AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-14 17:36:44 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

arm64: dts: qcom: msm8998: Fixup uart3 gpio config for bluetooth

Browse Source 
It turns out that the wcn3990 can float the gpio lines during bootup, etc
which will result in the uart core thinking there is incoming data.  This
results in the bluetooth stack getting garbage.  By applying a bias to
match what wcn3990 would drive, the issue is corrected.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20191021161921.31825-1-jeffrey.l.hugo@gmail.com
[bjorn: Moved board specific pinctrl states to the end]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This commit is contained in:
Jeffrey Hugo 2019-10-21 09:19:21 -07:00 committed by Bjorn Andersson
parent 39523c56b6
commit 8529728f25
3 changed files with 67 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
View File

@ -301,3 +301,26 @@ &wifi {
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
}; };
/* PINCTRL - board-specific pinctrl */
&blsp1_uart3_on {
rx {
/delete-property/ bias-disable;
/*
* Configure a pull-up on 45 (RX). This is needed to
* avoid garbage data when the TX pin of the Bluetooth
* module is in tri-state (module powered off or not
* driving the signal yet).
*/
bias-pull-up;
};
cts {
/delete-property/ bias-disable;
/*
* Configure a pull-down on 47 (CTS) to match the pull
* of the Bluetooth module.
*/
bias-pull-down;
};
};

23
arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
View File

@ -373,3 +373,26 @@ &wifi {
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
}; };
/* PINCTRL - board-specific pinctrl */
&blsp1_uart3_on {
rx {
/delete-property/ bias-disable;
/*
* Configure a pull-up on 45 (RX). This is needed to
* avoid garbage data when the TX pin of the Bluetooth
* module is in tri-state (module powered off or not
* driving the signal yet).
*/
bias-pull-up;
};
cts {
/delete-property/ bias-disable;
/*
* Configure a pull-down on 47 (CTS) to match the pull
* of the Bluetooth module.
*/
bias-pull-down;
};
};

25
arch/arm64/boot/dts/qcom/msm8998-pins.dtsi
View File

@ -77,13 +77,30 @@ config {
}; };
blsp1_uart3_on: blsp1_uart3_on { blsp1_uart3_on: blsp1_uart3_on {
mux { tx {
pins = "gpio45", "gpio46", "gpio47", "gpio48"; pins = "gpio45";
function = "blsp_uart3_a"; function = "blsp_uart3_a";
drive-strength = <2>;
bias-disable;
}; };
config { rx {
pins = "gpio45", "gpio46", "gpio47", "gpio48"; pins = "gpio46";
function = "blsp_uart3_a";
drive-strength = <2>;
bias-disable;
};
cts {
pins = "gpio47";
function = "blsp_uart3_a";
drive-strength = <2>;
bias-disable;
};
rfr {
pins = "gpio48";
function = "blsp_uart3_a";
drive-strength = <2>; drive-strength = <2>;
bias-disable; bias-disable;
}; };