clk: mdm9615: Add EBI2 clock

Add definition of EBI2 clock used by MDM9615 NAND controller.

Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-soc@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Zoran Markovic <zmarkovic@sierrawireless.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
[sboyd@codeaurora.org: ebi2_clk halt bit is 24 not 23]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

drivers/clk/qcom/gcc-mdm9615.c

@@ -1563,6 +1563,34 @@ static struct clk_branch rpm_msg_ram_h_clk = {
 	},
 };
 
+static struct clk_branch ebi2_clk = {
+	.hwcg_reg = 0x2664,
+	.hwcg_bit = 6,
+	.halt_reg = 0x2fcc,
+	.halt_bit = 24,
+	.clkr = {
+		.enable_reg = 0x2664,
+		.enable_mask = BIT(6) | BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "ebi2_clk",
+			.ops = &clk_branch_ops,
+		},
+	},
+};
+
+static struct clk_branch ebi2_aon_clk = {
+	.halt_reg = 0x2fcc,
+	.halt_bit = 23,
+	.clkr = {
+		.enable_reg = 0x2664,
+		.enable_mask = BIT(8),
+		.hw.init = &(struct clk_init_data){
+			.name = "ebi2_aon_clk",
+			.ops = &clk_branch_ops,
+		},
+	},
+};
+
 static struct clk_hw *gcc_mdm9615_hws[] = {
 	&cxo.hw,
 };
@@ -1637,6 +1665,8 @@ static struct clk_regmap *gcc_mdm9615_clks[] = {
 	[PMIC_ARB1_H_CLK] = &pmic_arb1_h_clk.clkr,
 	[PMIC_SSBI2_CLK] = &pmic_ssbi2_clk.clkr,
 	[RPM_MSG_RAM_H_CLK] = &rpm_msg_ram_h_clk.clkr,
+	[EBI2_CLK] = &ebi2_clk.clkr,
+	[EBI2_AON_CLK] = &ebi2_aon_clk.clkr,
 };
 
 static const struct qcom_reset_map gcc_mdm9615_resets[] = {

include/dt-bindings/clock/qcom,gcc-mdm9615.h

@@ -323,5 +323,7 @@
 #define CE3_H_CLK				305
 #define USB_HS1_SYSTEM_CLK_SRC			306
 #define USB_HS1_SYSTEM_CLK			307
+#define EBI2_CLK				308
+#define EBI2_AON_CLK				309
 
 #endif