diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c
index 9f5aee7de686..f0cba7b5758b 100644
--- a/sound/soc/codecs/nau8825.c
+++ b/sound/soc/codecs/nau8825.c
@@ -251,7 +251,7 @@ static const unsigned short logtable[256] = {
  *
  * Acquires the semaphore without jiffies. Try to acquire the semaphore
  * atomically. Returns 0 if the semaphore has been acquired successfully
- * or 1 if it it cannot be acquired.
+ * or 1 if it cannot be acquired.
  */
 static int nau8825_sema_acquire(struct nau8825 *nau8825, long timeout)
 {
diff --git a/sound/soc/codecs/tas5086.c b/sound/soc/codecs/tas5086.c
index 0250b94c8f65..7831c96d0d83 100644
--- a/sound/soc/codecs/tas5086.c
+++ b/sound/soc/codecs/tas5086.c
@@ -487,7 +487,7 @@ static int tas5086_init(struct device *dev, struct tas5086_private *priv)
 	/*
 	 * If any of the channels is configured to start in Mid-Z mode,
 	 * configure 'part 1' of the PWM starts to use Mid-Z, and tell
-	 * all configured mid-z channels to start start under 'part 1'.
+	 * all configured mid-z channels to start under 'part 1'.
 	 */
 	if (priv->pwm_start_mid_z)
 		regmap_write(priv->regmap, TAS5086_PWM_START,
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index 7072ffacbdfd..f333e2ff4a16 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -755,7 +755,7 @@ static void pll_factors(struct snd_soc_component *component,
 	u64 Kpart;
 	unsigned int K, Ndiv, Nmod, target;
 
-	/* The the PLL output is always 98.304MHz. */
+	/* The PLL output is always 98.304MHz. */
 	target = 98304000;
 
 	/* If the input frequency is over 14.4MHz then scale it down. */