AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-25 01:21:01 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Browse Source 
Conflicts:
	drivers/net/ucc_geth.c
This commit is contained in:
David S. Miller 2009-03-23 13:35:04 -07:00
commit 8be7cdccac
11 changed files with 113 additions and 62 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
drivers/dca/dca-sysfs.c
View File

@ -1,3 +1,24 @@
/*
* Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* The full GNU General Public License is included in this distribution in the
* file called COPYING.
*/
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/device.h>

2
drivers/net/Kconfig
View File

@ -1051,7 +1051,7 @@ config NI65
config DNET
tristate "Dave ethernet support (DNET)"
depends on NET_ETHERNET
depends on NET_ETHERNET && HAS_IOMEM
select PHYLIB
help
The Dave ethernet interface (DNET) is found on Qong Board FPGA.

1
drivers/net/benet/be.h
View File

@ -194,6 +194,7 @@ struct be_adapter {
struct be_eq_obj rx_eq;
struct be_rx_obj rx_obj;
u32 big_page_size; /* Compounded page size shared by rx wrbs */
bool rx_post_starved; /* Zero rx frags have been posted to BE */
struct vlan_group *vlan_grp;
u16 num_vlans;

60
drivers/net/benet/be_main.c
View File

@ -273,26 +273,6 @@ static void be_rx_eqd_update(struct be_adapter *adapter)
rx_eq->cur_eqd = eqd;
}
static void be_worker(struct work_struct *work)
{
struct be_adapter *adapter =
container_of(work, struct be_adapter, work.work);
int status;
/* Check link */
be_link_status_update(adapter);
/* Get Stats */
status = be_cmd_get_stats(&adapter->ctrl, &adapter->stats.cmd);
if (!status)
netdev_stats_update(adapter);
/* Set EQ delay */
be_rx_eqd_update(adapter);
schedule_delayed_work(&adapter->work, msecs_to_jiffies(1000));
}
static struct net_device_stats *be_get_stats(struct net_device *dev)
{
struct be_adapter *adapter = netdev_priv(dev);
@ -493,7 +473,7 @@ static int be_change_mtu(struct net_device *netdev, int new_mtu)
* program them in BE. If more than BE_NUM_VLANS_SUPPORTED are configured,
* set the BE in promiscuous VLAN mode.
*/
static void be_vids_config(struct net_device *netdev)
static void be_vid_config(struct net_device *netdev)
{
struct be_adapter *adapter = netdev_priv(netdev);
u16 vtag[BE_NUM_VLANS_SUPPORTED];
@ -536,7 +516,7 @@ static void be_vlan_add_vid(struct net_device *netdev, u16 vid)
adapter->num_vlans++;
adapter->vlan_tag[vid] = 1;
be_vids_config(netdev);
be_vid_config(netdev);
}
static void be_vlan_rem_vid(struct net_device *netdev, u16 vid)
@ -547,7 +527,7 @@ static void be_vlan_rem_vid(struct net_device *netdev, u16 vid)
adapter->vlan_tag[vid] = 0;
vlan_group_set_device(adapter->vlan_grp, vid, NULL);
be_vids_config(netdev);
be_vid_config(netdev);
}
static void be_set_multicast_filter(struct net_device *netdev)
@ -900,8 +880,11 @@ static void be_post_rx_frags(struct be_adapter *adapter)
page_info->last_page_user = true;
if (posted) {
be_rxq_notify(&adapter->ctrl, rxq->id, posted);
atomic_add(posted, &rxq->used);
be_rxq_notify(&adapter->ctrl, rxq->id, posted);
} else if (atomic_read(&rxq->used) == 0) {
/* Let be_worker replenish when memory is available */
adapter->rx_post_starved = true;
}
return;
@ -1305,6 +1288,31 @@ int be_poll_tx(struct napi_struct *napi, int budget)
return 1;
}
static void be_worker(struct work_struct *work)
{
struct be_adapter *adapter =
container_of(work, struct be_adapter, work.work);
int status;
/* Check link */
be_link_status_update(adapter);
/* Get Stats */
status = be_cmd_get_stats(&adapter->ctrl, &adapter->stats.cmd);
if (!status)
netdev_stats_update(adapter);
/* Set EQ delay */
be_rx_eqd_update(adapter);
if (adapter->rx_post_starved) {
adapter->rx_post_starved = false;
be_post_rx_frags(adapter);
}
schedule_delayed_work(&adapter->work, msecs_to_jiffies(1000));
}
static void be_msix_enable(struct be_adapter *adapter)
{
int i, status;
@ -1422,6 +1430,8 @@ static int be_open(struct net_device *netdev)
if (status != 0)
goto do_none;
be_vid_config(netdev);
status = be_cmd_set_flow_control(ctrl, true, true);
if (status != 0)
goto if_destroy;
@ -1856,8 +1866,6 @@ static int be_resume(struct pci_dev *pdev)
pci_set_power_state(pdev, 0);
pci_restore_state(pdev);
be_vids_config(netdev);
if (netif_running(netdev)) {
rtnl_lock();
be_open(netdev);

6
drivers/net/dm9000.c
View File

@ -930,13 +930,15 @@ static irqreturn_t dm9000_interrupt(int irq, void *dev_id)
struct net_device *dev = dev_id;
board_info_t *db = netdev_priv(dev);
int int_status;
unsigned long flags;
u8 reg_save;
dm9000_dbg(db, 3, "entering %s\n", __func__);
/* A real interrupt coming */
spin_lock(&db->lock);
/* holders of db->lock must always block IRQs */
spin_lock_irqsave(&db->lock, flags);
/* Save previous register address */
reg_save = readb(db->io_addr);
@ -972,7 +974,7 @@ static irqreturn_t dm9000_interrupt(int irq, void *dev_id)
/* Restore previous register address */
writeb(reg_save, db->io_addr);
spin_unlock(&db->lock);
spin_unlock_irqrestore(&db->lock, flags);
return IRQ_HANDLED;
}

6
drivers/net/dnet.c
View File

@ -279,11 +279,11 @@ static int dnet_mii_probe(struct net_device *dev)
/* attach the mac to the phy */
if (bp->capabilities & DNET_HAS_RMII) {
phydev = phy_connect(dev, phydev->dev.bus_id,
phydev = phy_connect(dev, dev_name(&phydev->dev),
&dnet_handle_link_change, 0,
PHY_INTERFACE_MODE_RMII);
} else {
phydev = phy_connect(dev, phydev->dev.bus_id,
phydev = phy_connect(dev, dev_name(&phydev->dev),
&dnet_handle_link_change, 0,
PHY_INTERFACE_MODE_MII);
}
@ -926,7 +926,7 @@ static int __devinit dnet_probe(struct platform_device *pdev)
phydev = bp->phy_dev;
dev_info(&pdev->dev, "attached PHY driver [%s] "
"(mii_bus:phy_addr=%s, irq=%d)\n",
phydev->drv->name, phydev->dev.bus_id, phydev->irq);
phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
return 0;

9
drivers/net/sungem.c
View File

@ -2998,8 +2998,11 @@ static const struct net_device_ops gem_netdev_ops = {
.ndo_do_ioctl = gem_ioctl,
.ndo_tx_timeout = gem_tx_timeout,
.ndo_change_mtu = gem_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = gem_set_mac_address,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = gem_poll_controller,
#endif
};
static int __devinit gem_init_one(struct pci_dev *pdev,
@ -3161,10 +3164,6 @@ static int __devinit gem_init_one(struct pci_dev *pdev,
dev->watchdog_timeo = 5 * HZ;
dev->irq = pdev->irq;
dev->dma = 0;
dev->set_mac_address = gem_set_mac_address;
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = gem_poll_controller;
#endif
/* Set that now, in case PM kicks in now */
pci_set_drvdata(pdev, dev);

36
drivers/net/ucc_geth.c
View File

@ -1536,32 +1536,15 @@ static void adjust_link(struct net_device *dev)
static int init_phy(struct net_device *dev)
{
struct ucc_geth_private *priv = netdev_priv(dev);
struct device_node *np = priv->node;
struct device_node *phy, *mdio;
const phandle *ph;
char bus_name[MII_BUS_ID_SIZE];
const unsigned int *id;
struct ucc_geth_info *ug_info = priv->ug_info;
struct phy_device *phydev;
char phy_id[BUS_ID_SIZE];
priv->oldlink = 0;
priv->oldspeed = 0;
priv->oldduplex = -1;
ph = of_get_property(np, "phy-handle", NULL);
phy = of_find_node_by_phandle(*ph);
mdio = of_get_parent(phy);
id = of_get_property(phy, "reg", NULL);
of_node_put(phy);
of_node_put(mdio);
fsl_pq_mdio_bus_name(bus_name, mdio);
snprintf(phy_id, sizeof(phy_id), "%s:%02x",
bus_name, *id);
phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface);
phydev = phy_connect(dev, ug_info->phy_bus_id, &adjust_link, 0,
priv->phy_interface);
if (IS_ERR(phydev)) {
printk("%s: Could not attach to PHY\n", dev->name);
@ -3629,10 +3612,12 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
fixed_link = of_get_property(np, "fixed-link", NULL);
if (fixed_link) {
snprintf(ug_info->mdio_bus, MII_BUS_ID_SIZE, "0");
ug_info->phy_address = fixed_link[0];
snprintf(ug_info->phy_bus_id, sizeof(ug_info->phy_bus_id),
PHY_ID_FMT, "0", fixed_link[0]);
phy = NULL;
} else {
char bus_name[MII_BUS_ID_SIZE];
ph = of_get_property(np, "phy-handle", NULL);
phy = of_find_node_by_phandle(*ph);
@ -3643,7 +3628,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
prop = of_get_property(phy, "reg", NULL);
if (prop == NULL)
return -1;
ug_info->phy_address = *prop;
/* Set the bus id */
mdio = of_get_parent(phy);
@ -3657,8 +3641,14 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
if (err)
return -1;
<<<<<<< HEAD:drivers/net/ucc_geth.c
snprintf(ug_info->mdio_bus, MII_BUS_ID_SIZE, "%x",
res.start&0xfffff);
=======
uec_mdio_bus_name(bus_name, mdio);
snprintf(ug_info->phy_bus_id, sizeof(ug_info->phy_bus_id),
"%s:%02x", bus_name, *prop);
>>>>>>> 61fa9dcf9329cb92c220f7b656410fbe5e72f933:drivers/net/ucc_geth.c
}
/* get the phy interface type, or default to MII */

3
drivers/net/ucc_geth.h
View File

@ -1101,8 +1101,7 @@ struct ucc_geth_info {
u32 eventRegMask;
u16 pausePeriod;
u16 extensionField;
u8 phy_address;
char mdio_bus[MII_BUS_ID_SIZE];
char phy_bus_id[BUS_ID_SIZE];
u8 weightfactor[NUM_TX_QUEUES];
u8 interruptcoalescingmaxvalue[NUM_RX_QUEUES];
u8 l2qt[UCC_GETH_VLAN_PRIORITY_MAX];

20
include/linux/dca.h
View File

@ -1,3 +1,23 @@
/*
* Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* The full GNU General Public License is included in this distribution in the
* file called COPYING.
*/
#ifndef DCA_H
#define DCA_H
/* DCA Provider API */

11
net/wireless/nl80211.c
View File

@ -1950,6 +1950,11 @@ static int nl80211_get_mesh_params(struct sk_buff *skb,
if (err)
return err;
if (!drv->ops->get_mesh_params) {
err = -EOPNOTSUPP;
goto out;
}
/* Get the mesh params */
rtnl_lock();
err = drv->ops->get_mesh_params(&drv->wiphy, dev, &cur_params);
@ -2059,6 +2064,11 @@ static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info)
if (err)
return err;
if (!drv->ops->set_mesh_params) {
err = -EOPNOTSUPP;
goto out;
}
/* This makes sure that there aren't more than 32 mesh config
* parameters (otherwise our bitfield scheme would not work.) */
BUILD_BUG_ON(NL80211_MESHCONF_ATTR_MAX > 32);
@ -2103,6 +2113,7 @@ static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info)
err = drv->ops->set_mesh_params(&drv->wiphy, dev, &cfg, mask);
rtnl_unlock();
out:
/* cleanup */
cfg80211_put_dev(drv);
dev_put(dev);