @@ -184,6 +186,8 @@ SYM_FUNC_START_LOCAL(memcpy_orig) retq SYM_FUNC_END(memcpy_orig) +.popsection + #ifndef CONFIG_UML MCSAFE_TEST_CTL From c7aadc09321d8f9a1d3bd1e6d8a47222ecddf6c5 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 17 Jun 2020 18:25:57 +0200 Subject: [PATCH 480/618] x86/entry: Increase entry_stack size to a full page Marco crashed in bad_iret with a Clang11/KCSAN build due to overflowing the stack. Now that we run C code on it, expand it to a full page. Suggested-by: Andy Lutomirski Reported-by: Marco Elver Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Lai Jiangshan Tested-by: Marco Elver Link: https://lkml.kernel.org/r/20200618144801.819246178@infradead.org --- arch/x86/include/asm/processor.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 42cd333616c4..03b7c4ca425a 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -370,7 +370,7 @@ struct x86_hw_tss { #define IO_BITMAP_OFFSET_INVALID (__KERNEL_TSS_LIMIT + 1) struct entry_stack { - unsigned long words[64]; + char stack[PAGE_SIZE]; }; struct entry_stack_page { From 145a773aef83181d47ebab21bb33c89233aadb1e Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 16 Jun 2020 13:28:36 +0200 Subject: [PATCH 481/618] x86/entry: Fix #UD vs WARN more vmlinux.o: warning: objtool: exc_invalid_op()+0x47: call to probe_kernel_read() leaves .noinstr.text section Since we use UD2 as a short-cut for 'CALL __WARN', treat it as such. Have the bare exception handler do the report_bug() thing. Fixes: 15a416e8aaa7 ("x86/entry: Treat BUG/WARN as NMI-like entries") Signed-off-by: Peter Zijlstra (Intel) Acked-by: Andy Lutomirski Link: https://lkml.kernel.org/r/20200622114713.GE577403@hirez.programming.kicks-ass.net --- arch/x86/kernel/traps.c | 74 ++++++++++++++++++++++------------------- 1 file changed, 39 insertions(+), 35 deletions(-) diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index a7d157090572..1d9ea2101b97 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -84,17 +84,16 @@ static inline void cond_local_irq_disable(struct pt_regs *regs) local_irq_disable(); } -int is_valid_bugaddr(unsigned long addr) +__always_inline int is_valid_bugaddr(unsigned long addr) { - unsigned short ud; - if (addr < TASK_SIZE_MAX) return 0; - if (probe_kernel_address((unsigned short *)addr, ud)) - return 0; - - return ud == INSN_UD0 || ud == INSN_UD2; + /* + * We got #UD, if the text isn't readable we'd have gotten + * a different exception. + */ + return *(unsigned short *)addr == INSN_UD2; } static nokprobe_inline int @@ -216,40 +215,45 @@ static inline void handle_invalid_op(struct pt_regs *regs) ILL_ILLOPN, error_get_trap_addr(regs)); } +static noinstr bool handle_bug(struct pt_regs *regs) +{ + bool handled = false; + + if (!is_valid_bugaddr(regs->ip)) + return handled; + + /* + * All lies, just get the WARN/BUG out. + */ + instrumentation_begin(); + /* + * Since we're emulating a CALL with exceptions, restore the interrupt + * state to what it was at the exception site. + */ + if (regs->flags & X86_EFLAGS_IF) + raw_local_irq_enable(); + if (report_bug(regs->ip, regs) == BUG_TRAP_TYPE_WARN) { + regs->ip += LEN_UD2; + handled = true; + } + if (regs->flags & X86_EFLAGS_IF) + raw_local_irq_disable(); + instrumentation_end(); + + return handled; +} + DEFINE_IDTENTRY_RAW(exc_invalid_op) { bool rcu_exit; /* - * Handle BUG/WARN like NMIs instead of like normal idtentries: - * if we bugged/warned in a bad RCU context, for example, the last - * thing we want is to BUG/WARN again in the idtentry code, ad - * infinitum. + * We use UD2 as a short encoding for 'CALL __WARN', as such + * handle it before exception entry to avoid recursive WARN + * in case exception entry is the one triggering WARNs. */ - if (!user_mode(regs) && is_valid_bugaddr(regs->ip)) { - enum bug_trap_type type; - - nmi_enter(); - instrumentation_begin(); - trace_hardirqs_off_finish(); - type = report_bug(regs->ip, regs); - if (regs->flags & X86_EFLAGS_IF) - trace_hardirqs_on_prepare(); - instrumentation_end(); - nmi_exit(); - - if (type == BUG_TRAP_TYPE_WARN) { - /* Skip the ud2. */ - regs->ip += LEN_UD2; - return; - } - - /* - * Else, if this was a BUG and report_bug returns or if this - * was just a normal #UD, we want to continue onward and - * crash. - */ - } + if (!user_mode(regs) && handle_bug(regs)) + return; rcu_exit = idtentry_enter_cond_rcu(regs); instrumentation_begin(); From 10e8b11eb3195e11450c509d4dd3984d707a4167 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 25 Jun 2020 13:52:53 +0200 Subject: [PATCH 482/618] cpuidle: Rearrange s2idle-specific idle state entry code Implement call_cpuidle_s2idle() in analogy with call_cpuidle() for the s2idle-specific idle state entry and invoke it from cpuidle_idle_call() to make the s2idle-specific idle entry code path look more similar to the "regular" idle entry one. No intentional functional impact. Signed-off-by: Rafael J. Wysocki Acked-by: Chen Yu --- drivers/cpuidle/cpuidle.c | 6 +++--- kernel/sched/idle.c | 15 +++++++++++---- 2 files changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index e092789187c6..87197319ab06 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include @@ -187,9 +186,10 @@ int cpuidle_enter_s2idle(struct cpuidle_driver *drv, struct cpuidle_device *dev) * be frozen safely. */ index = find_deepest_state(drv, dev, U64_MAX, 0, true); - if (index > 0 && !current_clr_polling_and_test()) + if (index > 0) { enter_s2idle_proper(drv, dev, index); - + local_irq_enable(); + } return index; } #endif /* CONFIG_SUSPEND */ diff --git a/kernel/sched/idle.c b/kernel/sched/idle.c index 05deb81bb3e3..1ae95b9150d3 100644 --- a/kernel/sched/idle.c +++ b/kernel/sched/idle.c @@ -96,6 +96,15 @@ void __cpuidle default_idle_call(void) } } +static int call_cpuidle_s2idle(struct cpuidle_driver *drv, + struct cpuidle_device *dev) +{ + if (current_clr_polling_and_test()) + return -EBUSY; + + return cpuidle_enter_s2idle(drv, dev); +} + static int call_cpuidle(struct cpuidle_driver *drv, struct cpuidle_device *dev, int next_state) { @@ -171,11 +180,9 @@ static void cpuidle_idle_call(void) if (idle_should_enter_s2idle()) { rcu_idle_enter(); - entered_state = cpuidle_enter_s2idle(drv, dev); - if (entered_state > 0) { - local_irq_enable(); + entered_state = call_cpuidle_s2idle(drv, dev); + if (entered_state > 0) goto exit_idle; - } rcu_idle_exit(); From cd664b0e35cb1202f40c259a1a5ea791d18c879d Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Thu, 25 Jun 2020 12:37:10 +0300 Subject: [PATCH 483/618] io_uring: fix hanging iopoll in case of -EAGAIN io_do_iopoll() won't do anything with a request unless req->iopoll_completed is set. So io_complete_rw_iopoll() has to set it, otherwise io_do_iopoll() will poll a file again and again even though the request of interest was completed long time ago. Also, remove -EAGAIN check from io_issue_sqe() as it races with the changed lines. The request will take the long way and be resubmitted from io_iopoll*(). io_kiocb's result and iopoll_completed") Fixes: bbde017a32b3 ("io_uring: add memory barrier to synchronize Signed-off-by: Pavel Begunkov Signed-off-by: Jens Axboe --- fs/io_uring.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 9de9db70b928..c3e5c1346cfe 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -1994,10 +1994,8 @@ static void io_complete_rw_iopoll(struct kiocb *kiocb, long res, long res2) WRITE_ONCE(req->result, res); /* order with io_poll_complete() checking ->result */ - if (res != -EAGAIN) { - smp_wmb(); - WRITE_ONCE(req->iopoll_completed, 1); - } + smp_wmb(); + WRITE_ONCE(req->iopoll_completed, 1); } /* @@ -5353,9 +5351,6 @@ static int io_issue_sqe(struct io_kiocb *req, const struct io_uring_sqe *sqe, if ((ctx->flags & IORING_SETUP_IOPOLL) && req->file) { const bool in_async = io_wq_current_is_worker(); - if (req->result == -EAGAIN) - return -EAGAIN; - /* workqueue context doesn't hold uring_lock, grab it now */ if (in_async) mutex_lock(&ctx->uring_lock); From d60b5fbc1ce8210759b568da49d149b868e7c6d3 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Thu, 25 Jun 2020 12:37:11 +0300 Subject: [PATCH 484/618] io_uring: fix current->mm NULL dereference on exit Don't reissue requests from io_iopoll_reap_events(), the task may not have mm, which ends up with NULL. It's better to kill everything off on exit anyway. [ 677.734670] RIP: 0010:io_iopoll_complete+0x27e/0x630 ... [ 677.734679] Call Trace: [ 677.734695] ? __send_signal+0x1f2/0x420 [ 677.734698] ? _raw_spin_unlock_irqrestore+0x24/0x40 [ 677.734699] ? send_signal+0xf5/0x140 [ 677.734700] io_iopoll_getevents+0x12f/0x1a0 [ 677.734702] io_iopoll_reap_events.part.0+0x5e/0xa0 [ 677.734703] io_ring_ctx_wait_and_kill+0x132/0x1c0 [ 677.734704] io_uring_release+0x20/0x30 [ 677.734706] __fput+0xcd/0x230 [ 677.734707] ____fput+0xe/0x10 [ 677.734709] task_work_run+0x67/0xa0 [ 677.734710] do_exit+0x35d/0xb70 [ 677.734712] do_group_exit+0x43/0xa0 [ 677.734713] get_signal+0x140/0x900 [ 677.734715] do_signal+0x37/0x780 [ 677.734717] ? enqueue_hrtimer+0x41/0xb0 [ 677.734718] ? recalibrate_cpu_khz+0x10/0x10 [ 677.734720] ? ktime_get+0x3e/0xa0 [ 677.734721] ? lapic_next_deadline+0x26/0x30 [ 677.734723] ? tick_program_event+0x4d/0x90 [ 677.734724] ? __hrtimer_get_next_event+0x4d/0x80 [ 677.734726] __prepare_exit_to_usermode+0x126/0x1c0 [ 677.734741] prepare_exit_to_usermode+0x9/0x40 [ 677.734742] idtentry_exit_cond_rcu+0x4c/0x60 [ 677.734743] sysvec_reschedule_ipi+0x92/0x160 [ 677.734744] ? asm_sysvec_reschedule_ipi+0xa/0x20 [ 677.734745] asm_sysvec_reschedule_ipi+0x12/0x20 Signed-off-by: Pavel Begunkov Signed-off-by: Jens Axboe --- fs/io_uring.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/fs/io_uring.c b/fs/io_uring.c index c3e5c1346cfe..e507737f044e 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -890,6 +890,7 @@ static int __io_sqe_files_update(struct io_ring_ctx *ctx, struct io_uring_files_update *ip, unsigned nr_args); static int io_grab_files(struct io_kiocb *req); +static void io_complete_rw_common(struct kiocb *kiocb, long res); static void io_cleanup_req(struct io_kiocb *req); static int io_file_get(struct io_submit_state *state, struct io_kiocb *req, int fd, struct file **out_file, bool fixed); @@ -1749,6 +1750,14 @@ static void io_iopoll_queue(struct list_head *again) do { req = list_first_entry(again, struct io_kiocb, list); list_del(&req->list); + + /* shouldn't happen unless io_uring is dying, cancel reqs */ + if (unlikely(!current->mm)) { + io_complete_rw_common(&req->rw.kiocb, -EAGAIN); + io_put_req(req); + continue; + } + refcount_inc(&req->refs); io_queue_async_work(req); } while (!list_empty(again)); From 8dfe804a4031ca6ba3a3efb2048534249b64f3a5 Mon Sep 17 00:00:00 2001 From: Jiping Ma Date: Mon, 11 May 2020 10:52:07 +0800 Subject: [PATCH 485/618] arm64: perf: Report the PC value in REGS_ABI_32 mode A 32-bit perf querying the registers of a compat task using REGS_ABI_32 will receive zeroes from w15, when it expects to find the PC. Return the PC value for register dwarf register 15 when returning register values for a compat task to perf. Cc: Acked-by: Mark Rutland Signed-off-by: Jiping Ma Link: https://lore.kernel.org/r/1589165527-188401-1-git-send-email-jiping.ma2@windriver.com [will: Shuffled code and added a comment] Signed-off-by: Will Deacon --- arch/arm64/kernel/perf_regs.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) diff --git a/arch/arm64/kernel/perf_regs.c b/arch/arm64/kernel/perf_regs.c index 0bbac612146e..666b225aeb3a 100644 --- a/arch/arm64/kernel/perf_regs.c +++ b/arch/arm64/kernel/perf_regs.c @@ -15,15 +15,34 @@ u64 perf_reg_value(struct pt_regs *regs, int idx) return 0; /* - * Compat (i.e. 32 bit) mode: - * - PC has been set in the pt_regs struct in kernel_entry, - * - Handle SP and LR here. + * Our handling of compat tasks (PERF_SAMPLE_REGS_ABI_32) is weird, but + * we're stuck with it for ABI compatability reasons. + * + * For a 32-bit consumer inspecting a 32-bit task, then it will look at + * the first 16 registers (see arch/arm/include/uapi/asm/perf_regs.h). + * These correspond directly to a prefix of the registers saved in our + * 'struct pt_regs', with the exception of the PC, so we copy that down + * (x15 corresponds to SP_hyp in the architecture). + * + * So far, so good. + * + * The oddity arises when a 64-bit consumer looks at a 32-bit task and + * asks for registers beyond PERF_REG_ARM_MAX. In this case, we return + * SP_usr, LR_usr and PC in the positions where the AArch64 SP, LR and + * PC registers would normally live. The initial idea was to allow a + * 64-bit unwinder to unwind a 32-bit task and, although it's not clear + * how well that works in practice, somebody might be relying on it. + * + * At the time we make a sample, we don't know whether the consumer is + * 32-bit or 64-bit, so we have to cater for both possibilities. */ if (compat_user_mode(regs)) { if ((u32)idx == PERF_REG_ARM64_SP) return regs->compat_sp; if ((u32)idx == PERF_REG_ARM64_LR) return regs->compat_lr; + if (idx == 15) + return regs->pc; } if ((u32)idx == PERF_REG_ARM64_SP) From cf961fce30f8269d0c2662c48b2618005b67dfd4 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 25 Jun 2020 17:00:41 +0300 Subject: [PATCH 486/618] spi: pxa2xx: Add support for Intel Tiger Lake PCH-H Add Intel Tiger Lake PCH-H PCI IDs. Signed-off-by: Jarkko Nikula Link: https://lore.kernel.org/r/20200625140041.745804-1-jarkko.nikula@linux.intel.com Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 20dcbd35611a..179416bb1b25 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1485,6 +1485,11 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = { { PCI_VDEVICE(INTEL, 0x4daa), LPSS_CNL_SSP }, { PCI_VDEVICE(INTEL, 0x4dab), LPSS_CNL_SSP }, { PCI_VDEVICE(INTEL, 0x4dfb), LPSS_CNL_SSP }, + /* TGL-H */ + { PCI_VDEVICE(INTEL, 0x43aa), LPSS_CNL_SSP }, + { PCI_VDEVICE(INTEL, 0x43ab), LPSS_CNL_SSP }, + { PCI_VDEVICE(INTEL, 0x43fb), LPSS_CNL_SSP }, + { PCI_VDEVICE(INTEL, 0x43fd), LPSS_CNL_SSP }, /* APL */ { PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP }, { PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP }, From 5faafd5685764e4d75376aceac91fdf75b3b16f8 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 25 Jun 2020 15:55:14 +0200 Subject: [PATCH 487/618] locking/atomics: Provide the arch_atomic_ interface to generic code Architectures with instrumented (KASAN/KCSAN) atomic operations natively provide arch_atomic_ variants that are not instrumented. It turns out that some generic code also requires arch_atomic_ in order to avoid instrumentation, so provide the arch_atomic_ interface as a direct map into the regular atomic_ interface for non-instrumented architectures. Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Paul E. McKenney --- include/linux/atomic-fallback.h | 236 +++++++++++++++++++++++++- scripts/atomic/gen-atomic-fallback.sh | 31 ++++ 2 files changed, 266 insertions(+), 1 deletion(-) diff --git a/include/linux/atomic-fallback.h b/include/linux/atomic-fallback.h index 2c4927bf7b8d..fd525c71d676 100644 --- a/include/linux/atomic-fallback.h +++ b/include/linux/atomic-fallback.h @@ -77,6 +77,9 @@ #endif /* cmpxchg64_relaxed */ +#define arch_atomic_read atomic_read +#define arch_atomic_read_acquire atomic_read_acquire + #ifndef atomic_read_acquire static __always_inline int atomic_read_acquire(const atomic_t *v) @@ -86,6 +89,9 @@ atomic_read_acquire(const atomic_t *v) #define atomic_read_acquire atomic_read_acquire #endif +#define arch_atomic_set atomic_set +#define arch_atomic_set_release atomic_set_release + #ifndef atomic_set_release static __always_inline void atomic_set_release(atomic_t *v, int i) @@ -95,6 +101,13 @@ atomic_set_release(atomic_t *v, int i) #define atomic_set_release atomic_set_release #endif +#define arch_atomic_add atomic_add + +#define arch_atomic_add_return atomic_add_return +#define arch_atomic_add_return_acquire atomic_add_return_acquire +#define arch_atomic_add_return_release atomic_add_return_release +#define arch_atomic_add_return_relaxed atomic_add_return_relaxed + #ifndef atomic_add_return_relaxed #define atomic_add_return_acquire atomic_add_return #define atomic_add_return_release atomic_add_return @@ -137,6 +150,11 @@ atomic_add_return(int i, atomic_t *v) #endif /* atomic_add_return_relaxed */ +#define arch_atomic_fetch_add atomic_fetch_add +#define arch_atomic_fetch_add_acquire atomic_fetch_add_acquire +#define arch_atomic_fetch_add_release atomic_fetch_add_release +#define arch_atomic_fetch_add_relaxed atomic_fetch_add_relaxed + #ifndef atomic_fetch_add_relaxed #define atomic_fetch_add_acquire atomic_fetch_add #define atomic_fetch_add_release atomic_fetch_add @@ -179,6 +197,13 @@ atomic_fetch_add(int i, atomic_t *v) #endif /* atomic_fetch_add_relaxed */ +#define arch_atomic_sub atomic_sub + +#define arch_atomic_sub_return atomic_sub_return +#define arch_atomic_sub_return_acquire atomic_sub_return_acquire +#define arch_atomic_sub_return_release atomic_sub_return_release +#define arch_atomic_sub_return_relaxed atomic_sub_return_relaxed + #ifndef atomic_sub_return_relaxed #define atomic_sub_return_acquire atomic_sub_return #define atomic_sub_return_release atomic_sub_return @@ -221,6 +246,11 @@ atomic_sub_return(int i, atomic_t *v) #endif /* atomic_sub_return_relaxed */ +#define arch_atomic_fetch_sub atomic_fetch_sub +#define arch_atomic_fetch_sub_acquire atomic_fetch_sub_acquire +#define arch_atomic_fetch_sub_release atomic_fetch_sub_release +#define arch_atomic_fetch_sub_relaxed atomic_fetch_sub_relaxed + #ifndef atomic_fetch_sub_relaxed #define atomic_fetch_sub_acquire atomic_fetch_sub #define atomic_fetch_sub_release atomic_fetch_sub @@ -263,6 +293,8 @@ atomic_fetch_sub(int i, atomic_t *v) #endif /* atomic_fetch_sub_relaxed */ +#define arch_atomic_inc atomic_inc + #ifndef atomic_inc static __always_inline void atomic_inc(atomic_t *v) @@ -272,6 +304,11 @@ atomic_inc(atomic_t *v) #define atomic_inc atomic_inc #endif +#define arch_atomic_inc_return atomic_inc_return +#define arch_atomic_inc_return_acquire atomic_inc_return_acquire +#define arch_atomic_inc_return_release atomic_inc_return_release +#define arch_atomic_inc_return_relaxed atomic_inc_return_relaxed + #ifndef atomic_inc_return_relaxed #ifdef atomic_inc_return #define atomic_inc_return_acquire atomic_inc_return @@ -353,6 +390,11 @@ atomic_inc_return(atomic_t *v) #endif /* atomic_inc_return_relaxed */ +#define arch_atomic_fetch_inc atomic_fetch_inc +#define arch_atomic_fetch_inc_acquire atomic_fetch_inc_acquire +#define arch_atomic_fetch_inc_release atomic_fetch_inc_release +#define arch_atomic_fetch_inc_relaxed atomic_fetch_inc_relaxed + #ifndef atomic_fetch_inc_relaxed #ifdef atomic_fetch_inc #define atomic_fetch_inc_acquire atomic_fetch_inc @@ -434,6 +476,8 @@ atomic_fetch_inc(atomic_t *v) #endif /* atomic_fetch_inc_relaxed */ +#define arch_atomic_dec atomic_dec + #ifndef atomic_dec static __always_inline void atomic_dec(atomic_t *v) @@ -443,6 +487,11 @@ atomic_dec(atomic_t *v) #define atomic_dec atomic_dec #endif +#define arch_atomic_dec_return atomic_dec_return +#define arch_atomic_dec_return_acquire atomic_dec_return_acquire +#define arch_atomic_dec_return_release atomic_dec_return_release +#define arch_atomic_dec_return_relaxed atomic_dec_return_relaxed + #ifndef atomic_dec_return_relaxed #ifdef atomic_dec_return #define atomic_dec_return_acquire atomic_dec_return @@ -524,6 +573,11 @@ atomic_dec_return(atomic_t *v) #endif /* atomic_dec_return_relaxed */ +#define arch_atomic_fetch_dec atomic_fetch_dec +#define arch_atomic_fetch_dec_acquire atomic_fetch_dec_acquire +#define arch_atomic_fetch_dec_release atomic_fetch_dec_release +#define arch_atomic_fetch_dec_relaxed atomic_fetch_dec_relaxed + #ifndef atomic_fetch_dec_relaxed #ifdef atomic_fetch_dec #define atomic_fetch_dec_acquire atomic_fetch_dec @@ -605,6 +659,13 @@ atomic_fetch_dec(atomic_t *v) #endif /* atomic_fetch_dec_relaxed */ +#define arch_atomic_and atomic_and + +#define arch_atomic_fetch_and atomic_fetch_and +#define arch_atomic_fetch_and_acquire atomic_fetch_and_acquire +#define arch_atomic_fetch_and_release atomic_fetch_and_release +#define arch_atomic_fetch_and_relaxed atomic_fetch_and_relaxed + #ifndef atomic_fetch_and_relaxed #define atomic_fetch_and_acquire atomic_fetch_and #define atomic_fetch_and_release atomic_fetch_and @@ -647,6 +708,8 @@ atomic_fetch_and(int i, atomic_t *v) #endif /* atomic_fetch_and_relaxed */ +#define arch_atomic_andnot atomic_andnot + #ifndef atomic_andnot static __always_inline void atomic_andnot(int i, atomic_t *v) @@ -656,6 +719,11 @@ atomic_andnot(int i, atomic_t *v) #define atomic_andnot atomic_andnot #endif +#define arch_atomic_fetch_andnot atomic_fetch_andnot +#define arch_atomic_fetch_andnot_acquire atomic_fetch_andnot_acquire +#define arch_atomic_fetch_andnot_release atomic_fetch_andnot_release +#define arch_atomic_fetch_andnot_relaxed atomic_fetch_andnot_relaxed + #ifndef atomic_fetch_andnot_relaxed #ifdef atomic_fetch_andnot #define atomic_fetch_andnot_acquire atomic_fetch_andnot @@ -737,6 +805,13 @@ atomic_fetch_andnot(int i, atomic_t *v) #endif /* atomic_fetch_andnot_relaxed */ +#define arch_atomic_or atomic_or + +#define arch_atomic_fetch_or atomic_fetch_or +#define arch_atomic_fetch_or_acquire atomic_fetch_or_acquire +#define arch_atomic_fetch_or_release atomic_fetch_or_release +#define arch_atomic_fetch_or_relaxed atomic_fetch_or_relaxed + #ifndef atomic_fetch_or_relaxed #define atomic_fetch_or_acquire atomic_fetch_or #define atomic_fetch_or_release atomic_fetch_or @@ -779,6 +854,13 @@ atomic_fetch_or(int i, atomic_t *v) #endif /* atomic_fetch_or_relaxed */ +#define arch_atomic_xor atomic_xor + +#define arch_atomic_fetch_xor atomic_fetch_xor +#define arch_atomic_fetch_xor_acquire atomic_fetch_xor_acquire +#define arch_atomic_fetch_xor_release atomic_fetch_xor_release +#define arch_atomic_fetch_xor_relaxed atomic_fetch_xor_relaxed + #ifndef atomic_fetch_xor_relaxed #define atomic_fetch_xor_acquire atomic_fetch_xor #define atomic_fetch_xor_release atomic_fetch_xor @@ -821,6 +903,11 @@ atomic_fetch_xor(int i, atomic_t *v) #endif /* atomic_fetch_xor_relaxed */ +#define arch_atomic_xchg atomic_xchg +#define arch_atomic_xchg_acquire atomic_xchg_acquire +#define arch_atomic_xchg_release atomic_xchg_release +#define arch_atomic_xchg_relaxed atomic_xchg_relaxed + #ifndef atomic_xchg_relaxed #define atomic_xchg_acquire atomic_xchg #define atomic_xchg_release atomic_xchg @@ -863,6 +950,11 @@ atomic_xchg(atomic_t *v, int i) #endif /* atomic_xchg_relaxed */ +#define arch_atomic_cmpxchg atomic_cmpxchg +#define arch_atomic_cmpxchg_acquire atomic_cmpxchg_acquire +#define arch_atomic_cmpxchg_release atomic_cmpxchg_release +#define arch_atomic_cmpxchg_relaxed atomic_cmpxchg_relaxed + #ifndef atomic_cmpxchg_relaxed #define atomic_cmpxchg_acquire atomic_cmpxchg #define atomic_cmpxchg_release atomic_cmpxchg @@ -905,6 +997,11 @@ atomic_cmpxchg(atomic_t *v, int old, int new) #endif /* atomic_cmpxchg_relaxed */ +#define arch_atomic_try_cmpxchg atomic_try_cmpxchg +#define arch_atomic_try_cmpxchg_acquire atomic_try_cmpxchg_acquire +#define arch_atomic_try_cmpxchg_release atomic_try_cmpxchg_release +#define arch_atomic_try_cmpxchg_relaxed atomic_try_cmpxchg_relaxed + #ifndef atomic_try_cmpxchg_relaxed #ifdef atomic_try_cmpxchg #define atomic_try_cmpxchg_acquire atomic_try_cmpxchg @@ -1002,6 +1099,8 @@ atomic_try_cmpxchg(atomic_t *v, int *old, int new) #endif /* atomic_try_cmpxchg_relaxed */ +#define arch_atomic_sub_and_test atomic_sub_and_test + #ifndef atomic_sub_and_test /** * atomic_sub_and_test - subtract value from variable and test result @@ -1020,6 +1119,8 @@ atomic_sub_and_test(int i, atomic_t *v) #define atomic_sub_and_test atomic_sub_and_test #endif +#define arch_atomic_dec_and_test atomic_dec_and_test + #ifndef atomic_dec_and_test /** * atomic_dec_and_test - decrement and test @@ -1037,6 +1138,8 @@ atomic_dec_and_test(atomic_t *v) #define atomic_dec_and_test atomic_dec_and_test #endif +#define arch_atomic_inc_and_test atomic_inc_and_test + #ifndef atomic_inc_and_test /** * atomic_inc_and_test - increment and test @@ -1054,6 +1157,8 @@ atomic_inc_and_test(atomic_t *v) #define atomic_inc_and_test atomic_inc_and_test #endif +#define arch_atomic_add_negative atomic_add_negative + #ifndef atomic_add_negative /** * atomic_add_negative - add and test if negative @@ -1072,6 +1177,8 @@ atomic_add_negative(int i, atomic_t *v) #define atomic_add_negative atomic_add_negative #endif +#define arch_atomic_fetch_add_unless atomic_fetch_add_unless + #ifndef atomic_fetch_add_unless /** * atomic_fetch_add_unless - add unless the number is already a given value @@ -1097,6 +1204,8 @@ atomic_fetch_add_unless(atomic_t *v, int a, int u) #define atomic_fetch_add_unless atomic_fetch_add_unless #endif +#define arch_atomic_add_unless atomic_add_unless + #ifndef atomic_add_unless /** * atomic_add_unless - add unless the number is already a given value @@ -1115,6 +1224,8 @@ atomic_add_unless(atomic_t *v, int a, int u) #define atomic_add_unless atomic_add_unless #endif +#define arch_atomic_inc_not_zero atomic_inc_not_zero + #ifndef atomic_inc_not_zero /** * atomic_inc_not_zero - increment unless the number is zero @@ -1131,6 +1242,8 @@ atomic_inc_not_zero(atomic_t *v) #define atomic_inc_not_zero atomic_inc_not_zero #endif +#define arch_atomic_inc_unless_negative atomic_inc_unless_negative + #ifndef atomic_inc_unless_negative static __always_inline bool atomic_inc_unless_negative(atomic_t *v) @@ -1147,6 +1260,8 @@ atomic_inc_unless_negative(atomic_t *v) #define atomic_inc_unless_negative atomic_inc_unless_negative #endif +#define arch_atomic_dec_unless_positive atomic_dec_unless_positive + #ifndef atomic_dec_unless_positive static __always_inline bool atomic_dec_unless_positive(atomic_t *v) @@ -1163,6 +1278,8 @@ atomic_dec_unless_positive(atomic_t *v) #define atomic_dec_unless_positive atomic_dec_unless_positive #endif +#define arch_atomic_dec_if_positive atomic_dec_if_positive + #ifndef atomic_dec_if_positive static __always_inline int atomic_dec_if_positive(atomic_t *v) @@ -1184,6 +1301,9 @@ atomic_dec_if_positive(atomic_t *v) #include #endif +#define arch_atomic64_read atomic64_read +#define arch_atomic64_read_acquire atomic64_read_acquire + #ifndef atomic64_read_acquire static __always_inline s64 atomic64_read_acquire(const atomic64_t *v) @@ -1193,6 +1313,9 @@ atomic64_read_acquire(const atomic64_t *v) #define atomic64_read_acquire atomic64_read_acquire #endif +#define arch_atomic64_set atomic64_set +#define arch_atomic64_set_release atomic64_set_release + #ifndef atomic64_set_release static __always_inline void atomic64_set_release(atomic64_t *v, s64 i) @@ -1202,6 +1325,13 @@ atomic64_set_release(atomic64_t *v, s64 i) #define atomic64_set_release atomic64_set_release #endif +#define arch_atomic64_add atomic64_add + +#define arch_atomic64_add_return atomic64_add_return +#define arch_atomic64_add_return_acquire atomic64_add_return_acquire +#define arch_atomic64_add_return_release atomic64_add_return_release +#define arch_atomic64_add_return_relaxed atomic64_add_return_relaxed + #ifndef atomic64_add_return_relaxed #define atomic64_add_return_acquire atomic64_add_return #define atomic64_add_return_release atomic64_add_return @@ -1244,6 +1374,11 @@ atomic64_add_return(s64 i, atomic64_t *v) #endif /* atomic64_add_return_relaxed */ +#define arch_atomic64_fetch_add atomic64_fetch_add +#define arch_atomic64_fetch_add_acquire atomic64_fetch_add_acquire +#define arch_atomic64_fetch_add_release atomic64_fetch_add_release +#define arch_atomic64_fetch_add_relaxed atomic64_fetch_add_relaxed + #ifndef atomic64_fetch_add_relaxed #define atomic64_fetch_add_acquire atomic64_fetch_add #define atomic64_fetch_add_release atomic64_fetch_add @@ -1286,6 +1421,13 @@ atomic64_fetch_add(s64 i, atomic64_t *v) #endif /* atomic64_fetch_add_relaxed */ +#define arch_atomic64_sub atomic64_sub + +#define arch_atomic64_sub_return atomic64_sub_return +#define arch_atomic64_sub_return_acquire atomic64_sub_return_acquire +#define arch_atomic64_sub_return_release atomic64_sub_return_release +#define arch_atomic64_sub_return_relaxed atomic64_sub_return_relaxed + #ifndef atomic64_sub_return_relaxed #define atomic64_sub_return_acquire atomic64_sub_return #define atomic64_sub_return_release atomic64_sub_return @@ -1328,6 +1470,11 @@ atomic64_sub_return(s64 i, atomic64_t *v) #endif /* atomic64_sub_return_relaxed */ +#define arch_atomic64_fetch_sub atomic64_fetch_sub +#define arch_atomic64_fetch_sub_acquire atomic64_fetch_sub_acquire +#define arch_atomic64_fetch_sub_release atomic64_fetch_sub_release +#define arch_atomic64_fetch_sub_relaxed atomic64_fetch_sub_relaxed + #ifndef atomic64_fetch_sub_relaxed #define atomic64_fetch_sub_acquire atomic64_fetch_sub #define atomic64_fetch_sub_release atomic64_fetch_sub @@ -1370,6 +1517,8 @@ atomic64_fetch_sub(s64 i, atomic64_t *v) #endif /* atomic64_fetch_sub_relaxed */ +#define arch_atomic64_inc atomic64_inc + #ifndef atomic64_inc static __always_inline void atomic64_inc(atomic64_t *v) @@ -1379,6 +1528,11 @@ atomic64_inc(atomic64_t *v) #define atomic64_inc atomic64_inc #endif +#define arch_atomic64_inc_return atomic64_inc_return +#define arch_atomic64_inc_return_acquire atomic64_inc_return_acquire +#define arch_atomic64_inc_return_release atomic64_inc_return_release +#define arch_atomic64_inc_return_relaxed atomic64_inc_return_relaxed + #ifndef atomic64_inc_return_relaxed #ifdef atomic64_inc_return #define atomic64_inc_return_acquire atomic64_inc_return @@ -1460,6 +1614,11 @@ atomic64_inc_return(atomic64_t *v) #endif /* atomic64_inc_return_relaxed */ +#define arch_atomic64_fetch_inc atomic64_fetch_inc +#define arch_atomic64_fetch_inc_acquire atomic64_fetch_inc_acquire +#define arch_atomic64_fetch_inc_release atomic64_fetch_inc_release +#define arch_atomic64_fetch_inc_relaxed atomic64_fetch_inc_relaxed + #ifndef atomic64_fetch_inc_relaxed #ifdef atomic64_fetch_inc #define atomic64_fetch_inc_acquire atomic64_fetch_inc @@ -1541,6 +1700,8 @@ atomic64_fetch_inc(atomic64_t *v) #endif /* atomic64_fetch_inc_relaxed */ +#define arch_atomic64_dec atomic64_dec + #ifndef atomic64_dec static __always_inline void atomic64_dec(atomic64_t *v) @@ -1550,6 +1711,11 @@ atomic64_dec(atomic64_t *v) #define atomic64_dec atomic64_dec #endif +#define arch_atomic64_dec_return atomic64_dec_return +#define arch_atomic64_dec_return_acquire atomic64_dec_return_acquire +#define arch_atomic64_dec_return_release atomic64_dec_return_release +#define arch_atomic64_dec_return_relaxed atomic64_dec_return_relaxed + #ifndef atomic64_dec_return_relaxed #ifdef atomic64_dec_return #define atomic64_dec_return_acquire atomic64_dec_return @@ -1631,6 +1797,11 @@ atomic64_dec_return(atomic64_t *v) #endif /* atomic64_dec_return_relaxed */ +#define arch_atomic64_fetch_dec atomic64_fetch_dec +#define arch_atomic64_fetch_dec_acquire atomic64_fetch_dec_acquire +#define arch_atomic64_fetch_dec_release atomic64_fetch_dec_release +#define arch_atomic64_fetch_dec_relaxed atomic64_fetch_dec_relaxed + #ifndef atomic64_fetch_dec_relaxed #ifdef atomic64_fetch_dec #define atomic64_fetch_dec_acquire atomic64_fetch_dec @@ -1712,6 +1883,13 @@ atomic64_fetch_dec(atomic64_t *v) #endif /* atomic64_fetch_dec_relaxed */ +#define arch_atomic64_and atomic64_and + +#define arch_atomic64_fetch_and atomic64_fetch_and +#define arch_atomic64_fetch_and_acquire atomic64_fetch_and_acquire +#define arch_atomic64_fetch_and_release atomic64_fetch_and_release +#define arch_atomic64_fetch_and_relaxed atomic64_fetch_and_relaxed + #ifndef atomic64_fetch_and_relaxed #define atomic64_fetch_and_acquire atomic64_fetch_and #define atomic64_fetch_and_release atomic64_fetch_and @@ -1754,6 +1932,8 @@ atomic64_fetch_and(s64 i, atomic64_t *v) #endif /* atomic64_fetch_and_relaxed */ +#define arch_atomic64_andnot atomic64_andnot + #ifndef atomic64_andnot static __always_inline void atomic64_andnot(s64 i, atomic64_t *v) @@ -1763,6 +1943,11 @@ atomic64_andnot(s64 i, atomic64_t *v) #define atomic64_andnot atomic64_andnot #endif +#define arch_atomic64_fetch_andnot atomic64_fetch_andnot +#define arch_atomic64_fetch_andnot_acquire atomic64_fetch_andnot_acquire +#define arch_atomic64_fetch_andnot_release atomic64_fetch_andnot_release +#define arch_atomic64_fetch_andnot_relaxed atomic64_fetch_andnot_relaxed + #ifndef atomic64_fetch_andnot_relaxed #ifdef atomic64_fetch_andnot #define atomic64_fetch_andnot_acquire atomic64_fetch_andnot @@ -1844,6 +2029,13 @@ atomic64_fetch_andnot(s64 i, atomic64_t *v) #endif /* atomic64_fetch_andnot_relaxed */ +#define arch_atomic64_or atomic64_or + +#define arch_atomic64_fetch_or atomic64_fetch_or +#define arch_atomic64_fetch_or_acquire atomic64_fetch_or_acquire +#define arch_atomic64_fetch_or_release atomic64_fetch_or_release +#define arch_atomic64_fetch_or_relaxed atomic64_fetch_or_relaxed + #ifndef atomic64_fetch_or_relaxed #define atomic64_fetch_or_acquire atomic64_fetch_or #define atomic64_fetch_or_release atomic64_fetch_or @@ -1886,6 +2078,13 @@ atomic64_fetch_or(s64 i, atomic64_t *v) #endif /* atomic64_fetch_or_relaxed */ +#define arch_atomic64_xor atomic64_xor + +#define arch_atomic64_fetch_xor atomic64_fetch_xor +#define arch_atomic64_fetch_xor_acquire atomic64_fetch_xor_acquire +#define arch_atomic64_fetch_xor_release atomic64_fetch_xor_release +#define arch_atomic64_fetch_xor_relaxed atomic64_fetch_xor_relaxed + #ifndef atomic64_fetch_xor_relaxed #define atomic64_fetch_xor_acquire atomic64_fetch_xor #define atomic64_fetch_xor_release atomic64_fetch_xor @@ -1928,6 +2127,11 @@ atomic64_fetch_xor(s64 i, atomic64_t *v) #endif /* atomic64_fetch_xor_relaxed */ +#define arch_atomic64_xchg atomic64_xchg +#define arch_atomic64_xchg_acquire atomic64_xchg_acquire +#define arch_atomic64_xchg_release atomic64_xchg_release +#define arch_atomic64_xchg_relaxed atomic64_xchg_relaxed + #ifndef atomic64_xchg_relaxed #define atomic64_xchg_acquire atomic64_xchg #define atomic64_xchg_release atomic64_xchg @@ -1970,6 +2174,11 @@ atomic64_xchg(atomic64_t *v, s64 i) #endif /* atomic64_xchg_relaxed */ +#define arch_atomic64_cmpxchg atomic64_cmpxchg +#define arch_atomic64_cmpxchg_acquire atomic64_cmpxchg_acquire +#define arch_atomic64_cmpxchg_release atomic64_cmpxchg_release +#define arch_atomic64_cmpxchg_relaxed atomic64_cmpxchg_relaxed + #ifndef atomic64_cmpxchg_relaxed #define atomic64_cmpxchg_acquire atomic64_cmpxchg #define atomic64_cmpxchg_release atomic64_cmpxchg @@ -2012,6 +2221,11 @@ atomic64_cmpxchg(atomic64_t *v, s64 old, s64 new) #endif /* atomic64_cmpxchg_relaxed */ +#define arch_atomic64_try_cmpxchg atomic64_try_cmpxchg +#define arch_atomic64_try_cmpxchg_acquire atomic64_try_cmpxchg_acquire +#define arch_atomic64_try_cmpxchg_release atomic64_try_cmpxchg_release +#define arch_atomic64_try_cmpxchg_relaxed atomic64_try_cmpxchg_relaxed + #ifndef atomic64_try_cmpxchg_relaxed #ifdef atomic64_try_cmpxchg #define atomic64_try_cmpxchg_acquire atomic64_try_cmpxchg @@ -2109,6 +2323,8 @@ atomic64_try_cmpxchg(atomic64_t *v, s64 *old, s64 new) #endif /* atomic64_try_cmpxchg_relaxed */ +#define arch_atomic64_sub_and_test atomic64_sub_and_test + #ifndef atomic64_sub_and_test /** * atomic64_sub_and_test - subtract value from variable and test result @@ -2127,6 +2343,8 @@ atomic64_sub_and_test(s64 i, atomic64_t *v) #define atomic64_sub_and_test atomic64_sub_and_test #endif +#define arch_atomic64_dec_and_test atomic64_dec_and_test + #ifndef atomic64_dec_and_test /** * atomic64_dec_and_test - decrement and test @@ -2144,6 +2362,8 @@ atomic64_dec_and_test(atomic64_t *v) #define atomic64_dec_and_test atomic64_dec_and_test #endif +#define arch_atomic64_inc_and_test atomic64_inc_and_test + #ifndef atomic64_inc_and_test /** * atomic64_inc_and_test - increment and test @@ -2161,6 +2381,8 @@ atomic64_inc_and_test(atomic64_t *v) #define atomic64_inc_and_test atomic64_inc_and_test #endif +#define arch_atomic64_add_negative atomic64_add_negative + #ifndef atomic64_add_negative /** * atomic64_add_negative - add and test if negative @@ -2179,6 +2401,8 @@ atomic64_add_negative(s64 i, atomic64_t *v) #define atomic64_add_negative atomic64_add_negative #endif +#define arch_atomic64_fetch_add_unless atomic64_fetch_add_unless + #ifndef atomic64_fetch_add_unless /** * atomic64_fetch_add_unless - add unless the number is already a given value @@ -2204,6 +2428,8 @@ atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u) #define atomic64_fetch_add_unless atomic64_fetch_add_unless #endif +#define arch_atomic64_add_unless atomic64_add_unless + #ifndef atomic64_add_unless /** * atomic64_add_unless - add unless the number is already a given value @@ -2222,6 +2448,8 @@ atomic64_add_unless(atomic64_t *v, s64 a, s64 u) #define atomic64_add_unless atomic64_add_unless #endif +#define arch_atomic64_inc_not_zero atomic64_inc_not_zero + #ifndef atomic64_inc_not_zero /** * atomic64_inc_not_zero - increment unless the number is zero @@ -2238,6 +2466,8 @@ atomic64_inc_not_zero(atomic64_t *v) #define atomic64_inc_not_zero atomic64_inc_not_zero #endif +#define arch_atomic64_inc_unless_negative atomic64_inc_unless_negative + #ifndef atomic64_inc_unless_negative static __always_inline bool atomic64_inc_unless_negative(atomic64_t *v) @@ -2254,6 +2484,8 @@ atomic64_inc_unless_negative(atomic64_t *v) #define atomic64_inc_unless_negative atomic64_inc_unless_negative #endif +#define arch_atomic64_dec_unless_positive atomic64_dec_unless_positive + #ifndef atomic64_dec_unless_positive static __always_inline bool atomic64_dec_unless_positive(atomic64_t *v) @@ -2270,6 +2502,8 @@ atomic64_dec_unless_positive(atomic64_t *v) #define atomic64_dec_unless_positive atomic64_dec_unless_positive #endif +#define arch_atomic64_dec_if_positive atomic64_dec_if_positive + #ifndef atomic64_dec_if_positive static __always_inline s64 atomic64_dec_if_positive(atomic64_t *v) @@ -2288,4 +2522,4 @@ atomic64_dec_if_positive(atomic64_t *v) #endif #endif /* _LINUX_ATOMIC_FALLBACK_H */ -// 1fac0941c79bf0ae100723cc2ac9b94061f0b67a +// 9d95b56f98d82a2a26c7b79ccdd0c47572d50a6f diff --git a/scripts/atomic/gen-atomic-fallback.sh b/scripts/atomic/gen-atomic-fallback.sh index 0fd1cf0c2b94..693dfa1de430 100755 --- a/scripts/atomic/gen-atomic-fallback.sh +++ b/scripts/atomic/gen-atomic-fallback.sh @@ -58,6 +58,21 @@ cat << EOF EOF } +gen_proto_order_variant() +{ + local meta="$1"; shift + local pfx="$1"; shift + local name="$1"; shift + local sfx="$1"; shift + local order="$1"; shift + local arch="$1" + local atomic="$2" + + local basename="${arch}${atomic}_${pfx}${name}${sfx}" + + printf "#define arch_${basename}${order} ${basename}${order}\n" +} + #gen_proto_order_variants(meta, pfx, name, sfx, arch, atomic, int, args...) gen_proto_order_variants() { @@ -72,6 +87,22 @@ gen_proto_order_variants() local template="$(find_fallback_template "${pfx}" "${name}" "${sfx}" "${order}")" + if [ -z "$arch" ]; then + gen_proto_order_variant "${meta}" "${pfx}" "${name}" "${sfx}" "" "$@" + + if meta_has_acquire "${meta}"; then + gen_proto_order_variant "${meta}" "${pfx}" "${name}" "${sfx}" "_acquire" "$@" + fi + if meta_has_release "${meta}"; then + gen_proto_order_variant "${meta}" "${pfx}" "${name}" "${sfx}" "_release" "$@" + fi + if meta_has_relaxed "${meta}"; then + gen_proto_order_variant "${meta}" "${pfx}" "${name}" "${sfx}" "_relaxed" "$@" + fi + + echo "" + fi + # If we don't have relaxed atomics, then we don't bother with ordering fallbacks # read_acquire and set_release need to be templated, though if ! meta_has_relaxed "${meta}"; then From b58e733fd774f3f4b49d9e7640d172a57e35200e Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 15 Jun 2020 18:24:27 +0200 Subject: [PATCH 488/618] rcu: Fixup noinstr warnings A KCSAN build revealed we have explicit annoations through atomic_*() usage, switch to arch_atomic_*() for the respective functions. vmlinux.o: warning: objtool: rcu_nmi_exit()+0x4d: call to __kcsan_check_access() leaves .noinstr.text section vmlinux.o: warning: objtool: rcu_dynticks_eqs_enter()+0x25: call to __kcsan_check_access() leaves .noinstr.text section vmlinux.o: warning: objtool: rcu_nmi_enter()+0x4f: call to __kcsan_check_access() leaves .noinstr.text section vmlinux.o: warning: objtool: rcu_dynticks_eqs_exit()+0x2a: call to __kcsan_check_access() leaves .noinstr.text section vmlinux.o: warning: objtool: __rcu_is_watching()+0x25: call to __kcsan_check_access() leaves .noinstr.text section Additionally, without the NOP in instrumentation_begin(), objtool would not detect the lack of the 'else instrumentation_begin();' branch in rcu_nmi_enter(). Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Paul E. McKenney --- include/linux/compiler.h | 2 +- kernel/rcu/tree.c | 32 +++++++++++++++++++++++++------- 2 files changed, 26 insertions(+), 8 deletions(-) diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 30827f82ad62..204e76856435 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -123,7 +123,7 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val, #ifdef CONFIG_DEBUG_ENTRY /* Begin/end of an instrumentation safe region */ #define instrumentation_begin() ({ \ - asm volatile("%c0:\n\t" \ + asm volatile("%c0: nop\n\t" \ ".pushsection .discard.instr_begin\n\t" \ ".long %c0b - .\n\t" \ ".popsection\n\t" : : "i" (__COUNTER__)); \ diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c index c716eadc7617..6c6569e0586c 100644 --- a/kernel/rcu/tree.c +++ b/kernel/rcu/tree.c @@ -250,7 +250,7 @@ static noinstr void rcu_dynticks_eqs_enter(void) * next idle sojourn. */ rcu_dynticks_task_trace_enter(); // Before ->dynticks update! - seq = atomic_add_return(RCU_DYNTICK_CTRL_CTR, &rdp->dynticks); + seq = arch_atomic_add_return(RCU_DYNTICK_CTRL_CTR, &rdp->dynticks); // RCU is no longer watching. Better be in extended quiescent state! WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && (seq & RCU_DYNTICK_CTRL_CTR)); @@ -274,13 +274,13 @@ static noinstr void rcu_dynticks_eqs_exit(void) * and we also must force ordering with the next RCU read-side * critical section. */ - seq = atomic_add_return(RCU_DYNTICK_CTRL_CTR, &rdp->dynticks); + seq = arch_atomic_add_return(RCU_DYNTICK_CTRL_CTR, &rdp->dynticks); // RCU is now watching. Better not be in an extended quiescent state! rcu_dynticks_task_trace_exit(); // After ->dynticks update! WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && !(seq & RCU_DYNTICK_CTRL_CTR)); if (seq & RCU_DYNTICK_CTRL_MASK) { - atomic_andnot(RCU_DYNTICK_CTRL_MASK, &rdp->dynticks); + arch_atomic_andnot(RCU_DYNTICK_CTRL_MASK, &rdp->dynticks); smp_mb__after_atomic(); /* _exit after clearing mask. */ } } @@ -313,7 +313,7 @@ static __always_inline bool rcu_dynticks_curr_cpu_in_eqs(void) { struct rcu_data *rdp = this_cpu_ptr(&rcu_data); - return !(atomic_read(&rdp->dynticks) & RCU_DYNTICK_CTRL_CTR); + return !(arch_atomic_read(&rdp->dynticks) & RCU_DYNTICK_CTRL_CTR); } /* @@ -633,6 +633,10 @@ static noinstr void rcu_eqs_enter(bool user) do_nocb_deferred_wakeup(rdp); rcu_prepare_for_idle(); rcu_preempt_deferred_qs(current); + + // instrumentation for the noinstr rcu_dynticks_eqs_enter() + instrument_atomic_write(&rdp->dynticks, sizeof(rdp->dynticks)); + instrumentation_end(); WRITE_ONCE(rdp->dynticks_nesting, 0); /* Avoid irq-access tearing. */ // RCU is watching here ... @@ -692,6 +696,7 @@ noinstr void rcu_nmi_exit(void) { struct rcu_data *rdp = this_cpu_ptr(&rcu_data); + instrumentation_begin(); /* * Check for ->dynticks_nmi_nesting underflow and bad ->dynticks. * (We are exiting an NMI handler, so RCU better be paying attention @@ -705,7 +710,6 @@ noinstr void rcu_nmi_exit(void) * leave it in non-RCU-idle state. */ if (rdp->dynticks_nmi_nesting != 1) { - instrumentation_begin(); trace_rcu_dyntick(TPS("--="), rdp->dynticks_nmi_nesting, rdp->dynticks_nmi_nesting - 2, atomic_read(&rdp->dynticks)); WRITE_ONCE(rdp->dynticks_nmi_nesting, /* No store tearing. */ @@ -714,13 +718,15 @@ noinstr void rcu_nmi_exit(void) return; } - instrumentation_begin(); /* This NMI interrupted an RCU-idle CPU, restore RCU-idleness. */ trace_rcu_dyntick(TPS("Startirq"), rdp->dynticks_nmi_nesting, 0, atomic_read(&rdp->dynticks)); WRITE_ONCE(rdp->dynticks_nmi_nesting, 0); /* Avoid store tearing. */ if (!in_nmi()) rcu_prepare_for_idle(); + + // instrumentation for the noinstr rcu_dynticks_eqs_enter() + instrument_atomic_write(&rdp->dynticks, sizeof(rdp->dynticks)); instrumentation_end(); // RCU is watching here ... @@ -838,6 +844,10 @@ static void noinstr rcu_eqs_exit(bool user) rcu_dynticks_eqs_exit(); // ... but is watching here. instrumentation_begin(); + + // instrumentation for the noinstr rcu_dynticks_eqs_exit() + instrument_atomic_write(&rdp->dynticks, sizeof(rdp->dynticks)); + rcu_cleanup_after_idle(); trace_rcu_dyntick(TPS("End"), rdp->dynticks_nesting, 1, atomic_read(&rdp->dynticks)); WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && !user && !is_idle_task(current)); @@ -983,13 +993,21 @@ noinstr void rcu_nmi_enter(void) if (!in_nmi()) rcu_cleanup_after_idle(); + instrumentation_begin(); + // instrumentation for the noinstr rcu_dynticks_curr_cpu_in_eqs() + instrument_atomic_read(&rdp->dynticks, sizeof(rdp->dynticks)); + // instrumentation for the noinstr rcu_dynticks_eqs_exit() + instrument_atomic_write(&rdp->dynticks, sizeof(rdp->dynticks)); + incby = 1; } else if (!in_nmi()) { instrumentation_begin(); rcu_irq_enter_check_tick(); instrumentation_end(); + } else { + instrumentation_begin(); } - instrumentation_begin(); + trace_rcu_dyntick(incby == 1 ? TPS("Endirq") : TPS("++="), rdp->dynticks_nmi_nesting, rdp->dynticks_nmi_nesting + incby, atomic_read(&rdp->dynticks)); From ebfa440ce38b7e2e04c3124aa89c8a9f4094cf21 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Thu, 25 Jun 2020 11:04:23 -0600 Subject: [PATCH 489/618] vfio/pci: Fix SR-IOV VF handling with MMIO blocking SR-IOV VFs do not implement the memory enable bit of the command register, therefore this bit is not set in config space after pci_enable_device(). This leads to an unintended difference between PF and VF in hand-off state to the user. We can correct this by setting the initial value of the memory enable bit in our virtualized config space. There's really no need however to ever fault a user on a VF though as this would only indicate an error in the user's management of the enable bit, versus a PF where the same access could trigger hardware faults. Fixes: abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory") Signed-off-by: Alex Williamson --- drivers/vfio/pci/vfio_pci_config.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c index 8746c943247a..d98843feddce 100644 --- a/drivers/vfio/pci/vfio_pci_config.c +++ b/drivers/vfio/pci/vfio_pci_config.c @@ -398,9 +398,15 @@ static inline void p_setd(struct perm_bits *p, int off, u32 virt, u32 write) /* Caller should hold memory_lock semaphore */ bool __vfio_pci_memory_enabled(struct vfio_pci_device *vdev) { + struct pci_dev *pdev = vdev->pdev; u16 cmd = le16_to_cpu(*(__le16 *)&vdev->vconfig[PCI_COMMAND]); - return cmd & PCI_COMMAND_MEMORY; + /* + * SR-IOV VF memory enable is handled by the MSE bit in the + * PF SR-IOV capability, there's therefore no need to trigger + * faults based on the virtual value. + */ + return pdev->is_virtfn || (cmd & PCI_COMMAND_MEMORY); } /* @@ -1728,6 +1734,15 @@ int vfio_config_init(struct vfio_pci_device *vdev) vconfig[PCI_INTERRUPT_PIN]); vconfig[PCI_INTERRUPT_PIN] = 0; /* Gratuitous for good VFs */ + + /* + * VFs do no implement the memory enable bit of the COMMAND + * register therefore we'll not have it set in our initial + * copy of config space after pci_enable_device(). For + * consistency with PFs, set the virtual enable bit here. + */ + *(__le16 *)&vconfig[PCI_COMMAND] |= + cpu_to_le16(PCI_COMMAND_MEMORY); } if (!IS_ENABLED(CONFIG_VFIO_PCI_INTX) || vdev->nointx) From 5a3235e50c0e3219d8659cbec996dae960acfee8 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Thu, 25 Jun 2020 09:18:16 +0200 Subject: [PATCH 490/618] net: phy: mscc: avoid skcipher API for single block AES encryption The skcipher API dynamically instantiates the transformation object on request that implements the requested algorithm optimally on the given platform. This notion of optimality only matters for cases like bulk network or disk encryption, where performance can be a bottleneck, or in cases where the algorithm itself is not known at compile time. In the mscc case, we are dealing with AES encryption of a single block, and so neither concern applies, and we are better off using the AES library interface, which is lightweight and safe for this kind of use. Note that the scatterlist API does not permit references to buffers that are located on the stack, so the existing code is incorrect in any case, but avoiding the skcipher and scatterlist APIs entirely is the most straight-forward approach to fixing this. Cc: Antoine Tenart Cc: Andrew Lunn Cc: Florian Fainelli Cc: Heiner Kallweit Cc: "David S. Miller" Cc: Jakub Kicinski Fixes: 28c5107aa904e ("net: phy: mscc: macsec support") Reviewed-by: Eric Biggers Signed-off-by: Ard Biesheuvel Tested-by: Antoine Tenart Signed-off-by: David S. Miller --- drivers/net/phy/Kconfig | 3 +-- drivers/net/phy/mscc/mscc_macsec.c | 40 +++++++----------------------- 2 files changed, 10 insertions(+), 33 deletions(-) diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index f25702386d83..e351d65533aa 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -480,8 +480,7 @@ config MICROCHIP_T1_PHY config MICROSEMI_PHY tristate "Microsemi PHYs" depends on MACSEC || MACSEC=n - select CRYPTO_AES - select CRYPTO_ECB + select CRYPTO_LIB_AES if MACSEC help Currently supports VSC8514, VSC8530, VSC8531, VSC8540 and VSC8541 PHYs diff --git a/drivers/net/phy/mscc/mscc_macsec.c b/drivers/net/phy/mscc/mscc_macsec.c index b4d3dc4068e2..d53ca884b5c9 100644 --- a/drivers/net/phy/mscc/mscc_macsec.c +++ b/drivers/net/phy/mscc/mscc_macsec.c @@ -10,7 +10,7 @@ #include #include -#include +#include #include @@ -500,39 +500,17 @@ static u32 vsc8584_macsec_flow_context_id(struct macsec_flow *flow) static int vsc8584_macsec_derive_key(const u8 key[MACSEC_KEYID_LEN], u16 key_len, u8 hkey[16]) { - struct crypto_skcipher *tfm = crypto_alloc_skcipher("ecb(aes)", 0, 0); - struct skcipher_request *req = NULL; - struct scatterlist src, dst; - DECLARE_CRYPTO_WAIT(wait); - u32 input[4] = {0}; + const u8 input[AES_BLOCK_SIZE] = {0}; + struct crypto_aes_ctx ctx; int ret; - if (IS_ERR(tfm)) - return PTR_ERR(tfm); + ret = aes_expandkey(&ctx, key, key_len); + if (ret) + return ret; - req = skcipher_request_alloc(tfm, GFP_KERNEL); - if (!req) { - ret = -ENOMEM; - goto out; - } - - skcipher_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG | - CRYPTO_TFM_REQ_MAY_SLEEP, crypto_req_done, - &wait); - ret = crypto_skcipher_setkey(tfm, key, key_len); - if (ret < 0) - goto out; - - sg_init_one(&src, input, 16); - sg_init_one(&dst, hkey, 16); - skcipher_request_set_crypt(req, &src, &dst, 16, NULL); - - ret = crypto_wait_req(crypto_skcipher_encrypt(req), &wait); - -out: - skcipher_request_free(req); - crypto_free_skcipher(tfm); - return ret; + aes_encrypt(&ctx, hkey, input); + memzero_explicit(&ctx, sizeof(ctx)); + return 0; } static int vsc8584_macsec_transformation(struct phy_device *phydev, From 108447fd0d1a34b0929cd26dc637c917a734ebab Mon Sep 17 00:00:00 2001 From: Sai Prakash Ranjan Date: Thu, 25 Jun 2020 16:01:23 +0530 Subject: [PATCH 491/618] arm64: Add KRYO{3,4}XX silver CPU cores to SSB safelist QCOM KRYO{3,4}XX silver/LITTLE CPU cores are based on Cortex-A55 and are SSB safe, hence add them to SSB safelist -> arm64_ssb_cpus[]. Reported-by: Stephen Boyd Signed-off-by: Sai Prakash Ranjan Reviewed-by: Douglas Anderson Link: https://lore.kernel.org/r/20200625103123.7240-1-saiprakash.ranjan@codeaurora.org Signed-off-by: Will Deacon --- arch/arm64/kernel/cpu_errata.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index ad06d6802d2e..cf50c53e9357 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -460,6 +460,8 @@ static const struct midr_range arm64_ssb_cpus[] = { MIDR_ALL_VERSIONS(MIDR_CORTEX_A53), MIDR_ALL_VERSIONS(MIDR_CORTEX_A55), MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53), + MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_3XX_SILVER), + MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_4XX_SILVER), {}, }; From 2570284060b48f3f79d8f1a2698792f36c385e9a Mon Sep 17 00:00:00 2001 From: Denis Kirjanov Date: Thu, 25 Jun 2020 14:51:06 +0300 Subject: [PATCH 492/618] tcp: don't ignore ECN CWR on pure ACK there is a problem with the CWR flag set in an incoming ACK segment and it leads to the situation when the ECE flag is latched forever the following packetdrill script shows what happens: // Stack receives incoming segments with CE set +0.1 <[ect0] . 11001:12001(1000) ack 1001 win 65535 +0.0 <[ce] . 12001:13001(1000) ack 1001 win 65535 +0.0 <[ect0] P. 13001:14001(1000) ack 1001 win 65535 // Stack repsonds with ECN ECHO +0.0 >[noecn] . 1001:1001(0) ack 12001 +0.0 >[noecn] E. 1001:1001(0) ack 13001 +0.0 >[noecn] E. 1001:1001(0) ack 14001 // Write a packet +0.1 write(3, ..., 1000) = 1000 +0.0 >[ect0] PE. 1001:2001(1000) ack 14001 // Pure ACK received +0.01 <[noecn] W. 14001:14001(0) ack 2001 win 65535 // Since CWR was sent, this packet should NOT have ECE set +0.1 write(3, ..., 1000) = 1000 +0.0 >[ect0] P. 2001:3001(1000) ack 14001 // but Linux will still keep ECE latched here, with packetdrill // flagging a missing ECE flag, expecting // >[ect0] PE. 2001:3001(1000) ack 14001 // in the script In the situation above we will continue to send ECN ECHO packets and trigger the peer to reduce the congestion window. To avoid that we can check CWR on pure ACKs received. v3: - Add a sequence check to avoid sending an ACK to an ACK v2: - Adjusted the comment - move CWR check before checking for unacknowledged packets Signed-off-by: Denis Kirjanov Acked-by: Neal Cardwell Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 12fda8f27b08..f3a0eb139b76 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -261,7 +261,8 @@ static void tcp_ecn_accept_cwr(struct sock *sk, const struct sk_buff *skb) * cwnd may be very low (even just 1 packet), so we should ACK * immediately. */ - inet_csk(sk)->icsk_ack.pending |= ICSK_ACK_NOW; + if (TCP_SKB_CB(skb)->seq != TCP_SKB_CB(skb)->end_seq) + inet_csk(sk)->icsk_ack.pending |= ICSK_ACK_NOW; } } @@ -3665,6 +3666,15 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) tcp_in_ack_event(sk, ack_ev_flags); } + /* This is a deviation from RFC3168 since it states that: + * "When the TCP data sender is ready to set the CWR bit after reducing + * the congestion window, it SHOULD set the CWR bit only on the first + * new data packet that it transmits." + * We accept CWR on pure ACKs to be more robust + * with widely-deployed TCP implementations that do this. + */ + tcp_ecn_accept_cwr(sk, skb); + /* We passed data and got it acked, remove any soft error * log. Something worked... */ @@ -4800,8 +4810,6 @@ static void tcp_data_queue(struct sock *sk, struct sk_buff *skb) skb_dst_drop(skb); __skb_pull(skb, tcp_hdr(skb)->doff * 4); - tcp_ecn_accept_cwr(sk, skb); - tp->rx_opt.dsack = 0; /* Queue data for delivery to the user. From 206e732323c2a8e6d11f4125a62c27e60a50a850 Mon Sep 17 00:00:00 2001 From: Thomas Martitz Date: Thu, 25 Jun 2020 14:26:03 +0200 Subject: [PATCH 493/618] net: bridge: enfore alignment for ethernet address The eth_addr member is passed to ether_addr functions that require 2-byte alignment, therefore the member must be properly aligned to avoid unaligned accesses. The problem is in place since the initial merge of multicast to unicast: commit 6db6f0eae6052b70885562e1733896647ec1d807 bridge: multicast to unicast Fixes: 6db6f0eae605 ("bridge: multicast to unicast") Cc: Roopa Prabhu Cc: Nikolay Aleksandrov Cc: David S. Miller Cc: Jakub Kicinski Cc: Felix Fietkau Signed-off-by: Thomas Martitz Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- net/bridge/br_private.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 7501be4eeba0..2130fe0194e6 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -217,8 +217,8 @@ struct net_bridge_port_group { struct rcu_head rcu; struct timer_list timer; struct br_ip addr; + unsigned char eth_addr[ETH_ALEN] __aligned(2); unsigned char flags; - unsigned char eth_addr[ETH_ALEN]; }; struct net_bridge_mdb_entry { From a0fc3b32893b29a7b3a2771b6d63bae16cb1e8de Mon Sep 17 00:00:00 2001 From: Vincent Chen Date: Tue, 23 Jun 2020 09:13:22 +0800 Subject: [PATCH 494/618] riscv: Add -fPIC option to CFLAGS_vgettimeofday.o The time related vDSO functions use a variable, vdso_data, to access the vDSO data page to get the system time information. Because the vdso_data for CFLAGS_vgettimeofday.o is an external variable defined in vdso.o, the CFLAGS_vgettimeofday.o should be compiled with -fPIC to ensure that vdso_data is addressable. Reported-by: kernel test robot Signed-off-by: Vincent Chen Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/vdso/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile index 38ba55b0eb9d..29cf052f6541 100644 --- a/arch/riscv/kernel/vdso/Makefile +++ b/arch/riscv/kernel/vdso/Makefile @@ -17,7 +17,7 @@ vdso-syms += flush_icache obj-vdso = $(patsubst %, %.o, $(vdso-syms)) note.o ifneq ($(c-gettimeofday-y),) - CFLAGS_vgettimeofday.o += -include $(c-gettimeofday-y) + CFLAGS_vgettimeofday.o += -fPIC -include $(c-gettimeofday-y) endif # Build rules From d0a5fdf4cc83dabcdea668f971b8a2e916437711 Mon Sep 17 00:00:00 2001 From: Vincent Chen Date: Tue, 23 Jun 2020 09:24:17 +0800 Subject: [PATCH 495/618] clk: sifive: allocate sufficient memory for struct __prci_data The (struct __prci_data).hw_clks.hws is an array with dynamic elements. Using struct_size(pd, hw_clks.hws, ARRAY_SIZE(__prci_init_clocks)) instead of sizeof(*pd) to get the correct memory size of struct __prci_data for sifive/fu540-prci. After applying this modifications, the kernel runs smoothly with CONFIG_SLAB_FREELIST_RANDOM enabled on the HiFive unleashed board. Fixes: 30b8e27e3b58 ("clk: sifive: add a driver for the SiFive FU540 PRCI IP block") Signed-off-by: Vincent Chen Signed-off-by: Palmer Dabbelt --- drivers/clk/sifive/fu540-prci.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/clk/sifive/fu540-prci.c b/drivers/clk/sifive/fu540-prci.c index 6282ee2f361c..a8901f90a61a 100644 --- a/drivers/clk/sifive/fu540-prci.c +++ b/drivers/clk/sifive/fu540-prci.c @@ -586,7 +586,10 @@ static int sifive_fu540_prci_probe(struct platform_device *pdev) struct __prci_data *pd; int r; - pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); + pd = devm_kzalloc(dev, + struct_size(pd, hw_clks.hws, + ARRAY_SIZE(__prci_init_clocks)), + GFP_KERNEL); if (!pd) return -ENOMEM; From e93b327dbf3d37f0dfb123b58f9627ad17be652e Mon Sep 17 00:00:00 2001 From: Vincent Chen Date: Tue, 23 Jun 2020 13:40:21 +0800 Subject: [PATCH 496/618] riscv: Add extern declarations for vDSO time-related functions Add extern declarations for vDSO time-related functions to notify the compiler these functions will be used in somewhere to avoid "no previous prototype" compile warning. Reported-by: kernel test robot Signed-off-by: Vincent Chen Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/vdso/vgettimeofday.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/riscv/kernel/vdso/vgettimeofday.c b/arch/riscv/kernel/vdso/vgettimeofday.c index d264943e2e47..cc0d80699c31 100644 --- a/arch/riscv/kernel/vdso/vgettimeofday.c +++ b/arch/riscv/kernel/vdso/vgettimeofday.c @@ -9,16 +9,22 @@ #include #include +extern +int __vdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts); int __vdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts) { return __cvdso_clock_gettime(clock, ts); } +extern +int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz); int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz) { return __cvdso_gettimeofday(tv, tz); } +extern +int __vdso_clock_getres(clockid_t clock_id, struct __kernel_timespec *res); int __vdso_clock_getres(clockid_t clock_id, struct __kernel_timespec *res) { return __cvdso_clock_getres(clock_id, res); From 502035e284cc7e9efef22b01771d822d49698ab9 Mon Sep 17 00:00:00 2001 From: Eddie James Date: Tue, 9 Jun 2020 15:15:54 -0500 Subject: [PATCH 497/618] i2c: fsi: Fix the port number field in status register The port number field in the status register was not correct, so fix it. Fixes: d6ffb6300116 ("i2c: Add FSI-attached I2C master algorithm") Signed-off-by: Eddie James Signed-off-by: Joel Stanley Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-fsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c index e0c256922d4f..977d6f524649 100644 --- a/drivers/i2c/busses/i2c-fsi.c +++ b/drivers/i2c/busses/i2c-fsi.c @@ -98,7 +98,7 @@ #define I2C_STAT_DAT_REQ BIT(25) #define I2C_STAT_CMD_COMP BIT(24) #define I2C_STAT_STOP_ERR BIT(23) -#define I2C_STAT_MAX_PORT GENMASK(19, 16) +#define I2C_STAT_MAX_PORT GENMASK(22, 16) #define I2C_STAT_ANY_INT BIT(15) #define I2C_STAT_SCL_IN BIT(11) #define I2C_STAT_SDA_IN BIT(10) From e05d57dcb8c71492268ff46ba9bfe9a9cfb1f95d Mon Sep 17 00:00:00 2001 From: Guo Ren Date: Tue, 23 Jun 2020 09:50:54 +0000 Subject: [PATCH 498/618] riscv: Fixup __vdso_gettimeofday broke dynamic ftrace For linux-5.8-rc1, enable ftrace of riscv will cause boot panic: [ 2.388980] Run /sbin/init as init process [ 2.529938] init[39]: unhandled signal 4 code 0x1 at 0x0000003ff449e000 [ 2.531078] CPU: 0 PID: 39 Comm: init Not tainted 5.8.0-rc1-dirty #13 [ 2.532719] epc: 0000003ff449e000 ra : 0000003ff449e954 sp : 0000003fffedb900 [ 2.534005] gp : 00000000000e8528 tp : 0000003ff449d800 t0 : 000000000000001e [ 2.534965] t1 : 000000000000000a t2 : 0000003fffedb89e s0 : 0000003fffedb920 [ 2.536279] s1 : 0000003fffedb940 a0 : 0000003ff43d4b2c a1 : 0000000000000000 [ 2.537334] a2 : 0000000000000001 a3 : 0000000000000000 a4 : fffffffffbad8000 [ 2.538466] a5 : 0000003ff449e93a a6 : 0000000000000000 a7 : 0000000000000000 [ 2.539511] s2 : 0000000000000000 s3 : 0000003ff448412c s4 : 0000000000000010 [ 2.541260] s5 : 0000000000000016 s6 : 00000000000d0a30 s7 : 0000003fffedba70 [ 2.542152] s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000003fffedb960 [ 2.543335] s11: 0000000000000000 t3 : 0000000000000000 t4 : 0000003fffedb8a0 [ 2.544471] t5 : 0000000000000000 t6 : 0000000000000000 [ 2.545730] status: 0000000000004020 badaddr: 00000000464c457f cause: 0000000000000002 [ 2.549867] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 2.551267] CPU: 0 PID: 1 Comm: init Not tainted 5.8.0-rc1-dirty #13 [ 2.552061] Call Trace: [ 2.552626] [] walk_stackframe+0x0/0xc4 [ 2.553486] [] show_stack+0x40/0x4c [ 2.553995] [] dump_stack+0x7a/0x98 [ 2.554615] [] panic+0x114/0x2f4 [ 2.555395] [] do_exit+0x89c/0x8c2 [ 2.555949] [] do_group_exit+0x3a/0x90 [ 2.556715] [] get_signal+0xe2/0x6e6 [ 2.557388] [] do_notify_resume+0x6a/0x37a [ 2.558089] [] ret_from_exception+0x0/0xc "ra:0x3ff449e954" is the return address of "call _mcount" in the prologue of __vdso_gettimeofday(). Without proper relocate, pc jmp to 0x0000003ff449e000 (vdso map base) with a illegal instruction trap. The solution comes from arch/arm64/kernel/vdso/Makefile: CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS) - CC_FLAGS_SCS is ShadowCallStack feature in Clang and only implemented for arm64, no use for riscv. Fixes: ad5d1122b82f ("riscv: use vDSO common flow to reduce the latency of the time-related functions") Cc: stable@vger.kernel.org Signed-off-by: Guo Ren Reviewed-by: Vincent Chen Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/vdso/Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile index 29cf052f6541..e4c7c2c8a02f 100644 --- a/arch/riscv/kernel/vdso/Makefile +++ b/arch/riscv/kernel/vdso/Makefile @@ -27,6 +27,9 @@ obj-vdso := $(addprefix $(obj)/, $(obj-vdso)) obj-y += vdso.o vdso-syms.o CPPFLAGS_vdso.lds += -P -C -U$(ARCH) +# Disable -pg to prevent insert call site +CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os + # Disable gcov profiling for VDSO code GCOV_PROFILE := n From 0eaf228d574bd82a9aed73e3953bfb81721f4227 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Wed, 24 Jun 2020 13:08:17 +0300 Subject: [PATCH 499/618] net: macb: call pm_runtime_put_sync on failure path Call pm_runtime_put_sync() on failure path of at91ether_open. Fixes: e6a41c23df0d ("net: macb: ensure interface is not suspended on at91rm9200") Signed-off-by: Claudiu Beznea Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 257c4920cb88..5705359a3612 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -3837,7 +3837,7 @@ static int at91ether_open(struct net_device *dev) ret = at91ether_start(dev); if (ret) - return ret; + goto pm_exit; /* Enable MAC interrupts */ macb_writel(lp, IER, MACB_BIT(RCOMP) | @@ -3850,11 +3850,15 @@ static int at91ether_open(struct net_device *dev) ret = macb_phylink_connect(lp); if (ret) - return ret; + goto pm_exit; netif_start_queue(dev); return 0; + +pm_exit: + pm_runtime_put_sync(&lp->pdev->dev); + return ret; } /* Close the interface */ From 33fdef24c9ac20c68b71b363e423fbf9ad2bfc1e Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Wed, 24 Jun 2020 13:08:18 +0300 Subject: [PATCH 500/618] net: macb: free resources on failure path of at91ether_open() DMA buffers were not freed on failure path of at91ether_open(). Along with changes for freeing the DMA buffers the enable/disable interrupt instructions were moved to at91ether_start()/at91ether_stop() functions and the operations on at91ether_stop() were done in their reverse order (compared with how is done in at91ether_start()): before this patch the operation order on interface open path was as follows: 1/ alloc DMA buffers 2/ enable tx, rx 3/ enable interrupts and the order on interface close path was as follows: 1/ disable tx, rx 2/ disable interrupts 3/ free dma buffers. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Claudiu Beznea Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 116 ++++++++++++++--------- 1 file changed, 73 insertions(+), 43 deletions(-) diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 5705359a3612..52582e8ed90e 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -3762,15 +3762,9 @@ static int macb_init(struct platform_device *pdev) static struct sifive_fu540_macb_mgmt *mgmt; -/* Initialize and start the Receiver and Transmit subsystems */ -static int at91ether_start(struct net_device *dev) +static int at91ether_alloc_coherent(struct macb *lp) { - struct macb *lp = netdev_priv(dev); struct macb_queue *q = &lp->queues[0]; - struct macb_dma_desc *desc; - dma_addr_t addr; - u32 ctl; - int i; q->rx_ring = dma_alloc_coherent(&lp->pdev->dev, (AT91ETHER_MAX_RX_DESCR * @@ -3792,6 +3786,43 @@ static int at91ether_start(struct net_device *dev) return -ENOMEM; } + return 0; +} + +static void at91ether_free_coherent(struct macb *lp) +{ + struct macb_queue *q = &lp->queues[0]; + + if (q->rx_ring) { + dma_free_coherent(&lp->pdev->dev, + AT91ETHER_MAX_RX_DESCR * + macb_dma_desc_get_size(lp), + q->rx_ring, q->rx_ring_dma); + q->rx_ring = NULL; + } + + if (q->rx_buffers) { + dma_free_coherent(&lp->pdev->dev, + AT91ETHER_MAX_RX_DESCR * + AT91ETHER_MAX_RBUFF_SZ, + q->rx_buffers, q->rx_buffers_dma); + q->rx_buffers = NULL; + } +} + +/* Initialize and start the Receiver and Transmit subsystems */ +static int at91ether_start(struct macb *lp) +{ + struct macb_queue *q = &lp->queues[0]; + struct macb_dma_desc *desc; + dma_addr_t addr; + u32 ctl; + int i, ret; + + ret = at91ether_alloc_coherent(lp); + if (ret) + return ret; + addr = q->rx_buffers_dma; for (i = 0; i < AT91ETHER_MAX_RX_DESCR; i++) { desc = macb_rx_desc(q, i); @@ -3813,9 +3844,39 @@ static int at91ether_start(struct net_device *dev) ctl = macb_readl(lp, NCR); macb_writel(lp, NCR, ctl | MACB_BIT(RE) | MACB_BIT(TE)); + /* Enable MAC interrupts */ + macb_writel(lp, IER, MACB_BIT(RCOMP) | + MACB_BIT(RXUBR) | + MACB_BIT(ISR_TUND) | + MACB_BIT(ISR_RLE) | + MACB_BIT(TCOMP) | + MACB_BIT(ISR_ROVR) | + MACB_BIT(HRESP)); + return 0; } +static void at91ether_stop(struct macb *lp) +{ + u32 ctl; + + /* Disable MAC interrupts */ + macb_writel(lp, IDR, MACB_BIT(RCOMP) | + MACB_BIT(RXUBR) | + MACB_BIT(ISR_TUND) | + MACB_BIT(ISR_RLE) | + MACB_BIT(TCOMP) | + MACB_BIT(ISR_ROVR) | + MACB_BIT(HRESP)); + + /* Disable Receiver and Transmitter */ + ctl = macb_readl(lp, NCR); + macb_writel(lp, NCR, ctl & ~(MACB_BIT(TE) | MACB_BIT(RE))); + + /* Free resources. */ + at91ether_free_coherent(lp); +} + /* Open the ethernet interface */ static int at91ether_open(struct net_device *dev) { @@ -3835,27 +3896,20 @@ static int at91ether_open(struct net_device *dev) macb_set_hwaddr(lp); - ret = at91ether_start(dev); + ret = at91ether_start(lp); if (ret) goto pm_exit; - /* Enable MAC interrupts */ - macb_writel(lp, IER, MACB_BIT(RCOMP) | - MACB_BIT(RXUBR) | - MACB_BIT(ISR_TUND) | - MACB_BIT(ISR_RLE) | - MACB_BIT(TCOMP) | - MACB_BIT(ISR_ROVR) | - MACB_BIT(HRESP)); - ret = macb_phylink_connect(lp); if (ret) - goto pm_exit; + goto stop; netif_start_queue(dev); return 0; +stop: + at91ether_stop(lp); pm_exit: pm_runtime_put_sync(&lp->pdev->dev); return ret; @@ -3865,37 +3919,13 @@ static int at91ether_open(struct net_device *dev) static int at91ether_close(struct net_device *dev) { struct macb *lp = netdev_priv(dev); - struct macb_queue *q = &lp->queues[0]; - u32 ctl; - - /* Disable Receiver and Transmitter */ - ctl = macb_readl(lp, NCR); - macb_writel(lp, NCR, ctl & ~(MACB_BIT(TE) | MACB_BIT(RE))); - - /* Disable MAC interrupts */ - macb_writel(lp, IDR, MACB_BIT(RCOMP) | - MACB_BIT(RXUBR) | - MACB_BIT(ISR_TUND) | - MACB_BIT(ISR_RLE) | - MACB_BIT(TCOMP) | - MACB_BIT(ISR_ROVR) | - MACB_BIT(HRESP)); netif_stop_queue(dev); phylink_stop(lp->phylink); phylink_disconnect_phy(lp->phylink); - dma_free_coherent(&lp->pdev->dev, - AT91ETHER_MAX_RX_DESCR * - macb_dma_desc_get_size(lp), - q->rx_ring, q->rx_ring_dma); - q->rx_ring = NULL; - - dma_free_coherent(&lp->pdev->dev, - AT91ETHER_MAX_RX_DESCR * AT91ETHER_MAX_RBUFF_SZ, - q->rx_buffers, q->rx_buffers_dma); - q->rx_buffers = NULL; + at91ether_stop(lp); return pm_runtime_put(&lp->pdev->dev); } From c17d1a3a8ee4dac7539d5c976b45d9300f6f10bc Mon Sep 17 00:00:00 2001 From: Weilong Chen Date: Tue, 23 Jun 2020 12:12:40 +0800 Subject: [PATCH 501/618] fork: annotate data race in copy_process() KCSAN reported data race reading and writing nr_threads and max_threads. The data race is intentional and benign. This is obvious from the comment above it and based on general consensus when discussing this issue. So there's no need for any heavy atomic or *_ONCE() machinery here. In accordance with the newly introduced data_race() annotation consensus, mark the offending line with data_race(). Here it's actually useful not just to silence KCSAN but to also clearly communicate that the race is intentional. This is especially helpful since nr_threads is otherwise protected by tasklist_lock. BUG: KCSAN: data-race in copy_process / copy_process write to 0xffffffff86205cf8 of 4 bytes by task 14779 on cpu 1: copy_process+0x2eba/0x3c40 kernel/fork.c:2273 _do_fork+0xfe/0x7a0 kernel/fork.c:2421 __do_sys_clone kernel/fork.c:2576 [inline] __se_sys_clone kernel/fork.c:2557 [inline] __x64_sys_clone+0x130/0x170 kernel/fork.c:2557 do_syscall_64+0xcc/0x3a0 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x44/0xa9 read to 0xffffffff86205cf8 of 4 bytes by task 6944 on cpu 0: copy_process+0x94d/0x3c40 kernel/fork.c:1954 _do_fork+0xfe/0x7a0 kernel/fork.c:2421 __do_sys_clone kernel/fork.c:2576 [inline] __se_sys_clone kernel/fork.c:2557 [inline] __x64_sys_clone+0x130/0x170 kernel/fork.c:2557 do_syscall_64+0xcc/0x3a0 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Link: https://groups.google.com/forum/#!msg/syzkaller-upstream-mo deration/thvp7AHs5Ew/aPdYLXfYBQAJ Reported-by: syzbot+52fced2d288f8ecd2b20@syzkaller.appspotmail.com Signed-off-by: Zefan Li Signed-off-by: Weilong Chen Acked-by: Christian Brauner Cc: Qian Cai Cc: Oleg Nesterov Cc: Christian Brauner Cc: Marco Elver [christian.brauner@ubuntu.com: rewrite commit message] Link: https://lore.kernel.org/r/20200623041240.154294-1-chenweilong@huawei.com Signed-off-by: Christian Brauner --- kernel/fork.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/fork.c b/kernel/fork.c index 142b23645d82..efc5493203ae 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1977,7 +1977,7 @@ static __latent_entropy struct task_struct *copy_process( * to stop root fork bombs. */ retval = -EAGAIN; - if (nr_threads >= max_threads) + if (data_race(nr_threads >= max_threads)) goto bad_fork_cleanup_count; delayacct_tsk_init(p); /* Must remain after dup_task_struct() */ From e39109f59614e5646e6c53100a3e7e8f63dd1d2b Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 24 Jun 2020 16:54:44 +0300 Subject: [PATCH 502/618] net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top It turns out that sja1105_compose_gating_subschedule must also be called from sja1105_vl_delete, to recalculate the overall tc-gate configuration. Currently this is not possible without introducing a forward declaration. So move the function at the top of the file, along with its dependencies. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_vl.c | 320 +++++++++++++-------------- 1 file changed, 160 insertions(+), 160 deletions(-) diff --git a/drivers/net/dsa/sja1105/sja1105_vl.c b/drivers/net/dsa/sja1105/sja1105_vl.c index 0056f9c1e471..5ffa71f02064 100644 --- a/drivers/net/dsa/sja1105/sja1105_vl.c +++ b/drivers/net/dsa/sja1105/sja1105_vl.c @@ -7,6 +7,166 @@ #define SJA1105_SIZE_VL_STATUS 8 +/* Insert into the global gate list, sorted by gate action time. */ +static int sja1105_insert_gate_entry(struct sja1105_gating_config *gating_cfg, + struct sja1105_rule *rule, + u8 gate_state, s64 entry_time, + struct netlink_ext_ack *extack) +{ + struct sja1105_gate_entry *e; + int rc; + + e = kzalloc(sizeof(*e), GFP_KERNEL); + if (!e) + return -ENOMEM; + + e->rule = rule; + e->gate_state = gate_state; + e->interval = entry_time; + + if (list_empty(&gating_cfg->entries)) { + list_add(&e->list, &gating_cfg->entries); + } else { + struct sja1105_gate_entry *p; + + list_for_each_entry(p, &gating_cfg->entries, list) { + if (p->interval == e->interval) { + NL_SET_ERR_MSG_MOD(extack, + "Gate conflict"); + rc = -EBUSY; + goto err; + } + + if (e->interval < p->interval) + break; + } + list_add(&e->list, p->list.prev); + } + + gating_cfg->num_entries++; + + return 0; +err: + kfree(e); + return rc; +} + +/* The gate entries contain absolute times in their e->interval field. Convert + * that to proper intervals (i.e. "0, 5, 10, 15" to "5, 5, 5, 5"). + */ +static void +sja1105_gating_cfg_time_to_interval(struct sja1105_gating_config *gating_cfg, + u64 cycle_time) +{ + struct sja1105_gate_entry *last_e; + struct sja1105_gate_entry *e; + struct list_head *prev; + + list_for_each_entry(e, &gating_cfg->entries, list) { + struct sja1105_gate_entry *p; + + prev = e->list.prev; + + if (prev == &gating_cfg->entries) + continue; + + p = list_entry(prev, struct sja1105_gate_entry, list); + p->interval = e->interval - p->interval; + } + last_e = list_last_entry(&gating_cfg->entries, + struct sja1105_gate_entry, list); + if (last_e->list.prev != &gating_cfg->entries) + last_e->interval = cycle_time - last_e->interval; +} + +static void sja1105_free_gating_config(struct sja1105_gating_config *gating_cfg) +{ + struct sja1105_gate_entry *e, *n; + + list_for_each_entry_safe(e, n, &gating_cfg->entries, list) { + list_del(&e->list); + kfree(e); + } +} + +static int sja1105_compose_gating_subschedule(struct sja1105_private *priv, + struct netlink_ext_ack *extack) +{ + struct sja1105_gating_config *gating_cfg = &priv->tas_data.gating_cfg; + struct sja1105_rule *rule; + s64 max_cycle_time = 0; + s64 its_base_time = 0; + int i, rc = 0; + + list_for_each_entry(rule, &priv->flow_block.rules, list) { + if (rule->type != SJA1105_RULE_VL) + continue; + if (rule->vl.type != SJA1105_VL_TIME_TRIGGERED) + continue; + + if (max_cycle_time < rule->vl.cycle_time) { + max_cycle_time = rule->vl.cycle_time; + its_base_time = rule->vl.base_time; + } + } + + if (!max_cycle_time) + return 0; + + dev_dbg(priv->ds->dev, "max_cycle_time %lld its_base_time %lld\n", + max_cycle_time, its_base_time); + + sja1105_free_gating_config(gating_cfg); + + gating_cfg->base_time = its_base_time; + gating_cfg->cycle_time = max_cycle_time; + gating_cfg->num_entries = 0; + + list_for_each_entry(rule, &priv->flow_block.rules, list) { + s64 time; + s64 rbt; + + if (rule->type != SJA1105_RULE_VL) + continue; + if (rule->vl.type != SJA1105_VL_TIME_TRIGGERED) + continue; + + /* Calculate the difference between this gating schedule's + * base time, and the base time of the gating schedule with the + * longest cycle time. We call it the relative base time (rbt). + */ + rbt = future_base_time(rule->vl.base_time, rule->vl.cycle_time, + its_base_time); + rbt -= its_base_time; + + time = rbt; + + for (i = 0; i < rule->vl.num_entries; i++) { + u8 gate_state = rule->vl.entries[i].gate_state; + s64 entry_time = time; + + while (entry_time < max_cycle_time) { + rc = sja1105_insert_gate_entry(gating_cfg, rule, + gate_state, + entry_time, + extack); + if (rc) + goto err; + + entry_time += rule->vl.cycle_time; + } + time += rule->vl.entries[i].interval; + } + } + + sja1105_gating_cfg_time_to_interval(gating_cfg, max_cycle_time); + + return 0; +err: + sja1105_free_gating_config(gating_cfg); + return rc; +} + /* The switch flow classification core implements TTEthernet, which 'thinks' in * terms of Virtual Links (VL), a concept borrowed from ARINC 664 part 7. * However it also has one other operating mode (VLLUPFORMAT=0) where it acts @@ -397,166 +557,6 @@ int sja1105_vl_delete(struct sja1105_private *priv, int port, return sja1105_static_config_reload(priv, SJA1105_VIRTUAL_LINKS); } -/* Insert into the global gate list, sorted by gate action time. */ -static int sja1105_insert_gate_entry(struct sja1105_gating_config *gating_cfg, - struct sja1105_rule *rule, - u8 gate_state, s64 entry_time, - struct netlink_ext_ack *extack) -{ - struct sja1105_gate_entry *e; - int rc; - - e = kzalloc(sizeof(*e), GFP_KERNEL); - if (!e) - return -ENOMEM; - - e->rule = rule; - e->gate_state = gate_state; - e->interval = entry_time; - - if (list_empty(&gating_cfg->entries)) { - list_add(&e->list, &gating_cfg->entries); - } else { - struct sja1105_gate_entry *p; - - list_for_each_entry(p, &gating_cfg->entries, list) { - if (p->interval == e->interval) { - NL_SET_ERR_MSG_MOD(extack, - "Gate conflict"); - rc = -EBUSY; - goto err; - } - - if (e->interval < p->interval) - break; - } - list_add(&e->list, p->list.prev); - } - - gating_cfg->num_entries++; - - return 0; -err: - kfree(e); - return rc; -} - -/* The gate entries contain absolute times in their e->interval field. Convert - * that to proper intervals (i.e. "0, 5, 10, 15" to "5, 5, 5, 5"). - */ -static void -sja1105_gating_cfg_time_to_interval(struct sja1105_gating_config *gating_cfg, - u64 cycle_time) -{ - struct sja1105_gate_entry *last_e; - struct sja1105_gate_entry *e; - struct list_head *prev; - - list_for_each_entry(e, &gating_cfg->entries, list) { - struct sja1105_gate_entry *p; - - prev = e->list.prev; - - if (prev == &gating_cfg->entries) - continue; - - p = list_entry(prev, struct sja1105_gate_entry, list); - p->interval = e->interval - p->interval; - } - last_e = list_last_entry(&gating_cfg->entries, - struct sja1105_gate_entry, list); - if (last_e->list.prev != &gating_cfg->entries) - last_e->interval = cycle_time - last_e->interval; -} - -static void sja1105_free_gating_config(struct sja1105_gating_config *gating_cfg) -{ - struct sja1105_gate_entry *e, *n; - - list_for_each_entry_safe(e, n, &gating_cfg->entries, list) { - list_del(&e->list); - kfree(e); - } -} - -static int sja1105_compose_gating_subschedule(struct sja1105_private *priv, - struct netlink_ext_ack *extack) -{ - struct sja1105_gating_config *gating_cfg = &priv->tas_data.gating_cfg; - struct sja1105_rule *rule; - s64 max_cycle_time = 0; - s64 its_base_time = 0; - int i, rc = 0; - - list_for_each_entry(rule, &priv->flow_block.rules, list) { - if (rule->type != SJA1105_RULE_VL) - continue; - if (rule->vl.type != SJA1105_VL_TIME_TRIGGERED) - continue; - - if (max_cycle_time < rule->vl.cycle_time) { - max_cycle_time = rule->vl.cycle_time; - its_base_time = rule->vl.base_time; - } - } - - if (!max_cycle_time) - return 0; - - dev_dbg(priv->ds->dev, "max_cycle_time %lld its_base_time %lld\n", - max_cycle_time, its_base_time); - - sja1105_free_gating_config(gating_cfg); - - gating_cfg->base_time = its_base_time; - gating_cfg->cycle_time = max_cycle_time; - gating_cfg->num_entries = 0; - - list_for_each_entry(rule, &priv->flow_block.rules, list) { - s64 time; - s64 rbt; - - if (rule->type != SJA1105_RULE_VL) - continue; - if (rule->vl.type != SJA1105_VL_TIME_TRIGGERED) - continue; - - /* Calculate the difference between this gating schedule's - * base time, and the base time of the gating schedule with the - * longest cycle time. We call it the relative base time (rbt). - */ - rbt = future_base_time(rule->vl.base_time, rule->vl.cycle_time, - its_base_time); - rbt -= its_base_time; - - time = rbt; - - for (i = 0; i < rule->vl.num_entries; i++) { - u8 gate_state = rule->vl.entries[i].gate_state; - s64 entry_time = time; - - while (entry_time < max_cycle_time) { - rc = sja1105_insert_gate_entry(gating_cfg, rule, - gate_state, - entry_time, - extack); - if (rc) - goto err; - - entry_time += rule->vl.cycle_time; - } - time += rule->vl.entries[i].interval; - } - } - - sja1105_gating_cfg_time_to_interval(gating_cfg, max_cycle_time); - - return 0; -err: - sja1105_free_gating_config(gating_cfg); - return rc; -} - int sja1105_vl_gate(struct sja1105_private *priv, int port, struct netlink_ext_ack *extack, unsigned long cookie, struct sja1105_key *key, u32 index, s32 prio, From 026bdb2b96525edd1fb5cc6f24587ff08d277d5c Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 24 Jun 2020 16:54:45 +0300 Subject: [PATCH 503/618] net: dsa: sja1105: unconditionally free old gating config Currently sja1105_compose_gating_subschedule is not prepared to be called for the case where we want to recompute the global tc-gate configuration after we've deleted those actions on a port. After deleting the tc-gate actions on the last port, max_cycle_time would become zero, and that would incorrectly prevent sja1105_free_gating_config from getting called. So move the freeing function above the check for the need to apply a new configuration. Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_vl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/sja1105/sja1105_vl.c b/drivers/net/dsa/sja1105/sja1105_vl.c index 5ffa71f02064..5ff370f507e6 100644 --- a/drivers/net/dsa/sja1105/sja1105_vl.c +++ b/drivers/net/dsa/sja1105/sja1105_vl.c @@ -98,6 +98,8 @@ static int sja1105_compose_gating_subschedule(struct sja1105_private *priv, s64 its_base_time = 0; int i, rc = 0; + sja1105_free_gating_config(gating_cfg); + list_for_each_entry(rule, &priv->flow_block.rules, list) { if (rule->type != SJA1105_RULE_VL) continue; @@ -116,8 +118,6 @@ static int sja1105_compose_gating_subschedule(struct sja1105_private *priv, dev_dbg(priv->ds->dev, "max_cycle_time %lld its_base_time %lld\n", max_cycle_time, its_base_time); - sja1105_free_gating_config(gating_cfg); - gating_cfg->base_time = its_base_time; gating_cfg->cycle_time = max_cycle_time; gating_cfg->num_entries = 0; From 82f6896a25ee2471fdf039eb7b286a692d78f504 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 24 Jun 2020 16:54:46 +0300 Subject: [PATCH 504/618] net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules Currently, tas_data->enabled would remain true even after deleting all tc-gate rules from the switch ports, which would cause the sja1105_tas_state_machine to get unnecessarily scheduled. Also, if there were any errors which would prevent the hardware from enabling the gating schedule, the sja1105_tas_state_machine would continuously detect and print that, spamming the kernel log, even if the rules were subsequently deleted. The rules themselves are _not_ active, because sja1105_init_scheduling does enough of a job to not install the gating schedule in the static config. But the virtual link rules themselves are still present. So call the functions that remove the tc-gate configuration from priv->tas_data.gating_cfg, so that tas_data->enabled can be set to false, and sja1105_tas_state_machine will stop from being scheduled. Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_vl.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/dsa/sja1105/sja1105_vl.c b/drivers/net/dsa/sja1105/sja1105_vl.c index 5ff370f507e6..6b1fdc1b46e7 100644 --- a/drivers/net/dsa/sja1105/sja1105_vl.c +++ b/drivers/net/dsa/sja1105/sja1105_vl.c @@ -550,10 +550,18 @@ int sja1105_vl_delete(struct sja1105_private *priv, int port, kfree(rule); } + rc = sja1105_compose_gating_subschedule(priv, extack); + if (rc) + return rc; + rc = sja1105_init_virtual_links(priv, extack); if (rc) return rc; + rc = sja1105_init_scheduling(priv); + if (rc < 0) + return rc; + return sja1105_static_config_reload(priv, SJA1105_VIRTUAL_LINKS); } From 43ce887c5050a3c213450a3058505f6a06519dd4 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 24 Jun 2020 16:54:47 +0300 Subject: [PATCH 505/618] net: dsa: sja1105: fix tc-gate schedule with single element The sja1105_gating_cfg_time_to_interval function does this, as per the comments: /* The gate entries contain absolute times in their e->interval field. Convert * that to proper intervals (i.e. "0, 5, 10, 15" to "5, 5, 5, 5"). */ To perform that task, it iterates over gating_cfg->entries, at each step updating the interval of the _previous_ entry. So one interval remains to be updated at the end of the loop: the last one (since it isn't "prev" for anyone else). But there was an erroneous check, that the last element's interval should not be updated if it's also the only element. I'm not quite sure why that check was there, but it's clearly incorrect, as a tc-gate schedule with a single element would get an e->interval of zero, regardless of the duration requested by the user. The switch wouldn't even consider this configuration as valid: it will just drop all traffic that matches the rule. Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links") Reported-by: Xiaoliang Yang Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_vl.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/dsa/sja1105/sja1105_vl.c b/drivers/net/dsa/sja1105/sja1105_vl.c index 6b1fdc1b46e7..af3565160db6 100644 --- a/drivers/net/dsa/sja1105/sja1105_vl.c +++ b/drivers/net/dsa/sja1105/sja1105_vl.c @@ -75,8 +75,7 @@ sja1105_gating_cfg_time_to_interval(struct sja1105_gating_config *gating_cfg, } last_e = list_last_entry(&gating_cfg->entries, struct sja1105_gate_entry, list); - if (last_e->list.prev != &gating_cfg->entries) - last_e->interval = cycle_time - last_e->interval; + last_e->interval = cycle_time - last_e->interval; } static void sja1105_free_gating_config(struct sja1105_gating_config *gating_cfg) From b344579ca8478598937215f7005d6c7b84d28aee Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Wed, 24 Jun 2020 12:42:02 -0400 Subject: [PATCH 506/618] tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an ACK when the minimum rtt of a connection goes down. From inspection it is clear from the existing code that this could happen in an example like the following: o The first 8 RTT samples in a round trip are 150ms, resulting in a curr_rtt of 150ms and a delay_min of 150ms. o The 9th RTT sample is 100ms. The curr_rtt does not change after the first 8 samples, so curr_rtt remains 150ms. But delay_min can be lowered at any time, so delay_min falls to 100ms. The code executes the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min of 100ms, and the curr_rtt is declared far enough above delay_min to force a (spurious) exit of Slow start. The fix here is simple: allow every RTT sample in a round trip to lower the curr_rtt. Fixes: ae27e98a5152 ("[TCP] CUBIC v2.3") Reported-by: Mirja Kuehlewind Signed-off-by: Neal Cardwell Signed-off-by: Eric Dumazet Acked-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller --- net/ipv4/tcp_cubic.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp_cubic.c b/net/ipv4/tcp_cubic.c index 8f8eefd3a3ce..c7bf5b26bf0c 100644 --- a/net/ipv4/tcp_cubic.c +++ b/net/ipv4/tcp_cubic.c @@ -432,10 +432,9 @@ static void hystart_update(struct sock *sk, u32 delay) if (hystart_detect & HYSTART_DELAY) { /* obtain the minimum delay of more than sampling packets */ + if (ca->curr_rtt > delay) + ca->curr_rtt = delay; if (ca->sample_cnt < HYSTART_MIN_SAMPLES) { - if (ca->curr_rtt > delay) - ca->curr_rtt = delay; - ca->sample_cnt++; } else { if (ca->curr_rtt > ca->delay_min + From 7d21d54d624777358ab6c7be7ff778808fef70ba Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Wed, 24 Jun 2020 12:42:03 -0400 Subject: [PATCH 507/618] bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT Apply the fix from: "tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT" to the BPF implementation of TCP CUBIC congestion control. Repeating the commit description here for completeness: Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an ACK when the minimum rtt of a connection goes down. From inspection it is clear from the existing code that this could happen in an example like the following: o The first 8 RTT samples in a round trip are 150ms, resulting in a curr_rtt of 150ms and a delay_min of 150ms. o The 9th RTT sample is 100ms. The curr_rtt does not change after the first 8 samples, so curr_rtt remains 150ms. But delay_min can be lowered at any time, so delay_min falls to 100ms. The code executes the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min of 100ms, and the curr_rtt is declared far enough above delay_min to force a (spurious) exit of Slow start. The fix here is simple: allow every RTT sample in a round trip to lower the curr_rtt. Fixes: 6de4a9c430b5 ("bpf: tcp: Add bpf_cubic example") Reported-by: Mirja Kuehlewind Signed-off-by: Neal Cardwell Signed-off-by: Eric Dumazet Acked-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller --- tools/testing/selftests/bpf/progs/bpf_cubic.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/bpf/progs/bpf_cubic.c b/tools/testing/selftests/bpf/progs/bpf_cubic.c index 7897c8f4d363..ef574087f1e1 100644 --- a/tools/testing/selftests/bpf/progs/bpf_cubic.c +++ b/tools/testing/selftests/bpf/progs/bpf_cubic.c @@ -480,10 +480,9 @@ static __always_inline void hystart_update(struct sock *sk, __u32 delay) if (hystart_detect & HYSTART_DELAY) { /* obtain the minimum delay of more than sampling packets */ + if (ca->curr_rtt > delay) + ca->curr_rtt = delay; if (ca->sample_cnt < HYSTART_MIN_SAMPLES) { - if (ca->curr_rtt > delay) - ca->curr_rtt = delay; - ca->sample_cnt++; } else { if (ca->curr_rtt > ca->delay_min + From b6186d413b1d50f45fe2415d760947576ef3691a Mon Sep 17 00:00:00 2001 From: Briana Oursler Date: Wed, 24 Jun 2020 12:29:14 -0700 Subject: [PATCH 508/618] tc-testing: avoid action cookies with odd length. Update odd length cookie hexstrings in csum.json, tunnel_key.json and bpf.json to be even length to comply with check enforced in commit 0149dabf2a1b ("tc: m_actions: check cookie hexstring len") in iproute2. Signed-off-by: Briana Oursler Reviewed-by: Stefano Brivio Reviewed-by: Davide Caratti Signed-off-by: David S. Miller --- .../testing/selftests/tc-testing/tc-tests/actions/bpf.json | 4 ++-- .../testing/selftests/tc-testing/tc-tests/actions/csum.json | 4 ++-- .../selftests/tc-testing/tc-tests/actions/tunnel_key.json | 6 +++--- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/bpf.json b/tools/testing/selftests/tc-testing/tc-tests/actions/bpf.json index 47a3082b6661..503982b8f295 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/bpf.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/bpf.json @@ -260,10 +260,10 @@ 255 ] ], - "cmdUnderTest": "$TC action add action bpf bytecode '4,40 0 0 12,21 0 1 2054,6 0 0 262144,6 0 0 0' index 4294967296 cookie 12345", + "cmdUnderTest": "$TC action add action bpf bytecode '4,40 0 0 12,21 0 1 2054,6 0 0 262144,6 0 0 0' index 4294967296 cookie 123456", "expExitCode": "255", "verifyCmd": "$TC action ls action bpf", - "matchPattern": "action order [0-9]*: bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' default-action pipe.*cookie 12345", + "matchPattern": "action order [0-9]*: bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' default-action pipe.*cookie 123456", "matchCount": "0", "teardown": [ "$TC action flush action bpf" diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/csum.json b/tools/testing/selftests/tc-testing/tc-tests/actions/csum.json index 88ec134872e4..072febf25f55 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/csum.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/csum.json @@ -469,7 +469,7 @@ 255 ] ], - "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action csum tcp continue index \\$i cookie aaabbbcccdddeee \\\"; args=\"\\$args\\$cmd\"; done && $TC actions add \\$args\"", + "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action csum tcp continue index \\$i cookie 123456789abcde \\\"; args=\"\\$args\\$cmd\"; done && $TC actions add \\$args\"", "expExitCode": "0", "verifyCmd": "$TC actions ls action csum", "matchPattern": "^[ \t]+index [0-9]* ref", @@ -492,7 +492,7 @@ 1, 255 ], - "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action csum tcp continue index \\$i cookie aaabbbcccdddeee \\\"; args=\"\\$args\\$cmd\"; done && $TC actions add \\$args\"" + "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action csum tcp continue index \\$i cookie 123456789abcde \\\"; args=\"\\$args\\$cmd\"; done && $TC actions add \\$args\"" ], "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action csum index \\$i \\\"; args=\"\\$args\\$cmd\"; done && $TC actions del \\$args\"", "expExitCode": "0", diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json b/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json index 7357c58fa2dc..d06346968bcb 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json @@ -818,12 +818,12 @@ 1, 255 ], - "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.20.2 dst_port 3128 nocsum id 1 index 1 cookie aabbccddeeff112233445566778800a" + "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.20.2 dst_port 3128 nocsum id 1 index 1 cookie 123456" ], - "cmdUnderTest": "$TC actions replace action tunnel_key set src_ip 11.11.11.1 dst_ip 21.21.21.2 dst_port 3129 id 11 csum reclassify index 1 cookie a1b1c1d1", + "cmdUnderTest": "$TC actions replace action tunnel_key set src_ip 11.11.11.1 dst_ip 21.21.21.2 dst_port 3129 id 11 csum reclassify index 1 cookie 123456", "expExitCode": "0", "verifyCmd": "$TC actions get action tunnel_key index 1", - "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 11.11.11.1.*dst_ip 21.21.21.2.*key_id 11.*dst_port 3129.*csum reclassify.*index 1.*cookie a1b1c1d1", + "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 11.11.11.1.*dst_ip 21.21.21.2.*key_id 11.*dst_port 3129.*csum reclassify.*index 1.*cookie 123456", "matchCount": "1", "teardown": [ "$TC actions flush action tunnel_key" From 471e39df96b9a4c4ba88a2da9e25a126624d7a9c Mon Sep 17 00:00:00 2001 From: Marcelo Ricardo Leitner Date: Wed, 24 Jun 2020 17:34:18 -0300 Subject: [PATCH 509/618] sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket If a socket is set ipv6only, it will still send IPv4 addresses in the INIT and INIT_ACK packets. This potentially misleads the peer into using them, which then would cause association termination. The fix is to not add IPv4 addresses to ipv6only sockets. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Corey Minyard Signed-off-by: Marcelo Ricardo Leitner Tested-by: Corey Minyard Signed-off-by: David S. Miller --- include/net/sctp/constants.h | 8 +++++--- net/sctp/associola.c | 5 ++++- net/sctp/bind_addr.c | 1 + net/sctp/protocol.c | 3 ++- 4 files changed, 12 insertions(+), 5 deletions(-) diff --git a/include/net/sctp/constants.h b/include/net/sctp/constants.h index 15b4d9aec7ff..122d9e2d8dfd 100644 --- a/include/net/sctp/constants.h +++ b/include/net/sctp/constants.h @@ -353,11 +353,13 @@ enum { ipv4_is_anycast_6to4(a)) /* Flags used for the bind address copy functions. */ -#define SCTP_ADDR6_ALLOWED 0x00000001 /* IPv6 address is allowed by +#define SCTP_ADDR4_ALLOWED 0x00000001 /* IPv4 address is allowed by local sock family */ -#define SCTP_ADDR4_PEERSUPP 0x00000002 /* IPv4 address is supported by +#define SCTP_ADDR6_ALLOWED 0x00000002 /* IPv6 address is allowed by + local sock family */ +#define SCTP_ADDR4_PEERSUPP 0x00000004 /* IPv4 address is supported by peer */ -#define SCTP_ADDR6_PEERSUPP 0x00000004 /* IPv6 address is supported by +#define SCTP_ADDR6_PEERSUPP 0x00000008 /* IPv6 address is supported by peer */ /* Reasons to retransmit. */ diff --git a/net/sctp/associola.c b/net/sctp/associola.c index 72315137d7e7..8d735461fa19 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -1565,12 +1565,15 @@ void sctp_assoc_rwnd_decrease(struct sctp_association *asoc, unsigned int len) int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *asoc, enum sctp_scope scope, gfp_t gfp) { + struct sock *sk = asoc->base.sk; int flags; /* Use scoping rules to determine the subset of addresses from * the endpoint. */ - flags = (PF_INET6 == asoc->base.sk->sk_family) ? SCTP_ADDR6_ALLOWED : 0; + flags = (PF_INET6 == sk->sk_family) ? SCTP_ADDR6_ALLOWED : 0; + if (!inet_v6_ipv6only(sk)) + flags |= SCTP_ADDR4_ALLOWED; if (asoc->peer.ipv4_address) flags |= SCTP_ADDR4_PEERSUPP; if (asoc->peer.ipv6_address) diff --git a/net/sctp/bind_addr.c b/net/sctp/bind_addr.c index 53bc61537f44..701c5a4e441d 100644 --- a/net/sctp/bind_addr.c +++ b/net/sctp/bind_addr.c @@ -461,6 +461,7 @@ static int sctp_copy_one_addr(struct net *net, struct sctp_bind_addr *dest, * well as the remote peer. */ if ((((AF_INET == addr->sa.sa_family) && + (flags & SCTP_ADDR4_ALLOWED) && (flags & SCTP_ADDR4_PEERSUPP))) || (((AF_INET6 == addr->sa.sa_family) && (flags & SCTP_ADDR6_ALLOWED) && diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 092d1afdee0d..cde29f3c7fb3 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -148,7 +148,8 @@ int sctp_copy_local_addr_list(struct net *net, struct sctp_bind_addr *bp, * sock as well as the remote peer. */ if (addr->a.sa.sa_family == AF_INET && - !(copy_flags & SCTP_ADDR4_PEERSUPP)) + (!(copy_flags & SCTP_ADDR4_ALLOWED) || + !(copy_flags & SCTP_ADDR4_PEERSUPP))) continue; if (addr->a.sa.sa_family == AF_INET6 && (!(copy_flags & SCTP_ADDR6_ALLOWED) || From b18e9834f7b248b41e8179a039ec80803bb3d67a Mon Sep 17 00:00:00 2001 From: Roopa Prabhu Date: Wed, 24 Jun 2020 14:02:36 -0700 Subject: [PATCH 510/618] vxlan: fix last fdb index during dump of fdb with nhid This patch fixes last saved fdb index in fdb dump handler when handling fdb's with nhid. Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries") Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index e8085ab6d484..89d85dcb200e 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1380,6 +1380,8 @@ static int vxlan_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb, struct vxlan_rdst *rd; if (rcu_access_pointer(f->nh)) { + if (*idx < cb->args[2]) + goto skip_nh; err = vxlan_fdb_info(skb, vxlan, f, NETLINK_CB(cb->skb).portid, cb->nlh->nlmsg_seq, @@ -1387,6 +1389,8 @@ static int vxlan_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb, NLM_F_MULTI, NULL); if (err < 0) goto out; +skip_nh: + *idx += 1; continue; } From df08126e3833e9dca19e2407db5f5860a7c194fb Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Wed, 24 Jun 2020 16:06:03 -0600 Subject: [PATCH 511/618] wireguard: receive: account for napi_gro_receive never returning GRO_DROP The napi_gro_receive function no longer returns GRO_DROP ever, making handling GRO_DROP dead code. This commit removes that dead code. Further, it's not even clear that device drivers have any business in taking action after passing off received packets; that's arguably out of their hands. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Fixes: 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()") Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller --- drivers/net/wireguard/receive.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireguard/receive.c b/drivers/net/wireguard/receive.c index 91438144e4f7..9b2ab6fc91cd 100644 --- a/drivers/net/wireguard/receive.c +++ b/drivers/net/wireguard/receive.c @@ -414,14 +414,8 @@ static void wg_packet_consume_data_done(struct wg_peer *peer, if (unlikely(routed_peer != peer)) goto dishonest_packet_peer; - if (unlikely(napi_gro_receive(&peer->napi, skb) == GRO_DROP)) { - ++dev->stats.rx_dropped; - net_dbg_ratelimited("%s: Failed to give packet to userspace from peer %llu (%pISpfsc)\n", - dev->name, peer->internal_id, - &peer->endpoint.addr); - } else { - update_rx_stats(peer, message_data_len(len_before_trim)); - } + napi_gro_receive(&peer->napi, skb); + update_rx_stats(peer, message_data_len(len_before_trim)); return; dishonest_packet_peer: From e5e7d8052f6140985c03bd49ebaa0af9c2944bc6 Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Wed, 24 Jun 2020 16:06:04 -0600 Subject: [PATCH 512/618] socionext: account for napi_gro_receive never returning GRO_DROP The napi_gro_receive function no longer returns GRO_DROP ever, making handling GRO_DROP dead code. This commit removes that dead code. Further, it's not even clear that device drivers have any business in taking action after passing off received packets; that's arguably out of their hands. Fixes: 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()") Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller --- drivers/net/ethernet/socionext/netsec.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c index 328bc38848bb..0f366cc50b74 100644 --- a/drivers/net/ethernet/socionext/netsec.c +++ b/drivers/net/ethernet/socionext/netsec.c @@ -1044,8 +1044,9 @@ static int netsec_process_rx(struct netsec_priv *priv, int budget) skb->ip_summed = CHECKSUM_UNNECESSARY; next: - if ((skb && napi_gro_receive(&priv->napi, skb) != GRO_DROP) || - xdp_result) { + if (skb) + napi_gro_receive(&priv->napi, skb); + if (skb || xdp_result) { ndev->stats.rx_packets++; ndev->stats.rx_bytes += xdp.data_end - xdp.data; } From 93ab48a97af50c7c62c3c94996002949ffebf004 Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Wed, 24 Jun 2020 16:06:05 -0600 Subject: [PATCH 513/618] hns: do not cast return value of napi_gro_receive to null Basically no drivers care about the return value here, and there's no __must_check that would make casting to void sensible, so remove it. Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns/hns_enet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c index c117074c16e3..23f278e46975 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c @@ -699,7 +699,7 @@ static void hns_nic_rx_up_pro(struct hns_nic_ring_data *ring_data, struct net_device *ndev = ring_data->napi.dev; skb->protocol = eth_type_trans(skb, ndev); - (void)napi_gro_receive(&ring_data->napi, skb); + napi_gro_receive(&ring_data->napi, skb); } static int hns_desc_unused(struct hnae_ring *ring) From 045790b7bc66a75070c112a61558c639cef2263e Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Wed, 24 Jun 2020 16:06:06 -0600 Subject: [PATCH 514/618] wil6210: account for napi_gro_receive never returning GRO_DROP The napi_gro_receive function no longer returns GRO_DROP ever, making handling GRO_DROP dead code. This commit removes that dead code. Further, it's not even clear that device drivers have any business in taking action after passing off received packets; that's arguably out of their hands. In this case, too, the non-gro path didn't bother checking the return value. Plus, this had some clunky debugging functions that duplicated code from elsewhere and was generally pretty messy. So, this commit cleans that all up too. Fixes: 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()") Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller --- drivers/net/wireless/ath/wil6210/txrx.c | 39 +++++++------------------ 1 file changed, 11 insertions(+), 28 deletions(-) diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index bc8c15fb609d..080e5aa60bea 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -897,7 +897,6 @@ static void wil_rx_handle_eapol(struct wil6210_vif *vif, struct sk_buff *skb) void wil_netif_rx(struct sk_buff *skb, struct net_device *ndev, int cid, struct wil_net_stats *stats, bool gro) { - gro_result_t rc = GRO_NORMAL; struct wil6210_vif *vif = ndev_to_vif(ndev); struct wil6210_priv *wil = ndev_to_wil(ndev); struct wireless_dev *wdev = vif_to_wdev(vif); @@ -908,22 +907,16 @@ void wil_netif_rx(struct sk_buff *skb, struct net_device *ndev, int cid, */ int mcast = is_multicast_ether_addr(da); struct sk_buff *xmit_skb = NULL; - static const char * const gro_res_str[] = { - [GRO_MERGED] = "GRO_MERGED", - [GRO_MERGED_FREE] = "GRO_MERGED_FREE", - [GRO_HELD] = "GRO_HELD", - [GRO_NORMAL] = "GRO_NORMAL", - [GRO_DROP] = "GRO_DROP", - [GRO_CONSUMED] = "GRO_CONSUMED", - }; if (wdev->iftype == NL80211_IFTYPE_STATION) { sa = wil_skb_get_sa(skb); if (mcast && ether_addr_equal(sa, ndev->dev_addr)) { /* mcast packet looped back to us */ - rc = GRO_DROP; dev_kfree_skb(skb); - goto stats; + ndev->stats.rx_dropped++; + stats->rx_dropped++; + wil_dbg_txrx(wil, "Rx drop %d bytes\n", len); + return; } } else if (wdev->iftype == NL80211_IFTYPE_AP && !vif->ap_isolate) { if (mcast) { @@ -967,26 +960,16 @@ void wil_netif_rx(struct sk_buff *skb, struct net_device *ndev, int cid, wil_rx_handle_eapol(vif, skb); if (gro) - rc = napi_gro_receive(&wil->napi_rx, skb); + napi_gro_receive(&wil->napi_rx, skb); else netif_rx_ni(skb); - wil_dbg_txrx(wil, "Rx complete %d bytes => %s\n", - len, gro_res_str[rc]); - } -stats: - /* statistics. rc set to GRO_NORMAL for AP bridging */ - if (unlikely(rc == GRO_DROP)) { - ndev->stats.rx_dropped++; - stats->rx_dropped++; - wil_dbg_txrx(wil, "Rx drop %d bytes\n", len); - } else { - ndev->stats.rx_packets++; - stats->rx_packets++; - ndev->stats.rx_bytes += len; - stats->rx_bytes += len; - if (mcast) - ndev->stats.multicast++; } + ndev->stats.rx_packets++; + stats->rx_packets++; + ndev->stats.rx_bytes += len; + stats->rx_bytes += len; + if (mcast) + ndev->stats.multicast++; } void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev) From 1ae71d997a672739b22572cbe72d61a0eed8c42c Mon Sep 17 00:00:00 2001 From: Michal Kubecek Date: Thu, 25 Jun 2020 00:09:08 +0200 Subject: [PATCH 515/618] ethtool: fix error handling in linkstate_prepare_data() When getting SQI or maximum SQI value fails in linkstate_prepare_data(), we must not return without calling ethnl_ops_complete(dev) as that could result in imbalance between ethtool_ops ->begin() and ->complete() calls. Fixes: 806602191592 ("ethtool: provide UAPI for PHY Signal Quality Index (SQI)") Signed-off-by: Michal Kubecek Signed-off-by: David S. Miller --- net/ethtool/linkstate.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/net/ethtool/linkstate.c b/net/ethtool/linkstate.c index 7f47ba89054e..afe5ac8a0f00 100644 --- a/net/ethtool/linkstate.c +++ b/net/ethtool/linkstate.c @@ -78,19 +78,18 @@ static int linkstate_prepare_data(const struct ethnl_req_info *req_base, ret = linkstate_get_sqi(dev); if (ret < 0 && ret != -EOPNOTSUPP) - return ret; - + goto out; data->sqi = ret; ret = linkstate_get_sqi_max(dev); if (ret < 0 && ret != -EOPNOTSUPP) - return ret; - + goto out; data->sqi_max = ret; + ret = 0; +out: ethnl_ops_complete(dev); - - return 0; + return ret; } static int linkstate_reply_size(const struct ethnl_req_info *req_base, From 9208d2863ac689a563b92f2161d8d1e7127d0add Mon Sep 17 00:00:00 2001 From: Ilya Ponetayev Date: Thu, 25 Jun 2020 22:12:07 +0200 Subject: [PATCH 516/618] sch_cake: don't try to reallocate or unshare skb unconditionally MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit cake_handle_diffserv() tries to linearize mac and network header parts of skb and to make it writable unconditionally. In some cases it leads to full skb reallocation, which reduces throughput and increases CPU load. Some measurements of IPv4 forward + NAPT on MIPS router with 580 MHz single-core CPU was conducted. It appears that on kernel 4.9 skb_try_make_writable() reallocates skb, if skb was allocated in ethernet driver via so-called 'build skb' method from page cache (it was discovered by strange increase of kmalloc-2048 slab at first). Obtain DSCP value via read-only skb_header_pointer() call, and leave linearization only for DSCP bleaching or ECN CE setting. And, as an additional optimisation, skip diffserv parsing entirely if it is not needed by the current configuration. Fixes: c87b4ecdbe8d ("sch_cake: Make sure we can write the IP header before changing DSCP bits") Signed-off-by: Ilya Ponetayev [ fix a few style issues, reflow commit message ] Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller --- net/sched/sch_cake.c | 41 ++++++++++++++++++++++++++++++----------- 1 file changed, 30 insertions(+), 11 deletions(-) diff --git a/net/sched/sch_cake.c b/net/sched/sch_cake.c index 60f8ae578819..cae006bef565 100644 --- a/net/sched/sch_cake.c +++ b/net/sched/sch_cake.c @@ -1553,30 +1553,49 @@ static unsigned int cake_drop(struct Qdisc *sch, struct sk_buff **to_free) static u8 cake_handle_diffserv(struct sk_buff *skb, u16 wash) { - int wlen = skb_network_offset(skb); + const int offset = skb_network_offset(skb); + u16 *buf, buf_; u8 dscp; switch (tc_skb_protocol(skb)) { case htons(ETH_P_IP): - wlen += sizeof(struct iphdr); - if (!pskb_may_pull(skb, wlen) || - skb_try_make_writable(skb, wlen)) + buf = skb_header_pointer(skb, offset, sizeof(buf_), &buf_); + if (unlikely(!buf)) return 0; - dscp = ipv4_get_dsfield(ip_hdr(skb)) >> 2; - if (wash && dscp) + /* ToS is in the second byte of iphdr */ + dscp = ipv4_get_dsfield((struct iphdr *)buf) >> 2; + + if (wash && dscp) { + const int wlen = offset + sizeof(struct iphdr); + + if (!pskb_may_pull(skb, wlen) || + skb_try_make_writable(skb, wlen)) + return 0; + ipv4_change_dsfield(ip_hdr(skb), INET_ECN_MASK, 0); + } + return dscp; case htons(ETH_P_IPV6): - wlen += sizeof(struct ipv6hdr); - if (!pskb_may_pull(skb, wlen) || - skb_try_make_writable(skb, wlen)) + buf = skb_header_pointer(skb, offset, sizeof(buf_), &buf_); + if (unlikely(!buf)) return 0; - dscp = ipv6_get_dsfield(ipv6_hdr(skb)) >> 2; - if (wash && dscp) + /* Traffic class is in the first and second bytes of ipv6hdr */ + dscp = ipv6_get_dsfield((struct ipv6hdr *)buf) >> 2; + + if (wash && dscp) { + const int wlen = offset + sizeof(struct ipv6hdr); + + if (!pskb_may_pull(skb, wlen) || + skb_try_make_writable(skb, wlen)) + return 0; + ipv6_change_dsfield(ipv6_hdr(skb), INET_ECN_MASK, 0); + } + return dscp; case htons(ETH_P_ARP): From 8c95eca0bb8c4bd2231a0d581f1ad0d50c90488c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Toke=20H=C3=B8iland-J=C3=B8rgensen?= Date: Thu, 25 Jun 2020 22:12:08 +0200 Subject: [PATCH 517/618] sch_cake: don't call diffserv parsing code when it is not needed MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As a further optimisation of the diffserv parsing codepath, we can skip it entirely if CAKE is configured to neither use diffserv-based classification, nor to zero out the diffserv bits. Fixes: c87b4ecdbe8d ("sch_cake: Make sure we can write the IP header before changing DSCP bits") Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller --- net/sched/sch_cake.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/net/sched/sch_cake.c b/net/sched/sch_cake.c index cae006bef565..094d6e652deb 100644 --- a/net/sched/sch_cake.c +++ b/net/sched/sch_cake.c @@ -1551,7 +1551,7 @@ static unsigned int cake_drop(struct Qdisc *sch, struct sk_buff **to_free) return idx + (tin << 16); } -static u8 cake_handle_diffserv(struct sk_buff *skb, u16 wash) +static u8 cake_handle_diffserv(struct sk_buff *skb, bool wash) { const int offset = skb_network_offset(skb); u16 *buf, buf_; @@ -1612,14 +1612,17 @@ static struct cake_tin_data *cake_select_tin(struct Qdisc *sch, { struct cake_sched_data *q = qdisc_priv(sch); u32 tin, mark; + bool wash; u8 dscp; /* Tin selection: Default to diffserv-based selection, allow overriding - * using firewall marks or skb->priority. + * using firewall marks or skb->priority. Call DSCP parsing early if + * wash is enabled, otherwise defer to below to skip unneeded parsing. */ - dscp = cake_handle_diffserv(skb, - q->rate_flags & CAKE_FLAG_WASH); mark = (skb->mark & q->fwmark_mask) >> q->fwmark_shft; + wash = !!(q->rate_flags & CAKE_FLAG_WASH); + if (wash) + dscp = cake_handle_diffserv(skb, wash); if (q->tin_mode == CAKE_DIFFSERV_BESTEFFORT) tin = 0; @@ -1633,6 +1636,8 @@ static struct cake_tin_data *cake_select_tin(struct Qdisc *sch, tin = q->tin_order[TC_H_MIN(skb->priority) - 1]; else { + if (!wash) + dscp = cake_handle_diffserv(skb, wash); tin = q->tin_index[dscp]; if (unlikely(tin >= q->tin_cnt)) From 3f608f0c41360b11b04c763f348b712f651c8bac Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Toke=20H=C3=B8iland-J=C3=B8rgensen?= Date: Thu, 25 Jun 2020 22:12:09 +0200 Subject: [PATCH 518/618] sch_cake: fix a few style nits MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I spotted a few nits when comparing the in-tree version of sch_cake with the out-of-tree one: A redundant error variable declaration shadowing an outer declaration, and an indentation alignment issue. Fix both of these. Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc") Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller --- net/sched/sch_cake.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sched/sch_cake.c b/net/sched/sch_cake.c index 094d6e652deb..ca813697728e 100644 --- a/net/sched/sch_cake.c +++ b/net/sched/sch_cake.c @@ -2715,7 +2715,7 @@ static int cake_init(struct Qdisc *sch, struct nlattr *opt, qdisc_watchdog_init(&q->watchdog, sch); if (opt) { - int err = cake_change(sch, opt, extack); + err = cake_change(sch, opt, extack); if (err) return err; @@ -3032,7 +3032,7 @@ static int cake_dump_class_stats(struct Qdisc *sch, unsigned long cl, PUT_STAT_S32(BLUE_TIMER_US, ktime_to_us( ktime_sub(now, - flow->cvars.blue_timer))); + flow->cvars.blue_timer))); } if (flow->cvars.dropping) { PUT_STAT_S32(DROP_NEXT_US, From 4c342f778fe234e0c2a2601d87fec8ba42f0d2c6 Mon Sep 17 00:00:00 2001 From: Rao Shoaib Date: Thu, 25 Jun 2020 13:46:00 -0700 Subject: [PATCH 519/618] rds: transport module should be auto loaded when transport is set MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This enhancement auto loads transport module when the transport is set via SO_RDS_TRANSPORT socket option. Reviewed-by: Ka-Cheong Poon Reviewed-by: HÃ¥kon Bugge Signed-off-by: Rao Shoaib Signed-off-by: Somasundaram Krishnasamy Signed-off-by: David S. Miller --- include/uapi/linux/rds.h | 4 +++- net/rds/transport.c | 26 +++++++++++++++++--------- 2 files changed, 20 insertions(+), 10 deletions(-) diff --git a/include/uapi/linux/rds.h b/include/uapi/linux/rds.h index cba368e55863..c21edb966c19 100644 --- a/include/uapi/linux/rds.h +++ b/include/uapi/linux/rds.h @@ -64,10 +64,12 @@ /* supported values for SO_RDS_TRANSPORT */ #define RDS_TRANS_IB 0 -#define RDS_TRANS_IWARP 1 +#define RDS_TRANS_GAP 1 #define RDS_TRANS_TCP 2 #define RDS_TRANS_COUNT 3 #define RDS_TRANS_NONE (~0) +/* don't use RDS_TRANS_IWARP - it is deprecated */ +#define RDS_TRANS_IWARP RDS_TRANS_GAP /* IOCTLS commands for SOL_RDS */ #define SIOCRDSSETTOS (SIOCPROTOPRIVATE) diff --git a/net/rds/transport.c b/net/rds/transport.c index 46f709a4b577..f8001ec80867 100644 --- a/net/rds/transport.c +++ b/net/rds/transport.c @@ -38,6 +38,12 @@ #include "rds.h" #include "loop.h" +static char * const rds_trans_modules[] = { + [RDS_TRANS_IB] = "rds_rdma", + [RDS_TRANS_GAP] = NULL, + [RDS_TRANS_TCP] = "rds_tcp", +}; + static struct rds_transport *transports[RDS_TRANS_COUNT]; static DECLARE_RWSEM(rds_trans_sem); @@ -110,18 +116,20 @@ struct rds_transport *rds_trans_get(int t_type) { struct rds_transport *ret = NULL; struct rds_transport *trans; - unsigned int i; down_read(&rds_trans_sem); - for (i = 0; i < RDS_TRANS_COUNT; i++) { - trans = transports[i]; - - if (trans && trans->t_type == t_type && - (!trans->t_owner || try_module_get(trans->t_owner))) { - ret = trans; - break; - } + trans = transports[t_type]; + if (!trans) { + up_read(&rds_trans_sem); + if (rds_trans_modules[t_type]) + request_module(rds_trans_modules[t_type]); + down_read(&rds_trans_sem); + trans = transports[t_type]; } + if (trans && trans->t_type == t_type && + (!trans->t_owner || try_module_get(trans->t_owner))) + ret = trans; + up_read(&rds_trans_sem); return ret; From 896066aa0685af3434637998b76218c2045142a8 Mon Sep 17 00:00:00 2001 From: Harish Date: Thu, 25 Jun 2020 22:27:21 +0530 Subject: [PATCH 520/618] selftests/powerpc: Fix build failure in ebb tests We use OUTPUT directory as TMPOUT for checking no-pie option. Since commit f2f02ebd8f38 ("kbuild: improve cc-option to clean up all temporary files") when building powerpc/ from selftests directory, the OUTPUT directory points to powerpc/pmu/ebb/ and gets removed when checking for -no-pie option in try-run routine, subsequently build fails with the following: $ make -C powerpc ... TARGET=ebb; BUILD_TARGET=$OUTPUT/$TARGET; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C $TARGET all make[2]: Entering directory '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb' make[2]: *** No rule to make target 'Makefile'. make[2]: Failed to remake makefile 'Makefile'. make[2]: *** No rule to make target 'ebb.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'. make[2]: *** No rule to make target 'ebb_handler.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'. make[2]: *** No rule to make target 'trace.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'. make[2]: *** No rule to make target 'busy_loop.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'. make[2]: Target 'all' not remade because of errors. Fix this by adding a suffix to the OUTPUT directory so that the failure is avoided. Fixes: 9686813f6e9d ("selftests/powerpc: Fix try-run when source tree is not writable") Signed-off-by: Harish [mpe: Mention that commit that triggered the breakage] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200625165721.264904-1-harish@linux.ibm.com --- tools/testing/selftests/powerpc/pmu/ebb/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/powerpc/pmu/ebb/Makefile b/tools/testing/selftests/powerpc/pmu/ebb/Makefile index ca35dd8848b0..af3df79d8163 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/Makefile +++ b/tools/testing/selftests/powerpc/pmu/ebb/Makefile @@ -7,7 +7,7 @@ noarg: # The EBB handler is 64-bit code and everything links against it CFLAGS += -m64 -TMPOUT = $(OUTPUT)/ +TMPOUT = $(OUTPUT)/TMPDIR/ # Toolchains may build PIE by default which breaks the assembly no-pie-option := $(call try-run, echo 'int main() { return 0; }' | \ $(CC) -Werror $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS) -no-pie -x c - -o "$$TMP", -no-pie) From 313a5257b84c26b7f080c5d294aabe7d38ca439c Mon Sep 17 00:00:00 2001 From: Stafford Horne Date: Thu, 25 Jun 2020 20:29:17 -0700 Subject: [PATCH 521/618] openrisc: fix boot oops when DEBUG_VM is enabled Since v5.8-rc1 OpenRISC Linux fails to boot when DEBUG_VM is enabled. This has been bisected to commit 42fc541404f2 ("mmap locking API: add mmap_assert_locked() and mmap_assert_write_locked()"). The added locking checks exposed the issue that OpenRISC was not taking this mmap lock when during page walks for DMA operations. This patch locks and unlocks the mmap lock for page walking. Link: http://lkml.kernel.org/r/20200617090247.1680188-1-shorne@gmail.com Fixes: 42fc541404f2 ("mmap locking API: add mmap_assert_locked() and mmap_assert_write_locked()" Signed-off-by: Stafford Horne Reviewed-by: Michel Lespinasse Cc: Jonas Bonn Cc: Stefan Kristiansson Cc: Jason Gunthorpe Cc: Steven Price Cc: Thomas Hellstrom Cc: Robin Murphy Cc: Vlastimil Babka Cc: Daniel Jordan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/openrisc/kernel/dma.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/openrisc/kernel/dma.c b/arch/openrisc/kernel/dma.c index c152a68811dd..345727638d52 100644 --- a/arch/openrisc/kernel/dma.c +++ b/arch/openrisc/kernel/dma.c @@ -74,8 +74,11 @@ void *arch_dma_set_uncached(void *cpu_addr, size_t size) * We need to iterate through the pages, clearing the dcache for * them and setting the cache-inhibit bit. */ + mmap_read_lock(&init_mm); error = walk_page_range(&init_mm, va, va + size, &set_nocache_walk_ops, NULL); + mmap_read_unlock(&init_mm); + if (error) return ERR_PTR(error); return cpu_addr; @@ -85,9 +88,11 @@ void arch_dma_clear_uncached(void *cpu_addr, size_t size) { unsigned long va = (unsigned long)cpu_addr; + mmap_read_lock(&init_mm); /* walk_page_range shouldn't be able to fail here */ WARN_ON(walk_page_range(&init_mm, va, va + size, &clear_nocache_walk_ops, NULL)); + mmap_read_unlock(&init_mm); } void arch_sync_dma_for_device(phys_addr_t addr, size_t size, From 545b1b077ca6b359820436af097bc65e3f6f6cc9 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Thu, 25 Jun 2020 20:29:21 -0700 Subject: [PATCH 522/618] mm: do_swap_page(): fix up the error code do_swap_page() returns error codes from the VM_FAULT* space. try_charge() might return -ENOMEM, though, and then do_swap_page() simply returns 0 which means a success. We almost never return ENOMEM for GFP_KERNEL single page charge. Except for async OOM handling (oom_disabled v1). So this needs translation to VM_FAULT_OOM otherwise the the page fault path will not notify the userspace and wait for an action. Link: http://lkml.kernel.org/r/20200617090238.GL9499@dhcp22.suse.cz Fixes: 4c6355b25e8b ("mm: memcontrol: charge swapin pages on instantiation") Signed-off-by: Michal Hocko Acked-by: Johannes Weiner Cc: Alex Shi Cc: Joonsoo Kim Cc: Shakeel Butt Cc: Hugh Dickins Cc: "Kirill A. Shutemov" Cc: Roman Gushchin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/mm/memory.c b/mm/memory.c index dc7f3543b1fd..1c632faa2611 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -3140,8 +3140,10 @@ vm_fault_t do_swap_page(struct vm_fault *vmf) err = mem_cgroup_charge(page, vma->vm_mm, GFP_KERNEL); ClearPageSwapCache(page); - if (err) + if (err) { + ret = VM_FAULT_OOM; goto out_page; + } lru_cache_add(page); swap_readpage(page, true); From b9e20f0da1f5c9c68689450a8cb436c9486434c8 Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Thu, 25 Jun 2020 20:29:24 -0700 Subject: [PATCH 523/618] mm, compaction: make capture control handling safe wrt interrupts Hugh reports: "While stressing compaction, one run oopsed on NULL capc->cc in __free_one_page()'s task_capc(zone): compact_zone_order() had been interrupted, and a page was being freed in the return from interrupt. Though you would not expect it from the source, both gccs I was using (4.8.1 and 7.5.0) had chosen to compile compact_zone_order() with the ".cc = &cc" implemented by mov %rbx,-0xb0(%rbp) immediately before callq compact_zone - long after the "current->capture_control = &capc". An interrupt in between those finds capc->cc NULL (zeroed by an earlier rep stos). This could presumably be fixed by a barrier() before setting current->capture_control in compact_zone_order(); but would also need more care on return from compact_zone(), in order not to risk leaking a page captured by interrupt just before capture_control is reset. Maybe that is the preferable fix, but I felt safer for task_capc() to exclude the rather surprising possibility of capture at interrupt time" I have checked that gcc10 also behaves the same. The advantage of fix in compact_zone_order() is that we don't add another test in the page freeing hot path, and that it might prevent future problems if we stop exposing pointers to uninitialized structures in current task. So this patch implements the suggestion for compact_zone_order() with barrier() (and WRITE_ONCE() to prevent store tearing) for setting current->capture_control, and prevents page leaking with WRITE_ONCE/READ_ONCE in the proper order. Link: http://lkml.kernel.org/r/20200616082649.27173-1-vbabka@suse.cz Fixes: 5e1f0f098b46 ("mm, compaction: capture a page under direct compaction") Signed-off-by: Vlastimil Babka Reported-by: Hugh Dickins Suggested-by: Hugh Dickins Acked-by: Hugh Dickins Cc: Alex Shi Cc: Li Wang Cc: Mel Gorman Cc: [5.1+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/compaction.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/mm/compaction.c b/mm/compaction.c index fd988b7e5f2b..86375605faa9 100644 --- a/mm/compaction.c +++ b/mm/compaction.c @@ -2316,15 +2316,26 @@ static enum compact_result compact_zone_order(struct zone *zone, int order, .page = NULL, }; - current->capture_control = &capc; + /* + * Make sure the structs are really initialized before we expose the + * capture control, in case we are interrupted and the interrupt handler + * frees a page. + */ + barrier(); + WRITE_ONCE(current->capture_control, &capc); ret = compact_zone(&cc, &capc); VM_BUG_ON(!list_empty(&cc.freepages)); VM_BUG_ON(!list_empty(&cc.migratepages)); - *capture = capc.page; - current->capture_control = NULL; + /* + * Make sure we hide capture control first before we read the captured + * page pointer, otherwise an interrupt could free and capture a page + * and we would leak it. + */ + WRITE_ONCE(current->capture_control, NULL); + *capture = READ_ONCE(capc.page); return ret; } From fd7af71be54271a9f03b2e6f63e4b3ac1ecd113d Mon Sep 17 00:00:00 2001 From: Lianbo Jiang Date: Thu, 25 Jun 2020 20:29:27 -0700 Subject: [PATCH 524/618] kexec: do not verify the signature without the lockdown or mandatory signature Signature verification is an important security feature, to protect system from being attacked with a kernel of unknown origin. Kexec rebooting is a way to replace the running kernel, hence need be secured carefully. In the current code of handling signature verification of kexec kernel, the logic is very twisted. It mixes signature verification, IMA signature appraising and kexec lockdown. If there is no KEXEC_SIG_FORCE, kexec kernel image doesn't have one of signature, the supported crypto, and key, we don't think this is wrong, Unless kexec lockdown is executed. IMA is considered as another kind of signature appraising method. If kexec kernel image has signature/crypto/key, it has to go through the signature verification and pass. Otherwise it's seen as verification failure, and won't be loaded. Seems kexec kernel image with an unqualified signature is even worse than those w/o signature at all, this sounds very unreasonable. E.g. If people get a unsigned kernel to load, or a kernel signed with expired key, which one is more dangerous? So, here, let's simplify the logic to improve code readability. If the KEXEC_SIG_FORCE enabled or kexec lockdown enabled, signature verification is mandated. Otherwise, we lift the bar for any kernel image. Link: http://lkml.kernel.org/r/20200602045952.27487-1-lijiang@redhat.com Signed-off-by: Lianbo Jiang Reviewed-by: Jiri Bohac Acked-by: Dave Young Acked-by: Baoquan He Cc: James Morris Cc: Matthew Garrett Cc: "Eric W. Biederman" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/kexec_file.c | 34 ++++++---------------------------- 1 file changed, 6 insertions(+), 28 deletions(-) diff --git a/kernel/kexec_file.c b/kernel/kexec_file.c index bb05fd52de85..09cc78df53c6 100644 --- a/kernel/kexec_file.c +++ b/kernel/kexec_file.c @@ -181,34 +181,19 @@ void kimage_file_post_load_cleanup(struct kimage *image) static int kimage_validate_signature(struct kimage *image) { - const char *reason; int ret; ret = arch_kexec_kernel_verify_sig(image, image->kernel_buf, image->kernel_buf_len); - switch (ret) { - case 0: - break; + if (ret) { - /* Certain verification errors are non-fatal if we're not - * checking errors, provided we aren't mandating that there - * must be a valid signature. - */ - case -ENODATA: - reason = "kexec of unsigned image"; - goto decide; - case -ENOPKG: - reason = "kexec of image with unsupported crypto"; - goto decide; - case -ENOKEY: - reason = "kexec of image with unavailable key"; - decide: if (IS_ENABLED(CONFIG_KEXEC_SIG_FORCE)) { - pr_notice("%s rejected\n", reason); + pr_notice("Enforced kernel signature verification failed (%d).\n", ret); return ret; } - /* If IMA is guaranteed to appraise a signature on the kexec + /* + * If IMA is guaranteed to appraise a signature on the kexec * image, permit it even if the kernel is otherwise locked * down. */ @@ -216,17 +201,10 @@ kimage_validate_signature(struct kimage *image) security_locked_down(LOCKDOWN_KEXEC)) return -EPERM; - return 0; - - /* All other errors are fatal, including nomem, unparseable - * signatures and signature check failures - even if signatures - * aren't required. - */ - default: - pr_notice("kernel signature verification failed (%d).\n", ret); + pr_debug("kernel signature verification failed (%d).\n", ret); } - return ret; + return 0; } #endif From 4cd9973f9ff69e37dd0ba2bd6e6423f8179c329a Mon Sep 17 00:00:00 2001 From: Junxiao Bi Date: Thu, 25 Jun 2020 20:29:30 -0700 Subject: [PATCH 525/618] ocfs2: avoid inode removal while nfsd is accessing it Patch series "ocfs2: fix nfsd over ocfs2 issues", v2. This is a series of patches to fix issues on nfsd over ocfs2. patch 1 is to avoid inode removed while nfsd access it patch 2 & 3 is to fix a panic issue. This patch (of 4): When nfsd is getting file dentry using handle or parent dentry of some dentry, one cluster lock is used to avoid inode removed from other node, but it still could be removed from local node, so use a rw lock to avoid this. Link: http://lkml.kernel.org/r/20200616183829.87211-1-junxiao.bi@oracle.com Link: http://lkml.kernel.org/r/20200616183829.87211-2-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi Reviewed-by: Joseph Qi Cc: Changwei Ge Cc: Gang He Cc: Joel Becker Cc: Jun Piao Cc: Mark Fasheh Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/dlmglue.c | 17 ++++++++++++++++- fs/ocfs2/ocfs2.h | 1 + 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 152a0fc4e905..751bc4dc7466 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -689,6 +689,12 @@ static void ocfs2_nfs_sync_lock_res_init(struct ocfs2_lock_res *res, &ocfs2_nfs_sync_lops, osb); } +static void ocfs2_nfs_sync_lock_init(struct ocfs2_super *osb) +{ + ocfs2_nfs_sync_lock_res_init(&osb->osb_nfs_sync_lockres, osb); + init_rwsem(&osb->nfs_sync_rwlock); +} + void ocfs2_trim_fs_lock_res_init(struct ocfs2_super *osb) { struct ocfs2_lock_res *lockres = &osb->osb_trim_fs_lockres; @@ -2855,6 +2861,11 @@ int ocfs2_nfs_sync_lock(struct ocfs2_super *osb, int ex) if (ocfs2_is_hard_readonly(osb)) return -EROFS; + if (ex) + down_write(&osb->nfs_sync_rwlock); + else + down_read(&osb->nfs_sync_rwlock); + if (ocfs2_mount_local(osb)) return 0; @@ -2873,6 +2884,10 @@ void ocfs2_nfs_sync_unlock(struct ocfs2_super *osb, int ex) if (!ocfs2_mount_local(osb)) ocfs2_cluster_unlock(osb, lockres, ex ? LKM_EXMODE : LKM_PRMODE); + if (ex) + up_write(&osb->nfs_sync_rwlock); + else + up_read(&osb->nfs_sync_rwlock); } int ocfs2_trim_fs_lock(struct ocfs2_super *osb, @@ -3340,7 +3355,7 @@ int ocfs2_dlm_init(struct ocfs2_super *osb) local: ocfs2_super_lock_res_init(&osb->osb_super_lockres, osb); ocfs2_rename_lock_res_init(&osb->osb_rename_lockres, osb); - ocfs2_nfs_sync_lock_res_init(&osb->osb_nfs_sync_lockres, osb); + ocfs2_nfs_sync_lock_init(osb); ocfs2_orphan_scan_lock_res_init(&osb->osb_orphan_scan.os_lockres, osb); osb->cconn = conn; diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index ee5d98516212..2dd71d626196 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -395,6 +395,7 @@ struct ocfs2_super struct ocfs2_lock_res osb_super_lockres; struct ocfs2_lock_res osb_rename_lockres; struct ocfs2_lock_res osb_nfs_sync_lockres; + struct rw_semaphore nfs_sync_rwlock; struct ocfs2_lock_res osb_trim_fs_lockres; struct mutex obs_trim_fs_mutex; struct ocfs2_dlm_debug *osb_dlm_debug; From 7569d3c754e452769a5747eeeba488179e38a5da Mon Sep 17 00:00:00 2001 From: Junxiao Bi Date: Thu, 25 Jun 2020 20:29:33 -0700 Subject: [PATCH 526/618] ocfs2: load global_inode_alloc Set global_inode_alloc as OCFS2_FIRST_ONLINE_SYSTEM_INODE, that will make it load during mount. It can be used to test whether some global/system inodes are valid. One use case is that nfsd will test whether root inode is valid. Link: http://lkml.kernel.org/r/20200616183829.87211-3-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi Reviewed-by: Joseph Qi Cc: Changwei Ge Cc: Gang He Cc: Joel Becker Cc: Jun Piao Cc: Mark Fasheh Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/ocfs2_fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h index 0dd8c41bafd4..3fc99659ed09 100644 --- a/fs/ocfs2/ocfs2_fs.h +++ b/fs/ocfs2/ocfs2_fs.h @@ -326,8 +326,8 @@ struct ocfs2_system_inode_info { enum { BAD_BLOCK_SYSTEM_INODE = 0, GLOBAL_INODE_ALLOC_SYSTEM_INODE, +#define OCFS2_FIRST_ONLINE_SYSTEM_INODE GLOBAL_INODE_ALLOC_SYSTEM_INODE SLOT_MAP_SYSTEM_INODE, -#define OCFS2_FIRST_ONLINE_SYSTEM_INODE SLOT_MAP_SYSTEM_INODE HEARTBEAT_SYSTEM_INODE, GLOBAL_BITMAP_SYSTEM_INODE, USER_QUOTA_SYSTEM_INODE, From e5a15e17a78d58f933d17cafedfcf7486a29f5b4 Mon Sep 17 00:00:00 2001 From: Junxiao Bi Date: Thu, 25 Jun 2020 20:29:37 -0700 Subject: [PATCH 527/618] ocfs2: fix panic on nfs server over ocfs2 The following kernel panic was captured when running nfs server over ocfs2, at that time ocfs2_test_inode_bit() was checking whether one inode locating at "blkno" 5 was valid, that is ocfs2 root inode, its "suballoc_slot" was OCFS2_INVALID_SLOT(65535) and it was allocted from //global_inode_alloc, but here it wrongly assumed that it was got from per slot inode alloctor which would cause array overflow and trigger kernel panic. BUG: unable to handle kernel paging request at 0000000000001088 IP: [] _raw_spin_lock+0x18/0xf0 PGD 1e06ba067 PUD 1e9e7d067 PMD 0 Oops: 0002 [#1] SMP CPU: 6 PID: 24873 Comm: nfsd Not tainted 4.1.12-124.36.1.el6uek.x86_64 #2 Hardware name: Huawei CH121 V3/IT11SGCA1, BIOS 3.87 02/02/2018 RIP: _raw_spin_lock+0x18/0xf0 RSP: e02b:ffff88005ae97908 EFLAGS: 00010206 RAX: ffff88005ae98000 RBX: 0000000000001088 RCX: 0000000000000000 RDX: 0000000000020000 RSI: 0000000000000009 RDI: 0000000000001088 RBP: ffff88005ae97928 R08: 0000000000000000 R09: ffff880212878e00 R10: 0000000000007ff0 R11: 0000000000000000 R12: 0000000000001088 R13: ffff8800063c0aa8 R14: ffff8800650c27d0 R15: 000000000000ffff FS: 0000000000000000(0000) GS:ffff880218180000(0000) knlGS:ffff880218180000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001088 CR3: 00000002033d0000 CR4: 0000000000042660 Call Trace: igrab+0x1e/0x60 ocfs2_get_system_file_inode+0x63/0x3a0 [ocfs2] ocfs2_test_inode_bit+0x328/0xa00 [ocfs2] ocfs2_get_parent+0xba/0x3e0 [ocfs2] reconnect_path+0xb5/0x300 exportfs_decode_fh+0xf6/0x2b0 fh_verify+0x350/0x660 [nfsd] nfsd4_putfh+0x4d/0x60 [nfsd] nfsd4_proc_compound+0x3d3/0x6f0 [nfsd] nfsd_dispatch+0xe0/0x290 [nfsd] svc_process_common+0x412/0x6a0 [sunrpc] svc_process+0x123/0x210 [sunrpc] nfsd+0xff/0x170 [nfsd] kthread+0xcb/0xf0 ret_from_fork+0x61/0x90 Code: 83 c2 02 0f b7 f2 e8 18 dc 91 ff 66 90 eb bf 0f 1f 40 00 55 48 89 e5 41 56 41 55 41 54 53 0f 1f 44 00 00 48 89 fb ba 00 00 02 00 0f c1 17 89 d0 45 31 e4 45 31 ed c1 e8 10 66 39 d0 41 89 c6 RIP _raw_spin_lock+0x18/0xf0 CR2: 0000000000001088 ---[ end trace 7264463cd1aac8f9 ]--- Kernel panic - not syncing: Fatal exception Link: http://lkml.kernel.org/r/20200616183829.87211-4-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi Reviewed-by: Joseph Qi Cc: Changwei Ge Cc: Gang He Cc: Joel Becker Cc: Jun Piao Cc: Mark Fasheh Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/suballoc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c index 4836becb7578..45745cc3408a 100644 --- a/fs/ocfs2/suballoc.c +++ b/fs/ocfs2/suballoc.c @@ -2825,9 +2825,12 @@ int ocfs2_test_inode_bit(struct ocfs2_super *osb, u64 blkno, int *res) goto bail; } - inode_alloc_inode = - ocfs2_get_system_file_inode(osb, INODE_ALLOC_SYSTEM_INODE, - suballoc_slot); + if (suballoc_slot == (u16)OCFS2_INVALID_SLOT) + inode_alloc_inode = ocfs2_get_system_file_inode(osb, + GLOBAL_INODE_ALLOC_SYSTEM_INODE, suballoc_slot); + else + inode_alloc_inode = ocfs2_get_system_file_inode(osb, + INODE_ALLOC_SYSTEM_INODE, suballoc_slot); if (!inode_alloc_inode) { /* the error code could be inaccurate, but we are not able to * get the correct one. */ From 9277f8334ffc719fe922d776444d6e4e884dbf30 Mon Sep 17 00:00:00 2001 From: Junxiao Bi Date: Thu, 25 Jun 2020 20:29:40 -0700 Subject: [PATCH 528/618] ocfs2: fix value of OCFS2_INVALID_SLOT In the ocfs2 disk layout, slot number is 16 bits, but in ocfs2 implementation, slot number is 32 bits. Usually this will not cause any issue, because slot number is converted from u16 to u32, but OCFS2_INVALID_SLOT was defined as -1, when an invalid slot number from disk was obtained, its value was (u16)-1, and it was converted to u32. Then the following checking in get_local_system_inode will be always skipped: static struct inode **get_local_system_inode(struct ocfs2_super *osb, int type, u32 slot) { BUG_ON(slot == OCFS2_INVALID_SLOT); ... } Link: http://lkml.kernel.org/r/20200616183829.87211-5-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/ocfs2_fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h index 3fc99659ed09..19137c6d087b 100644 --- a/fs/ocfs2/ocfs2_fs.h +++ b/fs/ocfs2/ocfs2_fs.h @@ -290,7 +290,7 @@ #define OCFS2_MAX_SLOTS 255 /* Slot map indicator for an empty slot */ -#define OCFS2_INVALID_SLOT -1 +#define OCFS2_INVALID_SLOT ((u16)-1) #define OCFS2_VOL_UUID_LEN 16 #define OCFS2_MAX_VOL_LABEL_LEN 64 From 786ae133e07f2a6b352a0efad16b555ee45a2898 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 25 Jun 2020 20:29:43 -0700 Subject: [PATCH 529/618] lib: fix test_hmm.c reference after free MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Coccinelle scripts report the following errors: lib/test_hmm.c:523:20-26: ERROR: reference preceded by free on line 521 lib/test_hmm.c:524:21-27: ERROR: reference preceded by free on line 521 lib/test_hmm.c:523:28-35: ERROR: devmem is NULL but dereferenced. lib/test_hmm.c:524:29-36: ERROR: devmem is NULL but dereferenced. Fix these by using the local variable 'res' instead of devmem. Link: http://lkml.kernel.org/r/c845c158-9c65-9665-0d0b-00342846dd07@infradead.org Signed-off-by: Randy Dunlap Reviewed-by: Ralph Campbell Cc: Jérôme Glisse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/test_hmm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/lib/test_hmm.c b/lib/test_hmm.c index 28528285942c..a2a82262b97b 100644 --- a/lib/test_hmm.c +++ b/lib/test_hmm.c @@ -520,8 +520,7 @@ static bool dmirror_allocate_chunk(struct dmirror_device *mdevice, err_free: kfree(devmem); err_release: - release_mem_region(devmem->pagemap.res.start, - resource_size(&devmem->pagemap.res)); + release_mem_region(res->start, resource_size(res)); err: mutex_unlock(&mdevice->devmem_lock); return false; From d7670879c5c4aa443d518fb234a9e5f30931efa3 Mon Sep 17 00:00:00 2001 From: Waiman Long Date: Thu, 25 Jun 2020 20:29:49 -0700 Subject: [PATCH 530/618] mm, slab: fix sign conversion problem in memcg_uncharge_slab() It was found that running the LTP test on a PowerPC system could produce erroneous values in /proc/meminfo, like: MemTotal: 531915072 kB MemFree: 507962176 kB MemAvailable: 1100020596352 kB Using bisection, the problem is tracked down to commit 9c315e4d7d8c ("mm: memcg/slab: cache page number in memcg_(un)charge_slab()"). In memcg_uncharge_slab() with a "int order" argument: unsigned int nr_pages = 1 << order; : mod_lruvec_state(lruvec, cache_vmstat_idx(s), -nr_pages); The mod_lruvec_state() function will eventually call the __mod_zone_page_state() which accepts a long argument. Depending on the compiler and how inlining is done, "-nr_pages" may be treated as a negative number or a very large positive number. Apparently, it was treated as a large positive number in that PowerPC system leading to incorrect stat counts. This problem hasn't been seen in x86-64 yet, perhaps the gcc compiler there has some slight difference in behavior. It is fixed by making nr_pages a signed value. For consistency, a similar change is applied to memcg_charge_slab() as well. Link: http://lkml.kernel.org/r/20200620184719.10994-1-longman@redhat.com Fixes: 9c315e4d7d8c ("mm: memcg/slab: cache page number in memcg_(un)charge_slab()"). Signed-off-by: Waiman Long Acked-by: Roman Gushchin Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Shakeel Butt Cc: Johannes Weiner Cc: Michal Hocko Cc: Vladimir Davydov Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slab.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/slab.h b/mm/slab.h index 207c83ef6e06..74f7e09a7cfd 100644 --- a/mm/slab.h +++ b/mm/slab.h @@ -348,7 +348,7 @@ static __always_inline int memcg_charge_slab(struct page *page, gfp_t gfp, int order, struct kmem_cache *s) { - unsigned int nr_pages = 1 << order; + int nr_pages = 1 << order; struct mem_cgroup *memcg; struct lruvec *lruvec; int ret; @@ -388,7 +388,7 @@ static __always_inline int memcg_charge_slab(struct page *page, static __always_inline void memcg_uncharge_slab(struct page *page, int order, struct kmem_cache *s) { - unsigned int nr_pages = 1 << order; + int nr_pages = 1 << order; struct mem_cgroup *memcg; struct lruvec *lruvec; From 8982ae527fbef170ef298650c15d55a9ccd33973 Mon Sep 17 00:00:00 2001 From: Waiman Long Date: Thu, 25 Jun 2020 20:29:52 -0700 Subject: [PATCH 531/618] mm/slab: use memzero_explicit() in kzfree() The kzfree() function is normally used to clear some sensitive information, like encryption keys, in the buffer before freeing it back to the pool. Memset() is currently used for buffer clearing. However unlikely, there is still a non-zero probability that the compiler may choose to optimize away the memory clearing especially if LTO is being used in the future. To make sure that this optimization will never happen, memzero_explicit(), which is introduced in v3.18, is now used in kzfree() to future-proof it. Link: http://lkml.kernel.org/r/20200616154311.12314-2-longman@redhat.com Fixes: 3ef0e5ba4673 ("slab: introduce kzfree()") Signed-off-by: Waiman Long Acked-by: Michal Hocko Cc: David Howells Cc: Jarkko Sakkinen Cc: James Morris Cc: "Serge E. Hallyn" Cc: Joe Perches Cc: Matthew Wilcox Cc: David Rientjes Cc: Johannes Weiner Cc: Dan Carpenter Cc: "Jason A . Donenfeld" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slab_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/slab_common.c b/mm/slab_common.c index 9e72ba224175..37d48a56431d 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -1726,7 +1726,7 @@ void kzfree(const void *p) if (unlikely(ZERO_OR_NULL_PTR(mem))) return; ks = ksize(mem); - memset(mem, 0, ks); + memzero_explicit(mem, ks); kfree(mem); } EXPORT_SYMBOL(kzfree); From 55860d96ca59265d35427da0ee7d7f61e404f8e7 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Thu, 25 Jun 2020 20:29:55 -0700 Subject: [PATCH 532/618] slub: cure list_slab_objects() from double fix According to Christopher Lameter two fixes have been merged for the same problem. As far as I can tell, the code does not acquire the list_lock and invoke kmalloc(). list_slab_objects() misses an unlock (the counterpart to get_map()) and the memory allocated in free_partial() isn't used. Revert the mentioned commit. Link: http://lkml.kernel.org/r/20200618201234.795692-1-bigeasy@linutronix.de Fixes: aa456c7aebb14 ("slub: remove kmalloc under list_lock from list_slab_objects() V2") Link: https://lkml.kernel.org/r/alpine.DEB.2.22.394.2006181501480.12014@www.lameter.com Signed-off-by: Sebastian Andrzej Siewior Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Thomas Gleixner Cc: Yu Zhao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slub.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) diff --git a/mm/slub.c b/mm/slub.c index fe81773fd97e..ef303070d175 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -3766,15 +3766,13 @@ static int kmem_cache_open(struct kmem_cache *s, slab_flags_t flags) } static void list_slab_objects(struct kmem_cache *s, struct page *page, - const char *text, unsigned long *map) + const char *text) { #ifdef CONFIG_SLUB_DEBUG void *addr = page_address(page); + unsigned long *map; void *p; - if (!map) - return; - slab_err(s, page, text, s->name); slab_lock(page); @@ -3786,6 +3784,7 @@ static void list_slab_objects(struct kmem_cache *s, struct page *page, print_tracking(s, p); } } + put_map(map); slab_unlock(page); #endif } @@ -3799,11 +3798,6 @@ static void free_partial(struct kmem_cache *s, struct kmem_cache_node *n) { LIST_HEAD(discard); struct page *page, *h; - unsigned long *map = NULL; - -#ifdef CONFIG_SLUB_DEBUG - map = bitmap_alloc(oo_objects(s->max), GFP_KERNEL); -#endif BUG_ON(irqs_disabled()); spin_lock_irq(&n->list_lock); @@ -3813,16 +3807,11 @@ static void free_partial(struct kmem_cache *s, struct kmem_cache_node *n) list_add(&page->slab_list, &discard); } else { list_slab_objects(s, page, - "Objects remaining in %s on __kmem_cache_shutdown()", - map); + "Objects remaining in %s on __kmem_cache_shutdown()"); } } spin_unlock_irq(&n->list_lock); -#ifdef CONFIG_SLUB_DEBUG - bitmap_free(map); -#endif - list_for_each_entry_safe(page, h, &discard, slab_list) discard_slab(s, page); } From 243bce09c91b0145aeaedd5afba799d81841c030 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 25 Jun 2020 20:29:59 -0700 Subject: [PATCH 533/618] mm: fix swap cache node allocation mask Chris Murphy reports that a slightly overcommitted load, testing swap and zram along with i915, splats and keeps on splatting, when it had better fail less noisily: gnome-shell: page allocation failure: order:0, mode:0x400d0(__GFP_IO|__GFP_FS|__GFP_COMP|__GFP_RECLAIMABLE), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 2 PID: 1155 Comm: gnome-shell Not tainted 5.7.0-1.fc33.x86_64 #1 Call Trace: dump_stack+0x64/0x88 warn_alloc.cold+0x75/0xd9 __alloc_pages_slowpath.constprop.0+0xcfa/0xd30 __alloc_pages_nodemask+0x2df/0x320 alloc_slab_page+0x195/0x310 allocate_slab+0x3c5/0x440 ___slab_alloc+0x40c/0x5f0 __slab_alloc+0x1c/0x30 kmem_cache_alloc+0x20e/0x220 xas_nomem+0x28/0x70 add_to_swap_cache+0x321/0x400 __read_swap_cache_async+0x105/0x240 swap_cluster_readahead+0x22c/0x2e0 shmem_swapin+0x8e/0xc0 shmem_swapin_page+0x196/0x740 shmem_getpage_gfp+0x3a2/0xa60 shmem_read_mapping_page_gfp+0x32/0x60 shmem_get_pages+0x155/0x5e0 [i915] __i915_gem_object_get_pages+0x68/0xa0 [i915] i915_vma_pin+0x3fe/0x6c0 [i915] eb_add_vma+0x10b/0x2c0 [i915] i915_gem_do_execbuffer+0x704/0x3430 [i915] i915_gem_execbuffer2_ioctl+0x1ea/0x3e0 [i915] drm_ioctl_kernel+0x86/0xd0 [drm] drm_ioctl+0x206/0x390 [drm] ksys_ioctl+0x82/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5b/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported on 5.7, but it goes back really to 3.1: when shmem_read_mapping_page_gfp() was implemented for use by i915, and allowed for __GFP_NORETRY and __GFP_NOWARN flags in most places, but missed swapin's "& GFP_KERNEL" mask for page tree node allocation in __read_swap_cache_async() - that was to mask off HIGHUSER_MOVABLE bits from what page cache uses, but GFP_RECLAIM_MASK is now what's needed. Link: https://bugzilla.kernel.org/show_bug.cgi?id=208085 Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2006151330070.11064@eggly.anvils Fixes: 68da9f055755 ("tmpfs: pass gfp to shmem_getpage_gfp") Signed-off-by: Hugh Dickins Reviewed-by: Vlastimil Babka Reviewed-by: Matthew Wilcox (Oracle) Reported-by: Chris Murphy Analyzed-by: Vlastimil Babka Analyzed-by: Matthew Wilcox Tested-by: Chris Murphy Cc: [3.1+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/swap_state.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/swap_state.c b/mm/swap_state.c index e98ff460e9e9..05889e8e3c97 100644 --- a/mm/swap_state.c +++ b/mm/swap_state.c @@ -21,7 +21,7 @@ #include #include #include - +#include "internal.h" /* * swapper_space is a fiction, retained to simplify the path through @@ -429,7 +429,7 @@ struct page *__read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask, __SetPageSwapBacked(page); /* May fail (-ENOMEM) if XArray node allocation failed. */ - if (add_to_swap_cache(page, entry, gfp_mask & GFP_KERNEL)) { + if (add_to_swap_cache(page, entry, gfp_mask & GFP_RECLAIM_MASK)) { put_swap_page(page, entry); goto fail_unlock; } From 7f70c2a68a51496289df163f6969d4db7c383f30 Mon Sep 17 00:00:00 2001 From: Arjun Roy Date: Thu, 25 Jun 2020 20:30:01 -0700 Subject: [PATCH 534/618] mm/memory.c: properly pte_offset_map_lock/unlock in vm_insert_pages() Calls to pte_offset_map() in vm_insert_pages() are erroneously not matched with a call to pte_unmap(). This would cause problems on architectures where that is not a no-op. This patch does away with the non-traditional locking in the existing code, and instead uses pte_offset_map_lock/unlock() as usual, incrementing PTE as necessary. The PTE pointer is kept within bounds since we clamp it with PTRS_PER_PTE. Link: http://lkml.kernel.org/r/20200618220446.20284-1-arjunroy.kdev@gmail.com Fixes: 8cd3984d81d5 ("mm/memory.c: add vm_insert_pages()") Signed-off-by: Arjun Roy Acked-by: David Rientjes Cc: Eric Dumazet Cc: Hugh Dickins Cc: Soheil Hassas Yeganeh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/mm/memory.c b/mm/memory.c index 1c632faa2611..0e5b25c9b151 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1498,7 +1498,7 @@ static int insert_page(struct vm_area_struct *vma, unsigned long addr, } #ifdef pte_index -static int insert_page_in_batch_locked(struct mm_struct *mm, pmd_t *pmd, +static int insert_page_in_batch_locked(struct mm_struct *mm, pte_t *pte, unsigned long addr, struct page *page, pgprot_t prot) { int err; @@ -1506,8 +1506,9 @@ static int insert_page_in_batch_locked(struct mm_struct *mm, pmd_t *pmd, if (!page_count(page)) return -EINVAL; err = validate_page_before_insert(page); - return err ? err : insert_page_into_pte_locked( - mm, pte_offset_map(pmd, addr), addr, page, prot); + if (err) + return err; + return insert_page_into_pte_locked(mm, pte, addr, page, prot); } /* insert_pages() amortizes the cost of spinlock operations @@ -1517,7 +1518,8 @@ static int insert_pages(struct vm_area_struct *vma, unsigned long addr, struct page **pages, unsigned long *num, pgprot_t prot) { pmd_t *pmd = NULL; - spinlock_t *pte_lock = NULL; + pte_t *start_pte, *pte; + spinlock_t *pte_lock; struct mm_struct *const mm = vma->vm_mm; unsigned long curr_page_idx = 0; unsigned long remaining_pages_total = *num; @@ -1536,18 +1538,17 @@ static int insert_pages(struct vm_area_struct *vma, unsigned long addr, ret = -ENOMEM; if (pte_alloc(mm, pmd)) goto out; - pte_lock = pte_lockptr(mm, pmd); while (pages_to_write_in_pmd) { int pte_idx = 0; const int batch_size = min_t(int, pages_to_write_in_pmd, 8); - spin_lock(pte_lock); - for (; pte_idx < batch_size; ++pte_idx) { - int err = insert_page_in_batch_locked(mm, pmd, + start_pte = pte_offset_map_lock(mm, pmd, addr, &pte_lock); + for (pte = start_pte; pte_idx < batch_size; ++pte, ++pte_idx) { + int err = insert_page_in_batch_locked(mm, pte, addr, pages[curr_page_idx], prot); if (unlikely(err)) { - spin_unlock(pte_lock); + pte_unmap_unlock(start_pte, pte_lock); ret = err; remaining_pages_total -= pte_idx; goto out; @@ -1555,7 +1556,7 @@ static int insert_pages(struct vm_area_struct *vma, unsigned long addr, addr += PAGE_SIZE; ++curr_page_idx; } - spin_unlock(pte_lock); + pte_unmap_unlock(start_pte, pte_lock); pages_to_write_in_pmd -= batch_size; remaining_pages_total -= batch_size; } From 9449c9cb420b249eb6d7dad3953e4686443d7bd9 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Thu, 25 Jun 2020 20:30:04 -0700 Subject: [PATCH 535/618] mm/debug_vm_pgtable: fix build failure with powerpc 8xx Since commit 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses"), READ_ONCE() cannot be used anymore to read complex page table entries. This leads to: CC mm/debug_vm_pgtable.o In file included from ./include/asm-generic/bug.h:5, from ./arch/powerpc/include/asm/bug.h:109, from ./include/linux/bug.h:5, from ./include/linux/mmdebug.h:5, from ./include/linux/gfp.h:5, from mm/debug_vm_pgtable.c:13: In function 'pte_clear_tests', inlined from 'debug_vm_pgtable' at mm/debug_vm_pgtable.c:363:2: ./include/linux/compiler.h:392:38: error: Unsupported access size for {READ,WRITE}_ONCE(). mm/debug_vm_pgtable.c:249:14: note: in expansion of macro 'READ_ONCE' 249 | pte_t pte = READ_ONCE(*ptep); | ^~~~~~~~~ make[2]: *** [mm/debug_vm_pgtable.o] Error 1 Fix it by using the recently added ptep_get() helper. Link: http://lkml.kernel.org/r/6ca8c972e6c920dc4ae0d4affbed9703afa4d010.1592490570.git.christophe.leroy@csgroup.eu Fixes: 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses") Signed-off-by: Christophe Leroy Acked-by: Will Deacon Reviewed-by: Anshuman Khandual Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: "Peter Zijlstra (Intel)" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/debug_vm_pgtable.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/debug_vm_pgtable.c b/mm/debug_vm_pgtable.c index e45623016aea..61ab16fb2e36 100644 --- a/mm/debug_vm_pgtable.c +++ b/mm/debug_vm_pgtable.c @@ -246,13 +246,13 @@ static void __init pgd_populate_tests(struct mm_struct *mm, pgd_t *pgdp, static void __init pte_clear_tests(struct mm_struct *mm, pte_t *ptep, unsigned long vaddr) { - pte_t pte = READ_ONCE(*ptep); + pte_t pte = ptep_get(ptep); pte = __pte(pte_val(pte) | RANDOM_ORVALUE); set_pte_at(mm, vaddr, ptep, pte); barrier(); pte_clear(mm, vaddr, ptep); - pte = READ_ONCE(*ptep); + pte = ptep_get(ptep); WARN_ON(!pte_none(pte)); } From 8dbdd5049cfa8f8848711ba83c9bbf67e08f5b2d Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 25 Jun 2020 20:30:07 -0700 Subject: [PATCH 536/618] make asm-generic/cacheflush.h more standalone Some s390 builds get these warnings: include/asm-generic/cacheflush.h:16:42: warning: 'struct mm_struct' declared inside parameter list will not be visible outside of this definition or declaration include/asm-generic/cacheflush.h:22:46: warning: 'struct mm_struct' declared inside parameter list will not be visible outside of this definition or declaration include/asm-generic/cacheflush.h:28:45: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration include/asm-generic/cacheflush.h:36:44: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration include/asm-generic/cacheflush.h:44:45: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration include/asm-generic/cacheflush.h:52:50: warning: 'struct address_space' declared inside parameter list will not be visible outside of this definition or declaration include/asm-generic/cacheflush.h:58:52: warning: 'struct address_space' declared inside parameter list will not be visible outside of this definition or declaration include/asm-generic/cacheflush.h:75:17: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration include/asm-generic/cacheflush.h:74:45: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration include/asm-generic/cacheflush.h:82:16: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration include/asm-generic/cacheflush.h:81:50: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration Forward declare the named structs to get rid of these. Link: http://lkml.kernel.org/r/20200623135714.4dae4b8a@canb.auug.org.au Fixes: e0cf615d725c ("asm-generic: don't include in cacheflush.h") Signed-off-by: Stephen Rothwell Reviewed-by: Christoph Hellwig Acked-by: Arnd Bergmann Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Christian Borntraeger Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-generic/cacheflush.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/asm-generic/cacheflush.h b/include/asm-generic/cacheflush.h index 907fa5d16494..4a674db4e1fa 100644 --- a/include/asm-generic/cacheflush.h +++ b/include/asm-generic/cacheflush.h @@ -2,6 +2,11 @@ #ifndef _ASM_GENERIC_CACHEFLUSH_H #define _ASM_GENERIC_CACHEFLUSH_H +struct mm_struct; +struct vm_area_struct; +struct page; +struct address_space; + /* * The cache doesn't need to be flushed when TLB entries change when * the cache is mapped to physical memory, not virtual memory From 3c7858268411dc6473e73965a23854d8f9825424 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Thu, 25 Jun 2020 20:30:11 -0700 Subject: [PATCH 537/618] media: omap3isp: remove cacheflush.h After mm.h was removed from the asm-generic version of cacheflush.h, s390 allyesconfig shows several warnings of the following nature: In file included from arch/s390/include/generated/asm/cacheflush.h:1, from drivers/media/platform/omap3isp/isp.c:42: include/asm-generic/cacheflush.h:16:42: warning: 'struct mm_struct' declared inside parameter list will not be visible outside of this definition or declaration As Geert and Laurent point out, this driver does not need this header in the two files that include it. Remove it so there are no warnings. Link: http://lkml.kernel.org/r/20200622234740.72825-2-natechancellor@gmail.com Fixes: e0cf615d725c ("asm-generic: don't include in cacheflush.h") Signed-off-by: Nathan Chancellor Suggested-by: Geert Uytterhoeven Suggested-by: Laurent Pinchart Reviewed-by: Laurent Pinchart Reviewed-by: Christoph Hellwig Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/media/platform/omap3isp/isp.c | 2 -- drivers/media/platform/omap3isp/ispvideo.c | 1 - 2 files changed, 3 deletions(-) diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c index a4ee6b86663e..b91e472ee764 100644 --- a/drivers/media/platform/omap3isp/isp.c +++ b/drivers/media/platform/omap3isp/isp.c @@ -39,8 +39,6 @@ * Troy Laramy */ -#include - #include #include #include diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c index 10c214bd0903..1ac9aef70dff 100644 --- a/drivers/media/platform/omap3isp/ispvideo.c +++ b/drivers/media/platform/omap3isp/ispvideo.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include From 8eab7035b231aa3ac27b20ec77f85375e4413083 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Thu, 25 Jun 2020 20:30:13 -0700 Subject: [PATCH 538/618] mm/vmalloc.c: fix a warning while make xmldocs This patch fixes following warning while "make xmldocs" mm/vmalloc.c:1877: warning: Excess function parameter 'prot' description in 'vm_map_ram' This warning started since commit d4efd79a81ab ("mm: remove the prot argument from vm_map_ram"). Link: http://lkml.kernel.org/r/20200622152850.140871-1-standby24x7@gmail.com Fixes: d4efd79a81ab ("mm: remove the prot argument from vm_map_ram") Signed-off-by: Masanari Iida Reviewed-by: Andrew Morton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmalloc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 3091c2ca60df..957a0be77270 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -1862,7 +1862,6 @@ EXPORT_SYMBOL(vm_unmap_ram); * @pages: an array of pointers to the pages to be mapped * @count: number of pages * @node: prefer to allocate data structures on this node - * @prot: memory protection to use. PAGE_KERNEL for regular RAM * * If you use this function for less than VMAP_MAX_ALLOC pages, it could be * faster than vmap so it's good. But if you mix long-life and short-life From cd324edce598ebddde44162a2aa01321c1261b9e Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 25 Jun 2020 20:30:16 -0700 Subject: [PATCH 539/618] mm: memcontrol: handle div0 crash race condition in memory.low Tejun reports seeing rare div0 crashes in memory.low stress testing: RIP: 0010:mem_cgroup_calculate_protection+0xed/0x150 Code: 0f 46 d1 4c 39 d8 72 57 f6 05 16 d6 42 01 40 74 1f 4c 39 d8 76 1a 4c 39 d1 76 15 4c 29 d1 4c 29 d8 4d 29 d9 31 d2 48 0f af c1 <49> f7 f1 49 01 c2 4c 89 96 38 01 00 00 5d c3 48 0f af c7 31 d2 49 RSP: 0018:ffffa14e01d6fcd0 EFLAGS: 00010246 RAX: 000000000243e384 RBX: 0000000000000000 RCX: 0000000000008f4b RDX: 0000000000000000 RSI: ffff8b89bee84000 RDI: 0000000000000000 RBP: ffffa14e01d6fcd0 R08: ffff8b89ca7d40f8 R09: 0000000000000000 R10: 0000000000000000 R11: 00000000006422f7 R12: 0000000000000000 R13: ffff8b89d9617000 R14: ffff8b89bee84000 R15: ffffa14e01d6fdb8 FS: 0000000000000000(0000) GS:ffff8b8a1f1c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f93b1fc175b CR3: 000000016100a000 CR4: 0000000000340ea0 Call Trace: shrink_node+0x1e5/0x6c0 balance_pgdat+0x32d/0x5f0 kswapd+0x1d7/0x3d0 kthread+0x11c/0x160 ret_from_fork+0x1f/0x30 This happens when parent_usage == siblings_protected. We check that usage is bigger than protected, which should imply parent_usage being bigger than siblings_protected. However, we don't read (or even update) these values atomically, and they can be out of sync as the memory state changes under us. A bit of fluctuation around the target protection isn't a big deal, but we need to handle the div0 case. Check the parent state explicitly to make sure we have a reasonable positive value for the divisor. Link: http://lkml.kernel.org/r/20200615140658.601684-1-hannes@cmpxchg.org Fixes: 8a931f801340 ("mm: memcontrol: recursive memory.low protection") Signed-off-by: Johannes Weiner Reported-by: Tejun Heo Acked-by: Michal Hocko Acked-by: Chris Down Cc: Roman Gushchin Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 0b38b6ad547d..5de0a9035b5f 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -6360,11 +6360,16 @@ static unsigned long effective_protection(unsigned long usage, * We're using unprotected memory for the weight so that if * some cgroups DO claim explicit protection, we don't protect * the same bytes twice. + * + * Check both usage and parent_usage against the respective + * protected values. One should imply the other, but they + * aren't read atomically - make sure the division is sane. */ if (!(cgrp_dfl_root.flags & CGRP_ROOT_MEMORY_RECURSIVE_PROT)) return ep; - - if (parent_effective > siblings_protected && usage > protected) { + if (parent_effective > siblings_protected && + parent_usage > siblings_protected && + usage > protected) { unsigned long unclaimed; unclaimed = parent_effective - siblings_protected; From 3a98990ae2150277ed34d3b248c60e68bf2244b2 Mon Sep 17 00:00:00 2001 From: Muchun Song Date: Thu, 25 Jun 2020 20:30:19 -0700 Subject: [PATCH 540/618] mm/memcontrol.c: add missed css_put() We should put the css reference when memory allocation failed. Link: http://lkml.kernel.org/r/20200614122653.98829-1-songmuchun@bytedance.com Fixes: f0a3a24b532d ("mm: memcg/slab: rework non-root kmem_cache lifecycle management") Signed-off-by: Muchun Song Acked-by: Roman Gushchin Acked-by: Michal Hocko Cc: Johannes Weiner Cc: Vladimir Davydov Cc: Qian Cai Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 5de0a9035b5f..da15b686caa8 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -2772,8 +2772,10 @@ static void memcg_schedule_kmem_cache_create(struct mem_cgroup *memcg, return; cw = kmalloc(sizeof(*cw), GFP_NOWAIT | __GFP_NOWARN); - if (!cw) + if (!cw) { + css_put(&memcg->css); return; + } cw->memcg = memcg; cw->cachep = cachep; From 03960e33187ae969187281c3aa6c308d7282c468 Mon Sep 17 00:00:00 2001 From: Chris Down Date: Thu, 25 Jun 2020 20:30:22 -0700 Subject: [PATCH 541/618] mm/memcontrol.c: prevent missed memory.low load tears Looks like one of these got missed when massaging in f86b810c2610 ("mm, memcg: prevent memory.low load/store tearing") with other linux-mm changes. Link: http://lkml.kernel.org/r/20200612174437.GA391453@chrisdown.name Signed-off-by: Chris Down Reported-by: Michal Koutny Acked-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index da15b686caa8..19622328e4b5 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -6423,7 +6423,7 @@ enum mem_cgroup_protection mem_cgroup_protected(struct mem_cgroup *root, if (parent == root) { memcg->memory.emin = READ_ONCE(memcg->memory.min); - memcg->memory.elow = memcg->memory.low; + memcg->memory.elow = READ_ONCE(memcg->memory.low); goto out; } @@ -6435,7 +6435,8 @@ enum mem_cgroup_protection mem_cgroup_protected(struct mem_cgroup *root, atomic_long_read(&parent->memory.children_min_usage))); WRITE_ONCE(memcg->memory.elow, effective_protection(usage, parent_usage, - memcg->memory.low, READ_ONCE(parent->memory.elow), + READ_ONCE(memcg->memory.low), + READ_ONCE(parent->memory.elow), atomic_long_read(&parent->memory.children_low_usage))); out: From f9e559703d0899cc74684128244682182157aa64 Mon Sep 17 00:00:00 2001 From: Souptick Joarder Date: Thu, 25 Jun 2020 20:30:25 -0700 Subject: [PATCH 542/618] docs: mm/gup: minor documentation update Now there are 5 cases. Updated the same. Link: http://lkml.kernel.org/r/1592422023-7401-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Souptick Joarder Reviewed-by: John Hubbard Cc: Jonathan Corbet Cc: Jan Kara Cc: Kirill A. Shutemov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/core-api/pin_user_pages.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/core-api/pin_user_pages.rst b/Documentation/core-api/pin_user_pages.rst index 6068266dd303..7ca8c7bac650 100644 --- a/Documentation/core-api/pin_user_pages.rst +++ b/Documentation/core-api/pin_user_pages.rst @@ -33,7 +33,7 @@ all combinations of get*(), pin*(), FOLL_LONGTERM, and more. Also, the pin_user_pages*() APIs are clearly distinct from the get_user_pages*() APIs, so that's a natural dividing line, and a good point to make separate wrapper calls. In other words, use pin_user_pages*() for DMA-pinned pages, and -get_user_pages*() for other cases. There are four cases described later on in +get_user_pages*() for other cases. There are five cases described later on in this document, to further clarify that concept. FOLL_PIN and FOLL_GET are mutually exclusive for a given gup call. However, From 2a8bef321749219a6f236dc9f5ee5571a5f1efc6 Mon Sep 17 00:00:00 2001 From: Yang Shi Date: Thu, 25 Jun 2020 20:30:28 -0700 Subject: [PATCH 543/618] doc: THP CoW fault no longer allocate THP Since commit 3917c80280c9 ("thp: change CoW semantics for anon-THP"), THP CoW page fault is rewritten. Now it just splits pmd then fallback to base page fault, it doesn't try to allocate THP anymore. So it is no longer counted in THP_FAULT_ALLOC. Remove the obsolete statement in documentation about THP CoW allocation to avoid confusion. Link: http://lkml.kernel.org/r/1592424895-5421-1-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi Cc: Kirill A. Shutemov Cc: Zi Yan Cc: Jonathan Corbet Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/admin-guide/cgroup-v2.rst | 4 ++-- Documentation/admin-guide/mm/transhuge.rst | 3 +-- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index ce3e05e41724..d09471aa7443 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -1356,8 +1356,8 @@ PAGE_SIZE multiple when read back. thp_fault_alloc Number of transparent hugepages which were allocated to satisfy - a page fault, including COW faults. This counter is not present - when CONFIG_TRANSPARENT_HUGEPAGE is not set. + a page fault. This counter is not present when CONFIG_TRANSPARENT_HUGEPAGE + is not set. thp_collapse_alloc Number of transparent hugepages which were allocated to allow diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst index 6a233e42be08..b2acd0d395ca 100644 --- a/Documentation/admin-guide/mm/transhuge.rst +++ b/Documentation/admin-guide/mm/transhuge.rst @@ -305,8 +305,7 @@ monitor how successfully the system is providing huge pages for use. thp_fault_alloc is incremented every time a huge page is successfully - allocated to handle a page fault. This applies to both the - first time a page is faulted and for COW faults. + allocated to handle a page fault. thp_collapse_alloc is incremented by khugepaged when it has found From 31d8fcac00fcf4007f3921edc69ab4dcb3abcd4d Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 25 Jun 2020 20:30:31 -0700 Subject: [PATCH 544/618] mm: workingset: age nonresident information alongside anonymous pages Patch series "fix for "mm: balance LRU lists based on relative thrashing" patchset" This patchset fixes some problems of the patchset, "mm: balance LRU lists based on relative thrashing", which is now merged on the mainline. Patch "mm: workingset: let cache workingset challenge anon fix" is the result of discussion with Johannes. See following link. http://lkml.kernel.org/r/20200520232525.798933-6-hannes@cmpxchg.org And, the other two are minor things which are found when I try to rebase my patchset. This patch (of 3): After ("mm: workingset: let cache workingset challenge anon fix"), we compare refault distances to active_file + anon. But age of the non-resident information is only driven by the file LRU. As a result, we may overestimate the recency of any incoming refaults and activate them too eagerly, causing unnecessary LRU churn in certain situations. Make anon aging drive nonresident age as well to address that. Link: http://lkml.kernel.org/r/1592288204-27734-1-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1592288204-27734-2-git-send-email-iamjoonsoo.kim@lge.com Fixes: 34e58cac6d8f2a ("mm: workingset: let cache workingset challenge anon") Reported-by: Joonsoo Kim Signed-off-by: Johannes Weiner Signed-off-by: Joonsoo Kim Cc: Rik van Riel Cc: Minchan Kim Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 4 ++-- include/linux/swap.h | 1 + mm/vmscan.c | 3 +++ mm/workingset.c | 46 +++++++++++++++++++++++++----------------- 4 files changed, 33 insertions(+), 21 deletions(-) diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index c4c37fd12104..f6f884970511 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -257,8 +257,8 @@ struct lruvec { */ unsigned long anon_cost; unsigned long file_cost; - /* Evictions & activations on the inactive file list */ - atomic_long_t inactive_age; + /* Non-resident age, driven by LRU movement */ + atomic_long_t nonresident_age; /* Refaults at the time of last reclaim cycle */ unsigned long refaults; /* Various lruvec state flags (enum lruvec_flags) */ diff --git a/include/linux/swap.h b/include/linux/swap.h index 4c5974bb9ba9..5b3216ba39a9 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -313,6 +313,7 @@ struct vma_swap_readahead { }; /* linux/mm/workingset.c */ +void workingset_age_nonresident(struct lruvec *lruvec, unsigned long nr_pages); void *workingset_eviction(struct page *page, struct mem_cgroup *target_memcg); void workingset_refault(struct page *page, void *shadow); void workingset_activation(struct page *page); diff --git a/mm/vmscan.c b/mm/vmscan.c index b6d84326bdf2..749d239c62b2 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -904,6 +904,7 @@ static int __remove_mapping(struct address_space *mapping, struct page *page, __delete_from_swap_cache(page, swap); xa_unlock_irqrestore(&mapping->i_pages, flags); put_swap_page(page, swap); + workingset_eviction(page, target_memcg); } else { void (*freepage)(struct page *); void *shadow = NULL; @@ -1884,6 +1885,8 @@ static unsigned noinline_for_stack move_pages_to_lru(struct lruvec *lruvec, list_add(&page->lru, &pages_to_free); } else { nr_moved += nr_pages; + if (PageActive(page)) + workingset_age_nonresident(lruvec, nr_pages); } } diff --git a/mm/workingset.c b/mm/workingset.c index d481ea452eeb..50b7937bab32 100644 --- a/mm/workingset.c +++ b/mm/workingset.c @@ -156,8 +156,8 @@ * * Implementation * - * For each node's file LRU lists, a counter for inactive evictions - * and activations is maintained (node->inactive_age). + * For each node's LRU lists, a counter for inactive evictions and + * activations is maintained (node->nonresident_age). * * On eviction, a snapshot of this counter (along with some bits to * identify the node) is stored in the now empty page cache @@ -213,7 +213,17 @@ static void unpack_shadow(void *shadow, int *memcgidp, pg_data_t **pgdat, *workingsetp = workingset; } -static void advance_inactive_age(struct mem_cgroup *memcg, pg_data_t *pgdat) +/** + * workingset_age_nonresident - age non-resident entries as LRU ages + * @memcg: the lruvec that was aged + * @nr_pages: the number of pages to count + * + * As in-memory pages are aged, non-resident pages need to be aged as + * well, in order for the refault distances later on to be comparable + * to the in-memory dimensions. This function allows reclaim and LRU + * operations to drive the non-resident aging along in parallel. + */ +void workingset_age_nonresident(struct lruvec *lruvec, unsigned long nr_pages) { /* * Reclaiming a cgroup means reclaiming all its children in a @@ -227,11 +237,8 @@ static void advance_inactive_age(struct mem_cgroup *memcg, pg_data_t *pgdat) * the root cgroup's, age as well. */ do { - struct lruvec *lruvec; - - lruvec = mem_cgroup_lruvec(memcg, pgdat); - atomic_long_inc(&lruvec->inactive_age); - } while (memcg && (memcg = parent_mem_cgroup(memcg))); + atomic_long_add(nr_pages, &lruvec->nonresident_age); + } while ((lruvec = parent_lruvec(lruvec))); } /** @@ -254,12 +261,11 @@ void *workingset_eviction(struct page *page, struct mem_cgroup *target_memcg) VM_BUG_ON_PAGE(page_count(page), page); VM_BUG_ON_PAGE(!PageLocked(page), page); - advance_inactive_age(page_memcg(page), pgdat); - lruvec = mem_cgroup_lruvec(target_memcg, pgdat); + workingset_age_nonresident(lruvec, hpage_nr_pages(page)); /* XXX: target_memcg can be NULL, go through lruvec */ memcgid = mem_cgroup_id(lruvec_memcg(lruvec)); - eviction = atomic_long_read(&lruvec->inactive_age); + eviction = atomic_long_read(&lruvec->nonresident_age); return pack_shadow(memcgid, pgdat, eviction, PageWorkingset(page)); } @@ -309,20 +315,20 @@ void workingset_refault(struct page *page, void *shadow) if (!mem_cgroup_disabled() && !eviction_memcg) goto out; eviction_lruvec = mem_cgroup_lruvec(eviction_memcg, pgdat); - refault = atomic_long_read(&eviction_lruvec->inactive_age); + refault = atomic_long_read(&eviction_lruvec->nonresident_age); /* * Calculate the refault distance * * The unsigned subtraction here gives an accurate distance - * across inactive_age overflows in most cases. There is a + * across nonresident_age overflows in most cases. There is a * special case: usually, shadow entries have a short lifetime * and are either refaulted or reclaimed along with the inode * before they get too old. But it is not impossible for the - * inactive_age to lap a shadow entry in the field, which can - * then result in a false small refault distance, leading to a - * false activation should this old entry actually refault - * again. However, earlier kernels used to deactivate + * nonresident_age to lap a shadow entry in the field, which + * can then result in a false small refault distance, leading + * to a false activation should this old entry actually + * refault again. However, earlier kernels used to deactivate * unconditionally with *every* reclaim invocation for the * longest time, so the occasional inappropriate activation * leading to pressure on the active list is not a problem. @@ -359,7 +365,7 @@ void workingset_refault(struct page *page, void *shadow) goto out; SetPageActive(page); - advance_inactive_age(memcg, pgdat); + workingset_age_nonresident(lruvec, hpage_nr_pages(page)); inc_lruvec_state(lruvec, WORKINGSET_ACTIVATE); /* Page was active prior to eviction */ @@ -382,6 +388,7 @@ void workingset_refault(struct page *page, void *shadow) void workingset_activation(struct page *page) { struct mem_cgroup *memcg; + struct lruvec *lruvec; rcu_read_lock(); /* @@ -394,7 +401,8 @@ void workingset_activation(struct page *page) memcg = page_memcg_rcu(page); if (!mem_cgroup_disabled() && !memcg) goto out; - advance_inactive_age(memcg, page_pgdat(page)); + lruvec = mem_cgroup_page_lruvec(page, page_pgdat(page)); + workingset_age_nonresident(lruvec, hpage_nr_pages(page)); out: rcu_read_unlock(); } From cb6868832ede5cd73b346ec11cf89814d26ff7c7 Mon Sep 17 00:00:00 2001 From: Joonsoo Kim Date: Thu, 25 Jun 2020 20:30:34 -0700 Subject: [PATCH 545/618] mm/swap: fix for "mm: workingset: age nonresident information alongside anonymous pages" Non-file-lru page could also be activated in mark_page_accessed() and we need to count this activation for nonresident_age. Note that it's better for this patch to be squashed into the patch "mm: workingset: age nonresident information alongside anonymous pages". Link: http://lkml.kernel.org/r/1592288204-27734-3-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim Acked-by: Johannes Weiner Cc: Joonsoo Kim Cc: Michal Hocko Cc: Minchan Kim Cc: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/swap.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/mm/swap.c b/mm/swap.c index dbcab84c6fce..a82efc33411f 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -443,8 +443,7 @@ void mark_page_accessed(struct page *page) else __lru_cache_activate_page(page); ClearPageReferenced(page); - if (page_is_file_lru(page)) - workingset_activation(page); + workingset_activation(page); } if (page_is_idle(page)) clear_page_idle(page); From 0076f029cb2906d32baf3bf4401ef09663071d16 Mon Sep 17 00:00:00 2001 From: Joonsoo Kim Date: Thu, 25 Jun 2020 20:30:37 -0700 Subject: [PATCH 546/618] mm/memory: fix IO cost for anonymous page With synchronous IO swap device, swap-in is directly handled in fault code. Since IO cost notation isn't added there, with synchronous IO swap device, LRU balancing could be wrongly biased. Fix it to count it in fault code. Link: http://lkml.kernel.org/r/1592288204-27734-4-git-send-email-iamjoonsoo.kim@lge.com Fixes: 314b57fb0460001 ("mm: balance LRU lists based on relative thrashing cache sizing") Signed-off-by: Joonsoo Kim Acked-by: Johannes Weiner Cc: Joonsoo Kim Cc: Michal Hocko Cc: Minchan Kim Cc: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/mm/memory.c b/mm/memory.c index 0e5b25c9b151..87ec87cdc1ff 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -3146,6 +3146,14 @@ vm_fault_t do_swap_page(struct vm_fault *vmf) goto out_page; } + /* + * XXX: Move to lru_cache_add() when it + * supports new vs putback + */ + spin_lock_irq(&page_pgdat(page)->lru_lock); + lru_note_cost_page(page); + spin_unlock_irq(&page_pgdat(page)->lru_lock); + lru_cache_add(page); swap_readpage(page, true); } From 800e26b81311dcc0080b8784f80620bb8f2baaa5 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 25 Jun 2020 20:30:40 -0700 Subject: [PATCH 547/618] x86/hyperv: allocate the hypercall page with only read and execute bits Patch series "fix a hyperv W^X violation and remove vmalloc_exec" Dexuan reported a W^X violation due to the fact that the hyper hypercall page due switching it to be allocated using vmalloc_exec. The problem is that PAGE_KERNEL_EXEC as used by vmalloc_exec actually sets writable permissions in the pte. This series fixes the issue by switching to the low-level __vmalloc_node_range interface that allows specifing more detailed permissions instead. It then also open codes the other two callers and removes the somewhat confusing vmalloc_exec interface. Peter noted that the hyper hypercall page allocation also has another long standing issue in that it shouldn't use the full vmalloc but just the module space. This issue is so far theoretical as the allocation is done early in the boot process. I plan to fix it with another bigger series for 5.9. This patch (of 3): Avoid a W^X violation cause by the fact that PAGE_KERNEL_EXEC includes the writable bit. For this resurrect the removed PAGE_KERNEL_RX definition, but as PAGE_KERNEL_ROX to match arm64 and powerpc. Link: http://lkml.kernel.org/r/20200618064307.32739-2-hch@lst.de Fixes: 78bb17f76edc ("x86/hyperv: use vmalloc_exec for the hypercall page") Signed-off-by: Christoph Hellwig Reported-by: Dexuan Cui Tested-by: Vitaly Kuznetsov Acked-by: Wei Liu Acked-by: Peter Zijlstra (Intel) Cc: Catalin Marinas Cc: Will Deacon Cc: Jessica Yu Cc: David Hildenbrand Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/hyperv/hv_init.c | 4 +++- arch/x86/include/asm/pgtable_types.h | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c index a54c6a401581..2bdc72e6890e 100644 --- a/arch/x86/hyperv/hv_init.c +++ b/arch/x86/hyperv/hv_init.c @@ -375,7 +375,9 @@ void __init hyperv_init(void) guest_id = generate_guest_id(0, LINUX_VERSION_CODE, 0); wrmsrl(HV_X64_MSR_GUEST_OS_ID, guest_id); - hv_hypercall_pg = vmalloc_exec(PAGE_SIZE); + hv_hypercall_pg = __vmalloc_node_range(PAGE_SIZE, 1, VMALLOC_START, + VMALLOC_END, GFP_KERNEL, PAGE_KERNEL_ROX, + VM_FLUSH_RESET_PERMS, NUMA_NO_NODE, __func__); if (hv_hypercall_pg == NULL) { wrmsrl(HV_X64_MSR_GUEST_OS_ID, 0); goto remove_cpuhp_state; diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h index 2da1f95b88d7..816b31c68550 100644 --- a/arch/x86/include/asm/pgtable_types.h +++ b/arch/x86/include/asm/pgtable_types.h @@ -194,6 +194,7 @@ enum page_cache_mode { #define _PAGE_TABLE_NOENC (__PP|__RW|_USR|___A| 0|___D| 0| 0) #define _PAGE_TABLE (__PP|__RW|_USR|___A| 0|___D| 0| 0| _ENC) #define __PAGE_KERNEL_RO (__PP| 0| 0|___A|__NX|___D| 0|___G) +#define __PAGE_KERNEL_ROX (__PP| 0| 0|___A| 0|___D| 0|___G) #define __PAGE_KERNEL_NOCACHE (__PP|__RW| 0|___A|__NX|___D| 0|___G| __NC) #define __PAGE_KERNEL_VVAR (__PP| 0|_USR|___A|__NX|___D| 0|___G) #define __PAGE_KERNEL_LARGE (__PP|__RW| 0|___A|__NX|___D|_PSE|___G) @@ -219,6 +220,7 @@ enum page_cache_mode { #define PAGE_KERNEL_RO __pgprot_mask(__PAGE_KERNEL_RO | _ENC) #define PAGE_KERNEL_EXEC __pgprot_mask(__PAGE_KERNEL_EXEC | _ENC) #define PAGE_KERNEL_EXEC_NOENC __pgprot_mask(__PAGE_KERNEL_EXEC | 0) +#define PAGE_KERNEL_ROX __pgprot_mask(__PAGE_KERNEL_ROX | _ENC) #define PAGE_KERNEL_NOCACHE __pgprot_mask(__PAGE_KERNEL_NOCACHE | _ENC) #define PAGE_KERNEL_LARGE __pgprot_mask(__PAGE_KERNEL_LARGE | _ENC) #define PAGE_KERNEL_LARGE_EXEC __pgprot_mask(__PAGE_KERNEL_LARGE_EXEC | _ENC) From 10d5e97c1bf816facbc7c431c6caf47ee35fc1ed Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 25 Jun 2020 20:30:43 -0700 Subject: [PATCH 548/618] arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page Use PAGE_KERNEL_ROX directly instead of allocating RWX and setting the page read-only just after the allocation. Link: http://lkml.kernel.org/r/20200618064307.32739-3-hch@lst.de Signed-off-by: Christoph Hellwig Acked-by: David Hildenbrand Acked-by: Peter Zijlstra (Intel) Cc: Catalin Marinas Cc: Dexuan Cui Cc: Jessica Yu Cc: Vitaly Kuznetsov Cc: Wei Liu Cc: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm64/kernel/probes/kprobes.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c index d1c95dcf1d78..cbe49cd117cf 100644 --- a/arch/arm64/kernel/probes/kprobes.c +++ b/arch/arm64/kernel/probes/kprobes.c @@ -120,15 +120,9 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) void *alloc_insn_page(void) { - void *page; - - page = vmalloc_exec(PAGE_SIZE); - if (page) { - set_memory_ro((unsigned long)page, 1); - set_vm_flush_reset_perms(page); - } - - return page; + return __vmalloc_node_range(PAGE_SIZE, 1, VMALLOC_START, VMALLOC_END, + GFP_KERNEL, PAGE_KERNEL_ROX, VM_FLUSH_RESET_PERMS, + NUMA_NO_NODE, __func__); } /* arm kprobe: install breakpoint in text */ From 7a0e27b2a0ce2735e27e21ebc8b777550fe0ed81 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 25 Jun 2020 20:30:47 -0700 Subject: [PATCH 549/618] mm: remove vmalloc_exec Merge vmalloc_exec into its only caller. Note that for !CONFIG_MMU __vmalloc_node_range maps to __vmalloc, which directly clears the __GFP_HIGHMEM added by the vmalloc_exec stub anyway. Link: http://lkml.kernel.org/r/20200618064307.32739-4-hch@lst.de Signed-off-by: Christoph Hellwig Reviewed-by: David Hildenbrand Acked-by: Peter Zijlstra (Intel) Cc: Catalin Marinas Cc: Dexuan Cui Cc: Jessica Yu Cc: Vitaly Kuznetsov Cc: Wei Liu Cc: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/vmalloc.h | 1 - kernel/module.c | 4 +++- mm/nommu.c | 17 ----------------- mm/vmalloc.c | 20 -------------------- 4 files changed, 3 insertions(+), 39 deletions(-) diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index 48bb681e6c2a..0221f852a7e1 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -106,7 +106,6 @@ extern void *vzalloc(unsigned long size); extern void *vmalloc_user(unsigned long size); extern void *vmalloc_node(unsigned long size, int node); extern void *vzalloc_node(unsigned long size, int node); -extern void *vmalloc_exec(unsigned long size); extern void *vmalloc_32(unsigned long size); extern void *vmalloc_32_user(unsigned long size); extern void *__vmalloc(unsigned long size, gfp_t gfp_mask); diff --git a/kernel/module.c b/kernel/module.c index e8a198588f26..0c6573b98c36 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -2783,7 +2783,9 @@ static void dynamic_debug_remove(struct module *mod, struct _ddebug *debug) void * __weak module_alloc(unsigned long size) { - return vmalloc_exec(size); + return __vmalloc_node_range(size, 1, VMALLOC_START, VMALLOC_END, + GFP_KERNEL, PAGE_KERNEL_EXEC, VM_FLUSH_RESET_PERMS, + NUMA_NO_NODE, __func__); } bool __weak module_init_section(const char *name) diff --git a/mm/nommu.c b/mm/nommu.c index cdcad5d61dd1..f32a69095d50 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -290,23 +290,6 @@ void *vzalloc_node(unsigned long size, int node) } EXPORT_SYMBOL(vzalloc_node); -/** - * vmalloc_exec - allocate virtually contiguous, executable memory - * @size: allocation size - * - * Kernel-internal function to allocate enough pages to cover @size - * the page level allocator and map them into contiguous and - * executable kernel virtual space. - * - * For tight control over page level allocator and protection flags - * use __vmalloc() instead. - */ - -void *vmalloc_exec(unsigned long size) -{ - return __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM); -} - /** * vmalloc_32 - allocate virtually contiguous memory (32bit addressable) * @size: allocation size diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 957a0be77270..5a2b55c8dd9a 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -2695,26 +2695,6 @@ void *vzalloc_node(unsigned long size, int node) } EXPORT_SYMBOL(vzalloc_node); -/** - * vmalloc_exec - allocate virtually contiguous, executable memory - * @size: allocation size - * - * Kernel-internal function to allocate enough pages to cover @size - * the page level allocator and map them into contiguous and - * executable kernel virtual space. - * - * For tight control over page level allocator and protection flags - * use __vmalloc() instead. - * - * Return: pointer to the allocated memory or %NULL on error - */ -void *vmalloc_exec(unsigned long size) -{ - return __vmalloc_node_range(size, 1, VMALLOC_START, VMALLOC_END, - GFP_KERNEL, PAGE_KERNEL_EXEC, VM_FLUSH_RESET_PERMS, - NUMA_NO_NODE, __builtin_return_address(0)); -} - #if defined(CONFIG_64BIT) && defined(CONFIG_ZONE_DMA32) #define GFP_VMALLOC32 (GFP_DMA32 | GFP_KERNEL) #elif defined(CONFIG_64BIT) && defined(CONFIG_ZONE_DMA) From b7e3debdd0408c0dca5d4750371afa5003f792dc Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Thu, 25 Jun 2020 20:30:51 -0700 Subject: [PATCH 550/618] mm/memory_hotplug.c: fix false softlockup during pfn range removal When working with very large nodes, poisoning the struct pages (for which there will be very many) can take a very long time. If the system is using voluntary preemptions, the software watchdog will not be able to detect forward progress. This patch addresses this issue by offering to give up time like __remove_pages() does. This behavior was introduced in v5.6 with: commit d33695b16a9f ("mm/memory_hotplug: poison memmap in remove_pfn_range_from_zone()") Alternately, init_page_poison could do this cond_resched(), but it seems to me that the caller of init_page_poison() is what actually knows whether or not it should relax its own priority. Based on Dan's notes, I think this is perfectly safe: commit f931ab479dd2 ("mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}") Aside from fixing the lockup, it is also a friendlier thing to do on lower core systems that might wipe out large chunks of hotplug memory (probably not a very common case). Fixes this kind of splat: watchdog: BUG: soft lockup - CPU#46 stuck for 22s! [daxctl:9922] irq event stamp: 138450 hardirqs last enabled at (138449): [] trace_hardirqs_on_thunk+0x1a/0x1c hardirqs last disabled at (138450): [] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (138448): [] __do_softirq+0x347/0x456 softirqs last disabled at (138443): [] irq_exit+0x7d/0xb0 CPU: 46 PID: 9922 Comm: daxctl Not tainted 5.7.0-BEN-14238-g373c6049b336 #30 Hardware name: Intel Corporation PURLEY/PURLEY, BIOS PLYXCRB1.86B.0578.D07.1902280810 02/28/2019 RIP: 0010:memset_erms+0x9/0x10 Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01 Call Trace: remove_pfn_range_from_zone+0x3a/0x380 memunmap_pages+0x17f/0x280 release_nodes+0x22a/0x260 __device_release_driver+0x172/0x220 device_driver_detach+0x3e/0xa0 unbind_store+0x113/0x130 kernfs_fop_write+0xdc/0x1c0 vfs_write+0xde/0x1d0 ksys_write+0x58/0xd0 do_syscall_64+0x5a/0x120 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Built 2 zonelists, mobility grouping on. Total pages: 49050381 Policy zone: Normal Built 3 zonelists, mobility grouping on. Total pages: 49312525 Policy zone: Normal David said: "It really only is an issue for devmem. Ordinary hotplugged system memory is not affected (onlined/offlined in memory block granularity)." Link: http://lkml.kernel.org/r/20200619231213.1160351-1-ben.widawsky@intel.com Fixes: commit d33695b16a9f ("mm/memory_hotplug: poison memmap in remove_pfn_range_from_zone()") Signed-off-by: Ben Widawsky Reported-by: "Scargall, Steve" Reported-by: Ben Widawsky Acked-by: David Hildenbrand Cc: Dan Williams Cc: Vishal Verma Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory_hotplug.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 9b34e03e730a..da374cd3d45b 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -471,11 +471,20 @@ void __ref remove_pfn_range_from_zone(struct zone *zone, unsigned long start_pfn, unsigned long nr_pages) { + const unsigned long end_pfn = start_pfn + nr_pages; struct pglist_data *pgdat = zone->zone_pgdat; - unsigned long flags; + unsigned long pfn, cur_nr_pages, flags; /* Poison struct pages because they are now uninitialized again. */ - page_init_poison(pfn_to_page(start_pfn), sizeof(struct page) * nr_pages); + for (pfn = start_pfn; pfn < end_pfn; pfn += cur_nr_pages) { + cond_resched(); + + /* Select all remaining pages up to the next section boundary */ + cur_nr_pages = + min(end_pfn - pfn, SECTION_ALIGN_UP(pfn + 1) - pfn); + page_init_poison(pfn_to_page(pfn), + sizeof(struct page) * cur_nr_pages); + } #ifdef CONFIG_ZONE_DEVICE /* From 19ef1f9dfeffe2bfbeaf624277a179b1c0eef201 Mon Sep 17 00:00:00 2001 From: Luc Van Oostenryck Date: Thu, 25 Jun 2020 20:30:54 -0700 Subject: [PATCH 551/618] MAINTAINERS: update info for sparse Update the info for sparse. More specifically: - change W entry to point to sparse.docs.kernel.org - add Q & B entry (patchwork & bugzilla) Link: http://lkml.kernel.org/r/20200621144204.53938-1-luc.vanoostenryck@gmail.com Signed-off-by: Luc Van Oostenryck Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 7b5ffd646c6b..f7f4513f09b6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16058,8 +16058,10 @@ SPARSE CHECKER M: "Luc Van Oostenryck" L: linux-sparse@vger.kernel.org S: Maintained -W: https://sparse.wiki.kernel.org/ +W: https://sparse.docs.kernel.org/ T: git git://git.kernel.org/pub/scm/devel/sparse/sparse.git +Q: https://patchwork.kernel.org/project/linux-sparse/list/ +B: https://bugzilla.kernel.org/enter_bug.cgi?component=Sparse&product=Tools F: include/linux/compiler.h SPEAR CLOCK FRAMEWORK SUPPORT From 40e05200593af06633f64ab0effff052eee6f076 Mon Sep 17 00:00:00 2001 From: Mans Rullgard Date: Sat, 13 Jun 2020 11:41:09 +0100 Subject: [PATCH 552/618] i2c: core: check returned size of emulated smbus block read If the i2c bus driver ignores the I2C_M_RECV_LEN flag (as some of them do), it is possible for an I2C_SMBUS_BLOCK_DATA read issued on some random device to return an arbitrary value in the first byte (and nothing else). When this happens, i2c_smbus_xfer_emulated() will happily write past the end of the supplied data buffer, thus causing Bad Things to happen. To prevent this, check the size before copying the data block and return an error if it is too large. Fixes: 209d27c3b167 ("i2c: Emulate SMBus block read over I2C") Signed-off-by: Mans Rullgard [wsa: use better errno] Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core-smbus.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c index 56bb840142e3..f5c9787992e9 100644 --- a/drivers/i2c/i2c-core-smbus.c +++ b/drivers/i2c/i2c-core-smbus.c @@ -495,6 +495,13 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, break; case I2C_SMBUS_BLOCK_DATA: case I2C_SMBUS_BLOCK_PROC_CALL: + if (msg[1].buf[0] > I2C_SMBUS_BLOCK_MAX) { + dev_err(&adapter->dev, + "Invalid block size returned: %d\n", + msg[1].buf[0]); + status = -EPROTO; + goto cleanup; + } for (i = 0; i < msg[1].buf[0] + 1; i++) data->block[i] = msg[1].buf[i]; break; From b7ade38165ca0001c5a3bd5314a314abbbfbb1b7 Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Mon, 1 Jun 2020 11:54:57 +0300 Subject: [PATCH 553/618] sunrpc: fixed rollback in rpc_gssd_dummy_populate() __rpc_depopulate(gssd_dentry) was lost on error path cc: stable@vger.kernel.org Fixes: commit 4b9a445e3eeb ("sunrpc: create a new dummy pipe for gssd to hold open") Signed-off-by: Vasily Averin Reviewed-by: Jeff Layton Signed-off-by: Anna Schumaker --- net/sunrpc/rpc_pipe.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index 39e14d5edaf1..e9d0953522f0 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -1317,6 +1317,7 @@ rpc_gssd_dummy_populate(struct dentry *root, struct rpc_pipe *pipe_data) q.len = strlen(gssd_dummy_clnt_dir[0].name); clnt_dentry = d_hash_and_lookup(gssd_dentry, &q); if (!clnt_dentry) { + __rpc_depopulate(gssd_dentry, gssd_dummy_clnt_dir, 0, 1); pipe_dentry = ERR_PTR(-ENOENT); goto out; } From 4659ed7cc8514369043053463514408ca16ad6f3 Mon Sep 17 00:00:00 2001 From: Tom Rix Date: Fri, 12 Jun 2020 15:45:49 -0700 Subject: [PATCH 554/618] nfs: Fix memory leak of export_path The try_location function is called within a loop by nfs_follow_referral. try_location calls nfs4_pathname_string to created the export_path. nfs4_pathname_string allocates the memory. export_path is stored in the nfs_fs_context/fs_context structure similarly as hostname and source. But whereas the ctx hostname and source are freed before assignment, export_path is not. So if there are multiple loops, the new export_path will overwrite the old without the old being freed. So call kfree for export_path. Signed-off-by: Tom Rix Signed-off-by: Anna Schumaker --- fs/nfs/nfs4namespace.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c index a3ab6e219061..873342308dc0 100644 --- a/fs/nfs/nfs4namespace.c +++ b/fs/nfs/nfs4namespace.c @@ -308,6 +308,7 @@ static int try_location(struct fs_context *fc, if (IS_ERR(export_path)) return PTR_ERR(export_path); + kfree(ctx->nfs_server.export_path); ctx->nfs_server.export_path = export_path; source = kmalloc(len + 1 + ctx->nfs_server.export_path_len + 1, From 8b04013737341442ed914b336cde866b902664ae Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 22 Jun 2020 15:04:15 -0400 Subject: [PATCH 555/618] pNFS/flexfiles: Fix list corruption if the mirror count changes If the mirror count changes in the new layout we pick up inside ff_layout_pg_init_write(), then we can end up adding the request to the wrong mirror and corrupting the mirror->pg_list. Fixes: d600ad1f2bdb ("NFS41: pop some layoutget errors to application") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker --- fs/nfs/flexfilelayout/flexfilelayout.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/fs/nfs/flexfilelayout/flexfilelayout.c b/fs/nfs/flexfilelayout/flexfilelayout.c index 7d399f72ebbb..de03e440b7ee 100644 --- a/fs/nfs/flexfilelayout/flexfilelayout.c +++ b/fs/nfs/flexfilelayout/flexfilelayout.c @@ -907,9 +907,8 @@ ff_layout_pg_init_write(struct nfs_pageio_descriptor *pgio, goto out_mds; /* Use a direct mapping of ds_idx to pgio mirror_idx */ - if (WARN_ON_ONCE(pgio->pg_mirror_count != - FF_LAYOUT_MIRROR_COUNT(pgio->pg_lseg))) - goto out_mds; + if (pgio->pg_mirror_count != FF_LAYOUT_MIRROR_COUNT(pgio->pg_lseg)) + goto out_eagain; for (i = 0; i < pgio->pg_mirror_count; i++) { mirror = FF_LAYOUT_COMP(pgio->pg_lseg, i); @@ -931,7 +930,10 @@ ff_layout_pg_init_write(struct nfs_pageio_descriptor *pgio, (NFS_MOUNT_SOFT|NFS_MOUNT_SOFTERR)) pgio->pg_maxretrans = io_maxretrans; return; - +out_eagain: + pnfs_generic_pg_cleanup(pgio); + pgio->pg_error = -EAGAIN; + return; out_mds: trace_pnfs_mds_fallback_pg_init_write(pgio->pg_inode, 0, NFS4_MAX_UINT64, IOMODE_RW, @@ -941,6 +943,7 @@ ff_layout_pg_init_write(struct nfs_pageio_descriptor *pgio, pgio->pg_lseg = NULL; pgio->pg_maxretrans = 0; nfs_pageio_reset_write_mds(pgio); + pgio->pg_error = -EAGAIN; } static unsigned int From d03727b248d0dae6199569a8d7b629a681154633 Mon Sep 17 00:00:00 2001 From: Olga Kornievskaia Date: Wed, 24 Jun 2020 13:54:08 -0400 Subject: [PATCH 556/618] NFSv4 fix CLOSE not waiting for direct IO compeletion Figuring out the root case for the REMOVE/CLOSE race and suggesting the solution was done by Neil Brown. Currently what happens is that direct IO calls hold a reference on the open context which is decremented as an asynchronous task in the nfs_direct_complete(). Before reference is decremented, control is returned to the application which is free to close the file. When close is being processed, it decrements its reference on the open_context but since directIO still holds one, it doesn't sent a close on the wire. It returns control to the application which is free to do other operations. For instance, it can delete a file. Direct IO is finally releasing its reference and triggering an asynchronous close. Which races with the REMOVE. On the server, REMOVE can be processed before the CLOSE, failing the REMOVE with EACCES as the file is still opened. Signed-off-by: Olga Kornievskaia Suggested-by: Neil Brown CC: stable@vger.kernel.org Signed-off-by: Anna Schumaker --- fs/nfs/direct.c | 13 +++++++++---- fs/nfs/file.c | 1 + 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index 1b79dd5cf661..3d113cf8908a 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -267,8 +267,6 @@ static void nfs_direct_complete(struct nfs_direct_req *dreq) { struct inode *inode = dreq->inode; - inode_dio_end(inode); - if (dreq->iocb) { long res = (long) dreq->error; if (dreq->count != 0) { @@ -280,7 +278,10 @@ static void nfs_direct_complete(struct nfs_direct_req *dreq) complete(&dreq->completion); + igrab(inode); nfs_direct_req_release(dreq); + inode_dio_end(inode); + iput(inode); } static void nfs_direct_read_completion(struct nfs_pgio_header *hdr) @@ -410,8 +411,10 @@ static ssize_t nfs_direct_read_schedule_iovec(struct nfs_direct_req *dreq, * generic layer handle the completion. */ if (requested_bytes == 0) { - inode_dio_end(inode); + igrab(inode); nfs_direct_req_release(dreq); + inode_dio_end(inode); + iput(inode); return result < 0 ? result : -EIO; } @@ -864,8 +867,10 @@ static ssize_t nfs_direct_write_schedule_iovec(struct nfs_direct_req *dreq, * generic layer handle the completion. */ if (requested_bytes == 0) { - inode_dio_end(inode); + igrab(inode); nfs_direct_req_release(dreq); + inode_dio_end(inode); + iput(inode); return result < 0 ? result : -EIO; } diff --git a/fs/nfs/file.c b/fs/nfs/file.c index f96367a2463e..ccd6c1637b27 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -83,6 +83,7 @@ nfs_file_release(struct inode *inode, struct file *filp) dprintk("NFS: release(%pD2)\n", filp); nfs_inc_stats(inode, NFSIOS_VFSRELEASE); + inode_dio_wait(inode); nfs_file_clear_open_context(filp); return 0; } From 89a3c9f5b9f0bcaa9aea3e8b2a616fcaea9aad78 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 25 Jun 2020 11:32:34 -0400 Subject: [PATCH 557/618] SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment() @subbuf is an output parameter of xdr_buf_subsegment(). A survey of call sites shows that @subbuf is always uninitialized before xdr_buf_segment() is invoked by callers. There are some execution paths through xdr_buf_subsegment() that do not set all of the fields in @subbuf, leaving some pointer fields containing garbage addresses. Subsequent processing of that buffer then results in a page fault. Signed-off-by: Chuck Lever Cc: Signed-off-by: Anna Schumaker --- net/sunrpc/xdr.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/sunrpc/xdr.c b/net/sunrpc/xdr.c index 6f7d82fb1eb0..be11d672b5b9 100644 --- a/net/sunrpc/xdr.c +++ b/net/sunrpc/xdr.c @@ -1118,6 +1118,7 @@ xdr_buf_subsegment(struct xdr_buf *buf, struct xdr_buf *subbuf, base = 0; } else { base -= buf->head[0].iov_len; + subbuf->head[0].iov_base = buf->head[0].iov_base; subbuf->head[0].iov_len = 0; } @@ -1130,6 +1131,8 @@ xdr_buf_subsegment(struct xdr_buf *buf, struct xdr_buf *subbuf, base = 0; } else { base -= buf->page_len; + subbuf->pages = buf->pages; + subbuf->page_base = 0; subbuf->page_len = 0; } @@ -1141,6 +1144,7 @@ xdr_buf_subsegment(struct xdr_buf *buf, struct xdr_buf *subbuf, base = 0; } else { base -= buf->tail[0].iov_len; + subbuf->tail[0].iov_base = buf->tail[0].iov_base; subbuf->tail[0].iov_len = 0; } From 5946d1f5b309381805bad3ddc3054c04f4ae9c24 Mon Sep 17 00:00:00 2001 From: Sumit Garg Date: Thu, 4 Jun 2020 15:31:19 +0530 Subject: [PATCH 558/618] kdb: Switch to use safer dbg_io_ops over console APIs In kgdb context, calling console handlers aren't safe due to locks used in those handlers which could in turn lead to a deadlock. Although, using oops_in_progress increases the chance to bypass locks in most console handlers but it might not be sufficient enough in case a console uses more locks (VT/TTY is good example). Currently when a driver provides both polling I/O and a console then kdb will output using the console. We can increase robustness by using the currently active polling I/O driver (which should be lockless) instead of the corresponding console. For several common cases (e.g. an embedded system with a single serial port that is used both for console output and debugger I/O) this will result in no console handler being used. In order to achieve this we need to reverse the order of preference to use dbg_io_ops (uses polling I/O mode) over console APIs. So we just store "struct console" that represents debugger I/O in dbg_io_ops and while emitting kdb messages, skip console that matches dbg_io_ops console in order to avoid duplicate messages. After this change, "is_console" param becomes redundant and hence removed. Suggested-by: Daniel Thompson Signed-off-by: Sumit Garg Link: https://lore.kernel.org/r/1591264879-25920-5-git-send-email-sumit.garg@linaro.org Reviewed-by: Douglas Anderson Reviewed-by: Petr Mladek Acked-by: Greg Kroah-Hartman Signed-off-by: Daniel Thompson --- drivers/tty/serial/kgdb_nmi.c | 2 +- drivers/tty/serial/kgdboc.c | 32 ++++++++++++++++---------------- drivers/usb/early/ehci-dbgp.c | 3 ++- include/linux/kgdb.h | 5 ++--- kernel/debug/kdb/kdb_io.c | 4 +++- 5 files changed, 24 insertions(+), 22 deletions(-) diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c index 5022447afa23..6004c0c1d173 100644 --- a/drivers/tty/serial/kgdb_nmi.c +++ b/drivers/tty/serial/kgdb_nmi.c @@ -50,7 +50,7 @@ static int kgdb_nmi_console_setup(struct console *co, char *options) * I/O utilities that messages sent to the console will automatically * be displayed on the dbg_io. */ - dbg_io_ops->is_console = true; + dbg_io_ops->cons = co; return 0; } diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c index 41396982e9e0..84ffede27f23 100644 --- a/drivers/tty/serial/kgdboc.c +++ b/drivers/tty/serial/kgdboc.c @@ -45,7 +45,6 @@ static struct platform_device *kgdboc_pdev; #if IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE) static struct kgdb_io kgdboc_earlycon_io_ops; -static struct console *earlycon; static int (*earlycon_orig_exit)(struct console *con); #endif /* IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE) */ @@ -145,7 +144,7 @@ static void kgdboc_unregister_kbd(void) #if IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE) static void cleanup_earlycon(void) { - if (earlycon) + if (kgdboc_earlycon_io_ops.cons) kgdb_unregister_io_module(&kgdboc_earlycon_io_ops); } #else /* !IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE) */ @@ -178,7 +177,7 @@ static int configure_kgdboc(void) goto noconfig; } - kgdboc_io_ops.is_console = 0; + kgdboc_io_ops.cons = NULL; kgdb_tty_driver = NULL; kgdboc_use_kms = 0; @@ -198,7 +197,7 @@ static int configure_kgdboc(void) int idx; if (cons->device && cons->device(cons, &idx) == p && idx == tty_line) { - kgdboc_io_ops.is_console = 1; + kgdboc_io_ops.cons = cons; break; } } @@ -433,7 +432,8 @@ static int kgdboc_earlycon_get_char(void) { char c; - if (!earlycon->read(earlycon, &c, 1)) + if (!kgdboc_earlycon_io_ops.cons->read(kgdboc_earlycon_io_ops.cons, + &c, 1)) return NO_POLL_CHAR; return c; @@ -441,7 +441,8 @@ static int kgdboc_earlycon_get_char(void) static void kgdboc_earlycon_put_char(u8 chr) { - earlycon->write(earlycon, &chr, 1); + kgdboc_earlycon_io_ops.cons->write(kgdboc_earlycon_io_ops.cons, &chr, + 1); } static void kgdboc_earlycon_pre_exp_handler(void) @@ -461,7 +462,7 @@ static void kgdboc_earlycon_pre_exp_handler(void) * boot if we detect this case. */ for_each_console(con) - if (con == earlycon) + if (con == kgdboc_earlycon_io_ops.cons) return; already_warned = true; @@ -484,25 +485,25 @@ static int kgdboc_earlycon_deferred_exit(struct console *con) static void kgdboc_earlycon_deinit(void) { - if (!earlycon) + if (!kgdboc_earlycon_io_ops.cons) return; - if (earlycon->exit == kgdboc_earlycon_deferred_exit) + if (kgdboc_earlycon_io_ops.cons->exit == kgdboc_earlycon_deferred_exit) /* * kgdboc_earlycon is exiting but original boot console exit * was never called (AKA kgdboc_earlycon_deferred_exit() * didn't ever run). Undo our trap. */ - earlycon->exit = earlycon_orig_exit; - else if (earlycon->exit) + kgdboc_earlycon_io_ops.cons->exit = earlycon_orig_exit; + else if (kgdboc_earlycon_io_ops.cons->exit) /* * We skipped calling the exit() routine so we could try to * keep using the boot console even after it went away. We're * finally done so call the function now. */ - earlycon->exit(earlycon); + kgdboc_earlycon_io_ops.cons->exit(kgdboc_earlycon_io_ops.cons); - earlycon = NULL; + kgdboc_earlycon_io_ops.cons = NULL; } static struct kgdb_io kgdboc_earlycon_io_ops = { @@ -511,7 +512,6 @@ static struct kgdb_io kgdboc_earlycon_io_ops = { .write_char = kgdboc_earlycon_put_char, .pre_exception = kgdboc_earlycon_pre_exp_handler, .deinit = kgdboc_earlycon_deinit, - .is_console = true, }; #define MAX_CONSOLE_NAME_LEN (sizeof((struct console *) 0)->name) @@ -557,10 +557,10 @@ static int __init kgdboc_earlycon_init(char *opt) goto unlock; } - earlycon = con; + kgdboc_earlycon_io_ops.cons = con; pr_info("Going to register kgdb with earlycon '%s'\n", con->name); if (kgdb_register_io_module(&kgdboc_earlycon_io_ops) != 0) { - earlycon = NULL; + kgdboc_earlycon_io_ops.cons = NULL; pr_info("Failed to register kgdb with earlycon\n"); } else { /* Trap exit so we can keep earlycon longer if needed. */ diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index ea0d531c63e2..775cf70cfb3e 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -1058,7 +1058,8 @@ static int __init kgdbdbgp_parse_config(char *str) kgdbdbgp_wait_time = simple_strtoul(ptr, &ptr, 10); } kgdb_register_io_module(&kgdbdbgp_io_ops); - kgdbdbgp_io_ops.is_console = early_dbgp_console.index != -1; + if (early_dbgp_console.index != -1) + kgdbdbgp_io_ops.cons = &early_dbgp_console; return 0; } diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h index c62d76478adc..529116b0cabe 100644 --- a/include/linux/kgdb.h +++ b/include/linux/kgdb.h @@ -276,8 +276,7 @@ struct kgdb_arch { * the I/O driver. * @post_exception: Pointer to a function that will do any cleanup work * for the I/O driver. - * @is_console: 1 if the end device is a console 0 if the I/O device is - * not a console + * @cons: valid if the I/O device is a console; else NULL. */ struct kgdb_io { const char *name; @@ -288,7 +287,7 @@ struct kgdb_io { void (*deinit) (void); void (*pre_exception) (void); void (*post_exception) (void); - int is_console; + struct console *cons; }; extern const struct kgdb_arch arch_kgdb_ops; diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c index 0e4f2eda96d8..683a799618ad 100644 --- a/kernel/debug/kdb/kdb_io.c +++ b/kernel/debug/kdb/kdb_io.c @@ -549,7 +549,7 @@ static void kdb_msg_write(const char *msg, int msg_len) if (msg_len == 0) return; - if (dbg_io_ops && !dbg_io_ops->is_console) { + if (dbg_io_ops) { const char *cp = msg; int len = msg_len; @@ -562,6 +562,8 @@ static void kdb_msg_write(const char *msg, int msg_len) for_each_console(c) { if (!(c->flags & CON_ENABLED)) continue; + if (c == dbg_io_ops->cons) + continue; /* * Set oops_in_progress to encourage the console drivers to * disregard their internal spin locks: in the current calling From 440ab9e10e2e6e5fd677473ee6f9e3af0f6904d6 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Tue, 2 Jun 2020 15:47:39 -0700 Subject: [PATCH 559/618] kgdb: Avoid suspicious RCU usage warning At times when I'm using kgdb I see a splat on my console about suspicious RCU usage. I managed to come up with a case that could reproduce this that looked like this: WARNING: suspicious RCU usage 5.7.0-rc4+ #609 Not tainted ----------------------------- kernel/pid.c:395 find_task_by_pid_ns() needs rcu_read_lock() protection! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by swapper/0/1: #0: ffffff81b6b8e988 (&dev->mutex){....}-{3:3}, at: __device_attach+0x40/0x13c #1: ffffffd01109e9e8 (dbg_master_lock){....}-{2:2}, at: kgdb_cpu_enter+0x20c/0x7ac #2: ffffffd01109ea90 (dbg_slave_lock){....}-{2:2}, at: kgdb_cpu_enter+0x3ec/0x7ac stack backtrace: CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc4+ #609 Hardware name: Google Cheza (rev3+) (DT) Call trace: dump_backtrace+0x0/0x1b8 show_stack+0x1c/0x24 dump_stack+0xd4/0x134 lockdep_rcu_suspicious+0xf0/0x100 find_task_by_pid_ns+0x5c/0x80 getthread+0x8c/0xb0 gdb_serial_stub+0x9d4/0xd04 kgdb_cpu_enter+0x284/0x7ac kgdb_handle_exception+0x174/0x20c kgdb_brk_fn+0x24/0x30 call_break_hook+0x6c/0x7c brk_handler+0x20/0x5c do_debug_exception+0x1c8/0x22c el1_sync_handler+0x3c/0xe4 el1_sync+0x7c/0x100 rpmh_rsc_probe+0x38/0x420 platform_drv_probe+0x94/0xb4 really_probe+0x134/0x300 driver_probe_device+0x68/0x100 __device_attach_driver+0x90/0xa8 bus_for_each_drv+0x84/0xcc __device_attach+0xb4/0x13c device_initial_probe+0x18/0x20 bus_probe_device+0x38/0x98 device_add+0x38c/0x420 If I understand properly we should just be able to blanket kgdb under one big RCU read lock and the problem should go away. We'll add it to the beast-of-a-function known as kgdb_cpu_enter(). With this I no longer get any splats and things seem to work fine. Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20200602154729.v2.1.I70e0d4fd46d5ed2aaf0c98a355e8e1b7a5bb7e4e@changeid Signed-off-by: Daniel Thompson --- kernel/debug/debug_core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c index bc8d25f2ac8a..9e5934780f41 100644 --- a/kernel/debug/debug_core.c +++ b/kernel/debug/debug_core.c @@ -587,6 +587,7 @@ static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs, arch_kgdb_ops.disable_hw_break(regs); acquirelock: + rcu_read_lock(); /* * Interrupts will be restored by the 'trap return' code, except when * single stepping. @@ -646,6 +647,7 @@ static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs, atomic_dec(&slaves_in_kgdb); dbg_touch_watchdogs(); local_irq_restore(flags); + rcu_read_unlock(); return 0; } cpu_relax(); @@ -664,6 +666,7 @@ static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs, raw_spin_unlock(&dbg_master_lock); dbg_touch_watchdogs(); local_irq_restore(flags); + rcu_read_unlock(); goto acquirelock; } @@ -787,6 +790,7 @@ static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs, raw_spin_unlock(&dbg_master_lock); dbg_touch_watchdogs(); local_irq_restore(flags); + rcu_read_unlock(); return kgdb_info[cpu].ret_state; } From 3f37d14b8a3152441f36b6bc74000996679f0998 Mon Sep 17 00:00:00 2001 From: Rikard Falkeborn Date: Sun, 7 Jun 2020 23:57:15 +0200 Subject: [PATCH 560/618] kunit: kunit_config: Fix parsing of CONFIG options with space Commit 8b59cd81dc5e ("kbuild: ensure full rebuild when the compiler is updated") introduced a new CONFIG option CONFIG_CC_VERSION_TEXT. On my system, this is set to "gcc (GCC) 10.1.0" which breaks KUnit config parsing which did not like the spaces in the string. Fix this by updating the regex to allow strings containing spaces. Fixes: 8b59cd81dc5e ("kbuild: ensure full rebuild when the compiler is updated") Signed-off-by: Rikard Falkeborn Reviewed-by: Brendan Higgins Signed-off-by: Shuah Khan --- tools/testing/kunit/kunit_config.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/kunit/kunit_config.py b/tools/testing/kunit/kunit_config.py index e75063d603b5..02ffc3a3e5dc 100644 --- a/tools/testing/kunit/kunit_config.py +++ b/tools/testing/kunit/kunit_config.py @@ -10,7 +10,7 @@ import collections import re CONFIG_IS_NOT_SET_PATTERN = r'^# CONFIG_(\w+) is not set$' -CONFIG_PATTERN = r'^CONFIG_(\w+)=(\S+)$' +CONFIG_PATTERN = r'^CONFIG_(\w+)=(\S+|".*")$' KconfigEntryBase = collections.namedtuple('KconfigEntry', ['name', 'value']) From e173b8b8c419897eabe0e337a0125c6d87ef1644 Mon Sep 17 00:00:00 2001 From: Uriel Guajardo Date: Thu, 11 Jun 2020 21:05:45 +0000 Subject: [PATCH 561/618] kunit: show error if kunit results are not present Currently, if the kernel is configured incorrectly or if it crashes before any kunit tests are run, kunit finishes without error, reporting that 0 test cases were run. To fix this, an error is shown when the tap header is not found, which indicates that kunit was not able to run at all. Signed-off-by: Uriel Guajardo Reviewed-by: Brendan Higgins Signed-off-by: Shuah Khan --- tools/testing/kunit/kunit_parser.py | 8 ++++---- tools/testing/kunit/kunit_tool_test.py | 11 +++++++++++ .../kunit/test_data/test_insufficient_memory.log | 0 3 files changed, 15 insertions(+), 4 deletions(-) create mode 100644 tools/testing/kunit/test_data/test_insufficient_memory.log diff --git a/tools/testing/kunit/kunit_parser.py b/tools/testing/kunit/kunit_parser.py index 64aac9dcd431..f13e0c0d6663 100644 --- a/tools/testing/kunit/kunit_parser.py +++ b/tools/testing/kunit/kunit_parser.py @@ -265,11 +265,9 @@ def bubble_up_suite_errors(test_suite_list: List[TestSuite]) -> TestStatus: return bubble_up_errors(lambda x: x.status, test_suite_list) def parse_test_result(lines: List[str]) -> TestResult: - if not lines: - return TestResult(TestStatus.NO_TESTS, [], lines) consume_non_diagnositic(lines) - if not parse_tap_header(lines): - return None + if not lines or not parse_tap_header(lines): + return TestResult(TestStatus.NO_TESTS, [], lines) test_suites = [] test_suite = parse_test_suite(lines) while test_suite: @@ -282,6 +280,8 @@ def parse_run_tests(kernel_output) -> TestResult: failed_tests = 0 crashed_tests = 0 test_result = parse_test_result(list(isolate_kunit_output(kernel_output))) + if test_result.status == TestStatus.NO_TESTS: + print_with_timestamp(red('[ERROR] ') + 'no kunit output detected') for test_suite in test_result.suites: if test_suite.status == TestStatus.SUCCESS: print_suite_divider(green('[PASSED] ') + test_suite.name) diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index 5bb7b118ebd9..f9eeaea94cad 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -170,6 +170,17 @@ class KUnitParserTest(unittest.TestCase): result.status) file.close() + def test_no_kunit_output(self): + crash_log = get_absolute_path( + 'test_data/test_insufficient_memory.log') + file = open(crash_log) + print_mock = mock.patch('builtins.print').start() + result = kunit_parser.parse_run_tests( + kunit_parser.isolate_kunit_output(file.readlines())) + print_mock.assert_any_call(StrContains("no kunit output detected")) + print_mock.stop() + file.close() + def test_crashed_test(self): crashed_log = get_absolute_path( 'test_data/test_is_test_passed-crash.log') diff --git a/tools/testing/kunit/test_data/test_insufficient_memory.log b/tools/testing/kunit/test_data/test_insufficient_memory.log new file mode 100644 index 000000000000..e69de29bb2d1 From ee61492ab92b108b7db66acfd2c5f794244466b9 Mon Sep 17 00:00:00 2001 From: David Gow Date: Mon, 15 Jun 2020 23:47:30 -0700 Subject: [PATCH 562/618] kunit: kunit_tool: Fix invalid result when build fails When separating out different phases of running tests[1] (build/exec/parse/etc), the format of the KunitResult tuple changed (adding an elapsed_time variable). This is not populated during a build failure, causing kunit.py to crash. This fixes [1] to probably populate the result variable, causing a failing build to be reported properly. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=45ba7a893ad89114e773b3dc32f6431354c465d6 Signed-off-by: David Gow Reviewed-by: Brendan Higgins Tested-by: Brendan Higgins Signed-off-by: Shuah Khan --- tools/testing/kunit/kunit.py | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/testing/kunit/kunit.py b/tools/testing/kunit/kunit.py index 787b6d4ad716..f9b769f3437d 100755 --- a/tools/testing/kunit/kunit.py +++ b/tools/testing/kunit/kunit.py @@ -82,7 +82,9 @@ def build_tests(linux: kunit_kernel.LinuxSourceTree, request.make_options) build_end = time.time() if not success: - return KunitResult(KunitStatus.BUILD_FAILURE, 'could not build kernel') + return KunitResult(KunitStatus.BUILD_FAILURE, + 'could not build kernel', + build_end - build_start) if not success: return KunitResult(KunitStatus.BUILD_FAILURE, 'could not build kernel', From c63d2dd7e134ebddce4745c51f9572b3f0d92b26 Mon Sep 17 00:00:00 2001 From: David Gow Date: Tue, 2 Jun 2020 20:37:25 -0700 Subject: [PATCH 563/618] Documentation: kunit: Add some troubleshooting tips to the FAQ Add an FAQ entry to the KUnit documentation with some tips for troubleshooting KUnit and kunit_tool. These suggestions largely came from an email thread: https://lore.kernel.org/linux-kselftest/41db8bbd-3ba0-8bde-7352-083bf4b947ff@intel.com/T/#m23213d4e156db6d59b0b460a9014950f5ff6eb03 Signed-off-by: David Gow Reviewed-by: Alan Maguire Reviewed-by: Brendan Higgins Signed-off-by: Shuah Khan --- Documentation/dev-tools/kunit/faq.rst | 40 +++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/Documentation/dev-tools/kunit/faq.rst b/Documentation/dev-tools/kunit/faq.rst index ea55b2467653..1628862e7024 100644 --- a/Documentation/dev-tools/kunit/faq.rst +++ b/Documentation/dev-tools/kunit/faq.rst @@ -61,3 +61,43 @@ test, or an end-to-end test. kernel by installing a production configuration of the kernel on production hardware with a production userspace and then trying to exercise some behavior that depends on interactions between the hardware, the kernel, and userspace. + +KUnit isn't working, what should I do? +====================================== + +Unfortunately, there are a number of things which can break, but here are some +things to try. + +1. Try running ``./tools/testing/kunit/kunit.py run`` with the ``--raw_output`` + parameter. This might show details or error messages hidden by the kunit_tool + parser. +2. Instead of running ``kunit.py run``, try running ``kunit.py config``, + ``kunit.py build``, and ``kunit.py exec`` independently. This can help track + down where an issue is occurring. (If you think the parser is at fault, you + can run it manually against stdin or a file with ``kunit.py parse``.) +3. Running the UML kernel directly can often reveal issues or error messages + kunit_tool ignores. This should be as simple as running ``./vmlinux`` after + building the UML kernel (e.g., by using ``kunit.py build``). Note that UML + has some unusual requirements (such as the host having a tmpfs filesystem + mounted), and has had issues in the past when built statically and the host + has KASLR enabled. (On older host kernels, you may need to run ``setarch + `uname -m` -R ./vmlinux`` to disable KASLR.) +4. Make sure the kernel .config has ``CONFIG_KUNIT=y`` and at least one test + (e.g. ``CONFIG_KUNIT_EXAMPLE_TEST=y``). kunit_tool will keep its .config + around, so you can see what config was used after running ``kunit.py run``. + It also preserves any config changes you might make, so you can + enable/disable things with ``make ARCH=um menuconfig`` or similar, and then + re-run kunit_tool. +5. Try to run ``make ARCH=um defconfig`` before running ``kunit.py run``. This + may help clean up any residual config items which could be causing problems. +6. Finally, try running KUnit outside UML. KUnit and KUnit tests can run be + built into any kernel, or can be built as a module and loaded at runtime. + Doing so should allow you to determine if UML is causing the issue you're + seeing. When tests are built-in, they will execute when the kernel boots, and + modules will automatically execute associated tests when loaded. Test results + can be collected from ``/sys/kernel/debug/kunit//results``, and + can be parsed with ``kunit.py parse``. For more details, see "KUnit on + non-UML architectures" in :doc:`usage`. + +If none of the above tricks help, you are always welcome to email any issues to +kunit-dev@googlegroups.com. From 719fdd32921fb7e3208db8832d32ae1c2d68900f Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 24 Jun 2020 17:00:24 +0100 Subject: [PATCH 564/618] afs: Fix storage of cell names The cell name stored in the afs_cell struct is a 64-char + NUL buffer - when it needs to be able to handle up to AFS_MAXCELLNAME (256 chars) + NUL. Fix this by changing the array to a pointer and allocating the string. Found using Coverity. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: Colin Ian King Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- fs/afs/cell.c | 9 +++++++++ fs/afs/internal.h | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/fs/afs/cell.c b/fs/afs/cell.c index 005921e3b38d..5b79cdceefa0 100644 --- a/fs/afs/cell.c +++ b/fs/afs/cell.c @@ -154,10 +154,17 @@ static struct afs_cell *afs_alloc_cell(struct afs_net *net, return ERR_PTR(-ENOMEM); } + cell->name = kmalloc(namelen + 1, GFP_KERNEL); + if (!cell->name) { + kfree(cell); + return ERR_PTR(-ENOMEM); + } + cell->net = net; cell->name_len = namelen; for (i = 0; i < namelen; i++) cell->name[i] = tolower(name[i]); + cell->name[i] = 0; atomic_set(&cell->usage, 2); INIT_WORK(&cell->manager, afs_manage_cell); @@ -207,6 +214,7 @@ static struct afs_cell *afs_alloc_cell(struct afs_net *net, if (ret == -EINVAL) printk(KERN_ERR "kAFS: bad VL server IP address\n"); error: + kfree(cell->name); kfree(cell); _leave(" = %d", ret); return ERR_PTR(ret); @@ -489,6 +497,7 @@ static void afs_cell_destroy(struct rcu_head *rcu) afs_put_vlserverlist(cell->net, rcu_access_pointer(cell->vl_servers)); afs_put_cell(cell->net, cell->alias_of); key_put(cell->anonymous_key); + kfree(cell->name); kfree(cell); _leave(" [destroyed]"); diff --git a/fs/afs/internal.h b/fs/afs/internal.h index d520535ddb62..792ac711985e 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -388,7 +388,7 @@ struct afs_cell { struct afs_vlserver_list __rcu *vl_servers; u8 name_len; /* Length of name */ - char name[64 + 1]; /* Cell name, case-flattened and NUL-padded */ + char *name; /* Cell name, case-flattened and NUL-padded */ }; /* From 0f77ce26ebcf6ea384421d2dd47b924b83649692 Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Thu, 18 Jun 2020 19:24:56 +0200 Subject: [PATCH 565/618] Revert "ARM: sti: Implement dummy L2 cache's write_sec" This reverts commit 7b8e0188fa717cd9abc4fb52587445b421835c2a. Initially, STiH410-B2260 was supposed to be secured, that's why l2c_write_sec was stubbed to avoid secure register access from non secure world. But by default, STiH410-B2260 is running in non secure mode, so L2 cache register accesses are authorized, l2c_write_sec stub is not needed. With this patch, L2 cache is configured and performance are enhanced. Link: https://lore.kernel.org/r/20200618172456.29475-1-patrice.chotard@st.com Signed-off-by: Patrice Chotard Cc: Alain Volmat Signed-off-by: Arnd Bergmann --- arch/arm/mach-sti/board-dt.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c index dcb98937fcf5..ffecbf29646f 100644 --- a/arch/arm/mach-sti/board-dt.c +++ b/arch/arm/mach-sti/board-dt.c @@ -20,14 +20,6 @@ static const char *const stih41x_dt_match[] __initconst = { NULL }; -static void sti_l2_write_sec(unsigned long val, unsigned reg) -{ - /* - * We can't write to secure registers as we are in non-secure - * mode, until we have some SMI service available. - */ -} - DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree") .dt_compat = stih41x_dt_match, .l2c_aux_val = L2C_AUX_CTRL_SHARED_OVERRIDE | @@ -36,5 +28,4 @@ DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree") L2C_AUX_CTRL_WAY_SIZE(4), .l2c_aux_mask = 0xc0000fff, .smp = smp_ops(sti_smp_ops), - .l2c_write_sec = sti_l2_write_sec, MACHINE_END From 4f311afc2035f7b33d97e69ffaa2e6cd67fca16d Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 10 Jun 2020 12:14:09 +0200 Subject: [PATCH 566/618] sched/core: Fix CONFIG_GCC_PLUGIN_RANDSTRUCT build fail As a temporary build fix, the proper cleanup needs more work. Reported-by: Guenter Roeck Reported-by: Eric Biggers Suggested-by: Eric Biggers Suggested-by: Kees Cook Fixes: a148866489fb ("sched: Replace rq::wake_list") Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar --- include/linux/sched.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index b62e6aaf28f0..224b5de568e7 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -654,8 +654,10 @@ struct task_struct { unsigned int ptrace; #ifdef CONFIG_SMP - struct llist_node wake_entry; - unsigned int wake_entry_type; + struct { + struct llist_node wake_entry; + unsigned int wake_entry_type; + }; int on_cpu; #ifdef CONFIG_THREAD_INFO_IN_TASK /* Current CPU: */ From fd844ba9ae59b51e34e77105d79f8eca780b3bd6 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Wed, 17 Jun 2020 14:17:42 +0200 Subject: [PATCH 567/618] sched/core: Check cpus_mask, not cpus_ptr in __set_cpus_allowed_ptr(), to fix mask corruption This function is concerned with the long-term CPU mask, not the transitory mask the task might have while migrate disabled. Before this patch, if a task was migrate-disabled at the time __set_cpus_allowed_ptr() was called, and the new mask happened to be equal to the CPU that the task was running on, then the mask update would be lost. Signed-off-by: Scott Wood Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Link: https://lkml.kernel.org/r/20200617121742.cpxppyi7twxmpin7@linutronix.de --- kernel/sched/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 8f360326861e..9eeac94224db 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -1637,7 +1637,7 @@ static int __set_cpus_allowed_ptr(struct task_struct *p, goto out; } - if (cpumask_equal(p->cpus_ptr, new_mask)) + if (cpumask_equal(&p->cpus_mask, new_mask)) goto out; /* From ce9bc3b27f2a21a7969b41ffb04df8cf61bd1592 Mon Sep 17 00:00:00 2001 From: Juri Lelli Date: Wed, 17 Jun 2020 09:29:19 +0200 Subject: [PATCH 568/618] sched/deadline: Initialize ->dl_boosted syzbot reported the following warning triggered via SYSC_sched_setattr(): WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 setup_new_dl_entity /kernel/sched/deadline.c:594 [inline] WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 enqueue_dl_entity /kernel/sched/deadline.c:1370 [inline] WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 enqueue_task_dl+0x1c17/0x2ba0 /kernel/sched/deadline.c:1441 This happens because the ->dl_boosted flag is currently not initialized by __dl_clear_params() (unlike the other flags) and setup_new_dl_entity() rightfully complains about it. Initialize dl_boosted to 0. Fixes: 2d3d891d3344 ("sched/deadline: Add SCHED_DEADLINE inheritance logic") Reported-by: syzbot+5ac8bac25f95e8b221e7@syzkaller.appspotmail.com Signed-off-by: Juri Lelli Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Tested-by: Daniel Wagner Link: https://lkml.kernel.org/r/20200617072919.818409-1-juri.lelli@redhat.com --- kernel/sched/deadline.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c index 504d2f51b0d6..f63f337c7147 100644 --- a/kernel/sched/deadline.c +++ b/kernel/sched/deadline.c @@ -2692,6 +2692,7 @@ void __dl_clear_params(struct task_struct *p) dl_se->dl_bw = 0; dl_se->dl_density = 0; + dl_se->dl_boosted = 0; dl_se->dl_throttled = 0; dl_se->dl_yielded = 0; dl_se->dl_non_contending = 0; From 740797ce3a124b7dd22b7fb832d87bc8fba1cf6f Mon Sep 17 00:00:00 2001 From: Juri Lelli Date: Mon, 19 Nov 2018 16:32:01 +0100 Subject: [PATCH 569/618] sched/core: Fix PI boosting between RT and DEADLINE tasks syzbot reported the following warning: WARNING: CPU: 1 PID: 6351 at kernel/sched/deadline.c:628 enqueue_task_dl+0x22da/0x38a0 kernel/sched/deadline.c:1504 At deadline.c:628 we have: 623 static inline void setup_new_dl_entity(struct sched_dl_entity *dl_se) 624 { 625 struct dl_rq *dl_rq = dl_rq_of_se(dl_se); 626 struct rq *rq = rq_of_dl_rq(dl_rq); 627 628 WARN_ON(dl_se->dl_boosted); 629 WARN_ON(dl_time_before(rq_clock(rq), dl_se->deadline)); [...] } Which means that setup_new_dl_entity() has been called on a task currently boosted. This shouldn't happen though, as setup_new_dl_entity() is only called when the 'dynamic' deadline of the new entity is in the past w.r.t. rq_clock and boosted tasks shouldn't verify this condition. Digging through the PI code I noticed that what above might in fact happen if an RT tasks blocks on an rt_mutex hold by a DEADLINE task. In the first branch of boosting conditions we check only if a pi_task 'dynamic' deadline is earlier than mutex holder's and in this case we set mutex holder to be dl_boosted. However, since RT 'dynamic' deadlines are only initialized if such tasks get boosted at some point (or if they become DEADLINE of course), in general RT 'dynamic' deadlines are usually equal to 0 and this verifies the aforementioned condition. Fix it by checking that the potential donor task is actually (even if temporary because in turn boosted) running at DEADLINE priority before using its 'dynamic' deadline value. Fixes: 2d3d891d3344 ("sched/deadline: Add SCHED_DEADLINE inheritance logic") Reported-by: syzbot+119ba87189432ead09b4@syzkaller.appspotmail.com Signed-off-by: Juri Lelli Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Reviewed-by: Daniel Bristot de Oliveira Tested-by: Daniel Wagner Link: https://lkml.kernel.org/r/20181119153201.GB2119@localhost.localdomain --- kernel/sched/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 9eeac94224db..c1ba2e569fc9 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -4533,7 +4533,8 @@ void rt_mutex_setprio(struct task_struct *p, struct task_struct *pi_task) */ if (dl_prio(prio)) { if (!dl_prio(p->normal_prio) || - (pi_task && dl_entity_preempt(&pi_task->dl, &p->dl))) { + (pi_task && dl_prio(pi_task->prio) && + dl_entity_preempt(&pi_task->dl, &p->dl))) { p->dl.dl_boosted = 1; queue_flag |= ENQUEUE_REPLENISH; } else From b6e13e85829f032411b896bd2f0d6cbe4b0a3c4a Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 22 Jun 2020 12:01:23 +0200 Subject: [PATCH 570/618] sched/core: Fix ttwu() race Paul reported rcutorture occasionally hitting a NULL deref: sched_ttwu_pending() ttwu_do_wakeup() check_preempt_curr() := check_preempt_wakeup() find_matching_se() is_same_group() if (se->cfs_rq == pse->cfs_rq) <-- *BOOM* Debugging showed that this only appears to happen when we take the new code-path from commit: 2ebb17717550 ("sched/core: Offload wakee task activation if it the wakee is descheduling") and only when @cpu == smp_processor_id(). Something which should not be possible, because p->on_cpu can only be true for remote tasks. Similarly, without the new code-path from commit: c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") this would've unconditionally hit: smp_cond_load_acquire(&p->on_cpu, !VAL); and if: 'cpu == smp_processor_id() && p->on_cpu' is possible, this would result in an instant live-lock (with IRQs disabled), something that hasn't been reported. The NULL deref can be explained however if the task_cpu(p) load at the beginning of try_to_wake_up() returns an old value, and this old value happens to be smp_processor_id(). Further assume that the p->on_cpu load accurately returns 1, it really is still running, just not here. Then, when we enqueue the task locally, we can crash in exactly the observed manner because p->se.cfs_rq != rq->cfs_rq, because p's cfs_rq is from the wrong CPU, therefore we'll iterate into the non-existant parents and NULL deref. The closest semi-plausible scenario I've managed to contrive is somewhat elaborate (then again, actual reproduction takes many CPU hours of rcutorture, so it can't be anything obvious): X->cpu = 1 rq(1)->curr = X CPU0 CPU1 CPU2 // switch away from X LOCK rq(1)->lock smp_mb__after_spinlock dequeue_task(X) X->on_rq = 9 switch_to(Z) X->on_cpu = 0 UNLOCK rq(1)->lock // migrate X to cpu 0 LOCK rq(1)->lock dequeue_task(X) set_task_cpu(X, 0) X->cpu = 0 UNLOCK rq(1)->lock LOCK rq(0)->lock enqueue_task(X) X->on_rq = 1 UNLOCK rq(0)->lock // switch to X LOCK rq(0)->lock smp_mb__after_spinlock switch_to(X) X->on_cpu = 1 UNLOCK rq(0)->lock // X goes sleep X->state = TASK_UNINTERRUPTIBLE smp_mb(); // wake X ttwu() LOCK X->pi_lock smp_mb__after_spinlock if (p->state) cpu = X->cpu; // =? 1 smp_rmb() // X calls schedule() LOCK rq(0)->lock smp_mb__after_spinlock dequeue_task(X) X->on_rq = 0 if (p->on_rq) smp_rmb(); if (p->on_cpu && ttwu_queue_wakelist(..)) [*] smp_cond_load_acquire(&p->on_cpu, !VAL) cpu = select_task_rq(X, X->wake_cpu, ...) if (X->cpu != cpu) switch_to(Y) X->on_cpu = 0 UNLOCK rq(0)->lock However I'm having trouble convincing myself that's actually possible on x86_64 -- after all, every LOCK implies an smp_mb() there, so if ttwu observes ->state != RUNNING, it must also observe ->cpu != 1. (Most of the previous ttwu() races were found on very large PowerPC) Nevertheless, this fully explains the observed failure case. Fix it by ordering the task_cpu(p) load after the p->on_cpu load, which is easy since nothing actually uses @cpu before this. Fixes: c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") Reported-by: Paul E. McKenney Tested-by: Paul E. McKenney Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Link: https://lkml.kernel.org/r/20200622125649.GC576871@hirez.programming.kicks-ass.net --- kernel/sched/core.c | 33 ++++++++++++++++++++++++++++----- 1 file changed, 28 insertions(+), 5 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index c1ba2e569fc9..60791b991b21 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -2293,8 +2293,15 @@ void sched_ttwu_pending(void *arg) rq_lock_irqsave(rq, &rf); update_rq_clock(rq); - llist_for_each_entry_safe(p, t, llist, wake_entry) + llist_for_each_entry_safe(p, t, llist, wake_entry) { + if (WARN_ON_ONCE(p->on_cpu)) + smp_cond_load_acquire(&p->on_cpu, !VAL); + + if (WARN_ON_ONCE(task_cpu(p) != cpu_of(rq))) + set_task_cpu(p, cpu_of(rq)); + ttwu_do_activate(rq, p, p->sched_remote_wakeup ? WF_MIGRATED : 0, &rf); + } rq_unlock_irqrestore(rq, &rf); } @@ -2378,6 +2385,9 @@ static inline bool ttwu_queue_cond(int cpu, int wake_flags) static bool ttwu_queue_wakelist(struct task_struct *p, int cpu, int wake_flags) { if (sched_feat(TTWU_QUEUE) && ttwu_queue_cond(cpu, wake_flags)) { + if (WARN_ON_ONCE(cpu == smp_processor_id())) + return false; + sched_clock_cpu(cpu); /* Sync clocks across CPUs */ __ttwu_queue_wakelist(p, cpu, wake_flags); return true; @@ -2528,7 +2538,6 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags) goto out; success = 1; - cpu = task_cpu(p); trace_sched_waking(p); p->state = TASK_RUNNING; trace_sched_wakeup(p); @@ -2550,7 +2559,6 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags) /* We're going to change ->state: */ success = 1; - cpu = task_cpu(p); /* * Ensure we load p->on_rq _after_ p->state, otherwise it would @@ -2614,8 +2622,21 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags) * which potentially sends an IPI instead of spinning on p->on_cpu to * let the waker make forward progress. This is safe because IRQs are * disabled and the IPI will deliver after on_cpu is cleared. + * + * Ensure we load task_cpu(p) after p->on_cpu: + * + * set_task_cpu(p, cpu); + * STORE p->cpu = @cpu + * __schedule() (switch to task 'p') + * LOCK rq->lock + * smp_mb__after_spin_lock() smp_cond_load_acquire(&p->on_cpu) + * STORE p->on_cpu = 1 LOAD p->cpu + * + * to ensure we observe the correct CPU on which the task is currently + * scheduling. */ - if (READ_ONCE(p->on_cpu) && ttwu_queue_wakelist(p, cpu, wake_flags | WF_ON_RQ)) + if (smp_load_acquire(&p->on_cpu) && + ttwu_queue_wakelist(p, task_cpu(p), wake_flags | WF_ON_RQ)) goto unlock; /* @@ -2635,6 +2656,8 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags) psi_ttwu_dequeue(p); set_task_cpu(p, cpu); } +#else + cpu = task_cpu(p); #endif /* CONFIG_SMP */ ttwu_queue(p, cpu, wake_flags); @@ -2642,7 +2665,7 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags) raw_spin_unlock_irqrestore(&p->pi_lock, flags); out: if (success) - ttwu_stat(p, cpu, wake_flags); + ttwu_stat(p, task_cpu(p), wake_flags); preempt_enable(); return success; From 739f70b476cf05c5a424b42a8b5728914345610c Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 22 Jun 2020 12:01:24 +0200 Subject: [PATCH 571/618] sched/core: s/WF_ON_RQ/WQ_ON_CPU/ Use a better name for this poorly named flag, to avoid confusion... Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Acked-by: Mel Gorman Link: https://lkml.kernel.org/r/20200622100825.785115830@infradead.org --- kernel/sched/core.c | 4 ++-- kernel/sched/sched.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 60791b991b21..f778067de277 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -2376,7 +2376,7 @@ static inline bool ttwu_queue_cond(int cpu, int wake_flags) * the soon-to-be-idle CPU as the current CPU is likely busy. * nr_running is checked to avoid unnecessary task stacking. */ - if ((wake_flags & WF_ON_RQ) && cpu_rq(cpu)->nr_running <= 1) + if ((wake_flags & WF_ON_CPU) && cpu_rq(cpu)->nr_running <= 1) return true; return false; @@ -2636,7 +2636,7 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags) * scheduling. */ if (smp_load_acquire(&p->on_cpu) && - ttwu_queue_wakelist(p, task_cpu(p), wake_flags | WF_ON_RQ)) + ttwu_queue_wakelist(p, task_cpu(p), wake_flags | WF_ON_CPU)) goto unlock; /* diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h index 1d4e94c1e5fe..877fb08eb1b0 100644 --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -1682,7 +1682,7 @@ static inline int task_on_rq_migrating(struct task_struct *p) #define WF_SYNC 0x01 /* Waker goes to sleep after wakeup */ #define WF_FORK 0x02 /* Child wakeup after fork */ #define WF_MIGRATED 0x04 /* Internal use, task got migrated */ -#define WF_ON_RQ 0x08 /* Wakee is on_rq */ +#define WF_ON_CPU 0x08 /* Wakee is on_cpu */ /* * To aid in avoiding the subversion of "niceness" due to uneven distribution From 8c4890d1c3358fb8023d46e1e554c41d54f02878 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 22 Jun 2020 12:01:25 +0200 Subject: [PATCH 572/618] smp, irq_work: Continue smp_call_function*() and irq_work*() integration Instead of relying on BUG_ON() to ensure the various data structures line up, use a bunch of horrible unions to make it all automatic. Much of the union magic is to ensure irq_work and smp_call_function do not (yet) see the members of their respective data structures change name. Suggested-by: Linus Torvalds Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Reviewed-by: Frederic Weisbecker Link: https://lkml.kernel.org/r/20200622100825.844455025@infradead.org --- include/linux/irq_work.h | 26 +++++---------- include/linux/sched.h | 5 +-- include/linux/smp.h | 23 +++++--------- include/linux/smp_types.h | 66 +++++++++++++++++++++++++++++++++++++++ kernel/sched/core.c | 6 ++-- kernel/smp.c | 18 ----------- 6 files changed, 86 insertions(+), 58 deletions(-) create mode 100644 include/linux/smp_types.h diff --git a/include/linux/irq_work.h b/include/linux/irq_work.h index 2735da5f839e..30823780c192 100644 --- a/include/linux/irq_work.h +++ b/include/linux/irq_work.h @@ -2,7 +2,7 @@ #ifndef _LINUX_IRQ_WORK_H #define _LINUX_IRQ_WORK_H -#include +#include /* * An entry can be in one of four states: @@ -13,24 +13,14 @@ * busy NULL, 2 -> {free, claimed} : callback in progress, can be claimed */ -/* flags share CSD_FLAG_ space */ - -#define IRQ_WORK_PENDING BIT(0) -#define IRQ_WORK_BUSY BIT(1) - -/* Doesn't want IPI, wait for tick: */ -#define IRQ_WORK_LAZY BIT(2) -/* Run hard IRQ context, even on RT */ -#define IRQ_WORK_HARD_IRQ BIT(3) - -#define IRQ_WORK_CLAIMED (IRQ_WORK_PENDING | IRQ_WORK_BUSY) - -/* - * structure shares layout with single_call_data_t. - */ struct irq_work { - struct llist_node llnode; - atomic_t flags; + union { + struct __call_single_node node; + struct { + struct llist_node llnode; + atomic_t flags; + }; + }; void (*func)(struct irq_work *); }; diff --git a/include/linux/sched.h b/include/linux/sched.h index 224b5de568e7..692e327d7455 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -654,11 +654,8 @@ struct task_struct { unsigned int ptrace; #ifdef CONFIG_SMP - struct { - struct llist_node wake_entry; - unsigned int wake_entry_type; - }; int on_cpu; + struct __call_single_node wake_entry; #ifdef CONFIG_THREAD_INFO_IN_TASK /* Current CPU: */ unsigned int cpu; diff --git a/include/linux/smp.h b/include/linux/smp.h index 7ee202ad21a6..80d557ef8a11 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -12,29 +12,22 @@ #include #include #include -#include +#include typedef void (*smp_call_func_t)(void *info); typedef bool (*smp_cond_func_t)(int cpu, void *info); -enum { - CSD_FLAG_LOCK = 0x01, - - /* IRQ_WORK_flags */ - - CSD_TYPE_ASYNC = 0x00, - CSD_TYPE_SYNC = 0x10, - CSD_TYPE_IRQ_WORK = 0x20, - CSD_TYPE_TTWU = 0x30, - CSD_FLAG_TYPE_MASK = 0xF0, -}; - /* * structure shares (partial) layout with struct irq_work */ struct __call_single_data { - struct llist_node llist; - unsigned int flags; + union { + struct __call_single_node node; + struct { + struct llist_node llist; + unsigned int flags; + }; + }; smp_call_func_t func; void *info; }; diff --git a/include/linux/smp_types.h b/include/linux/smp_types.h new file mode 100644 index 000000000000..364b3ae3e41d --- /dev/null +++ b/include/linux/smp_types.h @@ -0,0 +1,66 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __LINUX_SMP_TYPES_H +#define __LINUX_SMP_TYPES_H + +#include + +enum { + CSD_FLAG_LOCK = 0x01, + + IRQ_WORK_PENDING = 0x01, + IRQ_WORK_BUSY = 0x02, + IRQ_WORK_LAZY = 0x04, /* No IPI, wait for tick */ + IRQ_WORK_HARD_IRQ = 0x08, /* IRQ context on PREEMPT_RT */ + + IRQ_WORK_CLAIMED = (IRQ_WORK_PENDING | IRQ_WORK_BUSY), + + CSD_TYPE_ASYNC = 0x00, + CSD_TYPE_SYNC = 0x10, + CSD_TYPE_IRQ_WORK = 0x20, + CSD_TYPE_TTWU = 0x30, + + CSD_FLAG_TYPE_MASK = 0xF0, +}; + +/* + * struct __call_single_node is the primary type on + * smp.c:call_single_queue. + * + * flush_smp_call_function_queue() only reads the type from + * __call_single_node::u_flags as a regular load, the above + * (anonymous) enum defines all the bits of this word. + * + * Other bits are not modified until the type is known. + * + * CSD_TYPE_SYNC/ASYNC: + * struct { + * struct llist_node node; + * unsigned int flags; + * smp_call_func_t func; + * void *info; + * }; + * + * CSD_TYPE_IRQ_WORK: + * struct { + * struct llist_node node; + * atomic_t flags; + * void (*func)(struct irq_work *); + * }; + * + * CSD_TYPE_TTWU: + * struct { + * struct llist_node node; + * unsigned int flags; + * }; + * + */ + +struct __call_single_node { + struct llist_node llist; + union { + unsigned int u_flags; + atomic_t a_flags; + }; +}; + +#endif /* __LINUX_SMP_TYPES_H */ diff --git a/kernel/sched/core.c b/kernel/sched/core.c index f778067de277..ca5db40392d4 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -2293,7 +2293,7 @@ void sched_ttwu_pending(void *arg) rq_lock_irqsave(rq, &rf); update_rq_clock(rq); - llist_for_each_entry_safe(p, t, llist, wake_entry) { + llist_for_each_entry_safe(p, t, llist, wake_entry.llist) { if (WARN_ON_ONCE(p->on_cpu)) smp_cond_load_acquire(&p->on_cpu, !VAL); @@ -2329,7 +2329,7 @@ static void __ttwu_queue_wakelist(struct task_struct *p, int cpu, int wake_flags p->sched_remote_wakeup = !!(wake_flags & WF_MIGRATED); WRITE_ONCE(rq->ttwu_pending, 1); - __smp_call_single_queue(cpu, &p->wake_entry); + __smp_call_single_queue(cpu, &p->wake_entry.llist); } void wake_up_if_idle(int cpu) @@ -2786,7 +2786,7 @@ static void __sched_fork(unsigned long clone_flags, struct task_struct *p) #endif init_numa_balancing(clone_flags, p); #ifdef CONFIG_SMP - p->wake_entry_type = CSD_TYPE_TTWU; + p->wake_entry.u_flags = CSD_TYPE_TTWU; #endif } diff --git a/kernel/smp.c b/kernel/smp.c index 472c2b274c65..aa17eedff5be 100644 --- a/kernel/smp.c +++ b/kernel/smp.c @@ -669,24 +669,6 @@ void __init smp_init(void) { int num_nodes, num_cpus; - /* - * Ensure struct irq_work layout matches so that - * flush_smp_call_function_queue() can do horrible things. - */ - BUILD_BUG_ON(offsetof(struct irq_work, llnode) != - offsetof(struct __call_single_data, llist)); - BUILD_BUG_ON(offsetof(struct irq_work, func) != - offsetof(struct __call_single_data, func)); - BUILD_BUG_ON(offsetof(struct irq_work, flags) != - offsetof(struct __call_single_data, flags)); - - /* - * Assert the CSD_TYPE_TTWU layout is similar enough - * for task_struct to be on the @call_single_queue. - */ - BUILD_BUG_ON(offsetof(struct task_struct, wake_entry_type) - offsetof(struct task_struct, wake_entry) != - offsetof(struct __call_single_data, flags) - offsetof(struct __call_single_data, llist)); - idle_threads_init(); cpuhp_threads_init(); From e21cf43406a190adfcc4bfe592768066fb3aaa9b Mon Sep 17 00:00:00 2001 From: Vincent Guittot Date: Wed, 24 Jun 2020 17:44:22 +0200 Subject: [PATCH 573/618] sched/cfs: change initial value of runnable_avg Some performance regression on reaim benchmark have been raised with commit 070f5e860ee2 ("sched/fair: Take into account runnable_avg to classify group") The problem comes from the init value of runnable_avg which is initialized with max value. This can be a problem if the newly forked task is finally a short task because the group of CPUs is wrongly set to overloaded and tasks are pulled less agressively. Set initial value of runnable_avg equals to util_avg to reflect that there is no waiting time so far. Fixes: 070f5e860ee2 ("sched/fair: Take into account runnable_avg to classify group") Reported-by: kernel test robot Signed-off-by: Vincent Guittot Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20200624154422.29166-1-vincent.guittot@linaro.org --- kernel/sched/fair.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index cbcb2f71599b..658aa7a2ae6f 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -806,7 +806,7 @@ void post_init_entity_util_avg(struct task_struct *p) } } - sa->runnable_avg = cpu_scale; + sa->runnable_avg = sa->util_avg; if (p->sched_class != &fair_sched_class) { /* From 9ebcfadb0610322ac537dd7aa5d9cbc2b2894c68 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 28 Jun 2020 15:00:24 -0700 Subject: [PATCH 574/618] Linux 5.8-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index ac2c61c37a73..a60c98519c37 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 8 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Kleptomaniac Octopus # *DOCUMENTATION* From 4ba6ccd695f5ed3ae851e59b443b757bbe4557fe Mon Sep 17 00:00:00 2001 From: "Hyeongseok.Kim" Date: Tue, 9 Jun 2020 14:30:44 +0900 Subject: [PATCH 575/618] exfat: Set the unused characters of FileName field to the value 0000h Some fsck tool complain that padding part of the FileName field is not set to the value 0000h. So let's maintain filesystem cleaner, as exfat's spec. recommendation. Signed-off-by: Hyeongseok.Kim Reviewed-by: Sungjong Seo Signed-off-by: Namjae Jeon --- fs/exfat/dir.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/fs/exfat/dir.c b/fs/exfat/dir.c index de43534aa299..8e775bd5d523 100644 --- a/fs/exfat/dir.c +++ b/fs/exfat/dir.c @@ -425,10 +425,12 @@ static void exfat_init_name_entry(struct exfat_dentry *ep, ep->dentry.name.flags = 0x0; for (i = 0; i < EXFAT_FILE_NAME_LEN; i++) { - ep->dentry.name.unicode_0_14[i] = cpu_to_le16(*uniname); - if (*uniname == 0x0) - break; - uniname++; + if (*uniname != 0x0) { + ep->dentry.name.unicode_0_14[i] = cpu_to_le16(*uniname); + uniname++; + } else { + ep->dentry.name.unicode_0_14[i] = 0x0; + } } } From e8dd3cda8667118b70d9fe527f61fe22623de04d Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 10 Jun 2020 20:22:13 +0300 Subject: [PATCH 576/618] exfat: add missing brelse() calls on error paths If the second exfat_get_dentry() call fails then we need to release "old_bh" before returning. There is a similar bug in exfat_move_file(). Fixes: 5f2aa075070c ("exfat: add inode operations") Reported-by: Markus Elfring Signed-off-by: Dan Carpenter Signed-off-by: Namjae Jeon --- fs/exfat/namei.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/fs/exfat/namei.c b/fs/exfat/namei.c index 5b0f35329d63..edd8023865a0 100644 --- a/fs/exfat/namei.c +++ b/fs/exfat/namei.c @@ -1077,10 +1077,14 @@ static int exfat_rename_file(struct inode *inode, struct exfat_chain *p_dir, epold = exfat_get_dentry(sb, p_dir, oldentry + 1, &old_bh, §or_old); + if (!epold) + return -EIO; epnew = exfat_get_dentry(sb, p_dir, newentry + 1, &new_bh, §or_new); - if (!epold || !epnew) + if (!epnew) { + brelse(old_bh); return -EIO; + } memcpy(epnew, epold, DENTRY_SIZE); exfat_update_bh(sb, new_bh, sync); @@ -1161,10 +1165,14 @@ static int exfat_move_file(struct inode *inode, struct exfat_chain *p_olddir, epmov = exfat_get_dentry(sb, p_olddir, oldentry + 1, &mov_bh, §or_mov); + if (!epmov) + return -EIO; epnew = exfat_get_dentry(sb, p_newdir, newentry + 1, &new_bh, §or_new); - if (!epmov || !epnew) + if (!epnew) { + brelse(mov_bh); return -EIO; + } memcpy(epnew, epmov, DENTRY_SIZE); exfat_update_bh(sb, new_bh, IS_DIRSYNC(inode)); From a0271a15cf2cf907ea5b0f2ba611123f1b7935ec Mon Sep 17 00:00:00 2001 From: Hyunchul Lee Date: Tue, 16 Jun 2020 14:34:45 +0900 Subject: [PATCH 577/618] exfat: call sync_filesystem for read-only remount We need to commit dirty metadata and pages to disk before remounting exfat as read-only. This fixes a failure in xfstests generic/452 generic/452 does the following: cp something / mount -o remount,ro the /something is corrupted. because while exfat is remounted as read-only, exfat doesn't have a chance to commit metadata and vfs invalidates page caches in a block device. Signed-off-by: Hyunchul Lee Acked-by: Sungjong Seo Signed-off-by: Namjae Jeon --- fs/exfat/super.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/exfat/super.c b/fs/exfat/super.c index e650e65536f8..253a92460d52 100644 --- a/fs/exfat/super.c +++ b/fs/exfat/super.c @@ -693,10 +693,20 @@ static void exfat_free(struct fs_context *fc) } } +static int exfat_reconfigure(struct fs_context *fc) +{ + fc->sb_flags |= SB_NODIRATIME; + + /* volume flag will be updated in exfat_sync_fs */ + sync_filesystem(fc->root->d_sb); + return 0; +} + static const struct fs_context_operations exfat_context_ops = { .parse_param = exfat_parse_param, .get_tree = exfat_get_tree, .free = exfat_free, + .reconfigure = exfat_reconfigure, }; static int exfat_init_fs_context(struct fs_context *fc) From 3bcfb701099acf96b0e883bf5544f96af473aa1d Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 17 Jun 2020 12:17:18 +0900 Subject: [PATCH 578/618] exfat: move setting VOL_DIRTY over exfat_remove_entries() Move setting VOL_DIRTY over exfat_remove_entries() to avoid unneeded leaving VOL_DIRTY on -ENOTEMPTY. Fixes: 5f2aa075070c ("exfat: add inode operations") Cc: stable@vger.kernel.org # v5.7 Reported-by: Tetsuhiro Kohada Reviewed-by: Sungjong Seo Signed-off-by: Namjae Jeon --- fs/exfat/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/exfat/namei.c b/fs/exfat/namei.c index edd8023865a0..2b9e21094a96 100644 --- a/fs/exfat/namei.c +++ b/fs/exfat/namei.c @@ -975,7 +975,6 @@ static int exfat_rmdir(struct inode *dir, struct dentry *dentry) goto unlock; } - exfat_set_vol_flags(sb, VOL_DIRTY); exfat_chain_set(&clu_to_free, ei->start_clu, EXFAT_B_TO_CLU_ROUND_UP(i_size_read(inode), sbi), ei->flags); @@ -1002,6 +1001,7 @@ static int exfat_rmdir(struct inode *dir, struct dentry *dentry) num_entries++; brelse(bh); + exfat_set_vol_flags(sb, VOL_DIRTY); err = exfat_remove_entries(dir, &cdir, entry, 0, num_entries); if (err) { exfat_err(sb, "failed to exfat_remove_entries : err(%d)", err); From 5267456e953fd8c5abd8e278b1cc6a9f9027ac0a Mon Sep 17 00:00:00 2001 From: Sungjong Seo Date: Thu, 18 Jun 2020 20:43:26 +0900 Subject: [PATCH 579/618] exfat: flush dirty metadata in fsync generic_file_fsync() exfat used could not guarantee the consistency of a file because it has flushed not dirty metadata but only dirty data pages for a file. Instead of that, use exfat_file_fsync() for files and directories so that it guarantees to commit both the metadata and data pages for a file. Signed-off-by: Sungjong Seo Signed-off-by: Namjae Jeon --- fs/exfat/dir.c | 2 +- fs/exfat/exfat_fs.h | 1 + fs/exfat/file.c | 19 ++++++++++++++++++- 3 files changed, 20 insertions(+), 2 deletions(-) diff --git a/fs/exfat/dir.c b/fs/exfat/dir.c index 8e775bd5d523..91ece649285d 100644 --- a/fs/exfat/dir.c +++ b/fs/exfat/dir.c @@ -309,7 +309,7 @@ const struct file_operations exfat_dir_operations = { .llseek = generic_file_llseek, .read = generic_read_dir, .iterate = exfat_iterate, - .fsync = generic_file_fsync, + .fsync = exfat_file_fsync, }; int exfat_alloc_new_dir(struct inode *inode, struct exfat_chain *clu) diff --git a/fs/exfat/exfat_fs.h b/fs/exfat/exfat_fs.h index 595f3117f492..7579cd3bbadb 100644 --- a/fs/exfat/exfat_fs.h +++ b/fs/exfat/exfat_fs.h @@ -420,6 +420,7 @@ void exfat_truncate(struct inode *inode, loff_t size); int exfat_setattr(struct dentry *dentry, struct iattr *attr); int exfat_getattr(const struct path *path, struct kstat *stat, unsigned int request_mask, unsigned int query_flags); +int exfat_file_fsync(struct file *file, loff_t start, loff_t end, int datasync); /* namei.c */ extern const struct dentry_operations exfat_dentry_ops; diff --git a/fs/exfat/file.c b/fs/exfat/file.c index fce03f318787..3b7fea465fd4 100644 --- a/fs/exfat/file.c +++ b/fs/exfat/file.c @@ -6,6 +6,7 @@ #include #include #include +#include #include "exfat_raw.h" #include "exfat_fs.h" @@ -346,12 +347,28 @@ int exfat_setattr(struct dentry *dentry, struct iattr *attr) return error; } +int exfat_file_fsync(struct file *filp, loff_t start, loff_t end, int datasync) +{ + struct inode *inode = filp->f_mapping->host; + int err; + + err = __generic_file_fsync(filp, start, end, datasync); + if (err) + return err; + + err = sync_blockdev(inode->i_sb->s_bdev); + if (err) + return err; + + return blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL); +} + const struct file_operations exfat_file_operations = { .llseek = generic_file_llseek, .read_iter = generic_file_read_iter, .write_iter = generic_file_write_iter, .mmap = generic_file_mmap, - .fsync = generic_file_fsync, + .fsync = exfat_file_fsync, .splice_read = generic_file_splice_read, .splice_write = iter_file_splice_write, }; From b45fd13be340e4ed0a2a9673ba299eb2a71ba829 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Thu, 26 Mar 2020 22:29:05 +0800 Subject: [PATCH 580/618] thermal/drivers: imx: Fix missing of_node_put() at probe time After finishing using cpu node got from of_get_cpu_node(), of_node_put() needs to be called. Signed-off-by: Anson Huang Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/1585232945-23368-1-git-send-email-Anson.Huang@nxp.com --- drivers/thermal/imx_thermal.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index e761c9b42217..1b84ea674edb 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -649,7 +649,7 @@ MODULE_DEVICE_TABLE(of, of_imx_thermal_match); static int imx_thermal_register_legacy_cooling(struct imx_thermal_data *data) { struct device_node *np; - int ret; + int ret = 0; data->policy = cpufreq_cpu_get(0); if (!data->policy) { @@ -664,11 +664,12 @@ static int imx_thermal_register_legacy_cooling(struct imx_thermal_data *data) if (IS_ERR(data->cdev)) { ret = PTR_ERR(data->cdev); cpufreq_cpu_put(data->policy); - return ret; } } - return 0; + of_node_put(np); + + return ret; } static void imx_thermal_unregister_legacy_cooling(struct imx_thermal_data *data) From 14533a5a6c12e8d7de79d309d4085bf186058fe1 Mon Sep 17 00:00:00 2001 From: Michael Kao Date: Mon, 23 Mar 2020 20:15:35 +0800 Subject: [PATCH 581/618] thermal/drivers/mediatek: Fix bank number settings on mt8183 MT8183_NUM_ZONES should be set to 1 because MT8183 doesn't have multiple banks. Fixes: a4ffe6b52d27 ("thermal: mediatek: add support for MT8183") Signed-off-by: Michael Kao Signed-off-by: Hsin-Yi Wang Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200323121537.22697-6-michael.kao@mediatek.com --- drivers/thermal/mtk_thermal.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c index 76e30603d4d5..6b7ef1993d7e 100644 --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -211,6 +211,9 @@ enum { /* The total number of temperature sensors in the MT8183 */ #define MT8183_NUM_SENSORS 6 +/* The number of banks in the MT8183 */ +#define MT8183_NUM_ZONES 1 + /* The number of sensing points per bank */ #define MT8183_NUM_SENSORS_PER_ZONE 6 @@ -497,7 +500,7 @@ static const struct mtk_thermal_data mt7622_thermal_data = { */ static const struct mtk_thermal_data mt8183_thermal_data = { .auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL, - .num_banks = MT8183_NUM_SENSORS_PER_ZONE, + .num_banks = MT8183_NUM_ZONES, .num_sensors = MT8183_NUM_SENSORS, .vts_index = mt8183_vts_index, .cali_val = MT8183_CALIBRATION, From b4147917ad4ff2c755e01a7ca296b14030d2d507 Mon Sep 17 00:00:00 2001 From: Tiezhu Yang Date: Mon, 25 May 2020 09:59:01 +0800 Subject: [PATCH 582/618] thermal/drivers/sprd: Fix return value of sprd_thm_probe() When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Fixes: 554fdbaf19b1 ("thermal: sprd: Add Spreadtrum thermal driver support") Signed-off-by: Tiezhu Yang Reviewed-by: Baolin Wang Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/1590371941-25430-1-git-send-email-yangtiezhu@loongson.cn --- drivers/thermal/sprd_thermal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/sprd_thermal.c b/drivers/thermal/sprd_thermal.c index a340374e8c51..4cde70dcf655 100644 --- a/drivers/thermal/sprd_thermal.c +++ b/drivers/thermal/sprd_thermal.c @@ -348,8 +348,8 @@ static int sprd_thm_probe(struct platform_device *pdev) thm->var_data = pdata; thm->base = devm_platform_ioremap_resource(pdev, 0); - if (!thm->base) - return -ENOMEM; + if (IS_ERR(thm->base)) + return PTR_ERR(thm->base); thm->nr_sensors = of_get_child_count(np); if (thm->nr_sensors == 0 || thm->nr_sensors > SPRD_THM_MAX_SENSOR) { From 3ecc82926be729cb107a287cb6b1f07a2adb44bb Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Wed, 27 May 2020 16:38:46 +0530 Subject: [PATCH 583/618] thermal/drivers/tsens: Fix compilation warnings by making functions static After merging tsens-common.c into tsens.c, we can now mark some functions static so they don't need any prototype declarations. This fixes the following issue reported by lkp. >> drivers/thermal/qcom/tsens.c:385:13: warning: no previous prototype for 'tsens_critical_irq_thread' [-Wmissing-prototypes] 385 | irqreturn_t tsens_critical_irq_thread(int irq, void *data) | ^~~~~~~~~~~~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:455:13: warning: no previous prototype for 'tsens_irq_thread' [-Wmissing-prototypes] 455 | irqreturn_t tsens_irq_thread(int irq, void *data) | ^~~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:523:5: warning: no previous prototype for 'tsens_set_trips' [-Wmissing-prototypes] 523 | int tsens_set_trips(void *_sensor, int low, int high) | ^~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:560:5: warning: no previous prototype for 'tsens_enable_irq' [-Wmissing-prototypes] 560 | int tsens_enable_irq(struct tsens_priv *priv) | ^~~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:573:6: warning: no previous prototype for 'tsens_disable_irq' [-Wmissing-prototypes] 573 | void tsens_disable_irq(struct tsens_priv *priv) | ^~~~~~~~~~~~~~~~~ Signed-off-by: Amit Kucheria Reported-by: kbuild test robot Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/6757a26876b29922929abf64b1c11fa3b3033d03.1590579709.git.amit.kucheria@linaro.org --- drivers/thermal/qcom/tsens.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index 8d3e94d2a9ed..39c4462e38f6 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -382,7 +382,7 @@ static inline u32 masked_irq(u32 hw_id, u32 mask, enum tsens_ver ver) * * Return: IRQ_HANDLED */ -irqreturn_t tsens_critical_irq_thread(int irq, void *data) +static irqreturn_t tsens_critical_irq_thread(int irq, void *data) { struct tsens_priv *priv = data; struct tsens_irq_data d; @@ -452,7 +452,7 @@ irqreturn_t tsens_critical_irq_thread(int irq, void *data) * * Return: IRQ_HANDLED */ -irqreturn_t tsens_irq_thread(int irq, void *data) +static irqreturn_t tsens_irq_thread(int irq, void *data) { struct tsens_priv *priv = data; struct tsens_irq_data d; @@ -520,7 +520,7 @@ irqreturn_t tsens_irq_thread(int irq, void *data) return IRQ_HANDLED; } -int tsens_set_trips(void *_sensor, int low, int high) +static int tsens_set_trips(void *_sensor, int low, int high) { struct tsens_sensor *s = _sensor; struct tsens_priv *priv = s->priv; @@ -557,7 +557,7 @@ int tsens_set_trips(void *_sensor, int low, int high) return 0; } -int tsens_enable_irq(struct tsens_priv *priv) +static int tsens_enable_irq(struct tsens_priv *priv) { int ret; int val = tsens_version(priv) > VER_1_X ? 7 : 1; @@ -570,7 +570,7 @@ int tsens_enable_irq(struct tsens_priv *priv) return ret; } -void tsens_disable_irq(struct tsens_priv *priv) +static void tsens_disable_irq(struct tsens_priv *priv) { regmap_field_write(priv->rf[INT_EN], 0); } From 371a3bc79c11b707d7a1b7a2c938dc3cc042fffb Mon Sep 17 00:00:00 2001 From: Finley Xiao Date: Fri, 19 Jun 2020 17:08:25 +0800 Subject: [PATCH 584/618] thermal/drivers/cpufreq_cooling: Fix wrong frequency converted from power The function cpu_power_to_freq is used to find a frequency and set the cooling device to consume at most the power to be converted. For example, if the power to be converted is 80mW, and the em table is as follow. struct em_cap_state table[] = { /* KHz mW */ { 1008000, 36, 0 }, { 1200000, 49, 0 }, { 1296000, 59, 0 }, { 1416000, 72, 0 }, { 1512000, 86, 0 }, }; The target frequency should be 1416000KHz, not 1512000KHz. Fixes: 349d39dc5739 ("thermal: cpu_cooling: merge frequency and power tables") Cc: # v4.13+ Signed-off-by: Finley Xiao Acked-by: Viresh Kumar Reviewed-by: Amit Kucheria Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200619090825.32747-1-finley.xiao@rock-chips.com --- drivers/thermal/cpufreq_cooling.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/thermal/cpufreq_cooling.c b/drivers/thermal/cpufreq_cooling.c index 9e124020519f..6c0e1b053126 100644 --- a/drivers/thermal/cpufreq_cooling.c +++ b/drivers/thermal/cpufreq_cooling.c @@ -123,12 +123,12 @@ static u32 cpu_power_to_freq(struct cpufreq_cooling_device *cpufreq_cdev, { int i; - for (i = cpufreq_cdev->max_level - 1; i >= 0; i--) { - if (power > cpufreq_cdev->em->table[i].power) + for (i = cpufreq_cdev->max_level; i >= 0; i--) { + if (power >= cpufreq_cdev->em->table[i].power) break; } - return cpufreq_cdev->em->table[i + 1].frequency; + return cpufreq_cdev->em->table[i].frequency; } /** From 5f8f06425a0dcdad7bedbb77e67f5c65ab4dacfc Mon Sep 17 00:00:00 2001 From: Dien Pham Date: Thu, 25 Jun 2020 20:38:19 +0900 Subject: [PATCH 585/618] thermal/drivers/rcar_gen3: Fix undefined temperature if negative As description for DIV_ROUND_CLOSEST in file include/linux/kernel.h. "Result is undefined for negative divisors if the dividend variable type is unsigned and for negative dividends if the divisor variable type is unsigned." In current code, the FIXPT_DIV uses DIV_ROUND_CLOSEST but has not checked sign of divisor before using. It makes undefined temperature value in case the value is negative. This patch fixes to satisfy DIV_ROUND_CLOSEST description and fix bug too. Note that the variable name "reg" is not good because it should be the same type as rcar_gen3_thermal_read(). However, it's better to rename the "reg" in a further patch as cleanup. Signed-off-by: Van Do Signed-off-by: Dien Pham [shimoda: minor fixes, add Fixes tag] Fixes: 564e73d283af ("thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver") Signed-off-by: Yoshihiro Shimoda Reviewed-by: Niklas Soderlund Tested-by: Niklas Soderlund Reviewed-by: Amit Kucheria Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/1593085099-2057-1-git-send-email-yoshihiro.shimoda.uh@renesas.com --- drivers/thermal/rcar_gen3_thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c index 58fe7c1ef00b..c48c5e9b8f20 100644 --- a/drivers/thermal/rcar_gen3_thermal.c +++ b/drivers/thermal/rcar_gen3_thermal.c @@ -167,7 +167,7 @@ static int rcar_gen3_thermal_get_temp(void *devdata, int *temp) { struct rcar_gen3_thermal_tsc *tsc = devdata; int mcelsius, val; - u32 reg; + int reg; /* Read register and convert to mili Celsius */ reg = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK; From 77b48bea2fee47c15a835f6725dd8df0bc38375a Mon Sep 17 00:00:00 2001 From: Joseph Salisbury Date: Fri, 26 Jun 2020 15:28:17 -0700 Subject: [PATCH 586/618] Drivers: hv: Change flag to write log level in panic msg to false When the kernel panics, one page of kmsg data may be collected and sent to Hyper-V to aid in diagnosing the failure. The collected kmsg data typically contains 50 to 100 lines, each of which has a log level prefix that isn't very useful from a diagnostic standpoint. So tell kmsg_dump_get_buffer() to not include the log level, enabling more information that *is* useful to fit in the page. Requesting in stable kernels, since many kernels running in production are stable releases. Cc: stable@vger.kernel.org Signed-off-by: Joseph Salisbury Reviewed-by: Michael Kelley Link: https://lore.kernel.org/r/1593210497-114310-1-git-send-email-joseph.salisbury@microsoft.com Signed-off-by: Wei Liu --- drivers/hv/vmbus_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 9147ee9d5f7d..d69f4efa3719 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -1368,7 +1368,7 @@ static void hv_kmsg_dump(struct kmsg_dumper *dumper, * Write dump contents to the page. No need to synchronize; panic should * be single-threaded. */ - kmsg_dump_get_buffer(dumper, true, hv_panic_page, HV_HYP_PAGE_SIZE, + kmsg_dump_get_buffer(dumper, false, hv_panic_page, HV_HYP_PAGE_SIZE, &bytes_written); if (bytes_written) hyperv_report_panic_msg(panic_pa, bytes_written); From bfe373f608cf81b7626dfeb904001b0e867c5110 Mon Sep 17 00:00:00 2001 From: Hou Tao Date: Tue, 28 Apr 2020 09:54:56 +0800 Subject: [PATCH 587/618] blk-mq-debugfs: update blk_queue_flag_name[] accordingly for new flags Else there may be magic numbers in /sys/kernel/debug/block/*/state. Signed-off-by: Hou Tao Reviewed-by: Bart Van Assche Signed-off-by: Jens Axboe --- block/blk-mq-debugfs.c | 3 +++ include/linux/blkdev.h | 1 + 2 files changed, 4 insertions(+) diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c index 15df3a36e9fa..e0b2bc131bf5 100644 --- a/block/blk-mq-debugfs.c +++ b/block/blk-mq-debugfs.c @@ -125,6 +125,9 @@ static const char *const blk_queue_flag_name[] = { QUEUE_FLAG_NAME(REGISTERED), QUEUE_FLAG_NAME(SCSI_PASSTHROUGH), QUEUE_FLAG_NAME(QUIESCED), + QUEUE_FLAG_NAME(PCI_P2PDMA), + QUEUE_FLAG_NAME(ZONE_RESETALL), + QUEUE_FLAG_NAME(RQ_ALLOC_TIME), }; #undef QUEUE_FLAG_NAME diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 8fd900998b4e..57241417ff2f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -590,6 +590,7 @@ struct request_queue { u64 write_hints[BLK_MAX_WRITE_HINTS]; }; +/* Keep blk_queue_flag_name[] in sync with the definitions below */ #define QUEUE_FLAG_STOPPED 0 /* queue is stopped */ #define QUEUE_FLAG_DYING 1 /* queue being torn down */ #define QUEUE_FLAG_NOMERGES 3 /* disable merge attempts */ From d63bd8c81d8ab64db506ffde569cc8ff197516e2 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Wed, 17 Jun 2020 09:53:40 +0300 Subject: [PATCH 588/618] m68k: nommu: register start of the memory with memblock The m68k nommu setup code didn't register the beginning of the physical memory with memblock because it was anyway occupied by the kernel. However, commit fa3354e4ea39 ("mm: free_area_init: use maximal zone PFNs rather than zone sizes") changed zones initialization to use memblock.memory to detect the zone extents and this caused inconsistency between zone PFNs and the actual PFNs: BUG: Bad page state in process swapper pfn:20165 page:41fe0ca0 refcount:0 mapcount:1 mapping:00000000 index:0x0 flags: 0x0() raw: 00000000 00000100 00000122 00000000 00000000 00000000 00000000 00000000 page dumped because: nonzero mapcount CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc1-00001-g3a38f8a60c65-dirty #1 Stack from 404c9ebc: 404c9ebc 4029ab28 4029ab28 40088470 41fe0ca0 40299e21 40299df1 404ba2a4 00020165 00000000 41fd2c10 402c7ba0 41fd2c04 40088504 41fe0ca0 40299e21 00000000 40088a12 41fe0ca0 41fe0ca4 0000020a 00000000 00000001 402ca000 00000000 41fe0ca0 41fd2c10 41fd2c10 00000000 00000000 402b2388 00000001 400a0934 40091056 404c9f44 404c9f44 40088db4 402c7ba0 00000001 41fd2c04 41fe0ca0 41fd2000 41fe0ca0 40089e02 4026ecf4 40089e4e 41fe0ca0 ffffffff Call Trace: [<40088470>] 0x40088470 [<40088504>] 0x40088504 [<40088a12>] 0x40088a12 [<402ca000>] 0x402ca000 [<400a0934>] 0x400a0934 Adjust the memory registration with memblock to include the beginning of the physical memory and make sure that the area occupied by the kernel is marked as reserved. Signed-off-by: Mike Rapoport Signed-off-by: Greg Ungerer --- arch/m68k/kernel/setup_no.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c index e779b19e0193..f66f4b1d062e 100644 --- a/arch/m68k/kernel/setup_no.c +++ b/arch/m68k/kernel/setup_no.c @@ -138,7 +138,8 @@ void __init setup_arch(char **cmdline_p) pr_debug("MEMORY -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx\n ", __bss_stop, memory_start, memory_start, memory_end); - memblock_add(memory_start, memory_end - memory_start); + memblock_add(_rambase, memory_end - _rambase); + memblock_reserve(_rambase, memory_start - _rambase); /* Keep a copy of command line */ *cmdline_p = &command_line[0]; From c43e55796dd4d13f4855971a4d7970ce2cd94db4 Mon Sep 17 00:00:00 2001 From: Angelo Dureghello Date: Wed, 17 Jun 2020 09:53:41 +0300 Subject: [PATCH 589/618] m68k: mm: fix node memblock init After pulling 5.7.0 (linux-next merge), mcf5441x mmu boot was hanging silently. memblock_add() seems not appropriate, since using MAX_NUMNODES as node id, while memblock_add_node() sets up memory for node id 0. Signed-off-by: Angelo Dureghello Signed-off-by: Mike Rapoport Signed-off-by: Greg Ungerer --- arch/m68k/mm/mcfmmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c index 29f47923aa46..7d04210d34f0 100644 --- a/arch/m68k/mm/mcfmmu.c +++ b/arch/m68k/mm/mcfmmu.c @@ -174,7 +174,7 @@ void __init cf_bootmem_alloc(void) m68k_memory[0].addr = _rambase; m68k_memory[0].size = _ramend - _rambase; - memblock_add(m68k_memory[0].addr, m68k_memory[0].size); + memblock_add_node(m68k_memory[0].addr, m68k_memory[0].size, 0); /* compute total pages in system */ num_pages = PFN_DOWN(_ramend - _rambase); From b6509f6a8c4313c068c69785c001451415969e44 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Mon, 29 Jun 2020 15:41:45 +0100 Subject: [PATCH 590/618] Revert "fs: Do not check if there is a fsnotify watcher on pseudo inodes" This reverts commit e9c15badbb7b ("fs: Do not check if there is a fsnotify watcher on pseudo inodes"). The commit intended to eliminate fsnotify-related overhead for pseudo inodes but it is broken in concept. inotify can receive events of pipe files under /proc/X/fd and chromium relies on close and open events for sandboxing. Maxim Levitsky reported the following Chromium starts as a white rectangle, shows few white rectangles that resemble its notifications and then crashes. The stdout output from chromium: [mlevitsk@starship ~]$chromium-freeworld mesa: for the --simplifycfg-sink-common option: may only occur zero or one times! mesa: for the --global-isel-abort option: may only occur zero or one times! [3379:3379:0628/135151.440930:ERROR:browser_switcher_service.cc(238)] XXX Init() ../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0072 Received signal 11 SEGV_MAPERR 0000004a9048 Crashes are not universal but even if chromium does not crash, it certainly does not work properly. While filtering just modify and access might be safe, the benefit is not worth the risk hence the revert. Reported-by: Maxim Levitsky Fixes: e9c15badbb7b ("fs: Do not check if there is a fsnotify watcher on pseudo inodes") Signed-off-by: Mel Gorman Signed-off-by: Linus Torvalds --- fs/file_table.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/file_table.c b/fs/file_table.c index 65603502fed6..656647f9575a 100644 --- a/fs/file_table.c +++ b/fs/file_table.c @@ -230,7 +230,7 @@ struct file *alloc_file_pseudo(struct inode *inode, struct vfsmount *mnt, d_set_d_op(path.dentry, &anon_ops); path.mnt = mntget(mnt); d_instantiate(path.dentry, inode); - file = alloc_file(&path, flags | FMODE_NONOTIFY, fops); + file = alloc_file(&path, flags, fops); if (IS_ERR(file)) { ihold(inode); path_put(&path); From 681370f4b00af0fcc65bbfb9f82de526ab7ceb0a Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 23 Jun 2020 16:00:33 -0400 Subject: [PATCH 591/618] nfsd4: fix nfsdfs reference count loop We don't drop the reference on the nfsdfs filesystem with mntput(nn->nfsd_mnt) until nfsd_exit_net(), but that won't be called until the nfsd module's unloaded, and we can't unload the module as long as there's a reference on nfsdfs. So this prevents module unloading. Fixes: 2c830dd7209b ("nfsd: persist nfsd filesystem across mounts") Reported-and-Tested-by: Luo Xiaogang Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4state.c | 8 +++++++- fs/nfsd/nfsctl.c | 22 ++++++++++++---------- fs/nfsd/nfsd.h | 3 +++ 3 files changed, 22 insertions(+), 11 deletions(-) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index bb3d2c32664a..cce2510b2cca 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -7912,9 +7912,14 @@ nfs4_state_start_net(struct net *net) struct nfsd_net *nn = net_generic(net, nfsd_net_id); int ret; - ret = nfs4_state_create_net(net); + ret = get_nfsdfs(net); if (ret) return ret; + ret = nfs4_state_create_net(net); + if (ret) { + mntput(nn->nfsd_mnt); + return ret; + } locks_start_grace(net, &nn->nfsd4_manager); nfsd4_client_tracking_init(net); if (nn->track_reclaim_completes && nn->reclaim_str_hashtbl_size == 0) @@ -7984,6 +7989,7 @@ nfs4_state_shutdown_net(struct net *net) nfsd4_client_tracking_exit(net); nfs4_state_destroy_net(net); + mntput(nn->nfsd_mnt); } void diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c index b68e96681522..cf98a81ca1ea 100644 --- a/fs/nfsd/nfsctl.c +++ b/fs/nfsd/nfsctl.c @@ -1424,6 +1424,18 @@ static struct file_system_type nfsd_fs_type = { }; MODULE_ALIAS_FS("nfsd"); +int get_nfsdfs(struct net *net) +{ + struct nfsd_net *nn = net_generic(net, nfsd_net_id); + struct vfsmount *mnt; + + mnt = vfs_kern_mount(&nfsd_fs_type, SB_KERNMOUNT, "nfsd", NULL); + if (IS_ERR(mnt)) + return PTR_ERR(mnt); + nn->nfsd_mnt = mnt; + return 0; +} + #ifdef CONFIG_PROC_FS static int create_proc_exports_entry(void) { @@ -1451,7 +1463,6 @@ unsigned int nfsd_net_id; static __net_init int nfsd_init_net(struct net *net) { int retval; - struct vfsmount *mnt; struct nfsd_net *nn = net_generic(net, nfsd_net_id); retval = nfsd_export_init(net); @@ -1478,16 +1489,8 @@ static __net_init int nfsd_init_net(struct net *net) init_waitqueue_head(&nn->ntf_wq); seqlock_init(&nn->boot_lock); - mnt = vfs_kern_mount(&nfsd_fs_type, SB_KERNMOUNT, "nfsd", NULL); - if (IS_ERR(mnt)) { - retval = PTR_ERR(mnt); - goto out_mount_err; - } - nn->nfsd_mnt = mnt; return 0; -out_mount_err: - nfsd_reply_cache_shutdown(nn); out_drc_error: nfsd_idmap_shutdown(net); out_idmap_error: @@ -1500,7 +1503,6 @@ static __net_exit void nfsd_exit_net(struct net *net) { struct nfsd_net *nn = net_generic(net, nfsd_net_id); - mntput(nn->nfsd_mnt); nfsd_reply_cache_shutdown(nn); nfsd_idmap_shutdown(net); nfsd_export_shutdown(net); diff --git a/fs/nfsd/nfsd.h b/fs/nfsd/nfsd.h index 36cdd81b6688..57c832d1b30f 100644 --- a/fs/nfsd/nfsd.h +++ b/fs/nfsd/nfsd.h @@ -90,6 +90,8 @@ void nfsd_destroy(struct net *net); bool i_am_nfsd(void); +int get_nfsdfs(struct net *); + struct nfsdfs_client { struct kref cl_ref; void (*cl_release)(struct kref *kref); @@ -100,6 +102,7 @@ struct dentry *nfsd_client_mkdir(struct nfsd_net *nn, struct nfsdfs_client *ncl, u32 id, const struct tree_descr *); void nfsd_client_rmdir(struct dentry *dentry); + #if defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL) #ifdef CONFIG_NFSD_V2_ACL extern const struct svc_version nfsd_acl_version2; From bf2654017e0268cc83dc88d56f0e67ff4406631d Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 23 Jun 2020 21:01:19 -0400 Subject: [PATCH 592/618] nfsd: fix nfsdfs inode reference count leak I don't understand this code well, but I'm seeing a warning about a still-referenced inode on unmount, and every other similar filesystem does a dput() here. Fixes: e8a79fb14f6b ("nfsd: add nfsd/clients directory") Signed-off-by: J. Bruce Fields --- fs/nfsd/nfsctl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c index cf98a81ca1ea..cd05732f8eaa 100644 --- a/fs/nfsd/nfsctl.c +++ b/fs/nfsd/nfsctl.c @@ -1335,6 +1335,7 @@ void nfsd_client_rmdir(struct dentry *dentry) WARN_ON_ONCE(ret); fsnotify_rmdir(dir, dentry); d_delete(dentry); + dput(dentry); inode_unlock(dir); } From becd2014923ff259b8155df58199f605dd50cb8f Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Mon, 15 Jun 2020 06:25:23 +0000 Subject: [PATCH 593/618] SUNRPC: Add missing definition of ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE Even if that's only a warning, not including asm/cacheflush.h leads to svc_flush_bvec() being empty allthough powerpc defines ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE. CC net/sunrpc/svcsock.o net/sunrpc/svcsock.c:227:5: warning: "ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE" is not defined [-Wundef] #if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE ^ Include linux/highmem.h so that asm/cacheflush.h will be included. Reported-by: Christophe Leroy Reported-by: kernel test robot Fixes: ca07eda33e01 ("SUNRPC: Refactor svc_recvfrom()") Signed-off-by: Christophe Leroy Acked-by: Chuck Lever Signed-off-by: J. Bruce Fields --- net/sunrpc/svcsock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 5c4ec9386f81..c537272f9c7e 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -44,6 +44,7 @@ #include #include #include +#include #include #include From 3e20aa9630e5bcef4f1b9dcb7b50c5491867fd89 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Tue, 16 Jun 2020 08:56:54 -0700 Subject: [PATCH 594/618] block/keyslot-manager: use kvfree_sensitive() Make blk_ksm_destroy() use the kvfree_sensitive() function (which was introduced in v5.8-rc1) instead of open-coding it. Signed-off-by: Eric Biggers Signed-off-by: Jens Axboe --- block/keyslot-manager.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/block/keyslot-manager.c b/block/keyslot-manager.c index c2ef41b3147b..35abcb1ec051 100644 --- a/block/keyslot-manager.c +++ b/block/keyslot-manager.c @@ -374,8 +374,7 @@ void blk_ksm_destroy(struct blk_keyslot_manager *ksm) if (!ksm) return; kvfree(ksm->slot_hashtable); - memzero_explicit(ksm->slots, sizeof(ksm->slots[0]) * ksm->num_slots); - kvfree(ksm->slots); + kvfree_sensitive(ksm->slots, sizeof(ksm->slots[0]) * ksm->num_slots); memzero_explicit(ksm, sizeof(*ksm)); } EXPORT_SYMBOL_GPL(blk_ksm_destroy); From 5be206eaac9a68992fc3b06fb5dd5634e323de86 Mon Sep 17 00:00:00 2001 From: Jarkko Sakkinen Date: Tue, 23 Jun 2020 00:20:20 +0300 Subject: [PATCH 595/618] Revert "tpm: selftest: cleanup after unseal with wrong auth/policy test" The reverted commit illegitly uses tpm2-tools. External dependencies are absolutely forbidden from these tests. There is also the problem that clearing is not necessarily wanted behavior if the test/target computer is not used only solely for testing. Fixes: a9920d3bad40 ("tpm: selftest: cleanup after unseal with wrong auth/policy test") Cc: Tadeusz Struk Cc: stable@vger.kernel.org Cc: linux-integrity@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Signed-off-by: Jarkko Sakkinen Signed-off-by: Shuah Khan --- tools/testing/selftests/tpm2/test_smoke.sh | 5 ----- 1 file changed, 5 deletions(-) diff --git a/tools/testing/selftests/tpm2/test_smoke.sh b/tools/testing/selftests/tpm2/test_smoke.sh index 663062701d5a..79f8e9da5d21 100755 --- a/tools/testing/selftests/tpm2/test_smoke.sh +++ b/tools/testing/selftests/tpm2/test_smoke.sh @@ -8,8 +8,3 @@ ksft_skip=4 python -m unittest -v tpm2_tests.SmokeTest python -m unittest -v tpm2_tests.AsyncTest - -CLEAR_CMD=$(which tpm2_clear) -if [ -n $CLEAR_CMD ]; then - tpm2_clear -T device -fi From 88a16840f462f96d3a1808aff1d6479f87a02147 Mon Sep 17 00:00:00 2001 From: Jarkko Sakkinen Date: Tue, 23 Jun 2020 00:20:21 +0300 Subject: [PATCH 596/618] selftests: tpm: Use 'test -e' instead of 'test -f' 'test -f' is suitable only for *regular* files. Use 'test -e' instead. Cc: Nikita Sobolev Cc: linux-integrity@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Fixes: 5627f9cffee7 ("Kernel selftests: Add check if TPM devices are supported") Signed-off-by: Jarkko Sakkinen Signed-off-by: Shuah Khan --- tools/testing/selftests/tpm2/test_smoke.sh | 2 +- tools/testing/selftests/tpm2/test_space.sh | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/tpm2/test_smoke.sh b/tools/testing/selftests/tpm2/test_smoke.sh index 79f8e9da5d21..338d6b0272dc 100755 --- a/tools/testing/selftests/tpm2/test_smoke.sh +++ b/tools/testing/selftests/tpm2/test_smoke.sh @@ -4,7 +4,7 @@ # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 -[ -f /dev/tpm0 ] || exit $ksft_skip +[ -e /dev/tpm0 ] || exit $ksft_skip python -m unittest -v tpm2_tests.SmokeTest python -m unittest -v tpm2_tests.AsyncTest diff --git a/tools/testing/selftests/tpm2/test_space.sh b/tools/testing/selftests/tpm2/test_space.sh index 36c9d030a1c6..847cabb20a5f 100755 --- a/tools/testing/selftests/tpm2/test_space.sh +++ b/tools/testing/selftests/tpm2/test_space.sh @@ -4,6 +4,6 @@ # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 -[ -f /dev/tpmrm0 ] || exit $ksft_skip +[ -e /dev/tpmrm0 ] || exit $ksft_skip python -m unittest -v tpm2_tests.SpaceTest From 377ff83083c953dd58c5a030b3c9b5b85d8cc727 Mon Sep 17 00:00:00 2001 From: Jarkko Sakkinen Date: Tue, 23 Jun 2020 00:20:22 +0300 Subject: [PATCH 597/618] selftests: tpm: Use /bin/sh instead of /bin/bash It's better to use /bin/sh instead of /bin/bash in order to run the tests in the BusyBox shell. Fixes: 6ea3dfe1e073 ("selftests: add TPM 2.0 tests") Cc: stable@vger.kernel.org Cc: linux-integrity@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Signed-off-by: Jarkko Sakkinen Signed-off-by: Shuah Khan --- tools/testing/selftests/tpm2/test_smoke.sh | 2 +- tools/testing/selftests/tpm2/test_space.sh | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/tpm2/test_smoke.sh b/tools/testing/selftests/tpm2/test_smoke.sh index 338d6b0272dc..1334e301d2a0 100755 --- a/tools/testing/selftests/tpm2/test_smoke.sh +++ b/tools/testing/selftests/tpm2/test_smoke.sh @@ -1,4 +1,4 @@ -#!/bin/bash +#!/bin/sh # SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) # Kselftest framework requirement - SKIP code is 4. diff --git a/tools/testing/selftests/tpm2/test_space.sh b/tools/testing/selftests/tpm2/test_space.sh index 847cabb20a5f..00259cb746cf 100755 --- a/tools/testing/selftests/tpm2/test_space.sh +++ b/tools/testing/selftests/tpm2/test_space.sh @@ -1,4 +1,4 @@ -#!/bin/bash +#!/bin/sh # SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) # Kselftest framework requirement - SKIP code is 4. From 3eb619b2f7d8a98a86a48de8dfa613a205c0eaab Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 29 Jun 2020 12:15:13 -0600 Subject: [PATCH 598/618] scripts/dtc: Update to upstream version v1.6.0-11-g9d7888cbf19c Sync with upstream dtc primarily to pickup the I2C bus check fixes. The interrupt_provider check is noisy, so turn it off for now. This adds the following commits from upstream: 9d7888cbf19c dtc: Consider one-character strings as strings 8259d59f59de checks: Improve i2c reg property checking fdabcf2980a4 checks: Remove warning for I2C_OWN_SLAVE_ADDRESS 2478b1652c8d libfdt: add extern "C" for C++ f68bfc2668b2 libfdt: trivial typo fix 7be250b4d059 libfdt: Correct condition for reordering blocks 81e0919a3e21 checks: Add interrupt provider test 85e5d839847a Makefile: when building libfdt only, do not add unneeded deps b28464a550c5 Fix some potential unaligned accesses in dtc Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/Makefile | 3 +- scripts/Makefile.lib | 4 ++- scripts/dtc/checks.c | 39 ++++++++++++++++++++-- scripts/dtc/dtc.h | 31 +++++++++++++++++ scripts/dtc/flattree.c | 2 +- scripts/dtc/libfdt/fdt_rw.c | 2 +- scripts/dtc/libfdt/fdt_sw.c | 2 +- scripts/dtc/libfdt/libfdt.h | 8 +++++ scripts/dtc/treesource.c | 8 ++--- scripts/dtc/version_gen.h | 2 +- scripts/dtc/yamltree.c | 6 ++-- 11 files changed, 91 insertions(+), 16 deletions(-) diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index a63898954068..0de90e8b4db8 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -43,7 +43,8 @@ extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml override DTC_FLAGS := \ -Wno-avoid_unnecessary_addr_size \ - -Wno-graph_child_address + -Wno-graph_child_address \ + -Wno-interrupt_provider $(obj)/processed-schema-examples.yaml: $(DT_DOCS) check_dtschema_version FORCE $(call if_changed,mk_schema) diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 99ac59c59826..e6411b37ecf6 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -259,6 +259,7 @@ quiet_cmd_gzip = GZIP $@ # DTC # --------------------------------------------------------------------------- DTC ?= $(objtree)/scripts/dtc/dtc +DTC_FLAGS += -Wno-interrupt_provider # Disable noisy checks by default ifeq ($(findstring 1,$(KBUILD_EXTRA_WARN)),) @@ -274,7 +275,8 @@ endif ifneq ($(findstring 2,$(KBUILD_EXTRA_WARN)),) DTC_FLAGS += -Wnode_name_chars_strict \ - -Wproperty_name_chars_strict + -Wproperty_name_chars_strict \ + -Winterrupt_provider endif DTC_FLAGS += $(DTC_FLAGS_$(basetarget)) diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c index 4b3c486f1399..b7955dbd71ca 100644 --- a/scripts/dtc/checks.c +++ b/scripts/dtc/checks.c @@ -1022,6 +1022,9 @@ static void check_i2c_bus_bridge(struct check *c, struct dt_info *dti, struct no } WARNING(i2c_bus_bridge, check_i2c_bus_bridge, NULL, &addr_size_cells); +#define I2C_OWN_SLAVE_ADDRESS (1U << 30) +#define I2C_TEN_BIT_ADDRESS (1U << 31) + static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node *node) { struct property *prop; @@ -1044,6 +1047,8 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node } reg = fdt32_to_cpu(*cells); + /* Ignore I2C_OWN_SLAVE_ADDRESS */ + reg &= ~I2C_OWN_SLAVE_ADDRESS; snprintf(unit_addr, sizeof(unit_addr), "%x", reg); if (!streq(unitname, unit_addr)) FAIL(c, dti, node, "I2C bus unit address format error, expected \"%s\"", @@ -1051,10 +1056,15 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node for (len = prop->val.len; len > 0; len -= 4) { reg = fdt32_to_cpu(*(cells++)); - if (reg > 0x3ff) + /* Ignore I2C_OWN_SLAVE_ADDRESS */ + reg &= ~I2C_OWN_SLAVE_ADDRESS; + + if ((reg & I2C_TEN_BIT_ADDRESS) && ((reg & ~I2C_TEN_BIT_ADDRESS) > 0x3ff)) FAIL_PROP(c, dti, node, prop, "I2C address must be less than 10-bits, got \"0x%x\"", reg); - + else if (reg > 0x7f) + FAIL_PROP(c, dti, node, prop, "I2C address must be less than 7-bits, got \"0x%x\". Set I2C_TEN_BIT_ADDRESS for 10 bit addresses or fix the property", + reg); } } WARNING(i2c_bus_reg, check_i2c_bus_reg, NULL, ®_format, &i2c_bus_bridge); @@ -1547,6 +1557,28 @@ static bool node_is_interrupt_provider(struct node *node) return false; } + +static void check_interrupt_provider(struct check *c, + struct dt_info *dti, + struct node *node) +{ + struct property *prop; + + if (!node_is_interrupt_provider(node)) + return; + + prop = get_property(node, "#interrupt-cells"); + if (!prop) + FAIL(c, dti, node, + "Missing #interrupt-cells in interrupt provider"); + + prop = get_property(node, "#address-cells"); + if (!prop) + FAIL(c, dti, node, + "Missing #address-cells in interrupt provider"); +} +WARNING(interrupt_provider, check_interrupt_provider, NULL); + static void check_interrupts_property(struct check *c, struct dt_info *dti, struct node *node) @@ -1604,7 +1636,7 @@ static void check_interrupts_property(struct check *c, prop = get_property(irq_node, "#interrupt-cells"); if (!prop) { - FAIL(c, dti, irq_node, "Missing #interrupt-cells in interrupt-parent"); + /* We warn about that already in another test. */ return; } @@ -1828,6 +1860,7 @@ static struct check *check_table[] = { &deprecated_gpio_property, &gpios_property, &interrupts_property, + &interrupt_provider, &alias_paths, diff --git a/scripts/dtc/dtc.h b/scripts/dtc/dtc.h index 6e74ecea55a3..a08f4159cd03 100644 --- a/scripts/dtc/dtc.h +++ b/scripts/dtc/dtc.h @@ -51,6 +51,37 @@ extern int annotate; /* annotate .dts with input source location */ typedef uint32_t cell_t; +static inline uint16_t dtb_ld16(const void *p) +{ + const uint8_t *bp = (const uint8_t *)p; + + return ((uint16_t)bp[0] << 8) + | bp[1]; +} + +static inline uint32_t dtb_ld32(const void *p) +{ + const uint8_t *bp = (const uint8_t *)p; + + return ((uint32_t)bp[0] << 24) + | ((uint32_t)bp[1] << 16) + | ((uint32_t)bp[2] << 8) + | bp[3]; +} + +static inline uint64_t dtb_ld64(const void *p) +{ + const uint8_t *bp = (const uint8_t *)p; + + return ((uint64_t)bp[0] << 56) + | ((uint64_t)bp[1] << 48) + | ((uint64_t)bp[2] << 40) + | ((uint64_t)bp[3] << 32) + | ((uint64_t)bp[4] << 24) + | ((uint64_t)bp[5] << 16) + | ((uint64_t)bp[6] << 8) + | bp[7]; +} #define streq(a, b) (strcmp((a), (b)) == 0) #define strstarts(s, prefix) (strncmp((s), (prefix), strlen(prefix)) == 0) diff --git a/scripts/dtc/flattree.c b/scripts/dtc/flattree.c index bd6977eedcb8..07f10d2b5d79 100644 --- a/scripts/dtc/flattree.c +++ b/scripts/dtc/flattree.c @@ -156,7 +156,7 @@ static void asm_emit_data(void *e, struct data d) emit_offset_label(f, m->ref, m->offset); while ((d.len - off) >= sizeof(uint32_t)) { - asm_emit_cell(e, fdt32_to_cpu(*((fdt32_t *)(d.val+off)))); + asm_emit_cell(e, dtb_ld32(d.val + off)); off += sizeof(uint32_t); } diff --git a/scripts/dtc/libfdt/fdt_rw.c b/scripts/dtc/libfdt/fdt_rw.c index 524b520c8486..93e4a2b56348 100644 --- a/scripts/dtc/libfdt/fdt_rw.c +++ b/scripts/dtc/libfdt/fdt_rw.c @@ -436,7 +436,7 @@ int fdt_open_into(const void *fdt, void *buf, int bufsize) return struct_size; } - if (can_assume(LIBFDT_ORDER) | + if (can_assume(LIBFDT_ORDER) || !fdt_blocks_misordered_(fdt, mem_rsv_size, struct_size)) { /* no further work necessary */ err = fdt_move(fdt, buf, bufsize); diff --git a/scripts/dtc/libfdt/fdt_sw.c b/scripts/dtc/libfdt/fdt_sw.c index 26759d5dfb8c..94ce4bb91a00 100644 --- a/scripts/dtc/libfdt/fdt_sw.c +++ b/scripts/dtc/libfdt/fdt_sw.c @@ -32,7 +32,7 @@ static int fdt_sw_probe_(void *fdt) /* 'memrsv' state: Initial state after fdt_create() * * Allowed functions: - * fdt_add_reservmap_entry() + * fdt_add_reservemap_entry() * fdt_finish_reservemap() [moves to 'struct' state] */ static int fdt_sw_probe_memrsv_(void *fdt) diff --git a/scripts/dtc/libfdt/libfdt.h b/scripts/dtc/libfdt/libfdt.h index 36fadcdea516..fe49b5d78938 100644 --- a/scripts/dtc/libfdt/libfdt.h +++ b/scripts/dtc/libfdt/libfdt.h @@ -9,6 +9,10 @@ #include "libfdt_env.h" #include "fdt.h" +#ifdef __cplusplus +extern "C" { +#endif + #define FDT_FIRST_SUPPORTED_VERSION 0x02 #define FDT_LAST_SUPPORTED_VERSION 0x11 @@ -2069,4 +2073,8 @@ int fdt_overlay_apply(void *fdt, void *fdto); const char *fdt_strerror(int errval); +#ifdef __cplusplus +} +#endif + #endif /* LIBFDT_H */ diff --git a/scripts/dtc/treesource.c b/scripts/dtc/treesource.c index c9d980c8abfc..061ba8c9c5e8 100644 --- a/scripts/dtc/treesource.c +++ b/scripts/dtc/treesource.c @@ -110,13 +110,13 @@ static void write_propval_int(FILE *f, const char *p, size_t len, size_t width) fprintf(f, "%02"PRIx8, *(const uint8_t*)p); break; case 2: - fprintf(f, "0x%02"PRIx16, fdt16_to_cpu(*(const fdt16_t*)p)); + fprintf(f, "0x%02"PRIx16, dtb_ld16(p)); break; case 4: - fprintf(f, "0x%02"PRIx32, fdt32_to_cpu(*(const fdt32_t*)p)); + fprintf(f, "0x%02"PRIx32, dtb_ld32(p)); break; case 8: - fprintf(f, "0x%02"PRIx64, fdt64_to_cpu(*(const fdt64_t*)p)); + fprintf(f, "0x%02"PRIx64, dtb_ld64(p)); break; } if (p + width < end) @@ -183,7 +183,7 @@ static enum markertype guess_value_type(struct property *prop) nnotcelllbl++; } - if ((p[len-1] == '\0') && (nnotstring == 0) && (nnul < (len-nnul)) + if ((p[len-1] == '\0') && (nnotstring == 0) && (nnul <= (len-nnul)) && (nnotstringlbl == 0)) { return TYPE_STRING; } else if (((len % sizeof(cell_t)) == 0) && (nnotcelllbl == 0)) { diff --git a/scripts/dtc/version_gen.h b/scripts/dtc/version_gen.h index 61dd7112d6e4..0714799446f8 100644 --- a/scripts/dtc/version_gen.h +++ b/scripts/dtc/version_gen.h @@ -1 +1 @@ -#define DTC_VERSION "DTC 1.6.0-g87a656ae" +#define DTC_VERSION "DTC 1.6.0-g9d7888cb" diff --git a/scripts/dtc/yamltree.c b/scripts/dtc/yamltree.c index 5b6ea8ea862f..4e93c12dc658 100644 --- a/scripts/dtc/yamltree.c +++ b/scripts/dtc/yamltree.c @@ -59,10 +59,10 @@ static void yaml_propval_int(yaml_emitter_t *emitter, struct marker *markers, ch sprintf(buf, "0x%"PRIx8, *(uint8_t*)(data + off)); break; case 2: - sprintf(buf, "0x%"PRIx16, fdt16_to_cpu(*(fdt16_t*)(data + off))); + sprintf(buf, "0x%"PRIx16, dtb_ld16(data + off)); break; case 4: - sprintf(buf, "0x%"PRIx32, fdt32_to_cpu(*(fdt32_t*)(data + off))); + sprintf(buf, "0x%"PRIx32, dtb_ld32(data + off)); m = markers; is_phandle = false; for_each_marker_of_type(m, REF_PHANDLE) { @@ -73,7 +73,7 @@ static void yaml_propval_int(yaml_emitter_t *emitter, struct marker *markers, ch } break; case 8: - sprintf(buf, "0x%"PRIx64, fdt64_to_cpu(*(fdt64_t*)(data + off))); + sprintf(buf, "0x%"PRIx64, dtb_ld64(data + off)); break; } From 0fb24d1e5a6cf3b7ca0df325fbfb10895df41bec Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 23 Jun 2020 20:32:42 +0900 Subject: [PATCH 599/618] dt-bindings: bus: uniphier-system-bus: fix warning in example Since commit e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema"), the schema for "ns16550a" is checked. 'make dt_binding_check' emits the following warning: uart@5,00200000: $nodename:0: 'uart@5,00200000' does not match '^serial(@[0-9a-f,]+)*$' Rename the node to follow the pattern defined in Documentation/devicetree/bindings/serial/serial.yaml While I was here, I removed leading zeros from unit names. Signed-off-by: Masahiro Yamada Link: https://lore.kernel.org/r/20200623113242.779241-1-yamada.masahiro@socionext.com Signed-off-by: Rob Herring --- .../bindings/bus/socionext,uniphier-system-bus.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml index c4c9119e4a20..a0c6c5d2b70f 100644 --- a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml +++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml @@ -80,14 +80,14 @@ examples: ranges = <1 0x00000000 0x42000000 0x02000000>, <5 0x00000000 0x46000000 0x01000000>; - ethernet@1,01f00000 { + ethernet@1,1f00000 { compatible = "smsc,lan9115"; reg = <1 0x01f00000 0x1000>; interrupts = <0 48 4>; phy-mode = "mii"; }; - uart@5,00200000 { + serial@5,200000 { compatible = "ns16550a"; reg = <5 0x00200000 0x20>; interrupts = <0 49 4>; From 35b9c0fdb9f666628ecda02b1fc44306933a2d97 Mon Sep 17 00:00:00 2001 From: Kangmin Park Date: Thu, 25 Jun 2020 22:51:58 +0900 Subject: [PATCH 600/618] dt-bindings: mailbox: zynqmp_ipi: fix unit address Fix unit address to match the first address specified in the reg property of the node in example. Signed-off-by: Kangmin Park Link: https://lore.kernel.org/r/20200625135158.5861-1-l4stpr0gr4m@gmail.com Signed-off-by: Rob Herring --- .../devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt index 4438432bfe9b..ad76edccf881 100644 --- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt +++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt @@ -87,7 +87,7 @@ Example: ranges; /* APU<->RPU0 IPI mailbox controller */ - ipi_mailbox_rpu0: mailbox@ff90400 { + ipi_mailbox_rpu0: mailbox@ff990400 { reg = <0xff990400 0x20>, <0xff990420 0x20>, <0xff990080 0x20>, From fa714cf58c7c09a454ff9fda2ee8318591128eb6 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 26 Jun 2020 02:04:31 +0900 Subject: [PATCH 601/618] dt-bindings: fix error in 'make clean' after 'make dt_binding_check' We are having more and more schema files. Commit 8b6b80218b01 ("dt-bindings: Fix command line length limit calling dt-mk-schema") fixed the 'Argument list too long' error of the schema checks, but the same error happens while cleaning too. 'make clean' after 'make dt_binding_check' fails as follows: $ make dt_binding_check [ snip ] $ make clean make[2]: execvp: /bin/sh: Argument list too long make[2]: *** [scripts/Makefile.clean:52: __clean] Error 127 make[1]: *** [scripts/Makefile.clean:66: Documentation/devicetree/bindings] Error 2 make: *** [Makefile:1763: _clean_Documentation] Error 2 'make dt_binding_check' generates so many .example.dts, .dt.yaml files, which are passed to the 'rm' command when you run 'make clean'. I added a small hack to use the 'find' command to clean up most of the build artifacts before they are processed by scripts/Makefile.clean Signed-off-by: Masahiro Yamada Link: https://lore.kernel.org/r/20200625170434.635114-2-masahiroy@kernel.org Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/Makefile | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 0de90e8b4db8..89976970160e 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -54,3 +54,8 @@ $(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) check_dtschema_version FORCE $(call if_changed,mk_schema) extra-y += processed-schema.yaml + +# Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of +# build artifacts here before they are processed by scripts/Makefile.clean +clean-files = $(shell find $(obj) \( -name '*.example.dts' -o \ + -name '*.example.dt.yaml' \) -delete 2>/dev/null) From ce810eeb6540f1210fc78eb430d447b5b93337ab Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 26 Jun 2020 02:04:32 +0900 Subject: [PATCH 602/618] dt-bindings: do not build processed-schema.yaml for 'make dt_binding_check' Currently, processed-schema.yaml is always built, but it is actually used only for 'make dtbs_check'. 'make dt_binding_check' uses processed-schema-example.yaml instead. Build processed-schema.yaml only for 'make dtbs_check'. Signed-off-by: Masahiro Yamada Link: https://lore.kernel.org/r/20200625170434.635114-3-masahiroy@kernel.org Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 89976970160e..8190ecf69203 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -53,7 +53,7 @@ $(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := $(DT_MK_SCHEMA_USERONLY_FLAG $(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) check_dtschema_version FORCE $(call if_changed,mk_schema) -extra-y += processed-schema.yaml +extra-$(CHECK_DTBS) += processed-schema.yaml # Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of # build artifacts here before they are processed by scripts/Makefile.clean From dee9c0b57594834fdd65dc476ea2890592bcf35c Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 26 Jun 2020 02:04:33 +0900 Subject: [PATCH 603/618] dt-bindings: copy process-schema-examples.yaml to process-schema.yaml There are two processed schema files: - processed-schema-examples.yaml Used for 'make dt_binding_check'. This is always a full schema. - processed-schema.yaml Used for 'make dtbs_check'. This may be a full schema, or a smaller subset if DT_SCHEMA_FILES is given by a user. If DT_SCHEMA_FILES is not specified, they are the same. You can copy the former to the latter instead of running dt-mk-schema twice. This saves the cpu time a lot when you do 'make dt_binding_check dtbs_check' because building the full schema takes a couple of seconds. If DT_SCHEMA_FILES is specified, processed-schema.yaml is generated based on the specified yaml files. Signed-off-by: Masahiro Yamada Link: https://lore.kernel.org/r/20200625170434.635114-4-masahiroy@kernel.org Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/Makefile | 28 +++++++++++++++------- scripts/Makefile.lib | 3 +++ 2 files changed, 23 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 8190ecf69203..91c4d00e96d3 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -2,7 +2,6 @@ DT_DOC_CHECKER ?= dt-doc-validate DT_EXTRACT_EX ?= dt-extract-example DT_MK_SCHEMA ?= dt-mk-schema -DT_MK_SCHEMA_USERONLY_FLAG := $(if $(DT_SCHEMA_FILES), -u) DT_SCHEMA_MIN_VERSION = 2020.5 @@ -35,12 +34,6 @@ quiet_cmd_mk_schema = SCHEMA $@ DT_DOCS = $(shell $(find_cmd) | sed -e 's|^$(srctree)/||') -DT_SCHEMA_FILES ?= $(DT_DOCS) - -extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES)) -extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES)) -extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml - override DTC_FLAGS := \ -Wno-avoid_unnecessary_addr_size \ -Wno-graph_child_address \ @@ -49,10 +42,29 @@ override DTC_FLAGS := \ $(obj)/processed-schema-examples.yaml: $(DT_DOCS) check_dtschema_version FORCE $(call if_changed,mk_schema) -$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := $(DT_MK_SCHEMA_USERONLY_FLAG) +ifeq ($(DT_SCHEMA_FILES),) + +# Unless DT_SCHEMA_FILES is specified, use the full schema for dtbs_check too. +# Just copy processed-schema-examples.yaml + +$(obj)/processed-schema.yaml: $(obj)/processed-schema-examples.yaml FORCE + $(call if_changed,copy) + +DT_SCHEMA_FILES = $(DT_DOCS) + +else + +# If DT_SCHEMA_FILES is specified, use it for processed-schema.yaml + +$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := -u $(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) check_dtschema_version FORCE $(call if_changed,mk_schema) +endif + +extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES)) +extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES)) +extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml extra-$(CHECK_DTBS) += processed-schema.yaml # Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index e6411b37ecf6..916b2f7f7098 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -212,6 +212,9 @@ $(foreach m, $(notdir $1), \ $(addprefix $(obj)/, $(foreach s, $3, $($(m:%$(strip $2)=%$(s))))))) endef +quiet_cmd_copy = COPY $@ + cmd_copy = cp $< $@ + # Shipped files # =========================================================================== From dd075b664c491d7dd86c4587d11c56bd98bb28be Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 29 Jun 2020 18:40:27 -0300 Subject: [PATCH 604/618] dt-bindings: usb: aspeed: Remove the leading zeroes Remove the leading zeroes to fix the following warning seen with 'make dt_binding_check': Documentation/devicetree/bindings/usb/aspeed,usb-vhub.example.dts:37.33-42.23: Warning (unit_address_format): /example-0/usb-vhub@1e6a0000/vhub-strings/string@0409: unit name should not have leading 0s Reviewed-by: Tao Ren Signed-off-by: Fabio Estevam Link: https://lore.kernel.org/r/20200629214027.16768-1-festevam@gmail.com Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml index e4e83d3971ac..8b019ac05bbe 100644 --- a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml @@ -127,8 +127,8 @@ examples: #address-cells = <1>; #size-cells = <0>; - string@0409 { - reg = <0x0409>; + string@409 { + reg = <0x409>; manufacturer = "ASPEED"; product = "USB Virtual Hub"; serial-number = "0000"; From 0b3f3ad3fe19dc56ec6689032cbf76d033f3e37d Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 29 Jun 2020 18:55:00 -0300 Subject: [PATCH 605/618] dt-bindings: display: arm: versatile: Pass the sysreg unit name Pass the sysreg unit name to fix the following warning seen with 'make dt_binding_check': Warning (unit_address_vs_reg): /example-0/sysreg: node has a reg or ranges property, but no unit name Signed-off-by: Fabio Estevam Link: https://lore.kernel.org/r/20200629215500.18037-1-festevam@gmail.com Signed-off-by: Rob Herring --- .../bindings/display/panel/arm,versatile-tft-panel.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml index 41fd5713c156..be69e0cc50fc 100644 --- a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml +++ b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml @@ -33,7 +33,7 @@ additionalProperties: false examples: - | - sysreg { + sysreg@0 { compatible = "arm,versatile-sysreg", "syscon", "simple-mfd"; reg = <0x00000 0x1000>; From 34b9610609baf07048b127a9bdd33829ff0edd4b Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 30 Jun 2020 09:18:04 -0300 Subject: [PATCH 606/618] dt-bindings: thermal: Remove soc unit address Remove the soc unit address to fix the following warnings seen with 'make dt_binding_check': Documentation/devicetree/bindings/thermal/thermal-sensor.example.dts:22.20-49.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/thermal/thermal-zones.example.dts:23.20-50.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property Signed-off-by: Fabio Estevam Link: https://lore.kernel.org/r/20200630121804.27887-1-festevam@gmail.com [robh: also fix thermal-zones.yaml example] Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/thermal/thermal-sensor.yaml | 2 +- Documentation/devicetree/bindings/thermal/thermal-zones.yaml | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml index fcd25a0af38c..727d04550324 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml @@ -41,7 +41,7 @@ examples: #include // Example 1: SDM845 TSENS - soc: soc@0 { + soc: soc { #address-cells = <2>; #size-cells = <2>; diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index b8515d3eeaa2..3ec9cc87ec50 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -224,7 +224,7 @@ examples: #include // Example 1: SDM845 TSENS - soc: soc@0 { + soc { #address-cells = <2>; #size-cells = <2>; From 341404415e76501543b4255506d4d9da09493c3a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 30 Jun 2020 09:25:27 -0300 Subject: [PATCH 607/618] dt-bindings: thermal: k3: Fix the reg property Adjust the reg property to fix the following warning seen with 'make dt_binding_check': Documentation/devicetree/bindings/thermal/ti,am654-thermal.example.dt.yaml: example-0: thermal@42050000:reg:0: [0, 1107623936, 0, 604] is too long Signed-off-by: Fabio Estevam Link: https://lore.kernel.org/r/20200630122527.28640-1-festevam@gmail.com Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml index 25b9209c2e5d..ea14de80ec75 100644 --- a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml @@ -35,7 +35,7 @@ examples: #include vtm: thermal@42050000 { compatible = "ti,am654-vtm"; - reg = <0x0 0x42050000 0x0 0x25c>; + reg = <0x42050000 0x25c>; power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; #thermal-sensor-cells = <1>; }; From e91b48162332480f5840902268108bb7fb7a44c7 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Tue, 30 Jun 2020 17:32:54 +0200 Subject: [PATCH 608/618] task_work: teach task_work_add() to do signal_wake_up() So that the target task will exit the wait_event_interruptible-like loop and call task_work_run() asap. The patch turns "bool notify" into 0,TWA_RESUME,TWA_SIGNAL enum, the new TWA_SIGNAL flag implies signal_wake_up(). However, it needs to avoid the race with recalc_sigpending(), so the patch also adds the new JOBCTL_TASK_WORK bit included in JOBCTL_PENDING_MASK. TODO: once this patch is merged we need to change all current users of task_work_add(notify = true) to use TWA_RESUME. Cc: stable@vger.kernel.org # v5.7 Acked-by: Peter Zijlstra (Intel) Signed-off-by: Oleg Nesterov Signed-off-by: Jens Axboe --- include/linux/sched/jobctl.h | 4 +++- include/linux/task_work.h | 5 ++++- kernel/signal.c | 10 +++++++--- kernel/task_work.c | 16 ++++++++++++++-- 4 files changed, 28 insertions(+), 7 deletions(-) diff --git a/include/linux/sched/jobctl.h b/include/linux/sched/jobctl.h index fa067de9f1a9..d2b4204ba4d3 100644 --- a/include/linux/sched/jobctl.h +++ b/include/linux/sched/jobctl.h @@ -19,6 +19,7 @@ struct task_struct; #define JOBCTL_TRAPPING_BIT 21 /* switching to TRACED */ #define JOBCTL_LISTENING_BIT 22 /* ptracer is listening for events */ #define JOBCTL_TRAP_FREEZE_BIT 23 /* trap for cgroup freezer */ +#define JOBCTL_TASK_WORK_BIT 24 /* set by TWA_SIGNAL */ #define JOBCTL_STOP_DEQUEUED (1UL << JOBCTL_STOP_DEQUEUED_BIT) #define JOBCTL_STOP_PENDING (1UL << JOBCTL_STOP_PENDING_BIT) @@ -28,9 +29,10 @@ struct task_struct; #define JOBCTL_TRAPPING (1UL << JOBCTL_TRAPPING_BIT) #define JOBCTL_LISTENING (1UL << JOBCTL_LISTENING_BIT) #define JOBCTL_TRAP_FREEZE (1UL << JOBCTL_TRAP_FREEZE_BIT) +#define JOBCTL_TASK_WORK (1UL << JOBCTL_TASK_WORK_BIT) #define JOBCTL_TRAP_MASK (JOBCTL_TRAP_STOP | JOBCTL_TRAP_NOTIFY) -#define JOBCTL_PENDING_MASK (JOBCTL_STOP_PENDING | JOBCTL_TRAP_MASK) +#define JOBCTL_PENDING_MASK (JOBCTL_STOP_PENDING | JOBCTL_TRAP_MASK | JOBCTL_TASK_WORK) extern bool task_set_jobctl_pending(struct task_struct *task, unsigned long mask); extern void task_clear_jobctl_trapping(struct task_struct *task); diff --git a/include/linux/task_work.h b/include/linux/task_work.h index bd9a6a91c097..0fb93aafa478 100644 --- a/include/linux/task_work.h +++ b/include/linux/task_work.h @@ -13,7 +13,10 @@ init_task_work(struct callback_head *twork, task_work_func_t func) twork->func = func; } -int task_work_add(struct task_struct *task, struct callback_head *twork, bool); +#define TWA_RESUME 1 +#define TWA_SIGNAL 2 +int task_work_add(struct task_struct *task, struct callback_head *twork, int); + struct callback_head *task_work_cancel(struct task_struct *, task_work_func_t); void task_work_run(void); diff --git a/kernel/signal.c b/kernel/signal.c index 5ca48cc5da76..ee22ec78fd6d 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -2529,9 +2529,6 @@ bool get_signal(struct ksignal *ksig) struct signal_struct *signal = current->signal; int signr; - if (unlikely(current->task_works)) - task_work_run(); - if (unlikely(uprobe_deny_signal())) return false; @@ -2544,6 +2541,13 @@ bool get_signal(struct ksignal *ksig) relock: spin_lock_irq(&sighand->siglock); + current->jobctl &= ~JOBCTL_TASK_WORK; + if (unlikely(current->task_works)) { + spin_unlock_irq(&sighand->siglock); + task_work_run(); + goto relock; + } + /* * Every stopped thread goes here after wakeup. Check to see if * we should notify the parent, prepare_signal(SIGCONT) encodes diff --git a/kernel/task_work.c b/kernel/task_work.c index 825f28259a19..5c0848ca1287 100644 --- a/kernel/task_work.c +++ b/kernel/task_work.c @@ -25,9 +25,10 @@ static struct callback_head work_exited; /* all we need is ->next == NULL */ * 0 if succeeds or -ESRCH. */ int -task_work_add(struct task_struct *task, struct callback_head *work, bool notify) +task_work_add(struct task_struct *task, struct callback_head *work, int notify) { struct callback_head *head; + unsigned long flags; do { head = READ_ONCE(task->task_works); @@ -36,8 +37,19 @@ task_work_add(struct task_struct *task, struct callback_head *work, bool notify) work->next = head; } while (cmpxchg(&task->task_works, head, work) != head); - if (notify) + switch (notify) { + case TWA_RESUME: set_notify_resume(task); + break; + case TWA_SIGNAL: + if (lock_task_sighand(task, &flags)) { + task->jobctl |= JOBCTL_TASK_WORK; + signal_wake_up(task, 0); + unlock_task_sighand(task, &flags); + } + break; + } + return 0; } From ce593a6c480a22acba08795be313c0c6d49dd35d Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 30 Jun 2020 12:39:05 -0600 Subject: [PATCH 609/618] io_uring: use signal based task_work running Since 5.7, we've been using task_work to trigger async running of requests in the context of the original task. This generally works great, but there's a case where if the task is currently blocked in the kernel waiting on a condition to become true, it won't process task_work. Even though the task is woken, it just checks whatever condition it's waiting on, and goes back to sleep if it's still false. This is a problem if that very condition only becomes true when that task_work is run. An example of that is the task registering an eventfd with io_uring, and it's now blocked waiting on an eventfd read. That read could depend on a completion event, and that completion event won't get trigged until task_work has been run. Use the TWA_SIGNAL notification for task_work, so that we ensure that the task always runs the work when queued. Cc: stable@vger.kernel.org # v5.7 Signed-off-by: Jens Axboe --- fs/io_uring.c | 32 ++++++++++++++++++++++++-------- 1 file changed, 24 insertions(+), 8 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index e507737f044e..700644a016a7 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -4072,6 +4072,21 @@ struct io_poll_table { int error; }; +static int io_req_task_work_add(struct io_kiocb *req, struct callback_head *cb, + int notify) +{ + struct task_struct *tsk = req->task; + int ret; + + if (req->ctx->flags & IORING_SETUP_SQPOLL) + notify = 0; + + ret = task_work_add(tsk, cb, notify); + if (!ret) + wake_up_process(tsk); + return ret; +} + static int __io_async_wake(struct io_kiocb *req, struct io_poll_iocb *poll, __poll_t mask, task_work_func_t func) { @@ -4095,13 +4110,13 @@ static int __io_async_wake(struct io_kiocb *req, struct io_poll_iocb *poll, * of executing it. We can't safely execute it anyway, as we may not * have the needed state needed for it anyway. */ - ret = task_work_add(tsk, &req->task_work, true); + ret = io_req_task_work_add(req, &req->task_work, TWA_SIGNAL); if (unlikely(ret)) { WRITE_ONCE(poll->canceled, true); tsk = io_wq_get_task(req->ctx->io_wq); - task_work_add(tsk, &req->task_work, true); + task_work_add(tsk, &req->task_work, 0); + wake_up_process(tsk); } - wake_up_process(tsk); return 1; } @@ -6182,19 +6197,20 @@ static int io_cqring_wait(struct io_ring_ctx *ctx, int min_events, do { prepare_to_wait_exclusive(&ctx->wait, &iowq.wq, TASK_INTERRUPTIBLE); + /* make sure we run task_work before checking for signals */ if (current->task_works) task_work_run(); + if (signal_pending(current)) { + ret = -ERESTARTSYS; + break; + } if (io_should_wake(&iowq, false)) break; schedule(); - if (signal_pending(current)) { - ret = -EINTR; - break; - } } while (1); finish_wait(&ctx->wait, &iowq.wq); - restore_saved_sigmask_unless(ret == -EINTR); + restore_saved_sigmask_unless(ret == -ERESTARTSYS); return READ_ONCE(rings->cq.head) == READ_ONCE(rings->cq.tail) ? ret : 0; } From e7eea44eefbdd5f0345a0a8b80a3ca1c21030d06 Mon Sep 17 00:00:00 2001 From: Hou Tao Date: Mon, 15 Jun 2020 12:14:59 +0800 Subject: [PATCH 610/618] virtio-blk: free vblk-vqs in error path of virtblk_probe() Else there will be memory leak if alloc_disk() fails. Fixes: 6a27b656fc02 ("block: virtio-blk: support multi virt queues per virtio-blk device") Signed-off-by: Hou Tao Reviewed-by: Stefano Garzarella Reviewed-by: Ming Lei Signed-off-by: Jens Axboe --- drivers/block/virtio_blk.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 9d21bf0f155e..980df853ee49 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -878,6 +878,7 @@ static int virtblk_probe(struct virtio_device *vdev) put_disk(vblk->disk); out_free_vq: vdev->config->del_vqs(vdev); + kfree(vblk->vqs); out_free_vblk: kfree(vblk); out_free_index: From 0115e6c98c22f3fc7ff7da2a41480483abe95b37 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 30 Jun 2020 21:53:46 -0300 Subject: [PATCH 611/618] dt-bindings: clock: imx: Fix e-mail address The freescale.com domain is gone for quite some time. Use the nxp.com domain instead. Signed-off-by: Fabio Estevam Link: https://lore.kernel.org/r/20200701005346.1008-1-festevam@gmail.com Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/clock/imx27-clock.yaml | 2 +- Documentation/devicetree/bindings/clock/imx31-clock.yaml | 2 +- Documentation/devicetree/bindings/clock/imx5-clock.yaml | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml index b5f3ed084ea0..a75365453dbc 100644 --- a/Documentation/devicetree/bindings/clock/imx27-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Clock bindings for Freescale i.MX27 maintainers: - - Fabio Estevam + - Fabio Estevam description: | The clock consumer should specify the desired clock by having the clock diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml index 1b6f75d3928a..a25a374b3b2a 100644 --- a/Documentation/devicetree/bindings/clock/imx31-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Clock bindings for Freescale i.MX31 maintainers: - - Fabio Estevam + - Fabio Estevam description: | The clock consumer should specify the desired clock by having the clock diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml index f5c2b3d7a910..4d9e7c73dce9 100644 --- a/Documentation/devicetree/bindings/clock/imx5-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Clock bindings for Freescale i.MX5 maintainers: - - Fabio Estevam + - Fabio Estevam description: | The clock consumer should specify the desired clock by having the clock From 7862840219058436b80029a0263fd1ef065fb1b3 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 28 May 2020 11:10:57 -0700 Subject: [PATCH 612/618] tpm: Fix TIS locality timeout problems It has been reported that some TIS based TPMs are giving unexpected errors when using the O_NONBLOCK path of the TPM device. The problem is that some TPMs don't like it when you get and then relinquish a locality (as the tpm_try_get_ops()/tpm_put_ops() pair does) without sending a command. This currently happens all the time in the O_NONBLOCK write path. Fix this by moving the tpm_try_get_ops() further down the code to after the O_NONBLOCK determination is made. This is safe because the priv->buffer_mutex still protects the priv state being modified. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206275 Fixes: d23d12484307 ("tpm: fix invalid locking in NONBLOCKING mode") Reported-by: Mario Limonciello Tested-by: Alex Guzman Cc: stable@vger.kernel.org Reviewed-by: Jerry Snitselaar Signed-off-by: James Bottomley Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm-dev-common.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/char/tpm/tpm-dev-common.c b/drivers/char/tpm/tpm-dev-common.c index 87f449340202..1784530b8387 100644 --- a/drivers/char/tpm/tpm-dev-common.c +++ b/drivers/char/tpm/tpm-dev-common.c @@ -189,15 +189,6 @@ ssize_t tpm_common_write(struct file *file, const char __user *buf, goto out; } - /* atomic tpm command send and result receive. We only hold the ops - * lock during this period so that the tpm can be unregistered even if - * the char dev is held open. - */ - if (tpm_try_get_ops(priv->chip)) { - ret = -EPIPE; - goto out; - } - priv->response_length = 0; priv->response_read = false; *off = 0; @@ -211,11 +202,19 @@ ssize_t tpm_common_write(struct file *file, const char __user *buf, if (file->f_flags & O_NONBLOCK) { priv->command_enqueued = true; queue_work(tpm_dev_wq, &priv->async_work); - tpm_put_ops(priv->chip); mutex_unlock(&priv->buffer_mutex); return size; } + /* atomic tpm command send and result receive. We only hold the ops + * lock during this period so that the tpm can be unregistered even if + * the char dev is held open. + */ + if (tpm_try_get_ops(priv->chip)) { + ret = -EPIPE; + goto out; + } + ret = tpm_dev_transmit(priv->chip, priv->space, priv->data_buffer, sizeof(priv->data_buffer)); tpm_put_ops(priv->chip); From eac9347d932b96c09f089ac0673ebe588983e59b Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Thu, 28 May 2020 15:19:30 -0700 Subject: [PATCH 613/618] tpm_tis_spi: Don't send anything during flow control During flow control we are just reading from the TPM, yet our spi_xfer has the tx_buf and rx_buf both non-NULL which means we're requesting a full duplex transfer. SPI is always somewhat of a full duplex protocol anyway and in theory the other side shouldn't really be looking at what we're sending it during flow control, but it's still a bit ugly to be sending some "random" data when we shouldn't. The default tpm_tis_spi_flow_control() tries to address this by setting 'phy->iobuf[0] = 0'. This partially avoids the problem of sending "random" data, but since our tx_buf and rx_buf both point to the same place I believe there is the potential of us sending the TPM's previous byte back to it if we hit the retry loop. Another flow control implementation, cr50_spi_flow_control(), doesn't address this at all. Let's clean this up and just make the tx_buf NULL before we call flow_control(). Not only does this ensure that we're not sending any "random" bytes but it also possibly could make the SPI controller behave in a slightly more optimal way. NOTE: no actual observed problems are fixed by this patch--it's was just made based on code inspection. Signed-off-by: Douglas Anderson Reviewed-by: Paul Menzel Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm_tis_spi_main.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/char/tpm/tpm_tis_spi_main.c b/drivers/char/tpm/tpm_tis_spi_main.c index d96755935529..8d2c581a93c6 100644 --- a/drivers/char/tpm/tpm_tis_spi_main.c +++ b/drivers/char/tpm/tpm_tis_spi_main.c @@ -53,8 +53,6 @@ static int tpm_tis_spi_flow_control(struct tpm_tis_spi_phy *phy, if ((phy->iobuf[3] & 0x01) == 0) { // handle SPI wait states - phy->iobuf[0] = 0; - for (i = 0; i < TPM_RETRY; i++) { spi_xfer->len = 1; spi_message_init(&m); @@ -104,6 +102,8 @@ int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len, if (ret < 0) goto exit; + /* Flow control transfers are receive only */ + spi_xfer.tx_buf = NULL; ret = phy->flow_control(phy, &spi_xfer); if (ret < 0) goto exit; @@ -113,9 +113,8 @@ int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len, spi_xfer.delay.value = 5; spi_xfer.delay.unit = SPI_DELAY_UNIT_USECS; - if (in) { - spi_xfer.tx_buf = NULL; - } else if (out) { + if (out) { + spi_xfer.tx_buf = phy->iobuf; spi_xfer.rx_buf = NULL; memcpy(phy->iobuf, out, transfer_len); out += transfer_len; From ccf6fb858e17a8f8a914a1c6444d277cfedfeae6 Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Sat, 13 Jun 2020 17:18:33 +0300 Subject: [PATCH 614/618] tpm_tis: extra chip->ops check on error path in tpm_tis_core_init Found by smatch: drivers/char/tpm/tpm_tis_core.c:1088 tpm_tis_core_init() warn: variable dereferenced before check 'chip->ops' (see line 979) 'chip->ops' is assigned in the beginning of function in tpmm_chip_alloc->tpm_chip_alloc and is used before first possible goto to error path. Signed-off-by: Vasily Averin Reviewed-by: Jerry Snitselaar Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm_tis_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c index 2435216bd10a..65ab1b027949 100644 --- a/drivers/char/tpm/tpm_tis_core.c +++ b/drivers/char/tpm/tpm_tis_core.c @@ -1085,7 +1085,7 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq, return 0; out_err: - if ((chip->ops != NULL) && (chip->ops->clk_enable != NULL)) + if (chip->ops->clk_enable != NULL) chip->ops->clk_enable(chip, false); tpm_tis_remove(chip); From 82efeb161c090072ab493ab8c8f8a551727f586e Mon Sep 17 00:00:00 2001 From: Binbin Zhou Date: Wed, 17 Jun 2020 09:00:38 +0800 Subject: [PATCH 615/618] tpm/st33zp24: fix spelling mistake "drescription" -> "description" Trivial fix, the spelling of "drescription" is incorrect in function comment. Fix this. Signed-off-by: Binbin Zhou Acked-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/st33zp24/i2c.c | 2 +- drivers/char/tpm/st33zp24/spi.c | 4 ++-- drivers/char/tpm/st33zp24/st33zp24.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/char/tpm/st33zp24/i2c.c b/drivers/char/tpm/st33zp24/i2c.c index 35333b65acd1..7c617edff4ca 100644 --- a/drivers/char/tpm/st33zp24/i2c.c +++ b/drivers/char/tpm/st33zp24/i2c.c @@ -210,7 +210,7 @@ static int st33zp24_i2c_request_resources(struct i2c_client *client) /* * st33zp24_i2c_probe initialize the TPM device - * @param: client, the i2c_client drescription (TPM I2C description). + * @param: client, the i2c_client description (TPM I2C description). * @param: id, the i2c_device_id struct. * @return: 0 in case of success. * -1 in other case. diff --git a/drivers/char/tpm/st33zp24/spi.c b/drivers/char/tpm/st33zp24/spi.c index 26e09de50f1e..a75dafd39445 100644 --- a/drivers/char/tpm/st33zp24/spi.c +++ b/drivers/char/tpm/st33zp24/spi.c @@ -329,7 +329,7 @@ static int st33zp24_spi_request_resources(struct spi_device *dev) /* * st33zp24_spi_probe initialize the TPM device - * @param: dev, the spi_device drescription (TPM SPI description). + * @param: dev, the spi_device description (TPM SPI description). * @return: 0 in case of success. * or a negative value describing the error. */ @@ -378,7 +378,7 @@ static int st33zp24_spi_probe(struct spi_device *dev) /* * st33zp24_spi_remove remove the TPM device - * @param: client, the spi_device drescription (TPM SPI description). + * @param: client, the spi_device description (TPM SPI description). * @return: 0 in case of success. */ static int st33zp24_spi_remove(struct spi_device *dev) diff --git a/drivers/char/tpm/st33zp24/st33zp24.c b/drivers/char/tpm/st33zp24/st33zp24.c index 37bb13f516be..4ec10ab5e576 100644 --- a/drivers/char/tpm/st33zp24/st33zp24.c +++ b/drivers/char/tpm/st33zp24/st33zp24.c @@ -502,7 +502,7 @@ static const struct tpm_class_ops st33zp24_tpm = { /* * st33zp24_probe initialize the TPM device - * @param: client, the i2c_client drescription (TPM I2C description). + * @param: client, the i2c_client description (TPM I2C description). * @param: id, the i2c_device_id struct. * @return: 0 in case of success. * -1 in other case. From 72d0556dca39f45eca6c4c085e9eb0fc70aec025 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Fri, 19 Jun 2020 13:30:40 +1000 Subject: [PATCH 616/618] tpm: ibmvtpm: Wait for ready buffer before probing for TPM2 attributes The tpm2_get_cc_attrs_tbl() call will result in TPM commands being issued, which will need the use of the internal command/response buffer. But, we're issuing this *before* we've waited to make sure that buffer is allocated. This can result in intermittent failures to probe if the hypervisor / TPM implementation doesn't respond quickly enough. I find it fails almost every time with an 8 vcpu guest under KVM with software emulated TPM. To fix it, just move the tpm2_get_cc_attrs_tlb() call after the existing code to wait for initialization, which will ensure the buffer is allocated. Fixes: 18b3670d79ae9 ("tpm: ibmvtpm: Add support for TPM2") Signed-off-by: David Gibson Reviewed-by: Jerry Snitselaar Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm_ibmvtpm.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/char/tpm/tpm_ibmvtpm.c b/drivers/char/tpm/tpm_ibmvtpm.c index 09fe45246b8c..994385bf37c0 100644 --- a/drivers/char/tpm/tpm_ibmvtpm.c +++ b/drivers/char/tpm/tpm_ibmvtpm.c @@ -683,13 +683,6 @@ static int tpm_ibmvtpm_probe(struct vio_dev *vio_dev, if (rc) goto init_irq_cleanup; - if (!strcmp(id->compat, "IBM,vtpm20")) { - chip->flags |= TPM_CHIP_FLAG_TPM2; - rc = tpm2_get_cc_attrs_tbl(chip); - if (rc) - goto init_irq_cleanup; - } - if (!wait_event_timeout(ibmvtpm->crq_queue.wq, ibmvtpm->rtce_buf != NULL, HZ)) { @@ -697,6 +690,13 @@ static int tpm_ibmvtpm_probe(struct vio_dev *vio_dev, goto init_irq_cleanup; } + if (!strcmp(id->compat, "IBM,vtpm20")) { + chip->flags |= TPM_CHIP_FLAG_TPM2; + rc = tpm2_get_cc_attrs_tbl(chip); + if (rc) + goto init_irq_cleanup; + } + return tpm_chip_register(chip); init_irq_cleanup: do { From 7187bf7f6297a8cfc74512a4493e06028626482d Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Fri, 19 Jun 2020 14:20:01 -0700 Subject: [PATCH 617/618] tpm_tis_spi: Prefer async probe On a Chromebook I'm working on I noticed a big (~1 second) delay during bootup where nothing was happening. Right around this big delay there were messages about the TPM: [ 2.311352] tpm_tis_spi spi0.0: TPM ready IRQ confirmed on attempt 2 [ 3.332790] tpm_tis_spi spi0.0: Cr50 firmware version: ... I put a few printouts in and saw that tpm_tis_spi_init() (specifically tpm_chip_register() in that function) was taking the lion's share of this time, though ~115 ms of the time was in cr50_print_fw_version(). Let's make a one-line change to prefer async probe for tpm_tis_spi. There's no reason we need to block other drivers from probing while we load. NOTES: * It's possible that other hardware runs through the init sequence faster than Cr50 and this isn't such a big problem for them. However, even if they are faster they are still doing _some_ transfers over a SPI bus so this should benefit everyone even if to a lesser extent. * It's possible that there are extra delays in the code that could be optimized out. I didn't dig since once I enabled async probe they no longer impacted me. Signed-off-by: Douglas Anderson Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm_tis_spi_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/char/tpm/tpm_tis_spi_main.c b/drivers/char/tpm/tpm_tis_spi_main.c index 8d2c581a93c6..3856f6ebcb34 100644 --- a/drivers/char/tpm/tpm_tis_spi_main.c +++ b/drivers/char/tpm/tpm_tis_spi_main.c @@ -287,6 +287,7 @@ static struct spi_driver tpm_tis_spi_driver = { .pm = &tpm_tis_pm, .of_match_table = of_match_ptr(of_tis_spi_match), .acpi_match_table = ACPI_PTR(acpi_tis_spi_match), + .probe_type = PROBE_PREFER_ASYNCHRONOUS, }, .probe = tpm_tis_spi_driver_probe, .remove = tpm_tis_spi_remove, From e918e570415ced9898a51109000a3f39a6e03be5 Mon Sep 17 00:00:00 2001 From: Jarkko Sakkinen Date: Thu, 25 Jun 2020 05:31:11 +0300 Subject: [PATCH 618/618] tpm_tis: Remove the HID IFX0102 Acer C720 running Linux v5.3 reports this in klog: tpm_tis: 1.2 TPM (device-id 0xB, rev-id 16) tpm tpm0: tpm_try_transmit: send(): error -5 tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts tpm_tis tpm_tis: Could not get TPM timeouts and durations tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) tpm tpm0: tpm_try_transmit: send(): error -5 tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts tpm_tis 00:08: Could not get TPM timeouts and durations ima: No TPM chip found, activating TPM-bypass! tpm_inf_pnp 00:08: Found TPM with ID IFX0102 % git --no-pager grep IFX0102 drivers/char/tpm drivers/char/tpm/tpm_infineon.c: {"IFX0102", 0}, drivers/char/tpm/tpm_tis.c: {"IFX0102", 0}, /* Infineon */ Obviously IFX0102 was added to the HID table for the TCG TIS driver by mistake. Fixes: 93e1b7d42e1e ("[PATCH] tpm: add HID module parameter") Link: https://bugzilla.kernel.org/show_bug.cgi?id=203877 Cc: stable@vger.kernel.org Cc: Kylene Jo Hall Reported-by: Ferry Toth: Reviewed-by: Jerry Snitselaar Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm_tis.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index e7df342a317d..c58ea10fc92f 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -238,7 +238,6 @@ static int tpm_tis_pnp_init(struct pnp_dev *pnp_dev, static struct pnp_device_id tpm_pnp_tbl[] = { {"PNP0C31", 0}, /* TPM */ {"ATM1200", 0}, /* Atmel */ - {"IFX0102", 0}, /* Infineon */ {"BCM0101", 0}, /* Broadcom */ {"BCM0102", 0}, /* Broadcom */ {"NSC1200", 0}, /* National */