Merge 5.0-rc4 into tty-next

We need the tty and serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-05 04:56:46 +07:00 · 2019-01-28 08:22:00 +01:00 · 2019-01-28 08:22:00 +01:00 · 83b21ed0fc
commit 83b21ed0fc
parent c3fee60908 f17b5f06cb
723 changed files with 7762 additions and 3867 deletions
--- a/.clang-format
+++ b/.clang-format
@ -72,6 +72,10 @@ ForEachMacros:
  - 'apei_estatus_for_each_section'
  - 'ata_for_each_dev'
  - 'ata_for_each_link'
+  - '__ata_qc_for_each'
+  - 'ata_qc_for_each'
+  - 'ata_qc_for_each_raw'
+  - 'ata_qc_for_each_with_internal'
  - 'ax25_for_each'
  - 'ax25_uid_for_each'
  - 'bio_for_each_integrity_vec'
@ -85,6 +89,7 @@ ForEachMacros:
  - 'blk_queue_for_each_rl'
  - 'bond_for_each_slave'
  - 'bond_for_each_slave_rcu'
+  - 'bpf_for_each_spilled_reg'
  - 'btree_for_each_safe128'
  - 'btree_for_each_safe32'
  - 'btree_for_each_safe64'
@ -103,6 +108,8 @@ ForEachMacros:
  - 'drm_atomic_crtc_for_each_plane'
  - 'drm_atomic_crtc_state_for_each_plane'
  - 'drm_atomic_crtc_state_for_each_plane_state'
+  - 'drm_atomic_for_each_plane_damage'
+  - 'drm_connector_for_each_possible_encoder'
  - 'drm_for_each_connector_iter'
  - 'drm_for_each_crtc'
  - 'drm_for_each_encoder'
@ -121,11 +128,21 @@ ForEachMacros:
  - 'for_each_bio'
  - 'for_each_board_func_rsrc'
  - 'for_each_bvec'
+  - 'for_each_card_components'
+  - 'for_each_card_links'
+  - 'for_each_card_links_safe'
+  - 'for_each_card_prelinks'
+  - 'for_each_card_rtds'
+  - 'for_each_card_rtds_safe'
+  - 'for_each_cgroup_storage_type'
  - 'for_each_child_of_node'
  - 'for_each_clear_bit'
  - 'for_each_clear_bit_from'
  - 'for_each_cmsghdr'
  - 'for_each_compatible_node'
+  - 'for_each_component_dais'
+  - 'for_each_component_dais_safe'
+  - 'for_each_comp_order'
  - 'for_each_console'
  - 'for_each_cpu'
  - 'for_each_cpu_and'
@ -133,6 +150,10 @@ ForEachMacros:
  - 'for_each_cpu_wrap'
  - 'for_each_dev_addr'
  - 'for_each_dma_cap_mask'
+  - 'for_each_dpcm_be'
+  - 'for_each_dpcm_be_rollback'
+  - 'for_each_dpcm_be_safe'
+  - 'for_each_dpcm_fe'
  - 'for_each_drhd_unit'
  - 'for_each_dss_dev'
  - 'for_each_efi_memory_desc'
@ -149,6 +170,7 @@ ForEachMacros:
  - 'for_each_iommu'
  - 'for_each_ip_tunnel_rcu'
  - 'for_each_irq_nr'
+  - 'for_each_link_codecs'
  - 'for_each_lru'
  - 'for_each_matching_node'
  - 'for_each_matching_node_and_match'
@ -160,6 +182,7 @@ ForEachMacros:
  - 'for_each_mem_range_rev'
  - 'for_each_migratetype_order'
  - 'for_each_msi_entry'
+  - 'for_each_msi_entry_safe'
  - 'for_each_net'
  - 'for_each_netdev'
  - 'for_each_netdev_continue'
@ -183,12 +206,14 @@ ForEachMacros:
  - 'for_each_node_with_property'
  - 'for_each_of_allnodes'
  - 'for_each_of_allnodes_from'
+  - 'for_each_of_cpu_node'
  - 'for_each_of_pci_range'
  - 'for_each_old_connector_in_state'
  - 'for_each_old_crtc_in_state'
  - 'for_each_oldnew_connector_in_state'
  - 'for_each_oldnew_crtc_in_state'
  - 'for_each_oldnew_plane_in_state'
+  - 'for_each_oldnew_plane_in_state_reverse'
  - 'for_each_oldnew_private_obj_in_state'
  - 'for_each_old_plane_in_state'
  - 'for_each_old_private_obj_in_state'
@ -206,14 +231,17 @@ ForEachMacros:
  - 'for_each_process'
  - 'for_each_process_thread'
  - 'for_each_property_of_node'
+  - 'for_each_registered_fb'
  - 'for_each_reserved_mem_region'
-  - 'for_each_resv_unavail_range'
+  - 'for_each_rtd_codec_dai'
+  - 'for_each_rtd_codec_dai_rollback'
  - 'for_each_rtdcom'
  - 'for_each_rtdcom_safe'
  - 'for_each_set_bit'
  - 'for_each_set_bit_from'
  - 'for_each_sg'
  - 'for_each_sg_page'
+  - 'for_each_sibling_event'
  - '__for_each_thread'
  - 'for_each_thread'
  - 'for_each_zone'
@ -251,6 +279,8 @@ ForEachMacros:
  - 'hlist_nulls_for_each_entry_from'
  - 'hlist_nulls_for_each_entry_rcu'
  - 'hlist_nulls_for_each_entry_safe'
+  - 'i3c_bus_for_each_i2cdev'
+  - 'i3c_bus_for_each_i3cdev'
  - 'ide_host_for_each_port'
  - 'ide_port_for_each_dev'
  - 'ide_port_for_each_present_dev'
@ -267,11 +297,14 @@ ForEachMacros:
  - 'kvm_for_each_memslot'
  - 'kvm_for_each_vcpu'
  - 'list_for_each'
+  - 'list_for_each_codec'
+  - 'list_for_each_codec_safe'
  - 'list_for_each_entry'
  - 'list_for_each_entry_continue'
  - 'list_for_each_entry_continue_rcu'
  - 'list_for_each_entry_continue_reverse'
  - 'list_for_each_entry_from'
+  - 'list_for_each_entry_from_rcu'
  - 'list_for_each_entry_from_reverse'
  - 'list_for_each_entry_lockless'
  - 'list_for_each_entry_rcu'
@ -291,6 +324,7 @@ ForEachMacros:
  - 'media_device_for_each_intf'
  - 'media_device_for_each_link'
  - 'media_device_for_each_pad'
+  - 'nanddev_io_for_each_page'
  - 'netdev_for_each_lower_dev'
  - 'netdev_for_each_lower_private'
  - 'netdev_for_each_lower_private_rcu'
@ -357,12 +391,14 @@ ForEachMacros:
  - 'sk_nulls_for_each'
  - 'sk_nulls_for_each_from'
  - 'sk_nulls_for_each_rcu'
+  - 'snd_array_for_each'
  - 'snd_pcm_group_for_each_entry'
  - 'snd_soc_dapm_widget_for_each_path'
  - 'snd_soc_dapm_widget_for_each_path_safe'
  - 'snd_soc_dapm_widget_for_each_sink_path'
  - 'snd_soc_dapm_widget_for_each_source_path'
  - 'tb_property_for_each'
+  - 'tcf_exts_for_each_action'
  - 'udp_portaddr_for_each_entry'
  - 'udp_portaddr_for_each_entry_rcu'
  - 'usb_hub_for_each_child'
@ -371,6 +407,11 @@ ForEachMacros:
  - 'v4l2_m2m_for_each_dst_buf_safe'
  - 'v4l2_m2m_for_each_src_buf'
  - 'v4l2_m2m_for_each_src_buf_safe'
+  - 'virtio_device_for_each_vq'
+  - 'xa_for_each'
+  - 'xas_for_each'
+  - 'xas_for_each_conflict'
+  - 'xas_for_each_marked'
  - 'zorro_for_each_dev'

 #IncludeBlocks: Preserve # Unknown to clang-format-5.0
--- a/Documentation/bpf/bpf_design_QA.rst
+++ b/Documentation/bpf/bpf_design_QA.rst
@ -157,12 +157,11 @@ Q: Does BPF have a stable ABI?
 ------------------------------
 A: YES. BPF instructions, arguments to BPF programs, set of helper
 functions and their arguments, recognized return codes are all part
-of ABI. However when tracing programs are using bpf_probe_read() helper
-to walk kernel internal datastructures and compile with kernel
-internal headers these accesses can and will break with newer
-kernels. The union bpf_attr -> kern_version is checked at load time
-to prevent accidentally loading kprobe-based bpf programs written
-for a different kernel. Networking programs don't do kern_version check.
+of ABI. However there is one specific exception to tracing programs
+which are using helpers like bpf_probe_read() to walk kernel internal
+data structures and compile with kernel internal headers. Both of these
+kernel internals are subject to change and can break with newer kernels
+such that the program needs to be adapted accordingly.

 Q: How much stack space a BPF program uses?
 -------------------------------------------
--- a/Documentation/core-api/xarray.rst
+++ b/Documentation/core-api/xarray.rst
@ -108,12 +108,13 @@ some, but not all of the other indices changing.

 Sometimes you need to ensure that a subsequent call to :c:func:`xa_store`
 will not need to allocate memory.  The :c:func:`xa_reserve` function
-will store a reserved entry at the indicated index.  Users of the normal
-API will see this entry as containing ``NULL``.  If you do not need to
-use the reserved entry, you can call :c:func:`xa_release` to remove the
-unused entry.  If another user has stored to the entry in the meantime,
-:c:func:`xa_release` will do nothing; if instead you want the entry to
-become ``NULL``, you should use :c:func:`xa_erase`.
+will store a reserved entry at the indicated index.  Users of the
+normal API will see this entry as containing ``NULL``.  If you do
+not need to use the reserved entry, you can call :c:func:`xa_release`
+to remove the unused entry.  If another user has stored to the entry
+in the meantime, :c:func:`xa_release` will do nothing; if instead you
+want the entry to become ``NULL``, you should use :c:func:`xa_erase`.
+Using :c:func:`xa_insert` on a reserved entry will fail.

 If all entries in the array are ``NULL``, the :c:func:`xa_empty` function
 will return ``true``.
@ -183,6 +184,8 @@ Takes xa_lock internally:
 * :c:func:`xa_store_bh`
 * :c:func:`xa_store_irq`
 * :c:func:`xa_insert`
+ * :c:func:`xa_insert_bh`
+ * :c:func:`xa_insert_irq`
 * :c:func:`xa_erase`
 * :c:func:`xa_erase_bh`
 * :c:func:`xa_erase_irq`
--- a/Documentation/devicetree/bindings/arm/cpu-capacity.txt
+++ b/Documentation/devicetree/bindings/arm/cpu-capacity.txt
@ -235,4 +235,4 @@ cpus {
 ===========================================

 [1] ARM Linux Kernel documentation - CPUs bindings
-    Documentation/devicetree/bindings/arm/cpus.txt
+    Documentation/devicetree/bindings/arm/cpus.yaml
--- a/Documentation/devicetree/bindings/arm/idle-states.txt
+++ b/Documentation/devicetree/bindings/arm/idle-states.txt
@ -684,7 +684,7 @@ cpus {
 ===========================================

 [1] ARM Linux Kernel documentation - CPUs bindings
-    Documentation/devicetree/bindings/arm/cpus.txt
+    Documentation/devicetree/bindings/arm/cpus.yaml

 [2] ARM Linux Kernel documentation - PSCI bindings
    Documentation/devicetree/bindings/arm/psci.txt
--- a/Documentation/devicetree/bindings/arm/sp810.txt
+++ b/Documentation/devicetree/bindings/arm/sp810.txt
@ -4,7 +4,7 @@ SP810 System Controller
 Required properties:

 - compatible:	standard compatible string for a Primecell peripheral,
-		see Documentation/devicetree/bindings/arm/primecell.txt
+		see Documentation/devicetree/bindings/arm/primecell.yaml
 		for more details
 		should be: "arm,sp810", "arm,primecell"

--- a/Documentation/devicetree/bindings/arm/topology.txt
+++ b/Documentation/devicetree/bindings/arm/topology.txt
@ -472,4 +472,4 @@ cpus {

 ===============================================================================
 [1] ARM Linux kernel documentation
-    Documentation/devicetree/bindings/arm/cpus.txt
+    Documentation/devicetree/bindings/arm/cpus.yaml
--- a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt
+++ b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt
@ -18,4 +18,4 @@ Required Properties:
 Each clock is assigned an identifier and client nodes use this identifier
 to specify the clock which they consume.

-All these identifier could be found in <dt-bindings/clock/marvell-mmp2.h>.
+All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>.
--- a/Documentation/devicetree/bindings/display/arm,pl11x.txt
+++ b/Documentation/devicetree/bindings/display/arm,pl11x.txt
@ -1,6 +1,6 @@
 * ARM PrimeCell Color LCD Controller PL110/PL111

-See also Documentation/devicetree/bindings/arm/primecell.txt
+See also Documentation/devicetree/bindings/arm/primecell.yaml

 Required properties:

--- a/Documentation/devicetree/bindings/display/msm/gpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
@ -27,7 +27,6 @@ Example:
 		reg = <0x04300000 0x20000>;
 		reg-names = "kgsl_3d0_reg_memory";
 		interrupts = <GIC_SPI 80 0>;
-		interrupt-names = "kgsl_3d0_irq";
 		clock-names =
 		    "core",
 		    "iface",
--- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
@ -14,8 +14,6 @@ Required properties:

    "marvell,armada-8k-gpio" should be used for the Armada 7K and 8K
    SoCs (either from AP or CP), see
-    Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
-    and
    Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
    for specific details about the offset property.

--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
@ -78,7 +78,7 @@ Sub-nodes:
 PPI affinity can be expressed as a single "ppi-partitions" node,
 containing a set of sub-nodes, each with the following property:
 - affinity: Should be a list of phandles to CPU nodes (as described in
-Documentation/devicetree/bindings/arm/cpus.txt).
+  Documentation/devicetree/bindings/arm/cpus.yaml).

 GICv3 has one or more Interrupt Translation Services (ITS) that are
 used to route Message Signalled Interrupts (MSI) to the CPUs.
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
@ -55,7 +55,7 @@ of these nodes are defined by the individual bindings for the specific function
 = EXAMPLE
 The following example represents the GLINK RPM node on a MSM8996 device, with
 the function for the "rpm_request" channel defined, which is used for
-regualtors and root clocks.
+regulators and root clocks.

 	apcs_glb: mailbox@9820000 {
 		compatible = "qcom,msm8996-apcs-hmss-global";
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
@ -41,12 +41,12 @@ processor ID) and a string identifier.
 - qcom,local-pid:
 	Usage: required
 	Value type: <u32>
-	Definition: specifies the identfier of the local endpoint of this edge
+	Definition: specifies the identifier of the local endpoint of this edge

 - qcom,remote-pid:
 	Usage: required
 	Value type: <u32>
-	Definition: specifies the identfier of the remote endpoint of this edge
+	Definition: specifies the identifier of the remote endpoint of this edge

 = SUBNODES
 Each SMP2P pair contain a set of inbound and outbound entries, these are
--- a/Documentation/fb/fbcon.txt
+++ b/Documentation/fb/fbcon.txt
@ -163,6 +163,14 @@ C. Boot options
 	be preserved until there actually is some text is output to the console.
 	This option causes fbcon to bind immediately to the fbdev device.

+7. fbcon=logo-pos:<location>
+
+	The only possible 'location' is 'center' (without quotes), and when
+	given, the bootup logo is moved from the default top-left corner
+	location to the center of the framebuffer. If more than one logo is
+	displayed due to multiple CPUs, the collected line of logos is moved
+	as a whole.
+
 C. Attaching, Detaching and Unloading

 Before going on to how to attach, detach and unload the framebuffer console, an
--- a/Documentation/networking/index.rst
+++ b/Documentation/networking/index.rst
@ -11,19 +11,19 @@ Contents:
   batman-adv
   can
   can_ucan_protocol
-   dpaa2/index
-   e100
-   e1000
-   e1000e
-   fm10k
-   igb
-   igbvf
-   ixgb
-   ixgbe
-   ixgbevf
-   i40e
-   iavf
-   ice
+   device_drivers/freescale/dpaa2/index
+   device_drivers/intel/e100
+   device_drivers/intel/e1000
+   device_drivers/intel/e1000e
+   device_drivers/intel/fm10k
+   device_drivers/intel/igb
+   device_drivers/intel/igbvf
+   device_drivers/intel/ixgb
+   device_drivers/intel/ixgbe
+   device_drivers/intel/ixgbevf
+   device_drivers/intel/i40e
+   device_drivers/intel/iavf
+   device_drivers/intel/ice
   kapi
   z8530book
   msg_zerocopy
--- a/Documentation/networking/rxrpc.txt
+++ b/Documentation/networking/rxrpc.txt
@ -1000,51 +1000,6 @@ The kernel interface functions are as follows:
     size should be set when the call is begun.  tx_total_len may not be less
     than zero.

- (*) Check to see the completion state of a call so that the caller can assess
-     whether it needs to be retried.
-
-	enum rxrpc_call_completion {
-		RXRPC_CALL_SUCCEEDED,
-		RXRPC_CALL_REMOTELY_ABORTED,
-		RXRPC_CALL_LOCALLY_ABORTED,
-		RXRPC_CALL_LOCAL_ERROR,
-		RXRPC_CALL_NETWORK_ERROR,
-	};
-
-	int rxrpc_kernel_check_call(struct socket *sock, struct rxrpc_call *call,
-				    enum rxrpc_call_completion *_compl,
-				    u32 *_abort_code);
-
-     On return, -EINPROGRESS will be returned if the call is still ongoing; if
-     it is finished, *_compl will be set to indicate the manner of completion,
-     *_abort_code will be set to any abort code that occurred.  0 will be
-     returned on a successful completion, -ECONNABORTED will be returned if the
-     client failed due to a remote abort and anything else will return an
-     appropriate error code.
-
-     The caller should look at this information to decide if it's worth
-     retrying the call.
-
- (*) Retry a client call.
-
-	int rxrpc_kernel_retry_call(struct socket *sock,
-				    struct rxrpc_call *call,
-				    struct sockaddr_rxrpc *srx,
-				    struct key *key);
-
-     This attempts to partially reinitialise a call and submit it again while
-     reusing the original call's Tx queue to avoid the need to repackage and
-     re-encrypt the data to be sent.  call indicates the call to retry, srx the
-     new address to send it to and key the encryption key to use for signing or
-     encrypting the packets.
-
-     For this to work, the first Tx data packet must still be in the transmit
-     queue, and currently this is only permitted for local and network errors
-     and the call must not have been aborted.  Any partially constructed Tx
-     packet is left as is and can continue being filled afterwards.
-
-     It returns 0 if the call was requeued and an error otherwise.
-
 (*) Get call RTT.

 	u64 rxrpc_kernel_get_rtt(struct socket *sock, struct rxrpc_call *call);
--- a/Documentation/networking/snmp_counter.rst
+++ b/Documentation/networking/snmp_counter.rst
@ -336,7 +336,26 @@ time client replies ACK, this socket will get another chance to move
 to the accept queue.


-TCP Fast Open
+* TcpEstabResets
+Defined in `RFC1213 tcpEstabResets`_.
+
+.. _RFC1213 tcpEstabResets: https://tools.ietf.org/html/rfc1213#page-48
+
+* TcpAttemptFails
+Defined in `RFC1213 tcpAttemptFails`_.
+
+.. _RFC1213 tcpAttemptFails: https://tools.ietf.org/html/rfc1213#page-48
+
+* TcpOutRsts
+Defined in `RFC1213 tcpOutRsts`_. The RFC says this counter indicates
+the 'segments sent containing the RST flag', but in linux kernel, this
+couner indicates the segments kerenl tried to send. The sending
+process might be failed due to some errors (e.g. memory alloc failed).
+
+.. _RFC1213 tcpOutRsts: https://tools.ietf.org/html/rfc1213#page-52
+
+
+TCP Fast Path
 ============
 When kernel receives a TCP packet, it has two paths to handler the
 packet, one is fast path, another is slow path. The comment in kernel
@ -383,8 +402,6 @@ increase 1.

 TCP abort
 ========
-
-
 * TcpExtTCPAbortOnData
 It means TCP layer has data in flight, but need to close the
 connection. So TCP layer sends a RST to the other side, indicate the
@ -545,7 +562,6 @@ packet yet, the sender would know packet 4 is out of order. The TCP
 stack of kernel will increase TcpExtTCPSACKReorder for both of the
 above scenarios.

-
 DSACK
 =====
 The DSACK is defined in `RFC2883`_. The receiver uses DSACK to report
@ -566,13 +582,63 @@ The TCP stack receives an out of order duplicate packet, so it sends a
 DSACK to the sender.

 * TcpExtTCPDSACKRecv
-The TCP stack receives a DSACK, which indicate an acknowledged
+The TCP stack receives a DSACK, which indicates an acknowledged
 duplicate packet is received.

 * TcpExtTCPDSACKOfoRecv
 The TCP stack receives a DSACK, which indicate an out of order
 duplicate packet is received.

+invalid SACK and DSACK
+====================
+When a SACK (or DSACK) block is invalid, a corresponding counter would
+be updated. The validation method is base on the start/end sequence
+number of the SACK block. For more details, please refer the comment
+of the function tcp_is_sackblock_valid in the kernel source code. A
+SACK option could have up to 4 blocks, they are checked
+individually. E.g., if 3 blocks of a SACk is invalid, the
+corresponding counter would be updated 3 times. The comment of the
+`Add counters for discarded SACK blocks`_ patch has additional
+explaination:
+
+.. _Add counters for discarded SACK blocks: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=18f02545a9a16c9a89778b91a162ad16d510bb32
+
+* TcpExtTCPSACKDiscard
+This counter indicates how many SACK blocks are invalid. If the invalid
+SACK block is caused by ACK recording, the TCP stack will only ignore
+it and won't update this counter.
+
+* TcpExtTCPDSACKIgnoredOld and TcpExtTCPDSACKIgnoredNoUndo
+When a DSACK block is invalid, one of these two counters would be
+updated. Which counter will be updated depends on the undo_marker flag
+of the TCP socket. If the undo_marker is not set, the TCP stack isn't
+likely to re-transmit any packets, and we still receive an invalid
+DSACK block, the reason might be that the packet is duplicated in the
+middle of the network. In such scenario, TcpExtTCPDSACKIgnoredNoUndo
+will be updated. If the undo_marker is set, TcpExtTCPDSACKIgnoredOld
+will be updated. As implied in its name, it might be an old packet.
+
+SACK shift
+=========
+The linux networking stack stores data in sk_buff struct (skb for
+short). If a SACK block acrosses multiple skb, the TCP stack will try
+to re-arrange data in these skb. E.g. if a SACK block acknowledges seq
+10 to 15, skb1 has seq 10 to 13, skb2 has seq 14 to 20. The seq 14 and
+15 in skb2 would be moved to skb1. This operation is 'shift'. If a
+SACK block acknowledges seq 10 to 20, skb1 has seq 10 to 13, skb2 has
+seq 14 to 20. All data in skb2 will be moved to skb1, and skb2 will be
+discard, this operation is 'merge'.
+
+* TcpExtTCPSackShifted
+A skb is shifted
+
+* TcpExtTCPSackMerged
+A skb is merged
+
+* TcpExtTCPSackShiftFallback
+A skb should be shifted or merged, but the TCP stack doesn't do it for
+some reasons.
+
 TCP out of order
 ===============
 * TcpExtTCPOFOQueue
@ -662,6 +728,60 @@ unacknowledged number (more strict than `RFC 5961 section 5.2`_).
 .. _RFC 5961 section 4.2: https://tools.ietf.org/html/rfc5961#page-9
 .. _RFC 5961 section 5.2: https://tools.ietf.org/html/rfc5961#page-11

+TCP receive window
+=================
+* TcpExtTCPWantZeroWindowAdv
+Depending on current memory usage, the TCP stack tries to set receive
+window to zero. But the receive window might still be a no-zero
+value. For example, if the previous window size is 10, and the TCP
+stack receives 3 bytes, the current window size would be 7 even if the
+window size calculated by the memory usage is zero.
+
+* TcpExtTCPToZeroWindowAdv
+The TCP receive window is set to zero from a no-zero value.
+
+* TcpExtTCPFromZeroWindowAdv
+The TCP receive window is set to no-zero value from zero.
+
+
+Delayed ACK
+==========
+The TCP Delayed ACK is a technique which is used for reducing the
+packet count in the network. For more details, please refer the
+`Delayed ACK wiki`_
+
+.. _Delayed ACK wiki: https://en.wikipedia.org/wiki/TCP_delayed_acknowledgment
+
+* TcpExtDelayedACKs
+A delayed ACK timer expires. The TCP stack will send a pure ACK packet
+and exit the delayed ACK mode.
+
+* TcpExtDelayedACKLocked
+A delayed ACK timer expires, but the TCP stack can't send an ACK
+immediately due to the socket is locked by a userspace program. The
+TCP stack will send a pure ACK later (after the userspace program
+unlock the socket). When the TCP stack sends the pure ACK later, the
+TCP stack will also update TcpExtDelayedACKs and exit the delayed ACK
+mode.
+
+* TcpExtDelayedACKLost
+It will be updated when the TCP stack receives a packet which has been
+ACKed. A Delayed ACK loss might cause this issue, but it would also be
+triggered by other reasons, such as a packet is duplicated in the
+network.
+
+Tail Loss Probe (TLP)
+===================
+TLP is an algorithm which is used to detect TCP packet loss. For more
+details, please refer the `TLP paper`_.
+
+.. _TLP paper: https://tools.ietf.org/html/draft-dukkipati-tcpm-tcp-loss-probe-01
+
+* TcpExtTCPLossProbes
+A TLP probe packet is sent.
+
+* TcpExtTCPLossProbeRecovery
+A packet loss is detected and recovered by TLP.

 examples
 =======
--- a/Documentation/networking/timestamping.txt
+++ b/Documentation/networking/timestamping.txt
@ -417,7 +417,7 @@ is again deprecated and ts[2] holds a hardware timestamp if set.

 Hardware time stamping must also be initialized for each device driver
 that is expected to do hardware time stamping. The parameter is defined in
-/include/linux/net_tstamp.h as:
+include/uapi/linux/net_tstamp.h as:

 struct hwtstamp_config {
 	int flags;	/* no flags defined right now, must be zero */
@ -487,7 +487,7 @@ enum {
 	HWTSTAMP_FILTER_PTP_V1_L4_EVENT,

 	/* for the complete list of values, please check
-	 * the include file /include/linux/net_tstamp.h
+	 * the include file include/uapi/linux/net_tstamp.h
 	 */
 };

--- a/52
+++ b/52
@ -3052,8 +3052,8 @@ F:	include/linux/bcm963xx_nvram.h
 F:	include/linux/bcm963xx_tag.h

 BROADCOM BNX2 GIGABIT ETHERNET DRIVER
-M:	Rasesh Mody <rasesh.mody@cavium.com>
-M:	Dept-GELinuxNICDev@cavium.com
+M:	Rasesh Mody <rmody@marvell.com>
+M:	GR-Linux-NIC-Dev@marvell.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2.*
@ -3072,9 +3072,9 @@ S:	Supported
 F:	drivers/scsi/bnx2i/

 BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
-M:	Ariel Elior <ariel.elior@cavium.com>
-M:	Sudarsana Kalluru <sudarsana.kalluru@cavium.com>
-M:	everest-linux-l2@cavium.com
+M:	Ariel Elior <aelior@marvell.com>
+M:	Sudarsana Kalluru <skalluru@marvell.com>
+M:	GR-everest-linux-l2@marvell.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2x/
@ -3249,9 +3249,9 @@ S:	Supported
 F:	drivers/scsi/bfa/

 BROCADE BNA 10 GIGABIT ETHERNET DRIVER
-M:	Rasesh Mody <rasesh.mody@cavium.com>
-M:	Sudarsana Kalluru <sudarsana.kalluru@cavium.com>
-M:	Dept-GELinuxNICDev@cavium.com
+M:	Rasesh Mody <rmody@marvell.com>
+M:	Sudarsana Kalluru <skalluru@marvell.com>
+M:	GR-Linux-NIC-Dev@marvell.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/brocade/bna/
@ -3471,10 +3471,9 @@ F:	drivers/i2c/busses/i2c-octeon*
 F:	drivers/i2c/busses/i2c-thunderx*

 CAVIUM LIQUIDIO NETWORK DRIVER
-M:	Derek Chickles <derek.chickles@caviumnetworks.com>
-M:	Satanand Burla <satananda.burla@caviumnetworks.com>
-M:	Felix Manlunas <felix.manlunas@caviumnetworks.com>
-M:	Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
+M:	Derek Chickles <dchickles@marvell.com>
+M:	Satanand Burla <sburla@marvell.com>
+M:	Felix Manlunas <fmanlunas@marvell.com>
 L:	netdev@vger.kernel.org
 W:	http://www.cavium.com
 S:	Supported
@ -3979,6 +3978,7 @@ F:	drivers/cpufreq/arm_big_little.c
 CPU POWER MONITORING SUBSYSTEM
 M:	Thomas Renninger <trenn@suse.com>
 M:	Shuah Khan <shuah@kernel.org>
+M:	Shuah Khan <skhan@linuxfoundation.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
 F:	tools/power/cpupower/
@ -8259,6 +8259,7 @@ F:	include/uapi/linux/sunrpc/

 KERNEL SELFTEST FRAMEWORK
 M:	Shuah Khan <shuah@kernel.org>
+M:	Shuah Khan <skhan@linuxfoundation.org>
 L:	linux-kselftest@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git
 Q:	https://patchwork.kernel.org/project/linux-kselftest/list/
@ -10689,9 +10690,9 @@ S:	Maintained
 F:	drivers/net/netdevsim/*

 NETXEN (1/10) GbE SUPPORT
-M:	Manish Chopra <manish.chopra@cavium.com>
-M:	Rahul Verma <rahul.verma@cavium.com>
-M:	Dept-GELinuxNICDev@cavium.com
+M:	Manish Chopra <manishc@marvell.com>
+M:	Rahul Verma <rahulv@marvell.com>
+M:	GR-Linux-NIC-Dev@marvell.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/qlogic/netxen/
@ -12475,8 +12476,8 @@ S:	Supported
 F:	drivers/scsi/qedi/

 QLOGIC QL4xxx ETHERNET DRIVER
-M:	Ariel Elior <Ariel.Elior@cavium.com>
-M:	everest-linux-l2@cavium.com
+M:	Ariel Elior <aelior@marvell.com>
+M:	GR-everest-linux-l2@marvell.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qed/
@ -12484,8 +12485,8 @@ F:	include/linux/qed/
 F:	drivers/net/ethernet/qlogic/qede/

 QLOGIC QL4xxx RDMA DRIVER
-M:	Michal Kalderon <Michal.Kalderon@cavium.com>
-M:	Ariel Elior <Ariel.Elior@cavium.com>
+M:	Michal Kalderon <mkalderon@marvell.com>
+M:	Ariel Elior <aelior@marvell.com>
 L:	linux-rdma@vger.kernel.org
 S:	Supported
 F:	drivers/infiniband/hw/qedr/
@ -12505,7 +12506,7 @@ F:	Documentation/scsi/LICENSE.qla2xxx
 F:	drivers/scsi/qla2xxx/

 QLOGIC QLA3XXX NETWORK DRIVER
-M:	Dept-GELinuxNICDev@cavium.com
+M:	GR-Linux-NIC-Dev@marvell.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	Documentation/networking/device_drivers/qlogic/LICENSE.qla3xxx
@ -12519,16 +12520,16 @@ F:	Documentation/scsi/LICENSE.qla4xxx
 F:	drivers/scsi/qla4xxx/

 QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
-M:	Shahed Shaikh <Shahed.Shaikh@cavium.com>
-M:	Manish Chopra <manish.chopra@cavium.com>
-M:	Dept-GELinuxNICDev@cavium.com
+M:	Shahed Shaikh <shshaikh@marvell.com>
+M:	Manish Chopra <manishc@marvell.com>
+M:	GR-Linux-NIC-Dev@marvell.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qlcnic/

 QLOGIC QLGE 10Gb ETHERNET DRIVER
-M:	Manish Chopra <manish.chopra@cavium.com>
-M:	Dept-GELinuxNICDev@cavium.com
+M:	Manish Chopra <manishc@marvell.com>
+M:	GR-Linux-NIC-Dev@marvell.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qlge/
@ -15842,6 +15843,7 @@ F:	drivers/usb/common/usb-otg-fsm.c
 USB OVER IP DRIVER
 M:	Valentina Manea <valentina.manea.m@gmail.com>
 M:	Shuah Khan <shuah@kernel.org>
+M:	Shuah Khan <skhan@linuxfoundation.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	Documentation/usb/usbip_protocol.txt
--- a/10
+++ b/10
@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
 NAME = Shy Crocodile

 # *DOCUMENTATION*
@ -955,6 +955,7 @@ ifdef CONFIG_STACK_VALIDATION
  endif
 endif

+PHONY += prepare0

 ifeq ($(KBUILD_EXTMOD),)
 core-y		+= kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/
@ -1061,8 +1062,7 @@ scripts: scripts_basic scripts_dtc
 # archprepare is used in arch Makefiles and when processed asm symlink,
 # version.h and scripts_basic is processed / created.

-# Listed in dependency order
-PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
+PHONY += prepare archprepare prepare1 prepare2 prepare3

 # prepare3 is used to check if we are building in a separate output directory,
 # and if so do:
@ -1360,11 +1360,11 @@ mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
 mrproper-dirs      := $(addprefix _mrproper_,scripts)

-PHONY += $(mrproper-dirs) mrproper archmrproper
+PHONY += $(mrproper-dirs) mrproper
 $(mrproper-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)

-mrproper: clean archmrproper $(mrproper-dirs)
+mrproper: clean $(mrproper-dirs)
 	$(call cmd,rmdirs)
 	$(call cmd,rmfiles)

--- a/arch/arc/include/asm/Kbuild
+++ b/arch/arc/include/asm/Kbuild
@ -3,23 +3,19 @@ generic-y += bugs.h
 generic-y += compat.h
 generic-y += device.h
 generic-y += div64.h
-generic-y += dma-mapping.h
 generic-y += emergency-restart.h
 generic-y += extable.h
-generic-y += fb.h
 generic-y += ftrace.h
 generic-y += hardirq.h
 generic-y += hw_irq.h
 generic-y += irq_regs.h
 generic-y += irq_work.h
-generic-y += kmap_types.h
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
 generic-y += mm-arch-hooks.h
 generic-y += msi.h
 generic-y += parport.h
-generic-y += pci.h
 generic-y += percpu.h
 generic-y += preempt.h
 generic-y += topology.h
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@ -216,6 +216,14 @@ struct bcr_fp_arcv2 {
 #endif
 };

+struct bcr_actionpoint {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:21, min:1, num:2, ver:8;
+#else
+	unsigned int ver:8, num:2, min:1, pad:21;
+#endif
+};
+
 #include <soc/arc/timers.h>

 struct bcr_bpu_arcompact {
@ -283,7 +291,7 @@ struct cpuinfo_arc_cache {
 };

 struct cpuinfo_arc_bpu {
-	unsigned int ver, full, num_cache, num_pred;
+	unsigned int ver, full, num_cache, num_pred, ret_stk;
 };

 struct cpuinfo_arc_ccm {
@ -302,7 +310,7 @@ struct cpuinfo_arc {
 	struct {
 		unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, swape:1, pad1:2,
 			     fpu_sp:1, fpu_dp:1, dual:1, dual_enb:1, pad2:4,
-			     debug:1, ap:1, smart:1, rtt:1, pad3:4,
+			     ap_num:4, ap_full:1, smart:1, rtt:1, pad3:1,
 			     timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
 	} extn;
 	struct bcr_mpy extn_mpy;
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@ -340,7 +340,7 @@ static inline __attribute__ ((const)) int __fls(unsigned long x)
 /*
 * __ffs: Similar to ffs, but zero based (0-31)
 */
-static inline __attribute__ ((const)) int __ffs(unsigned long word)
+static inline __attribute__ ((const)) unsigned long __ffs(unsigned long word)
 {
 	if (!word)
 		return word;
@ -400,9 +400,9 @@ static inline __attribute__ ((const)) int ffs(unsigned long x)
 /*
 * __ffs: Similar to ffs, but zero based (0-31)
 */
-static inline __attribute__ ((const)) int __ffs(unsigned long x)
+static inline __attribute__ ((const)) unsigned long __ffs(unsigned long x)
 {
-	int n;
+	unsigned long n;

 	asm volatile(
 	"	ffs.f	%0, %1		\n"  /* 0:31; 31(Z) if src 0 */
--- a/arch/arc/include/asm/perf_event.h
+++ b/arch/arc/include/asm/perf_event.h
@ -103,7 +103,8 @@ static const char * const arc_pmu_ev_hw_map[] = {

 	/* counts condition */
 	[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmp", /* Excludes ZOL jumps */
+	/* All jump instructions that are taken */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmptak",
 	[PERF_COUNT_ARC_BPOK]         = "bpok",	  /* NP-NT, PT-T, PNT-NT */
 #ifdef CONFIG_ISA_ARCV2
 	[PERF_COUNT_HW_BRANCH_MISSES] = "bpmp",
--- a/arch/arc/kernel/perf_event.c
+++ b/arch/arc/kernel/perf_event.c
@ -1,15 +1,10 @@
-/*
- * Linux performance counter support for ARC700 series
- *
- * Copyright (C) 2013-2015 Synopsys, Inc. (www.synopsys.com)
- *
- * This code is inspired by the perf support of various other architectures.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Linux performance counter support for ARC CPUs.
+// This code is inspired by the perf support of various other architectures.
+//
+// Copyright (C) 2013-2018 Synopsys, Inc. (www.synopsys.com)
+
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
@ -19,12 +14,31 @@
 #include <asm/arcregs.h>
 #include <asm/stacktrace.h>

+/* HW holds 8 symbols + one for null terminator */
+#define ARCPMU_EVENT_NAME_LEN	9
+
+enum arc_pmu_attr_groups {
+	ARCPMU_ATTR_GR_EVENTS,
+	ARCPMU_ATTR_GR_FORMATS,
+	ARCPMU_NR_ATTR_GR
+};
+
+struct arc_pmu_raw_event_entry {
+	char name[ARCPMU_EVENT_NAME_LEN];
+};
+
 struct arc_pmu {
 	struct pmu	pmu;
 	unsigned int	irq;
 	int		n_counters;
+	int		n_events;
 	u64		max_period;
 	int		ev_hw_idx[PERF_COUNT_ARC_HW_MAX];
+
+	struct arc_pmu_raw_event_entry	*raw_entry;
+	struct attribute		**attrs;
+	struct perf_pmu_events_attr	*attr;
+	const struct attribute_group	*attr_groups[ARCPMU_NR_ATTR_GR + 1];
 };

 struct arc_pmu_cpu {
@ -49,6 +63,7 @@ static int callchain_trace(unsigned int addr, void *data)
 {
 	struct arc_callchain_trace *ctrl = data;
 	struct perf_callchain_entry_ctx *entry = ctrl->perf_stuff;
+
 	perf_callchain_store(entry, addr);

 	if (ctrl->depth++ < 3)
@ -57,8 +72,8 @@ static int callchain_trace(unsigned int addr, void *data)
 	return -1;
 }

-void
-perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
+void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry,
+			   struct pt_regs *regs)
 {
 	struct arc_callchain_trace ctrl = {
 		.depth = 0,
@ -68,8 +83,8 @@ perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *re
 	arc_unwind_core(NULL, regs, callchain_trace, &ctrl);
 }

-void
-perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
+void perf_callchain_user(struct perf_callchain_entry_ctx *entry,
+			 struct pt_regs *regs)
 {
 	/*
 	 * User stack can't be unwound trivially with kernel dwarf unwinder
@ -82,10 +97,10 @@ static struct arc_pmu *arc_pmu;
 static DEFINE_PER_CPU(struct arc_pmu_cpu, arc_pmu_cpu);

 /* read counter #idx; note that counter# != event# on ARC! */
-static uint64_t arc_pmu_read_counter(int idx)
+static u64 arc_pmu_read_counter(int idx)
 {
-	uint32_t tmp;
-	uint64_t result;
+	u32 tmp;
+	u64 result;

 	/*
 	 * ARC supports making 'snapshots' of the counters, so we don't
@ -94,7 +109,7 @@ static uint64_t arc_pmu_read_counter(int idx)
 	write_aux_reg(ARC_REG_PCT_INDEX, idx);
 	tmp = read_aux_reg(ARC_REG_PCT_CONTROL);
 	write_aux_reg(ARC_REG_PCT_CONTROL, tmp | ARC_REG_PCT_CONTROL_SN);
-	result = (uint64_t) (read_aux_reg(ARC_REG_PCT_SNAPH)) << 32;
+	result = (u64) (read_aux_reg(ARC_REG_PCT_SNAPH)) << 32;
 	result |= read_aux_reg(ARC_REG_PCT_SNAPL);

 	return result;
@ -103,9 +118,9 @@ static uint64_t arc_pmu_read_counter(int idx)
 static void arc_perf_event_update(struct perf_event *event,
 				  struct hw_perf_event *hwc, int idx)
 {
-	uint64_t prev_raw_count = local64_read(&hwc->prev_count);
-	uint64_t new_raw_count = arc_pmu_read_counter(idx);
-	int64_t delta = new_raw_count - prev_raw_count;
+	u64 prev_raw_count = local64_read(&hwc->prev_count);
+	u64 new_raw_count = arc_pmu_read_counter(idx);
+	s64 delta = new_raw_count - prev_raw_count;

 	/*
 	 * We aren't afraid of hwc->prev_count changing beneath our feet
@ -155,7 +170,7 @@ static int arc_pmu_event_init(struct perf_event *event)
 	int ret;

 	if (!is_sampling_event(event)) {
-		hwc->sample_period  = arc_pmu->max_period;
+		hwc->sample_period = arc_pmu->max_period;
 		hwc->last_period = hwc->sample_period;
 		local64_set(&hwc->period_left, hwc->sample_period);
 	}
@ -192,6 +207,18 @@ static int arc_pmu_event_init(struct perf_event *event)
 		pr_debug("init cache event with h/w %08x \'%s\'\n",
 			 (int)hwc->config, arc_pmu_ev_hw_map[ret]);
 		return 0;
+
+	case PERF_TYPE_RAW:
+		if (event->attr.config >= arc_pmu->n_events)
+			return -ENOENT;
+
+		hwc->config |= event->attr.config;
+		pr_debug("init raw event with idx %lld \'%s\'\n",
+			 event->attr.config,
+			 arc_pmu->raw_entry[event->attr.config].name);
+
+		return 0;
+
 	default:
 		return -ENOENT;
 	}
@ -200,7 +227,7 @@ static int arc_pmu_event_init(struct perf_event *event)
 /* starts all counters */
 static void arc_pmu_enable(struct pmu *pmu)
 {
-	uint32_t tmp;
+	u32 tmp;
 	tmp = read_aux_reg(ARC_REG_PCT_CONTROL);
 	write_aux_reg(ARC_REG_PCT_CONTROL, (tmp & 0xffff0000) | 0x1);
 }
@ -208,7 +235,7 @@ static void arc_pmu_enable(struct pmu *pmu)
 /* stops all counters */
 static void arc_pmu_disable(struct pmu *pmu)
 {
-	uint32_t tmp;
+	u32 tmp;
 	tmp = read_aux_reg(ARC_REG_PCT_CONTROL);
 	write_aux_reg(ARC_REG_PCT_CONTROL, (tmp & 0xffff0000) | 0x0);
 }
@ -228,7 +255,7 @@ static int arc_pmu_event_set_period(struct perf_event *event)
 		local64_set(&hwc->period_left, left);
 		hwc->last_period = period;
 		overflow = 1;
-	} else	if (unlikely(left <= 0)) {
+	} else if (unlikely(left <= 0)) {
 		/* left underflowed by less than period. */
 		left += period;
 		local64_set(&hwc->period_left, left);
@ -246,8 +273,8 @@ static int arc_pmu_event_set_period(struct perf_event *event)
 	write_aux_reg(ARC_REG_PCT_INDEX, idx);

 	/* Write value */
-	write_aux_reg(ARC_REG_PCT_COUNTL, (u32)value);
-	write_aux_reg(ARC_REG_PCT_COUNTH, (value >> 32));
+	write_aux_reg(ARC_REG_PCT_COUNTL, lower_32_bits(value));
+	write_aux_reg(ARC_REG_PCT_COUNTH, upper_32_bits(value));

 	perf_event_update_userpage(event);

@ -277,7 +304,7 @@ static void arc_pmu_start(struct perf_event *event, int flags)
 	/* Enable interrupt for this counter */
 	if (is_sampling_event(event))
 		write_aux_reg(ARC_REG_PCT_INT_CTRL,
-			      read_aux_reg(ARC_REG_PCT_INT_CTRL) | (1 << idx));
+			      read_aux_reg(ARC_REG_PCT_INT_CTRL) | BIT(idx));

 	/* enable ARC pmu here */
 	write_aux_reg(ARC_REG_PCT_INDEX, idx);		/* counter # */
@ -295,9 +322,9 @@ static void arc_pmu_stop(struct perf_event *event, int flags)
 		 * Reset interrupt flag by writing of 1. This is required
 		 * to make sure pending interrupt was not left.
 		 */
-		write_aux_reg(ARC_REG_PCT_INT_ACT, 1 << idx);
+		write_aux_reg(ARC_REG_PCT_INT_ACT, BIT(idx));
 		write_aux_reg(ARC_REG_PCT_INT_CTRL,
-			      read_aux_reg(ARC_REG_PCT_INT_CTRL) & ~(1 << idx));
+			      read_aux_reg(ARC_REG_PCT_INT_CTRL) & ~BIT(idx));
 	}

 	if (!(event->hw.state & PERF_HES_STOPPED)) {
@ -349,9 +376,10 @@ static int arc_pmu_add(struct perf_event *event, int flags)

 	if (is_sampling_event(event)) {
 		/* Mimic full counter overflow as other arches do */
-		write_aux_reg(ARC_REG_PCT_INT_CNTL, (u32)arc_pmu->max_period);
+		write_aux_reg(ARC_REG_PCT_INT_CNTL,
+			      lower_32_bits(arc_pmu->max_period));
 		write_aux_reg(ARC_REG_PCT_INT_CNTH,
-			      (arc_pmu->max_period >> 32));
+			      upper_32_bits(arc_pmu->max_period));
 	}

 	write_aux_reg(ARC_REG_PCT_CONFIG, 0);
@ -392,7 +420,7 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev)
 		idx = __ffs(active_ints);

 		/* Reset interrupt flag by writing of 1 */
-		write_aux_reg(ARC_REG_PCT_INT_ACT, 1 << idx);
+		write_aux_reg(ARC_REG_PCT_INT_ACT, BIT(idx));

 		/*
 		 * On reset of "interrupt active" bit corresponding
@ -400,7 +428,7 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev)
 		 * Now we need to re-enable interrupt for the counter.
 		 */
 		write_aux_reg(ARC_REG_PCT_INT_CTRL,
-			read_aux_reg(ARC_REG_PCT_INT_CTRL) | (1 << idx));
+			read_aux_reg(ARC_REG_PCT_INT_CTRL) | BIT(idx));

 		event = pmu_cpu->act_counter[idx];
 		hwc = &event->hw;
@ -414,7 +442,7 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev)
 				arc_pmu_stop(event, 0);
 		}

-		active_ints &= ~(1U << idx);
+		active_ints &= ~BIT(idx);
 	} while (active_ints);

 done:
@ -441,19 +469,108 @@ static void arc_cpu_pmu_irq_init(void *data)
 	write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff);
 }

+/* Event field occupies the bottom 15 bits of our config field */
+PMU_FORMAT_ATTR(event, "config:0-14");
+static struct attribute *arc_pmu_format_attrs[] = {
+	&format_attr_event.attr,
+	NULL,
+};
+
+static struct attribute_group arc_pmu_format_attr_gr = {
+	.name = "format",
+	.attrs = arc_pmu_format_attrs,
+};
+
+static ssize_t arc_pmu_events_sysfs_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *page)
+{
+	struct perf_pmu_events_attr *pmu_attr;
+
+	pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
+	return sprintf(page, "event=0x%04llx\n", pmu_attr->id);
+}
+
+/*
+ * We don't add attrs here as we don't have pre-defined list of perf events.
+ * We will generate and add attrs dynamically in probe() after we read HW
+ * configuration.
+ */
+static struct attribute_group arc_pmu_events_attr_gr = {
+	.name = "events",
+};
+
+static void arc_pmu_add_raw_event_attr(int j, char *str)
+{
+	memmove(arc_pmu->raw_entry[j].name, str, ARCPMU_EVENT_NAME_LEN - 1);
+	arc_pmu->attr[j].attr.attr.name = arc_pmu->raw_entry[j].name;
+	arc_pmu->attr[j].attr.attr.mode = VERIFY_OCTAL_PERMISSIONS(0444);
+	arc_pmu->attr[j].attr.show = arc_pmu_events_sysfs_show;
+	arc_pmu->attr[j].id = j;
+	arc_pmu->attrs[j] = &(arc_pmu->attr[j].attr.attr);
+}
+
+static int arc_pmu_raw_alloc(struct device *dev)
+{
+	arc_pmu->attr = devm_kmalloc_array(dev, arc_pmu->n_events + 1,
+		sizeof(*arc_pmu->attr), GFP_KERNEL | __GFP_ZERO);
+	if (!arc_pmu->attr)
+		return -ENOMEM;
+
+	arc_pmu->attrs = devm_kmalloc_array(dev, arc_pmu->n_events + 1,
+		sizeof(*arc_pmu->attrs), GFP_KERNEL | __GFP_ZERO);
+	if (!arc_pmu->attrs)
+		return -ENOMEM;
+
+	arc_pmu->raw_entry = devm_kmalloc_array(dev, arc_pmu->n_events,
+		sizeof(*arc_pmu->raw_entry), GFP_KERNEL | __GFP_ZERO);
+	if (!arc_pmu->raw_entry)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static inline bool event_in_hw_event_map(int i, char *name)
+{
+	if (!arc_pmu_ev_hw_map[i])
+		return false;
+
+	if (!strlen(arc_pmu_ev_hw_map[i]))
+		return false;
+
+	if (strcmp(arc_pmu_ev_hw_map[i], name))
+		return false;
+
+	return true;
+}
+
+static void arc_pmu_map_hw_event(int j, char *str)
+{
+	int i;
+
+	/* See if HW condition has been mapped to a perf event_id */
+	for (i = 0; i < ARRAY_SIZE(arc_pmu_ev_hw_map); i++) {
+		if (event_in_hw_event_map(i, str)) {
+			pr_debug("mapping perf event %2d to h/w event \'%8s\' (idx %d)\n",
+				 i, str, j);
+			arc_pmu->ev_hw_idx[i] = j;
+		}
+	}
+}
+
 static int arc_pmu_device_probe(struct platform_device *pdev)
 {
 	struct arc_reg_pct_build pct_bcr;
 	struct arc_reg_cc_build cc_bcr;
-	int i, j, has_interrupts;
+	int i, has_interrupts;
 	int counter_size;	/* in bits */

 	union cc_name {
 		struct {
-			uint32_t word0, word1;
+			u32 word0, word1;
 			char sentinel;
 		} indiv;
-		char str[9];
+		char str[ARCPMU_EVENT_NAME_LEN];
 	} cc_name;


@ -463,15 +580,22 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 	BUILD_BUG_ON(ARC_PERF_MAX_COUNTERS > 32);
-	BUG_ON(pct_bcr.c > ARC_PERF_MAX_COUNTERS);
+	if (WARN_ON(pct_bcr.c > ARC_PERF_MAX_COUNTERS))
+		return -EINVAL;

 	READ_BCR(ARC_REG_CC_BUILD, cc_bcr);
-	BUG_ON(!cc_bcr.v); /* Counters exist but No countable conditions ? */
+	if (WARN(!cc_bcr.v, "Counters exist but No countable conditions?"))
+		return -EINVAL;

 	arc_pmu = devm_kzalloc(&pdev->dev, sizeof(struct arc_pmu), GFP_KERNEL);
 	if (!arc_pmu)
 		return -ENOMEM;

+	arc_pmu->n_events = cc_bcr.c;
+
+	if (arc_pmu_raw_alloc(&pdev->dev))
+		return -ENOMEM;
+
 	has_interrupts = is_isa_arcv2() ? pct_bcr.i : 0;

 	arc_pmu->n_counters = pct_bcr.c;
@ -481,30 +605,26 @@ static int arc_pmu_device_probe(struct platform_device *pdev)

 	pr_info("ARC perf\t: %d counters (%d bits), %d conditions%s\n",
 		arc_pmu->n_counters, counter_size, cc_bcr.c,
-		has_interrupts ? ", [overflow IRQ support]":"");
+		has_interrupts ? ", [overflow IRQ support]" : "");

-	cc_name.str[8] = 0;
+	cc_name.str[ARCPMU_EVENT_NAME_LEN - 1] = 0;
 	for (i = 0; i < PERF_COUNT_ARC_HW_MAX; i++)
 		arc_pmu->ev_hw_idx[i] = -1;

 	/* loop thru all available h/w condition indexes */
-	for (j = 0; j < cc_bcr.c; j++) {
-		write_aux_reg(ARC_REG_CC_INDEX, j);
+	for (i = 0; i < cc_bcr.c; i++) {
+		write_aux_reg(ARC_REG_CC_INDEX, i);
 		cc_name.indiv.word0 = read_aux_reg(ARC_REG_CC_NAME0);
 		cc_name.indiv.word1 = read_aux_reg(ARC_REG_CC_NAME1);

-		/* See if it has been mapped to a perf event_id */
-		for (i = 0; i < ARRAY_SIZE(arc_pmu_ev_hw_map); i++) {
-			if (arc_pmu_ev_hw_map[i] &&
-			    !strcmp(arc_pmu_ev_hw_map[i], cc_name.str) &&
-			    strlen(arc_pmu_ev_hw_map[i])) {
-				pr_debug("mapping perf event %2d to h/w event \'%8s\' (idx %d)\n",
-					 i, cc_name.str, j);
-				arc_pmu->ev_hw_idx[i] = j;
-			}
-		}
+		arc_pmu_map_hw_event(i, cc_name.str);
+		arc_pmu_add_raw_event_attr(i, cc_name.str);
 	}

+	arc_pmu_events_attr_gr.attrs = arc_pmu->attrs;
+	arc_pmu->attr_groups[ARCPMU_ATTR_GR_EVENTS] = &arc_pmu_events_attr_gr;
+	arc_pmu->attr_groups[ARCPMU_ATTR_GR_FORMATS] = &arc_pmu_format_attr_gr;
+
 	arc_pmu->pmu = (struct pmu) {
 		.pmu_enable	= arc_pmu_enable,
 		.pmu_disable	= arc_pmu_disable,
@ -514,6 +634,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 		.start		= arc_pmu_start,
 		.stop		= arc_pmu_stop,
 		.read		= arc_pmu_read,
+		.attr_groups	= arc_pmu->attr_groups,
 	};

 	if (has_interrupts) {
@ -535,17 +656,19 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 	} else
 		arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;

-	return perf_pmu_register(&arc_pmu->pmu, pdev->name, PERF_TYPE_RAW);
+	/*
+	 * perf parser doesn't really like '-' symbol in events name, so let's
+	 * use '_' in arc pct name as it goes to kernel PMU event prefix.
+	 */
+	return perf_pmu_register(&arc_pmu->pmu, "arc_pct", PERF_TYPE_RAW);
 }

-#ifdef CONFIG_OF
 static const struct of_device_id arc_pmu_match[] = {
 	{ .compatible = "snps,arc700-pct" },
 	{ .compatible = "snps,archs-pct" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, arc_pmu_match);
-#endif

 static struct platform_driver arc_pmu_driver = {
 	.driver	= {
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@ -123,6 +123,7 @@ static void read_arc_build_cfg_regs(void)
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
 	const struct id_to_str *tbl;
 	struct bcr_isa_arcv2 isa;
+	struct bcr_actionpoint ap;

 	FIX_PTR(cpu);

@ -195,6 +196,7 @@ static void read_arc_build_cfg_regs(void)
 		cpu->bpu.full = bpu.ft;
 		cpu->bpu.num_cache = 256 << bpu.bce;
 		cpu->bpu.num_pred = 2048 << bpu.pte;
+		cpu->bpu.ret_stk = 4 << bpu.rse;

 		if (cpu->core.family >= 0x54) {
 			unsigned int exec_ctrl;
@ -207,8 +209,11 @@ static void read_arc_build_cfg_regs(void)
 		}
 	}

-	READ_BCR(ARC_REG_AP_BCR, bcr);
-	cpu->extn.ap = bcr.ver ? 1 : 0;
+	READ_BCR(ARC_REG_AP_BCR, ap);
+	if (ap.ver) {
+		cpu->extn.ap_num = 2 << ap.num;
+		cpu->extn.ap_full = !!ap.min;
+	}

 	READ_BCR(ARC_REG_SMART_BCR, bcr);
 	cpu->extn.smart = bcr.ver ? 1 : 0;
@ -216,8 +221,6 @@ static void read_arc_build_cfg_regs(void)
 	READ_BCR(ARC_REG_RTT_BCR, bcr);
 	cpu->extn.rtt = bcr.ver ? 1 : 0;

-	cpu->extn.debug = cpu->extn.ap | cpu->extn.smart | cpu->extn.rtt;
-
 	READ_BCR(ARC_REG_ISA_CFG_BCR, isa);

 	/* some hacks for lack of feature BCR info in old ARC700 cores */
@ -299,10 +302,10 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)

 	if (cpu->bpu.ver)
 		n += scnprintf(buf + n, len - n,
-			      "BPU\t\t: %s%s match, cache:%d, Predict Table:%d",
+			      "BPU\t\t: %s%s match, cache:%d, Predict Table:%d Return stk: %d",
 			      IS_AVAIL1(cpu->bpu.full, "full"),
 			      IS_AVAIL1(!cpu->bpu.full, "partial"),
-			      cpu->bpu.num_cache, cpu->bpu.num_pred);
+			      cpu->bpu.num_cache, cpu->bpu.num_pred, cpu->bpu.ret_stk);

 	if (is_isa_arcv2()) {
 		struct bcr_lpb lpb;
@ -336,11 +339,17 @@ static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
 			       IS_AVAIL1(cpu->extn.fpu_sp, "SP "),
 			       IS_AVAIL1(cpu->extn.fpu_dp, "DP "));

-	if (cpu->extn.debug)
-		n += scnprintf(buf + n, len - n, "DEBUG\t\t: %s%s%s\n",
-			       IS_AVAIL1(cpu->extn.ap, "ActionPoint "),
+	if (cpu->extn.ap_num | cpu->extn.smart | cpu->extn.rtt) {
+		n += scnprintf(buf + n, len - n, "DEBUG\t\t: %s%s",
 			       IS_AVAIL1(cpu->extn.smart, "smaRT "),
 			       IS_AVAIL1(cpu->extn.rtt, "RTT "));
+		if (cpu->extn.ap_num) {
+			n += scnprintf(buf + n, len - n, "ActionPoint %d/%s",
+				       cpu->extn.ap_num,
+				       cpu->extn.ap_full ? "full":"min");
+		}
+		n += scnprintf(buf + n, len - n, "\n");
+	}

 	if (cpu->dccm.sz || cpu->iccm.sz)
 		n += scnprintf(buf + n, len - n, "Extn [CCM]\t: DCCM @ %x, %d KB / ICCM: @ %x, %d KB\n",
--- a/arch/arc/kernel/troubleshoot.c
+++ b/arch/arc/kernel/troubleshoot.c
@ -18,6 +18,8 @@
 #include <asm/arcregs.h>
 #include <asm/irqflags.h>

+#define ARC_PATH_MAX	256
+
 /*
 * Common routine to print scratch regs (r0-r12) or callee regs (r13-r25)
 *   -Prints 3 regs per line and a CR.
@ -58,11 +60,12 @@ static void show_callee_regs(struct callee_regs *cregs)
 	print_reg_file(&(cregs->r13), 13);
 }

-static void print_task_path_n_nm(struct task_struct *tsk, char *buf)
+static void print_task_path_n_nm(struct task_struct *tsk)
 {
 	char *path_nm = NULL;
 	struct mm_struct *mm;
 	struct file *exe_file;
+	char buf[ARC_PATH_MAX];

 	mm = get_task_mm(tsk);
 	if (!mm)
@ -72,7 +75,7 @@ static void print_task_path_n_nm(struct task_struct *tsk, char *buf)
 	mmput(mm);

 	if (exe_file) {
-		path_nm = file_path(exe_file, buf, 255);
+		path_nm = file_path(exe_file, buf, ARC_PATH_MAX-1);
 		fput(exe_file);
 	}

@ -80,10 +83,9 @@ static void print_task_path_n_nm(struct task_struct *tsk, char *buf)
 	pr_info("Path: %s\n", !IS_ERR(path_nm) ? path_nm : "?");
 }

-static void show_faulting_vma(unsigned long address, char *buf)
+static void show_faulting_vma(unsigned long address)
 {
 	struct vm_area_struct *vma;
-	char *nm = buf;
 	struct mm_struct *active_mm = current->active_mm;

 	/* can't use print_vma_addr() yet as it doesn't check for
@ -96,8 +98,11 @@ static void show_faulting_vma(unsigned long address, char *buf)
 	 * if the container VMA is not found
 	 */
 	if (vma && (vma->vm_start <= address)) {
+		char buf[ARC_PATH_MAX];
+		char *nm = "?";
+
 		if (vma->vm_file) {
-			nm = file_path(vma->vm_file, buf, PAGE_SIZE - 1);
+			nm = file_path(vma->vm_file, buf, ARC_PATH_MAX-1);
 			if (IS_ERR(nm))
 				nm = "?";
 		}
@ -173,13 +178,14 @@ void show_regs(struct pt_regs *regs)
 {
 	struct task_struct *tsk = current;
 	struct callee_regs *cregs;
-	char *buf;

-	buf = (char *)__get_free_page(GFP_KERNEL);
-	if (!buf)
-		return;
+	/*
+	 * generic code calls us with preemption disabled, but some calls
+	 * here could sleep, so re-enable to avoid lockdep splat
+	 */
+	preempt_enable();

-	print_task_path_n_nm(tsk, buf);
+	print_task_path_n_nm(tsk);
 	show_regs_print_info(KERN_INFO);

 	show_ecr_verbose(regs);
@ -189,7 +195,7 @@ void show_regs(struct pt_regs *regs)
 		(void *)regs->blink, (void *)regs->ret);

 	if (user_mode(regs))
-		show_faulting_vma(regs->ret, buf); /* faulting code, not data */
+		show_faulting_vma(regs->ret); /* faulting code, not data */

 	pr_info("[STAT32]: 0x%08lx", regs->status32);

@ -222,7 +228,7 @@ void show_regs(struct pt_regs *regs)
 	if (cregs)
 		show_callee_regs(cregs);

-	free_page((unsigned long)buf);
+	preempt_disable();
 }

 void show_kernel_fault_diag(const char *str, struct pt_regs *regs,
--- a/arch/arc/lib/memset-archs.S
+++ b/arch/arc/lib/memset-archs.S
@ -7,11 +7,39 @@
 */

 #include <linux/linkage.h>
+#include <asm/cache.h>

-#undef PREALLOC_NOT_AVAIL
+/*
+ * The memset implementation below is optimized to use prefetchw and prealloc
+ * instruction in case of CPU with 64B L1 data cache line (L1_CACHE_SHIFT == 6)
+ * If you want to implement optimized memset for other possible L1 data cache
+ * line lengths (32B and 128B) you should rewrite code carefully checking
+ * we don't call any prefetchw/prealloc instruction for L1 cache lines which
+ * don't belongs to memset area.
+ */
+
+#if L1_CACHE_SHIFT == 6
+
+.macro PREALLOC_INSTR	reg, off
+	prealloc	[\reg, \off]
+.endm
+
+.macro PREFETCHW_INSTR	reg, off
+	prefetchw	[\reg, \off]
+.endm
+
+#else
+
+.macro PREALLOC_INSTR
+.endm
+
+.macro PREFETCHW_INSTR
+.endm
+
+#endif

 ENTRY_CFI(memset)
-	prefetchw [r0]		; Prefetch the write location
+	PREFETCHW_INSTR	r0, 0	; Prefetch the first write location
 	mov.f	0, r2
 ;;; if size is zero
 	jz.d	[blink]
@ -48,11 +76,8 @@ ENTRY_CFI(memset)

 	lpnz	@.Lset64bytes
 	;; LOOP START
-#ifdef PREALLOC_NOT_AVAIL
-	prefetchw [r3, 64]	;Prefetch the next write location
-#else
-	prealloc  [r3, 64]
-#endif
+	PREALLOC_INSTR	r3, 64	; alloc next line w/o fetching
+
 #ifdef CONFIG_ARC_HAS_LL64
 	std.ab	r4, [r3, 8]
 	std.ab	r4, [r3, 8]
@ -85,7 +110,6 @@ ENTRY_CFI(memset)
 	lsr.f	lp_count, r2, 5 ;Last remaining  max 124 bytes
 	lpnz	.Lset32bytes
 	;; LOOP START
-	prefetchw   [r3, 32]	;Prefetch the next write location
 #ifdef CONFIG_ARC_HAS_LL64
 	std.ab	r4, [r3, 8]
 	std.ab	r4, [r3, 8]
--- a/arch/arc/mm/fault.c
+++ b/arch/arc/mm/fault.c
@ -141,12 +141,17 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 	 */
 	fault = handle_mm_fault(vma, address, flags);

-	/* If Pagefault was interrupted by SIGKILL, exit page fault "early" */
 	if (fatal_signal_pending(current)) {
-		if ((fault & VM_FAULT_ERROR) && !(fault & VM_FAULT_RETRY))
-			up_read(&mm->mmap_sem);
-		if (user_mode(regs))
+
+		/*
+		 * if fault retry, mmap_sem already relinquished by core mm
+		 * so OK to return to user mode (with signal handled first)
+		 */
+		if (fault & VM_FAULT_RETRY) {
+			if (!user_mode(regs))
+				goto no_context;
 			return;
+		}
 	}

 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@ -119,7 +119,8 @@ void __init setup_arch_memory(void)
 	 */

 	memblock_add_node(low_mem_start, low_mem_sz, 0);
-	memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
+	memblock_reserve(CONFIG_LINUX_LINK_BASE,
+			 __pa(_end) - CONFIG_LINUX_LINK_BASE);

 #ifdef CONFIG_BLK_DEV_INITRD
 	if (phys_initrd_size) {
--- a/arch/arm/include/asm/xen/page-coherent.h
+++ b/arch/arm/include/asm/xen/page-coherent.h
@ -1 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_ARM_XEN_PAGE_COHERENT_H
+#define _ASM_ARM_XEN_PAGE_COHERENT_H
+
+#include <linux/dma-mapping.h>
+#include <asm/page.h>
 #include <xen/arm/page-coherent.h>
+
+static inline const struct dma_map_ops *xen_get_dma_ops(struct device *dev)
+{
+	if (dev && dev->archdata.dev_dma_ops)
+		return dev->archdata.dev_dma_ops;
+	return get_arch_dma_ops(NULL);
+}
+
+static inline void *xen_alloc_coherent_pages(struct device *hwdev, size_t size,
+		dma_addr_t *dma_handle, gfp_t flags, unsigned long attrs)
+{
+	return xen_get_dma_ops(hwdev)->alloc(hwdev, size, dma_handle, flags, attrs);
+}
+
+static inline void xen_free_coherent_pages(struct device *hwdev, size_t size,
+		void *cpu_addr, dma_addr_t dma_handle, unsigned long attrs)
+{
+	xen_get_dma_ops(hwdev)->free(hwdev, size, cpu_addr, dma_handle, attrs);
+}
+
+static inline void xen_dma_map_page(struct device *hwdev, struct page *page,
+	     dma_addr_t dev_addr, unsigned long offset, size_t size,
+	     enum dma_data_direction dir, unsigned long attrs)
+{
+	unsigned long page_pfn = page_to_xen_pfn(page);
+	unsigned long dev_pfn = XEN_PFN_DOWN(dev_addr);
+	unsigned long compound_pages =
+		(1<<compound_order(page)) * XEN_PFN_PER_PAGE;
+	bool local = (page_pfn <= dev_pfn) &&
+		(dev_pfn - page_pfn < compound_pages);
+
+	/*
+	 * Dom0 is mapped 1:1, while the Linux page can span across
+	 * multiple Xen pages, it's not possible for it to contain a
+	 * mix of local and foreign Xen pages. So if the first xen_pfn
+	 * == mfn the page is local otherwise it's a foreign page
+	 * grant-mapped in dom0. If the page is local we can safely
+	 * call the native dma_ops function, otherwise we call the xen
+	 * specific function.
+	 */
+	if (local)
+		xen_get_dma_ops(hwdev)->map_page(hwdev, page, offset, size, dir, attrs);
+	else
+		__xen_dma_map_page(hwdev, page, dev_addr, offset, size, dir, attrs);
+}
+
+static inline void xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle,
+		size_t size, enum dma_data_direction dir, unsigned long attrs)
+{
+	unsigned long pfn = PFN_DOWN(handle);
+	/*
+	 * Dom0 is mapped 1:1, while the Linux page can be spanned accross
+	 * multiple Xen page, it's not possible to have a mix of local and
+	 * foreign Xen page. Dom0 is mapped 1:1, so calling pfn_valid on a
+	 * foreign mfn will always return false. If the page is local we can
+	 * safely call the native dma_ops function, otherwise we call the xen
+	 * specific function.
+	 */
+	if (pfn_valid(pfn)) {
+		if (xen_get_dma_ops(hwdev)->unmap_page)
+			xen_get_dma_ops(hwdev)->unmap_page(hwdev, handle, size, dir, attrs);
+	} else
+		__xen_dma_unmap_page(hwdev, handle, size, dir, attrs);
+}
+
+static inline void xen_dma_sync_single_for_cpu(struct device *hwdev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	unsigned long pfn = PFN_DOWN(handle);
+	if (pfn_valid(pfn)) {
+		if (xen_get_dma_ops(hwdev)->sync_single_for_cpu)
+			xen_get_dma_ops(hwdev)->sync_single_for_cpu(hwdev, handle, size, dir);
+	} else
+		__xen_dma_sync_single_for_cpu(hwdev, handle, size, dir);
+}
+
+static inline void xen_dma_sync_single_for_device(struct device *hwdev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	unsigned long pfn = PFN_DOWN(handle);
+	if (pfn_valid(pfn)) {
+		if (xen_get_dma_ops(hwdev)->sync_single_for_device)
+			xen_get_dma_ops(hwdev)->sync_single_for_device(hwdev, handle, size, dir);
+	} else
+		__xen_dma_sync_single_for_device(hwdev, handle, size, dir);
+}
+
+#endif /* _ASM_ARM_XEN_PAGE_COHERENT_H */
--- a/arch/arm64/include/asm/cache.h
+++ b/arch/arm64/include/asm/cache.h
@ -60,8 +60,6 @@

 #ifdef CONFIG_KASAN_SW_TAGS
 #define ARCH_SLAB_MINALIGN	(1ULL << KASAN_SHADOW_SCALE_SHIFT)
-#else
-#define ARCH_SLAB_MINALIGN	__alignof__(unsigned long long)
 #endif

 #ifndef __ASSEMBLY__
--- a/arch/arm64/include/asm/device.h
+++ b/arch/arm64/include/asm/device.h
@ -20,9 +20,6 @@ struct dev_archdata {
 #ifdef CONFIG_IOMMU_API
 	void *iommu;			/* private IOMMU data */
 #endif
-#ifdef CONFIG_XEN
-	const struct dma_map_ops *dev_dma_ops;
-#endif
 };

 struct pdev_archdata {
--- a/arch/arm64/include/asm/mmu.h
+++ b/arch/arm64/include/asm/mmu.h
@ -60,8 +60,11 @@ static inline bool arm64_kernel_use_ng_mappings(void)
 	 * later determine that kpti is required, then
 	 * kpti_install_ng_mappings() will make them non-global.
 	 */
+	if (arm64_kernel_unmapped_at_el0())
+		return true;
+
 	if (!IS_ENABLED(CONFIG_RANDOMIZE_BASE))
-		return arm64_kernel_unmapped_at_el0();
+		return false;

 	/*
 	 * KASLR is enabled so we're going to be enabling kpti on non-broken
--- a/arch/arm64/include/asm/xen/page-coherent.h
+++ b/arch/arm64/include/asm/xen/page-coherent.h
@ -1 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_ARM64_XEN_PAGE_COHERENT_H
+#define _ASM_ARM64_XEN_PAGE_COHERENT_H
+
+#include <linux/dma-mapping.h>
+#include <asm/page.h>
 #include <xen/arm/page-coherent.h>
+
+static inline void *xen_alloc_coherent_pages(struct device *hwdev, size_t size,
+		dma_addr_t *dma_handle, gfp_t flags, unsigned long attrs)
+{
+	return dma_direct_alloc(hwdev, size, dma_handle, flags, attrs);
+}
+
+static inline void xen_free_coherent_pages(struct device *hwdev, size_t size,
+		void *cpu_addr, dma_addr_t dma_handle, unsigned long attrs)
+{
+	dma_direct_free(hwdev, size, cpu_addr, dma_handle, attrs);
+}
+
+static inline void xen_dma_sync_single_for_cpu(struct device *hwdev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	unsigned long pfn = PFN_DOWN(handle);
+
+	if (pfn_valid(pfn))
+		dma_direct_sync_single_for_cpu(hwdev, handle, size, dir);
+	else
+		__xen_dma_sync_single_for_cpu(hwdev, handle, size, dir);
+}
+
+static inline void xen_dma_sync_single_for_device(struct device *hwdev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	unsigned long pfn = PFN_DOWN(handle);
+	if (pfn_valid(pfn))
+		dma_direct_sync_single_for_device(hwdev, handle, size, dir);
+	else
+		__xen_dma_sync_single_for_device(hwdev, handle, size, dir);
+}
+
+static inline void xen_dma_map_page(struct device *hwdev, struct page *page,
+	     dma_addr_t dev_addr, unsigned long offset, size_t size,
+	     enum dma_data_direction dir, unsigned long attrs)
+{
+	unsigned long page_pfn = page_to_xen_pfn(page);
+	unsigned long dev_pfn = XEN_PFN_DOWN(dev_addr);
+	unsigned long compound_pages =
+		(1<<compound_order(page)) * XEN_PFN_PER_PAGE;
+	bool local = (page_pfn <= dev_pfn) &&
+		(dev_pfn - page_pfn < compound_pages);
+
+	if (local)
+		dma_direct_map_page(hwdev, page, offset, size, dir, attrs);
+	else
+		__xen_dma_map_page(hwdev, page, dev_addr, offset, size, dir, attrs);
+}
+
+static inline void xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle,
+		size_t size, enum dma_data_direction dir, unsigned long attrs)
+{
+	unsigned long pfn = PFN_DOWN(handle);
+	/*
+	 * Dom0 is mapped 1:1, while the Linux page can be spanned accross
+	 * multiple Xen page, it's not possible to have a mix of local and
+	 * foreign Xen page. Dom0 is mapped 1:1, so calling pfn_valid on a
+	 * foreign mfn will always return false. If the page is local we can
+	 * safely call the native dma_ops function, otherwise we call the xen
+	 * specific function.
+	 */
+	if (pfn_valid(pfn))
+		dma_direct_unmap_page(hwdev, handle, size, dir, attrs);
+	else
+		__xen_dma_unmap_page(hwdev, handle, size, dir, attrs);
+}
+
+#endif /* _ASM_ARM64_XEN_PAGE_COHERENT_H */
--- a/arch/arm64/kernel/kaslr.c
+++ b/arch/arm64/kernel/kaslr.c
@ -14,6 +14,7 @@
 #include <linux/sched.h>
 #include <linux/types.h>

+#include <asm/cacheflush.h>
 #include <asm/fixmap.h>
 #include <asm/kernel-pgtable.h>
 #include <asm/memory.h>
@ -43,7 +44,7 @@ static __init u64 get_kaslr_seed(void *fdt)
 	return ret;
 }

-static __init const u8 *get_cmdline(void *fdt)
+static __init const u8 *kaslr_get_cmdline(void *fdt)
 {
 	static __initconst const u8 default_cmdline[] = CONFIG_CMDLINE;

@ -109,7 +110,7 @@ u64 __init kaslr_early_init(u64 dt_phys)
 	 * Check if 'nokaslr' appears on the command line, and
 	 * return 0 if that is the case.
 	 */
-	cmdline = get_cmdline(fdt);
+	cmdline = kaslr_get_cmdline(fdt);
 	str = strstr(cmdline, "nokaslr");
 	if (str == cmdline || (str > cmdline && *(str - 1) == ' '))
 		return 0;
@ -169,5 +170,8 @@ u64 __init kaslr_early_init(u64 dt_phys)
 	module_alloc_base += (module_range * (seed & ((1 << 21) - 1))) >> 21;
 	module_alloc_base &= PAGE_MASK;

+	__flush_dcache_area(&module_alloc_base, sizeof(module_alloc_base));
+	__flush_dcache_area(&memstart_offset_seed, sizeof(memstart_offset_seed));
+
 	return offset;
 }
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@ -466,9 +466,7 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 	__iommu_setup_dma_ops(dev, dma_base, size, iommu);

 #ifdef CONFIG_XEN
-	if (xen_initial_domain()) {
-		dev->archdata.dev_dma_ops = dev->dma_ops;
+	if (xen_initial_domain())
 		dev->dma_ops = xen_dma_ops;
-	}
 #endif
 }
--- a/arch/h8300/Makefile
+++ b/arch/h8300/Makefile
@ -37,8 +37,6 @@ libs-y	+= arch/$(ARCH)/lib/

 boot := arch/h8300/boot

-archmrproper:
-
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)

--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@ -16,8 +16,6 @@ KBUILD_DEFCONFIG := generic_defconfig
 NM := $(CROSS_COMPILE)nm -B
 READELF := $(CROSS_COMPILE)readelf

-export AWK
-
 CHECKFLAGS	+= -D__ia64=1 -D__ia64__=1 -D_LP64 -D__LP64__

 OBJCOPYFLAGS	:= --strip-all
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@ -3155,6 +3155,7 @@ config MIPS32_O32
 config MIPS32_N32
 	bool "Kernel support for n32 binaries"
 	depends on 64BIT
+	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
 	select COMPAT
 	select MIPS32_COMPAT
 	select SYSVIPC_COMPAT if SYSVIPC
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@ -173,6 +173,31 @@ void __init plat_mem_setup(void)
 	pm_power_off = bcm47xx_machine_halt;
 }

+#ifdef CONFIG_BCM47XX_BCMA
+static struct device * __init bcm47xx_setup_device(void)
+{
+	struct device *dev;
+	int err;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return NULL;
+
+	err = dev_set_name(dev, "bcm47xx_soc");
+	if (err) {
+		pr_err("Failed to set SoC device name: %d\n", err);
+		kfree(dev);
+		return NULL;
+	}
+
+	err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
+	if (err)
+		pr_err("Failed to set SoC DMA mask: %d\n", err);
+
+	return dev;
+}
+#endif
+
 /*
 * This finishes bus initialization doing things that were not possible without
 * kmalloc. Make sure to call it late enough (after mm_init).
@ -183,6 +208,10 @@ void __init bcm47xx_bus_setup(void)
 	if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA) {
 		int err;

+		bcm47xx_bus.bcma.dev = bcm47xx_setup_device();
+		if (!bcm47xx_bus.bcma.dev)
+			panic("Failed to setup SoC device\n");
+
 		err = bcma_host_soc_init(&bcm47xx_bus.bcma);
 		if (err)
 			panic("Failed to initialize BCMA bus (err %d)", err);
@ -235,6 +264,8 @@ static int __init bcm47xx_register_bus_complete(void)
 #endif
 #ifdef CONFIG_BCM47XX_BCMA
 	case BCM47XX_BUS_TYPE_BCMA:
+		if (device_register(bcm47xx_bus.bcma.dev))
+			pr_err("Failed to register SoC device\n");
 		bcma_bus_register(&bcm47xx_bus.bcma.bus);
 		break;
 #endif
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@ -98,7 +98,7 @@ static void octeon_kexec_smp_down(void *ignored)
 	"	sync						\n"
 	"	synci	($0)					\n");

-	relocated_kexec_smp_wait(NULL);
+	kexec_reboot();
 }
 #endif

--- a/arch/mips/configs/ath79_defconfig
+++ b/arch/mips/configs/ath79_defconfig
@ -66,6 +66,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=1
 CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_AR933X=y
 CONFIG_SERIAL_AR933X_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
--- a/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h
+++ b/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h
@ -18,8 +18,6 @@
 #define INT_NUM_EXTRA_START		(INT_NUM_IM4_IRL0 + 32)
 #define INT_NUM_IM_OFFSET		(INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)

-#define MIPS_CPU_TIMER_IRQ			7
-
 #define MAX_IM			5

 #endif /* _FALCON_IRQ__ */
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
@ -19,8 +19,6 @@

 #define LTQ_DMA_CH0_INT		(INT_NUM_IM2_IRL0)

-#define MIPS_CPU_TIMER_IRQ	7
-
 #define MAX_IM			5

 #endif
--- a/arch/mips/jazz/jazzdma.c
+++ b/arch/mips/jazz/jazzdma.c
@ -74,14 +74,15 @@ static int __init vdma_init(void)
 						    get_order(VDMA_PGTBL_SIZE));
 	BUG_ON(!pgtbl);
 	dma_cache_wback_inv((unsigned long)pgtbl, VDMA_PGTBL_SIZE);
-	pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
+	pgtbl = (VDMA_PGTBL_ENTRY *)CKSEG1ADDR((unsigned long)pgtbl);

 	/*
 	 * Clear the R4030 translation table
 	 */
 	vdma_pgtbl_init();

-	r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl));
+	r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE,
+			  CPHYSADDR((unsigned long)pgtbl));
 	r4030_write_reg32(JAZZ_R4030_TRSTBL_LIM, VDMA_PGTBL_SIZE);
 	r4030_write_reg32(JAZZ_R4030_TRSTBL_INV, 0);

--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@ -224,9 +224,11 @@ static struct irq_chip ltq_eiu_type = {
 	.irq_set_type = ltq_eiu_settype,
 };

-static void ltq_hw_irqdispatch(int module)
+static void ltq_hw_irq_handler(struct irq_desc *desc)
 {
+	int module = irq_desc_get_irq(desc) - 2;
 	u32 irq;
+	int hwirq;

 	irq = ltq_icu_r32(module, LTQ_ICU_IM0_IOSR);
 	if (irq == 0)
@ -237,7 +239,8 @@ static void ltq_hw_irqdispatch(int module)
 	 * other bits might be bogus
 	 */
 	irq = __fls(irq);
-	do_IRQ((int)irq + MIPS_CPU_IRQ_CASCADE + (INT_NUM_IM_OFFSET * module));
+	hwirq = irq + MIPS_CPU_IRQ_CASCADE + (INT_NUM_IM_OFFSET * module);
+	generic_handle_irq(irq_linear_revmap(ltq_domain, hwirq));

 	/* if this is a EBU irq, we need to ack it or get a deadlock */
 	if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
@ -245,49 +248,6 @@ static void ltq_hw_irqdispatch(int module)
 			LTQ_EBU_PCC_ISTAT);
 }

-#define DEFINE_HWx_IRQDISPATCH(x)					\
-	static void ltq_hw ## x ## _irqdispatch(void)			\
-	{								\
-		ltq_hw_irqdispatch(x);					\
-	}
-DEFINE_HWx_IRQDISPATCH(0)
-DEFINE_HWx_IRQDISPATCH(1)
-DEFINE_HWx_IRQDISPATCH(2)
-DEFINE_HWx_IRQDISPATCH(3)
-DEFINE_HWx_IRQDISPATCH(4)
-
-#if MIPS_CPU_TIMER_IRQ == 7
-static void ltq_hw5_irqdispatch(void)
-{
-	do_IRQ(MIPS_CPU_TIMER_IRQ);
-}
-#else
-DEFINE_HWx_IRQDISPATCH(5)
-#endif
-
-static void ltq_hw_irq_handler(struct irq_desc *desc)
-{
-	ltq_hw_irqdispatch(irq_desc_get_irq(desc) - 2);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-	int irq;
-
-	if (!pending) {
-		spurious_interrupt();
-		return;
-	}
-
-	pending >>= CAUSEB_IP;
-	while (pending) {
-		irq = fls(pending) - 1;
-		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-		pending &= ~BIT(irq);
-	}
-}
-
 static int icu_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
 {
 	struct irq_chip *chip = &ltq_irq_type;
@ -343,38 +303,13 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 	for (i = 0; i < MAX_IM; i++)
 		irq_set_chained_handler(i + 2, ltq_hw_irq_handler);

-	if (cpu_has_vint) {
-		pr_info("Setting up vectored interrupts\n");
-		set_vi_handler(2, ltq_hw0_irqdispatch);
-		set_vi_handler(3, ltq_hw1_irqdispatch);
-		set_vi_handler(4, ltq_hw2_irqdispatch);
-		set_vi_handler(5, ltq_hw3_irqdispatch);
-		set_vi_handler(6, ltq_hw4_irqdispatch);
-		set_vi_handler(7, ltq_hw5_irqdispatch);
-	}
-
 	ltq_domain = irq_domain_add_linear(node,
 		(MAX_IM * INT_NUM_IM_OFFSET) + MIPS_CPU_IRQ_CASCADE,
 		&irq_domain_ops, 0);

-#ifndef CONFIG_MIPS_MT_SMP
-	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 |
-		IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
-#else
-	set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ0 | IE_IRQ1 |
-		IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
-#endif
-
 	/* tell oprofile which irq to use */
 	ltq_perfcount_irq = irq_create_mapping(ltq_domain, LTQ_PERF_IRQ);

-	/*
-	 * if the timer irq is not one of the mips irqs we need to
-	 * create a mapping
-	 */
-	if (MIPS_CPU_TIMER_IRQ != 7)
-		irq_create_mapping(ltq_domain, MIPS_CPU_TIMER_IRQ);
-
 	/* the external interrupts are optional and xway only */
 	eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway");
 	if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) {
@ -411,7 +346,7 @@ EXPORT_SYMBOL_GPL(get_c0_perfcount_int);

 unsigned int get_c0_compare_int(void)
 {
-	return MIPS_CPU_TIMER_IRQ;
+	return CP0_LEGACY_COMPARE_IRQ;
 }

 static struct of_device_id __initdata of_irq_ids[] = {
--- a/arch/mips/pci/msi-octeon.c
+++ b/arch/mips/pci/msi-octeon.c
@ -369,7 +369,9 @@ int __init octeon_msi_initialize(void)
 	int irq;
 	struct irq_chip *msi;

-	if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_PCIE) {
+	if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_INVALID) {
+		return 0;
+	} else if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_PCIE) {
 		msi_rcv_reg[0] = CVMX_PEXP_NPEI_MSI_RCV0;
 		msi_rcv_reg[1] = CVMX_PEXP_NPEI_MSI_RCV1;
 		msi_rcv_reg[2] = CVMX_PEXP_NPEI_MSI_RCV2;
--- a/arch/nds32/Makefile
+++ b/arch/nds32/Makefile
@ -3,9 +3,6 @@ OBJCOPYFLAGS	:= -O binary -R .note -R .note.gnu.build-id -R .comment -S

 KBUILD_DEFCONFIG := defconfig

-comma = ,
-
-
 ifdef CONFIG_FUNCTION_TRACER
 arch-y += -malways-save-lp -mno-relax
 endif
@ -54,8 +51,6 @@ endif
 boot := arch/nds32/boot
 core-y += $(boot)/dts/

-.PHONY: FORCE
-
 Image: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@

@ -68,9 +63,6 @@ prepare: vdso_prepare
 vdso_prepare: prepare0
 	$(Q)$(MAKE) $(build)=arch/nds32/kernel/vdso include/generated/vdso-offsets.h

-CLEAN_FILES += include/asm-nds32/constants.h*
-
-# We use MRPROPER_FILES and CLEAN_FILES now
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)

--- a/arch/openrisc/Makefile
+++ b/arch/openrisc/Makefile
@ -20,7 +20,6 @@
 KBUILD_DEFCONFIG := or1ksim_defconfig

 OBJCOPYFLAGS    := -O binary -R .note -R .comment -S
-LDFLAGS_vmlinux :=
 LIBGCC 		:= $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)

 KBUILD_CFLAGS	+= -pipe -ffixed-r10 -D__linux__
@ -50,5 +49,3 @@ else
 BUILTIN_DTB := n
 endif
 core-$(BUILTIN_DTB) += arch/openrisc/boot/dts/
-
-all: vmlinux
--- a/arch/powerpc/include/uapi/asm/perf_regs.h
+++ b/arch/powerpc/include/uapi/asm/perf_regs.h
@ -47,6 +47,7 @@ enum perf_event_powerpc_regs {
 	PERF_REG_POWERPC_DAR,
 	PERF_REG_POWERPC_DSISR,
 	PERF_REG_POWERPC_SIER,
+	PERF_REG_POWERPC_MMCRA,
 	PERF_REG_POWERPC_MAX,
 };
 #endif /* _UAPI_ASM_POWERPC_PERF_REGS_H */
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@ -852,11 +852,12 @@ start_here:

 	/* set up the PTE pointers for the Abatron bdiGDB.
 	*/
-	tovirt(r6,r6)
 	lis	r5, abatron_pteptrs@h
 	ori	r5, r5, abatron_pteptrs@l
 	stw	r5, 0xf0(0)	/* Must match your Abatron config file */
 	tophys(r5,r5)
+	lis	r6, swapper_pg_dir@h
+	ori	r6, r6, swapper_pg_dir@l
 	stw	r6, 0(r5)

 /* Now turn on the MMU for real! */
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@ -755,11 +755,12 @@ SYSCALL_DEFINE0(rt_sigreturn)
 		if (restore_tm_sigcontexts(current, &uc->uc_mcontext,
 					   &uc_transact->uc_mcontext))
 			goto badframe;
-	}
+	} else
 #endif
-	/* Fall through, for non-TM restore */
-	if (!MSR_TM_ACTIVE(msr)) {
+	{
 		/*
+		 * Fall through, for non-TM restore
+		 *
 		 * Unset MSR[TS] on the thread regs since MSR from user
 		 * context does not have MSR active, and recheckpoint was
 		 * not called since restore_tm_sigcontexts() was not called
--- a/arch/powerpc/kernel/trace/ftrace.c
+++ b/arch/powerpc/kernel/trace/ftrace.c
@ -967,13 +967,6 @@ unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip)
 }
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */

-#if defined(CONFIG_FTRACE_SYSCALLS) && defined(CONFIG_PPC64)
-unsigned long __init arch_syscall_addr(int nr)
-{
-	return sys_call_table[nr*2];
-}
-#endif /* CONFIG_FTRACE_SYSCALLS && CONFIG_PPC64 */
-
 #ifdef PPC64_ELF_ABI_v1
 char *arch_ftrace_match_adjust(char *str, const char *search)
 {
--- a/arch/powerpc/perf/perf_regs.c
+++ b/arch/powerpc/perf/perf_regs.c
@ -70,6 +70,7 @@ static unsigned int pt_regs_offset[PERF_REG_POWERPC_MAX] = {
 	PT_REGS_OFFSET(PERF_REG_POWERPC_DAR, dar),
 	PT_REGS_OFFSET(PERF_REG_POWERPC_DSISR, dsisr),
 	PT_REGS_OFFSET(PERF_REG_POWERPC_SIER, dar),
+	PT_REGS_OFFSET(PERF_REG_POWERPC_MMCRA, dsisr),
 };

 u64 perf_reg_value(struct pt_regs *regs, int idx)
@ -83,6 +84,11 @@ u64 perf_reg_value(struct pt_regs *regs, int idx)
 	    !is_sier_available()))
 		return 0;

+	if (idx == PERF_REG_POWERPC_MMCRA &&
+	   (IS_ENABLED(CONFIG_FSL_EMB_PERF_EVENT) ||
+	    IS_ENABLED(CONFIG_PPC32)))
+		return 0;
+
 	return regs_get_register(regs, pt_regs_offset[idx]);
 }

--- a/arch/powerpc/platforms/4xx/ocm.c
+++ b/arch/powerpc/platforms/4xx/ocm.c
@ -237,12 +237,12 @@ static int ocm_debugfs_show(struct seq_file *m, void *v)
 			continue;

 		seq_printf(m, "PPC4XX OCM   : %d\n", ocm->index);
-		seq_printf(m, "PhysAddr     : %pa[p]\n", &(ocm->phys));
+		seq_printf(m, "PhysAddr     : %pa\n", &(ocm->phys));
 		seq_printf(m, "MemTotal     : %d Bytes\n", ocm->memtotal);
 		seq_printf(m, "MemTotal(NC) : %d Bytes\n", ocm->nc.memtotal);
 		seq_printf(m, "MemTotal(C)  : %d Bytes\n\n", ocm->c.memtotal);

-		seq_printf(m, "NC.PhysAddr  : %pa[p]\n", &(ocm->nc.phys));
+		seq_printf(m, "NC.PhysAddr  : %pa\n", &(ocm->nc.phys));
 		seq_printf(m, "NC.VirtAddr  : 0x%p\n", ocm->nc.virt);
 		seq_printf(m, "NC.MemTotal  : %d Bytes\n", ocm->nc.memtotal);
 		seq_printf(m, "NC.MemFree   : %d Bytes\n", ocm->nc.memfree);
@ -252,7 +252,7 @@ static int ocm_debugfs_show(struct seq_file *m, void *v)
 							blk->size, blk->owner);
 		}

-		seq_printf(m, "\nC.PhysAddr   : %pa[p]\n", &(ocm->c.phys));
+		seq_printf(m, "\nC.PhysAddr   : %pa\n", &(ocm->c.phys));
 		seq_printf(m, "C.VirtAddr   : 0x%p\n", ocm->c.virt);
 		seq_printf(m, "C.MemTotal   : %d Bytes\n", ocm->c.memtotal);
 		seq_printf(m, "C.MemFree    : %d Bytes\n", ocm->c.memfree);
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@ -538,8 +538,7 @@ static void __init chrp_init_IRQ(void)
 	/* see if there is a keyboard in the device tree
 	   with a parent of type "adb" */
 	for_each_node_by_name(kbd, "keyboard")
-		if (kbd->parent && kbd->parent->type
-		    && strcmp(kbd->parent->type, "adb") == 0)
+		if (of_node_is_type(kbd->parent, "adb"))
 			break;
 	of_node_put(kbd);
 	if (kbd)
--- a/arch/powerpc/platforms/powernv/npu-dma.c
+++ b/arch/powerpc/platforms/powernv/npu-dma.c
@ -564,7 +564,7 @@ struct iommu_table_group *pnv_try_setup_npu_table_group(struct pnv_ioda_pe *pe)
 		}
 	} else {
 		/* Create a group for 1 GPU and attached NPUs for POWER8 */
-		pe->npucomp = kzalloc(sizeof(pe->npucomp), GFP_KERNEL);
+		pe->npucomp = kzalloc(sizeof(*pe->npucomp), GFP_KERNEL);
 		table_group = &pe->npucomp->table_group;
 		table_group->ops = &pnv_npu_peers_ops;
 		iommu_register_group(table_group, hose->global_number,
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@ -2681,7 +2681,8 @@ static void pnv_pci_ioda_setup_iommu_api(void)
 	list_for_each_entry(hose, &hose_list, list_node) {
 		phb = hose->private_data;

-		if (phb->type == PNV_PHB_NPU_NVLINK)
+		if (phb->type == PNV_PHB_NPU_NVLINK ||
+		    phb->type == PNV_PHB_NPU_OCAPI)
 			continue;

 		list_for_each_entry(pe, &phb->ioda.pe_list, list) {
--- a/arch/powerpc/platforms/pseries/pci.c
+++ b/arch/powerpc/platforms/pseries/pci.c
@ -264,7 +264,9 @@ void __init pSeries_final_fixup(void)
 			if (!of_device_is_compatible(nvdn->parent,
 						"ibm,power9-npu"))
 				continue;
+#ifdef CONFIG_PPC_POWERNV
 			WARN_ON_ONCE(pnv_npu2_init(hose));
+#endif
 			break;
 		}
 	}
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@ -25,7 +25,7 @@ static inline int init_new_context(struct task_struct *tsk,
 	atomic_set(&mm->context.flush_count, 0);
 	mm->context.gmap_asce = 0;
 	mm->context.flush_mm = 0;
-	mm->context.compat_mm = 0;
+	mm->context.compat_mm = test_thread_flag(TIF_31BIT);
 #ifdef CONFIG_PGSTE
 	mm->context.alloc_pgste = page_table_allocate_pgste ||
 		test_thread_flag(TIF_PGSTE) ||
@ -90,8 +90,6 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 {
 	int cpu = smp_processor_id();

-	if (prev == next)
-		return;
 	S390_lowcore.user_asce = next->context.asce;
 	cpumask_set_cpu(cpu, &next->context.cpu_attach_mask);
 	/* Clear previous user-ASCE from CR1 and CR7 */
@ -103,7 +101,8 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 		__ctl_load(S390_lowcore.vdso_asce, 7, 7);
 		clear_cpu_flag(CIF_ASCE_SECONDARY);
 	}
-	cpumask_clear_cpu(cpu, &prev->context.cpu_attach_mask);
+	if (prev != next)
+		cpumask_clear_cpu(cpu, &prev->context.cpu_attach_mask);
 }

 #define finish_arch_post_lock_switch finish_arch_post_lock_switch
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@ -63,10 +63,10 @@ static noinline __init void detect_machine_type(void)
 	if (stsi(vmms, 3, 2, 2) || !vmms->count)
 		return;

-	/* Running under KVM? If not we assume z/VM */
+	/* Detect known hypervisors */
 	if (!memcmp(vmms->vm[0].cpi, "\xd2\xe5\xd4", 3))
 		S390_lowcore.machine_flags |= MACHINE_FLAG_KVM;
-	else
+	else if (!memcmp(vmms->vm[0].cpi, "\xa9\x61\xe5\xd4", 4))
 		S390_lowcore.machine_flags |= MACHINE_FLAG_VM;
 }

--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@ -1006,6 +1006,8 @@ void __init setup_arch(char **cmdline_p)
 		pr_info("Linux is running under KVM in 64-bit mode\n");
 	else if (MACHINE_IS_LPAR)
 		pr_info("Linux is running natively in 64-bit mode\n");
+	else
+		pr_info("Linux is running as a guest in 64-bit mode\n");

 	/* Have one command line that is parsed and saved in /proc/cmdline */
 	/* boot_command_line has been already set up in early.c */
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@ -381,8 +381,13 @@ void smp_call_online_cpu(void (*func)(void *), void *data)
 */
 void smp_call_ipl_cpu(void (*func)(void *), void *data)
 {
+	struct lowcore *lc = pcpu_devices->lowcore;
+
+	if (pcpu_devices[0].address == stap())
+		lc = &S390_lowcore;
+
 	pcpu_delegate(&pcpu_devices[0], func, data,
-		      pcpu_devices->lowcore->nodat_stack);
+		      lc->nodat_stack);
 }

 int smp_find_processor_id(u16 address)
@ -1166,7 +1171,11 @@ static ssize_t __ref rescan_store(struct device *dev,
 {
 	int rc;

+	rc = lock_device_hotplug_sysfs();
+	if (rc)
+		return rc;
 	rc = smp_rescan_cpus();
+	unlock_device_hotplug();
 	return rc ? rc : count;
 }
 static DEVICE_ATTR_WO(rescan);
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@ -224,10 +224,9 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)

 	vdso_pages = vdso64_pages;
 #ifdef CONFIG_COMPAT
-	if (is_compat_task()) {
+	mm->context.compat_mm = is_compat_task();
+	if (mm->context.compat_mm)
 		vdso_pages = vdso32_pages;
-		mm->context.compat_mm = 1;
-	}
 #endif
 	/*
 	 * vDSO has a problem and was disabled, just don't "enable" it for
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@ -198,7 +198,7 @@ config X86
 	select IRQ_FORCED_THREADING
 	select NEED_SG_DMA_LENGTH
 	select PCI_DOMAINS			if PCI
-	select PCI_LOCKLESS_CONFIG
+	select PCI_LOCKLESS_CONFIG		if PCI
 	select PERF_EVENTS
 	select RTC_LIB
 	select RTC_MC146818_LIB
@ -617,7 +617,7 @@ config X86_INTEL_QUARK

 config X86_INTEL_LPSS
 	bool "Intel Low Power Subsystem Support"
-	depends on X86 && ACPI
+	depends on X86 && ACPI && PCI
 	select COMMON_CLK
 	select PINCTRL
 	select IOSF_MBI
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@ -361,7 +361,8 @@ ENTRY(entry_INT80_compat)

 	/* Need to switch before accessing the thread stack. */
 	SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi
-	movq	%rsp, %rdi
+	/* In the Xen PV case we already run on the thread stack. */
+	ALTERNATIVE "movq %rsp, %rdi", "jmp .Lint80_keep_stack", X86_FEATURE_XENPV
 	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp

 	pushq	6*8(%rdi)		/* regs->ss */
@ -370,8 +371,9 @@ ENTRY(entry_INT80_compat)
 	pushq	3*8(%rdi)		/* regs->cs */
 	pushq	2*8(%rdi)		/* regs->ip */
 	pushq	1*8(%rdi)		/* regs->orig_ax */
-
 	pushq	(%rdi)			/* pt_regs->di */
+.Lint80_keep_stack:
+
 	pushq	%rsi			/* pt_regs->si */
 	xorl	%esi, %esi		/* nospec   si */
 	pushq	%rdx			/* pt_regs->dx */
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@ -178,6 +178,10 @@ static inline void switch_ldt(struct mm_struct *prev, struct mm_struct *next)

 void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk);

+/*
+ * Init a new mm.  Used on mm copies, like at fork()
+ * and on mm's that are brand-new, like at execve().
+ */
 static inline int init_new_context(struct task_struct *tsk,
 				   struct mm_struct *mm)
 {
@ -228,8 +232,22 @@ do {						\
 } while (0)
 #endif

+static inline void arch_dup_pkeys(struct mm_struct *oldmm,
+				  struct mm_struct *mm)
+{
+#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
+	if (!cpu_feature_enabled(X86_FEATURE_OSPKE))
+		return;
+
+	/* Duplicate the oldmm pkey state in mm: */
+	mm->context.pkey_allocation_map = oldmm->context.pkey_allocation_map;
+	mm->context.execute_only_pkey   = oldmm->context.execute_only_pkey;
+#endif
+}
+
 static inline int arch_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm)
 {
+	arch_dup_pkeys(oldmm, mm);
 	paravirt_arch_dup_mmap(oldmm, mm);
 	return ldt_dup_context(oldmm, mm);
 }
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@ -711,7 +711,7 @@ static __must_check inline bool user_access_begin(const void __user *ptr, size_t
 {
 	if (unlikely(!access_ok(ptr,len)))
 		return 0;
-	__uaccess_begin();
+	__uaccess_begin_nospec();
 	return 1;
 }
 #define user_access_begin(a,b)	user_access_begin(a,b)
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@ -470,6 +470,7 @@ int crash_load_segments(struct kimage *image)

 	kbuf.memsz = kbuf.bufsz;
 	kbuf.buf_align = ELF_CORE_HEADER_ALIGN;
+	kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
 	ret = kexec_add_buffer(&kbuf);
 	if (ret) {
 		vfree((void *)image->arch.elf_headers);
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@ -21,10 +21,6 @@

 #define HPET_MASK			CLOCKSOURCE_MASK(32)

-/* FSEC = 10^-15
-   NSEC = 10^-9 */
-#define FSEC_PER_NSEC			1000000L
-
 #define HPET_DEV_USED_BIT		2
 #define HPET_DEV_USED			(1 << HPET_DEV_USED_BIT)
 #define HPET_DEV_VALID			0x8
--- a/arch/x86/kernel/kexec-bzimage64.c
+++ b/arch/x86/kernel/kexec-bzimage64.c
@ -434,6 +434,7 @@ static void *bzImage64_load(struct kimage *image, char *kernel,
 	kbuf.memsz = PAGE_ALIGN(header->init_size);
 	kbuf.buf_align = header->kernel_alignment;
 	kbuf.buf_min = MIN_KERNEL_LOAD_ADDR;
+	kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
 	ret = kexec_add_buffer(&kbuf);
 	if (ret)
 		goto out_free_params;
@ -448,6 +449,7 @@ static void *bzImage64_load(struct kimage *image, char *kernel,
 		kbuf.bufsz = kbuf.memsz = initrd_len;
 		kbuf.buf_align = PAGE_SIZE;
 		kbuf.buf_min = MIN_INITRD_LOAD_ADDR;
+		kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
 		ret = kexec_add_buffer(&kbuf);
 		if (ret)
 			goto out_free_params;
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@ -457,6 +457,7 @@ static void __send_ipi_mask(const struct cpumask *mask, int vector)
 #else
 	u64 ipi_bitmap = 0;
 #endif
+	long ret;

 	if (cpumask_empty(mask))
 		return;
@ -482,8 +483,9 @@ static void __send_ipi_mask(const struct cpumask *mask, int vector)
 		} else if (apic_id < min + KVM_IPI_CLUSTER_SIZE) {
 			max = apic_id < max ? max : apic_id;
 		} else {
-			kvm_hypercall4(KVM_HC_SEND_IPI, (unsigned long)ipi_bitmap,
+			ret = kvm_hypercall4(KVM_HC_SEND_IPI, (unsigned long)ipi_bitmap,
 				(unsigned long)(ipi_bitmap >> BITS_PER_LONG), min, icr);
+			WARN_ONCE(ret < 0, "KVM: failed to send PV IPI: %ld", ret);
 			min = max = apic_id;
 			ipi_bitmap = 0;
 		}
@ -491,8 +493,9 @@ static void __send_ipi_mask(const struct cpumask *mask, int vector)
 	}

 	if (ipi_bitmap) {
-		kvm_hypercall4(KVM_HC_SEND_IPI, (unsigned long)ipi_bitmap,
+		ret = kvm_hypercall4(KVM_HC_SEND_IPI, (unsigned long)ipi_bitmap,
 			(unsigned long)(ipi_bitmap >> BITS_PER_LONG), min, icr);
+		WARN_ONCE(ret < 0, "KVM: failed to send PV IPI: %ld", ret);
 	}

 	local_irq_restore(flags);
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@ -297,15 +297,16 @@ static int __init tsc_setup(char *str)

 __setup("tsc=", tsc_setup);

-#define MAX_RETRIES     5
-#define SMI_TRESHOLD    50000
+#define MAX_RETRIES		5
+#define TSC_DEFAULT_THRESHOLD	0x20000

 /*
- * Read TSC and the reference counters. Take care of SMI disturbance
+ * Read TSC and the reference counters. Take care of any disturbances
 */
 static u64 tsc_read_refs(u64 *p, int hpet)
 {
 	u64 t1, t2;
+	u64 thresh = tsc_khz ? tsc_khz >> 5 : TSC_DEFAULT_THRESHOLD;
 	int i;

 	for (i = 0; i < MAX_RETRIES; i++) {
@ -315,7 +316,7 @@ static u64 tsc_read_refs(u64 *p, int hpet)
 		else
 			*p = acpi_pm_read_early();
 		t2 = get_cycles();
-		if ((t2 - t1) < SMI_TRESHOLD)
+		if ((t2 - t1) < thresh)
 			return t2;
 	}
 	return ULLONG_MAX;
@ -703,15 +704,15 @@ static unsigned long pit_hpet_ptimer_calibrate_cpu(void)
 	 * zero. In each wait loop iteration we read the TSC and check
 	 * the delta to the previous read. We keep track of the min
 	 * and max values of that delta. The delta is mostly defined
-	 * by the IO time of the PIT access, so we can detect when a
-	 * SMI/SMM disturbance happened between the two reads. If the
+	 * by the IO time of the PIT access, so we can detect when
+	 * any disturbance happened between the two reads. If the
 	 * maximum time is significantly larger than the minimum time,
 	 * then we discard the result and have another try.
 	 *
 	 * 2) Reference counter. If available we use the HPET or the
 	 * PMTIMER as a reference to check the sanity of that value.
 	 * We use separate TSC readouts and check inside of the
-	 * reference read for a SMI/SMM disturbance. We dicard
+	 * reference read for any possible disturbance. We dicard
 	 * disturbed values here as well. We do that around the PIT
 	 * calibration delay loop as we have to wait for a certain
 	 * amount of time anyway.
@ -744,7 +745,7 @@ static unsigned long pit_hpet_ptimer_calibrate_cpu(void)
 		if (ref1 == ref2)
 			continue;

-		/* Check, whether the sampling was disturbed by an SMI */
+		/* Check, whether the sampling was disturbed */
 		if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX)
 			continue;

@ -1268,7 +1269,7 @@ static DECLARE_DELAYED_WORK(tsc_irqwork, tsc_refine_calibration_work);
 */
 static void tsc_refine_calibration_work(struct work_struct *work)
 {
-	static u64 tsc_start = -1, ref_start;
+	static u64 tsc_start = ULLONG_MAX, ref_start;
 	static int hpet;
 	u64 tsc_stop, ref_stop, delta;
 	unsigned long freq;
@ -1283,14 +1284,15 @@ static void tsc_refine_calibration_work(struct work_struct *work)
 	 * delayed the first time we expire. So set the workqueue
 	 * again once we know timers are working.
 	 */
-	if (tsc_start == -1) {
+	if (tsc_start == ULLONG_MAX) {
+restart:
 		/*
 		 * Only set hpet once, to avoid mixing hardware
 		 * if the hpet becomes enabled later.
 		 */
 		hpet = is_hpet_enabled();
-		schedule_delayed_work(&tsc_irqwork, HZ);
 		tsc_start = tsc_read_refs(&ref_start, hpet);
+		schedule_delayed_work(&tsc_irqwork, HZ);
 		return;
 	}

@ -1300,9 +1302,9 @@ static void tsc_refine_calibration_work(struct work_struct *work)
 	if (ref_start == ref_stop)
 		goto out;

-	/* Check, whether the sampling was disturbed by an SMI */
-	if (tsc_start == ULLONG_MAX || tsc_stop == ULLONG_MAX)
-		goto out;
+	/* Check, whether the sampling was disturbed */
+	if (tsc_stop == ULLONG_MAX)
+		goto restart;

 	delta = tsc_stop - tsc_start;
 	delta *= 1000000LL;
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@ -2,10 +2,6 @@

 ccflags-y += -Iarch/x86/kvm

-CFLAGS_x86.o := -I.
-CFLAGS_svm.o := -I.
-CFLAGS_vmx.o := -I.
-
 KVM := ../../../virt/kvm

 kvm-y			+= $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o \
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@ -1636,7 +1636,7 @@ int kvm_hv_hypercall(struct kvm_vcpu *vcpu)
 		ret = kvm_hvcall_signal_event(vcpu, fast, ingpa);
 		if (ret != HV_STATUS_INVALID_PORT_ID)
 			break;
-		/* maybe userspace knows this conn_id: fall through */
+		/* fall through - maybe userspace knows this conn_id. */
 	case HVCALL_POST_MESSAGE:
 		/* don't bother userspace if it has no way to handle it */
 		if (unlikely(rep || !vcpu_to_synic(vcpu)->active)) {
@ -1832,7 +1832,6 @@ int kvm_vcpu_ioctl_get_hv_cpuid(struct kvm_vcpu *vcpu, struct kvm_cpuid2 *cpuid,
 			ent->eax |= HV_X64_MSR_VP_INDEX_AVAILABLE;
 			ent->eax |= HV_X64_MSR_RESET_AVAILABLE;
 			ent->eax |= HV_MSR_REFERENCE_TSC_AVAILABLE;
-			ent->eax |= HV_X64_MSR_GUEST_IDLE_AVAILABLE;
 			ent->eax |= HV_X64_ACCESS_FREQUENCY_MSRS;
 			ent->eax |= HV_X64_ACCESS_REENLIGHTENMENT;

@ -1848,11 +1847,11 @@ int kvm_vcpu_ioctl_get_hv_cpuid(struct kvm_vcpu *vcpu, struct kvm_cpuid2 *cpuid,
 		case HYPERV_CPUID_ENLIGHTMENT_INFO:
 			ent->eax |= HV_X64_REMOTE_TLB_FLUSH_RECOMMENDED;
 			ent->eax |= HV_X64_APIC_ACCESS_RECOMMENDED;
-			ent->eax |= HV_X64_SYSTEM_RESET_RECOMMENDED;
 			ent->eax |= HV_X64_RELAXED_TIMING_RECOMMENDED;
 			ent->eax |= HV_X64_CLUSTER_IPI_RECOMMENDED;
 			ent->eax |= HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED;
-			ent->eax |= HV_X64_ENLIGHTENED_VMCS_RECOMMENDED;
+			if (evmcs_ver)
+				ent->eax |= HV_X64_ENLIGHTENED_VMCS_RECOMMENDED;

 			/*
 			 * Default number of spinlock retry attempts, matches
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@ -1035,6 +1035,7 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 	switch (delivery_mode) {
 	case APIC_DM_LOWEST:
 		vcpu->arch.apic_arb_prio++;
+		/* fall through */
 	case APIC_DM_FIXED:
 		if (unlikely(trig_mode && !level))
 			break;
@ -1874,6 +1875,7 @@ int kvm_lapic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)

 	case APIC_LVT0:
 		apic_manage_nmi_watchdog(apic, val);
+		/* fall through */
 	case APIC_LVTTHMR:
 	case APIC_LVTPC:
 	case APIC_LVT1:
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@ -4371,6 +4371,7 @@ __reset_rsvds_bits_mask(struct kvm_vcpu *vcpu,
 			rsvd_bits(maxphyaddr, 51);
 		rsvd_check->rsvd_bits_mask[1][4] =
 			rsvd_check->rsvd_bits_mask[0][4];
+		/* fall through */
 	case PT64_ROOT_4LEVEL:
 		rsvd_check->rsvd_bits_mask[0][3] = exb_bit_rsvd |
 			nonleaf_bit8_rsvd | rsvd_bits(7, 7) |
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@ -3414,6 +3414,14 @@ static int nested_svm_vmexit(struct vcpu_svm *svm)
 	kvm_mmu_reset_context(&svm->vcpu);
 	kvm_mmu_load(&svm->vcpu);

+	/*
+	 * Drop what we picked up for L2 via svm_complete_interrupts() so it
+	 * doesn't end up in L1.
+	 */
+	svm->vcpu.arch.nmi_injected = false;
+	kvm_clear_exception_queue(&svm->vcpu);
+	kvm_clear_interrupt_queue(&svm->vcpu);
+
 	return 0;
 }

@ -4395,7 +4403,7 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr)
 	case MSR_IA32_APICBASE:
 		if (kvm_vcpu_apicv_active(vcpu))
 			avic_update_vapic_bar(to_svm(vcpu), data);
-		/* Follow through */
+		/* Fall through */
 	default:
 		return kvm_set_msr_common(vcpu, msr);
 	}
@ -4504,28 +4512,19 @@ static int avic_incomplete_ipi_interception(struct vcpu_svm *svm)
 		kvm_lapic_reg_write(apic, APIC_ICR, icrl);
 		break;
 	case AVIC_IPI_FAILURE_TARGET_NOT_RUNNING: {
-		int i;
-		struct kvm_vcpu *vcpu;
-		struct kvm *kvm = svm->vcpu.kvm;
 		struct kvm_lapic *apic = svm->vcpu.arch.apic;

 		/*
-		 * At this point, we expect that the AVIC HW has already
-		 * set the appropriate IRR bits on the valid target
-		 * vcpus. So, we just need to kick the appropriate vcpu.
+		 * Update ICR high and low, then emulate sending IPI,
+		 * which is handled when writing APIC_ICR.
 		 */
-		kvm_for_each_vcpu(i, vcpu, kvm) {
-			bool m = kvm_apic_match_dest(vcpu, apic,
-						     icrl & KVM_APIC_SHORT_MASK,
-						     GET_APIC_DEST_FIELD(icrh),
-						     icrl & KVM_APIC_DEST_MASK);
-
-			if (m && !avic_vcpu_is_running(vcpu))
-				kvm_vcpu_wake_up(vcpu);
-		}
+		kvm_lapic_reg_write(apic, APIC_ICR2, icrh);
+		kvm_lapic_reg_write(apic, APIC_ICR, icrl);
 		break;
 	}
 	case AVIC_IPI_FAILURE_INVALID_TARGET:
+		WARN_ONCE(1, "Invalid IPI target: index=%u, vcpu=%d, icr=%#0x:%#0x\n",
+			  index, svm->vcpu.vcpu_id, icrh, icrl);
 		break;
 	case AVIC_IPI_FAILURE_INVALID_BACKING_PAGE:
 		WARN_ONCE(1, "Invalid backing page\n");
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@ -1465,7 +1465,7 @@ TRACE_EVENT(kvm_hv_send_ipi_ex,
 #endif /* _TRACE_KVM_H */

 #undef TRACE_INCLUDE_PATH
-#define TRACE_INCLUDE_PATH arch/x86/kvm
+#define TRACE_INCLUDE_PATH ../../arch/x86/kvm
 #undef TRACE_INCLUDE_FILE
 #define TRACE_INCLUDE_FILE trace

--- a/arch/x86/kvm/vmx/evmcs.c
+++ b/arch/x86/kvm/vmx/evmcs.c
@ -332,16 +332,17 @@ int nested_enable_evmcs(struct kvm_vcpu *vcpu,
 			uint16_t *vmcs_version)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	bool evmcs_already_enabled = vmx->nested.enlightened_vmcs_enabled;
+
+	vmx->nested.enlightened_vmcs_enabled = true;

 	if (vmcs_version)
 		*vmcs_version = nested_get_evmcs_version(vcpu);

 	/* We don't support disabling the feature for simplicity. */
-	if (vmx->nested.enlightened_vmcs_enabled)
+	if (evmcs_already_enabled)
 		return 0;

-	vmx->nested.enlightened_vmcs_enabled = true;
-
 	vmx->nested.msrs.pinbased_ctls_high &= ~EVMCS1_UNSUPPORTED_PINCTRL;
 	vmx->nested.msrs.entry_ctls_high &= ~EVMCS1_UNSUPPORTED_VMENTRY_CTRL;
 	vmx->nested.msrs.exit_ctls_high &= ~EVMCS1_UNSUPPORTED_VMEXIT_CTRL;
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@ -55,7 +55,7 @@ static u16 shadow_read_write_fields[] = {
 static int max_shadow_read_write_fields =
 	ARRAY_SIZE(shadow_read_write_fields);

-void init_vmcs_shadow_fields(void)
+static void init_vmcs_shadow_fields(void)
 {
 	int i, j;

@ -4140,11 +4140,11 @@ static int enter_vmx_operation(struct kvm_vcpu *vcpu)
 	if (r < 0)
 		goto out_vmcs02;

-	vmx->nested.cached_vmcs12 = kmalloc(VMCS12_SIZE, GFP_KERNEL);
+	vmx->nested.cached_vmcs12 = kzalloc(VMCS12_SIZE, GFP_KERNEL);
 	if (!vmx->nested.cached_vmcs12)
 		goto out_cached_vmcs12;

-	vmx->nested.cached_shadow_vmcs12 = kmalloc(VMCS12_SIZE, GFP_KERNEL);
+	vmx->nested.cached_shadow_vmcs12 = kzalloc(VMCS12_SIZE, GFP_KERNEL);
 	if (!vmx->nested.cached_shadow_vmcs12)
 		goto out_cached_shadow_vmcs12;

@ -5263,13 +5263,17 @@ static int vmx_get_nested_state(struct kvm_vcpu *vcpu,
 			copy_shadow_to_vmcs12(vmx);
 	}

-	if (copy_to_user(user_kvm_nested_state->data, vmcs12, sizeof(*vmcs12)))
+	/*
+	 * Copy over the full allocated size of vmcs12 rather than just the size
+	 * of the struct.
+	 */
+	if (copy_to_user(user_kvm_nested_state->data, vmcs12, VMCS12_SIZE))
 		return -EFAULT;

 	if (nested_cpu_has_shadow_vmcs(vmcs12) &&
 	    vmcs12->vmcs_link_pointer != -1ull) {
 		if (copy_to_user(user_kvm_nested_state->data + VMCS12_SIZE,
-				 get_shadow_vmcs12(vcpu), sizeof(*vmcs12)))
+				 get_shadow_vmcs12(vcpu), VMCS12_SIZE))
 			return -EFAULT;
 	}

--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@ -423,7 +423,7 @@ static void check_ept_pointer_match(struct kvm *kvm)
 	to_kvm_vmx(kvm)->ept_pointers_match = EPT_POINTERS_MATCH;
 }

-int kvm_fill_hv_flush_list_func(struct hv_guest_mapping_flush_list *flush,
+static int kvm_fill_hv_flush_list_func(struct hv_guest_mapping_flush_list *flush,
 		void *data)
 {
 	struct kvm_tlb_range *range = data;
@ -1773,7 +1773,7 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		if (!msr_info->host_initiated &&
 		    !guest_cpuid_has(vcpu, X86_FEATURE_RDTSCP))
 			return 1;
-		/* Otherwise falls through */
+		/* Else, falls through */
 	default:
 		msr = find_msr_entry(vmx, msr_info->index);
 		if (msr) {
@ -2014,7 +2014,7 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		/* Check reserved bit, higher 32 bits should be zero */
 		if ((data >> 32) != 0)
 			return 1;
-		/* Otherwise falls through */
+		/* Else, falls through */
 	default:
 		msr = find_msr_entry(vmx, msr_index);
 		if (msr) {
@ -2344,7 +2344,7 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 		case 37: /* AAT100 */
 		case 44: /* BC86,AAY89,BD102 */
 		case 46: /* BA97 */
-			_vmexit_control &= ~VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL;
+			_vmentry_control &= ~VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL;
 			_vmexit_control &= ~VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL;
 			pr_warn_once("kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL "
 					"does not work properly. Using workaround\n");
@ -6362,72 +6362,9 @@ static void vmx_update_hv_timer(struct kvm_vcpu *vcpu)
 	vmx->loaded_vmcs->hv_timer_armed = false;
 }

-static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
+static void __vmx_vcpu_run(struct kvm_vcpu *vcpu, struct vcpu_vmx *vmx)
 {
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	unsigned long cr3, cr4, evmcs_rsp;
-
-	/* Record the guest's net vcpu time for enforced NMI injections. */
-	if (unlikely(!enable_vnmi &&
-		     vmx->loaded_vmcs->soft_vnmi_blocked))
-		vmx->loaded_vmcs->entry_time = ktime_get();
-
-	/* Don't enter VMX if guest state is invalid, let the exit handler
-	   start emulation until we arrive back to a valid state */
-	if (vmx->emulation_required)
-		return;
-
-	if (vmx->ple_window_dirty) {
-		vmx->ple_window_dirty = false;
-		vmcs_write32(PLE_WINDOW, vmx->ple_window);
-	}
-
-	if (vmx->nested.need_vmcs12_sync)
-		nested_sync_from_vmcs12(vcpu);
-
-	if (test_bit(VCPU_REGS_RSP, (unsigned long *)&vcpu->arch.regs_dirty))
-		vmcs_writel(GUEST_RSP, vcpu->arch.regs[VCPU_REGS_RSP]);
-	if (test_bit(VCPU_REGS_RIP, (unsigned long *)&vcpu->arch.regs_dirty))
-		vmcs_writel(GUEST_RIP, vcpu->arch.regs[VCPU_REGS_RIP]);
-
-	cr3 = __get_current_cr3_fast();
-	if (unlikely(cr3 != vmx->loaded_vmcs->host_state.cr3)) {
-		vmcs_writel(HOST_CR3, cr3);
-		vmx->loaded_vmcs->host_state.cr3 = cr3;
-	}
-
-	cr4 = cr4_read_shadow();
-	if (unlikely(cr4 != vmx->loaded_vmcs->host_state.cr4)) {
-		vmcs_writel(HOST_CR4, cr4);
-		vmx->loaded_vmcs->host_state.cr4 = cr4;
-	}
-
-	/* When single-stepping over STI and MOV SS, we must clear the
-	 * corresponding interruptibility bits in the guest state. Otherwise
-	 * vmentry fails as it then expects bit 14 (BS) in pending debug
-	 * exceptions being set, but that's not correct for the guest debugging
-	 * case. */
-	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
-		vmx_set_interrupt_shadow(vcpu, 0);
-
-	if (static_cpu_has(X86_FEATURE_PKU) &&
-	    kvm_read_cr4_bits(vcpu, X86_CR4_PKE) &&
-	    vcpu->arch.pkru != vmx->host_pkru)
-		__write_pkru(vcpu->arch.pkru);
-
-	pt_guest_enter(vmx);
-
-	atomic_switch_perf_msrs(vmx);
-
-	vmx_update_hv_timer(vcpu);
-
-	/*
-	 * If this vCPU has touched SPEC_CTRL, restore the guest's value if
-	 * it's non-zero. Since vmentry is serialising on affected CPUs, there
-	 * is no need to worry about the conditional branch over the wrmsr
-	 * being speculatively taken.
-	 */
-	x86_spec_ctrl_set_guest(vmx->spec_ctrl, 0);
+	unsigned long evmcs_rsp;

 	vmx->__launched = vmx->loaded_vmcs->launched;

@ -6567,6 +6504,77 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
 		, "eax", "ebx", "edi"
 #endif
 	      );
+}
+STACK_FRAME_NON_STANDARD(__vmx_vcpu_run);
+
+static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
+{
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	unsigned long cr3, cr4;
+
+	/* Record the guest's net vcpu time for enforced NMI injections. */
+	if (unlikely(!enable_vnmi &&
+		     vmx->loaded_vmcs->soft_vnmi_blocked))
+		vmx->loaded_vmcs->entry_time = ktime_get();
+
+	/* Don't enter VMX if guest state is invalid, let the exit handler
+	   start emulation until we arrive back to a valid state */
+	if (vmx->emulation_required)
+		return;
+
+	if (vmx->ple_window_dirty) {
+		vmx->ple_window_dirty = false;
+		vmcs_write32(PLE_WINDOW, vmx->ple_window);
+	}
+
+	if (vmx->nested.need_vmcs12_sync)
+		nested_sync_from_vmcs12(vcpu);
+
+	if (test_bit(VCPU_REGS_RSP, (unsigned long *)&vcpu->arch.regs_dirty))
+		vmcs_writel(GUEST_RSP, vcpu->arch.regs[VCPU_REGS_RSP]);
+	if (test_bit(VCPU_REGS_RIP, (unsigned long *)&vcpu->arch.regs_dirty))
+		vmcs_writel(GUEST_RIP, vcpu->arch.regs[VCPU_REGS_RIP]);
+
+	cr3 = __get_current_cr3_fast();
+	if (unlikely(cr3 != vmx->loaded_vmcs->host_state.cr3)) {
+		vmcs_writel(HOST_CR3, cr3);
+		vmx->loaded_vmcs->host_state.cr3 = cr3;
+	}
+
+	cr4 = cr4_read_shadow();
+	if (unlikely(cr4 != vmx->loaded_vmcs->host_state.cr4)) {
+		vmcs_writel(HOST_CR4, cr4);
+		vmx->loaded_vmcs->host_state.cr4 = cr4;
+	}
+
+	/* When single-stepping over STI and MOV SS, we must clear the
+	 * corresponding interruptibility bits in the guest state. Otherwise
+	 * vmentry fails as it then expects bit 14 (BS) in pending debug
+	 * exceptions being set, but that's not correct for the guest debugging
+	 * case. */
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
+		vmx_set_interrupt_shadow(vcpu, 0);
+
+	if (static_cpu_has(X86_FEATURE_PKU) &&
+	    kvm_read_cr4_bits(vcpu, X86_CR4_PKE) &&
+	    vcpu->arch.pkru != vmx->host_pkru)
+		__write_pkru(vcpu->arch.pkru);
+
+	pt_guest_enter(vmx);
+
+	atomic_switch_perf_msrs(vmx);
+
+	vmx_update_hv_timer(vcpu);
+
+	/*
+	 * If this vCPU has touched SPEC_CTRL, restore the guest's value if
+	 * it's non-zero. Since vmentry is serialising on affected CPUs, there
+	 * is no need to worry about the conditional branch over the wrmsr
+	 * being speculatively taken.
+	 */
+	x86_spec_ctrl_set_guest(vmx->spec_ctrl, 0);
+
+	__vmx_vcpu_run(vcpu, vmx);

 	/*
 	 * We do not use IBRS in the kernel. If this vCPU has used the
@ -6648,7 +6656,6 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
 	vmx_recover_nmi_blocking(vmx);
 	vmx_complete_interrupts(vmx);
 }
-STACK_FRAME_NON_STANDARD(vmx_vcpu_run);

 static struct kvm *vmx_vm_alloc(void)
 {
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@ -3834,6 +3834,8 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
 	case KVM_CAP_HYPERV_SYNIC2:
 		if (cap->args[0])
 			return -EINVAL;
+		/* fall through */
+
 	case KVM_CAP_HYPERV_SYNIC:
 		if (!irqchip_in_kernel(vcpu->kvm))
 			return -EINVAL;
@ -6480,8 +6482,7 @@ int x86_emulate_instruction(struct kvm_vcpu *vcpu,
 		toggle_interruptibility(vcpu, ctxt->interruptibility);
 		vcpu->arch.emulate_regs_need_sync_to_vcpu = false;
 		kvm_rip_write(vcpu, ctxt->eip);
-		if (r == EMULATE_DONE &&
-		    (ctxt->tf || (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)))
+		if (r == EMULATE_DONE && ctxt->tf)
 			kvm_vcpu_do_singlestep(vcpu, &r);
 		if (!ctxt->have_exception ||
 		    exception_type(ctxt->exception.vector) == EXCPT_TRAP)
@ -7093,10 +7094,10 @@ int kvm_emulate_hypercall(struct kvm_vcpu *vcpu)
 	case KVM_HC_CLOCK_PAIRING:
 		ret = kvm_pv_clock_pairing(vcpu, a0, a1);
 		break;
+#endif
 	case KVM_HC_SEND_IPI:
 		ret = kvm_pv_send_ipi(vcpu->kvm, a0, a1, a2, a3, op_64_bit);
 		break;
-#endif
 	default:
 		ret = -KVM_ENOSYS;
 		break;
@ -7937,6 +7938,7 @@ static inline int vcpu_block(struct kvm *kvm, struct kvm_vcpu *vcpu)
 		vcpu->arch.pv.pv_unhalted = false;
 		vcpu->arch.mp_state =
 			KVM_MP_STATE_RUNNABLE;
+		/* fall through */
 	case KVM_MP_STATE_RUNNABLE:
 		vcpu->arch.apf.halted = false;
 		break;
--- a/arch/x86/lib/kaslr.c
+++ b/arch/x86/lib/kaslr.c
@ -36,8 +36,8 @@ static inline u16 i8254(void)
 	u16 status, timer;

 	do {
-		outb(I8254_PORT_CONTROL,
-		     I8254_CMD_READBACK | I8254_SELECT_COUNTER0);
+		outb(I8254_CMD_READBACK | I8254_SELECT_COUNTER0,
+		     I8254_PORT_CONTROL);
 		status = inb(I8254_PORT_COUNTER0);
 		timer  = inb(I8254_PORT_COUNTER0);
 		timer |= inb(I8254_PORT_COUNTER0) << 8;
--- a/arch/x86/mm/mem_encrypt_identity.c
+++ b/arch/x86/mm/mem_encrypt_identity.c
@ -158,8 +158,8 @@ static void __init sme_populate_pgd(struct sme_populate_pgd_data *ppd)
 	pmd = pmd_offset(pud, ppd->vaddr);
 	if (pmd_none(*pmd)) {
 		pte = ppd->pgtable_area;
-		memset(pte, 0, sizeof(pte) * PTRS_PER_PTE);
-		ppd->pgtable_area += sizeof(pte) * PTRS_PER_PTE;
+		memset(pte, 0, sizeof(*pte) * PTRS_PER_PTE);
+		ppd->pgtable_area += sizeof(*pte) * PTRS_PER_PTE;
 		set_pmd(pmd, __pmd(PMD_FLAGS | __pa(pte)));
 	}

--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@ -898,10 +898,7 @@ static u64 xen_read_msr_safe(unsigned int msr, int *err)
 	val = native_read_msr_safe(msr, err);
 	switch (msr) {
 	case MSR_IA32_APICBASE:
-#ifdef CONFIG_X86_X2APIC
-		if (!(cpuid_ecx(1) & (1 << (X86_FEATURE_X2APIC & 31))))
-#endif
-			val &= ~X2APIC_ENABLE;
+		val &= ~X2APIC_ENABLE;
 		break;
 	}
 	return val;
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@ -361,8 +361,6 @@ void xen_timer_resume(void)
 {
 	int cpu;

-	pvclock_resume();
-
 	if (xen_clockevent != &xen_vcpuop_clockevent)
 		return;

@ -379,12 +377,15 @@ static const struct pv_time_ops xen_time_ops __initconst = {
 };

 static struct pvclock_vsyscall_time_info *xen_clock __read_mostly;
+static u64 xen_clock_value_saved;

 void xen_save_time_memory_area(void)
 {
 	struct vcpu_register_time_memory_area t;
 	int ret;

+	xen_clock_value_saved = xen_clocksource_read() - xen_sched_clock_offset;
+
 	if (!xen_clock)
 		return;

@ -404,7 +405,7 @@ void xen_restore_time_memory_area(void)
 	int ret;

 	if (!xen_clock)
-		return;
+		goto out;

 	t.addr.v = &xen_clock->pvti;

@ -421,6 +422,11 @@ void xen_restore_time_memory_area(void)
 	if (ret != 0)
 		pr_notice("Cannot restore secondary vcpu_time_info (err %d)",
 			  ret);
+
+out:
+	/* Need pvclock_resume() before using xen_clocksource_read(). */
+	pvclock_resume();
+	xen_sched_clock_offset = xen_clocksource_read() - xen_clock_value_saved;
 }

 static void xen_setup_vsyscall_time_info(void)
--- a/block/bfq-wf2q.c
+++ b/block/bfq-wf2q.c
@ -1154,15 +1154,14 @@ static void bfq_activate_requeue_entity(struct bfq_entity *entity,
 }

 /**
- * __bfq_deactivate_entity - deactivate an entity from its service tree.
- * @entity: the entity to deactivate.
+ * __bfq_deactivate_entity - update sched_data and service trees for
+ * entity, so as to represent entity as inactive
+ * @entity: the entity being deactivated.
 * @ins_into_idle_tree: if false, the entity will not be put into the
 *			idle tree.
 *
- * Deactivates an entity, independently of its previous state.  Must
- * be invoked only if entity is on a service tree. Extracts the entity
- * from that tree, and if necessary and allowed, puts it into the idle
- * tree.
+ * If necessary and allowed, puts entity into the idle tree. NOTE:
+ * entity may be on no tree if in service.
 */
 bool __bfq_deactivate_entity(struct bfq_entity *entity, bool ins_into_idle_tree)
 {
--- a/block/blk-mq-debugfs-zoned.c
+++ b/block/blk-mq-debugfs-zoned.c
@ -1,8 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
 * Copyright (C) 2017 Western Digital Corporation or its affiliates.
- *
- * This file is released under the GPL.
 */

 #include <linux/blkdev.h>
--- a/block/blk-mq-debugfs.c
+++ b/block/blk-mq-debugfs.c
@ -308,8 +308,9 @@ static const char *const cmd_flag_name[] = {
 	CMD_FLAG_NAME(PREFLUSH),
 	CMD_FLAG_NAME(RAHEAD),
 	CMD_FLAG_NAME(BACKGROUND),
-	CMD_FLAG_NAME(NOUNMAP),
 	CMD_FLAG_NAME(NOWAIT),
+	CMD_FLAG_NAME(NOUNMAP),
+	CMD_FLAG_NAME(HIPRI),
 };
 #undef CMD_FLAG_NAME

--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@ -1906,7 +1906,7 @@ static blk_qc_t blk_mq_make_request(struct request_queue *q, struct bio *bio)
 {
 	const int is_sync = op_is_sync(bio->bi_opf);
 	const int is_flush_fua = op_is_flush(bio->bi_opf);
-	struct blk_mq_alloc_data data = { .flags = 0, .cmd_flags = bio->bi_opf };
+	struct blk_mq_alloc_data data = { .flags = 0};
 	struct request *rq;
 	struct blk_plug *plug;
 	struct request *same_queue_rq = NULL;
@ -1928,6 +1928,7 @@ static blk_qc_t blk_mq_make_request(struct request_queue *q, struct bio *bio)

 	rq_qos_throttle(q, bio);

+	data.cmd_flags = bio->bi_opf;
 	rq = blk_mq_get_request(q, bio, &data);
 	if (unlikely(!rq)) {
 		rq_qos_cleanup(q, bio);
--- a/block/blk-wbt.c
+++ b/block/blk-wbt.c
@ -597,7 +597,7 @@ static void wbt_track(struct rq_qos *rqos, struct request *rq, struct bio *bio)
 	rq->wbt_flags |= bio_to_wbt_flags(rwb, bio);
 }

-void wbt_issue(struct rq_qos *rqos, struct request *rq)
+static void wbt_issue(struct rq_qos *rqos, struct request *rq)
 {
 	struct rq_wb *rwb = RQWB(rqos);

@ -617,7 +617,7 @@ void wbt_issue(struct rq_qos *rqos, struct request *rq)
 	}
 }

-void wbt_requeue(struct rq_qos *rqos, struct request *rq)
+static void wbt_requeue(struct rq_qos *rqos, struct request *rq)
 {
 	struct rq_wb *rwb = RQWB(rqos);
 	if (!rwb_enabled(rwb))
--- a/crypto/adiantum.c
+++ b/crypto/adiantum.c
@ -539,6 +539,8 @@ static int adiantum_create(struct crypto_template *tmpl, struct rtattr **tb)
 	ictx = skcipher_instance_ctx(inst);

 	/* Stream cipher, e.g. "xchacha12" */
+	crypto_set_skcipher_spawn(&ictx->streamcipher_spawn,
+				  skcipher_crypto_instance(inst));
 	err = crypto_grab_skcipher(&ictx->streamcipher_spawn, streamcipher_name,
 				   0, crypto_requires_sync(algt->type,
 							   algt->mask));
@ -547,6 +549,8 @@ static int adiantum_create(struct crypto_template *tmpl, struct rtattr **tb)
 	streamcipher_alg = crypto_spawn_skcipher_alg(&ictx->streamcipher_spawn);

 	/* Block cipher, e.g. "aes" */
+	crypto_set_spawn(&ictx->blockcipher_spawn,
+			 skcipher_crypto_instance(inst));
 	err = crypto_grab_spawn(&ictx->blockcipher_spawn, blockcipher_name,
 				CRYPTO_ALG_TYPE_CIPHER, CRYPTO_ALG_TYPE_MASK);
 	if (err)
--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@ -58,14 +58,22 @@ int crypto_authenc_extractkeys(struct crypto_authenc_keys *keys, const u8 *key,
 		return -EINVAL;
 	if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
 		return -EINVAL;
-	if (RTA_PAYLOAD(rta) < sizeof(*param))
+
+	/*
+	 * RTA_OK() didn't align the rtattr's payload when validating that it
+	 * fits in the buffer.  Yet, the keys should start on the next 4-byte
+	 * aligned boundary.  To avoid confusion, require that the rtattr
+	 * payload be exactly the param struct, which has a 4-byte aligned size.
+	 */
+	if (RTA_PAYLOAD(rta) != sizeof(*param))
 		return -EINVAL;
+	BUILD_BUG_ON(sizeof(*param) % RTA_ALIGNTO);

 	param = RTA_DATA(rta);
 	keys->enckeylen = be32_to_cpu(param->enckeylen);

-	key += RTA_ALIGN(rta->rta_len);
-	keylen -= RTA_ALIGN(rta->rta_len);
+	key += rta->rta_len;
+	keylen -= rta->rta_len;

 	if (keylen < keys->enckeylen)
 		return -EINVAL;
--- a/crypto/authencesn.c
+++ b/crypto/authencesn.c
@ -279,7 +279,7 @@ static void authenc_esn_verify_ahash_done(struct crypto_async_request *areq,
 	struct aead_request *req = areq->data;

 	err = err ?: crypto_authenc_esn_decrypt_tail(req, 0);
-	aead_request_complete(req, err);
+	authenc_esn_request_complete(req, err);
 }

 static int crypto_authenc_esn_decrypt(struct aead_request *req)
--- a/crypto/sm3_generic.c
+++ b/crypto/sm3_generic.c
@ -100,7 +100,7 @@ static void sm3_compress(u32 *w, u32 *wt, u32 *m)

 	for (i = 0; i <= 63; i++) {

-		ss1 = rol32((rol32(a, 12) + e + rol32(t(i), i)), 7);
+		ss1 = rol32((rol32(a, 12) + e + rol32(t(i), i & 31)), 7);

 		ss2 = ss1 ^ rol32(a, 12);

--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@ -41,7 +41,8 @@ acpi-y				+= ec.o
 acpi-$(CONFIG_ACPI_DOCK)	+= dock.o
 acpi-$(CONFIG_PCI)		+= pci_root.o pci_link.o pci_irq.o
 obj-$(CONFIG_ACPI_MCFG)		+= pci_mcfg.o
-acpi-y				+= acpi_lpss.o acpi_apd.o
+acpi-$(CONFIG_PCI)		+= acpi_lpss.o
+acpi-y				+= acpi_apd.o
 acpi-y				+= acpi_platform.o
 acpi-y				+= acpi_pnp.o
 acpi-$(CONFIG_ARM_AMBA)	+= acpi_amba.o
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@ -1054,18 +1054,6 @@ void __init acpi_early_init(void)
 		goto error0;
 	}

-	/*
-	 * ACPI 2.0 requires the EC driver to be loaded and work before
-	 * the EC device is found in the namespace (i.e. before
-	 * acpi_load_tables() is called).
-	 *
-	 * This is accomplished by looking for the ECDT table, and getting
-	 * the EC parameters out of that.
-	 *
-	 * Ignore the result. Not having an ECDT is not fatal.
-	 */
-	status = acpi_ec_ecdt_probe();
-
 #ifdef CONFIG_X86
 	if (!acpi_ioapic) {
 		/* compatible (0) means level (3) */
@ -1142,6 +1130,18 @@ static int __init acpi_bus_init(void)
 		goto error1;
 	}

+	/*
+	 * ACPI 2.0 requires the EC driver to be loaded and work before the EC
+	 * device is found in the namespace.
+	 *
+	 * This is accomplished by looking for the ECDT table and getting the EC
+	 * parameters out of that.
+	 *
+	 * Do that before calling acpi_initialize_objects() which may trigger EC
+	 * address space accesses.
+	 */
+	acpi_ec_ecdt_probe();
+
 	status = acpi_enable_subsystem(ACPI_NO_ACPI_ENABLE);
 	if (ACPI_FAILURE(status)) {
 		printk(KERN_ERR PREFIX
--- a/Show More
+++ b/Show More