nvmem: imx-ocotp: Add i.MX7D timing write clock setup support

This patch adds logic to correctly setup the write timing parameters
when blowing an OTP fuse for the i.MX7S/D.

Fixes: 0642bac7da ("nvmem: imx-ocotp: add write support")

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Bryan O'Donoghue 2017-10-24 10:54:31 +01:00 committed by Greg Kroah-Hartman
parent b50cb68f16
commit 828ae7a47c

View File

@ -50,17 +50,14 @@
#define IMX_OCOTP_BM_CTRL_ERROR 0x00000200
#define IMX_OCOTP_BM_CTRL_REL_SHADOWS 0x00000400
#define DEF_RELAX 20 /* > 16.5ns */
#define DEF_RELAX 20 /* > 16.5ns */
#define DEF_FSOURCE 1001 /* > 1000 ns */
#define DEF_STROBE_PROG 10000 /* IPG clocks */
#define IMX_OCOTP_WR_UNLOCK 0x3E770000
#define IMX_OCOTP_READ_LOCKED_VAL 0xBADABADA
static DEFINE_MUTEX(ocotp_mutex);
struct ocotp_params {
unsigned int nregs;
unsigned int bank_address_words;
};
struct ocotp_priv {
struct device *dev;
struct clk *clk;
@ -69,6 +66,12 @@ struct ocotp_priv {
struct nvmem_config *config;
};
struct ocotp_params {
unsigned int nregs;
unsigned int bank_address_words;
void (*set_timing)(struct ocotp_priv *priv);
};
static int imx_ocotp_wait_for_busy(void __iomem *base, u32 flags)
{
int count;
@ -193,6 +196,27 @@ static void imx_ocotp_set_imx6_timing(struct ocotp_priv *priv)
writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
}
static void imx_ocotp_set_imx7_timing(struct ocotp_priv *priv)
{
unsigned long clk_rate = 0;
u64 fsource, strobe_prog;
u32 timing = 0;
/* i.MX 7Solo Applications Processor Reference Manual, Rev. 0.1
* 6.4.3.3
*/
clk_rate = clk_get_rate(priv->clk);
fsource = DIV_ROUND_UP_ULL((u64)clk_rate * DEF_FSOURCE,
NSEC_PER_SEC) + 1;
strobe_prog = DIV_ROUND_CLOSEST_ULL((u64)clk_rate * DEF_STROBE_PROG,
NSEC_PER_SEC) + 1;
timing = strobe_prog & 0x00000FFF;
timing |= (fsource << 12) & 0x000FF000;
writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
}
static int imx_ocotp_write(void *context, unsigned int offset, void *val,
size_t bytes)
{
@ -219,7 +243,7 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
}
/* Setup the write timing values */
imx_ocotp_set_imx6_timing(priv);
priv->params->set_timing(priv);
/* 47.3.1.3.2
* Check that HW_OCOTP_CTRL[BUSY] and HW_OCOTP_CTRL[ERROR] are clear.
@ -376,26 +400,31 @@ static struct nvmem_config imx_ocotp_nvmem_config = {
static const struct ocotp_params imx6q_params = {
.nregs = 128,
.bank_address_words = 0,
.set_timing = imx_ocotp_set_imx6_timing,
};
static const struct ocotp_params imx6sl_params = {
.nregs = 64,
.bank_address_words = 0,
.set_timing = imx_ocotp_set_imx6_timing,
};
static const struct ocotp_params imx6sx_params = {
.nregs = 128,
.bank_address_words = 0,
.set_timing = imx_ocotp_set_imx6_timing,
};
static const struct ocotp_params imx6ul_params = {
.nregs = 128,
.bank_address_words = 0,
.set_timing = imx_ocotp_set_imx6_timing,
};
static const struct ocotp_params imx7d_params = {
.nregs = 64,
.bank_address_words = 4,
.set_timing = imx_ocotp_set_imx7_timing,
};
static const struct of_device_id imx_ocotp_dt_ids[] = {