mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-03 01:26:41 +07:00
ARM: dts: rockchip: Add support for phyCORE-RK3288 SoM
The phyCORE-RK3288 is a SoM (System on Module) containing a RK3288 SoC. The module can be connected to different carrier boards. It can be also equipped with different RAM, SPI flash and eMMC variants. The Rapid Development Kit option is using the following setup: - 1 GB DDR3 RAM (2 Banks) - 1x 4 KB EEPROM - DP83867 Gigabit Ethernet PHY - 16 MB SPI Flash - 4 GB eMMC Flash Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Wadim Egorov
Heiko Stuebner
parent
7301f269dd
commit
903d31e346
497
arch/arm/boot/dts/rk3288-phycore-som.dtsi
Normal file
497
arch/arm/boot/dts/rk3288-phycore-som.dtsi
Normal file
@ -0,0 +1,497 @@
|
||||
/*
|
||||
* Device tree file for Phytec phyCORE-RK3288 SoM
|
||||
* Copyright (C) 2017 PHYTEC Messtechnik GmbH
|
||||
* Author: Wadim Egorov <w.egorov@phytec.de>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/net/ti-dp83867.h>
|
||||
#include "rk3288.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Phytec RK3288 phyCORE";
|
||||
compatible = "phytec,rk3288-phycore-som", "rockchip,rk3288";
|
||||
|
||||
/*
|
||||
* Set the minimum memory size here and
|
||||
* let the bootloader set the real size.
|
||||
*/
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0 0x8000000>;
|
||||
};
|
||||
|
||||
aliases {
|
||||
rtc0 = &i2c_rtc;
|
||||
rtc1 = &rk818;
|
||||
};
|
||||
|
||||
ext_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "ext_gmac";
|
||||
};
|
||||
|
||||
leds: user-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&user_led>;
|
||||
|
||||
user {
|
||||
label = "green_led";
|
||||
gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "keep";
|
||||
};
|
||||
};
|
||||
|
||||
vdd_emmc_io: vdd-emmc-io {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_emmc_io";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vdd_3v3_io>;
|
||||
};
|
||||
|
||||
vdd_in_otg_out: vdd-in-otg-out {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_in_otg_out";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vdd_misc_1v8: vdd-misc-1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_misc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu0-supply = <&vdd_cpu>;
|
||||
operating-points = <
|
||||
/* KHz uV */
|
||||
1800000 1400000
|
||||
1608000 1350000
|
||||
1512000 1300000
|
||||
1416000 1200000
|
||||
1200000 1100000
|
||||
1008000 1050000
|
||||
816000 1000000
|
||||
696000 950000
|
||||
600000 900000
|
||||
408000 900000
|
||||
312000 900000
|
||||
216000 900000
|
||||
126000 900000
|
||||
>;
|
||||
};
|
||||
|
||||
&emmc {
|
||||
status = "okay";
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
disable-wp;
|
||||
non-removable;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
|
||||
vmmc-supply = <&vdd_3v3_io>;
|
||||
vqmmc-supply = <&vdd_emmc_io>;
|
||||
};
|
||||
|
||||
&gmac {
|
||||
assigned-clocks = <&cru SCLK_MAC>;
|
||||
assigned-clock-parents = <&ext_gmac>;
|
||||
clock_in_out = "input";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins &phy_rst &phy_int>;
|
||||
phy-handle = <&phy0>;
|
||||
phy-supply = <&vdd_eth_2v5>;
|
||||
phy-mode = "rgmii-id";
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 1000000>;
|
||||
snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
|
||||
tx_delay = <0x0>;
|
||||
rx_delay = <0x0>;
|
||||
|
||||
mdio0 {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
|
||||
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
|
||||
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
|
||||
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
||||
enet-phy-lane-no-swap;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c5>;
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
status = "okay";
|
||||
sdcard-supply = <&vdd_io_sd>;
|
||||
flash0-supply = <&vdd_emmc_io>;
|
||||
flash1-supply = <&vdd_misc_1v8>;
|
||||
gpio1830-supply = <&vdd_3v3_io>;
|
||||
gpio30-supply = <&vdd_3v3_io>;
|
||||
bb-supply = <&vdd_3v3_io>;
|
||||
dvp-supply = <&vdd_3v3_io>;
|
||||
lcdc-supply = <&vdd_3v3_io>;
|
||||
wifi-supply = <&vdd_3v3_io>;
|
||||
audio-supply = <&vdd_3v3_io>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
rk818: pmic@1c {
|
||||
compatible = "rockchip,rk818";
|
||||
reg = <0x1c>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
|
||||
vcc1-supply = <&vdd_sys>;
|
||||
vcc2-supply = <&vdd_sys>;
|
||||
vcc3-supply = <&vdd_sys>;
|
||||
vcc4-supply = <&vdd_sys>;
|
||||
boost-supply = <&vdd_in_otg_out>;
|
||||
vcc6-supply = <&vdd_sys>;
|
||||
vcc7-supply = <&vdd_misc_1v8>;
|
||||
vcc8-supply = <&vdd_misc_1v8>;
|
||||
vcc9-supply = <&vdd_3v3_io>;
|
||||
vddio-supply = <&vdd_3v3_io>;
|
||||
|
||||
regulators {
|
||||
vdd_log: DCDC_REG1 {
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_3v3_io: DCDC_REG4 {
|
||||
regulator-name = "vdd_3v3_io";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_sys: DCDC_BOOST {
|
||||
regulator-name = "vdd_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <5000000>;
|
||||
};
|
||||
};
|
||||
|
||||
/* vcc9 */
|
||||
vdd_sd: SWITCH_REG {
|
||||
regulator-name = "vdd_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
/* vcc6 */
|
||||
vdd_eth_2v5: LDO_REG2 {
|
||||
regulator-name = "vdd_eth_2v5";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <2500000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2500000>;
|
||||
};
|
||||
};
|
||||
|
||||
/* vcc7 */
|
||||
vdd_1v0: LDO_REG3 {
|
||||
regulator-name = "vdd_1v0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
/* vcc8 */
|
||||
vdd_1v8_lcd_ldo: LDO_REG4 {
|
||||
regulator-name = "vdd_1v8_lcd_ldo";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
/* vcc8 */
|
||||
vdd_1v0_lcd: LDO_REG6 {
|
||||
regulator-name = "vdd_1v0_lcd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
/* vcc7 */
|
||||
vdd_1v8_ldo: LDO_REG7 {
|
||||
regulator-name = "vdd_1v8_ldo";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
/* vcc9 */
|
||||
vdd_io_sd: LDO_REG9 {
|
||||
regulator-name = "vdd_io_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* M24C32-D */
|
||||
i2c_eeprom: eeprom@50 {
|
||||
compatible = "atmel,24c32";
|
||||
reg = <0x50>;
|
||||
pagesize = <32>;
|
||||
};
|
||||
|
||||
vdd_cpu: regulator@60 {
|
||||
compatible = "fcs,fan53555";
|
||||
reg = <0x60>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-enable-ramp-delay = <300>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1430000>;
|
||||
regulator-ramp-delay = <8000>;
|
||||
vin-supply = <&vdd_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pcfg_output_high: pcfg-output-high {
|
||||
output-high;
|
||||
};
|
||||
|
||||
emmc {
|
||||
/*
|
||||
* We run eMMC at max speed; bump up drive strength.
|
||||
* We also have external pulls, so disable the internal ones.
|
||||
*/
|
||||
emmc_clk: emmc-clk {
|
||||
rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_12ma>;
|
||||
};
|
||||
|
||||
emmc_cmd: emmc-cmd {
|
||||
rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_12ma>;
|
||||
};
|
||||
|
||||
emmc_bus8: emmc-bus8 {
|
||||
rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_12ma>,
|
||||
<3 1 RK_FUNC_2 &pcfg_pull_none_12ma>,
|
||||
<3 2 RK_FUNC_2 &pcfg_pull_none_12ma>,
|
||||
<3 3 RK_FUNC_2 &pcfg_pull_none_12ma>,
|
||||
<3 4 RK_FUNC_2 &pcfg_pull_none_12ma>,
|
||||
<3 5 RK_FUNC_2 &pcfg_pull_none_12ma>,
|
||||
<3 6 RK_FUNC_2 &pcfg_pull_none_12ma>,
|
||||
<3 7 RK_FUNC_2 &pcfg_pull_none_12ma>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac {
|
||||
phy_int: phy-int {
|
||||
rockchip,pins = <4 2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
phy_rst: phy-rst {
|
||||
rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
user_led: user-led {
|
||||
rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_output_high>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
/* Pin for switching state between sleep and non-sleep state */
|
||||
pmic_sleep: pmic-sleep {
|
||||
rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vdd_1v8_ldo>;
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
|
||||
serial_flash: flash@0 {
|
||||
compatible = "micron,n25q128a13", "jedec,spi-nor";
|
||||
reg = <0x0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
rockchip,hw-tshut-mode = <0>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdt {
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user