ARM: dts: at91: sama5d4: add i2c gpio pinctrl

Add the i2c gpio pinctrls so the i2c bus recovery option can be enabled

Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
[codrin.ciubotariu@microchip.com: removed gpio pull-ups]
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20200225155012.22764-3-codrin.ciubotariu@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This commit is contained in:
Kamel Bouhara 2020-02-25 17:50:11 +02:00 committed by Alexandre Belloni
parent a4bd8da893
commit 8fb82f050c

View File

@ -458,8 +458,11 @@ i2c0: i2c@f8014000 {
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(3))>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
@ -477,8 +480,11 @@ i2c1: i2c@f8018000 {
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(5))>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
scl-gpios = <&pioE 30 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
@ -519,8 +525,11 @@ i2c2: i2c@f8024000 {
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(7))>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
pinctrl-1 = <&pinctrl_i2c2_gpio>;
sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>;
scl-gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
@ -1122,6 +1131,12 @@ pinctrl_i2c0: i2c0-0 {
<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_i2c0_gpio: i2c0-gpio {
atmel,pins =
<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
i2c1 {
@ -1130,6 +1145,12 @@ pinctrl_i2c1: i2c1-0 {
<AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* TWD1, conflicts with UART0 RX and DIBP */
AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* TWCK1, conflicts with UART0 TX and DIBN */
};
pinctrl_i2c1_gpio: i2c1-gpio {
atmel,pins =
<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
i2c2 {
@ -1138,6 +1159,12 @@ pinctrl_i2c2: i2c2-0 {
<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* TWD2, conflicts with RD0 and PWML1 */
AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */
};
pinctrl_i2c2_gpio: i2c2-gpio {
atmel,pins =
<AT91_PIOB 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
AT91_PIOB 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
isi {