diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index e1233aabda77..a3fd87b41444 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -365,7 +365,7 @@ struct scsi2map { static int cciss_scsi_add_entry(int ctlr, int hostno, - unsigned char *scsi3addr, int devtype, + struct cciss_scsi_dev_t *device, struct scsi2map *added, int *nadded) { /* assumes hba[ctlr]->scsi_ctlr->lock is held */ @@ -384,12 +384,12 @@ cciss_scsi_add_entry(int ctlr, int hostno, lun = 0; /* Is this device a non-zero lun of a multi-lun device */ /* byte 4 of the 8-byte LUN addr will contain the logical unit no. */ - if (scsi3addr[4] != 0) { + if (device->scsi3addr[4] != 0) { /* Search through our list and find the device which */ /* has the same 8 byte LUN address, excepting byte 4. */ /* Assign the same bus and target for this new LUN. */ /* Use the logical unit number from the firmware. */ - memcpy(addr1, scsi3addr, 8); + memcpy(addr1, device->scsi3addr, 8); addr1[4] = 0; for (i = 0; i < n; i++) { sd = &ccissscsi[ctlr].dev[i]; @@ -399,7 +399,7 @@ cciss_scsi_add_entry(int ctlr, int hostno, if (memcmp(addr1, addr2, 8) == 0) { bus = sd->bus; target = sd->target; - lun = scsi3addr[4]; + lun = device->scsi3addr[4]; break; } } @@ -420,8 +420,12 @@ cciss_scsi_add_entry(int ctlr, int hostno, added[*nadded].lun = sd->lun; (*nadded)++; - memcpy(&sd->scsi3addr[0], scsi3addr, 8); - sd->devtype = devtype; + memcpy(sd->scsi3addr, device->scsi3addr, 8); + memcpy(sd->vendor, device->vendor, sizeof(sd->vendor)); + memcpy(sd->revision, device->revision, sizeof(sd->revision)); + memcpy(sd->device_id, device->device_id, sizeof(sd->device_id)); + sd->devtype = device->devtype; + ccissscsi[ctlr].ndevices++; /* initially, (before registering with scsi layer) we don't @@ -487,6 +491,22 @@ static void fixup_botched_add(int ctlr, char *scsi3addr) CPQ_TAPE_UNLOCK(ctlr, flags); } +static int device_is_the_same(struct cciss_scsi_dev_t *dev1, + struct cciss_scsi_dev_t *dev2) +{ + return dev1->devtype == dev2->devtype && + memcmp(dev1->scsi3addr, dev2->scsi3addr, + sizeof(dev1->scsi3addr)) == 0 && + memcmp(dev1->device_id, dev2->device_id, + sizeof(dev1->device_id)) == 0 && + memcmp(dev1->vendor, dev2->vendor, + sizeof(dev1->vendor)) == 0 && + memcmp(dev1->model, dev2->model, + sizeof(dev1->model)) == 0 && + memcmp(dev1->revision, dev2->revision, + sizeof(dev1->revision)) == 0; +} + static int adjust_cciss_scsi_table(int ctlr, int hostno, struct cciss_scsi_dev_t sd[], int nsds) @@ -532,7 +552,7 @@ adjust_cciss_scsi_table(int ctlr, int hostno, for (j=0;jscsi3addr)) { - if (sd[j].devtype == csd->devtype) + if (device_is_the_same(&sd[j], csd)) found=2; else found=1; @@ -548,22 +568,26 @@ adjust_cciss_scsi_table(int ctlr, int hostno, cciss_scsi_remove_entry(ctlr, hostno, i, removed, &nremoved); /* remove ^^^, hence i not incremented */ - } - else if (found == 1) { /* device is different kind */ + } else if (found == 1) { /* device is different in some way */ changes++; - printk("cciss%d: device c%db%dt%dl%d type changed " - "(device type now %s).\n", - ctlr, hostno, csd->bus, csd->target, csd->lun, - scsi_device_type(csd->devtype)); + printk("cciss%d: device c%db%dt%dl%d has changed.\n", + ctlr, hostno, csd->bus, csd->target, csd->lun); cciss_scsi_remove_entry(ctlr, hostno, i, removed, &nremoved); /* remove ^^^, hence i not incremented */ - if (cciss_scsi_add_entry(ctlr, hostno, - &sd[j].scsi3addr[0], sd[j].devtype, + if (cciss_scsi_add_entry(ctlr, hostno, &sd[j], added, &nadded) != 0) /* we just removed one, so add can't fail. */ BUG(); csd->devtype = sd[j].devtype; + memcpy(csd->device_id, sd[j].device_id, + sizeof(csd->device_id)); + memcpy(csd->vendor, sd[j].vendor, + sizeof(csd->vendor)); + memcpy(csd->model, sd[j].model, + sizeof(csd->model)); + memcpy(csd->revision, sd[j].revision, + sizeof(csd->revision)); } else /* device is same as it ever was, */ i++; /* so just move along. */ } @@ -577,7 +601,7 @@ adjust_cciss_scsi_table(int ctlr, int hostno, csd = &ccissscsi[ctlr].dev[j]; if (SCSI3ADDR_EQ(sd[i].scsi3addr, csd->scsi3addr)) { - if (sd[i].devtype == csd->devtype) + if (device_is_the_same(&sd[i], csd)) found=2; /* found device */ else found=1; /* found a bug. */ @@ -586,16 +610,14 @@ adjust_cciss_scsi_table(int ctlr, int hostno, } if (!found) { changes++; - if (cciss_scsi_add_entry(ctlr, hostno, - - &sd[i].scsi3addr[0], sd[i].devtype, + if (cciss_scsi_add_entry(ctlr, hostno, &sd[i], added, &nadded) != 0) break; } else if (found == 1) { /* should never happen... */ changes++; - printk("cciss%d: device unexpectedly changed type\n", - ctlr); + printk(KERN_WARNING "cciss%d: device " + "unexpectedly changed\n", ctlr); /* but if it does happen, we just ignore that device */ } } @@ -1012,7 +1034,8 @@ cciss_scsi_interpret_error(CommandList_struct *cp) static int cciss_scsi_do_inquiry(ctlr_info_t *c, unsigned char *scsi3addr, - unsigned char *buf, unsigned char bufsize) + unsigned char page, unsigned char *buf, + unsigned char bufsize) { int rc; CommandList_struct *cp; @@ -1032,8 +1055,8 @@ cciss_scsi_do_inquiry(ctlr_info_t *c, unsigned char *scsi3addr, ei = cp->err_info; cdb[0] = CISS_INQUIRY; - cdb[1] = 0; - cdb[2] = 0; + cdb[1] = (page != 0); + cdb[2] = page; cdb[3] = 0; cdb[4] = bufsize; cdb[5] = 0; @@ -1053,6 +1076,25 @@ cciss_scsi_do_inquiry(ctlr_info_t *c, unsigned char *scsi3addr, return rc; } +/* Get the device id from inquiry page 0x83 */ +static int cciss_scsi_get_device_id(ctlr_info_t *c, unsigned char *scsi3addr, + unsigned char *device_id, int buflen) +{ + int rc; + unsigned char *buf; + + if (buflen > 16) + buflen = 16; + buf = kzalloc(64, GFP_KERNEL); + if (!buf) + return -1; + rc = cciss_scsi_do_inquiry(c, scsi3addr, 0x83, buf, 64); + if (rc == 0) + memcpy(device_id, &buf[8], buflen); + kfree(buf); + return rc != 0; +} + static int cciss_scsi_do_report_phys_luns(ctlr_info_t *c, ReportLunData_struct *buf, int bufsize) @@ -1142,25 +1184,21 @@ cciss_update_non_disk_devices(int cntl_num, int hostno) ctlr_info_t *c; __u32 num_luns=0; unsigned char *ch; - /* unsigned char found[CCISS_MAX_SCSI_DEVS_PER_HBA]; */ - struct cciss_scsi_dev_t currentsd[CCISS_MAX_SCSI_DEVS_PER_HBA]; + struct cciss_scsi_dev_t *currentsd, *this_device; int ncurrent=0; int reportlunsize = sizeof(*ld_buff) + CISS_MAX_PHYS_LUN * 8; int i; c = (ctlr_info_t *) hba[cntl_num]; ld_buff = kzalloc(reportlunsize, GFP_KERNEL); - if (ld_buff == NULL) { - printk(KERN_ERR "cciss: out of memory\n"); - return; - } inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); - if (inq_buff == NULL) { - printk(KERN_ERR "cciss: out of memory\n"); - kfree(ld_buff); - return; + currentsd = kzalloc(sizeof(*currentsd) * + (CCISS_MAX_SCSI_DEVS_PER_HBA+1), GFP_KERNEL); + if (ld_buff == NULL || inq_buff == NULL || currentsd == NULL) { + printk(KERN_ERR "cciss: out of memory\n"); + goto out; } - + this_device = ¤tsd[CCISS_MAX_SCSI_DEVS_PER_HBA]; if (cciss_scsi_do_report_phys_luns(c, ld_buff, reportlunsize) == 0) { ch = &ld_buff->LUNListLength[0]; num_luns = ((ch[0]<<24) | (ch[1]<<16) | (ch[2]<<8) | ch[3]) / 8; @@ -1179,23 +1217,34 @@ cciss_update_non_disk_devices(int cntl_num, int hostno) /* adjust our table of devices */ - for(i=0; iLUN[i][3] & 0xC0) continue; memset(inq_buff, 0, OBDR_TAPE_INQ_SIZE); memcpy(&scsi3addr[0], &ld_buff->LUN[i][0], 8); - if (cciss_scsi_do_inquiry(hba[cntl_num], scsi3addr, inq_buff, - (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) { + if (cciss_scsi_do_inquiry(hba[cntl_num], scsi3addr, 0, inq_buff, + (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) /* Inquiry failed (msg printed already) */ - devtype = 0; /* so we will skip this device. */ - } else /* what kind of device is this? */ - devtype = (inq_buff[0] & 0x1f); + continue; /* so we will skip this device. */ - switch (devtype) + this_device->devtype = (inq_buff[0] & 0x1f); + this_device->bus = -1; + this_device->target = -1; + this_device->lun = -1; + memcpy(this_device->scsi3addr, scsi3addr, 8); + memcpy(this_device->vendor, &inq_buff[8], + sizeof(this_device->vendor)); + memcpy(this_device->model, &inq_buff[16], + sizeof(this_device->model)); + memcpy(this_device->revision, &inq_buff[32], + sizeof(this_device->revision)); + memset(this_device->device_id, 0, + sizeof(this_device->device_id)); + cciss_scsi_get_device_id(hba[cntl_num], scsi3addr, + this_device->device_id, sizeof(this_device->device_id)); + + switch (this_device->devtype) { case 0x05: /* CD-ROM */ { @@ -1220,15 +1269,10 @@ cciss_update_non_disk_devices(int cntl_num, int hostno) if (ncurrent >= CCISS_MAX_SCSI_DEVS_PER_HBA) { printk(KERN_INFO "cciss%d: %s ignored, " "too many devices.\n", cntl_num, - scsi_device_type(devtype)); + scsi_device_type(this_device->devtype)); break; } - memcpy(¤tsd[ncurrent].scsi3addr[0], - &scsi3addr[0], 8); - currentsd[ncurrent].devtype = devtype; - currentsd[ncurrent].bus = -1; - currentsd[ncurrent].target = -1; - currentsd[ncurrent].lun = -1; + currentsd[ncurrent] = *this_device; ncurrent++; break; default: @@ -1240,6 +1284,7 @@ cciss_update_non_disk_devices(int cntl_num, int hostno) out: kfree(inq_buff); kfree(ld_buff); + kfree(currentsd); return; } diff --git a/drivers/block/cciss_scsi.h b/drivers/block/cciss_scsi.h index d9c2c586502f..7b750245ae76 100644 --- a/drivers/block/cciss_scsi.h +++ b/drivers/block/cciss_scsi.h @@ -66,6 +66,10 @@ struct cciss_scsi_dev_t { int devtype; int bus, target, lun; /* as presented to the OS */ unsigned char scsi3addr[8]; /* as presented to the HW */ + unsigned char device_id[16]; /* from inquiry pg. 0x83 */ + unsigned char vendor[8]; /* bytes 8-15 of inquiry data */ + unsigned char model[16]; /* bytes 16-31 of inquiry data */ + unsigned char revision[4]; /* bytes 32-35 of inquiry data */ }; struct cciss_scsi_hba_t {