AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-25 08:40:53 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

MN10300: fix serial port vdma irq setup for SMP

Browse Source 
The builtin SoC serial ports have no FIFOs and use a virtual DMA mechanism
based on high priority IRQs to avoid overruns. These high priority interrupts
are pinned to cpu#0 on SMP systems. This patch fixes a problem with SMP where
the set_intr_level() interface is used to set the priority for these IRQs. The
set_intr_level() function sets priority on the local cpu but on SMP systems,
this code may be run on some other cpu than the one handling the interrupts.
Instead of setting interrupt level explicitly, this patch uses a special
irq_chip for these interrupts so that the mask/unmask methods can set the
interrupt level implicitly.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
This commit is contained in:
Mark Salter 2012-12-12 15:36:38 +00:00 committed by David Howells
parent 7d361cb754
commit 8d160027ff
1 changed files with 30 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

34
arch/mn10300/kernel/mn10300-serial.c
View File

@ -408,6 +408,34 @@ static struct irq_chip mn10300_serial_pic = {
.irq_unmask = mn10300_serial_nop,
};
static void mn10300_serial_low_mask(struct irq_data *d)
{
unsigned long flags;
u16 tmp;
flags = arch_local_cli_save();
GxICR(d->irq) = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL);
tmp = GxICR(d->irq); /* flush write buffer */
arch_local_irq_restore(flags);
}
static void mn10300_serial_low_unmask(struct irq_data *d)
{
unsigned long flags;
u16 tmp;
flags = arch_local_cli_save();
GxICR(d->irq) =
NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL) | GxICR_ENABLE;
tmp = GxICR(d->irq); /* flush write buffer */
arch_local_irq_restore(flags);
}
static struct irq_chip mn10300_serial_low_pic = {
.name = "mnserial-low",
.irq_mask = mn10300_serial_low_mask,
.irq_unmask = mn10300_serial_low_unmask,
};
/*
* serial virtual DMA interrupt jump table
@ -929,10 +957,8 @@ static int mn10300_serial_startup(struct uart_port *_port)
pint->port = port;
pint->vdma = mn10300_serial_vdma_tx_handler;
set_intr_level(port->rx_irq,
NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL));
set_intr_level(port->tx_irq,
NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL));
irq_set_chip(port->rx_irq, &mn10300_serial_low_pic);
irq_set_chip(port->tx_irq, &mn10300_serial_low_pic);
irq_set_chip(port->tm_irq, &mn10300_serial_pic);
if (request_irq(port->rx_irq, mn10300_serial_interrupt,