From a1ba7a7a929fca888fd119d1d8f5ed0291b7e61b Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Sat, 9 Mar 2013 16:01:47 +0900 Subject: [PATCH 1/7] ARM: EXYNOS: add a register base address variable in mct controller driver All the MCT register read/writes use a fixed remapped address S5P_VA_SYSTIMER. With device tree support for MCT controller, it is possible to remove the static remap of the MCT controller address space and do the remap during the initialization of the MCT controller with the physical address obtained from the device tree. So in preparation of adding device tree support for MCT controller, add a new register base address variable that will hold the remapped MCT controller base address and convert all MCT register read/writes to use this new variable as the base address instead of the fixed S5P_VA_SYSTIMER. While at it, the MCT register offset and bit mask definitions are moved into the MCT controller driver file since there are no other consumers of these definitions. Cc: Changhwan Youn Signed-off-by: Thomas Abraham Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/include/mach/regs-mct.h | 53 ----------- arch/arm/mach-exynos/mct.c | 97 +++++++++++++------- 2 files changed, 62 insertions(+), 88 deletions(-) delete mode 100644 arch/arm/mach-exynos/include/mach/regs-mct.h diff --git a/arch/arm/mach-exynos/include/mach/regs-mct.h b/arch/arm/mach-exynos/include/mach/regs-mct.h deleted file mode 100644 index 80dd02ad6d61..000000000000 --- a/arch/arm/mach-exynos/include/mach/regs-mct.h +++ /dev/null @@ -1,53 +0,0 @@ -/* arch/arm/mach-exynos4/include/mach/regs-mct.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 MCT configutation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_MCT_H -#define __ASM_ARCH_REGS_MCT_H __FILE__ - -#include - -#define EXYNOS4_MCTREG(x) (S5P_VA_SYSTIMER + (x)) - -#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100) -#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104) -#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110) - -#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200) -#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204) -#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208) - -#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240) - -#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244) -#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248) -#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C) - -#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300) -#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x)) -#define EXYNOS4_MCT_L_MASK (0xffffff00) - -#define MCT_L_TCNTB_OFFSET (0x00) -#define MCT_L_ICNTB_OFFSET (0x08) -#define MCT_L_TCON_OFFSET (0x20) -#define MCT_L_INT_CSTAT_OFFSET (0x30) -#define MCT_L_INT_ENB_OFFSET (0x34) -#define MCT_L_WSTAT_OFFSET (0x40) - -#define MCT_G_TCON_START (1 << 8) -#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1) -#define MCT_G_TCON_COMP0_ENABLE (1 << 0) - -#define MCT_L_TCON_INTERVAL_MODE (1 << 2) -#define MCT_L_TCON_INT_START (1 << 1) -#define MCT_L_TCON_TIMER_START (1 << 0) - -#endif /* __ASM_ARCH_REGS_MCT_H */ diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index c9d6650f9b5d..ffd1323ed7db 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -28,9 +28,36 @@ #include #include -#include #include +#define EXYNOS4_MCTREG(x) (x) +#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100) +#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104) +#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110) +#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200) +#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204) +#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208) +#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240) +#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244) +#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248) +#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C) +#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300) +#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x)) +#define EXYNOS4_MCT_L_MASK (0xffffff00) + +#define MCT_L_TCNTB_OFFSET (0x00) +#define MCT_L_ICNTB_OFFSET (0x08) +#define MCT_L_TCON_OFFSET (0x20) +#define MCT_L_INT_CSTAT_OFFSET (0x30) +#define MCT_L_INT_ENB_OFFSET (0x34) +#define MCT_L_WSTAT_OFFSET (0x40) +#define MCT_G_TCON_START (1 << 8) +#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1) +#define MCT_G_TCON_COMP0_ENABLE (1 << 0) +#define MCT_L_TCON_INTERVAL_MODE (1 << 2) +#define MCT_L_TCON_INT_START (1 << 1) +#define MCT_L_TCON_TIMER_START (1 << 0) + #define TICK_BASE_CNT 1 enum { @@ -38,64 +65,62 @@ enum { MCT_INT_PPI }; +static void __iomem *reg_base; static unsigned long clk_rate; static unsigned int mct_int_type; struct mct_clock_event_device { struct clock_event_device *evt; - void __iomem *base; + unsigned long base; char name[10]; }; -static void exynos4_mct_write(unsigned int value, void *addr) +static void exynos4_mct_write(unsigned int value, unsigned long offset) { - void __iomem *stat_addr; + unsigned long stat_addr; u32 mask; u32 i; - __raw_writel(value, addr); + __raw_writel(value, reg_base + offset); - if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) { - u32 base = (u32) addr & EXYNOS4_MCT_L_MASK; - switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) { - case (u32) MCT_L_TCON_OFFSET: - stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET; + if (likely(offset >= EXYNOS4_MCT_L_BASE(0))) { + stat_addr = (offset & ~EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET; + switch (offset & EXYNOS4_MCT_L_MASK) { + case MCT_L_TCON_OFFSET: mask = 1 << 3; /* L_TCON write status */ break; - case (u32) MCT_L_ICNTB_OFFSET: - stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET; + case MCT_L_ICNTB_OFFSET: mask = 1 << 1; /* L_ICNTB write status */ break; - case (u32) MCT_L_TCNTB_OFFSET: - stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET; + case MCT_L_TCNTB_OFFSET: mask = 1 << 0; /* L_TCNTB write status */ break; default: return; } } else { - switch ((u32) addr) { - case (u32) EXYNOS4_MCT_G_TCON: + switch (offset) { + case EXYNOS4_MCT_G_TCON: stat_addr = EXYNOS4_MCT_G_WSTAT; mask = 1 << 16; /* G_TCON write status */ break; - case (u32) EXYNOS4_MCT_G_COMP0_L: + case EXYNOS4_MCT_G_COMP0_L: stat_addr = EXYNOS4_MCT_G_WSTAT; mask = 1 << 0; /* G_COMP0_L write status */ break; - case (u32) EXYNOS4_MCT_G_COMP0_U: + case EXYNOS4_MCT_G_COMP0_U: stat_addr = EXYNOS4_MCT_G_WSTAT; mask = 1 << 1; /* G_COMP0_U write status */ break; - case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR: + case EXYNOS4_MCT_G_COMP0_ADD_INCR: stat_addr = EXYNOS4_MCT_G_WSTAT; mask = 1 << 2; /* G_COMP0_ADD_INCR w status */ break; - case (u32) EXYNOS4_MCT_G_CNT_L: + case EXYNOS4_MCT_G_CNT_L: stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; mask = 1 << 0; /* G_CNT_L write status */ break; - case (u32) EXYNOS4_MCT_G_CNT_U: + case EXYNOS4_MCT_G_CNT_U: stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; mask = 1 << 1; /* G_CNT_U write status */ break; @@ -106,12 +131,12 @@ static void exynos4_mct_write(unsigned int value, void *addr) /* Wait maximum 1 ms until written values are applied */ for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++) - if (__raw_readl(stat_addr) & mask) { - __raw_writel(mask, stat_addr); + if (__raw_readl(reg_base + stat_addr) & mask) { + __raw_writel(mask, reg_base + stat_addr); return; } - panic("MCT hangs after writing %d (addr:0x%08x)\n", value, (u32)addr); + panic("MCT hangs after writing %d (offset:0x%lx)\n", value, offset); } /* Clocksource handling */ @@ -122,7 +147,7 @@ static void exynos4_mct_frc_start(u32 hi, u32 lo) exynos4_mct_write(lo, EXYNOS4_MCT_G_CNT_L); exynos4_mct_write(hi, EXYNOS4_MCT_G_CNT_U); - reg = __raw_readl(EXYNOS4_MCT_G_TCON); + reg = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON); reg |= MCT_G_TCON_START; exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON); } @@ -130,12 +155,12 @@ static void exynos4_mct_frc_start(u32 hi, u32 lo) static cycle_t exynos4_frc_read(struct clocksource *cs) { unsigned int lo, hi; - u32 hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U); + u32 hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U); do { hi = hi2; - lo = __raw_readl(EXYNOS4_MCT_G_CNT_L); - hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U); + lo = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_L); + hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U); } while (hi != hi2); return ((cycle_t)hi << 32) | lo; @@ -167,7 +192,7 @@ static void exynos4_mct_comp0_stop(void) { unsigned int tcon; - tcon = __raw_readl(EXYNOS4_MCT_G_TCON); + tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON); tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC); exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON); @@ -180,7 +205,7 @@ static void exynos4_mct_comp0_start(enum clock_event_mode mode, unsigned int tcon; cycle_t comp_cycle; - tcon = __raw_readl(EXYNOS4_MCT_G_TCON); + tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON); if (mode == CLOCK_EVT_MODE_PERIODIC) { tcon |= MCT_G_TCON_COMP0_AUTO_INC; @@ -273,12 +298,12 @@ static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt) { unsigned long tmp; unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START; - void __iomem *addr = mevt->base + MCT_L_TCON_OFFSET; + unsigned long offset = mevt->base + MCT_L_TCON_OFFSET; - tmp = __raw_readl(addr); + tmp = __raw_readl(reg_base + offset); if (tmp & mask) { tmp &= ~mask; - exynos4_mct_write(tmp, addr); + exynos4_mct_write(tmp, offset); } } @@ -297,7 +322,7 @@ static void exynos4_mct_tick_start(unsigned long cycles, /* enable MCT tick interrupt */ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET); - tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET); + tmp = __raw_readl(reg_base + mevt->base + MCT_L_TCON_OFFSET); tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START | MCT_L_TCON_INTERVAL_MODE; exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET); @@ -349,7 +374,7 @@ static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt) exynos4_mct_tick_stop(mevt); /* Clear the MCT tick interrupt */ - if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) { + if (__raw_readl(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) { exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET); return 1; } else { @@ -452,6 +477,8 @@ static void __init exynos4_timer_resources(void) clk_rate = clk_get_rate(mct_clk); + reg_base = S5P_VA_SYSTIMER; + #ifdef CONFIG_LOCAL_TIMERS if (mct_int_type == MCT_INT_PPI) { int err; From c371dc60aebf7ada4d5b4585ea8f46a3a06f8f04 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Sat, 9 Mar 2013 16:01:50 +0900 Subject: [PATCH 2/7] ARM: EXYNOS: prepare an array of MCT interrupt numbers and use it Instead of using soc_is_xxx macro at more than one place in the MCT controller driver to decide the MCT interrpt number to be setup, populate a table of known MCT global and local timer interrupts and use the values in table to setup the MCT interrupts. This also helps in adding device tree support for MCT controller driver by allowing the driver to retrieve interrupt numbers from device tree and populating them into this table, thereby supporting both legacy and dt functionality to co-exist. Cc: Changhwan Youn Signed-off-by: Thomas Abraham Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/mct.c | 57 ++++++++++++++++++++++++-------------- 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index ffd1323ed7db..1061db4118aa 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -65,9 +65,22 @@ enum { MCT_INT_PPI }; +enum { + MCT_G0_IRQ, + MCT_G1_IRQ, + MCT_G2_IRQ, + MCT_G3_IRQ, + MCT_L0_IRQ, + MCT_L1_IRQ, + MCT_L2_IRQ, + MCT_L3_IRQ, + MCT_NR_IRQS, +}; + static void __iomem *reg_base; static unsigned long clk_rate; static unsigned int mct_int_type; +static int mct_irqs[MCT_NR_IRQS]; struct mct_clock_event_device { struct clock_event_device *evt; @@ -282,11 +295,7 @@ static void exynos4_clockevent_init(void) mct_comp_device.cpumask = cpumask_of(0); clockevents_config_and_register(&mct_comp_device, clk_rate, 0xf, 0xffffffff); - - if (soc_is_exynos5250()) - setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq); - else - setup_irq(EXYNOS4_IRQ_MCT_G0, &mct_comp_event_irq); + setup_irq(mct_irqs[MCT_G0_IRQ], &mct_comp_event_irq); } #ifdef CONFIG_LOCAL_TIMERS @@ -410,7 +419,6 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt) { struct mct_clock_event_device *mevt; unsigned int cpu = smp_processor_id(); - int mct_lx_irq; mevt = this_cpu_ptr(&percpu_mct_tick); mevt->evt = evt; @@ -431,21 +439,17 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt) if (mct_int_type == MCT_INT_SPI) { if (cpu == 0) { - mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L0 : - EXYNOS5_IRQ_MCT_L0; mct_tick0_event_irq.dev_id = mevt; - evt->irq = mct_lx_irq; - setup_irq(mct_lx_irq, &mct_tick0_event_irq); + evt->irq = mct_irqs[MCT_L0_IRQ]; + setup_irq(evt->irq, &mct_tick0_event_irq); } else { - mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L1 : - EXYNOS5_IRQ_MCT_L1; mct_tick1_event_irq.dev_id = mevt; - evt->irq = mct_lx_irq; - setup_irq(mct_lx_irq, &mct_tick1_event_irq); - irq_set_affinity(mct_lx_irq, cpumask_of(1)); + evt->irq = mct_irqs[MCT_L1_IRQ]; + setup_irq(evt->irq, &mct_tick1_event_irq); + irq_set_affinity(evt->irq, cpumask_of(1)); } } else { - enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0); + enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0); } return 0; @@ -461,7 +465,7 @@ static void exynos4_local_timer_stop(struct clock_event_device *evt) else remove_irq(evt->irq, &mct_tick1_event_irq); else - disable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER); + disable_percpu_irq(mct_irqs[MCT_L0_IRQ]); } static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = { @@ -483,11 +487,11 @@ static void __init exynos4_timer_resources(void) if (mct_int_type == MCT_INT_PPI) { int err; - err = request_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, + err = request_percpu_irq(mct_irqs[MCT_L0_IRQ], exynos4_mct_tick_isr, "MCT", &percpu_mct_tick); WARN(err, "MCT: can't request IRQ %d (%d)\n", - EXYNOS_IRQ_MCT_LOCALTIMER, err); + mct_irqs[MCT_L0_IRQ], err); } local_timer_register(&exynos4_mct_tick_ops); @@ -501,10 +505,21 @@ void __init exynos4_timer_init(void) return; } - if ((soc_is_exynos4210()) || (soc_is_exynos5250())) + if (soc_is_exynos4210()) { + mct_irqs[MCT_G0_IRQ] = EXYNOS4_IRQ_MCT_G0; + mct_irqs[MCT_L0_IRQ] = EXYNOS4_IRQ_MCT_L0; + mct_irqs[MCT_L1_IRQ] = EXYNOS4_IRQ_MCT_L1; mct_int_type = MCT_INT_SPI; - else + } else if (soc_is_exynos5250()) { + mct_irqs[MCT_G0_IRQ] = EXYNOS5_IRQ_MCT_G0; + mct_irqs[MCT_L0_IRQ] = EXYNOS5_IRQ_MCT_L0; + mct_irqs[MCT_L1_IRQ] = EXYNOS5_IRQ_MCT_L1; + mct_int_type = MCT_INT_SPI; + } else { + mct_irqs[MCT_G0_IRQ] = EXYNOS4_IRQ_MCT_G0; + mct_irqs[MCT_L0_IRQ] = EXYNOS_IRQ_MCT_LOCALTIMER; mct_int_type = MCT_INT_PPI; + } exynos4_timer_resources(); exynos4_clocksource_init(); From 36ba5d527e9567ed303bad6e86a5f3c2723470f6 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Sat, 9 Mar 2013 16:01:52 +0900 Subject: [PATCH 3/7] ARM: EXYNOS: add device tree support for MCT controller driver Allow the MCT controller base address and interrupts to be obtained from device tree and remove unused static definitions of these. The non-dt support for Exynos5250 is removed but retained for Exynos4210 based platforms. Cc: Changhwan Youn Signed-off-by: Thomas Abraham Reviewed-by: Stephen Warren Signed-off-by: Kukjin Kim --- .../bindings/timer/samsung,exynos4210-mct.txt | 68 +++++++++++++++++++ arch/arm/mach-exynos/include/mach/irqs.h | 6 -- arch/arm/mach-exynos/mct.c | 49 +++++++++---- 3 files changed, 105 insertions(+), 18 deletions(-) create mode 100644 Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt new file mode 100644 index 000000000000..cb47bfbcaeea --- /dev/null +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt @@ -0,0 +1,68 @@ +Samsung's Multi Core Timer (MCT) + +The Samsung's Multi Core Timer (MCT) module includes two main blocks, the +global timer and CPU local timers. The global timer is a 64-bit free running +up-counter and can generate 4 interrupts when the counter reaches one of the +four preset counter values. The CPU local timers are 32-bit free running +down-counters and generate an interrupt when the counter expires. There is +one CPU local timer instantiated in MCT for every CPU in the system. + +Required properties: + +- compatible: should be "samsung,exynos4210-mct". + (a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct. + (b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct. + +- reg: base address of the mct controller and length of the address space + it occupies. + +- interrupts: the list of interrupts generated by the controller. The following + should be the order of the interrupts specified. The local timer interrupts + should be specified after the four global timer interrupts have been + specified. + + 0: Global Timer Interrupt 0 + 1: Global Timer Interrupt 1 + 2: Global Timer Interrupt 2 + 3: Global Timer Interrupt 3 + 4: Local Timer Interrupt 0 + 5: Local Timer Interrupt 1 + 6: .. + 7: .. + i: Local Timer Interrupt n + +Example 1: In this example, the system uses only the first global timer + interrupt generated by MCT and the remaining three global timer + interrupts are unused. Two local timer interrupts have been + specified. + + mct@10050000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x10050000 0x800>; + interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>, + <0 42 0>, <0 48 0>; + }; + +Example 2: In this example, the MCT global and local timer interrupts are + connected to two seperate interrupt controllers. Hence, an + interrupt-map is created to map the interrupts to the respective + interrupt controllers. + + mct@101C0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101C0000 0x800>; + interrupt-controller; + #interrups-cells = <2>; + interrupt-parent = <&mct_map>; + interrupts = <0 0>, <1 0>, <2 0>, <3 0>, + <4 0>, <5 0>; + + mct_map: mct-map { + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0x0 0 &combiner 23 3>, + <0x4 0 &gic 0 120 0>, + <0x5 0 &gic 0 121 0>; + }; + }; diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 1f4dc35cd4b9..c0e75d8dd737 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -30,8 +30,6 @@ /* For EXYNOS4 and EXYNOS5 */ -#define EXYNOS_IRQ_MCT_LOCALTIMER IRQ_PPI(12) - #define EXYNOS_IRQ_EINT16_31 IRQ_SPI(32) /* For EXYNOS4 SoCs */ @@ -323,8 +321,6 @@ #define EXYNOS5_IRQ_CEC IRQ_SPI(114) #define EXYNOS5_IRQ_SATA IRQ_SPI(115) -#define EXYNOS5_IRQ_MCT_L0 IRQ_SPI(120) -#define EXYNOS5_IRQ_MCT_L1 IRQ_SPI(121) #define EXYNOS5_IRQ_MMC44 IRQ_SPI(123) #define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124) #define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125) @@ -419,8 +415,6 @@ #define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(22, 4) #define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0) -#define EXYNOS5_IRQ_MCT_G0 COMBINER_IRQ(23, 3) -#define EXYNOS5_IRQ_MCT_G1 COMBINER_IRQ(23, 4) #define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0) #define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1) diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index 1061db4118aa..f34c933314f3 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -20,6 +20,8 @@ #include #include #include +#include +#include #include #include @@ -474,14 +476,16 @@ static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = { }; #endif /* CONFIG_LOCAL_TIMERS */ -static void __init exynos4_timer_resources(void) +static void __init exynos4_timer_resources(struct device_node *np) { struct clk *mct_clk; mct_clk = clk_get(NULL, "xtal"); clk_rate = clk_get_rate(mct_clk); - reg_base = S5P_VA_SYSTIMER; + reg_base = np ? of_iomap(np, 0) : S5P_VA_SYSTIMER; + if (!reg_base) + panic("%s: unable to ioremap mct address space\n", __func__); #ifdef CONFIG_LOCAL_TIMERS if (mct_int_type == MCT_INT_PPI) { @@ -498,30 +502,51 @@ static void __init exynos4_timer_resources(void) #endif /* CONFIG_LOCAL_TIMERS */ } +static const struct of_device_id exynos_mct_ids[] = { + { .compatible = "samsung,exynos4210-mct", .data = (void *)MCT_INT_SPI }, + { .compatible = "samsung,exynos4412-mct", .data = (void *)MCT_INT_PPI }, +}; + void __init exynos4_timer_init(void) { + struct device_node *np = NULL; + const struct of_device_id *match; + u32 nr_irqs, i; + if (soc_is_exynos5440()) { arch_timer_of_register(); return; } - if (soc_is_exynos4210()) { +#ifdef CONFIG_OF + np = of_find_matching_node_and_match(NULL, exynos_mct_ids, &match); +#endif + if (np) { + mct_int_type = (u32)(match->data); + + /* This driver uses only one global timer interrupt */ + mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ); + + /* + * Find out the number of local irqs specified. The local + * timer irqs are specified after the four global timer + * irqs are specified. + */ +#ifdef CONFIG_OF + nr_irqs = of_irq_count(np); +#endif + for (i = MCT_L0_IRQ; i < nr_irqs; i++) + mct_irqs[i] = irq_of_parse_and_map(np, i); + } else if (soc_is_exynos4210()) { mct_irqs[MCT_G0_IRQ] = EXYNOS4_IRQ_MCT_G0; mct_irqs[MCT_L0_IRQ] = EXYNOS4_IRQ_MCT_L0; mct_irqs[MCT_L1_IRQ] = EXYNOS4_IRQ_MCT_L1; mct_int_type = MCT_INT_SPI; - } else if (soc_is_exynos5250()) { - mct_irqs[MCT_G0_IRQ] = EXYNOS5_IRQ_MCT_G0; - mct_irqs[MCT_L0_IRQ] = EXYNOS5_IRQ_MCT_L0; - mct_irqs[MCT_L1_IRQ] = EXYNOS5_IRQ_MCT_L1; - mct_int_type = MCT_INT_SPI; } else { - mct_irqs[MCT_G0_IRQ] = EXYNOS4_IRQ_MCT_G0; - mct_irqs[MCT_L0_IRQ] = EXYNOS_IRQ_MCT_LOCALTIMER; - mct_int_type = MCT_INT_PPI; + panic("unable to determine mct controller type\n"); } - exynos4_timer_resources(); + exynos4_timer_resources(np); exynos4_clocksource_init(); exynos4_clockevent_init(); } From 9fbf0c85a1c0f1c927822c3026c8db9539570267 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Sat, 9 Mar 2013 16:10:03 +0900 Subject: [PATCH 4/7] ARM: EXYNOS: allow dt based discovery of mct controller using clocksource_of_init Add entries to __clksrc_of_table so that Exynos MCT controller is discoverable using call to clocksource_of_init. With this change, it would be appropriate to rename the function 'exynos4_timer_init' as 'mct_init' since it aptly describes this function. Additionally, the 'init_time' callback of all machine descriptors for exynos platforms that were previously set to 'exynos4_timer_init' are now set to either 'mct_init' or 'clocksource_of_init'. Cc: Changhwan Youn Signed-off-by: Thomas Abraham Reviewed-by: Stephen Warren Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Kconfig | 2 ++ arch/arm/mach-exynos/common.h | 2 +- arch/arm/mach-exynos/mach-armlex4210.c | 2 +- arch/arm/mach-exynos/mach-exynos4-dt.c | 3 ++- arch/arm/mach-exynos/mach-exynos5-dt.c | 3 ++- arch/arm/mach-exynos/mach-nuri.c | 2 +- arch/arm/mach-exynos/mach-origen.c | 2 +- arch/arm/mach-exynos/mach-smdk4x12.c | 4 ++-- arch/arm/mach-exynos/mach-smdkv310.c | 4 ++-- arch/arm/mach-exynos/mct.c | 10 ++++------ 10 files changed, 18 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 70f94c87479d..52f51e7b4a0c 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -406,6 +406,7 @@ config MACH_EXYNOS4_DT bool "Samsung Exynos4 Machine using device tree" depends on ARCH_EXYNOS4 select ARM_AMBA + select CLKSRC_OF select CPU_EXYNOS4210 select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD select PINCTRL @@ -422,6 +423,7 @@ config MACH_EXYNOS5_DT default y depends on ARCH_EXYNOS5 select ARM_AMBA + select CLKSRC_OF select USE_OF help Machine support for Samsung EXYNOS5 machine with device tree enabled. diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 9339bb8954be..3b186eaaaa7b 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -12,7 +12,7 @@ #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H #define __ARCH_ARM_MACH_EXYNOS_COMMON_H -extern void exynos4_timer_init(void); +extern void mct_init(void); struct map_desc; void exynos_init_io(struct map_desc *mach_desc, int size); diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c index 685f29173afa..3b1a34742679 100644 --- a/arch/arm/mach-exynos/mach-armlex4210.c +++ b/arch/arm/mach-exynos/mach-armlex4210.c @@ -202,6 +202,6 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210") .map_io = armlex4210_map_io, .init_machine = armlex4210_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = mct_init, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index 3358088c822a..c4ae108e192d 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -13,6 +13,7 @@ #include #include +#include #include #include @@ -142,7 +143,7 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") .map_io = exynos4_dt_map_io, .init_machine = exynos4_dt_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = clocksource_of_init, .dt_compat = exynos4_dt_compat, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index acaeb14db54b..7da4791bfb8b 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -216,7 +217,7 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") .map_io = exynos5_dt_map_io, .init_machine = exynos5_dt_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = clocksource_of_init, .dt_compat = exynos5_dt_compat, .restart = exynos5_restart, .reserve = exynos5_reserve, diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 1ea79730187f..da3605d15110 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -1380,7 +1380,7 @@ MACHINE_START(NURI, "NURI") .map_io = nuri_map_io, .init_machine = nuri_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = mct_init, .reserve = &nuri_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 579d2d171daa..1772cd284f4c 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -815,7 +815,7 @@ MACHINE_START(ORIGEN, "ORIGEN") .map_io = origen_map_io, .init_machine = origen_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = mct_init, .reserve = &origen_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index fe6149624b84..34a6356364eb 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -376,7 +376,7 @@ MACHINE_START(SMDK4212, "SMDK4212") .init_irq = exynos4_init_irq, .map_io = smdk4x12_map_io, .init_machine = smdk4x12_machine_init, - .init_time = exynos4_timer_init, + .init_time = mct_init, .restart = exynos4_restart, .reserve = &smdk4x12_reserve, MACHINE_END @@ -390,7 +390,7 @@ MACHINE_START(SMDK4412, "SMDK4412") .map_io = smdk4x12_map_io, .init_machine = smdk4x12_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = mct_init, .restart = exynos4_restart, .reserve = &smdk4x12_reserve, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index d71672922b19..893b14e8c62a 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -423,7 +423,7 @@ MACHINE_START(SMDKV310, "SMDKV310") .init_irq = exynos4_init_irq, .map_io = smdkv310_map_io, .init_machine = smdkv310_machine_init, - .init_time = exynos4_timer_init, + .init_time = mct_init, .reserve = &smdkv310_reserve, .restart = exynos4_restart, MACHINE_END @@ -436,7 +436,7 @@ MACHINE_START(SMDKC210, "SMDKC210") .map_io = smdkv310_map_io, .init_machine = smdkv310_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = mct_init, .reserve = &smdkv310_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index f34c933314f3..545c98976e93 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -507,17 +508,12 @@ static const struct of_device_id exynos_mct_ids[] = { { .compatible = "samsung,exynos4412-mct", .data = (void *)MCT_INT_PPI }, }; -void __init exynos4_timer_init(void) +void __init mct_init(void) { struct device_node *np = NULL; const struct of_device_id *match; u32 nr_irqs, i; - if (soc_is_exynos5440()) { - arch_timer_of_register(); - return; - } - #ifdef CONFIG_OF np = of_find_matching_node_and_match(NULL, exynos_mct_ids, &match); #endif @@ -550,3 +546,5 @@ void __init exynos4_timer_init(void) exynos4_clocksource_init(); exynos4_clockevent_init(); } +CLOCKSOURCE_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init) +CLOCKSOURCE_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init) From bbd9700a19b732dc9d8ad6fec6f1cdb8d5f5b041 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Sat, 9 Mar 2013 16:12:35 +0900 Subject: [PATCH 5/7] ARM: dts: add mct device tree node for all supported Exynos SoC's Add MCT device tree node for Exynos4210, Exynos4212, Exynos4412 and Exynos5250. Cc: Changhwan Youn Signed-off-by: Thomas Abraham Reviewed-by: Stephen Warren Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4210.dtsi | 22 ++++++++++++++++++++++ arch/arm/boot/dts/exynos4212.dtsi | 22 ++++++++++++++++++++++ arch/arm/boot/dts/exynos4412.dtsi | 24 ++++++++++++++++++++++++ arch/arm/boot/dts/exynos5250.dtsi | 22 ++++++++++++++++++++++ 4 files changed, 90 insertions(+) diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 2feffc70814c..49a2786e00b9 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -47,6 +47,28 @@ combiner:interrupt-controller@10440000 { <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; }; + mct@10050000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x10050000 0x800>; + interrupt-controller; + #interrups-cells = <2>; + interrupt-parent = <&mct_map>; + interrupts = <0 0>, <1 0>, <2 0>, <3 0>, + <4 0>, <5 0>; + + mct_map: mct-map { + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0x0 0 &gic 0 57 0>, + <0x1 0 &gic 0 69 0>, + <0x2 0 &combiner 12 6>, + <0x3 0 &combiner 12 7>, + <0x4 0 &gic 0 42 0>, + <0x5 0 &gic 0 48 0>; + }; + }; + pinctrl_0: pinctrl@11400000 { compatible = "samsung,exynos4210-pinctrl"; reg = <0x11400000 0x1000>; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index c6ae2005961f..36d4299789ef 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -25,4 +25,26 @@ / { gic:interrupt-controller@10490000 { cpu-offset = <0x8000>; }; + + mct@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + interrupt-controller; + #interrups-cells = <2>; + interrupt-parent = <&mct_map>; + interrupts = <0 0>, <1 0>, <2 0>, <3 0>, + <4 0>, <5 0>; + + mct_map: mct-map { + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0x0 0 &gic 0 57 0>, + <0x1 0 &combiner 12 5>, + <0x2 0 &combiner 12 6>, + <0x3 0 &combiner 12 7>, + <0x4 0 &gic 1 12 0>, + <0x5 0 &gic 1 12 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index d7dfe312772a..821c9fdd1e3b 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -25,4 +25,28 @@ / { gic:interrupt-controller@10490000 { cpu-offset = <0x4000>; }; + + mct@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + interrupt-controller; + #interrups-cells = <2>; + interrupt-parent = <&mct_map>; + interrupts = <0 0>, <1 0>, <2 0>, <3 0>, + <4 0>, <5 0>, <6 0>, <7 0>; + + mct_map: mct-map { + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0x0 0 &gic 0 57 0>, + <0x1 0 &combiner 12 5>, + <0x2 0 &combiner 12 6>, + <0x3 0 &combiner 12 7>, + <0x4 0 &gic 1 12 0>, + <0x5 0 &gic 1 12 0>, + <0x6 0 &gic 1 12 0>, + <0x7 0 &gic 1 12 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index b1ac73e21c80..c60108e0d27e 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -69,6 +69,28 @@ combiner:interrupt-controller@10440000 { <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; }; + mct@101C0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101C0000 0x800>; + interrupt-controller; + #interrups-cells = <2>; + interrupt-parent = <&mct_map>; + interrupts = <0 0>, <1 0>, <2 0>, <3 0>, + <4 0>, <5 0>; + + mct_map: mct-map { + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0x0 0 &combiner 23 3>, + <0x1 0 &combiner 23 4>, + <0x2 0 &combiner 25 2>, + <0x3 0 &combiner 25 3>, + <0x4 0 &gic 0 120 0>, + <0x5 0 &gic 0 121 0>; + }; + }; + watchdog { compatible = "samsung,s3c2410-wdt"; reg = <0x101D0000 0x100>; From c933512bb6948763f8e7f340f026b4167c117920 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Sat, 9 Mar 2013 16:12:38 +0900 Subject: [PATCH 6/7] ARM: EXYNOS: remove static io-remapping of mct registers for Exynos5 With device tree support enabled for MCT controller, the staticio-remapping of the MCT controller address space is removed for Exynos5 platforms (which supports only device tree based boot). Cc: Changhwan Youn Signed-off-by: Thomas Abraham Reviewed-by: Stephen Warren Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/common.c | 5 ----- arch/arm/mach-exynos/include/mach/map.h | 1 - 2 files changed, 6 deletions(-) diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index d63d399c7bae..f91dad6fe9a3 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -256,11 +256,6 @@ static struct map_desc exynos5_iodesc[] __initdata = { .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC), .length = SZ_4K, .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_SYSTIMER, - .pfn = __phys_to_pfn(EXYNOS5_PA_SYSTIMER), - .length = SZ_4K, - .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_SYSRAM, .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM), diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 1df6abbf53b8..7f99b7b187d6 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -65,7 +65,6 @@ #define EXYNOS5_PA_CMU 0x10010000 #define EXYNOS4_PA_SYSTIMER 0x10050000 -#define EXYNOS5_PA_SYSTIMER 0x101C0000 #define EXYNOS4_PA_WATCHDOG 0x10060000 #define EXYNOS5_PA_WATCHDOG 0x101D0000 From 6938d75a8c1a1752f9fa7ef14a0c570036c7b73b Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Sat, 9 Mar 2013 16:16:13 +0900 Subject: [PATCH 7/7] ARM: EXYNOS: move mct driver to drivers/clocksource Move the multi core timer (mct) driver to from mach-exynos to drivers/clocksource and update the Kconfig and makefiles. Cc: Changhwan Youn Signed-off-by: Thomas Abraham Reviewed-by: Stephen Warren Signed-off-by: Kukjin Kim --- arch/arm/Kconfig | 2 +- arch/arm/mach-exynos/Kconfig | 6 ------ arch/arm/mach-exynos/Makefile | 2 -- drivers/clocksource/Kconfig | 5 +++++ drivers/clocksource/Makefile | 1 + .../mach-exynos/mct.c => drivers/clocksource/exynos_mct.c | 0 6 files changed, 7 insertions(+), 9 deletions(-) rename arch/arm/mach-exynos/mct.c => drivers/clocksource/exynos_mct.c (100%) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5b714695b01b..94a062894a10 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1650,7 +1650,7 @@ config LOCAL_TIMERS bool "Use local timer interrupts" depends on SMP default y - select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT) + select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !CLKSRC_EXYNOS_MCT) help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 52f51e7b4a0c..b0802eb24d40 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -79,12 +79,6 @@ config SOC_EXYNOS5440 help Enable EXYNOS5440 SoC support -config EXYNOS4_MCT - bool - default y - help - Use MCT (Multi Core Timer) as kernel timers - config EXYNOS_DEV_DMA bool help diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 435757e57bb4..daf289b21486 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -26,8 +26,6 @@ obj-$(CONFIG_ARCH_EXYNOS) += pmu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o -obj-$(CONFIG_EXYNOS4_MCT) += mct.o - obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o # machine support diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index e507ab7df60b..e8c453285151 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -67,3 +67,8 @@ config CLKSRC_METAG_GENERIC def_bool y if METAG help This option enables support for the Meta per-thread timers. + +config CLKSRC_EXYNOS_MCT + def_bool y if ARCH_EXYNOS + help + Support for Multi Core Timer controller on Exynos SoCs. diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 4d8283aec5b5..1c1b15db7c4d 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o +obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o diff --git a/arch/arm/mach-exynos/mct.c b/drivers/clocksource/exynos_mct.c similarity index 100% rename from arch/arm/mach-exynos/mct.c rename to drivers/clocksource/exynos_mct.c